Issuu on Google+


TABLE OF CONTENTS FF SERIES FLOAT FINISH HOUSING CONTOUR PROJECTOR FLOAT FINISH HOUSING The Phantom Contour Projector FF Series (float finish or zero sight line) housing is used for custom applications when attic access may not be available but primarily when a visible cover plate would be inappropriate for the ceiling finish. The result is an inconspicuous penetration of the ceiling that is virtually invisible once installed and the float ring is finished and painted to match the ceiling. Phantom Contour Projectors are designed by a professional installer and have been engineered so a novice, do it yourselfer or qualified electrican can successfully perform a successful lighting installation. The patented mounting method, simplified optical system and the ability to use both shutters and custom templates make this one of the most versatile and awesome low voltage art lighting fixtures on the market today. By shaping the light to only the canvas, the art takes on a “Lighted from within” look that can only be seen to appreciate.

SPECIFICATIONS/FEATURES PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm condensing lenses and two more 39mm, 75fl focal lenses standard (150fl focal lenses, available for longer, narrower throws, are available as a special order option.) See photometric chart on back of cut sheet or projector supplement for more information regarding lens selection. LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base with average lamp life of 3500 hours and color temperature of 3000K. Lamp Code: JCR12V-75W/FO HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing is low profile and designed to accommodate the most demanding application.

C

ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating ring is flexible and designed for a full 360 degree rotation with four positive locking knobs to secure the projector into position.

ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0 U.S. PATENT #6,832,845

US

73355

MOUNTING CRADLE: Constructed of .08 (#5052) aluminum, this universal cradle has multiple anchoring slots and a two-position pivot option for both vertical and horizontal applications up to 55 degrees. ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an electronic 120/12V step down power supply. Magnetic transformers and 277V options are available upon request. The junction box is listed for branch circuit wiring and comes equipped with a thermal protector that provides protection against over lamping and improper installation of ceiling insulation. Thermal Protector meets NEC and UL requirements. FLOAT PLATE: Constructed of .08 (#5052) aluminum, this low profile plate is designed to be floated and textured to match the ceiling and provide for access from below. CEILING PLATE: Constructed of .06 (#5052) aluminum this low profile plate has a unique tapered edge, and adjustable glare shield, and matte finish for a smooth ceiling transition.

ORDERING INFORMATION ORDERING EXAMPLE:

TEMPLATE ORDER CODE #

FLOAT FINISH HOUSING INCLUDING 75 WATT OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS, 120V ELECTRONIC TRANSFORMER, 75FL LENSES & UNFINISHED COVER PLATE

F F

1

1

1

R

FF

R

HOUSING

TEMPLATE

TRANSFORMER

OPTIONS

MOUNT ORDER CODE #

Shutters Metal Slide Metal Gobo Glass Gobo

1 2 3 4

U

MOUNT

DESCRIPTION

1 2 3 4

TRANSFORMER ORDER CODE # DESCRIPTION

U

DESCRIPTION

1 2 3 4

None UV Filter 150fl Lenses Pin Hole Cover

FF SERIES

3-4

NC SERIES

5-6

RM SERIES

7-8

SM SERIES

9-10

TA SERIES

11-12

DESCRIPTION

R

Recessed

COLOR ORDER CODE #

DESCRIPTION

U

Unfinished

Electronic 120V Electronic 277V Magnetic 120V Magnetic 277V

OPTIONS ORDER CODE #

COLOR

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

TM

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems

NC SERIES NEW CONSTRUCTION CONTOUR PROJECTOR

HOUSING

NEW CONSTRUCTION HOUSING The Phantom Contour Projector NC Series (new construction housing) is designed for installation prior to completion of a sheetrock ceiling. Mounting bars are designed for joist spacing up to 24” wide and 10” high. The round cover plate has a unique glare shield, tapered edge and matte white finish for a smooth ceiling transition. Phantom art projector lights are designed by a professional installer and have been engineered so a novice, do it yourselfer or qualified electrican can successfully illuminate art. The patented mounting method, simplified optical system and the ability to use both shutters and custom templates make this one of the most versatile and best art lighting fixtures on the market today. By shaping the light to only the canvas, the art takes on a “Lighted from within” look that can only be seen to appreciate.

SPECIFICATIONS/FEATURES PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm condensing lenses and two more 39mm, 75fl focal lenses standard (150fl focal lenses, engineered for longer, narrower throws, are available as a special order option.) See photometric chart on back of cut sheet or projector supplement for more information regarding lens selection. LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base with average lamp life of 3500 hours and color temperature of 3000K. Lamp Code: JCR12V-75W/FO HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing is low profile and designed to accommodate the most demanding application. ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating ring is flexible and designed for a full 360 degree rotation with four positive locking knobs to secure the projector into position. C

MOUNTING CRADLE: Constructed of .08 (#5052) aluminum, this universal cradle has multiple anchoring slots and a two-position pivot option for both vertical and horizontal applications up to 55 degrees.

ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0 U.S. PATENT #6,832,845

US

73355

MOUNTING BRACKETS: Constructed of 1/8” cold rolled steel, these heavy-duty bars are designed to accommodate up to 24” joist spacing. Commercial brackets are available by special order. PLASTER RING: Constructed of .05 (#5052) aluminum, this feature is designed for both drywall and plaster ceiling applications. ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an electronic 120/12V step down power supply. Magnetic transformers and 277V options are available upon request. The junction box is listed for branch circuit wiring and comes equipped with a thermal protector that provides protection against over lamping and improper installation of ceiling insulation. Thermal Protector meets NEC and UL requirements. CEILING PLATE: Constructed of .06 (#5052) aluminum this low profile plate has a unique tapered edge, and adjustable glare shield, and matte finish for a smooth ceiling transition.

ORDERING INFORMATION ORDERING EXAMPLE:

TEMPLATE ORDER CODE #

NEW CONSTRUCTION HOUSING INCLUDING 75 WATT OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS, 120V ELECTRONIC TRANSFORMER, 75FL LENSES & UNFINISHED COVER PLATE

N C

1

1

1

R

NC TEMPLATE

TRANSFORMER

OPTIONS

MOUNT

MOUNT ORDER CODE #

DESCRIPTION

1 2 3 4

Shutters Metal Slide Metal Gobo Glass Gobo

TRANSFORMER ORDER CODE # DESCRIPTION

W

1 2 3 4

R

HOUSING

DESCRIPTION

1 2 3 4

None UV Filter 150fl Lenses Pin Hole Cover

DESCRIPTION

R

Recessed

COLOR ORDER CODE #

DESCRIPTION

W B C U

Matte White Matte Black Custom Unfinished

Electronic 120V Electronic 277V Magnetic 120V Magnetic 277V

OPTIONS ORDER CODE # COLOR

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

TM

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems

RM SERIES REMODELER HOUSING CONTOUR PROJECTOR REMODELER HOUSING A first in the industry, the Phantom Contour Projector RM Series (remodel housing) is specifically designed for installation between floors and with minimal disruption to the ceiling. The low profile design permits installation in existing ceilings with joists as shallow as 10 “ deep. The round cover plate has a unique glare shield, tapered edge and matte white finish for a smooth ceiling transition. Phantom recessed lighting projectors are designed by a professional installer and have been engineered so a novice, do it yourselfer or qualified electrican can successfully illuminate art. The patented mounting method, precision optical design and the ability to use both shutters and custom templates make this one of the most versatile and awesome fine art lighting fixtures manufactured on the market today. By shaping the light to only the canvas, the art takes on a “Lighted from within” look that can only be seen to appreciate.

SPECIFICATIONS/FEATURES PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm condensing lenses and two more 39mm, 75fl focal lenses standard (150fl focal lenses, engineered for longer, narrower throws, are available as a special order option.) See photometric chart on back of cut sheet or projector supplement for more information regarding lens selection. LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base with average lamp life of 3500 hours and color temperature of 3000K. Lamp Code: JCR12V-75W/FO HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing is low profile and designed to accommodate the most demanding application.

C

ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating ring is flexible and designed for a full 360 degree rotation with four positive locking knobs to secure the projector into position.

ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0 U.S. PATENT #6,832,845

US

73355

MOUNTING FLANGE: Constructed of .08 (#5052) aluminum, this universal cradle has multiple anchoring slots and a two-position pivot option for both vertical and horizontal applications up to 55 degrees. MOUNTING CLIPS: Constructed of .08 (#5052) aluminum, these (4) snap in right angle clips are designed to support the round housing and secure the mounting flange and ceiling plate for ceilings up to 2” thick. ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an electronic 120/12V step down power supply. Magnetic transformers and 277V options are available upon request. The junction box is listed for branch circuit wiring and comes equipped with a thermal protector that provides protection against over lamping and improper installation of ceiling insulation. Thermal Protector meets NEC and UL requirements. CEILING PLATE: Constructed of .06 (#5052) aluminum this low profile plate has a unique tapered edge, and adjustable glare shield, and matte finish for a smooth ceiling transition.

ORDERING INFORMATION ORDERING EXAMPLE:

TEMPLATE ORDER CODE #

REMODELER HOUSING INCLUDING 75 WATT OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS, 120V ELECTRONIC TRANSFORMER, 75FL LENSES & UNFINISHED COVER PLATE

R M

1

1

1

R

RM HOUSING

TEMPLATE

TRANSFORMER

OPTIONS

MOUNT

MOUNT ORDER CODE #

DESCRIPTION

1 2 3 4

Shutters Metal Slide Metal Gobo Glass Gobo

TRANSFORMER DESCRIPTION ORDER CODE #

W

1 2 3 4

R

DESCRIPTION

1 2 3 4

None UV Filter 150fl Lenses Pin Hole Cover

DESCRIPTION

R

Recessed

COLOR ORDER CODE #

DESCRIPTION

W B C

Matte White Matte Black Custom

Electronic 120V Electronic 277V Magnetic 120V Magnetic 277V

OPTIONS ORDER CODE # COLOR

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

TM

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems

SM SERIES SURFACE MOUNT CONTOUR PROJECTOR

PROJECTOR

SURFACE MOUNT PROJECTOR The Phantom Contour Projector SM Series (surface mount) is the most economical, easy to install framing projector for lighting pictures on the market today. The sleek design, precision optics and choice of adjustable shutters or custom cut template make the Phantom Contour Projector perfect for homes, offices, art galleries and fine restaurants. The projector is available with either a Standard canopy or Low Profile canopy. Custom Powdercoat finishes (Black or White) are available options in addition to the standard finish. Phantom Contour Projectors are designed by a professional installer and have been engineered so a novice, do it yourselfer or qualified electrican can successfully illuminate art. The patented mounting method, simplified optical system and the ability to use both shutters and custom templates make this one of the most versatile and easy to use lights for art gallery lighting on the market today. By shaping the light to only the canvas, the art takes on a “Lighted from within” look that can only be seen to appreciate.

