UNION GLASS - Brochure Glass Division

MADE

IN

I TA LY

GLASS DIVISION INTEGRATED PROJECT DIVISION

THE GROUP

Cat. OG9 - Class. III

UNION GLASS

UNION GLASS, with offices in Motta di Livenza (TV), is specialised in the processing and transformation of flat glass with high technological glass content. The company, in order to offer its Customer a 360° solution, has recently developed, within its Integrated Project Division, UNION PROJECT, a special division devoted to the design and sizing of glass.

UNION GLASS, relies on experienced engineers, architects, technicians and surveyors, that are able to treat and analyse every aspect that concerns glass and its similar or complimentary products, thus increasing performance and dynamics. UNION PROJECT ensures accurate responses to the increasingly complex and varied market demands in the glass and architectural integration sector. The new division adds value and expertise to both UNION GLASS, as well as other companies of the Group such as: LA TORRE VETRO and VAM. LA TORRE VETRO, with offices in Villafranca di Verona (VR), focuses on the insulating glass sector and VAM, with offices in Maron di Brugnera (PN), is active in the furnishing and household appliance glass sectors.

They are actually independent, but complementary as a result of the services and products offered.

UNION GLASS, with a production area of over ​​ 10,000 square metres, has a strong presence in the photovoltaic sector. Know-how and experience acquired in the glass sector, together with the use of the state of the art automated production lines and highly skilled labour, have allowed UNION GLASS to become one of the leading Italian manufacturers of photovoltaic glass for architectural integration (biPV) and photovoltaic modules.

High production flexibility and the ability to find new and innovative solutions allow UNION GLASS to be an ideal partner for:

˙˙

architects designers

˙˙

shutter Fitters construction Companies

to complete works which provide for the use of glass in its various applications, structural façades, door, window and shutters, railings, roofing, etc..

03

Our glass, all certified, is produced in a wide range of types and can be applied in diverse sectors:

PUBLIC BUILDING AND URBAN FURNISHINGS

hospitals, museums, schools, theatre, auditoriums, sporting facilities, signs, etc.

PRIVATE BUILDINGS

residential complexes, hotels, restaurants, shops, offices, shopping centres, industrial buildings, etc.

COMMERCIAL AND RAIL VEHICLES

04

UNION GLASS Safety glass (toughened, HST, laminated) • Insulating glass and high solar control • Insulating soundproofing glass • Fire protection glass • Panted glass (enamelled, screen printed,...)

•

TOUGHENED SAFETY GLASS

TOUGHENED + HST

PVB LAMINATED GLASS

SG LAMINATED ANTI-HURRICANE GLASS

SCREEN PRINTED AND ENAMELLED GLASS

COMMERCIAL AND RAIL VEHICLES

05

TOUGHENED SAFETY GLASS Toughened glass is considered "safety glass" inasmuch as when it breaks, it is fragmented into many small pieces which are not hazardous to the safety of individuals.

This type of toughened glass is obtained by subjecting the glass to a heat treatment at about 700 degrees and then carrying out instant cooling, seeking to create a surface compression able to increase the resistance of the glass to mechanical vibrations or stress and thermal shock.

Photos: Stahlbau Pichler srl

To ensure quality, UNION GLASS toughened glass is UNI certified and is EC marked and makes reference to EN 12150 and EN 14179 regulations.

06

UNION GLASS RANGE OF PRODUCTION Toughened glass of any type Thickness from 3 mm to 25 mm • Type of toughening process: horizontal oscillating electric and convection heaters • •

FIELD OF APPLICATION

It is used in all applications that require a high degree of safety, mechanical strength and resistance to temperature changes (thermal shock).

07

08

UNION GLASS

LAMINATED GLASS Laminated glass is obtained by assembling a number of glass layers through the application of plastic inter-layers (PVB, SG and EVA).

Laminated glass offers the best safety guarantee, in terms of protection of individuals, from possible injury resulting from accidental glass breakage, as well as offering protection against external actions by intruders.

