Safety Catalog 4th Edition

SAFETY CATALOG

4TH EDITION Call 1-888-RAM-TOOL for more products

1

IN THE LAST 12 MONTHS

OVER 3,000 FREE DELIVERIES PER DAY

93.6% OF ORDERS DELIVERED IN LESS THAN 12 HOURS

OVER 658,000 PRODUCTS DELIVERED IN UNDER 5 HOURS

OVER 52,000 DIFFERENT JOB SITES

98.7% ORDER ACCURACY

OVER 1,900,000 LINE ITEMS SOLD

OVER 834,000 TOTAL ORDERS

99.2% INVOICE ACCURACY

OVER 260,000 HARD TO SOURCE MATERIALS

OVER 700,000 RAM TOOL TRUCK DELIVERIES

WHAT’S INSIDE >>

4

06 42 48 56 60 62 70 98 102 110

FALL PROTECTION TOOL TETHERING FIRST AID HEAT STRESS PREVENTION CONFINED SPACES JOB SITE SAFETY PPE SILICA DUST PROTECTION LADDERS AND SCAFFOLDS SAFE SPACES 5

FALL PROTECTION

FEATURED VENDORS

6

Call 1-888-RAM-TOOL for more products.

FALL PROTECTION

LEADING EDGE RETRACTABLES The ideal position of a retractable, when used as a part of a PFAS, is directly overhead.

Often, a retractable will be placed on the deck and used at foot level. Almost all retractable lifelines on the market are not allowed to be used in this manner if the worker is exposed to a leading edge hazard.

Anytime there is a potential for a lifeline to come into contact with an edge of any material during a fall, a Leading Edge SRL should be used. The ideal position for an anchor point connection to a SRL is above the back d-ring of the harness, so when the anchor point is below the back d-ring or at foot level a Leading Edge SRL is the right choice.

Rebar Hooks

Lanyards With Snap Hooks

Double Self-Retracting Lifelines

I-Beam Sliding Anchors

Horizontal Lifeline Kits

Lifelines 7

FALL PROTECTION

Fall Protection Harnesses

D-Rings

Anchor Straps With D-Rings

Cross Arm Straps

Compliance Kits

Carabiners

Vertical Lifelines

Tie Off Adapters

Self-Retracting Lifelines

Rope Grabs

Roof Anchors

Reusable Concrete Anchors

8

FALL PROTECTION

HARNESSES

STEP 1

CHOOSE A STYLE

Multi-Purpose

Work Positioning

Ladder Climbing

Confined Space

STEP 2

CHOOSE A RING TYPE

Front

Side

Shoulder

STEP 3

CHOOSE A BUCKLE TYPE

Pass Through STEP 4

CHOOSE A VENDOR 9

Quick Connect

Tongue

FALL PROTECTION

RETRACTABLES

STEP 1

CHOOSE A STYLE

Single

Double

Self-Retracting

STEP 2

CHOOSE A HOOK TYPE

Snap Hook

Forged Steel Rebar Hook

Aluminum Rebar Hook

STEP 3

CHOOSE A LENGTH

6FT

10FT

20FT

30FT

50FT

100FT

STEP 4

CHOOSE A VENDOR 10

FALL PROTECTION STEP 1

LANYARDS

CHOOSE A STYLE

Single

Double

Positioning

Adjustable

STEP 2

CHOOSE A HOOK TYPE

Snap Hook

Rebar Hook Aluminum

Rebar Hook Flat Steel

2'' Carabiner

STEP 3

CHOOSE A VENDOR

11

11

FALL PROTECTION

ANCHORS CHOOSE A STYLE

Plated Steel Roof Anchor w/ D-Ring

I-Beam Sliding Anchor

Reusable Concrete Anchor

Support. Sales. Training. safety@ramtool.com 12

FALL PROTECTION

FALL PROTECTION KITS WERNER® AERIAL KIT • Harness and lanyard in convenient toolbag •B aseWear Standard Harness with single Back D-ring and Tongue Buckle Legs • 6 foot SoftCoil Lanyard with Snap Hooks

GUARDIAN® FALL PROTECTION SACK OF SAFETY • (1) 25 foot or 50 foot vertical lifeline • (1) HUV Harness • ( 1) SOS Backpack, and a choice between type and quantity of Snappy, Temper, and Ridge-It 2 D-Ring Anchors • I deal for Fall Arrest and Restraint applications, all Sack of Safety equipment is compliant with all relevant OSHA and ANSI regulations.

3M™ PROTECTA® FALL PROTECTION COMPLIANCE KIT • Complete roofer’s fall protection system in one handy container • Reusable and extremely durable roof anchor with fasteners •L ightweight basic harness with pass-thru buckle legs and 5-point adjustment • Durable and versatile 33 ft. (10m) Protecta® self retracting lifeline • Self closing and locking Saflok™ steel carabiner

FALLTECH® ROOFER’S KIT • UniFit full body harness • 3 foot shock absorbing lanyard with integral manual rope grab • 50 foot vertical lifeline • Single-use roof anchor • 5 gallon reusable bucket

13

RELIEF HANDLE

POST-FALL ADJUSTMENT SYSTEM

WERNER Blue Armor™ harnesses are designed and manufactured for the most demanding applications and the most serious professional workers.

400lb. rated.

wernerfallprotection.com AD741 ©2019 WernerCo 12/19

HARNESSES

PROFORM™ F3 H033102 CONSTRUCTION HARNESS, QUICK CONNECT LEGS FEATURES • Built in Relief Cords provide immediate relief after a fall allowing you to reach a gravity override seated position • Lightweight, athletic design and materials deliver maximum comfort without compromising safety • Dual-Back pad system provides cooling airflow and breathability and can be repositioned after a fall to reduce pressure on the clavicle

BLUE ARMOR H132102 CONSTRUCTION (3 D RINGS) HARNESS FEATURES • Built in Relief Handles provide immediate relief after a fall arrest allowing you to reach a gravity override seated position • WebAlert™ inspectable webbing makes wear and damage visible and obvious, and with multiple impact indicators, makes inspection easier

PROFORM™ F3 H013002 STANDARD HARNESS, QUICK CONNECT LEGS FEATURES • Built in Relief Cords provide immediate relief after a fall allowing you to reach a gravity override seated position • Lightweight, athletic design and materials deliver maximum comfort without compromising safety • Dual-Back pad system provides cooling airflow and breathability and can be repositioned after a fall to reduce pressure on the clavicle

ARC FLASH H914002 HARNESS STANDARD, DIELECTRIC PASS THRU LEGS FEATURES • Meets ASTM F887 Arc Flash Requirements • Kevlar webbing and dielectric hardware design • Built in handles at seat provide immediate relief after a fall allowing you to reach a gravity override seated position • Lightweight, shoulder and back padding for all day comfort

LITEFIT H332102 CONSTRUCTION HARNESS, TONGUE BUCKLE LEGS

BASEWEAR H412002 STANDARD (1 D RING) HARNESS, UNIVERSAL

FEATURES • Built in Relief Handles provide immediate relief after a fall arrest allowing you to reach a gravity override seated position • Multiple impact indicators make inspection easier • Sliding back D-ring for adjustability • Hip D-rings for positioning applications • Slotted pass through buckles on the chest strap fastens without twisting

FEATURES • Impact Indicators and Label Protector make inspection easier • Sliding back D-ring for adjustability • Slotted pass through buckles on chest fastens without twisting • Tongue buckle legs straps, ideal when multiple workers use the same harness • Universal fit with 5-points of adjustment

SELF RETRACTABLE LIFELINES

R290006 AutoCoil 2 6ft Arc Flash Self-Retracting Lifeline

R210030 AutoCoil 2 30ft Steel Cable Self-Retracting Lifeline

R213030 AutoCoil 2 30ft Cable Self-Retracting Lifeline Aluminum

FEATURES • Meets ASTM F887 Arc Flash Requirements •M inimizes fall arrest distance to less than 24 inches when used overhead • Aramid webbing design • I mpact resistant aluminum housing with swivel top • Durable labels to aid inspection •M eets ANSI z359.14, Class A; ASTM F887; and OSHA Standards

FEATURES • AutoCoil 2 self-retracting lifelines provide safe, reliable protection for workers while also allowing for more freedom of movement around the job site • Impact resistant thermoplastic housing with swivel top and carabiner • Robust internal braking mechanism • Galvanized steel cable lifeline with swivel snap hook • Includes Impact indicator and Spring Cushion • Engraved ID tags to aid in inspection • Meets ANSI z359.14, Class B and OSHA Standards

FEATURES • AutoCoil 2 self-retracting lifelines provide safe, reliable protection for workers while also allowing for more freedom of movement around the job site • Impact resistant Aluminum housing with swivel top and carabiner • Robust internal braking mechanism • Galvanized steel cable lifeline with swivel snap hook • Includes Impact indicator and Spring Cushion • Engraved ID tags to aid in inspection • Meets ANSI z359.14, Class B and OSHA Standards

R230018 AutoCoil 2 18ft Web Self-Retracting Lifeline

R231007 AutoCoil 2 7ft Dual Leg Web Self-Retracting Lifeline

R210010 Autocoil 2 10ft Steel Cable Self-Retracting Lifeline

FEATURES • AutoCoil 2 self-retracting lifelines provide safe, reliable protection for workers while also allowing for more freedom of movement around the job site • Impact resistant Aluminum housing with swivel top and carabiner • Robust internal braking mechanism • 1 inch web lifeline with snap hook • Includes web impact indicator • Recessed labels to protect information for inspection • Meets ANSI z359.14, Class A and OSHA Standards

FEATURES • AutoCoil 2 self-retracting lifelines provide safe, reliable protection for workers while also allowing for more freedom of movement around the job site • Impact resistant aluminum alloy housing with swivel top and carabiner • Robust internal braking mechanism • 1 inch web lifeline with snap hook • Includes web impact indicator • Recessed labels to protect information for inspection • Meets ANSI z359.14, Class A and OSHA Standards

FEATURES • AutoCoil 2 self-retracting lifelines provide safe, reliable protection for workers while also allowing for more freedom of movement around the job site • Impact resistant plastic housing with swivel top and carabiner • Robust internal braking mechanism • Galvanized steel cable lifeline with swivel snap hook • Includes Impact indicator and Spring Cushion • Engraved ID tags to aid in inspection • Meets ANSI z359.14, Class A and OSHA Standards

LANYARDS

C311100 6FT DECOIL LANYARD (DCELL SHOCK PACK, 1IN WEB, SNAP HOOK)

C351100 6FT SOFTCOIL SINGLE LEG LANYARD (ENERGY ABSORBING INNER CORE, SNAP HOOK)

FEATURES • Werner DCELL Shock Pack is a deceleration device designed for controlled tearing action to reduce fall arrest forces on the user • WebAlert inspectable polyester webbing makes wear and damage visible and obvious, making inspection easier, while providing durability that will last • BigHead Safety Hook is designed to prevent false engagement when connecting to the harness

FEATURES • The Werner SofCoil lanyard specially designed inner core absorbs fall arrest energy along the entire length of the lanyard.

• Integrated impact indicator gives user clear visual warning when the lanyard has been subjected to a fall and should be removed from service

C441200 6FT DECOIL STRETCH TWINLEG LANYARD (DCELL SHOCK PACK, ELASTIC WEB, SNAP HOOK, REBAR HOOK) FEATURES • Werner DCELL Shock Pack is a deceleration device designed for controlled tearing action to reduce fall arrest forces on the user • Elastic webbing contracts lanyard length from 6ft to 4ft to reduce the hazards of tripping, dragging, and snagging • Double Locking snap hook with 3,600lb. gate strength

C191204 22IN CHAIN REBAR POSITIONING LANYARD (CHAIN, 2 SNAP HOOK, REBAR HOOK)

C911200 ARC FLASH TWINLEG LANYARD (KEVLAR WEB, SNAP HOOK, REBAR HOOK)

C811200 ARC FLASH SINGLE LEG LANYARD (KEVLAR WEB, SNAP HOOK, REBAR HOOK)

FEATURES • Recommended for work positioning and restraint applications only • Grade 80 twist links provide superior strength and durability

FEATURES • Meets ASTM F887 Arc Flash Requirements • Kevlar webbing design • Double Locking hooks with 3600lb gate strength • Meets ANSI z359.13 Standard for Energy Absorbing Lanyards

FEATURES • Meets ASTM F887 Arc Flash Requirements • Kevlar webbing design • Double Locking hooks with 3600lb gate strength • Lightweight shoulder, back, and waist padding for all day comfort • Meets ANSI z359.13 Standard for Energy Absorbing Lanyards

17

IN THE LAST 12 MONTHS

OVER 1,900,000 LINE ITEMS SOLD

LEADING EDGE APPROVED OVER STEEL BEAM, PRECAST CONCRETE AND B-DECK! Supports worker up to 400 lbs in overhead use

Minimal Clearances < 24" when used overhead

Lightweight & Rugged Design

Available in: 20', 30' and 65' Working Lengths

Meets ANSI and OSHA Standards

FOR MORE INFO, VISIT WERNERCO.COM AD754 ©2020 Werner Co.

