Rm edition june 2013 reduced

Vol. 6, No. 3 May/June 2013

Rocky Mountain Edition (CO, UT, ID, MT and WY)

In Idaho Falls, Idaho, Steens & Sons Continues the Legacy of Their Father Roy Steen With Lights Out Manufacturing

A2Zmetalworker.com

E-Z setup Super-Speed milling Repeat (max profit)

Vertical Edition

VF-2SS | Super-Speed Vertical | Affordable Haas price.

A Division of Ellison Machinery Co. LLC

A Division of Ellison Machinery Co. LLC

Editors Corner

Cover

Patience is a beautiful virtue, unquestionably. Unfortunately it is an attribute that not all of us innately have. And it is not one I can boast about. But, alas, I do try, and I’ve had to exercise this skill recently with more travel than I usually do.

So, I love my Sudoku, and I am now reading more. And then?

What a spectacular country we live in! It is springtime, and many places in our great United States are now experiencing their most beautiful season with flowers blooming everywhere. Since last issue, I have spent time in San Jose, California; Idaho Falls, Idaho; Portland, Oregon: Phoenix, Arizona; Dallas, Texas and Salt Lake City, Utah.

In the last couple of months, Kim and I attended the Pacific Machine Tool Show in Portland, Oregon and the Design2Part Show in Santa Clara, California. We met many of our current customers, and so many new people who will become subscribers to our magazines. We so enjoy these opportunities to meet with so many in the industry! Still, while I have been to many of these locations over years in business, Idaho Falls was a first for me. And it was stunning!

I traveled numerous times to Santa Clara, CA during my 9 years while working at Intel.

Since we launched the Rocky Mountain edition of the A2Z Metalworker, I frequent Salt Lake City, as it is such a key city for the Rocky Mountain magazine. I lived in Dallas, Texas for many years, but haven’t been back in the last 14 years, until this issue. But I am delighted when I am asked to do an article on companies in less traveled locations in Idaho, Montana and Wyoming. I booked a hotel overlooking the falls in Idaho Falls, Idaho, and it just made me smile. I took many pictures of the landscape, and I felt compelled to make one of them part of the cover.

I hope that you enjoy the articles in this issue. One company, a small 4 person shop, is making a business by two sons, one that their father, a race car driver, started in Idaho Falls.

Another, a shop in Phoenix, Arizona, is doing such great things with their gold plating and metal finishing, now NADCAP accredited, that they wanted to share the news in the Rocky Mountain Region. And while heading back from Idaho Falls to Salt Lake City, I stopped in on a manufacturing company in Blackfoot, Idaho, that grew from 1 person to more than 350 employees in less than 20 years, with the founder still active! It was inspiring.

Many of the machine tool dealers in the magazines say business was record breaking in 2012, and that it continues to be very strong this year.

And all of this helps us to feel confident that manufacturing is a viable industry in our country, not just for those in it today, but also for those who are just entering the workforce. At this time, many of you are celebrating your new graduates, whether they are just finishing high school, college, or an advanced degree.Thank goodness, the environment for them is so much better than it was a few years ago. Let us all help them to continue on their paths to success.

So for those who can benefit from it, practice patience! I promise to. Until next issue, I wish you success and happiness, and God Bless our Troops!

Linda Daly Publisher A2Z METALWORKER

•

4•

May/June 2013

In Idaho Falls, Idaho, Steens & Sons Continues the Legacy of Their Father Roy Steen With Lights Out Manufacturing.

This Month’s Shop Profile.

Announcements/Releases... 6,8,10,12,14,16,18 Feature.Articles.......... ....................18,28-29,30 Buyers.Guide.Equipment........................49-54 Buyers.Guide.Processes...........................55-61 Card.Gallery..............................................49-61 Index.Of.Advertisers.....................................62 Editorial....................................... Throughout

Published.by: A2Z.Metalworker PUBLISHER/EDITOR Linda Daly linda@azmetalworker.com Mail Address: PO Box 93295 Phoenix, AZ 85070 Telephone: (602) 412-7696 Website: www.azmetalworker.com E-mail: info@azmetalworker.com

CONTRIBUTORS Kim Carpenter Gene Wirth Chris Seay Published bi-monthly to keep precision manufacturers abreast of news and to supply a viable vendor source for the industry.

Circulation: The A2Z Metalworker has compiled and maintains a master list of approximately 6500 people actively engaged in the Precision Manufacturing Industry. It has an estimated pass on readership of more than 18,000 people.

Advertising Rates, deadlines and mechanical requirements furnished upon request or you can go to www.azmetalworker.com.

All photos and copy become the property of A2Z Metalworker.

The Publisher assumes no responsibility for the contents of any advertisement, and all representations are those of the advertiser and not that of the publisher.

The Publisher is not liable to any advertiser for any misprints or errors not the fault of the publisher, and in such event, the limit of the publisher's liability shall only be the amount of the publishers charge for such advertising.

Miter cutting has never been so affordable Trajan saws are designed by people who know the metal cutting industry. These utility Trajan horizontal band saws are quality machine tools that will provide fast, precise cutting. All of our band saws use a strong gear box, hydraulic down feed control, a wire chip brush, and a standard coolant pump system.

Trajan 1319 13" x 19" Two-Way Swivel, Professional Heavy Duty Band Saw • New type one-piece stand incorporated with swivel control box for very convenient operation • Professional semi-auto hydraulic system can make a perfect cutting cycle by lifting the saw head to correct height and cutting down

only

• Laser cut light and hydraulic tension meter included

$9,250

Trajan 250S Manual, Swivel Head, Variable Speed Band Saw • Cast iron base and blade wheels coupled with heavy gauge steel saw head perform excellent while maintaining low cost • Control panel conveniently installed on top of saw • Carbide guide enhances cutting stability and extends blade life

only

$5,400

• 0° Cutting Capacity: 9 13/16” Round, 9 13/16” x 15 1/8” Rectangle, 9 1/16” x 15 3/4” Rectange • 45° Cutting Capacity: 8 7/16” Round, 9 13/16” x 8 7/16” Rectangle

Trajan 712N 7” Metal Cutting Band Saw • Utility saw, better value, immediate delivery, always in stock • Casting structure assures mechanical strength • Adjustable blade guide for high accuracy and long blade life

only

$1,200

WWW.TRAJANSAW.COM

877-499-7297 A2Z METALWORKER

•5 •

May/June r2013

Announcements & Releases Colorado.Water. Jet. (CWJ). Named. a. 2013.

Colorado.Companies.to.Watch.Finalist

For more information on Star Metal Fluids, visit metalfluids.com, or call Jason Hicken for local support in Utah at 801-641-2214.

Colorado Water Jet is honored to be nominated and named as a finalist for the 2013 Colorado Companies to Watch awards. The program acknowledges the hard work, growth and success of second-stage companies. This year-long program is hosted by the Colorado Office of Economic Development and the Edward Lowe Foundation. They attended a reception earlier this month at the Governor’s mansion with representatives from 99 other Colorado firms who are also finalists. Dan Nibblelink, President of CWJ, a Veteran-Owned company, says, “We were honored to make it to the penultimate stage of this prestigious awards program.”

Rocky. Mountain.Tooling. and. Machining.

Association.(RMTMA).Welcomes.its.Newest.

Members!

The top 50 will be honored as Colorado Companies to Watch at an event on June 28. To learn more, visit the Colorado Companies to Watch website.

Star.Metal.Fluids.Supports.‘Manufacturing.

With.Passion’.Event.at.DATC Star Metal Fluids supported industry associates Hartwig and the Davis Applied Technical Center (DATC) in a 2 day manufacturing event in April.

The event, hosted at DATC, was packed with shop floor and classroom activities, including the following: -Benefits of High Pressure Coolant Presented by Jill Taylor, MP Systems -Optimizing Coolants & Oils for your Process Presented by Jeff Klimowicz, Qualichem, Inc. -New! THINC-OSP P-300 Conrol Presented by Okuma -ISCAR New Drilling Technology Presented by Chad Jenkins, ISCAR -Hardinge Workholding Presented by Mike Levanduski, Hardinge Russ Kurzawski, president/ founder of Star Metal Fluids, says, “We are delighted to support key manufacturing events with industry leaders. From the day we opened for business, we have been dedicated to providing the metalworking industry with the latest in technology to meet the demanding challenges and constant changes of today’s high-tech applications. We know application and we will find the best possible metalworking fluid to not just “meet your needs” but improve finishes, tolerances and part size.”

Today, Star Metal Fluids offers superior metalworking fluid solutions, including the Qualichem line of metalworking fluids in Arizona and Utah.

A2Z METALWORKER

•

6 •May/June 2013

Imperial Machining, Co. Imperial Machining is a precision job shop in Denver. The company is owned by Ernie Beinlich who started the company with his father in 1984. They started with one lathe and one mill and have grown for the last 29 years. Imperial is currently in the process of receiving ISO Certification, targeted for completion at the end of summer.

For more information, call Ernie at 303-288-6487 or email him at ebeinlich@imperialmachining.com.

Community College of Denver Community College of Denver offers two AAS degrees in CNC Machining as well as 5 certificate programs in machining. They also offer an AAS in Fabrication Welding as well as 5 certificate programs in Welding. One of their most popular certificates is the 6G Pipe Welding certificate that is available to students. They offer morning, evening, and night classes.

Tony Rubino is the Director of Manufacturing at Community College of Denver. He is well qualified for his position with nearly 30 years of previous manufacturing experience.

For more information, call Tony at 303-853-9517 or email him at Anthony.Rubino@ccd.edu.

New. Product.Testing. Laboratory. Opens. In. Colorado.

Cascade TEK is an accredited product testing facility now open in Longmont, Colorado.

Readers of A2Z Metalworker Magazine will find Cascade TEK a resource for: Corrosion Testing –Salt Fog, Salt Spray Salt Fog Testing can demonstrate the corrosive tendencies and adhesion quality of plating and coatings. http://www.cascadetek.com/ testing-services/salt-fog-salt-spray-cyclic-corrosion-testing Ingress Protection Testing – NEMA Enclosures Ingress Protection (IP) tests are typically performed on enclosures to determine the level of protection needed from water, dust, ice, chemical or splash intrusion. Cascade TEK is accredited to perform Announcements Continued Page 8

VE RTICAL MACHIN IN G CENTERS

G CEN T ERS

WE HAVE WHAT IT TAKES

HAT IT TAKES

Looking for speed…power…precision…quick setups…conversational programming, all in a rugged, budget-beating VMC? Whatever you need, look for Doosan’s Mynx or DNM to have it.

Mynx – models 5400, 6500 or 7500

For partsor upversatility, to 60 x 30 x 24.6 inches s speed,•power count on Doosan to have it.

• Spindle motors from 20 to 40 HP and speeds to 12,000 rpm • tals, verticals, Traverse verticals Rate 1,181 and ipm mill-turns • Rapidinverted

ferent PumaCAT turning 40 andcenters 50 with Big Plus Dual Contact Spindle

s up to 43.3” x 198” DNM diam.

– models 400,long 500, 650 or 750 40” • For parts up to 85 x 30 x 25.6 inches

Spindle motors to 75 Hp•and 6,000 rpmfrom 15 to 30 HP and speeds to 15,000 rpm

• controls, meehanite castings, 45o slant beds, uding Fanuc Traverse Rate 1,889 ipm • Rapid torque tube construction, glass scales, y-axis motion, spindles, and live tooling CAT 40 taper with Big Plus Dual Contact Spindle

with more than 30 years’ experience building tough machines for the toughest jobs.

CTIVITY

And they’re from Doosan, with more than 30 years’ experience building tough machines for the toughest jobs. www.doosaninfracore.com/machinetools Corporate Office & Engineering Center: 19A Chapin Road Pine Brook, NJ 07058 Tel: 973-618-2500

www.doosaninfracore.com/machinetools Foothills Machinery Sales

Midwestern Technical Center: 1701 F Howard Street Elk Grove Village, IL 60007 Tel: 847-437-1010

VALUE

Corporate Office & Engineering Center: 19A Chapin Road 116th Ave, Broomfield, CO 80020 Pine Brook, NJ 07058 Tel: 973-618-2500

6855 West Western Technical Center: 488 W. Meats Avenue Orange, CA 92865 Tel: 714-974-1330

303.466.3777

Midwestern Technical Center: 1701 F Howard Street www.foothillsmachinery.com Elk Grove Village, IL 60007 Tel: 847-437-1010

TECHNOLOGY

PRODUCTIVITY

VALUE

Western Technical Center: 488 W. Meats Avenue Orange, CA 92865 Tel: 714-974-1330 A2Z METALWORKER

•7 •

May/June r2013

Fadal Problems?

Down Today - Up Tomorrow

Find Us On Facebook & Twitter!

MOTORS SPINDLES

RESOLVERS

sales@fadalcnc.com • 208-855-9426 1582 E. Bramble Ln • Meridian ID 83642 WWW.FADALCNC.COM

BALLSCREWS

Announcements Continued Ingress Protection testing that satisfies NEMA 250, IEC 60259 (electronics), DIN (Europe), MIL-STD (military), SAE (automotive) and RTCA-DO-160 (avionics) specifications. http:// www.cascadetek.com/testing-services/ip-ingress-protection-testing Accelerated weathering – UV, BlowingWind, Rain, Ice Build-Up Weathering and light exposure are important causes of damage to coatings, plastics, inks and other organic materials placed on metal.

This damage includes gloss loss, fading, yellowing, cracking, peeling, embrittlement, loss of tensile strength, and delamination. http:// www.cascadetek.com/testing-services/uv-exposure-acceleratedweathering Vibration and Shock Testing How will real world vibration or shock conditions affect assemblies & components mounted in enclosures? Cascade TEK’s vibration lab can simulate many types of vibration and shock waves from transportation/cargo bounce to gunfire. http://www.cascadetek.com/ testing-services/vibration-shock-testing These are just an example of the wide variety of tests Cascade TEK’s Longmont Colorado laboratory can perform. Cascade TEK is ISO/IEC 17025 Accredited by A2LA to perform a wide variety of industry test standards – MIL-STD (Military), SAE (Automotive), A2Z METALWORKER

•

8•

May/June 2013

RTCA-DO-160 (Avionics), ASTM (Materials). For more information or to schedule a lab tour, contact Mary Babitz at 720-340-7810 or mary@cascadetek.com

NTMA.Helps.Launch.Nationwide.Effort.To. Connect. Manufacturers.With. Skilled. National.Guard.Members.Looking.For.Employment NTMA was one of the first trade associations to endorse the Center for America’s American Jobs for American Heroes (AJAH), a national campaign designed to connect unemployed National Guard members and military veterans with manufacturers and other employers.

NTMA President Dave Tilstone is a member of AJAH’s Advisory Council that provides guidance to the Center for America’s leaders in the implementation of this important campaign.

The AJAH effort is a great way for NTMA members to advertise their job openings to highly motivated potential employees. Only one in four applicants are accepted into the National Guard and members train continuously in programs provided in 107 categories, from leadership, administration and logistics to electronics, operations and maintenance.They demonstrate a readiness for learning, responsibility for good teamwork and reliability, and they understand how to perform in a disciplined organization.

Announcements Continued Page 10

WHICHEVER SWISS ST 26 YOU CHOOSE:

MEDICAL ADVANCED STARTER

YOU ALWAYS CHOOSE SWISS MADE QUALITY Tornos Swiss ST 26 for turned parts up to 26 mm. Amazingly affordable Swiss Made quality.

Now it pays to invest in high performance and productivity with the new Swiss ST 26. Two totally independent tool systems provide balanced operations, 7 linear axes, 2 C-axes and conversion to a guide-bush-less machine in only 30 minutes. The Swiss ST 26 is equipped with the most powerful and dynamic spindle and counter spindle ever built for this class of machine, allowing extreme machining capabilities. Choose from three turnkey equipment packs: “Starter”, “Advanced” and “Medical”.

Tornos Technologies US Corporation: Lombard, IL and Bethel, CT; www.tornos.us

A U T O M O T I V E - M E D I C A L - E L E C T R O NA2IZCMETALWORKER S - MICROM A N I C2013 S • 9E C •H May/June

rate and superior productivity.

Shop Tools, Inc., Colorado’s Largest Independent Distributor, Is Celebrating Over 30 Years In Business!

The CoroMill 357 multi-edge design presents a cost efficient solution because the double sided, thick pentagonal inserts housed in shim-protected tip seats provides superior production economy and reliable performance.

The mill’s secure, strong cutter body features an innovative insert clamping system that offers quick and easy insert indexing to save time. Large support-faces radially, axially and on the base prevent deformation and ensure consistent performance.

For more information on the new CoroMill 357, visit sandvik. coromant.com/productnews.

We Are The ‘PRO’ in Productivity!

8160 Blakeland Dr, Unit G Littleton, CO 80125 Ph. 303-375-9190 Fax: 303-375-9198

1110 Elkton Unit A Colorado Springs, CO 80907 Ph. 719-593-0237 Fax: 719-593-8907

www.shoptools.com www.shoptools.com

Announcements Continued Here’s how it works: AJAH is a Free Resource to FillYour Jobs with Unemployed National Guard Members NTMA Members looking for qualified employees have free and direct access to thousands of unemployed National Guard members and military veterans through the ongoing nonprofit American Jobs for America’s Heroes campaign.With more than 60,000 unemployed National Guard members nationally, this is a huge resource for employers looking for skilled, experienced and reliable employees.

Your job postings are plugged directly into the National Guard Employment Network to fuel the work of state National Guard employment teams who match candidates with your jobs.These counselors in every state, with support from Corporate America SupportsYou and Military Spouse Corporate Career Network (MSCCN), will help you understand how military experience and training relate to your job requirements.

You can read about our participation in the campaign on AJAH’s blog at or http://www.americanjobsforamericasheroes.blogspot.com/2013/04/spotlight-on-supporters-pma-and-ntma.html

Sandvik.Coromant.Introduces.a.New.Multi-edge.Rough.Face.Milling.Cutter Sandvik Coromant introduces CoroMill 357, a new tough multi-edge face milling cutter for roughing and cubing in steel and cast iron with high insert security.

In typical applications, such as rough face milling, cubing, intermittent component figurations, components with uneven stock or forgings, welding and castings, applying CoroMill 357 achieves a high metal removal A2Z METALWORKER

•

10 •

May/June 2013

Makino. Offers. 24/7.

Phone. Suppor t. to.

Help.Meet.Customer.

Production.Demands Makino is pleased to announce that it has extended hours for its customer telephone support, providing assistance 24 hours a day, seven days a week.

“For many years, Makino’s call center has served customers with immediate support through highly experienced technical support specialists who possess more than 150 years of combined experience,” said Darren Harville, Makino’s customer support operations manager.

“As Makino continues to look for ways to satisfy the needs of customers and strives to provide exceptional assistance, we are happy to extend the availability of our telephone support to a full 24/7 service.”

Makino Technical Support can be Announcements Continued Page 12

We help you put all the pieces together.

We know metal working inside and out. Since 1996 we have been more than a distributor of metal working equipment and supplies. We’re your single source for custom solutions to all your metal working needs: equipment, supplies and inventory supply control.

Bench and Pedestal Wheel Arbor Bushings

We assist you in many facets of your business to ensure you produce the highest quality products, the most economical solutions and the best service in your industry.

ARBOR BUSHINGS WHEEL DIAMETER

WHEEL CENTER HOLE 1/2" 5/8" 3/4" 7/8"

5”, 6", 7” 1" 8"

1"

10"

1-1/4"

1-1/4"

12" X 1”

• technical solutions • development • automation • equipment • supplies • inventory control

•

1" 1-1/4"

•

•

•

•

•

•

•

•

•

•

•

•

12” X 2”

1-1/4”

•

12"

1-1/2"

•

•

14"

1-1/2"

•

•

THESE SIZE BUSHINGS SHIPPED FREE OF CHARGE WITH YOUR WHEEL ORDER.

We’re Colorado’s only Yellow Coat Elite Sandvik certified dealer!

For complete information on all of our products and services call us today and we’ll be happy to send you a catalog that will detail products and supplies specific to your needs.

We’ve got you covered.

Logon to www.aittools.com

4575 S. Navajo • Englewood, Colorado 80110 Call us! We can help...

800-321-3195

A2Z METALWORKER

• 11 •

May/June r2013

SCRAP PICK-UP SPECIALISTS

Call us first for FREE containers

We set containers for: • Machine, welding & fab shops • Manufacturing facilities • Demolition projects • One-time clean-ups • Containers: 1 to 60 yards • Flatbed, cargo trailers, rolloffs • Small boxes on wheels • Locking Lids • Leakproof boxes

Top prices paid for: • Aluminum • Copper • Brass • Stainless • Steel/Iron • Alloys • Lead & more

Convenient drive-in recycling:

Call now for up-to-the minute price quotes and market info!

Iron & & Iron Inc. Metals,Inc. Metals,

• Easy acces from I-25, I-70 and Commerce City ~ • Fully paved • Se Habla Espanol

5555 Franklin St. Denver, CO 80216 www.ironandmetals.com

303•292•5555 1•800•776•7910

Recycling Metals, Conserving Resources, Since 1961 Announcements Continued reached at 1-888-MAKINO4 (625-4664). Normal hours are 7 a.m. to 9 p.m. EST Monday through Friday, and 8 a.m. to 5 p.m. Saturday and Sunday. When a phone call is made after hours, a live person will answer and gather information; an on-call technical support specialist will promptly get back to the customer. In the majority of cases, Makino’s experienced personnel are able to resolve issues over the phone, with little downtime.

Makino provides lifetime support of its machines with parts, regardless of the age of the machine. More than 15,000 different stocking units are in inventory; they can be ordered both online and by phone.

Makino personnel are available to ship these parts within 24 hours, seven days a week, from one of 10 strategically located North American warehouses.

“This is just another way that Makino is working to help customers meet increased production demands and handle the pressures of tighter deadlines,” said Harville.

Mitsubishi.Makes.a.Splash.in.Fiber.Laser.Technology Mitsubishi now offers its new Fiber Laser line, which ushers in a new era of laser processing performance.

There are plenty of fiber laser systems available out there, but you’ve never seen one like this before.

Fusing Mitsubishi’s world-leading laser processing machines with the advanced fiber laser beam, this Fiber Laser has evolved laser processing to an entirely new level of performance.

The revolutionary 3015 NX-F comes standard with a fiber laser oscillator, a z-axis linear drive, preset auto-focus processing head, a 64-bit NC with 15-in. touch screen NC-panel, and more. The stroke on the new NX-F will be 125.9” (3198 mm) by 62.9” (1598 mm) by 4.7” (119 mm), with positioning accuracy of 0.0019/20” (0.05/500 mm). And the rapid traverse rate on the single axis machines will be 4724 in. (120 m) per minute, or 6680 in. (170 m) per minute on simultaneous machines.

A2Z METALWORKER

•

12 • May/June 2013

“This isn’t the first fiber laser, but we took the time in research and development to make sure that when we entered the market, we had it right,” says Bill Isaac,VP of Mitsubishi Laser.

Mitsubishi’s superior products are backed by industry-leading service and support. With regional satellite service locations across the country, our localized service teams can respond instantly. Our knowledgeable service team will be at the booth to discuss how Mitsubishi goes above and beyond to deliver excellence in customer service.

Since introducing the first laser cutter to the US market, in 1987, Mitsubishi Laser has occupied dominant positions in engineering, electronics, manufacturing and product development. For more information, contact MC Machinery Systems, Inc., Phone: 630-616-5920 or visit www. misubishi-laser.com.

Announcements Continued Page 14

Samuel Aerospace is one of North America’s top ten processors and distributors of metals, operating more than 40 facilities which are strategically located throughout Canada and the United States.

Additional facilities maintained in the United Kingdom, Australia, Mexico and China extend our reach globally. Our strategically placed processing and service centers allow us to offer on time and JIT delivery services.

Samuel Aerospace alloys are available in a complete range of shapes and sizes to meet the diverse requirements of the commercial and defense aerospace markets. We stock one of the most extensive aluminum inventories in the industry.

Our available aerospace aluminum offering includes:

• Sheet & Coil • Plate • Rod & Bar • Tube & Pipe

A variety of AS, ISO and TS standards ensures conformance to customer’s requirements. Primary aerospace service centers are ISO 9000 and AS9100/9120 certified.