According to its characteristics and applications, laminated glass is governed by the following standards: UNI EN 12600: Impact test method and classification for flat glass UNI EN 356: Testing and classification for resistance against manual attack • UNI EN 1063: Classification and testing for bulletproof resistance • •

PRODUCTION RANGE

Each laminated sheet can be composed of different types of glass such as tempered, hardened, enamelled or screen-printed, and, in relation to the quantity and types of inter-layers used, can take on different safety features.

The main classes can be divided into: • Simple safety Accident Resistant and soft body impact resistance • Burglar glass Vandal Resistant - High performance on the resistance • Bulletproof High performance resistance to firearm bullets • Laminated with SG (Sentryglas) High mechanical and structural resistance

FIELD OF APPLICATION Roofing Railings • One-off structure façades • Window displays • Insulating glass • Pavements • Shading • •

09

SG LAMINATED GLASS ANTI-HURRICANE (SentryGlas)

The laminated glass inter-layers made by SG (SentryGlas), also commonly called hurricane resistant, have extremely high mechanical strength gained from this particular type of plastic that (after processing) acquires high rigidity and hardness providing extra "mechanical" support.

An additional particular feature of this laminated glass is the shape retention even in the event of breakage of the glass layers; unlike PVB, no glass laminate with SG collapses or shears, and it is specifically this behaviour that ensures total safety against falling into nothingness.

Glass laminated with SG offers the following benefits in comparison to PVB glass: • Greater mechanical resistance to bending • High structural strength • 30% thickness reduction

10

UNION GLASS PRODUCTION RANGE Thicknesses: from 3+3 mm to any combination of thicknesses • Dimensions: standard up to 6000x3210 mm and non-standard up to 7000 mm •

FIELD OF APPLICATION Facades subject to strong wind Glazed floors, landings and stair steps • Load-bearing glass balustrades • Stair and balcony railings • Glass beams • Wind-bracing fins • •

11

HIGH-TECH LAMINATED GLASS Over time, UNION GLASS has also become specialised in laminating and insulating glass and in the insertion of double glazing materials other than glass, such as marble, metal, steel, etc.

It is a type of processing used mainly in interior architecture and faรงade cladding.

With the lamination method carried out using PVB or SG, it is possible to create the marble sheet coating, stone floors, stainless steel surfaces and metallic mesh with glass of any size and thickness.

12

UNION GLASS FIELD OF APPLICATION Partitions with laminated glass and marble Internal stairs with laminated Glass-Steel steps • Mezzanine floors and flooring in general • Sliding doors, wall cladding, skylights, etc.

• Protection of artistic objects in museums, churches, etc.

• Structural façades • •

13

DECORATIVE AND DESIGN GLASS We create decorative glass of all types, reproducing on the plate infinite graphic solutions, even with multiple colours.

SCREEN PRINTED GLASS

By means of screen printing frames that are specially created and designed, the screen printing line allows the reproduction of a drawing or writing in one or more shades of colour, on the glass surface; the special paint used, available in a variety of hues, ensures total durability due to its chemical composition, which, during the baking phase, melts and becomes one with the glass.

ENAMELLED GLASS

The roller enamelling process allows the colouring of the glass on 100% of the surface and gives the paint applied a high degree of coverage.

In both cases, the glass must be heat treated in order to obtain the baking and the durability of the colour. UNION GLASS, through experience gained over time and the quality of colours and enamels used, can achieve any kind of decorated glass according to the Customer's requirements and end uses.

14

UNION GLASS PRODUCTION RANGE

We can reproduce any kind of drawing, with any type of enamel and colour. • Glass supports: all glass can accommodate the paint film

15

GLASS FOR COMMERCIAL VEHICLES AND FOR SHIP BUILDING AND RAIL SECTORS Thermally reliable, UNION GLASS products perfectly meet international quality standards.

Specific selective controls, specially designed for the elimination of imperfect toughened glass, have allowed UNION GLASS to obtain the necessary certifications and approvals for the construction of glass parts for moving vehicles.

The production of toughened glass for the shipbuilding sector, which is also tested through stringent mechanical strength tests, has been certified by various qualified bodies.

