A1 Tools EOFY Catalogue

A1 TOOLS

95 South Road, HINDMARSH

PH: 08 8241 7600 a1tools.com.au

MUST

E N D JUNE 30 Powering True Independents

All prices include GST and some products may be subject to freight fees, where applicable. Advertised products are available while stocks last. We reserve the right to correct any printing/digital errors and omissions. Accessories shown with products are not included, unless specified. Colours may vary to actual items. Offers valid from 01/04/21 - 30/06/21, or while stocks last.

180NM MAX. TORQUE

125NM MAX. TORQUE

$319

$329

TOOL ONLY

TOOL ONLY

18V Brushless 4-Stage Impact Driver - DTD171Z

18V Brushless Heavy Duty Hammer Driver Drill - DHP481Z

• 4 Stages of impact selection plus two T-Modes, A-Mode and bolt mode • On-the-go single hand impact selection button • Impressive 180Nm of max. fastening torque

• Durable aluminium gear housing •M echanical 2 speed gearing with all metal gear construction •1 25Nm Max lock torque delivers unbeatable power

$329

$349

TOOL ONLY

TOOL ONLY

18V Brushless 165mm Circular Saw - DHS680Z

18V Brushless 1/2” Impact Wrench - DTW300Z

•M ax cut capacity of 57mm with up to 50º bevel capacity • Automatic Torque Drive increases torque to power through any cut • High cutting performance with up to 5,000rpm no load speed

•V ariable speed trigger & Quick Trigger mode which engages immediate full speed • Forward & Reverse Automatic Stop, with 6 modes for customised applications • High power in a compact design with 330Nm maximum fastening torque

$349

$229

TOOL ONLY

TOOL ONLY

18V Brushless Recipro Saw - DJR187Z

18V Multi-tool - DTM51Z

•3 2mm stroke with a cutting capacity of 255mm in wood • Newly designed vertical crank mechanism reduces vibration • High performance 3,000spm no load speed

• T ool-less accessory changes with lever locking system • Compatible with a wide range of accessories • 6,000 - 20,000opm no load speed for versatile performance

Powering True Independents

$369 TOOL ONLY

18V Brushless D-Handle Jigsaw - DJV182Z •2 6mm stroke with a cutting capacity of 135mm in wood • Soft No-Load improves your control & battery life • 800 - 3,500spm no load speed

$499 TOOL ONLY

18V High Brightness LED Work Light - DML809 •H igh brightness with a max. 10,000lm • Powered by either 18V Li-ion batteries or AC power • Increased runtime with 2x 18V terminals, up to 8.5 hours with 2x 6.0Ah batteries

330NM MAX. TORQUE

KICKBACK DETECTION

$349

$319

TOOL ONLY

TOOL ONLY

18V Brushless 1/2” Impact Wrench - DTW300Z

18V Brushless 125mm Slide Switch Angle Grinder - DGA504Z

•V ariable speed trigger & Quick Trigger mode which engages immediate full speed • Forward & Reverse Automatic Stop, with 6 modes for customised applications • High power in a compact design with 330Nm maximum fastening torque

• Anti-kickback detection, anti-restart and soft start •A utomatic Torque Drive increases torque to power through any cut •E xtreme performance with 8,500rpm no load speed

$219

$219

125mm (5”) Angle Grinder - 9565C

355mm (14”) Cut Off Saw - M2401G

• Slide switch with lock on function • SJS system absorbs shock by accidental wheel lock & protects gears • High performance 1,400W* for heavy duty work

•C utting capacity of 102x194mm, 70x233mm or 115mm diameter • Adjustable guide plate with 3 settings • Reliable 2,000W* motor

*Continuous rating input

*Continuous rating input

$449 TOOL ONLY

$369 TOOL ONLY

$329 TOOL ONLY

18V Brushless Heavy Duty Hammer Driver Drill - DHP481Z •D urable aluminium gear housing • Mechanical 2 speed gearing with all metal gear construction • 125Nm Max lock torque delivers unbeatable power

$499 TOOL ONLY

18Vx2 Brushless 355mm (14”) Abrasive Cut-Off Saw - DLW140Z

18V Brushless 150mm (5-7/8”) Metal Cutter - DCS553Z

18V High Brightness LED Work Light - DML809

•C utting capacity of 102x194mm - 70x233mm or 127mm diameter • Tool-less wheel & guide plate adjustment • 3,800rpm no load speed motor for light load cutting

•1 50mm TCT saw blade delivering 57.5mm cutting depth • Self-Dust collecting housing reduces scatter of metal chips • High performance cutting with 4,200rpm no load speed

•H igh brightness with a max. 10,000lm • Powered by either 18V Li-ion batteries or AC power • Increased runtime with 2x 18V terminals, up to 8.5 hours with 2x 6.0Ah batteries

Powering True Independents

18V Brushless 4-Stage Impact Driver - DTD171Z • 4 Stages of impact selection plus two T-Modes, A-Mode and bolt mode • On-the-go single hand impact selection button • Impressive 180Nm of max. fastening torque

Powering True Independents

$319 TOOL ONLY

18V Brushless 1/2” Impact Wrench - DTW300Z • Variable speed trigger & Quick Trigger mode which engages immediate full speed • Forward & Reverse Automatic Stop, with 6 modes for customised applications • High power in a compact design with 330Nm maximum fastening torque

Powering True Independents

$349 TOOL ONLY

18V Blower - DUB185Z • Increased air volume with 3.2m³/min • 3 stage air volume settings & variable speed trigger for maximum control • Wind speeds of up to 352km/h for higher blowing efficiency

Powering True Independents

$119 TOOL ONLY

$349

TOOL ONLY

$319 TOOL ONLY

18V Brushless 1/2” Impact Wrench - DTW300Z

18V Brushless 125mm Slide Switch Angle Grinder - DGA504Z

•V ariable speed trigger & Quick Trigger mode which engages immediate full speed • Forward & Reverse Automatic Stop, with 6 modes for customised applications • High power in a compact design with 330Nm maximum fastening torque

• Anti-kickback detection, anti-restart and soft start •A utomatic Torque Drive increases torque to power through any cut •E xtreme performance with 8,500rpm no load speed

Powering True Independents

$319 TOOL ONLY

$329 TOOL ONLY

18V Brushless 4-Stage Impact Driver - DTD171Z

18V Brushless Heavy Duty Hammer Driver Drill - DHP481Z

• 4 Stages of impact selection plus two T-Modes, A-Mode and bolt mode • On-the-go single hand impact selection button • Impressive 180Nm of max. fastening torque

• Durable aluminium gear housing •M echanical 2 speed gearing with all metal gear construction •1 25Nm Max lock torque delivers unbeatable power

$329 TOOL ONLY

$349 TOOL ONLY

18V Brushless 165mm Circular Saw - DHS680Z

18V Brushless 1/2” Impact Wrench - DTW300Z

•M ax cut capacity of 57mm with up to 50º bevel capacity • Automatic Torque Drive increases torque to power through any cut • High cutting performance with up to 5,000rpm no load speed

• Variable speed trigger & Quick Trigger mode which engages immediate full speed • F orward & Reverse Automatic Stop, with 6 modes for customised applications •H igh power in a compact design with 330Nm maximum fastening torque

Powering True Independents

$349

$319

TOOL ONLY

TOOL ONLY

18V Brushless 1/2” Impact Wrench - DTW300Z

18V Brushless 125mm Slide Switch Angle Grinder - DGA504Z

•V ariable speed trigger & Quick Trigger mode which engages immediate full speed • Forward & Reverse Automatic Stop, with 6 modes for customised applications • High power in a compact design with 330Nm maximum fastening torque

• Anti-kickback detection, anti-restart and soft start •A utomatic Torque Drive increases torque to power through any cut •E xtreme performance with 8,500rpm no load speed

$219

$219

125mm (5”) Angle Grinder - 9565C

355mm (14”) Cut Off Saw - M2401G

• Slide switch with lock on function • SJS system absorbs shock by accidental wheel lock & protects gears • High performance 1,400W* for heavy duty work

•C utting capacity of 102x194mm, 70x233mm or 115mm diameter • Adjustable guide plate with 3 settings • Reliable 2,000W* motor

*Continuous rating input

*Continuous rating input

Powering True Independents

18VPLUMBERSKIT(HRZ)

18VMINCHIPCOMBO(HRZ)

18V BRUSHLESS PLUMBERS KIT

18V BRUSHLESS MINI CHIPPY COMBINATION PACK • • • •

NR1890DBCL(H4Z) C18DBAL(H4Z) BSL36A18 (x 2) UC18YSL3(H0Z)

LIMITED TIME ONLY

$1049

36VWRENCHKIT1(HRZ)

WR36DB(H4Z) WR36DC(H4Z) BSL36A18 (x 2) UC18YSL3(H0Z)

CR18DA(H4Z) G18DBL(H5Z) DH18DPC(H4Z) BSL36A18 (x 2) UC18YSL3(H0Z) 402094

LIMITED TIME ONLY

$1099

36VWRENCHKIT2(HRZ)

2 PIECE 36V BRUSHLESS WRENCH KIT 1 • • • •

• • • • • •

LIMITED TIME ONLY

Powering True Independents

$999

2 PIECE 36V BRUSHLESS WRENCH KIT 2 • • • •

WR36DA(H4Z) WR36DC(H4Z) BSL36A18 (x 2) UC18YSL3(H0Z)

LIMITED TIME ONLY

$999

M1808DA(H4Z)

M3612DA(H4Z)

NEW RELEASE

NEW RELEASE

$299

18V BRUSHLESS LAMINATOR TRIMMER

36V BRUSHLESS ROUTER

$699

NR1890DBCL(HRZ) HFB75 (x2)

AIRFRAMERCOMBO1(H2Z)

BONUS

2x 75MM FRAMING D HEAD BRIGHT NAILS (PACK OF 3000) VALUED AT $65 2 PIECE PNEUMATIC COMBINATION PACK • NR90AD(H4Z) • NT65MA4(H2Z) • 402094

LIMITED TIME ONLY

Powering True Independents

$699

18V BRUSHLESS 90MM (STRIP) FRAMING NAILER KIT

$949

24V 4.5” ANGLE GRINDER (3200007AU)

24V BRUSHLESS DRILL KIT (3707107AU) • 19 torque positions (plus drill) • Variable speed trigger • Comes with 2Ah battery, charger and carry case

• 14mm shaft • 7000 RPM • Lightweight

$9999 SKIN ONLY

24V 1/2” IMPACT WRENCH (3801207AU) • 300Nm of torque • Variable speed trigger • Forward/reverse option

BUILT-IN LED

$189 SKIN ONLY

24V BRUSHLESS HAMMER DRILL (3704107AU) • •

•

Variable speed trigger 20 torque positions (plus drill and hammer) 13mm keyless metal chuck

BUILT-IN LED

$169 SKIN ONLY

Powering True Independents

$199 KIT

BUILT-IN LED

24V 1/2” IMPACT WRENCH (3801207AU)

24V BRUSHLESS DRILL KIT (3707107AU)

• 300Nm of torque • Variable speed trigger • Built-in LED light

• 19 torque positions (plus drill) • Variable speed trigger • Comes with 2Ah battery, charger and carry case

$189 SKIN ONLY

Powering True Independents

$199 KIT

24V 1/2” IMPACT WRENCH (3801207AU)

24V BRUSHLESS DRILL KIT (3707107AU)

• 300Nm of torque • Variable speed trigger • Forward/reverse option

• 19 torque positions (plus drill) • Variable speed trigger • Comes with 2Ah battery, charger and carry case

BUILT-IN LED

BUILT-IN LED

$189

$199

SKIN ONLY

KIT

24V 4.5” ANGLE GRINDER (3200007AU)

24V BRUSHLESS HAMMER DRILL (3704107AU)

24V 1/4” HEX IMPACT DRIVER (3801307AU)

• 14mm shaft • 7000 RPM • Lightweight

• 20 torque positions (plus drill and hammer) • Variable speed trigger • 13mm keyless metal chuck

• Variable speed trigger • 280Nm of torque • Built-in LED

$149 $9999

$169

SKIN ONLY

SKIN ONLY

SKIN ONLY

24V WORK LIGHT (35062AU) • • •

220 lumens Rotating head 20 hours runtime (on 2Ah battery)

24V WORK LIGHT (35062AU) • Variable speed trigger • For wet and dry - 100ml (liquids), 500ml (dry debris) • Easy emptying

$9999 SKIN ONLY

24V JIGSAW (20077AU) • 1” stroke • 4 pendulum function • Tool-less blade change

$119 SKIN ONLY

Powering True Independents

WET & DRY

$89

SKIN ONLY

24V BRUSHLESS DRILL KIT (3707107AU) • 19 torque positions (plus drill) • Variable speed trigger • Comes with 2Ah battery, charger and carry case

$199

Powering True Independents

The RATO parallel cable can be used to run two RATO inverter generators of any size, side by side, to double the power output!