Samuel Aerospace offers value-added quality processing services including:

• Water-Jet Cutting

• Bar and Extrusion Sawing

• Aluminum Plate Sawing • First Stage Processing

Our pre-production processing services are all performed to stringent quality standards to your specifications, saving you time and money while ensuring the quality of your end product. We go to great heights to deliver the right product to the correct quality standards, on time, every time. Plus, we offer Stock and Release and Vendor Managed Inventory programs.

These programs can help your company eliminate costly inventories and improve cash flow.

To learn more contact your Samuel Aerospace Metals representative or call (877) 565-7050.

Everything you need in a metals supplier…quality, reliability and availability.

Announcements Continued

United. Performance. Metals. Recognizes.

Employee.Service Congratulations were extended to Scott Fasse for reaching 10 years of service with United Performance Metals during the second quarter of 2013. Mr. Fasse holds the position of Vice President of Marketing for the company.

United Performance Metals is a leading supplier of specialty stainless steel and high temperature alloys. In business since 1982, United Performance Metals has experience serving the needs of customers in diverse markets including aerospace, aircraft, automotive, medical, food service, house-wares, petro-chemical and many others.

United Performance Metals is one of more than a dozen companies that comprise O’Neal Industries (onealind.com), the U.S.A.’s largest family-owned group of metals service centers. With sales of approximately $2.5 billion in 2011, O’Neal Industries is based in Birmingham, Alabama, and has more than 90 specialized facilities throughout North America, South America, Europe, and Asia.

For more information on United Performance Metals visit us at www. upmet.com, call us at 1.888.282.3292 or email sales@upmet.com.

A2Z METALWORKER

•

14 •

May/June 2013

Hexatron.Engineering.Company.Celebrates.

31.Years.In.Business Hexatron Engineering Company is celebrating its 31st year in business.This engineering, design, and manufacturing company was founded by Cy Williams, a degreed mechanical engineer. He has built his company and reputation on its expert design capabilities.

The U.S. Air Force has contracted with Hexatron Engineering many times to reverse engineer parts and manufacture spares at a much more economical cost then previously possible.

For the 25 years, Hexatron Engineering has been a licensee of Boeing Aircraft Company and has been manufacturing the aircrew seats used on the DC 9 and DC 10 Cabin Attendant and Crew Seats.

Cy says that if you use aluminum molds you should explore the possibility of HEXALITE, a proprietary treatment that could save you in both material and labor costs. This treatment makes it so nothing sticks to the surface of the aluminum part(s).

For more information on this superior engineering, design and manufacturing company, contact them at 801-363-8010 or visit their website at www.hexatronengineering.com.

Blaser.Swisslube.Introduces.Vasco®.7000.

Blaser Swisslube Inc., premier manufacturer of Swiss quality metalworking fluids, is pleased to announce the release of Vasco®

Announcements Continued Page 16

D>)F%* !"

#'40-.!):$ EFC#GH0!CII?JK#C>/#?J#JADEF#L/CD?@L (:(+!#(;$-.4<

!"

#'40-.!):$

'$(75(-"-'):$89$$$$$$$$$#-+(75-(0-$48)28)'+-8.

(:(+!#(;$-.4<

'$(75(-"-'):$89$$$$$$$$$#-+(75-(0-$48)28)'+-8.

)%./%0#)'#1%&')#%23.%45-"'$#16%&#%"5+%5%7##8'$9%("#:;+%45<#%&5=#1>% #7*)#@1##$%+#1'9$%'4B)*=#4#$(1%"5=#%)#'$7*)-#+%*,)%8#5+#)1"'B%'$% #+%*,)%-,1(*4#)1;%1,--#11>%D*%*("#)%45-"'$#%*$%("#%45)<#(%"51%*,)% #%(#-"$*8*9:6%'4B)*=#+%B*&#)%1,BB8:%5$+%+##B#)%1,A4#)9#+%-,(('$9% %A:%("#%)#8'5A8#6%#EB#)(%1,BB*)(%*,)%-,1(*4#)1%#EB#-(>%

*++#,-#&).*'#&'#/,'-*),-%,01.2(345.67$,2""36# =94

!"#$$%$$&'(!)$$%$$*'+!),!+$$%$$#-&&-./$$%$$0-/01(2!!"$3#4$$%$$2)!(($5)'6!$ '7+8#'+-8.$$%$$48.(7#'5&!($$%$$2)!18*.!"$$%$$(!)3-4!$$%$$9-.'.4-./$$

!"#$$%$$&'(!)$$%$$*'+!),!+$$%$$#-&&-./$$%$$0-/01(2!!"$3#4$$%$$2)!(($5)'6!$ '7+8#'+-8.$$%$$48.(7#'5&!($$%$$2)!18*.!"$$%$$(!)3-4!$$%$$9-.'.4-./$$

#$%&'#()"%*& %$+,%''&%-.%)/0'%* "1234563782&+639:&/:7;4<2<=1% F#=*8,('*$5):%$*$@-*$(5-(%+#1'9$

"1234563782&+639:&/:7;4<2<=1% F#=*8,('*$5):%$*$@-*$(5-(%+#1'9$

>?@<A/;6:85:6% ?88*&1%,B%(*%GH%'$-"#1%*7%(")*,9"@B5)(%&')#% (")#5+'$9%7*)%(588%B5)(1

>?@<A/;6:85:6% ?88*&1%,B%(*%GH%'$-"#1%*7%(")*,9"@B5)(%&')#% (")#5+'$9%7*)%(588%B5)(1

,%>+0$F&/D%&

"<BC87@&D:85&+:E3=4% 251:%'$+#E'$9%+,)'$9%*B#)5('*$

"D>)F%* & ,%>+0$F&/D%

"<BC87@&D:85&+:E3=4% 251:%'$+#E'$9%+,)'$9%*B#)5('*$

>?!@ABCD#EFC#GH0!CII?JK#C>/#?J#JADEF#L/CD?@L

"D>)F%* !"#$%&#%'$()*+,-#+%*,)%./%0#)'#1%&')#%23.%45-"'$#16%&#%"5+%5%7##8'$9%("#:;+%45<#%&5=#1>% ?%:#5)%85(#)6%("#%$#=#)@A#7*)#@1##$%+#1'9$%'4B)*=#4#$(1%"5=#%)#'$7*)-#+%*,)%8#5+#)1"'B%'$% ("#%45)<#(C!"#%1B5)<#+%*,)%-,1(*4#)1;%1,--#11>%D*%*("#)%45-"'$#%*$%("#%45)<#(%"51%*,)% $*@(*,-"%-:8'$+)'-58%+)'=#%(#-"$*8*9:6%'4B)*=#+%B*&#)%1,BB8:%5$+%+##B#)%1,A4#)9#+%-,(('$9% -5B5A'8'('#1C588%A5-<#+%A:%("#%)#8'5A8#6%#EB#)(%1,BB*)(%*,)%-,1(*4#)1%#EB#-(>%

#$%&'#()"%*& %$+,%''&%-.%)/0'%* >?!@ABCD#EFC#GH0!CII?JK#C>/#?J#JADEF#L/CD?@L

!""#$%&'#&((#'%"#)*++#,-#&).*'#&'#/,'-*),-%,01.2(345.67$,2""36# .2#5&((#8990::;0<8=94

!"#$%&#%'$()*+,-#+%*,)%./%0#)'#1%&')#%23.%45-"'$#16%&#%"5+%5%7##8'$9%("#:;+%45<#%&5=#1>% ?%:#5)%85(#)6%("#%$#=#)@A#7*)#@1##$%+#1'9$%'4B)*=#4#$(1%"5=#%)#'$7*)-#+%*,)%8#5+#)1"'B%'$% ("#%45)<#(C!"#%1B5)<#+%*,)%-,1(*4#)1;%1,--#11>%D*%*("#)%45-"'$#%*$%("#%45)<#(%"51%*,)% $*@(*,-"%-:8'$+)'-58%+)'=#%(#-"$*8*9:6%'4B)*=#+%B*&#)%1,BB8:%5$+%+##B#)%1,A4#)9#+%-,(('$9% Providing Technology Solutions for Competitive Manufacturing -5B5A'8'('#1C588%A5-<#+%A:%("#%)#8'5A8#6%#EB#)(%1,BB*)(%*,)%-,1(*4#)1%#EB#-(>%

!""#$%&'#&((#'%"#)*++#,-#&).*'#&'#/,'-*),-%,01.2(345.67$,2""36# .2#5&((#8990::;0<8=94

#$%&'#()"%*& %$+,%''&%-.%)/0'%*

Call today to learn more 801-263-6403 or visit smithmachinetools.com

a high-speed package that slashes cycles times even further.

UTAH METAL WORKS www.umw.com

Tollfree: 866-434-5679 Local: 801-364-5679

How Much Is My Metal Worth?

CALL US

now to find out!

At Utah Metal Works, recycling industrial-related scrap metal is one of the things we do best. You simply won’t find more knowledgeable, capable partners for your scrap handling and recycling efforts anywhere. We are known in the industry for our honesty and integrity, and you can be sure you are always getting a competitive return along with superior service. We make it easy for you to cash in on non-ferrous metals from:

Industrial/Manufacturing Scrap • Punchings • Solids of any metals • Turnings and borings

• Skeleton plate • Machine Shop/Fabricator • Solids of any size or type

Aircraft/High Temperature Alloy Scrap Stainless, titanium, Inconel, Hastelloy, Monel, cupronickel, aluminum;state-of-the-art metal analysis conducted on site; Mixed or contaminated items are accepted and sorted Easy Access To I80, I15, and I215 Detailed Directions On Our Website 805 West Everett Ave • Salt Lake City, UT 84116

Announcements Continued

7000. Vasco® 7000 is a third generation water miscible, bio-based semi-synthetic emulsion formulated with the latest in state of the art metalworking fluid components for the aerospace industry.

Vasco® emulsions are sustainable and are registered for use under the USDA BioPreferred® Program.

Blaser Swisslube develops, produces and sells high-quality cutting and grinding fluids. Blaser’s liquid tool® is used worldwide with great success to produce a wide range of products, from the tiniest of components for the watchmaking industry, to human implants for the medical field. Aircraft and aerospace companies have been successfully manufacturing flight critical and structural components for many years with Blaser Swisslube metalworking fluids. For more information on how Blaser Swisslube can boost your shops productivity, please visit www.blaser.com.

Haas.Introduces.High-Speed.HRC210.Roller.Cam.Rotary.Table Adding a 4th-axis rotary table to a machining center is a proven way to boost productivity, reduce setups, and increase accuracy on multi-op parts. Adding a fast rotary table to a fast machine creates A2Z METALWORKER

•

16 •May/June 2013

The HRC210 from Haas Automation is a high-speed, cam-driven rotary table that provides cutting and indexing speeds up to 830°/second. It provides 110 ft-lb (149 Nm) of spindle torque for synchronous 4-axis machining, and has a pneumatic brake that yields 134 ft-lb (182 Nm) of holding torque for stationary work. Indexing accuracy is ±20 arc-sec, with repeatability of 4 arcsec. The 8.27” (210 mm) platter of the HRC210 has a center height of 6.000” (152.40 mm), with a 2.00” x 1.91” deep (50.8 mm x 48.5 mm dp) pilot bore and 1.77” (45 mm) through hole.

Six radial T-slots simplify fixture and workpiece mounting, and both manual and pneumatic tailstocks are available for additional workpiece support.

The HRC210 is driven by a highperformance roller cam system that uses a high-torque servomotor to drive a globoidal cam meshing with cam followers equally spaced around the diameter of a roller gear. Needle bearings in the cam followers provide smooth contact with the cam, and a precision-engineered cam profile ensures accurate speeds and motion.

Because the roller drive is preloaded during assembly, the system yields high stiffness, high torque, and high speeds, while providing low wear characteristics and reducing maintenance.

Ganesh. Machinery.Will.

Introduce.A. Fully.Automatic. Robotic. Machine.

Tending.System In keeping with the PMTS show theme of “Machining Technology,” Ganesh will show you how to meet tomorrow’s needs today by unveiling the new multitasking machines with robotic machine tending system on the main PMTS -2013 show floor Booth# 263.

Ganesh Cyclone Series with fully robotic system new machine models are well-suited for those who are thinking Announcements Continued Page 18

J.M Grisley Machine Tools, Inc. See What’s Happening!  Fanuc And Doosan Factory In-House Service.  Distributor Of Doall Sawing Products.  Application Engineer On Staff.  We Are Capable Of Full Turn-Key And Programming Training.  Specializing In Pioneer Rotary Tool Holding And All Fixturing For Your Machining Center Or Turning Center.  The Grisley’s Are The Areas Grinding Experts. From Surface To Cylindrical And Tool And Cutter To Centerless Call Us For All Your Grinding Needs.  And Did You Know That Jim And Lars Have Caught More Fish Than Any Other Machine Tool Company In The Area?

And What’s Happening At

!

DNM 350-5AX

 Doosan does 5 axis right! Integrated 14” rotary trunion machine for a price you won’t believe!  Most turning machines are on special.  Barfeed packages Starting at 70k. Includes bar feeder, chip conveyor and full install and warranty.  Try one and see why once you buy a Doosan it is tough to get anything else.

1485 SOUTH 300 WEST SALT LAKE CITY, UTAH 84115

801.486.7519 A Z METALWORKER • 17 • May/June r2013 www.jmgrisleymachine.com 2

801-487-9700 www.superiorgrinding.com 245 West Crossroads Square S. Salt Lake, Utah 84115

NOW NOW ISO ISO 9000...2008 9000...2008 CERTIFIED CERTIFIED Long bar grinding up to 20’ long. (Dia depends on Weight) Some Bar Straightening.

(We can supply you with material ground to size or you can have your material sent to us to be ground to size.)

Centerless grinding (polish or stock removal) Plunge grinding (Close tolerance and long runs) (Specialize in Production Runs of, pins, shafts, medical parts etc) Angle or surface 144” x 8” x 4”

Through feed grinding up to 5” OD (Length depends on weight) Blanchard grinding 40” swing and 14” under head I.D./O.D. grinding Digital Readout Close Toll. O.D. – 45” L x 12” O.D. I.D. – 9” depth x 10” I.D. Blade Grinding Industrial Machines-12 foot long magnetic beds Surface grinding (12” W / 28” H / 52” L)

We can supply you with material ground to size or you can have your material sent to us to be ground to size.

Announcements Continued about how to remain competitive by both getting the job done in one handling and having ample tooling flexibility to have multiple jobs setup on the machines at one time.

Cyclone-32 GT: A dedicated pneumatic part loading system will demonstrate high speed, small part loading capability on the Ganesh Cyclone-32GT 3-axis precision heavy duty gang tool lathe. The load system provides a low cost solution for small component manufacturers.

CYCLONE 52-TTMY: The Ganesh standard robotic machine tending system will be integrated to a Ganesh Cyclone-52 TTMY. The robotic system is a fully automatic, compact solution that utilizes a Yaskawa Motoman robot, and a flexible part infeed / outfeed system that can be easily configured to accommodate a wide variety of parts.

CYCLONE 32-CS: The 7-axis machine with 27-tools and 11-live tools will also be cutting demos showing the unique capabilities that it has to offer for 1.375” (36mm) bar diameter sliding headstock A2Z METALWORKER

•

18 •May/June 2013

CNC lathe without a guide bushing. A 10-HP Mitsubishi spindle motor drives the powerful 6,000-RPM spindle. Both the main and sub spindle use 32mm Traub A-32 collets for easy part transfer and complete “done-in-one” machining efficiency, including all radial, end-working, and Y-axis live tooling work on both the front and backside of the part.

its research and development of EDM.The upcoming event will highlight the results of that extensive experience with demonstrations of the company’s latest wire and sinker EDM technology from automatic wire changing capability to the industry’s most advanced EDM Human Machine Interface (HMI).

See machines under power, live demo at PMTS 2013 booth # 263 & ask our application department how you can improve your process. For more info please visit www.ganeshmachinery.com or call 1-888542-6374.

Manufacturers interested in attending the 60th Anniversary Open House can register at go.us.gfac.com/OpenHouse2013.

GF.AgieCharmilles. to. Host.

6 0 t h . A n n ive r s a r y . O p e n.

House.Event GF AgieCharmilles will host a special anniversary open house event commemorating the company’s 60 years of EDM technology development. Scheduled for June 27 – 28 in Lincolnshire, Ill., the two-day 60th Anniversary Event will include educational seminars, training sessions and technology demonstrations along with special celebration activities.

Sixty years ago, GF AgieCharmilles began

Foothills. Machinery. Sales. is.throwing.a.Mastercam.X7.

Rollout.Party.

Foothills Machinery Sales is throwing a Mastercam X7 Rollout Party on Thursday, June 27th at 9AM and 1PM for a software release.

There will be a presentation about the What’s New in Mastercam with a question and answer time, also raffles with Mastercam swag and lunch will be catered by Famous Dave’s Barbeque!

The link to the Mastercam X7 Rollout is www.Mastercam.com

Achieve more...

One Small Step With one small step, a man became a hero and the impossible became a reality.

The same heroic spirit that fueled the space race and placed the first man on the moon still lives within the people who support NASA’s continued pursuit of innovation. Using GF AgieCharmilles HPM 800U machines, NASA experts manufacture the technology that continues to propel science beyond what we think possible.

From that first lunar landing to modern space exploration, the heroes behind these accomplishments take small steps every day that amount to giant leaps for mankind.

Read more about how GF AgieCharmilles helps NASA achieve more at us.gfac.com/hero.

To access the GF AgieCharmilles mobile website, download a QR code app and scan this image.

Tel. (800) 282-1336

us.gfac.com A2Z METALWORKER

• 19 •

May/June 2013

Gold Tech Industries, an ISO:9001/AS9100 Rev. C, Precision Plating and Metal Finishing Company, Is Now Fully NADCAP Accredited!

Gold Tech Industries knows that to continue to service their customers, they must embrace continuous improvement. In 2011, they achieved ISO:9001/AS9100 Revision C certification, then in 2012, NADCAP accreditation for three of their special processes. This year, they took the next step to achieve NADCAP accreditation on all 10 of their special processes.

This ITAR registered company is preparing to celebrate its 30th year in business and is a recognized leader in precision plating and metal finishing applications for the aerospace, defense, automotive, commercial, telecommunications, and semiconductor industries.Their customers are located throughout the world, and they include Boeing, General Dynamics, Honeywell, Lockheed Martin, Raytheon, and Northrop Grumman.

The team at Gold Tech that spearheaded the rigorous NADCAP accreditation includes: Brett Malacky, Project Manager; Julie Flickinger, Quality Manager; Mark Duschek, Environmental Compliance Manager; and Daren Hess, Technical Process Manager. Mark says, “We knew the accreditation to 10 processes was going to be a challenge, as we had been through it just over a year ago for 3 processes. It was, indeed, more than 3-fold the effort, but we are so excited that we can now offer these accredited processes for all of our customers.” Brett added, “We know that our customers, the Prime Contractors and their supply chains, had made NADCAP accreditation a requirement, and we achieved the accreditation as part of our commitment to continuous improvement and superior customer service.”

The company built its reputation on superior product quality, cycle time, and customer satisfaction. This position in the industry has, in part, resulted from the company’s ability and willingness to respond to challenging proposals involving exotic base materials, unique design configurations, and intricate plating and masking requirements. Brett says, “We successfully accomplish these challenges because of the expertise of our staff, and our management team has a combined 171 years of tenure with the company.”

Gold Tech’s NADCAP Accredited Metal Finishing & Plating Processes GoldTech Industries’ Aerospace Division works with the following substrates: Aluminum, Copper, Mu Metal, Steel Alloys, Beryllium Copper, Hastelloy, Nickel Alloys, Silver, Brass, Invar, Kovar, Tellurium Copper, Inconel, Monel, and Stainless Steel. Processes Include: • • • • • • • • • •

Bright Nickel: QQ-N-290, AMS 2403, AMS 2423 Chemfilm (Alodine): MIL-C-5541, MIL-C-81706, MIL-DTL-5541, MIL-DTL-14072 Copper: MIL-C-14550, ASTM B734, AMS 2418 Electroless Nickel: MIL-C-26074, AMS-C-26074, AMS 2404, ASTM B733 Gold: ASTM B488, AMS 2422, MIL-DTL-45204 Passivation: AMS-QQ-P-35, ASTM A967, AMS 2700 Silver: QQ-S-365, ASTM B700, AMS 2410, AMS 2412 Sulfamate Nickel: MIL-P-27418, AMS 2424 Tin: MIL-T-10727, ASTM B545 (matte and bright) Tin-Lead: MIL-P-81728, AMS-P-81728

Daren says, “This past year we added ‘bright tin’ to our list of processes.We offered matte tin in the past, but a number of customers were requesting the bright tin finish, so we accommodated their requirements.”

Gold Tech offers an extensive on-site analytical lab and is proud of its commitment to ensuring environmental compliance and safety in their day-to-day operations.

A2Z METALWORKER

•

20 •

May/June 2013

For more information, contact Gold Tech Industries today at 480-968-1930 or visit goldtechind. com.

ISM:.Factories.Boost.Sales.Projections.For.2013 Bloomberg News reports, “Manufacturers in the US are more optimistic about sales and spending this year than they were at the end of 2012, while service providers were less upbeat, according to a semiannual survey by the Institute for Supply Management.” Purchasing managers “anticipate sales will grow 4.8 percent in 2013, up from the 4.6 percent they forecast in December, and business investment will rise 9.1 percent, more than the prior projection of 7.6 percent, the” group’s survey showed.

“With 17 out of 18 industries within the manufacturing sector predicting growth in 2013 over 2012, US. manufacturing continues to demonstrate its broad-based strength, efficiency and leadership in the world economy,” Bradley Holcomb, chairman of the group’s factory committee, said in a statement.

Navistar. starts. delivering.Afghanistan. MTV. fleet’s.armored.cabs The US Army has taken delivery of the initial batch of armored cab units designed for installation on the Afghan National Security Forces’ (ANSF) Medium Tactical Vehicles (MTV) fleet from Navistar Defense.

TVT DIE CASTING Precision aluminum and zinc die casting, machining and finishing.

Quality, Reliability and Service

It follows a $23m urgent delivery contract awarded by the US ArmyTank Automotive Command Life Cycle Management Command for retrofit of the Afghan National Army (ANA) and Afghan National Police (ANP) MTV’s existing 205 commercial cabs with armored cabs in February.

Navistar Defense vice-president and general manager Bob Walsh was reported by Shephard as saying that the rapid manufacturing and supply of armored cabs would assist in the transition of the US’s security mission and also facilitate withdrawal of the US forces, while protecting the ANSF. Scheduled to be accomplished through re-use of the MTV’s original components, the cost-efficient upgrade is designed to safeguard ANA and ANP personnel from ballistic and blast threats during tactical operations.

We are a full service job shop, providing as much or as little project involvement as required – from tool and die design to finishing and assembly.

tvtdiecast.com ITAR Registered

A2Z METALWORKER

•

800 280 2278

ISO 9001:2008 Certified

22 •May/June 2013

SMHINC

▼

LLC

Based on the Navistar International WorkStar platform, the MTV is a high-mobility vehicle currently operated for general troop transport, and as water tankers, fuel trucks and recovery, as well as petroleum, oil and lubricant (POL) vehicles and cargo trucks in Afghanistan.

The company has delivered around 9,000 MTVs to the ANA and ANP since 2004, having also supplied 14,000 vehicles to militaries including Canada, Israel, Iraq, Jordan, Taiwan.

Deliveries under the contract are scheduled to continue until July.

Maximize CNC Lathe Performance!

CUSTOM SHAPES & SIZES!

PATENTED POLYURETHANE CNC SPINDLE LINERS

CNC Spindle Liners Made Fast, Economically And In Any Shape Or Size!

Don’t turn away jobs because your spindle liner technology won’t allow you to bar feed them!

Visit our website TrustyCook.com, email jeff@trustycook.com or call toll free (877) 240-2462 for more details about our polyurethane CNC lathe spindle liners.

THE RIGHT HAMMER FOR ANY JOB!

10530 E. 59th Street Indianapolis, IN 46236 Ph: (317) 823-6821 Fx: (317) 823-6822

The Originator Of The Highest Quality American Made Dead Blow Hammers!