16

UNION GLASS PRODUCTION RANGE

Toughened or heat-strengthened glass: • Polygonal or shaped shape • Neutral • Enamelled • Screen printed

FIELD OF APPLICATION Railway Sector Earth Moving Sector • Ship Building Sector • •

17

PROCESSING Sophisticated and cutting edge machinery combined with highly skilled labour allows UNION GLASS to complete all flat glass processing stages in company.

These consist of:

CUT

Cutting is the preliminary operation to subsequent processing phases. Glass (6000x3210 mm), supplied by suppliers and packaged according to the type of material, is stored in the automatic stock warehouse.

Following a thorough inspection of the raw material, the cut is optimised using special software in order to minimise waste. Thus individual pieces are cut to the desired size.

GRINDING

Grinding is the process of edge transformation following the cutting of the glass.

It can be performed with different profiles or sections and with different degrees of finish tailored to specific Customer requirements (raw, glossy, flat and round).

With the latest equipment, it is possible to perform grinding on any size of sheet.

18

UNION GLASS SHAPING PROCESS

Through the use of technologically advanced numerical control machining centres, UNION GLASS can grind shaped glass of various sizes, including large sheets.

DRILLING PROCESS

Drilling is performed with special Numerical Control drills and tools of any diameter and profile (countersinking of any type).

SCREEN PRINTING

Screen printing on the glass allows a brand, writing, drawing, or other graphic element to be produced on the glass.

Image transfer occurs by passing the enamel through a mesh frame, with the aid of a spatula (squeegee), in correspondence to the pattern to be reproduced.

Once baked in a tempering oven, the colour is glazed, acquiring stability and durability over time.

19

ENAMELLING

Enamelling is obtained through the use of ceramic pigments in diluted powder, placed on the glass and fixed by baking in the tempering oven.

It can be achieved in a wide variety of colours and finishes.

20

UNION GLASS

TOUGHENED AND HST/HEAT-STRENGTHENED

Toughening is a heat treatment that improves the surface tension of glass, increasing its resistance to external stresses. This phase uses the tempering swinging oven.

The HST (Heat Soak Test), is carried out on Customer request, the test is performed after toughening and allows spontaneous breakage of toughened glass to be drastically reduced.

The test is regulated by specific European legislation and consists of keeping the toughened glass at a temperature of 290 +/- 10 째C for 2 hours, if for the duration of the test, the glass remains intact, it can be considered almost immune to the risk of spontaneous rupture.

Heat-Strengthened Glass: with the same system it is also possible to produce, for each thickness of glass required, the strengthened version.

LAMINATION

Glass lamination is obtained by assembling a number of glass layers through the application of plastic inter-layers (PVB, SG and EVA).

Laminated glass offers the best glass product which ensures safety, in terms of protection for individuals from possible injury resulting from accidental glass breakage, as well as offering protection against external actions by intruders.

21

22

S

SOLAR

Photovoltaic Technology in Architecture

LA TORRE VETRO

LA TORRE VETRO, with its over 4,000 square metre production site, is a national leader in the production of insulating glass (double glazing) for the coating of architectural buildings, curtain walls, partitions and interior glazing systems for residential buildings.

Insulating glass produced by LA TORRE VETRO can be used to: Maintain an efficient level of heat and sound insulation • Limit the sun's undesirable effects • Provide efficient protection against break-in attempts and accidental breakage • Maintain privacy •

LA TORRE VETRO primarily aims at: • Companies operating in the design, production and installation of architectural cladding and curtain walls • Door, window and shutter fitters who work in the residential, commercial and industrial sector

23

LA TORRE VETRO manufactures insulating High-Tech glass suitable for any type of building and is able to meet the main environmental requirements.

The insulating glass, also called double glazing, is made up of two or more glass layers joined together, at the perimeter, by a metal profiled spacer frame (aluminium, steel) or polymeric material and separated by a layer of air or gas.

Inside the perimeter frame, salts are inserted which prevent the formation of condensation inside the glass.

To increase thermal insulation of the glazing, Argon or Krypton gas is inserted in the air chambers and oxide layers are deposited on the inner surfaces of the glass.

