Landscape Contractor May - June 2023

SUBSCRIBE FOR YOUR CHANCE TO WIN A HUSQVARNA 580BTS BLOWER VALUED AT $1199 RRP

$7.95 inc GST May/June 2023

OptimusZ Latin for ‘The Best’

TEST DRIVE:  Cub Cadet Pro Z 560 S CASE STUDIES  Ditch Witch SK900  LiuGong 9027F ZTS

EQUIPMENT AND PRODUCT REVIEWS:  Mowing equipment  Mini excavators  Chainsaws and pruning

Your Complete Steel Edging Solution

Picture: Groundswell Landscape Design

Picture:

DIY installation

We make custom rings!

Seamless connections & corners!

Picture: Vivid Green Landscaping

Picture:

Wiley & Co.

Create any shape you can imagine!

Stays in shape with guaranteed results.

Multiple heights, gauges & finishes.

Delivery Australia wide.

GUARANTEED FOR

~10 YEARS~ Structural Guarantee See website for T & C’s

Get those old edges replaced! 1800 959 982

Welcome

Firmly converted to the electric lifestyle, both indoors and out.

See the GREENWORKS range on page 30.

From the editor

H

ello again!

Battery power is going to replace the internal combustion engine in outdoor power equipment. I don’t believe there’s any doubt of that.

And although I’m slow to accept new trends – I’m still not convinced I need to learn how to use an ATM – I’ve recently begun my journey into electric OPE, and it’s not been an easy road.

The story began with the outlawing of twostroke mowers. I have a very steep section which needs mowing two or three times a week in summer and once every two or three weeks in winter. After several four-stroke mowers died ugly, oil-starved, screaming deaths on that incline, the young fella at the mower shop put me onto a two-stroke and life was good. It was louder and a little fumier than the four-bangers, but it weighed heaps less and slashed through heavy grass, chew toys, garden hoses and even one time a cunningly concealed lamb-shank bone without even trying.

But all good things must come to an end, and recently the ’stroker went through that final transfer port which awaits all mechanical systems and was consigned to the scrapmetal heap.

Because I’m all about the environment an’ that, and I can’t buy a two-stroke any more, I decided it was high time I went for an electric outfit. I needed a new line trimmer as well, and there was a deal at the mower shop where I could get both at a great price, so I grabbed the package and bolted.

In no time at all I was standing tall and proud with my 60-volt arsenal, ready to kick grass.

That’s where things became interesting.

I’d done plenty of research and was ready for how quiet the units would be – very – and how I’d be operating with zero emissions – absolutely none – and how my sessions would be vibration-free – smoooove. I was a little sceptical about the mower-shop-guy’s claim, “If you have solar, you even get the charge for free!” (I don’t know about the economics of running a mower shop, but when I looked into the cost of solar at home it wasn’t going to be providing anything free for a decade or so). I was also interested in the claims of ‘no maintenance’ which I’d read so often.

It’s early days yet, but it does seem all those benefits are there.

But the most important factor for me is grunt. If the mower and line trimmer didn’t

Magazine deadlines Jul/Aug 2023 Sept/Oct 2023 Nov/Dec 2023

Deadline May 25, 2023 Deadline July 25, 2023 Deadline Sept 25, 2023

have the muscle I needed, the rest of it didn’t matter. But both do. The mower is self-driven, which I don’t really need, but was fun when the dog sought revenge for the lamb-shank bone and I had some clear ground in front of me, and the line trimmer is bordering on scary – and that was before I discovered both the line trimmer and mower had ‘turbo’ buttons.

Lawks-a-lordy! I’m still trembling at the way things got out of hand when I set loose that missile-load of flailing destruction!

But what really amazed me about the whole exercise was what the marketing departments didn’t really make clear: how easy the battery-powered gear is to live with.

Seriously, if you haven’t experienced how pleasant it is to not have to mess about with fuel, oil, pull starts, air filters, fuel filters and the myriad other little bits and pieces that go with small-bore motors, you’re being a fool to yourself and a burden to others.

I’m firmly converted to the electric lifestyle, both indoors and out. Like it or not, you soon will be, too.

I’m betting when you embrace the new situation you’ll be as big a fan as I am.

Tom Foster Editor

SUBSCRIBE NOW AND ENTER THE DRAW TO WIN A Husqvarna 580BTS Backpack valued at $1199 RRP inc GST

www.landscapecontractor.com.au

3

Contents

Features 08. Planter boxes and garden edging 14. Xeriscapes 20. Layer upon layer 30. On the cover: GREENWORKS

36

Regulars 06. Business And Finance 50. Innovative Products 58. Subscribe Now 59. Landscape Manager 78. Eye On The Industry 94. Association News

40

Equipment and Product Reviews 32. Case study: Ditch Witch SK900 36. Case study: Liugong 9027F ZTS 40. Mini excavators 64. Mowing Equipment

74

74. Chainsaws and pruning

Test Drives

CONTRIBUTORS

60. Cub Cadet PRO Z 560 S

4

The Ditch Witch SK900 with new high torque ground drive motors punches well above its weight.

92

John Gabriele John has more than 23 years’ experience in the horticulture industry. He is a member of the Nursery Garden Industry Association and the Horticulture Media Association. John has presented garden talkback radio at ABC 97.3FM and works as head teacher of Horticulture with TAFE NSW Illawarra Institute Yallah Campus.

LANDSCAPE CONTRACTOR

Anna Turner Anna is an expert in landscape construction, estimating and business management, with over 20 years’ experience in the industry, working in both the residential and commercial landscape sectors. Anna recently updated the LNA Rates Book.

Jonathan Garner Since 1990, Jonathan has built his reputation as one of the industry’s most skilled gardeners and knowledgeable horticulturists.

He provides various horticultural services, including onsite training, industry mentoring, and estate management to landscape contractors, designers, and garden owners. His professional integrity, enthusiasm, and respect from industry peers saw him elected as AIH NSW President for five terms..

