2011 Volume 3.0 Buyer's Guide

over

f e at u r i n g

new

products

2011 - $4.95

industry first

boosted rail amplifier technology

New Products 3SIXTY.3 Digital Signal Processor Custom Shop Constant Power ad Amplifiers Punch Full Range D Amplifiers

Punch Boosted Rail Amplifiers Prime Full Range D Amplifiers Prime 5 Channel Amplifier Power T1 15� Subwoofers

Power T0 Subwoofers Punch P3, P2 & P1 Subwoofers Punch P3, P2 & P1 Loaded Punch Grilles

Prime R2 & R2S Subwoofers Power T5 Components Power T3 Components

9 //3SIXTY.3

The ultimate signal processor

5 //Processors

15 //CUSTOM SHOP

Check out the 2011 editions

21 //POWER ad AMPLIFIERS High fidelity full range class D

11 //AMPLIFIERS

25 //PUNCH FRD AMPLIFIERS Low current consuming design

27 //PUNCH BR AMPLIFIERS NEW Boosted Rail topology

33 //SUBWOOFERS

31 //PRIME FRD AMPLIFIERS Affordable full range class D

41 //POWER T0 SUBWOOFERS

Bridge the gap from POWER to PUNCH

57 //SPEAKERS

43 //NEW PUNCH SUBWOOFERS P3, P2 & P1 better than ever

51 //PUNCH LOADED

Same high-output w/ the NEW subs

73 //MARINE 81 //ACCESSORIES 87 //SPECIFICATIONS NEW FEATURE Download http://gettag.mobi to your mobile phone and then take a photo to connect with online content.

53 //PRIME R2/R2S SUBWOOFERS Increased power handling or shallow

61 //POWER T5 COMPONENTS

Breaking new ground in audiophile speakers

63 //POWER T3 COMPONENTS

T3 reaps the benefits of T5 speakers

79 //MARINE SOURCE UNITS Connecting all your media

Š2011 Rockford Corporation. All Rights Reserved.

ROCKFORD FOSGATE, PUNCH, 3SIXTY and associated logos where applicable are registered trademarks of Rockford Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners.

Specifications subject to change without notice.

SEAMLESS INTEGRATION

The 3Sixty.3 is the ultimate signal processor from Rockford Fosgate.

Functioning as an OEM integration "black box" or a complete surround sound Digital Signal Processor.

BALANCED LINE DRIVER ADD SOME JUICE

If your source unit has low output voltage or induced noise, the RF-BLD is a perfect addition to any systems needs.

3SIXTY Proprietary Rockford Technology When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has lead us to develop proprietary amplifier topologies and speaker/amplifier technologies that put a spin on the normal and make it Rockford.

bluetooth All features are controlled via Bluetooth or cable interface on Apple or PC capable devices along with A2DP wireless audio streaming via optional dongle

microphone EZ set-up which includes: auto gain, auto equalization and auto tuning via microphone.

RF link Rockford’s proprietary RF Link is a bus-power component connection system enabling integration and control of all RF Link equipped products. The use of this system allows for the expansion of auxiliary controls and managed system turn on.

7

2011 BUYERS GUIDE 3SIXTY TECHNOLOGIES

3SIXTY GRAPHIC USER INTERFACE (GUI) 3Sixty interactive graphic user interface allows for control of the crossover type, slope, high/low pass filter, the 248 band parametric eq, phase, and time delay.

INPUT CHANNEL CONFIGURATOR

OUTPUT CHANNEL CONFIGURATOR

CHANNEL SUMMING CONFIGURATOR

ADJUSTING INPUT GAIN

NEW

3 S I X T Y. 3 S I G N A L P R O C E S S O R

3SIXTY.3

Frequency Normalization of Audio Signals US Patent # 7,778,718,B2

You just invested in the latest factory navigation unit, the last thing you want to do is have to replace it to build a killer system. Don’t worry, Rockford Fosgate’s 3Sixty is the ultimate tool to integrate your factory head-unit and give you the control to incorporate multiple amps, sub-solutions and speakers. Looking for the most state of the art tuning device on the market? 3Sixty not only acts as the bridge from factory to performance, but also includes SERIOUS tuning capability. The 3Sixty computer based GUI (Graphic User Interface) is easy to use if you’re just getting into performance audio or are a seasoned pro.

• 31 band parametric EQ per channel • Phase control • Time delay • Easy microphone set-up

9

2011 BUYERS GUIDE

• Interactive graphic user interface • iPhone® /iPod® /iPad® charging (optional cable- 3SIXTY.CABLE) • A2DP wireless audio streaming (optional dongle- 3SIXTY.DONGLE)

BALANCED LINE DRIVER

RF-BLD

Integrate to a factory head unit or add some juice to a low-voltage aftermarket unit, the 3Sixty Balanced Line Driver (BLD) will get your signal across.

Featuring ‘Balanced Differential’ or ‘Single Ended’ mode, its high voltage output combined with a low output impedance will drive large arrays of amplifiers without breaking a sweat.

Input/Output

AUX Inputs

Input Voltage

Output Voltage

3SIXTY.3

8 Speaker/RCA Balanced/Unbalanced

Stereo/Digital (SPDIF)

2V-24V

5V RMS Unbalanced/Balanced

RF-BLD

2 Speaker/RCA Balanced/Unbalanced

N/A

650mV-10.5V

11V RMS Unbalanced 22V RMS Balanced

Auto Turn-On

Remote

Dimensions

6V DC Offset

Level/PEQ/ EQ Presets

H 1.75” x W 5.125” x L 9.25”

6V DC Offset

N/A

H 1.32” x W 5.90” x L 4.09”

PUSH THE ENVELOPE

POWER amplifiers are the culmination of over 30 years of pushing the envelope in amplifier technology. These amplifiers deliver unprecedented power & control in the hands of the most discriminating audio fanatic.

THE STANDARD

Rockford Fosgate’s PUNCH has revolutionized the industry.

PUNCH amps combine Rockford’s heritage with the latest technology in a compact package.

When you’re ready to haul the mail, PUNCH amps will get the job done.

THROW DOWN

Breaking new ground in both performance and value, PRIME amplifiers take advantage of Rockford technologies at a level that everyone can attain.

AMPLIFIERS Proprietary Rockford Technology When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has lead us to develop proprietary amplifier topologies and speaker/amplifier technologies that put a spin on the normal and make it Rockford.

+20 +18 +16 +14

Punch Equalization

+12

U.S. Patent (21,323)

+10 +8 +6 +4 +2 -0 -2

20

50

100

200

BASS

500

Hz

1k

2k

5k

10k 20k

TREBLE

In the early 70’s, Jim Fosgate studied the acoustical properties of automobiles by using a real time analyzer.

Jim discovered multiple problems common in all vehicles; a midbass hump, a steep high frequency roll off and reduced bass response. This research lead to adding Punch EQ to Rockford Fosgate amps to help correct the acoustical deficiencies found in the automotive listening environment. The new Punch EQ2 is an on-board equalization circuit that when set to Low-Pass (LP) operation, becomes a variable Bass Boost. When set to High-Pass (HP) operation, it acts as a variable Mid-Bass and Treble Boost. When set to All Pass (AP) operation, both Bass and Treble frequencies are boosted.

HEATSINK

ALUMINIUM

MOSFET

THERMAL GREASE CERAMIC

Maximum Efficiency Heat Sink Application MEHSA3 heat management technology takes heat sink efficiency to a new level. The key was to create a dielectric layer between the ceramic topside and the aluminum base that retains all of the electrical isolation and capacitive coupling of the early material increasing its thermal conductivity. The higher power handling results in a 20% reduction in thermal impedance.

4/2/1 The ability to deliver continuous total RMS rated power to the speaker(s) in any impedance ranging between 4 ohm through 1 ohm.

13 2011 BUYERS GUIDE AMPLIFIER TECHNOLOGIES

T2500-1bdCP

WITH

WITHOUT

3000

2500

240

220

200

180

160

140

120

100

80

2000 20

Music and speakers have a dynamic relationship. As the frequency of music varies, so does the impedance of the speaker. Rockford Fosgate’s Constant Power circuit design actively monitors and increases voltage and current as the speaker’s impedance rises with music. Resulting in up to a 25% increase in total amplifier power.

60

U.S. Patent (Patent Issued)

3500

40

Constant Power

Output Power

4000

Frequency

Dynamic Thermal Management U.S. Patent (Patent Pending)

Our engineers at Rockford Fosgate have developed an award winning cooling design called DTM (Dynamic Thermal Management). This patent pending design seamlessly manages the output and power supply temperatures, while evenly distributing the excess heat across the entire amplifier.

THERMAL IMAGE WITHOUT

THERMAL IMAGE WITH

Non Multiplying Advanced Decision Safe output protection is handled by our proprietary NOMAD circuit. NOMAD is an analog computer designed to calculate the maximum level of safe current allowable for each output device (based on their instantaneous voltage drop). This allows the protection to be much more precise than ever before; offering protection against: • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

CEA-2006 Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier’s output power ratings are REAL POWER numbers, not inflated marketing ratings.

rockfordfosgate.com Don’t forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Amp Wire Calculator to optimize output with properly sized wire.

Cus·tom/ˈkəstəm/

Adjective: Made or done to order for a particular customer. For some, off the shelf is simply not enough.

We created Custom Shop products for the trend-setters, the taste-makers and the all around bad ass. Hand airbrushed by world-renown artists and painters, these themes and color combinations can be mixed and matched to create a customized masterpiece. Like priceless art and rare cars, these amplifiers only gain value with time. These multi-stage designs range from hot rod and tattoo-inspired paint schemes to a variety of metallic, pearlescent, and the ultimate DREAMSCAPE editions.

dreamscape

monsters theme

15 2011 BUYERS GUIDE

bandana

gear

patriot

fire

Dreamscape

This is the opposite of mass production. Each design is different, a mystery, and unique.

The Dreamscape editions take it even further. These free handed airbrushed designs are NEVER duplicated to ensure you get 1 of 1. No matter how much money your friend, your neighbor or even your enemy spends, they can never get your design. Dreamscape designs are completely up to the artist’s imagination on what you will get.

There have been monsters, girls, aliens, dogs, monkeys, guns, you name it we have seen it. These designs are wicked to say the least.

vegas theme

eme playboy th

theme nightmare *Above themes are for examples only

POWER AMPLIFIERS

T1500-1bdCP

Power Series amplifiers are the best your money can buy. The heart of ANY system, how your amplifier performs is directly related to how loud, long and clear your system will play. Rockford Fosgate Power Series two & four channel amplifiers give flexibility to your system design and the bd mono amps, with Constant Power, are the most powerful amps we’ve ever developed. Are you ready to take your system to the highest level and beyond?

TRANS•ana

Class BD

(TRANS conductance Active Nodal Amplifier)

U.S. Patent (RE40550)

The trans•ana topology operates the output stage with its full voltage gain, which allows the input stage to operate from a low voltage regulated supply. The signal is then shifted up in level to the high voltage section by the driver stage which forms an active node at ultrasonic frequencies. This results in a very stable, highly linear operation.

The Rockford Fosgate bd topology is more efficient than typical class AB and has lower distortion than class D designs. Rockford bd amplifiers are 75-80% efficient vs. 2060% efficient class ab amplifiers. Delivering more power from your amplifier with less drain on your vehicles electrical and charging system.

17 2011 BUYERS GUIDE

NOMAD

MEHSATM DTMTM

24dB/OCT Crossover

4 AWG C-Clamp Connectors Punch EQ w/ Optional PEQ

T1500-1bdCP

Differential RCA Inputs

AVERAGE EFFICIENCY

THERMAL MASS PER INCH

400-1500

WATTS

RMS POWER RANGE

Continuous rated power at lowest impedance.

Rated Power

Continuous power @ 4Ω

326 GRAMS

75.4 %

Frequency Response

THD+N@ Rated Power

Input Sensitivity

S/N Ratio

Channel Separation

Dimensions

T400-2

120x2 @ 4 OHMS 200x2 @ 2 OHMS 400x1 @ 4 OHMS BRIDGED

20Hz-20kHz

<0.05%

150MV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L 11.41”

T600-2

200x2 @ 4 OHMS 300x2 @ 2 OHMS 600x1 @ 4 OHMS BRIDGED

20Hz-20kHz

<0.05%

150MV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L 13.66”

T400-4

60x4 @ 4 OHMS 100x4 @ 2 OHMS 200x2 @ 4 OHMS BRIDGED

20Hz-20kHz

<0.05%

150MV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L 13.66”

T600-4

100x4 @ 4 OHMS 150x4 @ 2 OHMS 300x2 @ 4 OHMS BRIDGED

20Hz-20kHz

<0.05%

150MV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L 14.91”

T500-1bdCP

300x1 @ 4 OHMS 500x1 @ 2 OHMS 500x1 @ 1 OHMS

20Hz-250kHz

<0.5%

150MV - 5V

>100dB

N/A

T1000-1bdCP

700x1 @ 4 OHMS 1000x1 @ 2 OHMS 1000x1 @ 1 OHMS

20Hz-250kHz

<0.8%

150MV - 5V

>100dB

N/A

T1500-1bdCP

1000x1 @ 4 OHMS 1500x1 @ 2 OHMS 1500x1 @ 1 OHMS

20Hz-250kHz

<0.8%

150MV - 5V

>100dB

N/A

(SMALL CHASSIS)

(MEDIUM CHASSIS)

(MEDIUM CHASSIS)

(LARGE CHASSIS)

H 2.14” x W 8.14” x L 11.41”

(SMALL CHASSIS)

H 2.14” x W 8.14” x L 13.66”

(MEDIUM CHASSIS)

H 2.14” x W 8.14” x L 14.91”

(LARGE CHASSIS)

POWER XL-AMPLIFIERS

T2500-1bdCP

Class BD U.S. Patent (RE40550)

The Rockford Fosgate bd topology is more efficient than typical class AB and has lower distortion than class D designs. Rockford bd amplifiers are 75-80% efficient vs. 20-60% efficient class ab amplifiers. Delivering more power from your amplifier with less drain on your vehicles electrical and charging system.

19 2011 BUYERS GUIDE

Power XL Series amplifiers with Constant Power are the most powerful amplifiers on the market PERIOD. Constant Power delivers up to 25% more power across all impedance levels resulting in a listening experience thatâ&#x20AC;&#x2122;s cleaner, louder and more impressive than ever before. Rockfordâ&#x20AC;&#x2122;s proprietary technology ACTIVELY monitors your music and adjusts power to MAXIMIZE output.

POWER/SIGNAL VU METERS NOMAD DTMTM

MEHSATM

24dB/OCT Crossover

Punch EQ w/ Optional PEQ

T2500-1bdCP

Balanced Differential Panel Mount RCA Inputs

BDSync or Master/Slave

1/0 AWG. Stealth ConnectorS

AVERAGE EFFICIENCY

THERMAL MASS PER INCH

2500

WATTS

RMS POWER RANGE

Continuous rated power at lowest impedance.

Rated Power T2500-1bdCP

1500x1 @ 4 OHMS 2500x1 @ 2 OHMS 2500x1 @ 1 OHMS

Continuous power @ 4Ω

326 GRAMS

77.3 %

Frequency Response

THD+N@ Rated Power

Input Sensitivity

S/N Ratio

Channel Separation

20Hz-250kHz

<0.8%

150MV - 5V

>100dB

N/A

Dimensions H 2.14” x W 8.14” x L 21.90”

(X-LARGE CHASSIS)

POWER AD AMPLIFIERS

T1000-4ad

Full Range Class ad U.S. Patent (Patent Pending)

The Rockford Fosgate ad topology brings our high efficiency bd amplifier design to a full range application.

