There is an old adage which says that “Prevention is better than cure”. The proverb couldn’t be more appropriatefor LVT flooring. Many of you may wonder about the analogy between the two. This inference is made vis-à-vis preventing damage to luxury vinyl tiles, which incidentally is also one of the ways to prolong its finish.
• Some of the ways to keep LVT vinyl flooring healthy are -
• Make sure your movable furniture is cushioned with rubber or soft plastic caps. These protectorswill prevent scratcheswhen moved to and fro.
• If installationof caps is not possible, a non-slip mat can be placed below the furniture.
• Here is a pro tip. Set up door mats at every entry, especially in areas that boast LVT flooring. This will prevent dirt and debris from seeping inside, and causing irreversible scuffs or sharp grazes on the flooring.
• Do not drag or push heavy furniture across LVT vinyl flooring as this can inflict deep scrapes which in most cases are difficult to fix.
• Disallow indoor games ( virtual and real ) which typically result in high abrasion.
• If LVT is installed in high human traffic sections, it is a good idea to clean the debris on daily basis. This can be achieved by using a soft broom or vacuum. Avoid brooms that are made from thick, sharp, plastic bristles. Instead, use synthetic fibre based broom stick.
• Mopping is yet another ritual which depends on human related activities, especially kids who tend to spill, drop food items. In such a scenario cleaning the floor regularly with soft moist cloth /microfiber mop pad is important.
• Do not use steam mops to clean the floor as it could damage its glossy outer layer.
• Do not use acidic cleaners while mopping as it can lead to scars.
• Do not use mops soaked in high temperature water / detergent solution.
• Do not use unverified detergents.
• What you should instead -
• Use warm water and neutral pH solvent to clean the best LVT flooring.
• The mop should be moist and not soaked.
• Dry the surface after mopping to avoid formation of water marks.
• Use wax-free floor polish or brands which clearly state that the same can be used for LVT vinyl flooring. Using untestedand cheap polish, wax-based or otherwise can make the floor look uneven in terms of finish. Here are some of the essential steps.
• Apply 2 to 3 coats.
• Make sure you let the flooring dry completely after each coat.
• Excess polish can only damage the flooring, so be conservative.
Preventing dirt and debris from entering the house through strategic placement of mats and arming the furniture legs with soft rubber caps is half the battle won. Nonetheless, as a property owner with LVT flooring, make sure you do not use strong detergents or mops dipped in hot water. Following the above guidelines can enhance the life of LVT dramatically.