CEO John Murphy COO Christine Clancy Sales Director Bradley Buchanan Editor Tom Foster tom.foster@primecreative.com.au Advertising Sales Manager Suzana Janjic Suzana.janjic@primecreative.com.au 0419 531 401 Production Editor Michelle Alder michelle.alder@primecreative.com.au

ON THE COVER

Design Louis Romero/Daz Woolley Subscriptions P. +61 3 9690 8766 subscriptions@primecreative.com.au

Website landscapecontractor.com.au

Copyright

OptimusZ Latin for ‘The Best’



 

 ­   ­

GREENWORKS: Engineered for all-day commercial use.

Marc Worner Marc started his own business in 1991, armed with a Diploma of Horticulture in Landscape Design and a structural landscape licence. Previously both the NSW and National President of the Australian Institute of Horticulture, Marc has been a consultant to the NSW state government, taught at TAFE, worked in TV and been a design consultant at retail garden centres.

Andrew Tulloch Andrew has been involved in the landscape-maintenance industry for more than 20 years. He is a member of the Australian Institute of Landscape Designers and Managers.

In 1991 Andrew started A.R.T. Landscape, which provides a landscaping and property service to commercial, industrial, and residential clients.

Landscape Contractor Manager is owned by Prime Creative Media and published by John Murphy. All material in Landscape Contractor Manager is copyright and no part may be reproduced or copied in any form or by any means (graphic, electronic or mechanical, including information and retrieval systems) without written permission of the publisher. The editor welcomes contributions but reserves the right to accept or reject any material. While every effort has been made to ensure the accuracy of information, Prime Creative Media will not accept responsibility for errors or omissions, or for any consequences arising from reliance on information published.

The opinions expressed in Landscape Contractor Manager are not necessarily the opinions of, or endorsed by, the publisher unless otherwise stated. © Copyright Prime Creative Media, 2023 Articles All articles submitted for publication become the property of the publisher. The editor reserves the right to adjust any article to conform with the magazine format.

Head Office 379 Docklands Dr, Docklands VIC 3008 P: +61 3 9690 8766 enquiries@primecreative.com.au www.primecreative.com.au Sydney Office Suite 3.06, 1-9 Chandos Street Saint Leonards NSW 2065, Australia P: +61 2 9439 7227

www.landscapecontractor.com.au

5

Business & finance

The best way to charge for a machine is to use hire rates.

Owning equipment and machinery: asset or liability?

WORDS: ANNA TURNER

O

n the surface it makes sense to buy the equipment and machinery you use regularly. It’s got to be cheaper, right? Well, that’s not always the case. The question must be asked on a case-by-case basis, and hopefully this article will help you answer it for your business.

To buy or hire? That is the question!

On the surface it always seems like buying equipment outright is a smart move.

Let’s look at the case study for a motorised wheelbarrow. They cost around $230/day to hire and around $4000 to buy. So, if you know you’ll use the wheelbarrow more than 20 times in the year you should be saving money, right?

You need to take many other issues into consideration when deciding. The wheelbarrow needs servicing twice a year which will cost around $500 each time, not to mention breakages, float and down time.

Doing the sums, it still looks cost effective to buy the wheelbarrow if you’re going to use it more than 30 days of the year. Anything less than that and you’re better off hiring.

What about a 1.8T excavator?

They range in price from $25,000-$50,000 plus attachments and trailer. Let’s say your excavator, including trailer and attachments, costs $50,000. Don’t forget to add on service and breakage fees. The machine will cost you at least $500 twice a year to service (plus float). And, unless you buy the excavator outright, you need to add on the interest you’ll be paying on the loan.

6

LANDSCAPE CONTRACTOR

Hire ground

Let’s compare that to hiring.

Hiring will cost around $400/day plus attachments and float. Even if you’ve purchased the machine outright you’d have to use it for more than 130 days for it to cost the same as hiring, so you’d need to keep it twice as busy to make it worth the purchase.

Hiring comes with way less headaches and way more flexibility.

Hiring is a more efficient way to operate.

You are no longer burdened by the need to use that one machine you own; you can hire the right machine for the job. Hire the tiny machine that gets down the side of the house, or that five-tonner to get the job done efficiently. And no need to worry about floating the machines from site to site, the hire company will do that for you. You can have as many or as few machines as you need. Your fleet is flexible!

Do the maths

You’ve probably guessed by now I’m a big fan of the hiring model. Not only do I think it makes sense from a logistics and financial perspective, but most people find it much easier to cost into projects.

Many people make the mistake of charging too little or nothing at all for their machine on site. To correctly add a purchased machine into quotes you need to know what it will cost per billable hour to run. That hourly rate must be passed onto the client with a healthy markup.

The best way to know what your machine

costs is to track the costs over the year and divide that by the number of hours the machine worked during that time. Those costs include: lease/loan, fuel, service, depreciation, insurance, breakages, float and so forth. When you don’t have those numbers to hand, start with what you can work out. The repayment costs, fuel, insurance, and servicing, then take an educated guess at additional charges you may incur. Divide that by number of hours you guarantee you’ll bill for the machine in a year and you’ll have your cost per billable hour. That rate must go into your quotes with a healthy markup to ensure you’re making money from it.

If you own or intend to own the machine, you absolutely must run the numbers above to give you a baseline. However, I think the best way to charge for a machine is to use hire rates. Use the daily hire rate for the appropriate machine for the project and don’t forget to add in plenty of float charges on top. This way you should always be charging an appropriate amount for the project at hand.

In conclusion, always run the numbers before you buy a machine. Smaller equipment and machines are usually more cost effective to purchase than larger ones. Be aware that you’ll need to keep the machine very, very busy to make profit from it. Always make sure you add the cost of the machine and equipment to your quotes with a healthy margin; you’re not running a charity. And keep in mind hiring offers much more flexibility that buying.

Introducing the first and only skid steer with a telescopic boom the JCB Teleskid; a truly unique, versatile skid steer with endless possibilities. Now you can lift higher, reach further, dig deeper.

This revolutionary product is designed to suit all types of job sites meeting the need of multiple machines wrapped nicely into one. Combining the strength and safety of our single side boom with side door entry and extendable boom JCB has increased the versatility of the SSL-CTL world.

To find out more contact your local JCB CEA dealer today.

