SPRING SEASON PRICES

31021524

MODULO 11000 WITH 7.5 M PENDISLIDE BASIC

Single axle, Sprung drawbar, Ring hitch, Air brakes only, Load sensing on the air brakes, 800/65 R32 Alliance A360 tyres, 2 rear LED work lights and rear beacon,10600l/min Jurop vacuum pump (1000rpm), Wide angle PTO shaft, Hydraulic pump change over, 1x 6” filling valve with Perrot coupling and 6” filling pipe, 6” sight tube on front of tanker, Preequipment for Jumbo arm.

£38,750

21030344

MODULO 11000 WITH REAR 7.5M PENDILSIDE BASIC (WITH EXACT SCATTER)

Single axle, Sprung drawbar, Ring hitch, Air and Hydraulic brakes, Load sensing on the air brakes, 800/65 R32 Alliance A360 tyres, 2 rear LED work lights and rear beacon, 10600l/min Jurop vacuum pump (540rpm), Wide angle pto shaft, 8” Jumbo arm with 4m 8” pipe and fill pot, 1x 6” filling valve with Italy coupling, 6” sight tube on front of tanker, Hydraulic mixer in the tank

New

31028925

VOLUMETRA 16500D

Twin commercial axle on hydraulic suspension, Simplified hydraulic drawbar suspension, Free steer rear axle, K80 ball hitch, Load sensing air brakes only (no hydraulic brakes) 710/50 R26.5 Alliance A885 tyres, 2 rear LED work lights and rear beacon, 15500l/min Jurop vacuum pump (1000rpm), Wide angle pto shaft, 8” Jumbo arm with 4m 8” pipe and fill pot,1x 6” filling valve with perrot coupling and 4m of 6” filling pipe, 6” sight tube on front of tanker, Exact scatter, Pre-equipment for rear linkage, Pre-equipment for hydraulic tank mixer, Pre-equipment for hydraulic door on top of tanker.

11029175

VOLUMETRA 18000D

Twin commercial axle on hydraulic suspension, Simplified hydraulic drawbar suspension, Free steer rear axle, K80 ball hitch, Load sensing air brakes only (no hydraulic brakes), 710/50 R30.5 Alliance A885 tyres, 2 rear LED work lights and rear beacon, 15500l/min Jurop vacuum pump (1000rpm), Wide angle PTO shaft, 8” Jumbo arm with 4m 8” pipe and fill pot, Internal pipe to empty through Jumbo arm, 1x 6” filling valve with perrot coupling and 4m of 6” filling pipe, 6” sight tube on front of tanker, Rear linkage ready, Exact scatter, Pre-equipment for hydraulic tank mixer, Pre-equipment for hydraulic door mount on the top of the tanker.

New

7.5M PENDISLIDE BASIC

7.5m dribble bar spreading boom with 36 outlets

11028185

MODULO 2 18000D

Twin commercial axle on leaf sprung roll-over bogie, Leaf spring drawbar, Free steer rear axle, Ring hitch, Load sensing air brakes only (no hydraulic brakes), 710/50 R30.5 Alliance A885 tyres, 15500l/min Jurop vacuum pump (1000rpm), Wide angle pto shaft, 8” Jumbo arm and turbo filler with 4m 8” pipe and fill pot, 1x 6” filling valve with perrot coupling and 4m of 6” filling pipe, 6” sight tube on front of tanker, Hydraulic mixer in the tank, 7.5m pendislide basic boom with skids mounted to rear main frame (no linkage), Exact scatter mounted to 7.5m pendislide boom.

