Radmat Product Range 2023 by rbcmarketing

PRODUCT OFFER

2023

CONTENTS Shed Felt and Bituminous products and accessories • Shed Felt • Super Shed Felt • Shed Felt Fixing instructions • Universal Underlay • Universal Cap Sheet • SBS Torch-On • Self Adhesive Flashing Tape • Roofing Felt Adhesive • Bitumen Primer • Lap Mastic • Round Shingles • Square Shingles • Shingles Fitting Instructions • Corrugated Bitumen Sheets • Corrugated Bitumen Sheet Fixing instructions • Ridge Tiles • Edge Pieces • Corrugated Bitumen Sheet Nails

Roof Sheeting products and accessories • PVC Corrugated Sheets • Polyester Corrugated Sheets • Polycarbonate Corrugated Sheets • Corrugated Sheet Accessories • Polycarbonate Multi-Wall Sheets • Polycarbonate Multi-Wall Sheet Fixing Instructions • Polycarbonate Sheet Accessories • Polycarbonate Sheet Profiles

Volden Plasters and Fillers • Ready Mixed Tubs • Bagged Powders

Waterproofing • Flexypol One Coat

PRODUCT RANGE

SHED FELT Waterproof bituminous glass fibre membrane • Used on garden sheds, hutches & kennels • Fixed using nails and felt adhesive • Quick and easy to install (instructions on reverse) • Life expectancy 5 years

Manufactured in the UK for Radmat Building Products Ltd, Holland House Valley Way, Rockingham Road, Market Harborough, Leicestershire, LE16 7PS. Hotline number +44 (0) 1858 412109 support@rooftrade.co.uk

13 0809-CPR-21000631 EN 13707:2004+A2:2009

UK 0836-CPR-13/F049 BSEN: 13707:2113

Declaration of Performance (DOP) available at www.rooftrade.co.uk

Green Mineral

Verte Minéral

10m 1m

1.8kg

1mm -5– +50 C

-25– +60 C 3

13 0809-CPR-21000631 EN 13707:2004+A2:2009

UK 0836-CPR-13/F049 BSEN: 13707:2113

Declaration of Performance (DOP) available at www.rooftrade.co.uk

Black Mineral

Noir Minéral

10m 1m

1.8kg

1mm -5– +50 C

-25– +60 C 4

SUPER SHED FELT

10m Roll

8m Roll

High specification polyester roofing membrane for non-habitable garden buildings and huts. • Long life expectancy • Better tear resistance than traditional membranes • Quick and easy to install (fitting instructions on reverse) • Life expectancy 15 years • Available in 8m and 10m roll lengths

13 0809-CPR-21000631 EN 13707:2004+A2:2009

UK 0836-CPR-13/F049 BSEN: 13707:2113

Declaration of Performance (DOP) available at www.rooftrade.co.uk

Green Mineral

Verte Minéral

10m 1m

2kg

1.5mm -5– +50 C

-25– +60 C 5

SUPER SHED FELT High specification polyester roofing membrane for non-habitable garden buildings and huts. • Long life expectancy • Better tear resistance than traditional membranes • Quick and easy to install (fitting instructions on reverse) • Life expectancy 15 years

13 0809-CPR-21000631 EN 13707:2004+A2:2009

UK 0836-CPR-13/F049 BSEN: 13707:2113

Declaration of Performance (DOP) available at www.rooftrade.co.uk

Red Mineral

Rouge Minéral

10m 1m

2kg

1.5mm -5 – +50 C

-25– +60 C 6

SUPER SHED FELT

10m Roll

8m Roll

13 0809-CPR-21000631 EN 13707:2004+A2:2009

UK 0836-CPR-13/F049 BSEN: 13707:2113

Declaration of Performance (DOP) available at www.rooftrade.co.uk

Black Mineral

Noir Minéral

10m 1m

2kg

1.5mm -5 – +50 C

-25– +60 C 7

Fitting Instructions Required • Requis

500mm

Roofing felt adhesive

Roofing felt lap mastic

Adhésif pour membrane de toiture

Mastic pour membrane de toiture

6 50mm 50mm

1 75mm

75mm

300mm 300mm 75mm

75mm 50mm

50mm

500mm

9 5 75mm+

50mm 50mm

UNIVERSAL UNDERLAY • Suitable as an underlay for garages and outbuildings • Fixed with cold adhesive or hot bonding techniques • Used with Universal Capsheet • Can be used as preparatory layer for torch-on felt • Life expectancy 10 years

13 0809-CPR-21000631 EN 13707:2004+A2:2009 Declaration of Performance (DOP) available at www.rooftrade.co.uk

