PSI Product Review 2021

PRcover21_001_ProductReview_10 18/12/2020 16:37 Page 1

Jan 2021

product review

ÂŁ15.00

The independent guide to innovative security solutions

Project2_Layout 1 23/10/2020 16:40 Page 1

Contents p3_000_ProductReview_11 18/12/2020 12:57 Page 3

CONTENTS

2021

product review 4 Pyronix

The Pyronix LightCamera delivers the ideal solution to take perimeter protection to the next level

22 QED

Choosing to install Tenda switches will ensure smooth streaming even when eight IP cameras are working simultaneously with a transmission distance up to 250m

6 Acam Technology

CONTACTS

Milesight’s award-winning UK distributor, Acam Technology, share some valuable insights into what makes the innovative mini panoramic range so special

24 Vemotion Vemotion Interactive has updated its range of advanced video software and hardware encoders to include a new and enhanced Vemotion Streaming Protocol

8 Ajax EDITOR Andy Clutton Tel: 020 8295 8308 E-mail: andy.clutton@psimagazine.co.uk DESIGN & PRODUCTION Matt Jarvis Tel: 020 8295 8310 Fax: 0870 4292015 E-mail: matt.jarvis@psimagazine.co.uk ADVERTISEMENT DIRECTOR David Lewis Tel: 020 8295 8309 Fax: 020 8295 1919 E-mail: david.lewis@psimagazine.co.uk ADMINISTRATION Tracey Cole Tel: 020 8295 8306 Fax: 020 8295 1919 E-mail: tracey.cole@proactivpubs.co.uk MANAGING DIRECTOR Mark Quittenton CHAIRMAN Larry O’Leary FOLLOW PSI MAGAZINE

MotionCam raises the informing quality of the Ajax security system to the next level while preserving its fundamental characteristics

Editorial and Advertisement Office PRO-ACTIV PUBLICATIONS LTD PO BOX 332 DARTFORD DA1 9FF © Pro-Activ Publications Ltd 2021 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information storage and retrieval system, without permission in writing from the publisher.

ISSN: 1360-6476 PSI is currently available for an annual subscription rate of £48.00 (UK only)

www.psimagazine.co.uk

Pat Jefferies of Abloy UK takes a look at the diverse needs of the UK door market and discusses finding the right solution for the right door

10 Inner Range Inception blends powerful security measures with ease of use and trouble-free access at single sites

28 barox

12 Uniview

30 Tried and tested

Coupled with the AI Smart Intrusion Prevention, the UNV ColourHunter camera is ideal for 24/7 night time security and protection

Some memorable independent technology tests from 2020

14 SATEL Security-based editorial contributions to PSI are welcomed, and the Editor reserves the right to alter or abridge text prior to publication. The views expressed in PSI are not necessarily those of the publishers.

26 Abloy UK

SLIMLINE motion detectors from SATEL speed up installation proving that not all PIRs are the same

‘Smart Sticky’ MAC & IP address Enterpriseclass network security in focus

32 PSI Reviews A selection of independent reviews from the pages of PSI magazine

42 Open Door Technology news items from PSI’s multimedia platform

16 Texecom Texecom Cloud helps installers to save money and increase revenues by being more efficient and adding value to their customers

18 CSL My Base is CSL’s handy Installer App that allows Installers to remotely manage, configure and test their connected devices

20 barox Clear Vision Technologies, in conjunction with barox Kommunikation AG, has launched a CPD Certified training course

3

EDIT pyronix_000_ProductReview_11 17/12/2020 15:01 Page 2

PSI PRODUCT REVIEW 2021

Pyronix

Add the Pyronix LightCamera for the ultimate outdoor video solution

With a growing demand for additional outdoor security options from end users, the Pyronix LightCamera delivers the ideal solution to take perimeter protection to the next level

P

The LightCamera is a perfect upsell on maintenance visits, expands the product portfolio, and allows you to increase profits, while remaining competitive with non-professional consumer-level alternatives

4

roviding a key upsell to the intruder alarm system, as well as a standalone product for customers, this superior video solution puts end users in control of their security, while enhancing your offering and revenue capabilities.

In domestic, retail and commercial settings, the need to protect vehicles and outbuildings, as well as tools and equipment stored in vans, has become much more commonplace, with highvalue and high-risk items such as caravans, bikes and trampolines often kept in poorly secured sheds, garages or even outside.

The LightCamera has been specifically developed to offer the ideal solution. Easy-touse with ProControl+, it can be fitted as a standalone product or integrated with Pyronix app-enabled systems; linking with XDL12TT-WE outdoor detectors to deliver advanced video verification and voice push notification alerts of activity via the smart device app, for a more comprehensive system.

With a ‘perimeter breached’ voice push notification grabbing the user’s attention and advanced video verification confirming the activity, the user can then take direct action using the LightCamera’s two-way talk feature to speak to the potential intruder, as well as manually sounding the loud in-built audible siren to startle and scare them off, while the dual lights illuminate the area.

Available in white or black, the LightCamera fits well against windows, drains and soffits to

provide a discreet solution.

Installation of the LightCamera is very simple too - requiring a mains electrical supply, an existing Wi-Fi network to connect to and a customer with a compatible Apple iOS or Android smart device. If replacing an existing floodlight, it’s even easier to provide a simple, cost-effective and feature-rich solution for every home.

The LightCamera is a perfect upsell on maintenance visits, expands the product portfolio, and allows you to increase profits, while remaining competitive with nonprofessional consumer-level alternatives. Unlike many competitor products who charge a fee to record clips, the LightCamera is also subscription-free and uses either a MicroSD, a local NVR or both.

Featuring no Pyronix branding, you can also keep your installations on-brand; creating a completely professional finish that drives business back to you.

Add the LightCamera to your basket of goods to stand out from your competition, stop intruders in their tracks and keep your users safe. For more information get in touch with your Pyronix Local Account manager for a full demonstration or training session: https://bit.ly/2JSdBu8

www.psimagazine.co.uk

Project1_Layout 1 17/12/2020 11:33 Page 1

Experience a safer and more open world Compliant Locking Solutions Wired and Wirefree integrated Access Control Controlling the movement of people Suitable for touch-free entry and exit The right solution for the right application

Incedo™

Part of ASSA ABLOY PSI F ll

i dd 1

For more information: info@abloy.co.uk 01902 364500 10/12/2020 16 46 32

EDIT Acam_000_ProductReview_11 17/12/2020 11:55 Page 2

PSI PRODUCT REVIEW 2021

Acam Technology

Introducing Milesight’s IP Panoramic Mini Series

Milesight’s award-winning UK distributor, Acam Technology, share some valuable insights into what makes the innovative mini panoramic range so special

“Throughout our 23 years in business, we have developed a clear understanding of what it is our customers look for in a CCTV solution, therefore only choosing quality manufacturing partners like Milesight”

6

W

hat is increasingly evident in their evergrowing innovative and state-of-the-art range, is Milesight’s commitment to continuously evolve their products. The panoramic series of IP cameras are perfect examples of this.

Unrivalled performance The 180° field of view on this ONVIF compliant range makes for an incredibly cost-effective solution – giving complete situational awareness and reducing the need to install multiple cameras.

Customers benefit from superior storage efficiency and reduced bandwidth requirement thanks to the H.265+ compression.

Available in 5MP and 4K, the superb image quality of these cameras is further enhanced by the 0.005Lux ultra-low light sensitivity, wide angle IR LEDs and innovative housing design – ensuring a clear 180° image, day or night.

Milesight’s renowned 120dB Super WDR feature provides greater detail in shadow and highlight areas, whilst the built-in correction technology produces distortionfree images.

As with all Milesight products, included as standard are 10 modes of video content analytics, enabling more comprehensive activity detection in the entire field of view.

Industry leading IP67 weather proofing and IK10 vandal resistance allows the cameras to maintain their performance in

adverse conditions, whilst the built-in microphone’s quality is preserved by the unique PTFE protective membrane.

Each camera has an integrated junction box for connection concealment and the Mini Bullet also incorporates an internal RJ45 port, thus avoiding the use of clumsy cable harnesses usually included with similar competing products.

Valued partnership Now in their sixth year as a distributor, Acam have been reflecting on why Milesight continue to be their number one choice for quality products.

“Thinking back to when we first came across Milesight many years ago, they were a relatively small independent Chinese manufacturer with a limited number of products” recalls Acam’s Managing Director, Chris West.

“We watched their range expand over a number of years visiting trade shows before becoming a partner in 2015. It was exciting to see Milesight’s presence grow over time and we didn’t want to miss out on being part of their journey.”

“I remember thinking how refreshing it was to find a far-east company with a very Western philosophy towards not only business in general but also product design.”

“Throughout our 23 years in business, we have developed a clear understanding of what it is our customers look for in a CCTV solution, therefore only choosing quality manufacturing partners like Milesight.”

acamtechnology.com +44 (0)1332 382555

www.psimagazine.co.uk

Project1_Layout 1 17/12/2020 09:57 Page 1

0DQDJH FRQͤJXUH DQG FRQWURO \RXU DODUP V\VWHP SRUWIROLR Now ZLWK IUHH PHPEHUVKLS RSWLRQ

Support your customers remotely

6LJQ XS WRGD\ cloud.texe.com

Texecom Cloud is a web-based portal operating on any internet-connected device and is compatible with connected Premier Elite systems.

Texecom Cloud allows you to offer remote servicing and support - the perfect digital tool to add value WR \RXU FXVWRPHUV ZLWKRXW KDYLQJ WR OHDYH \RXU KRPH RU RIͤFH

FORXG WH[H FRP

EDIT Ajax_000_ProductReview_11 17/12/2020 11:58 Page 2

PSI PRODUCT REVIEW 2021

Ajax

MotionCam: The next level of informative alarms

The market required the new cost-efficient solution that would unite the reliability and informing efficiency of the best security systems with the visual capabilities of the cameras

ajax.systems

8

E

ven the most reliable security equipment is never fully protected from false alarms. Most of the time, they occur due to simple oversights, hyperactive pets, or incorrect installation. But when the security companies react to false alarms, they risk getting late in case of a real emergency. Some send security patrols to check the unverified alarms right away. The others count the detector triggerings before responding and lose precious minutes in the result. In any case, false alarms bring stress for the consumers and the risk of suffering losses.

Prime security companies found the solution in photo and video alarm verification. Both options came with serious compromises. On the one hand, motion detectors equipped with cameras provided a technical possibility to see what triggered the alarm. But the systems that support such devices required frequent maintenance (due to low battery life), delivered low-quality pictures, and were significantly overpriced. On the other hand, video surveillance allowed for a 24/7 monitoring but came with the new difficulties: complicated installation and configuration, total dependence on the building’s infrastructure, high risks of malfunctioning and exploits, as well as the privacy issues. Both solutions didn’t have a chance to become the new security standard.

The market required the new cost-efficient solution that would unite the reliability and informing efficiency of the best security systems with the visual capabilities of the cameras.