ANCHOR CONNECTORS

A510000 REUSABLE CONCRETE ANCHOR FEATURES • Lightweight design easy to insert and remove • Drill hole of 3/4 inch with 3 inch minimum depth • Minimum 3000 psi concrete • Multi-directional use

A550000 I-BEAM SLIDING ANCHOR FEATURES • Lightweight aluminum design moves smoothly across beam • Fits beam flanges from 3-1/2 in to 14 in • Fits beams up to 1-1/4 in thick

A111006 6FT CROSS ARM STRAP (WEB, O-RING, D-RING) FEATURES • Made with durable polyester webbing • Features large O-ring and standard D-ring for pass through

A330000 STEEL D-RING ANCHORAGE CONNECTOR

A216400 STEEL BULL RING ANCHORAGE CONNECTOR

A210402 UPGEAR TEMPORARY ROOF ANCHOR ACCESSORY

FEATURES • Made with alloy and stainless steel • Minimum Breaking Strength (MBS): 5,000 lb • 2-3/8 inch D-ring • Fasten with a 5/8 inch - 11 Grade 5 steel hex head bolt and nut • Meets ANSI Z359.18 and OSHA Standards

FEATURES •Made with zinc plated steel • Minimum Breaking Strength (MBS): 5,000 lb • 2 inch connector ring • Fasten with three (3) 1/4 inch x 3 inch zinc-plated steel hex head lag screws or six (6) 16D 3 inch 8 gauge spiral nails • Meets ANSI Z359.18 and OSHA Standards

FEATURES • Steel construction is durable and weather resistant • D-ring for easy connections • Compatible with most roofs • Installs and removes quickly for reusability • Heavy duty hinge

21

Fall Clearance Calculation Chart

Fall Clearance Calculation Chart

To determine the required Fall Clearance add the appropriate factors together, this will give youTothe safe Required Distance (RD) below anchorage connection point which determine the required Fall Clearance add thethe appropriate factors together, this will for givework you the safe Required Distance below the is anchorage is to be carried out (RD) where there any riskconnection of falling.point for work which is to be carried out where there is any risk of falling.

LL Length of lanyard (e.g. 6 ft.) (1.8 m)

RD Required fall clearance distance (e.g. 17-½ ft. (5.3 m) using typical 6 ft. (1.8 m) Lanyard with 6 ft. (1.8 m) free-fall)

DD Deceleration Distance (e.g. 4 ft.) (1.2 m)

HH Height of suspended worker (e.g. 6 ft.) (1.8 m)

C Safety factor (e.g. 1-½ ft.) (0.46 m)

Nearest obstruction

= LL++ DD + C+ C RD RD = LL DD ++HH HH 1 ft.for to free-fall DD for free-fall ft. (1.8 ft. (3.6 person over 1. A dd 11. ft.Add to DD over 6 ft.over (1.86m) up m) to up 12toft.12(3.6 m)m)oror forfor person over kg) to up420 to 420 (190.5 kg) m) with m) max. free-fall for ANSI lbs. (140.6 310 lbs.310 (140.6 kg) up lbs.lbs.

(190.5 with66ft.ft.(1.8(1.8 m ) max. free-fall for & OSHA compliant lanyards.

ANSI & OSHA compliant lanyards.

1.7 ft. m) (0.52tom)DD to DD for Canadian Z259.11-05 (E6) compliant lanyard.

2. Add 2.

1.7Add ft. (0.52 for Canadian CSACSA Z259.11-05 (E6) compliant lanyard.

3.slide D-ring and harness stretchare factors are built 3. D-ring andslide harness stretch factors built into C. into wC. 4. DDinshown in e.g. assumes 4. DD show e.g. assumes maximummaximum allowableallowable amounts.amounts.

5. See 5. See User Instruction Manual for additional information.

User Instruction Manual for additional information.

3M, DBI-SALA and Protecta are trademarks of 3M. ©3M 2016.

9700606 REV B

TRUST H A S T O B E E A R N E D

Yo u c an T RUS T t he w o r l d â&#x20AC;&#x2122;s l ar g e s t independent m anuf ac t ur er f oc us ed s ol e l y o n f a ll pr o t ec t ion.

Yo u c an T RUS T i n no v a t i v e pr oduc t s cr e a t ed t o ser v ic e t h e br o ad e s t r ang e of i n di v i d ual s w or k ing a t hei g ht o r in c o nf i ned s pac e.

Yo u c an T RUS T cu s t o mer - dr i v en s ol ut i o ns d e v e loped t o so l v e t he pr oblems e n c o unt er e d on t he j ob e v er y d a y.

Yo u c an T RUS T t r aining t h a t ed uc a t e s w or k f or c e s o n t he e v er -c h anging m e t ho d s , s t and ar ds and r e gul a t i o ns t ha t g o v er n o u r i ndus t r ie s .

A D VA N C I N G FA L L P R O T E C T I O N

DIS C O V ER MO RE A B OU T B R AN DS Y OU C AN T RUS T AT 23 p u r es a f e t ygr o u p . co m

SERIES 3

SERIES 5

SKU# 37117

•

Snap-on shoulder padding for added comfort SRL connector loop keeps D-ring free Integrated personal dual SRL connector Available with ergonomic waist belt/pad (SKU# 37193)

• • •

DIABLO 2.5 SRL-LE SKU# 11106

• • • •

8’ harness mounted Leading Edge SRL Class B SRL 900 lbs. average arrest force Dual-leg unit for 100% tie-off Designed to reduce nuisance lock-ups

• • • • •

SKU# 32001

•

Compact and Lightweight personal Self-Retracting Lifeline Connects directly to structure, no anchor required Fall indicating, full 360° swivel connection point

• •

THE HTL

SKU# 10922

• • • •

SKU# 04664 • • • •

Designed specifically for Leading Edge (LE) work Integrated shock absorber Durable, non-corrosive components Carabiner included

ANGEL ANCHOR

SKU# 10540

Extremely lightweight Fits roof pitches 0/12 - sheer Easy to install Reusable

Leg padding alleviates tension and adds additional comfort Upgraded shoulder padding for superior comfort Trauma relief straps included Integrated personal dual SRL connector Available with ergonomic waist belt/pad (SKU# 37365)

HALO CABLE SRL-LE

PITCHPRO • • • •

GR6 SRL

SKU# 37301

BEAMER 2000

SKU# 00260

• • •

Non-penetrating dead-weight anchor Suitable for slopes up to 5° Accommodates SRL swivel cradle (#00380 - Not Pictured)

Accommodates two workers Built-in tensioner Swivel ends prevent tangling Available in 30’, 60’, and 100’ rope length

SKU# 00101

• • •

Durable aluminum, bronze and steel construction Overhead or foot-level use Quick and easy adjustment via ratcheting end-piece

XPLORER

ATOM XTREME

SKU# 47021

•

• •

Limited slip dorsal d-ring with integrated personal dual SRL connector Sternal and side rings for attachment Extremely lightweight with innovative, ergonomic design

•

Compact and Lightweight personal Self-Retracting Lifeline Fall Indicating Swivel Innovative micro-braking system External tail allows for easy reach when attached to a rear D-Ring

• • •

FABX2 60’ SRL Load bearing steel chassis Fall indicating hook Sealed brake module Independent brake pawls act as a “fail safe”

SKU# 32100

•

• • •

MAX 150

SKU# 32093

• • • •

FABX1LE

SKU# 32050

QUADRO

SKU# 53120

•

Most versatile Constant Rate Descender on the market Maximum all up user weight of 330lbs Sealed brake chamber

• •

Ergonomic hand grip is designed for comfort when handling or performing the function test Fall Indicating Hook Leading Edge rated to 0.005” radius Independent brake pawls act as a “fail safe”

SKU# 30800

•

• •

Horizontal Lifeline that can be used by up to 4 workers simultaneously in Fall Arrest applications Lightweight and durable Easy to install

#32209 Pictured

TR3 TRIPOD

FAB 3 WAY 60’

SKU# 32209, 32200 • • • •

32209 includes: TR3 Tripod, 3WAY 60’ SRL, mount bracket, and carrying bag 32200 Includes: TR3 Tripod and carrying bag.

Ultra lightweight, tough, and durable alloy construction Provides access and fall protection in Confined Space enviornments

ECO ANCHOR

SKU# 32131

• • •

Bi-directional rescue capability Fall arrest indicating hook Brake pawls work independently of to ensure a “fail safe” capability

SKU# 30801

• • • •

Easy to install, fills in 10 minutes Water-filled, dead weight anhcor Dimensions when full: 4’4” x 4’4” No penetrations of substrate required

QUICK-SWITCH® STARTER KIT

QUICK-SWITCH® RETRACTOR

SKU# QSSTRTKT-R

• • • • •

ANSI/ISEA 121-2018 Compliant Hands-free tool switching 100% tool connection at all times Reduce snag and swing hazards Max Tool Weight: 6lbs

SKU# RET648RPQS-R

• • • • •

ANSI/ISEA 121-2018 Compliant Use with the Quick-Switch® system Stainless steel screw-gate carabiner 48” reach 6lbs Max Tool Weight

COLD SHRINK TOOL ATTACHMENT SKU# COLDSH16X25-R

• • • • •

ANSI/ISEA 121-2018 Compliant Creates an attachment point on tools Impact and abrasion resistant Fits tool diameters: 0.55”-1.18” Other sizes available: COLDSH21X275-R, COLDSH275X3-R

*tool and tether not included

DOUBLE D- RING TOOL ATTACHMENT SKU# DBLD075100-R

• • • • • •

ANSI/ISEA 121-2018 Compliant Offset openings to fit a wide range of tool sizes Opening 1: 0.75”x0.75” Opening 2: 0.75” x 1.0” Max Tool Weight: 15lbs Other sizes available: DBLD0406-R, DBLD085115-R

SINGLE EYE TETHER CINCH LOOP SKU# TETHCNCHEY-R

• • •

SHOCK ABSORBING TETHER ANSI/ISEA 121-2018 Compliant Hands-free tool switching 100% tool connection at all times 63” reach Max Tool Weight: 30lbs

ANSI/ISEA 121-2018 Compliant Installs through hang holes or slots on tools Max Tool Weight: 10lbs

SELF CLOSING PARTS POUCH

SKU# TLPCH9X9SCL-R

SKU# BNGEXT253TLP-R

• • • • •

BUNGEE TOOL TETHER

• • • •

ANSI/ISEA 121-2018 Compliant Self-closing design prevents items from unintentional spilling Ballistic Nylon construction Fits up to 3” belts

SKU# BNGEXT1C10XT-R • • • •

ANSI/ISEA 121-2018 Compliant 56” reach Stainless steel screw-gate carabiner Max Tool Weight: 10lbs

CARABINER STYLE TOOL RETRACTOR SKU# RET552RP-R

• • • •

ANSI/ISEA 121-2018 Compliant 52” reach Nylon cord and casing Stainless steel screw-gate carabiner Max Tool Weight: 5lbs

The gear you need.

The savings you want.

Trade-in or trade-up to get rebates on high-quality 3M™ DBI-SALA® and 3M™ Protecta® Fall Protection.

We’re so confident you’ll love our fall protection products, that we’ll let you trade in your current gear and give you a rebate on new purchases. Harnesses, SRLs, lanyards and more—we’re including over

1,200 products to choose from.