Sand Finish

Recycled Fibre

Finition Sable

Fibre Recyclée

1m 1m

1.8kg

10m 1m

-5 – +50 C

-25– +60 C 9

UNIVERSAL CAP SHEET • Suitable as a cap sheet for garages and outbuildings • Fixed with cold adhesive or hot bonding techniques • Used with Universal Underlay • Improved UV resistance • Life expectancy 10 years

13 0809-CPR-21000631 EN 13707:2004+A2:2009 Declaration of Performance (DOP) available at www.rooftrade.co.uk

Dark Grey Gris Foncé

Recycled Fibre Fibre Recyclée

1m 1m

2.9kg

10m 1m

-5 – +50 C

-25– +60 C 10

SBS TORCH-ON CAP SHEET & UNDERLAY (8m x 1m) • Torch-on membranes are rolled and applied hot, using a propane torch to heat the underside, which releases the molten bitumen to provide adhesion to a at roof • Cap Sheet and Underlay for a 2-part system • SBS modi ed bituminous membranes • Polyester reinforced for better tear resistance • Black Cap Sheet, Sand finish Underlay • Less heat required to melt SBS bitumen than APP and more flexible in a wider temperature range • 12 Year Life Expectancy • Suitable for habitable buildings

13 0809-CPR-21000631 EN 13707:2004+A2:2009

UK 0836-CPR-13/F049 BSEN: 13707:2113

Where refurbishment is required to existing flat roofs it is advisable to check with Local Authority Building Control (LABC) before commencing the work. Specifiers should check the National Federation of Roofing Contractors (NRFC) “Safe2Torch” guidance at: https://www.nfrc.co.uk/docs/default-source/health-and-safety-guidance-publications/safe2torch-guidance.pdf Remember that all construction specification and detailing must conform with UK Building Regulations.

SELF ADHESIVE FLASHING TAPE Waterproof flashing for use on roofs, porches, conservatories, around skylights and chimneys etc. Ideal for all emergency roof repairs.

100 / 150 / 200 / 250mm

3m / 10m

Terracotta

Grey

Aluminium

Preparation • Surfaces must be sound, clean, dry and free from dust. • To improve adhesion on porous, uneven surfaces and in cold or damp weather conditions, the use of a suitable bituminous flashing tape primer is recommended. • Lightly dampen porous surfaces with water before applying. Non porous surfaces should be dry. • Fill any deep hollows, depressions or cracks wider than 3mm. • During cold weather PRO Self Adhesive Flashing Tape will be easier to apply if stored in a warm place prior to use and if the surface to which it is to be applied is warmed. Do not apply to surfaces below 5oC. Application • Cut the Flashing Tape to the required length. • Remove the backing paper and lightly press into place. • Overlap by at least 25mm. • Use a wallpaper roller or similar to ensure a good even contact is made with the surface and to smooth the tape. • PRO Self Adhesive Flashing Tape can be overpainted with exterior grade paints, although slight staining may occur at the edges. • These recommendations are for guidance only as actual conditions of use may vary and are beyond our control. Storage: store in a cool dry place.

ROOFING FELT ADHESIVE (5l and 2.5l) • Cold applied bitumen adhesive • Bonds and lap seals bituminous roofing • Brush applied

ROOFING FELT ADHESIVE

• Cold applied bitumen adhesive • Bonds and lap seals bituminous roofing membranes • Brush applied

ADHÉSIF POUR MEMBRANE DE TOITURE

• Adhésif bitume appliqué à froid • Collage et jonction des membranes de toiture bitumeuses • Application à la brosse

ADHESIVO PATA MEMBRANA DE TECHADO

• Adhesivo de bitumen para aplicación en frío • Une y sella con solapamiento las membranas bituminosas para techado • Se aplica con cepillo

MEMBRANA PARA O TELHADO ADESIVA

• Adesivo de betume aplicado a frio • Liga e veda membranas betuminosas para telhado • Aplicado com trincha

5L ≤ 10m2

Solvent-based adhesive for bonding successive layers of roofing membranes and to bond overlaps on single layer installations that are nailed to timber. Ensure that all surfaces are clean, dry and free from oil, grease, dirt and organic growth. Porous surfaces should be treated with Bitumen Primer and allowed to dry thoroughly. Allow adhesive to develop a tacky surface before applying next layer. Coverage up to 1 litre per 2m² dependent on porosity of the surface. Store in dry conditions at temperatures between 8˚C and 25˚C.

