Issuu on Google+

Bulletin 71.1:67CF 02/99

67CF Series Filter Regulators ✰

Compact and Light Weight

Designed for Digital Instrumentation

No Air Loss

Easy Maintenance W7426

A 67CF Series regulator used as a pilot supply regulator for the Type 299 pressure regulator

A 67CF Series filter regulator shown with optional pressure gauge W7412

W7423_1

Regulators

High Performance

Integral Filter

Internal Relief Valve

Rugged Construction D102656X012

A 67CF Series regulator used as a supply regulator for digital instrumentation

www.FISHERregulators.com


Bulletin 71.1:67CF Introduction The 67CF Series regulators are typically used to provide constantly controlled, reduced pressures to pneumatic and electropneumatic controllers and other instruments. These direct-operated regulators are suitable for most air or gas applications. Other applications include providing reduced pressures to air chucks, air jets, and spray guns.

Features • Compact—The 67CF Series regulators are engineered for outstanding performance in a compact, light-weight package. • Internal Relief—The Type 67CFR has an internal relief valve with a soft seat for reliable shutoff with no discernible leakage. • Panel Mounting—Panel mount construction includes spring case with 1/4-inch NPT vent, handwheel adjusting screw, and mounting nut. • Instrument Supply Regulator—Provides a clean air supply to a variety of pneumatic and electropneumatic instrumentation. • Digital Instrument Supply Regulator—Designed for the accuracy, repeatability, and hysteresis demands of digital instrumentation. • Pilot Supply Regulator—Improves the accuracy of two-path control regulators by reducing inlet sensitivity caused by fluctuating inlet pressures. • Pressure Loading Regulator—Provides high accuracy and improved performance in dirty steam service by eliminating the need for a pilot regulator (see figure 2). • Sour Gas Service Capability—NACE (MR0175) compliant construction available. • Integral Filter—An integral filter ensures clean downstream air supply. • Ease of Maintenance—No special tools are required to perform maintenance, and all maintenance can be performed with the regulator in the line. Filter elements are easily replaced. The one-piece valve plug cartridge allows easy inspection and replacement.

2

W7433

INLET PRESSURE OUTLET PRESSURE ATMOSPHERIC PRESSURE

Figure 2. 67CF Series Regulator Operational Schematic

• Rugged Construction—The 67CF Series regulators are engineered for longer service life with minimal maintenance requirements. • Second Outlet—Body side outlet for pressure gauge or other uses. • Powder Paint Coating—Fisher products are powder paint coated, offering impact, abrasion, and corrosion resistance. • Corrosion Resistant Fasteners—Adjusting screw and screws are double zinc-chromated for enhanced corrosion resistance. • Full Usable Capacity—Fisher regulators are laboratory tested. 100 percent of the published capacities can be used with confidence.


Bulletin 71.1:67CF Specifications Body Size, Inlet and Outlets Connection Style 1/4-inch NPT screwed

Drain Valve and Spring Case Vent Location Aligned with inlet standard, other positions optional

Maximum Inlet Pressure (Body Rating)(1) 250 psig (17,2 bar)

Approximate Unit Weight 1 pound (0,5 kg)

Outlet Pressure Ranges

Construction Materials Body, Spring Case and Dripwell: Aluminum (ASTM B85/Alloy 380) Pusher Post: Polyester resin Upper Spring Seat: Zinc-plated steel Diaphragm Plate: Zinc-plated steel Adjusting Screw: Zinc-plated steel Filter Retainer: Zinc-plated steel Valve Plug: Brass stem with nitrile (NBR) plug (standard); aluminum stem with nitrile (NBR) or fluoroelastomer (FKM) plug; or stainless steel stem with nitrile (NBR) or fluoroelastomer (FKM) plug (optional) Soft Seat: Nitrile (NBR) (standard), or fluoroelastomer (FKM) (optional) Diaphragm and O-Rings: Nitrile (NBR) (standard), fluoroelastomer (FKM), or silicone (VMQ) (optional) Control Spring: Plated steel (standard) or Inconel (for 67CFR NACE) Valve Spring: Stainless stee (standard) or Inconel (NACE) Drain Valve: Brass (standard), aluminum, or stainless steel (optional) Filter Element: Cellulose (standard), glass fiber, or stainless steel (optional)

CONTROL SPRING DATA OUTLET PRESSURE Wire Diameter, RANGES, PSIG (bar) Part Number Color Inch (mm) 0 to 20 (0 to 1,4) T14130T0012 green stripe 0.135 (3,43) 0 to 35 (0 to 2,4) T14059T0012 silver 0.156 (3,96) 0 to 60 (0 to 4,1) T14058T0012 blue stripe 0.170 (4,32) 0 to 125 (0 to 8,6) T14060T0012 red stripe 0.207 (5,26)

