Osram Australia

www.osram.com.au

Flexibility in full colour.

Professional lighting solutions with lED from oSram.

OSRAM AUSTRALIA / NEW ZEALAND APRIL 2007

introDuCtion

a fascinating interplay between form and colour: lED lighting solutions from oSram. lEDs are superior to conventional light sources in many respects and are extremely versatile. they are impressive for their wide colour palette and excellent colour saturation. their low power consumption and long life make them particularly economical. lEDs are therefore ideal as simple and efficient light sources not only for fascinating lighting effects but also for a wide range of applications in the general lighting sector. lED modules from oSram are the perfect basis for innovative lighting solutions. thanks to their compact dimensions, they are especially suitable for illuminating linear and flexible structures and for backlighting surfaces. in combination with oPtotroniC® power supplies and controls, lED systems provide perfectly matched lighting solutions. with our lED lamps and our range of connection-ready luminaires, it has never been easier to install lED technology.

2

atmospheric lighting for a bar on the Copacabana

CONTENTS

Effective lighting for a corridor

innovative lighting with lED systems

4

oSram lED technology

6

the oSram lED system concept

8

High Flux lED Systems

10

COINlight-OSTAR®

10

LINEARlight-DRAGON™ AND OPTOTRONIC® LINEARlight-DRAGON™

11 12

DRAGONeye® AND OPTOTRONIC® DRAGONeye® DRAGONpuck® DRAGONtape® DRAGON-X

13 14 15 16 17

linEarlight

18

LINEARlight POWER Flex LINEARlight Flex LINEARLIGHT

19 20 21

linEarlight anD oPtotroniC®

22

linEarlight Colormix anD EaSy Color Control

23

LINEARlight Colormix Flex LINEARlight Colormix EFFECTlight COINlight

24 25 29 30

illuminated Signage

31

BACKlight BL02 BACKlight BL04 BACKlight LM03A DRAGONchain

32 33 34 35

aqualED anD aqualED Dragon™

36

oPtotroniC® PowEr SuPPliES

37

OPTOTRONIC – Indoor Applications OPTOTRONIC – Outdoor Applications OPTOTRONIC for RGB / DALI OPTOTRONIC EASY RGB OPTOTRONIC Constant Current

38 39 40 42 43

HilitE lED illuminated acrylic tubes

44

HILITE LED HILITE RGB Colourmix

45 46

orDEr numBErS

47

stylish desktop lighting 3

innovative lighting with lED systems

innovative, creative, economical: lighting solutions with lED systems. lED systems are the ideal basis for creative ideas and new lighting solutions. oSram offers innovative modular systems that open up hitherto unknown opportunities and perspectives. oSram can look back on more than 100 years of experience in the lighting industry.

Competence from a single source: LED systems from OSRAM. As a global player in the semiconductor market, OSRAM has core competence in the development and manufacture of optical semiconductor components and in all aspects of the manufacture of LED systems – from individual LEDs to complete modules, including electrical, thermal and optical design. OSRAM also offers a range of OPTOTRONIC® electronic control gear and controllers ideally matched to the LED modules. The entire range is rounded off with accessories for the various modules.

OSRAM has more than 30 years of experience and know-how in opto-electronics. As one of the largest manufacturers of opto-electronic components and modules, OSRAM develops and produces specially optimized LED systems for a wide range of applications.

What‘s more, at all stages in the implementation of your projects, you have direct access at all times to the know-how we have built up in numerous successful applications. We will be pleased to offer you support and advice in all aspects of high-quality lighting.

Left: shu Café in Milan with a total of 275 LINEarLIGHt Colormix modules offering color sequencing, controlled for example with OPtOtrONIC® EasY 60

4

Main picture: accent and walkway lighting at a kiosk on the Copacabana, rio de Janeiro, Brazil with DraGONpuck® and COINlight modules Left: Backlighting of translucent glass with LINEarlight Colormix in the Lufthansa Business Lounge at terminal 2, Munich airport

Versatile applications.

• Interior design and general lighting • Architecture lighting • Illuminated signage • Illuminated lettering and corporate lighting • Orientation lighting in buildings and outdoors • Escape route marking • Designer and built-in luminaires • Illuminated information signs • Traffic signalling

5

oSram lED technology

tiny light with enormous strengths: all you need to know about lEDs. light emitting diodes are based on semiconductors that convert electric current into light. measuring just a few centimeters in length, lEDs are a valuable alternative to conventional light sources in many areas of general lighting. nEw: in warm wHitE

New lighting technology.

In contrast to incandescent lamps, which produce a continuous spectrum, an LED emits light of a particular color.

The color of the light depends on the semiconductor material used.

White light.

To produce white light, the light of blue LEDs is passed through yellow phosphors.

The composition of the phosphor determines the light color.

The Chip Level Coating (CLC) process developed and patented by OSRAM ensures a degree of homogenity in the

6

light produced that other processes cannot achieve.

By selecting appropriate white LEDs, it is possible to offer LED systems with the same light colors as fluorescent lamps (Warm White, Neutral White and Daylight).

top left and right: OsraM LED systems show just how powerful they are as the exclusive light sources in the corridors of the impressive turning torso tower in Malmö, sweden.

Bottom right: More than 16,000 Golden DraGON® high-flux LEDs on 2700 specially designed DraGONtape® modules, operated with 350 OPtOtrONIC® 75 units, bathe the corridors in the turning torso tower in a pleasant uniform light.

Technological highlights.

• Creative design options thanks to a variety of colors, compact dimensions and the versatility of the modules • Major economic benefits thanks to low energy consumption, long life and low maintenance • Maximum reliability even under adverse ambient conditions • High breaking strength and vibration resistance

7

the oSram lED system concept

State of the art: lED systems from oSram. oSram offers a pioneering range of high-performance modular lED systems for use in general and effect lighting.

Three areas of application: • General lighting • Decorative lighting • Illuminated lettering/advertising Benefits of the LED modules at a glance.

• Extremely low-profile elegant lighting solutions thanks to low height, simple installation and ease of integration in the architecture • Flexible adaptation to small structures thanks to compact flexible modules • Optional optics for various modules to produce different beam characteristics • Backlighting of translucent surfaces of minimal depth • Injection of light into structured glass or appropriate acrylic materials • Ideal for illuminating heat-sensitive materials, for example in museums, or for operation with solar power and batteries • Suitable for use outdoors if appropriately protected

Benefits of OPTOTRONIC® control gear • Very low power consumption thanks to high efficiency • Small space requirements thanks to compact functional design • Several LED modules can be connected in parallel or in series within the specified output range • Impressive reliability through long life • Wide permissible ambient temperature range • Electrical isolation between the primary side and the secondary side (SELV equivalent) • Long permitted secondary cables • Protection class III luminaires and luminaires with l and qq labels can be operated without the need for additional measures • Protection mechanisms for short-circuit, overtemperature and overload • All the units meet the necessary standards for lighting technology; it is therefore easy for them to be integrated in luminaires • The guarantee for the systems, LED modules and OPTOTRONIC® control gear can be extended to 3 years

The latest data sheets can be found on the internet at www.osram.com/products/led-systems/downloads.html Check out other online tools such as the LED deSIGNer program

8

top: route marking at a railway station in Prague, Czech republic (source: Hess Form + Licht) top right: LED luminaire with COINlight® Center right: Lights in a subway system Center left: Hotel Bar at the »La strada« Hotel, Kassel, illuminated with LINEarlight Flex® Modules.

Bottom right: sidewalk lighting with LINEarlight modules in outdoor housings Bottom left: Illuminated signage with a corona effect from side-emitting LINEarlight Flex® LM11a modules

9

High-Flux LED-SystemS – Coinlight-ostar®

New: In warm white 31,5

M3

29,2

51

All figures in mm

Product- reference

Productnumber

COINlight-OSTAR® C006A-W3-865 C006A-W3-854 C006A-W3-847 C006A-W3-733

4008321187598 4008321187611 4008321189950 4008321187635

white white white warm white

1 1 1 1

24 V 24 V 24 V 24 V

12 W 12 W 12 W 12 W

25° 25° 25° 25°

6500 K 5400 K 4700 K 3300 K

The modules are perfectly matched to OSRAM OPTOTRONIC® 24 V converter Dimensions: Ø 51 mm, h: 29.2 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

The COINlight-OSTAR® module is a round high-power spotlight with an integrated primary heat sink. Only one OSRAM OSTAR®-Lighting is needed to produce light.

Special features • Easy to integrate in standard luminaires • Integrated 25° optics • M3 internal thread for simple installation • Fitted with three connecting cables: Red +; Black -; White • Dimming • Cable length 400 mm, diameter 0.5 mm • Dimmable by pulse width modulation (PWM) • The modules can only be connected in parallel • Up to six modules can be connected one after the other with mid-feed with only one OT 75 unit

COINlight-Ostar® indoors: Floor lighting in a hotel foyer, England

10

Applications • Ideal for use in recessed ceiling lights or shop lighting • Perfect for orientation or accent lighting

COINlight-Ostar® outdoors: subtle stylish garden path lighting in an outdoor housing.

20 20 20 20

linEarlight-Dragon™ anD oPtotroniC®

the power to be creative. this flexible modular system consists of three components: a metallic lED circuit board with 6 high-power lEDs, a lens holder and a heat sink. these can be extended to create entire high-quality systems and are easy to install with the help of clamps.

The systematic approach to modular lighting.

LINEARlight-DRAGON™ • Linear, high-power LED strip with 6 white Golden DRAGON® LEDs • Plug & Play (feeder and connector) thanks to the CONNECTsystem LD-2x • Optical system with 30° lenses and lens holder • Dimmable • Designer heat sink casing

OPTOTRONIC® for 24 V LED modules • Compact, functional design with cable clamp • Parallel connection of multiple LED modules • Safe operation thanks to electrical isolation between the primary and the secondary side (SELV equivalent) • Secondary lines of up to 10 m possible • Reversible short-circuit, overtemperature and overload protection

The perfect connection: LINEARlight-DRAGON™ and OPTOTRONIC® OT 75 OPTOTRONIC® OT 75/200-240/24

2 rows, each with up to 3 1) LINEARlight-DRAGON™

Technical data Product reference LD06A LINEARlight-DRAGON™ OPTOTRONIC® OT 20/230-240/24 OPTOTRONIC® OT 75/220-240/24

Voltage 24 V 24 V 24 V

Dimensions (L/W/H) 307 x 36 x 26 mm 109 x 50 x 35 mm 220 x 47 x 44 mm

Output/light colour 12 W, white (865, 854, 847, 733) 20 W 75 W

Number of LEDs per module/ECG 6 1 2x3

1) Feed must be in the middle.

For current photometric data as per data sheet and application notes see www.osram.com/products/led-systems/downloads.html

11

High-Flux LED-SystemS – LINEARlight DRAGON®

New: In warm white

Complete module

All figures in mm Individual Board

8,4

2

50 M3

M3

36

300

25,73 20

50

Ø

8

R

2,4

1,

4

100 90,9

36 9,1 109,1

Product- reference

307

Productnumber

LINEARlight-DRAGON® – complete modules LD06-W3-865-L30 LD06-W3-854-L30 LD06-W3-847-L30 LD06-W3-733-L30

4008321180483 4008321180520 4008321180544 4008321180568

white white white warm white

6 6 6 6

24 V 24 V 24 V 24 V

12.0 W 12.0 W 12.0 W 12.0 W

30° 30° 30° 30°

6500 K 5400 K 4700 K 3300 K

6 6 6 6

white white white warm white

6 6 6 6

24 V 24 V 24 V 24 V

12.0 W 12.0 W 12.0 W 12.0 W

120° 120° 120° 120°

6500 K 5400 K 4700 K 3300 K

6 6 6 6

LINEARlight-DRAGON® – individual boards LD06-W3-865 LD06-W3-854 LD06-W3-847 LD06-W3-733

4008321180506 4008321180643 4008321180667 4008321180681

The modules are perfectly matched to OSRAM OPTOTRONIC® 24 V converter Basic dimensions of individual board: I x w x h: 300 mm x 20 mm x 8.5 mm; dimensions of overall module: I x w x h: 307 mm x 36 mm x 25.73 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

LINEARlight-DRAGON® is a flexible system consisting of a metal core board with six high-power Golden DRAGON® LEDs, lens holder and designer heat sink.