SINGLE CHAMBER

INSULATING GLASS INTERNAL

coating

oxide

EXTERNAL

Reflected solar energy

Energy penetration from the outside

gas

Thermal transmittance

DOUBLE CHAMBER

Internal thermal energy

INSULATING GLASS

Reflected solar energy

Thermal transmittance

24

gas

oxide

coating

oxide

INTERNAL

coating

EXTERNAL

Energy penetration from the outside

gas Internal thermal energy

LA TORRE VETRO

LOW EMISSION INSULATING GLASS

Insulating glass with one chamber, a layer of silver is deposited on the internal surface, thus improving thermal performance without altering the transmission of light.

SOLAR PROTECTION INSULATING GLASS

Solar protection insulating glass is low emission glass that, due to a magnetron treatment, assures a higher degree of protection against the sun's heat.

SOUNDPROOFING INSULATING GLASS

Soundproofing is obtained through laminated glass layers combined with soundproofing PVB film.

LOW EMISSION INSULATING GLASS WITH DOUBLE BARRIER Obtained by joining three layers of appropriately spaced glass and the two chambers, this makes double glazing glass suitable for very cold climates.

LOW EMISSION AND SOLAR PROTECTION INSULATING GLASS WITH DOUBLE BARRIER

Obtained by joining three layers of appropriately spaced laminated glass and the two chambers, this makes double glazing glass suitable for very cold and very hot climates.

25

• Traditional insulating glass obtained with the use of sealants such as polysulphide, polyurethane or silicone (depending on the Customer’s request) • Structural insulating glass with even or cantilever glass coupling • Low emission insulating glass with Thermal Insulating Reinforcement and insertion of gas (Argon, Krypton, Sulphur Hexafluoride) • Solar protection insulating glass • Safety insulating glass • Soundproofing insulating glass • Insulating glass with screen printing and toughened glass • Insulating glass with drilled glass (routel system) • Insulating glass with Venetian blind • Fire-resistant glass

26

LOW-EMISSION INSULATING GLASS INCREASES BUILDING THERMAL INSULATION WITHOUT SACRIFICING SUNLIGHT.

LA TORRE VETRO

Low emission insulating glass is obtained using particular types of treated glass, where a layer of silver is present thus reinforcing thermal insulation properties.

The insertion of Argon or Krypton gas in the inter-space allows thermal insulation of the window itself to be further increased.

Double glazing quality is determined by the value of the thermal transmittance, which quantifies the insulation provided by the glass and is measured in W/ m2K (Watts per square metre per degree Kelvin).

A low thermal transmittance value indicates good insulation and thus the fixture's ability to retain winter heat within the room.

BENEFITS • Reduction in heat loss which is typical of traditional glass and significant heating energy cost savings • Excellent thermal insulation and more homogeneous distribution of heat throughout the rooms • Thermal insulating performance approximately six times higher than that of a single glass and three times higher than that of traditional insulating glass

27

SOLAR PROTECTION INSULATING GLASS THERMAL INSULATION, SUNLIGHT TRANSMISSION AND SOLAR PROTECTION FOR ALL SEASONS. Solar protection insulating glass is low emission insulating glass which performs the role of filtering sunlight by reducing external radiation and heat transfer indoors.

This type of glass is obtained by applying an additional selective metallic coating on the glass (magnetron) that allows the heat transmitted by solar irradiation to be filtered while ensuring excellent natural sunlight in the rooms.

Solar protection insulating glass, in addition to thermal insulation during the cold season, provides protection from external heat during summer months allowing high amounts of natural light to enter, resulting in a feeling of well-being throughout the year.

BENEFITS Dual function of thermal insulation and filtering of sunlight Significant energy saving • Greater control of light transmission • •

FIELD OF APPLICATION Glass windows or multi-storey curtain walls • External doors, windows and shutters in areas with full sun •

28

SOUNDPROOFING INSULATING GLASS EFFECTIVE SOUNDPROOFING. Soundproofing insulating glass is designed to improve sound insulation performance combining it with the comfort of thermal insulation and injury resistance safety. Obtained by assembling two or more double glazing layers of laminated glass, joined together by an inter-layer of PVB film capable of blocking and absorbing sound waves.