Toll Free: (877) 240-2462 TrustyCook.com

A2Z METALWORKER

• 23 •

May/June r2013

ATK.to.supply.guided.advanced.tactical.rocket. for.USSOCOM.testing

GladhillAssociates Associates International Gladhill International

TRAINING-- CONSULTING CONSULTING - -AUDITING TRAINING AUDITING

ISO 9001/14001 9001/14001 RABQSA Certified Online/Public ISO RABQSA Certified Online/ Lead Auditor Courses Public Lead Auditor Courses AS9100 RABQSA & AS9110 RABQSA Public - In-House/Customized Accredited Lead Auditor Courses AS9100 & AS9110Courses RABQSA Public - RABQSA In-House/Customized Accredited Lead Auditor AS9100 & AS9110 RABQSA *ISO 9001RABQSA /*ISO 14001 / *ISO 9100 Accredited Lead Auditor *ISO/TS 16949 /*OHSAS 18001 & *ISO 9001 /*ISO 14001 / *ISO 9100 *ISO 17025 Internal Auditing *ISO/TS 16949 /*OHSAS 18001 & (* Denotes On-Line and Public Courses Available) *ISO 17025 Internal Auditing

(* Denotes On-Line and Public Courses Available)

Certified Training!

Certified Online Online Training!

Human Factors - Corrective/Preventive Action Human Factors - Corrective/Preventive Action Process Mapping - Six Sigma - Implementation Process Mapping - Six Sigma - Implementation Documentation - Management Overviews Documentation - Management Overviews ISO/AS Software Modules ISO/AS Software Modules

For more informationcall: call: 719.495.8045 For more information 623.939.4412 or visit: www.gladhillassociates.com or visit: www.gladhillassociates.com email:brodish@gladhillassociates.com

Why Contact Faustson Tool?

• We are a leader in 5 Axis Manufacturing Technology Technology, including 5 Axis Milling and 5 Axis EDM. • We have 30 Years of Experience Servicing Customers.

Fauston Tool is a Woman Owned Small Business.

• Our customers span the Aerospace, Defense, Medical, Semi-Conductor, Energy and Aeronautic industries.

• Our certifications include: ISO 9001:2000, JPL Flight Certified , Ball Flight Certified, MPC Flight Certified , LASP Flight Certified, ITAR Certified Ball Aerospace: First ever delegated supplier

Call Today! www.faustson.com • 303.420.7422 6803 Joyce Street, Ste A Arvada, CO 80007 A2Z METALWORKER

• 24 •May/June 2013 • 66 •Mar/Apr 2010

A2Z METALWORKER

Alliant Techsystems (ATK) has been awarded a contract for the supply of a low-cost, lightweight, precision-guided missile for evaluations by the US Special Operations Command (USSOCOM), as part of the Defense Acquisition Challenge (DAC) program.

Under the terms of the $3.2m contract, ATK will deliver its guided advanced tactical rocket (GATR) and precision-guided rocket launcher (PGRL) for both environmental and operational evaluation on the USSOCOM’s MH-60L/M rotary-wing platforms.

Manufactured in collaboration with Elbit Systems, the GATR is a 70mm precision system designed for air-to-ground and ground-to-ground missions against soft, lightly armoured, stationary, moving and manoeuvring targets, and for military operations in urban terrain.

Incorporating a semi-active laser seeker similar to the one used in combat-proven joint direct attack munition (JDAM), the system enables pilots to lock-on targets before launch to ensure engagement of only the target of interest, with minimum collateral damage and at reduced operational costs.

Compatible with the existing 2.75in rocket-launcher hardware, the system features a digitally fused M282 multi-purpose warhead that is programmed from cockpits to provide super quick, point detonating fusing to defeat soft targets or delayed fusing for hardened targets penetration.

Available in three, seven and 19-tube versions, GATR is launched from PGRL digital launcher, and supports seamless integration into all fixed and rotary-wing platforms using existing digital and analogue fire control systems to offer digital stores management for all loaded weapons.

Manufacturing.Sector.Is.Making.A.Comeback The Washington Post reports Caterpillar, General Electric and Ford are among the manufacturers “that have announced that they’re shifting some manufacturing operations back to the” US. Economists “are debating whether these stories are a blip - or whether they signal the beginning of a major renaissances for” the manufacturing sector.

Optimists “counter that the logic of a coming renaissance is impeccable. Besides the shrinking wage gap between China and the United States, the productivity of the American worker keeps rising. And the surge in shale gas drilling gives the United States a wealth of cheap domestic energy to bolster industries such as petrochemicals.”

We Know Long Products Improved turnaround on your production cutting orders for bar, tubing or structural shapes. Ryerson high-speed, precision carbide saws deliver close tolerance semi-finished parts in high volumes.

Choose rounds, squares, hexes, tubing, angles, channels or tees. Our inventories include a wide range of grades in carbon, alloy, stainless steel, aluminum, nickel or copper alloys.

Markets Served: • Energy • Mining • Aerospace

• Industrial • OEMs

Grades Stocked: Bar - 4130 / 4140-L80 / 4140-P110 / 4340 / 8620 / 1144 / 1018 / 1045 / 304L / 316L / 17-4 / 6061 / 6063 / 7075 Tube – 4130 / 4140-L80 / 4140-P110 / 4340 / 1026 / Sq Seamless / Rec Seamless / 304L / 316L / 6061 / 6063

Processed To Fit Your Needs: High Speed In House Cutting To Tight Tolerances +/- .020” on Carbon, Alloy and Stainless +/- .063 on Aluminum

We Know Plate Products Ryerson’s full line of metal products, in combination with our wide variety of processing capabilities, can simplify your manufacturing and procurement.

Whether you need a one-of-a-kind component or parts in production quantities, we offer the advantage of one stop shopping to reduce your overall costs and streamline your operations.

Markets Served: • Energy / Oil and Gas • Mining • Aerospace

Grades Stocked: Carbon & Alloy – A36, 516G70, 514, 572G50, AR400 Stainless – All Grades Aluminum – 1100, 6061, 7075, 2024, 7050, CAST TOOL

Processed To Fit Your Needs: • • • • • • • •

Oxy Fuel Cutting – Up to 12” Thick Steel High Definition Plasma Cutting – Up to 3” Thick Carbon and Stainless STD. Plasma Cut Up To 61⁄4” Stainless/Aluminum (Edgestart) Water Jet Cutting Precision Saw Cutting – Up to .005” Cut Tolerance Shearing • Beveling up to 3” Heat Treating • Temper Passing Stress Relieving

www.ryerson.com 6600 Hwy 85, Commerce City, Colorado 80022 303-287-0101 Local | 303-289-7919 Fax 800-332-1857 In State | 800-525-1811 Out Of State

514 W Pickett Circle Suite A, Salt Lake City, Utah 84115 801-820-1180 Phone | 801-820-1181 Fax 866-922-0748 Toll Free

Serving Colorado, New Mexico, Wyoming, South Dakota, Nebraska and Montana

Serving Wyoming, Idaho, Nevada and Utah A2Z METALWORKER

• 25 •

May/June r2013





   

    





A2Z METALWORKER

•

26 •May/June 2013

ALMAR TOOLS, INC A leader in the custom tool manufacturing industry and CNC tool sharpening Manufacture of special end mills, form cutters, step drills, and step reamers Manufacture of special shapes and contours on the cutting edge of technology Dedicated in complex solid carbide form cutters with a prompt delivery Quotes returned same day with PDF drawing

www.almartool.com

Visit the TOOL BUILDER and see how easy it is to get a paperless quote

Distributors, please contact us for more information Short orders email sales@almartool.com phone: 503.255.2763 | fax: 503.255.5720

New.Technologies.Will. Lead.To. More. FuelEfficient.Planes National Geographic News reported that while the Boeing Dreamliner is currently the most fuel-efficient commercial plane, researchers are already looking towards new technologies that go beyond it.

These include the geared turbofan engine, set to debut in June on the Bombardier CSeries plane, new composite ceramics, a “double bubble” fuselage being designed by NASA and MIIT that will be wind tunnel tested at the Langley Research Center later this year, the “flying wing” concept NASA has been developing with Boeing through the X-48 program that just ended this month, and Reaction’s Sabre engine with its high-speed heat exchanger.

GE.To. Use. 3D. Printing.To. Manufacture. Jet. Engine General Electric’s aviation division, the world’s largest supplier of jet engines announced that it would start manufacturing a complex fuel nozzle with “additive manufacturing,” instead of traditional casting and welding.

To build the fuel nozzles, GE machines will shoot laser beams into a bed of cobalt-chromium powder, melting it into individual layers of metal only 20 micrometers thick. Traditionally, the palm-sized part requires welding 20 small pieces together and often results in a lot of wasted material. This 3D printing process uses less material and

therefore reduces production costs. The parts will also be lighter, which GE hopes will yield significant fuel savings.

Automakers.Turn.To. Lighter. Materials,. Innovative.Engineering.To.Build.Lighter.Cars The Detroit News reported, “Automakers are turning to lighter materials and innovative engineering to build cars that weigh less.” Automakers “increasingly are turning to advanced high-strength steel to reduce weight in body structures.” Greg Schroeder, research engineer for the Center for Automotive Research, “expects to see more use of aluminum. Automakers also are making smaller and more efficient engines, which have the added benefit of weighing less.”

Amtrak.Unveils.First.Of.70.New.Locomotives The AP reports, “Amtrak has unveiled the first of 70 new locomotives, marking what the national passenger railroad service said it hopes will be a new era of better reliability, streamlined maintenance and more energy efficiency.” The AP notes that “on a broader scale, the new engines displayed could well be viewed as emblematic of the improving financial health of Amtrak, which has long been dependent on subsidies from an often reluctant Congress.” Meanwhile, “Amtrak said it will be able to pay back a $466 million federal loan for the locomotives over 25 years using net profits from the Northeast Corridor line, where ridership hit a record high last year for the ninth time in 10 years.”

A2Z METALWORKER

• 27 •

May/June r2013

Steen & Sons, Tucked Away in Idaho Falls, Idaho, Epitomizes Automation in Manufacturing. Period. years of training to be an expert machinist, many under the tutelage of his uncles in Southern California, Roy, who had moved his family to Idaho Falls, opened his own shop in 1975. He called it “Steen & Sons”, even though his first son Clayton was only a young baby and Josh wasn’t yet born. Clayton says, “He named the business for the sons he knew he would have.” Roy and his wife had 2 sons and 2 daughters.

Roy Steen, founder and past owner of Steen & Sons Machine Shop, was a long term Smith Machinery customer. Clark Smith, owner of Smith Machinery says, “Roy would call almost every week just to check in. He loved talking to our office staff; Dorothy, Sue and Mindy. He always opened the conversation with “What are you doing?” About 10 years ago, he called to talk to me. Instead of his standard greeting Roy asked, “Clark, how many hours are there in a week?” Before I could answer Roy replied that there were 168 hours in every week. Then quickly followed with; “How many hours do you think our Mazak Multiplex was cutting parts in auto operation?” Again before I could answer, he said “164!”

“Roy reported that during the last week, the Multiplex 6200Y (equipped with a barfeed capable of holding a full 5,000 lb. bundle of material) required only about 4 hours of operator attention; to add coolant, to adjust some offsets and to change a few inserts”.

Roy was an amazing machinist, yet this accomplishment pleased him to no end. And that is what makes Steen & Sons such an extraordinary machine shop. Automation to the “nth degree.”

Sadly, Roy passed away just a few months ago, but fortunately he brought his sons Clayton and Josh into the business many years ago.

Clayton and Josh both agree, “We miss him every day.”

Roy must have been clairvoyant. After many A2Z METALWORKER

•

28 •May/June 2013

The boys were both involved in the family business at a young age. Clayton says, “I always knew I wanted to be a machinist, and that is what I did during high school and then full time for the company once I graduated.”

Josh says, “I wanted to be an accountant, and started college to pursue this career, but I found that I valued working full time and earning an income more.” Today, Clayton follows in the footsteps of their father, as a master machinist (many say the father and son are gifted machinists), and Josh is able to capitalize on his skills with managing the financials of the business. Both Clayton and Josh team up to quote any new work.

Sadly, Roy suffered from a number of illnesses beginning more than two decades ago. Clayton and Josh, by necessity, had to take over the day-to-day operations of the company since

they were in their early 20’s. “We learned from the best in Roy”, Josh said, “and we were forced to become very active early on.”

The company, while still a small shop in the small town of Idaho Falls, has done some remarkable things and has some outstanding qualities. Here are just a few: Production Parts The company has been manufacturing production parts for a number of years. Clayton says, “We make complete roller lifters for aftermarket high performance automobiles.

There are less than a handful of shops located throughout the United States who manufacture this product.” Josh says that Roy secured this business years ago through his connections in the drag racing world. Roy was a chassis builder in the early 1960’s at Frank Huzsar’s Race Car Specialties and a partner in the exotic Herbert, Hampshire & Steen dual-F85-powered fuel dragster - the first in a long series of projects for the Herbert family, which further included Chet’s fourengine, 6,000HP streamliner (nicknamed the “Herbertliner”).

Roy and Clayton were drag racers, and Clayton’s two sons, Alex (16 years old) and Chandler, at 12 years of age, are now 3rd generation racers. Clayton says that so far, the 3rd generation is the most successful in terms of race wins. Josh’s daughters, one who

is 5 and the second who is 8 years old, are still too young yet to become racecar drivers.

Range in Part Sizes and Quantities While the company supports production runs in the quantities of up to 50,000 parts per year, they also regularly support custom designs with engineering and machining of prototypes. Clayton finds the prototypes especially exciting because it challenges his product design expertise.

Josh says, “Our part sizes range from very small, of the size where you could fit hundreds into your hand, to cylinder heads and other large parts for the nuclear industry (pictured above) that weigh thousands of pounds.”

High Tech Equipment and Operation Roy purchased superior equipment early on, and his purchase choices were largely determined by the honesty, fair terms and “after-the-sale” support his company would receive from their machine tool dealer (Smith Machinery). Josh says, “Roy started buying equipment from Smith Machinery nearly 40 years ago, and whenever we can, we purchase from them.”

Clayton continued, “During the 1980s, when the economy faced a downturn and Roy suffered from an illness, the company was struggling with bills. Smith Machinery was one of a few of our suppliers who really worked with Roy to help get the debt paid off.

Josh and I will never forget the companies who helped us when we needed it.”

The company really values Mazak machine tools, and this is evident from the number of machines they own today.Their turning machines include a Mazak QT-8N, QT-15N, QT6G and QT-30 plus two multi-tasking, twin spindle, turn/mill centers a QTN-100II-MSY and the Multiplex-6200Y. They also have several Mazak machining centers, a VTC-16C and two Nexus Vertical Machining centers, a VCN-410A and the popular VCN-510CII. Clayton says, “Our Mazaks have enabled our ability to run lights out 24x7. We do this for our production runs, and it really enables us to be very competitive in our pricing.

Plus, we are living in a low cost of living area, and this too makes our pricing outstanding.”

For more information on Smith Machinery’s premier line of machine tools, go to www. smithmachinetools.com or call them at 801-263-6403.

To learn more about how Steen & Sons can provide high quality, superior parts at a fair price, call them at 208-522-7341.

A2Z METALWORKER

• 29 •

May/June r2013

Step Out from the Revolving Door of Price Wars…

Partner with Plus Ten Stainless Amid the never-ending pursuit of remaining in the forefront of customer’s buying needs, today’s manufacturers are on a constant search for savings. While most suppliers quickly turn to material costs as a primary means of lowering their price, these short term accommodations are seldom sustainable. The constant struggle to protect or win back business seems like a revolving door of competition.

One supplier of stainless steel and aluminum plate has provided its customers a tangible cost reduction that may be less visible in the market, but more maintainable in the long run. Plus Ten Stainless positions itself with a duel advantage by offering Prodec® Plate and by specializing exclusively in precision cold saw cutting.

Plus Ten Stainless offers Prodec® Plate in 304P/304LP and 316P/316LP. Prodec® Plate is a unique version of austenitic stainless steel which is produced for enhanced machinability and exceptional uniformity.  The enhanced chemistry and treatment methods enable Prodec® Plate to maintain tighter dimensional tolerances and produces a superior surface finish.  Prodec® Plate ensures corrosion resistance equal to conventionally produced plate. Prodec® Plate shows the same yield strength, tensile strength,

High Speed Tooling Roughing Finishing

Both the edge quality produced and shape tolerance of Prodec® Plate parts that are precision sawed are above average and maintain standard tolerance of +.060-.000 or better.  Prodec® is designed for faster machining speeds, a minimum of 25% over standard stainless steel plate.  Consistent properties throughout each plate reduce wear and extend the life of carbide tooling.

Cutting Speed sfm(m/min) 304P, 304LP 80-100 (25-30) 100-130 (30-40)

316P/316LP 65-80 (20-25) 80-100 (25-30)

elongation, hardness and toughness as conventionally produced plate. Advanced ladle metallurgy allow for fine adjustments of the composition, amount, size, shape and distribution of the nonmetallic inclusions normally occurring within standard stainless steel.

Compared with conventionally produced stainless steel, Prodec® machinable stainless steel offers significant benefits to manufacturers, including: Faster machining, allowing higher speeds and feeds with either carbide or high speed tooling  Longer tool life  Increased productivity  Better chip breaking  Better dimensional tolerances  Superior machined surface quality  Reduced scrap losses  Consistent performance, enabling on-schedule production Prodec® Plate is designed to cut more economically and with A2Z METALWORKER A2Z METALWORKER

significantly better straightness and final surface quality.

• 30 •May/June 2013 • 70 • May/June 2013

Feed in./tooth (mm/tooth) 0.005-0.008 (0.12-0.20) 0.002-0.004 (0.085-0.10)

While other distributors offer plasma cut parts, Plus Ten specializes exclusively in precision cold saw cutting.  Cold saw cutting virtually eliminates the heat affected zones often incurred as part of the plasma cutting process.  Plus Ten uses carbide tipped blades under a generous flow of coolant.

These highly abrasion resistant blades incur significantly less frequent teeth breakage while maintaining stable performance for maximum productivity and lowest cost per cut.  Cold saw blades transfer the heat generated by cutting to the chips created by the saw blade. Both the metal and the blade itself remain cold.  Square and parallel edges at standard length and width tolerances of +/-.030.

By offering both specialized products and processing, Plus Ten Stainless positions itself as a long term solution for customers.

Take advantage of the savings by contacting Plus Ten Stainless for yourself. Experience the difference that precision cold saw cut stainless steel plate can make in your business. To place your order, call 707-745-4625.

Report. Finds.Top-Paying.

Jobs. In.The. Engineering.

Sector CNN Money reported, “Seven of the top 10 highest-paid college degrees are in engineering,” a report from the National Association of Colleges and Employers finds. Petroleum engineering majors are the highest paid, with starting salaries averaging $93,500, according to the report.

Other highly-paid engineering degrees are in the fields of chemical, aerospace, mechanical, electrical/electronic, communications and technology, with starting pay ranging from $62,200 to $67,600 per year.

Utah. named. Best. State. for.

Business.three.years.in.a.row Third time’s the charm! Forbes has picked Utah as the Best State for Business for the third year running. How’s that for bragging rights?

Since 2006, Utah’s economy has expanded 2.3 percent annually. This makes Utah’s economy fifth best in the nation, and our economic outlook is one of the most optimistic as well.

Several things make Utah ideal for both existing and new businesses, including the five percent flat corporate tax rate, a favorable regulatory climate and the state’s talented labor force.

A big draw for companies is Utah’s young, educated workforce. A third of the state’s workforce is bilingual (according to EDCUtah), and that is a major perk for companies wanting to gain a presence in the global market. This fact likely stems from many people learning a second language while abroad on Mormon missions.

Utah’s regulatory environment also ranked in the third spot.

“Utah is less likely to reward frivolous lawsuits or hand out excessive judgments,” says report co-author Jason Sorens. “Utah’s health insurance regulations are generally light, resulting in less costly policies and more choice for people in the small group and individual markets.”

Another plus is that energy costs in Utah are 29 percent below the national average. Utah is also one of seven states to maintain a triple-A

1974 Bucktail Lane • Sugar Grove, IL 80554 1-888-289-3367 • www.EDMNetwork.com inf@EDMNetwork.com bond rating from the three rating agencies.

“We have a very fertile environment for entrepreneurs and business,” said Gov. Gary Herbert.

So it’s safe to say that Utah’s business environment is worth its weight and more. Shall we go on?

Thanks to Utah’s business-friendly environment, many national and international companies have opened and expanded to Utah, such as eBay, Goldman Sachs, Oracle, Proctor and Gamble, and Adobe, which recently opened its new state-of-the-art LEED Gold certified facility in Utah County.

Forbes‘ ranking is based on six vital factors for businesses: costs, labor supply, regulatory environment, current economic climate, growth prospects and quality of life.

A2Z METALWORKER

• 31 •

May/June r2013

The SLS booster PDR is a significant step toward providing the necessary technical and programmatic information needed for NASA to obtain approval to proceed with development of the Space Launch System—which will support a variety of missions of national and international importance.

ATK has 29 key suppliers across 16 states: Alabama, Arizona, California, Connecticut, Indiana, Kentucky, Massachusetts, Minnesota, New Jersey, New York, North Carolina, Ohio, Pennsylvania, Texas, Utah and Wisconsin.

Samsung.Insources.Components.On.Galaxy.

S.4.To.Keep.Price.Down The Wall Street Journal reports that Samsung Electronics is increasingly supplying the components for its smartphones itself.

That is, according to a report by IHS Inc., allowing it to get the cost of production of its Galaxy S 4 at about $237 per unit very close to that of Apple’s cost of $217 per unit for its iPhone 5. The article offers some detail on the sourcing and price of several components.

Eco-Friendly.Galaxy.Wastes.Nothing.to.Build.

Stars ATK.Solid.Rocket.Boosters.Complete.Major.

Space.Launch.System.Program.Milestone

beyond low-earth orbit.

ATK has successfully completed its solid rocket booster Preliminary Design Review (PDR) with NASA for the new Space Launch System (SLS).The PDR milestone indicates the booster design is on track to support first flight of the SLS in 2017. The SLS vehicle will support NASA’s human spaceflight exploration to all destinations

“This is a tremendous milestone for ATK as we work toward building the boosters for our country’s Space Launch System,” said Charlie Precourt, vice president and general manager of ATK’s Space Launch division.

“NASA’s SLS will enable human exploration for decades to come.”

With the successful completion of PDR, the SLS booster design can now proceed with the associated activities required to advance the design toward Critical Design Review (CDR). Additionally, a ground static firing of qualification motor-1 is planned for later this year at ATK. “The booster PDR was successful and speaks to the importance of a collaborative design process with our NASA customer” said Fred Brasfield, ATK vice president, Next-generation Booster.

A2Z METALWORKER

•

32 •May/June 2013

Scientists have found what may be the most environmentally friendly galaxy ever seen, a galactic star factory that operates with a nearly 100-percent efficiency rate. It is located about 6 billion light-years from Earth.

NASA unveiled the galaxy discovery last month, one day after Earth Day, and dubbed the distant galaxy, called SDSSJ1506+54, the “greenest” ever seen. It was spotted by NASA’s Wide-field Infrared Survey Explorer (WISE) telescope.

Most galaxies use just a small fraction of their available fuel to make stars, but SDSSJ1506+54 is quickly consuming all its gas for star formation. And while stars tend to form in discrete knots of activity in the spiral arms of most galaxies, in this case, gas has collected in the galaxy’s center, where a furious riot of star formation is taking place.

“We are seeing a rare phase of evolution that is the most extreme — and most efficient — yet observed,” astronomer Jim Geach of McGill University, who led the study, said.

New stars form when gas condenses under the weight of gravity, squeezing atoms to the point that nuclear fusion ignites. But when stars form, their powerful radiation blows gas outward, counteracting the condensing action of gravity, making it harder for the gas around them to form new stars.This effect limits the maximum possible rate of star formation, even in galaxy SDSSJ1506+54.

The researchers first noticed the galaxy in all-sky survey data collected

by NASA’s WISE space telescope, which ended its mission in 2011. In infrared light, the galaxy glows with the brightness of 1 trillion suns.

2 MONTHS TO FULFILL. 1 a51nx HMC.

WHEN NUMBERS MATTER: 6 NEW JOBS. 2 MONTHS TO FULFILL. 1 a51nx HMC.