If you already use 3M Fall Protection products, you can trade-up to get rebates when you upgrade on gear with more features and benefits.

It’s a great time to assess your equipment and make the switch to 3M™ DBI-SALA® and 3M™ Protecta® Fall Protection.

Calculate your rebate at

go.3M.com/FPtradein.

Anchors

3M™ DBI-SALA® Concrete D-ring Anchor 2104560 • • • • • •

Installs into 11/16 in., 18 mm or 3/4 in. concrete hole Use vertically in wall or horizontally in ceiling Install as temporary or permanent anchor Reusable D-ring assembly - extra bolts available Safe hook-up indicator Compact and lightweight design

3M™ PROTECTA® PRO™ Concrete Wedge Anchor 2190053 •

•

Installs into 3/4 in. (19mm) concrete hole Portable and reusable Compact and lightweight design High strength steel and

• •

aluminum construction Rugged and corrosion resistant materials Swiveling D-ring tie-off point

• •

3M™ DBI-SALA® Portable Guardrail Base 7900060 • • • • • • •

Galvanized guardrail base for portable guardrail system Free-standing guardrail system doesn’t require attachment to surface Built-in rail and toe board receptacles Integral rubber pad Ergonomic handles are formed into base Simple set-screw design Compact and lightweight design

3M™ DBI-SALA® 10Pack Bolt Kit 2100066 • • • • •

Replacement bolts for your existing concrete D-ring anchor Installs into 11/16 in., 18 mm or 3/4 in. concrete hole Use vertically in wall or horizontally in ceiling Install as temporary or permanent anchor Safe hook-up indicator

3M™ DBI-SALA® SecuraSpan™ Rebar/ Shear Stud HLL EndAnchor Retrofit Kit 7400053 •

• •

End-anchor retrofit kit allows SecuraSpan™ I-beam stanchion to be converted over to rebar/ shear stud Includes rebar/shear stud base, tie-back assembly, end anchor and intermediate bracket Fits rebar or shear stud 1/2 in. to 1 in. diameter (#4 to #8 rebar) and 4 in. to 12 in. center to center (10.1-30.5 cm)

3M™ PROTECTA® PRO™ Reusable Hinged Roof Anchor 2104000 • • • • • •

Installs to sloped or flat wood and metal decking roofs Fast and easy nail or screw installation - nails included Hinged design with D-ring Durable and corrosion resistant construction Compact and lightweight design Portable and reusable

29

Full Body Harnesses

3M™ DBI-SALA® ExoFit NEX™ Construction Style Positioning Harness ExoFit NEX™ harnesses are the most advanced harnesses in the industry.

They’re the culmination of our experience with ExoFit™ and ExoFit™ XP, ongoing research and the incorporation of new materials and innovative features. True to our NEX mission, we manufacture these harnesses using materials that won’t add unnecessary weight for ultimate comfort. When speed and efficiency are project requirements, ExoFit NEX™ will provide the freedom and confidence to function at your maximum potential.

Size

MFPN

Small

1113121

Medium

1113124

Large

1113127

X Large

1113130

3M™ DBI-SALA® ExoFit™ Construction Style Positioning Harness ExoFit™ is the design that changed what workers expect from a harness. It’s our original comfort fit harness, with a single piece of material that wraps around you in the shape of an X. It dons without tangling and provides comfortable security. ExoFit™ remembers your adjustments. Snap three buckles and you’re ready to work. Shoulder, hip and leg padding is built-in so it can’t slip. A breathable lining guarantees you’ll stay dry and comfortable all day.

Size

MFPN

Small

1108500

Medium

1108501

Large

1108502

X Large

1108507

3M™ Protecta® Construction Style Positioning Harness 3M™ Protecta® Construction-Style Positioning Harness with a fixed D-ring to minimize workday readjustment, and breathable Shoulder/Hip Padding. Plus, a durable and sturdy belt, Tongue-Buckle Leg Connection, Pass-Through Chest Connection, and Back and Side D-rings. Specially designed for added comfort and convenience, these harnesses are rated for 420 lbs (190 kg) total working weight.

Size

MFPN

Small

1161308

Medium/Large 1161309

30

X Large

1161310

2X Large

1161311

Self Retracting Lifelines 3M™ DBI-SALA® Smart Lock Leading Edge Self-Retracting Lifeline 3503802

3M™ DBI-SALA® NanoLok™ Twin-Leg Quick Connect Self Retracting Lifeline, Web 3101277

•

•

• •

Rugged and lightweight thermoplastic housing with built in ergonomic handle 20 ft. (6m) of 7/32” (5.5mm) galvanized steel cable lifeline Using advanced motion capture, horizontal use is designed to help reduce nuisance lockups when compared to our previous generation

Also avaliable in other lengths and cable types

3M™ DBI-SALA® NanoLok™ edge Tie-Back Quick Connect Self Retracting Lifeline - Cable 3500213 • • • •

Designed for foot-level tie-off and sharp edge applications Specifically designed for tie-back use Built-in connector for single-leg SRL direct attachment to harness 9 ft. (2.7m) lifeline with 3/16” (5mm) galvanized steel cable lifeline

•

•

Lightest ANSI certified personal SRL that allows for knee level tie-off Smart activating brake system combines ANSI Class A & B to provide fall clearance as low as 4 ft.- up to 13 ft. less than lanyards Integrated quick-mount bracket

Also Avaliable in single leg

3M™ PROTECTA® Rebel™ Self Retracting Lifeline, Web 3100425 • • • • •

Swiveling anchorage loop and carabiner 11 ft. (3.3m) 1” (2.5cm) polyester web lifeline Self-locking snap hook on lifeline Compact, lightweight design Tough and impact resistant stackable thermoplastic housing

Tie-Back also available in twin leg

Also available in other lengths

3M™ DBI-SALA® SealedBlok™ Self Retracting Lifeline, Retrieval/Bracket, Cable 3400871

3M™ PROTECTA® Rebel™ Self Retracting Lifeline, Cable 3590517

• • • •

Environmentally sealed dynamic components 3-way emergency retrieval system Integrated quick-mount bracket 85 ft. (25.5m) 3/16” (5mm) galvanized steel cable lifeline

• • • •

Rugged, lightweight thermoplastic housing Stackable housing design Built-in carrying handle Swiveling self-locking snap hook with impact indicator

Also available in other lengths

Also available in other lengths

31

Fall Protection For Tools

3M™ DBI-SALA® Hook2Loop Bungee Tool Tether 1500048 The 3M™ DBI SALA® Hook2Loop Bungee Tool Tether is a very versatile extension that can be used with virtually any tool under 15 lbs. such as spud wrenches, scaffold wrenches, adjustable wrenches, and more.

3M™ DBI-SALA® Hard Hat Tether 1500178 Our new heavy duty 3M™ DBI SALA® Hard Hat Coil Tether offers double the weight capacity. Its 4 lb. load rating allows you to confidently add hearing protection or a face shield to your hard hat.

General Safety PPE

3M™ E-A-R™ Skull Screws™ Earplugs P1301

3M™ E-A-R™ Push-Ins™ Earplugs 318-1001

•

•

• •

•

•

•

Soft, flexible foam conforms to the unique shape of each ear for comfortable noise reduction Flexible stem makes fitting easy without the need to touch the foam tip so the tips stay clean even when hands are dirty Poly bag keeps earplugs clean before use

3M™ SecureFit™ Safety Helmet, X5001VX-ANSI, White, vented

3M™ Hard Hat, White 4-Point Ratchet Suspension H-701R

• •

•

•

32

Soft foam tips feel comfortable for extended wear Push-to-fit style means no earplug roll-down is required for easy fitting Cutting-edge look and comfort may increase worker compliance in wearing hearing protection Tough look of threaded metal

Meets ANSI Z89.1.

Customize your fit with multiple levels of vertical adjustment.

Vents on sides and back are designed to allow airflow through the hard hat

•

4-point ratchet suspension allows wearer to customize height and fit Suspension sits lower on head to reduce pressure and increase security

IN THE LAST 12 MONTHS

OVER 260,000 HARD TO SOURCE MATERIALS

FALL PROTECTION

7035 - Journeyman Flex® Steel 3D Construction Belted Full Body Harness

7073B - Contractor+ 3D Construction Belted Full Body Harness

7078B - Tradesman® Plus 3D Construction Belted Full Body Harness

82710SC1 - 10’ DuraTech® Web SRL with Steel Snap Hook

72706SB1 - 6’ Mini Personal SRL with Steel Snap Hook

72706TH3 - 6’ Mini Personal SRL with Steel Rebar Hooks

• • • • • • •

Dorsal SRL attachment sleeve Exclusive aluminum camlock adjusters Visi-lock Quick Connect leg and chest buckles Forged aluminum D-rings Reinforced ergonomic waist support pad Contoured hip-to-seat leg pads Complies with ANSI Z359.11-2014

• Dyneema® web lifeline resists abrasion while providing trusted strength • Overmolded glass-filled nylon housing contributes unmatched impact resistance • Internal inertial braking system provides smooth deceleration with minimal fall forces • Integrated aluminum alloy swivel-eye helps to prevent lifeline twisting for smooth operation • Features alloy steel snap hook lifeline connector also a alloy steel anchorage carabiner • Complies with ANSI Z359.14-2014

• • • • •

Dorsal SRL attachment sleeve Breathable comfort shoulder yoke Reinforced comfort waist support pad Low-profile spring-tension adjusters Complies with ANSI Z359.11-2014

• Internal locking pawls and ViewPack® external energy absorber for even deceleration • Long-wearing Dyneema® web lifeline resists abrasion while providing trusted strength • Nylon housing provides impact resistance in most worksite conditions • Plated steel swivel-eye helps to prevent lifeline twisting and provide smooth operation • Alloy steel snap hook anchorage connector also a alloy steel dorsal connecting carabiner • Complies with ANSI Z359.14-2014

© 2020 FallTech 1306 S. Alameda St. Compton, CA 90221 800-719-4619 www.falltech.com

• • • • • •

Dorsal SRL attachment sleeve Visi-lock Quick-Connect chest buckles Tri-layer padded shoulder yoke Reinforced comfort waist support pad Low-profile spring-tension adjusters Complies with ANSI Z359.11-2014

• Internal locking pawls and ViewPack® external energy absorbers for even deceleration • Long-wearing Dyneema® web lifeline resists abrasion while providing trusted strength • Nylon housings provide impact resistance in most worksite conditions • Plated steel swivel-eyes help to prevent lifeline twisting and provide smooth operation • Alloy steel rebar hook anchorage connectors • Rebar hooks feature transverse load rated gates • Includes triple-lock alloy steel dorsal SRL slide connector • Complies with ANSI Z359.14-2014

03/2020

FALL PROTECTION

772060 - 60’ 4-Person Temporary HLL Lifeline Kit

• High-strength, durable 5/8” double braid polyester rope lifeline with steel thimble and stitched end-termination • Exclusive line tensioner assembly with integral energy absorber and anchorage-end carabiner • Includes 4 connecting rings, 2 heavy-duty pass-through anchor straps and additional thimble-end carabiner • 18” gear bag provides suitable storage and transportation of the HLL system • Meets OSHA 1926.502 regulations

8366 - Dorsal D-ring Extender with Steel Snap Hook

• Provides improved over-the-shoulder reach for ease of connecting lanyards and SRLs • Built with rugged polyester webbing and alloy steel D-ring • Includes alloy steel snap hook for harness attachment • Extender use will increase the user’s total fall clearance distance when using an energy absorbing lanyard • Complies with ANSI Z359.11-2014

77602K - Temporary Rope HLL System; 2-person with Kernmantle Rope

8259 - 6’ Internal Energy Absorbing Lanyard, Single-leg with Steel Snap Hooks

• 11/16” solid-core nylon kernmantle rope with one sewn and thimbled end-termination • Plated steel line tensioner features integrated energy absorber with carabiner • Also includes 2 6’ pass-through anchors, 2 connecting rings, additional carabiner and storage bag • Meets OSHA 1926.502 and 1910.66 regulations

• Low-profile design constructed with tubular polyester webbing • Features full-length internal energy absorber and visual fall indicator • Includes alloy steel snap hooks for harness attachment and anchorage connections • Complies with ANSI Z359.13-2013

8250 - 23” Premium Rebar Positioning Assembly with Chain and Steel Swivel Rebar Hook

7530 - 14” Trailing Beam Anchor with Dual-clamp Adjustment

• Built with heavy-duty 9/32” Grade 80 weldedlink chain • Swiveling steel rebar hook for vertical rebar connection • Swivel function provides improved hook orientation at awkward angles of vertical and horizontal movement • Includes steel clevis snap hooks for hip D-ring attachment • Rebar hook features transverse load rated gate • Complies with ANSI Z359.3-2017

© 2020 FallTech 1306 S. Alameda St. Compton, CA 90221 800-719-4619 www.falltech.com

• Aluminum crossbar and steel clamping jaws with nylon slider pads • Fits beam flanges from 3” to 14” wide and up to 1¼” thick • Dual adjusting jaws include concealed locking latches • Alloy steel D-ring remains centered on crossbar • For temporary mobile use on horizontal I-beams • Complies with ANSI Z359.18-2017

03/2020

FALL PROTECTION

824032D - 4½’ to 6’ ElasTech® Energy Absorbing Lanyard, Single-leg with SRL D-ring

826082D - 6’ ViewPack® Tie-back Energy Absorbing Lanyard, Double-leg with Steel Snap Hooks

7472 - Concrete Embed Anchor with D-ring Connection

7410 - Hinged Reusable Wood Roof Anchor

• Elastic leg construction provides variable working length from 4½’ to 6’ and helps reduce tripping hazards • Full-length internal energy absorber delivers flexible low-profile user comfort compared to traditional pack-style lanyards • Durable tubular polyester webbing throughout resists abrasion and UV degradation.