SPECIFICATIONS/FEATURES PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm condensing lenses and two more 39mm, 75fl focal lenses standard (150fl focal lenses, engineered for longer, narrower throws, are available as a special order option.) See photometric chart on back of cut sheet or projector supplement for more information regarding lens selection.

C

LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base with average lamp life of 3500 hours and color temperature of 3000K. Lamp Code: JCR12V-75W/FO

ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0 U.S. PATENT #6,832,845

US

MOUNTING ARM: Constructed of .08 (#5052) aluminum, this heavy duty bracket and canopy are designed for a full 358 degree rotation and features a threaded locking mechanism. For track applications the canopy can be replaced with a pendant mount track adapter.

73355

MOUNTING CANOPY: Constructed of .08 (#5052) our aluminum mounting canopies are available in two distinct profiles. The low profile canopy is designed specifically for remote transformer applications. The standard profile is designed to house the electronic transformer and box wiring.

LOW PROFILE CANOPY

TRANSFORMER: Located in the canopy the 120V step down transformer to 12V is designed for easy installation. The electronic transformer provides protection against over-lamping and short circuit conditions. 277V available by special order.

STANDARD CANOPY

ORDERING INFORMATION ORDERING EXAMPLE:

TEMPLATE ORDER CODE #

SURFACE MOUNT HOUSING INCLUDING 75 WATT OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS, 120V ELECTRONIC TRANSFORMER, 75FL LENSES & UNFINISHED COVER PLATE

MOUNT ORDER CODE #

DESCRIPTION

1 2 3 4

Shutters Metal Slide Metal Gobo Glass Gobo

S L T*

DESCRIPTION Standard Canopy Low Profile Canopy Track* *Specify Manufacturer

S M

1

1

1

S

TRANSFORMER ORDER CODE # DESCRIPTION

U

1 2

TEMPLATE

TRANSFORMER

OPTIONS

MOUNT

DESCRIPTION

1 2 3

None UV Filter 150fl Lenses

COLOR

COLOR ORDER CODE #

DESCRIPTION

W B C U

Matte White Matte Black Custom Unfinished

Electronic 120V Electronic 277V

OPTIONS ORDER CODE #

SM HOUSING

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

TM

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems

TA SERIES TOP

ACCESS

HOUSING

CONTOUR PROJECTOR DESCRIPTION The Phantom Contour Projector TA Series (top access ONLY design) is perfect for custom applications that require a smooth ceiling appearance and attic access is available. This model is used when access from below is not practical or you want to minimize the ceiling penetration and will be performing a custom cut template installation similar to the Wendel technique. Phantom Contour art projector lights are designed by a professional installer and have been engineered so a novice, do it yourselfer or qualified electrican can successfully illuminate art. The patented mounting method, simplified projector optical design and the custom cut template technique make this one of the most versatile and awesome low voltage art lighting fixtures on the market today. By shaping the light to only the canvas, the art takes on a “Lighted from within” look that can only be seen to appreciate.

SPECIFICATIONS/FEATURES PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm condensing lenses and two more 39mm, 75fl focal lenses standard (150fl focal lenses, engineered for longer, narrower throws, are available as a special order option.) See photometric chart on back of cut sheet or projector supplement for more information regarding lens selection. LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base with average lamp life of 3500 hours and color temperature of 3000K. Lamp Code: JCR12V-75W/FO HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing is low profile and designed to accommodate the most demanding application.

C

ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating ring is flexible and designed for a full 360 degree rotation with four positive locking knobs to secure the projector into position.

ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0 U.S. PATENT #6,832,845

US

73355

MOUNTING CRADLE: Constructed of .08 (#5052) aluminum, this universal cradle has three anchoring slots and multiple pivoting positions for both vertical and horizontal applications up to 55 degrees. MOUNTING BRACKETS: Constructed of 1/8” cold rolled steel, these heavy-duty bars are designed to accommodate up to 24” joist spacing. Commercial brackets are available by special order. ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an electronic 120/12V step down power supply. Magnetic transformers and 277V options are available upon request. The junction box is listed for branch circuit wiring and comes equipped with a thermal protector that provides protection against over lamping and improper installation of ceiling insulation. Thermal Protector meets NEC and UL requirements. HEAT SHIELD: Constructed of .05 (#5052) aluminum this protective disk has two easy to remove perforated knockouts to accommodate both vertical and horizontal installations.

ORDERING INFORMATION ORDERING EXAMPLE:

TEMPLATE ORDER CODE #

TOP ACCESS HOUSING INCLUDING 75 WATT OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS, 120V ELECTRONIC TRANSFORMER, 75FL LENSES & UNFINISHED COVER PLATE

MOUNT ORDER CODE #

DESCRIPTION

2 3 4

Metal Slide Metal Gobo Glass Gobo

TRANSFORMER ORDER CODE # DESCRIPTION

T A

2

1

1

R

TA

U

R

HOUSING

TEMPLATE

TRANSFORMER

OPTIONS

1 2 3 4

U

MOUNT

DESCRIPTION

1 2 3 4

None UV Filter 150fl Lenses Pin Hole Cover

DESCRIPTION

R

Recessed

COLOR ORDER CODE #

DESCRIPTION

U

Unfinished

Electronic 120V Electronic 277V Magnetic 120V Magnetic 277V

OPTIONS ORDER CODE #

COLOR

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

TM

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems

PROJECTOR SUPPLEMENT INSTRUCTION SHEET

PROJECTOR SUPPLEMENT FOR PHANTOMTM CONTOUR PROJECTORS Please read all the instructions in this supplement before proceeding with the installation. This fixture is intended for installation in accordance with the National Electric Codes regulations. To prevent electric shock, turn off electricity at the fuse box before proceeding. These instructions are designed as a general overview and guide for a typical installation. Retain these instructions for future needs and maintenance reference. FOR QUESTIONS REGARDING YOUR APPLICATION CONTACT CUSTOMER SERVICE (MONDAY THRU FRIDAY 8:00 A.M. - 4:00 P.M. CST) TOLL FREE 1-800-863-1184.

EXPLODED VIEW 1 2 3 4 5

Lamp Assembly

Focal Lens Clip

19

Focal Lens Spacer

20

Focal Cone (Towards Back) Hose Clamp Tapered Frontal Cone

9 10

21

Focal Lens

Focal Lens

6 7 8

18 17

Masking Ring

16

Front Condensor Retainer Condensor Assembly

Back Condensor Tube

15

14 13

11

Single Convex Condensing Lens

12

Double Convex Condensing Lens

10

13

Condensor Spacer

12

14

11

15

Lamp Spring Projector Body

16

Back Condenser Retainer

17

Optional UV Filter

9 Focal Cone Assembly

7 6

18

75MR16/FO Lamp

19

Lamp Spacer

PROJECTOR SUPPLEMENT

13-16

TEMPLATE INSTRUCTIONS

17-18

20 Lamp Retainer Ring

8

21

Back Cap

5

4 3 12

C

US

ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0 U.S. PATENT #6,832,845 & OTHER US PATENTS PENDING

73355

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems

TEMPLATE INSTRUCTIONS CUSTOM BRASS CONTOUR PROJECTOR

TEMPLATE

INSTRUCTIONS

Cutting brass confinement templates has always been a mystery to most people trying to install projectors and therefore left to professional installers, adding frustration and cost to the project. The Phantom Contour Projector is designed with the installer in mind and cutting confinement templates has never been easier. Sure, practice makes perfect but that can only be made simpler by knowing the tricks of the trade.

FIGURE 1

The confinement template or brass slide is designed to allow you, the installer, to illuminate single objects, multiple objects and irregular shaped objects by cutting an opening in the slide. Theoretically, as long at the object is within the projected field of light, the object can be illuminated. However, there are limitations due to focusing in extreme situations. Until you get your feet wet, keep things simple. Above all, remain calm as this will be a frustrating experience the first time. After one or two, you’ll be cutting templates like a pro. So take your time, take a deep breath, have some fun and enjoy the results!

FIGURE 2a

Please refer to PROJECTOR SUPPLEMENT for selecting lenses and beam angles. The following instructions address some basics steps of the template cutting process: 1. Orientation of brass slide in the projector 2. Orientation of brass slide when cutting 3. Finding target on the wall 4. Tracing the slide 5. Establishing straight lines 6. Cut one side at a time 7. Flexing the slide 8. Filing instead of cutting 9. Wedging the slide

FIGURE 2b

ORIENTATION OF SLIDE IN THE PROJECTOR — FIGURE 1 It is absolutely critical to the adjustment process that you install the brass slide correctly into the projector each time. Remember, that all projected light is upside down and backwards. Don’t worry; I just want you to be aware of what is going on.

FIGURE 3a

Start by positioning the brass slide in the gate (between the black tapered frontal cone and the silver template ring) with the notch on the top left, facing the art on the wall. This will be your position every time you remove and reinstall the brass slide. Otherwise, you will cut the wrong side, spill the light onto the wall and have to start over. So pay attention to this detail. ORIENTATION OF BRASS SLIDE WHEN CUTTING — FIGURE 2 Remove the brass slide from the projector and rotate the brass slide clockwise without flipping the slide. The notch should now be on the bottom right hand corner. This will be your position every time you cut the brass slide. Otherwise, you will cut the wrong side, spill the light onto the wall and have to start over. So pay attention to this other important detail.

FIGURE 3b

Hint: I like to scribe on the brass slide with my scissors the letters T, L, R, and B for top, left, right and bottom around the opening. This is a good safety net and reference point when cutting. FIGURE 2b. FINDING TARGET ON THE WALL — FIGURE 3 Cutting a brass slide confinement template involves the trial and error method. That means you simply cut or punch a small hole in the brass slide to find the target and or targets on the wall. Once you have positioned the light on the art, make a few cuts to see what happens. The goal is to establish straight lines.

