Telecommunications for Business Pre-Test Questions
Course Introduction
This course explores the foundational concepts and practical applications of telecommunications within modern business environments. Students will gain an understanding of the technologies and infrastructures that enable communication networks, including voice, data, and multimedia transmission. The curriculum covers important topics such as network types, telecommunications hardware and software, regulatory issues, security concerns, and evolving trends like VoIP and cloud-based communication systems. Emphasis is placed on how businesses leverage telecommunications for operational efficiency, strategic decision-making, and maintaining competitive advantage.
Recommended Textbook
Data Communications and Computer Networks A Business Users Approach 7th Edition by Curt
Available Study Resources on Quizplus
13 Chapters
1238 Verified Questions
1238 Flashcards
Source URL: https://quizplus.com/study-set/2104
Page 2
Chapter 1: Introduction to Computer Networks and Data Communications
Available Study Resources on Quizplus for this Chatper
76 Verified Questions
76 Flashcards
Source URL: https://quizplus.com/quiz/41894
Sample Questions
Q1) The application layer of the OSI model is responsible for token management.
A)True
B)False
Answer: False
Q2) The network layer of the OSI model is an end-to-end layer.
A)True
B)False
Answer: False
Q3) Data is information that has been translated into a form that is more conducive to storage, transmission, and calculation.
A)True
B)False
Answer: True
Q4) The Internet "talks" only ____, so users must use software that supports this protocol.
A)IPX/SPX
B)DSL
C)TCP/IP
D)FTP
Answer: C
To view all questions and flashcards with answers, click on the resource link above. Page 3
Chapter 2: Fundamentals of Data and Signals
Available Study Resources on Quizplus for this Chatper
100 Verified Questions
100 Flashcards
Source URL: https://quizplus.com/quiz/41895
Sample Questions
Q1) ____________________ is the opposite of attenuation.
Answer: Amplification
Q2) The set of all textual characters or symbols and their corresponding binary patterns is called a(n) ____________________.
Answer: data code
Q3) Attenuation in a medium such as copper wire is a logarithmic loss and is a function of distance and the resistance within the wire.
A)True
B)False
Answer: True
Q4) The frequency range of the average human voice usually goes no lower than 300 Hz and no higher than approximately ____ Hz.
A)2200
B)2400
C)3400
D)5300
Answer: C
Q5) The ____________________, or time interval, of one cycle is called its period. Answer: length
To view all questions and flashcards with answers, click on the resource link above. Page 4
Chapter 3: Conducted and Wireless Media
Available Study Resources on Quizplus for this Chatper
103 Verified Questions
103 Flashcards
Source URL: https://quizplus.com/quiz/41896
Sample Questions
Q1) ____ twisted pair was designed to transmit 20 Mbps of data for distances up to 100 meters.
A)Category 1
B)Category 3
C)Category 4
D)Category 5
Answer: C
Q2) ____________________ twisted pair was designed to transmit 100 Mbps of data for distances up to 100 meters.
Answer: Category 5 CAT 5
Q3) ____ cable is a thin glass cable, a little thicker than a human hair, surrounded by a plastic coating.
A)Single-stranded coaxial
B)Fiber-optic
C)Braided coaxial
D)CAT 7
Answer: B
Q4) Multimode fiber-optic cable is labeled ____________________ cable. Answer: 62.5/125
To view all questions and flashcards with answers, click on the resource link above. Page 5
Chapter 4: Making Connections
Available Study Resources on Quizplus for this Chatper
79 Verified Questions
79 Flashcards
Source URL: https://quizplus.com/quiz/41897
Sample Questions
Q1) When using peripherals that are designed with a USB connector, it is also possible to connect one USB peripheral to another.
A)True
B)False
Q2) A(n) ____________________ connection is a special kind of data link connection used to support various types of real-time applications.
Q3) An EIA-232F interface is a full-duplex connection.
A)True
B)False
Q4) Mainframe computers use polling to send or collect data with workstations. How does polling work, and what other more recently created protocols use polling?
Q5) The technique of connecting a device to each subsequent device (instead of back to the computer) is known as ____________________.
Q6) If control simplicity is your primary goal, point-to-point connection of terminals is clearly superior to multipoint connections.
A)True
B)False
To view all questions and flashcards with answers, click on the resource link above.