• Includes alloy steel snap hook for harness attachment and rebar hook for anchorage connection • Features integral D-ring for transitional connection to an SRL • Rebar hook features transverse load rated gate • Complies with ANSI Z359.13-2013

• Pour-in-place installation for attachment to embedded rebar • Dual-layer jacketed web for abrasion resistance and plated alloy steel D-ring • For loop-over or choke-on installation to rebar during concrete pour.

• Remove and dispose after temporary use in cured concrete • Meets OSHA 1926.502 regulations

• Constructed with jacketed double-layer polyester webbing for added strength and abrasion resistance • Tie-back D-rings for wrap-around anchoring and eliminates the need for a separate tie-off anchor point • Energy absorber features patented ViewPack® cover with inspection window • ViewPack® cover also features WrapPack label protection • Includes alloy steel snap hooks for harness attachment and D-ring anchorage connections • Double-leg design facilitates 100% tie-off • Complies with ANSI Z359.13-2013

• Hinged design conforms to flat or sloped roofs up to 12/12 pitch • Includes 16D nails for roof ridge or field installation • For temporary reusable installation on wood structures • 10” x 3” anchoring plates with 2¼” connecting D-ring • Meets OSHA 1926.502 regulations

© 2020 FallTech 1306 S. Alameda St. Compton, CA 90221 800-719-4619 www.falltech.com

7372 - Pass-through Choker Anchor with Heavy-duty Wear Pad

• 1¾” load-bearing web with 3” wide full-length wear pad for abrasion resistance • Appropriately sized alloy steel D-rings provide simple pass-through choke-on installation • May be passed-through multiple times to shorten length • Smaller D-ring facilitates connection point for SRLs and lanyards • Each D-ring termination features three individual 2” box-stitches for longer life • Meets OSHA 1926.502 regulations

8450 - Alloy Steel Connecting Carabiner

• Self-closing and double-locking gate function with 1” open capacity • One-hand operation for quick connection of fall arrest system components • For multi-purpose, multi-use applications within a wide range of connecting scenarios • 4” x 2” inside dimensions • Complies with ANSI Z359.12-2009

03/2020

FALL PROTECTION

83909TP3 - 9’ Leading Edge Personal SRL with Steel Rebar Hooks • Proprietary aluminum alloy dorsal connector provides simplified push button attachment.

• Exclusive energy absorber design with nylon fused EVA cover limits user back discomfort.

• Calibrated internal braking system delivers ideal walking speed without nuisance lock-up.

• Lightweight and impact resistant nylon polymer housing provides greater durability.

• Versatile anchorage range from overhead up to 5’ below user’s dorsal D-ring • 3/16” galvanized steel cable lifelines with plated alloy steel rebar hooks • Rebar hooks feature transverse load rated gates • Complies with ANSI Z359.14-2014

83909TP1 - 9’ Leading Edge Personal SRL with Steel Snap Hooks

• Proprietary aluminum alloy dorsal connector provides simplified push button attachment.

• Exclusive energy absorber design with nylon fused EVA cover limits user back discomfort.

• Constant-force main spring produces smooth lifeline payout and retraction.

• Calibrated internal braking system delivers ideal walking speed without nuisance lock-up.

• Lightweight and impact resistant nylon polymer housing provides greater durability.

• Versatile anchorage range from overhead up to 5’ below user’s dorsal D-ring • 3/16” galvanized steel cable lifelines with plated alloy steel snap hooks • Complies with ANSI Z359.14-2014

© 2020 FallTech 1306 S. Alameda St. Compton, CA 90221 800-719-4619 www.falltech.com

03/2020

PREMIUM FEATURES, COMFORT, AND DURABILITY WITH UNMATCHED RELIABILITY AND VALUE.

7035B

70708B

Complies with ANSI Z359.11-2014

Complies with ANSI Z359.11-2014

Available in sizes Small through 3X

Available in sizes Small/Med, Large/XL and 2X

Journeyman Flex Aluminum 3D Construction Belted • Features integral padded shoulder yoke, hip-to-seat leg and 6” waist support positioning pads to provide advanced breathable user comfort • Proprietary dorsal attachment sleeve supports effortless addition of personal SRLs • Exclusive aluminum camlock torso adjusters provide simple and secure upper-body fit

Tradesman Plus 3D Construction Belted • Features integral tri-layer padded shoulder yoke and 6” waist support positioning pad to provide breathable user comfort • Proprietary dorsal attachment sleeve supports effortless addition of personal SRLs • Plated alloy steel low-profile spring tension roller torso adjusters provide simple upper-body adjustment

DESIGNED, TESTED AND MANUFACTURED

IN THE USA 1306 S. Alameda St. Compton, CA 90221 | 800-719-4619 | www.falltech.com

CUSTOM LOGO VESTS AND HARD HATS

DEWALT’s PERFORM & PROTECT™ line of Power Tools is designed to provide a high level of one or more of the following: control, dust containment, or low vibration, without sacrificing performance.

E-CLUTCH SYSTEM® senses the motion of the tool and reduces the motor torque to a manageable level, if necessary.

LANYARD READY™ Connection option allows users to utilize a lanyard to tether the grinder to rigid structures at jobsites. *Lanyard and lanyard connection not included. Additional safety instructions included in manual.

KICKBACK BRAKE™ engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off.

Copyright ©2020 DEWALT. The following are trademarks for one or more DEWALT power tools, accessories, anchors and concrete adhesives: The yellow and black color scheme; the “D”-shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool.

JC/GDS/20-1636222

TOOL TETHERING

FEATURED VENDORS

42

Call 1-888-RAM-TOOL for more products.

TOOL TETHERING

Tool Lanyards

Cold Shrink

Safe Buckets

Small Parts Pouches

Coiled Cable Tool Lanyards

Adjustable Radio Holders

Loop Wire Tool Attachments

Drill Boots

Retractable Lanyards

Hard Hat Tethers

Tape Sleeves

Tethering Tape 43

ATTACHMENT POINTS

Many tools don’t have preexisting suitable attachment points but most tools can be made “tool lanyard” ready. These attachment point creation supplies allow the addition of attachment points to prepare tools for use with tool lanyards. Many supply options are interchangeable but provide options depending on whether the attachment point is needed temporarily, semi-permanently, or permanently.

DOUBLE DEE RINGS

COLD SHRINK

HIGH STRENGTH SHRINK LOOP

L ANYARD TAPE & D-RING WEBBING

TOOL COLL AR

GRIP FIT

SWIVEL/NON-SWIVEL TETHER CINCH LOOPS

puresafetygroup.com/stronghold info@puresafetygroup.com 800.466.6385

A D VA N C I N G

FA L L

P R O T E C T I O N

SPECIALTY ATTACHMENTS DRILL BOOT

TAPE MEASURE SLEEVE

BAR CL AMP

COLD SHRINK FOR ANGLE GRINDERS

LANYARD ATTACHMENT FOR DRILLS

TETHER LOOP ATTACHMENT - GRINDERS

72” WIRE LANYARD HEAVY DUTY ATTACHMENT - GRINDERS CINCH LOOPS

puresafetygroup.com/stronghold info@puresafetygroup.com 800.466.6385

A D VA N C I N G

FA L L

P R O T E C T I O N

TOOL LANYARDS

Tool lanyards connect your tool at a suitable attachment point to a suitable anchor point. Whether you are anchoring a light tool to your wrist, or a heavy tool to a railing, there’s a perfect option that will work for you.

BUNGEE ST YLE L ANYARDS

HEAV Y DUT Y L ANYARDS

HIGH STRENGTH TETHERS

COIL L ANYARDS

QUICK-SWITCH ® & CINCHING WRIST CUFFS

RETRACTABLE TOOLING L ANYARDS

puresafetygroup.com/stronghold info@puresafetygroup.com 800.466.6385

A D VA N C I N G

FA L L

P R O T E C T I O N

FOR

TOOLS

Tool tethering Guide How to select and attach the correct tether

Tool attachments

Tool tethers

5027E

5306

5029B

5 lbs.

5307

2 lbs.

wrist anchor attachments

hard hat tethers

5329A

15 lbs.

2 lbs.

5 lbs.

5101

2 lbs.

5032A

5102

5030A

5 lbs.

5 lbs.

15 lbs.

5330A 2 lbs.

5302 5 lbs.

5029C

5031A

15 lbs.

5310A 35 lbs.

1

5309 5 lbs.

5104 5 lbs.

open handle tools without captive eyes

5303 5 lbs.

15 lbs.

5106

5331

5 lbs.

2

5 lbs.

3

add one of these attachment d-rings

fasten any of these tethers

4

fasten any of these tethers

4

5027F 5 lbs.

5105 5 lbs.

complete tether solution

5107

5 lbs.

5

using this tool tape

1

2

common tools with captive eyes

3

fasten any of these tool attachments using choke-on connection

choke-on

complete tether solution with direct-connect

5

direct-connect

or complete tether solution with choke-on

1

common power tools

2

3

add this choke-on attachment

fasten preferred tether to choke-on attachment

4

complete tether solution

5

4

complete wrist tether solutions

5

using this tool tape

1

common hand tools used in close proximity work

2

3

add one of these attachment d-rings

fasten any of these tool attachments

choke-on

direct-connect

or

using this tool tape

For additional information and instructions on how to attach FallTech® Tool Tethers and Attachments visit our “How to Install” videos at www.falltech.com/falltechfortools

47

FIRST AID

FEATURED VENDORS

48

Call 1-888-RAM-TOOL for more products.

FIRST AID

Portable Eyewashes

Four Shelf First Aid Kits

Eye Wash Bottles / Stations

Eye Wash Station Signs

First Aid Signs

Class B First Aid Kits

Class A First Aid Kits

Basket Rescue Stretchers

Stretcher Bridle Slings

Rescue Backboards

AED Cabinets

Heat Stress First Aid Kits 49

FIRST AID

CLASS A FIRST AID KITS Features: QTY Description

Size

Packaging

1

Certi-Strips - Plastic

1” x 3”

16/unit

1

Triangular Bandage - W/Pins

40” x 40” x 56”

3/unit

1

Certi-Gauze Pads

3” x 3”

4/unit

1

663 Certi-Sporyn - Antibiotic Cream

1g

10/unit

1

675 Antiseptic BZK Towelettes

5” x 7”

10/unit

1

735 Hand Sanitizer

1g

10/unit

1

676 Eye Pads - 4 Certi-Tape - 4 Oval/Strips

8/unit

1

645 Certi-Burn Cream

1g

10/unit

1

816 Gloves - Nitrile

Large

2/pair

1

CPRotector® - Plastic Bag

5.5” sq.

