67D Bulletin May 2010

Bulletin 71.1:67D May 2010

67D Series Pressure Reducing Regulators

P1183

P1182

TYPE 67D OR 67DR REGULATOR

TYPE 67DF OR 67DFR FILTERED REGULATOR

Figure 1. 67D Series Pressure Reducing Regulators

• Optional Smart Bleed™ Construction

• Easy Maintenance • Optional Integral Filter

• Optional Stainless Steel Construction • Compact and Light Weight

• Optional Internal Relief Valve • Rugged Construction

D103152X012

• No Air Loss

www.fisherregulators.com

Bulletin 71.1:67D Introduction The 67D Series regulators are typically used to deliver constant reduced pressure of gaseous fluids to pilot-operated controllers and other pneumatic instrumentation. As shown in the Available Configurations table, an assortment of regulators is available to meet diverse flow requirements.

Features • Compact—The 67D Series regulators are engineered for outstanding performance in a compact, lightweight package.

• Smart Bleed™—Opens to exhaust downstream pressure when inlet pressure drops below outlet pressure. Recommended for dead-end service.

• Pilot Supply Regulator—Improves the accuracy of two-path control regulators by reducing inlet sensitivity caused by fluctuating inlet pressures.

• Integral Filter—The Types 67DF, 67DFR, 67DFS, and 67DFSR have an integral filter ensuring clean downstream air supply.

• Pressure Loading Regulator —Provides accuracy and improved performance in dirty steam service by eliminating the need for a pilot regulator .

• Ease of Maintenance—No special tools are required to perform maintenance, and all maintenance can be performed with the regulator in the line. Filter elements are easily replaced.

• Sour Gas Service Capability—NACE International MR0175 and MR0103 compliant construction available.

• Optional Stainless Steel Construction—The Types 67DS, 67DSR, 67DFS, and 67DFSR provide high resistance to corrosion, which is especially beneficial for offshore applications.

• Full Usable Capacity—Fisher® regulators are laboratory tested. 100% of the published capacities can be used with confidence.

• Internal Relief—The Types 67DR, 67DSR, 67DFR, and 67DFSR have an internal relief valve with a soft seat for reliable shutoff with no discernible leakage. These regulators are recommended for conserving plant air.

2

• Rugged Construction—The 67D Series regulators are engineered for longer service life with minimal maintenance requirements.

• Dual Second Outlets—Body side outlets for pressure gauge or other uses.

• Corrosion Resistant Fasteners—Bolting and adjusting screw are double zinc-chromated for enhanced corrosion resistance. Optional stainless steel bolting and adjusting screw are also available.

Bulletin 71.1:67D Specifications Available Configurations Type 67D: Direct-operated regulator with aluminum body and without internal relief Type 67DR: Aluminum body with internal relief Type 67DS: Stainless steel body without internal relief Type 67DSR: Stainless steel body with internal relief Type 67DF: Aluminum body with filter and without internal relief Type 67DFR: Aluminum body with filter and internal relief Type 67DFS: Stainless steel body with filter and without internal relief Type 67DFSR: Stainless steel body with filter and internal relief See also Table 1 Body Size, Inlet and Outlet Connection Style 1/2 NPT Construction Materials See Table 3 Maximum Inlet Pressure (Body Rating)(1) All filtered models: 250 psig (17,2 bar) All unfiltered models: 400 psig (27,6 bar) Outlet Pressure Ranges See Table 2 Maximum Emergency Outlet Pressure(1) 150 psi (10,3 bar) over outlet pressure setting up to a maximum of 250 psi (17,2 bar) Flow Capacities See Table 4 and Capacity Information section Wide-Open Flow Coefficients Main Valve: Cg: 45.24; Cv: 1.33; C1: 35.02; Internal Relief Valve: Cg: 1.45; Cv: 0.045; C1: 32.8 IEC Sizing Coefficients Xt: 0.75 Types 67DR, 67DSR, 67DFR, and 67DFSR Internal Relief Performance Low capacity for minor seat leakage only, other overpressure protection must be provided if inlet pressure can exceed the maximum pressure rating of downstream equipment or exceeds maximum outlet pressure rating of the regulator.

Approximate Weights Types 67D and 67DR:1.2 pound (0,5 kg) Types 67DF and 67DFR:2.0 pounds (1 kg) Types 67DS and 67DSR: 2.8 pounds (1 kg) Types 67DFS and 67DFSR: 4.6 pounds (2 kg) 1.

2.

3.

4.