Maximum Emergency Outlet Pressure(1) 50 psi (3,4 bar) over outlet pressure setting Capacities See table 1 Wide-Open Flow Coefficients Main Valve: Cg: 11.7; Cv: 0.36; C1: 32.2 Internal Relief Valve: Cg: 1.45; Cv: 0.045; C1: 32.8 Pressure Registration Internal Accuracy Inlet Sensitivity: Less than 0.2 psig (0,014 bar) change in outlet pressure for every 25 psig (1,72 bar) change in inlet pressure Repeatability: 0.1 psig (0,0069 bar)(2) Air Consumption: testing repeatedly shows no discernible leakage Type 67CFR Internal Relief Performance Low capacity for minor seat leakage only; other overpressure protection must be provided if inlet pressure can exceed the maximum pressure rating of downstream equipment or exceeds maximum outlet pressure rating of the Type 67CFR Filter Capabilities Free Area: 12 times pipe area Micron Rating: Cellulose Element: 40 microns Glass Fiber Element: 10 microns Stainless Steel Element: 40 microns Regulator Temperature Capabilities With Nitrile (NBR): -40° to 180°F (-40° to 82°C) With Fluoroelastomer (FKM): 0° to 300°F (-18° to 149°C) With Silicone (VMQ)(3): -60° to 180°F (-51° to 82°C)

Options • Handwheel adjusting screw • NACE construction • Ammonia service construction • Panel mount (includes spring case with 1/4-inch vent, handwheel, and panel mounting nut) • Closing cap (available on spring case with 1/4-inch NPT vent) • Aluminum or stainless steel drain valve • Fluoroelastomer (FKM) elastomers for high temperatures and/or corrosive chemicals • Silicone (VMQ) elastomers for cold temperatures • Triple scale outlet pressure gauge (brass or stainless steel) • Stainless steel stem on the valve plug • Fixed bleed restriction mounted in the side outlet • Tire valve in second outlet • Pipe plug in second outlet

1. The pressure/temperature limits in this bulletin and any applicable standard or code limitation should not be exceeded. 2. Repeatability is the measure of the regulator's ability to return to setpoint consistently when traveling from steady state to transient to steady state. 3. Silicone is not compatible with hydrocarbon gas.

3


Bulletin 71.1:67CF

67CF SERIES FILTER REGULATOR

UPSTREAM PRESSURE LOADING PRESSURE

W7434

DOWNSTREAM PRESSURE

TYPE 92P STEAM REGULATOR

A 67CF SERIES PRESSURE LOADING REGULATOR USED WITH THE TYPE 92P STEAM REGULATOR ELIMINATES THE NEED FOR A PILOT REGULATOR. THIS PROVIDES HIGH ACCURACY AND IMPROVED PERFORMANCE IN DIRTY STEAM SERVICE.

Figure 3. 67CF Series Regulator Used to Pressure Load a 92P Steam Regulator

Capacity Information Table 1 shows the air regulating capacities of the 67CF Series regulators at selected inlet pressures and outlet pressure settings. Flows are shown in scfh (at 60°F and 14.7 psia) and in m³/h(n) (at 0°C and 1,01325 bar) of air. Note The 67CF Series regulators may be sized for 100% flow using capacities as shown in table 1. It is not necessary to reduce published capacities.

For critical pressure drops (absolute outlet pressure equal to or less than one-half of absolute inlet pressure), use the following formula: Q = (P1)(Cg) where, Q = gas flow rate, scfh P 1 = absolute inlet pressure, psia (P1 gauge + 14.7) For pressure drops lower than critical (absolute outlet pressure greater than one-half of absolute inlet pressure), use the following formula:

Q= To determine the equivalent capacities for other gases, multiply the table capacity by the following appropriate conversion factor: 1.29 for 0.6 specific gravity natural gas, 0.810 for propane, 0.707 for butane, or 1.018 for nitrogen. For gases of other specific gravities, divide the table capacities by the square root of the appropriate specific gravity. To find wide-open flow capacities for relief sizing at any inlet pressure, perform one of the following procedures. Then, if necessary, convert using the factors provided above.

4

 3417 520 CgP1SIN  GT  C1

∆P   DEG P1 

where, Q G T Cg P1 C1 ∆P

= = = = = = =

gas flow rate, scfh specific gravity of the gas absolute temperature of gas at inlet, °Rankine gas sizing coefficient absolute inlet pressure, psia flow coefficient (Cg ÷ Cv) pressure drop across the regulator, psi

Then, if capacity is desired in normal cubic meters per hour (at 0°C and 1,01325 bar), multiply scfh by 0.0268.