INVERTER GENERATOR (R3000iE) • Electric and recoil start for convenience and ease of use • Free shifting between 50Hz and 60Hz • Lightweight and low noise level

3.3kw

Powering True Independents

$1699

INVERTER GENERATOR (R2000iS)

INVERTER GENERATOR (R3000iE)

• Quiet, lightweight and can run for up to 6 hours on continuous • Ideal for powering small electrical devices • Free shifting between 50Hz and 60Hz

• Electric and recoil start for convenience and ease of use • Free shifting between 50Hz and 60Hz • Lightweight and low noise level

2.0kw

$1069

3.3kw

$1699 12 month /500 hour

Domestic Warranty

12 month /500 hour

Commercial Warranty

OPEN FRAME INVERTER GENERATOR (R8750iD)

SINGLE IMPELLER HIGH PRESSURE PUMP (RT50YB50-3.8Q)

• Low engine oil alarm and automatic shutdown to protect engine • Convenient recoil and electric start • Lightweight, high power output

• 4 stroke OHV single cylinder engine with recoil start • Cast iron cylinder liner ensures consistent performance and durability • Rugged full frame protection

8.75kw

$2399 Powering True Independents

7hp

$539

INDUSTRIAL GENERATOR (R8500D-3)

OPEN FRAME INVERTER GENERATOR (R6250iD)

OPEN FRAME INVERTER GENERATOR (R8750iD)

• Strong stable output, reliable performance • Convenient recoil and electric start • Includes RCD switch and 32amp IP66 plug

• Smart circuit protection, reliable safety • Accessible easy operation on front panel • Lightweight, high power output

• Automatic shutdown to protect engine • Convenient recoil and electric start • Lightweight, high power output

8.5kw

$1858

6.25kw

$2079

8.75kw

INVERTER GENERATOR (R2000iS)

INVERTER GENERATOR (R3000iE)

• Quiet, lightweight and can run for up to 6 hours on continuous • Ideal for powering small electrical devices • Free shifting between 50Hz and 60Hz

• Electric and recoil start for convenience and ease of use • Free shifting between 50Hz and 60Hz • Lightweight and low noise level

2.0kw

3.3kw

$1069

PORTABLE PUMP (RT25ZB20-1.2Q) • Cast iron impeller • Recoil start • Lightweight

$2399

$305

Powering True Independents

$1699

SINGLE IMPELLER (RT50YB50-3.8Q) • 7hp engine • Recoil start • Rugged full frame

$539

TWIN IMPELLER (RT50YB80-3.8Q) • 7hp engine • Recoil start • Rugged full frame

$620

12 month /500 hour

Domestic Warranty

12 month /500 hour

Commercial Warranty

INVERTER GENERATOR (R2000iS)

TWIN IMPELLER HIGH PRESSURE PUMP (RT50YB80-3.8Q)

• Ideal for powering small electrical devices • Free shifting between 50Hz and 60Hz • Quiet, lightweight and can run for up to 6 hours on continuous

• 4 stroke OHV single cylinder engine with recoil start • Cast iron cylinder liner ensures consistent performance and durability • Rugged full frame protection

2.0kw

$1069

Powering True Independents

7hp

$620

$2499

$1799 BONUS

BONUS

Tool Chest

9 Drawer 174 Piece

• 1/4, 3/8 & 1/2" Drive Sockets & Accessories • Combination Spanners • Screwdrivers • Striking and Prying • Full range of Hand Tools and much more...

METRIC IMPERIAL

174

PIECE

9 DRAWER

FREE 12 MONTH PROTECTION

PLAN

P1915B

ON EVERY KINCROME TOOL KIT

BONUS

BLACK

Tool Workshop 9 Drawer 281 Piece

METRIC IMPERIAL

• 1/4, 3/8 & 1/2" Drive Sockets & Accessories • Combination Spanners • Screwdrivers • Striking and Prying • Full range of Hand Tools and much more...

14

281

PIECE

DRAWER

6

FREE 12 MONTH

P1927B

PROTECTION

PLAN ON EVERY KINCROME TOOL KIT

$399

$299 TOOL WORKSHOP

96

METRIC

$259

• 19 x 1/2” Drive Metric Sockets • 2 Spark Plug Sockets • 2 TorqueMaster® Screwdrivers • 5 Pliers • TORX® Bits • Ball Point Long Hex Key Set & much more…

K1865

94

PIECE

METRIC

$105

• Metric Sizes: 6 - 24mm • Imperial Sizes: 1/4” - 1 K3030

$149

$29

P1991MBB

• Large LED screen • Carry pouch included • Temperature range: -50 - 880oC (-58~1616oF) • 9-Point laser point location K11112

• Combination Plier 200mm (8”) • Long nose Plier 200mm (8”) • Diagonal Cutting Plier 175mm (7”) • Multigrip Plier 250mm (10)” K4221

$99 K5617

PHILLIPS & BLADE

Phillips PH2 x 100mm (slim) Blade 5.5 x 125mm (slim)

68 PIECE

• Heavy duty aluminium & steel construction • Moulded grips • 6 x mandrels (M3, M4, M5, M6, M8, M10) K4900

Powering True Independents

13 DRAWER

4 PIECE

K5618

SCREWDRIVER SETS

NUT RIVETER KIT TWIN HANDLE

546

• 1/4, 3/8 & 1/2" Drive Sockets & Accessories PIECE • Combination Spanners • Screwdrivers • Air Impact Tools & Sockets • Striking & Prying 10 • Full range of Hand Tools and much more...

PLIER SET

• Internal - Bent 175mm (7”) • Internal - Straight 175mm (7”) • External - Bent 175mm (7”) • External - Straight 175mm (7”) • Flag Tip 175mm (7”) K4040 FROM

546 Piece 1/4, 3/8 & 1/2" Drive

$72

5 PIECE

30 PIECE

Tool Workshop

12:1 SPOT RATIO

CIRCLIP PLIERS COMBINATION SPANNER SET

METRIC IMPERIAL

INFRARED THERMOMETER

94 PIECE 1/2" DRIVE

PIECE

SERIES

$89

TOOL WORKSHOP

96 PIECE 3/8" DRIVE

• 15 x 3/8” Drive Metric Sockets • 11 x 3/8” Drive Imperial Sockets • Security Bit Holder Set 33 Piece 1/4” Hex Drive • 4 TorqueMaster® Screwdrivers • Pliers & Wrenches • Bit Set 36 Piece • Metric Hex Keys 9 Piece & much more…

K1850

$5999

K5615

2900

K5615

$

K5617 Blade 3.5 x 100, 5.5 x 125mm Phillips PH1 x 80mm, PH2 x 100mm (slim) K5618 3.5 x 100, 4.0 x 100, Blade 5.5 x 125, 6.5 x 150mm

$

Phillips PH1 x 80, PH2 x 100mm (slim)

4900 6900

$

COMPACT FOLDING SAW HORSE 760MM

• Heavy duty steel construction • Bamboo bench top • Quick release folding legs • Load capacity: 350kg K14112

CrMo

STEEL

THE SCREWDRIVER PERFECTED BALL HEX

$39 4 95

PIECE

SCREWDRIVER SET BALL HEX K5588

3 x 100mm 4 x 100mm 5 x 100mm 6 x 125mm

PHILLIPS

TORX®

$39 4

$39 4

95

95

PIECE

$179

PIECE

SCREWDRIVER SET

SCREWDRIVER SET

PHILLIPS No.0 x 75mm No.1 x 75mm No.2 x 100mm No.2 x 38mm

TORX® T25 x 100mm T27 x 100mm T30 x 100mm T40 x 100mm

K5518

K5578

TAP & DIE SETS

24 PIECE EACH • METRIC • 11 Dies • 11 Taps • 1 Die Handle • 1 Tap Wrench K12024 • IMPERIAL • 11 Dies • 11 Taps • 1 Die Handle • 1 Tap Wrench K12025

PARTS WASHER

12 LITRE • Ideal for small workshop and home garage • Mounted recirculating pump and flexible spout • Sturdy all steel construction and powder coated K13087

Powering True Independents

$85 EACH

DEEP HOLE CLOG FREE MARKER SET WITH SITE HOLSTER | 1X BLACK, 1X BLUE & 1X RED CODE: ACF-MK3

DEEP HOLE CONSTRUCTION PENCIL WITH SITE HOLSTER CODE: ADP2 The perfect tool for Carpenters, Joiners, Kitchen Fitters and DIY enthusiasts alike. Thanks to its unique 120mm retractable, interchangeable leads, the Tracer deep hole pencil can mark through beams & joists with ease.

Available as a set of black, blue and red. The Tracer ClogFree Marker has the ability to mark on almost every surface, including dusty and shiny surfaces. Always to hand with Tracer site holster.

$19

$30

29 UP TO 15MM DIA

CARPET & HEAVY SHEET MATERIALS

BLACK PANTHER MULTI-PURPOSE SCISSORS

165MM ULTIMAX PRO BLACK PANTHER GEN II: CABLE CUTTERS

CODE: 29-803 • High quality Japanese steel blades • Scissor sheath for safe carrying and storage

CODE: 29-514 • Ideal for cutting and stripping copper and aluminium cable up to 15mm diameter

$29

89

AMBIDEXTROUS!

$24

49

COMFORT GRIP!

10" BLACK PANTHER SUPER SHEARS CODE: 29-904 • Angled handles keep hands above carpet and other sheet materials

$35

SUPER TOUGH

HEAVY DUTY BLADE DISPENSER (X100)

AUTO-LOADING RETRACTABLE KNIFE CODE: 112-1 Autoloading knife makes the hassle of changing blades a thing of the past. The new blade loading and ejecting system from Sterling lifts the standards for trimming and cutting knives.

CLOG FREE

CODE: 921-2D

$16

BONUS BLADES INSIDE

Powering True Independents

Made from high Carbon alloy steel precision ground and sharpened to a razor edge, Sterling 921 Heavy Duty blades provide maximum sharpness and durability.

$32

MADE IN SHEFFIELD UK

ULTIMAX PRO TAPE MEASURE: 8M METRIC CODE: TMFX8027 • Wide blade extended standout • 4 rivet dual-hook

SUPERIOR INTERNAL MECHANISM

$2349 STANDOUT!

TKTAPE8

TKFEL

FOLADABLE TRIMMING KNIFE • Aluminium handle • Easy lock blade

$9

99

$9

99

8M TAPE MEASURE • Dual scale 25mm blade • Self Locking

TKFF8

TKSDSI2

UNDER $10 TOOL SALE! HUGE RANGE AVAILABLE 2 PIECE SCREWDRIVER SET • 1 x Flat Head • 1 x Phillips Head

$9

99 AWC8

8” (200mm) ADJUSTABLE WRENCH

$899 Powering True Independents

8” (200mm) FLAT FILE

$6

99

22 PIECE T BAR SOCKET BIT SET • 1/4 Hex Drive

$999

TB22M

SPT1

SSMR

SCRAPER METAL • I ncludes 5 spare blades • TPR grip

$899

SPARK PLUG T BAR TOOL • 5/8” (16mm)

$899

MW-520-01

COMBINATION SET 300MM • Square head, protractor head and centre head • Hardened and ground slide way • Stainless steel rule with engraved graduations

$179 BEST VALUE

YOUR PARTNER IN PRECISION MEASURING

MW-CSM300

TRADITIONAL PRECISION COMBINATION SET METRIC 300MM • Fully hardened & ground cast iron heads • Centrally mounted protractor vial allows unrestricted viewing • Satin chrome scale plate on protractor

$329 HOT BUY

Powering True Independents

YOUR PARTNER IN PRECISION MEASURING

MW-CSM300

TRADITIONAL PRECISION COMBINATION SET METRIC 300MM • Fully hardened & ground cast iron heads • Centrally mounted protractor vial allows unrestricted viewing • Satin chrome scale plate on protractor

Powering True Independents

$329 HOT BUY

YOUR PARTNER IN PRECISION MEASURING

MW-520-01

COMBINATION SET 300MM • Square head, protractor head and centre head • Hardened and ground slide way • Stainless steel rule with engraved graduations

Powering True Independents

$179

UNBEATABLE

P&N WORKSHOP PROMOTIONAL SETS ARE DESIGNED TO SUIT A RANGE OF APPLICATIONS FOR TRADESMEN & DIY HOBBYISTS. ALL PACKED IN AN EASY TO ACCESS HARD WEARING CASE.

NEW

NEW 30PC TINITE TIP DRILL SET

5PC 4-FLUTE AUGER BIT SET

165399016

165399010

• Increased wear resistance for 3X longer life • 135° self-centring split point • Radius flute edge for increased chip evacuation • Drill depth indicator for precise hole depths • Suitable for wood, metal & plastic • Sizes: 1.0 - 13.0mm x 0.5 rises PLUS 3.0, 3.3, 4.0, 4.2 & 5.0mm

• Designed for machine & hand drilling into hard & soft wood • Four cutting edges makes cutting faster than conventional spade bits • Sizes: 16, 19, 22, 25 & 32mm

$135

$65

WHILE STOCKS LAST!