We weren’t the first ones to develop the security system with visual alarm verification. But we have rethought the experience of using the equipment from the consumer’s and the service provider’s points of view. We tested and analyzed the weak spots and best practices in the industry and eventually created a breakthrough product in terms of informing speed, communication distance, and battery life.

To ensure fast and reliable transmission of the photo confirmations, we’ve developed a new Wings radio protocol based on Jeweller. The technologies that MotionCam and Hub 2/Hub 2 Plus use to communicate, nullify the interference between channels during the parallel transmission of alarms and pictures. With Wings, you can view the first snapshot of the situation in under 9 seconds! While the alarm signals sent via Jeweller are still delivered in a split second.

Once motion is detected, MotionCam takes up to 5 photos, which are compiled into an informative animation in the Ajax app Photo transmission does not shorten the MotionCam communication range. Just like the rest of the Ajax detectors, the gadget operates at a distance of 1700 meters from the hub. This number is one of the top performance results for a camera-equipped detector. The Ajax security system still covers an area of up to 12 km², which is enough to protect the multi-story buildings but now with visual alarm verification.

MotionCam features an extraordinary—for a camera-equipped detector—autonomy with up to 4 years of battery life. This is not an optimistic forecast with ideal use conditions. Instead, it is an estimate for the typical operating conditions, which includes the regular activations and changes in weather conditions.

And we’ve considered the privacy issue. The MotionCam detectors activate their cameras only if triggered by motion when the system is armed.

The users and the security company have no way to access the camera and request to take pictures.

All photos are encrypted during transmission, and as they are stored at the Ajax Cloud (just like all the events in the security system’s log). No one analyzes and processes the photographs from your detectors.

MotionCam raises the informing quality of the Ajax security system to the next level while preserving its fundamental characteristics.

Popular central monitoring software across Europe like Patriot, SBN, ABsistem, WBB, Horus, or Manitou support taking photos from the device. And the recent winning of the “Intruder Alarm Product of the Year” category at the PSI Premier Awards is a major recognition of MotionCam from the British professional community.

“I am proud that we can make such inventions.

Without a doubt, the Wings technology sets the new standards in the security industry. Fast photo transmission at a distance of 1700 meters with phenomenal energy efficiency — it’s magic that was previously unavailable on the market. We’ve managed to boost the informing quality of the system to the next level and preserve the familiar user experience at the same time” - Aleksandr Konotopskyi, Ajax Systems CEO

www.psimagazine.co.uk

Project1_Layout 1 10/12/2020 12:14 Page 1

EDIT Inner_000_ProductReview_11 17/12/2020 14:01 Page 2

PSI PRODUCT REVIEW 2021

Inner Range

Robust security and easy access for single sites users and security managers alike. By automating some building and facilities functions, security managers can free up their time to deal with the most important matters.

Latest updates Other recent updates to Inception include being able to support up to 96 areas within a single site and the use of Two-Factor Authentication (2FA) with Google Authenticator.

Inception can now automatically import new user data from CSV files, such as data from booking or payroll systems that automatically loads into an Inception controller.

An update to Inception’s alarm reporting settings ensures compliance with UL standards by allowing more granular information about alarm states to be recorded. This helps security managers understand issues and events on site and respond more efficiently.

Inception is Inner Range’s award-winning Entry-level access and security system that blends powerful security measures with ease of use and trouble-free access at single sites

I

t is simple to install, offers anytime anywhere web browser access without the need for additional software and can integrate with CCTV and some building automation functions to benefit users.

Occupancy controls for safer environments

Recent updates to Inception include being able to support up to 96 areas within a single site and the use of Two-Factor Authentication (2FA) with Google Authenticator

Inception allows building managers to create safer environments by controlling the number of people on site or in particular areas. Inception can count users in and out of specific spaces and restrict access once a set occupancy threshold has been reached. This could be across the whole building, lifts, car parks or individual rooms or offices. Once the level is reached further users’ permissions are suspended until the occupancy count has a spare space.

Health and safety managers receive real-time monitoring and alerts. A report can be run at any time to confirm the occupancy status of any designated area. Inception can also produce trace reports to find specific people, for example to help locate the nearest first aider or security person in an instant.

Smart building automations

www.innerrange.co.uk

10

User counts can also be used to trigger other automated actions, such as being able to change heating and air conditioning depending on the number of people on site, or in a particular area.

User counts can trigger messages about parking availability for drivers as they enter car parks, or the automatic setting of alarms as people leave the site. All these make life better and easier for

Cyber security Inner Range has just announced a new strategic focus on cyber security, after auditing and formalising several existing cyber security measures. This continues a long history of robust cyber security at the access control manufacturer, with no reported cyber security breaches in its 30year history.

As with all Inner Range products, Inception benefits from cyber threat assessment as a routine part of product development, including coordinated penetration testing by independent accredited laboratories. Inner Range is also now offering clients cyber hardening installation guidelines for Inception, to help users and installers set up their security system securely.

Grade 3 intruder alarm Physical security measures are still important and Inception includes an intruder detection system certified as Grade 3, according to European Standard EN5013-1. This means users save time and resources by not needing to buy, install and maintain a separate intruder alarm system. Most insurance companies won’t provide business cover unless a Grade 3 alarm system is in place, so Inception offers peace of mind too.

World leader Inner Range has been a world leader in the design and manufacture of intelligent security solutions since it was established in 1988. More than 150,000 Inner Range systems have been installed in over 30 countries. Customers include hospitals and high-security units, colleges, distribution centres and pharmaceutical companies. government and critical national infrastructure.

www.psimagazine.co.uk

Project1_Layout 1 17/12/2020 11:41 Page 1

CCTV Surveillance’s Best Friend

01772 336111 qedgroup.co.uk sales@qedgroup.co.uk

Quality Essential Distribution are a security distributor that offer fast and effective solutions for the safety and security of people and property.

EDIT Uniview_000_ProductReview_11 17/12/2020 18:10 Page 2

PSI PRODUCT REVIEW 2021

Uniview

Uniview launches ColourHunter network camera

The camera provides 24/7 true colour rather than grainy monochrome video in order to identify perpetrators efficiently in any follow up investigations

Why ColourHunter?

Progressive BSI Sensor

The main challenge for traditional surveillance systems is providing operators with clear images in full colour without losing any of the crucial details necessary for identification – especially in ultra-low illumination.

As we know, most criminal offenses are committed at night. With the new ColourHunter, we can try and overcome this problem. The camera provides 24/7 true colour rather than grainy monochrome video in order to identify perpetrators efficiently in any follow up investigations. In addition, with the AI Smart Intrusion Prevention function, the alarm will only be triggered by human and vehicle targets; reducing false alarms.

The ColourHunter camera is equipped with the latest BSI sensor; allowing more light to penetrate and therefore drastically improving the sensitivity of the lens.

24/7 colourful monitoring powered by innovative technology The power of the ColourHunter’s ability to capture colourful details in ultra-low light derives from three specific hardware technologies: super large aperture, a progressive BSI sensor and high-quality LED lights.

Super large aperture The lens is equipped with a F1.0 super large aperture which allows more light in and significantly improves image brightness.

According to laboratory data, F1.0 super large aperture collects 4 times the amount of light compared with F2.0 aperture.

High Quality LED lights Warm LED lights guarantee lower light pollution and maintain the true colour in any low-light environment.

Reduce false alarm in the darkness The AI Smart Intrusion Prevention (SIP) filters false alarms through focusing only on potential targets. This works by only triggering alarms when humans or vehicles enter an area identified as restricted. Accuracy is increased by SIP with the clearer image quality and the fact ColourHunter provides such excellent image colour in dark environments. This helps operators to quickly identify any security issues, alert night-time guards or take other actions to secure the area.

Application scenarios Overall, coupled with the AI Smart Intrusion Prevention, UNV ColourHunter camera is ideal for 24/7 nighttime security and protection. This camera can be effective in a wide range of environments such as commercial and industrial, residential, retail, city centres and multiplex car parking.

UNV ColourHunter Products

uniview.com

12

www.psimagazine.co.uk

Project1_Layout 1 23/11/2020 13:29 Page 1

Motion Detection

Night Vision, up to 60ft/18m

Built-in Siren, 100dB

LightCamera

Two-way Talk

Putting security in the spotlight Illuminating and verifying, with the power to act Light up dark spots and ward off potential intrusion by adding another layer of perimeter protection, the LightCamera.

View via Mobile app

Dual Lights, 2500 Im

Pyronix Training On-Demand View the LightCamera training course now!

Knowledge is power!

Don’t just verify, act. see it in action now!

www.pyronix.com

PSI - LightCamera Ad V5 .indd 1

08/10/2020 16:15

EDIT Satel_000_ProductReview_11 18/12/2020 12:48 Page 2

PSI PRODUCT REVIEW 2021

SATEL

Motion detectors that speed up installation In 2020 SATEL’s SLIM LINE series of motion detectors made the finals of a UK security industry awards campaign as voted for by installers and were given one of the highest scores of the year in an independent industry product test. If you think PIRs are all the same, you need to think again...

S

ATEL has been developing and manufacturing electronic security products for over thirty years.

This extensive experience has culminated in the release of the new range of motion detectors, SLIM LINE, which offer several time-saving features, as well as substantial improvements in performance and reliability making them the company’s easiest to install motion detectors ever. Not only that, but in 2020 the devices were a finalist in the PSI Premier Awards and scored an amazing 9/10 in an independent test in PSI magazine.

Here we find out why the detectors have been causing a stir in the market:

Sensor sensitivity, operating mode, indicator light colour and LED lighting mode can all be changed easily, without having to open the detector enclosure each time or use a ladder

14

Quick and easy installation All models have a screwless cover, so you can open the enclosure with a flat-head screwdriver, and simply squeeze to close it. All models also include built-in EOL resistors to speed up installation. PRO models also include an adjustable wall and ceiling mount tamper-proof bracket.

Remote configuration A very useful feature for installers, available in the LUNA and PRO models, is the ability to remotely configure the detector operating parameters using the OPT-1 keyfob. Sensor sensitivity, operating mode, indicator light colour and LED lighting mode (LUNA models only) can all be changed easily, without having to open the detector enclosure each time or use a ladder.

One enclosure, many detectors SLIM LINE detectors all have the same elegant, slim enclosure, made of high quality plastic. The uniform appearance of all detectors makes it difficult for an intruder to identify the specific model used in the system because all of them look the same, not to mention it makes your projects very neat.

One indicator, many colours Installers can choose the LED indicator colour on all SLIM LINE detectors. Depending on the model, there are either four or seven colours available – if necessary, the LED indicator can also be turned off permanently.

Independently certified All SLIM LINE motion detectors meet the requirements of the EN 50131 Grade 2 or Grade 3 European Standards for motion detectors, and have been independently certified by Trezor Test.