Making the parts that really matter takes a horizontal machining center that delivers what matters most: faster cycle times, greater reliability and higher-quality Making the parts that really matter takes results. Which is why a Makino HMC is a horizontal machining center that delivers the only realmost: choice for cycle the production what matters faster times, parts that matter most. greater reliability and higher-quality results. Which is why a Makino HMC is It’sonly the speed you need handle the jobs the real choice for thetoproduction that matter.

The Makino a51nx and a61nx. parts that matter most.

makino.com It’s the speed you need to handle the jobs that matter. The Makino a51nx and a61nx.

WHEN YOU MAKE WHAT MATTERS

makino.com

www.moncktons.com Denver Showroom:

SLC Showroom:

637 Osage Street Denver, CO 80204 Ph: 303.571.4933

3676 W. California Ave. SLC, Utah 84104 Ph: 801.886.2221

For more information on all Makino products in Arizona, contact WHEN YOU MAKEat 602-228-0347 WHAT MATTERS David Gundersen or David.Gundersen@makino.com.

For more information on all Makino products in Arizona, contact David Gundersen at 602-228-0347 or David.Gundersen@makino.com.

A2Z METALWORKER

• 33 •

May/June r2013

NASA.chief.to.lawmakers:.Heavy.lift.rocket. ‘on.schedule’

7130 West 117th Avenue, Unit D-4, P.O. Box 1904, Broomfield, CO 80038

Call Jim Daldos Or Virginia Ebert Today 303-466-7342 • Fax 303-465-2117 We Specialize in Structural and Sheet Metal Fabricating Equipment. We Can Provide Engineering and Consultation for Your Individual Needs.

PRESS BRAKES BANDSAWS ANGLE ROLLS PRESS FEEDS PUNCHES & DIES COLD SAWS BRAKE TOOLING SHEAR BLADES WATERJET COPING TOOLS

SHEARS IRONWORKERS PLATE ROLLS PUNCH PRESSES TURRET PUNCHES TUBE BENDERS SPOT WELDERS BURNING TABLES SAW BLADES NOTCHING TOOLS

www.fabricatingequipmentsales.com

BMSC, LLC

Business Management Systems Consulting

Prepare for ISO 9001/ AS9100 Certification For Only $3500! $3500!

Contact Bretta Kelly Today!

602.445.9400 www.businessmsc.com

“When Bretta told me that ISO shouldn’t be treated as “Rocket Science” I started listening. She was able to back it up with explanations we could understand. The difference we found with Bretta over other consultants we have talked to is that she herself has gone through the pain of ISO internally when working in quality departments. She is the President of her own company and is a certified auditor.”

George G. Crouch, Advotech Company A2Z METALWORKER

c

.. ing

•

34 •May/June 2013

Jet Processing is now

NASA’s administrator tried to reassure wary lawmakers his agency isn’t foot-dragging on developing a rocket to take astronauts into deep space by the next decade.

“We need a 70 metric-ton vehicle and we are on schedule, on target and on cost to provide that 70 metric-ton vehicle,” Charles F. Bolden Jr. told members of the Senate Appropriations subcommittee that oversees NASA funding.

NASA is asking for $17.7 billion for fiscal 2014, which begins Oct. 1. That includes $2.73 billion to develop the Space Launch System (SLS) consisting of an Orion multi-purpose crewed vehicle and the deep-space rocket that will carry it.

Bolden said SLS remains one of the agency’s top three priorities, along with development of the James Webb Space Telescope and replacement of the shuttle, known as the Commercial Crew program.

NASA simply doesn’t need more than the $2.73 billion it’s asking for SLS, he told subcommittee members.

“We are confident that we can carry out his program with the budget that we had requested.” he said.

More.optimism.emerges.on.U.S..jobs.front A positive U.S. unemployment report last month has gotten further confirmation as a Conference Board compilation of labor indicators for April points to more job gains moving ahead.

“On average, employment has grown almost as fast as [gross domestic product] over the past three years, and that is likely to continue into the third quarter of 2013,” said Gad Levanon, The Conference Board’s director of macroeconomic research.

Agency.Says.Natural.Gas.Expected.To.Make.

Up.2.5.Percent.Of.Transport.Fuel.By.2018 Bloomberg News reports natural gas will boost “its share of road transport fuels to 2.5 percent in 2018 from 1.4 percent in 2010 as consumers look for cheaper, cleaner forms of propulsion, according to the International Energy Agency.”

Additional “displacement of oil as the leading transport fuel is being held back by the need for ‘substantial’ infrastructure,” the IEA said in its medium-term oil-market report.

www.resourcemfg.com We’re Not Just A Nationwide Staffing Firm.

We’re A Nationwide Staffing Firm Specializing in Manufacturing.

That’s All We Do. Period.

• CNC Programrs • Press Operators • CNC Machinists • Assemblers • Manual Machinists • Quality Control Inspectors • Maintenance Mechanics • MIG/TIG/Stick Welders

Call One of Our Local Offices Today.

UT, Salt Lake City 3981 S 700 E Suite 9 Salt Lake City, UT 84107 Phone 801-265-1999 Fax 801-265-2005

CO, Colorado Springs 5067 N Academy Blvd Colorado Springs, CO 80919 Phone 719-599-7400 Fax 719-277-0640

UT, Ogden 4387 S Harrison Boulevard # C-1 Ogden, UT 84403 Phone 801-476-1999 CO, Longmont Fax 801-476-1995 1707 North Main Street # 402 Longmont, CO 80501 Phone 303-532-1882 Fax 303-772-4669 CO, Loveland 1635 Foxtrail Drive Loveland, CO 80537 Phone 970-669-7371 Fax 970-669-7443 A2Z METALWORKER

• 35 •

May/June r2013

Lockheed.Martin.Poised.to.Win.Orders.for.Up. to.71.F-35s Lockheed Martin Corp. may receive a U.S. order in June for as many as 60 F-35 jets, consolidating the sixth and seven production contracts for the costliest weapons system, according to the Pentagon’s program manager.

Metalworking is Your Business.

Insuring Metalworkers is Sentry’s Business.

Find out how Sentry‘s expertise can help keep your metalworking facility safe, reduce your losses and hold the line on insurance premiums. For your insurance and safety needs, CALL TODAY!

1-877-373-6879 sentry.com

Property and casualty coverages and safety services are underwritten, issued and/or administered by a member of the Sentry Insurance Group, Stevens Point, WI. For a complete listing of companies, visit sentry.com. Policies, coverages, benefits and discounts are not available in all states. See policy for complete coverage details. ® Captain John Parker photo

40-3072

S Specialty Specia ialt lty Steel Steel S Service, Inc.

We stock a large variety of the metals you need.

-Tool and Die steels -Alloys and Carbon -Aluminum Plate As well as being the authorized distrubutor of Precision Marshall and Latrobe Steel products.

-Production Cutting -Aluminum Plate Cutting -Cold Sawing - Delivering to Salt Lake, Utah, Davis, and Weber counties everyday

334 W. 800 S. Salt Lake City, Utah 84101 Toll Free 1-800-890-5950 Telephone (801) 539-8252 Fax (801) 539-8311 Email Scott@specialtysteelservice.com

A2Z METALWORKER

•

36 •May/June 2013

“We believe we can have a negotiation settlement” by May 31 “followed by final contract award in June,” Air Force Lieutenant General Christopher Bogdan, manager of the Pentagon’s F-35 program, said.

The Pentagon has worked to protect the F-35 from the federal spending cuts called sequestration. Some of the money for the next group of fighters already has been obligated, sparing those funds from the across-the board reductions. Other funds may be subject to the cuts, which Air Force, Navy and Pentagon officials continue to assess.

The F-35’s estimated cost for a fleet of 2,443 aircraft has risen to $395.7 billion, up 70 percent from $233 billion in 2001 in current dollars, according to the Pentagon.

729898 1/18/11

“Small Sma l enough en ugh tto care, are La Large enough to serve.”

Lar

We offer a variety of services, including:

The contract may be valued at about $9 billion, according to a person familiar with negotiations between the Pentagon and Lockheed who declined to be named discussing the private talks. The number of F-35s may rise to as many as 71 if orders from other nations are included.

Bogdan, who has pressed Lockheed to do a better job containing costs for the F-35, said the Bethesda, Maryland-based company will absorb a greater share of any overruns than under previous contracts.

Bogdan gave a generally upbeat assessment of the F-35’s progress in his statement.

“The basic aircraft design is sound and we can deliver on our promises,” Bogdan said. “Our progress continues at a slow but steady pace.”

Frank Kendall, the Pentagon’s chief weapons buyer, told reporters that “I feel much more comfortable” about the F-35 program than “I did a year and half ago.”

Lockheed Martin’s performance since a strike of its aerospace workers ended in July “has been fairly stable and the program has seen marked improvement in design stability,” Bogdan said.

Bogdan was less optimistic on development of the jet’s software. He said he had “moderate” confidence in Lockheed’s capability to deliver mid-level versions needed to train on the aircraft and give it an initial combat capability.

Lockheed and its subcontractors “still need to improve both the speed and quality of software development” to “catch up from previous software delays,” he said.

The fighter jet accounted for 14 percent of the company’s sales last year, according to a regulatory filing.

Rockwell. Collins. Delivers.

Its. 20,000th. Air.Transport.

Weather.Radar Rockwell Collins achieved a significant milestone by delivering its 20,000th air transport weather radar system, which leverages more than 50 years of extensive research and development for enhanced safety and greater flight efficiency. United Airlines took delivery of the radar â&#x2C6;&#x2019; Rockwell Collinsâ&#x20AC;&#x2122; award-winning and marketleading MultiScanâ&#x201E;˘ Threat Detection System â&#x2C6;&#x2019; on a new Next-Generation Boeing 737.

Rockwell Collins also announced that United Airlines has selected MultiScan for 73 Next-Generation Boeing 737 aircraft.

The selection includes Rockwell Collinsâ&#x20AC;&#x2122; full suite of communication, navigation and surveillance avionics. Deliveries will begin later this year.

Rockwell Collinsâ&#x20AC;&#x2122; MultiScan Threat Detection System is a fully automatic airborne weather radar system that combines the latest weather science with advanced engineering concepts to identify and analyze thunderstorm cells, and display the actual weather threat. The end result is fewer flight diversions, which leads to lower fuel burn, and greater passenger comfort due to minimizing unexpected turbulent encounters.

Custom Machine-Ready Blanks Increase Shop Capacity, Reduce Setup Time and Moreâ&#x20AC;Ś

Letâ&#x20AC;&#x2122;s discuss what they can do for you, over coffee.

It might be the best cup you ever had.

Custom Machine-Ready Blanks from TCI Precision Metals will save you time and money while increasing your shop capacity by 25% or moreâ&#x20AC;&#x201C;without adding overhead. s ,OAD PRECISION -ACHINE 2EADY "LANKS DIRECTLY ONTO YOUR #.# MACHINES s %LIMINATE CUTTING GRINDING SQUARING AND OUTSIDE PROCESSING s !LUMINUM STAINLESS ALLOY STEELS AND MORE s 2EDUCE SCRAP #ALL TODAY OR VISIT US ON THE 7EB TO REQUEST A QUOTE AND RECEIVE OUR SPECIAL COFFEE MUG THAT HOLDS MORE

plus a Starbucks card to fill it up.

Good Parts. On Time. Period.

s WWW TCIPRECISION COM ÂĽ 4#) 0RECISION -ETALS !LL RIGHTS RESERVED

Itâ&#x20AC;&#x2122;s amazing what can be accomplished over a cup of coffee.

TCI Delivers Daily Throughout the West All new Boeing 787 Dreamliners, Boeing 747-800s and Boeing Business Jets delivered today come standard equipped with Rockwell Collinsâ&#x20AC;&#x2122; MultiScan.The advanced in New Mexico, but Virgin Galactic executives have said it will come radar system is also a selectable feature for other air transport aircraft, after testing is complete and it secures approval from the government.â&#x20AC;? including Airbus A320s, A330s and A340s, and Boeing 777s and NextGeneration 737s.

Siemens. Launches.Training. Initiative. In. 22.

Virgin. Galacticâ&#x20AC;&#x2122;s. SpaceShipTwo. Makes. Its. First.Powered.Flight The AP reports, â&#x20AC;&#x153;Virgin Galacticâ&#x20AC;&#x2122;s SpaceShipTwo made its first powered flight last month, breaking the sound barrier in a test over the Mojave Desert that moves the company closer to its goal of flying paying passengers on brief hops into space.â&#x20AC;?While only lasting 10 minutes, the flight was called a â&#x20AC;&#x153;major stepâ&#x20AC;? towards flying into space by the end of the year as Virgin Galactic plans. However, â&#x20AC;&#x153;no date has been set for the first commercial flight from a custom-designed spaceport

Cities

The AP reports, â&#x20AC;&#x153;A job training initiative is being offered to help military veterans with engineering and manufacturing backgrounds transition to the civilian workforce. Siemens Corp. says the program was launched by Siemensâ&#x20AC;&#x2122; product lifecycle management software business in 22 cities across the country.â&#x20AC;?

It â&#x20AC;&#x153;provides free training in digital lifecycle management and computer-aided design, computer-aided manufacturing and computeraided engineering software technology.â&#x20AC;?

A2Z METALWORKER

â&#x20AC;˘ 37 â&#x20AC;˘

May/June r2013

Alcoa. Plans.To. Expand.To. Meet. Demand.

From.Automakers Alcoa Inc. plans a $275 million expansion of its Blount County operation that officials said will help insure the company remains a key player in the local economy for decades.The aluminum company announced last month that it will expand its rolling mill operation in Alcoa to meet growing demand for light, durable and recyclable aluminum sheet for the automotive industry.

Iraq.to.Receive.Final.

Three.C-130Js...

The Iraqi Air Force (IQAF) is set to receive its final three Lockheed Martin C-130J Super Hercules airlifters. Aircraft number 5721 was the first of these aircraft to be ferried from Lockheed Martin’s production facility. All three C-130Js were ferried to U.S. Air Force bases prior to delivery to the IQAF. The IQAF, a legacy C-130 operator, received its first C-130J in December 2012 and will have a total of six C-130Js in its new Hercules fleet.The IQAF uses the airlifters for intra-theater support for its troops and to provide humanitarian relief in various locations. info@dcm-tech.com

Business.Conditions.Report:.May.2013

laser cutting welding forming tube bending

According to the May 2013 Precision Metalforming Association (PMA) Business Conditions Report, metalforming companies anticipate steady business conditions during the next three months.

Conducted monthly, the report is an economic indicator for manufacturing, sampling 110 metalforming companies in the US and Canada.

howellprecisionaz.com

Metalforming companies expect little change in incoming orders during the next three months, with 34% anticipating an increase in orders (down from 37% in April), 47% predicting no change (compared to 42% last month) and 19% expecting a decrease in orders (down from 21% in April).

MENTION CODE

The May report shows that 63% of participants predict that economic activity will remain unchanged during the next three months (up from 56% in April), 23% believe that activity will improve (down from 28% in April) and 14% forecast that activity will decline (compared to 16% in April).

“A2Z”

AND RECEIVE

5% OFF YOUR NEXT PURCHASE ORDER

623.582.4776 A2Z METALWORKER

•

38 •

May/June 2013

Average daily shipping levels increased in May. Forty-one percent of participants report that shipping levels are above levels of three months ago (up from 34% in April), 41% report that shipping levels are the same as three months ago (compared to 44% in April), and 18% report a decrease in shipping levels (down from 22% in April).

The percentage of metalforming companies with a portion of their workforce on short time or layoff dipped to 11% in May, down from 14% in April. The May figure is similar to one year ago, when 10% of metalformers reported workers on short time or layoff.

WATER-JET CUTTING Providing...Tighter Tolerances / Minimal Machining Table Capacity of 120” Wide x 360” Long Up to 6” Thick Cutting Capacity

HIGH DEFINITION PLASMA BURNING

CONVENTIONAL PLASMA BURNING

Up to 5/8” thk Stainless & 1 1/4” thk Carbon Table Capacity of 120” Wide x 390” Long

Up to 6” Thickness Table Capacity of 132” Wide x 564” Long

Available Products...

STAINLESS: 304H, 304L, 316L, 317L, 321, 347, 904L, 2205, 2507, 254-SMO, LDX 2101 CARBON: A35, W44, 514, 516-70, 572-50, 588, API-2H-G50 ALUMINUM: 5086, 5454, 6061, 7075, 7050, 2024

Range of Sizes...

THK: 3/16” to 6” WIDTH: 48” to 120” LENGTHS: 96” to 528”

Value Added Services...

LASER CUTTING, POLISHING, GRINDING, HEAT TREATING, SAW CUTTING, FORMING, ROLLING, SHEARING, BEVELING

1-888-726-6385

samuelplate@samuel.com

www.samuel.com A2Z METALWORKER

• 39 •

May/June 2013

percent from the previous month, and was unchanged year over year.

Separately, the Equipment Leasing & Finance Foundation’s Monthly Confidence Index (MCI-EFI) for May is 56.7, an increase from the April index of 54.0, reflecting industry participants’ increasing optimism despite continuing concerns over the economy and the impact of federal policies on capital expenditures.

ELFA President and CEO William G. Sutton, CAE, said: “Both performance indices—the MCI as an indicator of future optimism about the direction of the U.S. economy, and the MLFI-25’s growth trend in new business activity—provide solid evidence that the demand side of the capital investment equation continues to pick up as the broader economy strengthens. It is our hope that this trend pushes into the second half of the year.”

Paul J. Menzel, President and CEO, Financial Pacific Leasing, LLC, said: “Over the last four years businesses of all sizes have pursued a defensive strategy of austerity by right sizing their balance sheets, maximizing operating efficiencies, and optimizing cash flow, all while top line revenue growth has remained weak. This has kept many borrowers and lessees on the sidelines despite historically low rates. The anemic revenue story may be coming to an end as businesses seem to be going on the offensive and investing for growth, as this month’s MLFI data reflects.”

Equipment. Leasing. and. Finance. Association’s.Survey.of.Economic.Activity:.Monthly.

Leasing.and.Finance.Index.April.New.Business. Up. 23. Percent.Year-over-year,. Up. 10.

Percent.Month-to-month The Equipment Leasing and Finance Association’s (ELFA) Monthly Leasing and Finance Index (MLFI-25), which reports economic activity from 25 companies representing a cross section of the $725 billion equipment finance sector, showed their overall new business volume for April was $7.5 billion, up 23 percent compared to volume in April 2012. Month-over-month, new business volume was up 10 percent from March. Year to date, cumulative new business volume was up eight percent compared to 2012.

Receivables over 30 days were unchanged in April from the previous two months at 2.0 percent. They were down from 2.7 percent in the same period in 2012. Charge-offs were unchanged from March at the all-time low of 0.3 percent.

Credit approvals totaled 77.2 percent in April, down from 78.4 percent in March. Seventy-two percent of participating organizations reported submitting more transactions for approval during April, up 50 percent from the previous month.

Finally, total headcount for equipment finance companies was up three A2Z METALWORKER

•

40 •May/June 2013

About the ELFA’s MLFI-25 The MLFI-25 is the only index that reflects capex, or the volume of commercial equipment financed in the U.S. The MLFI-25 is released globally at 8 a.m. Eastern time from Washington, D.C., each month on the day before the U.S. Department of Commerce releases the durable goods report. The MLFI-25 is a financial indicator that complements the durable goods report and other economic indexes, including the Institute for Supply Management Index, which reports economic activity in the manufacturing sector. Together with the MLFI-25 these reports provide a complete view of the status of productive assets in the U.S. economy: equipment produced, acquired and financed.

The MLFI-25 is a time series that reflects two years of business activity for the 25 companies currently participating in the survey. The latest MLFI-25, including methodology and participants is available below and also at http://www.elfaonline.org/Research/MLFI/ The MLFI-25 is a barometer of the trends in U.S. capital equipment investment. Five components are included in the survey: new business volume (originations), aging of receivables, charge-offs, credit approval ratios, (approved vs. submitted) and headcount for the equipment finance business.

The MLFI-25 measures monthly commercial equipment lease and loan activity as reported by participating ELFA member equipment finance companies representing a cross section of the equipment finance sector, including small ticket, middle-market, large ticket, bank, captive and independent leasing and finance companies. Based on hard survey data, the responses mirror the economic activity of the broader equipment finance sector and current business conditions nationally.

Be a Part of Manufacturing’s Momentum

AT T E N D EXHIBIT SPONSOR ADVERTISE

WESTEC has moved from March 2014 to the fall 2013. Discover the innovative technology and solutions that will change the future of manufacturing.

800.733.3976 | westeconline.com

For exhibiting and attending details, scan this code with your smartphone’s QR reader.

A Z METALWORKER • 41 • WESTEC is produced by SME. 2

May/June r2013

If You...

A total of eight small-calibre freeflying Qassam-style rocket targets were successfully destroyed by the prototype laser system during their flight at a range of approximately 1.5km during the testing carried out in March and April.

STAMP WELD LASER DRAW ROLL CUT

BEND PUNCH FOLD FORM SPIN SAW

The system had also intercepted 11 small-calibre rocket targets in simulated flight, while being tethered to a cable at a range of 2km, while also engaging an unmanned aerial system (UAS) target in flight at a range of 1.5km during flight testing against representative airborne targets in November 2012.

WE’VE GOT

We’ve got what you need to get “IT” done!

• Specialty Stainless & High Temperature Alloys • In-house leveling, shearing, laser cutting, slitting & edging • Experienced sales staff • Online ordering Stainless Steel: Nickel Alloys:

888.282.3292 sales@upmet.com www.upmet.com

17-4 17-7 301 301¼ 301½ 301FH

302 303 304/304L 316/316L 321 347

410 416 430 440 446

A-286 263 625 718 X750 800 H/HT Alloy X

“High-energy lasers complement kinetic energy systems and have unique attributes.”

Cobalt Alloys: 188 L605 Prodec® Plate: 304/L 316/L

Researchers.Use.3D.Printer.To.Make.Bionic.Ear Discovery News reports, “Three-dimensional printing has been used to make a jawbone, a functioning bladder, as well as a model kidney, and there have been successful experiments in printing tissue such as skin cells for burn treatments and even the external part of an ear.”

Now, researchers “at Princeton University have, for the first time, printed not only the tissue for an ear but also the electronic components that would make an artificial sensory organ work. It’s the first step toward printing organs that behave like the real thing.”

Lockheed’s.ADAM.laser.system.validates.capability.against.free-flying.rockets Lockheed Martin’s area defence anti-munitions (ADAM) laser system has successfully demonstrated its ability to counter Qassam rockets during a series of test flights at an undisclosed location.

A2Z METALWORKER

•

42 •May/June 2013

Equipped with a 10kW fibre laser, the ADAM is a portable, groundbased laser system designed to safeguard military high-value installations including, forward operating bases (FOBs) against a wide range of close-in improvised rockets, such as Qasam, and unmanned aerial system (UAS) threats.

With a tracking range of more than 5km, the system is capable of precisely locating targets in cluttered optical environments, while the fibre laser helps destroy targets located up to 2km away.

Lockheed Martin Strategic and Missile Defense Systems advanced programs vice-president Doug Graham said: “High-energy lasers complement kinetic energy systems and have unique attributes, including very low-cost per engagement, a virtually unlimited ‘magazine’ and minimal collateral damage.”

Manufactured under the company’s independent research and development funding programme, the modular system can be transported easily and is self-contained to destroy rockets as a standalone system and also engage UAS with an external radar cue.

Bella. Energy. Announces.

Completion. of. 1.65. MW. Salt.Palace.Solar.Array Bella Energy is proud to announce the completion of the 1.65 megawatt solar array atop the Calvin L. Rampton Salt Palace Convention Center in Salt Lake City, UT. Covering 3.85 acres of rooftop, the project is currently the largest solar photovoltaic system on Rocky Mountain Power’s entire electric grid. It is also the largest solar array in the State of Utah.

The 6,006 solar modules will produce an estimated 2.3 million kilowatt hours of electricity in its first year, covering approximately 17% of the Salt Palace’s annual electrical usage. Project development began in 2010, construction began in December of 2011 and took about 6 months to complete. The array required more than 14,000 man-hours from local labor.

