Pochin is an established plumbing and heating supplies distributor with branches and bathroom showrooms across the Midlands. It has been over 160 years since we opened our first branch in Leicester (the American Civil War was happening at the time!).
Our Plumbing & Heating collection contains a full range of plumbing and heating products for your to browse and find what you need for your jobs. You will find sections including heating, water treatment, controls, consumables and renewables.
Our branches usually display a limited amount of Instinct products as well (but please contact before visiting to avoid disappointment).
Get all our latest branch information at pochin.com/branches or scan the QR code below for branch details
Your Home for Renewable Products
Heat Pump Installer Packs
Everything you need to complete the job
Heat Pump Filters
Improve efficiency, safeguard heat pumps and low-temperature systems, and prolong their lifespan
Anti-Freeze Valves
Keep the system running smoothly in cold weather
Ancillaries
Boost performance and simplify installation with key supporting products
Heat Pump Filters
filter forces fluid through the mesh cartridge before entering the filter chamber to catch as much system debris as possible
IntaKlean 35mm Filter Data Sheets, Installation Instructions + Maintenance
IntaKlean 35mm Magnetic Air Source Heat Pump Filter (with 28mm Reducing Sets)
The IntaKlean HP XL features a more efficient direct filtration design with higher flow rates, built-in isolation and greater flexibility for the installer.
The direct filter forces the fluid across the mesh of the filter before entering the filter chamber. In this chamber, the mesh cartridge and strong neodymium magnet help to capture and breakdown the magnetite and non-ferrous debris from the system.
The gravitational force pulls the non-ferrous debris to the base of the pot, allowing it to be easily drained while any air passing through the filter floats to the top, where the manual air vent can purge it from the system.
Features + Benefits
Actively filters magnetite and non-ferrous system debris
Extends the lifespan of heat pumps
Fights corrosion, ensures system efficiency
Suitable for water or water + glycol (Maximum 50% glycol)
90°C maximum temperature (One Hour Max)
0°C to +70°C operating temperature
6 Bar maximum working pressure
3 Bar maximum pressure during maintenance
300 μm degree of filtration
11,000 Gauss magnet strength
Kv Value (35mm Only) – 17.3 m³/h
Finish – Black Dimensions – 285(h) x 230(w) x 100(d) mm
IntaKlean 28mm Filter Data Sheets, Installation Instructions + Maintenance
IntaKlean 28mm Magnetic Air Source Heat Pump Filter
The IntaKlean HP Magnetic air source heat pump filter, featuring Inta’s unique direct multi-layered non-ferrous fine filter.
This is the ideal solution to prevent costly and unnecessary system breakdowns caused by both magnetic and non-ferrous particulates in air source heat pump systems. As well as separating magnetic debris and trapped air in circulating system fluid, IntaKlean HP also includes a completely unique direct filter which contains a multilayered stainless steel 300-micron fine gauze.
The system debris is forced directly into the filter, breaking down the debris, which then precipitates to the base of the pot.
The remaining magnetic debris is drawn to the centre of the filter and captured by 11,000-gauss rare earth neodymium magnet.
Features + Benefits
Actively filters magnetite and non-ferrous system debris
Low-profile drain valve
360° rotation for ease of servicing
Suitable for water or water + glycol (Maximum 50% glycol)
90°C maximum temperature (One Hour Max)
4 Bar maximum working pressure
300μm + 800μm degree of filtration
11,000 Gauss magnet strength
Kv Value (35mm Only) – 8.27 m³/h
Finish – Grey
Dimensions – 271(h) x 90(w) x 182(d) mm
removable 11,000 gauss magnet – service the system live
Unique direct non-ferrous system filter forces system debris directly into the filter core to capture as much system debris as possible
Multi-layered filter incorporating a 300-micron fine particle filter and a 800-micron mesh filter
Low profile drain
Heat Pump Filters
new
Chemicals can be easily dosed directly into the
Adey MagnaClean HP® Filter
– Heat Pump + Low-Temperature System Protection
MagnaClean HP is a filter that has been designed specifically to protect heat pumps and low-temperature heating systems from both magnetic and non-magnetic debris, keeping them working as efficiently as possible, for as long as possible. Low temperature heating systems, like those with heat pumps, are the perfect breeding ground for bacterial growth, which can clog them up, reducing efficiencies and ultimately causing breakdown.
Thanks to MagnaClean HP’s high-quality build, powerful magnet, stainless steel gauze and non-blocking design, you can rest assured that you are fitting a filter that will efficiently protect systems and will stand the test of time.
Features + Benefits
Specially designed to protect heat pump and low temperature systems
Protects heat pumps from magnetic and non-magnetic debris
Large canister ports, available for 28mm systems
Non-blocking design for optimum flow, even when the filter is full, keeping the system working as efficiently as possible
+3°C to +95°C operating temperature
6 Bar maximum working pressure
80 L/min (5m3/h) maximum flow rate
Extended system life of up to 7 years*
Finish – Black
Dimensions – 251(h) x 115(w) x 235(d) mm FL1-03-06223
Large canister ports, available for 28mm systems
Valves enable high flow rates and minimise pressure drops
Adey MagnaClean HP® Filter
Take a closer look at the Adey MagnaClean HP® feature video
Dedicated magnetic and non-magnetic capture allows both types of debris to be captured before it enters the system
canister
Reduces CO2 emissions by up to 250kg per year*
Heat Pump Filters
Filter does not restrict flow, even at high flow rates
Award Winning Design – HVN News Awards for ‘Domestic Heating Product of the Year'
Convenient to clean and quick to service
Capture Rate – Up to 100% of system contaminates
Fernox TF1 Sigma HP Filter
The TF1 Sigma HP Filter efficiently removes all types of debris from renewable heating systems using patent pending technology.
The innovative TF1 Sigma HP Filter does not restrict flow, even at high flow rates, and will not block, ensuring the COP (co-efficient of performance) of the system is maintained thereby reducing energy consumption and fuel wastage. Simple and fast to install, the TF1 Sigma HP Filter is supplied with full bore valves as standard, which results in improved system performance, and greater energy efficiency.
Features + Benefits
Specifically designed for Air and Ground Source Heat Pump systems
Filter is extremely effective at high flow rates and across a range of debris types to ensure the system remains free of contaminants
Constructed from a high-quality glass reinforced engineering polymer with brass full bore valves as standard
Suitable for water or water + glycol (Maximum 50% glycol)
100°C maximum working temperature
5 Bar maximum working pressure
80 L/min maximum flow rate
Finish – Black
Dimensions – 346(h) x 90(w) x 179(d) mm
a closer look at
Premium brass, full bore isolation valves supplied as standard –allows high flow rates
Simple and fast to install
Flexible installation - fits horizontal and vertical pipework
Take
the Fernox TF1 Sigma HP Filter feature video
Anti-Freeze Valves
Inta Zero Videos, Data Sheets, Installation Instructions + Maintenance
A unique protective cover, designed to protect the anti-vacuum valve on the Inta Zero Anti-Freeze Valves
new
Prevents breakdowns and costly damage to the air source heat pump
Chamfered edge at the discharge point to prevent freezing Wax element cartridge is placed directly into the water flow for accurate reading of water temperature
Allows Anti-Freeze valves to be positioned inline when fitted on the flow and return connections
Serviceable gauze filter to prevent debris and insects finding their way into the cover
Inta Zero
– The most reliable anti-freeze valve
Inta Zero Anti-Freeze Valves have been specifically designed to quickly and accurately react to the water temperature in the heat pump circuit and do not need the influence of the ambient temperature to operate.
Preventing the influence of ambient temperatures
The Inta Zero has been designed and engineered to avoid negative influences from low ambient temperatures by directly positioning the element in the system water flow, permitting accurate system discharge only when it is truly needed.
Protection from system debris
A protective ring has been included in the construction to prevent system debris from clogging the operation of the valve.
Operating when needed
Double O-rings and reduced surface friction treatment on the operating member also ensure correct operation and reliability even after years of non-movement.
Features + Benefits
10 Bar maximum inlet pressure (Static)
Suitable for water
±1°C Sensitivity
+3°C opening temperature, +4°C closing temperature
Building regulations Part L states that all external pipework on an Air Source Heat Pump System should be fully insulated to reduce heat loss and maintain system efficiency. Inta Zero Anti-Freeze Valves will maintain correct operation and discharge the water at the same temperature even when a system is correctly insulated.
Fully Insulated
The Inta Zero’s thermostatic element sits directly in the system’s water flow, allowing it to accurately react to the temperature of the system, regardless of ambient temperature. This means the Inta Zero can be fully insulated to help maintain the COP and SCOP of your system without affecting the operation.
1¼"
Years on Fernox Anti-Freeze Valves Years on Bastion Anti-Freeze Valves
Take a closer look at the Fernox Anti-Freeze Valve feature video
Enhanced energy efficiency
UV and Weatherproof material for externally fitted Anti-Freeze Valves
Fernox Anti-Freeze Valves
Fernox Anti-Freeze Valve Thermal Cover
The Fernox Anti-Freeze Valve is specifically designed to protect water-based air source Heat Pump heating systems. In cold weather when temperatures drop, systems that are not treated with a glycol-based fluid can freeze within the heat pump circuit potentially causing harmful and costly damage to vulnerable heat pump components and system pipework; eventually causing premature breakdown and repair.
The Fernox Anti-Freeze Valve is an essential, simple to install component developed to prevent frozen systems by detecting when the fluid in the circuit is close to freezing point i.e., when the circuit temperature reaches below 3°C. The Anti-Freeze Valve will automatically open and release system water, preventing ice from forming within the Heat Pump system and safeguarding the operation of the system.
Features + Benefits
10 Bar maximum inlet pressure (Static)
Suitable for water
±1°C Sensitivity
+3°C opening temperature, +4°C closing temperature
0°C to +75°C working temperature range
-30°C to +60°C ambient temperature range
Kv Value – 23.1 m³/h
Anti-Freeze Valves
Anti-Freeze valves prevents ice forming in the circuit of a system, avoiding potential damage to the heat pump and to the pipes
Water sensor cartridge –An automatic shut-off cock prevents water from draining while the cartridge is being replaced, thereby maintaining system pressure
Bastion Anti-Freeze Valves
The Anti-Freeze valve allows the circuit medium to be drained when its temperature reaches an average value of 3°C. This prevents ice forming in the circuit of a system, generally with a heat pump, avoiding potential damage to the machine and to the pipes. The version with the air sensor allows the system to work in cooling mode, even when the water temperature is approaching 3°C. In these conditions the air sensor cuts in to prevent water drainage.
Features + Benefits
10 Bar maximum inlet pressure (Static)
Suitable for water
±1°C Sensitivity
+3°C opening temperature, +4°C closing temperature
0°C to +65°C working temperature range
-30°C to +60°C ambient temperature range
Kv Value – 55 m³/h
ZL-7201-1M
ZL-7201-11/2M
ZL-7201-11/4M
ZL-7201-11/4MF
ZL-7201-1MF
ZL-7201-28MM
ZL-7207-28MM
Anti-Freeze Valve 1”
Anti-Freeze Valve 1½”
Anti-Freeze Valve 1¼”
Anti-Freeze Valve 1¼’’ (Male to Female Swivel)
Anti-Freeze Valve 1’’ (Male to Female Swivel)
Anti-Freeze Valve 28mm
Anti-Freeze Valve 28mm (off side)
Fernox Anti-Freeze Valve 1¼”
Tailored fit
Ball Valves
new
Supplied with an adjustment tool
Inta K-Type 1” Female Swivel x 1” Male Flat Face Extended Ball Valve
Inta K-Type Extended External Ball Valves
The Inta extended external ball valve provides easy connections between the heat pump, flexible hose, Anti-Freeze valve (if fitted) and the heating system.
The extended stem allows the insulation to be sealed, which will not be broken when operating the valve.
Rotation of stem limited to 90˚ (open to closed), supplied individually to suit the flow or return of the heat pump system. It is recommended that a valve is installed on both flow and return pipework.
Features + Benefits
Solid brass construction
Pressure rating of PN25
Variety of connections to suit all installations
Fixed key type adjuster allows the ball valve to be fully insulated without affecting its operation
Supplied with an adjustment tool and a dust cover to protect the adjuster
ISO228 threads
25 Bar maximum inlet pressure (Static)
-10°C to +90°C operating temperature
-20°C to +120°C temperature range
Kv Value – 66m³/h (HPBV11, HPBV114, HPBV28), 80m³/h (HPBV114X2, HBPV35)
HPBV11 Inta K-Type1” Female Swivel x 1” Male Flat Face Extended Ball Valve
HPBV114 Inta K-Type1¼” Female Swivel x 1” Male Flat Face Extended Ball Valve HPBV114X2 Inta K-Type 1¼” Female Swivel x 1¼” Male Flat Face Extended Ball Valve
Reduces system noise and maintains an even system pressure
Ideal for sealed systems to protect pumps when zone valves close
10 Bar maximum inlet pressure (Dynamic)
100°C maximum inlet temperature
1 to 5m³/hour flow capacity
0.1 to 0.5 Bar differential pressure range
ZL-8009B
ZL-8010B
Bastion Angled By-Pass Valves
Bastion Straight By-Pass Valves
Bastion Y-Pattern Strainers
Features + Benefits
Easy integration with UFH systems
Exceptional durability and resistance to corrosion
Ideal for prolonged use in harsh environments
10 Bar maximum pressure (Static)
100°C maximum operating temperature
ZL-7113C-22
ZL-7113C-28
Bastion 22mm Y-Pattern Strainer (with Magnetic Filter)
Bastion 28mm Y-Pattern Strainer (with Magnetic Filter)
Hoses
Rob Pond PVC External Insulation Tape
Features + Benefits
Seals PVC coated insulation joints and seams
Excellent weather and UV resistance
Strong adhesion
Rob Pond Flexible Connection Hoses
Rob Pond Flexible Connection Hoses
Pre insulated with a durable 19mm thick PVC coating that resists weather and UV rays these flexible hoses simplify connecting flow and return pipes to heat pumps and biomass boilers. These hoses dampen vibrations and enable smooth bends during installation. They feature a 28mm inner hose encased in a protective stainless-steel braid.
For easy connection, one end has a male or female BSP thread, while the other uses a 28mm compression fitting.
Features + Benefits
Available in 300mm, 500mm and 750mm lengths
Hose
Suitable for Water + Glycol up to 50% 28mm bore stainless steel braided inner hoses
10 Bar maximum inlet pressure (Static)
90°C maximum inlet temperature
Insulation
19mm wall thickness PVC coated insulation that resists weather and UV resistant
-40°C to +110°C insulation temperature range
0.035 W/mk insulation thermal conductivity
μ ≥ 15,000 water vapour resistance
Kit
2 x PVC coated flexi hoses
2 x PVC tape strips
2 x rubber washes
Guarantees
Year on DiversiTech Hoses
FH-500-28-F Straight Hose
FH-300-28 -F-ELBOW Elbow Hose
DiversiTech Flexible Connection Hoses
DiversiTech Flexible Connection Hoses
Pre insulated with external grade PVC coated 19mm thick insulation these flexible hoses help to avoid transmission of vibration in the pipe work and allow for a smooth bend when connecting the flow and return pipe to the heat pump.
Features + Benefits
Available in 300mm, 500mm and 750mm lengths
Hose
Suitable for Water + Glycol up to 60%
20mm bore stainless steel braided inner hoses
One end has 28mm compression fitting, the other end BSP female threaded
10 Bar maximum inlet pressure (Static)
85°C maximum inlet temperature
Insulation
19mm wall thickness PVC coated insulation that resists weather and UV resistant
Additional 80mm of insulation to cover the connectors
-50°C to +110°C insulation temperature range
0.036 W/mk insulation thermal conductivity
μ ≥ 10,000 water vapour resistance
Kit
2 x PVC coated flexi hoses
2 x Insulation
Hoses new
Inta Flexible Hoses Data Sheets, Installation Instructions + Maintenance
Inta Flexible Connection Hoses
Inta Flexible Connection Hoses
Building regulations Part L states that all external pipework on an air source heat pump system should be fully insulated to reduce heat loss and maintain system efficiency.
In systems where every watt counts, Inta’s pre-insulated hoses have been designed for external use to prevent heat losses and to help maintain the COP and SCOP of the system, preventing losses of energy, contributing to an efficient system and preventing higher costs to run than expected.