PRO BITUMEN PRIMER (750ml) • Fast drying bitumen roof primer • Prepares surfaces prior to applying roofing products or flashing tape

BITUMEN PRIMER • Fast drying bitumen roof primer • Prepares surfaces, prior to applying roofing products or flashing tape

Can be used on metal, concrete, asbestos cement, slate, lightweight concrete screeds, roofing felt and asphalt. Apply by brush in one even coat. Ensure that all surfaces are clean, dry and free from oil, grease dirt and organic growth. Bitumen Primer may be applied to slightly damp surfaces but do not apply in wet weather, when rain is threatened or when poor drying conditions exist. Bitumen Primer is resistant to water within 20-30 minutes. It is essential after priming concrete or screeded surfaces the coating is completely free of solvent and therefore a safe drying time of two hours should be allowed. Coverage is approximately 6-8m2 per litre depending on the porosity of the surface.

ROOFING FELT LAP MASTIC (310ml) • Weatherproof mastic for sealing joints in roofing felt. • Compatible with bitumen products. • Remains flexible - does not harden with time.

Weatherproof mastic for sealing joints in roo ng felt.

EN Compatible with bitumen products.

ROOFING FELT LAP MASTIC

Application. Ensure that all surfaces are clean, dry and free from oil, grease, dirt and organic growth. The mastic is applied using a standard cartridge gun. Wear suitable protective gloves and eye/face protection. Safety. Not hazardous according to current CLP Regulations.

MASTIC POUR MEMBRANE DE TOITURE

Remains exible - does not harden with time. Application. Ensure that all surfaces are clean, dry and free from oil, grease, dirt and organic The mastic is applied using a standard cartridge gun. Wear suitable protective gloves and eye/face protection. Safety. Not hazardous according to current CLP Regulations. (No component of this mixture is included above the relevant concentration lev within section 3.2.1 of SDS regulation 2015/830 or EU regulation 2020/878). Ensure adequate ventilation. Avoid inhalation of high concentrations of vapours. Use personal protective equipment as required. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Volatile Organic Compound Content: 75 g/litre This material and its container must be disposed of as hazardous waste. Dispose of waste in an approved waste disposal facility. Manufactured in the UK for Radmat Building Products Ltd, Holland House, Valle Rockingham Road, Market Harborough, Leicestershire, LE16 7PS. Hotline number +44 (0) 1858 412109 support@rooftrade.co.uk EU IMPORTER: Radmat (Ireland) Limited, 3 Inns Quay, Dublin 7, Ireland

FR Mastic d'étanchéité pour joints étanches de membrane de toiture.

Compatible avec les produits bitumeux. Reste exible - Ne durcit pas dans le temps. Application. Véri er que toutes les sur faces sont propres, sèches et exemptes d'huile, de sa et de végétaux. Le mastic s'applique avec un pistolet à car touche standard. Porter des gants protecteurs et une protection des yeux et du visage approprié Sécurité. Pas dangereux selon la règlementation en cours CLP. Aucun composant de ce mélange n'est présent au-dessus des niveaux de conc pertinents détaillés dans la section 3.2.1 du règlement (UE) 2020/878 de la Com Assurer une ventilation adéquate. Eviter l'inhalation de concentrations élevées de vapeurs. Utiliser l'équipement de protection individuel requis. Éviter tout contact avec la peau, les yeux ou les vêtements. Ne pas manger, boire ou fumer en manipulant ce produit. Se laver les mains avant les pauses et à la n du travail. Teneur en composés organiques volatiles 75 g/litre Éliminer le produit et/ou son récipient comme un déchet dangereux. Déposer les déchets dans un centre de collecte agréé. Fabriqué au Royaume-Uni pour Radmat Building Products Ltd, Holland House, Rockingham Road, Market Harborough, Leicestershire, LE16 7PS Assistance téléphonique: +44 (0) 1858 412109 support@rooftrade.co.uk IMPORTATEUR UE: Radmat (Ireland) Limited, 3 Inns Quay, Dublin 7, Ireland +44 (0) 1858 455052

310ml

(No component of this mixture is included above the relevant concentration levels detailed within section 3.2.1 of SDS regulation 2015/830 or EU regulation 2020/878). Ensure adequate ventilation. Avoid inhalation of high concentrations of vapours. Use personal protective equipment as required. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Volatile Organic Compound (VOC) content: 75g/Litre

SHEETING PRODUCT RANGE

ROUND SHINGLES 100cm x 34cm • Round Shingles are designed as a roof covering for non-habitable buildings such as Garden buildings, pergolas and sheds • These waterproofing membranes are made of Oxidised Bitumen reinforced with a fibreglass carrier • There is sand below and coloured mineral granules on the upper surface • Life expectancy is 25 years • Available in Dark Grey, Green and Red