Extended warranty All SLIM LINE detectors also come with a five-year warranty against manufacturing defects. www.satel.eu

About SATEL Since its launch in 1990, SATEL has built a welldeserved reputation as a manufacturer of high quality electronic products. Their catalogue of over 500 products includes intruder detection, building automation and fire alarm systems. All hardware and software are developed in-house by its R&D team and manufactured at a stateof-the-art automated plant in Poland.

SATEL is distributed in the UK by Unlimited CCTV & Security.

www.psimagazine.co.uk

Project1_Layout 1 26/10/2020 19:21 Page 1

Access Control

Intruder Alarm

Automation

Multiple Devices

No Software Required

Easy Setup with Checklist Prompts

Send IP Alarms via Multipath-IP Network

INTEGRATED ACCESS SECURITY POWERFUL WEB BASED CONTROLLER T: +44 845 470 5000 |

E: ireurope@innerrange.co.uk

innerrange.co.uk

EDIT texecom_000_ProductReview_11 17/12/2020 17:59 Page 2

PSI PRODUCT REVIEW 2021

Texecom

Manage, configure and control your alarm system portfolio

Texecom Cloud helps installers to save money and increase revenues by being more efficient and adding value to their customers. It is a web-based portal operating on any internetconnected device and is compatible with SmartCom communicating Premier Elite systems.

Custom Templates - Create your own custom programming templates from previous installations or imported WinTex profiles. Reduce programming steps, guarantee consistency from site-to-site, and eliminate programming errors.

Access Anywhere

T

Texecom Cloud is always there, always available, wherever and whenever you need it. Accessible through any internetconnected web browser, Texecom Cloud can be accessed via desktop, laptop, tablet or smartphone

execom Cloud’s built-in remote maintenance automate and record the maintenance process, making it easy for installers to offer maintenance contracts and saving unnecessary site visits.

Health Checks - Automatically monitor systems regularly to ensure correct operation. their entire portfolio of alarm systems, providing peace of mind that all systems are operational, and identifying any issues that may otherwise go undetected.

Comply with Standards - European and British Standards mandate maintenance checks for any insurance approved system with police response.

Service Reports - Gold Membership provides formatted service reports that provide authoritative information regarding their system status, automatic emailing of services reports to either staff members or directly to customers, with fully customisable email content for each individual site.

System Programming Whizz through your programming needs.

Texecom Cloud makes system programming simple, quick and easily accessible – so much so, you’ll never need to program from the keypad again.

On-site or Remote - With Texecom Cloud you can program anywhere. Onsite, in the van, in the office – adding value to customers instantly without having to travel.

16

Texecom Cloud is always there, always available, wherever and whenever you need it. Accessible through any internet-connected web browser, Texecom Cloud can be accessed via desktop, laptop, tablet or smartphone.

Manage Access - Texecom Cloud gives you complete control over your alarm system portfolio, including safeguards to ensure only the right people have access to the right data.

Manage your Team - Engineers are restricted to only view and access security systems that are specific to them.

Always Up-to-date - Texecom Cloud application software automatically updating with future releases, you’ll never have to update your panel configuration software again.

Membership All professional installation companies, big or small, can now benefit from Texecom Cloud services.

Texecom has simplified the membership options and introduced a free membership plan, removing up-front costs and providing instant access to Texecom’s suite of value-adding digital services.

Free Membership Plan - No annual subscription with up to 20 employee logins. Add unlimited Texecom Connect app users and view your Texecom Connect portfolio for free. Texecom Cloud services available on a price per system, so you’ll only pay for what you use.

Gold Membership Plan - Premium features include unlimited employee logins, Texecom Connect app branding with options to delete or disable apps (feature available soon), customised service reports and automatic email reporting.

Sign up now for your Texecom Cloud account and see what all the fuss is about. Visit cloud.texe.com/signup.html

www.psimagazine.co.uk

Project1_Layout 1 17/12/2020 09:58 Page 1

EDIT CSL_000_ProductReview_11 17/12/2020 13:54 Page 2

PSI PRODUCT REVIEW 2021

CSL

The My Base App My Base is CSL’s handy Installer App that allows Installers to remotely manage, configure and test their connected devices. It is compatible with the award-winning DualCom Pro Range – which offers Installers easier, faster installation of professional signalling systems

A

t the initial installation stage, the My Base App allows Installers to view the signal strength and radio technology utilised by their device, to optimise performance. The instant commissioning tool utilises the camera function within the App. Simply scan the QR code on the DualCom Pro and this will enable instant device registration and begin the super-fast commissioning process. Test alarms can be sent from the device to the ARC via the App to ensure the system is working correctly and that signals are reaching the ARC as expected. Additionally, there is an option to enable Smart Reporting via the App, to reduce the ‘noise’ at the ARC created by single-path failures.

The My Base App enables Installers to perform remote servicing and management tasks, whenever they want and from wherever they are After installation, the My Base App enables Installers to perform remote servicing and management tasks, whenever they want to and from wherever they are, saving time and improving customer service. An Installer can amend or update the configuration of the device quickly and securely, in just a few simple steps. Installers can change pins, perform a ‘pins learn’ process and configure panel connections for each device, whilst providing the live status of their entire DualCom Pro base.

The My Base App also offers different levels of permission for users including full access Admin for Management and One Time Access for Engineers. This enables all employees to utilise the benefits of the My Base App, whatever their role in the business.

The My Base App is available to download now from the App Store or Google Play. Contact CSL today to get set up: sales@csl-group.com csl-group.com/uk/products/dualcom-pro.html

18

www.psimagazine.co.uk

Project2_Layout 1 23/10/2020 16:42 Page 1

EDIT barox_000_ProductReview_11 17/12/2020 12:26 Page 2

PSI PRODUCT REVIEW 2021

barox

CPD video networks system design training in conjunction with barox

Supporting installers and integrators to achieve optimum results for their IP camera installations, Clear Vision Technologies in conjunction with barox Kommunikation AG, the global technology leader and specialist manufacturer of ‘Switches made for video networks’, has launched a Continuing Professional Development (CPD) Certified training course

“In the world of video networks, barox is supporting customers with the need to keep up to speed with the latest advances in technology and best practice network design”

20

A

imed at IP camera system newcomers, the CPD certified course explores and explains the differences between standard data switches vs. video specific switches, and understanding IEE802 networking standards vs. high capacity video specific standards.

Subjects covered within the CPD course include setting-up the Digital Management System (DMS), ring topology design, easy cable connection diagnostics, active camera tracking, PoE consumption control, port security and much more.

For those wishing to improve on their existing skills, the CPD Certified course is designed to extract the most from video networks and video switch performance; looking at switch and network security, advanced switch configuration and port programming, graphical management (maps and plans), hi-power PoE distribution and cyber security. The training addresses issues such as the effect on network functionality in relationship to bitrate and bandwidth settings, and advanced device control and functionality, including the set-up of Mac locking, Login certification, Access control list and Multiple user control cyber protection.

“In the world of video networks, barox is supporting customers with the need to keep up to

speed with the latest advances in technology and best practice network design,” says Rudolf Rohr, barox Co-founder & Managing partner. “Designed for systems integrators and engineers who design, install, maintain or repair CCTV systems, the Clear Vision Technologies CPD Certified training course, supported by barox, explains how to capitalise on the powerful functionality of highperformance video switches and reveals many tips for planning reliable video systems with connected PoE devices.”

For more information on CPD Certified video network training courses, interested parties can contact Clear Vision Technologies on 01622 232600 email info@cv-tech.tech or visit www.cv-tech.tech

www.psimagazine.co.uk

Project1_Layout 1 17/12/2020 09:56 Page 1

EDIT QED_000_ProductReview_11 17/12/2020 16:51 Page 2

PSI PRODUCT REVIEW 2021

QED

Caught on Camera – Best Switch for CCTV Surveillance

I

t goes without saying that having a CCTV camera installed at your premises will act as a serious deterrent to criminals. We know the sight of a CCTV camera makes criminals think twice about breaking into a building, stealing equipment or committing vandalism.

With darker nights and crime reports on the increase it’s more important than ever to carefully consider the security solutions your customers need to put in place to protect their property and people. Although security guards provide an element of protection on the ground they can’t be everywhere or see everything that is happening on site. And we know this is where CCTV cameras and effective security systems play a crucial role within the daily running of a business.

“We made a decision to partner with Tenda as they are recognised as a leading supplier of networking devices. More importantly, we believe customers will reap the biggest benefit as we will offer a range of high-performance networking solutions at a very competitive price” – Matt Philp

22

IP technology has developed rapidly in the last decade and an increasing number of new surveillance projects are now completely IP-based but the main question is: how do you choose the right system to ensure maximum security performance? One major component when setting up a camera system for IP surveillance is choosing the right switches. Tenda Network Switches offer an effective solution with brilliant image monitoring and traffic processing capabilities which are always tested for optimised performance.

Matt Philp, Managing Director, Quality Essential Distribution said: “We made a decision to partner with Tenda as they are recognised as a leading supplier of networking devices. More importantly, we believe customers will reap the biggest benefit as we will offer a range of highperformance networking solutions at a very competitive price.”

Choosing to install Tenda switches will ensure smooth streaming even when eight IP cameras are working simultaneously with a transmission distance up to 250m. The range of switches is extensive and is perfect for all installation sizes.

There are many further reasons why a good switch for CCTV surveillance is essential - get in touch with Quality Essential Distribution and ask us about the qedgroup.co.uk Tenda switch range.

www.psimagazine.co.uk

Project1_Layout 1 17/12/2020 09:55 Page 1

EDIT Vemotion_000_ProductReview_11 17/12/2020 18:12 Page 2

PSI PRODUCT REVIEW 2021

Vemotion

Vemotion wireless video encoders now include enhanced Vemotion Streaming Protocol Data and cost savings

Vemotion Interactive, the leading UK supplier of highperformance wireless video streaming solutions for systems integrators and OEM solutions providers, has updated its range of advanced video software and hardware encoders, to include a new and enhanced Vemotion Streaming Protocol

N

“The new Vemotion Streaming Protocol not only improves the efficiency of the video stream in normal circumstances, but even more so when the network is challenging”

For further information about Vemotion’s range of high performance wireless video encoders, Vemotion can be contacted on Tel: +44 (0) 330 397 2796, email: info@vemotion.com, or visit www.vemotion.com 24

ow available, the Vemotion Streaming Protocol (VSP), has been designed to further improve the efficiency of Vemotion’s GPRS, 3G/4G, Wireless 802.n, microwave link, satellite and broadband streaming technology.

Building on the company’s market leading minimal latency/high quality streaming technology, the new VSP offers improved efficiency of the video/data stream in normal circumstances but comes into its own when deployed within challenging network environments.

A proprietary protocol developed specifically for live, real-time video streaming, by employing Vemotion’s innovative algorithms VSP removes superfluous data transmission messaging that is not required, reducing the amount of data traffic on the network and making more bandwidth available for the video stream. This advanced, field proven Vemotion technology delivers unparalleled streaming HD video quality and allround streaming performance across a variety of general, and harsh operating environments.