Features + Benefits
Available in 300mm, 500mm and 750mm lengths
Pre-insulated to reduce system heat loss preserving system efficiency
Can be fit directly to the heat pump
Available in different sizes and styles to suit a variety of heat pump installations
Supplied in pairs to suit the flow and return
Supplied with an additional piece of insulation to cover connections
The Primary Pro insulation is waterproof and UV resistant, making it suitable for all weather conditions
For external use only
Hose
Suitable for Water, Water + Glycol up to 50%
Stainless steel braided inner hoses
10 Bar maximum inlet pressure (Static)
90°C maximum inlet temperature
Insulation
19mm wall thickness with Primary Pro’s water and UV resistant insulation
Insulation material – Treated Closed Cell Polyethylene
Additional piece of insulation provided to insulate the connectors
-45°C to +105°C insulation temperature range
0.034 W/mk insulation thermal conductivity
μ ≥ 39,300 water vapour resistance
Kit
2 x Stainless Steel Braided Flexible Hoses
2 x Pre-fit Hose Insulation
2 x Rubber Washer
1 x Additional Piece Insulation
HPHOSE300B Angled Hose
HPHOSE300 Straight Hose
Guarantees
Year on Altecnic Hoses
Hoses
Altecnic Flexible Connection Hoses
Features + Benefits
Available in 300mm, 500mm and 750mm lengths
Hose
Suitable for Water, Water + Glycol up to 40%
28mm bore stainless steel braided inner hoses
For easy connection one end has female BSP thread whilst other end has 28mm or 35mm compression fitting
10 Bar maximum inlet pressure (Static)
90°C maximum inlet temperature
Insulation
19mm wall thickness insulation that resists weather and is UV resistant
Insulation material – Aeroflex HF
Additional piece of insulation provided to insulate the connectors
-50°C to +125°C insulation temperature range
0.04 W/mk insulation thermal conductivity
μ ≥ 3000 water vapour resistance
Kit
2 x Aeroflex pre insulated hoses
2 x Fibre washers
128-3601 Straight Hose
128-3602 Angled Hose
Insulation
DiversiTech PVC Coated External Grade Insulation
Features + Benefits
PVC Coated weather protected covering to avoid UV degradation and animal damage
Class O weatherproof and UV stable
Helps installations comply with building regulations for heat loss
Outstanding protection against the elements on external pipework with weatherproof and UV stable PVC coating
Design offers a quick and secure ‘tape free’ installation with its peel and seal join and self adhesive wrap over flap
DiversiTech Pre Slit + Seal Insulation
LengthDiameterID
FH-I-1000-28-SLIT Pre Slit + Seal Insulation 1000mm19mm28mm
FH-I-1000-35-SLIT Pre Slit + Seal Insulation 1000mm 19mm35mm INS-TAPE-10-PK PVC Coated Weather + Waterproof Tape 250mm1mm 35 Pack
DiversiTech Through The Wall Insulation Kit
Features + Benefits
Avoids heat loss and improves efficiency of the installed air source heat pump
Sleeved PVC coated insulation kit containing 2 x straight lengths (320mm) and 2 x elbows
19mm wall insulation with a tough PVC coating
Suitable for both 22mm and 28mm pipe work
Provides both thermal insulation within the wall, and comes complete with an elbow section to cover the external copper pipe connection
PVC Coated Weather + Waterproof Tape
Primary Pro External Heating Insulation
Features + Benefits
Protected with unique weather and UV protective coating allowing you to cut/mitre to the required size Insulation should go through fabric of wall then sealed to be fully insulated
Primary Pro External Heating Insulation
AS045 Primary Pro 22mm x 25mm Insulation
AS022 Primary Pro 28mm x 19mm Insulation
AS033 Primary Pro 35mm x 19mm Insulation
AS042 Primary Pro 42mm x 19mm Insulation
PPE028 28mm Pre Made Elbows
PPE035 35mm Pre Made Elbows
Primary Pro Wall Sleeve
Features + Benefits
Protects insulated pipework through wall for 22mm, 28mm and 35mm
LengthDiameterThicknessID
1000mm65mm25mm22
1000mm 78mm19mm28
1000mm 83mm19mm35
1000mm 85mm19mm42
120mm60mm19mm28
130mm75mm19mm35
Primary Pro Sleeves can be fitted and sealed using Bond & Seal to prevent heat loss and moisture ingress
Primary Pro Wall Sleeve
PS028 Primary Pro 22/28mm Sleeve
LengthDiameterThicknessID
1000mm72mm25mm22/25
PS035 Primary Pro 35mm Sleeve 1000mm87mm19mm35
Sealing ring that makes sealing external walls simple
Primary Pro Maintenance Coat
Features
Insulation
Primary Pro Grinder Head
Features + Benefits
Designed to flatten any uneven surfaces, makes a 4mm indentation to the flat wall (brick wall) to make the wall sealing surface flush
Primary Pro Joint Covers
Features
Trunking
DiversiTech SpeediDuct® Duct
Features + Benefits
150mm width, 2000mm length
Available in black or white finish
TR-D-150-B SpeediDuct Trunking (Black)
TR-D-150-W SpeediDuct Trunking (White)
DiversiTech SpeediDuct® Wall Cover
Features + Benefits
150mm width
Available in black or white finish
TR-WC-150-B SpeediDuct Wall Cover (Black)
TR-WC-150-W SpeediDuct Wall Cover (White)
DiversiTech SpeediDuct® External Trunking
on DiversiTech Trunking
SpeediDuct® is a system used for air source heat pumps and services. Made out of rigid PVC, the colours are fadeproof, UV resistant and fireproof. The trunking contributes to reducing energy consumption. Suitable for indoor and outdoor use, it can be painted to match its environment.
Features + Benefits
Made of rigid, shockproof, UV-stabilised fire resistant PVC B
High-quality
Usable from -20°C to +60°C in a static position
Inside fixation rail (SpinFix) enables use of cable ties to strap and keep the linesets in place – contributing to the duct rigidity
Large selection of outdoor trunking options available
Quick and easy to install
UV Stable
DiversiTech SpeediDuct® Connection Piece
Features + Benefits
150mm width
Available in black or white finish
TR-CP-150-B SpeediDuct Connection Piece (Black)
TR-CP-150-W SpeediDuct Connection Piece (White)
DiversiTech SpeediDuct® 90° External Bend
Features + Benefits
150mm width
Available in black or white finish
TR-EC-150-B SpeediDuct 90° External Bend (Black)
TR-EC-150-W SpeediDuct 90° External Bend (White)
DiversiTech SpeediDuct® Flat Bend
Features + Benefits
150mm width
Available in black or white finish
TR-FB-150-B SpeediDuct Flat Bend (Black)
TR-FB-150-W SpeediDuct Flat Bend (White)
DiversiTech SpeediDuct® 90° Internal Bend
Features + Benefits
150mm width
Available in black or white finish
TR-IC-150-B SpeediDuct 90° Internal Bend (Black)
TR-IC-150-W SpeediDuct 90° Internal Bend (White)
Guarantees
Year on DiversiTech Mounting Brackets + Condensate Trays
Mounting Brackets + Condensate Trays
DiversiTech Wall Mounting Brackets
CBR2-M Type 2 Bracket – MediumIvory (RAL 7032) 90kg
DiversiTech Wall Mounting Brackets
These flat-packed, self assembly brackets provide a professional finish to the installation of wall mounted outdoor condensing units and air source heat pumps.
Features + Benefits
Integral spirit level for easier, correct installation
Uprights mount anywhere on the crossbar which enables the arm span to be adjusted easily
Adjustable wall spacers to level the arms
Safe working load up to 250kg
Suitable to match most brands of condensing units and domestic air source heat pumps
All brackets are tested to 2 x safe working load and go through a 4 stage anti corrosion coating process
CBR2-XL-BL Type 2 Bracket – XL Black 250kg 1040mm550mm660mm16.2kg
CBR2-XXL-3A-BL-DA Type 2 Bracket – XXL (3 Arms)Black 250kg 1120mm550mm780mm17.3kg AVMB-1 AV Mounting Bolts (Pack of 4)
*All brackets are tested to twice the safe working loads at an independent UK facility
DiversiTech Easy-Fit Condensate Collection Trays
These metal trays have a convex profile and a recessed surface flush, drain hose adaptor, minimising the amount of standing water left in the tray.
Features + Benefits
25mm height trays with concave profile for efficient drainage
Supplied with fixing arms to mount to brackets (wall brackets not included)
All trays go through a 4-stage anti-corrosion process
Concave profile ensures effective water drainage
Recessed, surface-flush drain pipe adaptor minimises standing water in the tray ½” BSP mail thread on drain outlet
DiversiTech Easy-Fit Condensate Trays
DiversiTech Flexi Foot with Strut Kits
FF-600-S-150-KIT-3
DiversiTech Baby Sumo Adjustable Rubber Support Foot
DiversiTech Flexi Foot with Strut Kits
Flexi Foot with Strut Kits – These kits can support air source heat pumps, and be used in single form as a flexi foot with strut on a variety of outdoor equipment such as cable trays and pipework etc.
Features + Benefits
Made from heavy-duty recycled rubber
21 x 41mm galvanized steel strut is supplied bonded to the rubber
Drain slots moulded to the underside of the foot
600mm kit size
Foot material density 1.0kg/cm
Fast and simple installation
480 hour salt spray tested for durability against the elements
DiversiTech Baby Sumo Adjustable Rubber Support Foot
These mini adjustable feet are perfect as ground supports for AC and ASHP units. They are made from reprocessing discarded tyres where 70-95% of the rubber can be recovered. These feet are made of a blend of SBR vulcanised UV-stable rubber with internal glass fibre-reinforced polypropylene.
Features + Benefits
Anti-vibration mount made of UV-stabilised rubber compound
Suitable for supporting units on uneven or sloping surfaces
160-210mm adjustable height
NBR rubber washer at the fixing point to further reduce vibration
Support surface features a substantial contact area offering a stable and secure base
Solid structure prevents water stagnation and seepage
-30ºC to +75ºC working temperature
Includes integral M10 bolt nut & washer, NBR rubber anti vibration washer and integrated spirit level
DiversiTech Floor Tray Mounting Bracket Kit
When units are mounted at floor level, condensate discharge needs to be directed towards a drain or soak-away to avoid condensate causing a slip hazard.
Features + Benefits
This floor bracket kit allows the metal tray to be mounted onto a flexi foot kit
Bracket kit allows a condensate tray to be mounted on to flexi foot kit. The ASHP can then be mounted on to the bracket
Includes all necessary fixings for quick and easy installation
Rob Pond Anti Vibration Rubber Feet
These anti-vibration feet are designed to provide superior stability and noise reduction for various types of equipment and appliances. These sturdy feet effectively minimise movement and absorb vibrations, ensuring smoother operation and prolonging the life of your machinery.
Features + Benefits
Anti-vibration and noise absorption
Includes all necessary fixings for quick and easy installation
Produced from recycled rubber with 41mm x 21mm bonded channel
-40ºC to +80ºC working temperature
DiversiTech
Buffers + Vessels
Inta Zil-B Buffer Vessel
Inta Zil-B Buffer Vessels
Inta Zil-B buffer vessels are designed to store thermal energy generated by a heat pump system for later use when required.
Zil-B buffer vessels are manufactured to the highest quality and standard, to ensure they maintain optimum system performance, helping to enhance the heat pumps overall efficiency.
Features + Benefits
Available in 25, 50, 80 + 100 litre capacity
Acts as a buffer storing additional volume and also as a hydraulic separator, separating the primary and secondary circuits
Eliminates compressor pump short cycling
Heat efficient for the heat pump defrost cycle
Adjustable wall bracket to assist in the event of an uneven install surface
41mm premium polyurethane foam insulation with minimal heat loss
Improves the operating efficiency of heat pumps
Additional connections for venting and drainage
4 Bar maximum inlet pressure (Static)
95°C maximum inlet temperature
Suitable for Water + Glycol up to 50%
Volumiser Vessels
Volumiser Vessels
Provides a bypass route to maintain the minimum flow rate through the heat pump.
Features + Benefits
Promotes energy efficiency
Prevents short cycling
Can be used as an intermediate vessel to protect the expansion vessel membrane from excess temperatures on a solar system
Suitable for heat pump and solar systems
Equipped with entry and exit connections
Complies with PED 2014/68/EU
Suitable for solar systems in accordance with EN12977
10 Bar maximum pressure -10°C to 110°C operating temperature
Guarantees
Year on DiversiTech ASHP Soak-Away + Rotary Isolators
ASHP Soak-Away + Rotary Isolators
DiversiTech Air Source Heat Pump Soak-Away
This unique pre-bagged geo textile soak-away is used to safely dispose of the condensate from all domestic-sized air source heat pumps where drain routing is not available. This method prevents the condensate from flowing onto paths and driveways, which can freeze and cause a slip hazard.
Features + Benefits
Alternative method to condensate removal disposal and suitable for all models/ brands of air source heat pumps
Made from pre-bagged geo-textile material to prevent soil ingress
Pre filled with lightweight granules
DiversiTech Rotary Enclosed Isolators
Insulated 4-pole rotary enclosed isolators are CE marked and suitable for disconnecting the power supply to outdoor air conditioning units. The isolators are weatherproof to IP65, easy-to-install, and conform to IEC 60947-3. They have a lockable OFF position and interlocking cover which can be removed only in the OFF position. Earth and neutral terminals included and M20/25 knockouts up to 63A.
Features + Benefits
Weatherproof to IP65
Easy installation
M20/25 knockouts up to 63A
Handle lockable in off position
Interlocked cover - removable in off position only
Earth and neutral terminals included
Captive, retained cover screws
Conforms to IEC 60947-3
DiversiTech Rotary Enclosed Isolators
Heat Pump Installer Packs
Inta 28mm Heat Pump Installer Pack
The pack contains everything an engineer needs to complete the external installation. Features + Benefits
Inta Zero Ant-Freeze Valve – See page 10
Inta Flexible Connection Hoses – See page 18
Inta K-Type Extended External Ball Valves – See page 12
Inta K-Type Ball Valves Insulation – See page 13
Heat Pump Installer Packs
Inta 35mm Heat Pump Installer Pack
The pack contains everything an engineer needs to complete the external installation. Features + Benefits
Inta Zero Ant-Freeze Valve – See page 10
Inta Flexible Connection Hoses – See page 18
Inta K-Type Extended External Ball Valves – See page 12
Inta K-Type Ball Valves Insulation – See page 13
Chemicals
Adey MC10+® Biocide
With a dual biocide formulation, MC10+ tackles algae and biological contamination in low-temperature systems including underfloor heating. Extra concentrated, containing two active ingredients, it’s more effective than single biocide products.
Features + Benefits
High performance dual biocide with two separate active ingredients making it more effective than a single biocide
Prevents bacterial contamination and algae
Ensures efficient system operation
Adey MC1 Protector Liquid
High performance corrosion and scale inhibitor, MC1 is formulated to protect the central heating system. Built to keep the boiler working efficiently and help protect the system and boiler so it lasts longer. MC1 is formulated to prevent magnetite and other deposits forming, reducing debris buildup and preventing component wear and tear.
Features + Benefits
Protects against corrosion and scale
Maintains heating efficiency
Helps reduce heating costs and maintenance bills
Extends the central heating system’s lifetime
Adey MC3 Cleaner Liquid
MC3 Cleaner has been developed specifically to keep heating systems free from debris. Once added, its powerful formulation gets to work on breaking down magnetite and other sludge in as little as an hour.
Features + Benefits
Removes sludge, debris and scale
Restores heating efficiency
Suitable for all heating systems
Fast acting formula, works within 1 hour of dosing
Adey MCZero+ Anti-Freeze
MCZero+® is a concentrated monopropylene-based glycol solution designed to prevent freezing in all types of water. The formulation also contains an inhibitor to protect against corrosion and scale formation, and biocide to prevent bacterial contamination. Specially designed to protect low-temperature heating and cooling systems.
Features + Benefits
Prevents water freezing
Prevents corrosion, scale formation and microbial growth
A concentrated heat transfer fluid for Air and Ground Source Heat Pumps based on ethylene glycol. This high performance product is designed to protect against corrosion and limescale, as well as frost protection from -10 to -33°C.
Features + Benefits
High performance heat transfer fluid for maximum protection against corrosion and scale, to extend system longevity
Higher efficiency and lower viscosity than propyleneglycol based products
Lower viscosity means less energy is used to pump the heat transfer fluid around the system
Excellent pH buffering to maintain optimum system pH for a mixed-metal system
Cost effective solution where thermal efficiency is a key requirement
Compatible with all metals and materials in heat pump systems
Biocide F7 prevents bacterial contamination and fungal growth within underfloor, low temperature heating systems and chilled systems. Biocide F7 should be used in conjunction with Fernox Protector F1 or Anti-Freeze Protector Alphi-11 to offer full system protection against corrosion and scale, and to maintain energy efficiency levels. Biocide F7 is also used to clean and prevent the reoccurrence of microbiological fouling producing jelly-like deposits (fungal growths) in feed and expansion cisterns. Gas produced by fermentation within systems will also be eliminated by the addition of Biocide F7.
Features + Benefits
Prevents the reoccurrence of jelly-like deposits in low temperature heating systems such as underfloor systems and to clean feed and expansions cisterns
Fast, effective action – starts to work within 24 hours
Simple application, add via a radiator, towel rail, filling loop or inline system filter
Compatible with all Fernox Protectors
High performance, dual action biocide – disinfectant and preservation agent provides short term and long term protection
A single 200ml bottle of Biocide F7 treats up to 250m2 of underfloor systems and 150 litres of system volume
Fernox Heat Transfer Fluid HP-EG (10 Litres)
62595
Fernox Heat Transfer Fluid HP-EG (20 Litres)
Fernox Biocide F7
Chemicals
Scalemaster® Sanitising Fluid
A highly effective sanitising/disinfectant fluid for the treatment of waterborne bacteria and biofilms in low temperature domestic heat pump and underfloor heating systems, and in general storage tanks and pipework.