BENEFITS

LA TORRE VETRO

• Effective sound insulation from noise of typical high intensity urban centres (busy roads, railway lines) • Noise reduction inside buildings

FIELD OF APPLICATION • Stairwells, verandas, glass façades of buildings located in high noise areas (city centres, shopping areas, ring roads, close to stations or airports) • Glass and windows coverage for resistance to falling objects and for protection from external noise, such as pouring rain • Internal partitions

29

VENETIAN BLIND INSULATING GLASS Glass windows with Venetian blinds are obtained by fitting a Venetian blind in the double glazing cavity, keeping the blind's movement in a sealed environment, protected from dust.

The lifting and the orientation of the Venetian blind occurs through a manual or motorised mechanism.

BENEFITS Combine traditional furnishing elegance with the typical transparency of the glass The blinds always appear clean, saving the routine drudgery of cleaning and maintenance required for curtains exposed • •

30

INSULATING GLASS WITH “WARM EDGE” SPACER The term Warm Edge means thermal interaction between glass-frames and profiles on the edge of insulating glass.

LA TORRE VETRO

The use of the Warm Edge systems allows higher temperatures to be maintained on the inner edge of the glass, thus contributing to a significant energy saving and an improvement in living comfort.

Warm Edge spacers are made of stainless steel coupled with polypropylene, a high quality plastic material, which improves the mechanical properties and the thermal insulation of the profile, due to its low conductivity.

The perfect union of the two materials significantly reduces heat exchange and at the same time guarantees excellent impermeability performance against gases and moisture.

BENEFITS Low heat conductivity, therefore excellent insulating capacity Significant improvement in Uw values • Increase in the surface temperature at the internal perimeter of the glass (Warm Edge) • Significant reduction in condensation • Significant air circulation reduction near the window • Good butyl and the secondary sealant adhesion thanks to the inorganic surface of the metallic film • Excellent aesthetic finish • •

31

FIRE PROTECTION GLASS Fire protection glass is glass that forms part of the building elements approved to meet fire regulation requirements.

Composed of several glass layers separated by special intumescent gel that reacts to fire, stopping the fire's energy and keeping the rising temperature on the opposite side of the fire within the limits of the law.

PRODUCTION RANGE

Fire and smoke resistant glass Fire, smoke resistant and thermal insulating glass (prevents the passage of dangerous thermal radiation) • Class El 30, El 60, El 90, El 120 • •

FIELD OF APPLICATION Doors Partitions

• •

32

DOUBLE GLAZING PRODUCTION LINES LA TORRE VETRO has state of the art double glazing production, controlled by a computerised system. Each line can produce double and triple laminated glass, there are no limitations to size.

DOUBLE GLAZING PRODUCTION PHASES:

LA TORRE VETRO

The double glazing production cycle begins with the preparation of spacer frames. These frames are mostly made of metal profiles or others (upon Customer request) and are filled with dehydrating salts that absorb any remaining moisture.

THE SUBSEQUENT PRODUCTION PHASES INCLUDE:

Positioning the frame on the first glass sheet, which is glued as a result of the butyl that was previously spread on the interlayer, creating a barrier against moisture • Joining of two or more layers of glass which are glued to the frame and pressed to form a well balanced unit • A second sealing, to further decrease the possibility that air enters the double glazing, with the consequent formation of condensate • Insertion with the use of a special machine of inert (Argon, Krypton) gas within the insulating panel, so as to improve the thermal-noise insulation •

French windows, Venetian or other various types of blinds can be inserted into the insulating glass.

33

34

VAM, an Italian Company that for decades has specialised in glass for the furnishings and household appliance sectors, over the years has successfully SOLAR established itself in national and international markets.

Photovoltaic Technology in Architecture

S

Skill, experience and continuous innovation enable the company to achieve a variety of interior glass solutions, to better meet diverse Customer requirements.

VAM

VAM carries out all its manufacturing in the Maron di Brugnera (PN), production plant located on an area of 30,000 ​​ square metres of which 15,000 are covered.