Using our Dynamic Frequency Switching to increase the switching frequency during lower output levels for better signal resolution. Coupled with Post Choke Feedback Filtering to compare the input signal to the output signal at the speaker connector removing any unwanted distortion.

These technologies eliminate the inherent switching noise associated with typical class D designs.

21 2011 BUYERS GUIDE

Power series ad technology is one of a kind. High power in a small chassis, independent channel regulation that constantly monitors the power output for maximum performance, and all the customization features you expect from our top of the line Power series amplifiers.

NEW 4-Point Thermal Monitoring MEHSATM

24dB/OCT Crossover Punch EQ w/ Optional PEQ 4 AWG C-Clamp Connectors

T1000-4ad

Differential RCA Inputs

AVERAGE EFFICIENCY

THERMAL MASS PER INCH

800-1000

WATTS

RMS POWER RANGE

Continuous rated power at lowest impedance.

Continuous power @ 4Ω

326 GRAMS

84.5 %

Frequency Response

THD+N@ Rated Power

Input Sensitivity

S/N Ratio

Channel Separation

Dimensions

20Hz-20kHz

<1.0%

150MV - 5V

>95dB

>50dB

H 2.14” x W 8.14” x L 13.66”

T800-4AD

150x4 @ 4 OHMS 150x4 @ 2 OHMS 200x4 @ 1 OHMS 300x2 @ 4 OHMS BRIDGED 400x2 @ 2 OHMS BRIDGED

20Hz-20kHz

<1.0%

150MV - 5V

>95dB

>50dB

H 2.14” x W 8.14” x L 14.91”

T1000-4AD

250x4 @ 4 OHMS 250x4 @ 2 OHMS 250x4 @ 1 OHMS 500x2 @ 4 OHMS BRIDGED 500x2 @ 2 OHMS BRIDGED

Rated Power

(MEDIUM CHASSIS)

(LARGE CHASSIS)

PUNCH AMPLIFIERS

P1000-1bd

For over 25 years, Punch amplifiers have set the standard in the car audio amplifier industry and they continue to do so today. Each of the Punch family amplifiers reproduce sonic perfection along with impressive power in a compact chassis. It’s the reason that they have become the most popular amplifiers in the world.

THERMAL MASS PER INCH

200-1000

WATTS

RMS POWER RANGE

Continuous rated power at lowest impedance.

275 GRAMS

TRANS•ana (TRANS conductance Active Nodal Amplifier)

The trans•ana topology operates the output stage with its full voltage gain, which allows the input stage to operate from a low voltage regulated supply. The signal is then shifted up in level to the high voltage section by the driver stage which forms an active node at ultrasonic frequencies. This results in very stable, highly linear operation.

23 2011 BUYERS GUIDE

AVERAGE EFFICIENCY Continuous power @ 4Ω

73.1 %

Class BD U.S. Patent (RE40550)

The Rockford Fosgate bd topology is more efficient than typical class AB and has lower distortion than class D designs. Rockford bd amplifiers are 75-80% efficient vs. 2060% efficient class ab amplifiers. Delivering more power from your amplifier with less drain on your vehicles electrical and charging system.

DTMTM

MEHSATM

NOMAD

12dB/OCT Crossover

Punch EQ w/ Optional PEQ

4 AWG C-Clamp Connectors

Differential RCA Inputs

P1000-1bd

Rated Power

Frequency Response

THD+N@ Rated Power

Input Sensitivity

S/N Ratio

Channel Separation

Dimensions

P200-2

50x2 @ 4 OHMS 100x2 @ 2 OHMS 200x1 @ 4 OHMS BRIDGED

20Hz-20kHz

<0.05%

150MV - 5V

>105dB >105dB

>50dB

H 2.20” x W 7.70” x L 8.90”

P300-2

75x2 @ 4 OHMS 150x2 @ 2 OHMS 300x1 @ 4 OHMS BRIDGED

20Hz-20kHz

<0.05%

150MV - 5V

>105dB

>50dB

H 2.20” x W 7.70” x L 8.90”

P400-2

100x2 @ 4 OHMS 200x2 @ 2 OHMS 400x1 @ 4 OHMS BRIDGED

20Hz-20kHz

<0.05%

150MV - 5V

>105dB

>50dB

H 2.20” x W 7.70” x L 10.30”

P500-2

125x2 @ 4 OHMS 250x2 @ 2 OHMS 500x1 @ 4 OHMS BRIDGED

20Hz-20kHz

<0.05%

150MV - 5V

>105dB

>50dB

H 2.20” x W 7.70” x L 13.00”

P400-4

50x4 @ 4 OHMS 100x4 @ 2 OHMS 200x2 @ 4 OHMS BRIDGED

20Hz-20kHz

<0.05%

150MV - 5V

>105dB

>50dB

H 2.20” x W 7.70” x L 13.00”

P500-4

60x4 @ 4 OHMS 125x4 @ 2 OHMS 250x2 @ 4 OHMS BRIDGED

20Hz-20kHz

<0.05%

150MV - 5V

>105dB

>50dB

H 2.20” x W 7.70” x L 13.00”

P300-1

150x1 @ 4 OHMS 300x1 @ 2 OHMS

20Hz-20kHz

<0.1%

150MV - 5V

>100dB

N/A

P400-1

200x1 @ 4 OHMS 400x1 @ 2 OHMS

20Hz-20kHz

<0.1%

150MV - 5V

>100dB

N/A

P500-1bd

200x1 @ 4 OHMS 400x1 @ 2 OHMS 500x1 @ 1 OHMS

20Hz-250kHz

<0.8%

150MV - 5V

>100dB

N/A

P700-1bd

225x1 @ 4 OHMS 450x1 @ 2 OHMS 700x1 @ 1 OHMS

20Hz-250kHz

<0.8%

150MV - 5V

>100dB

N/A

P1000-1bd

250x1 @ 4 OHMS 500x1 @ 2 OHMS 1000x1 @ 1 OHMS

20Hz-250kHz

<0.8%

150MV - 5V

>100dB

N/A

(MINI CHASSIS)

(MINI CHASSIS)

(SMALL CHASSIS)

(MEDIUM CHASSIS)

(MEDIUM CHASSIS)

(MEDIUM CHASSIS)

H 2.20” x W 7.70” x L 8.90”

(MINI CHASSIS)

H 2.20” x W 7.70” x L 8.90”

(MINI CHASSIS)

H 2.20” x W 7.70” x L 10.30”

(SMALL CHASSIS)

H 2.20” x W 7.70” x L 10.30”

(SMALL CHASSIS)

H 2.20” x W 7.70” x L 14.40”

(LARGE CHASSIS)

PUNCH FRD AMPLIFIERS

P500X4D

CLASS D / FULL RANGE CLASS D High efficiency amplifier design that reduces current consumption from the charging system.

25 2011 BUYERS GUIDE

Packed with all the features you expect from a Punch ampliferâ&#x20AC;Śhoused in a smaller package and ultra efficient with new Full Range Class D technology. The Punch FRD amplifiers are designed for versatility â&#x20AC;&#x201C;lower current consuming multi amp systems, space limited installs, and single amp upgrades are just the start.

NEW Punch EQ w/ Optional Level Control*

Discrete Power/Protection Indicator

Removable Control Cover

12dB/OCT Crossover

Differential RCA Inputs

Set-Screw Connectors

P500X4D

AVERAGE EFFICIENCY

THERMAL MASS PER INCH WATTS

500-1000

Continuous rated power at lowest impedance.

Rated Power

Continuous power @ 4Ω

264 GRAMS

RMS POWER RANGE

87.2 %

Frequency Response

THD+N@ Rated Power

Input Sensitivity

S/N Ratio

Channel Separation

Dimensions

P500X4D

75x4 @ 4 OHMS 125x4 @ 2 OHMS 250x2 @ 4 OHMS BRIDGED

20Hz-20kHz

<0.1%

150MV - 5V

>100dB

>50dB

H 2.20” x W 8.10” x L 10.70”

P1000X4D

150x4 @ 4 OHMS 250x4 @ 2 OHMS 500x2 @ 4 OHMS BRIDGED

20Hz-20kHz

<0.1%

150MV - 5V

>100dB

>50dB

H 2.20” x W 8.10” x L 11.90”

P1000X5D

75x4 + 200x1 @ 4 OHMS 125x4 + 500x1 @ 2 OHMS 250x2 + N/A @ 4 OHMS BRIDGED

20Hz-20kHz

<0.05%

150MV - 5V

>105dB

>50dB

H 2.20” x W 8.10” x L 10.70”

P1000X1D

500x1 @ 4 OHMS 1000x1 @ 2 OHMS 1000x1 @ 1 OHMS

20Hz-250kHz

<0.8%

150MV - 5V

>100dB

N/A

H 2.20” x W 8.10” x L 11.90”

*P1000X5D & P1000X1D

PUNCH BR AMPLIFIERS

PBR300X1

Ultra compact and featuring Rockford Fosgate’s patent pending Boosted Rail technology, PBR300X4 and PBR300X1 are breaking new ground in efficient amplifier design. If you have limited space in your vehicle, want to add audio to your motorcycle, or need a simple installation solution… the new Punch BR amps are for you.

COUPLED

SWITCHED

COUPLED/SWITCHED

27 2011 BUYERS GUIDE

Boosted Rail Technology U.S. Patent (Patent Pending)

To achieve higher efficiency with lower distortion, Rockford’s br topology combines, Cycle-by-Cycle, an indirectly coupled high/low voltage rail linear topology with a switched high/ low voltage linear rail topology. This combination yields an unsurpassed power density (watts per cubic inch).

NEW 12DB/OCT Crossover

Boosted RaiL MEHSATM

Boost Indicator

Variable High Level Adjust

PBR300X1

Optional PEQ

10 AWG Molex Connector

RCA/Speaker Level Inputs W/ 6V DC Offset

THERMAL MASS PER INCH RMS POWER RANGE

Continuous power @ 4Ω

101

WATTS

300

AVERAGE EFFICIENCY

GRAMS

Continuous rated power at lowest impedance.

68.3 %

Rated Power

Frequency Response

THD+N@ Rated Power

Input Sensitivity

S/N Ratio

Channel Separation

Dimensions

PBR300X4

75x4 @ 4 OHMS

20Hz-20kHz

<0.5%

150MV - 11V

>100dB

>50dB

H 1.50” x W 4.25” x L 6.75”

PBR300X1

75x1 @ 4 OHMS 150x1 @ 2 OHMS 300x1 @ 1 OHMS

20Hz-250Hz

<0.2%

150MV - 11V

>105dB

N/A

H 1.50” x W 4.25” x L 6.75”

PRIME AMPLIFIERS

R600-5

Breaking new ground in both performance and value, PRIME amplifiers take advantage of Rockford technologies at a level that everyone can attain. Available in six different models and in two compact chassis sizes, with a 5-Channel model added this year.

Now more than ever, itâ&#x20AC;&#x2122;s easy to get Rockford Fosgate amplifier DNA into your car audio system.

CLASS D

CLASS AB

High efficiency amplifier design that reduces current consumption from the charging system.

The combination of a class B power output with the class A low distortion attributes make class AB the most common amplifier topology in the electronics industry.

29 2011 BUYERS GUIDE

Differential RCA Inputs

REMOTE PUNCH LEVEL CONTROL

4 AWG SWWS (SMASH WIRE W/ SCREW)

R600-5

THERMAL MASS PER INCH RMS POWER RANGE

Continuous rated power at lowest impedance.

NEW

Rated Power

Continuous power @ 4Ω

111 GRAMS

WATTS

150-1000

AVERAGE EFFICIENCY

69.3 %

Frequency Response

THD+N@ Rated Power

Input Sensitivity

S/N Ratio

Channel Separation

Dimensions

R150-2

50x2 @ 4 OHMS 75x2 @ 2 OHMS 150x1 @ 4 OHMS BRIDGED

20Hz-20kHz

<0.1%

150MV - 8V

>90dB

>50dB

H 2.40” x W 7.70” x L 11.50”

R300-4

50x4 @ 4 OHMS 75x4 @ 2 OHMS 150x2 @ 4 OHMS BRIDGED

20Hz-20kHz

<0.1%

150MV - 8V

>90dB

>50dB

H 2.40” x W 7.70” x L 17.10”

R600-5

50x4 + 200x1 @ 4 OHMS 75x4 + 300x1 @ 2 OHMS 150x2 + N/A @ 4 OHMS BRIDGED

20Hz-20kHz

<0.1%

150MV - 8V

>90dB

>50dB

H 2.40” x W 7.70” x L 17.10”

R250-1

150x1 @ 4 OHMS 250x1 @ 2 OHMS

20Hz-250kHz

<0.1%

150MV - 8V

>100dB

N/A

H 2.40” x W 7.70” x L 11.50”

R500-1

320x1 @ 4 OHMS 500x1 @ 2 OHMS

20Hz-250kHz

<0.1%

150MV - 8V

>100dB

N/A

H 2.40” x W 7.70” x L 16.70”

500x1 @ 4 OHMS 1000x1 @ 2 OHMS

20Hz-250kHz

<0.1%

150MV - 8V

>100dB

N/A

H 2.40” x W 7.70” x L 11.50”

R1000-1D

PRIME FRD AMPLIFIERS

R600-4D

CLASS D / FULL RANGE CLASS D High efficiency amplifier design that reduces current consumption from the charging system.

31 2011 BUYERS GUIDE

With a small chassis, lower power consumption, and easy to use set-up controls, Prime Full Range Class D amplifers are designed with both the first time buyer and do-it-yourself installer in mind.

NEW

ON-BOARD PUNCH EQ NOTE: Mono amplifiers feature remote Punch EQ (R750-1D & R1200-1D)

R600-4D

Differential RCA Inputs

4 AWG Set-Screw Connectors

THERMAL MASS PER INCH RMS POWER RANGE

Continuous rated power at lowest impedance.

Rated Power

Continuous power @ 4Ω

137 GRAMS

WATTS

400-1200

AVERAGE EFFICIENCY

85.1 %

Frequency Response

THD+N@ Rated Power

Input Sensitivity

S/N Ratio

Channel Separation

Dimensions

R400-4D

75x4 @ 4 OHMS 100x4 @ 2 OHMS 200x2 @ 4 OHMS BRIDGED

20HZ - 20khZ

<0.1%

150MV - 5V

>90dB

>50dB

H 2.00” x W 6.80” x L 9.10”

R600-4D

100x4 @ 4 OHMS 150x4 @ 2 OHMS 300x2 @ 4 OHMS BRIDGED

20HZ - 20khZ

<0.1%

150MV - 5V

>90dB

>50dB

H 2.00” x W 6.80” x L 11.10”

R750-1D

250x1 @ 4 OHMS 500x1 @ 2 OHMS 750x1 @ 1 OHMS

20HZ - 250khZ

<0.8%

150MV - 5V

>100dB

N/A

H 2.00” x W 6.80” x L 9.10”

R1200-1D

400x1 @ 4 OHMS 800x1 @ 2 OHMS 1200x1 @ 1 OHMS

20HZ - 250khZ

<0.8%

150MV - 5V

>100dB

N/A

H 2.00” x W 6.80” x L 11.10”

PUSH THE ENVELOPE

We’ve raised the bar, again. If you’re looking to rattle windows and set off car alarms in the next town over, POWER subwoofers thump bass PERIOD.