Smart Bleed™ Check Valve Setpoint 6 psi (0,41 bar) differential Pressure Registration Internal Spring Case Vent Location Aligned with inlet standard, other positions optional Drain Valve Location Aligned in the center of the dripwell Temperature Capabilities(1) With Nitrile (NBR) Standard Bolting: -20° to 180°F (-29° to 82°C) Stainless Steel Bolting: -40° to 180°F (-40° to 82°C) With Fluorocarbon (FKM): Polyethylene Filter(4) (Standard): 0° to 180°F (-18° to 82°C) Polyvinylidene(PVDF), Stainless Steel, or Glass Filter(Optional): 0° to 300°F (-18° to 149°C) (2) diaphragm, Low Temperature With Silicone (VMQ) Nitrile (NBR) O-rings, and Low Temperature bolting: -60° to 180°F (-51° to 82°C) With Gauges: -20° to 180°F (-29° to 82°C) With Automatic drain: 40° to 175°F (4° to 79°C) Types 67DF, 67DFR, 67DFS, and 67DFSR Filter Capabilities Micron Rating: Polyethylene Filter(4) (Standard): 5 microns Glass Fiber Filter (Optional): 5 microns PVDF Filter (Optional): 40 microns Stainless Steel Filter (Optional): 40 microns Options All Types • Handwheel adjusting screw • NACE International MR0175 or MR0103(3) construction • Panel mount (includes spring case with 1/4 NPT vent, handwheel, and panel mounting nut) • Closing cap (available on spring case with 1/4 NPT vent) • Fluorocarbon (FKM) elastomers for high temperatures and/or corrosive chemicals • Silicone (VMQ) elastomers for cold temperatures • Fixed Bleed Restriction • Triple scale outlet pressure gauge (brass or stainless steel) • Stainless steel stem and valve plug • Pipe plug in second outlet Types 67DFR and 67DFSR only • Smart Bleed™ internal check valve Types 67DF, 67DFR, 67DFS, and 67DFSR • Stainless steel drain valve

The pressure/temperature limits in this Bulletin and any applicable standard or code limitation should not be exceeded.

Silicone (VMQ) is not compatible with hydrocarbon gas.

Product complies with the material requirements of NACE International MR0175 or MR0103. Environmental limits may apply.

Do not use in high aromatic hydrocarbon service.

3

Bulletin 71.1:67D Table 1. Available Configurations CONSTRUCTION FEATURES TYPE

With Internal Relief

OPTIONAL FEATURES Smart BleedTM Internal Check Valve Airset

BODY MATERIAL External Fixed Bleed

Aluminum

X

X

X

X

X

With Filter

Drain Valve

67D

Stainless Steel

X

67DR 67DS

X

67DSR 67DF

X

67DFR

X

X

67DFS

X

X

X

X

X

67DFSR

X

X X

X

X

X

X

X

X

X

X

Table 2. Outlet Pressure Ranges and Control Spring Data TYPES

CONTROL SPRING DATA

OUTLET PRESSURE RANGES, PSIG (bar)

67D, 67DR, 67DF, and 67DFR

67DS, 67DSR, 67DFS, and 67DFSR

Wire Diameter, Inch (mm)

Free Length, Inch (mm)

Part Number

Material

Color Code

(0 to 1,4) (0 to 2,4) (0 to 4,1) (0 to 8,6)

GE07809T012 T14059T0012 T14058T0012 T14060T0012

Music Wire

Green stripe Silver Blue stripe Red stripe

0.135 0.156 0.170 0.207

0 to 35 (0 to 2,4) 0 to 60 (0 to 4,1) 0 to 125 (0 to 8,6)

T14113T0012 T14114T0012 T14115T0012

Inconel®

Silver stripe Blue Red

0.156 (3,96) 0.172 (4,37) 0.207 (5,26)

1.43 (36,2) 1.43 (36,2) 1.43 (36,2)

0 to 20 0 to 35 0 to 60 0 to 125 0 to 150

10C1729X012 T14113T0012 T14114T0012 T14115T0012 10C1730X012

Inconel®

Green Silver stripe Blue Red Black

0.135 0.156 0.172 0.207 0.250

1.50 1.43 1.43 1.43 1.77

0 to 20 0 to 35 0 to 60 0 to 125

(0 to 1,4) (0 to 2,4) (0 to 4,1) (0 to 8,6) (0 to 10,3)

(3,43) (3,96) (4,32) (5,26)

(3,43) (3,96) (4,37) (5,26) (6,35)

1.43 1.43 1.43 1.43

(36,2) (36,2) (36,2) (36,2)

(38,1) (36,2) (36,2) (36,2) (44,9)

Table 3. Construction Materials MATERIAL BODY AND SPRING CASE SPRING RETAINER

TYPES 67D and 67DR

67DF and 67DFR

67DS and 67DSR

Aluminum (ASTM B85/Alloy 380) Aluminum

67DFS and 67DFSR

CF8M/CF3M Stainless steel

Zinc-plated steel

316L Stainless steel

UPPER SPRING SEAT

Zinc-plated steel

DIAPHRAGM PLATE

Chromate conversion coated Aluminum

CONTROL SPRING

Plated steel or Inconel® (NACE)

