1 minute read
6. Understanding the Design Controls for Allotments Standard Allotments (Type A
Next Article
6. UNDERSTANDING THE DESIGN CONTROLS FOR ALLOTMENTS
Requirement STANDARD ALLOTMENTS (TYPE A)
Front Setback
Side Setback
3m Verandah, 5m Dwelling (unless otherwise noted on Building Envelope plan) Garages – 0-200mm or 1.5m
Single Storey Double Storey
1.5m
2.5m
Corner Allotments Single Storey Double Storey
2m Min setback from side street 3m Min setback from side street
Rear Setback
Garage
Site Coverage
POS
Minimum 2.5m – Lots Less than or equal to 35m Minimum 5m – Lots Greater than 35m 960mm minimum from main building line Garages are permitted to have a zero setback for designed without eaves, or where it aligns exactly with the adjoining allotment garage. Maximum length on boundary 10m Maximum height on boundary 3.6m Single width garage on lots less than 13m in width Double (or larger) width garage on lots 13m in width or greater to be no more than 40% of lot width. 60% Maximum Allotments greater than 900m2 – not less than 25% If Primary Living areas upstairs, a deck, terrace or Balcony of not less than 10m2
Wall Heights
Maximum 2 storeys Wall heights to comply with ResCode requirements Dwelling height Maximum 10m Design Controls Classic or Premium Controls apply Allotment Type Allotment Type Controls apply