• Up to six modules can be connected one after the other with mid-feed with only one OT 75 unit • Integrated 30° optics (for complete module)

Special features • Plug & Play (feeder and connector) thanks to the LD-2X CONNECTsystem • Dimmable by pulse width modulation (PWM)

Applications • Ideal for recessed luminaires • Suitable for wide-area illumination and other general lighting applications

10

LD-2PIN

1,50 500

LD-2CONN-40

40

100

LD-2CONN-100

All figures in mm

Accessories

Productnumber

Cabel crosssection/ AWG

Cable length

CONNECTsystem for LINEARlight-DRAGON® LD-2CONN-100 4008321182883 LD-2CONN-40 4008321182869 LD-2PIN 4008321182845

24 V 24 V 24 V

2A 2 A 2 A

0.13/26 100 0.13/26 40 0.2/24 500

500 500 500

For current technical data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

Decorative lighting in the home with LINEARlight-DRAGON® modules

12

Dragoneye® anD oPtotroniC®

impressive highlights for indoors and outdoors. the innovative golden Dragon® lED is the new generation of miniaturised light sources that outperforms previous lEDs in terms of efficiency and intensity. Dragoneye® brings its many benefits into perfect focus. it puts exhibits and display cabinets in an impressive light, and thanks to its aluminum casing it can also be used outdoors with no problems at all.

DRAGONeye®: elegance in a metal casing.

DRAGONeye® • Mini-spotlight with a single high-power LED and lens • IP65 aluminum casing for optimum heat dissipation • Simple installation thanks to integrated cables and M10 thread

LED systems with OPTOTRONIC® OT 9 DIM

1 series with up to 6 or 9 DRAGONeye® modules

OPTOTRONIC® for 350 mA LED modules • Specially developed for operating high-flux LED modules • Compact, electronically controlled constant current supply unit • Safe operation thanks to electrical isolation between the primary and the secondary side (SELV equivalent) • Can be dimmed with a potentiometer or 1…10 V control signal • Casing with cable clamp

OPTOTRONIC® OT 9/200-240/350 DIM

Technical data Product reference DE1 DRAGONeye® OPTOTRONIC® OT 9/200-240/350 DIM

Current 350 mA

Dimensions (ø/H) ø: 23 mm H: 33 mm 80 x 40 x 22 mm

Output (available colours) 1.1 W (white, green, blue) 0.8 W (red, yellow) 8.5 W

Number of LEDs per module/ECG 1 Up to 6 DRAGONeyes for blue, green, white Up to 9 DRAGONeyes for red, yellow

For current photometric data as per data sheet and application notes see www.osram.com/products/led-systems/downloads.html

13

High-Flux LED-Systems – Dragoneye® 33

23

12

M 10 20

Product- reference

All figures in mm

Productnumber

DRAGONeye® DE1-W3-854 DE1-W3-733 DE1-A2 DE1-Y2 DE1-T2 DE1-B2

4008321909725 4008321909718 4008321909732 4008321909756 4008321909763 4008321909749

white warm white red yellow green blue

1 1 1 1 1 1

350 mA 350 mA 350 mA 350 mA 350 mA 350 mA

1.2 W 1.2 W 0.8 W 0.8 W 1.2 W 1.2 W

15° 15° 18° 18° 15° 15°

5400 K 3300 K – – – –

– – 617 nm 587 nm 525 nm 465 nm

44 x 6 44 x 6 44 x 6 44 x 6 44 x 6 44 x 6

The modules are perfectly matched to OSRAM OPTOTRONIC® 350 mA converter Dimensions: Ø 23 mm, h: 33 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

DRAGONeye® is an IP65 compact mini light with 1 high-flux Golden DRAGON® LED.

DRAGONeye® for trade fairs

Subtle object lighting in the shop or shop window – DRAGONeye® LED systems focus attention.

14

Special features • Narrow beam angle for use as a spot source • Metal package for optimum heat removal • Two-core connecting cable 200 mm with open cable ends • Integrated M10 thread for simple installation • Type of protection IP65 to DIN EN 60529 • The modules can only be connected in series Applications • As a small luminaire head in single LED luminaires • For accent, orientation or route lighting

DRAGONeye® – ideal for object lighting, for example in museums

10

12,1

High-Flux LED-Systems – DRAGONpuck®

35,2

Product- reference

M3

All figures in mm

Productnumber

DRAGONpuck® DP3-W2/W2B-865 DP3-W3-865 DP3-W2/W2B-854 DP3-W3-854 DP3-W2/W2B-847 DP3-W3-847 DP3-W3-733 DP3-A1 DP3-A2 DP3-Y1 DP3-T2 DP3-V1 DP3-B1 DP3-B2

4008321033406 4008321909848 4008321033383 4008321909824 4008321033369 4008321909831 4008321909930 4008321033185 4008321149534 4008321033420 4008321149510 4008321033345 4008321033208 4008321149473

white white white white white white warm white red red yellow green green blue blue

3 3 3 3 3 3 3 3 3 3 3 3 3 3

350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA

3.6 W 3.6 W 3.6 W 3.6 W 3.6 W 3.6 W 3.6 W 2.4 W 2.4 W 2.4 W 3.6 W 3.6 W 3.6 W 3.6 W

20° 20° 20° 20° 20° 20° 20° 16° 16° 16° 16° 16° 16° 16°

6500 K 6500 K 5400 K 5400 K 4700 K 4700 K 3300 K – – – – – – –

– – – – – – – 617 nm 617 nm 587 nm 525 nm 505 nm 470 nm 470 nm

16 16 16 16 16 16 16 16 16 16 16 16 16 16

The modules are perfectly matched to OSRAM OPTOTRONIC® 350 mA converter Dimensions: Ø 35.2 mm, h: 12.1 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

DRAGONpuck® is a compact high-intensity LED light source with 3 high-flux Golden DRAGON® LEDs and an efficient optical system.

Special features • Very low profile, same diameter as QR CBC lamps • Narrow beam angle for use as a spot source • M3 screw fixing • Two-core connecting cable 200 mm with open cable ends • Light source with long life Applications • Reading lights • Accent lighting • Light source for furniture luminaires • For orientation lights • Spot light source

Light mast on the approaches to the AOL Arena in Hamburg. DRAGONpuck® is used in the top part of the mast to guide the way. (Source: SITECO)

DRAGONpuck® can be applied to reading light applications

15

High-Flux LED-Systems – DRAGONtape® 0

25 +

Tc

0

–

+

Tc

0

–

+

25

Tc

0

–

Tc

+

0

–

+

Tc

0

–

+

Tc

–

154

2,5 All figures in mm

Product- reference

Productnumber

DRAGONtape® DT6-W2/W2B-865 DT6-W3-865 DT6-W2/W2B-854 DT6-W3-854 DT6-W2/W2B-847 DT6-W3-847 DT6-W3-733 DT6-A1 DT6-A2 DT6-Y1 DT6-T2 DT6-V1 DT6-B1 DT6-B2

4008321015822 4008321909817 4008321015808 4008321909794 4008321015846 4008321909800 4008321909923 4008321015747 4008321150141 4008321015860 4008321150189 4008321015785 4008321015761 4008321150127

white white white white white white warm white red red yellow green green blue blue

6 6 6 6 6 6 6 6 6 6 6 6 6 6

350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA

7.2 W 7.2 W 7.2 W 7.2 W 7.2 W 7.2 W 7.2 W 4.8 W 4.8 W 4.8 W 7.2 W 7.2 W 7.2 W 7.2 W

120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120°

6500 K 6500 K 5400 K 5400 K 4700 K 4700 K 3300 K – – – – – – –

– – – – – – – 617 nm 617 nm 587 nm 525 nm 505 nm 470 nm 470 nm

25 25 25 25 25 25 25 25 25 25 25 25 25 25

The modules are perfectly matched to OSRAM OPTOTRONIC® 350 mA converter Dimensions: I x w x h: 154 mm x 25 mm x 2.5 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

DRAGONtape® modules consist of six high-flux Golden DRAGON® LEDs in series on flexible splittable boards.

• Contact is made by soldering two wires on the selected unit

Special features • Self-adhesive backing for simple installation • Can be divided into units of 1 to 6 LEDs • Optics which reduce the beam angle from 120° to 10°, 30° or 14 x 22° can be used as accessories • Optics are positioned over the LED and screwed in place

Applications • Ideal for the development of prototype luminaires and LED solutions • For orientation lights • For shop and furniture lights and small signal lights • Effect lighting and industrial applications

9

22

2,90 ± 0,1

25

32 16

25

15,5

All figures in mm

Accessories

Productnumber

DRAGONtape® Optics OP1x1-10 OP1x1-30 OP1x1-14x22

4008321909893 4008321909770 4008321909787

10° 30° 14°x22°

150 150 150

For current technical data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

Freezer cabinets lit with DRAGONtape® in a Migros store in the historic town center of Zurich, Switzerland

16

High-Flux LED-SystemS – DRAGON-X ø3

DRAGON X® L60

DRAGON X® L30

DRAGON X® L12

23

8,4

3,6

18

14,4

10

7

20

1,7

14,6

10,1

All figures in mm

Product- reference

Productnumber

DRAGON-X DX1-W3-865-L12W DX1-W3-865-L30W DX1-W3-865-L60W DX1-W3-865-W DX1-W3-854-L12W DX1-W3-854-L30W DX1-W3-854-L60W DX1-W3-854-W DX1-W3-733-L12W DX1-W3-733-L30W DX1-W3-733-L60W DX1-W3-733-W DX1-A2-L12W DX1-A2-L30W DX1-A2-L60W DX1-A2-W DX1-Y2-L12W DX1-Y2-L30W DX1-Y2-L60W DX1-Y2-W DX1-T2-L12W DX1-T2-L30W DX1-T2-L60W DX1-T2-W DX1-B2-L12W DX1-B2-L30W DX1-B2-L60W DX1-B2-W

4008321171450 4008321171474 4008321171498 4008321171511 4008321171535 4008321171559 4008321171573 4008321171597 4008321171610 4008321171634 4008321171658 4008321171672 4008321171696 4008321171740 4008321171764 4008321171788 4008321171801 4008321171825 4008321171849 4008321171887 4008321171986 4008321172006 4008321172020 4008321172044 4008321171900 4008321171924 4008321171948 4008321171962

white white white white white white white white white white white white red red red red yellow yellow yellow yellow green green green green blue blue blue blue

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA 350 mA

1.2 W 1.2 W 1.2 W 1.2 W 1.2 W 1.2 W 1.2 W 1.2 W 1.2 W 1.2 W 1.2 W 1.2 W 0.8 W 0.8 W 0.8 W 0.8 W 0.8 W 0.8 W 0.8 W 0.8 W 1.2 W 1.2 W 1.2 W 1.2 W 1.2 W 1.2 W 1.2 W 1.2 W

12° 30° 60° 120° 12° 30° 60° 120° 12° 30° 60° 120° 12° 30° 60° 120° 12° 30° 60° 120° 12° 30° 60° 120° 12° 30° 60° 120°

6500 K 6500 K 6500 K 6500 K 5400 K 5400 K 5400 K 5400 K 3300 K 3300 K 3300 K 3300 K – – – – – – – – – – – – – – – –

– – – – – – – – – – – – 616 nm 616 nm 616 nm 616 nm 589 nm 589 nm 589 nm 589 nm 525 nm 525 nm 525 nm 525 nm 468 nm 468 nm 468 nm 468 nm

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

The modules are perfectly matched to OSRAM OPTOTRONIC® 350 mA converter Dimensions: I x w : 20 mm x 23 mm; h (basic version): 3.5 mm; h (Version L12): 8.4 mm; h (Version L30): 10.5 mm; h (Version L60): 14.6 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

The DRAGON-X module is equipped with a high-flux GOLDEN DRAGON® LED on a hexagonal metal core board.

Special features • A vailable with different integrated optics 12° (L12), 30° (L30) and 60° (L60) or without optics (120°) • W ith 20 cm long connecting cable • Optimum heat dissipation for instant use • Universal applications Applications • For portable and compact luminaires • For use in architectural, shop and interior luminaires • Safety lighting and signal lights Starlight ceiling with Golden DRAGON® LEDs in a puppet theater in Zagreb, Croatia (photo: Boris Cvjetanovic)

17

linEarlight

Form follows function. Colours follow your vision. light enhances the three-dimensional aspect of rooms and directs attention to attractive details. Effect lighting in bars and restaurants for example is ideal for drawing people in. mundane halls can be converted into inviting settings for glamorous receptions. long corridors and stairwells can be turned into glamorous catwalks of daily life.

Designing light – with creativity and individual freedom.

OSRAM supports creative interior design with LEDs on rigid or flexible printed circuit boards that are ideal for contour lighting, injecting light into transparent materials, backlighting or signage. They are so versatile they can be adapted to any scale. Perfectly matched OPTOTRONIC® power supplies and controls from OSRAM ensure optimum functionality.