An acknowledged industry leader in its space, Vemotion’s VSP reduces the amount of data required to send video from the encoder to the video server, increasing the efficiency of the Vemotion streaming software: allowing better resolution for the same data rate, or the same resolution but allied to lower data costs. The flexibility of the Vemotion software means that users can decide to use the efficiency to increase the frame rate instead of resolution when required, giving smoother PTZ imaging, which is particularly advantageous when tracking a fastmoving object, such as vehicles.

On expensive data networks where customers are paying per Mb, Vemotion’s highly efficient streaming can save significant amounts of budget on data costs. In addition, Vemotion can optimise a service for the data bundle and situation, so for example, if streaming video is required constantly for a month, the technology can be configured to make sure that it manages to do so within the limits of the data package purchased.

Thanks to optimised and specific Vemotion algorithms, as well as being able to optimise streaming settings to match a network’s requirements, saving data, efficient use of a network’s bandwidth means that less data is needed for the same image quality. This not only enables savings on data usage when viewing video over any network but can mean the difference between streaming high-quality video, or no image when using latent networks such as satellite.

Ideal for mobile applications such as cameras on vehicles, drones, helicopters and satellite communication links, the new VSP enhances any remote streaming/mobile location application.

Surveillance flexibility With VSP’s high-definition, high quality video streaming, the option to substitute fibre networks for mobile networks can save money and increase flexibility of service. Being able to relocate cameras to target areas and move them again as situations change, unleashes the surveillance cameras’ investment. Areas previously out of range of a fixed camera network or in an area of poor coverage can now be accessed for video surveillance and using fewer cameras.

Vemotion’s encoders and video streaming technology is compatible with analogue and IP cameras from all the major manufacturers. Being camera agnostic enables users to further extend the capabilities and lifespan of their existing equipment. In addition, unlike with standard or off-the-shelf wireless video transmission systems, Vemotion’s streaming video technology has been specifically developed to suit low bandwidth or unreliable network conditions, such as satellite or cellular networks.

“The new Vemotion Streaming Protocol not only improves the efficiency of the video stream in normal circumstances, but even more so when the network is challenging, dealing with drop out and restarts, or very slow and congested networks with ease,” says Steve Haworth, CEO at Vemotion.

“Partner friendly, Vemotion technology can greatly enhance the value of video networks and OEM solutions. As a business, Vemotion is agile and works to innovate with customers to secure successful video surveillance solutions.” www.psimagazine.co.uk

Project1_Layout 1 23/11/2020 13:32 Page 1

Get Recognised Get Registered

The Professional Register Raising Professional Standards in the Security & Fire Industry Recognising Competence and QualiďŹ cations for Individuals who Install & Maintain Security & Fire Systems.

Find out more or Register now at:

www.ctsp.org.uk

EDIT Abloy_000_ProductReview_11 17/12/2020 16:48 Page 2

PSI PRODUCT REVIEW 2021

Abloy UK

Keeping access control compliant and future-proof Pat Jefferies, Commercial Director at Abloy UK, takes a look at the diverse needs of the UK door market and shares his thoughts on finding the right solution for the right door applications.

For example, many commercial properties – whether that’s offices, education, healthcare or hospitality – will find wired locking doors more suitable for external doors which require high security. Meanwhile, wireless locks have fewer components making them easier to install or retrofit. What’s important is that both deliver functionality, such as providing an audit trail of users, and essentially creating ‘smart doors’.

The added a mix of electric, contactless and mobile keys all operating from the same OS make it an effective and convenient system to manage.

I

n many European countries, buying a door means buying a door set, complete and preassembled with factory fitted handles, hinges and latches.

When doing the same in the UK, however, you’re really just purchasing a door blank with hardware sold separately. With so many types of doors and furniture available, the possible combinations for access control solutions are almost unlimited.

Every individual door application is potentially different, and its use or purpose can vary. But naturally this throws up challenges too, as it’s crucial to provide the right solution for the right application.

Above all, it’s never been more important to ensure compliant access control solutions are installed. Legislation such as the Building Safety Bill, which aims to improve building and fire safety, is likely to become law in 2021 and it’s the responsibility of every specifier, installer and building owner to ensure the standards are met.

To find out more about other products and services available from Abloy UK, visit www.abloy.co.uk call 01902 364 500 or email info@abloy.co.uk

26

Where to start?

Safely managing the movement of people in commercial spaces is crucial, and selecting the correct access control system for your doors can help achieve this. After all, the way we move may be complicated, but access control doesn’t have to be.

I believe the future of access control is a combination of integratable wired and wire-free solutions to suit the diverse range of

The next growth area Currently, the safe movement of people is the overriding factor shaping the UK door market.

Reports show that 86% of people in the UK now expect touch-free access, preferring to use touchless interfaces, mobile apps or facial recognition technology to interact with their surroundings - the second highest in the world and only behind China (90%).

With so many demands required from one system, whether it’s security, touch-free access, fire safety or controlling the movement of people, only a flexible system can be relied upon to deliver and continue to grow.

Abloy has a range of products available to suit virtually any requirements that are compliant to panic and emergency exit device standards including BS EN 179, BS EN1125 and BS EN 13637.

Our range of hardware also allows organisations to create a scalable, future-proof access control system, with the new Assa Abloy Incedo™ Business access control system, Assa Abloy Aperio™ wireless locks, Escape Door Systems, CLIQ digital key systems and hardwired Electric Locks & Strikes.

Remember, if in doubt consult specialists to ensure the door and its furnishings are fit for purpose to ensure building and fire safety. If you’re looking to expand your own knowledge, Abloy regularly provides free training to help ensure compliant solutions are specified and installed where required.

www.psimagazine.co.uk

Project1_Layout 1 17/12/2020 17:20 Page 1

Always Connected.

Always Secure.

Always Live.

Take control of your connected devices, wherever you are.

For more information: t: +44 (0) 1895 474 474 e: sales@csl-group.com visit: www.csl-group.com

EDIT barox 2_000_ProductReview_11 17/12/2020 12:24 Page 2

PSI PRODUCT REVIEW 2021

barox

barox ‘Smart Sticky’ Enterprise-Class network security

“barox Smart Sticky provides a very high level of Cyber and physical network protection for use within a wide variety of applications”

For more information about barox Smart Sticky Enterprise-class network security and range of professional video switches, customers can visit: www.barox.ch/en or contact Clear Vision Technologies at www.cv-tech.tech or Oprema at www.oprema.co.uk

28

barox Kommunikation AG, the manufacturer of IT switches designed specifically for the demands of video networks, employs ‘Smart Sticky’ MAC & IP address Enterprise-class network security

S

upporting built-in cybersecurity on all barox RY-switches, barox powerful Smart Sticky MAC & IP address learning adds an additional layer of high security.

An easy automatic process via the barox DMS GUI, once configured, barox Smart Sticky learns the dynamic MAC addresses of all connected ports/devices and VLANS, turning them into secure MAC addresses, adding each secure MAC address to the running configuration and freezing them and their associated IP addresses – making them, ‘Sticky’.

Whilst traditional device protection via MAC filtering alone offers simple protection against unwanted network access, it does not, for example, protect against a widespread attack of ‘MAC spoofing’. Smart Sticky with its combined MAC and IP address protection provides advanced port and network security with Limit Control settings. With this functionality, Enterprise-class cyber and physical security is provided with the port being shut down in the advent of the unplugging of a camera/device.

Port security with Limit Control settings By learning the Mac and IP address of each and every port, it is not possible for a port to be hijacked. This prevents an ‘unknown’ device being able to access the network to attack the system

for spoofing/phishing, preventing it from being used for malicious attacks. Only devices with a known MAC and IP address will operate on the network.

If non-managed switches are connected to terminal devices at the barox switch, Limit Control can be used to block free IP/Ethernet terminals and prevent access to the network ports of those non-managed switches. “barox Smart Sticky provides a very high level of cyber and physical network protection for use within a wide variety of applications,” says Rudolf Rohr, barox Co-Founder & Managing Partner.

“This is particularly the case where outdoor networks like car parks, would leave devices such as cameras open to threat, where they could be unplugged and a rogue device plugged in.

“On activation, the barox Smart Sticky function is able to learn the entire MAC and IP address configuration of all ports on a network. In addition, limits can be set to make sure that any unused ports are blocked, to prevent their use and access to the system, whilst active ports are fully protected against unauthorised usage too.

Switch rules can also be set to govern specific port IN/OUT TCP streaming and a White/Blacklist set-up. And furthermore, any changes to network/device configurations need to be authorised to take effect.”

www.psimagazine.co.uk

Project1_Layout 1 26/10/2020 19:15 Page 1

Bosch IP 3000i cameras. Extend smart video surveillance to general surveilance applications.

Bosch all-new IP 3000i cameras offer high-quality, 24/7 performance and something never seen before in such competitively-priced cameras; built-in Essential Video Analytics as standard. Micro dome, mini dome, bullet and turret options are available with resolutions of up to 5MP for indoor and outdoor use. This intelligent solution is an industry first for general, cost-effective video surveillance.

Find out more at boschsecurity.com

EDIT tried 1_PSI_may15 18/12/2020 12:08 Page 1

PSI PRODUCT REVIEW 2021

CCTV – TRIED & TESTED An overview of some of the products we have featured in PSI independent test reports. This month we highlight recent CCTV reviews; products are listed in no particular order. As always, manufacturers and distributors have no input in the test reports or results Bosch – Flexidome NDE-3503-AL Part of the Bosch Flexidome IP 3000i IR range, this fixed dome camera is impact resistant to IK10 with IP66 protection rating and has a 1/2.9” 5MP CMOS sensor, 3.2 to 10mm motorised lens and a range of “Essential” video analytic functions. It has a diameter of 137mm and height of 122.5mm. It has an operating temperature of 30°C to +50°C. Review: A very capable dome camera with a wide range of configuration options.

IDIS – DC-S6283HRXL The DC-S6283HRXL dome is an external IP66, IK10 rated, 1/2” CMOS 2MP Lightmaster PTZ ONVIF compliant dome with 36 times zoom lens and long range IR capability.

Review: A well featured PTZ dome with simple setup, excellent optical performance and enhanced IR illumination.

Concept Pro – CP-HSD20-AHD This Concept Pro IP66 IK10 rated speed-dome is based on the Starvis 1/2.8” CMOS sensor, giving a 2MP (1920 x 1080p) image with a 20x zoom lens and in-built infrared illuminators with a stated range of up to 150 metres. A 30x zoom version is also available. The camera provides outputs for all the main analogue HD formats such as AHD, CVI, TVI along with the digital over coax SDI standard.

Review: An interesting highly sensitive HD speed dome that gives a potentially easy route to changing from analogue HD to IP based viewing and control, compatible with all key analogue HD systems. Some of the camera’s core configuration options are not currently accessible via the browser but possibly may be included in a future firmware version.