Includes test strips to measure diluted concentration
Scalemaster® HP-PRO Heat Transfer Fluid for Heat Pumps
Concentrate working fluid for air/ground source heat pumps & underfloor heating systems.
Features + Benefits
Inhibited monopropylene glycol (MPG) based Anti-Freeze formulation with added biocide, providing scale, corrosion and bacterial growth protection
Helps prevent limescale formation, corrosion and bacterial growth in low temperature heating systems
-14ºC frost protection, providing a wider operating range than water alone
Compatible with all materials commonly found in heat-pump and underfloor heating systems
Convenient application, mix at site with mains tap water
509013 Scalemaster® HP-PRO Heat Transfer Fluid for Heat Pumps (10 Litre)
509020 Scalemaster® HP-PRO Heat Transfer Fluid for Heat Pumps (20 Litre)
Scalemaster® HP-PRO Biocide Top-Up Treatment for Heat Pumps
Instinct Pro
IN-100 Corrosion Inhibitor
Provides top-up treatment for air/ground source heat pumps & underfloor heating systems preventing corrosion and hard water limescale precipitation, and is essential for maintaining operational efficiency of low temperature heat pump and underfloor heating systems.
Features + Benefits
Compatible with all materials commonly found in heat-pump and underfloor heating systems
A 250ml bottle is sufficient to treat 100 litres of system water
Use HP-PRO Biocide Top-Up Treatment annually to provide ongoing protection against the growth of bacteria in air/ ground source heat pumps & underfloor heating systems. A 250ml bottle is sufficient to treat 100 litres of water at zero current concentration levels.
Features + Benefits
Delivers a stronger, more persistent (longer lasting) treatment for low temperature systems
Compatible with all materials commonly found in heat-pump and underfloor heating systems
Instinct Pro
IN-300 System Cleaner
For pre-commissioning of low temperature heat pump and underfloor heating systems. Removes installation foulants, flux, grease and debris suspended in water by flushing
Features + Benefits
Ideal for treating new systems prior to adding Heat Transfer Fluid
Compatible with all materials commonly found in heat-pump and underfloor heating systems
509006 Scalemaster® HP-PRO Heat Transfer Fluid for Heat Pumps (5 Litre)
509068 Scalemaster® HP-PRO Biocide Top-Up Treatment for Heat Pumps (250ml)
508498 Scalemaster® Sanitising Fluid (1 Litre)
504247
Guarantees
Years on Scalemaster® Suprion Scale Inhibitors
Suprion – Technologically Advanced Physical Water Treatment
Requires no electrical power
Scale Inhibitors
Protects the mains water circuit of electric domestic heating & hot water immersion systems, including those with heat pumps
Scalemaster® Suprion Scale Inhibitors
Suprion EH models provide a technologically advanced, effective solution to hard water scale problems over a wide range of water applications for an extended period of time. Prevent limescale buildup in traditionally hard to treat environments which occur in electric pump/immersion heater systems.
Features + Benefits
Effective solution in preventing hard water limescale buildup and gently removing existing limescale
Protecting the mains water circuit of electric domestic heating & hot water immersion systems, including those with heat pumps (JS versions available for non-electric / general use)
Proven longevity with no decline in performance
Requires no electrical power and maintenance free with no filters or chemicals to replenish
Made in Japan
Scalemaster® Suprion Scale Inhibitors
Prevents hard water limescale buildup
950211 EH-12E 15
950228 EH-75
Underfloor Heating Designs Made Simple
All-in-one tool for calculating, designing, specifying and drawings.
Heat Load Calculations
Simplify your heat load calculations in alignment with industry standards
System Sizing
Automatically generate loop layouts with required pipe spacings
Reports + Client Drawings
Generate branded drawings and reports including system performance, energy usage and more Bill of Materials
Download the automatically generated, detailed Bill of Materials with product specification
Get your free 2-week trial and/or book a free demo today at www.h2xengineering.com
Manifold
Stainless Steel Manifold in 2 to 12 Ports (Hydraulic Balancing)
Stainless Steel manifold for HVAC systems with Hydraulic Balancing and independent setting from each individual circuit.
Features + Benefits
Pre-fitted mounting bracket
1” isolation ball valve with temperature gauge (flow and return)
Built-in pressure gauge
Balancing valve on each return point
Flow meter on each flow point with shut-off function
Fill and drain point on flow and return
Manual air vent
Independent setting for each circuit
Suitable for water or glycol (Maximum 30% glycol)
6 Bar maximum working pressure
5°C to 70°C workingtemperature range
¾” flow/return connections (12 mm and 16 mm Euro
cone pipe connections sold separately)
50mm centres on flow/return connections
Left or Right Inlet/Outlet
0–5L/min flow meter scale
G1”F (ISO 228-1) main connections
G¾”M (ISO 228-1) outlets
Finish – Stainless Steel
Seals – EPDM
Handle – ABS
Springs – Stainless Steel
Brackets – Chrome plated steel
Adaptors – Brass
IN-116602-AB-BV
IN-116603-AB-BV
IN-116604-AB-BV
IN-116605-AB-BV
IN-116606-AB-BV
IN-116607-AB-BV
IN-116608-AB-BV
IN-116609-AB-BV
IN-116610-AB-BV
IN-116611-AB-BV
IN-116612-AB-BV
Manifold (2 Port)
Manifold (3 Port)
Manifold (4 Port)
Manifold (5 Port)
Manifold (6 Port)
Manifold (7 Port)
Manifold (8 Port)
Manifold (9 Port)
Manifold (10 Port)
Manifold (11 Port)
Manifold (12 Port)
Guarantees Years on Stainless Steel Manifold Years on 230V UFH Actuator
Instinct Pro Hydraulic Balancing Manifold and Gauges – Makes for Easy Installation, Commissioning and On-Site Testing
Bright coloured caps and flow meters for enhanced visibility
Manual air vent
Universal inlets and outlets to adapt various pipe types and sizes (Union nut + ring supplied separately)
Flow and return isolation valves (comes with temperature gauge as standard)
in
Balancing valves (Comes with key for setting)
230V UFH Actuator
The valve actuator helps improve the energy efficiency of the system by allowing individual room temperature control.
Features + Benefits
Normal Closed (NC)
Complete compatibility to valve adapter system
Simple snap-on installation
360° installation position
Patented 100% protection against leaky valves
First open function (NC type only)
Adaptation check on valve
Alignment aid on the valve
Surge protection
Certified by LL-C
Finish – Yellow
Dimensions – 62(h) x 42(w) x 42(d) mm
Stroke – 3mm
Power Consumption – 2W
IN-2033-230V 230V UFH Actuator
Swivel hose connections to help with easier filling, testing and servicing
Specification
Operating Voltage24V/230V AC (+/-15%) 50/60Hz
Maximum Inrush Current < 200mA during 100ms max
Operating Power2W
Stroke (Actuator Travel)3mm
Actuating Force100 N +10%
Storage Temperature-25°C to +60°C
Degree of ProtectionII
Type of ProtectionIP54
CE Conformity EN 60730 EN 61000
Connecting Cable/Colour2 x 0.5mm2 PVC / Light Grey
Cable Length 1m
Surge Protection According to EN60335-1 2.5 kV
Left and right outlets
Built
pressure gauge
Blending Valve + Pump Pack
Blending Valve + Pump Pack (Bastion Pump)
Designed to work with manifolds of all types, on 210mm centres. The thermostatic blending valve is a bolt on unit providing a quick and simple system to install.
Features + Benefits
Supplied with A-rated 6m Bastion Pump and ¾” ball valves
The water supply temperature can be adjusted according to the structure of the floor
Designed for heat pump and low temperature systems that do require a thermostatic control valve
Left or right connections (Reversible)
Suitable for water or glycol (Maximum 30% glycol)
35°C to 60°C temperature range
6 Bar maximum working pressure
≤ 0.20 energy efficiency index (EEI)
6m maximum delivery head
3.0m3/h maximum volume flow
Dimensions – 300(h) x 196(w) x 128(d) mm
Weight – 3.7kg
Guarantees
Years on Blending Valve Years on Bastion Pump Years on Wilo Pump
Blending Valve + Pump Pack (Wilo Pump)
Designed to work with manifolds of all types, on 210mm centres. The thermostatic blending valve is a bolt on unit providing a quick and simple system to install.
Features + Benefits
Supplied with A-rated 6m Wilo Pump and ¾” ball valves
The water supply temperature can be adjusted according to the structure of the floor
Designed for heat pump and low temperature systems that do require a thermostatic control valve
Left or right connections (Reversible)
Suitable for water or glycol (Maximum 30% glycol)
35°C to 60°C temperature range
6 Bar maximum working pressure
≤ 0.20 energy efficiency index (EEI)
6.3m maximum delivery head
2.6m3/h maximum volume flow
Dimensions – 302(h) x 230(w) x 122(d) mm
Weight – 1.87kg
Single Room Control Pump Pack
Single Room Control Pump Pack (Bastion Pump)
UFH control pack for providing temperature controlled mixed water in single room applications to an underfloor heating system with a heat output up to 3Kw.
Features + Benefits
Pre-wired A-rated 6m Bastion Pump
Flow Temperature Thermostat
Integral ball valves for connecting/isolating the primary heating system
Adjustable thermostatic blending valve
Includes ½” to ¾” fittings excluding euro cones
Fixing bracket with anti-vibration mountings for silent operation
35°C to 60°C temperature range
10 Bar maximum working pressure
≤ 0.20 energy efficiency index (EEI)
6m maximum delivery head
3.0m3/h maximum volume flow
Dimensions – 302(h) x 230(w) x 132(d) mm
Weight – 4.265kg
IN-2532J+BAS-PUMP UFH Single Room Control Pump Pack (Bastion Pump)
Replacement Pumps
Bastion Pump Dimensions – 130(h) x 90(w) x 127(d) mm
Single Room Control Pump Pack (Wilo Pump)
UFH control pack for providing temperature controlled mixed water in single room applications to an underfloor heating system with a heat output up to 3Kw.
Features + Benefits
Pre-wired A-rated 6m Wilo Pump
Flow Temperature Thermostat
Integral ball valves for connecting/isolating the primary heating system
Adjustable thermostatic blending valve
Includes ½” to ¾” fittings excluding euro cones
Fixing bracket with anti-vibration mountings for silent operation
35°C to 60°C temperature range
10 Bar maximum working pressure
≤ 0.20 energy efficiency index (EEI)
6.3m maximum delivery head
2.6m3/h maximum volume flow
Dimensions – 302(h) x 230(w) x 132(d) mm
Weight – 2.43kg
UFH Single Room Control Pump Pack (Wilo Pump)
Wilo Pump
IN-2532J+WILO-PUMP
Pipes
PERT EVOH Lightweight + Ultra-Flexible Pipe
PERT
EVOH Pipe (12mm – 3 Layers)
The INSTINCT PRO 12mm 3-layer pipe is made up of an oxygen barrier, a layer of adhesive, and a layer of PERT pipe. Lightweight and ultra-flexible, easy to bend, our PERT EVOH 12mm barrier pipe is the ideal choice for hassle-free routing and reduced installation time.
Features + Benefits
Pipe Dimensions – 12mm x 1.6mm, 3 Layers
Finish – Yellow
IN-PE12080 12mm x 80m Coil (Weight – 4.3kg)
IN-PE12320 12mm x 320m Coil (Weight – 17.0kg)
PERT-AL-PERT
(MLCP) Aluminium Lined Pipe
PERT-AL-PERT Pipe (12mm – 5 Layers)
A flexible yet durable solution, the aluminium layer provides strength and also an oxygen barrier. made up of 2 layers of PERT pipe, 2 layers of adhesive, and 1 layer of aluminium. Our professional-grade PERT-AL-PERT 12mm (multilayer) pipe is the perfect choice for underfloor heating installations, offering the benefits of both plastic and metal.
Features + Benefits
Pipe Dimensions – 12mm x 1.6mm, 5 Layers
Finish – White
IN-PAP12080 12mm x 80m Coil (Weight – 5.2kg)
IN-PAP12160 12mm x 160m Coil (Weight – 10.3kg)
IN-PAP12240 12mm x 240m Coil (Weight – 15.4kg)
PERT EVOH Pipe (16mm – 5 Layers)
The INSTINCT PRO 16mm 5-layer pipe is made up of an oxygen barrier, 2 layers of adhesive, and 2 layers of PERT pipe. Lightweight and ultra-flexible, easy to bend, our PERT EVOH 16mm barrier pipe is the ideal choice for hassle-free routing and reduced installation time.
Features + Benefits
Pipe Dimensions – 12mm x 2mm, 5 Layers
Finish – Yellow
IN-PE16120
x 120m Coil (Weight – 10.4kg)
IN-PE16240 16mm x 240m Coil (Weight – 20.7kg)
IN-PE16300 16mm x 300m Coil (Weight – 25.8kg)
IN-PE16500 16mm x 500m Coil (Weight – 43.0kg)
PERT-AL-PERT Pipe (16mm – 5 Layers)
A flexible yet durable solution, the aluminium layer provides strength and also an oxygen barrier, made up of 2 layers of PERT pipe, 2 layers of adhesive, and 1 layer of aluminium. Our professional-grade PERT-AL-PERT 16mm (multilayer) pipe is the perfect choice for underfloor heating installations, offering the benefits of both plastic and metal.
Features + Benefits
Pipe Dimensions – 16mm x 2mm, 5 Layers
Finish – White
IN-PAP16120 16mm x 120m Coil (Weight – 12.6kg)
IN-PAP16240 16mm x 240m Coil (Weight – 25.2kg)
IN-PAP16500 16mm x 500m Coil (Weight – 52.5kg)
Guarantees
Years on UFH Accessories + Ancillaries
Standard Clip Gun + Tracker Clips
After laying the insulating panel, proceed to lay the pipes with the tracker clips using the clip gun tool. The clips, provided in rows of 25 clips each, must be loaded in the tool, the panels are secured by pressing the handle down.
Features + Benefits
For use with 16mm pipe
Quantity –
1 (IN-CLG01)
300 Pack (ZL-CL01 + ZL-CL02)
Dimensions –
900(h) x 320(w) x 110(d) mm (IN-CLG01)
41.6(h) x 37.5(w) x 6(d) mm (Zl-CL01)
56.5(h) x 36.4(w) x 6.2(d) mm (Zl-CL02)
IN-CLG01 Standard Clip Gun
ZL-CL01 40mm Tracker Clips
ZL-CL02 60mm Tracker Clips
Aluminium Spreader Plate
Quantity – 1
Dimensions – 390(h) x 1000(w) x 0.45(d) mm
Pipe Centres –
IN-AP2 – 200mm
IN-AP3 – 133mm
IN-AP2 Double Groove Aluminium Plate (Fit 16mm)
IN-AP3 Triple Groove Aluminium Plate (Fit 16mm)
Premier Uncoiler
Quantity – 1
Dimensions – 887(h) x 1416(w) x 1416(d) mm
Max. Coil Size – 1.3m Max Weight – 200kg
IN-1235E
Eurocone Fittings
Quantity – 1
Dimensions –
31.6(h) x 31.6(w) x 18(d) mm (ZL-1036/12/1.6)
32(h) x 32(w) x 17.5(d) mm (ZL-1039/16)
IN-ZL-1039/12/1.6 12 x 1.6 For Multi/Pex (2 Pack)
IN-ZL-1039/16 16 x 2.0 For Multi/Pex (2 Pack)
Accessories + Ancillaries
Pressure Test Pump
Quantity – 1
Dimensions – 160(h) x 490(w) x 160(d) mm
IN-RP-50
Plastic Elbow
Quantity – 1
Dimensions – 165(h) x 75(w) x 24.5(d) mm
To Fit Pipe Size – 16mm
ZL-PE01
Plastic Star Reamer (12mm, 16mm, 20mm)
Quantity – 1
Dimensions – 90(h) x 90(w) x 26(d) mm
ZL-RE01
Track Rail Universal 14-16mm (With Tape)
Quantity – 1
Dimensions – 1000(h) x 45(w) x 24(d) mm
IN-CR02
Tools + Spares
Pipe Cutter
This pipe cutter is ideal for effectively cutting multilayer underfloor heating pipe. Quick and simple to use and designed to ensure a smooth clean cut that will not damage the pipe.
Quantity – 1
Dimensions – 248(h) x 38(w) x 39(d) mm
IN-PA01
1” Ball Valve (with Temp Gauge Set Red + Blue – Pair)
The 1” Ball Valve and Temperature Gauge Set delivers precision, durability, and ease of use, making it an essential component for any manifold system.
Quantity – 1
Dimensions – 103(h) x 70(w) x 74(d) mm
ZL-4012
MLCP Calibration Beveling Set
For multilayer composite and Pex pipe up to Ø32mm.