Inconel®

Brass, Aluminum, or Stainless steel

316L Stainless steel

316 Stainless steel

VALVE STEM

VALVE PLUG VALVE SPRING

Stainless steel or Inconel® (NACE)

DIAPHRAGM AND O-RINGS

Nitrile (NBR), Fluorocarbon (FKM), Low Temp Nitrile (NBR), or Silicone (VMQ)(1)

SOFT SEAT AND GASKETS

Nitrile (NBR) or Fluorocarbon (FKM)

BOLTING AND ADJUSTING SCREW

Zinc-plated steel or Stainless steel

HANDWHEEL FILTER RETAINER

Zinc-plated steel ----

316 Stainless steel

FILTER ELEMENT

316 Stainless steel

----

Plastic, Glass fiber, or Stainless steel

----

Plastic, Glass fiber or Stainless steel

DRAIN VALVE

----

Brass or 18-8 Stainless steel

----

316 Stainless steel or 18-8 Stainless steel

DRIPWELL

----

Aluminum (ASTM B85/Alloy 380)

----

CF8M/CF3M Stainless steel

1. Silicone (VMQ) diaphragm is only available with internal relief (Types 67DR, 67DSR, 67DFR, and 67DFSR).

Inconel® is a mark owned by Special Metals Corporation.

4

Zinc-plated steel or Stainless steel ----

Bulletin 71.1:67D

TYPE 67D OR 67DS

TYPE 67DF OR 67DFS

M1153

M1154

INLET PRESSURE OUTLET PRESSURE ATMOSPHERIC PRESSURE

TYPE 67DR OR 67DSR

TYPE 67DFR OR 67DFSR

SMART BLEED™ OPTION FOR TYPE 67DFR OR 67DFSR

Figure 2. 67D Series Operational Schematics

Principle of Operation (Figure 2) Downstream pressure is registered internally on the lower side of the diaphragm. When the downstream pressure is at or above the set pressure, the valve plug is held against the orifice and there is no flow through the regulator . When demand increases, downstream pressure drops slightly allowing the spring to extend, moving the stem down and the valve plug away from the orifice. This allows flow through the regulator .

Internal Relief (Types 67DR, 67DSR, 67DFR, and 67DFSR) If for some reason, outside of normal operating conditions, the downstream pressure exceeds the setpoint of the regulator, the force created by the downstream pressure will lift the diaphragm until the diaphragm is lifted off the relief seat. This allows flow through the token relief. The relief valve on the Type 67DR, 67DSR, 67DFR, or 67DFSR is an elastomer plug that prevents leakage of air from the downstream to atmosphere during normal operation, thereby conserving plant air .

Smart Bleed™ Airset In some cases, it is desired to exhaust downstream pressure if inlet pressure is lost or drops below the setpoint of the regulator. For example, if the regulator is installed on equipment that at times has no flow demand but is expected to backflow on loss of inlet pressure. The Type 67DFR or 67DFSR can be ordered with the Smart Bleed™ option which includes an internal check valve for this application. During operation, if inlet pressure is lost, or decreases below the setpoint of the regulator, the downstream pressure will back flow upstream through the regulator and check valve. This

option eliminates the need for a fixed bleed downstream of the regulator, thereby conserving plant air.

Installation The 67D Series regulators may be installed in any position.

Spring case vents must be protected against the entrance of rain, snow, debris, or any other foreign material that might plug the vent openings. The inlet connection is marked “In” and the main outlet connection is marked “Out”. If a pressure gauge is not installed in one of the two secondary outlet connections, plug the unused connections. See Figures 4 and 5 for dimensions.

Emerson Process Management Regulator Technologies, Inc. provides an instruction manual with every regulator shipped. Refer to this for complete installation, operation and maintenance instructions. Included is a complete listing of individual parts and recommended spare parts.

Overpressure Protection The 67D Series regulators have maximum outlet pressure ratings that are lower than their maximum inlet pressure ratings. A pressure-relieving or pressure-limiting device is needed if inlet pressure can exceed the maximum outlet pressure rating.

Types 67DR, 67DSR, 67DFR, and 67DFSR regulators have a low capacity internal relief valve for minor seat leakage only.

Other overpressure protection must beprovided if the maximum inlet pressure can exceed the maximum pressure rating of the downstream equipment or exceeds maximum outlet pressure rating of theType 67DR, 67DSR, 67DFR, or67DFSR regulator.

5

Bulletin 71.1:67D Overpressuring any portion of a regulator or associated equipment may cause leakage, parts damage, or personal injury due to bursting of pressure-containing parts or explosion of accumulated gas. Regulator operation within ratings does not preclude the possibility of damage from external sources or from debris in the pipeline. A regulator should be inspected for damage periodically and after any overpressure condition.

Refer to the Capacity Information section and the WideOpen Flow Coefficients for Relief Valve Sizing in the Specifications section on page 3 to determine the required relief valve capacity.