Optio – OPA4ED28V12IRG The OPA4ED28V12IRG camera is an IP67 rated, 4 Megapixel (2560H x 1440V) Eyeball style analogue camera with a varifocal 2.7mm to 12mm lens. It consists of an aluminium body and mount available in a dark grey or white finish. Optio products form a subset of the Vista range.

Review: Working with all of the key analogue HD formats and providing up to 4MP resolution this camera is relatively simple to install and set up. When combined with a compatible recorder, this camera allows simple and cost-effective upgrades for legacy analogue systems using coaxial cabling.

www.psimagazine.co.uk

EDIT tried 1_PSI_may15 18/12/2020 12:10 Page 2

SMOKE DETECTION

Hikvision – DS-2CD4A26FWD This camera is a high-end outdoor bullet camera identified as part of Hikvision’s DarkFighter range. The camera offers very high sensitivity and 1920 x 1080p HD performance with pre-installed firmware to provide video analytic functions. These can be selected from options including Audio Exception, Defocus, Scene Change, Face, Line Crossing, Intrusion, Region Entrance, Region Exiting, Unattended Baggage and Object Removal Detection.

Review: The wide range of detection methods mean that this camera can fulfil the majority of current security video tasks. Its builtin Infrared illuminator range and high sensitivity provide very good image quality even in challenging conditions.

Tyco – Illustra Flex IFS02P6INWIT This Indoor HD PTZ dome is from the Illustra Flex range and has a 30 times optical and 12 times digital zoom range with IR illumination up to 25 metres. An external variant has IR support to 150 metres.

Review: A very well constructed PTZ camera unit with straightforward connection and configuration. Some minor issues encountered with setup functions and lens performance but overall, good image quality and extended zoom range.

Hanwha Techwin – Wisenet XNV-8081RE The XNV-8081RE is from the Wisenet X range and incorporates a PoE extender capability to simplify cabling infrastructure when installing a second camera within 80 metres of an existing position. The dome is based on a 1/2.8” 5MP CMOS sensor with a stated 0.07 Lux colour sensitivity and IR LED monochrome illumination.

Review: A very installer friendly ONVIF compliant external dome camera with ease of set-up and an ability to simplify network cabling when retrofitting for additional cameras, installing two cameras to a single location or when needing to install an adjacent PoE device such as lighting or PIR detection.

Dahua – DH-SDT-5X225-2F-WA-0600 The DH-SDT-5X225-2F-WA-0600 is promoted as a 2MP Starlight IR Dual PTZ external network camera. It is from the Dahua WizMind range and is based on 2 x 1/2.8” CMOS sensors, one with a wide angle view and one with a 25x optical zoom lens. “Deep Learning algorithms” are used to support detection functions such as smart tracking of vehicles or humans with automatic filtering of false alarms. .

Review: An interesting ONVIF compliant dome with high sensitivity and capable of tracking subjects while still maintaining an overview of the scene of interest. Good differentiation of targets to track humans and/or vehicles while preventing false alarms.

Uniview – IPC2325EBR5-DUPZ Promoted as a 5MP WDR Starlight Varifocal IP67 network bullet camera, the unit is based on a 1/ 2.7” sensor with a 2.7 to 13.5mm auto-focus motorized zoom lens giving a horizontal angle of view from 93.28° to 28.56°.

Review: A versatile solidly built external bullet camera with a wide range of configuration settings. The security settings allow the camera to be suitably locked-down but the lack of a forced “strong” password is a concern; perhaps a future firmware update will remedy this.

www.psimagazine.co.uk

1

EDIT test 1_000_PSI_mar15 18/12/2020 11:55 Page 1

PSI PRODUCT REVIEW 2021

PRODUCT TEST

MaxxOne M1P-IPC-080

DMM: Digital multi-meter and component tester.

Setup: Unit configuration.

A number of additional physical buttons are used to return to the main menu, set and activate full screen mode with a lower cluster for camera PTZ control.

Operation & performance

What’s in the box?

Test unit User manual Canvas carrying bag and shoulder strap Mains power supply / charger International power adaptors USB A to USB Micro B lead BNC to BNC lead 3.5mm jack to crocodile clip test lead 2-pin to crocodile clip test lead 5.5 to 4mm power jack lead Spare 2-pole telemetry connector Multi-meter test leads Flat RJ45 network lead Fibre-optic end adaptors Lanyard

Touch-screen control allows selection of a wide range of functions such as camera testing and set up, wireless network signal strength monitoring and multi-meter functions 32

T

his is a combination test unit for both analogue and IP CCTV systems. It is supplied with the essential test leads for configuration and analysis of the majority of installations. Its touch-screen control allows selection of a wide range of functions such as camera testing and set up, wireless network signal strength monitoring and multi-meter functions all in one compact unit. Two Li-Ion batteries are installed in the unit accessible at each side of the case rear. These are model DTBT3 with ratings of 7.4v 18.5 Wh. The manual states that these have no memory effect and can simply be recharged as required.

The unit is turned on or off by pressing the power button for more than two seconds. When turned on it displays the MaxxOne logo after approximately 8 seconds and then after 25 seconds the main menu appears.

Device options The unit is touchscreen operated and has the following screen icons: ONVIF Test: For network device discovery over network link or Wi-Fi. Analogue Camera: Displays camera video in CVI, TVI or AHD formats.

Network Tools: Identify devices on connected networks.

Wi-Fi / RF Tools: Signal identification, strength measurement and spectrum display.

Cable TDR test: Reflectance cable distance testing.

Playback: Replay recorded video clips and JPEG snapshots.

Data Monitor: To display telemetry data received.

Signal Generator: For SD, HD-CVI, HD-TVI, HDAHD or HDMI. Colour bar output and signal input.

OPM: Provides a measurement of received light level.

At first power-up it is necessary to set the time and date to suit your current time zone. This is by way of controls on the Setup (System Settings) screen. Plus and Minus on-screen buttons are provided for each element of the time and date.

Through this menu option, the auto power-off can be set and the Backlight level set along with inhibiting the keypad bleep tone. A Cancel and Save button are then used to set or ignore the changes. The backlight has a level from 1 to 10 with a default of 8. The Auto power-off is from 5 to 60 minutes in 5-minute steps or Disabled.

ONVIF Test – the Power & connections tab allows device IP settings to be entered. These are set for the two network ports and for the built-in Wi-Fi, as static addresses or DHCP. The first RJ45 port (Green) is up to 1Gb and can be used to identify the source voltage of PoE enabled connections, this reported 45.8V from a test switch port. This source can also be used to power the device and re-charges the internal batteries.

The second RJ45 port (Blue) is also 1Gb with PoE available of up to 25.5W. The display shows the output voltage of 48V and the power drawn from the port. PoE cameras can therefore be easily tested by directly connecting to the unit.

For cameras requiring a 12v feed the power demand via the power jack lead will be shown.

Both ports show the current download bandwidth if sending images and indicate any packet loss figure as a percentage with colour coded icons.

The Discover camera function will identify ONVIF compliant cameras on the local network segment along with manufacturer name. After entering the username and password a snapshot will be captured to show the field of view along with its details including resolution, frame rate, coding and model number.

The Analogue camera option accepts inputs from CVI, TVI and AHD formats and provides coax or 2-wire RS485 commands in a wide range of telemetry protocols and baud rates from 150 to 19,200. The 39 protocols on the test unit were largely Far Eastern and American but there are

www.psimagazine.co.uk

EDIT test 1_000_PSI_mar15 18/12/2020 11:56 Page 2

TEST

some old familiar ones such as Bosch, Molynx, Vicon and the three Pelco variants. For RS485, addressing and preset numbers from 0 to 255 can be selected.

Video and snapshots from the IP or Analogue cameras can be recorded onto the internal storage and replayed using the Playback option.

Both modes allow for windowed or full-screen display. Video is stored as .mkv files with a date and time prefix. Snapshots are stored as .jpg images.

Network tools includes settings for the device’s IP address, mask and gateway address with a DHCP option. There are three tabs for Ping, Sniff and List subnet. Ping runs a continuous ICMP request to a specified IP address until stopped and continuously graphs the results on screen.

Sniff identifies any broadcast packets from devices active on the network and can be useful for identifying unknown devices as they are added. List subnet scans the current subnet and identifies all devices present by MAC, IP address and response time.

The Network tools screen has a title of “Verkkotesti” so there is probably some additional cleaning-up of content required which will no doubt be handled by a future firmware update.

The Wi-Fi Tools section allows local Wi-Fi signals that are advertising their SSID to be identified. Graphic display of the 2.4 and 5GHz spectrums are shown with signal strengths and any connection details with an option to freeze the chart. The tester can be set as an access point if required with its own DHCP service.

The cable TDR test function gives readings in metres for each of the four pairs of the network cable. This test does not need an end terminator.

Results are said to be accurate to 1 metre on lengths up to 130 or 200 metres depending on cable type so should be adequate for most network cable runs. Results for an approximately 53 metre run of Cat5 gave a result of 51.6 metres so pretty accurate for a non-scientific test.

The OTDR test for fibre is a simple measurement of received light level for wavelengths of 850, 1300, 1310, 1490, 1550 or 1625 nm. This does require a third-party reference light source however and is for indication only rather than providing calibrated results. It was noted that the “Differential Measurement” button showed as “Media Relativa” so similar to the previous language error requiring an update.

A data monitor option receives and displays RS485 telemetry protocol data with baud rate and display width selectable.

The signal generator outputs a colour-bar signal in SD, HD-CVI, HD-TVI, HD-AHD or HDMI formats. Both PAL and NTSC are supported at 50

www.psimagazine.co.uk

and 60 hertz. Small windows show both the output image and any received input, so if a return path is available the output to input can be used to show path performance. The input can be taken to full screen using the SCR button.

The Digital Multi-meter functions are comprehensive with DC and AC voltage measurement up to 600V with auto-ranging and DC and AC current to 2A. Resistance has ranges from 2KΩ to 20MΩ. Capacitance ranges from 2nF to 20mF then finally a Diode and Conductivity function for simple device and continuity testing.

While these functions all worked well the variation of the 3 or 4 digits of the display after the decimal point did mean that some values, particularly for resistance could be difficult to read, however, an analogue pointer and history graph give a quick and longer-term view of results.

A Hold display function along with a temporary memory feature does allow results to be stored for analysis. The capacitance ranging was seen to switch between display suffixes so Pico Farad values may be shown as a fraction of micro Farads and micro Farads as milli Farads. As long as you can work out the relationship of these suffixes, the results are very good. The diode test shows the forward conduction voltage and can be used for conventional diodes and LEDs. Once video recordings or measurements have been stored on the device, you can enter USB disk mode to copy or move these to a PC. Video and meter information is stored in separate folders such as “cctv”, “DMMData”, “networkTest” and “OPMData” with screen grabs being in .png format and history measurements as .csv files for import into spreadsheets.