Features + Benefits
Cutting device made of steel for long lifetime and with sharp cutting edge
Large opening for removing pipe chips
Anodic oxidation aluminium alloy sleeve is light and wear-resisting
Hexagonal connector for changing different sizes easily, for handle, standard bit connectors or cordless screw driver
Ø16, 20, 25, 32mm deburring range
Quantity – 1
Dimensions –227(h) x 110(w) x 60(d) mm
Flow Meter Spare
This flow meter is uniquely designed to work with INSTINCT PRO manifolds, providing accurate and reliable flow readings.
Quantity – 1
Dimensions – 30.5(h) x 36.5(w) x 101(d) mm
IN-1211
¾” Ball Valve Set (for Blending Valve Red + Blue – Pair)
These ¾” Isolation Ball Valves (supplied as a red/blue pair) are for isolating the underfloor heating manifold and pump set from the heating system.
Quantity – 1
Dimensions – 82(h) x 40(w) x 65(d) mm
ZL-4130B
ZL-1236
Guarantees
SpiderFix Panel – A low-profile design maximises floor-to-ceiling height and speeds up heat response
Available Jan 2026
SpiderFix Panel
The SpiderFix Panel is a robust injection-molded board made from 100% recycled plastic, designed to hold 12–16mm underfloor heating pipes securely in place. Its low-profile build makes it suitable for both retrofit and new-build projects. With self-adhesive backing, interlocking connectors, and easy cutting grooves, the panels are quick to install and adaptable to different room layouts. Once laid, they provide a stable base for floor finishes and help ensure an accurate pipe layout with consistent heat distribution.
Features + Benefits
Self-adhesive panels with interlocking edges and trimming lines for quick, accurate fitting
Works with wood, interlocking boards, LVT, linoleum, carpet and tiles
Ensures even heat distribution, stable pipe fixing and improved system response
High-strength injection-molded plastic designed to resist wear and deformation
Snap-clips connect panels securely for a continuous surface
Cutting grooves at 50mm intervals for easy trimming and adjustments
Low-profile design maximises floor-to-ceiling height and speeds up heat response
1200 x 600 x 16.5mm, routed to accept 12mm pipe (SP-12)
1200 x 600 x 20mm, routed to accept 16mm pipe (SP-16)
Adjustable pipe spacing accommodates 50mm, 100 mm and 150–300mmcentres for flexible pipe layouts
Direct on subfloor –Tiles/Wood 20–25 mm, LVT/Linoleum/Carpet 25–30mm
Over Insulation Boards –Tiles/Wood/LVT/Linoleum/Carpet 30–35 mm
SP-12
SP-16
SpiderFix Panel (for 12mm Pipe)
SpiderFix Panel (for 16mm Pipe)
Ensures even heat distribution and faster system response
Floor Boards
Fibre Reinforced Gypsum Board
Low profile high performance underfloor heating board. Manufactured from reinforced gypsum, the CNC routed panels are engineered to provide optimum underfloor heating conditions in new build and refurbishment developments.
100% dry system that is able to accept various floor finishes (carpets, wood floors, ceramic tiles etc) with 24 hours of installation. A significant time saving benefit over wet system alternatives.
Features + Benefits
Efficient and fast transfer of heat
Suitable for all types of 12 and 16mm pipework
High heat retention
Can be installed as an acoustic system on separating floors
Straights, circles, radius returns and universal CNC routing options
High performance chipboard available in 1200mm and 2400mm lengths, with a foil face for even heat transfer. Boards provide extremely efficient and high performance underfloor heating for building occupants. They are ideal for all types of developments including residential, care homes and offices.
This system is ideal for replacing existing floor boarding on timber joisted floors as it has minimal impact on floor heights.
Features + Benefits
High heat output, with foil facing and pipe centre options
Suitable for all types of 12 and 16mm pipework
Faster response times – UFH pipes are closer to surface finish than traditional FFB (fit from below) installation
Structurally tested to comply with BS:EN1195
0.6% moisture absorption
Pipe centres on the board are 150mm
Plain Faced UFH Chipboard
INCHIP0226001200R-12/150
INCHIP0226001200R-16/150
INCHIP0226002400R-12/150
x 600 x 22mm for 12mm Pipes
x 600 x 22mm for 16mm Pipes
x 600 x 22mm for 12mm Pipes
INCHIP0226002400R-16/150 2400 x 600 x 22mm for 16mm Pipes
50mu Foil Faced UFH Chipboard
INCHIP0226001200R-FF-12/150 1200 x 600 x 22mm for 12mm Pipes
INCHIP0226001200R-FF-16/150
x 600 x 22mm for 16mm Pipes
INCHIP0226002400R-FF-12/150 2400 x 600 x 22mm for 12mm Pipes
INCHIP0226002400R-FF-16/150
2400 x 600 x 22mm for 16mm Pipes
Fibre Cement Cover Boards (Printed with Pipe Layout Design)
INBACKER0061200900PRINT
1200 x 900 x 6mm
Floor Boards
Routed Extruded Polystyrene Board (XPS300)
A range of high quality underfloor heating insulation boards provide extremely high compressive strength, with 300kPa from 18mm thickness offered as standard. These high performance underfloor heating panels are ideal for new build and refurbishment projects, and are ideal for all types of developments including offsite, residential and commercial applications.
Features + Benefits
High thermal performance, with an option of foil facing Suitable for all types of 12 and 16mm UFH pipes, multiple thickness’ available Ultra high compressive strength and high heat transfer Can be used as part of an acoustic system on separating floors
0.034 Wmk thermal conductivity
300kPa compressive strength
<0.7% (EN 12087) moisture absorption Pipe centres on the board are 150mm
INXPS0186001200(300)12/150-FF 1200 x 600 x 18mm for 12mm Pipes
INXPS0206001200(300)16/150-FF 1200 x 600 x 20mm for 16mm Pipes
INXPS0256001200(300)R-16/150-FF 1200 x 600 x 25mm for 16mm Pipes
A range of high compressive strength extruded polystyrene underfloor heating boards, with 500kPa offered as standard.
These high performance under floor heating panels are ideal for new build and refurbishment projects, and are ideal for all types of developments including offsite, residential and commercial applications.
Features + Benefits
High thermal performance, with an option of foil facing
Suitable for all types of 12 and 16mm UFH pipes, multiple thickness’ available
Ultra high compressive strength and high heat transfer
Can be used as part of an acoustic system on separating floors
INXPS166001200(500)12/150FF-100 1200 x 600 x 16mm for 16mm Pipes
INXPS206001200(500)16150FF-100
x 600 x 20mm for 16mm Pipes new
Floor Boards
EPS Board
High compressive strength underfloor heating boards, featuring CNC grooved channels for UFH pipes to be installed. A foil-faced version of the boards is also available, offering even greater heat outputs
EPS insulation boards provide extremely efficient and high performance under floor heating for building occupants and are ideal for residential developments.
Features + Benefits
High compressive strength with an option of aluminium foil facing Suitable for all types of 12 and 16mm UFH pipes, multiple thickness’ available
Excellent thermal resistance
Can be used as part of an acoustic floating floor system
A range of high performance perimeter edge strips, offering a thermal break on the perimeter of each heated floor and also allowing for contraction and expansion of all types of screeded floor finishes.
The closed cell polyethylene foam rolls are available with options of bonded PVC apron and self adhesive backing.
Successful installation of perimeter edge strips will also help with the overall thermal performance to achieve specific U-valve and general part L regulations.
Features + Benefits
Lightweight, easy to handle and quick to install
100% recyclable (Zero VOC’s, Zero CFC’s, Zero ODPs, GWP <5)
Available in multiple widths and lengths
Will improve the overall thermal performance and efficiency of floors
High performance straight edge acoustic flanking strips. Install in conjunction with acoustic flooring and wall lining products to isolate the treatments from walls, skirting boards and all abutments, reducing the risk of flanking transmission occurring and acoustic failure.
Features + Benefits
Isolate floors and walls to prevent floors failing Part E sound testing
Available in multiple widths
Lightweight, easy to handle and quick to install
100% recyclable (Zero VOC’s, Zero CFC’s, Zero ODPs, GWP <5)
-40°C to +60°C working temperature
0.02 - 0.03 mg/cm² water absorption
Extruded closed cell polylene foam material
Finish – White
Quantity – 1
Dimensions – 100(h) x 600(w) x 600(d) mm
INDGEA0510050
Acoustic ‘L’ Shaped Flanking Strips
5mm x 100mm x 50m
Acoustic ‘L’ shaped soundproofing strips installed around the floor perimeter of acoustic floor treatments. They isolate the acoustic flooring from the walls and skirting boards / door frames, and prevent potential acoustic flanking transmission occurring.
Features + Benefits
White colour speeds up build times compared to other colour options
Isolate floating floor and prevent floors failing Part E sound testing
Lightweight, easy to handle and quick to install
100% recyclable (Zero VOC’s, Zero CFC’s, Zero ODPs, GWP <5)
Finish – White
Quantity – 1
Dimensions – 32(h) x 32(w) x 2000(d) mm
Thermostats
Warmup 7iE™ Smart Matter WiFi Thermostat 54
Warmup Element™ WiFi Thermostat 55
Warmup Tempo™ Programmable Thermostat55
Electric Underfloor Heating Features
There are many features in our electric underfloor heating range. Use the icons to help choose the right option for you.
Touch Controls
Multi function
touchscreen providing effortless control at your fingertips.
Compatible with Smart Devices
Monitor your energy + cost graphs on mobile, tablet and desktop.
Customise Display
Personalise with photo backgrounds, the only underfloor heating thermostat with this ability.
IP20 Rated
The thermostat is touchproof and will be resistant to dust or objects that are over 12mm in size. However, it has no protection whatsoever against water.
Colour Display
Clear graphical display makes any adjustment quick and easy. Choose the display style that suits you best – wide choice of screen themes.
Mono Display
Easy-to-use interface and intuitive design enables end users to choose the time as easily as they would with a watch or clock and quickly set their programs.
IP33 Rated
The thermostat is protected from tools and wires greater than 2.5mm. Protected from water spray less than 60 degrees from vertical.
WiFi Control
Allows you to link your thermostat with your home’s existing Smart technologies such as the Amazon Echo or Google Home.
App Control
SmartGeo is a unique technology developed by Warmup and built into the MyHeating App that uses an advanced algorithm to understand the most efficient heat settings for your home.
Materials
DCM-PROTM
Take a closer look at the DCM-PROTM features video, scan to find out more
DCM-PROTM – Heated Decoupling System
Warmup DCM-PROTM is an electric underfloor heating system that provides anti-fracture protection to tiled floor finishes. There are two alternative decoupling membranes within the range; one is backed with a standard non-woven fleece, the other a peel and stick adhesive, which provides the fastest solution for installing electric underfloor heating.
The patented membranes provide a versatile solution for any heated floor, with the peel and stick version being ideal for rapid installation over Warmup™ insulation or smooth subfloors, while the fleece backed version is better suited to coarse and/or damp surfaces.
Anti-Fracture Protection
DCM-PRO™ Peel and Stick uses a viscous adhesive that absorbs the strain created as the subfloor grows and shrinks with the seasons, protecting the floor finish from excessive stress that would otherwise cause cracks.
DCM-PRO™ Fleece uses a traditional decoupling fleece layer, perfect for use with levellers or for installation on damp or coarse subfloors.
For a Variety of Floor Finishes
Designed for use under tile and stone floor, the DCM-PRO™ can also be installed under other flooring types including vinyl, carpet and timber by adding a 10 mm layer of levelling compound to the membrane first.
Fastest to Install
Protects Floor from Damage
Rated as high performance, DCM-PRO is proven to protect tiled floors from cracking (ANSI 118.12.5.4).
The self-healing decoupling layer contracts and expands to ideal with seasonal changes, preventing damage occurring from gaps and cracks in the subfloor. (Patent No. GB2548319B).
Protects floor surface from damage caused by subfloor movement.
DCM-PRO™ Peel and Stick with it’s self-adhesive underside can be affixed directly to the subfloor, eliminating the need to use tile adhesive below, significantly reducing installation time. Typical Floor Build-Up
Patented adhesive layer slides and stretches with expansion.
Adhesive layer contracts and self-heals if gap shrinks due to seasonal changes (typical for wood subfloors).
Decoupling Membrane (with adhesive backing)
Heating Cable
6 Warmup Ultralight™ (optional)
7 Flexible Tile Adhesive (optional)
8 Warmup Primer
9 Pre-insulated Subfloor (with a surface regularity of SR1*)
*If installing the optional Warmup Ultralight™, refer to its installation manual for its sub floor requirements
DCM-PROTM Mat V3 – Specification
Product Code DCM-PS
DCM-F-# (Fleece)
Colour Red
Dimensions
Composition
DCM-#-0.73 – 0.73m² Sheet (985mm x 741mm)
DCM-#-14 – 14m² Roll (985mm x 14.3m)
Polypropylene mat with peel and stick or fleece backing
DCM-PROTM
DCM-PROTM Cables – Specification
Product Code
DCM-C-#
Connection 3m long coldtail Flat 2 core cable with earth braid
The standard cable spacing is 3 castellations (90mm), but the system is designed to have the cable spacing adjusted to match both power and area requirements:
DCM-PROTM 225 W/m² – based on 2 castellations
DCM-PROTM 150 W/m² – based on 3 castellations (standard)
DCM-PROTM 112.5 W/m² – based on 4 castellations
Heated area at different spacings, m² Castellations
2 3 4
DCM-PROTM Mat V3 – Product Format LengthWidth
DCM-PS-0.73 DCM-PRO Peel & Stick V3 Mat - 0.73m² Sheet741mm985mm
DCM-PS-14 DCM-PRO Peel & Stick V3 Mat - 14m² Roll14,252mm985mm
DCM-F-0.73 DCM-PRO Fleece V3 Mat - 0.73m² Sheet741mm985mm
DCM-F-14 DCM-PRO Fleece V3 Mat - 14m² Roll 14,252mm985mm
DCM-PROTM Cables – Ancillaries Format LengthHeightWidthThickness
DCM-E-25 Perimeter Edge Strip 25m–30mm10mm
DCM-T-10 Waterproofing Tape 10m–120mm1mm
DCM-R-I Internal Corner120mm60mm120mm1mm
DCM-R-E External Corner120mm60mm120mm1mm
DCM-C-9
DCM-C-16
F&Qs
Waterproofing Tape Internal
Waterproofing Tape External Waterproofing Tape
Q – Can the DCM-PRO™ system reduce the risk of my tiled floor developing cracks?
A
– As a decoupling system, the DCM-PRO™ has been designed to absorb the normal lateral movement which occurs when the subfloor and finished floor expand and contract at different rates. This has been backed up with a ‘High Performance’ rating for crack isolation, as externally tested according to ANSI 118.12.5.4 (American National Standards Institute, www.ansi.org).
Q – How does the DCM-PRO™ cable fit into the DCM-PRO™ mat?
A – The DCM-PRO™ cable clips into the castellations of the DCM-PRO™ mat. No tools are required when installing the cable into the mat. It is easily installed by running your foot or thumb along the top of the cable to guide it into the castellations.
Q
– How quickly can I lay a floor finish onto the DCM-PRO™?
A – Straight away. One of the main advantages of the self-adhesive properties of the DCM-PRO™ is no waiting time. As soon as the mat is fitted, cable installed and cable resistance checked, tiling or self-levelling can be started.
Q – Can the DCM-PRO™ system be used in a wet room?
A – Yes. With the addition of the DCM-PRO™ waterproofing tape installed following the manual, the system is waterproof and can be used in a full wet room environment.
Fleece Mat
Peel + Stick Mat
Perimeter Edge Strip
Materials
StickyMatTM
Take a closer look at the StickyMatTM installation video, scan to find out more
9 Pre-insulated Subfloor (with a surface regularity of SR1*)
*If installing the optional Warmup Ultralight™, refer to its installation manual for its sub floor requirements
StickyMatTM – 150W/m2 System
StickyMatTM – 200W/m2 System Area HeatedWattageAmps Area HeatedWattageAmps
The Warmup StickyMat™ System is designed for use within the adhesive layer under tiles or within a levelling compound under other floor finishes. The fixed spacing and self-adhesive mat makes installation of regularly shaped rooms quick and easy whilst ensuring precision is maintained. The pressure sensitive adhesive securely binds the mats to the floor, keeping them flat and ensuring the application of tile adhesive is snag free whilst allowing the mats to be easily repositioned as needed.
Quick + Easy Installation
Sturdy glass fibre mesh with pressure sensitive adhesive, for the fastest and most secure installation of electric underfloor heating
No Increase In Floor Levels
With an ultra-thin, dual fluoropolymer coated heating wire
Suitable For All Builds
StickyMat™ underfloor heating system is suitable for all building projects; retrofits, new builds and refurbishments
StickyMatTM – Specification
Product Code SPM / 2SPM
Connection 3m long coldtail, Flat 2 core cable with earth braid
Operating Voltage230 V AC: 50 Hz
Output Rating 150 W/m² (SPM) / 200 W/m² (2SPM)
Heating Cores Dual core, multi-strand heating element
Ultralight™ is a specialised composite board designed for floor heating applications. Manufactured as flat, flexible sheets they are water and mould-resistant. The top surface incorporates a heat spreading aluminium layer combined with non-woven fleece.