Page 6
Chapter 5: Making Connections Efficient: Multiplexing and Compression
Available Study Resources on Quizplus for this Chatper
96 Verified Questions
96 Flashcards
Source URL: https://quizplus.com/quiz/41898
Sample Questions
Q1) How does time division multiplexing work?
Q2) The inability of a single fiber-optic line to meet users' needs is called ____________________.
Q3) ____________________, transmits data only from active users and does not transmit empty time slots.
Q4) Multiplexing is a technique typically performed at the network access layer of the TCP/IP protocol suite. A)True B)False
Q5) In Stat TDM, the ____________________, provides information that the receiving multiplexor can use to detect transmission errors within the frame.
Q6) One of the more common and simpler examples of lossless compression is ____________________-length encoding.
Q7) Synchronous Optical Network (SONET) and ____________________, are powerful standards for multiplexing data streams over a single medium.
Q8) Each STS level supports a particular data rate and is supported by a physical specification called a(n) ____________________.
To view all questions and flashcards with answers, click on the resource link above. Page 7
Chapter 6: Errors, Error Detection, and Error Control
Available Study Resources on Quizplus for this Chatper
75 Verified Questions
75 Flashcards
Source URL: https://quizplus.com/quiz/41899
Sample Questions
Q1) In a stop-and-wait error control system, a receiver may acknowledge multiple packets with a single ACK.
A)True
B)False
Q2) Typically, impulse noise is a(n) ____ burst of energy.
A)digital
B)analog
C)binary
D)logical
Q3) How does frame relay control errors?
Q4) White noise is also called thermal noise or ____ noise.
A)crosstalk
B)jitter
C)Gaussian
D)spike
Q5) If jitter becomes too great, correcting it can require the transmitting devices to speed up their transmission rates.
A)True
B)False
Q6) How does longitudinal parity work?
To view all questions and flashcards with answers, click on the resource link above. Page 8
Chapter 7: Local Area Networks: Part I
Available Study Resources on Quizplus for this Chatper
99 Verified Questions
99 Flashcards
Source URL: https://quizplus.com/quiz/41900
Sample Questions
Q1) A(n) ____ protocol is the software that allows a workstation to place data onto a local area network.
A)error control
B)noise control
C)medium access control
D)flow control
Q2) One of the most common standards for broadband (analog) Ethernet was the ____________________ specification.
Q3) One of the more interesting applications for a dedicated segment network and a switch is creating a ____.
A)virtual LAN
B)dedicated LAN
C)shared LAN
D)local LAN
Q4) ____________________ was designed to support 100-Mbps baseband signals using two pairs of Category 5 unshielded twisted pair.
Q5) How does a star-wired bus topology work?
Q6) What are some of the application areas where a LAN can be an effective tool?
Q7) Explain the switch filtering function.
To view all questions and flashcards with answers, click on the resource link above. Page 9
Chapter 8: Local Area Networks: Part II
Available Study Resources on Quizplus for this Chatper
113 Verified Questions
113 Flashcards
Source URL: https://quizplus.com/quiz/41901
Sample Questions
Q1) ____ is an intelligent system that authenticates users and includes a distributed database of information about every application, user, server, and resource on a network.
A)NetWare Directory Services (NDS)
B)Active Directory
C)LDAP
D)X.509
Q2) ____________________ software is designed to scan an IP address or range of IP addresses for any type of security weakness.
Q3) A(n) ______________________________ is a large, complex program that can manage the common resources on most local area networks.
Q4) A modern operating system must provide various levels of operating system ____, including directory and file security, memory security, and resource security.
A)size
B)memory
C)security
D)space
Q5) What are the four steps for creating a good and appropriate tree design?
To view all questions and flashcards with answers, click on the resource link above. Page 10
Chapter 9: Introduction to Metropolitan Area Networks and
Wide Area Networks
Available Study Resources on Quizplus for this Chatper
101 Verified Questions
101 Flashcards
Source URL: https://quizplus.com/quiz/41902
Sample Questions
Q1) A(n) ____________________ is a device that allows one or more stations to access the physical network and is a transfer point for passing information through the network.
Q2) MANs are almost exclusively ____ networks, and thus capable of supporting data rates into the tens of millions and hundreds of millions of bits per second.