NEW 38PC DRILL & DRIVER SET 165399009

10PC BRIGHT DRILL SET

NEW

165399011 • For drilling in metal, wood & plastic • Made from High Speed Steel • Sizes: 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0, 8.0 & 10.0mm

$3995

10PC COBALT DRILL SET 165399012 • Made from M35 High Speed Steel • For drilling in stainless steel, copper, brass, cast iron & wood • Sizes: 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0, 8.0 & 10.0mm

NEW

$45

• 7Pc Hex Drill Bits: 2, 2.5, 3, 4, 5, 6 & 6.5mm • 1Pc Quick Change Bit Holder: 1/4" x 60mm • 6Pc Nutsetter x 45mm: 2 x 1/4", 2 x 5/16", 2 x 3/8" • 24Pc Screwdriver Bits: 2 x SL4 25mm, 2 x H5 25mm, 4 x PH2 25mm, 3 x H5 50mm, 7 x PH2 50mm, 3 x T40 50mm, 3 x R2 50mm

$55

NEW 17PC BRIGHT DRILL SET + STEP DRILL + COUNTERSINK 165399013 • 15Pc Bright Drills: 2 x 1.5, 2.0, 2.5mm, 1 x 3.0, 3.2, 3.5, 4.0, 4.5, 5.0, 6.0, 8.0 & 10.0mm • Step Drill: 4 - 20mm • Countersink: 13mm

NEW

$69

Powering True Independents

17PC COMBINATION DRILL SET 165399014 • 5Pc Masonry Drill Bits: 3.0, 5.0, 6.0, 8.0 & 10.0mm • 12Pc HSS Drill Bits: 1.5, 2.0, 2.5, 3.0, 3.2, 3.5, 4.0, 4.5, 4.8, 5.0, 5.5 & 6.0mm

21PC DRILL & DRIVER SET

NEW

$49

165399015 • 7Pc Hex Drill Bits: 1.5, 2, 3, 4, 4.5, 5, 6mm • 1Pc Quick Change Chuck 60mm • 3Pc Nutsetter x 36mm: 1/4", 5/16", 3/8" • 10Pc Screwdriver Bits: 4 x PH2, 3 x H5, 3 x R3

$32

wi

th

AS 1

788:1

-1987 EN124 �

13

MADE I N

EUROPE

MA X. R

0 m/s 0 8 ,25 12

Co

m

ies

PM

pl

Metal – Stainless Steel IN OX IRON FREE

oSa

Reinforced

CERTIFIED

XTRA PERFORMANCE

125

XT

13

38

3 Dan

ge r: D

o no t

.

eel wh of

A46SBF

29 PIECE

c n e o r re . 1 s. c tl y /3 . di am e te r

RA

x1.0x22.23mm

25 PIECE

d te i u n ac h in mo m m b e n all be t st m u d o us e e l s e u s e es m g b g wh Warning : C ut ti n M U ST . Flan s d d r e a u Metal g s pe saf e ex c e e d m a x i m u m

XTRA 125 X 1.0MM CUTTING DISC 100 PACK TUB | FREE SNIPS CODE: GCDGX12510-100BP

METRIC GOLD SERIES TUFFBOX DRILL SET

IMPERIAL GOLD SERIES TUFFBOX DRILL SET

CODE: SM25PB • 1.0 - 13.0 in 0.5mm increments • Genuine Alpha Gold Series Jobber Drill Bits

CODE: SI29PB • 1/16 - 1/2” in 1/64” increments • Genuine Alpha Gold Series Jobber Drill Bits

$14949

• QTY100 x 125 mm x 1.0 mm x 22.23 I.D mm supplied in a reuseable bucket • High Quality, Stainless Steel grade cutting discs

BONUS SNIPS

$195

$179 WOOD WITH NAILS

EXTREME: WOOD WITH NAILS BLADE

POLYCRYSTALLINE DIAMOND BLADE

• Engineered for extreme performance, giving up to 6x the life of a standard saw blade • Premium European hi-density carbide for extreme durability and cutting life

Specifically designed for fiber cement ripping and crosscutting. The polycrystalline diamond tips can run up to 50-100 times longer than carbide blades

Code

Size

Bore

Teeth

Code

Size

Bore

Teeth

PCD160

160mm

20/16mm

4PCD 4TCT

$105

TBPP1652024

165mm

20/16mm

24T

$27.50

PCD185

185mm

20/16mm

4PCD 4TCT

$115

TBPP1652040

165mm

20/16mm

40T

$32.50

PCD205

205mm

25mm

6PCD 6TCT

$136

TBPP1852024

185mm

20/16mm

24T

$30.00

PCD235

235mm

25/20mm

6PCD 6TCT

$162

185mm

20/16mm

40T

$33.50

PCD250

250mm

25.4mm

6PCD 6TCT

$245

TBPP2352520

235mm

25mm

20T

$37.00

PCD300

300mm

25.4mm

8PCD 8TCT

$275

TBPP2352540

235mm

25mm

40T

$45.50

PCD350

350mm

25.4mm

8PCD 8TCT

$330

TBPP1852040

Extreme: Wood with Nails Blade

6 PCE CLEANABLE

Nutsetters

1/4″ 5/16″ 3/8″

THUNDER

INTERCHANGEABLE for more tooling combinations

CLEANABLE easy removal of swarf

50x LIFE

DRILL + TAP!

IM

PA CT

REMOVE SOCKET TO CLEAN

THUNDERMAX 10 PIECE DRIVER BIT SET CODE: TBS10TM Contains: • 4x PH2 x 50mm • 1x SQ2 x 50mm • 1x SQ3 x 50mm • 2x HEX5 x 50mm • 1 x Nutsetter 5/16” x 65mm • 1 x Nutsetter 3/8” x 65mm

25 PIECE COMBINATION DRILL & TAP SET | GOLD SERIES

Magnetic

Ideal for cordless drills INTERCHANGEABLE for more tooling combinations

$18

49

EXTREME TORSION

Powering True Independents

CLEANABLE NUTSETTER 6 PIECE SET CODE: NSSMC-SET6 Contains: • 3 x Nutsetter sockets: 1/4″, 5/16″ & 3/8″ • 3 x Lengths: 65, 100 & 150mm

$2749 CLEANABLE

CODE: CDT25PB • 13 x Combination Drill and Taps: Metric Coarse: M3 - M10 | UNC: 6G 12G, 1/4” - 3/8” • 12 x Gold Series Hex Shank Drills Metric: 2.0 - 6.5mm

$200

DRILL AND TAP!

LXAH2000PR

BONUS RECIPROCATING BLADES

BIG DADDY™ 26 PIECE HOLESAW KIT WITH RECIPROCATING SAW BLADES KIT INCLUDES • T3 SPEED SLOT Hole Saws: 19mm, 22mm, 25mm, 29mm, 35mm, 38mm, 45mm, 51mm, 54mm, 57mm, 64mm, 68mm, 76mm, 83mm, 86mm, 92mm, 95mm,105mm, 114mm, 121mm • Standard Arbors: 1L, 2L, 5L • 3 x Pilot Drills • 5 x 656R Bi-Metal Reciprocating Saw Blades • 5x 618R Bi-Metal Reciprocating Saw Blades

1821376

SHARP PRICE!

13 PIECE MULTI-PURPOSE RECIPROCATING BLADE KIT IN CASE KIT INCLUDES • 3x 152x19x.9mm 635R General Purpose Blades • 3x 152x19x.9mm 610R Wood and Metal Blades • 2x 203x19x.9mm 850R Fire & Rescue Blades • 3x 203x19x.9mm 818R Metal Blades • 2x 229x22x1.6mm 966R Demolition Blades

$38

99

Powering True Independents

$299

Klingspor

Abrasive Technology

Good. Safe. Klingspor.

ZIRCONIA FLAP DISCS 125x22mm 322771 - 125x22x36# 322772 - 125x22x40# 322774 - 125x22x60# 322775 - 125x22x80# 322776 - 125x22x120#

SMT624

LOW SPEED CUTTING WHEELS

A630N

Available in the following sizes: 353325 - 300x2.5x25.4 @ $7.29 each 353324 - 356x2.5x25.4 @ $10.49 each 353328 - 406x3.2x25.4 @ $14.09 each

Other sizes available

SMT 624 SUPRA • Aggressive stock removal rate & comfortable grinding behaviour • For universal use in demanding grinding work on steel & stainless steel

Powering True Independents

125mm

$6

59

A 630 N SUPRA • Aggressive with an outstanding service life • An exceptional choice for the cutting of solid material • Minimal burr formation

FROM

$7

29

TBDD45

DGD125DC

Also Available in 105mm & 175mm Sizes

NEW SIZE 45MM

125mm DOUBLE ROW GRINDING WHEEL Tornado Dry Drill Bit 45mm • Suitable for the dry drilling of porcelain, marble, granite, ceramic, limestone, slate, terracotta, fiberglass, travertine and masonry

• Designed for dry grinding, levelling and shaping of concrete

$89

$99

95

CDB105

TT125

Also Available in 115mm & 125mm Sizes

TB230

Also Available in 105, 115, 200 & 255mm Sizes

125mm

105mm

230mm

105mm Cyclone Diamond Mesh Blade

125mm White Lightning Turbo Diamond Blade

230mm Boss Turbo Blade

• Diamond mesh blade designed for precision cutting of porcelain tiles with reduced chipping of tiles

• Cuts cleanly and precisely • Wet or dry use • Extra core strength

• Cuts cleanly and precisely • Wet or dry use • Applications include slate, marble and granite

$2495

$2795

TBDD06

WP900

$6995

DEC125

125mm

6mm

Tornado Dry Drill Bit 6mm

Wet Polisher 900watt

125mm Dust Extractor Shroud

• Suitable for the dry drilling of porcelain, marble, granite, ceramic, limestone, slate, terracotta, fiberglass, travertine and masonry

• Max Disc Diameter: 125mm • Safety cut off switch • No-load speed:700-3000rpm • H Shape handle • Rated frequency:50/60hz • Variable speed

• Designed for use with most 100mm-125mm grinders Brush base provides support for a cushion action • Made from a durable rubber material

$4995 Powering True Independents

$329

$79

AC24050

BONUS WHITEHOSE30

SENCO LOW NOISE COMPRESSOR • Senco 50L Low Noise Compressor 2HP •A ir Hose. 10mm x 30mtr Roll with fitted Nitto type adaptor.

$799 FIP35MG

BONUS THERMO BOTTLE

SENCO FinishPro 35Mg • DA Finish Nailer 32-65mm • 1 Year warranty • SENCO Thermo Bottle included

$329 Powering True Independents

SPECIAL OFFERS ON DA SERIES BRADS 32mm

BOX OF 3000

38mm

BOX OF 3000

45mm

BOX OF 3000

50mm

BOX OF 3000

65mm

BOX OF 3000

Powering True Independents

AIRCO DA SERIES BRADS 32MM

BD15321

• Electro Galvanised • Box of 3,000

AIRCO DA SERIES BRADS 38MM

BD17381

• Electro Galvanised • Box of 3,000

AIRCO DA SERIES BRADS 45MM

BD19451

• Electro Galvanised • Box of 3,000

AIRCO DA SERIES BRADS 50MM

BD21501

• Electro Galvanised • Box of 3,000

AIRCO DA SERIES BRADS 65MM

BD25641

• Electro Galvanised • Box of 3,000

$33 $33 $33 $38 $48

$2

95

PREDATOR BI METAL HACKSAW BLADES • • • •

Will stay sharper longer whilst cutting materials including Stainless Steel Precision ground teeth to offer superior cutting speed & life Positive rake angle & a smooth gullet Shatterproof

EACH

PART #

SIZE

EC-AA45EPRED

18 TPI

EC-AA46VPRED

24 TPI

EC-AA47RPRED

32 TPI

BEST BUY

PROFESSIONAL WORKHOLDING SOULTIONS FOR EVERY JOB Powering True Independents

BBEG141005

BBEG14755

75mm

100mm

500 PACK

500 PACK

$75

BUGLE BATTEN TYPE 17 • 14g X 75mm • TUB of 500 • Class 3 Galvanised

BBEG141003

BUGLE BATTEN TYPE 17 • 14g X 100mm • Tub of 500 • Class 3 Galvanised

BBEG14753

$22

49

BBEG14150303

BUGLE BATTEN TYPE 17 • 14g X 75mm • TUB of 100 • Class 3 Galvanised

$24

Powering True Independents

89

100 PACK BUGLE BATTEN TYPE 17 • 14g X 125mm • TUB of 100 • Class 3 Galvanised

65mm 100 PACK

100 PACK UGLE BATTEN TYPE 17 • 14g X 50mm • TUB of 100 • Class 3 Galvanised

$22

BBEG141653

50mm

100 PACK • 14g X 150mm • TUB of 100 • Class 3 Galvanised

$19

BBEG14503

150mm UGLE BATTEN TYPE 17

125mm

100 PACK

100 PACK

• 14g X 100mm • TUB of 100 • Class 3 Galvanised

BBEG141253

75mm

100mm BUGLE BATTEN TYPE 17

$85

$10

49

UGLE BATTEN TYPE 17 • 14g X 65mm • TUB of 100 • Class 3 Galvanised

$21

23GBCW14075

500 Pieces

METAL BATTEN SCREW GALVANISED • • • •

14G-10x75mm Bugle Self Embedding Head 5mm Hex Drive Wings cut a “clearance” hole to help avoid screw breakage when the timber and steel expand and contract at differing rates

23GBCW14050

$149

ALSO AVAILABLE: 14G-10x50mm - 1000pcs $219 Powering True Independents

17GCSQ1840

100 Pieces

POST SUPPORT SCREW GALVANISED • • • •

18G-8x40mm Button Head T40 Torx drive Type 17 point

17GCSD1840

$49

ALSO AVAILABLE: Clam Pack - 24pcs $14.89 Powering True Independents

We’ve been manufacturing cement right here in Australia since 1890

PROSTRENGTH® EXTRA STRENGTH CONCRETE MIX

FASTER STRENGTH GAIN STRONGER FINISHED SURFACE

CEMENT AUSTRALIA PROStrength® Extra Strength Concrete Mix 20kg • Twice as strong as standard Concrete Mix • Reduced efflorescence • Reduced cracking • Reduced incidence of algae and moss growth

Powering True Independents

480874

500693

15 LITRE

SIKA® AQUA BLOK® WPU • Fibre reinforced • Highly flexible • Ready to use, no mixing required

5 LITRE

SIKAFLOOR® LEVEL PRO PRIMER

Ask instore for a great price!