THE STANDARD

With 26 different models PUNCH subs offer huge bass and the right installation for any system. Don’t just reach your system’s potential.

PUNCH it.

THROW DOWN

Subs that are ready to ROCK and throw down the lows without emptying your wallet, PRIME woofers are the perfect first step into performance audio.

SUBWOOFERS Proprietary Rockford Technology When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has lead us to develop proprietary amplifier topologies and speaker/amplifier technologies that put a spin on the normal and make it Rockford.

Vertical Attach Surround Technique U.S. Patent (Patent Pending)

Rockfordâ&#x20AC;&#x2122;s proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing) which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved.

flex fit The slot mounted frame pattern of the Flex Fit basket utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted.

35 2011 BUYERS GUIDE SUBWOOFER TECHNOLOGIES

Selectable Woofer Impedance Fused Termination Removing and inverting the center plug allows nominal impedance of voice coils to quickly be configured in a Series or Parallel wiring configuration. This removable impedance selection jumper also provides fused protection in severe overload conditions.

Inductive Damping Heat Sink Secures directly to the top of magnet structure to improve system efficiency by reducing both distortion and back EMF (Electo-magnetic force). Also radiates heat to reduce voice coil temperature.

CEA-2031 Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous demand, not instantaneous power handling that over time, can damage voice coils.

rockfordfosgate.com Donâ&#x20AC;&#x2122;t forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Woofer Box Advisor for optimized enclosure bass performance.

POWER T2 SUBWOOFERS

T2D212

The T2 is perfectly matched to Rockford’s Power Series amplifiers. Built like a tank, on a precision cast aluminum alloy basket with Rockford’s proprietary IDHSTM cooling technique. Choose T2 and roll over the competition.

37 2011 BUYERS GUIDE

SURROUND Tall Profile, Santoprene™ w/ VAST™

CONE/DUSTCAP MATERIAL

Tall Profile, Santoprene™

Hard Anodized Aluminum

Half-Roll, Nitrile Butadiene Rubber

Kevlar Fiber Paper/ Hard Anodized Aluminum

Half-Roll, Sealed Polyether-ester Foam

Kevlar Fiber Paper/ Acrylonitrile Butadiene Styrene Blend Kevlar Fiber Paper Polypropylene

SPIDER Dual Mirror Imaged w/Stitched Lead Wire and Cooling Vents Single w/ Stitched Lead Wire and Cooling Vents Single Spider

FRAME STRUCTURE Die-Cast Aluminum w/ FlexFitTM Die-Cast Aluminum

VOICE COIL

StampCastTM w/ FlexFitTM

4” 4-Layer High Temp. Aluminum w/ NomexTM collar

Stamped Steel

3” 4-Layer High Temp. Aluminum w/ NomexTM collar

MOTOR STRUCTURE

2.50” 4-Layer High Temp. Aluminum w/ NomexTM collar

Triple Stack Ferrite Magnet w/ IDHSTM

2.25” 4-Layer High Temp. Aluminum w/ NomexTM collar

Double Stack Ferrite Magnet w/ IDHSTM

2” 4-Layer High Temp. Aluminum w/ NomexTM collar

Double Stack Ferrite Magnet Single Ferrite Magnet

Variations in the anatomy of a loudspeaker dramatically changes their performance characteristics. An increase in voicecoil size coupled with a stronger cone material yields a higher power handling and increased output. By combing quality materials with Rockford proprietary speaker technologies in our subwoofer lineup we are sure to meet your system demands.

PEAK POWER

SPL 148 dB

SPL numbers reflect an in-car response, utilizing dual T2 12” subwoofers in a typical sedan size cabin at peak power.

X-MAX LINEAR EXCURSION

RMS Power Handling

Peak Power Handling

Nominal Impedance

Sealed Enclosure

Ported Enclosure

Sensitivity

Mounting Depth

T2D212/T2D412

1200 WATTS

2400 WATTS

DUAL 2Ω or 4Ω

N/A

2.00 CU. FT. PORT: (3) 3”x12”

85dB

9.00”

T2D215/ T2D415

1200 WATTS

2400 WATTS

DUAL 2Ω or 4Ω

N/A

2.75 CU. FT. PORT: (3) 6”x17”

87dB

10.00”

POWER T1 SUBWOOFERS

Integrated/Removable Grille INCLUDED

T1D215

Power Series T1 subwoofers are built with the Rockford Fosgate technologies first seen in our all new full range line. These bad boys have patented VAST technology that increases surface cone area up to 25% so the T1 performs like a much larger woofer. Flex Fit not only looks the part but gives extreme flexibility for extreme installations. Clean, high tech and ready to set off car alarms.

39 2011 BUYERS GUIDE

CONE/DUSTCAP MATERIAL

SURROUND

Hard Anodized Aluminum

Tall Profile, Santoprene™ w/ VAST™

Kevlar Fiber Paper/ Hard Anodized Aluminum

Tall Profile, Santoprene™

Kevlar Fiber Paper/ Acrylonitrile Butadiene Styrene Blend

Half-Roll, Nitrile Butadiene Rubber

Kevlar Fiber Paper

Half-Roll, Sealed Polyether-ester Foam

Polypropylene

SPIDER Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents Single w/ Stitched Lead Wire and Cooling Vents

FRAME STRUCTURE

Single Spider

Die-Cast Aluminum w/ FlexFitTM Die-Cast Aluminum StampCastTM w/ FlexFitTM

VOICE COIL

Stamped Steel

4” 4-Layer High Temp. Aluminum w/ NomexTM collar 3” 4-Layer High Temp. Aluminum w/ NomexTM collar

MOTOR STRUCTURE

2.50” 4-Layer High Temp. Aluminum w/ Nomex collar

Triple Stack Ferrite Magnet w/ IDHSTM

2.25” 4-Layer High Temp. Aluminum w/ NomexTM collar

Double Stack Ferrite Magnet w/ IDHSTM

2” 4-Layer High Temp. Aluminum w/ NomexTM collar

Double Stack Ferrite Magnet

TM

Single Ferrite Magnet Variations in the anatomy of a loudspeaker dramatically changes their performance characteristics. An increase in voicecoil size coupled with a stronger cone material yields a higher power handling and increased output. By combing quality materials with Rockford proprietary speaker technologies in our subwoofer lineup we are sure to meet your system demands.

PEAK POWER

SPL 144 dB

NEW

SPL numbers reflect an in-car response, utilizing dual T1 12” subwoofers in a typical sedan size cabin at peak power.

X-MAX LINEAR EXCURSION

RMS Power Handling

Peak Power Handling

Nominal Impedance

Sealed Enclosure

Ported Enclosure

Sensitivity

Mounting Depth

T1D210/T1D410

600 WATTS

1200 WATTS

DUAL 2Ω or 4Ω

0.75 CU. FT.

1.50 CU. FT. PORT: (1) 4”x11”

83dB

6.50”

T1D212/T1D412

800 WATTS

1600 WATTS

DUAL 2Ω or 4Ω

1.25 CU. FT.

1.75 CU. FT. PORT: (1) 4”x9”

86dB

6.90”

T1D215/T1D415

1000 WATTS

2000 WATTS

DUAL 2Ω or 4Ω

2.25 CU. FT.

2.66 CU. FT. PORT: (1) 4”x10”

88dB

8.40”

POWER T0 SUBWOOFERS

Integrated/Removable Grille INCLUDED T0D412

Designed for the customer that demands more than P3 performance but doesnâ&#x20AC;&#x2122;t quite have the power for the T1, the new T0 line of subwoofers handle more power and have more cone area (VAST).

41 2011 BUYERS GUIDE

NEW CONE/DUSTCAP MATERIAL

SURROUND

Hard Anodized Aluminum

Tall Profile, Santoprene™ w/ VAST™

Kevlar Fiber Paper/ Hard Anodized Aluminum

Tall Profile, Santoprene™

Kevlar Fiber Paper/ Acrylonitrile Butadiene Styrene Blend

Half-Roll, Nitrile Butadiene Rubber

Kevlar Fiber Paper

Half-Roll, Sealed Polyether-ester Foam

Polypropylene

SPIDER Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents

FRAME STRUCTURE

Single w/ Stitched Lead Wire and Cooling Vents

Die-Cast Aluminum

Die-Cast Aluminum w/ FlexFitTM StampCastTM w/ FlexFitTM

Single Spider

Stamped Steel

VOICE COIL

MOTOR STRUCTURE

4” 4-Layer High Temp. Aluminum w/ NomexTM collar

Triple Stack Ferrite Magnet w/ IDHSTM

3” 4-Layer High Temp. Aluminum w/ NomexTM collar

Double Stack Ferrite Magnet w/ IDHSTM

2.50” 4-Layer High Temp. Aluminum w/ NomexTM collar

Double Stack Ferrite Magnet

2.25” 4-Layer High Temp. Aluminum w/ NomexTM collar

Single Ferrite Magnet

2” 4-Layer High Temp. Aluminum w/ NomexTM collar

Variations in the anatomy of a loudspeaker dramatically changes their performance characteristics. An increase in voicecoil size coupled with a stronger cone material yields a higher power handling and increased output. By combing quality materials with Rockford proprietary speaker technologies in our subwoofer lineup we are sure to meet your system demands.

PEAK POWER

SPL 140 dB

SPL numbers reflect an in-car response, utilizing dual T0 12” subwoofers in a typical sedan size cabin at peak power.

X-MAX LINEAR EXCURSION

RMS Power Handling

Peak Power Handling

Nominal Impedance

Sealed Enclosure

Ported Enclosure

Sensitivity

Mounting Depth

T0D210/T0D410

550 WATTS

1100 WATTS

DUAL 2Ω or 4Ω

0.75 CU. FT.

1.50 CU. FT. PORT: (1) 4”x11”

81dB

6.50”

T0D212/T0D412

700 WATTS

1400 WATTS

DUAL 2Ω or 4Ω

1.25 CU. FT.

1.75 CU. FT. PORT: (1) 4”x9”

84dB

6.90”

T0D215/T0D415

800 WATTS

1600 WATTS

DUAL 2Ω or 4Ω

2.25 CU. FT.

2.66 CU. FT. PORT: (1) 4”x10”

87dB

8.40”

PUNCH P3 SUBWOOFERS

Optional Integrated Grille

The first improvement you will notice on the new P3 subwoofers is that VAST increases the area of the anodized aluminum cone. We also added a StampCast basket with Flex Fit and increased the power handling to the already robust motor structure.

43 2011 BUYERS GUIDE

P3D4-12

NEW CONE/DUSTCAP MATERIAL

SURROUND

Hard Anodized Aluminum

Tall Profile, Santoprene™ w/ VAST™

Kevlar Fiber Paper/ Hard Anodized Aluminum

Tall Profile, Santoprene™

Kevlar Fiber Paper/ Acrylonitrile Butadiene Styrene Blend

Half-Roll, Nitrile Butadiene Rubber

Kevlar Fiber Paper

Half-Roll, Sealed Polyether-ester Foam

Polypropylene

SPIDER Dual Mirror Imaged w/Stitched Lead Wire and Cooling Vents Single w/ Stitched Lead Wire and Cooling Vents

FRAME STRUCTURE

Single Spider

Die-Cast Aluminum w/ FlexFitTM Die-Cast Aluminum StampCastTM w/ FlexFitTM Stamped Steel

VOICE COIL 4” 4-Layer High Temp. Aluminum w/ NomexTM collar 3” 4-Layer High Temp. Aluminum w/ NomexTM collar

MOTOR STRUCTURE

2.50” 4-Layer High Temp. Aluminum w/ NomexTM collar

Triple Stack Ferrite Magnet w/ IDHSTM

2.25” 4-Layer High Temp. Aluminum w/ NomexTM collar

Double Stack Ferrite Magnet w/ IDHSTM

2” 4-Layer High Temp. Aluminum w/ NomexTM collar

Double Stack Ferrite Magnet Single Ferrite Magnet

Variations in the anatomy of a loudspeaker dramatically changes their performance characteristics. An increase in voicecoil size coupled with a stronger cone material yields a higher power handling and increased output. By combing quality materials with Rockford proprietary speaker technologies in our subwoofer lineup we are sure to meet your system demands.

PEAK POWER

SPL 137 dB

SPL numbers reflect an in-car response, utilizing dual P3 12” subwoofers in a typical sedan size cabin at peak power.

X-MAX LINEAR EXCURSION

RMS Power Handling

Peak Power Handling

Nominal Impedance

Sealed Enclosure

Ported Enclosure

Sensitivity

Mounting Depth

P3D2-10/P3D4-10

500 WATTS

1000 WATTS

DUAL 2Ω or 4Ω

0.59 CU. FT.

1.40 CU. FT. PORT: (1) 4”x14”

82dB

6.20”

P3D2-12/P3D4-12

600 WATTS

1200 WATTS

DUAL 2Ω or 4Ω

1.02 CU. FT.

1.79 CU. FT. PORT: (1) 4”x10”

85dB

6.70”

P3D2-15/P3D4-15

600 WATTS

1200 WATTS

DUAL 2Ω or 4Ω

1.58 CU. FT.

2.66 CU. FT. PORT: (1) 4”x10”

86dB

7.60”

PUNCH P2 SUBWOOFERS

Optional Integrated Grille

P2D4-12

Like the new P3, VAST is utilized for increased cone area and features a StampCast basket with Flex Fit. The new P2 subwoofers have a 38% increase in power handling.

We incorporated a Kevlar fiber reinforced cone to keep P2 at a high performance, yet affordable price point.

45 2011 BUYERS GUIDE

NEW CONE/DUSTCAP MATERIAL

SURROUND

Hard Anodized Aluminum

Tall Profile, Santoprene™ w/ VAST™

Kevlar Fiber Paper/ Hard Anodized Aluminum

Tall Profile, Santoprene™

Kevlar Fiber Paper/ Acrylonitrile Butadiene Styrene Blend

Half-Roll, Nitrile Butadiene Rubber

Kevlar Fiber Paper

Half-Roll, Sealed Polyether-ester Foam

Polypropylene

SPIDER Dual Mirror Imaged w/Stitched Lead Wire and Cooling Vents Single w/ Stitched Lead Wire and Cooling Vents

FRAME STRUCTURE

Single Spider

Die-Cast Aluminum w/ FlexFitTM Die-Cast Aluminum StampCastTM w/ FlexFitTM Stamped Steel

VOICE COIL 4” 4-Layer High Temp. Aluminum w/ NomexTM collar 3” 4-Layer High Temp. Aluminum w/ NomexTM collar

MOTOR STRUCTURE

2.50” 4-Layer High Temp. Aluminum w/ NomexTM collar

Triple Stack Ferrite Magnet w/ IDHSTM

2.25” 4-Layer High Temp. Aluminum w/ NomexTM collar

Double Stack Ferrite Magnet w/ IDHSTM

2” 4-Layer High Temp. Aluminum w/ NomexTM collar

Double Stack Ferrite Magnet Single Ferrite Magnet

Variations in the anatomy of a loudspeaker dramatically changes their performance characteristics. An increase in voicecoil size coupled with a stronger cone material yields a higher power handling and increased output. By combing quality materials with Rockford proprietary speaker technologies in our subwoofer lineup we are sure to meet your system demands.

PEAK POWER

SPL 135 dB

SPL numbers reflect an in-car response, utilizing dual P2 12” subwoofers in a typical sedan size cabin at peak power.