1

Water Jel Burn Dressing

4” x 4”

1

Cold Pack - Certi-Cool Junior

5” x 7”

1

Eye Wash

1 oz.

1

Certi-Tape

1/2” x 2 1/2 yd.

1

Certi-Gauze Roll

2” x 6 yd.

1

Scissors - Bandage - Red Handle

4”

2

Trauma Pad - Compress

5” x 9”

1

First Aid Facts Guide Book

50

FIRST AID

CLASS B FIRST AID KITS Features: QTY Description

Size

Packaging

4

Certi-Strips - Plastic

1”x 3”

16/unit

2

636 Triangular Bandage - w/Pins

40”x 40”x 56”

3/unit

1

637 Certi-Gauze Pads

3”x 3”

4/unit

5

675 Antiseptic BZK Towelettes

5”x 7”

10/unit

1

735 Hand Sanitizer

1g

10/unit

1

652 Certi-Tape

1/2”x 2-1/2 yd.

2/unit

1

676 Eye Pads - 4 Certi-Tape - 4 Oval/Strips

8/unit

1

782 Tourniquet - Latex Free-Forceps-Scissors Assort

3/unit

2

816 Gloves - Nitrile

2/pair

Large

1

Certi-Sporyn - Antibiotic Cream

1g

25/box

1

Certi-Burn Cream

1g

25/box

1

CPRotector® - Plastic Bag

5.5” sq.

2

Cold Pack - Certi-Cool Junior

5”x 7”

2

Burn Dressing

4”x 4”

1

Eye Wash

4 oz.

2

634 Certi-Gauze Roll

2”x 6 yd.

1

635 Certi-Gauze Roll

4”x 6 yd.

4

Trauma Pad - Compress

5”x 9”

1

Sam® Splint

36”

1

First Aid Facts Guide Book

51

IN THE LAST 12 MONTHS

OVER 52,000 DIFFERENT JOB SITES

USA MANUFACTURER

FIRST AID KITS & SUPPLIES

FIRST AID

FAC-3 CLASS B FIRST AID CABINET QTY Description

Size

Packaging

QTY Description

Size

Packaging

2

Antiseptic BZK Towelettes

5”x7”

25/box

1

Certi-Sporyn - Antibiotic Cream

1g

25/box

2

Cold Pack - Certi-Cool Junior

5”x7”

1

Certi-Burn Cream

1g

25/box

1

Eye Wash

4 oz.

1

CPRotector® - Plastic Bag

5.5” sq.

1

Certi-Tape - Spool - Tri Cut

2”x5 yd.

1

HSB Bloodborne Pathogen Economy HSB

1

Certi-Stopper - XL-TD

4”x60”

1

710 Insect Sting Wipe-Ups

1”x2”

10/unit

3”

1

735 Hand Sanitizer

1g

10/unit

2

816 Gloves - Nitrile

Large

2/pair

1

634 Certi-Gauze Roll

2”x 6yd.

2/unit

1

635 Certi-Gauze Roll

4”x6 yd.

1/unit

Features:

1

Cotton Swabs

2

636 Triangular Bandage w/Pins

1

Certi-Rip Elastic Cohesive Bandage

2” x 5 yd.

1

Certi-Strips - Plastic

1”x3”

50/box

1

782 Tourniquet - Latex Free Forceps - Scissors Assortment

1

Certi-Strips - Plastic - Extra Large

2”x3”

25/box

4

Trauma Pad - Compress

5”x9”

1

Certi-Strips Heavy Weight Woven Knuckle

1

Certi-Stopper - XL-TD

4”x60”

2

Trauma Pad - Compress

5”x9”

1

Certi-Strips Heavy Weight Woven Fingertip

1

WoundSeal – Red Box Tube

2

676 Eye Pads 4 Certi-Tape - 4 Oval/Strips

1

First Aid Facts Guide Book

8/unit

1

Certi-Gauze Pads

3”x3”

25/box

1

628 Certi-Non-Stick Pad

2”x3”

4/unit

2

Burn Dressing

4”x4”

1

Sam Splint - Roll

36”

54

100/vial

40”x40”x56” 3/unit

Med

25/box 25/box

3/unit

FIRST AID

FAC-4 CLASS B FIRST AID CABINET Features:

QTY Description ing

Size

Packag-

QTY Description ing

Size

1

Certi-Strips - Plastic

1”x3”

100/box

2

Cold Pack - Certi-Cool Junior

5”x7”

1

Certi-Strips - Plastic

3/4”x3”

50/box

1

CPRotector® - Plastic Bag

5.5” sq.

1

Certi-Strips - Plastic - Extra Large

2”x3”

25/box

1

710 Insect Sting Wipe-Ups

1”x2”

10/unit

1

Certi-Strips - Heavy Weight Woven

1”x3”

50/box

1

735 Hand Sanitizer

1g

10/unit

1

Certi-Strips - Heavy Weight Woven Fingertip

2

816 Gloves - Nitrile

Large

2/pair

4

Trauma Pad - Compress

5”x9”

1

Certi-Strips Heavy Weight Woven Knuckle

50/box

2

634 Certi-Gauze Roll

2”x6yd.

2/unit

1

Certi-Gauze Pads

3”x3”

25/box

2

635 Certi-Gauze Roll

4”x6yd.

1/unit

1

Certi-Non-Stick Pad

2”x3”

25/box

1

782 Tourniquet - Latex Free Forceps - Scissors Assortment

3

676 Eye Pads 4 Certi-Tape - 4 Oval/Strips

8/unit

1

HSB - Bloodborne Pathogen Economy

2

Certi-Sporyn - Antibiotic Cream

1g

25/box

1

First Aid Facts Guide Book

2

Certi-Burn Cream

1g

25/box

1

Certi-Stopper - XL-TD

4”x60”

2

Antiseptic BZK Towelettes

5”x7”

4

636 Triangular Bandage - w/Pins

40”x40”x56” 3/unit

1

Certi-Rip - Elastic Cohesive Bandage

2”x5yd.

1

Certi-Tape

1”x5yd.

1

Certi-Tape - Spool - Tri Cut

2”x5yd.

1

Sam Splint - Roll

36”

2

Eye Wash

4 oz.

1

Cotton Swabs

3”

2

Burn Dressing

4”x4”

Med

50/box

Packag-

3/unit

25/box

100/vial

55

HEAT STRESS PREVENTION

FEATURED VENDORS

56

Call 1-888-RAM-TOOL for more products.

HEAT STRESS PREVENTION

Cooling Towels

Sun Shade Extensions

Pop Up Tents

Neck Shades

Coolers

Bottled Water

Sun Screen Wipes

Cone Cups

Cup Dispensers

Protective Eyewear

Powder Mixes

Sweat Band Liners 57

HEAT STRESS PREVENTION

Beverage Coolers

Cooling Vests

Hard Hat Cooling Pads

Cooling Bandannas

Sun Shields

Heat Stress First Aid Kits

Cooling Sleeves

Evaporative Tank Tops

Ranger Hats

Hydration Packs

Cooling Neck Wraps

Fans

58

Weekday workers or weekend warriors, from the oil fields to the soccer fields, SqwincherÂŽ has the perfect package, flavor and formulation designed to satisfy the toughest hydration needs.

CONFINED SPACES

FEATURED VENDORS

60

CONFINED SPACES

Confined Space Tripod Kits

Blowers With Ducting

Blower Ducting

Gas Detectors

Wrench Kits

Confined Space Signs

Rescue Ladders

Ventilators

Lockable Covers

Manhole Guardrails

Manhole Cover Lifters

Tripods 61

JOB SITE SAFETY

FEATURED VENDORS

®

62

Call 1-888-RAM-TOOL for more products.

JOB SITE SAFETY

Lockout / Tagout Systems

Job Site Safety Signs

Whistles With Lanyards

Universal Spill Kits

Universal Heavy Duty Pads

Safety Cabinets

OSHA Pennant Flags

Multi-Gas Detectors

Calibration / Bump Stations

Gas Cylinder Cages

Flow Regulators

Calibration Gas 63

IN THE LAST 12 MONTHS

OVER 3,000 FREE DELIVERIES PER DAY

JOB SITE SAFETY

66

Safety Can Funnels

Rebar Caps

Carnie Caps

Spray Paint

Flashlights

Tarps

JOB SITE SAFETY

IN THE LAST 12 MONTHS

OVER 700,000 RAM TOOL TRUCK DELIVERIES

Fire Extinguishers

Fire Extinguisher Stands

Caution / Danger Tape

Ladder Stabilizers

Ladder Extenders

Safety Gas Cans

Emergency Beacons

Storm Whistles

Marking Flags

Debris Netting

AED Cabinets

Ladder Gate 68

PPE

FEATURED VENDORS

70

Call 1-888-RAM-TOOL for more products.

Some items may have a longer lead time due to COVID-19.

PPE

Safety Helmets and Hard Hats

Class 3 Mesh Vests

Class 2 Safety Vests

Class 2 Safety T-Shirts

Safety Aprons

Face Shields

Face Shield Brackets

Ear Muffs

Capstone Shields

Class E Safety Pants

Gloves

Safety Goggles 71

ANSI AND EN388 C U T L E V E L R AT I N G S ANSI CUT RATINGS 200-499 g CUT HAZARDS A1 LOWEST ANSI

500-999 g CUT HAZARDS A2 LIGHT ANSI

AUTOMOTIVE

GENERAL PURPOSE

ANSI

A4

1500-2199g MEDIUM CUT HAZARDS MANUFACTURING

ANSI

A7

4000-4999g VERY HIGH CUT HAZARDS

FOOD PREP & MEAT PROCESSING

ANSI

A5

2200-2999g MED./HIGH CUT HAZARDS

METAL FABRICATION

ANSI

A8

5000-5999g SEVERE CUT HAZARDS

WASTE MANAGEMENT

A3 1000-1499g ANSI

LIGHT/MED. CUT HAZARDS

OIL & GAS

g HIGH CUT HAZARDS A6 3000-3999 ANSI

METAL STAMPING

g EXTREME CUT HAZARDS A9 6000+ ANSI

RECYCLING

EN388 CHART

TEST

Abrasion Cut Tear Puncture Cut (TDM-100) Impact 72

RATING 1-4 1-5 1-4 1-4 A-F P, F, X

4344DX

SAFET Y SOLUTIONS PERFORMANCE VESTS

HARD HATS 48-73-1000

48-73-1001

48-73-1011

ANSI/ISEA 107-15

TYPE R CLASS 2

• ADAPT TO YOUR JOBSITE • 6 ACCESSORY SLOTS • 4 POINT RATCHETING SUSPENSION

ANSI/ISEA Z89.1

ANSI/ISEA Z89.1

CSA Z94.1

CSA Z94.1

TYPE I CLASS C

TYPE I CLASS E

CARRY MORE • REINFORCED FRONT POCKETS • COMFORTABLE PADDED COLLAR • QUICK INTERNAL SIZE ADJUSTMENT • FALL PROTECTION PASS-THROUGH

HARD HAT ACCESSORIES HARD HAT SWEATBAND REPLACEMENT 48-73-1080

HARD HAT CHIN STRAP 48-73-1082

BOLT TM HARD HAT MARKER CLIP 48-73-1085

BOLT TM HARD HAT HEADLAMP MOUNT REPLACEMENT 48-73-1090

4 POINT RATCHET SUSPENSION REPLACEMENT 48-73-1095

GLOVES

TOOL LANYARDS

ANSI/ISEA 107-15

CSA Z96-15

TYPE R CLASS 2

CLASS 2

HIGH VISIBILITY VESTS

ANSI/ISEA 107-15

TYPE R CLASS 2

*Sizes include S/M, L/XL, and XXL/XXXL

ANSI/ISEA 107-15

CSA Z96-15

TYPE R CLASS 2

CLASS 2

BETTER FIT. BETTER PROTECTION.

HIGH VISIBILITY DIPPED GLOVES 48-22-8817

48-22-8823 48-22-8820

50LB ANCHOR STRAP

EASILY CONNECT

WRIST LANYARDS

GOATSKIN GLOVES

REINFORCED NITRILE COATING • Protection for high wear areas SMARTSWIPE TM • Touchscreen compatible fingertips

48-22-8822

12ft Self-Adhering Tape 48-22-8860

48-22-8830

SPLIT RINGS

48-22-8835

split rings create a secure attachment point for tethering on tools with small lanyard rings.

