1 minute read

Dual Frontage Allotments (Type C

Requirement DUAL FRONTAGE ALLOTMENTS (TYPE C)

Front Setback

Advertisement

Side Setback

3m Verandah, 5m Dwelling, 10m maximum (unless otherwise noted on Building Envelope plan) Garages – 0-200mm or 1.5m

Single Storey

1.5m

Double Storey

2.5m

Corner Allotments Single Storey Double Storey

2m Min setback from side street 3m Min setback from side street

Rear Setback Garage

Site Coverage

POS

As per Building Envelope Plan 960mm minimum from main building line Garages with a zero-side setback may be designed without eaves, or where it aligns exactly with the adjoining allotment garage. Maximum length on boundary 10m Maximum height on boundary 3.6m 60% Maximum Allotments greater than 900m2 – not less than 25% If Primary Living areas upstairs, a deck, terrace or Balcony of not less than 10m2

Wall Heights

Maximum 2 storeys Wall heights to comply with ResCode requirements Dwelling height Maximum 10m Design Controls Classic or Premium Controls apply Allotment Type Allotment Type Controls apply

Note: Eaves/sunshades, retractable awnings or other projections not substantially enclosed at the sides are permitted to encroach into setbacks no more than 1.2m.