SQUARE SHINGLES 100cm x 34cm • Square Shingles are designed as a waterproof roof covering for habitable buildings • These waterproofing membranes are made of Oxidised Bitumen reinforced with a fibreglass carrier • There is sand below and coloured mineral granules on the upper surface • Life expectancy is 25 years • Available in Dark Grey, Green and Red

PROD

nes Co. UN 0DK *D]L 5 785.(<

CORRUBIT Document number :PDS-067-0 Publication Date :05th,Jan.2009

Bitumen Corrugated Sheets

Revision date : 01th,Jun.2013

Shingles fitting instructions What you will need

CORRUGATED BITUMEN SHEETS 200cm x 93cm Used for waterproo ng of pitched roofs and wall cladding Manufactured from bitumen impregnated bres Sheets can be overlapped, no need to cut Suitable for canopies, bike shelters, sheds, log stores and other structures Easy to install

TS EN 534

2000mm x 930mm CORRUGATED ROOFING SHEETS

Corrugated Sheet fixing instructions

COLOUR-MATCHED ROOF NAILS

1000mm x 450mm ROOF RIDGES T OOLS REQUIRED

PROTECTIVE GLOVES

PROTECTIVE GLASSES

SPRAY LUBRICATING OIL

COARSE TOOTH HAND SAW

POWER SAW

HAMMER

TAPE MEASURE

STRAIGHT EDGE

INS TALLAT ION

INSTALL FIRST CORRUGATED ROOFING SHEET

MEASURE ROOF

NAIL AT EVERY CORRUGATION CROWN

OVERLAP SHEETS BY MIN 2 CORRUGATIONS

INSTALL SECOND CORRUGATED ROOFING SHEET OVERLAP VERGE OVERLAP EAVES

70mm MAX

INSTALLAT ION

INSTALL FINAL CORRUGATED ROOFING SHEET

REPEAT STEPS 2-4

FOLD AND NAIL ROOF VERGES

22cm

INSTALL ROOF RIDGES

OVERLAP

COMPLETE THE INSTALLATION

NAIL EVERY 2 CORRUGATIONS

INS TA LLAT ION ON LARGER ROOFS

ROOF PITCH DETERMINES SHEET END OVERLAP

5°-10°

300mm

10°-15°

200mm

>15°

170mm

RIDGE TILES 100CM X 50CM For use with corrugated bitumen roo ng sheets

Provides excellent cover for waterproo ng

Flexible material, suitable for most roof pitch angles

COMPLETE INSTALLATION

EDGE PIECES 100cm x 33cm

For use with corrugated roofing sheets • Used to tidy the edges of pitched roofs that are covered with corrugated sheets Manufactured from bitumen impregnated bres

CORRUGATED BITUMEN SHEET NAILS Plastic capped galvanised nails to secure corrugated roo ng sheets in place safely

IMPORTANT - TO KEEP YOUR NEW ROOF WATERTIGHT AND WEATHERPROOF, ENSURE THAT YOU ALWAYS NAIL THE ROOF SHEETS THROUGH THE CROWN OF THE CORRUGATION, NEVER THROUGH THE GULLEY.

PVC CORRUGATED SHEETS - CLEAR & BRONZE 200cm x 95cm • Basic quality Polyvinyl chloride (PVC) • Combines good transparency with easy handling and great durability • Cost-effective and sturdy

POLYESTER CORRUGATED SHEETS Lightweight, glass-reinforced plastic Suitable for roof glazing, canopies etc Polyester is highly durable, translucent without causing glare Superior weather resistance UV stability also ranks above average Ages extremely well

EN 1013 2012 A1 2014 1783

POLYCARBONATE CORRUGATED SHEETS Polycarbonate is very tough and shock-resistant Practically unbreakable and easy to handle Superior weather resistance and hail-proof Co-extruded with a surface protection layer against UV radiation

EN 1013 2012 A1 2014 1783

• CORRUGATION CAPS (PACK OF 50) • Clear 'strap caps’ to cover fasteners used to hold corrugated plastic sheets in place • Provides support under the corrugation to avoid damaging the sheet

PVC FLASHING STRIP - CLEAR • Pre-formed clear PVC flashing which sits on top of corrugated PVC sheet • Used to join corrugated sheets to a wall

FLEXIBLE FOAM EAVES FILLER (PACK OF 4) • Close-cell foam to prevent dust and insects getting underneath corrugated sheets • Helps to reduce wind uplift and ‘chattering’ • Uses the same corrugation as our PVC, Polyester and Polycarbonate Sheets • Provides support for the corrugated roof sheets when installed

Installing Corrugated Pvc or Polycarbonate Sheets Page 1 of 2 C O M P O NE NTS R E Q U IR E D

