Carpentry Apprenticeship Program
Exam Questions
Course Introduction
The Carpentry Apprenticeship Program offers comprehensive training for individuals pursuing a career in carpentry, blending theoretical instruction with practical, hands-on experience. Students learn essential skills such as blueprint reading, framing, formwork, finishing techniques, safety protocols, and the use of various tools and materials. The program emphasizes industry standards, workplace safety, teamwork, and problem-solving, preparing apprentices to work efficiently and effectively on residential, commercial, and industrial construction sites. Upon completion, graduates are equipped with the foundational knowledge and technical proficiency required for journeyman status and further advancement in the carpentry trade.
Recommended Textbook
Residential Construction Academy Carpentry 4th Edition by Floyd Vogt
Available Study Resources on Quizplus
20 Chapters
600 Verified Questions
600 Flashcards
Source URL: https://quizplus.com/study-set/2142 Page 2
Chapter 1: Hand Tools
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42665
Sample Questions
Q1) A ____ is 1/100 of a meter.
A)micron
B)millimeter
C)centimeter
D)decimeter
Answer: C
Q2) A ____ knife is a universal cutting tool.
A)flexible
B)Bowie
C)utility
D)Swiss
Answer: C
Q3) The wood ____ is used to cut recesses in wood for things such as door hinges and locksets.
A)hatchet
B)bevel
C)chisel
D)saw
Answer: C
To view all questions and flashcards with answers, click on the resource link above.
Page 3
Chapter 2: Hand Power Tools
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42666
Sample Questions
Q1) The size of a portable electric circular saw is determined by the diameter of the blade.
A)True
B)False
Answer: True
Q2) The guard of a circular saw should never be retracted by hand.
A)True
B)False
Answer: False
Q3) ____-actuated drivers are used to drive specially designed pins into masonry or steel.
A)Pneumatic
B)Powder
C)Battery
D)Hand
Answer: B
Q4) __________ cutting is done by rotating a tool base so the spinning blade cuts into the material.
Answer: Plunge
To view all questions and flashcards with answers, click on the resource link above. Page 4
Chapter 3: Stationary Power Tools
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42667
Sample Questions
Q1) A good safety habit is to adjust the table saw blade to about __________.above the stock.
Answer: 1/4 inch
Q2) When operating a table saw, proper feed rate is determined by listening to the blade speed.
A)True
B)False
Answer: True
Q3) The size of a table saw is determined by the ____ of the saw blade.
A)diameter
B)metal
C)teeth
D)kerf
Answer: A
Q4) The cutting operation that cuts wood with the grain is called __________.
Answer: ripping
Q5) The term used to describe cutting boards into thinner pieces is called __________.
Answer: resaw
To view all questions and flashcards with answers, click on the resource link above. Page 5
Chapter 4: Wood and Wood Products
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42668
Sample Questions
Q1) Traditional lumber processes typically convert ____ percent of a log to structural solid lumber.
A)40
B)60
C)75
D)90
Q2) ____ strand lumber has been engineered to replace large dimension lumber (beams, planks, and posts).
A)Transverse
B)Lateral
C)Parallel
D)Cross
Q3) ____ is the process of restacking lumber on small cross-sticks that allow air to circulate between the pieces.
A)Aerating
B)Sticking
C)Layering
D)Piling
To view all questions and flashcards with answers, click on the resource link above.
6
Chapter 5: Fasteners
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42669
Sample Questions
Q1) ____ adhesive is used to apply wall paneling, foam insulation, gypsum board, and hardboard to wood, metal, and masonry.
A)Construction
B)Panel
C)Household
D)Outdoor project
Q2) ____ nails are made from hardened steel to prevent them from bending when being driven into concrete or other masonry.
A)Masonry
B)Duplex
C)Brad
D)Roofing
Q3) Hollow wall expansion anchors are commonly called winged toggle bolts.
A)True
B)False
Q4) Toggle bolts may also be use on solid masonry walls.
A)True
B)False
To view all questions and flashcards with answers, click on the resource link above.
Page 7
Chapter 6: Building Plans and Codes
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42670
Sample Questions
Q1) Any hardships imposed by zoning regulations may be relieved by a(n) ____.
A)waiver
B)exception
C)variance
D)permit
Q2) ____ are views of the structure as viewed from above.
A)Plans
B)Elevations
C)Sections
D)Aerials
Q3) The dimensions of a building and their location on a site are determined from information in the ____ plan.
A)lot
B)zoning
C)foundation
D)plot
Q4) An architect designs buildings and creates drawings to reflect those designs.
A)True
B)False
Q5) Before a certificate of occupancy is issued a __________ inspection is required.