FIGURE 3c

Hint: This is also a good time to double check and set the focus. Double check and tighten all mounting screws. Check that the cover plate fits flush with the ceiling and does not hit the projector body or front cone. If so, you may have to reposition the projector before cutting the brass slide.

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems

FF GUIDE

FINISHING INSTRUCTIONS ENGLISH INSTRUCTIONS

Aluminum Mounting Flange

READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE. This fixture is intended for installation in accordance with National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding. Retain these instructions for maintenance reference.

Stud or Wood Block

Floated Area

FLOATING Apply first pass of drywall mud using only the edge of aluminum ceiling plate out from the panel approximately 8”-12”. Floated Area

Note: Do not apply drywall mud or tape on surface of ceiling plate.

We would suggest an 8”-12” floated area for smooth ceiling finish.

8”-12”

8”-12”

Apply a second pass of drywall mud and gradually taper edge using a large drywall mud knife. Sand smooth, apply texture, paint or wallpaper.

PAINTING AND FINISHING Apply primer coat on all exposed metal areas of

Smooth Tapered Edge

Primed Metal Surface

ceiling plate before painting. Recessed Groove

Remove glare sheild and center panel from finished ceiling plate and paint separately.

FLOAT FINISH INSTRUCTIONS - ENGLISH

19

FLOAT FINISH INSTRUCTIONS - SPANISH

20

Center Panel Glare Sheild (Optional)

Check edge of panel and ceiling plate and carefully remove any excess paint buildup using a sharp knife. Re-install center panel and optional glare shield when paint is dry.

Finished Ceiling Appearance Visible Hairline Crack

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems

GUIA FF

INSTRUCCIONES DE INSTRUCCIONES ESPAÑOL

TERMINAR

El aluminio que monta reborde

LEA Y ENTIENDA ESTOS INSTRUCCIONES ANTES DE INSTAKAR INSTALACIÓN FIJA. Esta instalación fija se inteded para la instalación de acuerdo con Código Eléctrico Nacional y para las regulaciones locales. Para asegurar la conformidad repleta con códigos y regulaciones locales, cheque con su inspector eléctrico antes de la instalación. Para prevenir el golpe eléctrico, la vuelta de la electricidad en caja de fusibles antes de avanzar. Retenga estas instrucciones para la referencia de la conservación.

Tachone o el bloque de Madera

Area flotada

FLOTANDO Aplique primer capa de cemento de untas y cinta usaando solamente la orilla bicelada del plato de aluminio del techo. Nota: No appliqué cemento de juntas ni cinta sobre

Area flotada

8”-12”

8”-12”

Sugerimos un 8”-12” flotó área para el fin liso de techo

la superficie mas alta del plato de techo. Aplique la segunda capa de cemento de juntas y gradualmente disminuya la orilla usando una spatula ancha. Arena, suaviza, aplica la textura, la pintura o el papel pintado.

PINTURA Y TERMINAR Aplique el abrigo más estirado en todas áreas

superficie más estirada de metal

la orilla estrechada liso

expuestas de metal de plato de techo antes de pintar. Quite

Ranura de Recessed

deslumbre

el

protector

y

el

entrepaño

entrepaño central

central del plato de techo ya instalado y pinte

Deslumbre el protector

separadamente. Verifique la orilla del plato de techo y quite con cuidado cualquier aumento de pintura de exceso

apariencia terminada de techo grieta fina

que utiliza un cuchillo agudo. Vuelva a instalar entrepaño central y opcional deslumbra el protector cuando pintura esta seca.

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems

ORDERING INFORMATION DATE

P.O.#

JOB NAME SHIP TO:

BILL TO:

COMPANY NAME

COMPANY NAME

ATTENTION

ATTENTION

ADDRESS

ADDRESS

CITY/STATE/ZIP

CITY/STATE/ZIP

PHONE

PHONE

AGENT

SPECIFIED BY

SHIPPING METHOD

…GROUND

…2ND DAY

…OVERNIGHT

…OTHER

SPECIAL INSTRUCTIONS

CONTOUR PROJECTOR ORDER FORM

QUANTITY

HOUSING

TEMPLATE

TRANSFORMER

OPTIONS

MOUNT

COLOR

CONTOUR PROJECTOR ORDER CODES

QTY.

HOUSING ORDER CODE RM - REMODELER FF - FLOAT FINISH TA - TOP ACCESS NC - NEW CONSTRUCTION SM - SURFACE MOUNT

TEMPLATE ORDER CODE 1 - SHUTTERS 2 - METAL SLIDE 3 - METAL GOBO 4 - GLASS GOBO

TRANSFORMER ORDER CODE 1 - ELECTRONIC 120V 2 - ELECTRONIC 277V 3 - MAGNETIC 120V 4 - MAGNETIC 277V

OPTIONS ORDER CODE 1 - NONE 2 - UV FILTER 3 - 150FL LENSES 4 - PINHOLE COVER

MOUNT ORDER CODE

COLOR ORDER CODE

R - RECESSED S - STANDARD CANOPY* L - LOW PROFILE CANOPY*

W - WHITE U - UNFINISHED W - MATTE WHITE* B - MATTE BLACK*

* SURFACE MOUNT ONLY

* SURFACE MOUNT ONLY

PROJECTOR ORDER FORM 21

E-MAIL YOUR COMPLETED ORDER FORM TO SALES@PHANTOMLIGHTING.COM FOR PRICING.

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems

OUR OTHER PRODUCTS

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


FF SERIES FLOAT FINISH HOUSING CONTOUR PROJECTOR FLOAT FINISH HOUSING The Phantom Contour Projector FF Series (float finish or zero sight line) housing is used for custom applications when attic access may not be available but primarily when a visible cover plate would be inappropriate for the ceiling finish. The result is an inconspicuous penetration of the ceiling that is virtually invisible once installed and the float ring is finished and painted to match the ceiling. Phantom Contour Projectors are designed by a professional installer and have been engineered so a novice, do it yourselfer or qualified electrican can successfully perform a successful lighting installation. The patented mounting method, simplified optical system and the ability to use both shutters and custom templates make this one of the most versatile and awesome low voltage art lighting fixtures on the market today. By shaping the light to only the canvas, the art takes on a “Lighted from within” look that can only be seen to appreciate.

SPECIFICATIONS/FEATURES PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm condensing lenses and two more 39mm, 75fl focal lenses standard (150fl focal lenses, available for longer, narrower throws, are available as a special order option.) See photometric chart on back of cut sheet or projector supplement for more information regarding lens selection. LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base with average lamp life of 3500 hours and color temperature of 3000K. Lamp Code: JCR12V-75W/FO HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing is low profile and designed to accommodate the most demanding application. ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0 US U.S. PATENT #6,832,845

C

73355

ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating ring is flexible and designed for a full 360 degree rotation with four positive locking knobs to secure the projector into position. MOUNTING CRADLE: Constructed of .08 (#5052) aluminum, this universal cradle has multiple anchoring slots and a two-position pivot option for both vertical and horizontal applications up to 55 degrees. ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an electronic 120/12V step down power supply. Magnetic transformers and 277V options are available upon request. The junction box is listed for branch circuit wiring and comes equipped with a thermal protector that provides protection against over lamping and improper installation of ceiling insulation. Thermal Protector meets NEC and UL requirements. FLOAT PLATE: Constructed of .08 (#5052) aluminum, this low profile plate is designed to be floated and textured to match the ceiling and provide for access from below. CEILING PLATE: Constructed of .06 (#5052) aluminum this low profile plate has a unique tapered edge, and adjustable glare shield, and matte finish for a smooth ceiling transition.

ORDERING INFORMATION ORDERING EXAMPLE:

FLOAT FINISH HOUSING INCLUDING 75 WATT OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS, 120V ELECTRONIC TRANSFORMER, 75FL LENSES & UNFINISHED COVER PLATE

F F

1

1

1

FF HOUSING

TEMPLATE

TRANSFORMER

OPTIONS

R

U

R

U

MOUNT

COLOR

TM

TEMPLATE ORDER CODE #

DESCRIPTION

1 2 3 4

Shutters Metal Slide Metal Gobo Glass Gobo

TRANSFORMER ORDER CODE # DESCRIPTION 1 2 3 4

Electronic 120V Electronic 277V Magnetic 120V Magnetic 277V

OPTIONS ORDER CODE #

DESCRIPTION

1 2 3 4

None UV Filter 150fl Lenses Pin Hole Cover

MOUNT ORDER CODE #

DESCRIPTION

R

Recessed

COLOR ORDER CODE #

DESCRIPTION

U

Unfinished

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


DETERMINE LOCATION OF PROJECTOR IN CEILING VERTICAL AIMING AT 45o ANGLE

FORMULA

HORIZONTAL BEAM

(Standard 75fl Lenses)

D

Painting Size (60”H x 50”W @ 36” from ceiling) C

Estimate the distance from projector to the area being illuminated.

C = Distance from ceiling to top of art D = Distance from wall C + 1/2 of art height + 6 = D

ART HT.

D

ART HT.

FC

Select a slightly larger size of spot from chart above to ensure coverage.

(Example: 36” + 30” + 6” = 72” or 6’ back from wall) Your circle of light on the wall will be 63” Approximately 43 foot candles of light*

C

D

*See grey shaded area in photometrics chart

SPOT SIZE

PHOTOMETRICS STANDARD 75 FOCAL LENGTH LENSES DISTANCE TO OBJECT 2’ BEAM SPREAD

SPOT SIZE (IN.)

43o

3’ FC

SPOT SIZE (IN.)

20

456

58o

26

67o 77o

4’ FC

SPOT SIZE (IN.)

30

186

269

44

31

206

47

117

6’ FC

SPOT SIZE (IN.)

42

99

121

53

47

96

70

52

OPTIONAL 150 FOCAL LENGTH LENSES DISTANCE TO OBJECT 10’

8’ FC

SPOT SIZE (IN.)

63

43

70

71

62

55

91

30

2’

FC

SPOT SIZE (IN.)

FC

BEAM SPREAD

75

24

107

14

31o

33

106

18

120

12

102

25

128

14

156

120

14

154

8

190

SPOT SIZE (IN.)

3’

4’ FC

SPOT SIZE (IN.)

11 1850 18

840

32o

12 1300

19

9

35o

5

36o

6’ FC

SPOT SIZE (IN.)

27

200

450

30

13 1100 22

420

14 1000

384

FC

SPOT SIZE (IN.)

23

10’

8’ FC

SPOT SIZE (IN.)