2000mm x 950mm CORRUGATED PVC OR POLYCARBONATE SHEETS

950mm CORRUGATED ROOF FLASHING

950mm FOAM EAVES FILLER

SCREW SLEEVES AND CAPS

SCREWS OF SUITABLE LENGTH

POWER DRILL

TAPE MEASURE

STRAIGHT EDGE

TO O LS R E Q U IR E D

PROTECTIVE GLOVES

PROTECTIVE GLASSES

POWER SAW

SCREWDRIVER

INS TA LLATIO N

MEASURE ROOF

SCREW AT EVERY OTHER CORRUGATION CROWN

INSTALL FIRST CORRUGATED SHEET

FIX FOAM EVES FILLER BENEATH EAVES OF EVERY SHEET

INSTALL SUBSEQUENT CORRUGATED SHEETS

ALWAYS FIX THROUGH THE CROWN OF THE CORRUGATION, NEVER THE GULLEY!

OVERLAP EAVES

70mm MAX

OVERLAP SHEETS BY MINIMUM OF 2 CORRUGATIONS

Installing Corrugated Pvc or Polycarbonate Sheets Page 2 of 2

4 MEAURE AND CUT THE FINAL SHEET TO FIT THE ROOF...

...OR...

...AVOID THE NECESSITY FOR VERTICAL CUTS BY OVERLAPPING ROOF SHEETS BY MORE THAN 2 CORRUGATIONS TO EXACTLY MATCH THE ROOF DIMENSION

INSTALL CORRUGATED ROOF FLASHING

SCREW AT EVERY OTHER CORRUGATION CROWN

SEAL TO WALL WITH FLASHING TAPE OR SUITABLE SILICON SEALANT

INSTA LLATIO N O N LA R G E R R O O F S

ROOF PITCH DETERMINES SHEET END OVERLAP

5°-10°

300mm

10°-15°

200mm

>15°

170mm

POLYCARBONATE MULTI-WALL SHEET CLEAR Multi wall polycarbonate for improved insulation Ideal for glazing carports and canopies • 2000 x 1000 x 10mm • 3000 x 1000 x 10mm

EN 16153:2013

POLYCARBONATE MULTI-WALL SHEET CLEAR Multi wall polycarbonate for improved insulation Ideal for glazing carports and canopies • 2000 x 1000 x 16mm • 3000 x 1000 x 16mm

EN 16153:2013

Fixing instructions

What you will need

&/($5 3RO\FDUERQDWH 5RRȴQJ 6KHHWV

•

$/80Ζ1Ζ80

+ 3URȴOH &RQQHFWV WZR SRO\FDUERQDWH VKHHWV ȆVLGH E\ VLGHȇ $SSO\ WR WKH ORQJ VLGH

&/($5

$/80Ζ1Ζ80

& 3URȴOH 3UHYHQWV GXVW ZDWHU RU LQVHFWV IURP HQWHULQJ WKH SRO\FDUERQDWH VKHHWV $SSO\ WR WKH QDUURZ VLGH

) 3URȴOH %UHDWKHU 7D 6HFXUHV WKH HGJH RI D 8VH RQ ERWWR VKHHW WR WKH H[WHULRU UDIWHU SRO\FDUERQD

Accessories

%UHDWKHU 7DSH 8VH RQ ERWWRP HGJH RI VKHHW WR WKH H[WHULRU UDIWHU SRO\FDUERQDWH VKHHW

$OXPLQLXP 6HDOLQJ 7DSH 8VH RQ WRS HGJH RI SRO\FDUERQDWH VKHHW

)L[LQJ %XWWRQV 7RROV UHTXLUHG 7RROV UHTXLUHG /HQJWK RI VFUHZ GHSHQGHQW (OHFWULF VDZ RU KDFNVDZ &UDIW NQLIH /HQJWK RI VFUHZ GHSHQGHQW (OHFWULF VDZ RU KDFNVDZ &UDIW NQLIH RQ IUDPH VKHHW WKLFNQHVV 7DSH PHDVXUH 6FUHZV 6LOLFRQ VHDODQW 7DSH PHDVXUH 6FUHZV 6LOLFRQ VHDODQW