•

• 2x eccentric scalper macerator (1 for left side and 1 for right side)

• Half width spreading (hydraulic gate valve for left and right side)

• Outlets mount on leaf springs with skids

• 1x central eccentric scalper macerator

Built in 1+3 hydraulic functions, only requires 1 tractor SCV

• Twist anti-drip system

• Rear exact scatter and rear road lights

Can be fitted to a tanker with or without a linkage (extra fitting kit required):

11029185

VOLUMETRA 18000D

Twin commercial axle on hydraulic suspension, Simplified hydraulic drawbar suspension, Forced steer rear axle with 50mm hitching ball, K80 ball hitch, Load sensing air brakes only (no hydraulic brakes), 710/50 R30.5 Vredestein tyres, 2 rear LED work lights and rear beacon, 15500l/min Jurop vacuum pump (1000rpm), Wide angle PTO shaft, 8” Jumbo arm and turbo filler with 4m 8” pipe and fill pot, Internal pipe to empty through Jumbo arm, 1x 6” filling valve with perrot coupling and 4m of 6” filling pipe, 6” sight tube on front of tanker, Rear linkage with hydraulics to suit (small screen on control box, controls implement), Exact scatter on removable frame mounted to rear linkage, Preequipment for hydraulic tank mixer.

EQUIPMENT READY FOR PRE-SEASON SPRING 2023 DELIVERY!

HIGH-DENSITY BALING AT ITS FINEST

Designed and built to last for all crop conditions. Produces the perfect bale shape and densities to match your requirements with the proven KUHN INTEGRAL ROTOR intake technology.

01283 821345

AUTOMATIC GREASING SYSTEM

SB 1290 iD is designed to produce bales with an extremely high density in all crop conditions. Thanks to the patented TWINPACT plunger technique, the baler has a lower power requirement and lends to more profitable baling operation. Apart from the density, the bale channel, driveline and transmission have been upgraded which lends to further cost savings for the operator. A 200hp tractor is more than capable of producing 500kg plus bales, providing you significant fuel savings.

KUHN FBP 3135 Baler-wrapper Combination

This combination creates the highest bale quality at the lowest cost. A high quality wrapped bale is achieved through film binding and 3D wrapping techniques. The TWIN-reel film binding and INTELLIWRAP contribute to the lowest film cost per bale.

ISOBUS COMPATIBLE

01283

821345

The TWINPACT:

‘INTELLIGENT-DENSITY’ MODEL

Designed to produce bales (120 x 90) with up to 25% higher bale density in tough dry straw conditions compared to conventional large square balers.

ISOBUS COMPATIBLE

DOUBLE KNOTTING WITH ELECTRONIC MONITORING

• Ensures intelligent, efficient bale compaction whilst avoiding high peak loads on the machine.

• Gives you the possibility to work with similar tractor sizes as with conventional 120 x 90 balers.

• Produces bales that are 25% heavier in dry crop conditions.

REDUCE COSTS

With the TWIN-REEL film wrapping system SAVE a minimum of 37% on film binding costs. The patented KUHN film binding system uses two 750mm stretchfilm rolls and gives a much high stretch to reduce costs by 37%, reduce the number of roll changes and reduce time.

Watch the video: TWIN-REEL film binding explained

ROBUST BALE CHAMBER

18 POWERTRACK rollers generate high densities and reliable bale rotation all crop conditions. The rollers have built in scrapers to push the material out the way.

INTELLIWRAP

Distributes film uniformly and efficiently across the entire surface of the bale. Use just enough film, with Intelliwrap determine exactly the number of layers required, don’t waste film and use just enough to keep the feed quality high during bale storage.

Watch the video: 3D WRAPPING explained

Watch the video: INTELLIWRAP explained

VB3165 Round Baler

Bale diameter 80-160cm

Bale width 120cm

The KUHN VB 3165 Premium model is designed to work in the toughest conditions. Ideal for custom operators who need extra density in straw. Built for high-volume baling, these models feature heavy-duty components to keep you producing rockhard bales, bale after bale, day after day.

The rotor disengagement and DROPFLOOR technology ensure a fast clearance in case of a blockage and enable to quickly continue baling.

The VB range can be equipped with a KUHN camera system to provide optimal visibility and safety around the machine. There are two kits available, one kit is compatible with the CCI 1200 terminal, the other one consists of a separate monitor and a camera.