FC

SPOT SIZE (IN.)

FC

38

150

53

75

67

42

150

39

120

55

55

70

34

32

135

43

100

61

50

79

31

33

129

46

91

63

49

81

30

HOUSING AND PROJECTOR DIMENSIONS HOUSING DIMENSIONS

MAGNETIC TRANSFORMER 5 3/8”

TOP VIEW

12”

12”

9”

PROJECTOR DIMENSIONS

3 1/2"

12”

18” Diameter

12”

1 1/2" - 2 1/2"

3 1/2” ELECTRONIC TRANSFORMER

8 7/8"

1 1/2"

11 1/4”

18”

TEMPLATE METHODS ADJUSTABLE SHUTTERS

METAL SLIDE

METAL GOBO

GLASS GOBO

Each Phantom Projector comes with 3 different shutter assemblies that are specially designed to compliment a particular beam configuration by adjusting the light to follow the curvature of the lens. This allows for clean, straight lines, regardless of the aiming angle.

A Metal Slide is used on custom cut templates that contour the light to multiple or irregular objects such as sculptures. To illuminate multiple objects on the same wall they must be installed in a collage format.

A Metal Gobo is used for projecting black and white images or patterns to create a theatrical effect such as clouds, leaves or structural shapes. Manufactured like a stencil, all elements of the metal gobo design must be connected with tabs to the outer ring of the gobo. Over 700 patterns are available.

A Glass Gobo is used for projecting color images, patterns or logos to create a refined and professional look. Silk Screened Glass Gobos are made on quartz glass using a unique coating silk screened onto the base from digital files. This “painted” coating allows your design to avoid “tabbing” needed in custom steel gobos.

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


NC SERIES NEW CONSTRUCTION CONTOUR PROJECTOR

HOUSING

NEW CONSTRUCTION HOUSING The Phantom Contour Projector NC Series (new construction housing) is designed for installation prior to completion of a sheetrock ceiling. Mounting bars are designed for joist spacing up to 24” wide and 10” high. The round cover plate has a unique glare shield, tapered edge and matte white finish for a smooth ceiling transition. Phantom art projector lights are designed by a professional installer and have been engineered so a novice, do it yourselfer or qualified electrican can successfully illuminate art. The patented mounting method, simplified optical system and the ability to use both shutters and custom templates make this one of the most versatile and best art lighting fixtures on the market today. By shaping the light to only the canvas, the art takes on a “Lighted from within” look that can only be seen to appreciate.

SPECIFICATIONS/FEATURES PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm condensing lenses and two more 39mm, 75fl focal lenses standard (150fl focal lenses, engineered for longer, narrower throws, are available as a special order option.) See photometric chart on back of cut sheet or projector supplement for more information regarding lens selection. LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base with average lamp life of 3500 hours and color temperature of 3000K. Lamp Code: JCR12V-75W/FO HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing is low profile and designed to accommodate the most demanding application. ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating ring is flexible and designed for a full 360 degree rotation with four positive locking knobs to secure the projector into position. C

US

ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0 U.S. PATENT #6,832,845

73355

MOUNTING CRADLE: Constructed of .08 (#5052) aluminum, this universal cradle has multiple anchoring slots and a two-position pivot option for both vertical and horizontal applications up to 55 degrees. MOUNTING BRACKETS: Constructed of 1/8” cold rolled steel, these heavy-duty bars are designed to accommodate up to 24” joist spacing. Commercial brackets are available by special order. PLASTER RING: Constructed of .05 (#5052) aluminum, this feature is designed for both drywall and plaster ceiling applications. ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an electronic 120/12V step down power supply. Magnetic transformers and 277V options are available upon request. The junction box is listed for branch circuit wiring and comes equipped with a thermal protector that provides protection against over lamping and improper installation of ceiling insulation. Thermal Protector meets NEC and UL requirements. CEILING PLATE: Constructed of .06 (#5052) aluminum this low profile plate has a unique tapered edge, and adjustable glare shield, and matte finish for a smooth ceiling transition.

ORDERING INFORMATION ORDERING EXAMPLE:

NEW CONSTRUCTION HOUSING INCLUDING 75 WATT OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS, 120V ELECTRONIC TRANSFORMER, 75FL LENSES & UNFINISHED COVER PLATE

N C

1

1

1

NC HOUSING

R

W

R TEMPLATE

TRANSFORMER

OPTIONS

MOUNT

TM

COLOR

TEMPLATE ORDER CODE #

DESCRIPTION

1 2 3 4

Shutters Metal Slide Metal Gobo Glass Gobo

TRANSFORMER ORDER CODE # DESCRIPTION 1 2 3 4

Electronic 120V Electronic 277V Magnetic 120V Magnetic 277V

OPTIONS ORDER CODE #

DESCRIPTION

1 2 3 4

None UV Filter 150fl Lenses Pin Hole Cover

MOUNT ORDER CODE #

DESCRIPTION

R

Recessed

COLOR ORDER CODE #

DESCRIPTION

W B C U

Matte White Matte Black Custom Unfinished

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


DETERMINE LOCATION OF PROJECTOR IN CEILING VERTICAL AIMING AT 45o ANGLE

FORMULA

HORIZONTAL BEAM

(Standard 75fl Lenses)

D

Painting Size (60”H x 50”W @ 36” from ceiling) C

Estimate the distance from projector to the area being illuminated.

C = Distance from ceiling to top of art D = Distance from wall C + 1/2 of art height + 6 = D

ART HT.

D

ART HT.

FC

Select a slightly larger size of spot from chart above to ensure coverage.

(Example: 36” + 30” + 6” = 72” or 6’ back from wall) Your circle of light on the wall will be 63” Approximately 43 foot candles of light*

C

D

*See grey shaded area in photometrics chart

SPOT SIZE

PHOTOMETRICS STANDARD 75 FOCAL LENGTH LENSES DISTANCE TO OBJECT 2’ BEAM SPREAD

SPOT SIZE (IN.)

43o

3’ FC

SPOT SIZE (IN.)

20

456

58o

26

67o 77o

4’ FC

SPOT SIZE (IN.)

30

186

269

44

31

206

47

117

6’ FC

SPOT SIZE (IN.)

42

99

121

53

47

96

70

52

OPTIONAL 150 FOCAL LENGTH LENSES DISTANCE TO OBJECT 10’

8’ FC

SPOT SIZE (IN.)

63

43

70

71

62

55

91

30

2’

FC

SPOT SIZE (IN.)

FC

BEAM SPREAD

75

24

107

14

31o

33

106

18

120

12

102

25

128

14

156

120

14

154

8

190

SPOT SIZE (IN.)

3’

4’ FC

SPOT SIZE (IN.)

11 1850 18

840

32o

12 1300

19

9

35o

5

36o

6’ FC

SPOT SIZE (IN.)

27

200

450

30

13 1100 22

420

14 1000

384

FC

SPOT SIZE (IN.)

23

10’

8’ FC

SPOT SIZE (IN.)

FC

SPOT SIZE (IN.)

FC

38

150

53

75

67

42

150

39

120

55

55

70

34

32

135

43

100

61

50

79

31

33

129

46

91

63

49

81

30

HOUSING AND PROJECTOR DIMENSIONS HOUSING DIMENSIONS 12"

TOP VIEW

12"

12"

PROJECTOR DIMENSIONS

MAGNETIC TRANSFORMER 5 3/8”

3 1/2"

9"

12"

1 1/2" - 2 1/2"

3 1/2” ELECTRONIC TRANSFORMER

8 7/8"

1 1/2"

13 1/8" DIA.

TEMPLATE METHODS ADJUSTABLE SHUTTERS

METAL SLIDE

METAL GOBO

GLASS GOBO

Each Phantom Projector comes with 3 different shutter assemblies that are specially designed to compliment a particular beam configuration by adjusting the light to follow the curvature of the lens. This allows for clean, straight lines, regardless of the aiming angle.

A Metal Slide is used on custom cut templates that contour the light to multiple or irregular objects such as sculptures. To illuminate multiple objects on the same wall they must be installed in a collage format.

A Metal Gobo is used for projecting black and white images or patterns to create a theatrical effect such as clouds, leaves or structural shapes. Manufactured like a stencil, all elements of the metal gobo design must be connected with tabs to the outer ring of the gobo. Over 700 patterns are available.

A Glass Gobo is used for projecting color images, patterns or logos to create a refined and professional look. Silk Screened Glass Gobos are made on quartz glass using a unique coating silk screened onto the base from digital files. This “painted” coating allows your design to avoid “tabbing” needed in custom steel gobos.

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


RM SERIES REMODELER HOUSING CONTOUR PROJECTOR REMODELER HOUSING A first in the industry, the Phantom Contour Projector RM Series (remodel housing) is specifically designed for installation between floors and with minimal disruption to the ceiling. The low profile design permits installation in existing ceilings with joists as shallow as 10 “ deep. The round cover plate has a unique glare shield, tapered edge and matte white finish for a smooth ceiling transition. Phantom recessed lighting projectors are designed by a professional installer and have been engineered so a novice, do it yourselfer or qualified electrican can successfully illuminate art. The patented mounting method, precision optical design and the ability to use both shutters and custom templates make this one of the most versatile and awesome fine art lighting fixtures manufactured on the market today. By shaping the light to only the canvas, the art takes on a “Lighted from within” look that can only be seen to appreciate.

SPECIFICATIONS/FEATURES PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm condensing lenses and two more 39mm, 75fl focal lenses standard (150fl focal lenses, engineered for longer, narrower throws, are available as a special order option.) See photometric chart on back of cut sheet or projector supplement for more information regarding lens selection. LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base with average lamp life of 3500 hours and color temperature of 3000K. Lamp Code: JCR12V-75W/FO HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing is low profile and designed to accommodate the most demanding application. ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0 US U.S. PATENT #6,832,845

C

73355

ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating ring is flexible and designed for a full 360 degree rotation with four positive locking knobs to secure the projector into position. MOUNTING FLANGE: Constructed of .08 (#5052) aluminum, this universal cradle has multiple anchoring slots and a two-position pivot option for both vertical and horizontal applications up to 55 degrees. MOUNTING CLIPS: Constructed of .08 (#5052) aluminum, these (4) snap in right angle clips are designed to support the round housing and secure the mounting flange and ceiling plate for ceilings up to 2” thick. ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an electronic 120/12V step down power supply. Magnetic transformers and 277V options are available upon request. The junction box is listed for branch circuit wiring and comes equipped with a thermal protector that provides protection against over lamping and improper installation of ceiling insulation. Thermal Protector meets NEC and UL requirements. CEILING PLATE: Constructed of .06 (#5052) aluminum this low profile plate has a unique tapered edge, and adjustable glare shield, and matte finish for a smooth ceiling transition.

