Expertise at Your Fingertips
RelianceU is the leading platform for orthodontic bonding training and education. From proven protocols to staff onboarding, our resources are built to improve clinical outcomes.
Instructional Videos for Product Application
Clinical Guidance and Bonding Techniques
Exclusive Educational Lecture Series
Scientific Studies and Publications
Resources to Support Team Training
Scan the QR Code to explore our growing library of orthodontic educational tools on RelianceU.
Stay connected for more clinical tips and product insights:
@relianceorthodontics
/RelianceOrthodontics
/reliance-orthodontic-products
About Reliance Orthodontic Products
Founded in 1981 by Paul and Sharon Gange, Reliance Orthodontic Products® has grown from a family start-up into a global leader in orthodontic bonding solutions. Today, secondgeneration leadership continues that legacy, combining decades of expertise, innovation, and integrity in every product we make.
For over 45 years, Reliance has been the trusted name in orthodontic adhesives, field-tested, clinically proven, and made with care for both practitioners and patients.
Our mission remains simple: deliver reliable, cost-effective bonding products that stand the test of treatment time.
Proudly manufactured in the USA and distributed through nearly 200 distributors in 88 countries across six continents, Reliance products are found chairside in orthodontic offices around the world.
Wherever you practice, you can Bond with Reliance — anywhere and everywhere.
From our family to yours, thank you for 45 years of trust, innovation, and bonding success.
The Evolution of Orthodontic Bonding Resins
One Bottle, Every Surface
Enhances bond strength on all surfaces
Tolerates moisture contamination
Primes and conditions any tooth surface for bonding
Effective on any enamel type
Effective on any artificial substrate
Eliminates hydrofluoric acid with porcelain crowns
Will Bond To All Intraoral Surfaces
Patented catalyst allows a minimum of 2 year decalcification prevention from initial application
Applied as a primer under the bracket or around an existing bonded bracket
One-time orthodontic treatment protection
Protection supported by over 15 independent university studies
Smooth, hard finish — no oxygen-inhibited layer
Product Insights
Appliance Removal: Excessive Plaque
Post Polishing: Pristine Enamel
Light Cure Bracket Adhesives
Crystal-clear universal shade matching - Does not stain A leading packable material for attachments
APPLICATIONS
• Bracket and tube bonding
• Aligner attachment material –viscous enough for pre-loading trays
• Fixed lingual retainer bonding
• Compatible with ReliaMold systems
• Suitable for all metal, ceramic, and composite attachments
Cures strong and smooth with modest pliability
Will not wear opposing tooth structure
Soft-cure resin matrix enhances patient comfort
Needle tip dispensing for accurate, ergonomic placement
Light cure acrylic replaces traditional cold cure acrylic
Light Bond™
TIME TESTED PERFORMANCE
y Unrivaled bond strength
y Highly filled paste
y Smooth tacky viscosity
y Consistent successful bonds
CLINICAL APPLICATIONS
y Routine bracket and tube bonding
y Intraoral bonding of metal, ceramic or composite attachments
y Easy flash and debonding cleanup
y Designed for Doctor or staff bracket placement without drift
* Most Popular Choice
PRIMER WITH
BOND™ ADHESIVE Assure® Plus (Appears on Page 5)
* Light Bond™ Sealant appears on Page 30 Etchants and Conditioners appear on Page 29
* Bonding Accessories appear on Page 43
y Indirect bonding to stone/resin models
y Bonds chemically to metal bases y Paste fluoresces under black light for flash and debonding cleanup
CLINICAL APPLICATIONS
y Metal bracket and tube bonds
y Indicated for fine grade
* All syringe applicators contain 5g of paste with Fluoride
* Auxiliary Bonding Supplies appear on Page 16
Chemical Cure Adhesives
Phase II ®
MIX PASTE BRACKET ADHESIVE – CHEMICAL CURE
TIME TESTED CONSISTENCY
y Microfilled paste
- Unrivaled strength
- Smooth, tacky viscosity
- No bracket drift
y Self curing - Full polymerization - A&B mix system - 2.5 minute working time
y Easy removal and cleanup
y Contains Fluoride
CLINICAL APPLICATIONS
y Routine clinical bonding
y Bracket and tube bonding
AVAILBALE IN DUAL CURE
y Initial light cure option
