Email rocket rack® catalog

SANITARY SUPPORT SYSTEM FOR CONDUIT & PROCESS PIPE

MADE IN USA TM

www.rocket-rack.com 866.481.8899

sales@rocket-rack.com

PRODUCT CATALOG

The ROCKET RACK® Story The ROCKET RACK® System was designed & patented by Ron Meyer, a former IBEW (Local One) electrician working mainly in the food-processing industry. He was frustrated with the expensive and dangerous process of on-site rack fabrication.

"During one particularly fast-track project, I was fed up with the pipe-rack fabrication process. I'd been toying with the design for a prefabricated system – a pre-slotted rack with mounting holes at each end.

A slot would allow for repositioning of the conduit, creating precise alignment of the entire run. A machinist friend was able to turn out a batch on short notice. We completed the job in record time; our customer was thrilled. My Project Manager suggested I apply for a patent."

The company was formed shortly thereafter while Ron continued to work as an electrician. Julie Meyer, Ron's wife, headed the operation from home. The first patents came in 2009 with the introduction of the original products, the ROCKET RACK® Standard and Wall Mount and Coated Mounting Rod. Along the way a new product was designed – the ROCKET RACK® TentedTM (slot and mounting holes cut into the peak of the angle) resulting in a total of five patents.

Today ROCKET RACK® is used in food/beverage manufacturing facilities all over the U.S. Says Meyer, "Having been in the trade, working on the same kinds of projects that my customers are working, I know these guys need their materials fast. For that reason we keep a large inventory, so most orders ship same day. Our customers say they love our products. They're able to pass the value along to their customers."

The ROCKET RACK® System provides a smooth, sanitary way to install conduit or process pipe. Its patented slot design eliminates harborage points caused by recessed spaces and exposed threads.

It is infinitely reusable, as pipe and conduit can be placed anywhere along the slot. When re-tooling or re-configuring a plant layout, existing ROCKET RACK® racks can be disassembled and re-installed again and again, making it a sustainable component of your installation.

And, of course the safety aspects of a prefabricated system are immeasurable to the contractor.

ROCKET RACK® saves time and money and meets all standards set forth in the 2016 Food Safety Modernization Act.

Manufacturing the patented ROCKET RACK® Conduit & Pipe Support Racks without the permission of Unique Metal Solutions, LLC, (by license, waiver, or other contract) can constitute infringement and expose the unauthorized user AND manufacturer to liability under U.S. Patent Law. ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.

866.481.8899

Same Day Shipping on All Items Except Custom Parts

Information and Details

The items listed here are "in-stock/inventory" items. Orders placed by 10:00 a.m. CST for in-stock items usually will ship same-day. Stock Items may be returned but are subject to a 30% re-stocking fee.

Length (in inches) refers to overall length of the rack, NOT to the length of the slot. Please remember we can fabricate racks of most any length. Just let us know the center to center distance between mounting holes. Call for pricing and lead time on specially-fabricated racks (including 316 stainless material). Special Fabrication Items Are Final Sale: NO REFUNDS OR EXCHANGE.

Coated Mounting rod can be fabricated in diameters not listed here.

Before placing an order, we would encourage you to look at our website , www.rocket-rack.com, in order to be be familiar with the different varieties of the patented ROCKET RACK ® and to find more structural information under the “loadratings” tab. For information on slot length & placement, please contact our office at 866-481-8899.

Thank you for your interest in the patented ROCKET RACK ® SANITARY SUPPORT SYSTEM FOR CONDUIT & PROCESS PIPE. We look forward to working with you.

Manufacturing the patented ROCKET RACK® Conduit & Pipe Support Racks without the permission of Unique Metal Solutions, LLC, (by license, waiver, or other contract) can constitute infringement and expose the unauthorized user AND manufacturer to liability under U.S. Patent Law. ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.

866.481.8899

3

ROCKET RACK® 304 Stainless Steel Standard

Part #

Description

STD304.12

12” ROCKET RACK® Standard 304 Stainless | 2x2x1/4”

STD304.18

18” ROCKET RACK® Standard 304 Stainless | 2x2x1/4”

STD304.24

24” ROCKET RACK® Standard 304 Stainless | 2x2x1/4”

STD304.30

30” ROCKET RACK® Standard 304 Stainless | 2x2x1/4”

STD304.36

36” ROCKET RACK® Standard 304 Stainless | 2x2x1/4”

STD304.48

48” ROCKET RACK® Standard 304 Stainless | 2x2x1/4”

STD304.SO

Custom Length up to 72” | ROCKET RACK® Standard 304 SS

Hung trapeze style from ceiling of structure utilizing ROCKET RACK® Coated Mounting Rod. Slot and mounting holes cut in flat leg of angle.