• Seals porous concrete • Ready to use, no mixing required • High moisture tolerant

Ask instore for a great price!

529468

411020

20kg

SIKAGROUT®212 HP • Dual shrinkage compensated • High early strengths • Flowable consistency

Powering True Independents

Ask instore for a great price!

20kg

SIKAFLOOR® LEVEL TOP • Self levelling and smoothing • Good pot life and working time • Pump or manual application

Ask instore for a great price!

SEE IN STORE FOR PRICING

LIGHTER. STRONGER. SMARTER. • Lightweight, easy to install and handle • Consistent core that’s easy to score and snap

20KG

20KG

BASECOTE 45 20KG

CORNICE 45 20KG

• Consistent working times • Easy Mixing • High Strength Bond

• Easy Mixing • High Adhesion • Excellent Wet Tack

$4449

$4199 20KG

Powering True Independents

12KG

FINALCOTE 20KG

TOTAL JOINT FINISH 12KG

• Easy Application • Easy Sanding • Smooth Finish

•P remixed All Purpose Joint Compound • Easy Application • Smooth Finish

$4299

$4479

SEE IN STORE FOR PRICING

SEE IN STORE FOR PRICING

10MM SHEETROCK WALL BOARD

10MM WETSTOP

• Lightweight, easy to install and handle • Easy Score and Snap

• For use in Wet Areas such as Bathrooms and Laundries • Lightweight and easy to handle

10KG

10KG

BASECOTE 45 10KG

$32

49

• Consistent working times • Easy Mixing • High Strength Bond

$27

49

$15

Powering True Independents

$15

29

$22

99

•P remixed All Purpose Joint Compound • Easy Application • Smooth Finish

STUD ADHESIVE 1.3KG • Easy to use • Rapid Tack • Tough Bond

1.5KG

TOTAL JOINT FINISH 4.8KG

FINALCOTE 4.8KG

99

• Easy Mixing • High Adhesion • Excellent Wet Tack

4.8KG

4.8KG

•P remium Finishing Compound • Easy Sanding • Smooth Finish

CORNICE ADHESIVE 45 10KG

1.3KG

$10

49

PATCHING PLASTER 1.5KG • For Repairing Holes & Cracks in Plasterboard • 45min Working Time

CEN1000S2

CENTAUR ELECTRIC TILE CUTTER 1000MM • Ideally suited for tiles • 1800 watt direct drive motor • 250mm porcelain blade • 45° mitre cuts • Porcelain, critically hard and granite up to 15mm • Soft stone up to 25mm

Powering True Independents

$1699

LIPC100

LIPS100

100 PACK

100 PACK Lippage Yellow Spacer Curved 100 Pack • Use in conjuction with lippage caps • Made of nylon • Designed to level lippage on tiles when laying

$19

95

Lippage Red Caps 100 Pack • Use in conjuction with lippage spacers • Caps are reuseable • Designed to level lippage on tiles when laying

$22

95

LIPK100

LIPTL

STARTER

KIT

Lippage Levelling Gun • To be used with lippage system • Ensures correct tension on spacer and cap • Lightweight durable construction

Powering True Independents

$44

95

Lippage Starter Kit Includes:• Lippage levelling gun • 100 lippage caps • 100 lippage spacers

$69

95

22-291

BSTR10

GC750C

10mm

750ml

BRIGHT STEEL ADHESIVE 10mm TROWEL

TILE GROUT REMOVER • Twin blade design enables grout removal from wide or tight joints

$1895

• Dual square notch edge design • Stainless Steel rivets • Rubber contoured handle

$1795

Also available in 4mm, 6mm, 8mm, 12mm, & 15mm

CITRUS GROUT CLEANER • Heavy-duty formula • Effectively cleans and deodorises tiles and grout

$1695 HRPT

TILE SPONGE

TILE & SLATERS SPONGE • 300 x 200 x 40MM • Ideal for cleaning large tiled and slate after grouting

$13

GPMS

TSS128

95

RUBBER POINTED TROWEL • Lightweight and durable rubber base with comfortable handle

QSTK

$16

95

PTC-600

GLUE MIXER SMALL • Nickel plate steel construction •U se with an electric drill for fast and effective mixing

TRADE TILE CUTTER 600mm QUIK SWITCH KIT

$2395 Powering True Independents

• 2 part system comprising of handle and interchangeable bases

$8995

•H-Shaped steel rail for extra strength • 6 piece bearing loaded handle • Non-slip rubbet cut bed • Aluminium extruded base construction

$229

PAINT & REPAIR

TRADE QUALITY METAL PROTECTION.

VARIOUS

LONG LASTING FORMULAS FOR PROTECTION AGAINST RUST AND CORROSION.

$15

95

Powering True Independents

EACH

Clear

Powering True Independents

41015000

Matt Black

41015001

Red

41015002

Blue

41015003

Green

41015004

Yellow

41015005

Orange

41015006

White

41015011

Grey

41015013

Flat Black

Powering True Independents

230932101

Flat White

230932111

Satin Black

230932201

Aluminium

230932210

Gloss Black

230932301

Signal Red R13

230932302

Ocean Blue

230932303

Brunswick Green

230932304

Golden Yellow Y14

230932305

Orange X15

230932306

Primrose

230932309

Silver

230932310

Gloss White

230932311

Pewter Grey N63

230932313

USGGY

RUST & CORROSION PROTECTION TOUCH UP PAINT

ULTRACOLOR SPRAY GALV - 350g • Touch-up paint • Fast dry • Industrial strength • Long term protection against rust & corrosion

$9

99

Powering True Independents

EACH

FIRMASOFTTM INSULATION RANGE • Soft to handle • Firm fitting • Superior performance

Australian Made

FROM

INTRODUCING THE NEWEST BATT TO OUR FIRMASOFTTM INSULATION RANGE FIRMASOFT TM R2.5HD WALL BATT • Soft to handle • Made in Australia • Low dust formula

FROM

$59

$44

PER PACK

900281

WALL - R1.5 1160 x 430 x 70 (11.0m2)

$44

900280

WALL - R1.5 1160 x 580 x 70 (14.8m2)

$58

900282

WALL - R2.0 1160 x 430 x 90 (11.0m )

$58

900283

WALL - R2.0 1160 x 580 x 90

$63

900293

WALL - R2.5HD 1160 x 580 x 90

$78.90

900286

CEILING - R3.5 1160 x 430 x 175 (8.0m2)

$55

900287

CEILING - R3.5 1160 x 580 x 175 (6.7m2)

$47

2

Perfectly Balanced

NEW

New FirmaSoft™ for easy installation and performance

89

• Soft to handle

• Made in Australia

• Stay firmly in place

• Up to 80% recycled content

• Low dust formula

• Non-combustible

insulation.com.au

900292

PINK®BATTS INSULATION RANGE

Australian Made

• Easy to cut & install • Fits & holds in place • Better recovery

FROM

Powering True Independents

$42

PER PACK

900166

WALL - R1.5 1160 x 430 x 70 - 24PK

$52.50

900167

WALL - R1.5 1160 x 580 x 70 - 24PK

$67.75

901217

WALL - R2.0 1160 x 430 x 90 - 24PK

$56

901218

WALL - R2.0 1160 x 580 x 90 - 24PK

$76

900253

WALL - R2.5HD 1160 x 430 x 90 - 12PK

$63

901355

CEILING - R3.5 1160 x 580 x 175 - 10PK

$43

901414

CEILING - R4.1 1160 x 430 x 195 - 10PK

$42

Star can wins again!

BLUE

Haymes Paint ranked No 1. in the Canster Blue Paint Ratings for overall customer satisfaction three years in a row. Also voted Haymes Paint No. 1 for durability, value for money, quality of finish and range.

Protection from the Aussie sun.

EXPRESSIONS ULTRA PREMIUM INTERIOR • 7yr mould and mildew protection • Mark and stain resistance • Exceptional coverage

Powering True Independents

$84

90

SOLASHIELD ULTRA PREMIUM EXTERIOR • 20 Year Guarantee • Ultimate UV protection • Repels dirt and mould

$84

90

CONCRETE SEALER • Tough, durable finish • Resistant to hot tyre pick-up • Same day recoating

Powering True Independents

$80

99

CONCRETE SEALER • Tough, durable finish • Resistant to hot tyre pick-up • Same day recoating

Powering True Independents

$80

99

Star can wins again!

BLUE

Haymes Paint ranked No 1. in the Canstar Blue Paint Ratings for overall customer satisfaction three years in a row. Also voted Haymes Paint No. 1 for durability, value for money, quality of finish and range.

EXPRESSIONS ULTRA PREMIUM INTERIOR • 7yr mould and mildew protection • Mark and stain resistance • Exceptional coverage

Powering True Independents

$84

90

30004334

JOHNSTONE’S EXTERIOR DECK OIL - 4L RANGE • Recoat in an hour • Aqua Protect 12 month Guarantee • Superior UV protection •A vailable in Natural, Jarrah, Teak or Merbau

$106

49

THE NEW STANDARD IN DECKING.

RECOAT IN

Powering True Independents

1 HOUR

UNI-PRO FRESH COAT 38mm SASH CUTTER BRUSH

UNI-PRO FRESH COAT 50mm SASH CUTTER BRUSH

UNI-PRO FRESH COAT 63mm SASH CUTTER BRUSH

Product Code - 6238

Product Code - 6250

Product Code - 6263

• Solid round tapered filament has excellent paint pick-up and release properties • Lightweight, low fatigue, composite handle • Stainless steel ferrule

• Solid round tapered filament has excellent paint pick-up and release properties • Lightweight, low fatigue, composite handle • Stainless steel ferrule

• Solid round tapered filament has excellent paint pick-up and release properties • Lightweight, low fatigue, composite handle • Stainless steel ferrule

$649

$779

$1049

UNI-PRO FRESH COAT 75mm SASH CUTTER BRUSH Product Code - 6275 • Solid round tapered filament has excellent paint pick-up and release properties • Lightweight, low fatigue, composite handle • Stainless steel ferrule

$1349 Powering True Independents

UNI-PRO 270mm UNIFIBER ROLLER COVER 6 PACK

UNI-PRO 7 PIECE 230mm STARTER KIT Product Code - FF4170

Product Code - 17005 • 11mm nap fabric is thermally bonded to the core for extra solvent resistance • Shed resistant unifiber roller sleeves • End capped to stop paint spills

$2089

• Includes: 230mm heavy duty roller tray • Heavy duty cage frame • 10mm nap microfibre cover • 50mm smooth coat brush • Protection sheet • Wooden paint stirrer • Can opener

$3689

KRAFT MASKING PAPER 144mm X 40mt SINGLE ROLL

KRAFT MASKING PAPER 288mm X 40mt SINGLE ROLL

Product Code - 140

Product Code - 141

• Strong, non-absorbent paper • Single rolls, 40 metres total

• Strong, non-absorbent paper • Single rolls, 40 metres total

UNI-PRO 30-DAY MASKING TAPE GREEN 24mm x 50mt

UNI-PRO 30-DAY MASKING TAPE GREEN 36mm Product Code - 70736

UNI-PRO 30-DAY MASKING TAPE GREEN 48mm x 50mt Product Code - 70748

UNI-PRO 3 PACK 30-DAY MASK GREEN 36mm x 50mt Product Code - 70750

• UV resistant, waterproof paper masking tape • Suitable for use with all paints • Super sharp edges, no bleed