Ph: 1300 522 232 www.jcbcea.com.au

Feature

Using taller or wider garden edging gives the opportunity to spread and retain more mulch in gardens.

Planter boxes and garden edging

Many types of planter boxes are experiencing boom times.

W

WORDS: MARC WORNER

e all love gardens but we can’t always plant out a garden for a variety of reasons. We may not be able to excavate the ground deep enough; or the property may be rented; or we may not have enough room to work with; or our clients may not have the time and/or energy.

Planter boxes can be placed anywhere.

Whatever the area or size, there’s a planter box just perfect for that space. Consider planter boxes on the terrace, patio, balcony, veranda, indoors, in corners and even in the garden as an eye-catching feature. The shapes are only limited by our imagination, and materials used in their construction vary from reusables to fibreglass, timber, Colorbond, concrete, and plastic.

Versatile

Bend-free planter boxes are gaining in popularity with our more mature population.

They’re standard issue in senior-citizen villages which have vege gardens and annual beds lovingly tendered to daily with ease by residents. Even the garden tools they use are tailored to those suffering with arthritis.

If space is a constraint, a vertical planterbox garden will neatly fit and augment the look of the space. They can feature in a villa, a townhouse, an apartment, or a large home.

Simply grow smaller plants, herbs, veggies or flowering plants and the result is a living wall.

The compass aspect of the vertical garden will determine what plants you put in the planter wall. For instance, a south-facing garden would suit ferns and other shade-loving plants, where a north-facing vertical garden is 8

LANDSCAPE CONTRACTOR

Knowing all the site details will help determine the material used which impacts on budget. perfect for herbs and veges – not to mention the smaller flowering plants.

Practical

Planter boxes on balconies are the obvious solution to privacy in apartment living. Run adjacent to the balcony perimeter they save on floor space yet introduce a modern design element to the space. The size of the planter boxes will determine the size of the evergreen plants to use.

TIP: Always go for a bigger size to help ensure you have a healthy privacy screen.

Plants hate having their roots being compacted.

A very important consideration in this project is the finished total weight of the planter-box garden. Engage with the client’s Body Corporate to find out what weight the balconies will tolerate and are permitted before quoting. Otherwise, it could be an expensive exercise in futility.

Zero Emission Solutions

Feature pansies in mobile planters to help engage the whole family.

Not only can planter boxes be useful additions to outdoors, they can also add ambience to indoors. Bare walls can be converted to feature walls; dull bedrooms can be transformed; living rooms can come alive; patios can have added interest and budding gardeners can learn their hobby more easily without needing a big budget.

TIP: Installing planter boxes may be an opportunity to create a short-term maintenance contract with your client over a 12-week period.

A garden edge of timber becomes a problem if the area is predominantly shady and wet throughout the year, because even treated timber will rot over time.

Media

Challenges

The effort of getting the planting media into the planter boxes is generally underestimated.

If the building doesn’t have a lift and the job is on the third floor; allow for this when calculating time and labour costs.

Windy balconies offer another challenge which can be overcome with the choice of plants, the placement of the planter boxes and knowing the rates of water evaporation from the plants.

Scapeworks offers a service where it pumps in the planting and mulching medium for

bigger jobs, both at height and at ground level, around Australia for many tier-one builders and landscapers.

Mobile

Planter boxes on wheels play their part.

Think about installing one just outside your clients’ kitchen so they can move it to suit the seasons and their entertainment needs.

They can eat what they grow with all the convenience of fresh produce literally at their back door, and children can be encouraged to grow seasonal flowers like petunias and

The best growing media to use for planter boxes is one from a leading supplier.

Spend as much as possible on a potting mix. You get what you pay for. The better ones are scientifically designed to provide a rate of drainage correct for the type of plant, and also provide plants with the essential nutrients to get them started in their new home. It also means we need worry less about those first three critical months of growth.

Edging

Garden edging is used to define different spaces in the landscape, enclose pathways, lead one’s eye to other areas and help keep maintenance low. Any long-lasting material can be used depending on budget, landscape design, type of ground, shape of edges and skill of installation.

M G H

Bend-free planter boxes are gaining in popularity.

10

LANDSCAPE CONTRACTOR

33

DEERE.COM.AU/COMPACTTRACKLOADER

SCAN TO LEARN MORE

MINIMIZE PASSES, GUESSWORK, AND HEADACHES. NEVER IDLE It’s all about doing more with less. So we did, with the widest range of machines equipped with grade management tech to suit your job needs today, and tomorrow. From 2D Laser Control to fully-integrated SmartGrade™, it allows any operator to grade with precision. Reducing passes, labor costs, and dreaded rework, to ultimately boost your bottom line.

333G

2D LASER CONTROL

Feature It is not just a matter of select and forget.

For instance, if we laid a garden edge of timber sleepers because the garden had long straight runs, it’s not a problem. It becomes a problem if the area is predominantly shady and wet throughout the year, because even treated timber will rot over time. If, however, concrete sleepers were chosen for that same project, there’d be no problem.

If I installed, say, plastic edging snaking through a garden, I must ensure I have it pegged at short distances apart, because unless it’s of a more expensive type, and so thick enough, it will buckle in a short space of time and look like an amateur installed it. It is most likely to work the best as a divider where the plastic edge is almost entirely buried and so less susceptible to deformation. Consider also that a trench is required to be dug to secure this type of edge.

So, knowing all the site details will help determine the material used which impacts on budget.

TIP: Using taller or wider garden edging gives the opportunity to spread and retain more mulch in gardens. It’s a win-win for client and landscaper.

VISIT WEBSITE

If edging is used to separate the lawn area from the garden path, it should be flush with the surrounds. If the ground is rocky, it may not be possible to dig down deep enough to secure the best outcome and it could become a trip hazard. Again, check the detail.

Decorative

Painted finishes or galvanised metal last the longest, yet unfinished metal has an attractive rustic appearance for country gardens.

A few companies make rubber edging that’s pounded into place, and it’s nearly indestructible as it’s usually made from recycled tyres. Other companies lay coloured concrete edging in different widths and heights, and another common garden edge is bricks.

Lay bricks in a shallow trench on their side with the wide side down or stand them upright. The hardest part is getting everything level or deciding on a fall over a distance.