X-MAX LINEAR EXCURSION

RMS Power Handling

Peak Power Handling

Nominal Impedance

Sealed Enclosure

Ported Enclosure

Sensitivity

Mounting Depth

P2D2-8/P2D4-8

250 WATTS

500 WATTS

DUAL 2Ω or 4Ω

0.23 CU. FT.

0.65 CU. FT. PORT: (1) 2”x8”

83dB

4.80”

P2D2-10/P2D4-10

300 WATTS

600 WATTS

DUAL 2Ω or 4Ω

0.59 CU. FT.

1.40 CU. FT. PORT: (1) 4”x14”

84dB

5.90”

P2D2-12/P2D4-12

400 WATTS

800 WATTS

DUAL 2Ω or 4Ω

1.02 CU. FT.

1.79 CU. FT. PORT: (1) 4”x10”

86dB

6.40”

P2D2-15/P2D4-15

400 WATTS

800 WATTS

DUAL 2Ω or 4Ω

1.58 CU. FT.

2.66 CU. FT. PORT: (1) 4”x10”

86dB

7.30”

PUNCH P1 SUBWOOFERS

Optional Integrated Grille P1S4-12

The new P1 features a Kevlar fiber reinforced cone, StampCast basket with Flex Fit and increased power handling over its predecessor. All this added to the already reliable performance.

47 2011 BUYERS GUIDE

NEW

SURROUND Tall Profile, Santoprene™ w/ VAST™

CONE/DUSTCAP MATERIAL

Tall Profile, Santoprene™

Hard Anodized Aluminum

Half-Roll, Nitrile Butadiene Rubber

Kevlar Fiber Paper/ Hard Anodized Aluminum

Half-Roll, Sealed Polyether-ester Foam

Kevlar Fiber Paper/ Acrylonitrile Butadiene Styrene Blend Kevlar Fiber Paper Polypropylene

SPIDER Dual Mirror Imaged w/Stitched Lead Wire and Cooling Vents

FRAME STRUCTURE

Single w/ Stitched Lead Wire and Cooling Vents

Die-Cast Aluminum

Die-Cast Aluminum w/ FlexFitTM StampCastTM w/ FlexFitTM

Single Spider

Stamped Steel

VOICE COIL 4” 4-Layer High Temp. Aluminum w/ NomexTM collar

MOTOR STRUCTURE

3” 4-Layer High Temp. Aluminum w/ NomexTM collar

Triple Stack Ferrite Magnet w/ IDHSTM

2.50” 4-Layer High Temp. Aluminum w/ Nomex collar

Double Stack Ferrite Magnet w/ IDHSTM

2.25” 4-Layer High Temp. Aluminum w/ Nomex collar

Double Stack Ferrite Magnet

2” 4-Layer High Temp. Aluminum w/ Nomex collar

Single Ferrite Magnet

TM TM

TM

Variations in the anatomy of a loudspeaker dramatically changes their performance characteristics. An increase in voicecoil size coupled with a stronger cone material yields a higher power handling and increased output. By combing quality materials with Rockford proprietary speaker technologies in our subwoofer lineup we are sure to meet your system demands.

PEAK POWER

SPL 133 dB

SPL numbers reflect an in-car response, utilizing dual P1 12” subwoofers in a typical sedan size cabin at peak power.

X-MAX LINEAR EXCURSION

RMS Power Handling

Peak Power Handling

Nominal Impedance

Sealed Enclosure

Ported Enclosure

Sensitivity

Mounting Depth

P1S2-8/P1S4-8

200 WATTS

400 WATTS

SINGLE 4Ω or 8Ω

0.23 CU. FT.

0.65 CU. FT. PORT: (1) 2”x6”

83.5dB

4.40”

P1S2-10/P1S4-10

250 WATTS

500 WATTS

SINGLE 4Ω or 8Ω

0.59 CU. FT.

1.40 CU. FT. PORT: (1) 3”x8”

85dB

5.30”

P1S2-12/P1S4-12

250 WATTS

500 WATTS

SINGLE 4Ω or 8Ω

1.02 CU. FT.

1.79 CU. FT. PORT: (1) 3”x6”

86dB

6.00”

P1S2-15/P1S4-15

250 WATTS

500 WATTS

SINGLE 4Ω or 8Ω

1.58 CU. FT.

2.66 CU. FT. PORT: (1) 4”x8”

87.5dB

7.00”

PUNCH P3 SHALLOW SUBWOOFERS

P3SD4-12

3.6”

Optional Grille

The Rockford P3 Shallow Mount subwoofers deliver the Punch - even in depth limited mounting situations.

All vehicles are not the same: some can accommodate deep subwoofers and some can’t. In the past that meant no Bass. Not anymore! Now even depth challenged vehicles can have REAL Bass.

49 2011 BUYERS GUIDE

CONE/DUSTCAP MATERIAL

SURROUND

Hard Anodized Aluminum

Tall Profile, Santoprene™ w/ VAST™

Kevlar Fiber Paper/ Hard Anodized Aluminum

Tall Profile, Santoprene™

Kevlar Fiber Paper/ Acrylonitrile Butadiene Styrene Blend

Half-Roll, Nitrile Butadiene Rubber

Kevlar Fiber Paper

Half-Roll, Sealed Polyether-ester Foam

Polypropylene

SPIDER

FRAME STRUCTURE

Dual Mirror Imaged w/Stitched Lead Wire and Cooling Vents

Die-Cast Aluminum w/ FlexFitTM

Single w/ Stitched Lead Wire and Cooling Vents

Die-Cast Aluminum StampCastTM w/ FlexFitTM

Single Spider

Stamped Steel

VOICE COIL

MOTOR STRUCTURE

4” 4-Layer High Temp. Aluminum w/ NomexTM collar

Triple Stack Ferrite Magnet w/ IDHSTM

3” 4-Layer High Temp. Aluminum w/ NomexTM collar

Double Stack Ferrite Magnet w/ IDHSTM

2.50” 4-Layer High Temp. Aluminum w/ NomexTM collar

Double Stack Ferrite Magnet

2.25” 4-Layer High Temp. Aluminum w/ NomexTM collar

Single Ferrite Magnet

2” 4-Layer High Temp. Aluminum w/ NomexTM collar

Variations in the anatomy of a loudspeaker dramatically changes their performance characteristics. An increase in voicecoil size coupled with a stronger cone material yields a higher power handling and increased output. By combing quality materials with Rockford proprietary speaker technologies in our subwoofer lineup we are sure to meet your system demands.

PEAK POWER

SPL 133 dB

SPL numbers reflect an in-car response, utilizing dual P3S 12” subwoofers in a typical sedan size cabin at peak power.

X-MAX LINEAR EXCURSION

RMS Power Handling

Peak Power Handling

Nominal Impedance

Sealed Enclosure

Ported Enclosure

Sensitivity

Mounting Depth

P3SD2-10/P3SD4-10

300 WATTS

600 WATTS

DUAL 2Ω or 4Ω

0.50 CU. FT.

0.75 CU. FT. PORT: (1) 3”x12”

83dB

3.50”

P3SD2-12/P3SD4-12

400 WATTS

800 WATTS

DUAL 2Ω or 4Ω

1.00 CU. FT.

1.25 CU. FT. PORT: (1) 4”x14”

86dB

3.60”

PUNCH LOADED

P1-1X12

Punch Loaded enclosures are the quick and easy to install bass solution to upgrade your factory or aftermarket stereo system.

• LEAP (Loudspeaker Enclosure Analysis Program) is utilized to determine the optimum port tuning for each subwoofer/enclosure model • High-Flow, Low-Noise Port Design • Constructed with 5/8” MDF • 10 AWG Input Terminals • Lowest wired impedance (P3 & P2 at 1Ω, P1 at 4 & 2 Ω) Optional Integrated Grille

51 2011 BUYERS GUIDE

P2-2X12

P3L-S12

Enclosures AVAILABLE For all 10”or 12” Punch Subwoofers P3-1X10 P3-2X10

P3-1X12 P3-2X12

P2-1X10 P2-2X10

P2-1X12 P2-2X12

P1-1X10 P1-2X10

P1-1X12 P1-2X12

P3L-S10

P3L-S12

NEW

PRIME R2 SUBWOOFERS

Half-Roll Sealed PolyeTHEReSTER Foam SURROUND

POLYPROPYLENE CONE

STAMPED STEEL FRAME STRUCTURE

R2D4-12

Optimized for sealed and vented enclosures, the new R2 subwoofers are the perfect match to Prime amplifiers.

PEAK POWER

SPL 132 dB

SPL numbers reflect an in-car response, utilizing dual R2 12” subwoofers in a typical sedan size cabin at peak power.

X-MAX LINEAR EXCURSION

RMS Power Handling

Peak Power Handling

R2D2-10/R2D4-10

250 WATTS

500 WATTS

DUAL 2Ω or 4Ω

0.59 CU. FT.

R2D2-12/R2D4-12

250 WATTS

500 WATTS

DUAL 2Ω or 4Ω

1.02 CU. FT.

53 2011 BUYERS GUIDE

Nominal Impedance

Sealed Enclosure

Ported Enclosure

Sensitivity

Mounting Depth

1.40 CU. FT. PORT: (1) 4”x13”

89dB

4.30”

1.79 CU. FT. PORT: (1) 4”x9.3”

87dB

5.10”

NEW

PRIME SHALLOW SUBWOOFERS 3.6” Half-Roll Sealed PolyeTHER-eSTER Foam SURROUND

SHALLOW

INJECTED MOLDED POLYPROPYLENE CONE

R2SD412

STAMPED STEEL FRAME STRUCTURE

When you need a shallow subwoofer at a value price, the R2 Shallow is the solution.

PEAK POWER

SPL 130 dB

SPL numbers reflect an in-car response, utilizing dual R2S 12” subwoofers in a typical sedan size cabin at peak power.

X-MAX LINEAR EXCURSION

RMS Power Handling

Peak Power Handling

Nominal Impedance

Sealed Enclosure

Ported Enclosure

Sensitivity

Mounting Depth

R2SD2-10/R2SD4-10

200 WATTS

400 WATTS

DUAL 2Ω or 4Ω

0.70 CU. FT.

1.40 CU. FT. PORT: (1) 4”x13.70”

83dB

3.40”

R2SD2-12/R2SD4-12

250 WATTS

500 WATTS

DUAL 2Ω or 4Ω

0.90 CU. FT.

1.79 CU. FT. PORT: (1) 4”x11.80”

85dB

3.60”

PRIME R1 SUBWOOFERS/ENCLOSURES Half-Roll NITRILE BUTADIENE RUBBRER SURROUND POLYPROPYLENE CONE

R1S412

STAMPED STEEL FRAME STRUCTURE

R1L-1X12 R1L-2X12

Rockford Fosgate PRIME subwoofers are the perfect first step into performance audio. These purebred Rockford woofers offer a value the competition just can’t match. When you combine the 2” voice coils and 150 watt power handling with a Prime amplifier, this system will always get it done. You’ve always wanted a Rockford system, now you can.

PEAK POWER

SPL 129 dB

SPL numbers reflect an in-car response, utilizing dual R1 12” subwoofers in a typical sedan size cabin at peak power.

X-MAX LINEAR EXCURSION

RMS Power Handling

Peak Power Handling

Nominal Impedance

Sealed Enclosure

Ported Enclosure

Sensitivity

Mounting Depth

R1S410

150 WATTS

300 WATTS

SINGLE 4Ω

0.75 CU. FT.

N/A

86dB

4.60”

R1S412

150 WATTS

300 WATTS

SINGLE 4Ω

1.02 CU. FT.

N/A

87dB

5.00”

55 2011 BUYERS GUIDE

PRIME POWERED ENCLOSURES

R300-12

High Level/RCA Input w/ Auto Turn On Front Mounted Controls

The All-New PRIME POWERED LOADED bass solution mixes it up with leading edge Rockford Fosgate technology in a small affordable package. Armed with a 300 watt class D amplifier and either a 10” or 12” proprietary subwoofer, the PRIME POWERED LOADED is a perfect add to your trunk, cargo area or behind your rear seat.

• Prime Loaded available in single and dual 10” or 12” • Prime Powered Loaded available in single 10” or 12”

PUSH THE ENVELOPE

Once you hear them you’ll know.

Power loudspeakers will transform your ride into a sonic experience so accurate and clear you might not want to get out of your car.

THE STANDARD

Don’t just listen to your music, feel it. Packed with features, just like its older brother POWER, PUNCH loudspeakers are for those who like it raw and loud.

THROW DOWN

PRIME loudspeakers are a perfect factory replacement for any vehicle. Rockford DNA throughout, PRIME loudspeakers get it done.

SPEAKERS Proprietary Rockford Technology When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has lead us to develop proprietary amplifier topologies and speaker/amplifier technologies that put a spin on the normal and make it Rockford.

Vertical Attach Surround Technique U.S. Patent (Patent Pending)

Rockfordâ&#x20AC;&#x2122;s proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing) which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved.

flex fit The slot mounted frame pattern of the Flex Fit basket utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted.

RF link Rockfordâ&#x20AC;&#x2122;s proprietary RF Link is a bus-power component connection system enabling integration and control of all RF Link equipped products. The use of this systems allows for the expansion of auxiliary controls and managed system turn on.

59 2011 BUYERS GUIDE SPEAKER TECHNOLOGIES

Discreet Dual Clamp Rockfordâ&#x20AC;&#x2122;s proprietary tweeter mounting design provides concentric clamping pressure around the perimeter of the mounting hole, utilizing a single center screw. This applies balanced pressure to both faces of the mounting surface. From there, the tweeter simply snaps into place and is finished with a snap on trim ring.

Inductive Damping Heat Sink Secures directly to the top of magnet structure to improve system efficiency by reducing both distortion and back EMF (Electo-magnetic force). Also radiates heat to reduce voice coil temperature.

Integrated Concealed Crossover The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier installation.

CEA-2031 Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous damand, not instantaneous power handling, that over time, can damage voice coils.

Panel

POWER T5 SPEAKERS

T5652-S

Building on years of knowledge in acoustic engineering Rockford Fosgate has delivered the new T5 Series components.

Industry leading in every way these speakers feature; Liquid Crystal Polymer cones (LCP) for superior sound quality, solid copper phase plugs, neodymium motors and die cast aluminum frames. The T5 systems biggest benefit is derived from the increase in cone area with Rockford’s patent pending VAST (Vertical Attach Surround Technique) surround technology. The crossover is a unique dual mono configuration that conveniently lets adjustments be made from the driver’s seat. Available in a 6.5” two-way component system these audiophile speakers offer ultra high fidelity listening for all applications.