The core PEF insulation provides thermal separation from the floor beneath, ensuring a rapid thermal response of a heated layer of tiles or levelling compound above.
Improves Comfort and Reduces Running Costs
The heat spreading aluminium layer improves comfort and reduces running costs by providing a 50 % more even heat spread. This enables the floor to achieve the same comfort temperature whilst using 12% less energy. See Fig 1
Reduces eUFH Heat Up Times
30% faster heat up times than standard insulation boards
Protection Against Tiles Cracking
Decoupling fleece layer provides high performance protection against tiles cracking due to lateral subfloor movement in accordance with ANSI A118.12 standard
1, 6,16,170 Boards
6 mm ±0.3mm
Dimensions 800mm (W) x1200mm (L) ±6mm
Area 0.96m²
Weight of Board 1.1kg
Thermal Resistance EN 12667 0.111m² K/W
Thermal Conductivity EN 12667 0.054 W/mK
Reaction To Fire, EN 13501-1EN ISO 11952-2 Euroclass E
Release of Dangerous Substances, REACHSVHC ≤ 0.1% w/w
Compressive Strength, 10% Compression, EN 826 220 kPa
Point Loading, Tiled ANSI A118.12≥ 2.2 kN
Robinson Test, 100 - 199 mm Tiles, ASTM C627 Domestic
Mould Growth, ANSI A118.12 Does not support mould growth
Warmup UltralightTM Insulation – Product
WCI-01
WCI-06
WCI-16
WCI-170
Ultralight Insulation Board 6mm x 800mm x 1,200mm
Ultralight Insulation Board 6mm x 800mm x 1,200mm (Pack of 6 / 5.76m²)
Ultralight Insulation Board 6mm x 800mm x 1,200mm (Pack of 16 / 15.36m²)
Ultralight Insulation Board 6mm x 800mm x 1,200mm (Pallet of 170 / 163.20m²)
Heat Spread
Thermostats
Warmup 7iE™ Smart Matter WiFi Thermostat
Warmup’s 7iE™ Smart Matter WiFi Thermostat
World’s first UFH controller with a Smartphone touchscreen.
The 7iE uses advanced technology to maximise on the efficiency of a Warmup heating system. With Matter compatibility and Smartcare support included, the 7iE effortlessly integrates your heating within your Smart home ecosystem - including Apple Home, Google Home, and Amazon Alexa.
Provides Smarter Energy Savings
The 7iE™ Smart Matter WiFi Thermostat automatically adjusts your heating to maximise comfort and efficiency, with up to 25% energy saving
Effortless Smart Home Integration
The 7iE™ Smart Matter WiFi Thermostat is compatible with Apple, Google and Amazon devices through its Matter technology
Expert Heating Support
Includes expert heating support through its access to Smartcare, which provides proactive system monitoring and market-leading support for life
Features + Benefits
The 7iE™ Smart Matter WiFi Thermostat’s ultra-slim design sits just 16mm from wall
The 7iE™ Smart Matter WiFi Thermostat helps find the most efficient heat settings for a property
Quick to install, the 7iE™ Smart Matter WiFi Thermostat can be set up in minutes using the QR code
The 7iE™ Smart WiFi Thermostat provides flexible multi-zone control for water and electric UFH systems
The 7iE™ Smart Matter WiFi Thermostat helps reduce energy usage by up to 25%
Take a closer look at the ElementTM features video, scan to find out more
Warmup Tempo™ Programmable Thermostat
Features + Benefits
Simple touch buttons for accurate control of your underfloor heating system. Its sleek, unobtrusive design will suit any home décor
Easy to setup. Simply scan the QR code on the Element™ thermostat using the MyHeating app and it will automatically connect to your WiFi network
Reduce energy use by up to 25% with energy efficient MyHeating™ app technology
Compatible with all Warmup Underfloor Heating Systems
Automatic control of your heating. SmartGeo™ learns your routines and location through background communication with your smartphone and lowers temperatures when you are away, only rising them up to your ideal comfort temperature in time for your arrival home saving you money and energy
Helps find the most efficient heat settings for your home
Finish – Dark or Light
Dimensions – 86(h) x 86(w) x 16(d) mm
ELM-01-OB-DC Dark (Band Colour – Dark Chrome)
ELM-01-WH-RG Light (Band Colour – Rose Gold)
Features + Benefits
Stylish and contemporary design with an easily controlled dial and sliders
Clear screen displaying program details
Suitable with all Warmup electric and water underfloor heating systems
Available in Porcelain White and Piano Black
Perfect for the whole house with the exception of the bathroom
Finish – Piano Black or Porcelain White
Dimensions – 90(h) x 113(w) x 23(d) mm (flush fit)
Tempo™ PB Digital Thermostat – Piano Black
ELT-PB
Piano Black
ELT-PW
Porcelain White
Tempo™ PW Digital Thermostat – Porcelain White
Hot Water Cylinders that work in harmony with your boiler
Combining quality, durability, and efficiency, the Instinct hot water cylinder range has been designed to work hand-in-hand with your boiler for excellent results. Available in sizes of up to 300 litres,
Instinct’s hot water cylinders can help keep your home comfortable all year round —whatever your central heating needs.
25 year vessel warranty
Less space required – no need for a water storage tank in the loft
Perfect for homes that have a high demand for hot water
Corrugated heating coil
Manufactured from duplex stainless steel
Manufactured in the UK
Instinct hot water cylinders – a high quality addition to your central heating system.
Years on Ideal Instinct2 Combi Boilers
Ideal Instinct2 Combi Boiler
The Instinct2 combination boiler is available in outputs of 24, 30 and 35 kW providing a cost effective heating solution for a range of domestic installations. Complete with domestic hot water temperature controls including a switched preheat function, mechanical built-in timer and a digital operating status & diagnostic display, the Instinct2 provides reliable control of the homes heating and hot water performance.
Features + Benefits
Quick and easy to install
Compact cupboard fit design
Easy access to all components for smooth maintenance
Tried and tested technology (inc. Grundfos pump) Fast Fix flue turret connections
Ideal OpenTherm wired room thermostat available for Boiler Plus compliance 221527
Instinct Pro Central Heating System Chemicals will actively contribute to a healthy heating system. Page 92-93
SEDBUK
Easy
access to all components
Ideal Instinct2 35 Combi Boiler
Compact cupboard fit
Boilers
Ideal Halo Lite RF Thermostat
The Ideal Halo Lite RF is a single zone combi programmable room thermostat designed to benefit both installers and homeowners.
Boasting a large colour screen and easy to use button and dial interface. It has been tested to ensure it is intuitive and easy to understand. Specifically designed to work with the Instinct2 by providing temperature control and Boiler Plus compliance in one simple device.
Features + Benefits
Designed specifically to work with Instinct2 Boilers
Wireless control with robust signal
Maintain boiler health with on screen service and fault notifications
Fast and simple to install with out of the box pairing
Advanced settings to tailor controls to tenant and landlord needs
Easy to set heating schedules with up to 6 events per day
Load compensation provides easy Boiler Plus compliance
Frost protection for winter boiler and system protection
Compact and contemporary design with large, clear colour screen
Finish – White
Dimensions –96(h) x 96(w) x 35(d) mm (PRT) 112(h) x 108(w) x 32(d) mm (Receiver)
Power Source 4x AA Batteries (PRT), 240 Vac (Receiver)
Voltage 240 Vac
Install Location Wall or desk mounted
ERP Class VI
Boiler Plus Yes
WEEE Yes
Flue + Accessories
237423
Ideal Halo Lite RF Thermostat
Plug and play cylinders – two pipes, one cable
Quick to commission - syncs with Halo controls
Compact size, low clearance – easy to site, easy on the eye
Pumps
Instinct Hot Water Cylinders
Instinct’s hot water cylinders work hand in hand with your boiler to provide your home with the heat and warmth you need. Perfect for homes that have a high demand for hot water, Instinct hot water cylinders are a high quality addition to your central heating system. www.instinctproducts.co.uk Pages 66-69
Condensate Removal Pump
Years on Condensate Removal Pump
One-piece centrifugal pump with tank.
Centrifugal pump for heavy and contaminated condensates. Suitable for gas condensing boilers producing acid (pH > 2.5) and hot condensates (65°C max, 80°C in short peaks). Normally closed alarm contact that automatically cuts off the air conditioning system compressor or a solenoid valve.
65°C, 80°C in short peaks max condensate temperature pH > 2.5 (Gas condensing boilers) max condensate acidity
105°C thermal protection (auto reset)
Oil and acid resistant float
Finish – Grey + Black Dimensions – 183(h) x 136(w) x 293(l) mm
SI1802INAN23 Condensate Removal Pump
Kit Contents
Integrated tank pump of 2 Litre
Integrated check valve
Power cable – 2m bare ends
Alarm wires – 1m
Tubing Adapter – 10 mm (3/8”) to 6 mm (1/4”)
2 screws + plug
Unlock the potential of your project with our extensive range of bathroom, plumbing, and heating products online.
With over 3,000 top-quality products at your fingertips, you can easily find everything you need to enhance your project. Download essential documents, locate your nearest branch effortlessly, and join our community by liking and subscribing for the latest updates on news and product releases. Don’t miss out – transform your projects today!
Pumps
Guarantees
Years on Wilo Atmos PICO Circulating Pump
Wilo Atmos PICO Circulating Pump
The Wilo Atmos PICO is the ideal entry-level pump with a simple user interface and standard design. Equipped with the most essential settings and functions, it can be put into operation for heating, air conditioning and cooling applications extremely quickly and easily.
Features + Benefits
New & redesigned small circulator pump
Variable differential pressure, allowing the pump to modulate to the requirements of the system ensuring efficiency and energy savings
Ease of installation with the compact design, Wilo connector at the side and front access to motor screws
Easy to use settings, with a push button for selection, two operating modes and six curves identified by 5 LEDs
Finish – Green / Black / Grey
Dimensions –
130(h) x 102(w) x 127(d) mm (4232693)
180(h) x 102(w) x 139(d) mm (4232696)
Weight –
1.9kg (4232693), 2.3kg (4232696)
Max. Operating
Bar
Performance Range6m to 3.5 m3/h
Water Temp at Max
Ambient Temp of +40°C -10°C/95°C
Protection ClassIPX2D
Min/Max Power Consumption 4-40W
Display 7 LEDs
Operation Push button
Setting (nb curves)6 curves
Regulation
Faults
Protection
Display
Operation Push button
Setting (nb curves)6 curves
Regulation ModesΔp-v, 3 speeds
Faults ManagementLED with blinking code
Quick Connection
Atmos PICO 130 (6m)
Atmos PICO 180 (8m)
LED is lit up in green in normal operation
LED lights up/flashes in case of a fault
High starting torque
Minimal consumption from 4W
Automatic deblocking function
Integrated motor protection
Wilo Atmos PICO 130
Wilo Atmos PICO 180
Energy-efficient hot water circulator, suitable for domestic and light commercial applications
Wilo Yonos PICO-Z Circulating Pump
The compact Wilo-Yonos PICO-Z is the ideal replacement pump when switching to energy-saving circulators for domestic hot water applications in detached, semi-detached and multi-family houses. The high-efficiency pump equipped with a thermal insulation shell offers a high-degree of hygienic safety due to its stainless-steel housing. The Wilo-Connector enables quick electrical installation. With the automatic and manual restart as well as the pump venting function, the Wilo-Yonos PICO-Z offers all the standard functions required for reliable operation.
With a slim profile and smooth, white finish, Compact radiators will blend into any room in the house, to provide guaranteed heating performance. Henrad Compact Range has been independently tested to ensure these radiators perform to a maximum working pressure of 10 Bar.
Features + Benefits
Each Henrad radiator is subjected to a multi-stage cleaning and paint process. The final powder coat is Traffic white (RAL 9016) which is stoved and cooled to give a perfect finish
Henrad Compact has 4 x ½” BSP connections as standard, system should be properly flushed and fitted in accordance with the British Code of Practice for the Treatment of Water in Domestic Hot Water Central Heating Systems
Finish – White
Dimensions – See page opposite
Single Convector Type 11
Single Convector Type 21
Double Convector Type 22
Double Convector Type 22
Double Convector Type 22
Single Convector Type 11
Single Convector Type 21
Radiators
Henrad Compact Radiators
1800
400 2091104 5441856 2092204 9583269
500 2091105 6802320 2092205 11984088
600 2091106 8162784 2092206 14374903
700 2091107 9523248 2092207 16775722
800 2091108 10883712 2092208 19166537
900 2091109 12244176 2092209 21567356
1000 2091110 13604640 2092210 23958172
400––– 2182204 15845405
500––– 2182205 19806756
600––– 2182206 23768107
Henrad Column or Verona ranges now available in 55 RAL colours and finishes.
Henrad Compact K3 Radiators
Features + Benefits
The ideal choice for low energy systems, providing outstanding heat output from a smaller footprint
Henrad Compact K3 has 4 x ½” BSP connections as standard
Safety tested to withstand 10 Bar Finish – Traffic white (RAL9016)
Dimensions – See below
Triple Convector Type 33
Radiators
Espada Aluminium Vertical Radiators
Aluminium provides a quick heat up time, allowing for greater efficiency with low water content
Single Vertical Panel
Finish – White or Anthracite Material – Aluminium All heat outputs are shown at 50°C Δt in compliance with BSEN442.
White Finish
HeightWidth Depth End to End Connections Watts Btu/hr
ESAL-V1800218WH 180021866220 6422190
ESAL-V1800366WH 180036666 37010703651
ESAL-V1800514WH 180051466 52014995113
ESAL-V1800662WH 180066266 67019276574
Anthracite Finish
HeightWidth Depth End to End Connections Watts Btu/hr
ESAL-V1800218AT 180021866 2206422190
ESAL-V1800366AT 180036666 37010703651
ESAL-V1800514AT 180051466 52014995113
ESAL-V1800662AT 180066266 67019276574
Double Vertical Panel
Finish
or Anthracite
White Finish HeightWidth Depth End to End Connections Watts Btu/hr
ESAL-VDP1800218WH 180021891.5220 11093783
ESAL-VDP1800366WH 180036691.5 37018496308
ESAL-VDP1800514WH 180051491.5 52025898833
ESAL-VDP1800662WH 180066291.5 670332911358
Anthracite Finish
HeightWidth Depth End to End Connections Watts Btu/hr
ESAL-VDP1800218AT 180021891.5 22011093783
ESAL-VDP1800366AT 180036691.5 37018496308
ESAL-VDP1800514AT 180051491.5 52025898833
ESAL-VDP1800662AT 180066291.5 670332911358
1800 x 520mm Anthracite
1800 x 520mm White
Radiators
Horizontal Radiators
595 x 1200mm White
595 x 1200mm
Single Horizontal Panel
Finish – White or Anthracite
Material – Aluminium
All heat outputs are shown at 50°C Δt in compliance with BSEN442.
Double Horizontal Panel
Finish – White or Anthracite
– Aluminium All heat outputs are shown at 50°C Δt in compliance with BSEN442.
White Finish
HeightWidth Depth Pipe Centres Watts Btu/hr
ESAL-H0440900WH 440900 75870 6802319
ESAL-H04401200WH 44012007511508813006
ESAL-H0588900WH 588900758709063092
ESAL-H05881200WH 588120075115011754009
Anthracite Finish
HeightWidth Depth Pipe Centres Watts Btu/hr
ESAL-H0440900AT 44090075 870 6802319
ESAL-H04401200AT 44012007511508813006
ESAL-H0588900AT 588900758709063092
ESAL-H05881200AT 588120075115011754009
White Finish
HeightWidth Depth Pipe Centres Watts Btu/hr
ESAL-HDP0440900WH 440900 122870 11613960
ESAL-HDP04401200WH 4401200122115015135163
ESAL-HDP0588900WH 58890012287015485281
ESAL-HDP05881200WH 5881200122115020186886
Anthracite Finish
HeightWidth Depth Pipe Centres Watts Btu/hr
ESAL-HDP0440900AT 440900 122870 11613960
ESAL-HDP04401200AT 4401200122115015135163
ESAL-HDP0588900AT 58890012287015485281
ESAL-HDP05881200AT 5881200122115020186886
Anthracite
Espada Vertical Radiators
Single Panel
Finish – White or Anthracite
Material – Mild Steel
All heat outputs are shown at 50°C Δt in compliance with BSEN442.
White Finish
HeightWidth
DepthWatts Btu/hr
ES-V180228WH 1800224714021372
ES-V180376WH 1800376716702286
ES-V180524WH 1800528719383200
ES-V180672WH 18006807112064115
Anthracite Finish
HeightWidth
DepthWatts Btu/hr
ES-V180228AT 1800224714021372
ES-V180376AT 1800376716702286
ES-V180524AT 1800528719383200
ES-V180672AT 18006807112064115
Double Panel
Finish – White or Anthracite
Material – Mild Steel
All heat outputs are shown at 50°C Δt in compliance with BSEN442.