Small fences are super-easy to use as garden edging. Many different types and sizes exist, including metal, wood, and plastic, so you’ll find the one that suits your client’s garden’s style.

Planter boxes can be placed anywhere.

Shop around

All the large the hardware chain stores around Australia sell these products at competitive prices, as well as other online direct suppliers offering good discounts for bulk purchases to landscapers.

SUSTAINABLE OPTIONS FOR YOUR GARDEN

METAL STRIP EDGING AND CONCRETE SLEEPERS.

Retaining Wall Products

 Retaining wall steel,  Sleepers, concrete, timber  Bagged concrete mix, rapid set

Metal Garden Products

 Metal screens, (made to order)  Garden edging, mild steel &/or Corten  Garden edging connectors  Star pickets

“Small business look-ing after the ‘Little Guys” 12

LANDSCAPE CONTRACTOR

P/L ries 57 t s u 73 Ind 899 Cee 03 8 r court Kay 75 loma 26 G h, Vic, 31 t u .a o m u S ong stries.co .au n e d Dan ceeindu ries.com y @ka dust sales ayceein .k www

Not only can you get your CONCRETE SLEEPERS AND GARDEN EDGING in a timely fashion, but you can also get it at a competitive price.

a

Feature

All the design considerations of conventional landscapes can be applied to xeriscapes.

Xeriscapes Understanding the water requirements of plants and providing adequate moisture will ensure long-term aesthetic quality.

WORDS: JOHN GABRIELE

T

here are climatic conditions, government, and community pressure on outdoor spaces to be more water efficient. As population growth continues to surge and the demand on one of our most precious resources increases exponentially, landscape designers are feeling the responsibility to design and construct landscapes that are not just functional, but also take into consideration the environmental impacts green spaces can have on the broader environment and their need for water.

Without doubt, plants form the foundation of an appealing landscape composition, and watering is the most obvious requirement to maintain plant health and to keep them in peak condition and looking good.

How can we incorporate sound environmental stewardship into landscape design without compromising aesthetic appeal?

The answer is in xeriscaping.

What’s in a name?

Xeriscapes are not just focussed on saving water. Xeriscaping is more a philosophy 14

LANDSCAPE CONTRACTOR

of selecting plants and other landscape components to minimise water use and other maintenance activities associated with plant management. The term ‘xeriscape’ is derived from the Greek word ‘xeros’ meaning dry, and ‘scape’ in reference to landscapes, and it’s in regions subject to harsh, hot, dry weather conditions that xeriscaping has become synonymous with landscape design.

Xeriscaping often conjures up images of cacti and succulent gardens, and many people hold an unfounded belief that xeriscapes are dry arid unappealing spaces. Nothing could be further from the truth. With some careful planning and correct plant selection Xeriscapes can be lush and appealing.

Botanically speaking, xerophytes are plants which have a low water requirement and have modifications and adaptations that give them the ability to not just survive, but thrive, in regions with low rainfall and where atmospheric temperatures can cause excessive moisture loss (transpiration) through the leaves. Of course, cacti and succulents are well documented as xerophytic, however there’s a broad range

of plants, particularly Australian native flora, with adaptations and modifications that assist in surviving harsh environmental conditions.

They’re ideal for the Wide Brown Land and are well suited to inclusion in xeriscapes.

Survival of the fittest

Modifications and adaptations include examples such as a phyllodes on acacia species, where the leaf petiole is modified to function as a leaf. Phyllodes have a reduced number of stomata, which, in turn, reduces the amount of water lost through transpiration from the leaf surface. Cladodes are modified stems which function as a leaf by photosynthesising and often have water-storing capacity. Rolled leaves, leaves reduced to spines, and hairy or waxy cuticles of the leaf surface are also characteristic of many xerophytic plant species. One interesting aspect of some many eucalypt species is their ability to use nastic movement and turn their leaf surface at an opposing angle to the sun, thereby reducing the area of leaf surface exposed to direct sunlight and reducing water loss through transpiration.

a

DIG UP A GREAT DEAL TODAY!

L I M I T E D

T I M E

O N L Y

GREAT OFFERS TO DIG ON OUR MINIS:

PARTS & SERVICE CREDIT $2,000 Parts & Services Credit*

or

WARRANTY UPGRADE

60 month/5000 hours full machine warranty*

For more information contact your local branch or visit hitachicm.com.au/deals-on-minis

OFFER ENDS 31 MAR 2023

*Terms and Conditions: *Only one offer is selectable per machine order. Offer is valid for orders signed between 01/10/2022 to 31/12/2022 and must result in delivery and full payment to qualify for incentives. Applicable to the following new models: ZX17U-5, ZX26U-5, ZX33U-5, ZX38U-5, ZX48U-5, ZX55U-5, ZX65USB-5, ZX75US-5, ZX85USB-5. The Hitachi parts/service credit is to the value of $2,000 (including GST), this offer is not redeemable for cash and must be redeemed within a 24 month period. The warranty upgrade offer is transferrable if sold during the extended warranty period.

Note: Low document finance is not available with these offers.

Feature Mallee eucalypts also have extensive root systems and display allelopathy, preventing other plants from germinating, growing, and competing for available water by releasing biochemicals into the surrounding soil.

Some plants open their stomates in the early morning but generally close them by late morning on a dry day, and some succulent plants can absorb water from the atmosphere in the early mornings when dew forms.

With a better understanding of the physiology and morphology of plants species, designers can make better decisions on correct plant selection.

Natural selection

Designers can select from a wide range of ephemerals, groundcovers, shrubs, and trees, all of which are suitable for xeriscaping.

