Mumbles

MM550

20 2 2 U PDATE S

Moving with the times, for 2022 we have decided to continue using our 2020 carbon balanced brochures to avoid any waste of paper materials.

There are a few changes to make you aware of, listed in this mailer for your ease.

MM061 PRINTME ECO POLAR BEAR NEW 2022

SEE THE FULL RANGE OF MM060 PRINTME STYLES, MADE WITH A FLATTER FUR PILE ON THE TUMMY FOR DIRECT VINYL AND SUBLIMATION PRINTING.

HIGHLAND COW NEW 2022

STEP 1

CHOOSE YOUR PRINTME ANIMAL FROM THE COLLECTION

STEP 2

VINYL OR SUBLIMATE ME PLATE ME UP

SUBLIMATE ME 1. SUBLIMATION works on all of the MM060 PRINTME styles.

2. Once the design has been printed, tear around the edges of the sublimation paper to avoid impressions being made on the fur.

3. Place protection paper on top of the design to protect the fur.

In addition, place a piece of suitable fabric over the animal to avoid the pile flattening.

4. Heat the press to 185°C and press for 60 seconds, if you are using additional fabric to protect the pile, press for 90 seconds as the fabric will absorb the heat.

5. Remove the protection and peel off the sublimation paper.

PINK TEDDY

BLUE TEDDY

SLOTH

REINDEER

NEW 2022

NEW 2022

KOALA

KANGAROO

NEW 2022

NEW 2022

STEP 3 ENJOY

VINYL PRINT ME 1. VINYL works on all of the MM060 PRINTME styles, a vinyl with a thicker adhesive e.g a flock or glitter has the best results.

LAMB

NEW 2021

NEW 2021

PENGUIN

ELEPHANT

CAT

WHITE TEDDY

WHITE BUNNY

GIRAFFE

LION

UNICORN

NEW 2022

NEW 2022

TEDDY

RAINBOW BEAR NEW 2021

NEW 2021

GREY BUNNY

OWL

NEW 2021

2. Place protection paper on top of the design to protect the fur. In addition, place a piece of suitable fabric over the animal to avoid the pile flattening.

3. Heat the press to 185°C and press for 15 seconds, if you are using additional fabric to protect the pile, press for 30 seconds as the fabric will absorb the heat.

4. Peel off the vinyl backing and return the protection paper before re-pressing for a further 15 seconds to seal the design.

*Above are suggested methods of decorating, requirements may vary depending on the model and type of equipment you are using.

NEW 2021

NEW 2021

MM574 NEW 2022

MM575 NEW 2022

MM572 NEW 2022

MM576 NEW 2022

MM573 NEW 2021

SEE THE FULL RANGE OF ZIPPIE STYLES, MADE WITH A ZIP AROUND THE TOY BASE AND REMOVABLE STUFFING FOR DIRECT DECORATION.

STEP 2

MM050 WHITE

STEP 1

UNZIP AND REMOVE THE STUFFING FROM YOUR ZIPPIE

EMBROIDER ME FRAME ME UP

EMBROIDER ME 1. EMBROIDERY works on all Zippies with a professional finish.

2. Frame size 15-18cm will fit most of our Zippies. Square or circular will suit.

SUBLIMATE OR VINYL PRINT ME PLATE ME UP

MM050 GREY

MM051

MM052

STEP 3

RETURN THE INNER STUFFING AND ZIP ME BACK UP

PRINT ME

MM053

MM550 NEW 2021

MM054

MM555

MM556 WHITE

1. SUBLIMATION works on all Zippies with a light coloured tummy.

2. Place protection paper on top of the design to protect the fur. In addition, place a piece of suitable fabric over the animal to avoid the pile flattening.

3. Use a sheet of backing underneath the animal to stabalise the fur.

3. Heat the press to 185°C and press for 60 seconds, if you are using additional fabric to protect the pile, press for 90 seconds as the fabric will absorb the heat.

4. Use a sheet of aquafilm on top of the animal to let your stitches stay proud and not sink into the fur.

1. VINYL works on all Zippies, a vinyl with a thicker adhesive e.g a flock or glitter has the best results.

5. Make sure your Zippie is positioned straight, a laser needle will help. Alternatively, mark up a peice of a tape with a + to line up and remove before sewing.

2. Place protection paper on top of the design to protect the fur. In addition, place a piece of suitable fabric over the animal to avoid the pile flattening.

MM556 PINK

MM556 BLUE

MM558

MM561

MM564

MM563

MM559

MM560

3. Heat the press to 185°C and press for 15 seconds, if you are using additional fabric to protect the pile, press for 30 seconds as the fabric will absorb the heat.

*Above are suggested methods of decorating, requirements may vary depending on the model and type of equipment you are using.

MM567

MM568

MM569

MM565

MM570

MM566

MM571

NEW 2021/2022 SIZE GUIDE

NEW 2022 Animal Blanket

PRINTME MINI CAT HEIGHT

M 30

NEW 2022

MM572

ZIPPIE SLOTH HEIGHT

L 42

NEW 2021

PRINTME MINI PENGUIN HEIGHT

M 24

NEW 2021

MM573

MM751

ZIPPIE CHRISTMAS BEAR HEIGHT

L 35

NEW 2021

PRINTME MINI RAINBOW BEAR HEIGHT

M 28

NEW 2022

MM574

One Size / L

ZIPPIE KOALA BEAR HEIGHT

L 43

NEW 2021

PRINTME MINI REINDEER HEIGHT

M 32

NEW 2022

MM575

ZIPPIE KANGAROO HEIGHT

L 38

NEW 2021

PRINTME MINI TEDDY HEIGHT

M 30

NEW 2022

MM576

ZIPPIE LAMB HEIGHT

L 42

NEW 2021

PRINTME MINI WHITE TEDDY HEIGHT

M 30

NEW 2022

MM751

ANIMAL BLANKET HEIGHT WIDTH

L 77 77

NEW 2022

PRINTME MINI PINK TEDDY HEIGHT

M 23

NEW 2022

PRINTME MINI BLUE TEDDY HEIGHT

M 23

NEW 2022

PRINTME MINI HIGHLAND COW HEIGHT

M 23

NEW 2022

PRINTME MINI KOALA BEAR HEIGHT

M 26

NEW 2022

PRINTME MINI KANGAROO HEIGHT

M 23

NEW 2022

PRINTME MINI LAMB HEIGHT

M 23

NEW 2022

PRINTME MINI SLOTH HEIGHT

M 23

NEW 2021

MM060

All sizes measured in cm.

77x77cm

MM565/MM060

MM574/MM060/MM575/MM060

MM061

NEW 2022

MM061

PRINTME MINI ECO POLAR BEAR HEIGHT

M 2

NEW 2021

MM550

GIANT ZIPPIE BUNNY

XL 65

MM574/MM060/MM575/MM060

All styles comply to EN71 Toy Saftey regulations and present CE markings on all labels, this means that the toys undergo rigerous testing to ensure that the products are safe for the use of children and free from choking hazards- all Printme’s and Zippies are sutiable for all ages. These test results can be shared on request.

DISCONTINUED STYLES: MM011 MM090 MM557 MM562

DISCONTINUED COLOURS: MM003: BABY BLUE & BABY PINK

Scan h ere to v i ew o ur 20 22 M um b l e s re s o u rc e s .