GREENSTAR PRIMER

GreenStar Primer is a synthetic rubber based primer designed for use with hot melt waterproofing systems.

Technical Data GreenStar Primer Base SBS Appearance Green liquid Size / Weight 25L / 23.75 kg Temperature Resistance Up to 75ºC Coverage* 4-6 m² / L Application Temperature 5ºC - 30º C Viscosity CPS @ 20ºC 150 cps Drying Time @ 20ºC** 15-30 minutes Working-Time

Application

• Surfaces should be clean, dry, and free from frost, oil and any other contaminants.

• Apply by brush or roller.

• Allow to dry before applying hot-melt waterproofing system.

* Coverage stated is approximate and dependant on porosity and type of substrate (two coats may be required on very porous substrates). ** Drying times can vary depending on temperature fluctuations.

Storage and handling

The product should be stored unopened in a dry condition at a temperature of 5ºC - 25°C. This will ensure the stated shelf-life. The adhesive will have a limited life once the container is opened. The rolls are packed individually in cardboard boxes and placed on pallets.

Temperature and timings

All information on temperature and timings represent normal working conditions and is provided as a guideline only. However, please contact Apollo for advice if you wish to operate outside of these parameters.

Key Benefits

• Safe and clean

• Fast to apply and cure

• Easy to use

• Controllable

• Economical

• Proven