ANSI/ISEA

48-22-8880

DIPPED GLOVES CUT LEVEL 1 Nitrile Dipped Gloves SMARTSWIPE™ Index Fingertips permits

121-2018

SAFETY GLASSES ANTI-FOG & ANTI-SCRATCH LENSES Added durability for jobsite conditions FLEXIBLE NOSE BRIDGE Adjustable fit COMFORTABLE ARMS Extended wear

RESPIRATORS

CUT LEVEL 3 Nitrile Dipped Gloves SMARTSWIPE™ Fingertips and Palms

CUT LEVEL 5 Nitrile Dipped Gloves SMARTSWIPE™ Fingertips and Palms

EAR PLUGS

NRR

ALL DAY COMFORT

32

EXPANDS QUICKLY NIOSH

48-73-2005

TAPERED SHAPE

N95

48-73-3006

48-73-4011 48-73-2020

VALVED RESPIRATORS

REUSABLE CORDED EAR PLUGS

Includes Milwaukee® case

48-73-2025

ALL DAY COMFORT QUICK FIT DESIGN

ANTI-SCRATCH LENSES

48-73-2040

48-73-2045

CUT LEVEL 3 Insulated Winter Dipped Gloves

HEARING PROTECTION

48-73-2000

HIGH PERFORMANCE SAFETY GLASSES MILITARY GRADE IMPACT PROTECTION FOG-FREE LENSES Coated for lasting fog-free lenses COMFORTABLE ARMS Extended wear

CUT LEVEL 1 Insulated Winter Dipped Gloves

CORDED FOR EASY ACCESS POLARIZED LENSES Reduces glare REMOVABLE GASKET Protects against debris

48-73-4001

VALVED RESPIRATORS W/ GASKET

48-73-3151

NRR

26

To See Full line, please visit: https://www.milwaukeetool.com/Products/Safety-Solutions

PPE

Hard Hat Suspensions

Hard Hat Headlights

Muti-Gas Cartridges

Ear Plugs

Glove Clips

Dust Masks

Kevlar Sleeves

Hard Hat Coil Tethers

Lens Cleaners

Arc/FR Certified Coveralls

25 Cal/cm2 Kits

Arc Flash Hoods

74

Call 1-888-RAM-TOOL for more products.

Some items may have a longer lead time due to COVID-19.

PPE

Building your success on our products Taking safety to new heights.

3M™ SecureFit™ X5000 Safety Helmet • Suspension system incorporates exclusive patented Pressure Diffusion Technology • Customize fit with multiple levels of vertical adjustment • Tested to European EN 12492 Mountaineering Helmet Standard for industrial climbing applications Engineered with workers in mind.

UVicator UV Indicator

Proprietary indicator that lets wearer know when to replace helmet due to UV exposure.

On-the-move, quick latch design.

3M™ Rugged Comfort Quick Latch Half Facepiece Reusable Respirator 6500 Series • Proprietary quick latch design offers a one-hand touch, drop-down mechanism for putting facepiece on and off while moving in and out of contaminated areas • 3M™ Cool Flow™ Valve helps reduce heat and moisture to make breathing easier • Low profile, half facepiece design offers a wide field of view and compatibility with welding and grinding shields Convenient Quick Latch Drop-Down Mechanism • Easy on and off as you move in and out of contaminated areas • No need to remove hard hats or faceshields when lowering and raising the respirator

PULL UP ON LATCH

QUICK LATCH CLOSED

QUICK LATCH OPEN

PULL DOWN ON LATCH

To open Quick Latch: Grasp the latch at chin level and pull up.

To close Quick Latch: Grasp the facepiece with your thumb on the bottom of the facepiece and your fi rst two fi ngers on top of the latch. Place the facepiece over your nose and mouth while pushing down on the latch.

3M, SecureFit, Cool Flow and 3M Science Applied to Life are trademarks of 3M Company. © 3M 2019. All rights reserved.

PREMIUM GLOVES SEAMLESS GRIP LITE

-Nylon Chassis for Increased Breathability -Foam Nitrile Palm for Enhanced Grip -Elastic Cuff for Snug Fit

RTGLT05

SIZES: SM - XXL

SEAMLESS IMPACT CUT 3

-Flexible TPR Protects Fingers, Knuckles and Thumb -HPPE ANSI Cut Level 3 Protection -Elastic Cuff for Snug Fit

RTIMPC306

SIZES: SM - XXL

SEAMLESS ANSI CUT 5

-HPPE ANSI Cut Level 5 Protection -Foam Nitrile Palm for Enhanced Grip -Elastic Cuff for Snug Fit

RTSC509

SIZES: SM - XXL

SEAMLESS IMPACT LITE

-Flexible TPR Protects Fingers, Knuckles and Thumb -Foam Nitrile Palm for Enhanced Grip -Elastic Cuff for Snug Fit

RTIMPLT05

SEAMLESS CUT 3

SIZES: SM - XXL

-HPPE Cut Level 3 Protection -Foam Nitrile Palm for Enhanced Grip -Elastic Cuff for Snug Fit

RTSC302

SIZES: SM - XXL

MECHANIC TOUCH

-Touchscreen Capability to Stay Connected -Terry Cloth Sweat Wipe to Manage Moisture -Performance Fit Cuff for Custom Fit

RTMGT02

SIZES: SM - XXXL

IMPACT UTILITY

-Flexible TPR Protects Fingers, Knuckles and Thumb -Reinforced Index Finger and Thumb Saddle Extends Life of Glove -Performance Fit Cuff for Custom Fit

RTIMP88

SIZES: SM - XXXL

PREMIUM MIG

IMPACT HYBRID CUT 5

-Flexible TPR Protects Fingers and Knuckles -Terry Sweat Wipe Helps Manage Moisture -ANSI Cut 5 Liner for Additional Protection

RTIMPC505

SIZES: SM - XXXL

PREMIUM TIG

-Extended Cuff for Additional Forearm Protection -Reinforced Thumb Saddle and Index Finger Extends Life of Glove -Fire Resistant Stitching for Additional Protection

-Seamless Index Finger for Rod Rolling -Extended Cuff Provides Additional Forearm Protection -Fire Resistant Knuckle Protection Extends Life of Glove

RTMIG00

RTTIG00

SIZES: SM - XXXL

PREMIUM STICK

-Extended Cuff Provides Additional Forearm Protection -Reinforced Thumb Saddle and Index Finger Extends Life of Glove -Fire Resistant Stitching for Additional Protection

RTSTK00

SIZES: SM - XXXL

SIZES: SM - XXXL

FR FABRICATOR CUT 2

-Goatskin Palm for Additional Heat and Abrasion Protection -Cut Level 2 Protection -Impact Protection Extends the Life of Glove

RTFRGC205

SIZES: SM - XXXL

PPE

Safety Glasses

Respirators

Winter Hard Hat Liners

Safety Vests

Go To Work Kits

Wind Shirts

Side Shields

Coveralls

Class 3 Bomber Jackets

Back Support Belts

Welding Helmets

Welding Goggles

78

Call 1-888-RAM-TOOL for more products.

Some items may have a longer lead time due to COVID-19.

CONSTRUCTION Distributed by:

BREAK AWAY

NON-ANSI

BREAK AWAY

NON-ANSI

BREAK AWAY

NON-ANSI

MAXIFLEX® & MAXICUT®

MAXIDRY®

• MicroFoam Nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance • Knit Wrist helps prevent dirt and debris from entering the glove

• Foam Nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance • Knit Wrist helps prevent dirt and debris from entering the glove • Increased resistance to oils via ATG’s LiquiTech® technology platform

PIP ITEM NUMBER ANSI CUT EN 388 LINER COLOR COATING COLOR COATING COVERAGE SIZES

34-874

A1

4131

Gray

Black

Palm & Fingertips

XXS - 3XL

PIP ITEM NUMBER

EN 388

COATING COVERAGE

SIZES

4121

LINER COLOR

Gray

COATING COLOR

Purple/Black

Palm & Fingertips

XS - 2XL

34-844

---

4131

Gray

Black

Palm & Fingertips

XXS - XL

56-424

34-8743

A2

4331

Green

Black

Palm & Fingertips

XS - 3XL

56-425

4121

Gray

Purple/Black

Palm, Full Finger & Knuckle XS - 2XL

XS - 3XL

56-426

4111

Gray

Purple/Black

Full

44-3745

A3

4542

Blue

Black

Palm & Fingertips

NON-ANSI

NON-ANSI

NON-ANSI

4342

S - 2XL

4X41D

4542

G-TEK® POLYKOR™

GREAT WHITE® 3GX®

G-TEK® POLYKOR™

• PolyKor™ blended shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance • Polyurethane coated palm and fingertips provides a secure grip in dry & slightly wet/oily conditions and offers high dexterity and tactile sensitivity

• Dyneema® Diamond & Lycra shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance • Polyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry grip

• PolyKor™ blended shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance • Polyurethane coated palm and fingertips provides a secure grip in dry & slightly wet/oily conditions and offers high dexterity and tactile sensitivity

PIP ITEM NUMBER

PIP ITEM NUMBER

16-D622

LINER COLOR

White

COATING COLOR

Gray

COATING COVERAGE

SIZES

Palm & Fingertips XS - 2XL

RAM TOOL www.ram-tool.com | 1-888-RAM-TOOL

19-D322

LINER COLOR

White

COATING COLOR

Gray

COATING COVERAGE

SIZES

PIP ITEM NUMBER

Palm & Fingertips

XS - 2XL

16-564

LINER COLOR

Gray

COATING COLOR

Gray

COATING COVERAGE

SIZES

Palm & Fingertips

XS - 2XL

NON-ANSI

BREAK AWAY

NON-ANSI

BLACK LABEL™ 4-IN-1 REVERSIBLE GRAY BOTTOM WINDBREAKER • Heavy-duty PU coated polyester outer shell offers • Detachable zippered sleeves • Reversible to dark gray with 2 slash pockets and chest pocket PIP ITEM NUMBER

COLOR

333-1500-R

NON-ANSI

NON-ANSI

Hi-Vis Yellow

BREAK AWAY

NON-ANSI

BREAK AWAY

NON-ANSI

NON-ANSI

T-SHIRT WITH BLACK BOTTOM FRONT

VALUE FOUR POCKET ZIPPER MESH VEST

• 100% Polyester Birdseye Mesh • Durable lightweight performance wicking fabric • Enhanced with UPF 50+ protection • 2” silver reflective tape

• Breathable polyester mesh • 2” silver reflective tape • Zipper closure • 4 pockets

PIP ITEM NUMBER

SIZE

PIP ITEM NUMBER

SIZE

312-1250B-LY

Hi-Vis Yellow

S - 5XL

303-MVGZ4P-LY

Hi-Vis Yellow

S - 5XL

S - 5XL

312-1250B-OR

Hi-Vis Orange

S - 5XL

303-MVGZ4P-OR

Hi-Vis Orange

S - 5XL

NON-ANSI

COLOR

NON-ANSI

COLOR

SIZE

NON-ANSI

NON-ANSI

ZIPPER MESH VEST

TWO-TONE SURVEYORS VEST

TWO-TONE SURVEYORS VEST

TWO-TONE SURVEYORS VEST

• Breathable polyester mesh • Zipper closure • 2” silver reflective tape • 1 internal lower pocket • 1 external chest pocket

• Solid front and mesh back • 2” two-tone tape • Zipper closure • 2 mic tabs with reinforced stitching • 11 pockets

• Ripstop black bottom offers great protection against tearing and helps hide dirt • D-ring access • 11 pockets

• ANSI/ISEA 107 Class 2 • Breathable polyester mesh top and durable solid polyester bottom • 2” two-tone reflective tape • 10 pockets