Source: EOS

Source: EOS

18

LINEARlight • 45 cm long rigid module, can be split every 5.6 cm • Optional CONNECTsystem for simple connection without any tools • Optional LINEARlight optics for mounting on the module to provide directional light • Available in different colours

LINEARlight POWER Flex • Compact light source with even greater output • Can be operated perfectly with just one ECG • Flexible circuit board with self-adhesive backing • Overall module length 2.8 m with 120 LEDs, can be split into units of 14 cm, each with 6 LEDs

LINEARlight Flex® • Flexible circuit board with self-adhesive backing • Versions available that emit light at the top or side (e. g. for “corona” effect) • Can be split into units of 14 cm each with 10 LEDs (LM10A top emitter) and 5.6 cm each with 4 LEDs (LM11A side emitter) • Up to 8.4 m of light (4.2 m of light with LM11A) with just one ECG • Wide beam angle of 120° • Available in different colours

OPTOTRONIC® • Optimum operation for 10 V and 24 V LED modules • Compact, functional design with cable clamp • Parallel connection of multiple LED modules • Safe operation thanks to electrical isolation between the primary and the secondary side (SELV equivalent) • Secondary lines up to 10 m long possible • Reversible protection mechanisms for short-circuit, overtemperature and overload

HigH-Flux lED-SyStEmS – linEarlight PowEr Flex

nEw: in warm wHitE

3 23 10 140 2800 All figures in mm

Productreference

Productnumber

LINEARlight POWER Flex – TOPLED LM10P-W3-865 LM10P-W3-854 LM10P-W3-847 LM10P-W3-733 LM10P-W3-727

4008321914316 4008321914293 4008321914279 4008321173126 4008321186195

white white white warm white warm white

120 120 120 120 120

24 V 24 V 24 V 24 V 24 V

72 W 72 W 72 W 72 W 72 W

120° 120° 120° 120° 120°

6500 K 5400 K 4700 K 3300 K 2700 K

8 8 8 8 8

The modules are perfectly matched to OSRAM OPTOTRONIC® 24 V converter Basic dimensions for overall module: I x w x h: 2800 mm x 10 mm x 3 mm; dimensions of smallest unit: I x w x h: 140 mm x 10 mm x 3 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

500

LM-2PIN Flex

10

34,5

LM-CONN Flex

16,5

16,5

All figures in mm

Accessories

number

1)

1)

Cabel crosssection/ AWG

Cable length

CONNECTsystem for Flex modules LM-2PIN Flex Feeder LM-CONN Flex Connector

4008321916211

24 V

2A

0.35/26 500

100

4008321916259

24 V

2A

0.35/26 10

200

For current technical data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

LINEARlight POWER Flex is a compact and powerful light source for use in general lighting.

Special features • Can be divided into units of 6 LEDs or multiples thereof with no loss of function for the parts • Can be connected to the front of the module or at the division points • Flexible board with self-adhesive backing • Dimmable by pulse width modulation (PWM) • Small height for low-profile lighting solutions Applications • Ideal for lighting counters, arches or handrails and also for edge lighting • For illuminating or backlighting transparent or diffuse materials

Linearlight POWEr Flex illuminates this stairwell in Candé, France

19

LINEARlight Flex®

New: In warm white

3 10 140

LM10A

8400 4,2 10

56

Product- reference

4200

LM11A

All figures in mm

Productnumber

LINEARlight Flex® TopLED LM10A-W1-865 LM10A-W2-865 LM10A-W1-854 LM10A-W2-854 LM10A-W1-847 LM10A-W2-847 LM10A-W3-865 LM10A-W3-854 LM10A-W3-847 LM10A-W3-733 LM10A-W3-727 LM10A-A1 LM10A-Y1 LM10A-T2 LM10A-B1

4050300873817 4050300887265 4050300817170 4050300887289 4050300817156 4008321040145 4008321168955 4008321168931 4008321168917 4008321186157 4008321186171 4008321040060 4050300946030 4008321168832 4050300945491

white 600 white 600 white 600 white 600 white 600 white 600 white 600 white 600 white 600 warm white 600 warm white 600 red 600 yellow 600 green 600 blue 600

24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V

57.6 W 86.4 W 57.6 W 86.4 W 57.6 W 86.4 W 86.4 W 86.4 W 86.4 W 86.4 W 86.4 W 72.0 W 72.0 W 72.0 W 72.0 W

120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120°

6500 K 6500 K 5400 K 5400 K 4700 K 4700 K 6500 K 5400 K 4700 K 3300 K 2700 K – – – –

– – – – – – – – – – – 617 nm 587 nm 525 nm 469 nm

8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

white white white red yellow green blue

10 V 10 V 10 V 10 V 10 V 10 V 10 V

30 W 30 W 30 W 15 W 22.5 W 30 W 30 W

120° 120° 120° 120° 120° 120° 120°

6500 K 5400 K 4700 K – – – –

– – – 615 nm 587 nm 528 nm 470 nm

8 8 8 8 8 8 8

LINEARlight Flex® SideLED LM11A-W1-865 LM11A-W1-854 LM11A-W1-847 LM11A-A LM11A-Y1 LM11A-T LM11A-B

4050300817194 4050300873879 4050300817217 4008321086952 4050300946016 4008321086990 4008321086976

300 300 300 300 300 300 300

The modules are perfectly matched to OSRAM OPTOTRONIC® 24 V (LM10A) or 10V (LM11A) converter LM10A – Top LED – Basic dimensions for overall module: I x w x h 8400 mm x 10 mm x 3 mm; basic dimensions of smallest unit with 10 LEDs: I x w x h 1400 mm x 10 mm x 3 mm LM11A – Side LED – Basic dimensions for overall module: I x w x h 4200 mm x 10 mm x 3 mm; basic dimensions of smallest unit with 4 LEDs: I x w x h 56 mm x 10 mm x 3 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

LINEARlight Flex® is an LED module on a flexible pc board with light emitted either at the top (LM10A) or at the side (LM11A).

The lights go on in Dortmund: the characteristic outline of the Westfalen stadium is highlighted by red LINEARlight Flex® modules.

20

Special features • Low height for low-profile surface/enclosed mounting • Connection with optional CONNECTsystem (see page 14) • Low thermal output • Flexible 3-D mounting possible • Flexible board with double-sided adhesive tape for simple mounting • LINEARlight W2 as a long-life solution with more than twice the luminous flux compared with W1 and with a life of up to 50,000 hours • Can be divided into the smallest unit or multiples thereof without affecting the function of the remainder of the board Applications • Injection of light in displays and low-profile light guides • S ignage, advertising or display cabinet lighting • M arker lights for walkways and outlines (e.g. escape routes, edges and steps) • B acklighting of complex contours

LINEARlight

New: In warm white

4 448 10 56

All figures in mm

Product- reference

Productnumber

LINEARlight LM01A-W1-865 LM01A-W2-865 LM01A-W3-865 LM01A-W1-854 LM01A-W2-854 LM01A-W3-854 LM01A-W1-847 LM01A-W2-847 LM01A-W3-847 LM01A-W3-733 LM01A-S1 LM01A-A1 LM01A-O1 LM01A-Y1 LM01A-T2 LM01A-B1

4008321015945 4050300887043 4008321186058 4008321015921 4050300887081 4008321186072 4008321015907 4008321015983 4008321186096 4008321186119 4050300888002 4050300887128 4050300888040 4008321015969 4050300887845 4050300888088

white white white white white white white white white warm white super red red orange yellow green blue

32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32

10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V

3.2 W 4.0 W 4.0 W 3.2 W 4.0 W 4.0 W 3.2 W 3.2 W 3.2 W 3.2 W 4.0 W 4.0 W 4.0 W 4.0 W 4.0 W 4.0 W

120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120°

6500 K 6500 K 6500 K 5400 K 5400 K 5400 K 4700 K 4700 K 4700 K 3300 K – – – – – –

– – – – – – – – – – 633 nm 617 nm 606 nm 587 nm 525 nm 469 nm

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

The modules are perfectly matched to OSRAM OPTOTRONIC® 10 V converter Basic dimensions for overall module: I x w x h: 448 mm x 10 mm x 4 mm; dimensions of smallest unit with 4 LEDs: I x w x h: 56 mm x 10 mm x 4 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

6,10 5,00

500,00

LM-2PIN 13,60

LM-2CONN

6,10

4,65

11,20

48,00

LM-2CONN-50

All figures in mm

Accessories

Productnumber

Accessories

LINEARlight Optics OP 4x1-20

4008321908704

Productnumber

Cabel crosssection/ AWG

Cable length

CONNECTsystem for LINEARlight 20°/white 25°

80

For current technical data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

The LINEARlight modules are suitable for general use and can be adapted to your needs with a high degree of flexibility.

Special features • L ow thermal output • L ow height for low-profile surface/enclosed mounting • C an be extended at will up to 3 modules, colors can be combined • LINEARlight W2 as a long-life solution with twice the luminous flux compared with W1 and with a life of up to 50,000 hours • E xpandable with optional accessories

LM-2PIN 4008321908629 Feeder LM-2CONN 4008321908643 Connector LM-2CONN-50 4008321908667 Flexible Connector

11

2

0.35/22 500

500

11

2

–

500

11

2

0.35/22 50

–

500

For current technical data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

• Optics matched to the smallest unit • M odule can be divided into small units without affecting the function of the remainder of the board Applications • Injection of light in low-profile light guides and displays • Linear structures in display cabinets and furniture • Marker lights for walkways and outlines (e.g. escape routes, edges and steps)

21

linEarlight anD oPtotroniC® Small LED systems with OPTOTRONIC® OT 12

Perfect LED systems for a wide range of applications.

1 row with up to 3 LINEARlight modules

OPTOTRONIC® OT 12/230-240/10

Systems comprising rigid LINEARlight or LINEARlight Colormix modules and OPTOTRONIC® power supply are further enhanced by a comprehensive range of accessories. The CONNECTsystem provides simple connection of the modules with feeders and connectors. Moreover, the additional LINEARlight Optics reduce the beam angle of the LINEARlight module from 120° to 20° or 26°.

Extended LED systems with OPTOTRONIC® OT 50

Extended LED systems with OPTOTRONIC® OT 75

1 LINEARlight Flex® module (LM10A) e. g. up to 4 rows, each with up to 3 LINEARlight modules OPTOTRONIC® OT 50/220-240/10

OPTOTRONIC® OT 75/220-240/24

or 1 LINEARlight POWER Flex module

or 1 LINEARlight Flex® module (LM11A)

No limit on expansion on the primary side

No limit on expansion on the primary side

Technical data Product reference LM01A LINEARlight

Voltage 10 V

Dimensions (L/W/H) 450 x 10 x 4 mm

LM11A LINEARlight Flex® Side emitter LM10A LINEARlight Flex® 1) Top emitter LM10P LINEARlight POWER Flex OPTOTRONIC® OT 12/230-240/10 OPTOTRONIC® OT 50/220-240/10

10 V

4200 x 10 x 4.2 mm

24 V

8400 x 10 x 3 mm

24 V 10 V 10 V

2800 x 10 x 3 mm 109 x 50 x 35 mm 220 x 47 x 44 mm

OPTOTRONIC® OT 75/220-240/24

24 V

220 x 47 x 44 mm

Output (available colours) Number of LEDs per module/ECG 3.2 W (white W1); 4.0 W (white W2) 32 4.0 W (super red, red, yellow, green, blue) 30.0 W (white W1, green, blue) 300 22.5 W (yellow); 15.0 W (red) 57.6 W (white W1); 86.4 W (white W2) 600 72.0 W (red, yellow, green, blue) 72.0 W (white W3) 120 12 W Up to 3 LM01A modules 50 W Up to 12 or 15 modules 2) LM01A or up to 2 modules 2) LM11A 75 W 1 LM10A module or 1 LM10P module

1) Feed must be in the middle 2) Colour-dependent For current photometric data as per data sheet and application notes see www.osram.com/products/led-systems/downloads.html

22

linEarlight Colormix anD EaSy Color Control

let the games of colours begin. they are small, they are brilliant and they generate very little heat. lEDs are therefore ideal for all challenging applications involving dynamic coloured lighting. with linEarlight Colormix modules and the flexible EaSy Color Control lighting management system, it is possible to create enchanting rgB+w effects that leave conventional light sources firmly in the shade.

Creating a sensation with dynamic compositions.