For critical pressure drops (absolute outlet pressure equal to or less than one-half of absolute inlet pressure), use the following formula: Q = (P1)(Cg) For pressure drops lower than critical (absolute outlet pressure greater than one-half of absolute inlet pressure), use the following formula:

Q =

520 C P SIN GT g 1

3417 C1

P P1

)

DEG

where, Q P1 Cg G T C1 P

Capacity Information Table 4 shows the air regulating capacities of the 67D Series regulators at selected inlet pressures and outlet pressure settings. Flows are shown in SCFH (at 60°F and 14.7 psia) and in Nm 3/h (at 0°C and 1,01325 bar) of air.

= = = = = = =

gas flow rate, SCFH absolute inlet pressure, psia (P1 gauge + 14.7) gas sizing coefficient specific gravity of the gas absolute temperature of gas at inlet, °Rankine flow coefficient (Cg ÷ Cv) pressure drop across the regulator, psi

Then, if capacity is desired in normal cubic meters per hour (at 0°C and 1,01325 bar), multiplySCFH by 0.0268.

Note The 67D Series regulatorsmay be sized for 100% flow usingcapacitiesas shownin Table 4. It is not necessary to reduce published capacities.

NACE Universal Compliance

To determine the equivalent capacities for other gases, multiply the table capacity by the following appropriate conversion factor: 1.29 for 0.6 specific gravity natural gas, 0.810 for propane, 0.707 for butane, or 1.018 for nitrogen.

For gases of other specific gravities, divide the table capacities by the square root of the appropriate specific gravity. To find wide-open flow capacities for relief sizing at any inlet pressure, perform one of the following procedures.

Then, if necessary, convert using the factors provided above.

Optional materials are available for applications handling sour gases. These constructions comply with the recommendations of NACE International sour service standards.

The manufacturing processes and materials used by Regulator Technologies assure that all products specified for sour gas service comply with the chemical, physical, and metallurgical requirements of NACE MR0175 and/or NACE MR0103. Customers have the responsibility to specify correct materials. Environmental limitations may apply and shall be determined by the user.

POSITION 3

POSITION 4

POSITION 2

GE31784

POSITION 1 (ALIGNED WITH INLET) (STANDARD)

Figure 3. 67D Series Vent Positions

6

)

Bulletin 71.1:67D Table 4. 67D Series Flow Capacities

OUTLET PRESSURE RANGE, SPRING PART NUMBER AND COLOR CODE, PSIG (bar)

0 to 20 (0 to 1,4) GE07809T012 (Green Stripe) 10C1729X012 (Green)

0 to 35 (1 to 2,4) T14059T0012 (Silver) T14113T0012 (Silver Stripe)

OUTLET PRESSURE, PSIG (bar)

INLET PRESSURE, PSIG (bar)

CAPACITIES IN SCFH (Nm3/h) OF AIR Types 67D, 67DR, 67DS, and 67DSR

Types 67DF, 67DFR, 67DFS, and 67DFSR

5% Droop

10% Droop

20% Droop

10% Droop

20% Droop

5 (0,34)

25 50 75 100 150 200 250 400(1)

(1,7) (3,4) (5,2) (6,9) (10,3) (13,8) (17,2) (27,6)

320 740 1000 750 850 240 290 370

(8,6) (19,8) (26,8) (20,1) (22,8) (6,4) (7,8) (9,9)

530 1100 2700 3600 3200 810 460 590

(14,2) (29,5) (72,4) (96,5) (85,8) (21,7) (12,3) (15,8)

950 2200 3200 4100 6100 6300 6300 2700

(25,5) (59,0) (85,8) (110) (163) (169) (169) (72,4)

5% Droop 320 400 460 590 780 940 1000

(8,6) (10,7) (12,3) (15,8) (20,9) (25,2) (26,8)

400 540 850 2800 1700 1700 1800

(10,7) (14,5) (22,8) (75,0) (45,6) (45,6) (48,2)

600 1100 2600 2900 3900 2200 2200

(16,1) (29,5) (69,7) (77,7) (105) (59,0) (59,0)

10 (0,69)

25 50 75 100 150 200 250 400(1)

(1,7) (3,4) (5,2) (6,9) (10,3) (13,8) (17,2) (27,6)

450 1100 2600 3900 3400 1200 850 470

(12,1) (29,5) (69,7) (104) (91,1) (32,2) (22,8) (12,6)

790 1900 3200 4400 6600 7800 8000 3400

(21,2) (50,9) (85,8) (118) (177) (209) (214) (91,1)

1100 2700 3900 5100 7400 7800 8000 4700

(29,5) (72,4) (105) (137) (198) (209) (214) (126)

390 600 870 1100 2200 1900 2000

(10,5) (16,1) (23,3) (29,5) (59,0) (50,9) (53,6)