Engineered to withstand heavy loads. Used to support process pipe & electrical conduit or cable tray. Patented slot design allows for additional lines to be installed in the future and assures a perfectly straight run. Pipe & conduit are secured with U-Bolts or other approved stand-off mounts.

Samples, Load Ratings & Slot Placement Details available upon request. Call for pricing and lead time on specially-fabricated racks (including 316 stainless material).

TentedTM TNT304.12

12” ROCKET RACK® TentedTM 304 Stainless | 2x2x1/4”

TNT304.18

18” ROCKET RACK® TentedTM 304 Stainless | 2x2x1/4”

TNT304.24

24” ROCKET RACK® TentedTM 304 Stainless | 2x2x1/4”

TNT304.30

30” ROCKET RACK® TentedTM 304 Stainless | 2x2x1/4”

TNT304.36

36” ROCKET RACK® TentedTM 304 Stainless | 2x2x1/4”

TNT304.48

48” ROCKET RACK® TentedTM 304 Stainless | 2x2x1/4”

TNT304.SO Special Mounting Hardware Included Specify whether using 1/2" or 3/8" mounting rod.

Flat

Custom Length up to 72” | ROCKET RACK® TentedTM 304 SS

Hung trapeze style from ceiling of structure utilizing ROCKET RACK® Coated Mounting Rod. Slot and mounting holes cut in peak or heel of angle. Engineered to withstand heavy loads. Used to support process pipe & electrical conduit or cable tray. Patented hygienic design features sloped sides (45°) to eliminate a horizontal ledge where grime can accumulate. Supplied with 304 SS specialty mounting hardware that perfectly couples the Coated Mounting Rod with the rack, leaving no gaps or crevices. Patented slot design allows for additional lines to be installed in the future and assures a perfectly straight run. Pipe & conduit are secured with U-Bolts or other approved stand-off mounts. Samples, Load Ratings & Slot Placement Details available upon request. Call for pricing and lead time on specially-fabricated racks (including 316 stainless material).

FLT304.12

12” ROCKET RACK® Flat 304 Stainless | WALL MOUNT | 2x1/4”

FLT304.18

18” ROCKET RACK® Flat 304 Stainless | WALL MOUNT | 2x1/4”

FLT304.24

24” ROCKET RACK® Flat 304 Stainless | WALL MOUNT | 2x1/4”

FLT304.30

30” ROCKET RACK® Flat 304 Stainless | WALL MOUNT | 2x1/4”

FLT304.36

36” ROCKET RACK® Flat 304 Stainless | WALL MOUNT | 2x1/4”

FLT304.48

48” ROCKET RACK® Flat 304 Stainless | WALL MOUNT | 2x1/4”

FLT304.SO

Custom Length up to 72” | ROCKET RACK® Flat 304 SS

FOR WALL/POST MOUNT ONLY. Mounted off the wall several inches using Coated Mounting Rod for easy access during cleaning. Used for vertical or horizontal pipe runs down the wall (or in conjunction with our Post Mount System). Patented slot design allows for additional lines to be installed in the future and assures a perfectly straight run. Pipe & conduit are secured with U-Bolts or other approved stand-off mounts.

Samples & Slot Placement Details available upon request. Call for pricing and lead time on specially-fabricated racks (including 316 stainless material).

Manufacturing the patented ROCKET RACK® Conduit & Pipe Support Racks without the permission of Unique Metal Solutions, LLC, (by license, waiver, or other contract) can constitute infringement and expose the unauthorized user AND manufacturer to liability under U.S. Patent Law. ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.

866.481.8899

4

Same Day Shipping on All Items Except Custom Parts Standard

ROCKET RACK® Aluminum Part #

Description

STDALU.12

12” ROCKET RACK® Standard Aluminum | 2x2x1/4”

STDALU.18

18” ROCKET RACK® Standard Aluminum | 2x2x1/4”

STDALU.24

24” ROCKET RACK® Standard Aluminum | 2x2x1/4”

STDALU.30

30” ROCKET RACK® Standard Aluminum | 2x2x1/4”

STDALU.36

36” ROCKET RACK® Standard Aluminum | 2x2x1/4”

STDALU.48

48” ROCKET RACK® Standard Aluminum | 2x2x1/4”

STDALU.SO

Custom Length up to 72” | ROCKET RACK® Standard Aluminum

Hung trapeze style from ceiling of structure utilizing ROCKET RACK® Coated Mounting Rod. Slot and mounting holes cut in flat leg of angle.