Double pressing the Power button will illuminate / extinguish 2 x 38 lumen white LEDs in the case top for local illumination.

The M1P-IPC-080 provides comprehensive test features and should limit the need to carry multiple test items to site

Conclusion The M1P-IPC-080 provides comprehensive test features and should limit the need to carry multiple test items to site.

The shoulder strap for the case and the lanyard for the device help with working in difficult locations.

The ability to directly power and interrogate PoE cameras in the field should save significant time in setting-up systems. Battery status is clearly shown on each of the screens so operational time is clear.

The ability to save snapshots or video from the camera directly or via the network would simplify the task of capturing images for Rotakin or NORMAN measurement purposes.

A very useful addition to the installation or commissioning engineer’s toolbox.

NOTE: This PSI Product Test was carried out by an independent third party, not editorial staff.

The manufacturer had no input in the review or the final result

9.0 out of 10 33

EDIT test 2_000_PSI_mar15 17/12/2020 17:31 Page 1

PSI PRODUCT REVIEW 2021

PRODUCT TEST

What’s in the box?

DVR Power supply unit Quick Guide

T

he OPDVR04-1TB DVR is a 4-channel analogue digital recorder from the Vista Optio range. It is compatible with cameras using CVI, AHD and TVI HD formats, CVBS or selected IP streams including ONVIF compatibility.

Monitor output is by VGA or HDMI connection.

This model includes two additional IP channels and is supplied with a 1TB “Purple” surveillance drive fitted, 2TB and 4TB options are available.

For larger systems an 8 channel (plus 4 IP) with 2, 4 or 8TB drive is available or 16 channel (plus 8 IP) with 4, 6, 8 or 10TB drives can be supplied. All IP channels are capable of supporting up to 8MP streams.

Getting started

Once configured, the DVR is intuitive to use if familiar with video recorders 34

The DVR is supplied with an external 12v DC power supply of the direct plug-in variety. The unit requires a mouse and optionally a network connection and once powered up after a short duration shows an Optio splash screen followed by a setup Wizard. This takes the user through a series of configuration items starting with the password, unlock pattern and password protection routines. The password must be between 8 and 32 characters and use at least two character types. A well-presented on-screen keyboard is used with mouse control to set the password and other text inputs. This changes to show the case of the characters and has a separate numeric keypad section making it very user friendly. Password strength is indicated by a coloured bar beneath the entry.

Three password reminder questions can be set, these are selected from a drop-down list of 6, 7 then 8 questions respectively.

An “Auto check for updates” option is then given. This appears to require the sending of device information to the supplier for verification purposes. This is followed by a General settings screen for Auto log-out timing and authorisation for monitoring of channels when logged out, Date

Optio - OPDVR04-1TB

& Time including NTP, Network configuration, P2P remote access, Encoding settings, Snapshot storage, Hard Disk overwrite and Scheduling options.

Operation Once configured, the DVR is intuitive to use if familiar with video recorders. The display initially shows a quad view and segments can be expanded to full screen with a left mouse button double-click. The right mouse button is used to call up the DVR’s on-screen quick menu that gives access to the main menu or step back to the previous screen or view.

Camera control is over coax using HDCVI commands or serial commands with a wide range of serial protocols and baud rates supported from the unit’s 2-wire RS485 port.

This is a very compact unit that supports just one SATA internal drive but can link to external storage if required. A small internal fan can be set to “Always On” or “Auto” but is extremely quiet in operation.

The 4 analogue inputs can be set up for Auto, CVI, AHD, CVBS, Other input or IP stream. Adding the additional 5th and 6th IP channels requires a re-boot and then these channels become available in the relevant menu options. An additional View 6 option is shown in the quick menu and displays as a large channel 1 image with the other 5 arranged clockwise around it.

Images can be moved around the segments to suit the preferred layout.

All menu items are context related so for example will only show the maximum available resolution for the connected camera in drop-down listings.

Menu options The quick menu options are for Main menu call, Search, File backup, PTZ, View 1, View 4, Previous

www.psimagazine.co.uk

EDIT test 2_000_PSI_mar15 17/12/2020 17:32 Page 2

PROFESSIONAL TEST

A well featured 4 + 2 channel compact HD analogue recorder with the capability to selectively be converted up to a 6 channel IP device Screen, Next Screen, Camera Registration, Manual (record & alarm output) Auto Focus, Colour Setting and Image.

The DVR’s main menu has the basic user feature icons at the top of the screen with configuration management feature icons below.

The top icons access the following functions: Video: view, search and play recordings Alarm: view, search and configure alarm actions Backup: search for and backup video files Display: configure resolution and display settings Audio: configure audio and import audio files The lower screen icons provide the following management functions: Camera: Image, Encode, Overlay, PTZ, Channel type, Registration, and Coaxial camera upgrade Network: TCP/IP, Connection, Wi-Fi, 3G/4G, PPPoE, DDNS, Email, UPnP, SNMP, Multicast, Register, Alarm Centre and P2P. Storage: Overwrite & auto delete, Scheduling, HDD Manager, HDD Detect, Recording estimate, FTP System: General, Security, System Maintenance, Import/Export, Default, Upgrade Account: Users, Groups and ONVIF Users Info: Version, Log, Event, Network, HDD, Channel Information and BPS The BPS option shows the individual channels bandwidth demand in kilobits per second with a small graphical representation over time.

Performance Navigation around the quick and main menus is very effective to access all features. Linking to the unit via a network browser gives access to all the key menu features and configuration. On live view from the quad view selecting a segment will show that as a full screen and if selected again gives a full-screen view of the channel, a further selection returns to the quad view.

Compatible cameras can be controlled and configured from the PTZ sub-menu.

The playback system is supported by a very good transport mechanism. This has the following controls beneath the display window;

www.psimagazine.co.uk

Play Forward / Pause, Stop, Play Backward / Pause, Previous Frame, Next Frame, Slow Playback, Fast Playback, Previous Day and Next Day. Slow Playback speed is selected from x1/2, x1/4, x1/8 and x1/16. Fast Playback is x2, x4, x8 and x16.

Volume, Smart Search, Snapshot, Add Mark are followed by Video Clip start and end selection times and a backup command for saving to a USB device. The Smart search feature can use General, Alarm or Motion, with motion detection being set with an on-screen selection grid for selecting an area of interest if required.

The timeline is well laid out and can display a period of 24, 2, 1 hour or 30 minutes. It clearly indicates the replay time and shows other times below the mouse pointer, making selection of exact times very easy.

To the right of the replay screen is a recording source selector, a Calendar and a Camera selector. Cameras can be synchronised for playback or run with separate time references.

A good level of system security is provided including Network Access White and Black lists to limit the large number of connections possible.

Conclusion A well featured 4 + 2 channel compact HD analogue recorder with the capability to selectively be converted up to a 6 channel IP device. Extremely clear playback facilities make event review a simple task.

9.0 out of 10

NOTE: This PSI Product Test was carried out by an independent third party, not editorial staff.

The manufacturer had no input in the review or the final result

35

EDIT test 3_000_PSI_mar15 17/12/2020 17:38 Page 1

PSI PRODUCT REVIEW 2021

PRODUCT TEST

What’s in the box?

Dome camera assembly Top mounting plate Wall bracket with gasket and securing screws Heavy duty wall fixings Steel safety lanyard Power supply IEC type 15 to Euro type “F” power lead Allen key RJ45 waterproofing cover Insulating tape Pair of gloves Installation guide and legal information

36

T

he DH-SDT-5X225-2F-WA-0600 is promoted as a 2MP Starlight IR Dual PTZ external network camera. It is from the Dahua WizMind range and is based on 2 x 1/2.8” CMOS sensors, one with a wide angle view and one with a 25x optical zoom lens. “Deep Learning algorithms” are used to support detection functions such as smart tracking of vehicles or humans with automatic filtering of false alarms.

A sticker in the accessories pack provides a QR code and web address for Manuals and Downloads.

Dahua DH-SDT-5X225-2F-WA-0600 European “Schuko” mains plug to the notched (Type 15) IEC connector (kettle type) so a standard IEC equipment lead couldn’t be used. So, if an adaptor is not available you may need to replace the mains plug.

The dome is relatively heavy at around 9kg so must be handled with care, especially as the lower dome rotates freely when unpowered. With the Wall bracket firmly fixed in place, the dome’s top plate is secured to this using the 3 Allen securing screws that are provided along with the mounting gasket in a bag within the bracket.

Although the top of the plate appears at first to be threaded it is simply pushed up into the bracket and the screws then locate into its central channel to hold it in place. The dome assembly can then be hooked onto a hinged bar on the top plate. The lanyard at this stage is fitted between the bracket and the dome to provide an additional level of security against dropping. With the dome hooked in place there is ample space for making off the connections for the network, power, and any auxiliaries such as alarms and audio. Once completed the dome is raised up and secured to the top plate with 4 captive Allen bolts.

Once powered-up the dome runs through a short power-up and position calibration routine. A default IP address of 192.168.1.108 is used and DHCP is disabled. Initial setup is performed using a web browser or the Config tool from the Dahua website. At first connection a strong password is enforced before commencing, with an option to enter an e-mail address for a password recovery process. Further options are available for P2P connectivity and auto-check for updates of firmware.

A Micro SD card of up to 256GB can be fitted for local storage. This is accessed at the rear of the dome and can be exchanged while in situ.

However, the cover plate which has two captive crosshead screws securing it, is not tied to the dome so it and its waterproofing seal may dislodge, so this operation must be handled carefully. Video files are stored in .dav format and can be reviewed using the Dahua Smart Player software.

The dome is supplied with a wall-mount bracket, but ceiling and pole mount options are available.

Getting started

Operation

The camera is High Power PoE capable (40W max) or can be fed from the supplied 36-volt 2.23A power supply unit. The supplied lead was a

This is an unusual arrangement in that the dome has two elements to consider, firstly in the upper section a “Panorama” camera that has a fixed www.psimagazine.co.uk

EDIT test 3_000_PSI_mar15 17/12/2020 17:40 Page 2

TEST

wide-angle lens with a 30° Tilt range that has continuous 360° rotation. The lower section has a more conventional dome appearance with a “Detail” camera fitted with a 25x zoom lens that can tilt from +10° to -90° from horizontal and with a pan range of 250°. This means that the Detail camera can be panned 125° either side of the vertical centre of the Panorama camera’s view.

The Panorama camera’s horizontal field of view is 53.7° and vertical is 28.7°. So this camera can view down to approximately 45° which suits its requirement to provide a perimeter overview. The Detail camera can view from above the horizon to directly below the camera so can be used to fully track subjects. An auto-flip function is included.