)ODVKLQJ 7DSH

/DEHO VLGH XS

Step by step instructions Step 1 3HHO EDFN VRPH RI WKH SURWHFWLYH ȴOP RQ ERWK VLGHV RI WKH SRO\FDUERQDWH UHYHDOLQJ DERXW PP RI WKH VKHHW HGJH DW WKH WRS DQG ERWWRP 'R QRW FRPSOHWHO\ UHPRYH WKH ȴOPV \HW WKH\ SURWHFW WKH SRO\FDUERQDWH VXUIDFH IURP GDPDJH DQG LQGLFDWH WKH VLGH GHVLJQHG WR IDFH RXWZDUG Step 2 &OHDQ DQ\ GLUW RU UHVLGXH IURP LQVLGH WKH ȵXWHV %UXVK ZLWK D VRIW FORWK EORZ WKHP RXW ZLWK FRPSUHVVHG DLU RU LQVHUW D YDFXXP FOHDQHU WRRO WR VXFN WKH PDWWHU DZD\ Step 3 $SSO\ WKH EUHDWKHU WDSH WR WKH ERWWRP RI WKH VKHHW IROGLQJ LW RYHU WKH HGJH DQG VHDOLQJ WR WKH SRO\FDUERQDWH VLGHV 7KLV VHDOV WKH SRO\FDUERQDWH LQWHULRU DOORZLQJ PRLVWXUH WR H[LW EXW EORFNLQJ GHEULV IURP JHWWLQJ LQ $SSO\ DOXPLQLXP VHDOLQJ WDSH WR WKH WRS RI WKH VKHHW IROGLQJ LW RYHU WKH HGJHV DQG VHDOLQJ 7KLV WDSH LV LPSHUPHDEOH WR ZDWHU DQG VHDOV WKH SRO\FDUERQDWH IURP PRLVWXUH DQG GHEULV

Step 4 ΖI LQVWDOOLQJ DJDLQVW D ZDOO UXQ ȵDVKLQJ WDSH DORQJ WKH ZDOO ZLWK D GHJUHH IROG WR FUHDWH DQ HGJH RU DQ Ȇ/ȇ VKDSH 5HSHDW WKLV ZKHUH WKH QHZ URRI PHHWV DQ\ ZDOO 8QGHU WKH ȵDVKLQJ WDSH XVH WKH ) SURȴOH XSVLGH GRZQ WR VHFXUH WR WKH ZDOO DQG VFUHZ WKH ȆWDLOȇ RI WKH ) WR WKH ZDOO XVLQJ DQ DSSURSULDWH VFUHZ IRU WKH VXEVWUDWH 6OLGH WKH ȴUVW VKHHW LQWR WKH ) DQG LI MRLQLQJ WR DQRWKHU VKHHW VOLGH WKH + SURȴOH RQWR WKH RWKHU VLGH DO NOT IDVWHQ WKH + SURȴOH WR WKH IUDPH 6OLGH WKH QH[W VKHHW LQWR WKH RWKHU VLGH RI WKH + DQG FRQWLQXH WR EXLOG \RXU URRI Step 5 2QFH \RX KDYH ȴQLVKHG DQG UHDFKHG WKH HQG DWWDFK WKH ȴQDO ) SURȴOH WKH ULJKW ZD\ XS WR VHDO WKH HQG DQG VFUHZ LQWR WKH ZRRGHQ IUDPH ΖI \RX DUH MRLQLQJ WKLV WR D ZDOO WKHQ UHSHDW VWHS Step 6

Step 6 6HFXUH WKH VKHHWV XVLQJ ZRRG VFUHZV LI WKH IUDPH LV ZRRGHQ DQG ȴ[LQJ EXWWRQV )ROORZ WKH LQVWUXFWLRQV RQ WKH ȴ[LQJ EXWWRQV IRU LQVWDOODWLRQ EXW UHFRPPHQGHG GLVWDQFH EHWZHHQ HDFK EXWWRQ ZRXOG EH PP DURXQG WKH SHULPHWHU DQG PP DFURVV WKH VKHHWV LQWR WKH WLPEHU IUDPH EHORZ &DUH PXVW EH WDNHQ WR HQVXUH WKDW HQRXJK VFUHZV DUH XVHG WR FRQWURO ȆZLQG XSOLIWȇ LQ H[SRVHG DUHDV 8VH D ODUJHU GULOO ELW WR FUHDWH D VOLJKWO\ RYHUVL]HG KROH ZKLFK DOORZV H[SDQVLRQ DQG FRQWUDFWLRQ DURXQG WKH VFUHZ ODWHU $YRLG LQVHUWLQJ VFUHZV FORVHU WKDQ PP IURP WKH HGJHV Step 7 $SSO\ WKH FDSSLQJ SURȴOH WR WKH HQGV Ȇ&ȇ WR WKH WRSV DQG ERWWRPV RI HDFK SRO\FDUERQDWH VKHHW 7KH & SURȴOH FDQ EH RSHQHG XS WR FRYHU WKH + SURȴOH LI \RX SUHIHU WR ȴQLVK WKH HGJH LQ RQH SLHFH 8VH 6LOLFRQH 6HDOHU RYHU WKH VFUHZ KHDGV WR HQFRXUDJH D ZDWHUWLJKW LQVWDOODWLRQ 5HPRYH WKH ȴOP FRYHULQJ WKH SRO\FDUERQDWH WZLQ ZDOO VKHHW ZKHQ FRQVWUXFWLRQ LV FRPSOHWH