LINEARlight Colormix • 45 cm long rigid module, can be split into units of 15 cm • Each module consists of 30 LEDs, each with three coloured chips in one package • Optional CONNECTsystem for simple connection without any tools

LINEARlight Colormix Flex • 4.0 m long flexible circuit board with selfadhesive backing • Each module consists of 200 LEDs each with three coloured chips in one package • Complete module with 200 LEDs, can be split into units of 20 cm, each with 10 LEDs

EASY Color Control (lighting management system) • Simple, functional and flexible • OPTOTRONIC® OT EASY 60 control unit for direct connection of LED modules (up to 4 channels, e.g. RGB+W) • RGB+W control unit; can be configured via IR remote control, pushbutton coupler or software • Independent sequencer mode possible without a PC • Up to 16 OPTOTRONIC® OT EASY 60 units can be synchronised • Freely configurable RGB+W sequences from up to 16 lighting scenes with individual hold and cross-fade times • DALI® EASY II control unit for controlling other light sources, such as fluorescent lamps and halogen lamps

23

LINEARlight Colormix Flex 3,65 150 11,5

All figures in mm

Product- reference

Productnumber

LINEARlight Colormix Flex LM10L-RGB2-B7 LM10L-RGB2-B8 LM10L-RGB-B7 LM10L-RGB-B8

4008321169402 4008321169426 4008321008824 4008321008886

red/green/blue red/green/blue red/green/blue red/green/blue

200 200 200 200

24 V 24 V 24 V 24 V

57.6 W 57.6 W 50.5 W 50.5 W

120° 120° 120° 120°

625/525/467 nm 625/525/472 nm 625/525/467 nm 625/525/472 nm

8 8 8 8

The modules are perfectly matched to OSRAM OPTOTRONIC® 24 V converter Basic dimensions for overall module: I x w x h: 4000 mm x 11.5 mm x 2.4 mm; dimensions of smallest unit with 10 LEDs: I x w x h 200 mm x 11.5 mm x 2.4 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

Applications • For lighting solutions with changing colors in linear structures • For injecting light into transparent and dispersing materials • Effect lighting in architecture • Dynamic effects in public zones • Enables color mixing with no annoying wandering of the light points

Effective lighting at a night club in Italy

24

500

LM-4PIN Flex

34,5

Special features • Toolless connection with the optional CONNECTsystem • Can be divided into units of 10 LEDs or multiples thereof with no loss of function for the parts • 3-color chips (red, green, blue) in one package

LM-CONN Flex

10

LINEARlight Colormix Flex on flexible board material is ideal for dynamic color applications.

16,5

Accessories

16,5

Product-

Cabel crosssection/ AWG

number

Cable length

CONNECTsystem for LINEARlight Colormix Flex LM-4PIN Flex 4008321916211 Feeder LM-CONN Flex 4008321916259 Connector

24 V

2 A

0.35/26 500

100

24 V

2 A

0.35/26 10

200

For current technicall data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

Color sequencing on steps at the Playmobil Fun Park

LINEARlight Colormix

All figures in mm

Product- reference

Productnumber

LINEARlight Colormix LM01M-RGB-B7 LM01M-RGB-B8

4050300820783 4050300820897

red/green/blue 30 red/green/blue 30

24 V 24 V

8.3 W 8.3 W

120° 120°

617/525/467 nm 617/525/467 nm

10 10

The modules are perfectly matched to OSRAM OPTOTRONIC® 24 V converter Basic dimensions for overall module: I x w x h 450 mm x 11.5 mm x 3.65 mm; basic dimensions of smallest unit with 10 LEDs: I x w x h 150 mm x 11.5 mm x 3.65 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

OSRAM MULTILED® units each with 3 colored chips (red, green and blue) in a housing are used in the LINEARlight Colormix modules.

50

6,2

11,0 8,95

7,3

12,5

0,45

0,45 45

7,3

6,2

7,3

Product- reference

Productnumber

Cabel crosssection/ AWG

Cable length

CONNECTsystem for LINEARlight Colormix LM-4PIN 4008321908681 Feeder LM-4CONN-45 4008321116277 RGB Connector OT-RGB 4008321185112 Switch Plate

25

3

0.35/22 500

500

25

3

0.35/22 45

1000

24

-

-

-

-

For current technical data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

Special features • Enables color mixing with no annoying wandering of the light points • Low thermal output • Rigid module, can be divided into small units without affecting the function of the remainder of the board • Toolless connection with the optional CONNECTsystem with connector and feeder Applications • For lighting solutions with changing colors in linear structures • F or injecting light into transparent and dispersing materials • E ffect lighting in architecture • D ynamic light as an architectural effect in public zones

Trade fair stand for Rosenthal china

25

linEarlight Colormix anD EaSy Color Control

Perfectly matched to your requirements.

Do you want light precisely where it is needed? Do you want lighting that accurately and automatically adapts to current needs? or colour changes that attract attention and create a pleasant atmosphere?

Effect lighting, daylight-dependent control, static lighting scenes: lighting management systems from oSram can easily handle all these tasks – while clearly optimising operating efficiency.

Lighting control of the highest level: with EASY Color Control.

OPTOTRONIC® OT EASY 60 can be configured via PC software so that up to 4 x 16 lighting scenes with individual hold and cross-fade times can be programmed. The user interface has been designed for maximum clarity with self-explanatory displays.

A pushbutton coupler enables conventional pushbutton series to be connected for operating scenes, controlling the central switching and fading functions and selecting any of four configured sequences.

Source: EOS

It is also possible to integrate fluorescent lamps, for example with the DALI® EASY II control unit. DALI® EASY II has a DALI® interface that opens up further options for combining with conventional DALI®-controlled luminaires.

Software PC KIT EASY Color Control • Software for configuring OPTOTRONIC® OT EASY 60 or DALI® EASY II • Clear graphical user interface for configuring sequences or static lighting scenes with preview function • With USB adapter cable and detailed manual • System requirements: Windows 2000/XP, USB port Pushbutton coupler • Pushbutton coupler for connecting to OPTOTRONIC® OT EASY 60 or DALI® EASY II • Enables conventional pushbutton series to be connected for operating scenes and controlling the switching and fading functions • Starting/stopping the sequencer • Motion sensors or timer switches can be connected

26

Simple and practical: lighting control with EASY Color Control.

With the OPTOTRONIC® OT EASY 60, there is no need for an additional power supply or a control. With an IR remote control, up to four colour scenes per unit and the sequence speed can be easily configured. The system can be expanded so that up to 50 m of LINEARlight Colormix or up to 64 m of LINEARlight Colormix Flex can be operated.

Possible expansion of up to 16 OPTOTRONIC® OT EASY 60 units

Up to 3 LINEARlight Colormix modules OPTOTRONIC® OT EASY 60/220-240/24 RGB

IR receiver

or 1 LINEARlight Colormix Flex module IR remote control

EASY Color Control System.

OPTOTRONIC® OT EASY 60 • 60 W power supply and configurable LED control unit for static and dynamic lighting applications • Integrated RGB+W sequencer and scene controller • Lighting scenes can be retrieved as sequences or static scenes • Configuration via IR remote control or software (see page 12/13) • Cable clamp for independent installation IR remote control • IR remote control for configuring and operating OPTOTRONIC® OT EASY 60 and DALI® EASY II • Self-explanatory arrangement of controls for sequencing speed and central dimming function, 4 scenes, start/stop • Configuration function can be disabled IR receiver • Infrared receiver for ceiling or luminaire installation for connecting to OPTOTRONIC® OT EASY 60 or DALI® EASY II control units Y connector • Y connector for system expansion with two ready-made RJ11 cables (2 m) • Enables multiple OPTOTRONIC® OT EASY 60 units to be synchronised and EASY Color Control elements (IR receivers, USB adapters for PC and pushbutton couplers) to be connected

Technical data Product reference LM01M LINEARlight Colormix LM10L LINEARlight Colormix Flex OPTOTRONIC® OT EASY 60/220-240/24 RGB

Voltage 24 V 24 V 24 V

Dimensions (L/W/H) 450 x 11.5 x 3.65 mm 4000 x 11.5 x 2.2 mm 220 x 47 x 44 mm

Output (available colours) 1.8 W (red); 3.6 W (green); 2.9 W (blue) 12 W (red); 24 W (green); 19.2 W (blue) 60 W

Number of LEDs per module/ECG 30 200 Up to 7 LM01M modules or 1 LM10L module

For current photometric data as per data sheet and application notes see www.osram.com/products/led-systems/downloads.html

27

EASY Color Control – high-quality lighting management made easy.

EASY Color Control Configuration software

Motion sensor

USB adapter

Up to two EASY pushbutton couplers

Up to eight pushbuttons or switch inputs per EASY pushbutton coupler

Y connector

Up to 16 OPTOTRONIC® OT EASY 60 or DALI® EASY II units can be individually configured and synchronised OPTOTRONIC® OT EASY 60

OPTOTRONIC® OT EASY 60

OPTOTRONIC® OT EASY 60

DALI® EASY II

QTi DALI®

LED modules e. g.

LINEARlight Colormix or LINEARlight Colormix Flex

28

EFFECTlight

28

34,5

70

All figures in mm

Product- reference

Productnumber

EFFECTlight WL01B-A1 WL01B-Y1 WL01B-V1 WL01B-B2

4008321909855 4008321909862 4008321909879 4008321909886

red yellow green blue

10 10 10 10

24 V 24 V 24 V 24 V

1.1 W 1.1 W 1.3 W 1.3 W

4° 4° 4° 4°

617 nm 587 nm 505 nm 469 nm

10 10 10 10

The modules are perfectly matched to OSRAM OPTOTRONIC® 24 V converter Basic dimensions for overall module: I x w x h: 70 mm x 28 mm x 34.5 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

6,10 5,00

500,00

LM-2PIN 13,60

LM-2CONN

6,10

4,65

11,20

48,00

LM-2CONN-50

Accessories

Productnumber

Cabel crosssection/ AWG

Cable length

CONNECTsystem for LINEARlight LM-2PIN 4008321908629 Feeder LM-2CONN 4008321908643 Connector LM-2CONN-50 4008321908667 Flexible Connector

11

2

0.35/22 500

500

11

2

–

500

11

2

0.35/22 50

–

LED system with integrated lens optics for effective lighting.

Special features • W ith power feed, 14 modules can be connected in series • Very low thermal output • Dimmable by pulse width modulation (PWM) • Combines very well with optical elements Applications • Effect lighting in and on buildings • Lighting effects for columns and arches • Strip lighting • Signaling systems • Small spotlights

500

For current technical data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

Effective lighting for an industrial building in Germany (source: RZB GmbH)

A 6 m long light, created with EFFECTlight LED modules, welcomes patients and visitors to the reception area of the hospital in Hallein, Austria.

29

COINlight®

13 11 33 7,5 9,0

Product- reference

2,00 1,00

All figures in mm

Productnumber

COINlight® CM01E-W2-854 CM01E-A1 CM01E-Y1 CM01E-T1 CM01E-B1

4008321040107 4050300857534 4050300947938 4050300947952 4050300947891

white red yellow green blue

9 9 9 9 9

24 V 24 V 24 V 24 V 24 V

1.2 W 1.2 W 1.2 W 1.2 W 1.2 W

120° 120° 120° 120° 120°

5400 K – – – –

– 617 nm 587 nm 525 nm 470 nm

The modules are perfectly matched to OSRAM OPTOTRONIC® 24 V converter Dimensions: Ø 33 mm, H XX mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

Because of their compact dimensions the COINlight® modules are ideal for use in luminaires for walkway marking for example.

Special features • Low height for low-profile enclosed fittings • Connected with screw terminals • Dimmable by pulse width modulation (PWM) Applications • Light source for marker luminaires (e.g. marking walkways and paths) • Recessed wall luminaires • Recessed floor luminaires

NAUTILUS® Miniborne

30

Steps at the Copacabana, Rio de Janeiro

25 25 25 25 25

ILLUMINATED SIGNAGE

Variable all-rounders for intensive advertising.

Robust, powerful and capable of adapting to lettering in any shape, size or colour, the new generation of BACKlight modules casts a new light on illuminated signage. Flexible lettering and precise contours appear brighter and more brilliant than ever before, exerting a fascinating influence.