White Finish
HeightWidth
DepthWatts Btu/hr
ES-VDP180228WH 1800224716272139
ES-VDP180376WH 18003767110453566
ES-VDP180524WH 18005287114634992
ES-VDP180672WH 18006807118816418
Anthracite Finish
HeightWidth
DepthWatts Btu/hr
ES-VDP180228AT 1800224716272139
ES-VDP180376AT 18003767110453566
ES-VDP180524AT 18005287114634992
ES-VDP180672AT 18006807118816418
1800 x 680mm White
Double White
Double Panel
Radiators
Espada Horizontal Radiators
Single Panel
Finish – White or Anthracite
Material – Mild Steel
All heat outputs are shown at 50°C Δt in compliance with BSEN442.
White Finish
HeightWidth DepthWatts Btu/hr
ES-H0450090WH 452900634201433
ES-H0450120WH 4521200635521883
ES-H0598090WH 604900635601911
ES-H0598120WH 6041200637362511
Anthracite Finish
HeightWidth DepthWatts Btu/hr
ES-H0450090AT 452900634201433
ES-H0450120AT 4521200635521883
ES-H0598090AT 604900635601911
ES-H0598120AT 6041200637362511
Double Panel
Finish – White or Anthracite
Material – Mild Steel
All heat outputs are shown at 50°C Δt in compliance with BSEN442.
White Finish
HeightWidth DepthWatts Btu/hr
ES-HDP0450090WH 4529001126542231
ES-HDP0450120WH 45212001128582927
ES-HDP0598090WH 6049001128722975
ES-HDP0598120WH 604120011211443903
Anthracite Finish
HeightWidth DepthWatts Btu/hr
ES-HDP0450090AT 4529001126542231
ES-HDP0450120AT 45212001128582927
ES-HDP0598090AT 6049001128722975
ES-HDP0598120AT 604120011211443903
1200 x 604mm
Anthracite
Single Panel
Towel Rails
Tulla Towel Rails
Towel Rails
22mm Straight Towel Rails
Material – Mild Steel All heat outputs are shown at 50°C Δt in compliance with BSEN442
Dimensions –82(h) x 76(w) x 30(d) mm (Angled) 64(h) x 95(w) x 30(d) mm (Straight)
INST-AL030LC Angled Valve
INST-AL031LC Straight Valve
Traditional, Polished Chrome (½” x 15mm – Pair)
Dimensions –110(h) x 115(w) x 46(d) mm
INST-AL034LC Angled Valve
Anthracite (½” x 15mm)
Dimensions –
83(h) x 75(w) x 30(d) mm (Angled)
78(h) x 75(w) x 30(d) mm (Straight)
73(h) x 70(w) x 70(d) mm (Corner)
INCNT003AP-ZAT
Angled Valve
INCNT003ST-ZAT Straight Valve
INCNT023-AT Corner Valve
Gloss White (½” x 15mm)
Dimensions –
83(h) x 75(w) x 30(d) mm (Angled)
78(h) x 75(w) x 30(d) mm (Straight)
INCNT003AP-GW Angled Valve
INCNT003ST-GW Straight Valve
Are you looking to replace or install a new radiator? With a slim profile and smooth, white finish, Henrad Compact and Compact K3 radiators will blend into any room in the house, to provide guaranteed heating performance. Pages 70-73
Instinct Pro and Scalemaster® in-line limescale inhibitors incorporate an active element (magnet or zinc anode) encased in pure copper mesh. The mesh increases the surface area of copper in contact with the water passing through the unit which enhances the electrochemical effect (removal of dissolved oxygen and treatment to prevent limescale precipitation). Only Scalemaster® products use this technology (Patent No. 2285936) which has been proven in independent tests (by British Gas R&D) to extend boiler life typically by 50% by preventing scale build up in hard water areas. The copper mesh – zinc/magnet anode pair reduces the water flow rate through the unit by less than 1%.
Features + Benefits
Easily installed, slip couplings for easy fit No moving parts, no maintenance required
Needs no chemicals or power, earth bonding not required Made in the UK with Scalemaster® patented technology
Single appliance protection
Saves on energy costs
Finish – Green
Dimensions –
130(l)
15mm Electrolytic Scale Inhibitor
Scale Inhibitors
Easily installed, slip couplings for easy fit
22mm
Needs no chemicals or power, earth bonding not required
Electrolytic Scale Inhibitors
Electrolytic Scale Inhibitor
The range of Instinct Pro Scale Inhibitors are manufactured by Scalemaster® in the UK and incorporate the original Scalemaster® patented technology.
Instinct Pro and Scalemaster® in-line limescale inhibitors incorporate an active element (magnet or zinc anode) encased in pure copper mesh. The mesh increases the surface area of copper in contact with the water passing through the unit which enhances the electrochemical effect (removal of dissolved oxygen and treatment to prevent limescale precipitation). Only Scalemaster® products use this technology (Patent No. 2285936) which has been proven in independent tests (by British Gas R&D) to extend boiler life typically by 50% by preventing scale build up in hard water areas.
The copper mesh – zinc/magnet anode pair reduces the water flow rate through the unit by less than 1%.
Features + Benefits
Easily installed, slip couplings for easy fit
No moving parts, no maintenance required
Needs no chemicals or power, earth bonding not required
Made in the UK with Scalemaster® patented technology
Whole house protection
Saves on energy costs
Finish – Blue
Dimensions –
130(l) x 28(d) mm (403342) 136(l) x 32(d) mm (403359)
For homes up to 4 people where space is at a premium
Electronic control system, softener adapts to your Lifestyle, Tablet or Block Salt* can be used (*SL10P only)
Low voltage control system for safety and ease of installation
Finish – White
Dimensions – 532(h) x 270(w) x 480(d) mm
used per regeneration – <75Litres
BWT Softlux 14 Litre Water Softener
Features + Benefits
For homes up to 6 people with multiple bathrooms
Electronic control system, softener adapts to your Lifestyle, Tablet or Block Salt* can be used (*SL14P only)
Low voltage control system for safety and ease of installation
Finish – White Dimensions – 602(h) x 270(w) x 480(d) mm
Water used per regeneration – <80Litres
SL14 With 15mm Install Kit
SL14P With 22mm Install Kit (with 22mm Hi-Flow Hoses)
Features + Benefits
For larger homes up to 8 people with multiple bathrooms
Electronic control system, softener adapts to your Lifestyle, Tablet Salt can be used
Low voltage control system for safety and ease of installation
Finish – White
Dimensions – 804(h) x 270(w) x 480(d) mm Water used per regeneration – <125Litres
BWT Softlux 25 Litre Water Softener
Features + Benefits
For larger homes up to 10 people with multiple
Electronic control system, softener adapts to your Lifestyle, Tablet Salt can be used
Low voltage control system for safety and ease of installation
Finish – White Dimensions – 804(h) x 270(w) x 480(d) mm Water used per regeneration – <145Litres
BWT Bon Aqua 10 Litre Water Softener
Features + Benefits
For homes up to 4 people with multiple bathrooms
Meter controlled, Tablet Salt can be used
Finish – Orange + Black Dimensions – 532(h) x 270(w) x 480(d) mm
Water used per regeneration – <75Litres
CILSOFT45 With 15mm Install Kit
CILSOFT45-NK Without 15mm Install Kit
BWT Bon Aqua 15 Litre Water Softener
Features + Benefits
For homes up to 6 people with multiple bathrooms
Meter controlled, Tablet Salt can be used
Finish – Orange + Black Dimensions – 602(h) x 270(w) x 480(d) mm
used per regeneration – <80Litres
Water Softeners (Non-Electric)
Features + Benefits
For homes up to 2 bathrooms
Low salt and water usage
Tablet or Block Salt can be used
No Electricity Required
Finish – Black + Blue
– 492(h) x 235(w) x 425(d) mm
Scalemaster® Softline SL-Twin Water Softener
Features + Benefits
Twin Tank design gives continuous, uninterrupted soft water
For homes up to 3 bathrooms
Low salt and water usage
Tablet or Block Salt can be used
No Electricity Required
Finish – Grey + Black
– 495(h) x 205(w) x 475(d) mm
used per regeneration – <23Litres
Features + Benefits
For homes up to 2 bathrooms
Low salt and water usage
Tablet or Block Salt can be used
No electricity or separate installation kit required
Finish – Black + Blue
– 470(h) x 240(w) x 483(d) mm
used per regeneration – <18Litres
Features + Benefits
For homes up to 4 bathrooms
Low salt and water usage
Tablet or Block Salt can be used
No Electricity Required
Finish – Black + Blue
– 576(h) x 343(w) x 547(d) mm Water used per regeneration – <25Litres
Introducing the range
Alongside Scalemaster®, a leading supplier of quality water treatment products for over 30 years, Instinct Pro has continued its commitment to product innovation, energy efficiency and the environment with a range of chemical solutions for heating systems.
All 250ml bottles are manufactured from 50% recycled High Density Polyethylene (HDPE)
All 250ml bottles are fully recyclable due to the white caps & security rings
All 250ml bottles will treat a 100 Litre (10 Rad) system
All 250ml bottles are Non-Hazardous formulations
250ml IN-100 Corrosion Inhibitor is NSF CIAS Approved
Ideal for dosing through a system filter
IN-100 in box quantities of 20, all other 250ml products in the range in mixed boxes of 20
Bottles Made from 50% Recycled Plastic
Manufactured in Great Britain
IN-100
Chemicals
Heating System Chemicals
IN-100 Corrosion Inhibitor
Features + Benefits
Prevents corrosion, hard water limescale precipitation
Essential for protecting hot water heating systems and maintaining operational efficiency
The 5 Litre Bottle (504582) is concentrated and will dose 2000 Litres
Dimensions –
250(h) x 55(w) x 55(d) mm (504513)
137(h) x 72(w) x 49(d) mm (504223)
275(h) x 175(w) x 125(d) mm (504582)
504513 300ml Aerosol
504223 250ml Bottle
504582 5 Litre Bottle (Concentrated)
i-Test
Features + Benefits
Provides full annual testing compliance with BS7593:2019 in under 5 minutes.
Works with all chemical inhibitors
Dimensions – 108(h) x 145(w) x 50(d) mm
506104 Kit
506111 10 Replacement Probes
506128 50 Replacement Probes
IN-300 System Cleaner
Features + Benefits
For commissioning new heating systems
Removes installation foulants, flux, grease and debris suspended in water by flushing.
Should be left in system minimum 2 hours, maximum 2 weeks
The 5 Litre Bottle (504599) is concentrated and will dose 2000 Litres
Dimensions –
250(h) x 55(w) x 55(d) mm (504520)
137(h) x 72(w) x 49(d) mm (504247) 275(h) x 175(w) x 125(d) mm (504599)
Rapid Inhibitor Test Strips
Features + Benefits
Rapid testing of central heating inhibitor concentration Works with Instinct inhibitors and all other Nitrate based inhibitors
Dimensions – 85(h) x 45(w) x 40(d) mm
504803 50 Test Strips
Environmentally Friendly
All Instinct Pro Heating System Chemicals are manufactured in the UK by Scalemaster® in a concentrate form, minimising shipping. All 250ml bottles are manufactured from 50% recycled High Density Polyethylene (HDPE) and are fully recyclable due to the white caps and security rings.
Heating System Chemicals
IN-500 Leak Sealer
Features + Benefits
For the internal sealing of inaccessible leaks and weeping joints
Forms a soft seal within 24 hours
Will not cause blockages in circulatory pumps or air vents
x 55(w) x 55(d) mm (504537)
x 72(w) x 49(d) mm (504261)
IN-200 Boiler Noise Silencer Dimensions – 137(h) x 72(w) x 49(d) mm
IN-400 Sludge Remover
IN-700 System Biocide
x
x
Leak Sealer Paste
IN-600 Heat Optimiser
Chemical Filling Kit
Features + Benefits
For use with 250mm + 5 litre bottles, fits all 38mm (38/23) neck bottles
Allows visual checks on flow of liquid
Acute tube bend radius prevents kinks and allows use in tight spaces
Dimensions – 144(h) x 42(w) x 42(d) mm
504278 250ml
Chemicals
Miscellaneous Chemicals
Heavy Duty Drain Cleaner
Features + Benefits
Strong solution which clears drains of grease, oils, fat and hair rapidly
Can be used in domestic and commercial applications
Dimensions – 248(h) x 84(w) x 84(d) mm
504780 1 Litre Bottle
Drain + Toilet Cleaner (Enzyme
Based)
Features + Benefits
Effective enzyme-based treatment to clean and eliminate unwanted odours
Non-acidic, non-caustic, non-bleach and biodegradable
Dimensions – 261(h) x 95(w) x 60(d) mm
504636 750ml Bottle
General Purpose Descaler
Features + Benefits
Multi-purpose, biodegradable, phosphate-free, rapid action de-scaler, no nasty odours
Saves energy
Dimensions – 143(h) x 55(w) x 55(d) mm
504612 250ml Bottle
Inhibited Antifreeze (Concentrated)
Features + Benefits
Long term protection against corrosion and limescale
Use in central heating systems, underfloor heating, heat pumps and solar panels
Dimensions –
275(h) x 175(w) x 125(d) mm (504742) 440(h) x 275(w) x 235(d) mm (504759)
504711 5 Litre Bottle
504728 25 Litre Bottle
Sink + Drain Unblocker (Enzyme Based)
Features + Benefits
Effective enzyme-based treatment for unblocking sinks and drains
Non-acidic, non-caustic, non-bleach and biodegradable
Dimensions – 248(h) x 84(w) x 84(d) mm
504629 1 Litre Bottle
Towel Rail Antifreeze (Pre-Mixed)
Features + Benefits
Protects against burst pipes down to -29°C
Includes added corrosion and limescale inhibitors
Dimensions – 248(h) x 84(w) x 84(d) mm
504773 1 Litre Bottle
Works with all chemical inhibitors
Real-time measurement of corrosion inhibitor protection, on-site, in under 5 minutes!
(For annual testing compliance with BS7593:2019)
Powder Chemicals
BWT Power Crystals Cleaner
BWT Power Crystals are a quick and effective cleaner for all types of wet central heating systems. They offer the power of a liquid in an easy to carry sachet of crystals. Their powerful formula make them ideal for quick and more intensive cleaning when required. They have been developed to remove all debris, sludge, and scale from new and existing closed loop systems. A cleaner system will help restore your heating systems efficiency and reduce boiler noise.
Features + Benefits
Suitable for closed loop, wet central heating systems
Reduced risk from manual handling and reduced risk of contamination from spills (compared to similar liquid products)
Resistant to high and low temperatures
1 dose treats heating systems up to 150 litres
Descales, deoxidises and removes sludge
Fast, clean and convenient to use
Easy to transport, carry, and store
Perfect for new and existing systems
Less plastic, packaging and carbon foot print (per treatment)
Up to 50% more cleaning capacity per pack*
Slow and fast clean in one
POWERCRYSTALSCLEANER
*based on the size of system to be treated when compared to similar products
BWT Power Crystals Protector
BWT Power Crystals are a quick and effective inhibitor and system protector suitable for all types of wet central heating systems. They offer the protection power of a liquid in an easy to carry sachet of crystals. Their powerful formula make them ideal for systems up to 150 litres from a single dose. They have been developed to protect new and existing closed loop systems from scale and corrosion. A cleaner system will help maintain your heating systems efficiency and reduce system noise giving you peace of mind and a warmer home.
Features + Benefits
Suitable for closed loop, wet central heating systems
Reduced risk from manual handling and reduced risk of contamination from spills (compared to similar liquid products)
Helps prevent limescale, corrosion and sludge
Fast, clean and convenient to use
Easy to transport, carry, and store
Perfect for new and existing systems
Less plastic, packaging and carbon foot print (per treatment)
Up to 50% more volume protection per pack*
No risk of messy spills
Magnetic Filters
Manual air vent
12000 gauss removable magnet
Quickly dose without having to drain down the whole system
Actively filters magnetite and non ferrous debris
Built-in drain valve
22mm + 28mm Magnetic Filter (Isolation Valves)
The Instinct ECO-Mag magnetic central heating filter is the ideal solution to help combat against costly and unnecessary system breakdowns caused by both magnetic and non ferrous particulate in fluid based systems. The Instinct ECO-Mag can be used on all types of central heating systems and it is recommended, for maximum effect, that the filter be fitted on the return leg of the system, between the last radiator and the boiler.