Engineered to withstand heavy loads. Used to support process pipe & electrical conduit or cable tray. Patented slot design allows for additional lines to be installed in the future and assures a perfectly straight run. Pipe & conduit are secured with U-Bolts or other approved stand-off mounts.

Samples, Load Ratings & Slot Placement Details available upon request. Call for pricing and lead time on specially-fabricated racks.

TentedTM

Special Mounting Hardware Included Specify whether using 1/2" or 3/8" mounting rod.

TNTALU.12

12” ROCKET RACK® TentedTM Aluminum | 2x2x1/4”

TNTALU.18

18” ROCKET RACK® TentedTM Aluminum | 2x2x1/4”

TNTALU.24

24” ROCKET RACK® TentedTM Aluminum | 2x2x1/4”

TNTALU.30

30” ROCKET RACK® TentedTM Aluminum | 2x2x1/4”

TNTALU.36

36” ROCKET RACK® TentedTM Aluminum | 2x2x1/4”

TNTALU.48

48” ROCKET RACK® TentedTM Aluminum | 2x2x1/4”

TNTALU.SO

Custom Length up to 72” | ROCKET RACK® TentedTM Aluminum

Hung trapeze style from ceiling of structure utilizing ROCKET RACK® Coated Mounting Rod. Slot and mounting holes cut in peak or heel of angle.

Engineered to withstand heavy loads. Used to support process pipe & electrical conduit or cable tray. Patented hygienic design features sloped sides (45°) to eliminate a horizontal ledge where grime can accumulate. Supplied with 304 SS specialty mounting hardware that perfectly couples the Coated Mounting Rod with the rack, leaving no gaps or crevices. Patented slot design allows for additional lines to be installed in the future and assures a perfectly straight run. Pipe & conduit are secured with U-Bolts or other approved stand-off mounts. Samples, Load Ratings & Slot Placement Details available upon request. Call for pricing and lead time on specially-fabricated racks.

Flat FLTALU.12

12” ROCKET RACK® Flat Aluminum | WALL MOUNT | 2x1/4”

FLTALU.18

18” ROCKET RACK® Flat Aluminum | WALL MOUNT | 2x1/4”

FLTALU.24

24” ROCKET RACK® Flat Aluminum | WALL MOUNT | 2x1/4”

FLTALU.30

30” ROCKET RACK® Flat Aluminum | WALL MOUNT | 2x1/4”

FLTALU.36

36” ROCKET RACK® Flat Aluminum | WALL MOUNT | 2x1/4”

FLTALU.48

48” ROCKET RACK® Flat Aluminum | WALL MOUNT | 2x1/4”

FLTALU.SO

Custom Length up to 72” | ROCKET RACK® Flat Aluminum

FOR WALL/POST MOUNT ONLY. Mounted off the wall several inches using Coated Mounting Rod for easy access during cleaning. Used for vertical or horizontal pipe runs down the wall (or in conjunction with our Post Mount System). Patented slot design allows for additional lines to be installed in the future and assures a perfectly straight run. Pipe & conduit are secured with U-Bolts or other approved stand-off mounts. Samples & Slot Placement Details available upon request. Call for pricing and lead time on specially-fabricated racks.

Manufacturing the patented ROCKET RACK® Conduit & Pipe Support Racks without the permission of Unique Metal Solutions, LLC, (by license, waiver, or other contract) can constitute infringement and expose the unauthorized user AND manufacturer to liability under U.S. Patent Law. ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.

866.481.8899

5

ROCKET RACK® Coated Mounting Rod Part #

Zinc-Plated Rod

Description

PVCZNC.06.1/4

1/4” Zinc-Plated Coated Mounting Rod, 6 ft. length

PVCZNC.06.3/8

3/8” Zinc-Plated Coated Mounting Rod, 6 ft. length

PVCZNC.06.1/2

1/2” Zinc-Plated Coated Mounting Rod Rod, 6 ft. length

PVCZNC.06.5/8

5/8” Zinc-Plated Coated Mounting Rod, 6 ft. length

PVCZNC.06.3/4

3/4” Zinc-Plated Coated Mounting Rod, 6 ft. length

PVCZNC.06.SO

Special Order Zinc-Plated Rod, 6 ft. length

PVCZNC.12.3/8

3/8” Zinc-Plated Coated Mounting Rod, 12 ft. length

PVCZNC.12.1/2

1/2” Zinc-Plated Coated Mounting Rod, 12 ft. length

PVCZNC.12.SO

Special Order Zinc-Plated Rod, 12 ft. length

Heat-Shrink Coating is applied to 304SS or zinc-plated all-thread rod. Coating is snug and tight on the rod with no exposed threads.

