PSG Covid-19 Face Shield • 11 x 12" • Infection-Control • MADE in USA • LATEX-FREE

HEALTHCARE SUPPLY OF PERSONAL PROTECTIVE EQUIPMENT (PPE) As the COVID-19 pandemic continues and demand for PPE dramatically increases, hospitals and healthcare facilities are looking for alternative suppliers of medical equipment designed to reduce transmission of the coronavirus.

Infection-Control Face Shields offer a reliable, affordable protective barrier for doctors, nurses, and COVID-19 patients.

These are key pieces of PPE used by front-line healthcare staff to defend against virus-containing droplets that are spread by infected patients through coughing and sneezing.

Proudly manufactured in the USA from recyclable PET, every latex-free face shield purchase avoids layoffs and ensures factories across our country remain open for business!

Performance Safety Group is committed to SAVING JOBS and SAVING LIVES by supporting those on the front lines.

COVID-19

FACE SHIELD INFECTION-CONTROL

COVID-19

FACE SHIELD INFECTION CONTROL

COVID-19 FACE SHIELD INFECTION CONTROL LATEX Lightweight, affordable face protection against droplets, dust and light particles • 12 x 14” design delivers extended facial coverage • Polyester Velcro headband is ultrasonically welded to secure • PET is bendable, yet sturdy, and virtually unbreakable • Defends against harmful fluid splashes and spray • Transparent for optically clear, peripheral vision • Fits comfortably over glasses and goggles • Meets ANSI/ISEA Z.87.1-2020 standard • • FFS-1214 / One size / Sold by-the-case / 100 units

Face Sh i el d s: Provide barrier protection to the facial area and related mucous membranes (eyes, nose, lips) and are considered an alternative to goggles.

Face shields are not meant to function as primary respiratory protection and should be used concurrently with a medical mask (for droplet precautions) or a respirator (for airborne precautions) if aerosol-generating procedure is performed. They should cover the forehead, extend below the chin and wrap around the side of the face. Face shields are available in both disposable and reusable options.

Reprocessing and reusing disposable face shields for one HCW to use on multiple patients with COVID-19 for a limited time-period (multiple shifts).

Technical Data:

EQUIPMENT TYPE

Disposable Face Shield

REPROCESSING STEPS

CONSIDERATIONS &

DISINFECTANT PRODUCT OPTIONS

ADDITIONAL GUIDANCE

1. Carefully wipe the inside and then the outside

Chlorine-based disinfectant (0.1% chlorine

The emphasis of reprocessing

of the visor using a clean cloth saturated with

solution) recommended over alcohol, as

should be on the outside of the

neutral detergent solution, rinse if needed.

alcohol may damage and discolor plastic and

visor.

2. Carefully wipe the outside of the visor using a

deteriorate glues over time; note that it may

clean cloth or wipe saturated with hospital disinfectant solution; be sure it remains wet for

also remove anti-glare and anti-fogging properties of the face shield.

be tolerant to disinfectants.

the required contact time.

3. Wipe the outside of visor with clean water to

See guidance on how to prepare 0.1%

remove residue.

chlorine solution.

4. Fully dry (air dry or use absorbent towels). towels).

Carefully avoid the foam cushion and elastic strap as they may not Note: If reprocessing disposable face shields on a time-limited basis, they should be dedicated to one HCW.

• This product has been authorized by FDA under an EUA for use by healthcare providers as personal protective equipment.

• This product is only authorized for the duration of the declaration that circumstances justifying the authorization of emergency use under Section 564(b)(1) of the Act, 21 USC 360bbb-3(b)(1) unless theauthorization is terminated or revoked sooner.

• Meets Class I or Class II flammability requirement per 16 CFR 1610 PerformanceSafetyGroup

I

877.PSG.4568

I

PSGgear.com

COVID-19

FACE SHIELD INFECTION CONTROL

PerformanceSafetyGroup

I

877.PSG.4568

I

PSGgear.com

ESSENTIAL COVID-19 PPE PSG Infection Control Face Shields are designed to protect healthcare workers’ eyes and face from bodily fluids, liquid splashes, or potentially infectious materials and necessary in their fight to reduce the spread of the coronavirus.

SUSTAINABLE PACKAGING PSG boxes are not just 100% recycled - they are made from 95% post-consumer content - and are manufactured right here in the United States.

TRUSTED GOVT SUPPLIER Since the COVID-19 outbreak, we have distributed 5 million face shields to countless healthcare facilties and federal, state, city and county government agencies, including NY and LA.

GIVING BACK To date, PSG has donated over 5,000 face shields and other personal protective equipment items to aid those on the frontlines battling the coronavirus.

MANUFACTURED IN THE USA Our face shields are created with 100% U.S. made components and ensure over 500 manufacturing and assembly jobs for Americans.

Our ISO 9001certified factories have the ability to produce over 175,000 daily and approximately 16,000,000 in 90 days!

EFFICIENT SUPPLY CHAIN Domestic logistic companies and their drivers not only benefit when U.S. made products are purchased, but ensure orders are consistently delivered in a timely manner. Meanwhile, Chinese made knock offs take over 30 days just to reach U.S. soil.

1” SOFT NEOPRENE FOAM FOREHEAD PADDING FOR LONG-TERM COMFORT

EXTENDED FACIAL COVERAGE PROTECTION AGAINST BODY FLUIDS, LIQUID SPLASHES OR OTHER POTENTIALLY INFECTIOUS MATERIALS

ULTRASONICALLY WELDED SECURES SHIELD TO STRAP (STAPLE-FREE)

POLYESTER UDKBQN HEADBAND ENSURES A SAFE, SECURE FIT & STRETCHES TO ACCOMMODATE ALL SIZES

12 MIL PET IS BENDABLE, YET STURDY, AND VIRTUALLY UNBREAKABLE

ANTI-GLARE, ANTI-STATIC AND ANTI-FOG TREATED

12”

TRANSPARENT LENS FOR OPTICALLY CLEAR, PERIPHERAL VISION

FITS COMFORTABLY OVER GLASSES AND GOGGLES

ROUNDED EDGES FOR INCREASED MOBILITY AND COMFORT

14”

CURVED, WRAP-AROUND DESIGN DELIVERS ENHANCED SIDE COVERAGE AND REDUCES FOGGING

12 x 14” Extended Facial Coverage Lightweight, Breathable Design

FACE SHIELD INFECTION CONTROL