• UV resistant, waterproof paper masking tape • Suitable for use with all paints • Super sharp edges, no bleed

• UV resistant, waterproof paper masking tape • Suitable for use with all paints • Super sharp edges, no bleed

$689

Product Code - 70724

$1189

$889

Powering True Independents

$1189

• UV resistant, waterproof paper masking tape • Suitable for use with all paints • Super sharp edges, no bleed

$595

$2589

18263

18363

OVAL CUTTING BRUSH

ANGLE CUTTING BRUSH CLASSIC SASH CUTTER 63mm

CLASSIC ANGLE SASH BRUSH 63mm

• Quality synthetic filament • Maximum paint pick-up and release • Use with all paints

• Quality synthetic filament • Maximum paint pick-up and release • Use with all paints

$8

$8

95

18125

18138

95

18150

CEILINGS, WALLS & DOORS

DETAIL & TRIM

DETAIL & TRIM

CLASSIC WALL BRUSH 25mm

CLASSIC WALL BRUSH 38mm

CLASSIC WALL BRUSH 50mm

• Quality synthetic filament • Maximum paint pick-up and release • Use with all paints

• Quality synthetic filament • Maximum paint pick-up and release • Use with all paints

• Quality synthetic filament •M aximum paint pick-up and release • Use with all paints

$395 18163

$495 18175

CEILINGS, WALLS & DOORS

18188

CEILINGS, WALLS & DOORS

CLASSIC WALL BRUSH 63mm

CLASSIC WALL BRUSH 75mm

• Quality synthetic filament • Maximum paint pick-up and release • Use with all paints

• Quality synthetic filament • Maximum paint pick-up and release • Use with all paints

$795 Powering True Independents

$595

$995

CEILINGS, WALLS & DOORS

CLASSIC WALL BRUSH 88mm • Quality synthetic filament • Maximum paint pick-up and release • Use with all paints

$1095

Gets The Job Done 15019031

MAX BOND ORIGINAL CONSTRUCTION ADHESIVE BUCKET • High bond strength and heat resistance • Up to 20 mins reposition time • Bridges small gaps - great for uneven surfaces

Powering True Independents

$69

20x 320g CTGS

85001667

15019103 15019277

FULLER TRADE PLUMBING SILICONE SEALANT • • • •

Potable water approved Neutral cure High flexibility +/– 25% Available in grey and translucent

$5

49

EACH

300g/400g CTG

Tough Red Caulking Gun •1 8:1 compression ratio - ideal for high viscosity adhesives & sealants • Suitable for 300ml cartridges • 5mm stroke

Gets The Job Done Powering True Independents

$19

99

HEAVY DUTY

MULTIBOND SMX25 FLEX & SEAL - 290ml

MULTIBOND SMX50 SEAL & STICK - 290ml

• Highly flexible and elastic • Available in concrete grey, white or black

• Trafficable •A vailable in concrete grey, white or black

$8

49

Powering True Independents

$9

49

GENIUS GUN GAP FILLING EXPANDING FOAM • Fills and insulates • Multipurpose • Unique easy control application nozzle

500 ml

$9

99

750 ml

$15

99

ONE HAND OPERATION MAXIMUM CONTROL RE-USABLE FOR UP TO 6 WEEKS Powering True Independents

SMX-20 PLUS • LIGHT BROWN / 600ML • READY TO USE AND FAST CURING • FREE OF SOLVENT, WATER AND ISOCYANATE

SOUDASEAL FR • 600 ML / GREY • INTERNAL AND EXTERNAL USE • MEETS AS1530.4-2014

Powering True Independents

$8

99

$15

99

15019410

FLOOR BOND XMS FLOORING ADHESIVE • Permanently flexible • Non-hazardous – contains no solvents or isocyanates • Excellent non-slump properties • Smooth and easy to trowel

$195 16kg PAIL

15019412

FLOOR BOND XMS FLOORING ADHESIVE - 960g • Permanently flexible • Non-hazardous – contains no solvents or isocyanates • Excellent non-slump properties • Smooth and easy to trowel

Gets The Job Done Powering True Independents

$12

49

DR-ETS2000

DR-SI300

Dripless SI300 Industrial Grade Cradle Gun • Drip /No Drip option • Ergonomic Handle • Ladder Hook Thrust Ratio 14:1

$30

99

Dripless ETS 2000 Heavy Duty Composite ETS Professional Gun • Compact Design • Ladder Hook & Rotating Barrel • Super Sharp Nozzle Thrust Ratio 12:1

$22

99 DR-CH200

DR-SH111

Dripless Heavy Duty 300ml Contractor Grade Skeleton Gun • Ideal for use on high viscosity products • Cut away front for easy loading • Ladder hook & seal punch, Thrust Ratio 12:1

Powering True Independents

$14

99

Dripless Contactor Grade 300ml • Lightweight body • Cut away front for easy loading • Seal punch and super sharp nozzle cutter. Thrust Ratio - 10:1

$9

99

$119 TOOL ONLY

$549 TOOL ONLY

18V Blower - DUB185Z

18Vx2 Brushless Lawn Mower 460mm (18”) - DLM464Z

• I ncreased air volume with 3.2m³/min • 3 stage air volume settings & variable speed trigger for maximum control • Wind speeds of up to 352km/h for higher blowing efficiency

• 18” heavy duty steel deck • 2 tooth bar blade • High power brushless motor provides 3,300rpm

Powering True Independents

3 STAGE AIR SELECTION

60L CATCHER

$119

$549

TOOL ONLY

TOOL ONLY

18V Blower - DUB185Z

18Vx2 Brushless Lawn Mower 460mm (18”) - DLM464Z

• I ncreased air volume with 3.2m³/min • 3 stage air volume settings & variable speed trigger for maximum control • Wind speeds of up to 352km/h for higher blowing efficiency

• 18” heavy duty steel deck • 2 tooth bar blade • High power brushless motor provides 3,300rpm

$279 TOOL ONLY

18V Brushless Line Trimmer - DUR189Z •A djustable telescopic shaft with ergonomic curve • Automatic Torque Drive Technology • No Load Speed of 6,000 rpm

$649 TOOL ONLY

$509 TOOL ONLY

18Vx2 Brushless Chainsaw 400mm (16”) - DUC400Z • I mproved tool-less chain adjustment • Metal Spike providing more control • Chain Speed of 1,200m/min

$349 TOOL ONLY

$149 TOOL ONLY

18V Hedge Trimmer 520mm - DUH523Z • L ightweight •C ontinuous runtime approx. 70 minutes • 15mm maximum cutting diameter

$399 TOOL ONLY

18Vx2 Brushless Multi-Function Power Head, Pole Saw - DUX60ZPS

18V Brushless Chainsaw 250mm (10”) - DUC254Z

18Vx2 Brushless Blower / Vacuum - DUB363ZV

• I ncludes an Extension Pole and Pole Saw Attachment • Powerful Brushless Motor • No Load Speed of 9,700 rpm

•P owerful Brushless Motor • Torque Boost Mode • Chain Speed of 1,440m/min

•C ruise control function • Vacuum mulching function with 50L capacity bag • 13.4m³/min air volume & 3.2kPa max suction

Powering True Independents

$119

$549

TOOL ONLY

TOOL ONLY

18V Blower - DUB185Z

18Vx2 Brushless Lawn Mower 460mm (18”) - DLM464Z

• I ncreased air volume with 3.2m³/min • 3 stage air volume settings & variable speed trigger for maximum control • Wind speeds of up to 352km/h for higher blowing efficiency

• 18” heavy duty steel deck • 2 tooth bar blade • High power brushless motor provides 3,300rpm

$279

$509

TOOL ONLY

TOOL ONLY

18V Brushless Line Trimmer - DUR189Z

18Vx2 Brushless Chainsaw 400mm (16”) - DUC400Z

•A djustable telescopic shaft with ergonomic curve • Automatic Torque Drive Technology • No Load Speed of 6,000 rpm

• I mproved tool-less chain adjustment • Metal Spike providing more control • Chain Speed of 1,200m/min

Powering True Independents

40 VOLT

40V BRUSHLESS 18” STEEL DECK LAWNMOWER (2510107AU) • Brushless motor - drastically reduces vibrations, minimal maintenance • 46cm cutting width - reliable and easy to use and has extra onboard battery storage • Versatile 3-in-1 function for mulching, rear collection & side dishcharge

$629

WITH BATTERY/CHARGER

40V AXIAL BLOWER (2400807AU) • Variable speed trigger - clear gravel pathways to stubborn wet leaves and debris • Features an axial fan to deliver higher wind velocity - 177km/h max. air speed • Lightweight and comfortable to use

$389

WITH BATTERY/ CHARGER

Powering True Independents

40 VOLT

24V AXIAL BLOWER (2402207AU)

40V 13” STRING TRIMMER (2101507AU)

• Variable speed trigger - perfect for leaves and dirt • Axial fan delivers enough power to manage soggy leaves - 160km/h max. air speed • Lightweight and comfortable to use

• Adjustable front handle to fit different user heights and improve comfort • Variable speed trigger for optimised control • Automatic dual line feed system

24 VOLT

40 VOLT

$99

$329

SKIN ONLY RRP

WITH BATTERY/CHARGER

24V 13” LAWNMOWER (2509607AU)

40V BRUSHLESS 18” STEEL DECK LAWNMOWER (2510107AU)

• Compact design for easy manoeuvrability and vertical storage • Hard catcher as well as the ability to mulch • Lightweight and comfortable to use

• Brushless motor - drastically reduces vibrations, minimal maintenance • 46cm cutting width - reliable and easy to use and has extra onboard battery storage • Versatile 3-in-1 function for mulching, rear collection & side discharge

$399

WITH BATTERY/CHARGER

24 VOLT Powering True Independents

$629

WITH BATTERY/CHARGER

40 VOLT

24V AXIAL BLOWER (2402207AU)

24V 22” HEDGE TRIMMER (2200107AU)

24V 10” CHAINSAW (2000007AU)

• Variable speed trigger - perfect for leaves and dirt • Delivers 160km/h max. air speed • Lightweight and comfortable to use

• Polished steel 22” dual action blades • 90° rotating handle • 18mm blade opening

• Two button safety system to avoid accidental start up • Lightweight and easy to use • Low noise levels

24 VOLT

24 VOLT

$99

24 VOLT

$149

SKIN ONLY

$159

SKIN ONLY

SKIN ONLY

24V 12” STRING TRIMMER (2100007AU)

24V 13” LAWNMOWER (2509607AU)

• Automatic dual line feed system • Adjustable front handle for improved comfort • 25cm or 30cm cutting widith

• Compact design for easy manoeuvrability and vertical storage • Hard catcher as well as the ability to mulch • Lightweight and comfortable to use

$399

24 VOLT

WITH BATTERY/CHARGER

$109

24 VOLT

SKIN ONLY

40V BRUSHLESS CHAINSAW (20077AU)

40V 18”BRUSHLESS LAWNMOWER (2510107AU)

40V POLE SAW & HEDGE TRIMMER (1300607AU)

• Low noise • Electric chain brake • Automatic oiling system

• Steel deck • Onboard battery storage • Cut, mulch or side discharge

• Lightweight • 203mm bar length • 520mm blade length

16” BAR

40 VOLT 2-IN ONE

$549

WITH BATTERY/CHARGER Powering True Independents

$629

WITH BATTERY/CHARGER

$599

WITH BATTERY/CHARGER

40V BRUSHLESS 18” STEEL DECK LAWNMOWER (2510107AU) • Brushless motor - drastically reduces vibrations, minimal maintenance • 46cm cutting width - reliable and easy to use and has extra onboard battery storage • Versatile 3-in-1 function for mulching, rear collection & side discharge

$629

WITH BATTERY/CHARGER 40 VOLT

Powering True Independents

LAZER CUT 17” LAWNMOWER (LCS140)

LAZER MULCH 18” LAWNMOWER (LMS140)

• Advanced 140cc 4 stroke engine • 4 blade cutting system • Large capacity nylon covered dust proof catcher

• Advanced 140cc 4 stroke engine • 4 blade cutting system • Mulch or catch with the removable mulching plug

$379

$499

BULL ANT 16” LAWNMOWER (PCS125)

REDBACK 17” LAWNMOWER (RCS140)

POWER MULCH 18” LAWNMOWER (PMS140)

• Advanced 125cc 4 stroke engine • Heavy duty steel chassis • Lightweight and compact making it ideal for small lawns

• 140cc 4 stroke engine • Tomahawk cutting system with large bar blade • Large capacity dust proof catcher

• 140cc 4 stroke engine • 4 blade cutting system • Mulch or catch with the removable mulching plug

$299

$379

$499

BENT SHAFT TRIMMER (BCB265)

STRAIGT SHAFT TRIMMER (BCS265)

OUTDOOR BLOWER (SLB265)