ORDERING INFORMATION ORDERING EXAMPLE:

REMODELER HOUSING INCLUDING 75 WATT OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS, 120V ELECTRONIC TRANSFORMER, 75FL LENSES & UNFINISHED COVER PLATE

R M

1

1

1

RM HOUSING

R

W

R TEMPLATE

TRANSFORMER

OPTIONS

MOUNT

TM

COLOR

TEMPLATE ORDER CODE #

DESCRIPTION

1 2 3 4

Shutters Metal Slide Metal Gobo Glass Gobo

TRANSFORMER ORDER CODE # DESCRIPTION 1 2 3 4

Electronic 120V Electronic 277V Magnetic 120V Magnetic 277V

OPTIONS ORDER CODE #

DESCRIPTION

1 2 3 4

None UV Filter 150fl Lenses Pin Hole Cover

MOUNT ORDER CODE #

DESCRIPTION

R

Recessed

COLOR ORDER CODE #

DESCRIPTION

W B C

Matte White Matte Black Custom

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


DETERMINE LOCATION OF PROJECTOR IN CEILING VERTICAL AIMING AT 45o ANGLE

FORMULA

HORIZONTAL BEAM

(Standard 75fl Lenses)

D

Painting Size (60”H x 50”W @ 36” from ceiling) C

Estimate the distance from projector to the area being illuminated.

C = Distance from ceiling to top of art D = Distance from wall C + 1/2 of art height + 6 = D

ART HT.

D

ART HT.

FC

Select a slightly larger size of spot from chart above to ensure coverage.

(Example: 36” + 30” + 6” = 72” or 6’ back from wall) Your circle of light on the wall will be 63” Approximately 43 foot candles of light*

C

D

*See grey shaded area in photometrics chart

SPOT SIZE

PHOTOMETRICS STANDARD 75 FOCAL LENGTH LENSES DISTANCE TO OBJECT 2’ BEAM SPREAD

SPOT SIZE (IN.)

43o

3’ FC

SPOT SIZE (IN.)

20

456

58o

26

67o 77o

4’ FC

SPOT SIZE (IN.)

30

186

269

44

31

206

47

117

6’ FC

SPOT SIZE (IN.)

42

99

121

53

47

96

70

52

OPTIONAL 150 FOCAL LENGTH LENSES DISTANCE TO OBJECT 10’

8’ FC

SPOT SIZE (IN.)

63

43

70

71

62

55

91

30

2’

FC

SPOT SIZE (IN.)

FC

BEAM SPREAD

75

24

107

14

31o

33

106

18

120

12

102

25

128

14

156

120

14

154

8

190

SPOT SIZE (IN.)

3’

4’ FC

SPOT SIZE (IN.)

11 1850 18

840

32o

12 1300

19

9

35o

5

36o

6’ FC

SPOT SIZE (IN.)

27

200

450

30

13 1100 22

420

14 1000

384

FC

SPOT SIZE (IN.)

23

10’

8’ FC

SPOT SIZE (IN.)

FC

SPOT SIZE (IN.)

FC

38

150

53

75

67

42

150

39

120

55

55

70

34

32

135

43

100

61

50

79

31

33

129

46

91

63

49

81

30

HOUSING AND PROJECTOR DIMENSIONS HOUSING DIMENSIONS

TOP VIEW

12 1/8” 11 1/8”

11 1/8" DIA.

MAGNETIC TRANSFORMER 5 3/8”

PROJECTOR DIMENSIONS

3 1/2"

1 1/2" - 2 1/2"

3 1/2” ELECTRONIC TRANSFORMER

9 5/8"

8 7/8"

13 1/8" DIA.

1 1/2"

TEMPLATE METHODS

ADJUSTABLE SHUTTERS

METAL SLIDE

METAL GOBO

GLASS GOBO

Each Phantom Projector comes with 3 different shutter assemblies that are specially designed to compliment a particular beam configuration by adjusting the light to follow the curvature of the lens. This allows for clean, straight lines, regardless of the aiming angle.

A Metal Slide is used on custom cut templates that contour the light to multiple or irregular objects such as sculptures. To illuminate multiple objects on the same wall they must be installed in a collage format.

A Metal Gobo is used for projecting black and white images or patterns to create a theatrical effect such as clouds, leaves or structural shapes. Manufactured like a stencil, all elements of the metal gobo design must be connected with tabs to the outer ring of the gobo. Over 700 patterns are available.

A Glass Gobo is used for projecting color images, patterns or logos to create a refined and professional look. Silk Screened Glass Gobos are made on quartz glass using a unique coating silk screened onto the base from digital files. This “painted” coating allows your design to avoid “tabbing” needed in custom steel gobos.

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


SM SERIES SURFACE MOUNT CONTOUR PROJECTOR

PROJECTOR

SURFACE MOUNT PROJECTOR The Phantom Contour Projector SM Series (surface mount) is the most economical, easy to install framing projector for lighting pictures on the market today. The sleek design, precision optics and choice of adjustable shutters or custom cut template make the Phantom Contour Projector perfect for homes, offices, art galleries and fine restaurants. The projector is available with either a Standard canopy or Low Profile canopy. Custom Powdercoat finishes (Black or White) are available options in addition to the standard finish. Phantom Contour Projectors are designed by a professional installer and have been engineered so a novice, do it yourselfer or qualified electrican can successfully illuminate art. The patented mounting method, simplified optical system and the ability to use both shutters and custom templates make this one of the most versatile and easy to use lights for art gallery lighting on the market today. By shaping the light to only the canvas, the art takes on a “Lighted from within” look that can only be seen to appreciate.

SPECIFICATIONS/FEATURES PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm condensing lenses and two more 39mm, 75fl focal lenses standard (150fl focal lenses, engineered for longer, narrower throws, are available as a special order option.) See photometric chart on back of cut sheet or projector supplement for more information regarding lens selection.

C

US

ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0 U.S. PATENT #6,832,845

LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base with average lamp life of 3500 hours and color temperature of 3000K. Lamp Code: JCR12V-75W/FO MOUNTING ARM: Constructed of .08 (#5052) aluminum, this heavy duty bracket and canopy are designed for a full 358 degree rotation and features a threaded locking mechanism. For track applications the canopy can be replaced with a pendant mount track adapter.

73355

MOUNTING CANOPY: Constructed of .08 (#5052) our aluminum mounting canopies are available in two distinct profiles. The low profile canopy is designed specifically for remote transformer applications. The standard profile is designed to house the electronic transformer and box wiring.

LOW PROFILE CANOPY

TRANSFORMER: Located in the canopy the 120V step down transformer to 12V is designed for easy installation. The electronic transformer provides protection against over-lamping and short circuit conditions. 277V available by special order.

STANDARD CANOPY

ORDERING INFORMATION ORDERING EXAMPLE:

SURFACE MOUNT HOUSING INCLUDING 75 WATT OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS, 120V ELECTRONIC TRANSFORMER, 75FL LENSES & UNFINISHED COVER PLATE

TEMPLATE ORDER CODE #

DESCRIPTION

1 2 3 4

Shutters Metal Slide Metal Gobo Glass Gobo

MOUNT ORDER CODE # S L T*

DESCRIPTION Standard Canopy Low Profile Canopy Track* *Specify Manufacturer

S M

1

1

1

S

U

SM HOUSING

TEMPLATE

TRANSFORMER

OPTIONS

MOUNT

TM

COLOR

TRANSFORMER ORDER CODE # DESCRIPTION 1 2

Electronic 120V Electronic 277V

OPTIONS ORDER CODE #

DESCRIPTION

1 2 3

None UV Filter 150fl Lenses

COLOR ORDER CODE #

DESCRIPTION

W B C U

Matte White Matte Black Custom Unfinished

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


DETERMINE LOCATION OF PROJECTOR IN CEILING VERTICAL AIMING AT 45o ANGLE

FORMULA

HORIZONTAL BEAM

(Standard 75fl Lenses)

D

Painting Size (60”H x 50”W @ 36” from ceiling) C

Estimate the distance from projector to the area being illuminated.

C = Distance from ceiling to top of art D = Distance from wall C + 1/2 of art height + 6 = D

ART HT.

D

ART HT.

FC

Select a slightly larger size of spot from chart above to ensure coverage.

(Example: 36” + 30” + 6” = 72” or 6’ back from wall) Your circle of light on the wall will be 63” Approximately 43 foot candles of light*

C

D

*See grey shaded area in photometrics chart

SPOT SIZE

PHOTOMETRICS STANDARD 75 FOCAL LENGTH LENSES DISTANCE TO OBJECT 2’ BEAM SPREAD

SPOT SIZE (IN.)

43o

3’ FC

SPOT SIZE (IN.)

20

456

58o

26

67o 77o

4’ FC

SPOT SIZE (IN.)

30

186

269

44

31

206

47

117

6’ FC

SPOT SIZE (IN.)

42

99

121

53

47

96

70

52

OPTIONAL 150 FOCAL LENGTH LENSES DISTANCE TO OBJECT 10’

8’ FC

SPOT SIZE (IN.)

63

43

70

71

62

55

91

30

2’

FC

SPOT SIZE (IN.)

FC

BEAM SPREAD

75

24

107

14

31o

33

106

18

120

12

102

25

128

14

156

120

14

154

8

190

SPOT SIZE (IN.)

3’

4’ FC

SPOT SIZE (IN.)

11 1850 18

840

32o

12 1300

19

9

35o

5

36o

6’ FC

SPOT SIZE (IN.)

27

200

450

30

13 1100 22

420

14 1000

384

FC

SPOT SIZE (IN.)

23

10’

8’ FC

SPOT SIZE (IN.)

FC

SPOT SIZE (IN.)