There were zero change orders, zero OSHA violations and no injuries. The project is the result of efforts from multiple parties including, Salt Lake County, Bella Energy, CarbonFree Technology, Chase Bank, Rocky Mountain Power, the National Development Council, Zions Bank, Ballard Spahr, Suntech, Solectria Renewables, and Unirac.

Financing the 1.65 megawatt project was achieved using a mix of grants, bonds, public and private capital. The project also holds the distinction of being one of the first solar projects in the nation to utilize the New Market Tax Credit. “Financing this project required a lot of sweat equity and 14 months of hard work to develop a funding package that would satisfy the needs each party,” said Andrew McKenna, Executive Vice President of Bella Energy.

Pentagon:.F-35.Program.Costs.Fell.$4.5.Billion.

Last.Year The total price tag for the F-35 Joint Strike Fighter program fell $4.5 billion in 2012, according to a new government report.

This marks the first time in the F-35’s checkered history that estimators have lowered the projected cost of the program, the Pentagon’s most expensive acquisition effort.

The pricing, unveiled in the Pentagon’s annual selected acquisitions

report (SAR), now projects development and procurement of the fifth-generation stealth fighter at just over $391 billion, still tens-ofbillions of dollars more than originally projected.

The F-35 is just one of 78 DoD acquisition programs reviewed in the SAR. Collectively, the cost of those programs grew $39.6 billion — or 2.44 percent — in 2012.

Frank Kendall, the undersecretary for acquisition, technology and logistics, said it was the “first time in my memory” no program in the SAR breached any of the federal spending caps. If a program breaches a so-called Nunn-McCurdy threshold, it could be canceled unless recertified by DoD. The Pentagon’s Better Buying Power initiative, an acquisition reform effort designed to improve the weapons buying process and get DoD more bang for its buck, has helped improve program performance.

A2Z METALWORKER

• 43 •

May/June r2013

X-47B:. Navy. Drone. Launches. Off.Aircraft.

Carrier;.A.New.Tailhook.Era

INTRODUCING...“NEW” PRODUCTS FROM THE NAME YOU CAN TRUST... ®

IC R O OO super carbide tools CO EFFE ST C TOOLITIVE NG

HIGH QUALITY...ULTRA PRECISION...

QUICK-CHANGE Q UICK K CHA ANGE O OLING SYS SYSTEM YSTEM Y YS S TOO TOOLING

NEW QUALITY...Through QUALITY...

ALITY Through ALITY...

Manufacturing Excellence!

BORE GROOVE FACE GROOVE PROFILE THREAD

It’s hard enough for a human pilot to take off from the cramped and pitching deck of a US Navy aircraft carrier.

Last month, for the first time in history, a Remotely Piloted Aircraft did it.You can bet that military leaders in Beijing and Tehran sat up and took note as the batwinged X-47B drone took off from the nuclear-powered aircraft carrier USS George H.W. Bush.

®

i cr o QuIk QUICK CHANGE TOOLING

Unique “3 POINT” Locking/Locating Tooling System Engineered for Maximum Tool Rigidity and Centerline Repeatability within +.0005” from Tool to Tool!

Reduce Machine...Setup, Downtime, Tooling Costs, Tooling Inventories while Boosting Productivity!

Tools Manufactured with the... Exclusive...

MICRO 100 Proprietary Process!

PROUDLY MADE IN THE

MICRO 100 TOOL CORPORATION 1410 E. Pine Avenue Meridian, ID. 83642

800-421-8065

USA

208-888-7310

www.micro100.com

The aircraft that took off, the Northrop Grumman-built X-47B UCAS (Unmanned Combat Air System), is just the trailblazer for an actual combat-ready drone, the UCLASS (Unmanned Carrier-Launched Airborne Surveillance and Strike System), that the Navy plans to start developing in earnest this year. (The draft “request for proposals” is out and industry folks expect the final RFP to come out in the next few weeks). So, if the Navy gets its way — and sufficient funding, which is hardly a foregone conclusion – today’s modest 65-minute flight from the carrier at sea to the Navy’s celebrated “Pax River” test site ashore is just a taste of things to come.

Contact your local Authorized Micro 100 Distributor or Sales Representative today for more details!

Max Steinbach Micro 100 Tool Corporation Northwest Sales Manager

Part Density.

Phone: Fax: Email:

800-421-8065 208-888-2106 msteinbach@micro 100.com

Need we say more?

“People will say ‘wow,’” the Navy’s senior admiral, Chief of Naval Operations Jonathan Greenert, said a few weeks ago.

Why do Adm. Greenert and the rest of the Navy brass care so much?

Two words, though they won’t often say them on the record: China and Iran. Both nations are building elaborate layered defenses of sophisticated radars, advanced anti-aircraft missiles, shore-based anti-ship cruise missiles, and ballistic missiles like a smart-bomb version of Saddam Hussein’s old SCUDs, all designed to keep US carriers and the aircraft they currently carry at bay. Beijing also just rolled out a new drone of its own and announced it’s creating a new carrier-based air force, but China’s second-hand aircraft carrier is still a work in progress.

Even the stealthy F-35 Joint Strike Fighters that the Navy, Marines, and Air Force are now beginning to buy will find it a challenge to penetrate these so-called “anti-access/area denial systems”.The problem:While the F-35s themselves are hard to detect on radar, the lumbering tanker planes that refuel them in mid-air are definitely not. Neither are the ground bases and aircraft carries from which the F-35s must launch.

Part Number: G12146D221M

Learn more at 5axisfixtures.com 1(858)-505-0432 A2Z METALWORKER

•

sales@5axisfixtures.com

44 •May/June 2013

Based on the different ranges of missiles available to Tehran and Beijing to keep us at arm’s length, Rep. Randy Forbes, the chairman of the House subcomittee on Seapower, told me recently in his Capitol Hill office, “we can only cover about a third of Iran and we can’t even get to China’s shore.”

To solve the penetration problem, the Air Force has a handful of B-2 stealth bombers — hard for radar to detect but relatively slow and vul-

nerable once the enemy does get a track — and is investing in a long-range, high-speed, radar-evading future bomber.The B-52s possess the range and payload, but they’re slow, highly visible on radar, and generally vulnerable to enemy aircraft and anti-aircraft missiles. And no matter what the exact type, heavy bombers can’t fit on a carrier flight deck.

Enter the drones (known to much of the military aviation community as Remotely Piloted Aircraft). An unmanned aircraft can be built much lighter and offer more room for fuel than one that has to accommodate a human. It can stay in the air longer than a human being can endure, and, if it does get shot down, there won’t be a military officer walking slowly up to anyone’s front porch with a grim expression and some tragic news. The future UCLASS drones will be primarily reconnaissance aircraft, scouting stealthily ahead of the main force to find targets for manned aircraft and cruise missiles, but they’ll be able to carry smart bombs as well. So — if it materializes on time, on schedule, and with the expected performance, always a trick in government programs — UCLASS will give the Navy a capability for long-range strike such as it’s never had.

So the X-47B launch is “a seminal event in the history of carrier aviation,” Seapower chairman Forbes said in an email to BreakingDefense today. “The UCAS-D/UCLASS programs will ensure the relevancy of the carrier air wing for the 21st century by providing an asset with the range, persistence and stealth needed to operate in increasingly contested environments…..This is a tremendous first step on the path toward forever altering the nature of naval aviation.”

A caveat: The UCLASS is not a silver bullet for future warfare. No single weapons system, manned or unmanned, ever is. From the Navy and Air Force standpoint, they’re just one aspect of a complex concept known as “AirSea Battle.”

“UAVs [unmanned air vehicles] are a part of the future of military aviation, not the future of military aviation,” said Ed Timperlake, a contributor to our site and a former Marine Corps fighter pilot who’s worked in the Pentagon and Congress.

Ultimately, in fact, no amount of airpower, automation, or other advanced technology is going to ensure victory, as the US found out painfully in Iraq. “There’s been lots written about avoiding using humans in conflict,” harrumped the head of the Association of the US Army, retired Gen. Gordon Sullivan, speaking at an AUSA event this afternoon. “You can’t do it.” And Sullivan is no Luddite: As Chief of Staff of the US Army, he pushed what was called the “Digital Division,” the forerunner of the battlefield wi-fi networks commanders use to coordinate ground operations today in Afghanistan.

Now the Army has gotten the Marine Corps and Special Operations

Command to start an “Office of Strategic Landpower” to work on the “human domain” of warfare as an intellectual counterweight to the Air Force and Navy focus on high-tech systems for AirSea Battle. “This isn’t an anti-technology pitch at all,” said Gen. Robert Cone, head of the Army’s powerful Training and Doctrine Command (TRADOC), speaking after Gen. Sullivan. From the ground-combat point of view, he said when I asked him about the Navy UCAS, “one of the best applications we’ve seen in unmanned aerial vehicles is the smallest ones,” where young Army captains send modest drones to check out what Taliban might be lurking over the next hill.

Honeywell.to.support.US.Army’s.heavy.tactical.wheeled.vehicles.program HoneywellTechnology Solutions (HTSI) has been awarded a contract to supply mission-capable heavy tactical vehicles to the US Army as part of a military vehicle program.

Representing the continuation of the company’s ongoing support to the program, the $72.4m contract covers provision of vehicles, along with required training to the army personnel for safe operation and maintenance of heavy tactical vehicles fleet over the next three years.

Under the contract, the company’s certified mechanics will repair, overhaul and deliver fully mission-capable vehicles for worldwide use by the US Army, Army Reserve and National Guard soldiers.

The instructor staff will also provide real time training to on-theground units prior to delivery, to ensure sufficient knowledge is provided to personnel on how to troubleshoot, order parts and repair equipment.

The comprehensive training will also enable operators to know all characteristics, capabilities and functions of the vehicles, before their actual deployment in combat operations.

Honeywell Technology Solutions president Carey Smith said: “Our teams have fielded and trained thousands of soldiers all over the world, and they understand the importance of ensuring that our soldiers are equipped to operate and maintain these trucks in any situation and in any region.”

Integral to the army’s global logistical footprint, the 10t heavy tactical vehicles are primarily operated for personnel, supplies and equipment transport missions.

Trucks that include the heavy expanded mobility tactical truck (HEMTT), heavy equipment transporter, and the palletized load system have regularly been upgraded with latest technology and capabilities, while some others have received full armor packages.

A2Z METALWORKER

• 45 •

May/June r2013

Lockheed. Martin. looks. overseas. to. recoup. sequester.losses Defense giant Lockheed Martin is looking outside the United States for new business as it scrambles to make up millions of dollars in lost sales from sequestration.

The American weapons maker wants to bolster its international sales portfolio up to 20 percent over the next fiscal year, Lockheed Martin President and CEO Marillyn Hewson said last month.

The move is part of Lockheed’s strategy to mitigate damage to its bottom line from the budget cuts under sequestration and from the overall reduction in military spending since the post-9/11 boom.

The sequester cuts $41 billion from the Pentagon in 2013, with another $500 billion in cuts coming over the next decade. Senior military leaders have said those cuts, if left in place, would require the Pentagon to change its strategy and dramatically scale back procurement.

The fiscal strain being placed on U.S. defense firms like Lockheed “isn’t anything new to us,” Hewson said, adding that the defense industry has been very vocal on the impact of sequestration for more than year.

Howard Precision Machined Products (JW Howard Inc.)

Howard Precision Machine (JWHoward Inc.) 776 West Honda Park Drive,Parts Bluffdale, Utah 84065 776 West Honda park Drive, Bluffdale, Utah 84065 www.HowardPMP.com www.HowardPMP.com • info@howardpmp.com info@howardpmp.com

801-619-9850

That said, “the alternative cannot be to [just] stand still,” Hewson said.

Lockheed will try to make up for lost U.S. business by focusing on exports of missile defense systems and unmanned aircraft, as well as foreign sales of the F-35 Joint Strike Fighter.

Nine nations, including the United States, have already agreed to purchase the F-35 from Lockheed.

“Any owner in today’s climate needs the strength and support of a strong business organization.” Ron Overton, Overton Industries

Your Membership Includes:

 Market Conditions Reports And Purchasing Fairs  Benchmarking Reports  Seminars With Cutting Edge Concepts  Advocacy in Washington, D.C.  Networking Events  Next Generation Workforce Development “Best Little Trade Association in the U.S.!” INC. Magazine

“Membership Doesn’t Cost, It Pays”

Most recently, Israel and Japan have confirmed F-35 buys while Singapore remains a “security cooperation participant” on the program, according to company officials.

Other, older aircraft and weapons in the U.S. military’s arsenal, such as the Navy’s MH-60 combat helicopter and the Air Force’s F-16 fighter jet, are ripe for overseas sales, according to Hewson.

“We are delivering,” she added, regarding progress on the international side of the F-35 program.

Defense observers say defense sectors in Asia, Brazil and the Middle East are among the emerging buyers on the international market.

MA NU FAC TU R ING COLOR A DO ’S F UTURE

Find Out More At An Upcoming Event!

720-248-8777 • maureen@rmtma.org • www.rmtma.org Option 01

MA NUF A CT URI NG AM ER IC A’S FU TU R E

www.ntma.org

A2Z METALWORKER

•

www.gonrl.org www.themfgmeeting.com

46 •May/June 2013

But countries like China and Iran are also looking to gain a larger foothold in the global weapons trade, raising concerns not only for the American defense sector but for U.S. national security as well.

Despite the anticipated losses in weapon sales, stock in Lockheed Martin and other American defense companies has soared since the first tranche of sequestration went into effect March 1.

Lockheed Martin stock has surged 8.3 percent, while competitor Boeing has jumped 9.6 percent. Shares in Northrop Grumman have climbed 6.1 percent, while Raytheon is up 6 percent.

Lockheed has stopgaps in place to cut costs and increase efficiencies to prepare for whatever the future might bring, Hewson said.

TOP QUALITY CUSTOMER REVIEWS FOR OVER 3,500 BAND SAWS

JGSDF.to.receive.ScanEagle.UAS.from.Insitu.

Pacific Mitsubishi Heavy Industries (MHI) has taken delivery of the ScanEagle small unmanned aircraft system (UAS) from Insitu Pacific for use by the Japanese Ground Self-Defence Forces (JGSDF).

Ordered under a contract awarded in July 2012, the UAS will now undergo comprehensive evaluations to prepare for entry into operational service with JGSDF over the next year.

The drone is scheduled to be used by JGSDF for damage assessment and provision of vital real-time information regarding natural and man-made disasters, in addition to intelligence, surveillance and reconnaissance (ISR) missions.

BandSawReviews.com is all about great reviews that are 100% customer-generated. This way, you always know what bandsaw is right for you and your business!

• Search for a bandsaw • Read the reviews • Write your own review

WWW.BANDSAWREVIEWS.COM Watkins Tool And Supply, LLC 303.371.2298 boydw@watkinstooling.com 3851 Revere Street Denver, CO 80239

Commenting on the delivery, Insitu Pacific business development director Dale McDowall said: “The benefits ScanEagle brings to Japan are substantial and this well-proven UAS could help save many lives in the future by getting information into the right hands quickly.”

“The benefits ScanEagle brings to Japan are substantial and this wellproven UAS could help save many lives in the future by getting information into the right hands quickly.”

QUALITY TOOLING SINCE 1976

Specializing In:

Based on the Insitu SeaScan UAV, ScanEagle is a small, low-cost, long-endurance UAS designed to provide real-time direct situational awareness and force protection information to both warfighters and commanders in the battlefield.

Engineering & Design Tool & Die Plastic Injection Molds Die-Cast Dies

Equipped with four air vehicles, a ground control station, remote video terminal, and a launch and recovery system, the 4ft-long fully autonomous drone can operate either individually or in groups over designated zones.

Launched by a pneumatic wedge catapult and retrieved by the Skyhook system, ScanEagle is capable of providing more than 15 consecutive hours of on-station coverage even in adverse weather conditions, including high winds and heavy rains.

The UAS is currently operated by the armed forces of Australia, Canada, Malaysia, Colombia, Poland, Singapore, Netherlands and the US.

MANUFACTURERS REP WANTED We Are Growing And Looking For A Manufacturers Representative To Sell Our Services. Contact Boyd Williford at 303.371.2298 or boydw@watkinstooling.com A2Z METALWORKER

•

88 • May/June 2012

• 47 •

May/June r2013

Calibrations,

A2Z METALWORKER

oe D d g d s d D, r, l Dd

e o t, w m e s p y

c e s n e c.

d d 0.

n g A t-

Foreign. workers. for. U.S.. jobs. a. rarity. at.

Boeing.

2936 South Zuni Street • Englewood, Colorado 80110 303-761-3000 • sales@rmsawblades.com Order Custom Welded Band Saw Blades in Denver • Over 30 years experience • State of the art, Ideal Computerized Welder • Offering a wide range of blade stock from many different manufacturers • Complete line of products for production cutting • Expedited orders are no extra charge.

Saws Band Saw Blades Files Magnets Power Tool Accessories Hole Saws Port-A-Bands Saw Blades Metal Cutting Fluids

Our goal is to ship out all of our orders “same day”.

We are proud to offer the best “on time delivery” at the best price anywhere.

Boeing is an old manufacturer with a high-tech edge, with tens of thousands of aerospace engineers, software developers, database administrators and network architects among its employees.

Yet unlike such firms as Microsoft and Amazon, Boeing rarely hires foreign workers.

Out of 86,000 employees in Washington state -- twice as many as Microsoft -- Boeing hired just eight new foreigners with H-1B visas in fiscal 2012. By contrast, Microsoft added 1,497 new visa workers during that time.

Why the discrepancy? For one thing, Boeing already has offshored a significant share of its engineering work to suppliers and design centers in Japan, Russia and elsewhere. For example,Saws Boeing did only half the engineering work itself on the 787-8, its first DreamBand Saw Blades liner model.

Files Magnets

Boeing also is heavily unionized, with a vocalPower labor Tool forceAccessories intent on Hole Saws job preservation.

Port-A-Bands Saw Blades Concerns about transferring aerospace technology of the Fluids counMetalout Cutting

try may be another factor.

Among defense contractors, Boeing’s practice isn’t unusual.

Lockheed Martin and Northrop Grumman, for instance, have hired a total of only 21 H-1B visa workers in the past five years combined. like 1 (lk) v. liked, lik·ing, likes v.tr.

1. To find pleasant or attractive; enjoy.

Like Is A Very Strong Word! facebook.com/a2zmetalworker

Go Ahead - Like Us Online!

Vol. 1, No. 4 Aug/Sept 2011

Vol. 4, No. 4 July/Aug 2011

Northern California, Oregon and Washington Edition

Colorado, Utah and Idaho Edition

CM Manufacturing, a Montana-based Job Shop, Expands Its Capabilities with The Mazak Integrex®

Heating up World Class Manufacturing with Perfect Parts!

www.azmetalworker.com

www.azmetalworker.com

 www.azmetalworker.com  facebook.com/a2zmetalworker A2Z METALWORKER A2Z METALWORKER •

52•May/June • July/Aug 2012 48 2013

•

The licensed technologies offer novel approaches for reading the

Stan Sorscher, labor representative for the engineering and technical workers’ union at Boeing, believes Boeing has opted for homegrown talent out of both necessity and choice.

Developing new airplanes is time-consuming and expensive, and most of Boeing’s white-collar workers are in their 40s and 50s with years of institutional know-how, said Sorscher, labor representative for the Society of Professional Engineering Employees in Aerospace (SPEEA).

Sorscher also said Boeing trains more and hires better. He believes Boeing is more likely than Microsoft and other companies to look for solid technical, problem-solving and communication skills instead of weeding out recruits with myriad technical requirements.

In addition, Boeing offers extensive in-house training as well as subsidized college tuition.

Indeed, Sorscher said he’s less worried about Boeing’s use of visas than about the influx of foreign workers distorting the job market for those already here, driving up competition and driving down wages.

“The labor market is working fine for Boeing,” he said.

Buyer’s Guide & Card Gallery Equipment and Services

Troy R. Kattenhorn, CMTSE Sales Manager 6855 West 116th Ave 0 Broomfield, CO 80020 303-466-3777 o Pax 303-466-19790 Cell: 303-437-6357 Email: troy@foothillsmachinery.com 0 www.foothillsmachinery.com

Tornos US 840 Parkview Boulevard Lombard, IL 60148 Phone 630 812 2040 Fax 630 812 2039

ACCESSORIES AIT______________ 800-321-3195 Blackhawk_Industrial_ ___ 303-744-1205 Bytebox____________ 888-Bytebox Desert_EDM_Sales_____ 480-816-6300 Abrasive Products Blackhawk_Industrial_ ___ 303-744-1205 Shop_Tools,_Inc._ ______ 303-375-9190

Ballscrews Fadal_CNC__________ 208-855-9426 Fadal Bandsaw Blades Roentgen_USA________ 847-787-0135 Roentgen Barfeeder Accessories Trusty-Cook_ ________ 877-240-2462 Trusty-Cook Boring Bars AIT______________ 800-321-3195 Marshall_Tool_&_Supply___ 602-269-6295 Micro_100_ _________ 208-888-7310 Seco_Tools_Inc.________ 248-528-5960 Chucks Marshall_Tool_&_Supply___ 602-269-6295 Seco_Tools_Inc.________ 248-528-5960 Cleanroom Bytebox Bytebox____________ 888-Bytebox Shop Shop_Tools,_Inc._ ______ 303-375-9190 CNC Lathe Accessories Trusty-Cook Trusty-Cook_ ________ 877-240-2462 CNC Spindle Liners Trusty-Cook Trusty-Cook_ ________ 877-240-2462

ROBERT SERRANO Regional Sales Manager West California Office Phone 951 695 0342 951 695 0346 Fax Mobile 951 240 0818 E-Mail serrano.r@tornos.com

Coolant Systems AIT______________ 800-321-3195 Blackhawk_Industrial___ 303-744-1205 Blaser____________ 801-722-4095 DCM_Tech___________ 800-533-5339 BHangsterfer’s_ ______ 316-640-2462 Hangsterfer’s_ _______ 760-580-1357 Marshall_Tool_&_Supply___ 602-269-6295 Qualichem,_Inc._ ______ 480-320-0308 Star_Metal_Fluids_ _____ 800-367-9966 Cutting Fluids & Oils AIT______________ 800-321-3195 Blackhawk_Industrial___ 303-744-1205 Blaser____________ 801-722-4095 Castrol____________ 800-894-7773

Christensen_Oil_ ______ 800-654-0438 Hangsterfer’s_ _______ 316-640-2462 Hangsterfer’s_ _______ 760-580-1357 Marshall_Tool_&_Supply___ 602-269-6295 Qualichem,_Inc._ ______ 480-320-0308 Star_Metal_Fluids_ _____ 800-367-9966 Cutting Tools AIT______________ 800-321-3195

A2Z METALWORKER

• 49 •

May/June 2013 r2013

Protective Computer Enclosures for the Industrial Environment

www.bytebox.com sales@bytebox.com 888-bytebox

Micro_100_ _________ 208-888-7310 Micro Sandvik_ Sandvik __________ 801-362-3618 Electronics Fadal_CNC__________ 208-855-9426 Fadal Fasteners Self_Clinch_Direct_ ____ 801-746-2689 Self Filtration Equipment Desert_EDM_Sales_____ 480-816-6300 Fixtures/Fixturing 5th_Axis_Fixtures_______ 858-505-0432 Gaging Blackhawk_Industrial_ ___ 303-744-1205 Shop_Tools,_Inc._ ______ 303-375-9190 Hole Making Products Schenk_Intertech_______480-323-6755 Knives: Replacement Superior_Grinding______ 801-487-9700 Laser Accessories Castrol____________ 800-894-7773 Christensen_Oil_ ______ 800-654-0438 Laser Marking Equipment Total_Quality_Systems_Inc.__ 480-377-6422 Liquid Penetrant Team_Industrial_Services___ 801-397-2202

SECO TOOLS INC.,

DAVID LADZICK MANAGER DAVID LADZICK NORTHWEST REGION MANAGER

NORTHWEST REGION 8215 SW TUALATIN-SHERWOOD ROAD, SUITE 200 TUALATIN, OR 97062 503-267-4805 8215CELL: SW TUALATIN-SHERWOOD ROAD, SUITE 200 TUALATIN, OR 97062 OFFICE: 248-528-5990 FAX: 503-404-2440 CELL: 503-267-4805 E-MAIL: dladzick@secotools.com OFFICE: 248-528-5990 FAX: 503-404-2440 www.secotools.com E-MAIL: dladzick@secotools.com

SECO TOOLS INC.,

Almar Tools ________ 503-255-2763 Almar_Tools_ Blackhawk_Industrial_ ___ 303-744-1205 Horizon_Carbide_Tool___480-968-0957 Marshall_Tool_&_Supply___ 602-269-6295 Micro_100_ _________ 208-888-7310 Sandvik_ __________ 801-362-3618 Seco_Tools_Inc.________ 248-528-5960 Shop_Tools,_Inc._ ______ 303-375-9190 Dielectric Fluid Hangsterfer’s_ _______ 316-640-2462 Hangsterfer’s_ _______ 760-580-1357 Drills Sandvik_ __________ 801-362-3618 Seco_Tools_Inc.________ 248-528-5960 Dust Collectors, Filtration Equip.