Page 8
To view all questions and flashcards with answers, click on the resource link above.
Chapter 7: Building Layout
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42671
Sample Questions
Q1) What is the diagonal of a rectangle that measures 36'x 48'?
Q2) A typical rectangular building with a deep foundation will need __ batter boards. A)4
B)8
C)12
D)16
Q3) Measurements for building layout should follow the slope of the site.
A)True
B)False
Q4) A ____ is a point of designated elevation that is accessible at all times during the construction.
A)target
B)baseline
C)reference
D)benchmark
Q5) If a rectangle has equal lengths, equal widths, and equal __________, then the layout is said to be square.
Q6) Convert 35.9685734' to feet-inches to the nearest sixteenth.
Q7) Plumbing down from batter board strings is done to locate the __________.
Page 9
To view all questions and flashcards with answers, click on the resource link above.
Chapter 8: Concrete Form Construction
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42672
Sample Questions
Q1) The purpose of a(n) ____ is to provide a lock between the footing and the foundation wall.
A)groove
B)channel
C)keyway
D)interface
Q2) Precast concrete foundations sections are set by a crane and then bolted together.
A)True
B)False
Q3) Metric rebars are measured in ____.
A)millimeters
B)centimeters
C)decimeters
D)meters
Q4) A combined slab and foundation/footing is called a ____.
A)slab-on-grade
B)complex slab
C)joint slab
D)monolithic slab
To view all questions and flashcards with answers, click on the resource link above. Page 10
Chapter 9: Floor Framing
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42673
Sample Questions
Q1) Platform framing is done with long studs that rest on the foundation sill plate.
A)True
B)False
Q2) Lumber shrinks most along its length.
A)True
B)False
Q3) Joists lapped on top of a girder must be cut to length.
A)True
B)False
Q4) The platform frame, sometimes called the ____ frame, is most commonly used in residential construction.
A)northern
B)eastern
C)western
D)southern
Q5) ____ is used over joists to form a working platform.
A)Subflooring
B)A scratch coat
C)Grading
D)Cross-bridging
To view all questions and flashcards with answers, click on the resource link above. Page 11
Chapter 10: Wall and Ceiling Framing
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42674
Sample Questions
Q1) Metal furring may be used on ceilings and walls by applying them at ____ angles to joists or studs.
A)obtuse
B)acute
C)right
D)variable
Q2) The top and bottom horizontal members of a wall frame are called ____.
A)jacks
B)trimmers
C)plates
D)sills
Q3) ____ is installed to provide support for parts of the structure, weather-tightness, and draftstopping.
A)Sealing
B)Blocking
C)Jamming
D)Wedging
Q4) Rough openings always have load bearing headers above them.
A)True
B)False
To view all questions and flashcards with answers, click on the resource link above. Page 12
Chapter 11: Scaffolds, Ladders, and Sawhorses
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42675
Sample Questions
Q1) If the frame sections are 5 * 7, a rolling tower can be only ____ feet high.
A)5
B)10
C)15
D)20
Q2) According to the U.S.Occupational Safety and Health Administration (OSHA), employers are required to have a ____ to supervise and direct scaffold erection.
A)municipal inspector
B)competent person
C)project manager
D)state overseer
Q3) Guardrails are installed on all open sides and ends of scaffolds that are more than ____ feet in height.
A)4
B)6
C)8
D)10
To view all questions and flashcards with answers, click on the resource link above.
13
Chapter 12: Roof Framing
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42676
Sample Questions
Q1) Valley rafters are more similar than they are different to hip rafters..
A)True
B)False
Q2) Step-off method for laying out rafters is fastest and most accurate method.
A)True
B)False
Q3) The amount of rafter shortening is always measured at ____ degree angles to the plumb cut.
A)45
B)60
C)90
D)135
Q4) The shed roof slopes in only one direction.
A)True
B)False
Q5) Gable studs have a common difference in length.
A)True
B)False
To view all questions and flashcards with answers, click on the resource link above. Page 14
Chapter 13: Windows and Doors
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42677
Sample Questions
Q1) ____ are square edge pieces of stock to which door stops are applied.
A)Casings
B)Jambs
C)Thresholds
D)Headers
Q2) ____ windows have a curved top or head that make them well suited to be joined in combination with a number of other types of windows or doors.
A)Elliptical
B)Arch
C)Oval
D)Circular
Q3) ____ is used to designate a type of glazing that reflects heat back into the room in winter and blocks heat from entering in the summer.
A)High resistance
B)Low conductivity
C)Low emissivity
D)High convection
To view all questions and flashcards with answers, click on the resource link above. Page 15
Chapter 14: Roofing
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42678
Sample Questions
Q1) Asphalt products are the most commonly used roof covering for residential construction.