BACKlight BL02 • Variable luminance thanks to flexible cables • Only 12 mm wide • Quick and simple installation from a roll • One roll comprises two LED chains • The LED chain can be split at any point • Up to 14.4 m of light (= 1 roll) with one ECG • Ideal for backlighting of narrow structures and small letters

OPTOTRONIC® with High IP protection • Equipment for outdoor applications with type of protection IP64 or IP65 (OPTOTRONIC® OT 12 LE IP65 and OPTOTRONIC® OT 50 E IP64) • Output voltage 10 V DC, electronically stabilised, constant DC voltage • Several modules can be connected in parallel within the specified output range • Safe operation thanks to electrical isolation between the primary and the secondary side (SELV equivalent) • Operation at ambient temperatures from -25 °C to +60 °C • Intelligent power matching for LED modules (Smart Power Supply) with OPTOTRONIC® OT 50 E

BACKlight BL04 • Variable luminance thanks to flexible cables • Quick and simple installation from a roll • Ideal for backlighting wide structures and large letters • 4.8 m of light (= 1 roll) with one ECG

Technical data Product reference BL02 S BACKlight

Voltage 10 V

Dimensions 2 x 4.8 m = 9.6 m

BL02 L BACKlight BL04 BACKlight

10 V 10 V

2 x 7.2 m = 14.4 m 2 x 2.4 m = 4.8 m

OPTOTRONIC® OT 12/220-240/10 LE 3) OPTOTRONIC® OT 50/120-277/10 E 3)

10 V 10 V

190 (177) x 20 x 20 mm 241 x 43 = 30 mm

Output (available colours) Number of LEDs per module/ECG 32 W (green, blue) 2 chains, 60 boards each (1 roll) 38 W (white, super red, red, orange, yellow) 38 W (red) 2 chains, 60 boards each (1 roll) 32 W (green, blue) 2 chains, 30 boards each (1 roll) 38 W (white) 12 W 0.25 roll 50 W 1 roll

3) Without cable clamp For current photometric data as per data sheet and application notes see www.osram.com/products/led-systems/downloads.html For the OSRAM online calculation tool LED deSIGNer see www.osram.com/products/led-systems/designtool/login.php

31

BACKlight BL02 36,0 or 41,5 12,0 12,0

Ø4

24,0 4

80 or 120

Product- reference

All figures in mm

Productnumber

BACKlight BL02 BL02S-W2-865 BL02S-W3-865 BL02S-W2-854 BL02S-W3-854 BL02S-S1 BL02S-A2 BL02S-A1 BL02L-A1 BL02S-O1 BL02S-Y2 BL02S-T2 BL02S-B1

4008321083937 4008321168023 4008321084132 4008321168047 4008321083951 4008321174932 4008321083715 4008321084019 4008321083975 4008321084033 4008321084057 4008321084071

white white white white super red red red red orange yellow green blue

240 240 240 240 240 240 240 240 240 240 240 240

10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V

38.0 W 44.0 W 38.0 W 44.0 W 38.0 W 38.0 W 38.0 W 38.0 W 38.0 W 38.0 W 32.0 W 32.0 W

120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120°

6500 K 6500 K 5400 K 5400 K – – – – – – – –

– – – – 633 nm 617 nm 617 nm 617 nm 606 nm 587 nm 525 nm 470 nm

5 5 5 5 5 5 5 5 5 5 5 5

Special features • A role comprises two LED chains consisting of 60 boards each with two LEDs • The flexible cables enable the luminance to be individually adjusted • Installation “off the roll” and simple connection to the control gear reduces installation costs appreciably.

• The small height and wide beam angle enable extremely low-profile lettering to be created with uniform illumination • Split points between the individual boards make it easier to prepare the boards and mount them in lettering

6,25

9,5

9,5

BACKlight BL02 enables any shapes to be uniformly backlit.

Because of its length, these slim LED chains can be installed quickly and easily.

2

The modules are perfectly matched to OSRAM OPTOTRONIC® 10 V converter Dimensions: The maximum overall length for the BL02S version is 2 x 4.8 m = 9.60 m; board spacing: 80 mm The maximum overall length for the BL02L version is 2 x 7.2 m = 14.40 m; board spacing: 120 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

Accessories

Fläche zur Klebebefestigung

Productnumber

BL-T installation aid for BACKlight BL02 and BL04 BL-T

4008321161284

9.5 x 9.5 x 6.25 mm

For current technical data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

• T he boards are coated at the factory to protect them against moisture and condensate • The boards are installed with screws or self-adhesive installation aid BL-T • NEW – BL02S-W3: White light colors now available with an average of 70% greater brightness Applications • I lluminated signs • I deal for mounting in small lettering • B acklighting of complex contours

Internal view of a letter illuminated by BACKlight® LED chains.

32

60

BACKlight BL04 80

24

4

28

,3

36

ø4

Product- reference

All figures in mm

Productnumber

BACKlight BL04 BL04S-W2-865 BL04S-W3-865 BL04S-W2-854 BL04S-W3-854 BL04S-T2 BL04S-B1

4008321907370 4008321168085 4008321907356 4008321168061 4008321907318 4008321907332

white white white white green blue

240 240 240 240 240 240

10 V 10 V 10 V 10 V 10 V 10 V

38 W 44 W 38 W 44 W 32 W 32 W

120° 120° 120° 120° 120° 120°

6500 K 6500 K 5400 K 5400 K – –

– – – – 525 nm 470 nm

5 5 5 5 5 5

The modules are perfectly matched to OSRAM OPTOTRONIC® 10 V converter Basic dimensions for overall module: The maximum overall length is 2 x 2.4 m = 4.8 m For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

• Split points between the individual boards make it easier to prepare the boards and mount them in lettering • The boards are coated at the factory to protect them against moisture and condensate • The boards are installed with screws or self-adhesive installation aid BL-T (available as an accessory – see page 21) • NEW – BL04S-W3: White light colors now available with an average of 70% greater brightness Applications • Illuminated signs • Backlighting of complex contours • Ideal as efficient light sources for medium to large lettering

Illuminated lettering at the Yorkdale Shopping Center in Toronto, Canada, with around 1000 Backlight LED modules and 128 OPTOTRONIC® OT 50E-IP64 units

BACKlight BL04 enables any shapes to be uniformly backlit with high-intensity light. The Backlight modules are extremely robust and, unlike fluorescent lamps for example, do not contain any filaments or glass that can easily be damaged during transit or installation.

Special features • A role comprises two LED chains consisting of 30 boards each with four LEDs • The flexible cables enable the luminance to be individually adjusted • Installation “off the roll” and simple connection to the control gear reduces installation costs appreciably.

• The small height and wide beam angle enable extremely low-profile lettering to be created with uniform illumination

Lighting for a filling station in Denmark with Backlight BL04

33

BACKlight LM03A ø4

30

30

240 – 550 All figures in mm

Product- reference

Productnumber

BACKlight LM03A LM03A-W1-865 LM03A-W2-865 LM03A-W1-854 LM03A-W2-854 LM03A-S1 LM03A-A LM03A-O1 LM03A-Y1 LM03A-T2 LM03A-B1

4050300817231 4050300886886 4050300817255 4050300886909 4050300794990 4050300948638 4050300948645 4050300798868 4008321031174 4050300948669

white white white white superred red orange yellow green blue

32 32 32 32 32 32 32 32 32 32

10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 V

3.2 W 5.0 W 3.2 W 5.0 W 4.0 W 4.0 W 4.0 W 4.0 W 4.0 W 4.0 W

120° 120° 120° 120° 120° 120° 120° 120° 120° 120°

6500 K 6500 K 5400 K 5400 K – – – – – –

– – – – 633 nm 617 nm 606 nm 587 nm 525 nm 470 nm

20 20 20 20 20 20 20 20 20 20

The modules are perfectly matched to OSRAM OPTOTRONIC® 10 V converter Basic dimensions of individual board: (l x w x h): 30 mm x 30 mm x 4 mm; dimensions of overall module: Overall length of the chain depending on the spread of the cables 240 mm to approx. 550 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

Special features • A chain consists of 8 boards each with 4 LEDs, connected with flexible cable • The flexible cables enable the luminance to be individually adjusted • The small height and wide beam angle enable extremely low-profile lettering to be created with uniform illumination • S plit points between the individual boards make it easier to prepare the boards and mount them in lettering • T he boards are coated at the factory to protect them against moisture and condensation • Mounting holes in the board enable it to be installed easily with screws or hardware for boards.

Illuminated lettering on a MITSUBISHI trade fair stand in Japan

34

Applications • Backlighting of dispersing materials in illuminated advertising • F or many applications in general lighting Note: The BACKlight LM03A range will be shipped only until July 2007.

Illuminated lettering in Denmark

DRAGONchain™ 98

98

Modul: Slave-1

Modul: Slave-2 20

98 Modul: Master

Ø4

~100

~100

All figures in mm

Product- reference

Productnumber

DRAGONchain™ DC02A-W3-865

4008321174680

white

36

24 V

51 W

120°

6500 K

10

The modules are perfectly matched to OSRAM OPTOTRONIC® 24 V converter Basic dimensions for overall module: 3.60 m roll, board spacing: 200 mm For current photometric data and important safety, installation and application information see www.osram.com/products/led-systems/downloads.html

DRAGONchain™ is the efficient alternative to white neon for backlighting large lettering and similar structures. The particular advantages over neon are the reduced manufacturing and maintenance costs, long life and small dimensions.

Special features • A module comprises an LED chain consisting of 18 metal core boards each with two OSRAM Golden DRAGON® LEDs • The flexible cables enable the luminance to be individually adjusted

A letter perfectly lit with DRAGONchain™

• I nstallation and simple connection to the control gear reduces installation costs dramatically • T he small height and wide beam angle ensure uniform illumination of the backlit structures • S plit points between the module sections make it easier to prepare the boards and mount them in lettering • T he boards are coated at the factory to protect them against moisture and condensate Applications • Ideal for mounting in large deep lettering • Illuminated advertising and corporate lighting • Backlighting of complex and deep structures

Illuminated signage for Media Markt

35

AQUALED AND AQUALED DRAGON™ – RECESSED FLOOR LIGHT FOR INDOORS AND OUTDOORS

AQUALED DRAGON™

Productreference

All figures in mm

Productnumber

L

D

AQUALED DRAGON™ AQUALED DRAGON WS WHITE (Stainless Finish) AQUALED DRAGON BS BLUE (Stainless Finish) AQUALED DRAGON GS GREEN (Stainless Finish)

4008321179630 4008321179593 4008321179616

White Blue Green

1.5 1.5 1.5

350mA 350mA 350mA

84 84 84

88 88 88

4x1 Bag 4x1 Bag 4x1 Bag

AQUALED DRAGON™ POWER SUPPLIES OT-AQUALED DRAGON DRIVER 220/240

4008321185242

-

8

-

-

-

8x1 Bag

Electrical specifications • Fitting must be connected in series to a 350mA constant current power supply (Refer wiring instruction) • 1.5 watts/fitting • Not recommended for inside pools

AQUALED DRAGON™ Special features • Robust design • 1.5 watt Dragon LED • IP68 Weatherproof • Colours available: White, Blue, Green Finish • 316 Stainless steel cover • Stainless steel fixing screws • Complete with plastic inground housing for easy installation

AQUALED

Productreference

All figures in mm

Productnumber

L

D

AQUALED 47005-70 AQUALED WG WHITE (Granite Finish) 47005-71 AQUALED WC WHITE (Chrome Finish)

4050300160580 4050300160603

White White

0.5 0.5

10 10

84 84

88 88

4x1 4x1

47005-72 AQUALED BG BLUE (Granite Finish) 47005-73 AQUALED BC BLUE (Chrome Finish)

4050300160566 4050300160627

Blue Blue

0.5 0.5

10 10

84 84

88 88

4x1 4x1

AQUALED POWER SUPPLIES OT-6/200-240/10 CE Outdoor OT-12/230-240/10 Indoor OT-50/120-277/10 E Outdoor OT-50/220-240/10 Indoor

4008321113306 4050300609232 4050300861500 4050300817491

-

-

-

-

-

-

Recommended electronic control gear Reference OPTOTRONIC® OT 06 / 100-240 / 10 COS up to 12 AQUALED® white or up to 10 AQUALED® blue Maximum cable length from control gear* 8m

Capacity

OPTOTRONIC® OT 12 / 230-240 / 10

OPTOTRONIC® OT 50 / 230-240 / 10

up to 24 AQUALED® white or up to 20 AQUALED® blue

up to 90 AQUALED® white or up to 85 AQUALED® blue

8m

50m - 1mm2 cable

1 - Not to be mounted inside a saltwater swimming pool or submersed in water as standard ring is die cast aluminium or chrome.

36

OPTOTRONIC® POWER SUPPLIES

The right solution whatever the application.

A marriage made in heaven is one where the couple are perfectly in tune with each other.

It’s the same with LED modules and control gear from OSRAM. To be in a position to produce intelligent systems from a single source and for all applications, OSRAM develops all the components together – and achieves optimum functionality and efficiency.

Table of symbols: Color No. of LEDs per module

Perfect matches::

•

•

•

•

•

•

•

•

•

•

•

•

OT Easy 60

OT 18 DIM3)

OT 9 DIM (200-240V)

• • • • • • •

•

OT 9 DIM (10-24V)

• • • • • • •

• • • •

OTi DALI DIM

• • •

OT RGB Sequencer

• • •

OT RGB wDIM

• • (•) (•) •

• • •

• • • • • •

• • • • • •

• • • • • •

• • • • • •

• • • •

•

•

•

•1) •1) •1) •1) •1) •1) •1) •1) •1) •1) •1) •1) • • • •

• • • •

• • • •

•

•

•

• •

•

•

•

•

Controllers

OT DIM

•

Combined units

OT DALI 25

•

OT 9

• • •

OT 75 E (IP-protected)

• • •

350/700 mA units

OT 75

OT 50 E (IP-protected)

• • •

OT 20 S

OT 50

• • •

OT 20

OT 12 LE (IP-protected)

• • •

OT 8

OT 12

LED-Modules BACKlight BL02 BACKlight BL03 BACKlight BL04 COINlight® COINlight-OSTAR® DRAGONchain™ DRAGONeye® DRAGONtape® DRAGONpuck® DRAGON-X EFFECTlight® LINEARlight LINEARlight Colormix LINEARlight Colormix Flex LINEARlight-DRAGON® LINEARlight Flex® (LM10A) LINEARlight Flex® (LM11A) LINEARlight POWER Flex

OT 6 CE – 10V

OPTOTRONIC® control gear

24 V units

OT 6 CE – 24V

10 V units

•

• • • • • • • • •2) •2) •2) •2) •2) •2) •2) •2) • • • • • • • • • • • • • • • •

1) RGB in combination with controllers – 2) In combination with converter – 3) Supplied with fixed resistor for 500 mA

1)

Voltage in volts

1)

Rated wattage in watts

1)

Beam angle in degrees

1)

Color temperature in K

1)

Wavelength in nm Rated current in milliamps

Cabel crosssection/ AWG

Cable cross-section in mm2/AWG

Cable length

Cable length in mm Length x width x height in mm for lamp Perm. operating voltage, sinusoidal Line frequency Hz Module wattage in watts Temperature range

The System+ Guarantee* from OSRAM: systematic quality from a single source.