Blaser____________ 801-722-4095 Bytebox____________ 888-Bytebox Castrol__ __________ 800-894-7773 A2Z METALWORKER

•

50 •

May/June 2013

Christensen_Oil_ ______ 800-654-0438 DCM_Tech___________ 800-533-5339 Star_Metal_Fluids_ _____ 800-367-9966 EDM Materials & Supplies Blaser____________ 801-722-4095 Castrol____________ 800-894-7773 Christensen_Oil_ ______ 800-654-0438 Desert_EDM_Sales_____ 480-816-6300 EDM_Network_ _______ 480-836-1782 EDM_Perform._Access.____ 800-336-2946 Global_EDM__Supply_____ 480-836-8330 Star_Metal_Fluids_ _____ 800-367-9966 EDM: Dielectric Systems /Filtration Desert_EDM_Sales_____ 480-816-6300 End Mills Almar_Tools_ ________ 503-255-2763 Marshall_Tool_&_Supply___ 602-269-6295

www.secotools.com

Team_Industrial_Services___ 602-269-7868 Lubricants / Systems Blaser____________ 801-722-4095 Castrol____________ 800-894-7773 Christensen_Oil_ ______ 800-654-0438 Hangsterfer’s_ _______ 316-640-2462 Hangsterfer’s_ _______ 760-580-1357 Marshall_Tool_&_Supply___ 602-269-6295 Qualichem,_Inc._ ______ 480-320-0308 Star_Metal_Fluids_ _____ 800-367-9966 Machine Tool Accessories Schenk_Intertech_______480-323-6755 Machine Tool Cool. Filtration Blaser____________ 801-722-4095 Castrol____________ 800-894-7773 Christensen_Oil_ ______ 800-654-0438 Hangsterfer’s_ _______ 316-640-2462

www.kdcapital.com

65 South Cottonwood Street (300 W) 6577 Salt Lake City, Utah 84107 Sa

Gage-Lab Products G

922-1674

Dimensional Gaging Specialists

Tim Zimmerman

tz@gagelabproducts.com

phone (801)716-2972 fax

(8 (801)716-2975

c cell

(8 (801)918-8798

www.gagelabproducts.com

Hangsterfer’s _______ 760-580-1357 Hangsterfer’s_ Marshall_Tool_&_Supply___ 602-269-6295 Star_Metal_Fluids_ _____ 800-367-9966 Milling and Turning Products Schenk_Intertech_______480-323-6755 Motors Fadal_CNC__________ 208-855-9426 Parts Washing Equipment Blaser____________ 801-722-4095 Star_Metal_Fluids_ _____ 800-367-9966 PrecisionTool Holding Products Schenk_Intertech_______480-323-6755 Rapid Optical Part Inspection Schenk_Intertech_______ 480-323-6755_ Revolvers Fadal_CNC__________ 208-855-9426 Solvents /Degreasing Agents Blaser____________ 801-722-4095 A2Z METALWORKER

•

51 •

Castrol____________ 800-894-7773 Ca Hangsterfer’s_ _______ 316-640-2462 Hangsterfer’s Hangsterfer’s_ _______ 760-580-1357 Hangsterfer’s Star Star_Metal_Fluids_ _____ 800-367-9966 Spindles Fadal_CNC__________ Fadal 208-855-9426 GMN_USA_ _________ 800-686-1679 GMN Setco_Spindles_&_Slides_ __ 866-362-0699 Thread Mills Micro_100_ _________ 208-888-7310 Sandvik_ __________ 801-362-3618 Tooling Systems AIT______________ 800-321-3195 Almar_Tools_ ________ 503-255-2763 Blackhawk_Industrial_ ___ 303-744-1205 Micro_100_ _________ 208-888-7310 Sandvik_ __________ 801-362-3618 Seco_Tools_Inc.________ 248-528-5960 Vices and Vice Jaws 5th_Axis_Fixtures_______ 858-505-0432 Desert_EDM_Sales_ _____ 480-816-6300 Waycovers Fadal_CNC__________ 208-855-9426

May/June 2013

TECHNOLOGY THAT WORKS

Work Holding 5th_Axis_Fixtures_______ 858-505-0432 AIT______________ 800-321-3195 Schenk_Intertech_______480-323-6755 CALIBRATION SERVICES Advanced_Coord._Tech_____ 303-469-6161 Klontech_Industrial_Sales_ _ 480-948-1871 Total_Qual._Syst._______ 480-377-6422 GRAPHITE FOR EDM Aerospace Toyo_Tanso_USA_ ______ 630-248-3885 Fine Detail Electrodes Toyo_Tanso_USA_ ______ 630-248-3885 Forging Dies Toyo_Tanso_USA_ ______ 630-248-3885 Carbide Burning Toyo_Tanso_USA_ ______ 630-248-3885

Threaded Electrodes Toyo_Tanso_USA_ ______ 630-248-3885 GRINDING Grinding Machines DCM_Tech__________ 800-533-5339 Blackhawk_Industrial___ 303-744-1205 Moncktons_Mach_Tools_ _ 303-571-4933 Triad_Machine_______ 303-424-0268 Aircraft brake rotor DCM_Tech__________ 800-533-5339 Grinders, Rotary Silicon & Quartz DCM_Tech__________ 800-533-5339 Manual Lathes & Mills AME,_Inc._ ________ 303-922-9266 Pedestals for Grinders Midaco___________847-593-8420 A2Z METALWORKER

• 51 •

May/June 2013

11042 N. 24th Ave. Suite 101 Phoenix, AZ 85029

5thAXIS FIXTURES

Innovative solutions for all 3, 4, and 5 axis machines.

Mathew Evans Director of Sales and Marketing

7140 Engineer Rd. San Diego, CA 92111 www.5axisfixtures.com sales@5axisfixtures.com

Automatic Barfeeds of all Types

(858)-505-0432

An ISO 9001 Company

VP/General Manager

Jeff Klimowicz Senior Sales Engineer Southwest Region: AZ, UT, NV, CO, ID All Products Proudly Made in the USA

Sawing Machines AIT______________ 800-321-3195 Blackhawk_Industrial___ 303-744-1205 Jorgensen_Machine_Tools_ 800-952-0151 Moncktons_Mach_Tools_ _ 303-571-4933 Rocky_Mountain_Saw_Blades__303-761-3000_ Saw Replacement Parts Rocky_Mountain_Saw_Blades__303-761-3000 Tool Grinders Punch & Die DCM_Tech__________ 800-533-5339 _INSPECTION EQUIP Advanced_Coord._Tech_____ 303-469-6161 Gage_Lab_Products______ 801-716-2972 Klontech_Indust._Sales____ 480-948-1871 OGP_ _ ___________ 480-889-9056 Total_Qual._Syst._______ 480-377-6422 CMM Probes Datum_Inspection_ _____ 602-997-1340 Gage_Lab_Products______ 801-716-2972 Klontech_Industrial_Sales_ _ 480-948-1871 OGP_ ___________ 480-889-9056 Total_Quality_Systems_Inc.__ 480-377-6422 Coordinate Measuring Mach.

Advanced_Coordinate_Tech__ 623-780-4137 Datum_Inspection_ _____ 602-997-1340 Klontech_Industrial_Sales_ _ 480-948-1871 A2Z METALWORKER

•

52 •

May/June 2013

Moncktons_Mach_Tools_ _ 303-571-4933 OGP_ ___________ 480-889-9056 Total_Quality_Systems_Inc.__ 480-377-6422 Gauging Equipment Advanced_Coord._Tech__ __ 303-469-6161 Gage_Lab_Products______ 801-716-2972 Klontech_Industrial_Sales_ 480-948-1871 OGP_ ___________ 480-889-9056 Total_Quality_Systems_Inc.__ 480-377-6422 Low Temp Instrumentation High_Precision_Devices_ _ 303-447-2558 Metrology Instruments Advanced_Coord._Tech__ __ 303-469-6161 Datum_Inspection_____ 602-997-1340 Gage_Lab_Products______ 801-716-2972 Klontech_Industrial_Sales_ 480-948-1871 OGP______ __________ 480-889-9056 Total_Quality_Systems_Inc.__ 480-377-6422 Optical Comparators Advanced_Coord._Tech__ __ 303-469-6161 Datum_Inspection_____ 602-997-1340 Gage_Lab_Products______ 801-716-2972 Klontech_Industrial_Sales_ 480-948-1871 OGP_ ___________ 480-889-9056 Total_Quality_Systems_Inc.__ 480-377-6422

Mobile: 480‐320‐0308 jklimowicz@qualichem.com www.qualichem.com

Particle Inspection Mach DCM_Tech__________ 800-533-5339 Video Measuring Systems Advanced_Coordinate_Tech_ ___ 623-780-4137 Gage_Lab_Products______ 801-716-2972 Klontech_Industrial_Sales_ 480-948-1871 Total_Quality_Systems_Inc.__ 480-377-6422 HARDWARE Horizon_Carbide_Tool___480-968-0957 Metal_Supermarkets_ __ 801-972-2441 Utah_Metal_Works,_Inc.__ 801-364-5679 METALS & MATERIALS AZ_Tool_Steel_LLC_ _____ 480-784-1600 Coastal_Metals_ ______ 800-811-7466 Erickson_Metals______877-543-6061 Metal_Supermarkets_ __ 801-972-2441 Ryerson__________303-227-6310 Samuel,_Son_&_Co._ __ 303-422-8282 TCI_Precision_Metals_ __ 800-234-5613 United_Performance_Metals_888-282-3292 Western_States_Metals_ _801-978-0562 Alloys: Corrosion Resistant Haynes_Intl__________ 713-937-7597 United_Performance_Metals__888-282-3292

Alloys: High Temperature Haynes_Intl_ ________713-937-7597 United_Performance_Metals__888-282-3292 Alloys: Nichel & Cobalt Haynes_Intl_ ________713-937-7597 United_Performance_Metals__888-282-3292 Aluminum TCI_Precision_Metals_ __ 800-234-5613 Brass Coastal_Metals_ ______ 800-811-7466 Ryerson___________303-227-6310 United_Performance_Metals_ 888-282-3292 Bronze Coastal_Metals_ ______ 800-811-7466 Carbon Coastal_Metals_ ______ 800-811-7466 Ryerson___________303-227-6310 Metals: Bar & Plate AZ_Tool_Steel_LLC_ _____480-784-1600 Coastal_Metals_ ______ 800-811-7466 Ryerson___________303-227-6310 Mold Steel AZ_Tool_Steel_LLC_ _____480-784-1600 Nickel Alloys AZ_Tool_Steel_LLC_ _____480-784-1600 A2Z METALWORKER

• 52 •

May/June 2013

Marzee_Inc.________602-269-5801 Marzee Inc. 602-269-5801 Ryerson__________303-227-6310 United_Performance_Metals__888-282-3292 _Plate-Precision Saw Cut Erickson_Metals______877-543-6061 Pre-Honed Tube Western_States_Metals_ _801-978-0562 Rubber Marzee_Inc.________602-269-5801 Stainless Steel AZ_Tool_Steel_LLC_ ____ 480-784-1600 Coastal_Metals_ ______ 800-811-7466 Metal_Supermarkets_ __ 801-972-2441 Ryerson__________303-227-6310 Samuel,_Son_&_CO.____ 303-422-8282 TCI_Precision_Metals_ __ 800-234-5613 United_Performance_Metals__888-282-3292 Steel AZ_Tool_Steel_LLC________480-784-1600 Coastal_Metals_ ______ 800-811-7466 Marzee_ __________ 602-269-5801 Metal_Supermarkets____801-972-2441 Ryerson___________303-227-6310 Samuel,_Son_&_CO.____ 303-422-8282 TCI_Precision_Metals_ __ 800-234-5613 Titanium Tube & Pipe Haynes_Intl_ ________713-937-7597 Supra_Alloys,Inc_______805-388-2138 Titanium, Rod, Bar & Wire Supra_Alloys,Inc_______805-388-2138 Titanium, Sheet & Plate Supra_Alloys,Inc_______805-388-2138 Washers LeeSpring_________480-539-5704 METAL DISTRIBUTORS Erickson_Metals______ 877-543-6061 Coastal_Metals_ ______ 800-811-7466 Haynes_Intl__________713-937-7597 Metal_Supermarkets_ __ 801-972-2441 Ryerson___________303-227-6310 Samuel,_Son_&_CO.____ 303-422-8282 Supra_Alloys,Inc_______805-388-2138 United_Performance_Metals__888-282-3292 Western_States_Metals_ _ 801-978-0562 NEW MACHINERY CHIP CUTTING CNC Drilling/Tapping Methods_West_______ 602-437-2220 CNC Mills Action_Machine_ _____ 303-532-2900

AME,_Inc._ AME, Inc. ________ 303-922-9266 Blackhawk_Industrial___ 303-744-1205 Foothills_Machinery____ 303-466-3777 Hartwig_Inc.________ 303-373-9450 J.M._Grisley_ _______ 801-486-7519 King_Machine_______ 208-345-9600 Methods_West_______ 602-437-2220 Moncktons_Mach_Tools_ _ 303-571-4933 Smith_Machinery_Co_ ___801-263-6403 Todd_Machinery_______801-294-6390 Tornos_USA_ ________951-695-0342 Triad_Machine________303-424-0268 CNC Lathes Action_Machine_ _____ 303-532-2900 AME,_Inc._ ________ 303-922-9266 Blackhawk_Industrial____303-744-1205 Foothills_Machinery____ 303-466-3777 J.M._Grisley_ _____ ______801-486-7519 Hartwig_Inc._________303-373-9450 King_Machine_______ 208-345-9600 Methods_West_______ 602-437-2220 Moncktons_Mach_Tools_ __303-571-4933 Muratec__________ 949-466-8255 Smith_Machinery_Co_ ___801-263-6403 Todd_Machinery_______801-294-6390 Triad_Machine________303-424-0268 CNC Swiss Turn Machines AME,_Inc._ ________ 303-922-9266 Methods_West_______ 602-437-2220 Moncktons_Mach_Tools_ _ 303-571-4933 Muratec_________ 949-466-8255 Tornos_USA_ ______ 951-695-0342 Triad_Machine_______ 303-424-0268 EDM Machines Action_Machine_ _____ 303-532-2900 AME,_Inc._ ________ 303-922-9266 Desert_EDM_Sales_____ 480-816-6300 EDM_Network_ ______ 480-836-1782 Methods_West_______ 602-437-2220 Moncktons_Mach_Tools_ _ 303-571-4933 Smith_Machinery_Co_ __ 801-263-6403 Todd_Machinery______ 801-294-6390 Triad_Machine_______ 303-424-0268 EDM Tooling Systems Desert_EDM_Sales_____ 480-816-6300 EDM_Network_ ______ 480-836-1782 EDM_Perform._Access.____ 800-336-2946 Global_EDM__Supply____ 480-836-8330 End Mills Helical_Solutions_ ____ 866-543-5422

NEW MACHINERY FABRICATION PrecisionFab_Inc._ ____303-779-9180 PrecisionFab Band Saws AIT______________ 800-321-3195 AIT Fabricating_Equip_Sales__ 303-466-7342 Fabricating King_Machine_______ 208-345-9600 King Marshall_Tool_&_Supply___ 602-269-6295 Bar Feeders Edge_Technologies______ 562-597-7824 Trusty-Cook_ ________ 877-240-2462 Cold Saws Fabricating_Equip_Sales___ 303-466-7342 CNC Punching Centers Blackhawk_Industrial___ 303-744-1205 PrecisionFab_Inc._ ____303-779-9180 S&S_Machinery_Sales___ 602-368-8542 Iron Workers AIT______________ 800-321-3195 Fabricating_Equip_Sales__ 303-466-7342 Jorgensen_Machine_Tools_ 800-952-0151 S&S_Machinery_Sales___ 602-368-8542 Laser Cutters Action_Machine_ _____ 303-532-2900 Blackhawk_Industrial___ 303-744-1205 Moncktons_Mach_Tools_ _ 303-571-4933 Muratec_________ 949-466-8255 PrecisionFab_Inc._ ____303-779-9180 S&S_Machinery_Sales___ 602-368-8542 Sidley_Diamond_Tool_ __ 800-544-9070 Triad_Machine_______ 303-424-0268 Pipe &Tube Benders/Notchers Fabricating_Equip_Sales__ 303-466-7342 S&S_Machinery_Sales___ 602-368-8542 Plasma/Gas CuttingSystems Muratec_________ 949-466-8255 Plate Rolls Fabricating_Equip_Sales__ 303-466-7342 Jorgensen_Machine_Tools_ 800-952-0151 Press Brakes Blackhawk_Industrial___ 303-744-1205 Fabricating_Equip_Sales__ 303-466-7342 Jorgensen_Machine_Tools_ 800-952-0151 King_Machine_______ 208-345-9600 PrecisionFab_Inc._ ____303-779-9180 S&S_Machinery_Sales___ 602-368-8542 Shearing Machines Action_Machine_ _____ 303-532-2900 Blackhawk_Industrial___ 303-744-1205_ Fabricating_Equip_Sales__ 303-466-7342 Jorgensen_Machine_Tools_ 800-952-0151 King_Machine_______ 208-345-9600 S&S_Machinery_Sales___ 602-368-8542 Turret Press Muratec_________ 949-466-8255 PrecisionFab_Inc._ ____303-779-9180

Welding Equipment Rocky_Mountain_Saw_Blades_ _303-761-3000 OTHER ACCESSORIES Tooling Systems Desert_EDM_Sales______ 480-816-6300 USA_EDM_Supply_ _____ 480-836-8330 PALLET SYSTEMS Automatic Pallet Systems Midaco___________ 847-593-8420 Automatic Door Opener Systems Midaco___________ 847-593-8420 Manual Rotary Pallet Systems Midaco___________ 847-593-8420 Robotic Part Loading Systems Midaco___________ 847-593-8420 PROG. SYSTEMS Factory Automation/Logistics Muratec_________ 949-466-8255 CAD/CAMSoftware, CAD AME,_Inc._ ________ 303-922-9266 Delcam_ __________ 877-35-2261 Feature_Cam_ ______ 602-502-9654 PROTOTYPE MACHINERY 3D_Parts_To_Go________801-380-7935 RECYCLING Recyclable Metals Iron_&_Metals,_Inc_____ 303-292-5555 Utah_Metal_Works,_Inc.___801-364-5679 Scrap Metal Recycling Iron_&_Metals,_Inc_____ 303-292-5555 Utah_Metal_Works,_Inc.___801-364-5679 ROBOTIC EQUIPMENT Integrated_Systems_Inc__ 928-649-9600 SERVICES AS9100 Certification ABS_Quality_Evaluations_ 702-371-7591 BMSC_ __________ 602-445-9400 MEP_ ___________ 801-863-7001 Sustaining_Edge_Solutions__ 888-572-9642 Calibration Services Advanced_Coord._Tech__ __ 303-469-6161 Klontech_Industrial_ ____480-948-1871 Western_States_Calibration___ 801-466-1700 Consultant, ISO ABS_Quality_Evaluations_ 702-371-7591 BMSC_ __________ 602-445-9400 MEP_ ___________ 801-863-7001 Sustaining_Edge_Solutions__ 888-572-9642

A2Z METALWORKER

• 53 •

May/June 2013

JEFFREY F. NAWROT

VP BUSINESS DEVELOPMENT 10530 E. 59th Street Indianapolis, IN 46236 ph317.823.6821 / 877.240.2462 cell317.946.1235 / home317.823.8615 fax317.823.6822 www.trusty-cook.com email-trustycook@sbcglobal.net

Manufacturers’ Rep ISO900/AS9100 Registration Schenk_Intertech_ ______480-323-6755 American_Global_Standards_ 617-838-4648 Great_Western_Registrar_ 623-580-1881 Process Improvement Inspection Services BMSC__ _____________ 602-445-9400 Advanced_Coord._Tech______303-469-6161 Sustaining_Edge_Solutions___ 888-572-9642 Datum_Inspection_ _____ 602-997-1340 Rapid Prototyping Team_Industrial_Services___ 801-397-2202 3D_Parts_To_Go_ _____ 801-380-7935 Western_States_Calibration_ 801-466-1700 Team_Industrial_Services___ 602-269-7868 Reverse Engineering Calibration: Repair & Certify Insurance Services Western_States_Calibration___ 801-466-1700 Sentry_Insurance_ ____ 303-619-4476 Advanced_Coord._Tech______303-469-6161 Diversified_Metal_Services____801-972-6093 Lean Consulting Calibration Services Advanced_Coord._Tech__ __ 303-469-6161 ABS_Quality_Evaluations_ 702-371-7591 Klontech_Measure_Sol_____480-626-8131 Machine Repair/Servicing Rigging Klontech_Industrial_ ____480-948-1871 Western_States_Calibration___ 801-466-1700 Jorgensen_Machine_Tools__800-952-0151 IRH_ _____________801-972-5581 MAG Particle Calibration Training Spindle Rebuilding Team_Industrial_Services_ __ 801-397-2202 GMN_USA_ _________ 800-686-1679 Western_States_Calibration___ 801-466-1700 Team_Industrial_Services___ 602-269-7868 Contract Inspection Setco-Pope_Spindles______866-362-0699 Advanced_Coord._Tech__ __ 303-469-6161 Process Improvement/ Audit Staffing Klontech_Measure_Sol___ 480-626-8131 ABS_Quality_Evaluations_ 702-371-7591 BMSC__ _____________ 602-445-9400 Resource_Mfg_________801-265-1999 Total_Quality_Systems_Inc.__ 480-377-6422 Sustaining_Edge_Solutions__ 888-572-9642 Statistical Process Control Contract Programming X-Ray Total_Quality_Systems_Inc.__ 480-377-6422 Total_Quality_Systems_Inc.__ 480-377-6422 Certified_Inspection_Service_ _602-267-0661 SHOP FLOOR AUTOMAEducation Semiray____________602-275-1917 TION College_Of_Western_Idaho__ 208-562-2346 Team_Industrial_Services___ 801-397-2202 Hardware: USB Ogden-Weber__Tech_College_ 801-395-3795 Team_Industrial_Services___ 602-269-7868 Bytebox____________ 888-Bytebox Engineering Services ISO9000 / AS9100 Cert. Shop_Floor_Automations____ 877-611-5825 Advanced_Coord._Tech__ __ 303-469-6161 American_Global_Standards_ 617-838-4648 Scheduling Financing BMSC__ _____________ 602-445-9400 IEC_ __ __________ 303-593-0403 Gladhill_Associates_______719-495-8045 Shop_Floor_Automations____ 877-611-5825 Serial Port Intech_Funding_ ______480-699-2512 Great_Western_Registrar____623-580-1881 First Article Inspection MEP_ _ ____________801-863-7001 Bytebox____________ 888-Bytebox Advanced_Coord._Tech______303-469-6161 Orion_Registrar__ _______303-645-4017 Shop_Floor_Automations____ 877-611-5825_ Software:CNC Networking Datum_Inspection_ _____ 602-997-1340 Sustaining_Edge_Solutions__ 888-572-9642 Bytebox____________ 888-Bytebox ISO Registrar Western_States_Calibration___ 801-466-1700 American_Global_Standards_ 617-838-4648 Shop_Floor_Automations____ 877-611-5825 Heavyhaul Great_Western_Registrar____623-580-1881 RS232 Cabling IRH_ __ ___________801-972-5581 Orion_Registrar__ _______303-645-4017 Shop_Floor_Automations____ 877-611-5825 Injection Molding Lean Manufacturing Transportation 3D_Parts_To_Go_ _____ 801-380-7935 MEP_ _ ____________ 801-863-7001 IRH_ _____________801-972-5581 ISO900/AS9100 Audits Sustaining_Edge_Solutions__ 888-572-9642 Virtual CNC American_Global_Standards_ 617-838-4648 Machine Tool Rebuilding Great_Western_Registrar_ 623-580-1881 EDM_Network_ ______ 480-836-1782 Shop_Floor_Automations____ 877-611-5825 A2Z METALWORKER

•

54 •May/June May/June2013 2013

TOOLING Arc Cutting Tools Helical_Solutions_______866-543-5422 TRAINING CAD/CAM Training College_Of_Western_Idaho__ 208-562-2346 Davis_Applied_Tech_College___801-593-2483 CNC/Conventional Machining College_Of_Western_Idaho__ 208-562-2346 Davis_Applied_Tech_College___801-593-2483 Machining Software College_Of_Western_Idaho__ 208-562-2346 Davis_Applied_Tech_College___801-593-2483 USED MACHINERY EDM_Network_ ________ 480-836-1782 Jorgensen_Machine_Tools___800-952-0151 King_Maching_______ 208-345-9600 K.D._Capital_Equipment____480-922-1674 Methods_West_________602-437-2220 PrecisionFab_Inc._ ____303-779-9180 S&S_Machinery_Sales_____602-368-8542 WATERJET CUTTING MACHINERY Action_Machine________303-532-2900 Fabricating_Equip_Sales___ 303-466-7342 Flow_International_______800-446-3569 Global_EDM__Supply_____480-836-8330 Jorgensen_Machine_Tools___800-952-0151 King_Machine_______ 208-345-9600 OMAX_Corp_________800-838-0343 Triad_Machine_______ 303-424-0268

Buyer’s Guide & Card Gallery Processes

2820 Brandt Ave Nampa, ID 83687

Ph: 208-442-1999

www.rpmmachineinc.com rpm@rpmmachineinc.com www.daytonrogers.com 800-677-8881

● Complex Stampings ● On Time Delivery ● Quality Assurance

● Difficult Assemblies ●Contract Mfg. ●Design Assistance

Mark Erickson ● General Manager merickson@daytonrogers.com 763-717-6303

ASSEMBLIES Bar-S_Machine_________ 928-636-2115 Dayton_Rogers_ _______ 763-717-6303 Prescott’s_Manufacturing___ 719-482-5826 Progway____________435-656-9585 RPM_CNC_Precision_Machine_ 208-442-1999 Steen_&_Sons_Machine_Shop_208-522-7341 Superior_Metal_Products___ 303-791-7550 Wasatch_Laser_Processing___801-972-3500 Welded Assemblies Weiser/Mile_High_Precision_ 303-280-2778 BAR CODING Western_Sintering______509-375-3096 BENDING JQ_Enterprises__________801-975-0777 Mandrel Bending BK_Machine_Inc.________801-253-1929 BRAZING Precision_Casting_Repair_ __ 801-972-2345

BROACHING Coating:Zinc & Mag.Phos.