The browser live view shows both images by default as a PiP (picture in picture), the bandwidth of each is shown in the top left corner with the resolution at the right. Tabs along the top are for selecting Live, Playback, Setting, Alarm and Logout. Icons above the image window select; Manual Position, Regional Focus, Relay Out, Digital Zoom, Snapshot, Triple Snapshot, Record, Audio and Talk. To the right of the live window is a PTZ control block with speed selection; lens controls appear when the Detail camera is selected. Below this are additional PTZ Functions for Scan, Preset, Tour, Pattern, Pan, Assistant and Go To (specific coordinates).

Icons below the live window select; Image Adjustment, Full Screen, Aspect ratio, Fluency, Rules Info, PTZ, Anti-Aliasing and picture display (Split screen, Individual, Quad or PiP formats).

Mouse control can be used for Pan and Tilt dragging on images and the detail camera allows a box selection for zooming in to a selected area.

The website provides a 26 page “Installation Manual” for the Speed Dome, though this largely covers cable types and connection details, but it does give good lightning protection information and Cybersecurity recommendations. The 190 page “User’s Manual” is rather generic and doesn’t give sufficient overview detail on optimising the relationship between the two cameras’ settings.

Additional tools are available for download including a Configuration Tool for device discovery and initialisation, a Smart Player for replay of video files and a Smart PSS that provides “small batch” video management and storage.

The cameras have an Auto-Reboot feature that was set to activate every Friday at 04:53, but this can be changed or inhibited in the System submenu. Apps are available for iOS and Android with simple QR code configuration for mobile connections.

Performance Both cameras have high sensitivity, performing to the level of typical “Starlight” type sensors. As is www.psimagazine.co.uk

often now the case an absurdly low minimum illumination figure of 0.005 Lux colour and 0.0005 lux B/W is stated with no validation. The wide dynamic range is good at a stated 120dB and has the advantage of a slider setting to vary the amount required for the scene.

The dome has four infrared LED sources and four white light LEDs. The white LEDs are categorised as Near and Far with either pair capable of being varied from 0 to 100% or if both used a maximum of 100% split between the two pairs. The infrared LEDs are controlled on a Smart IR basis relative to zoom position. The visible light has a range of up to 30 metres and the infrared is rated up to 100 metres.

The zoom lens with a focal length of 4.8mm to 120mm gives a horizontal field of view of 59.6° to 4.8°. DORI distances are given in the datasheet.

Preset position calling is extremely precise with a pan accuracy of better than 0.05° measured. Pan preset speed is up to 242°/s for the Panorama and 430°/s for the Detail camera.

300 presets can be allocated and named.

Each camera has a Main stream with a resolution of 1920 x1080, 1280 x 960 or 1280 x 720 and a Sub stream that can be set to D1 (704 x 576) or CIF (352 x 288). Streams were set to CBR (Constant Bit Rate) by default but these can be changed to Variable for reduced bandwidth on most scenes.

Conclusion An interesting ONVIF compliant dome with high sensitivity and capable of tracking subjects while still maintaining an overview of the scene of interest. Good differentiation of targets to track Humans and / or Vehicles while preventing false alarms. With both infrared and white light for discrete or overt observation.

NOTE: This PSI Product Test was carried out by an independent third party, not editorial staff.

The manufacturer had no input in the review or the final result

An interesting ONVIF compliant dome with high sensitivity and capable of tracking subjects while still maintaining an overview of the scene of interest

8.0 out of 10 37

EDIT test 4_000_PSI_mar15 17/12/2020 17:45 Page 1

PSI PRODUCT REVIEW 2021

PRODUCT TEST

be fed through a relatively small hole (19.6 mm diameter) in the base, so cable types must be chosen carefully to allow access if all functions including alarm and audio are used. Three connectors are used for external connections; a three pole for 24v AC power, a six pole for the audio input, output and CVBS output, and a fifteen pole for 8x alarm inputs and 2x alarm outputs. The dome fixes onto the top plate by aligning a notch on the body to ensure mating of the 25 way connector and then a slight turn to lock the dome in place. It was felt that the “Lock” word above the notches was confusing as it appeared to suggest an incorrect rotation. Three captive hex screws are then fastened to secure the dome in place. A clipped lanyard is then used to connect to the mounting bracket to provide additional protection.

A range of optional wall, corner, pendant and pole mounting brackets can be supplied.

What’s in the box?

Dome assembly Top plate Mounting adaptor Allen wrench Ferrite core Connectors (3, 6 and 15 way) Waterproofing items Quick guide

Operation

T

he DC-S6283HRXL dome is an external IP66, IK10 rated, 1/2” CMOS 2MP Lightmaster PTZ ONVIF compliant dome with 36 times zoom lens and long range IR capability.

Getting started

The event set up is relatively simple to configure with a good range of options for a PTZ camera. The auto-tracking of subjects is particularly easy to set up 38

IDIS - DC-S6283HRXL

The camera must be powered from a High Power PoE source capable of supplying 75W or the supplied 24v AC power supply. This power supply was fitted with a 2-pin Europlug for mains connection and a flying lead for the 24v AC output. The 24v supply is rated to 4.5A. Much of this power demand relates to the internal heater as the specification sheet gives an operational PoE demand of 27.9W without the heater active and 55.2W with it on.

Not the easiest of items to deal with as it weighs over 7kg and is supplied without a mounting bracket. The collar and mounting adaptor are quite small so handling can be problematic if setting-up in a workshop environment.

Connections are made into the top plate onto a pcb under a fold-down plastic cover that includes the 25-way “D” type connector used for all interconnections with the dome. The cables must

When powered, the dome runs through a calibration routine to establish its datum points.

Once complete the dome leaves its camera looking straight down but this can be replaced with a move to a Home setting during configuration taken from one of the 256 preset positions available.

If connecting to the camera with a web browser (DHCP is set by default), you are prompted to run the IDIS WebGuard software before continuing. At first connection you are unable to access the camera as there needs to be a unique password set. This must be set using the IDIS Discovery software that is downloaded from their website, though the supplied Quick Guide is not clear on this. Once discovered the individual camera can be managed and a password set for the administrator level user. This password must be 8 to 16 characters long and include three character types.

Ideally, when used with an IDIS DirectIP NVR the setup is simplified.

From the Live browser window, a Remote Setup icon loads a configuration page following entry of the camera’s login password. The Live page stays active so any changes can be immediately viewed once saved.

Initially the time was displaying the U.S. Eastern time zone of GMT -5 hours with the date shown in year, month, date format. The date format could not be changed from this to either UK or USA convention. It was assumed this may be

www.psimagazine.co.uk

EDIT test 4_000_PSI_mar15 17/12/2020 17:46 Page 2

due to the firmware being an early version as this was reporting as v1.1.1 (November 2019) but downloading the latest 1.1.2 version (July 2020) from the website and uploading this to the dome still did not allow the date format to be changed.

Time setting however was easily updated and set to an external time reference.

The camera has a good dynamic range, and this can be further electronically enhanced.

Up to four video streams can be configured.

Edge storage and Smart failover being provided using a micro SD card of up to 256GB. The cardholder and a factory reset switch are readily accessed beneath a small cover plate.

Two-way audio is supported along with storage of pre-recorded alarm messages.

Black & White Mode and the IR cut filter are independently selectable or can be set to Automatic or scheduled to suit the application.

An image stabilizer is available, this is of the electronic variety and so removes approximately 10% of the screen height and width when used. As long as a sturdy mount is provided, this feature should not be necessary.

Menu options The set-up menu window is simply laid out with the following options down the left hand side of the display: Quick Setup: - basic setup options for Language, Name, Date & Time, Network addressing, Video & Audio streams.

System: - general settings and import / export, Date & Time and User Group settings.

Network: - IP, FEN (mDNS), Port & QoS, Bandwidth control, Security, IEEE802.1x.

Video: - Camera settings, Streams, Webcasting, MAT (Motion Adaptive Transmission), Privacy Masking and PTZ settings.

Audio: - Input / Output, Codec type, enabling and volume settings.

Event Actions: - Alarm Out, E-mail, Remote callback, Audio alarm messages, FTP upload and Record.

Event: - Alarm In, Motion Detection, Trip Zone, Audio Detection, Tampering, Auto Tracking and System Events.

Each of the menu options begin with an Overview page showing the current settings for that selection. Most changes require a Save to enable the change.

Performance The 36x zoom lens has a range of 6 to 216mm giving a horizontal field of view of 59° to 2.04° and vertical of 39° to 1.04°. The use of a flat window in front of the lens ensures there is no additional

www.psimagazine.co.uk

image distortion. Auto-focus is good and can be manually overridden if required. For night vision the unit has two infrared emitters, mounted behind lenses to the side of the optical lens, a light sensor is mounted on the front panel for switching level. A motorised racking system allows the IR to track the zoom position to provide a highly concentrated IR beam when in telephoto mode. The specification states a 350 metre IR range and illumination of a subject at 250 metres was readily observed in testing.

Both Pan and Tilt speed are variable from 0.02 to 240°/sec with preset calls at up to 360°/sec.

Zoom related proportional speed allows good control when zoomed in.

Good resolution is obtained from the 1920 x 1080 (16:9) sensor and colour sensitivity is good with a stated figure of 0.1 lux but monochrome mode would normally be entered way above that level.

The event set up is relatively simple to configure with a good range of options for a PTZ camera. The auto-tracking of subjects is particularly easy to set up but can be confused by vegetation so care must be taken to ensure the observed scene is clear.

Up to eight privacy zones can be set and these track well with camera and lens position.

Remote connection Apps are available for both Android and iOS devices.

The defog feature was found to work well with low-contrast night scenes, enhancing the image detail.

Motion Adaptive Transmission can be implemented to reduce the frame rate until scene motion is detected; this significantly improves storage efficiency.

Conclusion A well featured PTZ dome with simple setup, excellent optical performance and enhanced IR illumination.

A well featured PTZ dome with simple setup, excellent optical performance and enhanced IR illumination

8.0 out of 10 NOTE: This PSI Product Test was carried out by an independent third party, not editorial staff.

The manufacturer had no input in the review or the final result

39

EDIT test 5_000_PSI_mar15 17/12/2020 17:51 Page 1

PSI PRODUCT REVIEW 2021

PRODUCT TEST Zyxel - GS1350-6HP

What’s in the box?

Network switch Power supply European (Type F to IEC) power lead Quick-Start guide Warranty, Safety & Conformance documents Screws and wall-fixings

T

he Zyxel GS1350-6HP is a “Smart Managed Switch for Surveillance” with hardware and software designed specifically for surveillance camera use. This 6-port version has five PoE enabled ports and one SFP socket. All ports support up to 1Gb data rate with a 12Gb/s switching capacity and a 60-Watt PoE budget. 8, 16 and 24 port versions are available, each with 2 SFP sockets and PoE power of 130W, 250W and 375W respectively.