•2 6cc 2 stroke engine, perfect for quick, easy trimming • Split shaft for easy storage • Self-feeding line trimming bump head

•2 6cc 2 stroke engine, use for trimming as well as weeds • Split shaft for easy storage • Self-feeding line trimming bump head

• 26cc 2 stroke engine • Lightweight and compact for easy use • Easy to start

$239 Powering True Independents

$269

$239

BULL ANT 16” LAWNMOWER (PCS125)

BENT SHAFT TRIMMER (BCB265)

• Advanced 125cc 4 stroke engine • Heavy duty steel chassis • Lightweight and compact making it ideal for small lawns

• 26cc 2 stroke engine, perfect for quick and easy line trimming • Split shaft for easy storage • Self-feeding line trimming bump head

* conditions apply

* conditions apply

$299

Powering True Independents

$239

LAZER CUT 17” LAWNMOWER (LCS140)

BULL ANT 16” LAWNMOWER (PCS125) • Advanced 125cc 4 stroke engine • Heavy duty steel chassis • Lightweight and compact making it ideal for small lawns

* conditions apply

• Advanced 140cc 4 stroke engine • 4 blade cutting system • Large capacity nylon covered dust proof catcher

$299

* conditions apply

$379

BENT SHAFT TRIMMER (BCB265)

OUTDOOR BLOWER (SLB265)

• 26cc 2 stroke engine, perfect for quick and easy line trimming • Split shaft for easy storage • Self-feeding line trimming bump head

• 26cc engine, perfect for cleaning driveways, garages, paths and entertaining areas • Lightweight and compact for easy use • Easy to start

* conditions apply

* conditions apply

$239 Powering True Independents

$239

BULL ANT 16” LAWNMOWER (PCS125) • Advanced 125cc 4 stroke engine • Heavy duty steel chassis • Lightweight and compact making it ideal for small lawns

$299

* conditions apply

Powering True Independents

SJ-BFG60

SJ-AFG45

AXE 2KG FIBREGLASS HANDLE • Drop forged carbon steel fully polished head • Hardened & tempered • Quality fibreglass shaft

$59 HOT BUY

EG-7216

BLOCKSPLITTER 2.8KG FIBREGLASS HANDLE • Drop forged carbon steel fully polished head • Hardened & tempered • Quality fibreglass shaft

Powering True Independents

$59

UNBEATABLE

HATCHET 570G STEEL HANDLE • Carbon steel head • Tubular steel handle • Non slip comfort grip

$24

95

GREAT VALUE

SJ-MATTFG

COUNTY FIBREGLASS SHOVELS • 2mm heat treated, high grade carbon steel blade • 2.5mm fibreglass shaft • 500mm steel insert PART #

TYPE

SJ-SHO/60FG

SQUARE

SJ-SHO/75FG

POST HOLE

SJ-SHO/80FG

PLUMBERS

SJ-SHO/90FG

TRENCHING

Powering True Independents

$39

95 EACH

UNBEATABLE

MATTOCK CUTTER END FIBREGLASS HANDLE • Ideal for trenching & cutting through roots & debris • Heavy duty carbon steel head • High quality fibreglass shaft

$49

95

BEST VALUE

6112H

BETTER FLOW CONTROL

12mm HOSE CONNECTOR WITH FLOW CONTROL • Ball valve • Removable and reusable • Tough and durable

$9

99

6500H

DURABLE DESIGN

NOZZLE & HOSE SET • 12mm adjustable nozzle • 20/25mm tap adaptor • 2x 12mm hose connector

Powering True Independents

$17

7444H

1155H

1000kPa BURST PRESSURE DURABLE DESIGN METAL ROTARY SLED SPRINKLER • 4m throw radius • Includes metal base • Resist wind with high speed drops

$1990

1310HF

10M GARDEN HOSE

ONLY

10M MINI PATIO HOSE REEL • Multi function gun included • 12m hose fittings included • Manual rewind

Powering True Independents

$19

99

12MM METAL HOSE CART • Includes hose and fittings • 20m hose length • Durable metal construction

$29

08386000034 / 08386000037

SM-CW Series

® A NORMA Group brand

Clean Water Submersible Pumps • Suitable for clean water • Automatic operation

SM-XW250A Max. Flow 6000L/H SM-XW750A Max. Flow 12500L/H

$82 99 $98

49

08382000311 / 8382000312

® A NORMA Group brand

Pump Suction Kits • All fittings included • Quick and easy installation

PSK1X15 - 1” x 1.5m

$16 79 $24

49

PSK1X30 - 1” x 3.0m

Powering True Independents

WS5001

OUTDOOR

WEATHER VANE

Professional Weather Station • 8 Weather Data Points • Includes Weather Vane • Includes Indoor Display Console

WS5101

$99

WS5061

INCLUDES

DUAL

ALARM

MONITOR LOCALISED

WEATHER

Wireless Weather Alarm • 6 Weather Data Points • Includes Outdoor Sensor • Includes Indoor Display Console

Powering True Independents

$52

Wireless Weather Reader • 4 Weather Data Points • Includes Outdoor Sensor • Includes Indoor Display Console

$47

50

BONUS BEANIE

#1 TRUSTED BRAND

$109

KIEWA GUMBOOT • Anti bacterial technology • SRC slip resistant soles • 40% lighter than rubber & PVC boots

TALON RAT & MICE KILLER

FROM

PER PAIR

SIZES AVAILABLE FROM AU 3.5 - 14

TP150

$749

• Kills rodents in single feed • Clean and easy to use • Available in wax blocks and pellets

NEW PREMIUM WORK GLOVES

RIVERLAND SHOVEL • • • •

• Reinforced palm & impact resistant knuckles • Velcro snug fit wrist • Reflective piping •S uperior durable Microfibre synthetic leather

$22

$69

NEW

99

PAIR

SIZES AVAILABLE

S

M

L

XL

XXL

XXXL

460520 460522 460524 460526 460529 460530

LOW

MULTI CATCH STEEL MOUSE TRAP 26 X 16 X 6CM

24° ANGLE

922138

300210

300140

$26

Powering True Independents

29

AUSSIE MADE

STRONG DESIGN

MAINTENANCE

• Self setting • Two entry points • Catches up to 10 mice at a time

Extra thick fibreglass handle On-handle depth gauge PowerTread for safer foot traction Goose neck for better angle leverage

SURE-CATCH RAT & MOUSE TRAP • No touch disposal • Pesticide -free • Strong design

FROM

$7

KILSOOT CHIMNEY CLEANER • No Smoke • No Danger • No Smell

FROM

305100

$499

EACH

08250302000 (CCA240)

08250302003 (CCA400)

08250300002 (NHC100W1)

W4

W4

$219

$312

W1

$103

NORMACLAMP® Cobra – 240 Piece Grab Kit – Service and Maintenance (W4)

NORMACLAMP® Cobra – 400 Piece Grab Kit – Landscape (W4)

NORMACLAMP® Worm Drive Hose Clamp – 100 Piece Grab Kit (W1)

• 14.5-16mm to 28.5-30mm Ø | incl. tool

• 15.5-17mm to 27.5-29mm Ø | incl. tool

• 9-11mm to 40-60mm Ø | incl. tool

08250300005 (NHC100W3)

08250300058 (NHC100W4)

08250303000 (NFC105W1)

W4

W3

$171

$205

W1

$144

NORMACLAMP® Worm Drive Hose Clamp – 100 Piece Grab Kit (W3)

NORMACLAMP® Worm Drive Hose Clamp – 100 Piece Grab Kit (W4)

NORMACLAMP® Mini Standard – 105 Piece Grab Kit (W1)

• 8-16mm to 40-60mm Ø | incl. tool

• 8-16mm to 40-60mm Ø | incl. tool

• 7-9mm to 15-17mm Ø

08250303001 (NFC105W4)

08220317004 (BHC100W2)

08220317005 (BHC100W4)

Plated/ 300 Series

W4

$144

$117

300 Series SS

$150

NORMACLAMP® Mini Standard – 105 Piece Grab Kit (W4)

BREEZE® Mini and BREEZE® Power Seal® – 100 Piece Grab Kit

BREEZE® Mini and BREEZE® Power Seal®– 100 Piece Grab Kit

• 8.5-9.5mm to 15-17mm Ø

• 5.6-16mm to 33-57mm Ø | incl. tool

• 5.6-16mm to 33-57mm Ø | incl. tool

Powering True Independents

08372513015 (GFBV15)

08372513020 (GFBV20)

15mm

08372513025 (GFBV25)

20mm

25mm

Guyco Female Ball Valve - 15mm

Guyco Female Ball Valve - 20mm

Guyco Female Ball Valve - 25mm

• Full flow to provide minimal head loss • Constructed from corrosion resistant materials • UV stabilised to perform in harsh sunlight conditions

• Full flow to provide minimal head loss • Constructed from corrosion resistant materials • UV stabilised to perform in harsh sunlight conditions

• Full flow to provide minimal head loss • Constructed from corrosion resistant materials • UV stabilised to perform in harsh sunlight conditions

$21

99

$21

99

8373901025 (UFVB)

$27

99

08372514240 (AFV40)

40mm

25mm

Universal Foot Valve Bracket - 25mm

Plastic Spring Loaded Foot Valve - 40mm

• Adjustable height to suit various applications • Compatible with tapping saddles with a 25mm BSP outlet • Includes 2x 6” floats, stainless steel rod and plug • Easy to install

• Filter cage can be removed if a check valve is required • Spring loaded which allows valve to be installed on any angle • Constructed from corrosion resistant materials

$31

99

08372513032 (GFBV32)

08372513040 (GFBV40)

32mm

$39

99

08372513050 (GFBV50)

40mm

50mm

Guyco Female Ball Valve - 32mm

Guyco Female Ball Valve - 40mm

Guyco Female Ball Valve - 50mm

• Full flow to provide minimal head loss • Constructed from corrosion resistant materials • UV stabilised to perform in harsh sunlight conditions

• Full flow to provide minimal head loss • Constructed from corrosion resistant materials • UV stabilised to perform in harsh sunlight conditions

• Full flow to provide minimal head loss • Constructed from corrosion resistant materials • UV stabilised to perform in harsh sunlight conditions

$41

Powering True Independents

99

$50

99

$65

99

08372810000 (20S130)

08372810003 (25S130)

08372810005 (25D130)

25mm SCREEN FILTER

20mm SCREEN FILTER

25mm DISC FILTER

Plastic Screen Filter - 20mm

Plastic Screen Filter - 25mm

Plastic Disc Filter - 25mm

• • • •

• • • •

• 1000 kPa pressure rating • 90cm² filter surface • 80 L/min flow • 130 μm

1000 kPa pressure rating 90cm² filter surface 80 L/min flow 130 μm

$999

1000 kPa pressure rating 90cm² filter surface 80 L/min flow 130 μm

8371712000 (IBC12V)

$2199

8371712002 (MTV2012)

20x 12mm

60x 12mm

IBC Tap Adaptor - 60mm x 12mm • • • •

$999

6mm pitch FI 60mm acme thread 12mm snap on tap connection Integrated shut off valve Glass reinforced polypropylene body

$13

99

08372810006 (40S130)

Drum Tap - 20mm x 12mm Snap Connection • Garden snap on connection for fitting a hose • Integrated shut off valve • Glass reinforced polypropylene

08372810009 (50S130)

40mm SCREEN FILTER

$5

99

8372810011 (50D130)

50mm DISC FILTER

50mm SCREEN FILTER

Plastic Screen Filter - 40mm

Plastic Screen Filter - 50mm

Plastic Disc Filter - 50mm

• 800 kPa pressure rating • 246cm² filter surface • 250 L/min flow • 130 μm

• 800 kPa pressure rating • 246cm² filter surface • 300 L/min flow • 130 μm

• 800 kPa pressure rating • 254cm² filter surface • 300 L/min flow • 130 μm

$75

Powering True Independents

99

$85

99

$104

003020

$11

75

RELN Storm Drain 4-Way Connector • Concave plastic grey grate • Enables easy change of direction in Storm Drain channel • Left or right hand extension also tee and cross configurations • Cross braced ribs are designed in the body for strength and rigidity • Anti-floatation feet to prevent floating when encased in fill material • Interlocking channel system - no need for couplings

Complete Storm Drainage Solutions 003101

1 METRE LENGTH

RELN Storm Drain 1 Metre Channel • Tough, durable & lightweight

$21

49

Powering True Independents

LG40507 LG40506

LG90581 LG90582

PREMIUM ALL PURPOSE FERTILISER - 500g

VEGETABLES & HERBS - 500g

•B oost for your veggie patch, your roses or your fruit trees.