Installer peels away a small strip of the coating to reveal precisely the number of threads needed to install hardware. Used for installing ROCKET RACK® trapeze style or against the wall. Call for pricing and lead time on rod sizes not listed above.

304 Stainless Rod PVC304.06.1/4

1/4” 304 Stainless Coated Mounting Rod, 6 ft. length

PVC304.06.3/8

3/8” 304 Stainless Coated Mounting Rod, 6 ft. length

PVC304.06.1/2

1/2” 304 Stainless Coated Mounting Rod, 6 ft. length

PVC304.06.5/8

5/8” 304 Stainless Coated Mounting Rod, 6 ft. length

PVC304.06.3/4

3/4” 304 Stainless Coated Mounting Rod, 6 ft. length

PVC304.06.SO

Special Order 304 Stainless Rod, 6 ft. length

PVC304.12.3/8

3/8” 304 Stainless Coated Mounting Rod, 12 ft. length

PVC304.12.1/2

1/2” 304 Stainless Coated Mounting Rod, 12 ft. length

PVC304.12.SO

Special Order 304 Stainless Rod, 12 ft. length

Heat-Shrink Coating is applied to 304SS or zinc-plated all-thread rod. Coating is snug and tight on the rod with no exposed threads. Installer peels away a small strip of the coating to reveal precisely the number of threads needed to install hardware. Used for installing ROCKET RACK® trapeze style or against the wall. Call for pricing and lead time on rod sizes not listed above (including 316 stainless material).

304 SS Bald Rod BROD304.06.3/8

3/8” 304 Stainless Steel Bald/Slick Rod, 6 ft. length

BROD304.06.1/2

1/2” 304 Stainless Steel Bald/Slick Rod, 6 ft. length

BROD304.12.3/8

3/8” 304 Stainless Steel Bald/Slick Rod, 12 ft. length

BROD304.12.1/2

1/2” 304 Stainless Steel Bald/Slick Rod, 12 ft. length

BROD304.SO

Special Order 304 Stainless Steel Bald/Slick Rod

Our “Bald” or “Slick” Rod, also known as Round Bar or Round Stock, is a smooth piece of 304 SS rod that has no threads. This is used as an alternative to ROCKET RACK® Coated Mounting Rod. It is stocked in 6 ft. and 12 ft. lengths, in 3/8” and 1/2” diameters. Call for pricing and lead time on rod sizes not listed above (including 316 stainless material).

Manufacturing the patented ROCKET RACK® Conduit & Pipe Support Racks without the permission of Unique Metal Solutions, LLC, (by license, waiver, or other contract) can constitute infringement and expose the unauthorized user AND manufacturer to liability under U.S. Patent Law. ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.

866.481.8899

6

ROCKET RACK® U-Bolts and Hardware

Same Day Shipping on All Items Except Custom Parts 304 Stainless U-Bolts and Hardware

Part #

Description 3/4” Rigid U-Bolt, 304 Stainless Steel 1” Rigid U-Bolt, 304 Stainless Steel

HDWS.UB.3/4” HDWS.UB.1” HDWS.UB.1_1/4”

1 1/4” Rigid U-Bolt, 304 Stainless Steel

HDWS.UB.1_1/2”

1 1/2” Rigid U-Bolt, 304 Stainless Steel 2” Rigid U-Bolt, 304 Stainless Steel

HDWS.UB.2” HDWS.UB.2_1/2” HDWS.UB.3”

2 1/2” Rigid U-Bolt, 304 Stainless Steel 3” Rigid U-Bolt, 304 Stainless Steel

HDWS.UB.3_1/2”

3 1/2” Rigid U-Bolt, 304 Stainless Steel 4” Rigid U-Bolt, 304 Stainless Steel Special Order Rigid U-Bolt, 304 Stainless Steel

HDWS.UB.4” HDWS.UB.SO” HDWS.RODCOUP.3/8

3/8" Rod Coupling, Stainless Steel 1/2" Rod Coupling, Stainless Steel

HDWS.RODCOUP.1/2 HDWS.UBNUT.3/8

3/8" Nylock Flange Nut, Stainless Steel

HDWS.BEVNUT.3/8

3/8" Beveled Nylock Nut, Stainless Steel

HDWS.BEVNUT.1/2

1/2" Beveled Nylock Nut, Stainless Steel

All ROCKET RACK® U-Bolts are 304 Stainless Steel with 1 1/8" Thread length, 3/8" Diameter. One pair of stainless steel Nylock flange nuts are included in price. Call for pricing and lead time on additional size U-Bolts and Hardware (including 316 stainless material).