A)fiber-optic
B)copper-wired
C)twisted-paired
D)coaxial-cabled
Q3) Any network is as strong as its strongest link.
A)True
B)False
Q4) ____ are advertised as networks with very low error rates and extremely high throughput.
A)PANs
B)UANs
C)GANs
D)MANs
Q5) What are the problems associated with network congestion?
To view all questions and flashcards with answers, click on the resource link above. Page 11
Chapter 10: The Internet
Available Study Resources on Quizplus for this Chatper
100 Verified Questions
100 Flashcards
Source URL: https://quizplus.com/quiz/41903
Sample Questions
Q1) The ____________________ provides a connectionless data transfer service over heterogeneous networks by passing and routing IP datagrams.
Q2) To transfer Web pages, the Internet uses the ____.
A)Telnet
B)Hypertext Transfer Protocol (HTTP)
C)e-commerce
D)Network Address Translation (NAT)
Q3) The ____ is an Internet protocol for sending and receiving e-mail and is used to perform the transfer.
A)Address Resolution Protocol (ARP)
B)Simple Mail Transfer Protocol (SMTP)
C)File Transfer Protocol (FTP)
D)Transport Control Protocol (TCP)
Q4) Intranets use essentially the same hardware and software that is used by other network applications.
A)True
B)False
Q5) How does the Internet Protocol work?
Q6) How does NAT work?
To view all questions and flashcards with answers, click on the resource link above. Page 12
Chapter 11: Voice and Data Delivery Networks
Available Study Resources on Quizplus for this Chatper
97 Verified Questions
97 Flashcards
Source URL: https://quizplus.com/quiz/41904
Sample Questions
Q1) When a VCC transmits user-to-network control signaling, the connection is called the _________________________.
Q2) ____________________ lines and tie lines are leased telephone lines that require no dialing.
Q3) Before ATM can transfer any data, you must first create a logical connection called a ____.
A)virtual path connection (VPC)
B)virtual channel connection (VCC)
C)network-network interface
D)network-user interface
Q4) The ____ allows the customer to exceed the committed information rate by a fixed amount for brief moments of time.
A)bit rate
B)burst rate
C)committed information rate (CIR)
D)LATA rate
Q5) After the 1984's Modified Final Judgment, the local telephone companies became known as ______________________________.
Q6) How does a 56k dial-up modem work?
Page 13
To view all questions and flashcards with answers, click on the resource link above.
Chapter 12: Network Security
Available Study Resources on Quizplus for this Chatper
100 Verified Questions
100 Flashcards
Source URL: https://quizplus.com/quiz/41905
Sample Questions
Q1) A ____ virus is usually stored on some form of removable media. When the removable media (such as a flash drive) is connected to a new machine and is used to boot the machine, the virus moves from the media into the host system.
A)polymorphic
B)macro
C)boot sector
D)file infector
Q2) In ____, a Web user seeking to visit a particular company's Web site is unknowingly redirected to a bogus Web site that looks exactly like that company's official Web site.
A)smurfing
B)pharming
C)worming
D)e-mail bombing
Q3) A digital certificate, or simply a(n) ____________________, is an electronic document, similar to a passport, that establishes your credentials when you are performing transactions on the World Wide Web.
Q4) ____________________ define the network resources that a user or set of users can access.
To view all questions and flashcards with answers, click on the resource link above.
14
Chapter 13: Network Design and Management
Available Study Resources on Quizplus for this Chatper
99 Verified Questions
99 Flashcards
Source URL: https://quizplus.com/quiz/41906
Sample Questions
Q1) One of the most popular and successful plans currently used by businesses today is the ____.
A)network cycle
B)software-network cycle
C)systems development life cycle (SDLC)
D)distributed cycle
Q2) To examine the nodes in a wide area connectivity map in more detail, an analyst can expand each individual site into a ____ area connectivity map.
A)personal
B)local
C)world
D)universal
Q3) The advantage of analytical modeling is that it is extremely difficult to create inaccurate analytical models and thus generate results that are invalid.
A)True
B)False
Q4) In a payback analysis, the ____________________ row reflects the total costs for each year times the present value of a dollar for that year.
To view all questions and flashcards with answers, click on the resource link above. Page 15