Bulletin 71.1:67CF Table 1. Capacities OUTLET PRESSURE RANGE, SPRING PART NUMBER AND COLOR, PSIG (bar)

OUTLET PRESSURE, PSIG (bar)

10% Droop

20% Droop

(1,0)

(3,4) (5,2) (6,9) (10,3) (17,2)

250 300 330 400 450

(6,7) (8,0) (8,8) (10,7) (12,1)

430 690 1150 1600 1800

(11,5) (18,5) (30,8) (42,9) (48,2)

(1,4)

50 75 100 150 250

(3,4) (5,2) (6,9) (10,3) (17,2)

350 530 750 1850 2800

(9,4) (14,2) (20,1) (49,6) (75,0)

500 820 1300 1850 3000

(13,4) (22,0) (34,8) (49,6) (80,4)

(2,4)

50 75 100 150 250

(3,4) (5,2) (6,9) (10,3) (17,2)

400 600 840 1850 3000

(10,7) (16,1) (22,5) (49,6) (80,4)

620 980 1300 1850 3000

(16,6) (26,3) (34,8) (49,6) (80,4)

35

(2,4)

50 75 100 150 250

(3,4) (5,2) (6,9) (10,3) (17,2)

370 540 760 1360 3000

(9,9) (14,5) (20,4) (36,4) (80,4)

560 940 1300 1850 3000

(15,0) (25,2) (34,8) (49,6) (80,4)

60

(4,1)

75 100 150 250

(5,2) (6,9) (10,3) (17,2)

570 830 1450 2900

(15,3) (22,2) (38,9) (77,7)

830 1220 1850 3000

(22,2) (32,7) (49,6) (80,4)

80

(5,5)

100 150 250

(6,9) (10,3) (17,2)

600 880 1400

(16,1) (23,6) (37,5)

870 1320 2500

(23,3) (35,4) (67)

125

(8,6)

150 250

(10,3) (17,2)

960 1700

25,7() (45,6)

1400 2580

(37,5) (69,1)

20

35

0 to 60 (0 to 4,1) T14058T0012 Blue stripe

0 to 125 (0 to 8,6) T14060T0012 Red stripe

CAPACITIES IN SCFH (m3/h(n)) OF AIR

50 75 100 150 250

15

0 to 35 (0 to 2,4) T14059T0012 Silver

INLET PRESSURE, PSIG (bar)

Overpressure Protection The 67CF Series regulators have maximum outlet pressure ratings that are lower than their maximum inlet pressure ratings. A pressure relieving or pressure limiting device is needed if inlet pressure can exceed the maximum outlet pressure rating. Refer to the Capacity Information section and the relief sizing coefficient in the specifications table to determine the required relief valve capacity. The Type 67CFR regulator has a low capacity internal relief valve for minor seat leakage only. Other overpressure protection must be provided if the maximum

inlet pressure can exceed the maximum pressure rating of the downstream equipment or exceeds maximum outlet pressure rating of the Type 67CFR regulator.

Ordering Information When ordering, complete the Ordering Guide on page 8. Refer to the Specifications on page 2. Review the description to the right of each specification and the information in each referenced table or figure. Specify your choice whenever a selection is offered.

5


Bulletin 71.1:67CF 4.56 (116)

2.56 (65)

3.00 (76) 1.48 (38)

0.62 (16)

3.50 (89)

INLET CONNECTION 1/4-INCH NPT

OPTIONAL GAUGE

OUTLET CONNECTIONS 1/4-INCH NPT 0.69 (18)

MOUNTING HOLES FOR 5/16-INCH DIAMETER BOLTS

3.50 (89)

SIDE OUTLET 1/4-INCH NPT

2.25 (57) B2699_A

2.87 (73)

INCHES (mm) B2699_B

DIMENSIONS FOR GAUGE OPTION

STANDARD DIMENSIONS

VENT POSITION 1 (STANDARD)

VENT POSITION 3

INLET

DRAIN VALVE POSITION 1 (STANDARD)

OUTLET

GAUGE

VENT POSITION 4

GAUGE

DRAIN VALVE POSITION 4

VENT POSITION 2

DRAIN VALVE POSITION 3

INLET

OUTLET

DRAIN VALVE POSITION 2 B2699_D

B2699_C

VENT POSITIONS

Figure 4. Dimensions

6

DRAIN VALVE POSITIONS


Bulletin 71.1:67CF 4.56 (116)

2.56 (65)

3.00 (76)

2.37 (60) MAX PANEL 0.12 TO 0.25 (3,0 TO 6,5)

1.43 (36)

CLOSING CAP

1.48 (38) 0.72-INCH (1,8 mm) SPRING CASE PANEL BOSS

4.78 (121) MAX

4.69 (119) 1/4-INCH NPT VENT 2.41 (61) MAX 1.14 (29)

INLET CONNECTION 1/4-INCH NPT

OUTLET CONNECTIONS 1/4-INCH NPT 0.69 (18)