Ponderosa_Ind_________303-298-1801 Coating_Technologies____623-581-2648 Precision_Mach’d_Products_ 970-482-7676 Collins_Metal_Finishing_ __ 602-275-3117 Specialty_Steel_Services___ 801-539-8252 Powder_Extreme_Coatings__ 801-450-2819 Coating: Powder Turning: Automatic Powder_Extreme_Coatings_ _ 801-450-2819 Matrix_Machine_______ 480-966-4451 COLD SPRAY COATING Accuwright_Industries____480-892-9595 Ceramic High-Tech COMPOSITES Powder_Extreme_Coatings__ 801-450-2819 S.A._Composites________ 970-776-3877 Coating: Liquid CUTTING Collins_Metal_Finishing_ __ 602-275-3117 Plastic Pilkington_Metal_Finishing_ 801-972-2146 ImageTek_ __________ 303-806-8111 Coating: Nickel/Teflon/ DESIGN/ CAD/CAM Chrome Bar-S_Machine_________ 928-636-2115 Coating_Technologies____623-581-2648 H&_S_Machine_________ 801-755-7627 Collins_Metal_Finishing_ __ 602-275-3117 DIE CASTING LA_Specialties________ 602-269-7612 Watkins_Tool_&_Supply_ __ 303-295-9603

TVT_Die_Casting_ ______ 800-280-2278 Die Casting: Aluminum/Zinc TVT_Die_Casting_ ______ 800-280-2278 DIES Able_Machining_&_Eng.__ 801-268-6766 EDM EDM: Drilling Small Hole BK_Machine_Inc.______801-253-1929 Critical_Cut__________ 480-785-1316 Micropulse_West_______ 480-966-2300 EDM: Ram-Type (Sinking) Innovative_Precision____ 801-334-6317 Maverick_Mold_&_Machine_ 970-535-4604 Micropulse_West_______ 480-966-2300 Prec._Mach’d_Products____ 970-482-7676 EDM: Wire Advanced_Machining_Inc.__303-485-5256 Critical_Cut__________ 480-785-1316 Foremaster_Tool_______801-737--0265 • 55 • May/June 2013 55 •July/Aug 2011

A2Z METALWORKER A2Z METALWORKER

•

Kelly Martinez Machine Shop Lifetime Products, Inc. P.O. Box 160010, Freeport Center, Bldg D-11 Clearfield, UT 84016 T: 801.726.5312 F: 801.728.1979 email: kmartinez@lifetime.com

Innovative_Precision______801-334-6317 Micropulse_West_______ 480-966-2300 Paramount_Machine_ ___ 801-282-2755 H&R_Precision_________801-975-7400 Jet_Processing________ 623-869-6749 LA_Specialties________ 602-269-7612 Thompson_Machine_____ 505-823-1453 ELECTROPOLISHING Collins_Metal_Finishing_ __ 602-275-3117 ENGINEERING/DESIGN AzMark_ __________480-926-8969 Hexatron_ _________ 801-363-8010 FABRICATION Aero_Tech_ _______ 801-292-0493 Arrow_Sheet_Metal_Prod_ 303-427-6419 Cygnet____________ 818-240-7574 D&B_Precision_Products___ 719-473-3699 A2Z METALWORKER

•

56 •

May/June 2013

Dayton_Rogers_ Dayton Rogers ______ 763-717-6303 EMJD_Corporation_____303-761-5236 Focused_on_Machining_ __ 303-922-3076 GBC_ ____________303-988-6450 Hexatron_ _________ 801-363-8010 Howell_Precision_______ 623-582-4776 Kustom_Koncepts_ _____ 307-472-0818 MicroMetals_________ 719-593-8367 Mountain_View_Machine__ _435-755-0500 Star_Precision_ _______303-926-0559 Custom Auto/Truck/Bike H&_S_Machine_______ 801-755-7627 Fabrication: Filament Winding S.A._Composites_______ 970-776-3877 Fabrication: Composites S.A._Composites_______ 970-776-3877

Kustom_Koncepts_ _____ 307-472-0818_ Star_Precision_ _______303-926-0559 Fabrication: Medium & Large Arrow_Sheet_Metal_ ___303-427-6419 EMJD_Corp_ _______303-761-5236 Falcon_Sheet_Metal___ 801-298-5064 GBC_ ____________303-988-6450 Group_Mfg_Serv_______480-966-3952 Howell_Precision_______ 623-582-4776 MicroMetals_________ 719-593-8367 Kustom_Koncepts_ _____ 307-472-0818 Weiser/Mile_High_Precision_ 303-280-2778 Fabrication: Non-Metal Wesco_Laser_Mchg._ ____ 303-765-5916 Fabrication: Plastic Fabrication: Enclosures Falcon_Sheet_Metal___ 801-298-5064 ImageTek_ __________303-806-8111

Fabrication: SheetMetal Arrow_Sheet_Metal_Prod___ 303-427-6419 AzMark_ __________480-926-8969 Cygnet____________ 818-240-7574 D&B_Precision_Products___ 719-473-3699 Denver_Machine_Shop____303-295-6000 EMJD_Corporation_____303-761-5236 Falcon_Sheet_Metal___ 801-298-5064 GBC_ ____________303-988-6450 Group_Mfg_Serv_______480-966-3952 Hexatron_ _________ 801-363-8010 Howell_Precision_______ 623-582-4776 Kustom_Koncepts_ _____ 307-472-0818 Laser_Concepts_Inc._ ____ 801-280-7723 MicroMetals_________ 719-593-8367 Precision_Tech________801-285-7288 Richards_Fab_ _____ 801-409-0392 Star_Precision_ _______303-926-0559

Image Tek Business Card 2011 (Neil Daley: President) 3.5” Wide by 2” High

Weiser/Mile_High_Precision_303-280-2778 TVT_Die_Casting_ ______800-280-2278 Wrico_ ___________480-892-7800 De-Rusting Fabrication: Steel Glass Bead Clean EMJD_Corp_ ______ 303-761-5236 Coating_Technologies_ ___623-581-2648 Falcon_Sheet_Metal___ 801-298-5064 Precision Electronic Sheet Metal Gold_Tech_Industries_____ 480-968-1930 D&B_Precision_Products___ 719-473-3699 Hand Deburring: Precision H&R_Precision________ 801-975-7400 FINISHING Liquid Painting Arizona_Finishing______602-438-4443 Industrialex_ ______ 303-456-6847 Coating_Technologies_ ___623-581-2648 Passivation Collins_Metal_Finishing_ __ 602-275-3117 Certified_Inspection_Service___602-267-0661 Foresight_Finishing_ ____ 480-921-0000 Coating_Technologies_ ___623-581-2648 Gold_Tech_Industries_____ 480-968-1930 Phoenix_Heat_Treating_ __ 602-258-7751 Gold_Tech_Industries_____ 480-968-1930 Precision_Mach’d_Prod____ 970-482-7676 Jet_Processing_____ 623-869-6749x117 Powder Coating Star_Precision_ _______303-926-0559 Superior_Grinding______801-487-9700 Arizona_Finishing______602-438-4443

Wet Paint/CARC MicroMetals_________ 719-593-8367

FOUNDRY May_Foundry_&_Machine_ 801-531-8931 State_Brass_Foundry_&_Mach._ 801-467-9461 GALVANIZING Jordan_River_Galvanizing__801-282-9375 Galvanizing: Hot Dip Jordan_River_Galvanizing__801-282-9375 Galvanizing: Zinc Jordan_River_Galvanizing__801-282-9375 GAS NITRIDING Blanchard_Metals_Proc._ __801-972-5590 GEAR CUTTING Ponderosa_Ind________ 303-298-1801 Specialty_Steel_Svcs____ 801-539-8252 Gear Hobbing Ponderosa_Ind________ 303-298-1801

Aluminum (Medium & Large) Aero_Tech________ 801-292-0493

GRINDING AzMark_ __________480-926-8969

Industrialex_______ 303-456-6847 LA_Specialties________ 602-269-7612 Pilkington_Metal_Finishing_ 801-972-2146 Powder_Extreme_Coatings__ 801-450-2819 Star_Precision_ _______303-926-0559 Sandblasting Powder_Extreme_Coatings__ 801-450-2819 Silk Screening Arizona_Finishing______602-438-4443 Industrialex_______ 303-456-6847 Potting/Encapsulation Industrialex_______ 303-456-6847

• 57 • May/June 2013 57 •July/Aug 2011

A2Z METALWORKER A2Z METALWORKER

•

A Veteran-Owned Small Business

Shawn Carlin scarlin@gmsaz.com

Passivation

ChemResearch________ 602-253-4175 Diversified_Metal_Services__ 801-972-6093 Focused_on_Machining_ __ 303-922-3076 GMN_USA_ ________ 800-686-1679 Prec._Mach’d_Products____ 970-482-7676 Precision_Tech________801-285-7288 Ron_Grob_Co._ _______970-667-5320 Steel_Services_Grinding_ __ 800-662-0126 Superior_Grinding______ 801487-9700 Superior_Metal_Products___ 303-791-7550 TCI_Precision_Metals_ __800-234-5613 Grinding, Blanchard Diversified_Metal_Services__ 801-972-6093 Steel_Services_Grinding_ __ 800-662-0126 Superior_Grinding______ 801487-9700 TCI_Precision_Metals_ __800-234-5613 Grinding, Centerless Ron_Grob_Co._ _______970-667-5320 Grinding, Double Disc TCI_Precision_Metals_ __800-234-5613 Grinding: OD AzMark_ __________480-926-8969 Focused_on_Machining_ __ 303-922-3076 Precision_Tech________801-285-7288 Ron_Grob_Co._ _______970-667-5320 Superior_Grinding______ 801487-9700 Superior_Metal_Products___303-791-7550 Grinding: Surface ChemResearch________ 602-253-4175 Superior_Grinding______ 801487-9700 A2Z METALWORKER

•

58 •

May/June 2013

Gold Gold_Tech_Industries_____ 480-968-1930 Polishing Gold_Tech_Industries_____ 480-968-1930 Selective Coatings ImageTek_ ImageTek __________303-806-8111 FORMING D&B_Precision_Products___ 719-473-3699 Star_Precision_ _______303-926-0559 Wasatch_Laser_Processing__801-972-3500 HEAT TREATING Blanchard_Metals_Proc._ __801-972-5590 Phoenix_Heat_Treating_ __ 602-258-7751 Pilkington_Metal_Finishing__801-972-2146 Temperature_Processing___ 303-772-0250 Custom Temperature_Processing___ 303-772-0250 Cryogenics Temperature_Processing___ 303-772-0250 Aluminum Temperature_Processing___ 303-772-0250 Nitriding Temperature_Processing___ 303-772-0250 Vibrational Stress TestingTemperature_Processing___ 303-772-0250 INSPECTION Inspection, First Article Klontech_Measure_Sol____ 480-626-8131 Inspection Services Klontech_Measure_Sol____ 480-626-8131 Micropulse_West_______480-966-2300 Sustaining_Edge_Solutions__888-572-9642 IRON STITCHING Precision_Casting_Repair__801-972-2345 LASER CUTTING Laser Cutting Arrow_Sheet_Metal_Prod_303-427-6419

EMJD_Corporation_____303-761-5236 EMJD Corporation_____303-761-5236 GBC_ ____________303-988-6450 Howell_Precision_______ 623-582-4776 Kustom_Koncepts_ _____ 307-472-0818 Laser_Concepts_Inc._ ____ 801-280-7723 Progway___________ 435-656-9585 Richards_Fab_ _____ 801-409-0392 Star_Precision_ _______303-926-0559 Wasatch_Laser_Processing__801-972-3500 Wesco_Laser_Mchg._ ____ 303-765-5916 Wrico_ ___________480-892-7800 Laser Cutting: Non-Metal Wesco_Laser_Mchg._ ____ 303-765-5916 Laser Cutting: Pipe&Tube Wasatch_Laser_Processing__801-972-3500 Wesco_Laser_Mchg._ ____ 303-765-5916 EMI/RFI Shielding Industrialex_______ 303-456-6847 Laminating Wesco_Laser_Mchg.___303-765-5916 Laser Engraving 4_Axis_Machining_Inc.____ 303-295-1544 Laser Marking 4_Axis_Machining_Inc.____ 303-295-1544 LINE TOOLING RPM_CNC_Precision_Machine__ 208-442-199 MACHINING Advanced_Machining_Inc.__303-485-5256 American_Machine_&_Eng._ _ 801-973-0494 Apex_Engineering_____ 435-713-0072 BK_Machine_Inc.______ 801-253-1929 CM_Manufacturing_ ___ 406-543-4450 D&B_Precision_Products___ 719-473-3699 Datum_Machining______208-376-6099 Focused_on_Machining_ __ 303-922-3076 GBC_ ____________303-988-6450 H&R_Precision________ 801-975-7400 Mountain_View_Machine_ _435-755-0500

Peterson_Machining_____303-449-5755 R&H_Machine_________801-621-7922 RD_Machine_&_MFg____ 801-977-0447 Radtech__________ 303-789-4247 RPM_CNC_Precision_Machine_ 208-442-1999 Skydandee_Mfg______ 801-774-8031 St._Vrain__________ 303-702-1529 Superior_Metal_Products_ 303-791-7550 TVT_Die_Casting______ 800-280-2278 Machining: 3D Advanced_Machining_Inc.__303-485-5256 Micropulse_West_______480-966-2300 Machining: 5 Axis 4_Axis_Machining_Inc.____303-295-1544 5th_Axis_Fixtures______ 858-505-0432 Accutech_Machine______ 801-975-1117 Advanced_Machining_Inc.__303-485-5256 AzMark_ __________480-926-8969 Cling’s_Manufacturing____ 480-968-1778 Faustson___________303-420-7422 Howard_PMP__ _______ 801-808-4106 Peterson_Machining_____303-449-5755 Premier_Technology_Inc___208-785-2274 S.A._Composites_______ 970-776-3877 St._Vrain__________ 303-702-1529 Superior_Metal_Products_ 303-791-7550 Machining: Aerospace Advanced_Machining_Inc.__303-485-5256 AzMark_ __________480-926-8969 H&R_Precision________ 801-975-7400 CM_Manufacturing_ ___ 406-543-4450

Datum_Machining______208-376-6099 Howard_PMP__ _______ 801-808-4106 Matrix_Machine_____ 480-966-4451 Micropulse_West_______480-966-2300 Mountain_View_Machine_ _435-755-0500 Paramount_Machine_ ___801-282-2755 Peterson_Machining_____303-449-5755 Pinnacle_Precision_ ___435-563-2722 Ponderosa_Ind________ 303-298-1801 Precision_Mach’d_Products_ 970-482-7676 Precision_Tech________801-285-7288 Prescott’s_Mfg________ 719-482-5826 Quick_Turn_Precision_____801-334-6800 Radtech__________ 303-789-4247 RD_Machine_&_MFg____ 801-977-0447 Skydandee_Mfg______ 801-774-8031 St._Vrain__________ 303-702-1529 Superior_Metal_Products_ 303-791-7550 Machining: CNC 4_Axis_Machining_Inc.____303-295-1544 Able_Machining_&_Eng.__ 801-268-6766 Apex_Engineering_____ 435-713-0072 Advanced_Machining_Inc.__303-485-5256 Accutech_Machine______ 801-975-1117 American_Machine_&_Eng._ _ 801-973-0494 Apex_Engineering_____ 435-713-0072 Bar-S_Machine_______ 928-636-2115 BK_Machine_Inc.______ 801-253-1929 Cling’s_Manufacturing_ _ 480-968-1778 CM_Manufacturing_ ___ 406-543-4450 Datum_Machining______208-376-6099 DMSI___________801-972-6093 Faustson__________ 303-420-7422 Focused_on_Machining_ __ 303-922-3076 Foremaster_Tool_____ 801-737--0265 GBC_ ____________303-988-6450 H&R_Precision_______ 801-975-7400 H&_S_Machine_______ 801-755-7627 Hexatron_ _________ 801-363-8010

St. Vrain Manufacturing, Inc. “Precision Machining Solutions for Industry”

Robert Bergstrom President

819 So. Lincoln Street P. O. Box 1066 Longmont, CO 80502 Website: stvrainmfg.com

Phone: (303) 702-1529 x 103 Fax: (303) 702-1534 Email: bobb@stvrainmfg.com RFQ Email: mail@stvrainmfg.com

Howard_PMP__ _______ 801-808-4106 Innovative_Precision_ __ 801-334-6317 L.A.R._Manufacturing___ 801-280-3505 Leading_Edge_Machine__ 435-563-9425 _Maverick_Mold_&_Machine_ 970-535-4604 MicroMetals_________ 719-593-8367 Peterson_Machining_____303-449-5755 Pinnacle_Precision_ ___435-563-2722 Premier_Technology_Inc___208-785-2274 R&H_Machine_________801-621-7922 RD_Machine_&_Mfg_ ___ 801-977-0447 RPM_CNC_Precision_Machine_ 208-442-1999 St._Vrain__________ 303-702-1529 Star_Precision_ _______303-926-0559 Steen_&_Sons_Machine_Shop_208-522-7341 Superior_Metal_Products_ 303-791-7550 Tool_Design_______ 801-231-4404 Machining: Contract American_Machine_&_Eng._ _ 801-973-0494 Howard_PMP__ _______ 801-808-4106 Paramount_Machine_ ___801-282-2755 Radtech__________ 303-789-4247 Skydandee_Mfg______ 801-774-8031 Machining: DoD CM_Manufacturing_ ___ 406-543-4450 Machining: Laser AzMark_ __________480-926-8969 Faustson__________ 303-420-7422 Foremaster_Tool______ 801-737--0265 Gerome_Mfg________520-622-8402 Innovative_Precision_ __ 801-334-6317 L.A.R._Manufacturing___ 801-280-3505

Matrix_Machine______ 480-966-4451 Matrix MicroMetals_________ 719-593-8367 MicroMetals Paramount_Machine_ __ 801-282-2755 Paramount RD_Machine_&_Mfg_ ___ 801-977-0447 RD Machining:Medical Advanced_Machining_Inc.__303-485-5256 Advanced Datum Datum_Machining______208-376-6099 Pinnacle Pinnacle_Precision_ ___435-563-2722 Prescott’s_Mfg________ 719-482-5826 Machining: Milling Advanced_Machining_Inc.__303-485-5256 American_Machine_&_Eng._ _ 801-973-0494 Cling’s_Manufacturing____ 480-968-1778 Datum_Machining______208-376-6099 Focused_on_Machining_ __ 303-922-3076 Mountain_View_Machine__435-755-0500 Peterson_Machining_____303-449-5755 Ponderosa_Ind________ 303-298-1801 Prec._Mach’d_Products__970-482-7676 Precision_Tech________801-285-7288 Ron_Grob_Co._ _______970-667-5320 Steen_&_Sons_Machine_Shop_208-522-7341 Tool_Design_______ 801-231-4404

H&R_Precision________ H&R Precision 801-975-7400 Howard_PMP__ _______ 801-808-4106 Innovative_Precision_ __ 801-334-6317 L.A.R._Manufacturing___ 801-280-3505 Newport_Tool_ _______801-295-7411 Paramount_Machine_ __ 801-282-2755 Peterson_Machining_____303-449-5755 Ponderosa_Ind________ 303-298-1801 Prescott’s_Mfg_______ 719-482-5826 R&H_Machine_________801-621-7922 Radtech__________ 303-789-4247 RD_Machine_&_Mfg_ ___ 801-977-0447 RPM_CNC_Precision_Machine_ 208-442-1999 Star_Precision_ _______303-926-0559 Tool_Design_______ 801-231-4404 Machining: Prototype 4_Axis_Machining_Inc.____303-295-1544 Able_Machining_&_Eng.__ 801-268-6766 Accutech_Machine______ 801-975-1117 Machining: Mold Base Advanced_Machining_Inc.__303-485-5256 Maverick_Mold_&_Machine___970-535-4604 American_Machine_&_Eng._ _ 801-973-0494 Machining: Mold Making Apex_Engineering_____ 435-713-0072 R&H_Machine_________801-621-7922 Bar-S_Machine_______ 928-636-2115 Machining: Plastic BK_Machine_Inc.______ 801-253-1929 ImageTek_ _________ 303-806-8111 Cling’s_Manufacturing_ _ 480-968-1778 Faustson___________303-420-7422 Machining: Production Focused_on_Machining_ __ 303-922-3076 Able_Machining_&_Eng.__ 801-268-6766 Foremaster_Tool______ 801-737--0265 Apex_Engineering_____ 435-713-0072 H&R_Precision________ 801-975-7400 BK_Machine_Inc.______ 801-253-1929 CM_Manufacturing_ ___ 406-543-4450 Innovative_Precision_ __ 801-334-6317 Datum_Machining______208-376-6099 L.A.R._Manufacturing___ 801-280-3505 Faustson__________ 303-420-7422 Leading_Edge_Machine_ _ 435-563-9425 Focused_on_Machining_ __ 303-922-3076 Micropulse_West______ 480-966-2300 A2Z METALWORKER

• 59 •

May/June 2013

Wasatch_Laser_Processing__801-972-3500 Machining: Swiss Bar-S_Machine_______ 928-636-2115 HowardPMP________ 801-619-9850 Pinnacle_Precision_ ___435-563-2722 Ron_Grob_Co._ _______970-667-5320 White_Rock_Inc________ 435-750-6414