VAM is primarily aimed at companies operating in the following sectors: Furnishings Household appliances

• •

providing quality products and attention to detail.

35

FUNCTIONALITY AND DESIGN FOR THE FURNITURE AND HOUSEHOLD APPLIANCE INDUSTRY

VAM solutions have application in multiple sectors:

GLASS FOR FURNISHING Living rooms Bedrooms • Kitchens • •

GLASS FOR BATHROOM FURNISHING Mirrors • Bathroom sinks • Stall showers •

GLASS FOR CONTRACT Window displays Cabinets • Display units • Wall coverings • •

GLASS FOR HOUSEHOLD APPLIANCES Oven doors Cooker tops • Range hoods • Refrigeration cabinets • Drink and food display cabinets • •

36

GLASS FOR FURNISHING

Available in any shape and colour, glass is the most commonly used material in the furniture industry as it blends best with current interior design trends, offering elegance and making rooms spacious and bright.

VAM

Transparent, bright and crystal clear, glass has become indispensable for the production of furniture and home furnishings. Refined and highly versatile, it characterises and enhances the design of any room, customising it and making it unique.

VAM glass furnishing products include: • Tables • Shelving • Mirrors • Wardrobe doors • Shelves • Cabinets • Display cases

37

GLASS FOR BATHROOM FURNISHING A symbol of transparency, luminosity and purity, glass is perfect for complimentary bathroom furnishings with elegant and refined design.

Due to its modern production technologies, VAM is able to create frosted, screen-printed, glazed and enamelled glass to ensure a unique and unmistakable aesthetic effect.

VAM solutions for bathroom furnishings include: • Mirrors • Stall showers • Shelving • Doors

38

GLASS FOR CONTRACT VAM produces a wide variety of glass of any shape, size and colour to meet furnishing and decorative needs for public businesses, offices, shops and the Contract sector in general.

VAM glass products can be used in an infinite range of Interior Design solutions, customised to make rooms bright, spacious and inviting.

Constant Research and Development in the company's laboratories make VAM glass products highly technological and innovative.

VAM production for the Contract sector includes: • Cabinets for shops, bars, restaurants and hotels • Glass for beauty salons • Cabinets • Office tables • Glass shelving, shelves and display cabinets • Wall coverings • Glass for lighting

VAM

GLASS FOR HOUSEHOLD APPLIANCES

VAM produces toughened, screen-printed, enamelled and lacquered glass that can be customised with company logos and symbols.

Designed and built to last and ensure the highest quality and safety, VAM glass products provide modern design in line with market trends.

The main household appliance products produced

by VAM include: • Oven doors • Range hoods • Glass for lighting • Glass for refrigeration cabinets • Glass for drink display cabinets • Push button panels 39

PROCESSING CUT

Cutting is the preliminary operation to subsequent processing phases. Glass is supplied by suppliers and packaged according to the type of material and then stored in the automatic stock warehouse.

Following a thorough inspection of the raw material, the cut is optimised using special software in order to minimise waste. Thus individual pieces are cut to the desired size.

WATER CUTTING

Water cutting is a process that allows notches or particular shapes to be made with the aid of a jet of water added to special abrasive sand, all occurring as a result of a numerical control work centre.

40

GRINDING AND SHAPING

VAM

Grinding is the process of transforming the edges following glass cutting. It can be performed with different profiles or sections and with different degrees of finish tailored to specific Customer requirements (raw, glossy, flat and round).

41

DRILLING PROCESS

Drilling is performed with special Numerical Control drills and, on Customer request, with any diameter and profile (countersinking of any type).

TOUGHENED

Toughening is a heat treatment that improves the surface tension of glass, increasing its resistance to external stresses.

This phase uses the continuous tempering oven.

ENAMELLING (BY ROLLS AND BY VEIL)

Enamelling is obtained through the use of ceramic pigments in diluted powder, placed on the glass and fixed by drying or tempering in the oven.

Glass produced with this procedure, assumes a uniform appearance. Enamelling can be performed with a roller or veil and a large variety of colours and finishes, can be accomplished, also on request.