•H igh-quality, natural mineral nutrition for your soil and plants

• Superior natural fertiliser for vegetable and herb gardens •E nvironmentally friendly •N on toxic

$7

$7

29

29

500g

500g

1kg Available $13.95 LG90561 LG90562

1kg Available $13.95 LG90541 LG90542

NATIVE NUTRIENTS - 500g

ROSES & FLOWERS - 500g

•S uperior natural fertiliser for sensitive native plants • Environmentally friendly • Non toxic

•S uperior natural fertiliser for roses and flowers • Environmentally friendly • Non toxic

$729

$729

500g

500g

1kg Available $13.95 LG90521 LG90522

1kg Available $13.95 LG40508

CITRUS & FRUIT TREES - 500g •S uperior all purpose fertiliser for fruiting trees •E nvironmentally friendly •N on toxic

10 PACK

$7

29 500g

1kg Available $13.95 LG40543 LG40544

BIO-ROCK DUST SOIL CONDITIONER- 500g •S uperior natural fertiliser for roses and flowers •E nvironmentally friendly •N on toxic

$7

29 500g

1kg Available $13.95 Advertised offers valid from 15/9/20 until 31/10/20.

Powering True Independents

GROW STARS FERTILISER TABLETS • Superior all purpose slow release fertiliser tablets

$1399

WB500GTC

IDEAL FOR DIY & GARDENERS 75L (5cft) GREEN WHEELBARROW • Standard pneumatic tyre • Metal tray • Ideal for DIY and gardeners

$94

99

Powering True Independents

MM18005NW

WB500GTC

IDEAL FOR DIY & GARDENERS

CONTROL WEEDS

75L (5cft) GREEN WHEELBARROW • Standard Pneumatic Tyre • Metal Tray • Ideal For DIY & Gardeners

$9

99

$94

99

MULCH MAT WEED INHIBITOR 1.8M x 5M • Suppresses Weed Growth • High Water & Air Permeability • Spunbonded Fabric

GSWSS090025

MWFGH25NB

MWFG1000

MESH INFILL GATE

FARM GATE 1000mm (3’3”)

10 STAKES PER PACK

$5999

• 25NB • 1170mm High • 200mm x 100mm x 5mm Mesh Infill

$999

EASY TO INSTALL

FARM GATE HINGE SET

900mm WOOD STAKES

• Includes Top Strap Hinge Assembly - Screw on & Bottom Gudgeon - Screw on

• Hardwood • 25mm x 25mm • Great For Supporting Plants

MORE SIZES IN-STORE

$999

EACH

• Touch Up Paint • Fast Dry, Industrial Strength • Long Term Protection Against Rust & Corrosion

Powering True Independents

PER PACK

TP0604

USGGY

ULTRACOLOR SPRAY GALV 350g

$129

6’ x 4’ BLUE TARPAULIN • 1.2m x 1.8m • General Purpose Use • Reinforced Edges With Eyelets

TPHD1012

10’ x 12’ HEAVY DUTY SILVER/BLACK TARPAULIN

$2

99

• • • •

3m x 3.6m Includes 4 Tie Downs UV Stabilised Strong & Durable

$3499

GSWSS090025

900mm WOODEN GARDEN STAKES • Hardwood • 25mm x 25mm • Great For Supporting Plants

$1

900mm

29

Powering True Independents

PER PACK

10 STAKES PER PACK

WB500GTC

$9499 IDEAL FOR DIY & GARDENERS

75L (5cft) GREEN WHEELBARROW • Standard Pneumatic Tyre • Metal Tray • Ideal For DIY & Gardeners

MM18005NW

CONTROL WEEDS

$9

99

Powering True Independents

MULCH MAT WEED INHIBITOR 1.8M x 5M • Suppresses Weed Growth • High Water & Air Permeability • Spunbonded Fabric

DURACOM GREYSTONE

TM

FACADE SYSTEM

CREATE THAT CONTEMPORARY INDUSTRIAL LOOK WITH DURACOM GREYSTONE™ // Provides a modern industrial look with 2 different shades and 2 different faces. // Lightweight and easy to install using a proven installation method. // Great solution when panels may be difficult to maintain. The factory applied treatment means you do not need to recoat or repaint panels, reducing maintenance costs. // Australian manufactured, tested and warranted. // Panels are non-combustible, which ensures a perfect cladding option for both commercial and residential projects.

All profiles available in // 2400 x 1200 // 3000 x 1200

Duracom GreystoneTM Naturial Industrial

Powering True Independents

Duracom GreystoneTM Naturial Velvet

Duracom GreystoneTM Charcoal Industrial

Duracom GreystoneTM Charcoal Velvet

STYLISH PLANK & BRITSH BRACE BARN DOORS

WHITE OAK PLANK BARN DOOR

WHITE OAK BRITISH BRACE BARN DOOR

• 2150 x 1000 x 35mm

• 2150 x 1000 x 35mm

$700 Powering True Independents

$700

Maximise your living space and modernise your outdoor living area with Custom Glaze™!

Custom Glaze™ has been engineered to withstand long-term outdoor UV exposure.

PRODUCT DESCRIPTION

AVAILABLE COLOURS:

• High UV & Weather Resistance • Easy Installation - D.I.Y. • Flat look with no corrugations • Cost Effective

grey pal

diffused o clear

STANDARD LENGTHS (m): 3.0, 4.0, 5.0, 6.0 THICKNESS: 2mm

ASK US FOR A00 QUOTE!

$00

CALL OUT

Custom Glaze™ Purlin Spacing Custom Glaze™ is designed to be installed on purlins at a maximum of 1500mm centres.

0

150

NOT TO SCALE

Powering True Independents

610m

m

x)

ma

( mm

The Modern Render Look Made Easy

The latest innovation to achieve a modern render look

NEW The EasyTex™ Range Length (mm)

Width (mm)

Thickness (mm)

Product Code

• Ship-lapped joint detail accommodates building movement and darker paint colours

2,440

1,200

8.5

405123

• Ideal cladding choice for non-combustible applications.

3,000

1,200

8.5

405124

• Available in wider and taller panel sizes for minimal joints and maximum coverage.

3,000

1,350

8.5

405121

3,600

1,200

8.5

405125

• Pre-primed, embedded texture - simply fix and paint.

• Slim wall footprint maximises internal living space For further information visit jameshardie.com.au or phone 13 11 03

Powering True True Powering Independents Independents

THE NEW SYSTEM

NEW

A winning combination of durability and enduring style • Built to last, come rain or shine • Safe near BBQs, firepits and in bushfire zones • Smooth and solid underfoot • A spa and poolside performer* • Now also suitable for urban low set decks* Discover more at hardiedeck.com.au *When installed in strict compliance with the James Hardie ® literature relevant at the time of installation including but not limited to all relevant ground clearance, cross-flow ventilation and sealing requirements, and subject to product suitability.

Powering Powering True True Independents

HardieDeck™ Decking Description

Length

Width

Thickness

Product Code

HardieDeck™ Standard

3,000mm

196mm

19mm

404780

HardieDeck™ Edging Board

3,000mm

196mm

19mm

404781

HardieDeck™ Finishing Board

3,000mm

296mm

19mm

404782

MONTAGE

TM

PRE-FINISHED FACADES

MONTAGE™ IS A VERSATILE FIBRE CEMENT FACADE SYSTEM THAT CAN BE USED BOTH EXTERNALLY & INTERNALLY // 4 finishes available - Concrete, Slimline Tile, Stackstone and Woodgrain. // Lightweight and easy to install. // Pre-finished using a multiple coat finishing system. // Fully sealed panels that are weather resistant and won’t rot or burn. // Perfect for internal or external installation.

Installed using a range of accessories including matching pre-formed corners, starter strips, top hats and clips that are designed as a complete installation system.

MontageTM Concrete

Powering True Independents

MontageTM Slimline Tile

MontageTM Stackstone

MontageTM Woodgrain

SHARPLINE®

ARCHITECTURAL CLADDING

Unleash your creativity and let texture take centre stage As an innovative standing seam profile and part of the Stramit Architectural Range, SharpLine® cladding will give you a beautifully textured finish and contemporary styling for years to come.

A visually striking profile with tall, sharp ribs and flat pans.

•

Choose from 25mm and 38mm ribs to change shadow and visual line depths.

SharpLine® cladding is a modern, versatile solution which integrates seamlessly with other building materials. Create texture using shadow and light, by playing with a wide variety of cover widths and differing rib heights. Choose to use it either as wall cladding or a roofing profile.

•

Available in a range of cover widths from 265mm to 520mm*, using either direct or clip fix fastening systems.

•

Create texture with different tray widths, plus vertical, horizontal and diagonal lines.

•

Play with our 8 different tray widths.

For more information or to view our product range visit stramit.com.au * Cover width will depend on rib height and fixing style. © Stramit Corporation Pty Limited. ® Trademarks of Stramit Corporation Pty Limited ABN 57 005 010 195. Trading as Stramit Building Products.

A member of the Fletcher Building Group.

Powering True Independents

EXPRESS YOURSELF WITH UNICOTE® LUX

Achieve the design you’re looking for with the world-first UniCote® LUX system.

Draw the eye and create a feature by combining Stramit® roofing and walling products in a range of selected UniCote® Lux finishes.

This highly durable paint system results in a UV durable paint finish, perfect for Australia’s climate.

Create a stunning focal point using UniCote® LUX in Weathered Iron, Zinc Graphite, Spectrum, Pentagon, Silver Quartz and Ashwood plus an extended range of finish options.

Use the right canvas Combine the beauty of UniCote® Lux with selected profiles from Stramit’s Architectural Range – SharpLine® architectural cladding, Premier 300™ cladding or C-Clad 280®cladding.

Get the best of both worlds – design and performance Designed and tested to be fully compliant with Australian Standards and all relevant building codes.

For more information or to view our product range visit stramit.com.au

© 2020 Stramit Corporation Pty Limited ABN 57 005 010 195. A member of the Fletcher Building Group. Use of ™ and ® indicates trade marks of Stramit Corporation Pty Limited. Unicote® is a registered trademark of Colossal Management Pty Ltd.

Powering True Independents

WE DO IT BETTER!

EVEREST SQUARE DOUBLE CYLINDER DEADBOLT

• Code: WQL100BLK • 70mm • Rosette Matte Black

$55

• Code: WDB75BLK • Rosette Matte Black

GATE SPRING

$25

SAFETY HASP/STAPLE

EVEREST SQUARE ENTRANCE LEVER • Code: WQL400BLK • 70mm • Rosette Matte Black

GATE SPRING

49

• Code: BWL360CSGV • 360mm • Galvanised

• Code: BWHASP115GV • 115mm • Galvanised

EVEREST SQUARE DUMMY LEVER

$649

• Code: BWL300CSBL • 300mm • Black

SAFETY HASP/STAPLE • Code: BWHASP150ZP • 150mm • Zinc Plated

$33

$75

$16

79

$749

EVEREST SQUARE PASSAGE LEVER • Code: WQL200BLK • 70mm • Rosette Matte Black

EVEREST SQUARE PRIVACY LEVER • Code: WQL300BLK • 70mm • Rosette Matte Black

SAFETY HASP/STAPLE • Code: BWHASP90SS • 90mm • Stainless Steel

GATE LATCH IMPROVED • Code: BWIMDLATCHSS • Stainless Steel

$58

$69

$2129

$1749

GATE LATCH D TYPE DUAL • Code: BWDLHLATCHSS • Stainless Steel

$37 Powering True Independents

99

PADBOLT • Code: BWLPB100SESS • 8.7 x 100mm • Satin Stainless Steel

$20

T HINGE LIGHT DUTY

49

• Code: BTLD300ZP • 300mm • Zinc Plated

$2079

PR-BP004 PR-BP015

Protite Bitumen Membrane • General multi-purpose waterproofing • Suitable for internal & external use • Dries to form a black, glossy flexible & firm membrane.

4 Litre

4 Litre

$49 15 Litre

$115

15 Litre

PR-UT004 PR-UT015ww

Protite Under Tile Membrane

4 Litre

• Polyurethane waterproofing membrane • Use for Laundries, decks, balconies and general wet areas • Use prior to installing mortar beds, render or tiling.

4 Litre

$75 15 Litre

Powering True Independents

15 Litre

$189

ACC MUSBWW

ACC MUSBCB

TM

DUAL USB CAR CHARGER •C harge on the go - ideal for tablets and mobile phones with high capacity batteries

$19

99

ACC MUSBMCAB

TM

DUAL USB WALL CHARGER • Charge two devices at once • Ideal for tablets and mobile phones with high capacity batteries

ACC MTCCAB

$19

99

ACC MUSBLCAB TM

TM

TM

MICRO-USB SYNCHARGE CABLE (90cm)

TYPE-C SYNCHARGE CABLE (90cm)

LIGHTNING SYNCHARGE CABLE (90cm)

• Perfect for car and home use • Standard USB can plug direct into your PC for charge and sync or to power adaptors for recharging only

• Standard USB can plug direct into your PC • Type-C Cables are suitable for charging all devices with a Type-C USB connection

• Standard USB can plug direct into your PC • Lightning Cables are suitable for charging all Lightning iDevices

$9

99

Powering True Independents

$19

99

$24

99

Powering True Independents

LEDTWINSUB

LEDTWIN-R

LEDTWIN-S

16 LED 12V RECTANGLE TRAILER LAMP KIT

$53

99

16 LED 12V SQUARE TRAILER LAMP KIT

$53

99

40 LED SUBMERSIBLE TRAILER LAMP KIT

$149

Trailer & Towing Essentials!