SIZE

PIP ITEM NUMBER

SIZE

PIP ITEM NUMBER

SIZE

PIP ITEM NUMBER

S - 6XL

302-0500-LY

Hi-Vis Yellow

S - 7XL

302-0650D-LY

Hi-Vis Yellow

S - 5XL

302-0700-LY

Hi-Vis Yellow

S - 5XL

302-0500-OR

Hi-Vis Orange

S - 7XL

302-0650D-OR

Hi-Vis Orange S - 5XL

302-0700-OR

Hi-Vis Orange

S - 5XL

PIP ITEM NUMBER

COLOR

302-0702Z-LY

Hi-Vis Yellow

302-0702Z-OR

Hi-Vis Orange S - 6XL

RAM TOOL www.ram-tool.com | 1-888-RAM-TOOL

COLOR

COLOR

COLOR

SIZE

EVOLUTION® DELUXE 6161 FULL BRIM HARD HAT • High-Density Polyethylene (HDPE) shell with a full brim providing additional protection against sun, glare, rain and falling debris PIP ITEM NUMBER

COLOR

SIZE

280-EV6161-10

White

Non-Vented

280-EV6161-20

Yellow

Non-Vented

280-EV6161-30

Green

Non-Vented

280-EV6161-40

Gray

Non-Vented

280-EV6161-50

Blue

Non-Vented

280-EV6161-60

Red

Non-Vented

280-EV6161-LY

Hi-Vis Lime Yellow

Non-Vented

280-EV6161-OR

Hi-Vis Orange

Non-Vented

EVOSPEC® SAFETY EYEWEAR

CR2 REFLECTIVE DECAL KIT

• Easy assembly into any Evolution® Deluxe 6100 hard hat • Retracts into helmet shell when not in use • Anti-scratch/anti-fog lens coating • Polycarbonate lenses block 99.99% of the sun’s ultraviolet rays • Ultraviolet protection has already been incorporated within the lens material during lens production

• Class R2 high intensity reflective material offers significantly more reflectivity than standard reflective clothing material

PIP ITEM NUMBER

FRAME

PIP ITEM NUMBER

LENS

250-EVS-0000

Black

Clear, AS/AF

250-EVS-0001

Black

250-EVS-0002

Black

Gray, AS/AF Indoor/Outdoor, AS/AF

COLOR

281-CR2FB-10

Gray

281-CR2FB-10-BL

Blue

281-CR2FB-10-OR

Orange

281-CR2FB-10-RE

Red

281-CR2FB-10-GR

Green

281-CR2FB-10-YE

Yellow

THE CHOICE IS CLEAR

PIP’s FogLess® 3Sixty™ hydrophobic technology repels moisture and prevents fog from gathering on lenses.

The advanced formulation was developed to adhere permanently to the lens, ensuring long-lasting performance that is able to withstand multiple lens cleanings.

RAM TOOL www.ram-tool.com | 1-888-RAM-TOOL

ANSER™

FORTIFY™

RECON™

• Sleek, sporty style with wraparound lens protection

• Lightweight, comfortable foam-sealed design keeps out dust

• Lightweight, rimless design provides all day comfort

PIP ITEM NUMBER

PIP ITEM NUMBER

FRAME LENS

PIP ITEM NUMBER FRAME LENS

250-AN-10520 Black

Clear, FL®3Sixty™

250-54-0020

Gray

Clear, AS/AF

250-32-0520 Clear Clear, AS/FL®3Sixty™

250-AN-10521 Black

Gray, FL 3Sixty™

250-54-0021

Gray

Gray, AS/AF

250-32-0521 Black Gray, AS/FL®3Sixty™

250-54-0520

Gray

Clear, FL 3Sixty™

7 total styles. Please call for details

FRAME LENS

23 total styles. Please call for details

®

®

OU R LINE U P

PIP® DUAL CERTIFIED KIT

PIP® DUAL CERTIFIED COVERALL

PIP® LONG SLEEVE T-SHIRT

• 8 Cal/cm2 • Dual certified coverall - 9100-2160D • Hard hat - 250-EV6151-OR • Arc shield - 9400-52505 • Balaclava - 9100-HDFR15 • Safety glasses - 250-46-0020 • Carry bag - 9400-52599

• Protective stand-up collar with hook & loop closure • Storm guard with hook & loop closure • Action back for mobility • Side elasticized waist • FR rib knit cuffs • Hook & loop on bottom • 2 waist patch pockets with side access

• 6.5 oz. 100% cotton interlock knit FR • Fabric meets requirements in accordance with NFPA 2112-2012 • Provides next to skin comfort and breathability • Ideal for daily wear use and under arc flash suits and coveralls • One left chest pocket

SIZES

ITEM NUMBER

SIZES

ITEM NUMBER

S - 5XL

9100-2160D

S - 5XL

385-FRLS

ITEM NUMBER

9150-5388E

COLOR

Navy

COLOR

Navy

COLOR

Navy

SIZES

Gray

Orange

PIP® DUAL CERTIFIED WORKSHIRT

NOVAX® ELECTRICAL SAFETY KIT

NOVAX® ELECTRICAL SAFETY KIT

• Dual-certified to NFPA 70E and NFPA 2112-2012 standards • 2 chest pockets with pencil line in each; buttoned flap closure • Bar-tacked at all stress points • Aramid high-tenacity FR thread • PPE 2 (HRC 2)

• 1 pair ESP Gloves-Black (150-00-11) • 1 pair Goatskin Protectors (148-1000) • 11-inch Nylon Glove Bag (148-2136)

• 1 pair ESP Gloves-Black (150-0-11) • 1 pair Goatskin Protectors (148-1000) • 11-inch Nylon Glove Bag (148-2136)

ITEM NUMBER

385-FRWS

COLOR

Navy

ITEM NUMBER

150-SK-00

SIZES

Tan

S - 4XL

RAM TOOL | WWW.RAMTOOL.COM 4500 5th Avenue South, Building A, Birmingham, AL 35222 Phone: 205-714-3352 | Fax: 205-449-9904 | mike.doyle@ramtool.com

COLOR

Black

SIZES

ITEM NUMBER

7 - 12

150-SK-0

COLOR

Black

M - 4XL

SIZES

7 - 12

88

IN THE LAST 12 MONTHS

OVER 658,000 PRODUCTS DELIVERED IN UNDER 5 HOURS

ANSI

ANSI

ANSI

ANSI

ANSI

ABRASION

CUT

PUNCTURE

CUT

PUNCTURE

4

A4

4

TenActivTM Composite Filament Fiber Cut-Resistant Knit with Black Polyurethane Palms

TenActivTM Composite Knit Cut-Resistant Gloves with Polyurethane Palms

FEATURES:

FEATURES: • TenActiv™ glove features fine 13-gauge lint-free continuous filament yarn that is stronger than steel on an equal-weight basis

•L int-free, continuous filament yarn that is stronger than steel on an equal-weight basis •H igh-strength composite filament fiber prevents yarn from poking through the hand or causing itchiness •L ow-shedding polyurethane palm coating great grip and excellent tactile feel •R ated new ANSI cut level A4 for excellent protection against cut hazards

ANSI

ANSI

CUT

PUNCTURE

A4

5

A3

• Rated ANSI level A3 for cut resistance • Snug fitting, breathable, flexible, and ergonomically shaped • Black polyurethane palm coating offers excellent dexterity and tactile sensitivity at the same time providing comfort and grip

3

3

ARC RATING

Endura® Cut-Resistant Arc Flash Goat-Grain Driver Glove

KeepKleen® 3 Mil Blue Nitrile Powder-Free Disposable Exam Gloves

KeepKleen® 3.5 Mil Fine-Touch Black Powder-Free Disposable Exam Gloves

FEATURES: • Soft and lightweight driver-style, goat grain leather glove is fully lined with a blended Kevlar®/composite filament fiber for ANSI level A4 cut protection

FEATURES: • Thin 3 mil nitrile improves tactile sensitivity while still offering a high tensile strength

FEATURES: • 3.5 mil-thin nitrile has better touch sensitivity compared to standard 4, 5 or 8-mil thick gloves

• Texturized fingertips for better grip

• Gloves are ambidextrous for quick selection

• Medical-grade designation

• Powder-free for sensitive skin

• Cuff is beaded to prevent tearing during donning

• Ergonomically shaped to reduce hand fatigue

•P owder-free for sensitive skin, and no natural rubber proteins that may cause allergies

• Beaded cuffs prevent tearing in traditional weak spot

•G oatskin has high-tensile strength and abrasionresistant properties and is often referred to as nature’s strongest leather •K eystone thumb provides extra durability •A rc flash testing placed these gloves at level 3, with an Arc Thermal Performance Value (ATPV) of 36 cal/cm² Note: these gloves are designed for spark and flame resistance, not thermal contact

•D esigned with silicone-free materials to prevent contamination • FDA approved

•C ontains no natural rubber proteins that may cause allergies • 200 gloves per dispenser • Industrial grade

ANSI

ANSI

ANSI

ANSI

ANSI

CUT

PUNCTURE

ABRASION

CUT

PUNCTURE

A5

3

4

4

A4

TenActivTM 13-Gauge Salt-and-Pepper High Cut-Resistant Glove with PU Palms

TenActivTM Composite Filament Fiber Cut-Resistant Knit Gloves with Foam Nitrile Palms

FEATURES: • Knit with a blend of steel, HPPE, composite filament fiber for ANSI level A5 cut protection

FEATURES: • TenActiv™ gloves feature lint-free, continuous filament yarn that is stronger than steel on an equal-weight basis

•T enActiv™ yarn feels cool against the skin and is more breathable than other fabrics

• Nitrile palm coating offers great dry grip and durability

•P olyurethane (PU) palm is non-shedding – ideal for applications where contamination is a concern •P olyurethane is the best palm coating for high tactile feel

•S pecifically designed for electrostatic dissipative (ESD) properties when working with micro-electronic work • Silicone free •T hese gloves are treated with Ultra-Fresh to achieve 99.9% antimicrobial status

ANSI

ANSI

ANSI

ANSI

ANSI

ANSI

CUT

PUNCTURE

CUT

ABRASION

CUT

PUNCTURE

A6

4

TenActivTM Composite-Knit Cut-Resistant Glove with Reinforced Thumb and Polyurethane Palms FEATURES • TenActiv™/HPPE/steel/composite filament fiber blend provides excellent cut resistance • ANSI cut level A6 protection • Polyurethane palm coating provides excellent grip •T humb crotch is reinforced with nitrile coating to reduce wear in critical areas

A5

4

A5

3

TenActivTM Stay-Cool Cut-Resistant Tublar Sleeves

TenActivTM 13-Gauge Gloves with Foam Nitrile Palm Coating

FEATURES • Tubular knit sleeves protect entire arm against cut, abrasion and dirt

FEATURES • Knit with a blend of Steel, TenActiv™️, and composite filament-fiber for ANSI Cut Level A5 protection

• Sleeves stay cool for all-day comfort

• TenActiv™ yarn feels cool against the skin

• Available with or without thumbhole

•F oam nitrile palm provides excellent grip in light oil applications while offering outstanding resistance to punctures, cuts, snags and abrasion

97

SILICA DUST PROTECTION

FEATURED VENDORS

98

Call 1-888-RAM-TOOL for more products.

SILICA DUST PROTECTION

Dust Extraction Systems

Hollow Bits

Vacuum Cleaner Bags

HEPA Filters

Grinder Wheel Guards

Demolition Dust Extraction

Dust Collectors

Dust Extraction Hoses

Dust Extraction Quick Connect

Hammer Dust Extraction

Large Hammer Dust Extraction

Cordless Kits 99

IN THE LAST 12 MONTHS

OVER 834,000 TOTAL ORDERS 100

LADDERS AND SCAFFOLDS

FEATURED VENDORS

102

Call 1-888-RAM-TOOL for more products.

LADDERS AND SCAFFOLDS

3 Foot Podium Ladder

4 Foot Podium Ladder

6 Foot Podium Ladder

8 Foot Podium Ladder

10 Foot Podium Ladder

Baker Style Scaffolds

Scaffold Towers

Scaffold Extensions

Scaffold Guardrail Systems

Scaffold Base Plates

Scaffold Leveling Jacks

Scaffold Caster Wheels 103

LADDERS AND SCAFFOLDS

Aluminum Planks

6 Foot Standing Ladder

8 Foot Standing Ladder

10 Foot Standing Ladder

12 Foot Standing Ladder

8 Foot Trestle Ladder

10 Foot Trestle Ladder

12 Foot Trestle Ladder

Portable Work Platforms

Electricianâ&#x20AC;&#x2122;s Ladders 104

Extension Ladders

Telescoping Multi Position Ladders

Work Facing Any Direction

WORK COMFORTABLY IN EVERY DIRECTION The Werner Podium is built with a large standing platform and extended guardrail so you can work comfortably all day, in every direction.