Features + Benefits
Magnetic filter, non ferrous filter and manual air separator actively filters magnetite and non ferrous debris
12000 gauss removable magnet
500ml large dosing pot capacity enables installers to quickly dose without having to drain down the whole system
Manual air bleed, even if the filter isn’t serviced, it will never inhibit system performance as its unique connection, aided by full bore isolation valves, means that it will never block
Supplied with a full set of spare sealing washers and O-rings
Full bore isolating ball valves on inlet and outlet connections ensures that full flow is always achieved to maintain system performance
Can be installed anywhere, in any orientation on the pipework saving the installer time and money
Finish – Black
Dimensions –
242(h) x 232(w) x 157(d) mm (INMAG22)
242(h) x 245(w) x 157(d) mm (INMAG28)
INMAG22
INMAG28
22mm Magnetic Filter (Isolation Valves)
28mm Magnetic Filter (Isolation Valves)
MAGFILTOOL Spanner for INMAG Magnetic Filters
Water is guided through the components of the Inta magnetic filter to achieve maximum filtration with each pass of the circuit.
Years on Fernox Magnetic Filter
Magnetic Filters
Take a closer look at the Fernox TF1 Sigma UB Filter features video Specially designed for horizontal installation
Composite under boiler system filter with a brass manifold designed for easy installation in small, restricted areas and with concealed pipework. This high-performance filter can be installed directly under the boiler or in restricted spaces due to the compact, versatile design. The TF1 Sigma UB Filter offers the ultimate in installer choice and provides high efficiency protection against the build-up of system debris.
The Filter has been designed to ensure there is minimal pressure loss in addition to maintaining a high collection efficiency. The filter has been designed to capture a range of system contaminates, whilst also ensuring it cannot block, reduce flow through pipework or impact the performance of the heating system.
The TF1 Sigma UB Filter utilises a range of high-quality component parts that ensure the filter offers optimum performance. The three-way ball valve has been designed to allow users to easily operate by hand, whilst also providing a reliable serving procedure. The filter manifold includes a secure connection to the system and a robust service point allowing the filter to be drained and cleaned. The magnet is made using premium grade neodymium, enabling a high efficiency capture rate, as well as a robust filtration medium that will ensure a continued and consistent level of collection.
Features + Benefits
A high capacity, compact design
Ideal for use in restricted spaces
Integrated three way valve with filter isolation and cleaning functionality
Durable and robust construction, made from a high-quality glass reinforced engineering polymer, and non-porous forged brass
Will not block or restrict flow
Can replace return valve if required for ease of maintenance
Finish – Black
Dimensions – 88(h) x 189(w) x 73(d) mm
Take a closer look at the Fernox
Fernox TF1 Sigma Mini Filter (Suitable with Ideal Instinct2 Combi Boilers)
The TF1 Sigma Mini is a compact high-performance system filter that utilises a powerful neodymium magnet to protect your system against the damaging effects of corrosion. The TF1 Sigma Mini has one of the smallest footprints of any filter in the marketplace, which means it can be easily installed directly below a boiler or in restricted spaces on horizontal or vertical pipework.
Features + Benefits
One of the most compact filters in the market, specifically designed for restricted spaces with as little as 105mm clearance
Easy and quick to install
Designed to ensure there is minimal pressure head loss in addition to maintaining a high collection efficiency, whilst ensuring the filter cannot block
Mess-free, fast and easy servicing via the filter drain point, without the need to dismantle component parts
Finish – Black
Dimensions – 75(h) x 173(w) x 128(d) mm
TF1 Sigma Mini Filter features video
Easy to service and clean via the drain valve
Will not block or restrict flow
22mm compression connection
62708
Fernox TF1 Sigma Mini 22mm
Consumables
Sawing +
Radiators
Taps + Stopcocks
Compression Fittings + Immersion Heaters
Boilers, Flues + System Testing
Wrenches + Spanners
Miscellaneous Detection
Servicing Essentials
Aerosol, Grease + Solutions
PPE + Cleaning
Consumables Features
There are many features in our Instinct Pro Consumables range. Use the icons to help choose the right option for you.
App Control The ROMAX COMPACT III is ROTHENBERGER’s first smart press machine with Bluetooth connectivity. Via the ROTHENBERGER app, tool and smartphone can be connected, providing the user real-time access to relevant machine and press data.
Press Tools
New Jaw Lock System
New Jaw Locking System allows convenient Attaching/Detaching of Press Jaws
Use bonus points that are packaged with the Compact III at www.rothenberger.com/gb-en/bonus-programme/ to claim a new battery FOC
R-System Label
Jaw matching indicator reduces misuse risk of attaching incompatible jaws
Gain access to your COMPACT III and read out relevant Tool & Press Data via Smartphone in Real-Time
Balanced Design Optimized in weight and size for better machine handling in daily use
Multiple battery systems Suitable for AMPShare or CAS battery systems
Perfectly balanced centre of gravity allows for comfortable work
Bluetooth® inside Connects the machine with ROTHENBERGER App
Take a closer look at the ROMAX Compact lll features video, scan to find out more
The ROMAX Compact III is 3 seconds fast, 2.5kg light and 19kN strong. Through the perfect handling, the machine is particularly suitable for domestic installations, high volume pressings or service installations.
Features + Benefits
Connected – Real-Time Data Gathering of Pressing Data and Creation of Job Reports via ROTHENBERGER App. Remote locking.
Fast – thanks to turbo pressure a pressing takes only 3 seconds
Strong – presses metal fittings up to Ø 35mm and multilayer up to Ø 40mm
Handy – perfectly balanced, the centre of gravity is where the user holds the tool
Small + lightweight – with 34cm in length, the ROMAX Compact lll weighs just 2.5kg
Tool Servicing – The first service is free!
Finish – Black / Red
Dimensions
With just 2.5 kg of weight, overhead jobs will be effortless even over an extended period of time
Press Jaw System Press Jaw Compact Piston Force 19kN
Take a closer look at the SweatBOX® features video
MONUMENT TOOLS
MONUMENT TOOLS
Monument Masters SweatBOX®
The SweatBOX® is the ultimate plumbers soldering tray. The SweatBOX® features a flame retardant engineering grade plastic with a patented clamp for holding different sizing of copper pipe up to 22mm or ¾”.
There is a silicone strip edge to the SweatBOX® ensuring heat is not conducted from the hot copper pipe to the plastic of the SweatBOX® or the clients property. Adhesive rubber feet are included, helping to prevent scratches to surfaces. The sealed compartments are ideal for holding a gas bottle, separated blowtorch and all the essentials needed for soldering or sweating a joint. There’s even a compartment for flux brushes. Finish – Yellow
Dimensions – 435(h) x 330(w) x 240(d) mm
MAST20201L
Guarantees Year on Plumbing Tools
Soldering + Brazing
Omat® Soldering + Brazing Pad
250mm (10”) Soldering + Brazing Pad
The INST2361 OMAT® is a patented, slotted protection mat for soldering pipes and tubes to protect walls, cables, carpets and other flammable material. The OMAT® slot has an overlap at the back which enables the protective mat to go either side of the tube or pipe being soldered so as to protect the surrounding area from burning or scorching as well as reducing the risk of fire. It is particularly useful under kitchen units and on pipes perpendicular to the wall where the use of a non-slotted mat would not easily cover the area. The OMAT® is designed for use on pipes and tubes 15 to 22mm diameter.
150mm (6”) Soldering + Brazing Pad
A patented, slotted protection mat or pad for soldering and brazing 15mm and 22mm copper tube and pipe. The size of the mat is 150mm x 150mm (6” x 6”) for use in really awkward places where the larger sizes of Omat® would obstruct easy access of the soldering torch. It is designed to protect walls, cables, carpets and other flammable material surrounding a pipe being soldered/brazed. The slot in the Monument 2363L Micro Omat® has an overlap at the back which enables the protective mat to go either side of the tube or pipe being soldered/brazed so as to protect the surrounding area from burning or scorching, as well as reducing the risk of fire. It is particularly useful under kitchen units and on pipes perpendicular to the wall where the use of a non-slotted mat would provide inadequate cover of the area to prevent damage.
Quantity – 1
Dimensions –
240(h) x 240(w) x 5(d) mm (INST2361)
155(h) x 155(w) x 5(d) mm (INST2363)
INST2361 Omat® 250mm (10”) Soldering + Brazing Pad
INST2363 Omat® 150mm (6”) Soldering + Brazing Pad
300mm (12”) Soldering + Brazing Pad
Quantity – 1 of Each
Plumbing Tools
Plumbing Tools
Monument Masters + Bending
15mm Pipe Bender
(With INST1715 15mm Copper Pipe Cutter)
The Pipe Bender is a single sized pipe bender for 15mm copper pipe (0.7mm wall).
Features + Benefits
Less fiddly – with the integrated hook and nylon guide, the integrated hook stop won’t flop from side to side and the guide(s) won’t fall out
Lighter in the hand than a combi – the pipe bender weighs 1.9kg
Less cumbersome – you are only using a bender for the size of pipe being bent
Better sight lines – as the bend is in the same plane as the arms of the bender it is easier to line up by eye Smaller than a combi – the pipe bender has an arm length of 40cm approx. (a combi arm length is 65cm). It even fits in a tool bag
The INST2600 15mm and 22mm Copper Pipe Bender is designed to professionally bend BSEN1057 15mm and 22mm copper pipe and 15mm stainless steel tube. The aluminium formers are marked with bending angles of 30, 45 and 90 degree offsets allowing for accurate bending. The Instinct Pro Pipe Bender is supplied with replaceable 15mm and 22mm aluminium bending guides.
Quantity – 1
Dimensions – 700(h) x 135(w) x 155(d) mm
INST2600
15mm Copper Pipe Bender Guide
Quantity – 1
Dimensions – 165(h) x 20(w) x 15(d) mm
INST2601
22mm Copper Pipe Bender Guide
Quantity – 1
Dimensions – 230(h) x 22(w) x 25(d) mm
INST2603
Guarantees
Year on Plumbing Tools
Copper Pipe Cutting + Deburring
10mm Copper Pipe Cutter
Quantity – 1
Dimensions – 45(h) x 45(w) x 30(d) mm
INST1810N
Plumbing Tools
15mm Autocut® Copper Pipe Cutter
Quantity – 1 Dimensions – 50(h) x 50(w) x 30(d) mm
INST1715
22mm Autocut® Copper Pipe Cutter
Quantity – 1 Dimensions – 58(h) x 58(w) x 30(d) mm
INST1722
28mm Autocut® Copper Pipe Cutter
Quantity – 1
Dimensions – 65(h) x 65(w) x 30(d) mm
INST1728
15mm + 22mm Autocut® Copper Pipe Cutters
(Restricted Access Handles)
The Restricted Access Handles are designed as an aid for rotating the INST1715 + INST1722 in confined spaces where the users’ hands will not fit. Made from bright zinc plated steel the handles engage in the outer casing of the INST1715 + INST1722. They are designed to be easily slipped on and off of the cutter body from either side of the pipe cutter, even when it is engaged on the pipe to be cut.
Quantity – Pack of 2
Dimensions – 170(h) x 70(w) x 30(d) mm
Spare Wheels (Autocut® + Pipeslice®)
Quantity – Pack of 2
Dimensions – 35(h) x 40(w) x 40(d) mm
INST0269
15mm + 22mm Autocut® Copper Pipe Cutter
Quantity – 1
Dimensions – 55(h) x 55(w) x 40(d) mm
INST17151722
Plumbing Tools
Copper Pipe Cutting + Deburring
Size 3mm-22mm Copper Pipe Cutter
Quantity – 1 Dimensions – 45(h) x 70(w) x 30(d) mm
35mm Internal + External Pipe Deburrer
Quantity – 1
Dimensions – 75(h) x 45(w) x 45(d) mm
15mm + 22mm Copper Pipe + Fitting Brush
Quantity – 1
Dimensions – 195(h) x 45(w) x 30(d) mm
INST3033
Size 4mm-28mm Copper Pipe Cutter
Quantity – 1 Dimensions – 185(h) x 55(w) x 30(d) mm
INST0265
12-54mm Inside/Outside Deburrer
Quantity – 1 Dimensions – 85(h) x 65(w) x 65(d) mm INST0374
Deburring Tool
Quantity – 1 Dimensions – 143(h) x 15(w) x 10(d) mm
INST3020
Size2A 12mm-43mm Copper Pipe Cutter
Quantity – 1 Dimensions – 220(h) x 65(w) x 40(d) mm
INST0266
Spare Wheel (Size 0-1-2A Copper Pipe Cutters)
Quantity – Pack of 2 Dimensions – 40(h) x 55(w) x 55(d) mm
Dimensions –255(h) x 40(w) x 10(d) mm (INST3024) 140(h) x 60(w) x 40(d) mm (INST3024-6)
INST3024 Cleaning Abrasive Strips
INST3024-6 3m Rolls of Cleaning Abrasive Strips
Year on Plumbing Tools
Plastic Pipe Cutting
Plumbing Tools
6-28mm Plastic Pipe Cutter
Quantity – 1 Dimensions – 195(h) x 70(w) x 20(d) mm INST2644
15mm + 22mm Autocut® (Plastic Pipe Cutter)
Quantity – 1
Dimensions –
75(h) x 75(w) x 40(d) mm (INST0115)
70(h) x 70(w) x 40(d) mm (INST0122)
INST0115 15mm
INST0122 22mm
Burrfect Square Plastic Waste Pipe Deburrer
Quantity – 1 Dimensions – 80(h) x 80(w) x 3(d) mm
INST2116
1¼” + 1½” Autocut® (Plastic Waste Pipe Cutter)
Quantity – 1
Dimensions –
70(h) x 70(w) x 50(d) mm (INST1114)
70(h) x 70(w) x 55(d) mm (INST1112)
20-42mm Plastic Pipe Cutter
Quantity – 1 Dimensions – 220(h) x 125(w) x 25(d) mm
INST2645
Spare Blades for Autocut® (Plastic Pipe Cutter)
Quantity – Pack of 5
Dimensions – 50(h) x 50(w) x 5(d) mm
INST0100
Take a closer look at the Autocuts tool in action!
Plumbing Tools
Sawing + Cutting
300mm (12”) Hacksaw
The INST1921D 300mm (12”) Hacksaw has a die-cast aluminium handle and square section tubular steel frame,which combine to give a lightweight hacksaw with great tensile strength. Adjusts to give 45° angle for flush cutting.
Quantity – 1
Dimensions – 440(h) x 140(w) x 20(d) mm INST1921D
Junior Hacksaw
Quantity – 1 Dimensions – 245(h) x 75(w) x 10(d) mm
INST2000
Folding Knife
Quantity – 1
Dimensions – 75(h) x 55(w) x 10(d) mm
INST1023
Standard Trapezoidal Knife Blades
The INST1024 Pack of Ten Standard Trapezoidal Knife Blades. Trimming knife blades are suitable for the trade trimming knife. Supplied in a dispenser.
Quantity – Pack of 10
Dimensions – 65(h) x 65(w) x 20(d) mm
300mm (12”) Hacksaw Blades
Quantity – Pack of 3
Dimensions – 310(h) x 40(w) x 3(d) mm
INST1923
Dimensions – 160(h) x 35(w) x 10(d) mm
INST1120
Six Flat Bits
Quantity – Pack of 6
Dimensions – 155(h) x 50(w) x 20(d) mm
INST1950
Guarantees
Year on Plumbing Tools
Radiators
Universal Radiator Valve Spanner
Quantity – 1
Dimensions – 110(h) x 40(w) x 20(d) mm
INST2052
Radiator Step Wrench + Ratchet
Quantity – 1 Dimensions – 275(h) x 45(w) x 30(d) mm
INST2048
Four-Way Multipurpose Key
Quantity – 1
Dimensions – 75(h) x 75(w) x 20(d) mm
INST2059
Are you looking to replace or install a new radiator?
With a slim profile and smooth, white finish, Henrad Compact and Compact K3 radiators will blend into any room in the house, to provide guaranteed heating performance. Pages 70-73
TRV Tail Driver
Quantity – 1
Dimensions – 60(h) x 30(w) x 30(d) mm
INST2166
Plumbing Tools
½, ¾ + 1” Lockshield Radiator Valve Key
Quantity – 1 Dimensions – 85(h) x 85(w) x 20(d) mm
Quantity – 1 Dimensions – 220(h) x 45(w) x 40(d) mm
INST0331
Parallel Bush Tap Reseater (Three Cutters)
Quantity – 1
Dimensions – 135(h) x 40(w) x 50(d) mm
INST0450
Pro Adjustable Basin Wrench (Two Jaws)
Quantity – 1
Dimensions – 255(h) x 90(w) x 80(d) mm
INST0345
8mm-13mm Monobloc Box Spanners
Quantity – Set of 3
Dimensions – 185(h) x 45(w) x 20(d) mm
INST3240
27 x 32mm Tap Back Nut Box Spanner
Quantity – 1
Dimensions – 157(h) x 40(w) x 40(d) mm
INST0319
Malleable Cast Basin Back Nut Wrench
Quantity – 1
Dimensions – 260(h) x 27(w) x 45(d) mm
INST0327
Guarantees
Year on Plumbing Tools
Compression Fittings + Immersion Heaters
Compression Fitting Nut Spanners
Quantity – Pack of 2
Dimensions – 160(h) x 55(w) x 10(d) mm
INST2042
Box Ring Immersion Heater Spanner
Quantity – 1 Dimensions – 295(h) x 50(w) x 30(d) mm
Additionally there is a power tool drive to make this indispensable tool even more useful!