570 750 2100 3300 3200 2300 2400

(15,3) (20,1) (56,3) (88,4) (85,8) (61,6) (64,3)

830 1700 3100 3900 4800 4900 3300

(22,2) (45,6) (83,1) (105) (129) (131) (88,4)

20 (1,4)

50 75 100 150 200 250 400(1)

(3,4) (5,2) (6,9) (10,3) (13,8) (17,2) (27,6)

1500 2600 4500 6700 9000 11200 5500

(40,2) (69,7) (121) (180) (241) (300) (147)

2100 3500 4900 7200 9400 11200 6100

(56,3) (93,8) (131) (193) (252) (300) (163)

2600 3800 5100 7600 10000 11200 9100

(69,7) (102) (137) (204) (268) (300) (244)

870 1600 3600 4000 3300 2900

(23,3) (42,9) (96,5) (107) (88,4) (77,7)

1500 2600 4300 6600 4700 5100

(40,2) (69,7) (115) (177) (126) (137)

2100 3400 4600 6600 6900 7100

(56,3) (91,1) (123) (177) (185) (190)

15 (1,0)

25 50 75 100 150 200 250 400(1)

(1,7) (3,4) (5,2) (6,9) (10,3) (13,8) (17,2) (27,6)

480 860 1200 2000 5000 1000 500 820

(12,9) (23,0) (32,2) (53,6) (134) (26,8) (13,4) (22,0)

760 1500 2700 3900 5900 7600 8900 6400

(20,4) (40,2) (72,4) (104) (158) (204) (239) (172)

1000 2200 3700 4800 7200 8800 9200 7400

(26,8) (59,0) (99,2) (129) (193) (236) (247) (198)

360 720 870 1100 3400 2600 2700

(9,7) (19,3) (23,3) (29,5) (91,1) (69,7) (72,4)

520 1300 2100 3700 5700 4100 3300

(14,0) (34,8) (56,3) (99,2) (153) (110) (88,4)

800 2100 3500 4400 6400 5900 6000

(21,4) (56,3) (93,8) (118) (172) (158) (161)

20 (1,4)

25 50 75 100 150 200 250 400(1)

(1,7) (3,4) (5,2) (6,9) (10,3) (13,8) (17,2) (27,6)

370 770 1100 1800 6200 2900 4900 830

(9,9) (20,6) (29,5) (48,2) (166) (77,7) (131) (22,2)

570 1200 2600 4500 7000 7500 11000 8300

(15,3) (32,2) (69,7) (121) (188) (201) (295) (222)

810 1900 3800 5200 7500 7800 11000 8300

(21,7) (50,9) (102) (139) (201) (209) (295) (222)

420 880 1100 1800 3900 5600 4400

(11,3) (23,6) (29,5) (48,2) (104) (150) (118)

570 1500 2400 3800 6600 8700 8800

(15,3) (40,2) (64,3) (102) (177) (233) (236)

940 2300 3900 4800 7000 8700 8800

(25,2) (61,6) (105) (129) (188) (233) (236)

35 (2,4)

50 75 100 150 200 250 400(1)

(3,4) (5,2) (6,9) (10,3) (13,8) (17,2) (27,6)

1000 2000 2900 6700 9000 11100 7600

(26,8) (53,6) (77,7) (180) (241) (297) (204)

1700 3200 4500 7100 9500 11900 9300

(45,6) (85,8) (121) (190) (255) (319) (249)

2200 3700 5100 7600 9900 12500 12800

(59,0) (99,2) (137) (204) (265) (335) (343)

840 1500 2000 6300 8800 6000

(22,5) (40,2) (53,6) (169) (236) (161)

1300 2500 3900 6800 9000 10000

(34,8) (67,0) (104) (182) (241) (268)

2000 3300 4700 7000 9000 10000

(53,6) (88,4) (126) (188) (241) (268)

1. Inlet pressures above 250 psig (17,2 bar) with a maximum of 400 psig (27,6 bar) are only available on unfiltered models (Types 67D, 67DR, 67DS, and 67DSR).

- continued -

7

Bulletin 71.1:67D Table 4. 67D Series Flow Capacities (continued) OUTLET PRESSURE RANGE, SPRING PART NUMBER AND COLOR CODE, PSIG (bar)

OUTLET PRESSURE, PSIG (bar)

0 to 150 (0 to 10,3)(2) 10C1730X012 (Black)

CAPACITIES IN SCFH (Nm3/h) OF AIR Types 67D, 67DR, 67DS, and 67DSR 5% Droop

10% Droop

20% Droop

Types 67DF, 67DFR, 67DFS, and 67DFSR 5% Droop

10% Droop

20% Droop

35 (2,4)

50 75 100 150 200 250 400(1)

(3,4) (5,2) (6,9) (10,3) (13,8) (17,2) (27,6)