•

POLYCARBONATE ACCESSORIES Breather tape • To be used at the bottom of a multi-wall sheet • Allows air to circulate but prevents ingress of dirt, insects etc. F

H C

Aluminium tape • To be used at the top of a multi-wall sheet • Prevents water getting into the sheet

Fixing Caps (pack of 50) • Suitable for use with multi-wall sheets • Covers the fixings that are used for wooden frames • Prevents water ingress

PROFILES FOR POLYCARBONATE SHEETS • ‘C’, ‘H’ and ‘F' profiles in Aluminium

• ‘C’ and ‘H’ profiles in clear polycarbonate

Ready Mixed Jointing, Filling & Finishing • Gypsum based plasterboard jointing compound • Perfect for filling and smoothing walls and ceiling and for plasterboard repairs • Easy to sand - drops heavy • Ready to use

2.5kg

5kg

15kg

25kg

Application • Trowel apply first layer - an even surface can be achieved with a skim coat not exceeding 5mm • Allow base layer to dry (approx 90-120 mins) before applying second layer • Once set hard, gently rub down using sandpaper • Brush or wipe down sanded surface to remove dust. The surface is now ready for decorating Storage Store in a clean dry area away from direct sunlight and extreme temperatures. Coverage Typical coverage is 0.7m2 per 1kg of product.

22 DoP_R23628_5063022091437_1 EN 13963:2014 - Type 3A & EN 15824:2009

DoP_R23628_5063022091437_1 BS EN 13963:2014 - Type 3A & BS EN 15824:2009

Quick Drying Ready Mixed Jointing, Filling & Finishing • Gypsum based plasterboard jointing compound • Perfect for filling and smoothing walls and ceiling and for plasterboard repairs • Easy to sand • Ready to use • Available in 10kg tubs

Application • Trowel apply first layer - an even surface can be achieved with a skim coat not exceeding 5mm • Allow base layer to dry (approx 60 mins) before applying second layer • Once set hard, gently rub down using sandpaper • Brush or wipe down sanded surface to remove dust. The surface is now ready for decorating Storage Store in a clean dry area away from direct sunlight and extreme temperatures. Coverage Typically a 10kg tub will cover 6.5m2 (at a thickness of 1mm) or 25 linear metres.

22 DoP_R23628_5063022091475_1 EN 13963:2014 - Type 3A & EN 15824:2009

DoP_R23628_5063022091475_1 BS EN 13963:2014 - Type 3A & BS EN 15824:2009

No Tape Ready Mixed Jointing, Filling & Finishing • Gypsum based with a higher polymer content for jointing without the need for scrim tape • Designed for use on areas that are more susceptible to cracking • Easy to sand • Ready to use • Available in 10kg tubs

Application • Apply with trowel or jointing knife ensuring product is fully pressed into joints • Allow base layer to dry (approx 120 mins) before applying second layer • Once set hard, gently rub down using sandpaper • Brush or wipe down sanded surface to remove dust. Apply a primer prior to decorating Storage Store in a clean dry area away from direct sunlight and extreme temperatures. Coverage Typically a 10kg tub will cover 6.5m2 (at a thickness of 1mm) or 25 linear metres.

22 DoP_R23628_5063022091482_1 EN 13963:2014 - Type 4A

DoP_R23628_5063022091482_1 BS EN 13963:2014 - Type 4A

Ready Mixed Plaster Repair • Gypsum based with high cracking resistance • Lightweight formulation for repairing plaster without the risk of slumping • Ready to use - easy to sand • Available in 1L and 2.5L tubs

2.5L

Application • Apply first layer using a filling tool. Achieve an even surface with a skim coat not exceeding 5mm • Allow base layer to dry (approx 90 to120 mins) before applying second layer • Once set hard, gently rub down using sandpaper • Brush or wipe down sanded surface to remove dust. The surface is now ready for decorating Storage Store in a clean dry area away from direct sunlight and extreme temperatures. Coverage Typical coverage is 1.12m2 per 1L of product.