Ask about our specialty hardware for mounting Sanitary Split-Ring clamps to all varieties of the ROCKET RACK®

Manufacturing the patented ROCKET RACK® Conduit & Pipe Support Racks without the permission of Unique Metal Solutions, LLC, (by license, waiver, or other contract) can constitute infringement and expose the unauthorized user AND manufacturer to liability under U.S. Patent Law. ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.

866.481.8899

7

ROCKET RACK® Post Mounts and Modified TentedTM Racks ROCKET RACK® Post Mounts are sold individually. These Posts can be used to run conduit and process pipe vertically or horizontally using our Flat ROCKET RACKS® or Modified TentedTM ROCKET RACKS® respectively. Post Mounts and Modified TentedTM Racks are special order items with a 7-10 day lead time.

Part #

Fig. A

Fig. B

Description

POSTM.304.48

One Post Mount, 304 SS 2” Pipe, 4 ft. length

POSTM.304.60

One Post Mount, 304 SS 2” Pipe, 5 ft. length

POSTM.304.72

One Post Mount, 304 SS 2” Pipe, 6 ft. length

POSTM.304.78

One Post Mount, 304 SS 2” Pipe, 6.5 ft. length

POSTM.304.84

One Post Mount, 304 SS 2” Pipe, 7 ft. length

POSTM.304.96

One Post Mount, 304 SS 2” Pipe, 8 ft. length

POSTM.304.108

One Post Mount, 304 SS 2” Pipe, 9 ft. length

POSTM.304.120

One Post Mount, 304 SS 2” Pipe, 10 ft. length

POSTM.304.SO

One Custom Length Post Mount, 304 SS 2” Pipe

Figure A shows Flat ROCKET RACKS® affixed to two ROCKET RACK® Post Mounts using Stainless Steel U-Bolts to create a vertical mounting system. This system is a quick and versatile way to attach disconnects, operator interface panels, or mechanical devices such as water flow meters and valves or solenoid valves. Conduit can also be run vertically in instances when it cannot be attached to a wall or other partition. In both height and width, it can be tailored to the specifications of your customer's project. Flat ROCKET RACKS® and U-Bolts sold separately (pages 4-5 and 7, respectively). Call for pricing and lead time on specially fabricated posts. (including 316 stainless material).

TNT304.MOD.12

12” ROCKET RACK® Modified TentedTM 304 Stainless

TNT304.MOD.18

18” ROCKET RACK® Modified TentedTM 304 Stainless

TNT304.MOD.24

24” ROCKET RACK® Modified TentedTM 304 Stainless

TNT304.MOD.30

30” ROCKET RACK® Modified TentedTM 304 Stainless

TNT304.MOD.36

36” ROCKET RACK® Modified TentedTM 304 Stainless

TNT304.MOD.48

48” ROCKET RACK® Modified TentedTM 304 Stainless

TNT304.MOD.SO

Special Order ROCKET RACK® Modified TentedTM 304 Stainless

Figure B shows MODIFIED TentedTM ROCKET RACKS® affixed to ROCKET RACK® Post Mounts. The Modified TentedTM Racks are fabricated with the slot in the peak of the angle but with no mounting holes or hardware. They are welded to a plate with holes perfectly spaced for use with a 2” Stainless Steel U-Bolt. The ROCKET RACK® Sanitary Post Mount System is used in instances requiring horizontal pipe runs along equipment where there is no wall space to attach to, or where wall-mount is unfeasible.

It provides a quick and sanitary installation that allows for fine adjustments and adding piping runs without any drilling or welding in the field. ROCKET RACKS® Modifed TentedTM and U-Bolts sold separately (table above and page 7, respectively). Call for pricing and lead time on specially-fabricated racks (including 316 stainless material).