FC

38

150

53

75

67

42

150

39

120

55

55

70

34

32

135

43

100

61

50

79

31

33

129

46

91

63

49

81

30

HOUSING AND PROJECTOR DIMENSIONS PROJECTOR DIMENSIONS

SIDE VIEW - STANDARD CANOPY

FRONT VIEW - LOW PROFILE CANOPY

5" 3 1/2"

1 1/2" - 2 1/2"

1”

7 1/2”

5 1/2”

8” 8 7/8"

1 1/2"

4" TEMPLATE METHODS ADJUSTABLE SHUTTERS

METAL SLIDE

METAL GOBO

GLASS GOBO

Each Phantom Projector comes with 3 different shutter assemblies that are specially designed to compliment a particular beam configuration by adjusting the light to follow the curvature of the lens. This allows for clean, straight lines, regardless of the aiming angle.

A Metal Slide is used on custom cut templates that contour the light to multiple or irregular objects such as sculptures. To illuminate multiple objects on the same wall they must be installed in a collage format.

A Metal Gobo is used for projecting black and white images or patterns to create a theatrical effect such as clouds, leaves or structural shapes. Manufactured like a stencil, all elements of the metal gobo design must be connected with tabs to the outer ring of the gobo. Over 700 patterns are available.

A Glass Gobo is used for projecting color images, patterns or logos to create a refined and professional look. Silk Screened Glass Gobos are made on quartz glass using a unique coating silk screened onto the base from digital files. This “painted” coating allows your design to avoid “tabbing” needed in custom steel gobos.

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


TA SERIES TOP

ACCESS

HOUSING

CONTOUR PROJECTOR DESCRIPTION The Phantom Contour Projector TA Series (top access ONLY design) is perfect for custom applications that require a smooth ceiling appearance and attic access is available. This model is used when access from below is not practical or you want to minimize the ceiling penetration and will be performing a custom cut template installation similar to the Wendel technique. Phantom Contour art projector lights are designed by a professional installer and have been engineered so a novice, do it yourselfer or qualified electrican can successfully illuminate art. The patented mounting method, simplified projector optical design and the custom cut template technique make this one of the most versatile and awesome low voltage art lighting fixtures on the market today. By shaping the light to only the canvas, the art takes on a “Lighted from within” look that can only be seen to appreciate.

SPECIFICATIONS/FEATURES PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm condensing lenses and two more 39mm, 75fl focal lenses standard (150fl focal lenses, engineered for longer, narrower throws, are available as a special order option.) See photometric chart on back of cut sheet or projector supplement for more information regarding lens selection. LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base with average lamp life of 3500 hours and color temperature of 3000K. Lamp Code: JCR12V-75W/FO HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing is low profile and designed to accommodate the most demanding application. ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0 US U.S. PATENT #6,832,845

C

73355

ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating ring is flexible and designed for a full 360 degree rotation with four positive locking knobs to secure the projector into position. MOUNTING CRADLE: Constructed of .08 (#5052) aluminum, this universal cradle has three anchoring slots and multiple pivoting positions for both vertical and horizontal applications up to 55 degrees. MOUNTING BRACKETS: Constructed of 1/8” cold rolled steel, these heavy-duty bars are designed to accommodate up to 24” joist spacing. Commercial brackets are available by special order. ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an electronic 120/12V step down power supply. Magnetic transformers and 277V options are available upon request. The junction box is listed for branch circuit wiring and comes equipped with a thermal protector that provides protection against over lamping and improper installation of ceiling insulation. Thermal Protector meets NEC and UL requirements. HEAT SHIELD: Constructed of .05 (#5052) aluminum this protective disk has two easy to remove perforated knockouts to accommodate both vertical and horizontal installations.

ORDERING INFORMATION ORDERING EXAMPLE:

TOP ACCESS HOUSING INCLUDING 75 WATT OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS, 120V ELECTRONIC TRANSFORMER, 75FL LENSES & UNFINISHED COVER PLATE

TEMPLATE ORDER CODE #

DESCRIPTION

2 3 4

Metal Slide Metal Gobo Glass Gobo

TRANSFORMER ORDER CODE # DESCRIPTION

T A

2

1

1

TA HOUSING

TEMPLATE

TRANSFORMER

OPTIONS

R

U

R

U

MOUNT

COLOR

TM

1 2 3 4

Electronic 120V Electronic 277V Magnetic 120V Magnetic 277V

OPTIONS ORDER CODE #

DESCRIPTION

1 2 3 4

None UV Filter 150fl Lenses Pin Hole Cover

MOUNT ORDER CODE #

DESCRIPTION

R

Recessed

COLOR ORDER CODE #

DESCRIPTION

U

Unfinished

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


DETERMINE LOCATION OF PROJECTOR IN CEILING VERTICAL AIMING AT 45o ANGLE

FORMULA

HORIZONTAL BEAM

(Standard 75fl Lenses)

D

Painting Size (60”H x 50”W @ 36” from ceiling) C

Estimate the distance from projector to the area being illuminated.

C = Distance from ceiling to top of art D = Distance from wall C + 1/2 of art height + 6 = D

ART HT.

D

ART HT.

FC

Select a slightly larger size of spot from chart above to ensure coverage.

(Example: 36” + 30” + 6” = 72” or 6’ back from wall) Your circle of light on the wall will be 63” Approximately 43 foot candles of light*

C

D

*See grey shaded area in photometrics chart

SPOT SIZE

PHOTOMETRICS STANDARD 75 FOCAL LENGTH LENSES DISTANCE TO OBJECT 2’ BEAM SPREAD

SPOT SIZE (IN.)

43o

3’ FC

SPOT SIZE (IN.)

20

456

58o

26

67o 77o

4’ FC

SPOT SIZE (IN.)

30

186

269

44

31

206

47

117

6’ FC

SPOT SIZE (IN.)

42

99

121

53

47

96

70

52

OPTIONAL 150 FOCAL LENGTH LENSES DISTANCE TO OBJECT 10’

8’ FC

SPOT SIZE (IN.)

63

43

70

71

62

55

91

30

2’

FC

SPOT SIZE (IN.)

FC

BEAM SPREAD

75

24

107

14

31o

33

106

18

120

12

102

25

128

14

156

120

14

154

8

190

SPOT SIZE (IN.)

3’

4’ FC

SPOT SIZE (IN.)

11 1850 18

840

32o

12 1300

19

9

35o

5

36o

6’ FC

SPOT SIZE (IN.)

27

200

450

30

13 1100 22

420

14 1000

384

FC

SPOT SIZE (IN.)

23

10’

8’ FC

SPOT SIZE (IN.)

FC

SPOT SIZE (IN.)

FC

38

150

53

75

67

42

150

39

120

55

55

70

34

32

135

43

100

61

50

79

31

33

129

46

91

63

49

81

30

HOUSING AND PROJECTOR DIMENSIONS HOUSING DIMENSIONS

12"

TOP VIEW

PROJECTOR DIMENSIONS

MAGNETIC TRANSFORMER 5 3/8”

12"

12"

3 1/2"

9"

1 1/2" - 2 1/2"

3 1/2” ELECTRONIC TRANSFORMER

12"

1 1/2"

8 7/8"

TEMPLATE METHODS METAL SLIDE

METAL GOBO

GLASS GOBO

A Metal Slide is used on custom cut templates that contour the light to multiple or irregular objects such as sculptures. To illuminate multiple objects on the same wall they must be installed in a collage format.

A Metal Gobo is used for projecting black and white images or patterns to create a theatrical effect such as clouds, leaves or structural shapes. Manufactured like a stencil, all elements of the metal gobo design must be connected with tabs to the outer ring of the gobo. Over 700 patterns are available.

A Glass Gobo is used for projecting color images, patterns or logos to create a refined and professional look. Silk Screened Glass Gobos are made on quartz glass using a unique coating silk screened onto the base from digital files. This “painted” coating allows your design to avoid “tabbing” needed in custom steel gobos.

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


PROJECTOR SUPPLEMENT INSTRUCTION SHEET

PROJECTOR SUPPLEMENT FOR PHANTOMTM CONTOUR PROJECTORS Please read all the instructions in this supplement before proceeding with the installation. This fixture is intended for installation in accordance with the National Electric Codes regulations. To prevent electric shock, turn off electricity at the fuse box before proceeding. These instructions are designed as a general overview and guide for a typical installation. Retain these instructions for future needs and maintenance reference. FOR QUESTIONS REGARDING YOUR APPLICATION CONTACT CUSTOMER SERVICE (MONDAY THRU FRIDAY 8:00 A.M. - 4:00 P.M. CST) TOLL FREE 1-800-863-1184.

EXPLODED VIEW Lamp Assembly

1

Focal Lens Clip

2

Focal Lens

3

Focal Lens Spacer

4

Focal Lens

5

Focal Cone (Towards Back)

6

Hose Clamp

7

Tapered Frontal Cone

8

Masking Ring

9

Front Condensor Retainer

10

Back Condensor Tube

11

Single Convex Condensing Lens

12

Double Convex Condensing Lens

21

19

20

18 17 16

Condensor Assembly

15

14 13

10

13

Condensor Spacer

14

Lamp Spring

15

Projector Body

16

Back Condenser Retainer

17

Optional UV Filter

18

75MR16/FO Lamp

19

Lamp Spacer

12 11

9 Focal Cone Assembly

7 6

20 Lamp Retainer Ring

8

21

Back Cap

5

4 3 2 1

C

US

ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0 U.S. PATENT #6,832,845 & OTHER US PATENTS PENDING

73355

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


ASSEMBLY INSTRUCTIONS 8 1

2

3 4

Assembly Instructions

13

11

10

12

7

14

1. 21

Place PROJECTOR BODY (15) on level surface with taped holes

facing up. 2. Install FRONT CONDENSER RETAINER (9) into PROJECTOR BODY (15) and attach using Philips flat head stainless steel screws. Note: See Template section on bottom of page 3 for correct

18 5

orientation of screws in relation to stainless steel mounting posts and 6

19

15

9

16

masking method selected.