Selecting plants to meet xeriscape design considerations such as colour, texture and form can be just as challenging for designers as with any other landscape style. Each site will have its own specific microclimate and site characteristics that will determine plant selection for ongoing success of the installation. Australia is blessed with a wide variety of climatic regions and when we begin to understand the natural environment, we are better placed to make informed decisions

The use of sculptural elements strategically placed within a xeriscape can bring a creative element to the space, elevating it from drab to fab. on constructing landscapes that are not just beautiful and functional but are sympathetic to the natural systems that support them. The link between constructed landscapes such as xeriscapes, the natural environment and the need to develop a deeper knowledge and understanding of the connection with modern landscape design cannot be better said than in the words of Dr Malcolm Calder, Botanist, 1989, who promulgates that: “Unfortunately the ecological diversity, complex forms of adaptation of Mallee flora and fauna, the

Xerophytes are plants which have a low water requirement and the ability to not just survive, but thrive, in regions with low rainfall and where atmospheric temperatures can cause excessive moisture loss (transpiration) through the leaves.

16

LANDSCAPE CONTRACTOR

role of Mallee vegetation in maintaining soil stability and regulating soil water tables and its intrinsic conservation and scientific values have not been understood or appreciated by the majority of Australians since the earliest colonial days.”

A minimalist approach

Xeriscapes will often only include a small number of plant species and less of them, as the emphasis is on reducing watering requirements. Gravel mulches or similar are

We’re always on hand.

With fast delivery, an industry leading range and easy product ordering using our maX app, we’re here to make your next landscaping project quicker and easier. So, whether you’re working above ground or below it, talk to us first!

Reece. Works for you.

Find out more reece.com.au/irrigation

Feature Designers can select from a wide range of ephemerals, groundcovers, shrubs, and trees, all of which are suitable for xeriscaping.

S

ST

An im syste mach easie thick

a characteristic of most xeriscapes, however organic mulches such as woodchip or bark can be used, but there will be greater tendency for weed establishment.

All the design considerations of conventional landscapes can be applied to xeriscapes. Architectural plants can be used as a focal point and to anchor the design while diverse plant selections can provide a juxtaposition within the design. The use of other landscape elements including rocks, boulders, logs, or other sculptural elements

such as Corten steel, stone statues, artworks and so forth strategically placed within a xeriscape can bring a creative element to the space, elevating it from drab to fab.

The goal of creating a landscape that is drought resistant and water wise often leads to the challenging decision of what to do with the lawn. Australians love their lawns and xeriscapes are often designed with the lawn being eliminated, or at least relegated to being a minimum component of the overall design or installed using water efficient

There are climatic conditions, government, and community pressure on outdoor spaces to be more water efficient.

18

LANDSCAPE CONTRACTOR

varieties such as Zoysia species. Selecting lawn substitutes such as groundcovers which have minimal watering requirements, or incorporating hardscape elements such as decking or paths to reduce or eliminate lawn areas, is another principle of xeriscaping that can assist designers in increasing the functionality of a landscape. This can be particularly useful in smaller urban landscapes.

Xeriscapes have significant upsides when it comes to maintenance. The fact xeriscapes have minimal water requirements results in less need for pruning, irrigating, weeding, and fertilising. All these actions actually stimulate plant growth, whereas in a xeriscape it’s all about slow, steady growth, so interventions are kept to a minimum.

The principles of xeriscaping can be applied in more temperate, humid climates, although maintenance activities such as pruning may be more frequent.

With consumers becoming more environmentally conscious and governments imposing greater environmental restrictions on development, xeriscapes and other forms of landscape design that work with the environment are becoming increasingly popular. Landscape designers and contractors need to increase their knowledge and understanding of environmental issues and incorporate this into modern landscape designs and installations.

M N

SK900

Featuring a Yanmar® 24-HP (18.5 kW) diesel turbo engine allows for more torque where it matters so you get more done.

STAND-ON SKID STEER

Customer-driven control placement optimizes operator comfort and reduces fatigue.

Rated operating capacity - 422kg (35% of tipping capacity)

An improved ground drive hydraulic system bulks up the longevity of the machine while daily upkeep is made easier with an accessible fuel cover and thicker exhaust pipe

Compatible with an array of attachments for more versatility

Smaller, narrower frame is perfect for tough jobs in hard-to-reach areas.

MUSCLE WHERE YOU NEED IT MOST.

Stronger than the competition, the Ditch Witch® SK900 puts in more muscle on landscaping and construction-grade jobs with a lower ground drive speed and more power directed where you need it most.

With a lower ground drive speed the SK900 provides superior power to the attachment, outperforming the competition to dig, lift and drive.

DITCH WITCH STAND ON SKID STEERS Designed for demanding jobsites and built to outperform, a Ditch Witch stand-on skid steer will deliver unbeatable performance time and time again. Check out the extensive range Contact your nearest branch today

1300 788 757

ditchwitchcea.com.au

BRISBANE - SYDNEY - MELBOURNE ADELAIDE - PERTH

Feature Clay soils can hold a whole lot more water than sandy soils.

Layer upon layer Jonathan Garner gets to the nitty-gritty of water movement through soil.

WORDS AND IMAGES: JONATHAN GARNER

G

reetings reader. I think you might find this chat interesting.

In many developments where we are engaged to ply our craft and create a healthy living environment, we are confronted with various complex patterns of unnatural soil development. We can often face physical disturbances such as bulk top dressing, scalping, inversions, layering and often pollution. It can sometimes be the case that without knowing, we’ve created these conditions ourselves.

Cast your mind back to when I touched on the importance of decent aeration and good drainage. Beyond compaction layers, lower areas within the landscape and physical restrictions such as pavements and foundations, the free movement of water can often be limited by alterations the existing levels from imported material with various soil textures that lack similarities to the existing profile. Many of these soils can be so unrelated that the horizon layers look more like a sandwich or hamburger rather than a natural profile. Let’s cover off on generally what’s happening from these disturbances.

Water movement

The first thing we need to look at is how water moves through the soil, and in many poorly layered soil profiles, how it doesn’t move or gets stuck.

20

LANDSCAPE CONTRACTOR

Gravity is straightforward and makes sense: pour a bucket of water on the soil and it generally soaks in (sometimes quickly, sometimes slowly). Gravity is the force that pulls water downward. Meanwhile, there’s a few other things going on that can make water move in all different directions. Left, right, down, up and, the most troublesome, stationary. The first two properties are known as cohesion and adhesion. These two are involved with how the water relates to the particular soil texture and how it moves, or for the purpose of this discussion, how it’s not moving.