FOUNDER & CEO NATE WOODS nate@quickturn mach.com

3340 South 1500 W, Ogden, UT 84401

801-334-6800

www.QUICKTURNMACH.com

Mountain_View_Machine_ 435-755-0500 MicroMetals_________ 719-593-8367 Newport_Tool_ _______801-295-7411 H&R_Precision________ 801-975-7400 Quick_Turn_Precision_ __ 801-334-6800 Howard_PMP__ _______ 801-808-4106_ R&H_Machine_________801-621-7922 Newport_Tool_ _______801-295-7411 Radtech_ _________ 303-789-4247 Peterson_Machining_____303-449-5755 RD_Machine_&_Mfg_ ___ 801-977-0447 Pinnacle_Precision_ ___435-563-2722 RPM_CNC_Precision_Machine_ 208-442-1999 Ponderosa_Ind________ 303-298-1801 Skydandee_Mfg______ 801-774-8031 Precision_Machined_Prod.__ 970-482-7676 S.A._Composites________970-776-3877 Precision_Tech________801-285-7288 St._Vrain__________ 303-702-1529 RPM_CNC_Precision_Machine_ 208-442-1999 Superior_Metal_Products_ 303-791-7550 Superior_Metal_Products___303-791-7550 Tool_Design_______ 801-231-4404 Tool_Design_______ 801-231-4404 TVT_Die_Casting_ ______ 800-280-2278 Machining: Precision Machining: R & D 4_Axis_Machining_Inc.___ 303-295-1544 American_Machine_&_Eng._ _ 801-973-0494 Able_Machining_&_Eng.__ 801-268-6766 American_Machine_&_Eng._ _ 801-973-0494 Peterson_Machining_____303-449-5755 BK_Machine_Inc.______ 801-253-1929 Prescott’s_Mfg_______ 719-482-5826 CM_Manufacturing_ ___ 406-543-4450 Steen_&_Sons_Machine_Shop_208-522-7341 Focused_on_Machining_ __ 303-922-3076 Superior_Metal_Products___ 303-791-7550 A2Z METALWORKER

•

60 •

May/June 2013

Machining: Turning American_Machine_&_Eng._ _ 801-973-0494 Apex_Engineering_____ 435-713-0072 AzMark_ __________480-926-8969 Bar-S_Machine_______ 928-636-2115 BK_Machine_Inc.______ 801-253-1929 Datum_Machining______208-376-6099 Faustson__________ 303-420-7422 H&R_Precision________ 801-975-7400 HowardPMP________ 801-619-9850 Leading_Edge_Machine_ __ 435-563-9425 Mountain Mountain_View_Machine_ __ 435-755-0500 Prec Prec_Mach’d_Products_ ___ 970-482-7676 Premier Premier_Technology_Inc___208-785-2274 Quick Quick_Turn_Precision_ __801-334-6800 RD RD_Machine_&_Mfg_ ___ 801-977-0447 Steen Steen_&_Sons_Machine_Shop_208-522-7341 Tool Tool_Design_______ 801-231-4404 Wesco Wesco_Laser_Mchg______ 303-765-5916 Machining: Ultra-Precision Pinnacle Pinnacle_Precision_ ___435-563-2722 Machining: Waterjet Colorado Colorado_Waterjet_ ___970-532-5404 Quick Quick_Turn_Precision_ __801-334-6800 MANUFACTURING Group Group_Mfg_Serv______480-966-3952 Prescott’s_Manufacturing_719-482-5826 Prescott’s RD_Machine_&_Mfg_ ___ 801-977-0447 RD Composites S.A._Composites_______ 970-776-3877 S.A. Contract Apex_Engineering_____ 435-713-0072 Apex Manufacturing: Electrode Wire-Tech_ ________ 480-966-1591 Production Aero_Tech_ ________ 801-292-0493 BK_Machine_Inc.______801-253-1929 EMJD_Corporation_____303-761-5236 L.A.R._Manufacturing___ 801-280-3505 Laser_Concepts_Inc.____ 801-280-7723 Prescott’s_Manufacturing_719-482-5826 Steen_&_Sons_Machine_Shop_208-522-7341 White_Rock_Inc________ 435-750-6414 Rapid Prototyping White_Rock_Inc________ 435-750-6414 Robotic CNC DMSI____________ 801-972-6093 Routering CNC DMSI____________ 801-972-6093 Small Part Pinnacle_Precision_ ___435-563-2722 White_Rock_Inc________ 435-750-6414

Turnkey Product Services Aero_Tech_ ________ 801-292-0493 L.A.R._Manufacturing___ 801-280-3505 Accuwright_Industries___480-892-9595 METAL INJECTION MOLDING (MIM) AFT_ ____________ 303-833-6112 Progway___________435-656-9585 METAL STAMPING Hi-Production Precision Stamping Precision_Die_&_Stamping__480-967-2038 Thompson_Machine_____ 505-823-1453 METALIZING Accuwright_Industries___480-892-9595 MOLDING: ARC Watkins_Tool_&_Supply__303-295-9603 MOLDS Colorado_Tool_Design_Inc_ 720-218-5246 Lifetime_Products_____ 801-728-1260 Maverick_Mold_&_Machine_ 970-535-4604 Prescott’s_Manufacturing_719-482-5826 Progway__________435-656-9585 Molds: Blow Lifetime_Products_____ 801-728-1260 Molds: Plastic Injection Lifetime_Products_ _____801-728-1260 Maverick_Mold_&_Machine_ 970-535-4604 Watkins_Tool_&_Supply_ _ 303-295-9603 Molds: DieCast Design Colorado_Tool_Design_Inc_ _ 720-218-5246 Molds: Injection Design Colorado_Tool_Design_Inc_ _ 720-218-5246 Molds: Trim Die Design Colorado_Tool_Design_Inc_ _ 720-218-5246 Molds Steel DMSI____________ 801-972-6093 Aero_Tech_ ________ 801-292-0493 Arizona_Finishing_____602-438-4443 ChemResearch_ _____ 602-253-4175 Jet_Processing____ 623-869-6749x117 Mil Spec Painting Industrialex_______ 303-456-6847 PAINTING Richards_Fab_ _____ 801-409-0392 PARTS: MISC. Lifetime_Products_ _____801-728-1260 PLATING Blanchard_Metals_Proc.__ 801-972-5590 ChemResearch_ _____ 602-253-4175 Collins_Metal_Finishing_ __ 602-275-3117 Foresight_Finishing_ ____ 480-921-0000 Gold_Tech_Industries_ __ 480-968-1930 LA_Specialties_______ 602-269-7612 Anodizing Blanchard_Metals_Proc._ __801-972-5590

A2Z METALWORKER

• 60 •

May/June r2013

ChemResearch________ 602-253-4175 Collins_Metal_Finishing_ __ 602-275-3117 Jet_Processing_____ 623-869-6749x117 Pilkington_Metal_Finishing_ 801-972-2146 Gold/Silver Plate Foresight_Finishing_ ____ 480-921-0000 Gold_Tech_Industries_ __ 480-968-1930 Nickel/Chrome Gold_Tech_Industries_ __ 480-968-1930 Tin Plate Gold_Tech_Industries_ __ 480-968-1930 POLISHING Gold_Tech_Industries_ __ 480-968-1930 LA_Specialties_______ 602-269-7612 PRECISION FORMING Richards_Fab________801-409-0392 Thompson_Machine______ 505-823-1453 Wrico_ ___________480-892-7800

,-./012%($012'!034" 5*67+*6(809:0;/-/< 9$==>0;;;?;.-?@A-/

!"#$%&'()'"*++(,*+'-./ 0#""#+-#.(,*+'-./(( 1-2"3'-#.(,*+'-./

!!!"#$%#$&'(')"#*+

SPRINGS Flat & Wire SPRING_WORKS_Utah_ ___ 801-298-0113 STAMPING Cygnet____________ 818-240-7574 Dayton_Rogers_ ______ 763-717-6303 Frontier_Metal_Stamping_ _ 303-458-5129 Lifetime_Products_ _____801-728-1260 Pacific_Metal_Stampings___ 661-257-7656 Precision_Die_&_Stamping__480-967-2038 Richards_Fab_ _____ 801-409-0392 Thompson_Machine_ __ 505-823-1453 PRINTING Weiser/Mile_High_Prec._303280-2778 Custom Screen Stamping:Aerospace ImageTek__________303-806-8111 PROCESSING: METAL Frontier_Metal_Stamping_ _ 303-458-5129 Pacific_Metal_Stampings___ 661-257-7656 Chemical Precision_Die_&_Stamping__480-967-2038 LA_Specialties________ 602-269-7612 Stamping:Assembly PUNCHING Frontier_Metal_Stamping_ _ 303-458-5129 Group_Manufacturing_Serv_ 480-966-3952 Stamping:Bending Star_Precision_ _______303-926-0559 Pacific_Metal_Stampings___ 661-257-7656 REPAIR Stamping:Deep Draw Bearing Surface Thompson_Machine_____ 505-823-1453 Denver_Machine_Shop____303-295-6000 Stamping:Design Hydraulic Cylinder Frontier_Metal_Stamping_ _ 303-458-5129 Denver_Machine_Shop____303-295-6000 Pacific_Metal_Stampings___ 661-257-7656 ROLL FORMING Lifetime_Products_ _____801-728-1260 Weiser/Mile_High_Prec._303280-2778 Stamping:Flat Forming Rolling: thread SPRING_WORKS_Utah_ ___ 801-298-0113 Ron_Grob_Co._ _______970-667-5320 Stamping: Light ROUTERING, CNC Cygnet____________ 818-240-7574 Micropulse_West_______480-966-2300 Pacific_Metal_Stampings___ 661-257-7656 SAW CUTTING SPRING_WORKS_Utah_ ___ 801-298-0113 Diversified_Metal_Services__ 801-972-6093 Stamping:Precision SHOT PEENING Cygnet____________ 818-240-7574 Blanchard_Metals_Proc._ __801-972-5590 Frontier_Metal_Stamping_ _ 303-458-5129 SINTERING Pacific_Metal_Stampings_ __ 661-257-7656 Western_Sintering______509-375-3096 Precision_Die_&_Stamping__480-967-2038 SPINNING: METAL Metal_Spinning_Solutions__ 480-899-0939 Stamping:Prototype SPLINES Frontier_Metal_Stamping_ _ 303-458-5129 Hexatron_ _________ 801-363-8010 Stamping:Short Run Specialty_Steel_Services__ 801-539-8252 Cygnet____________ 818-240-7574 SWISS SCREW MCHG. SPRAY: METAL, PLASMA Accuwright_Industries____480-892-9595 Howard_PMP__ _______ 801-808-4106

Quick_Turn_Precision_ Turn Precision____801-334-6800 801-334-6800 White_Rock_Inc_ White Rock _______ 435-750-6414 QQuick Screwing: Lead WELDING Able_Machining_&_Eng.__ 801-268-6766 Ron_Grob_Co._ _______970-667-5320 Arrow_Sheet_Metal_Prod___ 303-427-6419 TAPPING D&B_Precision_Products___ 719-473-3699 Laser_Concepts_Inc._ ____ 801-280-7723 Dayton_Rogers_ ______ 763-717-6303 TEST FIXTURES RPM_CNC_Precision_Machine_ 208-442-1999 Denver_Machine_Shop____303-295-6000 GBC_ ____________303-988-6450 TESTING Testing: Corrosive H&_S_Machine_______ 801-755-7627 CascadeTEK_ ________888-835-9250 JQ_Enterprises________ 801-975-0777 Testing: Non-Destructive Kustom_Koncepts_ _____ 307-472-0818 Laser_Concepts_Inc._ ____ 801-280-7723 Blanchard_Metals_Proc._ __801-972-5590 MicroMetals_________ 719-593-8367 CascadeTEK_ ________888-835-9250 Mountain_View_Machine_ _435-755-0500 Jet_Processing_____ 623-869-6749x117 Precision_Casting_Repair_ _801-972-2345 Pilkington_Metal_Finishing___ 801-972-2146 Precision_Tech________801-285-7288 THERMAL SPRAY Premier_Technology_Inc___208-785-2274 Accuwright_Industries____480-892-9595 Quick_Turn_Precision_____801-334-6800 TOOL & DIE Richards_Fab_ _____ 801-409-0392 Foremaster_Tool______ 801-737--0265 Star_Precision_ _______303-926-0559 Newport_Tool_ _______801-295-7411 Wasatch_Laser_Processing__801-972-3500 Thompson_Machine_____ 505-823-1453 Wrico_ ___________480-892-7800 Weiser/Mile_High_Prec._303280-2778 Welding: Aluminum TOOLING Medium & Large Frontier_Metal_Stamping_ _ 303-458-5129 MicroMetals_________ 719-593-8367 Mountain_View_Machine_ _435-755-0500 Premier_Technology_Inc___208-785-2274 Precision_Tech________801-285-7288 Skyline_Products________719-392-9046 Western_Sintering______509-375-3096 Richards_Fab_ _____ 801-409-0392 TUBE FORMING Welding: Orbital Cling’s_Manufacturing____ 480-968-1778 Howell_Precision_______ 623-582-4776 Richards_Fab_ _____ 801-409-0392 Formed Tubing Welding: Precision Cling’s_Manufacturing____ 480-968-1778 Arrow_Sheet_Metal_Prod___ 303-427-6419 Howell_Precision_______ 623-582-4776 D&B_Precision_Products___ 719-473-3699 Tube Bending /Fabrication MicroMetals_________ 719-593-8367 Cling’s_Manufacturing____ 480-968-1778 Premier_Technology_Inc___208-785-2274 Howell_Precision_______ 623-582-4776 Richards_Fab_ _____ 801-409-0392 WATERJET CUTTING Weiser/Mile_High_Prec._303280-2778 Colorado_Waterjet_ __ 970-532-5404 Welding: TIG Diversified_Metal_Services__ 801-972-6093 Arrow_Sheet_Metal_Prod___ 303-427-6419 JQ_Enterprises________ 801-975-0777 GBC_ ____________303-988-6450 Leading_Edge_Machine_ __435-563-9425 Mountain_View_Machine___ 435-755-0500_ Marzee_Inc._______ 602-269-5801 WIRE FORMING MicroMetals_________ 719-593-8367 Mountain_View_Machine_ _435-755-0500 SPRING_WORKS_Utah_ ___ 801-298-0113 61 2013 61••May/June July/Aug 2009

2 AA2Z Z METALWORKER METALWORKER••

Index of Advertisers 4 Axis Machining, Inc...57 5th Axis Fixtures...44,52 Able Machine & Engineering...60 ABS Quality Evaluations...54 Accutech Machine Inc...57 Accuwright Ind....59 Action Machine....49 Advanced Coordinate Tech...50 Advanced Machining Inc...58 Aero Tech Mfg...56 AFT...60 AgieCharmilles...19,60 AIT...11,51 AllWorld Machinery Supply..54 Almar...27,50 AME, Inc...50 American Global Standards...54 APEX Engineering...59 Arizona Finishing...58 AZ Tool Steel...55 Arrow Sheet Metal...57 AZMark Aerospace...55 bandsawreviews.com...47 Bar-S Machine, Inc...56 Bemsco...56 BK Machine Inc...61 Blackhawk Industrial...49,51 Blanchard Metals Proc...56 Blaser Swisslube...50 BMSC..34,54 Bytebox...50 Canyon State Oil ...49,50,64 CascadeTEK...61 Castrol ...50,51,52,64 ChemResearch...32,57 Christensen Oil...64 Cling’s Manufacturing...58 CM Manufacturing...59 Coastal Metals...14,52 Coating Technologies...57 College of Western Idaho...54 Collins Metal Finishing...57 Colorado Tool Design, Inc...58 Colorado Waterjet...58 Critical Cut...55 Cygnet Stamping...57 D&B Precision Products...56 Datum Inspection Services...52 Datum Machining...58 Davis Applied Tech College...51 Dayton Rogers...55 DCM Tech...38,49 Delcam...49 Denver Machine Shop...56 A2Z METALWORKER

•

62 •

Desert EDM Sales...52 DMSI...55 Edge Technologies...52 EDM Network...31,51 EDM Performance Accessories...51 EMJD Corp....57 Erickson Metals...49 Fabricating Equipment Sales..34,51 Fadal CNC...8,50 Falcon Sheet Metal...59 Faustson...24,56 Flow International..49 Focused On Machining...58 Foothills Machinery..7,21,49 Foremaster Tool...59 Foresight Finishing...57 Frontier Metal Stamping...60 Gage Lab Products...51 Ganesh Machinery...21 GBC...56 Gladhill Assoc...24,49 Global EDM Supply...50 GMN USA...50 Gold Tech Industries...20,55 Great Western Registrar...54 Group Manufacturing...56 H&R Precision...56 HAAS Automation...2,49 Hangsterfers...50 Hartwig...49 Haynes Intl...52 Helical Solutions...51 Hexatron...57 Howell Precision...38,57 Horizon Carbide...51 Howard PMP...46,60 Image Tek...57 Industrialex...55 Industrial Heat Treat Co...57 Innovative Precision...55 IRH...52 Iron & Metals, Inc...12,52 J.M. Grisley...17,49 Jet Processing...58 Jordan River Galvanizing...59 Jorgensen Machine Tools ...49,52 JQ Enterprises...60 K.D. Capital Equipment...51 King Machine...21,49,52 Klontech Industrial..50,51 Kodiak Ind...50 Kustom Koncepts...56 L.A. Specialties...56 L.A.R. Manufacturing...55

May/June 2013

Laser Concepts...58 Leading Edge Machine...58 Lifetime Products, Inc...56 Marshall Tool...43,51 Marzee...40,57 Matrix Machine Inc...56,57 Maverick Mold & Machine...55 May Foundry & Machine...55 MEP...51 Metal Spinning...56 Metal Supermarkets...26,51 Methods ...49 Micro 100...44,50 MicroMetals..56 Micropulse West ...55 Midaco..52 Monckton Mach...2,33,49,53 Mountain View...55 Muratec...52 Newport Tool...59 Ogden-Weber Tech College...51 OGP...50 Omax...49 Orion Registrar...51 Pacific Metal Stampings...61 Paramount Machine...56 Peterson Machining...59 Phoenix Heat Treating...58 Pilkington Metal Finishing...57 Pinnacle Precision..59 Plus Ten Stainless...30 Ponderosa Industries...58 Powder Extreme Coatings...55 Precision Casting Repair...55 Precision Die & Stamping....61 PrecisionFab Inc...52 Precision Mach’d Products...60 Precision Tech...59 Premier Precision...58 Premier Technology Inc...59 Prescott’s Mfg...55 Prime Axis Machine...16 Progway...57 Qualichem...52 QuickTurn Precision...60 R&H Machine...58 Radtech..59 RD Machine...60 ResourceMfg...35,56 Richards Fab...56 RPM CNC Precision Machine...55 RMTMA...46 Rocky Mountain Saw Blades...48,52 Roentgen USA...52

Ron Grob CO....57 Ryerson...25,51,52 SA Composites...55 S&S Machinery...50 Samuel Son & CO..13,39,52 Sandvik...49 Schenk Intertech..54 Seco Tools Inc...50 Self Clinch Direct...51 Sentry Insurance...36,54 Setco Spindles & Slides...50 Shop Floor Automations...51 Shop Tools, Inc..10,50 Skydandee Mfg...55 Smith Machinery..15,49,63 Specialty Steel Serv....36,56 SPRING WORKS Utah...60 St.Vrain Manufacturing...59 Star Metal Fluids...3,49,50,51 Star Precision...56 State Brass Foundry & Machine...56 Steel Services Grinding...57 Steen & Sons Machine..1,28-29,58 Superior Grinding..18,57 Superior Metal Products...60 Supra Alloys, Inc...52 Sustaining Edge Solutions...50 TCI Precision Metals...37,51 Team Industrial Services..49,51 Temp Processing...56 Todd Machinery...49 Thompson Machine...57 Tool Design...56 Total Quality Systems...50 Tornos...9,49 Toyo Tanso USA...50 trajansaw.com...5 Triad Machinery...50 Trusty Cook...23,54 TVT Die Casting...22,55 Universal Laser Systems...22 United Performance Metals...42,53 Utah Metal Works, Inc...16,52 Wasatch Laser Forming...59 Watkins Tool & Supply...47,54 Weiser/Mile High Precision...61 Wesco Laser Machining...57 WESTEC...41 Western Sintering...61 Western States Calibration...53 Western States Metals...51 White Rock...61 Wrico Stamping...57

www. smithmachinetools.com “Providing Technology Solutions for Competitive Manufacturing” “They (Smith Machinery) do what they say they will do, and their support is everything we expect from our machine tool suppliers.”

Now with 2 local factory service technicians.This, combined with our Smith Neotech service group, will provide you with the best service support available in the Mountain States.

“ S m i t h Machinery, our dealer for the Mazak line of machine tool p ro d u c t s, i s o u t s t a n d i n g.

They sell a great product and their service and support is exceptional.”

“We had 3everal different manufacturers perform competitive test cuts for our evaluation, and the Mitsubishi came out on top. It took 1/3 less time to cut the part, and it used 1/3 less wire consumption for a comparable finish and accuracy.”

MITSUBISHI EDM, Laser, Waterjet, VMCs, Milling Machines & Press Brakes

www. smithmachinetools.com “Providing Technology Solutions for Competitive Manufacturing”

Star Swiss CNC

“They (Smith Machinery) do what they say they will do, and their support is everything we expect from our machine tool suppliers.”

Now with 2 local factory service technicians.This, combined with our Smith Neotech service group, will provide you with the best service support available in the Mountain States.

CNC Tool & Cutter Grinders MITSUBISHI

EDM, Laser, Waterjet, VMCs, Milling Machines & Press Brakes

Proud member of

“ S m i t h Machinery, our dealer for the Mazak line of machine tool p ro d u c t s, i s o u t s t a n d i n g.

They sell a great product and their service and support is exceptional.”

Star Swiss CNC

“We had 3everal different manufacturers perform competitive test cuts for our evaluation, and the Mitsubishi came out on top. It took 1/3 less time to cut the part, and it used 1/3 less wire consumption for a comparable finish and accuracy.”

CNC Tool & Cutter Grinders

Combination “Teach” Lathes

Combination “Teach” Lathes

Sheet Hydroforming

SMITH MACHINERY CO., INC. Proud member of

SMITH MACHINERY CO., INC.

Sheet Hydroforming

ISO 9001: 2008 Certified

41 West Guest Avenue Salt Lake City, UT 84115 Phone: 801-263-6403 Fax: 801-263-6404

ISO 9001: 2008 Certified

41 West Guest Avenue Salt Lake City, UT 84115 Phone: 801-263-6403 Fax: 801-263-6404

SUPERIOR PRODUCTS • SUPERIOR SUPPORT • SERVICE • APPLICATIONS • SALES

SUPERIOR PRODUCTS • SUPERIOR SUPPORT • SERVICE • APPLICATIONS • SALES

A2Z Metalworker P. O. Box 93295 Phoenix, AZ 85070

maximize productivity and reduce costs with the power of castroL high performance products IT’S WHAT’S ON THE INSIDE THAT COUNTS …

Inside every Castrol drum is cutting edge technology that is proven to impact process efficiency and operating costs.

Offering a wide range of products to meet your application needs, we provide the maximum performance benefits you seek, accompanied by world-class service and technical expertise. Castrol’s line is broad enough to cross all applications, yet refined enough to fulfill the intricate needs of the specialty markets we serve.

THE RIGHT LINE OF PRODUCTS

the technoLogy inside

• Cutting & Grinding • High Performance Lubricants • Greases • Deformation • Cleaners • Corrosion Preventatives • Chain Oils

Discover why only Castrol Industrial has THE TECHNOLOGY INSIDE. Castrol Industrial North America Inc. l 150 West Warrenville Rd. 603-1E l Naperville, IL 60563 l techhelp@castrol.com l castrol.com/industrial

Christensen Oil Christensen Provo, UT Oil Provo, UT christensenoil.com christensenoil.com 11800 654 0438 800 654 0438 A Z METALWORKER • 64 •May/June 2013& Idaho Serving Serving Utah Utah & Idaho 2

Canyon State Oil Maxum Petroleum www.canyonstateoil.com canyonstateoil.com

800894 894 7773 7773 1 1800

Serving Colorado