1 minute read
Lexmark Imaging Unit?
If the imaging unit is low on toner, it should be replaced soon. These guidelines provide instructions for replacing the imaging unit on Lexmark MX317DN printers (for reference).
● Open the printer's front door and pull the green handle to remove the toner cartridge. Then set it aside.
Advertisement
● Remove the existing imaging unit from the printer.
● Unpack the new imaging unit and insert it into the appropriate slot.
● Put the toner cartridge back into its holder
● When the green light on your printer stops blinking, you can start using the printer.
How To Reset Lexmark Imaging Unit?
● With the printer turned on, open its front door.
● Press the X (Cancel) button on the printer control panel.
● After a few seconds, the lights on the printer display will flash.
● When you see the message "Resetting Counters," release the X (Cancel) button.
● Close the printer's front door.
● The Lexmark printer's imaging unit resets, and the printer automatically turns on.
● If the printer does not turn on, press the power button to turn it on.
Note: If you want to discover everything about Lexmark printers’ maintenance kit, click here