20

3. Install MASKING RING (8) and TAPERED FRONTAL CONE (7) 1 2 3 4 5 6 7 8

Focal Lens Clip Focal Lens Focal Lens Spacer Focal Lens Focal Cone Hose Clamp Tapered Frontal Cone Masking Ring

9 10 11 12 13 14 20 21

Front Condensor Retainer Back Condensor Tube Single Convex Condensing Lens Double Convex Condensing Lens Condensor Spacer Lamp Spring Lamp Retainer Ring Back Cap

using Allen head stainless steel screws and finger tighten for shutters and/or tighten completely for custom template with Allen wrench. 4. Holding the projector in your hand with TAPERED FRONTAL CONE (7) facing downward, gently insert PLANO CONVEX CONDENSER LENS (11) with flat side towards the front of the projector against FRONT CONDENSER RETAINER (9). Do not drop the lens or lenses as

You’re Phantom™ Contour Projector has been shipped pre assembled for your convenience. Should you need to disassemble the projector for any reason, please follow these simple step by step instructions? Disassembly Instructions 1. Holding the projector in your lap or set it on a table with TAPERED FRONTAL CONE (7) facing down 2. Remove BACK CAP (21) 3. Disconnect SOCKET (not shown) from MR16 lamp (18) 4. While pressing down on lamp gently, Remove LAMP RETAINER RING (20) 5. Remove LAMP SPACER (19), LAMP (18) and LAMP SPRING (14) 6. Remove BACK CONDENSER RETAINER (16) 7. Remove BACK CONDENSER TUBE (10) 8. Remove BACK CONDENSER SPACER (13) 9. While holding lenses carefully with your fingers turn projector over and gently remove both CONDENSER LENSES (11) and (12) 10. Remove Allen head stainless steel screws from TAPERED FRONTAL CONE (7) and MASKING RING (8) 11. Remove (2-4) Philips head stainless steel screws from FRONT CONDENSER RETAINER (9)

they will break or chip. 5. Gently insert DOUBLE CONVEX CONDENSING LENS (12) against PLANO CONVEX CONDENSING LENS (11) curve to curve. Do not drop the lens or lenses as they will break or chip. 6. Insert CONDENSER SPACER (13) with pin-hole side towards LAMP (18). Align vent holes with FRONT CONDENSOR RETAINER (9) to prevent fogging of lenses. 7. Insert BACK CONDENSER TUBE (10) onto FRONT CONDENSOR RETAINER (9) 8. Insert BACK CONDENSER RETAINER (16) and turn clockwise until engaged into PROJECTOR BODY (15) 9. Insert LAMP SPRING (14), OPTIONAL UV LENS (17), MR16/FO LAMP (18), and LAMP SPACER (19) into position 10. While pressing down on MR16/FO lamp gently, install LAMP RETAINER RING (20) and turn clockwise until engaged on BACK CONDENSER RETAINER (16) 11. Connect to MR16 LAMP (19) to SOCKET (not shown) 12. Install BACK CAP (21) to PROJECTOR BODY (15)

DETERMINE LOCATION OF PROJECTOR IN CEILING VERTICAL AIMING AT 45o ANGLE

FORMULA

HORIZONTAL BEAM

(Standard 75fl Lenses)

D

Painting Size (60”H x 50”W @ 36” from ceiling) C

Estimate the distance from projector to the area being illuminated.

C = Distance from ceiling to top of art D = Distance from wall C + 1/2 of art height + 6 = D

ART HT.

D

ART HT.

FC

Select a slightly larger size of spot from chart above to ensure coverage.

(Example: 36” + 30” + 6” = 72” or 6’ back from wall) Your circle of light on the wall will be 63” Approximately 43 foot candles of light*

C

D

*See grey shaded area in photometrics chart

SPOT SIZE

PHOTOMETRICS STANDARD 75 FOCAL LENGTH LENSES DISTANCE TO OBJECT 2’ BEAM BEAM SPREAD DEGREE

SPOT SIZE (IN.)

3’ FC

SPOT SIZE (IN.)

4’ FC

SPOT SIZE (IN.)

6’ FC

SPOT SIZE (IN.)

OPTIONAL 150 FOCAL LENGTH LENSES DISTANCE TO OBJECT 10’

8’ FC

SPOT SIZE (IN.)

FC

SPOT SIZE (IN.)

2’ FC

VNB

43

o

20

456

30

186

42

99

63

43

75

24

107

14

NB

58o

26

269

44

121

53

70

71

33

106

18

120

WB

67o

31

206

47

96

62

55

102

25

128

14

156

VWB

77

o

47

117

70

52

91

30

120

14

154

8

190

BEAM BEAM SPREAD DEGREE

SPOT SIZE (IN.)

3’ FC

SPOT SIZE (IN.)

4’ FC

SPOT SIZE (IN.)

6’ FC

SPOT SIZE (IN.)

10’

8’ FC

SPOT SIZE (IN.)

FC

SPOT SIZE (IN.)

FC

VNB

31

o

11 1850 18

840

27

200

38

150

53

75

67

42

12

NB

32o

12 1300 19

450

30

150

39

120

55

55

70

34

9

WB

35o

13 1100 22

420

32

135

43

100

61

50

79

31

o

14 1000 23

384

33

129

46

91

63

49

81

30

5

VWB

36


75

NOTE: If you do not get a good focus by chart, simply reverse the cone and adjust focus.

75 75 75

75

75

75

75

CHOOSING BEAM SPREAD VERY NARROW BEAM SPREAD (VNB) Lens, wide spacer, narrow spacer, lens, focal lens clip NARROW BEAM SPREAD (NB) Lens, wide spacer, lens, focal lens clip WIDE BEAM SPREAD (WB) Lens, narrow spacer, lens, focal lens clip VERY WIDE BEAM SPREAD (VWB) Lens, lens, focal lens clip

Each kit contains one 39mm focal cone, two 75fl, 39mm focal lenses, two pvc lens spacers and one lens retainer clip. Optional 150fl, 39mm lenses are available for long throws that require a very tight field of light and sharp focus. Note: Consult factory should you need assistance selecting a beam pattern or to solve issues related to poor focus.

OPTIMIZE BEAM SPREAD When selecting a lens combination or beam spread, the objective of the installation is to cover the art with the smallest circle of light. Of course, the top corners of the art are your main concern and will dictate the field size as shown in the illustration. It is always best to test before mounting the housing if the art is available. If the art is gone or undetermined, use paper or cardboard taped to the wall to verify your selection. The optimum aiming angle is 45 degrees to the center of the art, and may be adjusted for jobsite conditions, frame shadow, or glare. See page 4 for details.

SHUTTER SPECIFICATIONS The Contour Projector Package comes with 3 different shutter assemblies. Each shutter assembly is specially designed to compliment a particular beam configuration by adjusting the light to follow the curvature of the lens. This allows for clean, straight lines, regardless of the aiming angle. Combination of different shutters can be used to handle unique situations. Note: Longhorn shutter should be used only when projector body interferes with mounting cradle on long throws, prohibiting installation or proper adjustment. NARROW BEAM

WIDE BEAM

VERY WIDE BEAM

This set of (4) shutters is used for narrow beam applications and can be identified by rounded finger tabs.

This set of (4) shutters is used for wide beam applications and can be identified by square finger tabs.

This set of (4) shutters is used for very wide beam applications and can be identified by indented and rounded finger tabs.

TEMPLATES CUSTOM TEMPLATES

FRONT VIEW

A Custom Template is used when multiple paintings are involved or a sculpture is being illuminated. If multiple paintings are being illuminated, the paintings must be on the same wall such as in a collage format. (See template instructions for cutting tips and recommendations)

L

R

B

ALLEN HEAD SCREWS

CENTER STAINLESS STEEL MOUNTING POST ON BOTTOM

FRONT VIEW

SHUTTERS L

Metal shutters are used for simple square and rectangular shaped art. Shutters should be installed between the Tapered Frontal Cone and the Template Ring and secured with Allen head screws to lock into position. (See shutter instructions for masking tips and recommendations)

R

B

ALLEN HEAD SCREWS

CENTER STAINLESS STEEL MOUNTING POST ON BOTTOM


PROJECTOR SUPPLEMENT INSTRUCTION SHEET

CHECKING FOR GLARE

CHECKING FOR FRAME SHADOW

To check varnish glare, use your projector or a bright flashlight and a second person to determine where the best location is. Sometimes the projector will be off center of art for best results from viewing angle. Depending on the position of art you may not succeed in eliminating objectional glare.

After checking for varnish glare, check to see how deep the frame is. The deeper the frame, the further the distance is between art and light to minimize the shadow. Optimum viewing angle is 45 degrees. Sometimes you may not succeed in eliminating all of the shadow.

OVERSIZED BEAM SPREAD An oversized painting can be accommodated by using 2 Contour Projectors, mounted at oblique angles. Note: For best results remove one shutter blade from each projector to allow light from both projectors to overlap and softly fade. Otherwise, a sharp image may appear on light colored objects that are undesirable.

TRANSFORMER ELECTRONIC TRANSFORMER WIRING INSTRUCTIONS

MAGNETIC TRANSFORMER WIRING INSTRUCTIONS

Hatch® electronic transformers are standard on all Phantom Contour Projectors. This transformer has a built in safety device and is designed to power down or shut off in the event of a short in the system. The BLACK and WHITE wires represent the supply voltage or input voltage to the transformer. The two RED wires represent the output voltage or 12 volt AC output going to the fixture. Other input voltages such as 220, 240 and 277 are available as an option as well as 50 Hz models available for our European customers.

The Q-Tran® magnetic transformers with built in thermal protector are optional on all Phantom Contour Projectors. This transformer has a built choke coil to reduce noise levels to about 17db which is well below audible levels of 26db. Dual input voltages of 115V and 120V for extending lamp life. The RED and WHITE wires provide 115 volts to the transformer. The BLACK and WHITE wires provide 120 volts to the transformer. The two BLUE wires represent the output voltage or 12 volt AC output going to the fixture. Other input voltages are available for 220, 240, 277 and 50 Hz models for European customers in large quantities by special order only.

MR16 LAMP The Contour Projector is designed to use a special Ushio JCR12V-75W/FO MR16 fiber optic lamp for optimal performance and light uniformity. Use of any other lamp, without the same characteristics as the Ushio, will result in unsatisfactory results. Consult the factory at 800-863-1184 for questions or to order replacement lamps.

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


TEMPLATE INSTRUCTIONS CUSTOM BRASS CONTOUR PROJECTOR

TEMPLATE

INSTRUCTIONS

Cutting brass confinement templates has always been a mystery to most people trying to install projectors and therefore left to professional installers, adding frustration and cost to the project. The Phantom Contour Projector is designed with the installer in mind and cutting confinement templates has never been easier. Sure, practice makes perfect but that can only be made simpler by knowing the tricks of the trade. The confinement template or brass slide is designed to allow you, the installer, to illuminate single objects, multiple objects and irregular shaped objects by cutting an opening in the slide. Theoretically, as long at the object is within the projected field of light, the object can be illuminated. However, there are limitations due to focusing in extreme situations. Until you get your feet wet, keep things simple. Above all, remain calm as this will be a frustrating experience the first time. After one or two, you’ll be cutting templates like a pro. So take your time, take a deep breath, have some fun and enjoy the results!