850 1400 1900 6600 9200 11200 1100

(22,8) 1400 (37,5) 2100 (53,6) (37,5) 2500 (67,0) 3600 (96,5) (50,9) 4100 (110) 5100 (137) (177) 7100 (190) 7600 (204) (247) 9600 (257) 10200 (273) (300) 11500 (308) 11500 (308) (29,5) 11900 (319) 11900 (319)

690 1000 1600 3100 7200 9500

(18,5) (26,8 (42,9) (83,1) (193) (255)

1100 1900 2700 5600 8400 9500

1800 2900 4300 6600 8900 9500

(48,2) (77,7) (115) (177) (239) (255)

60 (4,1)

75 100 150 200 250 400(1)

(5,2) (6,9) (10,3) (13,8) (17,2) (27,6)

1200 2100 4300 9200 11900 4000

(32,2) 2200 (59,0) 3000 (80,4) (56,3) 3600 (96,5) 4600 (123) (115) 6900 (185) 7600 (204) (247) 9700 (260) 10200 (273) (319) 12400 (332) 12800 (343) (107) 18000 (482) 18000 (482)

920 1500 2600 4300 9500

(24,7) 1600 (40,2) 2500 (69,7) 5200 (115) 8300 (255) 10600

(42,9) 2600 (67,0) 4000 (139) 6600 (222) 8800 (284) 11100

(69,7) (107) (177) (236) (297)

60 (4,1)

75 100 135 150 200 250 400(1)

(5,2) (6,9) (9,3) (10,3) (13,8) (17,2) (27,6)

690 1000 1500 1700 2500 5600 3500

(18,5) 1200 (26,8) 1900 (40,2) 3000 (45,6) 3500 (67,0) 6000 (150) 8100 (93,8) 17900

(53,6) (80,4) (123) (142) (206) (249) (480)

670 1000 1300 1400 1800 2400

(18,0) (26,8) (34,8) (37,5) (48,2) (64,3)

1100 1800 2500 2800 4100 6600

(29,5) 2000 (48,2) 2900 (67,0) 4300 (75,0) 5200 (110) 7600 (177) 10200

(53,6) (77,7) (115) (139) (204) (273)

80 (5,5)

100 135 150 200 250 400(1)

(6,9) (9,3) (10,3) (13,8) (17,2) (27,6)

1000 1600 1900 2900 4200 3700

(26,8) 1700 (45,6) 2900 (77,7) (42,9) 3000 (80,4) 4600 (123) (50,9) 3700 (99,2) 5400 (145) (77,7) 6000 (161) 7700 (206) (113) 10200 (273) 12200 (327) (99,2) 19900 (533) 10400 (279)

960 1500 1700 2200 2900

(25,7) (40,2) (45,6) (59,0) (77,7)

1700 2800 3100 4800 7100

(45,6) 3000 (75,0) 4600 (83,1) 5300 (129) 8000 (190) 10600

(80,4) (123) (142) (214) (284)

125 (8,6)

135 150 200 250 400(1)

(9,3) (10,3) (13,8) (17,2) (27,6)

1500 2100 3800 5800 6800

(40,2) 2500 (56,3) 3200 (102) 5600 (155) 7800 (182) 19400

(67,0) 3500 (85,8) 4300 (150) 6700 (209) 9000 (520) 20900

1600 1800 2900 4100

(42,9) (48,2) (77,7) (110)

2700 3200 5200 7800

(72,4) 4400 (85,8) 5200 (139) 8000 (209) 10400

(118) (139) (214) (279)

110 (7,6)

150 200 250 400(1)

(10,3) (13,8) (17,2) (27,6)

1900 2700 3400 4200

(50,9) 3300 (72,4) 4800 (91,1) 6200 (113) 11300

(88,4) 5500 (147) (129) 8300 (222) (166) 10500 (281) (303) 19100 (512)

2000 (53,6) 2600 (69,7) 3400 (91,1)

3400 (91,1) 5600 (150) 4800 (129) 8000 (214) 6000 (161) 10400 (279)

135 (9,3)

150 200 250 400(1)

(10,3) (13,8) (17,2) (27,6)

1800 3000 3900 6400

(48,2) 3300 (80,4) 5400 (105) 6700 (172) 13300

(88,4) 5600 (150) (145) 8300 (222) (180) 10700 (287) (356) 19300 (517)

1800 (48,2) 2800 (75,0) 3700 (99,2)

3200 (85,8) 5500 (147) 5100 (137) 8200 (220) 6600 (177) 11000 (295)

150 (10,3)

200 (13,8) 250 (17,2) 400(1) (27,6)

2900 (77,7) 4100 (110)

5200 (139) 7300 (196)

0 to 60 (0 to 4,1) T14058T0012 (Blue Stripe) T14114T0012 (Blue)

0 to 125 (0 to 8,6) T14060T0012 (Red Stripe) T14115T0012 (Red)

INLET PRESSURE, PSIG (bar)

(32,2) 2000 (50,9) 3000 (80,4) 4600 (93,8) 5300 (161) 7700 (217) 9300 (480) 17900

2900 (77,7) 5200 (139) 4000 (107) 7400 (198) 6400 (172) 13900 (373)

(93,8) (115) (180) (241) (560)

8300 (222) 11000 (295) 19700 (528)

(29,5) (50,9) (72,4) (150) (225) (255)

1. Inlet pressures above 250 psig (17,2 bar) with a maximum of 400 psig (27,6 bar) are only available on unfiltered models (Types 67D, 67DR, 67DS, and 67DSR).