Water cohesion is what attracts water molecules to one another (think of a raindrop on glass) while adhesion is water’s attraction to other surfaces such as soil particles, organic matter, and your clothes after spilling a drink. Cohesion and adhesion enables water in the soil to defy the laws of gravity, and the behaviour of these two principles is directly related to the soil texture and structure (more on this in a tick).

Meanwhile, water is also responsible for the third principle, known as surface tension. This property dictates how water might remain in the shape of a droplet rather than a thin film.

When these three principles are put together, it’s collectively known as capillary action.

If you’re starting to glaze over, please stay with me here because it will make sense soon.

Droplets and films

Remember when we talked about the three soil-texture classes: clay, silt, sand and their respective surface areas? Particle sizes and the surface area? Remember that the finesttextured soil particles – clay – has the greatest surface area in a given volume of soil?

While these cohesive and adhesive forces in the finely textured soil are doing their thing, the third principle, surface tension, is playing a reduced role. Where one microscopic soil particle touches another, the water will spread like a film. Where the soil particles are spaced apart, such as in a sandy soil, the larger pore spaces allow water to lose its grip on the small particles, and therefore the ability to move consistently through the soil. The water behaves more like a droplet. This is why heavier clay soils are much slower to drain than sandy soils. It’s also why clay soils can hold a whole lot more water than sandy soils.

Think of sandy soils having droplets of water throughout the profile while clay has films of water. As there’s more surface area in a film, there’s more volume.

Wetting agents

While we’re on this topic of surface tension, let me briefly explain the basic principles behind wetting agents, surfactants, penetrants, and detergents.

All of these products essentially do the

Feature

Perched water tables.

same thing. They break the surface tension of water so it behaves like a film rather than a droplet. In the kitchen, detergent enables water to spread thinly over the dirty surface while the solvents in the product help dissolve the pollutant into the water. In a fire, wetting agents or surfactants are mixed into the water so a film is created over the material that’s burning or about to be burned. This film of water helps to starve the fire of oxygen.

Pesticides have surfactants pre-mixed or mixed in later. These enable the chemical to spread over the leaf or critter as a film rather than droplets that roll off. Soil-wetting agents work to convert water into a film rather than droplets. A film of water re-wets dry potting mix and soils with high levels of organic matter much better than droplets ever can.

If you’re working with sandy soils wetting agents will help water penetrate deeper and coat the large soil particles with a film of moisture rather than droplets of water. Sorry for digressing but this was worth including.

22

LANDSCAPE CONTRACTOR

A demonstration

Bringing this situation into context: when we’ve created or are experiencing interfaces or layers of different soil textures, such as silt or clay spread over sand, water can behave in weird ways. Drainage will be hindered at the interface layer where the water can’t or won’t migrate into the new layer. This is the same reason why ag drains installed to remove excess sub-surface water often don’t work.

In fact, they often make the drainage worse in the soil above the drain. This is also why a layer of gravel in the bottom of a pot or planter worsens drainage rather than improving it.

But why? Surface tension.

Because we’ve broken the continuing chain of soil particles that allows the water to move cohesively through the soil, we can only rely on gravity to pull the water down into the coarser soil (or aggregate in the case of drains and pots). Gravity alone doesn’t allow the water to ‘fall’ into the voids of the more-porous gravel or sandy soil beneath the finer textured topsoil.

Only when the soil above this porous profile is completely saturated and all of the air spaces in the soil are completely filled with water will the excess water in the soil above be pulled by gravity into the freedraining profile beneath. Once that excess water has ‘fallen’ into the voids of the gravel drain, each soil particle will still remain completely covered by the water that clings to it by surface tension or adhesion. This often means the soil above the free-draining profile will remain saturated until it can be removed from evaporation or absorbed by roots. This permanently wet area is called the capillary fringe. As the spaces between the soil particles in this area are mostly filled with water, gaseous exchange is hindered and the unsavoury stench of toxic anaerobic conditions soon occupies the soil profile.

Check out your car-washing sponge for a perfect demonstration of surface tension and capillary fringe at play. Soak it thoroughly and hold it horizontally. Water will drain away then stop. Although the bottom third or quarter of the sponge is still drenched with water, gravity has ceased drawing it out and the other three principles come into play. Turn the sponge so it’s vertical and watch more water spill from the sponge. Imagine the sponge being the soil with the capillary fringe being the bottom layer. When we turn the sponge on its side, the water is still present because it resumes draining thanks to gravity.

RENAULT TRAFIC big space for big things

the longest loading length in its category: up to 4.15m best in class driving range don’t miss out on the instant asset write off1. order today to lock in delivery before june 30.

1 Subject to complying with statutory conditions. Eligibility for instant asset write-off depends on your specific circumstances. For more information on accessing the instant asset write-off, consult with your accountant or qualified tax professional before making a decision.

OVERSEAS MODEL SHOWN

renault.com.au

Feature Green keeper

These layered soil horizons often occur in areas where the free-draining topsoil has been inverted or buried by finer textured local or imported soils. The greater the difference between the textures of the two soil types the more the upper soil will hold onto the water.

So when we install drains with 10mm – 20mm aggregate underground, the textures are so vastly different that the capillary fringe will continue to maintain a perched water table above our highly porous, well-intentioned but useless ag drain.

The only way to ensure your ag drain works effectively is to maintain the same type of gravel from the bottom of the drain to the soil surface and definitely avoid using geofabric between the gravel and surrounding soil.

Geofabric doesn’t work as a filter. It blocks with silt and only serves to maintain an unhealthy interface between the boggy soil and dry aggregate. How many of us have dug through boggy conditions to cut the geofabric out of the ineffective ag drain? How many of us have observed that once the aggregate is exposed to air above, the drain works properly?

By spreading these unrelated layers of soil we’ve created a situation called a perched water table. Providing the capillary fringe is deep enough in relation to the soil texture and not in contact with high levels of organic matter, things mightn’t be too bad. In fact, if we were building a USGA sand-based putting green with no organic matter in the soil horizon, we’d have created a water-efficient sand profile that could hold a reservoir of accessible water deep enough for the turf to Surface tension dictates how water remains in the shape of a droplet rather than a thin film.