375 LB. LOAD CAPACITY

300 LB. LOAD CAPACITY

WERNERPODIUM.COM 105 AD697-02 ©2018 Werner Co. 03/18

375lb LOAD CAPACITY Type 1AA Duty Rating Combined Weight of User and Materials

INCREASE PRODUCTIVITY • Seamless Position Change • One Hand Lock Adjustment • Versatile Leaning Top

FIBERGLASS MAXIMUM

SAFETY & DURABILITY

NON-CONDUCTIVE SIDE RAILS FOR WORKING NEAR ELECTRICITY

Stepladder

Leaning Ladder

Straight Ladder

375lb

• Seamlessly go from step to straight ladder in one adjustment • One handed lock adjustment • All in one top, no adjustment needed

LOAD CAPACITY

• Non-marring rubber top protects work surfaces

Type 1AA Duty Rating Combined Weight of User and Materials

• Compact rear rails fit between framing studs

SPECIFICATIONS

Integrated leaning top with tool bin & magnet

MODEL NO.

STEPLADDER HEIGHT

STEPLADDER REACH

STRAIGHT LADDER HEIGHT

STRAIGHT LADDER REACH

APPROX. PRODUCT LENGTH

APPROX. PRODUCT WIDTH

LDP7306

6ft

10ft

9ft

13ft

72.5in

24in

DIMENSIONS TOP

16in x 19.5in

REAR RAILS

2-1/2in

FRONT RAILS

3-1/8in

REAR FLANGE

1in

FRONT FLANGE

1-1/4in

STEPS

3in Trapezoidal

One hand lock adjustment

Rear rails fit between standard framing studs

Slip-resistant Traction-Tred® steps

EDGE360® bracing

*Number of rear horizontal braces varies by model

GM7671-01 © 2020 WernerCo Rev. C 2/20

WERNERCO CORPORATE HEADQUARTERS: 555 Pierce Rd. Suite 300, Itasca, IL 60143 TEL: (888) 523-3371 FAX: (888) 456-8459 www.wernerladder.com

LADDERS AND SCAFFOLDS

E C

D

B

A

F G 108

LADDERS AND SCAFFOLDS M

K

I

L

J

H

LADDERS A. 6204 4 ft Type IA Fiberglass Step Ladder B. 6206 6 ft Type IA Fiberglass Step Ladder C. 6208 8 ft Type IA Fiberglass Step Ladder D. 6210 10 ft Type IA Fiberglass Step Ladder E. 6212 12 ft Type IA Fiberglass Step Ladder F. PD6206 8 ft Type IA Fiberglass Podium Ladder G. PD6208 10 ft Type IA Fiberglass Podium Ladder H. D6216-2 16 ft Type IA Fiberglass D-Rung Extension Ladder I. D6220-2 20 ft Type IA Fiberglass D-Rung Extension Ladder J. D6224-2 24 ft Type IA Fiberglass D-Rung Extension Ladder K. D6228-2 28 ft Type IA Fiberglass D-Rung Extension Ladder L. D6232-2 32 ft Type IA Fiberglass D-Rung Extension Ladder M. D6240-2 40 ft Type IA Fiberglass D-Rung Extension Ladder

109

SAFE SPACES

FEATURED VENDORS

110

Call 1-888-RAM-TOOL for more products.

SAFE SPACES

Water Filled Barricades

Bollards

Bollard Covers

Cable Protection

Stop / Slow Paddles

Safety Stanchions

Safety Cones

Safety Cone Collars

Cone Chains

Collapsible Safety Cones

Channelizer Drums

Road Signs 111

SAFE SPACES

Roof Edge Delineators

Barricades

Roll Up Construction Signs

Portable Sign Stands

Fatigue Reduction Mats

LED Batons

Barricade Warning Lights

Rumble Strips

Ground Poles

Looper Tubes and Bases

Wheel Chocks

Reflective Sheeting

Transform worn out slippery floors into a safe nonslip surface SafeStep Fiberglass Reinforced Plastic Covers ÂŽ

Virtually indestructible anti-slip solution for steps, walkways and ladders. This easy to install (glue and screw) solution is available in various pre-cut sizes and in course or medium grit texture.

Visit rustoleum.com/industrial to see all our distinct ant-slip products.

rustoleum.com/industrial

TRD0014_0119

11 Hawthorn Parkway â&#x20AC;˘ Vernon Hills, Illinois 800-899-1729 Fax 800-678-2176

SAFE SPACES

ADA Panels

Drum Bases

Reflective Stanchions

Traffic Cones

Safety Flags

Caution / Danger Tape

Pallet Rack Protectors

Reflective Tape

Non-Skid Floor Markings

Non-Skid Tape

Rooftop Guardrails

Perimeter Warning Systems

114

Traffic & Construction Zone Products • • •

• • •

Made in the USA of Low Density Polyethylene Loop Handles for easy transport Bases made in the USA of Recycled Tires Description

RAM Part No.

42” Looper Tube with Two 3” Collars & 8 Lb. Base

VIZ-46133 TRUHIP

42” Looper Tube with Two 3” Collars & 12 Lb. Base

VIZ-46133 TRU12HIP

42” Looper Tube with Two 3” Collars – NO BASE

VIZ-4613 CHIP

42” Looper Cone with Four 4” Collars & 16 Lb. Base

VIZ-46244-CRU-16HIP

42” Looper Cone with Four 6” Collars & 16 Lb. Base

VIZ-46266CRU16HIP

42” Looper Cone with Four 6” Collars – NO BASE

VIZ-46266 CHIP

12 Lb. Rubber Base Only for Looper Tubes

VIZ-42000 TB12

16 Lb. Rubber Base Only for Looper Cones

VIZ-42016 CRU

30 Lb. Rubber Base Only for Looper Cones

VIZ-42030 CRU 30

PVC Traffic Cones

Made in the USA of Low Density Polyethylene 80% Recycled by Weight and Recyclable PVC Free! No Stick. No Stink.

• •

Description 18” Plain

VIZ-15018 NSWB C3

18” / 3 Lbs. Plain

VIZ-16018 NSWB 3

28” Plain

VIZ-15028 NSWB C7

28” With Collars

VIZ-15028 HIWB C7

VIZ-16018 HIWB 3 VIZ-16028 NSWB 7

28” / 7 Lbs. with Collars

VIZ-16028 HIWB 7

36” / 10 Lbs. Plain

VIZ-16036 NSWB 10

36” / 10 Lbs. with Collars

VIZ-16036 HIWB 10

36” / 12 Lbs. Plain

VIZ-16036 NSWB 12

36” / 12 Lbs. with Collars

VIZ-16036 HIWB 12

36” / 12 Lbs. with Collars & FL DOT Approval

VIZ-16036 HIWB 12 FL

• • • • •

Description

RAM Part No.

18” Stop / Slow Hand Paddle Non Reflective

VIZ-18018 SS NS

24” Stop / Slow Hand Paddle Non Reflective

VIZ-18024 SS NS

Replacement Wooden Hand Paddle – 8”

VIZ-18024 WH

24” Stop / Slow Non Reflective with 5’ Handle

VIZ-18024-SSNS5

24” Stop / Slow EG Reflective with 6’ Handle

VIZ-18024-SS EG 6T

24” Stop / Slow DG Reflective with 6’ Handle

VIZ-18024-SS DG6 9

•

Meets OSHA 1926.502(f) Warning Line Systems for 39” Height and 16lb. Pull Test Made in the USA 30 Lb. Bases for maximum wind resistance and stability without damaging the roof

• •

Telescoping Cone Bars • •

Made in the USA of aluminum Multiple grades of reflective available

RAM Part No.

RAM Part No.

18” / 3 Lbs. with One Collar

• •

MUTCD Compliant Injection Molded

Description

28” / 7 Lbs. Plain

STOP / SLOW Paddles

Create Instant Positive Separation Use with Cones or Delineators Description

RAM Part No.

Yellow / Black – 4’ to 6.5’

VIZ-15046A-CBYB

White / Orange – 5.5’ to 10.5’

VIZ-150610A-CBOW

Made in the USA – 6’ x 32” x 18” 80 Lbs. Empty. 1100 Lbs. Full Includes one steel connection pin and keeper pin Accepts the Water Wall Fence Panels and / or Gates Meets the new MASH Standard for Test Levels 1 & 2 as an LCD (Longitudinal Channelizing Device)

• • •

Made in the USA Interlocking Walls Create Safe Spaces & Positive Separation

Description

RAM Part No.

39” Roof Edge Delineator Cone & 30 Lb. Rubber Base

VIZ-47039-CRU-30

Contractor Bundle – (17 Cones, 17 Bases, 105’ Flag Line)

VIZ-47039-CB-001

39” Roof Edge Delineator Cone – NO BASE

VIZ-47039-CSO

30 Lb. Rubber Base for Roof Edge Cone

VIZ-47030-CRU

OSHA Pennant Flag 12 x 18 x 105’

VIZ-47100-PFLAG105

• • • • • •

Made in the USA – 6’ x 32” x 18” 100 Lbs. Empty. 1200 Lbs. Full Contains 3 Molded In Steel Cables Includes one steel connection pin and keeper pin Accepts the Water Wall Fence Panels and / or Gates Meets the new MASH Standard for Test Levels 1 & 2 as a Barrier

Description

RAM Part No.

Orange Water Wall – 6’

VIZ-45032-O

Description

White Water Wall – 6’

VIZ-45032-W

ADA Compliant Wall – Orange

VIZ-57000-AO

Description

Fence Panel – 4’ x 6’

VIZ-45032-WWF

ADA Compliant Wall – White

VIZ-57000-AW

Orange Water Cable Barrier – 6’

VIZ-45332-O

Gate System – 6’ Complete

VIZ-45032-WWFG-C

Urbanite Wall – Orange

VIZ-57000-UO

White Water Cable Barrier – 6’

VIZ-45332-W

Urbanite Wall – White

VIZ-57000-UW

RAM Part No.

RAM Part No.

Fence Panel – 4’ x 6’

VIZ-45032-WWF

Gate System – 6’ Complete

VIZ-45032-WWFG-C

115

From Day One Until Day Done, One Call Gets It All www.ramtool.com 1-888-RAM-TOOL ALABAMA

ILLINOIS

OHIO

TEXAS

Birmingham 205-591-2527

Chicago 815-221-2100

Cincinnati 513-714-3980

Austin 512-927-4200

Huntsville 256-772-8725

KENTUCKY

Columbus 888-726-8665

Corpus Christi 361-883-0921

OKLAHOMA

Dallas 972-466-1050

Mobile 251-432-1867 Montgomery 334-270-8665

FLORIDA Fort Lauderdale 954-777-1870 Jacksonville 904-262-2903 Miami 305-459-0850 Orlando 407-888-1341 Pensacola 850-434-0227 Tampa 813-612-4950

GEORGIA Atlanta 770-270-1300 Savannah 912-233-7022

Louisville 502-380-4100

LOUISIANA Baton Rouge 225-297-4300 New Orleans 504-468-4100

MICHIGAN Detroit 888-726-8665

MISSISSIPPI Gulfport 228-864-5528

Oklahoma City 405-951-7980

SOUTH CAROLINA Charleston 843-747-5358 Columbia 803-808-2680 Greenville 864-987-3300

TENNESSEE

NORTH CAROLINA

Chattanooga 423-698-0653

Charlotte 704-940-0158

Knoxville 865-588-1614

Greensboro 336-274-6815

Memphis 901-332-6181

Raleigh 919-598-1488

Nashville 615-256-9890

Wilmington 910-746-6151

Fort Worth 817-759-1993 Houston 713-454-1234 San Antonio 210-659-5859

DISTRICT OF COLUMBIA Washington, DC 703-378-1125

VIRGINIA Chesapeake 757-366-8883 Richmond 804-358-3331 Roanoke 540-344-6211

WEST VIRGINIA Charleston 304-345-4747