A)True
B)False
Q2) Flashing is a building material used to make watertight joints at roof intersections.
A)True
B)False
Q3) Fiberglass shingles have a base made of a heavy asphalt-saturated paper felt.
A)True
B)False
Q4) Recommended maximum exposures of asphalt shingles to weather range from 4 to ____ inches.
A)6
B)8
C)10
D)12
Q5) Sixty pound (60#) felt covers more roof area per roll than 15# felt.
A)True
B)False
To view all questions and flashcards with answers, click on the resource link above. Page 16
Chapter 15: Siding and Decks
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42679
Sample Questions
Q1) The finished member on the underside of the cornice is the plancier, often referred to as a(n) ____.
A)F-channel
B)wall sheathing
C)finished fascia
D)soffit
Q2) Lookouts may be installed at every rafter or spaced ____ inches OC (on center), depending on the material being used for the soffit.
A)12
B)24
C)36
D)48
Q3) The ____ is a horizontal framing member fastened to the rafter tails.
A)ledger
B)subfascia
C)lookout
D)undersill trim
Q4) Fiber-cement siding has excellent decay and termite resistance.
A)True
B)False
Page 17
To view all questions and flashcards with answers, click on the resource link above.
Chapter 16: Insulation and Ventilation
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42680
Sample Questions
Q1) If insulation looks neat it is mostly installed correctly.
A)True
B)False
Q2) A(n) ____-value indicates a material's ability to resist heat transfer.
A)D
B)L
C)R
D)Z
Q3) Water vapor tends to condense onto warmer surfaces.
A)True
B)False
Q4) Air-insulation dams are installed to protect the insulation from ____.
A)air infiltration
B)water vapor
C)corrosion
D)fire
Q5) The fact that heat energy tends to migrate to cold is an example of __________.
Q6) The material installed above fiberglass insulation at the eave to allow air movement is called __________.
Q7) Ventilation removes condensation by a process called __________.
To view all questions and flashcards with answers, click on the resource link above. Page 18
Chapter 17: Wall Finish
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42681
Sample Questions
Q1) A drywall board best suited for bathrooms is _____ boards.
A)MR
B)Type X
C)veneer base
D)regular
Q2) Horizontal application of board paneling requires blocking to be installed between the studs.
A)True
B)False
Q3) Drywall panels come in thickness that range from 1/4 to 1 inch.
A)True
B)False
Q4) To help prevent nail popping and cracking due to structural stresses where walls and ceilings meet, the ____ method of drywall application is used.
A)single nailing
B)double nailing
C)floating angle
D)screw attachment
Q5) Installing drywall to the ceiling is made easier with the use of a __________.
To view all questions and flashcards with answers, click on the resource link above. Page 19
Chapter 18: Interior Finish
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42682
Sample Questions
Q1) ____ ceilings provide space for recessed lighting, ducts, pipes, and other necessary conduits.
A)Concave
B)Suspended
C)Coffered
D)Beam
Q2) Head casing length is a little more than the door width plus two casing widths.
A)True
B)False
Q3) ____ grades of pecan flooring contain all heartwood.
A)Clear
B)Red
C)Select
D)Common
Q4) Door ____ are moldings applied around the door opening.
A)casings
B)jambs
C)sills
D)sashes
To view all questions and flashcards with answers, click on the resource link above. Page 20
Chapter 19: Stair Framing and Finish
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42683
Sample Questions
Q1) The desired headroom must be known to calculate the stairwell length.
A)True
B)False
Q2) The layout of an open (or mitered) stringer is similar to that of a ____.
A)riser
B)stair carriage
C)tread
D)landing
Q3) The thickness of a preacher must be the same as the ____ stock.
A)run
B)tread
C)carriage
D)riser
Q4) If the total rise is 57" for a set of stairs the largest possible unit rise is 7 1/8".
A)True
B)False
Q5) A rosette may not be used to end the handrail against a wall.
A)True
B)False
To view all questions and flashcards with answers, click on the resource link above. Page 21
Chapter 20: Cabinets and Countertops
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42684
Sample Questions
Q1) The leaves of a ____ hinge are set into gains in the edges of the frame and the door, in the same manner as for entrance doors.
A)butt
B)counter-flap
C)coach
D)tee
Q2) ____ fill small gaps in width between wall and base units when no combination of sizes can fill the existing space.
A)Supplementary pieces
B)Face panels
C)Open shelves
D)Filler pieces
Q3) Cabinet doors styles are flush, overlay and lipped.
A)True
B)False
Q4) Shimming the base cabinets eliminates the need for a molding.
A)True
B)False
To view all questions and flashcards with answers, click on the resource link above. Page 22