SAFETY ENAMELLING Safety enamelling is a product that is applied like normal enamel that allows windows and mirrors to be made safe. It forms a thin film which, in the event of breakage, holds all the glass or mirror fragments, preventing dangerous cuts and injuries.

42

SCREEN PRINTING

VAM

Screen printing on the glass allows a brand, writing, drawing, or other graphic element to be produced on the glass.

Image transfer occurs by passing the enamel through a mesh frame, with the aid of a spatula (squeegee), in correspondence to the pattern to be reproduced.

Once baked in a tempering oven, the colour is glazed, acquiring stability and durability over time.

43

SERVICES VAM's main objective is the complete satisfaction of its Customers and the establishment of a relationship of mutual trust between the company and customers, who are offered specific support services and advice.

1. COMMERCIAL SUPPORT

VAM provides its Customers with a pre- and post-sales commercial support service that takes care of all requirements, ensuring a timely response within the required time-scale.

2. TECHNICAL ADVICE

VAM's technical department has a highly skilled team available to assist and support architects, engineers and furniture industries in the design of glass elements for furnishing and appliances.

Documentation regarding relevant technical data on each product and certificates for glass subject to testing are available on request.

44

VAM 3. PACKAGING

To ensure the integrity of glass during delivery, on specific Customer requirements, VAM carries out, pre-assembly with shrink wrap / cardboard / cages / crates etc. in addition to traditional packaging.

4. DELIVERY

VAM glass products are delivered throughout Europe: skilled and professional delivery staff ensure punctual delivery service ensuring maximum safety in the transportation of goods.

45

46

UNION PROJECT, the new Integrated Project Division, stems from UNION GLASS's desire to increase their skills, providing a complete service from design to the supply and production of glass, aimed at the energy enhancement of building cladding.

UNION PROJECT combines thirty years of experience gained by UNION GLASS in the manufacture of flat glass with high design professionalism.

The new division ensures its Customers extended and continuous service, beginning with the project's feasibility study and concluding with construction and testing.

The glass thus comes alive and its design follows the many facets of its use.

Representation of movements to the limit of operation

UNION PROJECT

UNION PROJECT is involved in: • Selection of glass and its treatment • Sizing and structural verification • Sizing and thermal verification • Sizing and noise verification

47

UNION PROJECT designs, sizes and verifies glass elements according to the principles of Building Science, supplemented by practical rules of design, in the Eurocode's legislative references.

The preparation of the project is carried out with a scrupulous study of the type of glass to be used for appropriate and correct use in production, combining Customer requirements with regulatory standards required.

Maximum tension to breakage for the duration of the load application less than a second

Special attention is paid to external factors acting on glass applications, factors such as seismic, wind action, snow load, etc.

Awareness during design leads to technical solutions that enable the achievement of high levels of reliability and safety.

Graphical comparison between the values ​​ k, derived from the theory LEFM (Linear Elastic Fracture Mechanics) and prEN13474-3

Broken glass pane

UNION PROJECT is not limited to the size of the individual glass, but analyses and designs the whole article, increasing quality and energy efficiency.

48

UNION GLASS S.r.l.

Registered office - Plant n째 1 Via Istria - 31045 MOTTA DI LIVENZA (TV - Italy) Tel. +39 0422 861235 - Fax +39 0422 768563 www.unionglass.it - info@unionglass.it Plant n째 2 Via Magnadola, 60 - 31045 MOTTA DI LIVENZA (TV - Italy)

LA TORRE VETRO S.r.l.

Via Pasubio, 52 - 37069 VILLAFRANCA DI VERONA (VR - Italy) Tel. +39 045 6301607 - Fax +39 045 6301767 www.latorrevetro.it - info@latorrevetro.it

VAM S.r.l.

Via Bandi, 27 - 33070 MARON DI BRUGNERA (PN - Italy) Tel. +39 0434 608012 - Fax +39 0434 623566 www.vamvetro.it - info@vamvetro.it

UNION PROJECT Integrated Project Division Via Magnadola, 60 - 31045 MOTTA DI LIVENZA (TV - Italy) Tel. +39 0422 765611 - Fax +39 0422 761021 info@unionproject.it