Printable PartyFavors
WELCOME FUTURE BRONC CLASS OF 2030
What’sInside
1.1 Glasses
2.1 Bow Tie/Hair Bow
3.1 Tabletop Logos
4.1 Cupcake Toppers
5.1 Straw Toppers
6.1 Banners
7.1 Photo Props
Tip: Print on cardstock for sturdier results, or download and bring to your local printer for better quality!
1. Cut along the dotted line.
2. Tape the flaps at the edge of glasses to the flaps at the edge of the numbered temple piece.
2.1
1. Cut along the dotted line.
2. Use a hole punch or poke holes through the two pairs of gray holes in the center of the bow.
3. Run a string or rubberband through the back of one hole and then through the front of its pair. Bring around through the back and repeat for the second pair of holes, then tie off around the neck or hair strand.
2030 Class of BOW TIE/HAIR BOW
2030 Class
of
3.1
1. Cut along the dotted line.
2. Fold red tabs inward to support the logo.
TABLETOP LOGOS
#Rider2030
Classof 2030
1. Cut along the dotted line.
2. Attach to lollipop stick.
3. Place in cupcake or muffin and serve.
Classof
CUPCAKE TOPPERS
Classof 2030
1. Cut along the dotted line.
2. Punch holes as indicated.
3. Slide straw through holes along the back, making sure not to cover the artwork.
Classof 2030
STRAW TOPPERS
Classof 2030
1. Cut along the dotted line.
2. Punch holes as indicated and string through each piece (see below).
BRONCS R IDER
Class of
2030
RIDER BRONCS 2030 BANNER
R
R
R
Classof
2
1. Cut along dotted line.
2. Attach to stick and use as a prop for photos.
Classof
Classof 2030
