Manual for Hydraulic Capstan C2000 Angle Bracket

INSTRUCTIONS FOR USE

HYDRAULIC CAPSTAN C2000 ANGLE BRACKET PLEASE READ BEFORE INSTALLING AND USING THE EQUIPMENT

GENERAL INFORMATION As a result of many years of development and experience, our capstan is a high quality product and will master the toughest marine environment conditions.

Durability and few parts provide a very user-friendly and safe product for handling moorings and in fish farming.

• • • • •

Manufactured in aluminum.

Easy to mount on deck.

Few wearing parts.

Drawing shows the standard edition.

The capstan can be delivered in different designs.

CAPSTAN C2000

INSTALLATION CAPSTAN C2000

INSTALLATION OF CAPSTAN ON FOUNDATION When installing the unit, it must be ensured that the foundation is calculated for the load to which it is exposed.

When the capstan is to be mounted firmly in the foundation, all screw holes must be in use. Make sure that it is stuck in gear.

CAPSTAN C2000

HYDRAULIC ASSEMBLY CONTROL VALVE A control valve with a spring load (not included) MUST be used so that the valve moves to the “neutral” position when releasing the control lever/pedal. The capstan will then stop. This can be delivered adapted to each individual vessel.

LOAD CARRIER VALVE A load carrier valve MUST be fitted so that the capstan handles the load in a controlled manner. Pipes should be used between engine and valve.

EMERGENCY STOP An emergency stop (not included) MUST be installed in the work area.

This can be delivered adapted to each individual vessel.

COUPLINGS Use fittings and hoses that are designed for the specified amount of oil and pressure.

CAPSTAN C2000

START-UP / TEST DRIVING

• • • •

The emergency stop system must be tested.

Control valve / pedals are tested.

During test driving, hoses and couplings must be checked for leaks and damage.

Oil pressure on control valve and load holding valve is set according to specified values.

CAPSTAN BetjeningC2000

OPERATION OF LORENTZEN HYDRAULICS CAPSTAN

The capstan is a winch that will handle heavy loads. It is therefore very important that all movements are performed well considered and safe, so that accidents are avoided.

TO ENSURE PROPER OPERATION OF THE CAPSTAN, WE WOULD LIKE TO EMPHASIZE THE FOLLOWING:

• • •

Before use, the user MUST find out where and how the emergency stop works.

Before use, the user MUST be informed about / trained in handling pinch points in the work area.

The user MUST be familiar with maneuvering / driving / using the product.

CAPSTAN C2000

MAINTENANCE ENGINE Make sure that the oil in the hydraulic system is clean. This will extend the service life.

HOSES / PIPES AND COUPLINGS It is recommended that hoses and couplings be checked once a month for damage / corrosion and leaks.

Check that links are secure.

Damaged hoses and connections MUST be replaced before further use.

CAPSTAN Make sure that both the capstan and the lid at the top are tight.

TECHNICAL SPECIFICATIONS Engine Valve

MVW 630 Double load lowering valve

Traction

2000 kg

Pressure

approx. 200 bar

Load carrier valve pressure

approx. 110 bar

Recommended oil quantity

30 l/min

Speed

2 r/litre

Weight (standard length)

50 kg

Minimum size of fittings

1/2”

CAPSTAN BetjeningC2000

1

2

3

4

230

430

255

160,01

250

4

230

340,475

6

75

14

15

70

430

75

47,05

100

150 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:

FINISH:

46,74

350

NAME

SIGNATURE

DATE

122,97

3

52,03

47

DRAWN

340,47

CHK'D

393,79

APPV'D MFG Q.A

1

2

MATERIAL:

WEIGHT:

CAPSTAN C2000

WARRANTY All our products have 24 months

Defective parts are replaced at net

warranty against defects or deficiencies.

purchase price. Labor costs for removal

For wear parts, the warranty period is

and installation of defective parts are not

12 months. The warranty period applies

covered by the manufacturer. Exceptions

from the delivery date.

for this will be made only in special cases and if the manufacturer has accepted

The manufacturer reserves the right to

this.

decide whether the defective part should be repaired or replaced with overhauled

The warranty period does not apply to

or new parts.

damage that has occurred as a result

Complaint work can not be initiated until approval has been obtained from

of normal wear and tear, incorrect installation, incorrect use or lack of maintenance.

the manufacturer.

Office: 76 06 63 30 Direct: 97 50 06 66

Lorentzen Hydraulikk AS Postbox 74, 8309 Kabelvåg Norway

mail@lormek.no www.lormek.no

- leading manufacturer and supplier of deck equipment along the Norwegian coast -