Electronic control gear from OSRAM achieves its optimum functionality when operating as a system in conjunction with LED modules from OSRAM because both components are always perfectly matched to one another. We therefore offer an extensive guarantee for ECGs and LED modules from OSRAM.

All the details on the relevant products and systems, registration and the guarantee requirements can be found at: www.osram.com/system-guarantee

Number of control inputs Number of control outputs Type of dimming Standard pack/pcs.

1) All the technical parameters apply to the entire module. In view of the complex manufacturing process for light emitting diodes, the typical values given for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values.

* after registering the system and under certain conditions of use

37

Ø 55

OPTOTRONIC® FOR INDOOR APPLICATIONS

H

B

L

OT 12/230-240/10 • OT 20/230-240/24 - With integrated cable clamp - Suitable for separate installation

OT 50/220-240/10 • OT 75/220-240/24 - With integrated cable clamp - Suitable for separate installation

H

L

OT 8/200-240/24 - in an extremely compact casing for installation in luminaires Product- reference

OT 20/120-240/24 S - the square design is optimized for compact luminaire designs

Productnumber

OPTOTRONIC® control gear for LEDs for indoor applications OT 8/200-240/24 OT 12/230-240/10 OT 20/230-240/24 OT 20/120-240/24 S OT 50/220-240/10 OT 75/220-240/24

4008321040169 4050300609232 4050300618111 4050300662626 4050300817491 4050300817477

24 V-LED module 10 V-LED module 24 V-LED module 24 V-LED module 10 V-LED module 24 V-LED module

180 – 254 207 – 254 207 – 254 108 – 254 198 – 254 198 – 254

50/60 50/60 50/60 50/60 50/60 50/60

8 12 20 20 50 75

–20…+50 –20…+50 –20…+45 –20…+50 –20…+50 –20…+50

80 x 40 x 22 109 x 50 x 35 109 x 50 x 35 60 x 60 x 31 220 x 47 x 44 220 x 47 x 44

The geometrically optimized OPTOTRONIC® series offers solutions for a wide range of applications.

Effective lighting for a beach bar on the Copacabana in Rio de Janeiro, Brazil

38

Special features • Very low power consumption thanks to extremely high efficiency • Small space requirements thanks to compact functional design • Several modules can be connected in parallel within the specified output range • Flexibility for lighting design • Impressive reliability through long life • Wide permissible ambient temperature range • Electrical isolation between the primary side and the secondary side (SELV equivalent) • Long permitted secondary cables • Protection class II luminaires and luminaires with l and qq labels can be operated without the need for additional measures • Protection mechanisms for short-circuits, overtemperature and overloads are implemented in OPTOTRONIC® and not on the LED modules.

• All the units meet the necessary standards for lighting technology; it is therefore easy for them to be integrated in luminaires

OPTOTRONIC® for outdoor applications OT 6/100-120/10 CE • OT 6/100-120/24 CE OT 6/200-240/10 CE • OT 6/200-240/24 CE OT 12/220-240/10 LE

H

L

Because of their compact housing these units are ideal for installation in very tight spaces. The geometry of the OPTOTRONIC® OT 6 is perfectly matched for installation in flush-type boxes. Both units have a secondary-side connecting cable with a length of 18.5 cm.

B

OT 50 E und OT 75 E

B

H 8,5

173

24

8,5

L

Product- reference

The units are characterized by high reliability and long life (50000 hours at the maximum permitted Tc temperature only up to 10% failure rate). They can be connected in parallel on the secondary side and feature intelligent power matching for LED systems (Smart Power Supply). Input voltage: 120 – 277 V

Productnumber

OPTOTRONIC® control gear for outdoor applications OT 6/100-120/10 CE OT 6/200-240/10 CE OT 6/100-120/24 CE OT 6/200-240/24 CE OT 12/220-240/10 LE OT 50/120-277/10 E OT 75/120-277/24 E

4008321128911 4008321113306 4008321129130 4008321113269 4008321174253 4050300861500 4050300861487

10 V-LED module 10 V-LED module 24 V-LED module 24 V-LED module 10 V-LED module 10 V-LED module 24 V-LED module

90 – 132 180 – 254 90 – 132 180 – 254 198 – 254 108 – 305 108 – 305

SMART POWER SUPPLY SPS compensates for power fluctuations in the LED modules.

Smart Power Supply ensures that the LED system operates as required at all times and there are no shutdowns or overloads on the control gear.

Administration building of Swiss Re, Switzerland (source:. OSRAM Light Consulting, Munich)

50/60 50/60 50/60 50/60 50/60 50/60 50/60

6 6 6 6 12 50 75

–20…+50 –20…+50 –20…+50 –20…+50 –20…+50 –25…+60 –25…+60

51 x 52 x 22 51 x 52 x 22 51 x 52 x 22 51 x 52 x 22 190 x 20 x 20 241 x 43 x 30 241 x 43 x 30

The outdoor OPTOTRONIC® units are electronic controlled power supply units with type of protection IP64 (OT 50 E and OT 75 E) or IP65 (OT 6 CE and OT 12 LE).

Special features • Units for outdoor use with type of protection IP65 • O utput voltage 10 V DC (OT 50 E) or 24 V DC (OT 75 E): Electronically stabilized, constant dc voltage • S everal modules can be connected in parallel within the specified output range • E lectronically reversible cutout for short-circuits, overloads and overtemperature • E lectrical isolation between the primary side and the secondary side (SELV equivalent) • Low power loss • A ll the units meet the necessary standards for lighting technology: operation (DIN 62384), safety (DIN EN 61347-2-13, UL 1310), radio interference suppression (EN 55015) and immunity (EN 61547).

Only in this way a trouble-free integration of LED modules in lighting systems is possible • Long permitted secondary cables

39

OPTOTRONIC® control components FOR RGB

Dimensions in mm

OT DIM

L

Product number

LED module 4050300943459 10 V

3,5

B

Product reference

H

OPTOTRONIC® control components

10–24

24 V OT RGB 3-Channel DIM Product- reference

Productnumber

OT RGB Sequencer

4050300793108 10 V 4050300792460 10 V

10–24

500288 24 V

1

1

–20...+50

172 x 42 x 20

3 x 20

3

3

–20…+50

172 x 42 x 20

1

3

–20…+50

172 x 42 x 20

–20…+50

155 x 70 x 35

3 x 48 10–24

24 V OT RGB Master Sequencer

164

120

24 V

OPTOTRONIC®

50

3 x 20 3 x 48

10–24

3 x 70

OT DIM 4050300943459 10 V 10 – 24 50 1…10V 1 1 –20...+50 172 x 42 x 20 500289 24 V 3 x 70 –20…+50 155 x 70 x 35 OT RGB Slave Sequencer

24 V 120 1…10V OT RGB 3 Channel DIM 4050300793108 10 V 10 – 24 3 x 20 1…10V 3 3 –20…+50 172 x 42 x 20

24 V 3 x 48 1…10V OT RGB Sequencer OT RGB 3-Channel OT DIM 4008321185280 24 V OT RGB Master Sequencer 24 3 x 70 DIMYes –20…+50 155 x 70 x 35 24 V 24 3 x 70 Yes –20…+50 155 x 70 x 35 OT RGB Slave Sequencer 4008321185303 3-channel 1…10 V controller for ■ For dynamic colour chases on ■ 1-channel 1…10 V dimmer for 10 –■ OT RGB DMX DIM 4008321160829 10 V 24 3 x 20 DMX 1 3 –20…+50 172 x 42 x 20 RGB LED systems dimming and3 xregulating three comfortable dimming 24 V

48 control input on LED of LED4008321611195 systems OTi DALI DIM 10 V 10 – 24 colours

60 systems DALI 1 ■ Via a1 1…10 V–20…+50 172the x 42 x 20

144 speed of the preset colour ■ Three independent 1…10 V ■ Control input isolated 24 V OT RGB Sequencer 4050300792460 10 V 10 – 24 dimming

3 x 20 for individual 1…10V 3 3 172 x 42 x 20 sequence can–20…+50 be controlled circuits according to SELV requirements.

24 V 3 x 48 1…10V ■ Functions of the control input: colour control This guarantees the safety of the10 – 24 OT-POTLED/10 4008321185198 24 V 3 x 70 –20…+50 155 x 70 x 35

entire system (power supply – ® dimming unit – LED systems) OPTOTRONIC DALI combined units OT DALI 25/220-240/24 RGB

4050300829463

24 V

Special features of OPTOTRONIC® controllers The five types cover a very wide range of applications • Standard actuators and also potentiometers and digital signals can beSpecial connected via the 1...10-V interface for features control purposes ■ The three types cover a very wide range of ® • Control via DALIapplications interface by DALI® controllers such ® as DALI EASY■II.Standard All the DALI functions be used and actuators and also can potentiometers • Control via DMXdigital interface, DMX control consoles signalsthrough can be connected via the 1…10 V interfacecan for be control purposesin parallel on two • Multiple LED modules connected terminal pairs■ Multiple LED modules can be connected in parallel ■ Low power loss • Low power loss ■ Operation in ambient temperatures of –20°C to +50°C ■ All the units meet the necessary standards for lighting technology.

■ Only in this way trouble-free integration of LED modules in lighting systems is possible ■ Slim low-profile casing with cable clamp for separate installation

Variable wall system for creati

different moods indoors* 20 20 20 20 20 20 20

< 1.3 V switch-on threshold 1.3–9.8 V sequence rate 5 sec–10 min 3 x 8 DALI 1 –20…+45 167 x 42 x 31 20 > 9.83 (addressable) V hold on current colour ■ Output terminals with • Operation in ambient temperatures of -20°C to +50 °C common + pole • Slim low-profile casing with cable clamp for separate installation • The controllers forboth both1010 V and ■ The controllersare aresuitable suitable for V and 24 V24 V LED systems and can be used universally LED systems andtherefore can therefore be used universally ■ Electronicallyreversible reversible cutout cutout for • Electronically forshort-circuits, short-circuits, overloads and overtemperature andoverloads overheating ■ The used on the secondary sidefor of lighting • All the controllers units meetare the necessary standards the power supplies.

This means they are connected technology; it is therefore easy for them to be integrated between the OPTOTRONIC® power supply and the in luminaires LED systems (see wiring diagram)

■ Output terminals with common + pole

198 – 254 0/50/60

20

* Source: Baierl und Demmelhuber Gmb

18

Light as an interior design element: the colors can be changed to create specific atmospheres in the room. (Source: Baierl und Demmelhuber GmbH)

40

OPTOTRONIC® control components FOR RGB

Color changing system featuring OPTOTRONIC® control components. ATM area in the foyer of a bank

OPTOTRONIC® DIM • 1-channel 1...10-V dimmer for comfortable dimming of LED modules • Control input isolated according to SELV requirements.

This guarantees the safety of the entire system (power supply – dimming unit – LED systems) OPTOTRONIC® RGB 3 Channel DIM • 3-channel 1...10-V controller for dimming three colors on LED systems • Three independent 1...10-V dimming circuits for individual color control OPTOTRONIC® RGB Sequencer • For dynamic color chases on RGB LED modules • Via 3 x 1...10-V control inputs one of the eight preprogrammed color sequences, the brightness of the LED module and the speed of the selected color sequence can be controlled OT RGB Master/Slave Colour Sequencer • Allows you to change colour at different speeds • Lock into a set colour • Dimming • Can also be controlled by our OT RGB Switch Plate (wall mounted)

OTi DALI DIM • 1-channel DALI-compatible intelligent electronic dimmer • Control via DALI interface by DALI controllers such as DALI EASY II • In combination with DALI EASY II and its master/slave function it is possible to achieve very high secondary outputs • The integrated Touch DIM® function, which can also be used for movement controlled lighting effects in conjunction with Touch DIM® Sensor, opens up further lighting concepts. In combination with a standard switch the dimming level of the LEDs can be set with one-switch operation and the switch-on value can be stored by double-clicking • Full DALI functionality OPTOTRONIC® RGB DMX DIM • 3-channel DMX controller enables LED modules to be dimmed by means of PWM • 3 independent DMX dimming circuits for individual color control • Coding switches are used for addressing OPTOTRONIC® DALI 25/200-240/24 RGB • DALI-addressable converter for color mixing • Integration of LED light in a DALI system • 3x 24 V PWM output signals • Control via DALI controllers such as DALI EASY

41

OPTOTRONIC® EASY

H

L 6,2 4,5

6,2

B

4,5 180

Product- reference

Productnumber

OPTOTRONIC® EASY – OT EASY 60/220-240/24 RGB OT EASY 60/220-240/24 RGB

4008321187796

24 V

198-254

OT EASY 60/220-240/24 RGB is an all-in-one product. It integrates the control gear, controller and dimmer in one unit.