24

An example of incompatible layers. Soil is essentially a sponge. The pore spaces in a sponge allow water to move thanks to cohesion. The sponge stays moist thanks to adhesion. Soak it full of water and hold it in the air and approximately half the water drains thanks to gravity. Why doesn’t the lot drain out? Thanks to surface tension, the water gets stuck, or becomes ‘perched’, in the bottom section or ‘interface layer’. The bottom half of the sponge is so saturated roots will die in it.

LANDSCAPE CONTRACTOR

LuiGong

READY TO HIT THE LANDSCAPE

HigH performance easy maintenance

BEST VALUE Discover the range of LiuGong Mini Excavators 9018f (1.8t) 9027f (2.7t)

9035e (3.5t) 906e (6t)

toUgH WorLD. toUgH eQUipment.

LuiGong Landscape Contrctr full Mar 2023.indd 1

for further information liugongaustralia.com.au 27/3/23 4:46 pm

Feature

Compaction will prevent the free movement of water through soil, but there are other factors to consider.

W

T

N draw from with little loss to evaporation and little risk of diseases from excess rootzone moisture.

Blend and vary

Most, if not all of the time, we’re not building an engineered putting green. We’re building an ecology that’s supposed to drain well.

Okay, we’ve created or discovered this layered-soil problem which has left us with a perched water table. The depth of the water table will determine whether we live with it or fix it.

As I mentioned earlier, If the capillary fringe is sufficiently deep enough for the type of soil texture and organic-matter content the garden might be able to grow above this

problem while the root systems establish and begin to exploit the water resource.

Given a loamy soil has a capillary-fringe depth of around 200mm and the high levels of organic matter in most landscape soils then I doubt we have sufficient depth in the profile to ignore the water problem we have.

So how do we solve these layered horizons?

The goal is to eliminate the interfaces of the varying soil textures by blending the layers.

If you’re importing soils or pushing material around the site, the trick is to ensure two soils are blended together as much as possible while you’re increasing the depths.

Aim to create an interface that looks more

like a jagged edge or stock-market graph.

Always avoid straight lines of differing soil types.

If the garden is already planted, consider cultivating the surrounding soil deep enough to ensure they’re mixed together.

Another option for very deep layers would be to excavate through the layers with a posthole digger or auger throughout the affected gardens, then backfill with the homogenised soil. These holes will create breaks in the interface which will allow water to drain through and roots to penetrate.

I hope this chat has helped to explain one of the biggest and most common misunderstandings our industry has with managing our soils.

C

Z

I f n e o

F e t

26

LANDSCAPE CONTRACTOR

WELCOME

TO YOUR

NEW

COMFORT

ZONE

Introducing the new SK45SRX-7 and SK55SRX-7 mini excavators from Kobelco – delivering improved performance and class-leading next generation cabin design. With an extra spacious cabin, improved ergonomics and advanced technology, you’ll be able to make full use of the extra power and speed on offer, all day long.

For uncompromising operator comfort and superior productivity, experience the new Kobelco SK45SRX-7 and SK55SRX-7 today – taking performance to the next level.

@kobelcoaustralia

kobelco.com.au | 1300 562 352

battery power. by stihl. ƒ POWERED BY OVER 95 YEARS OF GERMAN ENGINEERING EXCELLENCE

AS SYSTEM ƒ COMPLETE A RANGE OF INTRICATE GARDEN TASKS WITH EASE The compact, easy-to-handle power tools in the AS System are perfect for a diverse range of tasks around the garden. Powered by the AS 2 battery, both tools in this system deliver reliable performance for intricate work.

AI LINE ƒ FOR SMALL TO MEDIUM SIZED GARDENS With the quick and easy-to-operate power tools in the AI Line, you will be fantastically well equipped to deal with tasks in your garden. All three tools feature an integrated battery and offer lightweight and straightforward handling, making jobs for the domestic user even easier to complete.

28

LANDSCAPE CONTRACTOR

AK SYSTEM ƒ FOR MEDIUM TO LARGE SIZED GARDENS Offering 12 tools and growing, users are impressed by the power and stamina of this flexible range of battery powered tools. Ready for any challenge, the versatile AK System gives users more choice in the garden than ever before.

AP SYSTEM ƒ FOR LARGE GARDENS AND PROFESSIONAL APPLICATIONS Our AP System boasts over 30 high-performance tools. The capacity and stamina of each tool makes them well suited to large gardens, longer periods of work and commercial users who require the utmost in reliability, day after day.

www.landscapecontractor.com.au

29

On the cover

GREENWORKS

G

The GREENWORKS® superpower is ‘battery-first design’, making it possible to harness unparalleled power, longevity and performance.

REENWORKS is a leading brand in the outdoor power equipment industry.

Having made a significant impact on the market in the United States and other key Global Markets, JAK Max brought the GREENWORKS range to Australia as the exclusive distributor in 2019 and is now set to launch the highly anticipated 82V Commercial Product line to the Australian market.

The company

GREENWORKS was founded in 2007 with the goal of revolutionising the outdoor power equipment industry by providing an efficient alternative to traditional petrolpowered products. The company’s vision was to create high-quality tools powered 30

LANDSCAPE CONTRACTOR

by batteries, eliminating the need for petrol and reducing environmental impact.

With this vision, GREENWORKS quickly gained recognition as a pioneer in the battery-powered outdoor power equipment industry.

Since its inception, GREENWORKS has been committed to continually being at the forefront of battery technology and innovation. The company has continuously invested in research and development to improve the performance and durability of its tools, resulting in over 1000 patents on its products, and over 70 patents for invention, with factories on three continents.

The products

GREENWORKS has focused on making its

products user-friendly and accessible to a wide range of consumers – homeowner, DIYer and professional landscaper – with a variety of voltage platforms encompassing 24V, 40V, 60V and 82V. 2016 was a key moment in GREENWORKS’ company history, with the introduction of its 82V range of tools, ‘GREENWORKS Commercial’. The range is specifically designed for professional users who require powerful and reliable tools for landscaping and lawn-care needs.