- 10 second exposure tacks bracket in position
- Allows quick and accurate positioning
y Chemical cure time activated - 4 minute working time - Total polymerization under bases
y Contains Fluoride
ORDER INFORMATION
PASTE COMPONENTS
Paste A 6g Syringe #1PSAF
Paste B 6g Syringe #1PSB
Paste A 18g Jar #PJAF
Paste B 18g Jar #PJB
Dual Cure Paste A 6g Syringe #1DCSAF
RECOMMENDED PRIMER WITH PHASE II ® ADHESIVE Assure® Plus (Appears on Page 5)
* Etchants & conditioners appear on Page 29
* Bonding accessories appear on Page 43
* Auxiliary Bonding Supplies appear on Page 16
CHEMICAL CURE SPECIALTY ADHESIVE
TIME TESTED PERFORMANCE
y Unsurpassed bond strength
y Thin, creamy consistency
CLINICAL APPLICATIONS
y Indirect bonding adhesive
y Bonded acrylic appliances
y 3 minute working time
y Contains Fluoride
1 STEP / CONTACT ADHESIVE
y 25 second working time
y Chemical cure - no light required
y Saves time and material
- No Mixing
- Minimizes adhesive per bond
y Highly filled paste
- Increased bond strength - Tacky viscosity
- Prevents bracket drift
Specialty Procedures
ReliaWax®
Mucosal irritant relief
Controlled application - flowable viscosity
Replaces traditional patient wax
Cures to a malleable polymer consistency
Remains in place between appointments
Product Insights
Patient Wax vs. ReliaWax Comparison Chart
Specialty Procedures
Revolutionary impacted tooth extrusion system
Malleable, translucent mold adapts to any tooth structure
Eliminates traditional metal base delivery
Low-profile and smooth edges - minimizes patient discomfort
No need to pinch traditional metal bracket to remove - simply grind off composite with a bur
mold with flowable composite
EASY-T0-USE PRECISION MOLDS FILL MOLD WITH COMPOSITE
BITE RAMP
Bite opening turbo formed on the lingual of upper incisors.
2 sizes—3.0 mm or 5.0 mm.
Bite Ramp 3mm #RMBR3
Bite Ramp 5mm #RMBR5
CUSPID RAMP
Bite opening ramp applied to the cuspid—5.0 mm.
Cuspid Ramp #RMC
BUTTON
Low profile and smooth. Facilitates elastomeric or ligature engagement.
Button #RMBU
MOLAR TUBE
Molds a temporary tube. Accepts wire up to 020.
Molar Tube #RMT
MOLAR PAD
Open the bite with posterior occlusal buildups. TKO or Ultra Band Lok recommended.
Inhibits thumbsucking and tongue thrust tendencies.
WIRE HOLDER
Bonds lingual retainers or other wires consistently with a smooth and low profile finish. 2 sizes—3.0 mm or 4.5 mm.
Aligner Solutions Aligner Solutions
Secure aesthetic bonds to any clear aligner material
No primers, conditioners, or surface prep needed
Clear light-cure paste for clean, invisible results
Low modulus of elasticity flexes with trays
Bonds ceramic, metal, or plastic attachments
y
y
Putty-like
Aligner Solutions
Fully seats aligners for improved treatment
Classic cylindrical rolls or versatile Y-shaped designs
Food grade elastomer material
Applies uniform force to properly seat aligners
Patient controlled forces - bite and seat
Eliminates "halo” air bubbles in sockets
Reduces overall treatment time
Effective and comfortable removal of all aligner brands
Protects soft tissue and gums with specially-designed hook
Non-slip ring handle is ondulated to provide a perfect and easy grip
Fits inside most aligner cases
Tamper-free packaging
BPA-Free & Phthalate-Free
Non-Slip Ring Strong, Sturdy, Perfectly-Sized, Long-Lasting
Resin-based
Ideal
Product Insights
Revolutionary Glass Ionomer Band Cement
Adheres
Secure
Bonds
High compressive & tensile strength Contains fluoride – protects enamel
Industry Leader in Band Cement
•
• Nylon Mixing Spatulas
• Measuring Scoop
• 15cc Liquid
• Disposable Mixing
Band-Lok® Band/Appliance Cements
Bonds chemically to metal
Secure band cementation
Easy, clean removal
Self mix
Tips mix and dispense paste
Proportional paste mix
Eliminates spatulating y Dual cure - light and/or chemical
Crown-Lok™
Tooth Preparation
ReliaBox ®
PRE-PASTED BRACKET STORAGE
Organize and improve bonding efficiencies
Reduce chair time by a minimum of 15 minutes at bracket placement
Light Impervious & Air Tight design - store pre-pasted brackets up to 7 days
Improve contamination control
Etchmaster ®
Smart & Systematic Design
y Reverse bracket holders for each tooth
y Organized by tooth and quadrant
Protects Against Ambient Air & Light
y Custom, secure locking seal
y Adhesive protected up to 7 days
See it in action here!