It is operated via the EASY lighting management system, opening up many different possible applications with extremely simple operation and installation.

The control gear supplies a constant output voltage of 24 V and is set up to operate 24 V LED modules. The output power of 60 W is distributed among four channels RGB+W; 60 W is also possible on one channel. The integrated dimmer has 4 x 24 V PWM outputs for RGB+W color mixing. The controller in OT EASY 60/220-240/24 RGB has an individually configurable RGB+W sequencer for stand-alone operation. Color and lighting scenes can be stored and retrieved as either static or dynamic scenes.

50/60

60 W distributed 24 V

4

-20 …+50 220 x 47 x 44

OT EASY 60/220-240/24 RGB can be easily combined with different operating elements.

Colors and lighting scenes can be easily set in conjunction with the EASY IR Sensor and the EASY RMC remote control.

Scenes and colors can also be set with the air of the EASY PUSH BUTTON coupler and conventional pushbutton units from any range. The Windows interface of the EASY Color Control software enables all the functions of the OT EASY 60/220-240/24 to be visualized and interactively used.

With the master/slave function of the OT EASY 60/220240/24 RGB, lighting systems can be expanded quickly and easily. It is therefore no problem at all to provide dynamic LED lighting.

L OT EASY 60/220-240/24 RGB

N

+ R G B W -

LED-MODULE

EASY Signal

Product- reference

Productnumber

Accessories: EASY Color Controller DALI® EASY II Controller EASY RMC remote control EASY IR infrared receiver EASY IR CI infrared receiver for ceiling installation Y connector EASY PB COUPLER EASY PC KIT

Lufthansa Senator Lounge at Terminal 2, Munich airport

42

4008321053046 4008321053152 4008321053138 4008321915573 4050300803142 4008321915597 4008321915559

B

OPTOTRONIC® for high-flux LED modules

H

L

H

• OT 9/10-24/350 DIM is a dimmable electronic control gear which - enables high-flux LEDs to be integrated in DC supply systems (yachts, boats, mobile homes, solar lights, etc.)

- allows OSRAM’s standard range of LEDs to be combined with high-flux modules (e.g. LINEARlight together with DRAGONtape® in one application)

B

L

OPTOTRONIC® electronic control gear specifically for high-flux LED systems For optimum operation of LED modules, control gear is needed that is precisely matched to requirements. We therefore offer a separate OPTOTRONIC® series that has been specially developed for operating high-flux LEDs. The new generation of high-flux LED modules calls for operation at a constant current of 350 mA or 700 mA for example.

Special features • Electronically stabilized constant dc current irrespective of the ambient temperature or fluctuations in the line voltage • Electronically reversible cutout for short-circuits, overloads and overheating • All the units meet the necessary standards for lighting technology. It is therefore easy for them to be integrated in luminaires 350 mA LED-Module The OT 9 family of units are compact electronically controlled constant current power supply units (350 mA) with a maximum output of 9 W. They are therefore suitable for operating 350 mA LED modules.

• OT 9/200-240/350 DIM is an independent dimmable electronic control gear with cable clamp

700 mA LED-Module • OT 35/200-240/700 is a compact electronically controlled constant current power supply unit (700 mA) with a maximum output of 35 W. • The optional mounting kit makes installation easy (LMC CI Box) • OT 18/200-240/700 DIM is an independent compact dimmable control gear for 700 mA high-flux LED modules.

Brightness is regulated via a 1...10-V interface.

Alternatively, the unit enables the operating current to be set by means of a resistor on an application-oriented basis; in other words adjusted according to the thermal conditions.

The operating current of the LEDs can be adjusted from 0 to 700 mA.

6,2

44

4,5

• Because of its extremely small dimensions, OT 9/200-240/350 is ideal for line voltage operation in various applications in which space is at a premium

220

180

Starlight ceiling with Golden DRAGON® LEDs in a puppet theater in Zagreb, Croatia (photo: Boris Cvjetanovic) 4,5

Productnumber

6,2

Product- reference

47

OPTOTRONIC® control gear (constant current) OT 9/200-240/350 OT 9/100-120/350 E OT 9/10-24/350 DIM OT 9/200-240/350 DIM OT 18/200-240/700 DIM1) OT 35/200-240/700

4050300888262 4050300888835 4050300888897 4008321187321 4008321139320 4008321168365

350 mA 350 mA 350 mA 350 mA 700 mA 700 mA

180 – 254 190 – 132 10 – 24 180 – 240 180 – 254 180 – 254

50/60 50/60 50/60 50/60 50/60 50/60

8.5 8.5 8.5 8.5 18.0 35.0

–20…+50 –20…+50 –20…+50 –20…+50 –20…+50 –20…+50

80 x 40 x 22 80 x 40 x 22 80 x 40 x 22 108 x 53 x 33 108 x 53 x 33 190 x 30 x 21

1) supplied with fixed resistor for 500 mA

43

Some things can only be seen with this type of lighting Innovative features that make Hilite a brilliant idea Hilite architectural contour lighting is designed as an energy efficient alternative to conventional fluorescent and neon, with many advantages in terms of cost and efficiency. However, this is certainly no like-for-like replacement.

With illumination by solid state LEDs through coloured acrylic tube, a pure, rich light is evenly emitted without the stark glare of neon or fluorescent tubes and light pollution.

The difference in running costs is even more dramatic as Hilite uses just one fifth the power of neon.

Furthermore, whereas neon lights cannot be switched off during the daylight hours without loss of colour, Hilite provides a colour display whether illuminated or not, therefore offering further substantial energy savings against neon.

…such as an 80% energy saving

The low voltage also makes Hilite safe to touch. It is completely sealed, weatherproof and ideal for interior or exterior applications.

A daisy chain configuration provides fast, easy installation and an innovative clip system allows fitting directly to the structure or attachment to brackets.

Fitting is also made easier by the fact that, in contrast to neon and fluorescent lighting, Hilite tubes are virtually unbreakable. Once fitted almost no maintenance is required for up to 10 years.

Hilite is recyclable and eliminates the need to dispose of broken glass and other hazardous materials.

Hilite is available in a wide range of colours.

44

Special features • Up to 80% reduction in running costs compared to neon • Long life guarantees • Made from tough acrylic • Available in a wide range of colours • Fast, easy installation • Virtually maintenance free • Weatherproof (IP65) • Safe and cool to touch • Soft, environmentally friendly light • Same colour in daylight – on or off • Recyclable

HILITE LED ILLUMINATED ACRYLIC TUBE

Product

Reference

Hilite LED Illuminated Acrylic Tube OS-HL-AS-B- 300mm OS-HL-AS-B- 600mm OS-HL-AS-B-1200mm OS-HL-AS-B-1800mm OS-HL-AS-B-2400mm OS-HL-AS-G- 300mm OS-HL-AS-G- 600mm OS-HL-AS-G-1200mm OS-HL-AS-G-1800mm OS-HL-AS-G-2400mm OS-HL-AS-O- 300mm OS-HL-AS-O- 600mm OS-HL-AS-O-1200mm OS-HL-AS-O-1800mm OS-HL-AS-O-2400mm OS-HL-AS-R- 300mm OS-HL-AS-R- 600mm OS-HL-AS-R-1200mm OS-HL-AS-R-1800mm OS-HL-AS-R-2400mm OS-HL-AS-W- 300mm OS-HL-AS-W- 600mm OS-HL-AS-W-1200mm OS-HL-AS-W-1800mm OS-HL-AS-W-2400mm OS-HL-AS-Y- 300mm OS-HL-AS-Y- 600mm OS-HL-AS-Y-1200mm OS-HL-AS-Y-1800mm OS-HL-AS-Y-2400mm

HILITE 0.3M HILITE 0.6M HILITE 1.2M HILITE 1.8M HILITE 2.4M HILITE 0.3M HILITE 0.6M HILITE 1.2M HILITE 1.8M HILITE 2.4M HILITE 0.3M HILITE 0.6M HILITE 1.2M HILITE 1.8M HILITE 2.4M HILITE 0.3M HILITE 0.6M HILITE 1.2M HILITE 1.8M HILITE 2.4M HILITE 0.3M HILITE 0.6M HILITE 1.2M HILITE 1.8M HILITE 2.4M HILITE 0.3M HILITE 0.6M HILITE 1.2M HILITE 1.8M HILITE 2.4M

blue blue blue blue blue green green green green green orange orange orange orange orange red red red red red white white white white white yellow yellow yellow yellow yellow

300mm 600mm 1200mm 1800mm 2400m 300mm 600mm 1200mm 1800mm 2400mm 300mm 600mm 1200mm 1800mm 2400mm 300mm 600mm 1200mm 1800mm 2400mm 300mm 600mm 1200mm 1800mm 2400mm 300mm 600mm 1200mm 1800mm 2400mm

24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC 24 volt DC

1.6W 3.2W 6.4W 9.6W 12W 1.3W 2.6W 4.5W 7.1W 9W 2.4W 3.5W 5.9W 9.4W 11.8W 1.8W 2.7W 4.5W 7.1W 8.9W 1.8W 3.6W 7.1W 10.7W 13.4W 2.4W 3.6W 6W 9.6W 12W

POWER SUPPLY MAXIMUM OF 7 METRES OF ANY HILITE COLOUR WILL RUN OF 1 OT75W/240/24 VOLT POWER SUPPLY.

45

HILITE RGB COLOURMIX

Product-

reference

L

Hilite RGB Colourmix White tube with RGB LEDs inside white with colour change Hilite RGB Sequencer

customised length 120 x 120 x 100mm

15W per metre 150 W

24 VDC

Hilite accessories OS-CS-S-10 metre OS-CS-S-25 metre OS-JC-S-3 metre OS-JC-S-5 metre OS-JC-S-10 metre

Connection cable from power supply Connection cable from power supply Jumper cable between Hilite tubes Jumper cable between Hilite tubes Jumper cable between Hilite tubes

In nature, colour is rarely constant. It changes and transforms its environment.

The qualities this brings to the natural world are now available in the commercial world. Uniquely through Hilite RGB Colourmix from OSRAM. RGB Colourmix is a revolutionary preprogrammable LED colour changing system. It gives you a palette of 16 million colours to work with. The programmable controller couples to an LED lighting system to provide you with static or dynamic lighting effects.

The effects can be as simple and subtle, or as imaginative and ambitious as you desire. Use RGB Colourmix to complement in-store seasonal designs.

Create mood lighting effects. Fashion stunning interior wash effects. Add

46

10 metres 25 metres 3 metres 5 metres 10 metres

drama to displays. Anything is possible and everything is achievable with Hilite RGB Colourmix from OSRAM.

Special features

For extra versatility, the system is DMX compatible. This means it can be seamlessly integrated into a larger lighting scheme, and also allows lighting effects to synchronise with music. The creative potential and commercial opportunities of light and colour have never been brighter.

• Perfect for subtle moodlighting or dynamic effects

RGB Sequencer Using our OT-RGB sequencer you can create an array of colours. The OT-RGB switch plate also allows remote control over the sequencer for dynamic color controlling and dimming.