Getting started

The real benefits of this switch become clear when you connect and configure it using a web browser 40

The supplied Quick Start Guide provides basic connection details and suggests downloading a network utility called ZON for ease of network discovery and initial access to the device. A default IP address of 192.168.1.1 is set but DHCP is enabled so the address should not clash if connected to an existing network using this subnet. The supplied 55 volt 1.3 Amp power supply feeds the unit, on the front are the five main RJ45 ports and an SFP socket for an optional wired or fibre uplink module. It is strongly advised to connect a valid ground cable to the M4 ground screw on the rear of the unit before connecting network cables. Once powered, simply plugging network devices in will allow immediate communication.

The Zyxel website has a number of additional documents that users should download; these include, along with the usual Data Sheet and 2page Quick Start Guide, an 83-page Handbook and a more detailed 343-page User’s Guide. The handbook describes the majority of functions

within the switch and has helpful test methods included, so should provide much of the information required, the User’s Guide gives greater details.

Operation The real benefits of this switch become clear when you connect and configure it using a web browser. The initial page requests the Administrator username and password. The default password is a simple 4 digit code and changing is not forced but reminders are given at every login if it is not altered. As this device is aimed at the security market it would perhaps be advisable to enforce a change to a “Hard” password at first use.

Along the top right of the browser window are lined up quick access buttons for Refresh, Save, Status, Wizard, Logout and Help. The Wizard can be used to quickly change the password and SNMP community name and gives access to some basic port protection, VLAN and QoS settings.

Unlike security industry products, it is a feature of many managed switches that settings are stored in run-time memory and selecting “Apply” after any configuration changes only saves to volatile storage. It is therefore essential to use the above “Save” button to store these changes into non-volatile memory so they will be recovered after power down and re-start or reboot. This includes basic password and Time & Date settings.

One of the key features of this switch range is its ability to maintain camera PoE supply even during switch firmware uploads and re-boot. As www.psimagazine.co.uk

EDIT test 5_000_PSI_mar15 17/12/2020 17:51 Page 2

TEST

long as connected cameras have internal storage and are configured to synchronise recordings when LAN communication is restored there should be no loss of recording. Additionally, the ports can be configured to monitor the connected cameras so that any device loss can be detected.

This can be by LLDP (Link Layer Discovery Protocol) monitoring or using periodic PING commands from the ports with timing intervals to suit the application. On detection of such a camera signal loss, the port can be automatically power cycled to attempt to re-start the camera.

The number of attempts and delay duration are selectable, as is the timing and method of alerting a system administrator to the failure.

Menu options The switch allows the user to use a Basic or Advanced menu set and the menu tree is arranged at the left of the main browser window.

The Priority Queue Assignment allows individual ports to have different priority levels from 0 to 7, this allows data such as video, if more critical, to be prioritised if there is network congestion. The queueing method is selectable in the Advanced options as strictly priority or two weighted options, Fair Queueing and Round Robin.

The Zyxel Nebula Cloud Management allows remote management of multiple sites with a free software version and a more comprehensive feebased option available.

The diagnostic screen allows PING and Traceroute testing and in addition to testing ports, gives cable distance measurements with distance to fault if pairs are open or short circuit.

Performance The switch has a very wide range of configuration options and rules, some of which may be unfamiliar to those without a networking background, however, the help files available through the browser interface along with the comprehensive documentation from the Zyxel website give good explanations of each option.

Some of the available features and menu options may appear less appropriate to a six-port

switch but do ensure that this device can be used as part of a very secure elaborate network design and can be used to develop a more secure network strategy.

An extended distance mode is available on the ports, this drops the maximum data rate to 10Mb/s but increases the effective range from 100 metres to up to 250 metres depending on cable type.

PD (Powered Device) monitoring, which in most security installations would be a camera or access device connection means that there is a continual monitoring of the device being online.

This can either be by monitoring LLDP data or using PING commands, with the number of PINGs and repetition time all user selectable.

Camera restarting can then be triggered by turning off and then restoring the PoE power to the specific port where the error has occurred.

Suitable notifications can then be logged and / or sent to system administrators.

RSTP support allows dual path redundancy to be used where more robust network connections are necessary.

The various status and information pages provide a large amount of useful diagnostic information. The ability to mirror port information allows for selected data to be copied to a port for analysis of either received, transmitted or both sets of packets.

Scheduling is possible using the Time Range option, this is based on named time periods and can be for a specific duration between two dates and times or repeated for times within days of the week. This could be used for example to turn the PoE of a port on only during certain hours of the day. However, it isn’t clear why the date selection goes back to 1970 on the long drop-down date selector scroll bars as the default date at powerup starts at a more sensible 2016.

A very well featured security industry network switch with specialised surveillance features, that allows a high degree of network security

Conclusion A very well featured security industry network switch with specialised surveillance features, that allows a high degree of network security and remote management when suitably configured.

NOTE: This PSI Product Test was carried out by an independent third party, not editorial staff.

The manufacturer had no input in the review or the final result

9.5 out of 10 www.psimagazine.co.uk

41

EDIT Open Door Jan21_PSI_may15 17/12/2020 14:30 Page 1

Grow your dealership with a cloudbased security platform Enjoy a closer customer relationship and recurring monthly revenues In today’s rapidly evolving marketplace, if you’re a dealer or an installer in the security sector, you’re probably facing several difficult challenges. The first of these lies in finding the best way to streamline and consolidate your business. To ensure future success, you might also need to grow your business and develop a stronger, long-term relationship with your customers wherever possible. However, an increasing number of your customers are likely to be young, tech-savvy business owners who are looking for simple, instant security solutions that can be easily updated.

You’re therefore likely to be facing growing demands for these types of solutions, and you will need to offer a better alternative than the DIY solutions that are readily available and are flooding the market. A cloud-based security platform not only meets this need but will also enable you to manage your customers’ requirements and systems more effectively. This will make you more proactive and will increase the opportunities for recurring monthly revenues (RMR).

This is why at Honeywell, we’ve been investing heavily in our own cloud-based security solution, which offers a range of benefits to both dealers and end users.

Our new MAXPRO Cloud platform makes life easier for your customers because it enables them to manage the security of multiple sites via the cloud – from wherever they are. But for dealers and installers, the beauty of this solution is that it provides a useful route towards healthy future growth. For more visit: mymaxprocloud.eu/MPC/Signin

Strategic focus on cyber security for Inner Range Security system manufacturer Inner Range is announcing a new strategic focus on cyber security, after auditing and formalising several existing cyber security measures.

The award-winning firm, which has not had a single reported cyber security breach in its 30-year history, has been working with a leading global software service company to develop a comprehensive cyber security governance program that can grow and evolve to meet ever-changing cyber security challenges.

The new program includes: • A dedicated cross-functional cyber security governance team • Coordinated penetration testing of all networked products by independent accredited laboratories • Product development process that includes cyber threat assessment • Deployment of hardened cybersecurity technologies • Supply of cyber hardening installation guidelines for Inner Range products Tim Northwood, general manager of Inner Range, said: “Cyber security is one of the major challenges facing organisations today and it’s critical that networked security and access control systems provide customers with the safest possible solution.

“Our new program shows our absolute commitment to cyber security, not as a ‘extra’ level of security but as a core element running through every stage of the design, manufacture, installation and management of our security systems.”

Visit: www.innerrange.co.uk

42

www.psimagazine.co.uk

EDIT Open Door Jan21_PSI_may15 17/12/2020 14:32 Page 2

Open Door is an online service from PSI that provides in-depth information from a selection of market leading companies. Here are some of the highlights from the pages of Open Door.....

Putting all of Texecom’s information at your fingertips With the TexecomPro App installers have access to the very latest product information at the touch of a button. Easy access to product information with keyword searches, intuitive menus and built-in barcode scanning. Features include: Manuals - Product information and instructions will be accessed by simply scanning the QR code on the product, which will instantly call up all the relevant information.

News - Users will be able to keep up to date with all the latest news, with real-time updates from Texecom, whether it is new product launches, software updates, interesting case studies, ‘how to’ guides or blog posts.

Favourites - Documents such as product manuals, guides and technical bulletins can be saved as favourites, making access to them even easier.

Forum Access - Texecom’s Forum is an essential tool for security installers.

Training Access - Users can easily see what training courses are coming up and even book a place. A range of useful quick-start guides and video tutorials will also be available.

Visit: www.texecompro.com

Bosch extends interpretation product lineup in its IP-based conference system portfolio The new DICENTIS Flush language selector from Bosch is a user-friendly solution for multi-lingual meetings where simultaneous interpretation is required. This launch extends the interpretation product lineup in the Bosch IP-based conference system portfolio.

The intuitive language selector serves passive listeners such as meeting delegates or journalists, making it an ideal choice for parliaments and international conventions and events.

Visit: www.boschsecurity.com/gb/en/

IDIS Video tech drives patient welfare at Hampshire care centre A national centre of excellence for children and young people with mental health needs has been secured by a comprehensive security system from IDIS. The £7 million refurbishment of Austen House, a 14-bed forensic hospital in Hampshire run by Southern Health NHS Foundation Trust, prioritised keeping both staff and patients safe from harm, given their specialised needs.

Working with main contractor Kier Construction, ISD Tech and IDIS replaced an outdated security setup with an affordable cybersecure system which is easy to operate and maintain.

Almost 100 IDIS 12MP Super Fisheye cameras, plus a mix of 5MP bullet and PTZ cameras, connected to 32-channel NVRs guarantee evidentialstandard video coverage with a 360º view of all communal areas, a choice of 6 view modes and the ability to dewarp footage after the event.

For more visit: www.idisglobal.com

www.psimagazine.co.uk

43

Nailed_Layout 1 27/10/2020 14:03 Page 1

What’s so good about PSI Magazine?

Do you want to target security installers with your next marketing campaign? Here are some handy points to consider: PSI is the only UK magazine aimed solely at the installers/integrators of electronic security technology PSI is the only UK magazine that carries independent, third-party product testing PSI was the first UK security magazine to launch a regular podcast PSI interviews NSI Gold approved security installers to promote excellence PSI is the host of the Premier Awards, recognising innovation and contribution to the industry PSI has targeted advertising campaigns that include print, online, podcasts, e-blasts and social media PSI was the first magazine to launch an Open Door programme giving advertisers control over their online presence on the PSI website

From our own research we discovered that: Two thirds of PSI readers claim to have been influenced by the magazine when it comes to purchasing decisions Almost 40% of installers that read PSI do not regularly read any other UK security magazine

November 2020 – £4.00

These are just a few of the reasons why PSI (Professional Security Installer) is the best platform for you to promote to security installers. And we didn’t even mention the PSI Golf Day!

@psimagazine

www.psimagazine.co.uk

Professional Security Installer

MEET THE INSTALLER Iain Stringer of Synectics Security

PSI PREMIER AWARDS 2020 The winners are announced!

PRODUCT TEST Camect Camera Hub

If you want to reach installers, PSI should be your first choice Contact David Lewis on 0208 295 8309 | david.lewis@proactivpubs.co.uk

EDITOR’S CHOICE A look at the best new products

psimagazine.co.uk

FACING THE FUTURE How 2020 could change the security industry