OPTIONAL GAUGE

MOUNTING HOLES FOR 5/16-INCH DIAMETER BOLTS

3.50 (89)

SIDE OUTLET TAPPED 1/4-INCH NPT

2.25 (57) B2700_A

2.87 (73)

INCHES (mm) B2700_B

DIMENSIONS FOR PANEL MOUNT OPTION WITH HAND WHEEL AND 1/4-INCH SPRING CASE VENT

DIMENSIONS FOR CLOSING CAP OPTION WITH 1/4-INCH SPRING CASE VENT

Figure 4. Dimensions (continued)

SPACER (FOR INSTALLING A 67CF SERIES REGULATOR IN AN EXISTING INSTALLATION IF THE MOUNTING BOLTS ARE TOO LONG)

0.25 (6.35)

0.50 OD (12.7)

0.32 ID (8.12)

B2697_B

SPACER OUTER DIAMETER

SPACER WIDTH AND INNER DIAMETER B2697_A

Figure 5. Spacer Dimensions and Installation Schematic

7


Bulletin 71.1:67CF Spring Case Vent Location (Select One)

Ordering Guide

   

Type (Select One)  Type 67CF (without internal relief)***  Type 67CFR (with internal relief)***

Spring Case Style (Select One)  Standard with drilled hole vent***  Handwheel adjusting screw***  Panel mount (includes 1/4-inch spring case vent, handwheel adjusting screw, and mounting nut)***  Closing cap and 1/4-inch NPT spring case vent***

Outlet Pressure Range (Select One) 0 0 0 0

to to to to

 Nitrile (NBR) (standard)***  Fluoroelastomer (FKM)**  Silicone (VMQ) diaphragm, O-rings, and nitrile valve plug*

Filter Material (Select One)

NACE (MR0175) Construction (Optional)  Yes**

Ammonia Service Construction (Optional)  Yes**

Application (Please designate units): Specific Use Line Size Gas Type and Specific Gravity Gas Temperature Does the Application Require Overpressure Protection?  No  Yes, if so, which is preferred:  Relief Valve  Monitor Regulator  Shutoff Device Is overpressure protection equipment selection assistance desired?

Drain Valve Location (Select One) 1 - Aligned with inlet (standard)*** 2 3 4

Pressure (Please designate units): Maximum Inlet Pressure (P1max) Minimum Inlet Pressure (P1min) Downstream Pressure Setting(s) (P2) Maximum Flow (Qmax)

Fisher Regulators Quick Order Guide

*

Brass Gauge  0 to 30 psig/0 to 0.2 MPa/0 to 2 bar***  0 to 60 psig/0 to 0.4 MPa/0 to 4 bar***  0 to 160 psig/0 to 1.1 MPa/0 to 11 bar***

Specification Worksheet

 Brass (standard)***  Aluminum***  Stainless steel***

**

Triple Scale Pressure Gauge (Optional)

 Yes, send one replacement parts kit to match this order.

Drain Valve (Select One)

***

Open (standard)*** Plugged with pipe plug*** Tire Valve*** Pressure Gauge (see below)

Replacement Parts Kit (Optional)

 Cellulose (40 microns) (standard)***  Glass (10 microns)***  Stainless steel (40 microns)***

Position Position Position Position

   

Stainless Steel Gauge  0 to 30 psig/0 to 0.2 MPa/0 to 2 bar***  0 to 60 psig/0 to 0.4 MPa/0 to 4 bar***  0 to 160 psig/0 to 1.1 MPa/0 to 11 bar***

20 psig (0 to 1,4 bar) (not available for NACE)*** 35 psig (0 to 2,4 bar)*** 60 psig (0 to 4,1 bar)*** 125 psig (0 to 8,6 bar)***

Diaphragm, O-Rings, and Valve Plug (Select One)

   

1 - Aligned with inlet (standard)*** 2 3 4

Second Outlet (Select One)

Quantity (Specify)

   

Position Position Position Position

Standard - Readily Available for Shipment Non-Standard - Allow Additional Time for Shipment Special Order, Constructed from Non-Stocked Parts. Consult Your Fisher Sales Representative for Availability.

Performance Required: Accuracy Requirements? Need for Extremely Fast Response? Other Requirements:

Availability of the product being ordered is determined by the component with the longest shipping time for the requested construction.

ŠFisher Controls International, Inc., 1999; All Rights Reserved Fisher and Fisher Regulators are marks owned by Fisher Controls International, Inc. The Emerson logo is a trade mark and service mark of Emerson Electric Co. All other marks are the property of their respective owners.

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.

For information, contact Fisher Controls: Marshalltown, Iowa 50158 USA 28320 Gallardon, France Sao Paulo 05424 Brazil Singapore 128461 Printed in U.S.A.

www.FISHERregulators.com

Regulators


67CF Bulletin Feb 1999