Manufacturing the patented ROCKET RACK® Conduit & Pipe Support Racks without the permission of Unique Metal Solutions, LLC, (by license, waiver, or other contract) can constitute infringement and expose the unauthorized user AND manufacturer to liability under U.S. Patent Law. ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.

866.481.8899

8

Same Day Shipping on All Items Except Custom Parts

Example Installation ROCKET RACK® Post Mount Systems

Fig. A

Figure A shows two ROCKET RACK® Post Mounts that are spanned by ROCKET RACK® Flat. In this example the system is supporting a disconnect, and the conudit runs vertically.

Fig. B

Figure B shows four ROCKET RACK® Post Mounts, each pair being spanned by ROCKET RACK® Modified TentedTM. The photograph shows how conduit and cable tray can be run horizontally without the need for an attachment point such as a wall.

Manufacturing the patented ROCKET RACK® Conduit & Pipe Support Racks without the permission of Unique Metal Solutions, LLC, (by license, waiver, or other contract) can constitute infringement and expose the unauthorized user AND manufacturer to liability under U.S. Patent Law. ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.

866.481.8899

9

SANITARY SUPPORT SYSTEM FOR CONDUIT & PROCESS PIPE

THESE MAJOR FOOD MANUFACTURERS HAVE DISCOVERED WHY ROCKET RACK® IS FASTER, CLEANER & SAFER

Manufacturing the patented ROCKET RACK® Conduit & Pipe Support Racks without the permission of Unique Metal Solutions, LLC, (by license, waiver, or other contract) can constitute infringement and expose the unauthorized user AND manufacturer to liability under U.S. Patent Law. ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.

866.481.8899

10

Same Day Shipping on All Items Except Custom Parts

ROCKET RACK速 Contact Information Please call - we'd like to hear from you.

Julie Meyer Owner

Julie@rocket-rack.com Office: 636.742.5272 Toll Free: 866.481.8899 Cell: 314.808.0460

Maria Marrs

Ron Meyer

Business Manager

Sales Director

Maria@rocket-rack.com Office: 636.742.5272 Toll Free: 866.481.8899 Cell: 636.667.8358

Ron@rocket-rack.com Office: 636.742.5272 Toll Free: 866.481.8899 Cell: 636.402.8381

We take pride in quickly and efficiently responding to requests for information and material. Our capabilities and experience can help you find solutions to your installation problems. Give us a call and we will work together to design a ROCKET RACK速 system that works for you.

2751 Highway 100 P.O. Box 133 Gray Summit, MO, 63039

Manufacturing the patented ROCKET RACK速 Conduit & Pipe Support Racks without the permission of Unique Metal Solutions, LLC, (by license, waiver, or other contract) can constitute infringement and expose the unauthorized user AND manufacturer to liability under U.S. Patent Law. ROCKET RACK速 U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.

866.481.8899

11

TENTED ROCKET RACK®

STANDARD ROCKET RACK®

TentedTM Angle is fabricated with the slot and mounting holes cut on the heel of the angle. TentedTM Angle ROCKET RACK® is supplied with specially-designed stainless mounting hardware that leaves no gaps or spaces between the rack and mounting rod.

Standard Angle is fabricated with the slot and mounting holes cut on the horizontal leg of the angle.

FLAT ROCKET RACK®

Coated Mounting Rod

Flat Stock is used with our coated mounting rod for positioning horizontal or vertical wall-mount conduit.

It can also be used to secure equipment or disconnects to our Post Mounts. FLAT STOCK IS FOR WALL OR POST

ROCKET RACK’S® PVC Coated mounting rod – in either stainless steel or zinc – is available in ¼” – 1” diameters and 6ft. or 12ft. lengths.

MOUNT APPLICATIONS ONLY. NEVER HANG FLAT STOCK TRAPEZE STYLE.

• All Products fabricated in USA • Racks are available in 304 Stainless or 6061-T6 Aluminum • PVC Coated rod available in 304 Stainless or Zinc Plated Simply cut your mounting rod to length, cut and peel back the PVC coating to reveal the appropriate amount of threads, and your ROCKET RACK® is ready to install. ROCKET RACK® really is FASTER, CLEANER, SAFER™.

Manufacturing the patented ROCKET RACK® Conduit & Pipe Support Racks without the permission of Unique Metal Solutions, LLC, (by license, waiver, or other contract) can constitute infringement and expose the unauthorized user AND manufacturer to liability under U.S. Patent Law. ROCKET RACK® U.S. Patents: D608,183 S, D599,194 S, D599,193 S, D653,524 S & D649,863 S and patents pending.