FIGURE 1

FIGURE 2a

Please refer to PROJECTOR SUPPLEMENT for selecting lenses and beam angles. The following instructions address some basics steps of the template cutting process: 1. Orientation of brass slide in the projector 2. Orientation of brass slide when cutting 3. Finding target on the wall 4. Tracing the slide 5. Establishing straight lines 6. Cut one side at a time 7. Flexing the slide 8. Filing instead of cutting 9. Wedging the slide ORIENTATION OF SLIDE IN THE PROJECTOR — FIGURE 1 It is absolutely critical to the adjustment process that you install the brass slide correctly into the projector each time. Remember, that all projected light is upside down and backwards. Don’t worry; I just want you to be aware of what is going on.

FIGURE 2b

FIGURE 3a

Start by positioning the brass slide in the gate (between the black tapered frontal cone and the silver template ring) with the notch on the top left, facing the art on the wall. This will be your position every time you remove and reinstall the brass slide. Otherwise, you will cut the wrong side, spill the light onto the wall and have to start over. So pay attention to this detail. ORIENTATION OF BRASS SLIDE WHEN CUTTING — FIGURE 2 Remove the brass slide from the projector and rotate the brass slide clockwise without flipping the slide. The notch should now be on the bottom right hand corner. This will be your position every time you cut the brass slide. Otherwise, you will cut the wrong side, spill the light onto the wall and have to start over. So pay attention to this other important detail.

FIGURE 3b

Hint: I like to scribe on the brass slide with my scissors the letters T, L, R, and B for top, left, right and bottom around the opening. This is a good safety net and reference point when cutting. FIGURE 2b. FINDING TARGET ON THE WALL — FIGURE 3 Cutting a brass slide confinement template involves the trial and error method. That means you simply cut or punch a small hole in the brass slide to find the target and or targets on the wall. Once you have positioned the light on the art, make a few cuts to see what happens. The goal is to establish straight lines.

FIGURE 3c

Hint: This is also a good time to double check and set the focus. Double check and tighten all mounting screws. Check that the cover plate fits flush with the ceiling and does not hit the projector body or front cone. If so, you may have to reposition the projector before cutting the brass slide.

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


TEMPLATE INSTRUCTIONS CUSTOM BRASS CONTOUR PROJECTOR

TEMPLATE

INSTRUCTIONS

TRACING THE SLIDE — FIGURE 4 Position your brass test slide over a new slide in the cutting position. Carefully scribe the opening shape using your scissors onto the new brass slide.

FIGURE 4

Hint: It is best to use a good flat surface such as a metal plate or piece of ceramic tile to make things easier when tracing and rubbing the brass slide. ESTABLISHING STRAIGHT LINES Reinstall the test slide into the projector and make the necessary adjustments to your new slide to fine tune the projected image and establish straight lines. This is a good time to make some big cuts with goal of covering the majority of the art with light. Take a third slide, trace your second slide and repeat as many times as necessary until you get it right.

FIGURE 5a

CUT ONE SIDE AT A TIME Finish one side before going to the next. This will ensure that you have the brass slide in the same position each time it is removed and replaced. The slide may be cocked to the left or right as you will see. Find the best position and stick with it throughout the cutting process. Hint: It is absolutely critical that you position the slide the same way each time you take it in and out and establish a reference point on the art. If it just doesn’t look right, reset the brass slide until you get it back into the reference position.

FIGURE 5b

FLEXING THE SLIDE — FIGURE 5 It is a good idea to gently rub the edge of the brass slide with your scissor handles to prevent the brass slide from becoming bent or tearing when going in and out of the projector during the cutting process. It is also possible and often necessary to manipulate the projected image by rubbing the brass slide more firmly. This is called flexing the slide. Rubbing on the side towards the art, forces the slide to bend inward, closer to the condensing lenses, which causes the projected image size to reduce. Consequently, rubbing on the back side of the brass slide, causes the slide to flex towards the focusing lenses, resulting in a slightly larger image. This is good technique to use when you have a small spill to deal with on the wall.

FIGURE 6a

Hint: Flexing the slide does change the projected image. Be careful after flexing that you do not over cut a side of the brass slide that was previously finished. This may result in having to start over. FIGURE 6b FILING INSTEAD OF CUTTING — FIGURE 6 If you plan to do this often, you may want to pick up a set of small jewelers files from your local Radio Shack. These files come in assorted shapes and are very helpful when making small adjustments or working on irregular shaped objects, such as sculptures. Some custom brass templates can only be done with jeweler’s files as it would be impossible to cut the shape with your scissors. WEDGING THE SLIDE — FIGURE 7 Once you have completed cutting the brass template, it is time to wedge it into position. This will hold the slide in the desired position and prevent the slide from rocking or moving around in the projector. Insert small wedge into template slot and press into place with a small screwdriver or tip of scissors. If this affects your projected image, it may be necessary to reposition the template and insert the wedge in a different location.

TM

Figure 7

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


FF GUIDE

FINISHING INSTRUCTIONS ENGLISH INSTRUCTIONS

Aluminum Mounting Flange

READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE. This fixture is intended for installation in accordance with National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding. Retain these instructions for maintenance reference.

Stud or Wood Block

Floated Area

FLOATING Apply first pass of drywall mud using only the edge of aluminum ceiling plate out from the panel approximately 8”-12”. Floated Area

Note: Do not apply drywall mud or tape on surface of ceiling plate.

8”-12”

We would suggest an 8”-12” floated area for smooth ceiling finish.

8”-12”

Apply a second pass of drywall mud and gradually taper edge using a large drywall mud knife. Sand smooth, apply texture, paint or wallpaper.

PAINTING AND FINISHING Apply primer coat on all exposed metal areas of

Smooth Tapered Edge

Primed Metal Surface

ceiling plate before painting. Recessed Groove

Remove glare sheild and center panel from finished ceiling plate and paint separately.

Center Panel Glare Sheild (Optional)

Check edge of panel and ceiling plate and carefully remove any excess paint buildup using a sharp knife. Re-install center panel and optional glare shield when paint is dry.

Finished Ceiling Appearance Visible Hairline Crack

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


GUIA FF

INSTRUCCIONES DE INSTRUCCIONES ESPAÑOL

TERMINAR

El aluminio que monta reborde

LEA Y ENTIENDA ESTOS INSTRUCCIONES ANTES DE INSTAKAR INSTALACIÓN FIJA. Esta instalación fija se inteded para la instalación de acuerdo con Código Eléctrico Nacional y para las regulaciones locales. Para asegurar la conformidad repleta con códigos y regulaciones locales, cheque con su inspector eléctrico antes de la instalación. Para prevenir el golpe eléctrico, la vuelta de la electricidad en caja de fusibles antes de avanzar. Retenga estas instrucciones para la referencia de la conservación.

Tachone o el bloque de Madera

Area flotada

FLOTANDO Aplique primer capa de cemento de untas y cinta usaando solamente la orilla bicelada del plato de aluminio del techo. Nota: No appliqué cemento de juntas ni cinta sobre

8”-12”

Area flotada

8”-12”

Sugerimos un 8”-12” flotó área para el fin liso de techo

la superficie mas alta del plato de techo. Aplique la segunda capa de cemento de juntas y gradualmente disminuya la orilla usando una spatula ancha. Arena, suaviza, aplica la textura, la pintura o el papel pintado.

PINTURA Y TERMINAR Aplique el abrigo más estirado en todas áreas

la orilla estrechada liso

superficie más estirada de metal

expuestas de metal de plato de techo antes de pintar. Quite

Ranura de Recessed

deslumbre

el

protector

y

el

entrepaño

entrepaño central

central del plato de techo ya instalado y pinte

Deslumbre el protector

separadamente. Verifique la orilla del plato de techo y quite con cuidado cualquier aumento de pintura de exceso que utiliza un cuchillo agudo. Vuelva a instalar

apariencia terminada de techo grieta fina

entrepaño central y opcional deslumbra el protector cuando pintura esta seca.

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


ORDERING INFORMATION DATE

P.O.#

JOB NAME SHIP TO:

BILL TO:

COMPANY NAME

COMPANY NAME

ATTENTION

ATTENTION

ADDRESS

ADDRESS

CITY/STATE/ZIP

CITY/STATE/ZIP

PHONE

PHONE

AGENT

SPECIFIED BY

SHIPPING METHOD

…GROUND

…2ND DAY

…OVERNIGHT

…OTHER

SPECIAL INSTRUCTIONS

CONTOUR PROJECTOR ORDER FORM

QUANTITY

HOUSING

TEMPLATE

TRANSFORMER

OPTIONS

MOUNT

COLOR

TRANSFORMER ORDER CODE

OPTIONS ORDER CODE

MOUNT ORDER CODE

COLOR ORDER CODE

R - RECESSED S - STANDARD CANOPY* L - LOW PROFILE CANOPY*

W - WHITE U - UNFINISHED W - MATTE WHITE* B - MATTE BLACK*

* SURFACE MOUNT ONLY

* SURFACE MOUNT ONLY

CONTOUR PROJECTOR ORDER CODES

QTY.

HOUSING ORDER CODE RM - REMODELER FF - FLOAT FINISH TA - TOP ACCESS NC - NEW CONSTRUCTION SM - SURFACE MOUNT

TEMPLATE ORDER CODE 1 - SHUTTERS 2 - METAL SLIDE 3 - METAL GOBO 4 - GLASS GOBO

1 - ELECTRONIC 120V 2 - ELECTRONIC 277V 3 - MAGNETIC 120V 4 - MAGNETIC 277V

1 - NONE 2 - UV FILTER 3 - 150FL LENSES 4 - PINHOLE COVER

E-MAIL YOUR COMPLETED ORDER FORM TO SALES@PHANTOMLIGHTING.COM FOR PRICING.

TM

607 Durham Drive | Houston, Texas 77007-5316 Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184

www.phantomlighting.com © Copyright 2013 Phantom Lighting Systems


607 Durham Drive Houston, Texas 77007-5316 Phone: 713.863.1133 Fax: 713.863.0044 Toll Free: 800.863.1184 www.phantomlighting.com


Contour projector master(1)