Accessible & Versatile
Pre-pasted brackets stored on a removable
Designed for use with Reliance or any bracket holders
Efficient & Effective Chairside
Saves at least 15 minutes chairside
Promotes saliva contamination control
MICROETCHING MADE CLEAN AND EFFICIENT
y Precise surface microetching
- Increases surface retention
- Insures properly prepped surface
- Maximizes bond strength on all surfaces
y 4 hole handpiece
- Standard airline attachment
- Easy chairside engagement
- Stainless steel construction
CLINICAL APPLICATIONS
y Lingual bonding
y Artificial substrate bonding
y Molar prep for bonds or bands
y Pre-loaded cartridge tips
- Disposable, no-mess application - No aluminum oxide management
50 micron aluminum oxide
• 2 tip sizes
Small (6 teeth) - Large (18 teeth)
* Etchmaster Handpiece Starter kit includes - 4 Hole Handpiece Attachment
(5)
(5)
* Recommended for removing composite from bracket bases and microetching stainless steel appliances. Not recommended for use on enamel.
Tooth Preparation
Combines etch and primer in a single liquid application
No mixing required — fast, consistent prep
Reduces chairtime with easy scrub + air-dry technique
Compatible with all enamel surfaces
THE FIRST-EVER ORTHODONTIC NO MIX SELF-ETCH PRIMER PROVIDES RELIABLE BONDING FOR:.
Bracket and tube placement
Reliance S.E.P. ™
Application Methods
Method 1:
Mixing Well Dispense For Multiple Teeth
Squeeze into well (no mixing)
Dip microbrush and apply
Method 2:
Ring Well Dispense For Easy Access
Use with Reliance dual ring well Ideal for quick team setups
Reduce micro inefficiencies
Step-by-Step Technique
Aggressively scrub USEP onto enamel with microbrush for 5 seconds or until becomes coarse
Air dry thoroughly
Apply Assure® Plus
(optional for enhanced bond strength)
Air dry again
Deliver bracket and cure
Method 3:
Direct-To-Brush
Vertical dispense onto microbrush
Great for rebonds and reducing waste
y Etchant and bonding primer
y One step application
y Click-syringe dispenses pre-measured amounts
y Each dispensing click conditions 12-14 teeth
y No need to etch before applying S.E.P.
ALL SURFACE BOND ENHANCEMENT KIT
PREPS ANY ARTIFICIAL SUBSTRATE
y Everything needed for bonding any artificial substrate
y Maximum bond strength with no additional primers
- Wet or dry, normal or atypical enamel, composite, metal, porcelain, acrylic and zirconia
Tooth Preparation
Blue Gel Etchant
Gel Etchant Liquid Etchant
Clean Up &
Polishing
Lingual Retention
y Micro+ nano fill for flowable consistency with durability of highly filled composite
y Effortlessly slumps over wire
y Fluoresces w/blacklight
y Patient comfort - reduced wear
y Developed for BLR applications
* Full description on Page 7
APPLICATION
y Cures glassy smooth
y Slumps over wire
y Fluoresces w/ blacklight
* Full description on Page 41
Ortho FlexTech®
Patented linkage design allows true passive retention
Secure, stable, long-term retention minimizes the risk of relapse
Adapts easily to lingual anatomy—no models, scans or lab fees
Linkage design allows minor biological movement to eliminate premature breakage, yet retains final arch finish
Low profile design enhances patient comfort
Product Insights
Patented interlocking chain design
Directly position on the patient’s arch
Titanium molybdenum wire
Low profile .027 TMA wire
Can be bonded to all 6 anteriors or to cuspids only
and
cuspid
(25) Arch Measuring Devices
LCR is designed specifically for bonded retainers!
LCR is a modified flowable - combining nano-particle technology for smooth as glass finish and micro-fill to mimic the wear resistance of "packable" materials (Appears on Page 42)
LINGUAL RETENTION
y Retainium: 027" x .011"
y Retainium XL: 027" x .016"
y Low profile – comfortable and functional
y Increased strength
y Fixed lingual retention
y Diastema maintenance
y Space maintenance
y Splinting
y MRI compatible
y Easy adaptation
y Flexes Interproximally
y Nickel free
y The dead soft wire easily adapts and is excellent for semi-permanent orthodontic splinting of
TITANIUM RETAINER WIRE
Restorative Solutions
Perfect A Smile®
Simple Fabrication Steps
Patented technology for reliable, natural looking temporary restorations
Eliminates flippers (aesthetic treatment alternative)
Congenital or trauma aesthetic replacements
Grafting/implant integration friendly
Pre-pontic / peg lateral relief
Economical & Efficient
Same day turnaround - with a vacu-formed tray
No emergency schedule disruption
No doctor chairtime (staff delegated)
No lab costs or delays
No pontic sizing or inventories
High modulus of elasticity - will not crack or splinter
INFORMATION
Most Popular Shades A2, B1, D3 and C4
4g Jar PP/Bleach #PPBL
4g Jar PP/A1 Shade #PPA1
4g Jar PP/A2 Shade #PPA2
4g Jar PP/A3.5 Shade #PPA35
4g Jar PP/B1 Shade #PPB1
4g Jar PP/C1 Shade #PPC1
4g Jar PP/C4 Shade #PPC4
4g Jar PP/D3 Shade #PPD3 4g Jar PP/Light Shade #PASL
Jar PP/Medium Shade #PASM
Paste In Syringe #LBOPS
1. Form a tooth and add to the edentulous space on a patient model
Dispense 1/2" of Pontic Putty onto gloved finger, manipulate into oval and place on model (FIG 1, 2 and 3)
Vaccu-form aligner material and trim tray (FIG 6)
With a microbrush, apply a very thin layer to inside of tray
Light cure and repeat the application process; curing between coats. Be sure not to apply any coat too thickenjoy final product
Product works great when using with clear aligners and a tooth is missing. It is a great tool to have, while waiting to restore an implant or complete expansion before placing implants.