22 DoP_R23628_5063022091499_1 EN 16566:2014

DoP_R23628_5063022091499_1 BS EN 16566:2014

Jointing, Filling & Finishing Compound • Gypsum based plasterboard jointing compound • Perfect for filling and smoothing walls and ceiling and for plasterboard repairs • Easy to sand - drops heavy • 60 minutes working time • Available in 5kg and 10kg bags

Application • Add powder to clean water (usually 10kg to 4L water) and mix until smooth and lump-free • For joints and corners use jointing tape smoothed over with a 200mm wide strip of compound • After first coat is dry (usually 120-180 minutes) a second coat can be applied • Sanding should be done when fully dry (usually overnight) and a primer or sealer applied before final decoration Storage Store in a clean dry area away from direct sunlight and extreme temperatures. Coverage At a depth of 1mm a 10kg bag will typically cover 8m2 and a 5kg bag will cover 4m2

22 DoP_R23628_5063022091529_1 EN 13963:2014 - Type 3B

DoP_R23628_5063022091529_1 BS EN 13963:2014 - Type 3B

Quick Drying Jointing, Filling & Finishing • Gypsum based plasterboard jointing compound • Perfect for filling and smoothing walls and ceiling and for plasterboard repairs • Faster drying formulation makes it perfect for repairs • 60 minutes drying time with 20 minutes working time • Available in 10kg bags

Application • Add powder to clean water (usually 10kg to 4L water) and mix until smooth and lump-free • For joints and corners use jointing tape smoothed over with a 200mm wide strip of compound • After first coat is dry (usually 35-40 minutes) a second coat can be applied • Sanding should be done when fully dry (usually overnight) and a primer or sealer applied before final decoration Storage Store in a clean dry area away from direct sunlight and extreme temperatures. Coverage A 10kg bag will typically cover 8m2 at a depth of 1mm.

22 DoP_R23628_5063022091529_1 EN 13963:2014 - Type 3B

DoP_R23628_5063022091529_1 BS EN 13963:2014 - Type 3B

Quick Dry Bonding • Gypsum based bonding compound, ideal for all types of basecoat plasterwork • Perfect for filling deep cracks, chases and deep holes • Faster drying formulation • 60 minutes drying time with 30 minutes working time • Available in 25kg bags

Application • Add powder to clean water (usually 25kg to 11L water) and mix until smooth and lump-free • Application to a thickness of 11mm is recommended. If a thicker application is required, build up in a series of 8mm keyed coats • Working time of 20-30 minutes, setting time of 60 minutes, ready to skim in 75 minutes • Can be used as a one-coat if polished up, otherwise skim over Storage Store in a clean dry area away from direct sunlight and extreme temperatures. Coverage A 25kg bag will typically cover 2.75m2 to a thickness of 11mm.

22 DoP_R23628_5063022091536_1 EN 13279-1:2008

DoP_R23628_5063022091536_1 BS EN EN 13279-1:2008

Plasterboard Adhesive • For adhering plasterboard to masonry walls using the dot and dab method. • Super strong adhesion and grab • High to low suction substrates • 90 minutes drying time with 60 minutes working time • Available in 10kg bags

Application • Ensure all tools and mixing containers are clean and free from other product contaminates • Site temperature should be above 5 degrees C until fully dry • Add powder to clean water (usually 10kg to 5.5L water) and mix until smooth and lump-free • Working time is up to 65 minutes and product should be fully set before finishing (usually 90 mins) Storage Store in a clean dry area away from direct sunlight and extreme temperatures. Coverage A 10kg bag will typically cover 2.3m2 at a DAB depth of 25mm.

22 DoP_R23628_5063022091512_1 EN 14496:2006

DoP_R23628_5063022091512_1 BS EN: 13707:2113

FLEXYPOL ONE COAT WAT ERPRO O F ER

Available in 1kg, 2.5kg and 5kg cans

RoofPro Flexypol is a solvent based acrylic coating, incorporating synthetic fibres, which is designed specifically for

Flexypol

GREY

the long term maintenance of domestic and commercial roofs. It provides a tough, flexible, seamless coating with excellent crack bridging properties. • Fibre reinforced emergency roof repair compound • Instant waterproofing • Single coat application • Brush applied RoofPro Flexypol provides an effective all weather treatment for the remedial repair of leaking roofs. It can be applied in damp weather conditions where

Flexypol

BLACK

it will resist water wash-off and cure to produce a water impermeable membrane. It has excellent adhesion to a wide range of building materials, including asphalt, bitumen, concrete, brickwork, slate, metal and plastic guttering etc. Do not use on styrofoam or pvc foil, or in areas where subsequent solvent or oil contact is likely. Coverage: up to 1m2 per kg.

USE WHEN DAMP OR DRY

Brush Applied

Flexible

Bridges and fills cracks

Waterproof and weather resistant

Domestic and Commercial

CONTACTS

• Roger Hall e-mail: roger@radmat-bcp.com mobile: 07860 765869

• James Steel e -mail: jamessteel@radmat.com mobile: 07702 637299