Just remember to have your drill set to drive not reverse.
22mm Compression Fitting Olive Cutter
Quantity – 1
Dimensions – 192(h) x 55(w) x 25(d) mm
INST2031
Plumbing Tools
Pro Cast Immersion Heater
Spanner 86mm A/F
Quantity – 1 Dimensions – 250(h) x 110(w) x 50(d) mm
INST0361
15mm + 22mm Compression
Fitting Olive Puller
The INST2036 works by engaging the tool in the end of the copper pipe and then winding the appropriate bush - 15mm and 22mm included - counter clockwise until it stops at the olive to be removed. The threaded bush is then screwed into the compression nut which is held captive on the pipe on the other side of the olive. Then by rotating the handle clockwise the compression fitting nut is drawn up the pipe and pulls the olive off the pipe without damaging it.
Quantity – 1 Dimensions – 150(h) x 60(w) x 40(d) mm
INST2036
15mm Compression Fitting Olive Cutter
The INST2030 15mm and INST2031 22mm are designed to remove an olive from copper pipe without damage to the pipe and without producing swarf. The latest version includes replaceable, interchangeable and reversible tungsten carbide blades. Please note – Not for use on steel olives.
Quantity – 1 Dimensions – 195(h) x 55(w) x 20(d) mm
INST2030
INST0358
Plumbing Tools
Boilers, Flues + System Testing
30mb Gas Test Gauge
The INST0257 30mb Gas Test Gauge is Made in Britain and is made from tough plastic. It is used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusions. Marked in millibars, the scale adjusts for zeroing the water level.
Quantity – 1
Dimensions – 550(h) x 75(w) x 30(d) mm
Dry Test Kit 15mm x 4 Bar
The INST1512 Pipe Dry Testing Kit is ideal for dry testing pipe work during and after installation. It has an easy to read triple scale bar, psi and kPa and is suitable for water, air, gas and petroleum oil pipes up to 4 bar, and for testing combi systems. Can be left on test, while flooring is laid to reveal any nail damage also test hot and cold supplies separately to ensure pipes are not crossed. Fitted with a Schrader Valve and 15 mm push fit fitting for quick and easy assembly and has a rubber boot for added protection.
Quantity – 1
Dimensions – 130(h) x 55(w) x 30(d) mm
INST1512
Mains Water Pressure Test
Gauge 11 Bar x ¾” BSP
Quantity – 1 Dimensions – 285(h) x 55(w) x 40(d) mm
INST1510
Flue Brushes
Quantity – Pack of 3
–
INST3014
15mm + 22mm Pipe End Plugs
Quantity – 1 of Each Dimensions – 65(h) x 65(w) x 20(d) mm
15m Drain Down Hose
Quantity – 1
2m Spare Gas Test Gauge Hose (LPG)
Quantity – 1
–
x
x
INST1731
on Plumbing Tools
Wrenches + Spanners
Wide Jaw Adjustable Wrench
Quantity – 1
INST3140 150mm (6”) 34mm Cap
INST3141 200mm (8”) 38mm Cap
INST3143 250mm (10”) 50mm Cap
Miscellaneous
Tape Measure (Backing Card) Quantity – 1
Thin Jaw Adjustable Wrench
Quantity – 1
INST4140
(6”) INST4141
Plumbing Tools
Mongoose One Handed Slip Joint Pliers
Quantity – 1 INST2071
D-End Manhole Lifting Keys Quantity
(8”) INST41499
(6”) +
(8”) Twinpack
Screwdriver
Quantity – 1
x
(18”) Flat Head Screwdriver
(12”) No.2 Phillips Screwdriver
Handy Plunger
Quantity – 1
(7”) INST2072
(10”) INST2073
20ft Drain Cleaner
Quantity – 1
Toilet Plunger Quantity – 1
(12”)
Plumbing Tools
Detection
SleepSafe Photoelectric Smoke Alarm
Quantity – 1 Dimensions –110(h) x 110(w) x 50(d) mm
Servicing Essentials
Collapsible Bucket (10 Litre)
Quantity – 1
Dimensions – 50(h) x 330(w) x 345(d) mm
CWB10L
Collapsible Bucket (20 Litre)
Quantity – 1
Dimensions – 30(h) x 310(w) x 150(d) mm
SleepSafe Carbon Monoxide Alarm (10 Year)
Quantity – 1 Dimensions –110(h) x 115(w) x 35(d) mm COA10
Medium Grade Steel Wool (450g)
Quantity – 1
Dimensions – 90(h) x 90(w) x 380(d) mm
WB28
Steel Wool
Quantity – Pack of 8
Dimensions – 53(h) x 140(w) x 210(d) mm
WB8
Arctic Access Panel
Quantity – 1
Panels to fit following opening dimensions –
150(h) x 230(w) mm (APS150)
200(h) x 200(w) mm (APS200)
300(h) x 300(w) mm (APS300)
Plumbing Tools
Servicing Essentials
Work Mat
Quantity – 1
Dimensions –
180(h) x 70(w) x 114(d) mm (WM1)
240(h) x 80(w) x 150(d) mm (WM2)
300(h) x 70(w) x 225(d) mm (WM3) WM1
Cotton Dust Sheet (12’ x 9’)
Quantity – 1
Dimensions – 545(h) x 464(w) x 28(d) mm
AD62822
Blue Hard Floor Protector
Quantity – 1
Dimensions –
600(h) x 67(w) x 67(d) mm (HFP1)
600(h) x 105(w) x 105(d) mm (HFP1-50M)
HFP1
HFP1-50M
Aluminium Foil Tape (50mm x 45m)
Laminated Dust Sheet (12’ x 9’)
Quantity – 1
Dimensions – 430(h) x 520(w) x 20(d) mm
A666013
Carpet Protector
Quantity – 1
Dimensions –
600(h) x 70(w) x 70(d) mm (CP1)
600(h) x 105(w) x 105(d) mm (CP1-50M)
x 25m
x 50m
CP1
CP1-50M
600mm x 25m
600mm x 50m
x
Quantity – 1
Dimensions – 122(h) x 122(w) x 48(d) mm
A662021
General Purpose Cloth Tape (50mm x 50m)
Quantity – 1
Dimensions – 132(h) x 132(w) x 50(d) mm
A662020
Plumbing Tools
Aerosol, Grease + Solutions
Silicone Grease + Spray
Quantity – 1
Dimensions –
157(h) x 57(w) x 57(d) mm (A665016)
48(h) x 70(w) x 70(d) mm (A665016-TUB)
A665016 100g Tube
665016-TUB 100g Tub
Dimensions –110(h) x 103(w) x 103(d) mm (A665017)
183(h) x 60(w) x 60(d) mm (PH040)
A665017 500g Tub
PH040
Air Duster Spray (120ml + 300ml)
Quantity – 1
Dimensions –
165(h) x 65(w) x 65(d) mm (ZE29)
201(h) x 65(w) x 65(d) mm (ZE294)
ZE29
400ml Silicone Spray
Leak Detector Fluid (250ml)
Quantity – 1
Dimensions –
130(h) x 60(w) x 60(d) mm (PH026)
160(h) x 60(w) x 60(d) mm (PH026A) PH026
(Brush On)
(Atomiser)
Pipe Cement (125ml + 250ml)
Quantity – 1
Dimensions –
75(h) x 55(w) x 55(d) mm (PVCC125)
88(h) x 75(w) x 75(d) mm (PVCC250)
Leak Detector Spray (400ml)
Quantity – 1
Dimensions – 238(h) x 65(w) x 65(d) mm
PH020
Plumbing Tools
PPE + Cleaning
Blue Paper Roll (3Ply)
Quantity – 1
Dimensions – 253(h) x 125(w) x 125(d) mm
A445031
Puggy Work Gloves
Quantity – 1
Dimensions – 362(h) x 136(w) x 33(d) mm
445036M Medium
A445036 Large
445036XL XLarge
Heavy Duty Dirty Scrubbers Wipe (80 Pack)
Quantity – 1 Dimensions – 245(h) x 110(w) x 110(d) mm
DSW80
Plain Grip Gloves (6g)
Quantity – Box of 100
Dimensions – 241(h) x 125(w) x 65(d) mm
AHPGG6GM Medium
AHPGG6GL Large
AHPGG6GXL XLarge
21” x 29” Black Rubble Sacks (10 Roll)
Quantity – 1
Dimensions – 275(h) x 60(w) x 60(d) mm
Diamond Grip Gloves (8g)
Quantity – Box of 50
Dimensions – 235(h) x 126(w) x 65(d) mm
AHDGG8GM Medium
AHDGG8GL Large
AHDGG8GXL XLarge
Microfibre Cloth Range
Our multi-purpose cleaning cloths are highly absorbent, lint-free, and perfect for any surface—metal, plastic, wood, ceramics, glass, and more.
Dimensions –
145(h) x 55(w) x 205(d) mm (MFCBOX5)
150(h) x 45(w) x 300(d) mm (MFCBOX12)
300(h) x 100(w) x 100(d) mm (MFCROLL30)
145(h) x 155(w) x 310(d) mm (MFCBOX50)
BRS1
Pre-Packed Fittings
12” Oval Link Chain (Chrome) (Stay)
Quantity – 1
Dimensions – 340(h) x 60(w) x 2(d) mm 200082-INS
O Rings (Basin + Bath Plugs)
Quantity – 1 (5 x Basin + 5 x Bath)
Dimensions – 325(h) x 2(w) x 2(d) mm 200666-INS
1½” Poly Plug (Black) (Triangle)
Quantity – 2
Dimensions – 15(h) x 38(w) x 38(d) mm 200833-INS
1¾” Bath Plastic Plug (White)
Quantity – 2
Dimensions – 21(h) x 43(w) x 43(d) mm
200844-INS
18” Bath Ball Chain (Chrome) (S Hook CP)
Quantity – 1
Dimensions – 458(h) x 3(w) x 3(d) mm 200111-INS
Brass Basin Plug (Chrome) (Triangle)
Quantity – 1 Dimensions – 13(h) x 38(w) x 38(d) mm 200716-INS
1¾” Poly Plug (Black) (Triangle)
Quantity – 2
Dimensions – 15(h) x 45(w) x 45(d) mm 200837-INS
1½” Pop Up Plug Only (Chrome)
Quantity – 1 Dimensions – 72(h) x 40(w) x 40(d) mm 200867-INS
18” Oval Link Chain (Chrome) (S Hooks)
Quantity – 1
Dimensions – 470(h) x 2(w) x 6(d) mm 200128-INS
Brass Bath Plug (Chrome) (Triangle)
Quantity – 1 Dimensions – 14(h) x 43(w) x 43(d) mm
200739-INS
1½” + 1¾” Poly Plug Kit (Black)
Quantity – 1 (1 of each Plug)
Dimensions – 15(h) x 90(w) x 120(d) mm 200839-INS
Tap Hole Stopper Abs (Chrome)
Quantity – 1
Dimensions – 32(h) x 50(w) x 50(d) mm 201051-INS
12” Basin Ball Chain (Chrome) (Metal Stay CP)
Quantity – 1
Dimensions – 300(h) x 2(w) x 23(d) mm
200147-INS
Basin Poly Plug (Black) (12” Ball Chain + Stay)
Quantity – 1
Dimensions – 80(h) x 60(w) x 14(d) mm
200764-INS
1½” Plastic Basin Plug (White)
Quantity – 2
Dimensions – 21(h) x 38(w) x 38(d) mm
200842-INS
Domed Chain Hole Stopper (Chrome)
Quantity – 1
Dimensions – 41(h) x 13(w) x 13(d) mm
201052-INS
Guarantees
Year on Pre-Packed Fittings
Rubber Washer (Sink Waste)
Quantity – 5
Dimensions – 1.5(h) x 84(w) x 84(d) mm
201230-INS
Brass Basin Plug (Chrome) 12” Ball Chain + Stay
Quantity – 1
Dimensions – 15(h) x 80(w) x 120(d) mm
201924-INS
Contract Cistern Lever
Quantity – 1
Dimensions – 150(h) x 34(w) x 119(d) mm
202298-INS
Cone Washer (Bottom Entry Float Valve)
Quantity – 2
Dimensions – 6(h) x 38(w) x 38(d) mm
306290-INS
Rubber Washer (Basin Waste)
Quantity – 5 Dimensions – 1.5(h) x 60(w) x 60(d) mm 201231-INS
Brass Bath Plug (Chrome) 18” Ball Chain + S Hook
Quantity – 1
Dimensions – 16(h) x 80(w) x 120(d) mm 201925-INS
Seal (Clicker Waste 201753 201773)
Quantity – 2
Dimensions – 4(h) x 37(w) x 37(d) mm 202510-INS
Torbeck Valve Washers
Quantity – 1 Dimensions – 17(h) x 30(w) x 30(d) mm
306492-INS
Pre-Packed Fittings
Rubber Washer (Bath Waste)
Quantity – 5 Dimensions – 3(h) x 62(w) x 62(d) mm 201233-INS
Tap Hole Stopper (White)
Quantity – 1 Dimensions – 32(h) x 50(w) x 50(d) mm
202118-INS
O Ring (Basin Mushroom Clicker Waste 201314)
Quantity – 2
Dimensions – 4(h) x 40(w) x 40(d) mm 202515-INS
HydroFlo Black Rubber Diaphragm Washer
Quantity – 1 Dimensions – 14.5(h) x 28(w) x 28(d) mm
345366-INS
Seal Kit (Basin Waste)
Quantity – 1
Dimensions – 22(h) x 68(w) x 68(d) mm
201686-INS
Bath Poly Plug (Black) (18” Ball Chain)
Quantity – 1
Dimensions – 15(h) x 60(w) x 80(d) mm
202255-INS
Rubber MT Cock Washer
Quantity – 5
Dimensions – 2(h) x 13(w) x 13(d) mm
303396-INS
Part 2 Ball Valve Washer
Quantity – 5 Dimensions – 6(h) x 32(w) x 32(d) mm
306730-INS
Pre-Packed Fittings
½” Plastic Piston Pack
Quantity – 2
Dimensions – 32(h) x 16(w) x 16(d) mm
306810-INS
5/8” Flat Tap Washer
Quantity – 2
Dimensions – 5(h) x 22(w) x 22(d) mm
½” HP Plastic Seat
Quantity – 5 Dimensions – 16(h) x 22(w) x 22(d) mm
306816-INS
Dome Tap Washers
Quantity – 2
Dimensions –7(h) x 17(w) x 17(d) mm (306882-INS) 10(h) x 23(w) x 23(d) mm (306884-INS)
306882-INS
306884-INS
Vacca Washer Flat
Quantity – 10
Dimensions –
5(h) x 16(w) x 16(d) mm (306940-INS)
5(h) x 19(w) x 19(d) mm (306942-INS)
5(h) x 22(w) x 22(d) mm (306944-INS)
5(h) x 25(w) x 25(d) mm (306946-INS)
½” Red Fibre Seating Washer (Float Valve)
Quantity – 5 Dimensions – 1.5(h) x 22(w) x 22(d) mm
306832-INS
Delta Tap Washers
Quantity – 5 Dimensions –5(h) x 16(w) x 16(d) mm (306886-INS) 5(h) x 18(w) x 18(d) mm (306888-INS)
306886-INS
306888-INS
½” Part 1 Cotter Pin
Quantity – 5
Dimensions – 34(h) x 7(w) x 3(d) mm
306850-INS
Pillar Tap Washer
Quantity – 10
–
306924-INS
x
306880-INS Straight Boiler Filling Loop
15mm (Chrome) Snappit
Cover 200mm
Quantity – 10
Dimensions – 30(h) x 15(w) x 19(d) mm
317274-INS
Pegler Washer Flat
Quantity – 5 Dimensions –4(h) x 16(w) x 16(d) mm (306950-INS) 4(h) x 18(w) x 18(d) mm (306952-INS)
306950-INS ½”
306952-INS
Chrome Pipe Covers + Floor Plate
Quantity – 2 of Each
Dimensions – Please request
317290-INS
½” Directional Air Vent + ½” Plug Kit (Chrome)
Quantity – 1 of Each
Dimensions – 19(h) x 24(w) x 24(d) mm
313580-INS
307413-INS
Brass Clock Radiator Key
– 1
313713-INS
Guarantees
Year on Pre-Packed Fittings
(Part L Approved) 15mm
Quantity – 1
Dimensions – 500(h) x 45(w) x 25(d) mm
307425-INS
Brass Olives
Quantity –
Pre-Packed Fittings
Copper Olives
Quantity –
Flexible Tap Connector
Quantity –
Filling Loop Straight with Gauge (Part L Approved) 15mm
Sign up to Pochin Points by visiting your local branch and your spend on qualifying products will automatically start earning you points.
For every £100 spent you’ll receive 10 points, with no cap on the amount you can earn. Points will be updated each calendar month.
Choose from a selection of brands, retailers and experiences to spend your points on. You will be able to view all these through your Pochin Points account.