T50LS

HEAVY DUTY 50MM TOWBALLS • 3500KG Rated • Available in black or chrome

HEAVY DUTY 50MM TOWBALL WITH 62MM SHANK

T50S T50SC

$17

99 EACH

$19

99

trailer coupling not included

4 LED LICENSE PLATE LAMP • 12/24V • E ADVR Approved

$17

99

TRAILER COUPLING LOCK • Works attached and unattached • Includes padlock and keys

TLOCK3

$5489 LNC1/ LNM1

RDS8

RBOWS11

D SHACKLES • Available in 8mm, 10mm, 11mm, 13mm and 16mm

FROM

$4

Powering True Independents

99

EACH

FROM BOW SHACKLES • Available in 11mm, 13mm and 16mm

$6

99

EACH

CLOSE-KNIT & MESHBLOCK TRAILER NETS • Assorted sizes available from 1250x1850mm to 2000x2500mm

FROM

$3589

EACH

TP0604

6’ x 4’ BLUE TARPAULIN • 1.2m x 1.8m • General Purpose Use • Reinforced Edges With Eyelets

$2

99 MORE SIZES IN-STORE

Powering True Independents

TPHD1012

$34

99

10’ x 12’ HEAVY DUTY SILVER/BLACK TARPAULIN • • • •

3m x 3.6m Includes 4 Tie Downs UV Stabilised Strong & Durable

Powering True Independents

TPHD1012

10’ x 12’ HEAVY DUTY SILVER/BLACK TARPAULIN • • • •

MORE SIZES IN-STORE

TP0604

6’ x 4’ BLUE TARPAULIN • 1.2m x 1.8m • General Purpose Use • Reinforced Edges With Eyelets

Powering True Independents

$2

99

3m x 3.6m Includes 4 Tie Downs UV Stabilised Strong & Durable

$34

99

MWFG1000

$59

99

FARM GATE 1000mm (3’3”) • 25NB • 1170mm High • 200mm x 100mm x 5mm Mesh Infill

MESH INFILL GATE

MWFGH25NB

EASY TO INSTALL

$9

99

FARM GATE HINGE SET

• Includes Top Strap Hinge Assembly - Screw on & Bottom Gudgeon - Screw on

Powering True Independents

$59

99

MWFG1000

FARM GATE 1000mm (3’3”) • 25NB • 1170mm High • 200mm x 100mm x 5mm Mesh Infill

MESH INFILL GATE

USGGY

RUST & CORROSION PROTECTION TOUCH UP PAINT

ULTRACOLOR SPRAY GALV - 350g • Touch-up paint • Fast dry • Industrial strength • Long term protection against rust & corrosion

$9

99

EACH

Powering True Independents

TP0604

MORE SIZES IN-STORE

TPHD1012

6’ x 4’ BLUE TARPAULIN • 1.2m x 1.8m • General Purpose Use • Reinforced Edges With Eyelets

10’ x 12’ HEAVY DUTY SILVER/BLACK TARPAULIN

$2

99

• • • •

3m x 3.6m Includes 4 Tie Downs UV Stabilised Strong & Durable

$34

99

WB500GTC

MM18005NW

$94

99

IDEAL FOR DIY & GARDENERS

75L (5cft) GREEN WHEELBARROW • Standard Pneumatic Tyre • Metal Tray • Ideal For DIY & Gardeners

Powering True Independents

$9

99

CONTROL WEEDS

MULCH MAT WEED INHIBITOR 1.8M x 5M • Suppresses Weed Growth • High Water & Air Permeability • Spunbonded Fabric

MWFG1000

MWFGH25NB

EASY TO INSTALL

MESH INFILL GATE

$9

99

FARM GATE 1000mm (3’3”)

$5999

• 25NB • 1170mm High • 200mm x 100mm x 5mm Mesh Infill

FARM GATE HINGE SET • Includes Top Strap Hinge Assembly - Screw on & Bottom Gudgeon - Screw on WB500GTC

USGGY

$94

99

ULTRACOLOR SPRAY GALV 350g

$9

99

EACH • Touch Up Paint • Fast Dry, Industrial Strength • Long Term Protection Against Rust & Corrosion

Powering True Independents

IDEAL FOR DIY & GARDENERS

75L (5cft) GREEN WHEELBARROW • Standard Pneumatic Tyre • Metal Tray • Ideal For DIY & Gardeners

TP0604

MORE SIZES IN-STORE

TPHD1012

10’ x 12’ HEAVY DUTY SILVER/BLACK TARPAULIN

6’ x 4’ BLUE TARPAULIN • 1.2m x 1.8m • General Purpose Use • Reinforced Edges With Eyelets

$2

99

• • • •

3m x 3.6m Includes 4 Tie Downs UV Stabilised Strong & Durable

$34

99

10 STAKES PER PACK MM18005NW GSWSS090025

$9

99

CONTROL WEEDS

MULCH MAT WEED INHIBITOR 1.8M x 5M • Suppresses Weed Growth • High Water & Air Permeability • Spunbonded Fabric

Powering True Independents

900mm WOOD STAKES • Hardwood • 25mm x 25mm • Great For Supporting Plants

$1

29

PER PACK

MWFG1000

MESH INFILL GATE

FARM GATE 1000mm (3’3”) • 25NB • 1170mm High • 200mm x 100mm x 5mm Mesh Infill

$59

99

Powering True Independents

025298

RELN MULTI-TROUGH • Suitable for feed or water for most penned livestock • Tough & durable. Will not rust, crack, or peel • Non-toxic, food-compatible, UV-stabilised polyethelene • Weather resistant • Water Trough supplied with 15mm Float Valve, Reln Flat Float Valve Cover, brass outlet, and 20mm drain plug • Includes supporting brackets for mounting on metal or wood rails

$163

025350

RELN HAY RACK C/W BRACKETS • For feeding baled hay and mixed seed to a variety of livestock • Tough & durable. Will not rust, crack, or peel • Non-toxic, food-compatible, UV-stabilised polyethelene • Weather resistant • Supplied with galvanised rack and mounting brackets • Can be permanently mounted or hung on metal or wood rails

Powering True Independents

$242

®

®

BY

New 2021 Multi-Prop Range & Accessories • Up to 300kg/ 1000lb • Tilting non slip pads • Exclusive design • World First Patented adjusting and locking systems • Quick set up • Easy, Fast and Accurate • 1mm thick steel tubes • Threaded shaft for accurate adjustment • Multi-disc system for quick expansion

GORILLA MULTI-PROP ACCESSORY PAD GOR-MP-PD35

GORILLA MULTI-PROP ACCESSORY ARM

$29

GOR-MP-ARM

$49

GORILLA MULTI-PROP

BY PIHER - 40CM-60CM

GORILLA MULTI-PROP

BY PIHER - 60CM-100CM

GORILLA MULTI-PROP

BY PIHER - 95cm-170cm

GORILLA MULTI-PROP

BY PIHER - 155cm-290cm

GOR-MP-040

GOR-MP-060

GOR-MP-095

GOR-MP-155

$74 Powering True Independents

$79

$89

$99

HEAD GLOVE E

WINTER WARMERS HEAD SCARF E

AERIAL ESSENTIALS WINTER GLOVES • Available in assorted colours

$9

95 PAIR

FAE-SLIPPERS

AERIAL ESSENTIALS WINTER SCARF • Available in assorted colours

AERIAL ESSENTIALS SLIPPERS • Available in assorted designs

$9

95

$9

95

EACH HEAD BEAN E

PAIR

FAE-SOCKS

MIA COMFY SOCKS • Available in assorted colours

Powering True Independents

$12

95 PAIR

AERIAL ESSENTIALS WINTER BEANIES • Available in assorted designs

$9

95

EACH

86000-60DIG

Hospital Grade Disinfectant

16235-125DIG 16235-0DIG

Contains No Harsh Chemicals ISOPROPYL ALCOHOL • Easy to use spray pack •A highly effective ‘hard surface’ sanitiser eeps your home and office 99.9% •K free of germs •G reat for Computer screens and equipment, Keyboards and Sanitising hard surfaces

VIRO SURFACE CLEANER - 500ML •3 In 1 – Cleans, Sanitises and Disinfects • Effective 99.99% of Germs • KILLS COVID-19 INSIDE 5 MINUTES* • Suitable for use in food areas, no rinsing required

$1499 125ml

$14

$2999

99

* TGA Registration: 343510

500ml

15007-0DIG 15009-0DIG

15000-1DIG 15000-4DIG 15000-20DIGN

Available in naturally scented Lavender or Vanilla

METHYLATED SPIRITS •H ighly cost-effective cleaner/ non-smearing • Miscible in water and hydrocarbon solvents • Burns clean, leaving very little fumes or black marks • Alcohol smell is burnt off in heating

$550

MULTI-PURPOSE SURFACE CLEANER - 500ML •M ade from a natural & renewable resource • Available in two scents – lavender and vanilla • Ready-to-use formula • Highly cost-effective cleaner/ non-smearing

$5

50

Powering True Independents

EACH

1 Litre

$1895 4 Litre

Please note: Not suitable for use in decorative spirit burners.

ALSO AVAILABLE IN 20 LITRE - $99

ALCOHOL HAND SANITISER • Gental to the skin • F ragrance Free

$6

95

HAND CLEANERS

500ml

Extra Heavy Duty Hand Cleaner

Contains over 70% alcohol

IHPG500

PROTECTA GRIT HAND CLEANER •C ontains grit for added scrub effect • Contains lanolin, Aloe Vera and Vitamin E • Handy squeeze bottle

$9

95

ISHS500

500ml

IHPP500D

Paint and Resin Remover

Heavy Duty Hand Cleaner

PROTECTA PINK HAND CLEANER

ELIMINATOR HAND CLEANER

• Industrial strength • Contains added moisturiser • Handy pump pack

• Removes adhesive and sealants • Fast cleaning action • Contains moisturiser

$9

95

Powering True Independents

IHPE500

500ml

$14

95

500ml

THGFCX50

50ml

HAND SANITISER GEL • 50ml flip cap • Alcohol >60% extra strength • Kills 99.9% germs

$4

99

THGPX500

EXTRA STRENGTH THMSX100

500ml pump

100ml spray

HAND SANITISER MIST SPRAY • 100ml • Alcohol >60% extra strength • Kills 99.9% germs

$999

EXTRA STRENGTH THMSX125

125ml spray

HAND SANITISER MIST SPRAY • 125ml • Alcohol >60% extra strength • Kills 99.9% germs

$11

99

EXTRA STRENGTH

Powering True Independents

HAND SANITISER GEL PUMP • 500ml • Alcohol >60% extra strength • Kills 99.9% germs

$19

99

EXTRA STRENGTH

TWO HANDS HAND SANITISER GEL 1 LITRE REFILL - $30 THGPXR

The next generation

60 years of

European technology

• Made in Italy • Leading 4 Year Warranty* • Satisfaction Money-Back Guarantee**

in every machine

Look for *Standard warranty 2 years, with 2 year extension if registered online. **Return your machine within 30 days of purchase for a full refund.

Applies to Italian-made models only.

Terms and conditions apply, see Weldclass.com.au/mbg

SAVE

$120

WELDFORCE 155M MIG GAS/GASLESS WELDER WC-155M

WELDFORCE 250MST MIG/STICK/TIG WELDER WC-250MST

CUTFORCE 43P PLASMA CUTTER WC-43P

• • • • •

• • • • •

250A max output Synergic* or manual MIG function 12mm steel max MIG capacity 28 Pre-set programs Digital interactive display

• 40A max output • Clean cut up to 16mm steel • Cuts all metals Steel, SS, Alu, Gal, Copper, Bras • 7kg - Compact, robust and lightweight

$2950

$1899

150A max output Easy-To-Use Synergic* MIG Function Inductance control Generator friendly Takes 1kg or 5kg spools

$999 SAVE

SAVE

$149

$159

Australia’s No. 1 gasless wire !

PLATINUM GL-11 GASLESS WIRE 0.9mm 4.5KG 2-098FM

WELDFORCE 180MST WELDER BUNDLE WF-180MSTK3

$859 Powering True Independents

WELDFORCE 200MST WELDER BUNDLE WF-200MSTK3

$1099

• Ultra-Smoth arc with minimal spatter • Suitable for All-positional, single and multi-pass welds • Vacuum Foil-Sealed spool, for exceptional storage life

$95

WELDFORCE 160MST WELDER BUNDLE WF-160MSTK3

$629 Upgrade to a larger view !

PROMAX 350 ‘BLUE’ WC-05313 • Shade 9-13, sensitivity & delay adjustment • 100 x 53mm viewing area with Ultra-Clear optics • Grind Mode • 4 sensors • Magnification lens holder • High impact rated to AS/NZS 1337.1

$149