PAL Stop'z Mould Product Sheet

STOP’Z MOULD PAINT ADDITIVE

Available in 100ml.

Exclusively distributed by Paint Aids Limited PO Box 73161, Auckland Airport, Manukau 2150, NZ. Phone. 09 2575151 | Fax. 09 2575152

Fungicidal Paint Additive to prevent mould Ideal for Paints – Stains and Grout

PRODUCT DESCRIPTION

FUNGICIDAL PAINT ADDITIVE TO PREVENT MOULD IDEAL FOR PAINTS – STAINS AND GROUT CAN BE USED IN WATER BASED AND OIL BASED COATINGS: - 100ml enough for 10 litres.

- Will not alter the colour or texture of the product you are adding it to.

- Forms a film on the surface of the coating to prevent the growth of mould.

WHAT DOES IT DO? In damp or humid conditions most surfaces discolour and stain with unsightly mould and mildew growth which, unless checked, continues to be a problem for the life of the surface. The time to treat surfaces against mould growth is when paint is applied. A few drops of STOP’Z MOULD added to the paint and your surfaces will stay like new without unsightly and musty smelling mould.

WHAT IS IT? STOP’Z MOULD is a powerful, long lasting mould and algae killer which can be added to a wide range of products such as paint, timber stains, textured coatings, grout, mortar and adhesives to prevent the formation of mould and mildew.

It is an inexpensive paint additive which gives long term protection from unsightly mould and is suitable for most paints. However, as it is impossible for us to test it in every paint on the market, it is advisable to always mix a small sample first to check if it blends with the paint. STOP’Z MOULD can also be used to form a clear long-life protective anti-mould film to surfaces which are to be left in their natural state.

PRE-TREATMENT USING REMOVE’Z MOULD If existing mould is evident then treat first with Red Enz Remove’z Mould or similar mould killer. Paint within 48 hours of applying mould killer.

TO PREVENT MOULD GROWTH Water based and solvent based paints and stains: Add 10ml of STOP’Z MOULD per litre of paint or stain and stir thoroughly.

Mortar, grout, textured coatings, fillers, adhesives: Add 10ml of STOP’Z MOULD to each kg of ready to use product.

LIABILITY & WARRANTY Stop’z Mould is not to be used for any other purpose than recommended by the manufacturer on this label. Warranty of this product is limited to replacement of this product or the purchase price of this product.