Remote Tuning Module

61 2011 BUYERS GUIDE

NEW Liquid Crystal Polymer FIBER™ TWEETER DOME TWEETER

COPPER PHASE PLUG TUNING CHAMBER CAST ALUMINUM TRIM BEZEL w/DDC™

MACHINED COPPER PHASE PLUG

Tri-laminate WOVEN Liquid Crystal Polymer FIBER™ Cone w/ VAST™

MID-RANGE

DIE-CAST ALUMINUM W/ FLEX FIT™ 3-WAY CONNECTION TERMINAL DUAL FOCUSED FIELD MAGNET STRUCTURE

NEODYMIUM MOTOR W/ IDHS™

18 dB HP/12 or 6 dB LP PER OCTAVE CROSSOVER

MOSFET CASED Resistors

REMOTE Tuning Module

Air-Core Inductors

Foil wound Multi-Tap Inductors

Mil-Spec Capacitors

RF LinK

T5652-S

Speaker Size

Tweeter Size

RMS Power Handling

Peak Power Handling

Frequency Response

Mounting Depth

6.5”

1”

150 WATTS

300 WATTS

45Hz-40kHz

2.48”

POWER T3 SPEAKERS

T3652-S

When Rockford Fosgate set out to design the T3 component we had 2 goals in mind â&#x20AC;&#x201C; Outstanding audio performance and high power handling. The combination of an ultra strong die cast basket and the LCPF Cone results in a very high strength driver that is resistant to temperature changes and exhibits outstanding tonal accuracy because the LCPF has excellent damping characteristics to resist vibration. In order to achieve greater power handling, better efficiency, and to avoid distortion the crossover network is built with Air-Core Inductors and 5% tolerance capacitors. Finally, the T3 can be installed easily in most vehicles because of the flex-fit basket, the on/off axis switch, and the flexible tweeter attenuation. Audition this component set and youâ&#x20AC;&#x2122;ll hear that the T3 more than exceeds expectations.

63 2011 BUYERS GUIDE

NEW

TWEETER

Liquid Crystal Polymer FIBER™ DOME

BRUSHED/POLISHED ALUMINUM TRIM BEZEL w/DDC™

WOVEN Liquid Crystal Polymer FIBER™ Cone W/ VAST™

DIE-CAST ALUMINUM W/ FLEX FIT™ MID-RANGE

3-WAY CONNECTION TERMINAL

NEODYMIUM MOTOR W/ IDHS™

5% TOLERANCE Capacitors 18 dB HP/12 dB LP PER OCTAVE CROSSOVER

Air-Core Inductors BI-AMP CAPABLE

TWEETER ATTENUATION (+2dB, 0dB, -2dB)

T3652-S

ON/OFF AXIS SWITCH

Speaker Size

Tweeter Size

RMS Power Handling

Peak Power Handling

Frequency Response

Mounting Depth

6.5”

1”

125 WATTS

250 WATTS

48Hz-24kHz

2.48”

POWER T2 SPEAKERS

T2652-S

POWER loudspeakers will transform your ride into a sonic experience so accurate and clear you might not want to get out of your car. From our billet machined aluminum phase plug, to our audiophile grade component crossover, POWER loudspeakersâ&#x20AC;&#x2122; superior performance compliments the audiophile in all of us. Factor in patented VAST technology that increases cone area and youâ&#x20AC;&#x2122;ve got the ability to out perform others with so called same size speakers.

65 2011 BUYERS GUIDE

TWEETER

ALUMINUM DOME

POLISHED/BRUSHED ALUMINUM TRIM BEZEL w/DDC™

MACHINED ALUMINUM PHASE PLUG INJECTION MOLDED POLYPROPYLENECARBON FIBER BLEND CONE W/ VAST™

MID-RANGE

UNIFIED TAB

STAMPCAST™ W/ FLEX FIT™

FERRITE MOTOR STRUCTURE 5% TOLERANCE Capacitors 18 dB HP/12 dB LP PER OCTAVE CROSSOVER

Air-Core Inductors BI-AMP CAPABLE

TWEETER ATTENUATION (+2dB, 0dB, -2dB)

ON/OFF AXIS SWITCH

Speaker Size

Tweeter Size

RMS Power Handling

Peak Power Handling

Frequency Response

Mounting Depth

T252-S

5.25”

1”

75 WATTS

150 WATTS

65Hz-22kHz

1.97”

T2652-S

6.5”

1”

100 WATTS

200 WATTS

50Hz-22kHz

2.48”

T2T-S

N/A

1”

100 WATTS

200 WATTS

3kHz-22kHz

*0.91” *Flush Mount

POWER T1 SPEAKERS

T1692-S

Whether youâ&#x20AC;&#x2122;re looking for a coaxial solution or a true component system, POWER series T1 has a speaker for you. T1 speakers feature patented VAST technology that increases cone area for improved output.

The cantilever mounted tweeter on the coaxial improve sound quality and the Flex Fit basket on both coaxial and components make the installation seamless. Factor in the poly-carbon blend cone and the POWER series T1 speakers deliver an audiophile performance in your vehicle.

67 2011 BUYERS GUIDE

T1652

TWEETER

TREATED FABRIC DOME NOTE: The coaxial speaker line features an aluminum dome tweeter

BRUSHED/POLISHED ALUMINUM TRIM BEZEL W/DDC™

MID-RANGE

STAMPCAST™ W/ FLEX FIT™ INJECTION MOLDED POLYPROPYLENECARBON FIBER BLEND CONE W/ VAST™

UNIFIED TAB

FERRITE MOTOR STRUCTURE 18 dB HP/12 dB LP PER OCTAVE CROSSOVER

Air-Core Inductors

5% TOLERANCE Capacitors

BI-AMP CAPABLE TWEETER ATTENUATION (+2dB, 0dB, -2dB)

ON/OFF AXIS SWITCH

NOTE: The coaxial speaker line features an Integrated Concealed Crossover (ICC)

Speaker Size

Tweeter Size

RMS Power Handling

Peak Power Handling

Frequency Response

Mounting Depth

T152-S

5.25”

1”

75 WATTS

150 WATTS

70Hz-22kHz

1.97”

T1652-S

6.5”

1”

100 WATTS

200 WATTS

50Hz-22kHz

2.48”

T1T-S

N/A

1”

100 WATTS

200 WATTS

3kHz-22kHz

*0.91”

T142

4”

0.75”

40 WATTS

80 WATTS

85Hz-22kHz

1.77”

T152

5.25”

1”

60 WATTS

120 WATTS

65Hz-22kHz

1.97”

T1S652

6.5”

1”

70 WATTS

140 WATTS

65Hz-22kHz

1.93”

T1652

6.5”

1”

75 WATTS

150 WATTS

50Hz-22kHz

2.48”

T1462

4”x6”

0.75”

45 WATTS

90 WATTS

75Hz-22kHz

1.97”

T1572

5”x7”

1”

70 WATTS

140 WATTS

60Hz-22kHz

2.28”

T1682

6”x8”

1”

80 WATTS

160 WATTS

55Hz-22kHz

2.56”

T1692

6”x9”

1”

100 WATTS

200 WATTS

50Hz-22kHz

3.39”

T1693

6”x9”

1”

100 WATTS

200 WATTS

50Hz-22kHz

3.39” *Flush Mount

PUNCH P1 SPEAKERS

P1652-S

PUNCH loudspeakers are for those who like it raw and loud. Our patented VAST feature delivers more volume and deeper bass response while our PEI dome tweeter and injection molded cone keep the vocals ultra clear. Designed as a drop in replacement for your factory speakers, we make sure the installation is seamless. Our multi-OEM plate and flex fit basket ensure a proper fit into your ride. While our power handling lets you pull the power youâ&#x20AC;&#x2122;re craving. Donâ&#x20AC;&#x2122;t just listen to your music, feel it.

69 2011 BUYERS GUIDE

P1653

TWEETER

PLATED POLYETHER IMIDE (PEI) DOME

STEALTH BEZEL TRIM RING w/DDC™

STAMPCAST™ W/ FLEX FIT™

INJECTION MOLDED MINERAL FILLED POLYPROPYLENE CONE W/ VAST™ MID-RANGE

12 dB/ OCT INTEGRATED CONCEALED CROSSOVER (ICC)

UNIFIED TAB

FERRITE MOTOR STRUCTURE

Speaker Size

Tweeter Size

RMS Power Handling

Peak Power Handling

Frequency Response

Mounting Depth

P152-S

5.25”

1”

50 WATTS

100 WATTS

70Hz-22kHz

1.87”

P1652-S

6.5”

1”

60 WATTS

120 WATTS

60Hz-22kHz

2.17”

P1T-S

N/A

1”

60 WATTS

120 WATTS

3.5kHz-22kHz

*0.91”

P132

3.5”

0.5”

20 WATTS

40 WATTS

120Hz-22kHz

1.38”

P142

4”

0.75”

30 WATTS

60 WATTS

100Hz-22kHz

1.69”

P152

5.25”

0.75”

40 WATTS

80 WATTS

70Hz-22kHz

1.87”

P1S652

6.5”

0.75”

55 WATTS

110 WATTS

65Hz-22kHz

1.89”

P1653

6.5”

0.75”

60 WATTS

120 WATTS

60Hz-24kHz

2.17”

P1462

4”x6”

0.75”

35 WATTS

70 WATTS

90Hz-22kHz

1.81”

P1572

5”x7”

0.75”

60 WATTS

120 WATTS

75Hz-22kHz

2.20”

P1683

6”x8”

0.75”

65 WATTS

130 WATTS

65Hz-24kHz

2.28”

P1692

6”x9”

0.75”

75 WATTS

150 WATTS

60Hz-22kHz

3.07”

P1694

6”x9”

0.75”

75 WATTS

150 WATTS

60Hz-24kHz

3.07” *Flush Mount

PRIME R1 SPEAKERS

R1693

R1653

Sick of that factory paper cone speaker vibrating your door panel loose? We thought so; weâ&#x20AC;&#x2122;ve designed PRIME loudspeakers to be a no-compromise factory replacement speaker that delivers authentic Rockford sound at a PRIME price point. The ultra lightweight poly cone and dome tweeter make the PRIME drivers efficient enough to hook up directly to your factory head-unit. If you want to kick it up, add a PRIME four channel R300-4 amplifier.

PRIME loudspeakers are a perfect fit for any vehicle.

71 2011 BUYERS GUIDE

MID-RANGE

MICA INJECTED POLYPROPYLENE CONE

18 AWG STAMPED STEEL

R1652-S

TWEETER

MYLAR BALANCED DOME

INTEGRATED TRIM RING

UNIFIED TAB

FERRITE MOTOR STRUCTURE

6 dB/ OCT INTEGRATED CONCEALED CROSSOVER (ICC)

Speaker Size

Tweeter Size

RMS Power Handling

Peak Power Handling

Frequency Response

Mounting Depth

R152-S

5.25”

1”

40 WATTS

80 WATTS

58Hz-20kHz

1.91”

R1652-S

6.5”

1”

40 WATTS

80 WATTS

55Hz-20kHz

2.00”

R1T-S

N/A

1”

40 WATTS

80 WATTS

2.5kHz-22kHz

*0.76”

R142

4”

0.5”

25 WATTS

50 WATTS

100Hz-22kHz

1.64”

R152

5.25”

0.5”

35 WATTS

70 WATTS

53Hz-22kHz

1.91”

R1653

6.5”

0.5”

40 WATTS

80 WATTS

48Hz-22kHz

2.00”

R1682

6”x8”

0.5”

50 WATTS

100 WATTS

57Hz-20kHz

2.54”

R1693

6”x9”

0.5”

60 WATTS

120 WATTS

48Hz-22kHz

2.65” *Flush Mount

SUBWOOFERS

MAKE WAVES

Take the huge bass from the parking lot to the water! Four 12” subs in the hull or a single 10” in a storage compartment, M2 subwoofers are ready for any installation.

SPEAKERS

OVER COME THE ELEMENTS With the M2 full range speakers mounted in your tower you’ll be rockin’ the latest single not the drone of a motor.

S O U R C E

FULL FUNCTION

U N I T S

Whether you brought your favorite MP3, CD, or mobile device to the lake, plug-in and jam out!

MaRINE Proprietary Rockford Technology When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has lead us to develop proprietary amplifier topologies and speaker/amplifier technologies that put a spin on the normal and make it Rockford.

Vertical Attach Surround Technique U.S. Patent (Patent Pending)

Rockfordâ&#x20AC;&#x2122;s proprietary surround technique,VAST, provides up to a 25% increase in the speakers effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing) which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved.

flex fit The slot mounted frame pattern of the Flex Fit basket utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted.

75 2011 BUYERS GUIDE MARINE TECHNOLOGIES

Integrated Concealed Crossover The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier installation.

M2 MARINE GRADE Rockford’s M2 marine grade standard takes into account the devastating effects of the outdoor environment and takes extreme measures to ensure optimum performance.

M A RINE G R A D E

• 100% UV stable CENTREX® injection molded plastic • Corrosion resistant gold plated polarized terminals • Injection molded polypropylene cone with UV inhibitors • Internal full magnetic shielding • Stainless steel grilles and mounting hardware • UV and salt fog resistant thermo-plastic elastomer surround

ASTM B117 – Salt/Fog & D4329 – UV Test Standards ASTM B117 salt/fog test standard provides accelerated aging in a controlled corrosive environment to produce relative corrosion resistance information for specimens of metals and coated metals.

ASTM D4329 test standard is intended to induce property changes associated with end-use conditions, including the effects of sunlight, moisture, and heat.

CEA-2031 Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous damand, not instantaneous power handling, that over time, can damage voice coils.

MARINE SPEAKERS/SUBWOOFERS

Stainless Steel Grille

Bridge MOunted Component Tweeter M262

12 dB/ OCT INTEGRATED CONCEALED CROSSOVER (ICC)

Available in Black (M262B)

CENTREX™ FRAME

Ready to idle your party barge into the cove and serve notice that you’ve arrived? With both 10” & 12” sizes available, M2 subs prove that it doesn’t take haulin’ on the open lake to create the biggest wake! The M2 oversized 8” full range speakers mount perfectly on a wide range of towers to keep you smiling on the short line. However you choose to spend your day on the water, you’ll own it with M2 Marine products.

Speaker Size

Tweeter Size

RMS Power Handling

Peak Power Handling

Frequency Response

Mounting Depth

M262/M262B

6.5”

1”

75 WATTS

150 WATTS

53Hz-22kHz

2.80”

M282/M282B

8”

1”

100 WATTS

200 WATTS

48Hz-22kHz

3.42”

77 2011 BUYERS GUIDE

Tall Profile Santoprene Surround w/ vast™

Available in Black (M212S4B)

M212S4

Nomex Blended Spider w/ multi point stitched lead wire

Shielded Ferrite Motor Structure Gold Plated 8 AWG Compression Terminals

RMS Power Handling

Peak Power Handling

Nominal Impedance

Sealed Enclsoure

*Ported Enclosure

Sensitivity

Mounting Depth

M210S4/M210S4B

250 WATTS

500 WATTS

SINGLE 4Ω

0.75 CU. FT.

1.25 CU. FT. or PORT: (1) 4”x8.52”

86dB

5.45”

M212S4/M212S4B

300 WATTS

600 WATTS

SINGLE 4Ω

1.00 CU. FT.

1.50 CU. FT. or PORT: (1) 3”x5.74”

87dB

6.58” *Infinite Baffle Compatible

MARINE SOURCE UNITS

RFX9700CD

Stainless Steel Chassis

SD Card READER

Water Resistant faceplate

Every boat should have great rockinâ&#x20AC;&#x2122; tunes, and now you can with Rockford Fosgate RF Marine source units. Designed to weather the harsh marine environment, RF Marine source units let you bring your tunes on the water, so crank up your favorite music and make time away from the dock even more enjoyable.

