P40 & P40 NACE Regulators • • • • • • • •
A
DIVISION
OF
MARSH
BELLO F R AM
Superior regulation characteristics Rugged, corrosion-resistant construction Economical Self-relieving Standard tapped vent Excellent stability and repeatability Soft relief seat on P40 Several mounting options
The BelGAS General Purpose P40 & P40 NACE Filter Regulators are reliable precision units designed for instrumentation and general purpose use in both standard environments (P40), and corrosive environments (P40 NACE). The P40 NACE complies with NACE material requirement MR0175 for sulfide stress cracking resistant metallic material for oil field equipment. Test data for these regulators show excellent performance characteristics compared with those of similar units presently on the market. These BelGAS regulators are generally superior in regulated pressure vs. flow, forward-to-reverse flow offset, supply pressure sensitivity, repeatability and stability. Ruggedly designed and constructed, the regulators have housings of diecast aluminum. The P40 Regulator is finished with vinyl paint (which resists scratching, weathering & other physical abuse), while the P40 NACE is supplied with an epoxy paint for added corrosion protection. Both the P40 and P40 NACE, are pressure and leak tested prior to shipment from the factory.
P40 & P40 NACE Part Matrix P040
0 2
0 0 0 Versions
0
Standard*
N
NACE** Spring Range
The full flow gauge port is convenient for gauge installation and can also be used as an additional full flow outlet.
010
0-10 PSIG
035
0-35 PSIG
Applications
060
0-60 PSIG
The design of these regulators is especially well suited to pilot-operated level, pressure and flow controllers and instruments.
120
0-120 PSIG Options 00
Standard
0K
Knob Adjustment
*
Standard P40 is a Soft Relief Seat unit. Max Gas Consumption is 0.1 SCFH.
**
The P40 NACE has a metalon-metal relief seat. Max Gas consumption is 6 SCFH.
P40 Gas Regulator
Pressure Out PSIG BAR 90 6.2
Supply Pressure 100 PSIG The P40 NACE is available for use
80 5.5
in corrosive environments.
70 4.8
This complies with NACE material
60 4.1
requirement MR0175 for sulfide
50 3.4
stress cracking resistant metallic
40 2.8
material for oil field equipment.
30 2.1 20 1.4 10 0.7 0 0 SCFM 0 5 LPM 0 142 Gas Flow (SCFM @ 0.6 Specific Gravity)
belgas.net
10 283
15 425
20 566
25 708
0-30 psig
30 850
0-60 psig
35 991
40 1133
0-120 psig
< 63 >
P40 & P40 NACE Specifications P40 Regulator
P40 NACE Regulator
1" ( 25.4 mm) Water Column
1" ( 25.4 mm) Water Column
20 SCFM ( 565 LPM)
20 SCFM (565 LPM)
< 0.2 PSIG (0.01 BAR)
< 0.2 PSIG (0.01 BAR)
0.1–0.45 SCFM Typical (2.8–12.7 LPM)
0.1–0.45 SCFM Typical (2.8–12.7 LPM)
250 PSIG (17.2 BAR)
250 PSIG (17.2 BAR)
4 PSIG ( 0.3 BAR) over flow 10 SCFM ( 283 LPM) (1⁄4 NPT, 20 PSIG / 1.4 BAR set point)
4 PSIG ( 0.3 BAR) over flow 10 SCFM ( 283 LPM) (1⁄4" NPT, 20 PSIG / 1.4 BAR set point)
0-10 PSIG (0-0.7 BAR), 0-35 PSIG (0-2.4 BAR) 0-60 PSIG (0-4.1 BAR), 0-120 PSIG (0-8.3 BAR)
0-10 PSI (0-0.7 BAR), 0-35 PSIG (0-2.4 BAR) 0-60 PSIG (0-4.1 BAR), 0-120 PSIG (0-8.3 BAR)
0 to 160˚F (-18 to 71˚C)
0 to 180˚F (-15 to 82˚C)
0.1 SCFH (0.05 LPM)
6 SCFH (2.8 LPM)
Sensitivity Flow Capacity Effect of Supply Pressure variation (25 PSIG) on Outlet Pressure Exhaust Capacity (5 PSIG above 20 PSIG set point) Maximum Input/Supply Pressure Effect of Changes in Flow on Regulated Pressure (100 PSIG/6.9 BAR Supply) Output Pressure Ranges Temperature Range Total Air Consumption @ Maximum Output Port Size Size Weight 73.2 2.875
Materials of Construction Mounting
1⁄4 NPT
1⁄4 NPT
2.5" X 2.5" X 5.63" (63.5 X 63.5 X 143 mm)
2.5" X 2.5" X 5.63" (63.5 X 63.5 X 143 mm)
0.82 lb. (.37 kg)
0.82 lb. (.37 kg)
Body: Diecast Aluminum with Vinyl Paint Adjusting Screw: Plated Steel Trim: Plated Steel, Brass, Acetal Resin Diaphragm: Buna-N elastomer with Polyester Fabric Knob: Phenolic Plastic (option) Spring: Music Wire
Body: Diecast Aluminum with Epoxy Paint Adjusting Screw: Plated Steel Trim: Plated Steel, Stainless Steel, Acetal Resin Diaphragm: Fluoroelastomers, Polyester Valve Spring: Inconel, Range Spring: Music Wire
Pipe, Panel or Bracket
Pipe, Panel, or Bracket
2X 10-24 UNC-2B X .375 DEEP FOR PANEL MOUNTING
P40 & P40 NACE Dimensions 52.3 2.060 63.3 2.500
7.95 .313 SQ.
36.6 1.440
73.2 2.875
132.1 5.200 35 PSIG Spring
86.6 3.410
2X 10-24 UNC-2B X .375 DEEP FOR PANEL MOUNTING 52.3 2.060
60.5 2.380
VENT
63.3 2.500
36.6 1.440
31.5 1.240
IN
OUT 24.4 .960
GAUGE PORT 1/4-18 NPT 9.5 .375
86.6 3.410
mm
60.5 2.380
VENT
inches
IN
OUT
Optional Mounting Bracket
GAUGE PORT 1/4-18 NPT
Part Number 607-000-057 9.5 .375
< 64 >
belgas.net