– Megan Swander, Cedar Lodge Dental Group
Perfect A Smile
PONTIC PUTTY
Fingertip Pontic Fabrication
Light cure composite paste
Putty-like consistency
Facilitates tooth shape formation
Eliminates pontics, wax and PVS
Bonds tenaciously to stone/resin models
Provides proper clear aligner anatomy
instrument
fine tuning (FIG 4)
cure (FIG 5)
2. Vaccuform a plastic tray 3. Paint the tray socket to create a temporary crown
Patient B.B. - PAS Shade: A2
Acrylic Appliance Bonding
TNT Archwires
Specialty NITI Archwires
5 sizes and 4 forces provide the treatment choices for any applied mechanics
Precision manufacturing techniques and in-process testing assure force accuracy Light retardant packaging to eliminate UV degradation
Custom Base Indirect Bonding
y Tacky paste viscosity
y Unlimited working time
y Heat curable
y Highly filled composite
y Viscous to resist drift on resin and stone models
y Extended working time to allow bracket manipulation
y Single-piece flash clean-up
Clean Base IDB Adhesives
y Hybrid flowable consistency allows for instant bracket mesh penetration
y Resin matrix holding capacity allows for pre-loading up to 7 days in advance
with durability of highly filled composite y Fluoresces for easy removal
y Needle tip dispenser
- Using the tips provided, these materials are easily injected onto custom pads
y Low modulus of elasticity to resist breakage
y Highly filled to bridge gaps between custom pads and tooth surface
y
y
y Self-curing
y Product must be
nightly
Terms & Conditions
Mark II CR Syringe
ORDER INFORMATION Mark II CR Syringe #CRII
y Used with pre-loaded adhesive tips
ORDERING
To order Reliance Orthodontic Products, simply contact our home office Toll-Free (in U.S.) at 1-800-323-4348 or 1-630-773-4009. You may also order through our secure website at www.RelianceOrthodontics.com.
SHIPPING
All prices are F.O.B. Itasca. All shipping is billed with the order. Please call for more information.
EXPORT
Export orders must be paid for in advance by proforma invoice.
TERMS
Net 30 days upon approval. Sales tax added where applicable. All payments are due in U.S. funds.
y Prep bur y Roughens surface
* Other burs appear on Page 31
EXCHANGES OR REFUNDS
Your satisfaction is Guaranteed! Reliance Orthodontic Products, Inc. guarantees that our products are of the highest quality and workmanship. If at any time prior to its expiration date your adhesive system fails to perform in a manner not consistent with the product, we will replace the remaining product with new material free of charge or issue a credit for the remaining product. Please check your order for accuracy. Any discrepancies must be reported to Reliance within 7 days. No refunds, credits, or replacement will be issued after 30 days unless the product is deemed defective by Reliance Orthodontic Products, Inc. Products that are being returned to Reliance Orthodontic Products, Inc. must have a prior Return Authorization Number (RMA). All products being returned for credit or replacement must be sent postage paid with a copy of your invoice and your RMA number clearly visible on the package, or the package will be refused by Reliance Orthodontic Products, Inc. A restocking fee may be applicable.
ORDER INFORMATION
Tie Hooks .010 100/Pkg #K10
Tie Hooks .012 100/Pkg #K12
Tie Hooks .014 100/Pkg #K14
Pre-Twisted .010 100/Pkg #SK10
Pre-Twisted .012 100/Pkg #SK12
Pre-Twisted .014 100/Pkg #SK14
CONTACT 1540 West Thorndale Ave., PO Box 678, Itasca, IL 60143 USA
1-800-323-4348
Phone 1-630-773-4009 Fax 1-630-250-7704
Please email any questions or comments to info@relianceorthodontics.com