79 2011 BUYERS GUIDE

Thin PRofile Mounting Capacitive Touch Control Panel

RFXMR5BB

RFXMR5BB

RFXMR3

RFXMR6

RFXMR7

Description

Features

Dimensions

Flip down AM/FM Stereo CD Player 40 watts x 4

AM/FM Tuner, Disc Player, MP3, Sirius Ready, iPod Support, USB Input, SD card

DIN size chassis with 1.5 DIN face

Hide-away box w/ AM/FM Stereo for RFXMR5BB 50 watts x 4

AM/FM Tuner, Sirius Ready, iPod Support, USB Input, AUX Input, Video In/Out, Dual Zone, Disc Changer Ready

H 2.50” x W 6.875” x L 8.375”

RFXMR5BB

Waterproof wired remote w/ digital display for RFX3000

3-Line LCD Display, Full Function Control

H 3.90” x W 6.70” x D 0.70”

Waterproof wired remote w/ digital display for RFX3000 & RFX9700CD

LCD Display, Full Function Control

Waterproof wired remote for RFX3000 & RFX9700CD

Full Function Control

Waterproof wired remote w/ digital display for RFX3000 & RFX9700CD

Capactive Touch LCD Display, Full Function Control

RFX9700CD

NEW NEW

RFXMR6

NEW

RFXMR7

NEW

RFX10

10 foot extension cable for RFXMR3, RFXMR6, RFXMR5BB, RFXMR7

10 FT

NEW NEW

Overall Diameter 3.5” (90mm)

RFXMR3

RFX16

16 foot extension cable for RFXMR3 or RFXMR6

16 FT

RFX20

20 foot extension cable for RFXMR5BB, RFXMR7

20 FT

NEW

RFX3000

RFX30

USB and 3.5mm input socket for use with RFX3000

(Mounting Diameter 1.5” (37mm), Depth 1.1” (28mm))

(Mounting Diameter 3” (76mm), Depth 1.1” (29mm))

Overall Diameter 2.5” (64mm)

(Mounting Diameter 2.2” (55mm), Depth .5” (12.5mm))

Overall Diameter 3.5” (90mm)

(Mounting Diameter 3” (76mm), Depth 1.1” (29mm))

Overall Diameter 2” (49mm) w/ 6 FT cable

INTERCONNECTS PURE SIGNAL

Rockford’s twisted and dual twisted oxygen free copper interconnects ensure that the best possible audio signal is supplied to any audio system.

02 F FREE REE

TTWISTED WISTED

1/0-8 1 /0-8 8AWG

PLATINUM P LATINUM

Copper

Pair Design

SPLIT S PLIT TIP TIP Center Pin

MULTI-CUT M ULTI-C CUT Grounding Ring

DISTRIBUTION POWER HUB

Manufactured exclusively with 100% solid brass, Rockford Fosgate distribution accessories provide high current/low resistance connection.

Reducers

Plated

POWER WIRE THE LIFE LINE

Rockford Fosgate power wire meets and exceeds the American Wire Gauge standard guaranteeing that your amplifier won’t be starved for current.

02 F FREE REE Copper

AWG A WG

American Wire Gauge

MARINE M ARINE Grade (BC-5W2)

C A PA C I T O R S BRING THE POWER

Your vehicle’s electrical system was designed to operate the way it rolled off the showroom floor, NOT with the 1000+ watt audio system you just added. Rockford capacitors are designed to help stabilize the additional demand from your upgraded system.

LOW ESR

DIGITAL D IGITAL Display

HYBRID H YBRID

Carbon/Electrolytic

EEXTREME XTREME Flexibility Jacket

ACCESSORIES Exceeding the STANDARD The American Wire Gauge standard was developed to rationalize selecting wire for a particular purpose. In an electronic environment wire size can have a significant impact on performance.

Rockford Fosgate products are designed and engineered to perform at a superior level. It is only fitting that the accessories linking them together perform with same expectation.

The American Wire Gauge Standard The American Wire Gauge standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge.

Rockford Fosgate accessories are all designed and engineered in accordance with the AWG specification.

Anatomy of Wire The construction of wire is broken out into three elements, strands, clusters and bundles. Varying these combinations will directly change the wire gauge and significantly effect the flexibility of the wire.

83 2011 BUYERS GUIDE ACCESSORY TECHNOLOGIES

Wire Size Impacts System Performance The smaller the wire gauge (copper content) the greater the resistance which results in a loss in power to your amplifier(s) and speaker(s), thus creating a poor performing audio system!

rockfordfosgate.com Don’t forget to use our Amp Wire Calculator to optimize output with properly sized wire.

Engineered to Rock PROGRAM We want you to get the maximum performance and reliability from your Rockford Fosgate amplifier. We’re so certain using the right cables make a difference, that we’ll give you an additional 1-Year amplifier warranty when using a matching installation kit! for additional information regarding our Engineered to rock program please visIt us at rockfordfosgate.com

POWER KITS 1/0 AWG

4 AWG

8 AWG

10 AWG

RFK1D

RFK4I

RFK8I

RFK10I

RFK1D - Dual Amp Kit RFK1 - Power Only Kit

RFK4D - Dual Amp Kit RFK4X - Complete Kit RFK4i - Power w/ Interconnect Kit RFK4 - Power Only Kit

RFK8X - Complete Kit RFK8i - Power w/Interconnect Kit RFK8 - Power Only Kit

RFK10i - Power w/Interconnect Kit RFK10 - Power Only Kit

INTERCONNECTS Dual Twisted Pair

Coupler

Twisted Pair

RFIS

RFI-20 RFIT-20

• Available 3ft - 20ft Length • Y-Adapters

• Available 3ft - 20ft Length • Y-Adapters

• Couplers

DISTRIBUTION Battery Post Adapters

Battery Clamps

RFDB1

85 2011 BUYERS GUIDE

Fuses

RFFU30

RFDGM

RFDGM - GM Battery Post Adapter RFDGML - GM Battery Post Adapter for Double Stacked Terminals

Fuse Holders

RFDB1 - 1/0 AWG +/- Battery Clamp RFDB4 - 4 AWG +/- Battery Clamp

RFFANL

RFFanl - Inline ANL or MAXI Fuse Holder RFFaGu - Inline AGU Fuse Holder RFFMAXi - Inline MAXI Fuse Holder RFFDaGu - Fused AGU Distribution Block RFD1 - 1/0 AWG Distribution Block RFD4 - 4 AWG Distribution Block

• ANL Style 500-100A • MAXI Style 100-50A • AGU Style 60-30A

Terminals

RFT1

• Set Screw - 1/0 AWG & 4 AWG • Crimp - 1/0 AWG, 4AWG & 8 AWG • Barrier Spades - 4 AWG & 8 AWG

POWER WIRE 1/0 AWG

4 AWG

RFW4R

8 AWG

RFW8B

Speaker Wire

RFWP12

RFW4B

RFW1R-51

• Red or Black • 51ft Spool

• Red or Black • 100ft Spool

• 12 AWG, 16 AWG, 18 AWG • 250/1000 ft Spool or Packaged

• Red or Black • 250ft Spool

CAPACITORS Hybrid

Electrolytic

RFC10HB RFC1

RFC10hB - 10 Farad Hybrid Digital Capacitor RFC2D - 2 Farad Hybrid Digital Capacitor

RFC1D - 1 Farad Digital Capacitor RFC1 - 1 Farad Capacitor

DEADSKIN

RFDS - Sound Damping Material 20’ square feet

RFDS

for additional Information on Accessories, please visIt rockfordfosgate.com

S/N Ratio

Channel Separation

Dimensions

<0.05%

150mV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L11.41” (Small chassis)

T600-2

200x2 @ 4 ohms 300x2 @ 2 ohms 600x1 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L13.66” (Medium chassis)

T400-4

60x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L13.66” (Medium chassis)

100x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L14.91” (Large chassis)

150x4 @ 4 ohms 150x4 @ 2 ohms 200x4 @ 1 ohm 300x2 @ 4 ohms bridged 400x2 @ 2 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 5V

>95dB

>50dB

T800-4ad

H 2.14” x W 8.14” x L13.66” (Medium chassis)

Class ad w/ Constant Power

20Hz - 20kHz

<1.0%

150mV - 5V

>95dB

>50dB

T1000-4ad

250x4 @ 4 ohms 250x4 @ 2 ohms 250x4 @ 1 ohm 500x2 @ 4 ohms bridged 500x2 @ 2 ohms bridged

H 2.14” x W 8.14” x L14.91” (Large chassis)

Class ad w/ Constant Power and 4/2/1

T500-1bdCP

300x1 @ 4 ohms 500x1 @ 2 ohms 500x1 @ 1 ohm

20Hz - 250Hz

<0.5%

150mV - 5V

>100dB

N/A

H 2.14” x W 8.14” x L11.41” (Small chassis)

T1000-1bdCP

700x1 @ 4 ohms 1000x1 @ 2 ohms 1000x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.14” x W 8.14” x L13.66” (Medium chassis)

1000x1 @ 4 ohms 1500x1 @ 2 ohms 1500x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

(Available in CustomShop)

H 2.14” x W 8.14” x L14.91” (Large chassis)

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

T2500-1bdCP

1500x1 @ 4 ohms 2500x1 @ 2 ohms 2500x1 @ 1 ohm

H 2.14” x W 8.14” x L21.9” (X-Large chassis)

P200-2

50x2 @ 4 ohms 100x2 @ 2 ohms 200x1 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.2” x W 7.7” x L 8.9” (Mini chassis)

P300-2

75x2 @ 4 ohms 150x2 @ 2 ohms 300x1 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.2” x W 7.7” x L 8.9” (Mini chassis)

P400-2

100x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.2” x W 7.7” x L 10.3” (Small chassis)

P500-2

125x2 @ 4 ohms 250x2 @ 2 ohms 500x1 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.2” x W 7.7” x L 13” (Medium chassis)

P400-4

50x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.2” x W 7.7” x L 13” (Medium chassis)

P500-4

60x4 @ 4 ohms 125x4 @ 2 ohms 250x2 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.2” x W 7.7” x L 13” (Medium chassis)

P300-1

150x1 @ 4 ohms 300x1 @ 2 ohms

20Hz - 20kHz

<0.1%

150mV - 5V

>100dB

N/A

H 2.2” x W 7.7” x L 8.9” (Mini chassis)

P400-1

200x1 @ 4 ohms 400x1 @ 2 ohms

20Hz - 20kHz

<0.1%

150mV - 5V

>100dB

N/A

H 2.2” x W 7.7” x L 8.9” (Mini chassis)

P500-1bd

200x1 @ 4 ohms 400x1 @ 2 ohms 500x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.2” x W 7.7” x L 10.3” (Small chassis)

P700-1bd

225x1 @ 4 ohms 450x1 @ 2 ohms 700x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.2” x W 7.7” x L 10.3” (Small chassis)

P1000-1bd

250x1 @ 4 ohms 500x1 @ 2 ohms 1000x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.2” x W 7.7” x L 14.4” (Large chassis)

P500X4D

75x4 @ 4 ohms 125x4 @ 2 ohms 250x2 @ 4 ohms bridged

20Hz - 20kHz

<0.1%

150mV - 5V

>100dB

>50dB

H 2.2” x W 8.1” x L 10.7”

P1000X4D

150x4 @ 4 ohms 250x4 @ 2 ohms 500x2 @ 4 ohms bridged

20Hz - 20kHz

<0.1%

150mV - 5V

>100dB

>50dB

H 2.2” x W 8.1” x L 11.9”

75x4 + 200x1 @ 4 ohms 125x4 + 500x1 @ 2 ohms 250x2 + N/A @ 4 ohms bridged

20Hz - 20kHz

<0.1%

150mV - 5V

>100dB

>50dB

H 2.2” x W 8.1” x L 10.7”

Full Range Class d + Class d

4 layer 2 oz. copper circuit board

24 dB/oct - variable High or Low Pass and All Pass

500x1 @ 4 ohms 1000x1 @ 2 ohms 1000x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.2” x W 8.1” x L 11.9”

Class d

4 layer 2 oz. copper circuit board

12 dB/oct - variable Low Pass

T600-4

(Available in CustomShop)

T1500-1bdCP

P1000X5D

P1000X1D

87 2011 BUYERS GUIDE AMPLIFIER SPECIFICATIONS/FEATURES

TRANS•ana

Variable Crossover

Input Sensitivity

Circuit Board

THD+N @ Rated Power

20Hz - 20kHz

Topology

Frequency Response

120x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms bridged

Rated Power T400-2

4 layer 3 oz. copper circuit board

24 dB/oct - variable High or Low Pass and All Pass

Class bd w/ Constant Power

4 layer 3 oz. copper circuit board

24 dB/oct - variable Low Pass

TRANS•ana

4 layer 2 oz. copper circuit board

12 dB/oct - variable High or Low Pass and All Pass

Class bd

4 layer 2 oz. copper circuit board

12 dB/oct - variable Low Pass

Full Range Class d

4 layer 2 oz. copper circuit board

12 dB/oct - variable High or Low Pass and All Pass 24 dB/oct - variable High or Low Pass and All Pass

Speaker Terminals

Additional Features

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

Power Terminals

Status Indicators Discrete light pipe Power, Thermal and Protection indicators

RCA Inputs

Protection NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Heatsink Design

Impedance Stability 1 ohm stereo / 2 ohm mono stable

Balanced differential RCA inputs and RCA pass thru

4 Ga. c-clamp compression connector

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +12dB @ 12KHz with optional PEQ

Balanced differential RCA inputs and RCA pass thru

4 Ga. c-clamp compression connector

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Equalization

Balanced differential panel mount RCA and RCA pass thru

stealth proprietary 1/0 Ga. 4mm allen head set-screw cast zinc connector

stealth proprietary 8 Ga. 4mm allen head set-screw cast zinc connector

Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Equalization and BDSync or Master/Slave

Balanced differential RCA inputs

4 Ga. c-clamp compression connector

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +12dB @ 12KHz with optional Punch Equalization

Differential RCA inputs

Differential RCA inputs and RCA pass thru Focused mass die-cast heatsink / 4-Point Thermal Monitoring / MEHSA™- Maximum Efficiency HeatSink Application

Differential RCA inputs

Differential RCA inputs and RCA pass thru

1 ohm mono rated

NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Discrete light pipe Power, Thermal and Protection indicators

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

Discrete light pipe Power, Thermal and Protection indicators / In Mold Roll LED backlit signal/power Volume Units meters 2 ohm stereo / 4 ohm mono rated

NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Discrete light pipe Power, Thermal and Protection indicators

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

2 ohm mono rated

Differential RCA inputs

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +12dB @ 12KHz with optional Punch Equalization

Balanced differential RCA inputs

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +12dB @ 12KHz with optional Punch Equalization

1 ohm mono rated

NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Discrete light pipe Power, Thermal and Protection indicators

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

Balanced differential RCA inputs and RCA pass thru

4 Ga. c-clamp compression connector

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Equalization

2 ohm stereo / 4 ohm mono rated

• Short Circuit • Thermal

Discrete Power and Protection indicators

Focused mass die-cast heatsink

RCA input and RCA pass thru

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ variable from 0dB to +18dB @ 45Hz

2 ohm stereo / 2 ohm mono rated

• Short Circuit • Thermal

Discrete Power and Protection indicators

Focused mass die-cast heatsink

RCA input and RCA pass thru

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Equalization level control and infrasonic filter

1 ohm mono rated

• Short Circuit • Thermal

Discrete Power and Protection indicators

Focused mass die-cast heatsink

RCA input and RCA pass thru

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Equalization level control and infrasonic filter

*Specifications subject to change

Balanced differential RCA inputs and RCA pass thru

THD+N @ Rated Power

Input Sensitivity

S/N Ratio

Channel Separation

Dimensions

Topology

20Hz - 20kHz

<0.5%

150mV - 11V

>100dB

>50dB

H 1.5” x W 4.25” x L 6.75”