• Versatile and programmable • Long maintenance-free life

• Easy-to-use • Brings LED illumination to life

ORDER NUMBERS Product reference

Product number

Light colour

COINlight-OSTAR® C006A-W3-865 C006A-W3-854 C006A-W3-847 C006A-W3-733

4008321187598 4008321187611 4008321189950 4008321187635

4008321180483 4008321180520 4008321180544 4008321180568

4008321180506 4008321180643 4008321180667 4008321180681

Product number

Light colour

DRAGONtape® DT6-W2/W2B-865 DT6-W3-865 DT6-W2/W2B-854 DT6-W3-854 DT6-W2/W2B-847 DT6-W3-847 DT6-W3-733 DT6-A1 DT6-A2 DT6-Y1 DT6-T2 DT6-V1 DT6-B1 DT6-B2

4008321015822 4008321909817 4008321015808 4008321909794 4008321015846 4008321909800 4008321909923 4008321015747 4008321150141 4008321015860 4008321150189 4008321015785 4008321015761 4008321150127

DP3-W2/W2B-865 DP3-W3-865 DP3-W2/W2B-854 DP3-W3-854 DP3-W2/W2B-847 DP3-W3-847 DP3-W3-733 DP3-A1 DP3-A2 DP3-Y1 DP3-T2 DP3-V1 DP3-B1 DP3-B2

white white white white white white warm white red red yellow green green blue blue

OP1x1-10 OP1x1-30 OP1x1-14x22

14

15

DX1-W3-865-L12W DX1-W3-865-L30W DX1-W3-865-L60W DX1-W3-865-W DX1-W3-854-L12W DX1-W3-854-L30W DX1-W3-854-L60W DX1-W3-854-W DX1-W3-733-L12W DX1-W3-733-L30W DX1-W3-733-L60W DX1-W3-733-W DX1-A2-L12W DX1-A2-L30W DX1-A2-L60W DX1-A2-W DX1-Y2-L12W DX1-Y2-L30W DX1-Y2-L60W DX1-Y2-W DX1-T2-L12W DX1-T2-L30W DX1-T2-L60W DX1-T2-W DX1-B2-L12W DX1-B2-L30W DX1-B2-L60W DX1-B2-W

4008321171450 4008321171474 4008321171498 4008321171511 4008321171535 4008321171559 4008321171573 4008321171597 4008321171610 4008321171634 4008321171658 4008321171672 4008321171696 4008321171740 4008321171764 4008321171788 4008321171801 4008321171825 4008321171849 4008321171887 4008321171986 4008321172006 4008321172020 4008321172044 4008321171900 4008321171924 4008321171948 4008321171962

16

4008321914316 4008321914293 4008321914279 4008321173126 4008321186195

17

white white white white white white white white white white white white red red red red yellow yellow yellow yellow green green green green blue blue blue blue

19

white white white warm white warm white

LINEARlight CONNECTsystem for Flex modules LM-2PIN Flex Feeder LM-CONN Flex Connector

16

4008321909893 4008321909770 4008321909787

LINEARlight POWER Flex TOPLED LM10P-W3-865 LM10P-W3-854 LM10P-W3-847 LM10P-W3-733 LM10P-W3-727

Page

white white white white white white warm white red red yellow green green blue blue

DRAGON-X

white warm white red yellow green blue

DRAGONpuck® 4008321033406 4008321909848 4008321033383 4008321909824 4008321033369 4008321909831 4008321909930 4008321033185 4008321149534 4008321033420 4008321a149510 4008321033345 4008321033208 4008321149473

12

white white white warm white

DRAGONeye® 4008321909725 4008321909718 4008321909732 4008321909756 4008321909763 4008321909749

Product reference

DRAGONtape® Optics

LINEARlight-DRAGON – individual boards

DE1-W3-854 DE1-W3-733 DE1-A2 DE1-Y2 DE1-T2 DE1-B2

12

4008321182845 4008321182883 4008321182869 ®

LD06-W3-865 LD06-W3-854 LD06-W3-847 LD06-W3-733

12

white white white warm white

CONNECTsystem for LINEARlight-DRAGON™ LD-2PIN LD-2CONN-100 LD-2CONN-40

10

white white white warm white

LINEARlight-DRAGON™ LD06-W3-865-L30 LD06-W3-854-L30 LD06-W3-847-L30 LD06-W3-733-L30

Page

19

4008321916211 4008321916259

47

ORDER NUMBERS Product reference

Product number

Light colour

LINEARlight Flex速 TopLED LM10A-W1-865 LM10A-W2-865 LM10A-W1-854 LM10A-W2-854 LM10A-W1-847 LM10A-W2-847 LM10A-W3-865 LM10A-W3-854 LM10A-W3-847 LM10A-W3-733 LM10A-W3-727 LM10A-A1 LM10A-Y1 LM10A-T2 LM10A-B1

4050300873817 4050300887265 4050300817170 4050300887289 4050300817156 4008321040145 4008321168955 4008321168931 4008321168917 4008321186164 4008321186171 4008321040060 4050300946030 4008321168832 4050300945491

4050300873879 4050300817217 4050300817194 4008321086952 4050300946016 4008321086990 4008321086976

4008321015945 4050300887043 4008321186058 4008321015921 4050300887081 4008321186072 4008321015907 4008321015983 4008321186096 4008321186133 4008321186119 4050300888002 4050300887128 4050300888040 4008321015969 4050300887845 4050300888088

OP4x1-20

Light colour

CONNECTsystem for LINEARlight Colormix Flex

LM01M-RGB-B7 LM01M-RGB-B8

4050300820783 4050300820897

LM10L-RGB2-B7 LM10L-RGB2-B8 LM10L-RGB-B7 LM10L-RGB-B8

48

4008321169402 4008321169426 4008321008824 4008321008886

red/green/blue red/green/blue red/green/blue red/green/blue

25

25

LM-4PIN Feeder 4008321908681 LM-4CONN-45 RGB Connector 4008321116277 OT-RGB Switch Plate 4008321185112

EFFECTlight 20

WL01B-A1 WL01B-Y1 WL01B-V1 WL01B-B2

4008321909855 4008321909862 4008321909879 4008321909886

21

LM-2PIN Feeder LM-2CONN Connector LM-2CONN-50 Flexible Connector

4008321040107 4050300857534 4050300947938 4050300947952 4050300947891

21

21

4008321083937 4008321084132 4008321168023 4008321168047 4008321083951 4008321084019 4008321083715 4008321083975 4008321084033 4008321084057 4008321084071 4008321161284

24

BL04S-W2-865 BL04S-W2-854 BL04S-W3-865 BL04S-W3-854 BL04S-T2 BL04S-B1 BL-T Installation Aid

4008321907370 4008321907356 4008321168085 4008321168061 4008321907318 4008321907332 4008321161284

30

white red yellow green blue

BACKlight BL02 BL02S-W2-865 BL02S-W2-854 BL02S-W3-865 BL02S-W3-854 BL02S-S1 BL02L-A1 BL02S-A1 BL02S-O1 BL02S-Y2 BL02S-T2 BL02S-B1 BL-T Installation Aid

29

4008321908629 4008321908643 4008321908667

COINlight速 CM01E-W2-854 CM01E-A1 CM01E-Y1 CM01E-T1 CM01E-B1

29

red yellow green blue

CONNECTsystem for LINEARlight and EFFECTlight

4008321908629 4008321908643 4008321908667

LINEARlight Colormix Flex

24

RGB RGB

32

white white white white super red red red orange yellow green blue

BACKlight BL04 LM-2PIN Feeder LM-2CONN Connector LM-2CONN-50 Flexible Connector

Page

4008321916211 4008321916259

CONNECTsystem for LINEARlight Colormix

4008321908704

CONNECTsystem for LINEARlight and EFFECTlight

Product number

LINEARlight Colormix

white white white white white white white white white white warm white super red red orange yellow green blue

LINEARlight Optics

Product reference

LM-4PIN Flex Feeder LM-CONN Flex Connector

white white white red yellow green blue

LINEARlight LM01A-W1-865 LM01A-W2-865 LM01A-W3-865 LM01A-W1-854 LM01A-W2-854 LM01A-W3-854 LM01A-W1-847 LM01A-W2-847 LM01A-W3-847 LM01A-W3-727 LM01A-W3-733 LM01A-S1 LM01A-A1 LM01A-O1 LM01A-Y1 LM01A-T2 LM01A-B1

20

white white white white white white white white white warm white warm white red yellow green blue

LINEARlight Flex速 SideLED LM11A-W1-865 LM11A-W1-854 LM11A-W1-847 LM11A-A LM11A-Y1 LM11A-T LM11A-B

Page

white white white white green blue

33

ORDER NUMBERS Product reference

Product number

Light colour

BACKlight LM03A LM03A-W1-865 LM03A-W2-865 LM03A-W1-854 LM03A-W2-854 LM03A-S1 LM03A-A LM03A-O1 LM03A-Y1 LM03A-T2 LM03A-B1 BL-T Installation Aid

4050300817231 4050300886886 4050300817255 4050300886909 4050300794990 4050300948638 4050300948645 4050300798868 4008321031174 4050300948669 4008321161284

4008321174680

Product reference

Product number

OPTOTRONIC® control gear for outdoor applications OT 6/100-120/10 CE OT 6/200-240/10 CE OT 6/100-120/24 CE OT 6/200-240/24 CE OT 12/220-240/10 LE OT 50/120-277/10 E OT 75/120-277/24 E

35

36

OT DIM OT RGB 3 Channel DIM OT RGB Sequencer OTi DALI DIM OT RGB DMX DIM OT RGB Master Sequencer OT RGB Slave Sequencer OT-POTLED/10

Page

39

4008321128911 4008321113306 4008321129130 4008321113269 4008321174253 4050300861500 4050300861487

OPTOTRONIC® control components for RGB

white

AQUALED DRAGON™ AQUALED DRAGON WS WHITE 4008321179630 (Stainless Finish) AQUALED DRAGON BS BLUE 4008321179593 (Stainless Finish) AQUALED DRAGON GS GREEN 4008321179616 (Stainless Finish)

34

white white white white super red red orange yellow green blue

DRAGONchain™ DC02A-W3-865

Page

40

4050300943459 4050300793108 4050300792460 4008321611195 4008321160829 4008321185280 4008321185303 4008321185198

White

OPTOTRONIC® DALI combined units

Blue

40

OT DALI 25/220-240/24 RGB 4050300829463

Green

OPTOTRONIC® EASY FOR RGB

AQUALED DRAGON DRIVER 36

42

™

OT-AQUALED DRAGON DRIVER 220/240

4008321185242

OT EASY Color Control accessories

AQUALED 36 47005-70 AQUALED WG WHITE (Granite Finish) 47005-71 AQUALED WC WHITE (Chrome Finish) 47005-72 AQUALED BG BLUE (Granite Finish) 47005-73 AQUALED BC BLUE (Chrome Finish)

4050300160580

White

4050300160603

White

4050300160566

Blue

4050300160627

Blue

AQUALED POWER SUPPLIES 36 OT-6/200-240/10 CE Outdoor OT-12/230-240/10 Indoor OT-50/120-277/10 E Outdoor OT-50/220-240/10 Indoor

4008321113306 4050300609232 4050300861500 4050300817491

OPTOTRONIC® control gear for indoor applications OT 8/200-240/24 OT 12/230-240/10 OT 20/230-240/24 OT 20/120-240/24 S OT 50/220-240/10 OT 75/220-240/24 OT EASY 60/220-240/24 RGB

4008321040169 4050300609232 4050300618111 4050300662626 4050300817491 4050300817477 4008321187796

OT EASY 60/220-240/24 RGB 4008321187796

38

DALI® EASY II controller EASY RMC remote control IR receiver EASY IR IR receiver, ceiling installation EASY IR CI Y-CONNECTOR Pushbutton coupler EASY PB COUPLER EASY PC KIT

4008321053046 4008321053152 4008321053138 4008321915573 4050300803142 4008321915597 4008321915559

OPTOTRONIC® control gear (constant current) OT 9/200-240/350 OT 9/100-120/350 E OT 9/10-24/350 DIM OT 9/200-240/350 DIM OT 18/200-240/700 DIM1) OT 35/200-240/700

42

43

4050300888262 4050300888835 4050300888897 4008321187321 4008321139320 4008321168365

Hilite Illuminated Acrylic Tubes

44

Hilite RGB Colourmix

46

Hilite Accessories

46

49

50

51

For further information go to http://www.osram.com.au/led/led.html Further technical information.

The ideal system partners for EASY Color Control are: • OPTOTRONIC® OT EASY 60 for LED modules • QUICKTRONIC® QTi DALI® for fluorescent lamps • HALOTRONIC® HTi DALI® for low-voltage halogen lamps (12 V)

OSRAM Australia

IMPEL New Zealand

Head Office PO Box 673 Pennant Hills NSW 1715 Sydney Australia

A Division of Redeal Limited Private Bag 92 917 Onehunga, Auckland NEW ZEALAND

Customer Service and Sales Phone: 1300 134 483 Fax: 1300 138 618

Customer Service and Sales Phone: + 64 (0)9 622 6500 Fax: + 64 (0)9 622 9574

D3227 05/07 OSRAM

OSRAM online tools for the optimal LED overview: The LED module quickfinder helps you to search for the appropriate light source.

The online calculation tool OSRAM LED deSIGNer identifies the ideal product amounts for BACKlight modules used for backlighting and lists the suitable control gears as well as the corresponding ordering data.

Subject to change without notice. Errors and omission excepted.

For further information on QTI DALI® and HTi DALI® from OSRAM, please refer to the DALI Guide. For information on OT EASY 60 and LED modules from OSRAM, please refer to the OPTOTRONIC® Guide or to our signage brochures (Download −> www.osram.com.au).