HP LaserJet Pro MFP M29w — First Time Setup

Have you bought the new HP LaserJet Pro MFP M29w printer for your office needs and are looking for the right way to set it up? Yes? Then fortunately, you have reached the right page for it. Setting up a new printer for the first time is not a big deal. Begin the setup with unpacking. After completely unpacking your printer, perform the setup tasks one by one. Finally, install the printer on your computer or smartphone to complete the setup. It is that simple. It's okay if this is your first experience setting up the printer. We will guide you throughout the HP LaserJet Pro MFP M29w setup. Follow the instructions below to set up your printer in no time.

● Remove all the packing materials without leaving a single piece of paper on your printer.

● The toner cartridge of this printer is pre-installed. However, it is packed. So, when you unpack the printer, remember to remove the sealing tape and clips from the cartridge as well.

● Have you finished with the unpacking? Yes? Then, place the printer on a neat, stable surface and closer to an electrical outlet.

● Now we can load paper into the input tray This printer's input tray can hold up to 150 sheets of paper and supports different media types.

● So, before loading paper, choose the right and compatible media type from the suggested list for your printing and copying needs.

● After preparing the paper, load the paper with the short edge facing forward and the print side facing up into the tray.

● Ensure that the loaded papers are manageable. All right there? Yes? Good, there are only a few more steps left to complete the printer setup. Let's finish them as fast as possible.

● Switch on your printer. Connect the power cord (shipped with the printer) directly from the printer's inlet to your electrical outlet.

● Press the power button (which is below the attention light and the supplies light) to turn on the printer

● Before going to the next step of the HP LaserJet Pro MFP M29w setup, wait for all the lights on the printer's control panel to become stable and silent.

● Once the lights stop flashing, you can confirm that the printer is stable and ready to be installed on your computer or smartphone.

● Use the printer software or the HP Smart app to install the printer on your computer or smartphone. (Go ahead and read the sections below to learn about the driver installation, Wi-Fi setup, and the USB cable).

You made it. Congratulations on completing the HP LaserJet Pro MFP M29w setup.

Do you want to access your printer remotely? Are you looking to set up your laser printer on a smartphone or computer over a wireless network? Are you wondering how to perform the HP LaserJet Pro MFP M29w wireless setup without a Wi-Fi router? If yes, then read this section thoroughly to get answers for all your questions. The HP LaserJet Pro MFP M29w printer is a wireless-enabled one that can be set up and accessed on your computer or smartphone wirelessly using the WPS method, the printer software, and the HP Smart app. Is this your first experience setting up the printer for wireless communication? Yes? Don't worry. We have your back covered. We have provided all the methods that help you perform the Wi-Fi setup effortlessly, quickly, and, most importantly, without error. So, are you ready? Let's get started!

First Things First

The Wi-Fi setup procedure is straightforward. If this is your first time configuring Wi-Fi in the printer, you may encounter an issue. Don't worry. You can avoid them by preparing the devices for the Wi-Fi setup. Before we kick off, prepare the devices for the Wi-Fi setup by following the instructions below

● Switch on your wireless router, computer, or smartphone, and the printer if necessary.

● Place your printer, router, and computer closer.