Class br

6 layer 2 oz. copper circuit board

12 dB/oct - 80Hz fixed High or Low Pass and All Pass

75x1 @ 4 ohms 150x1 @ 2 ohms 300x1 @ 1 ohm

20Hz - 250Hz

<0.2%

150mV - 11V

>105dB

N/A

H 1.5” x W 4.25” x L 6.75”

Class br

4 layer 2 oz. copper circuit board

12 dB/oct - variable Low Pass

R150-2

50x2 @ 4 ohms 75x2 @ 2 ohms 150x1 @ 4 ohms bridged

20Hz - 20kHz

<0.1%

150mV - 8V

>90dB

>50dB

H 2.4” x W 7.7” x L 11.5”

Class ab

Single layer 2 oz. copper circuit board

12 dB/oct - 80Hz fixed High Pass / variable Low Pass / All Pass

R300-4

50x4 @ 4 ohms 75x4 @ 2 ohms 150x2 @ 4 ohms bridged

20Hz - 20kHz

<0.1%

150mV - 8V

>90dB

>50dB

H 2.4” x W 7.7” x L 17.1”

Class ab

Single layer 2 oz. copper circuit board

12 dB/oct - 80Hz fixed High Pass / variable Low Pass / All Pass

50x4 + 200x1 @ 4 ohms 75x4 + 300x1 @ 2 ohms 150x2 + N/A @ 4 ohms bridged

20Hz - 20kHz

<0.1%

150mV - 8V

>90dB

>50dB

H 2.4” x W 7.7” x L 17.1”

Class ab + Class d

Single layer 2 oz. copper circuit board

12 dB/oct - 80Hz fixed High Pass / variable Low Pass / All Pass

R250-1

150x1 @ 4 ohms 250x1 @ 2 ohms

20Hz - 250Hz

<0.1%

150mV - 8V

>100dB

N/A

H 2.4” x W 7.7” x L 11.5”

Class ab

Single layer 2 oz. copper circuit board

12 dB/oct - variable Low Pass

R500-1

320x1 @ 4 ohms 500x1 @ 2 ohms

20Hz - 250Hz

<0.1%

150mV - 8V

>100dB

N/A

H 2.4” x W 7.7” x L 16.7”

500x1 @ 4 ohms 1000x1 @ 2 ohms

20Hz - 250Hz

<0.1%

150mV - 8V

>100dB

N/A

H 2.4” x W 7.7” x L 11.5”

Class d

Single layer 2 oz. copper circuit board

12 dB/oct - variable Low Pass

R400-4D

75x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged

20Hz - 20kHz

<0.1%

150mV - 5V

>90dB

>50dB

H 2.0” x W 6.8” x L 9.1”

Full Range Class d

4 layer 2 oz. copper circuit board

12 dB/oct - variable High or Low Pass and All Pass

R600-4D

100x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms bridged

20Hz - 20kHz

<0.1%

150mV - 5V

>90dB

>50dB

H 2.0” x W 6.8” x L 11.1”

R750-1D

250x1 @ 4 ohms 500x1 @ 2 ohms 750x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.0” x W 6.8” x L 9.1”

Class d

4 layer 2 oz. copper circuit board

12 dB/oct - variable Low Pass

R1200-1D

400x1 @ 4 ohms 800x1 @ 2 ohms 1200x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.0” x W 6.8” x L 11.1”

PBR300X1

R600-5

R1000-1D

89 2011 BUYERS GUIDE AMPLIFIER SPECIFICATIONS/FEATURES

Variable Crossover

Frequency Response

Circuit Board

Rated Power 75x4 @ 4 ohms

PBR300X4

Status Indicators

RCA Inputs

Power Terminals

Speaker Terminals

Additional Features

LED Power/Protection and boost mode indicators

Inter-locking extruded aluminum heatsinks w/ pierced metal recessed badge

RCA/Speaker level pigtailed Molex connector

10 Ga. Molex connector

16 Ga. pigtailed Molex connector

Variable high-level adjust and 6V DC offset w/ remote out

1 ohm mono rated

• Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

LED Power/Protection and boost mode indicators

Inter-locking extruded aluminum heatsinks w/ pierced metal recessed badge

RCA/Speaker level pigtailed Molex connector

10 Ga. Molex connector

16 Ga. pigtailed Molex connector

Optional Punch Equlization Variable from 0dB to +18dB @ 45Hz, variable high-level adjust and 6V DC offset w/ remote out

2 ohm stereo / 4 ohm mono rated

• Short Circuit • Thermal

LED Power and Protection indicators

Extruded aluminum heatsink w/ pierced metal recessed badge

RCA input and RCA pass thru

4 Ga. spade connector

12 Ga. spade connector

2 ohm stereo / 4 ohm mono rated

• Short Circuit • Thermal

LED Power and Protection indicators

Extruded aluminum heatsink w/ pierced metal recessed badge

RCA input and RCA pass thru

4 Ga. spade connector

12 Ga. spade connector

2 ohm stereo / 4 ohm mono rated - Front/Rear and 2 ohm mono rated - Sub

• Short Circuit • Thermal

LED Power and Protection indicators

Extruded aluminum heatsink w/ pierced metal recessed badge

RCA input and RCA pass thru

4 Ga. spade connector

12 Ga. spade connector

Punch Bass 0dB/+6dB/+12dB @ 45Hz - Front/Rear and Variable from 0dB to +12dB @ 45Hz - Sub

2 ohm mono rated

• Short Circuit • Thermal

LED Power and Protection indicators

Extruded aluminum heatsink w/ pierced metal recessed badge

RCA input and RCA pass thru

4 Ga. spade connector

12 Ga. spade connector

Punch Bass variable from 0dB to +12dB @ 45Hz and included Punch Level Control

2 ohm mono rated

• Short Circuit • Thermal

LED Power and Protection indicators

Extruded aluminum heatsink w/ pierced metal recessed badge

RCA input and RCA pass thru

4 Ga. spade connector

12 Ga. spade connector

Punch Bass variable from 0dB to +12dB @ 45Hz and included Punch Level Control

2 ohm stereo / 4 ohm mono rated

• Short Circuit • Thermal

LED Power and Protection indicators

Focused mass die-cast heatsink

RCA input and RCA pass thru

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ variable from 0dB to +18dB @ 45Hz

1 ohm mono rated

• Short Circuit • Thermal

LED Power and Protection indicators

Focused mass die-cast heatsink

RCA input and RCA pass thru

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Equalization level control and infrasonic filter

*Specifications subject to change

Protection • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Heatsink Design

Impedance Stability 4 ohm stereo ONLY

Sensitivity

RMS Power Handling (watts)

Peak Power Handling (watts)

Mounting Diameter

Mounting Depth

Speaker Displacement (cu. ft.)

Sealed Enclosure (cu. ft.)

22.08

85 dB

1200

2400

10.8"

9.0"

0.151

N/A

T2D215/T2D415

15”

Dual 2 Ω or 4 Ω

22.0

87 dB

1200

2400

13.94"

10.0"

0.176

N/A

2.75 cu ft. Port: (1) 6”x17”

T1D210/T1D410

10”

Dual 2 Ω or 4 Ω

16.4

83 dB

600

1200

9.13"

6.5"

0.203

0.75

1.50 cu ft. Port: (1) 4”x11”

T1D212/T1D412

12”

Dual 2 Ω or 4 Ω

16.4

86 dB

800

1600

11.25"

6.9"

0.308

1.25

1.75 cu ft. Port: (1) 4”x9”

T1D215/T1D415

15”

Dual 2 Ω or 4 Ω

16.4

88 dB

1000

2000

13.94"

8.4"

0.547

2.25

2.66 cu ft. Port: (1) 4”x10”

T0D210/T0D410

10”

Dual 2 Ω or 4 Ω

14.8

81 dB

550

1100

9.13"

6.5"

0.203

0.75

1.50 cu ft. Port: (1) 4”x11”

T0D212/T0D412

12”

Dual 2 Ω or 4 Ω

14.8

84 dB

700

1400

11.25"

6.9"

0.308

1.25

1.75 cu ft. Port: (1) 4”x9”

T0D215/T0D415

15”

Dual 2 Ω or 4 Ω

14.8

87 dB

800

1600

13.94"

8.4"

0.547

2.25

2.66 cu ft. Port: (1) 4”x10”

P3D2-10/P3D4-10

10”

Dual 2 Ω or 4 Ω

15.9

82 dB

500

1000

9.13"

6.2"

0.127

0.59

1.40 cu ft. Port: (1) 4”x14”

P3D2-12/P3D4-12

12”

Dual 2 Ω or 4 Ω

15.9

85 dB

600

1200

11.25"

6.7"

0.194

1.02

1.79 cu ft. Port: (1) 4”x10”

P3D2-15/P3D4-15

15”

Dual 2 Ω or 4 Ω

15.9

86 dB

600

1200

13.94"

7.6"

0.247

1.58

2.66 cu ft. Port: (1) 4”x10”

8”

Dual 2 Ω or 4 Ω

7.8

83 dB

250

500

7.13"

4.8"

0.071

0.23

0.65 cu ft. Port: (1) 2”x8”

P2D2-10/P2D4-10

10”

Dual 2 Ω or 4 Ω

11

84 dB

300

600

9.13"

5.9"

0.088

0.59

1.40 cu ft. Port: (1) 4”x14”

P2D2-12/P2D4-12

12”

Dual 2 Ω or 4 Ω

13.3

86 dB

400

800

11.25"

6.4"

0.170

1.02

1.79 cu ft. Port: (1) 4”x10”

P2D2-15/P2D4-15

15”

Dual 2 Ω or 4 Ω

13.3

86 dB

400

800

13.94"

7.3"

0.219

1.58

2.66 cu ft. Port: (1) 4”x10”

8”

Single 4 Ω or 8 Ω

7.6

83.5 dB

200

400

7.13"

4.4"

0.053

0.23

0.65 cu ft. Port: (1) 2”x6”

P1S4-10/P1S8-10

10”

Single 4 Ω or 8 Ω

9.4

85 dB

250

500

9.13"

5.3"

0.085

0.59

1.40 cu ft. Port: (1) 3”x8”

P1S4-12/P1S8-12

12”

Single 4 Ω or 8 Ω

9.4

86 dB

250

500

11.25"

6.0"

0.113

1.02

1.79 cu ft. Port: (1) 3”x6”

P1S4-15/P1S8-15

15”

Single 4 Ω or 8 Ω

9.4

87.5 dB

250

500

13.94"

7.0"

0.191

1.58

2.66 cu ft. Port: (1) 4”x8”

P3SD210/P3SD410

10”

Dual 2 Ω or 4 Ω

13.4

83 dB

300

600

9.13"

3.5"

0.061

0.50

0.75 cu ft. Port: (1) 3”x12

P3SD212/P3SD412

12”

Dual 2 Ω or 4 Ω

13.4

86 dB

400

800

11.25"

3.6"

0.071

1.00

1.25 cu ft. Port: (1) 4”x12

R2D210/R2D410

10”

Dual 2 Ω or 4 Ω

6.5

89 dB

250

500

9.13"

4.3"

0.101

0.59

1.40 cu ft. Port: (1) 4”x13”

R2D212/R2D412

12”

Dual 2 Ω or 4 Ω

6.5

87 dB

250

500

11.25"

5.1"

0.150

1.02

1.79 cu ft. Port: (1) 4”x9.3”

R2SD210/R2SD410

10”

Dual 2 Ω or 4 Ω

8

83 dB

200

400

9.13"

3.4"

0.037

0.70

1.40 cu ft. Port: (1) 4”x13.7”

R2SD212/R2SD412

12”

Dual 2 Ω or 4 Ω

10

85 dB

250

500

11.25"

3.6"

0.039

0.90

1.79 cu ft. Port: (1) 4”x11.8”

R1S410

10”

Single 4 Ω

5.8

86 dB

150

300

9.13"

4.6"

0.024

0.75

N/A

R1S412

12”

Single 4 Ω

6.3

87 dB

150

300

10.94"

5.0"

0.043

1.02

N/A

M210S4/M210S4B

10”

Single 4 Ω

10

86 dB

250

500

9.13"

5.45"

0.154

0.75”

1.25 cu ft. Port: (1) 4”x8.52” *Infinite Baffle compatible

M212S4/M212S4B

12”

Single 4 Ω

12

87 dB

300

600

11.25"

6.58"

0.258

1.00”

1.50 cu ft. Port: (1) 3”x5.7 4” *Infinite Baffle compatible

P2D2-8/P2D4-8

P1S4-8/P1S8-8

Speaker Model

Nominal Impedance

RMS Power Handling

Peak Power Handling

Dimensions (HxWxD)

Dustcap Material

Xmax (mm)

Dual 2 Ω or 4 Ω

*Surround Material

Nominal Impedance

12”

Ported Enclosure

Speaker Size T2D212/T2D412

2.00 cu ft. Port: (3) 3”x12”

Tall profile, high density Santoprene™

Hard anodized aluminum

Tall profile, Santoprene™ with VAST™

Hard anodized aluminum

Tall profile, Santoprene™ with VAST™

Hard anodized aluminum

Tall profile, Santoprene™ with VAST™

Hard anodized aluminum

Tall profile, Santoprene™ with VAST™

Kevlar fiber reinforced semi-pressed paper

Half-roll, high density Nitrile Butadiene Rubber

Kevlar fiber reinforced semi-pressed paper

Half-roll, Sealed Polyether-ester foam

Acrylonitrile Butadiene Styrene (ABS) blend

Half-roll, Sealed Polyether-ester foam

Polypropylene

Half-roll, Sealed Polyether-ester foam

Injection molded Polypropylene

Half-roll, Nitrile Butadiene Rubber

Polypropylene

Tall profile, Santoprene™ with VAST™

Injection molded Polypropylene

Speaker Model

Nominal Impedance

RMS Power Handling

Peak Power Handling

Dimensions (HxWxD)

P1-1X10

(1) P1S4-10

4Ω

250 Watts

500 Watts

13.125” x 17.0” x 15.125”

P3-1X10

(1) P3D2-10

1Ω

500 Watts

1000 Watts

13.125” x 17.0” x 15.125”

P1-2X10

(2) P1S4-10

2Ω

500 Watts

1000 Watts

13.125” x 31.125” x 15.125”

P3-2X10

(2) P3D4-10

1Ω

1000 Watts

2000 Watts

13.125” x 31.125” x 15.125”

P1-1X12

(1) P1S4-12

4Ω

250 Watts

500 Watts

15.125” x 19.125” x 15.75”

P3-1X12

(1) P3D2-12

1Ω

600 Watts

1200 Watts

15.125” x 19.125” x 15.75”

P1-2X12

(2) P1S4-12

2Ω

500 Watts

1000 Watts

15.125” x 33.875” x 15.75”

P3-2X12

(2) P3D4-12

1Ω

1200 Watts

2400 Watts

15.125” x 33.875” x 15.75”

P2-1X10

(1) P2D2-10

1Ω

300 Watts

600 Watts

13.125” x 17.0” x 15.125”

P3L-S10

(1) P3SD210

1Ω

300 Watts

600 Watts

13.5" x 19.0" x 5.3"/3.3"

P2-2X10

(2) P2D4-10

1Ω

600 Watts

1200 Watts

13.125” x 31.125” x 15.125”

P3L-S12

(1) P3SD212

1Ω

400 Watts

800 Watts

13.5" x 27.4" x 5.3"/3.3"

P2-1X12

(1) P2D2-12

1Ω

400 Watts

800 Watts

15.125” x 19.125” x 15.75”

P2-2X12

(2) P2D4-12

1Ω

800 Watts

1600 Watts

15.125” x 33.875” x 15.75”

91 2011 BUYERS GUIDE SUBWOOFER/LOADED ENCLOSURE SPECIFICATIONS/FEATURES

Motor Structure

Motor Cover

Terminal Connectors

Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique

Die-cast aluminum

Triple stack ferrite magnet with extended vented pole and bumped vented backplate with IDHS™

Die-cast motor cover/heat sink

Dual 8 Ga. custom insulated/isolated compression style

Reversible die-cast aluminum w/ Soft Touch paint

Kevlar® fiber reinforced semipressed paper

3" 4-layer ultra-high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents

Die-cast aluminum with FlexFit™

Double stack ferrite magnet with extended vented pole and bumped vented backplate with IDHS™

Frame integrated

Dual 10 Ga. proprietary SWIFT™ terminal

Reversible die-cast aluminum w/ Soft Touch paint and integrated/removable grille

Kevlar® fiber reinforced semipressed paper

3" 4-layer ultra-high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents

Die-cast aluminum with FlexFit™

Double stack ferrite magnet with extended vented pole and bumped vented backplate

Frame integrated

Dual 10 Ga. proprietary SWIFT™ terminal

Reversible die-cast aluminum w/ Soft Touch paint and integrated/removable grille

Hard anodized aluminum

2.5" 4-layer ultra-high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents

StampCast™ with FlexFit™

Double stack ferrite magnet with extended vented pole and bumped vented backplate

Removable Semi-flexible Polyvinyl Chloride (PVC)

8 Ga. custom insulated/isolated compression style

Reversible die-cast aluminum w/ Soft Touch paint and optional integrated grille

Kevlar® fiber reinforced semipressed paper

2.25" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents

StampCast™ with FlexFit™

Double stack ferrite magnet structure with extended vented pole and bumped backplate.