2. Available for Types 67DS, 67DSR, 67DFS, and 67DFSR only.

Ordering Information When ordering, complete the Ordering Guide on pages 11 and 12. Refer to the Specifications section on page 3.

Review the description to the right of each specification and the information in each referenced table or figure. Specify your choice whenever a selection is offered.

8

8200 (220) 11000 (295)

Bulletin 71.1:67D C F

D

G

E

VENT

SIDE OUTLET 1/4 NPT

B MAX

OUTLET CONNECTION 1/2 NPT

INLET CONNECTION 1/2 NPT SIDE OUTLET 1/4 NPT

A

OPTIONAL GAUGE

GG01138

TYPE 67D OR 67DR 1.44 (37)

C

F

D G

E

CLOSING CAP

VENT 1/4 NPT SIDE OUTLET 1/4 NPT

B

1.33 (34)

SIDE OUTLET 1/4 NPT

OUTLET CONNECTION 1/2 NPT

INLET CONNECTION 1/2 NPT

A

GG01145

OPTIONAL GAUGE

INCHES (mm)

TYPE 67DS OR 67DSR STANDARD DIMENSIONS FOR GAUGE OPTION

STANDARD DIMENSIONS

DIMENSIONS, INCHES (mm) TYPES 67D, 67DR 67DS, 67DSR

A 2.35 (60)

B 3.66 (93)

C

D

E

F

G

4.54 (115)

2.98 (76)

1.49 (38)

2.75 (70)

0.63 (16)

5.12 (130)

Figure 4. Types 67D, 67DR, 67DS, and 67DSR Dimensions

9

Bulletin 71.1:67D C

F

D

VENT

G E OUTLET CONNECTION 1/2 NPT

INLET CONNECTION 1/2 NPT B MAX

H

OPTIONAL GAUGE

SIDE OUTLET 1/4 NPT

MOUNTING HOLES FOR 5/16 (7,9) DIAMETER BOLTS

A 2.92 (74)

SIDE OUTLET 1/4 NPT I GG01139

TYPE 67DF OR 67DFR C F

D G

E

CLOSING CAP VENT 1/4 NPT SIDE OUTLET 1/4 NPT

B

OUTLET CONNECTION 1/2 NPT

INLET CONNECTION 1/2 NPT

1.33 (34)

H

SIDE OUTLET 1/4 NPT OPTIONAL GAUGE

MOUNTING HOLES FOR 5/16 (7,9) DIAMETER BOLTS

A I

INCHES (mm) GG01135

TYPE 67DFS OR 67DFSR STANDARD DIMENSIONS FOR GAUGE OPTION

STANDARD DIMENSIONS DIMENSIONS, INCHES (mm)

TYPES

A

B

67DF, 67DFR

5.93 (151)

3.66 (93)

67DFS, 67DFSR

6.27 (159)

5.12 (130)

C

D

E

F

G

H

I

4.54 (115)

2.98 (76)

1.49 (38)

2.88 (73)

0.63 (16)

0.69 (18)

2.25 (57)

Figure 5. Types 67DF, 67DFR, 67DFS, and 67DFSR Dimensions

10

Bulletin 71.1:67D Ordering Guide Type (Select One) Type 67D (aluminum without internal relief)*** Type 67DR (aluminum with internal relief)*** Type 67DS (stainless steel without internal relief)*** Type 67DSR (stainless steel with internal relief)*** Type 67DF (aluminum with filter and without internal relief)*** Type 67DFR (aluminum with filter and internal relief)*** Type 67DFS (stainless steel with filter and without internal relief)*** Type 67DFSR (stainless steel with filter and internal relief)*** Quantity (Specify) Spring Case Style (Select One) Drilled hole vent (T ypes 67D, 67DR, 67DF , and 67DFR standard)*** 1/4 NPT vent (Types 67DS, 67DSR, 67DFS, and 67DFSR standard)*** Single hole panel mount*** Adjusting Screw (Select One) Square head (Types 67D, 67DR, 67DF, 67DFR standard)*** Square head with closing cap (Types 67DS, 67DSR, 67DFS, and 67DFSR standard)*** Handwheel*** Outlet Pressure Range (Select One) 0 to 20 psig (0 to 1,4 bar)*** 0 to 35 psig (0 to 2,4 bar)*** 0 to 60 psig (0 to 4,1 bar)*** 0 to 125 psig (0 to 8,6 bar)*** 0 to 150 psig (0 to 10,3 bar) (Types 67DS, 67DSR, 67DFS, and 67DFSR only)*** Diaphragm, O-Rings, and a Vlve Seat Plug(Select One) Nitrile (NBR) (standard)*** Fluorocarbon (FKM)** Silicone (VMQ) diaphragm, Low Temperature Nitrile (NBR) O-rings, and Nitrile (NBR) valve seat*