01283 821345

PROGRESSIVE DENSITY

The proven system increases tension as the bale grows providing a firm bale with a tough outer shell.

ROBUST DRIVELINE

High quality IWIS chains + 11/4” 20BH primary driveline with chrome hardened pins.

INTEGRAL ROTOR TECHNOLOGY

KUHN Maize Drill

MAXIMA 3 RXe

• 8 row

• 75cm row spacing

• 3m transport width

• 120-180kg ground pressure capacity

• 50L hopper capacity

• Type of seeds: maize, corn, sunflower, beets, rapeseed, sorghum, soybeans

The load-bearing wheels on the front of the chassis on the MAXIMA 3 RX make it easier to move stones between the seeding units and provide better soil adaptation even on slopes. The chassis in three independent parts offers excellent ground following even in difficult conditions.

Book in a demo ready for the Maize drilling season ahead!

T 03300 568800

OPTIMUM PRECISION

PRECISION UP TO 10 KM/H

BOOK IN A DEMO NOW!

For economies of scale, regular seed placement and high yields. The MAXIMA is a robust seeding unit for long service life and outstanding reliability, it offers easy and quick adjustments and maintenance of the seeding unit and higher seeding speed with optimised precision up to 10 km/h.

ELECTRIC DRIVE please visit

Offers adjustment of the seedling population from the cabin, modulation of seeding application rate and row shut-off by GPS/manually. A 48V system ensures smooth and continuous rotation for high precision even during, vertical accelerations, acceleration and deceleration on headlands or dusty environments.

Exceptional stability and ensures a very regular seeding depth thanks to its powerful furrowing system. In addition, the seed drop point is where the gauge wheels touch the soil for perfect seed placement. The new parallelogram in moulded parts clearly reinforces the robustness, the fertiliser applicator as well as the entire plate of the unit has also been modified for greater longevity. The MAXIMA 3 also has fewer wear parts and a greater travel. It has easy and intuitive settings, adjustments are done without tools for more comfort and speed. GPS automatic row shut-off to prevent overlaps in the points improves yield and reduces seed costs.

If you would like replacement parts please contact Ed Worts or your nearest RVT depot Parts Department for a competitive quote.

HARVEST PRODUCT SPECIALIST Nick Wells

Rea Valley Tractors Harvest Product Specialist Nick Wells offers Sales, Service and Precision support covering the full New Holland harvest range. Starting out as Demonstrator/Machinery Installer with Precision Farming, 13 years ago, Nick gained full in-depth knowledge of precision technology and then moved into Sales in 2016. Nick’s extensive knowledge of harvest machinery gives customers a high standard of support to agri-businesses throughout the life span of the machines.

From offering expert advice, to helping to choose the right machine for your business, through to full installation and setup, Nick will help obtain optimum output, uptime and efficiency of your harvest equipment. During harvest Nick will be on hand for season setup and optimisation and will offer full operational support, either remotely or in-field, so you can be confident of a complete back-up support package with Nick and the RVT team.

‘We are here to support your business and now is the time to get ready for harvest with valuable pre-season checks and maintenance on your harvest machinery. Please contact myself directly or your nearest RVT depot for a competitive quote, we have a team of specialist harvest technicians across all RVT depots for any maintenance and repairs to ensure your equipment is prepared and ready for the season ahead.’

‘With such an array of New Holland harvest machinery to offer we will look forward to organising some Harvest Evenings later in the year with a focus on the New Holland combines and balers. We encourage you to attend these harvest events as they are a great way, not only to gain more insight into these machines, but to also ask any questions and give feedback. It is important to us that we listen to our customers so we can continually develop our harvest experience,’ says Nick.

Once harvest is over it doesn’t stop there, it’s time to clean & blow down the machines and Nick will also be there to support your post-harvest checks and help review the performance and crop yields using the Precision technology available. A full data analysis will bring insights into your harvest and help to make valuable decisions for next year.

Get the full harvest support package and call Nick today 07850 003586 to discuss your harvest machinery requirements.