Removable Semi-flexible Polyvinyl Chloride (PVC)

8 Ga. custom insulated/isolated compression style

Reversible die-cast aluminum w/ Soft Touch paint and optional integrated grille

Kevlar® fiber reinforced semipressed paper

2" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents.

StampCast™ with FlexFit™

Ferrite magnet structure with extended vented pole and bumped backplate.

Removable Semi-flexible Polyvinyl Chloride (PVC)

8 Ga. custom insulated/isolated compression style

Reversible Acrylonitrile Butadiene Styrene with optional integrated grille

Kevlar® fiber reinforced paper

2.5" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents

Die-cast aluminum

Ferrite magnet structure with extended vented pole and bumped vented backplate.

Removable Semi-flexible Polyvinyl Chloride (PVC)

Standard 8 Ga.

Reversible die-cast aluminum w/ Soft Touch paint and optional grille

Polypropylene

2" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and spider cooling vents.

Stamped steel

Ferrite magnet structure with extended vented pole and bumped backplate.

Removable Semi-flexible Polyvinyl Chloride (PVC)

Standard 10 Ga.

Integrated Polyvinyl Chloride trim ring

Injection molded Polypropylene

2" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and spider cooling vents.

Stamped steel

Ferrite magnet structure with extended vented pole and bumped backplate.

Standard 10 Ga.

Integrated Polyvinyl Chloride trim ring

Polypropylene

2" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Tear & fatigue resistant poly-cotton spider

Stamped steel

Ferrite magnet structure with extended vented pole and bumped backplate.

Standard 10 Ga.

Injection molded Polypropylene

2" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Tear & fatigue resistant Nomex™ blend spider with multipoint stitched lead wire technique.

Centrex™

Shielded ferrite magnet structure with extended vented pole and bumped backplate.

Nominal Impedance

RMS Power Handling

Peak Power Handling

Dimensions (HxWxD)

R1L-1X10

(1) R1S410

4Ω

150 Watts

300 Watts

12.0” x 15.825” x 12.25”

R1L-2X10

(2) R1S410

2Ω

300 Watts

600 Watts

12.0” x 30.0” x 12.25”

R1L-1X12

(1) R1S412

4Ω

150 Watts

300 Watts

14.0” x 17.5” x 12.25”

R1L-2X12

(2) R1S412

2Ω

300 Watts

600 Watts

14.0” x 33.75” x 12.25”

R300-10

N/A

N/A

300 Watts

600 Watts

13.3”x18.38”x9.37”

R300-12

N/A

N/A

300 Watts

600 Watts

14.96”x20.35”x11.50”

Proprietary gold plated compression terminal. 8 Ga.

Water draining Centrex™ trim ring with integrated stainless steel grille

*Specifications subject to change

Spider

Cone Material

Speaker Model

Sealed Centrex™ motor cover

Trim Ring

Frame Structure

4" 4-layer ultra-high temp. aluminum flat-wound voice coil with spun-laced Nomex™ insulating reinforcement collar

Voice Coil

Hard anodized aluminum

Peak Power Handling (watts)

Frequency Response

Sensitivity (1W/1M)

Sensitivity (2.83V/1M)

300 watts

45Hz-40kHz

88.5dB

91.5dB

T3652-S

6.5”

1”

125 watts

250 watts

48Hz-24kHz

87dB

90dB

2.48”

T252-S

5.25”

1”

75 watts

150 watts

65Hz-22kHz

87dB

90dB

1.97”

T2652-S

6.5”

1”

100 watts

200 watts

50Hz-22kHz

88dB

91dB

2.48”

T2T-S

N/A

1”

100 watts

200 watts

3kHz-22kHz

90dB

93dB

*0.91”

T152-S

5.25”

1”

75 watts

150 watts

65Hz-22kHz

87dB

90dB

1.97”

T1652-S

6.5”

1”

100 watts

200 watts

50Hz-22kHz

88dB

91dB

2.48”

T1T-S

N/A

1”

100 watts

200 watts

3kHz-22kHz

90dB

93dB

*0.91”

T142

4”

0.75”

40 watts

80 watts

85Hz-22kHz

85dB

88dB

1.77”

T152

5.25”

1”

60 watts

120 watts

65Hz-22kHz

87dB

90dB

1.97”

T1S652

6.5”

1”

70 watts

140 watts

65Hz-22kHz

87.5dB

90.5dB

1.93”

T1652

6.5”

1”

75 watts

150 watts

50Hz-22kHz

88dB

91dB

2.48”

T1462

4”x6”

0.75”

45 watts

90 watts

75Hz-22kHz

85.5dB

88.5dB

1.97”

T1572

5”x7”

1”

70 watts

140 watts

60Hz-22kHz

87.5dB

90.5dB

2.28”

T1682

6”x8”

1”

80 watts

160 watts

55Hz-22kHz

88dB

91dB

2.56”

T1692

6”x9”

1”

100 watts

200 watts

50Hz-22kHz

90dB

93dB

3.39”

T1693

6”x9”

1”

100 watts

200 watts

50Hz-22kHz

90dB

93dB

3.39”

P152-S

5.25”

1”

50 watts

100 watts

70Hz-22kHz

87dB

90dB

1.87”

P1652-S

6.5”

1”

60 watts

120 watts

60Hz-22kHz

89dB

92dB

2.17”

P1T-S

N/A

1”

60 watts

120 watts

3.5kHz-22kHz

90dB

93dB

*0.91”

P132

3.5”

0.5”

20 watts

40 watts

120Hz-22kHz

85dB

88dB

1.38”

P142

4”

0.75”

30 watts

60 watts

100Hz-22kHz

86.5dB

89.5dB

1.69”

P152

5.25”

0.75”

40 watts

80 watts

70Hz-22kHz

87dB

90dB

1.87”

P1S652

6.5”

0.75”

55 watts

110 watts

65Hz-22kHz

88dB

91dB

1.89”

P1653

6.5”

0.75”

60 watts

120 watts

60Hz-24kHz

89dB

92dB

2.17”

P1462

4”x6”

0.75”

35 watts

70 watts

90Hz-22kHz

87.5dB

90.5dB

1.81”

P1572

5”x7”

0.75”

60 watts

120 watts

75Hz-22kHz

89dB

92dB

2.20”

P1683

6”x8”

0.75”

65 watts

130 watts

65Hz-24kHz

90dB

93dB

2.28”

P1692

6”x9”

0.75”

75 watts

150 watts

60Hz-22kHz

91dB

94dB

3.07”

P1694

6”x9”

0.75”

75 watts

150 watts

60Hz-24kHz

91dB

94dB

3.07”

R152-S

5.25”

1”

40 watts

80 watts

58Hz-20kHz

85dB

88dB

1.91”

R1652-S

6.5”

1”

40 watts

80 watts

55Hz-20kHz

89dB

92dB

2.00”

R1T-S

N/A

1”

40 watts

80 watts

2.5kHz-22kHz

72.5dB

75.5dB

*0.76”

R142

4”

0.5”

25 watts

50 watts

100Hz-22kHz

85.5dB

88.5dB

1.64”

R152

5.25”

0.5”

35 watts

70 watts

53Hz-22kHz

87dB

90dB

1.91”

R1653

6.5”

0.5”

40 watts

80 watts

48Hz-22kHz

89dB

92dB

2.00”

R1682

6”x8”

0.5”

50 watts

100 watts

57Hz-22kHz

88dB

91dB

2.54”

R1693

6”x9”

0.5”

60 watts

120 watts

48Hz-22kHz

90dB

93dB

2.65”

M262/M262B

6.5”

1”

75 watts

150 watts

53Hz-22kHz

88dB

91dB

2.80”

M282/M282B

8”

1”

100 watts

200 watts

48Hz-22kHz

90dB

93dB

3.42”

Butyl rubber with VAST™

Tri-laminate Liquid Crystal Polymer Fiber w/ machined copper phase plug

Nomex™ w/ balanced stitched woven embedded fiber/flat lead wires

Die-cast aluminum with FlexFit™

Butyl rubber with VAST™

Woven Liquid Crystal Polymer Fiber™

Nomex™ w/ balanced stitched woven embedded fiber/flat lead wires

Die-cast aluminum with FlexFit™

Butyl rubber with VAST™

Injection molded Polypropylene-carbon fiber blend w/ machined aluminum phase plug

Fatigue resistant poly-cotton linear spider w/ woven fiber reinforced lead wire

StampCast™ with Flex-fit™

Fatigue resistant poly-cotton linear spider w/ woven fiber reinforced lead wire

StampCast™ with Flex-fit™

Frame Structure

2.48”

Spider

Cone Material

RMS Power Handling (watts) 150 watts

Surround Material

Tweeter Size 1”

Mounting Depth

Speaker Size 6.5”

T5652-S

Aluminum dome w/ integral suspension & tuned chamber Butyl rubber with VAST™

Injection molded Polypropylene-carbon fiber blend Treated fabric dome w/ integral suspension & tuned chamber

Butyl rubber with VAST™

Injection molded Polypropylene-carbon fiber blend

Fatigue resistant poly-cotton linear spider w/ woven fiber reinforced lead wire

StampCast™ with Flex-fit™

Nitrile Butadiene Rubber with VAST™

Injection molded mineral filled Polypropylene

Fatigue resistant poly-cotton linear spider w/ woven fiber reinforced lead wire

StampCast™ with Flex-fit™

Plated Polyether Imide (PEI) dome Nitrile Butadiene Rubber with VAST™

Injection molded mineral filled Polypropylene

Fatigue resistant poly-cotton linear spider w/ woven fiber reinforced lead wire

StampCast™ with Flex-fit™

Sealed Polyetherester foam

Vacuum formed Polypropylene

Fatigue resistant spider

Stamped steel

Mylar balanced dome Sealed Polyetherester foam

Vacuum formed Polypropylene

Fatigue resistant spider

Stamped steel

Ultraviolet & salt-fog resistant Thermo-Plastic Elastomer

Injection molded, parabolic shape mineral filled Polypropylene w/ UV inhibitors

Moisture, tear and fatigue resistant aramid fiber spider

Injection molded 100% UV stable Centrex® w/ Flex-fit™

*Flush Mount

93 2011 BUYERS GUIDE SPEAKERS SPECIFICATIONS/FEATURES

Accessories

Neodymium magnet w/ IDHS™

1"(25mm) Liquid Crystal Polymer Fiber™ dome w/ neodymium magnet and DDC™

External audiophile grade component crossover w/ 5% (Tol) parts

3-way connection terminal

Grilles and mounting hardware

1”(25mm) aluminum dome w/ neodymium motor and DDC™

External audiophile grade component crossover w/ 5% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

External audiophile grade component crossover w/ 5% (Tol) parts

18 Ga. Pigtail

Flush w/ DDC™, surface and angle mounting hardware

External audiophile grade component crossover w/ 5% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

External audiophile grade component crossover w/ 5% (Tol) parts

18 Ga. Pigtail

Flush w/ DDC™, surface and angle mounting hardware

Ferrite magnet structure

Removable Semi-flexible Polyvinyl Chloride

Neodymium

Ferrite magnet structure

Removable Semi-flexible Polyvinyl Chloride

1”(25mm) treated fabric dome w/ neodymium motor and DDC™

Neodymium

Ferrite magnet structure

Removable Semi-flexible Polyvinyl Chloride

1”(25mm) aluminum dome w/ neodymium motor and DDC™

ICC™ component crossover with 5% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

Ferrite magnet structure

Removable Semi-flexible Polyvinyl Chloride

1”(25mm) plated Polyether Imide (PEI) dome w/ neodymium motor and DDC™

ICC™ component crossover with 10% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

External component crossover w/ 10% (Tol) parts

18 Ga. Pigtail

Flush w/ DDC™, surface and angle mounting hardware

3/4”(20mm) pole mounted plated Polyether Imide (PEI) dome w/ neodymium motor

ICC™ with 10% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

1”(25mm) mylar balanced dome

Integrated high-pass crossover

Standard spade connector

Grilles and mounting hardware

Integrated high-pass crossover

18 Ga. Pigtail

Flush, surface and angle mounting hardware

1/2”(13mm) pole mounted mylar balanced dome

Integrated high-pass crossover

Standard spade connector

Grilles and mounting hardware

1”(25mm) bridge mounted coated aluminum alloy dome tweeter

ICC™ component crossover with 10% (Tol) parts

Corrosion resistant gold plated polarized input terminals w/ a spare terminal set for optional additional tweeters

Removable Centrex® trim ring w/ 18 gauge corrosion resistant integrated/removable stainless steel grille and mounting hardware

Neodymium Ferrite magnet structure

Removable Semi-flexible Polyvinyl Chloride

Ferrite magnet structure

Ferrite magnet structure Ferrite magnet structure

Ferrite magnet structure

Injection molded 100% Ultraviolet stable Centrex®

*Specifications subject to change

Terminal Connectors

Cat 5 remote extension cable, grilles and mounting hardware

Crossover

3-way connection terminal

Tweeter

Single chassis stereo w/ audiophile 1% mil-spec components and dual micro-controller for intelligent protection w/ integrated/remote tuning module and RFLink™ equipped

Motor Cover

1"(25mm) Liquid Crystal Polymer Fiber ring radiator dome, dual neodymium magnets w/ IDHS™, low resonant chamber and DDC™

Motor Structure Multi-pole™ dual neodymium magnet w/ IDHS™