Filter Material (Select One) Polyethylene (5 microns) (standard)*** Glass (5 microns)*** Polyvinylidene (PVDF) (40 microns)*** Stainless steel (40 microns)*** Drain Valve (Select One) Brass (Types 67DF and 67DFR standard)*** Stainless steel (Types 67DFS and 67DFSR standard)*** Automatic Drain with Nitrile (NBR) elastomers*** Automatic Drain with Fluorocarbon (FKM) elastomers** Spring Case Vent Location (Select One) Position 1 - Aligned with inlet (standard)*** Position 2 Position 3 Position 4 External Fixed Bleed for Type 67DR, 67DSR, 67DFR, or 67DFSR (Optional) Yes** Smart Bleed™ Internal Check Valve Airset (Optional - Types 67DFR and 67DFSR only) Yes** Second Outlet (Select One) Open (Types 67D, 67DR, 67DF, and 67DFR standard)*** Plugged with pipe plug (Types 67DS, 67DSR, 67DFS, and 67DFSR standard)*** Pressure Gauge (see below) Triple Scale Pressure Gauge (Optional) Brass Gauge or Stainless Steel Gauge 0 to 30 psig/0 to 0.2 MPa/0 to 2,1 bar*** 0 to 60 psig/0 to 0.4 MPa/0 to 4,1 bar*** 0 to 160 psig/0 to 1.1 MPa/0 to 11,0 bar*** - continued -

11

Bulletin 71.1:67D Ordering Guide (continued) NACE International MR0175 Construction (Optional)(1) Yes (not available with gauge)** NACE International MR0103 Construction (Optional) Yes (not available with gauge)** Replacement Parts Kit (Optional) Yes, send one replacement parts kit to match this order.

1. Product complies with the material requirements of NACE International MR0175.

Environmental limits may apply.

Pressure (Please designate units): Maximum Inlet Pressure (P1max) Minimum Inlet Pressure (P1min) Downstream Pressure Setting(s) (P2) Maximum Flow (Qmax)

Regulators Quick Order Guide *** ** *

Specification Worksheet Application (Please designate units): Specific Use Line Size Gas Type and Specific Gravity Gas Temperature Does the Application Require Overpressure Protection?

Yes No If yes, which is preferred: Relief Valve Monitor Regulator Shut-off Device Is overpressure protection equipment selection assistance desired?

Readily Available for Shipment Allow Additional Time for Shipment Special Order, Constructed from Non-Stocked Parts.

Consult Your local Sales Office for Availability.

Performance Required: Accuracy Requirements?

Need for Extremely Fast Response?

Other Requirements:

Availability of the product being ordered is determined by the component with the longest shipping time for the requested construction.

Industrial Regulators

Natural Gas Technologies

TESCOM

Emerson Process Management Regulator Technologies, Inc.

Emerson Process Management Regulator Technologies, Inc.

Emerson Process Management Tescom Corporation

USA - Headquarters McKinney, Texas 75069-1872 USA Tel: 1-800-558-5853 Outside U.S. 1-972-548-3574

USA - Headquarters McKinney, Texas 75069-1872 USA Tel: 1-800-558-5853 Outside U.S. 1-972-548-3574

USA - Headquarters Elk River, Minnesota 55330-2445 USA Tel: 1-763-241-3238

Asia-Pacific Shanghai, China 201206 Tel: +86 21 2892 9000

Asia-Pacific Singapore, Singapore 128461 Tel: +65 6777 8211

Europe Bologna, Italy 40013 Tel: +39 051 4190611

Europe Bologna, Italy 40013 Tel: +39 051 4190611 Gallardon, France 28320 Tel: +33 (0)2 37 33 47 00

Middle East and Africa Dubai, United Arab Emirates Tel: +971 4811 8100

Europe Selmsdorf, Germany 23923 Tel: +49 (0) 38823 31 0

For further information visit www.fisherregulators.com The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners. Fisher is a mark owned by Fisher Controls, Inc., a business of Emerson Process Management.

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.

Emerson Process Management does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any Emerson Process Management product remains solely with the purchaser.

ŠEmerson Process Management Regulator Technologies, Inc., 2009, 2010; All Rights Reserved