GREENWORKS Commercial offers a wide range of battery-powered tools, including: • Zero-turn mowers • Stand-on mowers • UTVs • Lawnmowers

The GREENWORKS Commercial range is specifically designed for professional users who require powerful and reliable tools for landscaping and lawn-care needs.

• • • •

String trimmers Blowers Hedge trimmers, and Chainsaws All GREENWORKS products are engineered to deliver exceptional performance and durability, making them ideal for heavy-duty use in commercial applications.

Pro quality

GREENWORKS Commercial has gained significant traction in the commercial market since release, fast becoming the preferred choice for many professional landscapers and lawn-care contractors.

GREENWORKS Commercial offers a complete battery solution for the contractor, with products to suit every requirement.

Being at the forefront of the commercialbattery industry, many models are on their second and third generation of development, making the Greenworks Commercial outdoor power equipment range an easy choice for landscape contractors.

GREENWORKS units – like the new 30” selfpropelled mower – are going to be market leaders, with great run time and performance.

Coming soon

JAK Max is looking forward to June 1.

On that day a whole host of new GREENWORKS products will be launched to the Australian market, including the latest generation in battery zero-turn mowers, the Optimus Z range. Optimus Z units are

going to be market leaders, with the best runtime and performance. The new 30” self-propelled mower, 1.2kw string trimmer – with the power to-weight ratio of a 31cc petrol outfit – and 3.4kW chainsaws are also generating a huge amount of interest in the contractor market. www.landscapecontractor.com.au

31

Case study

Ditch Witch SK900 mini skid steer Powerful, versatile, and user-friendly.

“I call it my other staff member,” grinned Matt Clissold of Total Perfection Landscaping. “It’s the one that’s always willing to work hard!”

F

eaturing a new Yanmar 24-HP (18.5kW) turbo-diesel engine, the SK900 takes some of the features found on Ditch Witch’s larger SK models and puts them into a beast of a mini stand-on skid steer.

A narrow footprint optimises power to get the job done without sacrificing the manoeuvrability and versatility that makes the small machine so useful.

Matt Clissold from Total Perfection Landscaping was Australia’s first owner of an SK900, taking delivery in March of this year. He’s been extremely happy with the performance of the machine.

“I call it my other staff member,” grinned Matt. “It’s the one that’s always willing to work hard!”

32

LANDSCAPE CONTRACTOR

An excellent investment for landscaping and construction professionals.

Complete service

Matt is the proud owner and working director of Total Perfection Landscapes.

Established in 2015, Total Perfection Landscapes services Greater Sydney, Newcastle, and the NSW central coast. He was previously second-in-charge on group one golf courses in Sydney and has been in the industry since he was 15.

“Total Perfection Landscapes started as a landscape-maintenance company,” recalled Matt, “though quickly progressed to include landscape construction, and now all areas of landscaping.

“We’re a diverse team that can complete a whole landscape package, so the client only needs to deal with us at the end of a new build or landscape makeover.”

User friendly

The Ditch Witch SK900 packs a punch with new high-torque ground-drive motors. a significant upgrade that means this unit punches well above its weight, providing increased tractive effort, and power available to attachments. An easy-flip throttle allows operators to conveniently manage speed for more efficiency. The new Yanmar engine runs at a lower rpm making it a lot quieter.

An all-new troubleshooting gauge ensures it’s easy to identify faults and monitor engine parameters.

“It gives me great peace of mind knowing it’s there should myself or one of my staff members need it,” stated Matt.

Features

CEA offers a wide range of quick-change attachments for the SK900. During this review Matt was using the machine to level out dirt, but found he needed to move some pallets.

The swap from the 4-in-1 bucket to the pallet forks attachment only took about a minute, and Matt was able to make the change in a narrow driveway.

The machine handled the tasks with ease, tracking effortlessly around the site, manoeuvring through tight spaces and around the side of the house, and lifting anything that needed to be moved (featuring a tipping load of 1208kg).

The SK900 features intuitive controls that are easy to learn and use effectively. This is especially important for Total Perfection Landscaping, as it often has multiple operators utilising the machine.

Overall

The machine handled the tasks with ease, tracking effortlessly around the site, manoeuvring through tight spaces and around the side of the house, and lifting anything that needed to be moved (featuring a tipping load of 1208kg).

The Ditch Witch SK900 mini skid steer is www.landscapecontractor.com.au

33

Case study

The swap from the 4-in-1 bucket to the pallet forks attachment only took about a minute, and Matt was able to make the change in a narrow driveway.

This unit punches well above its weight, providing increased tractive effort and power available to attachments.

34

LANDSCAPE CONTRACTOR

an excellent investment for landscaping and construction professionals. Its compact size, new hydraulic system and high-torque drive motor combination plus versatile attachments make it a valuable tool for a variety of projects, while its safety features and user-friendly controls make it a great choice for businesses with multiple employees.

If you’re in the market for a mini skid steer, the Ditch Witch SK900 is definitely worth considering. A powerful engine, versatile attachments and user-friendly controls make it an excellent investment for businesses of all sizes.

Total Perfection Landscaping was Australia’s first owner of an SK900.

The SK900 features intuitive controls that are easy to learn and use effectively. www.landscapecontractor.com.au

35

Case study

LiuGong 9027F ZTS and Green Acres Golf Club The LiuGong 9027F ZTS is a compact mini excavator ready to handle any challenge: utilities, foundation work, landscaping, indoor or outdoor demolition, and construction projects. If you ask Nick, the assistant superintendent at Green Acres Golf Club near Melbourne, Victoria, he’ll tell you with a smile, “The size is perfect.”

Ready to handle any challenge.

36

LANDSCAPE CONTRACTOR

G

reen Acres Golf Club recently acquired a 9027F ZTS mini excavator to rebuild all its bunkers after last year’s floods.

“The water levels got to six feet high,” Nick explained.

The floods hit extremely hard, and the club has had to rebuild a lot of the course.

“We’re using the excavator for bunker work,” explained Nick. “We had to rebuild all of them. That’s the main job for the LiuGong at the moment. Then it will move on to drainage work.”

Built to perfect dimensions

“The size is perfect for us and what we do,” Nick continued. “The weight and tracks don’t affect the ground too much.”

With an overall length of 4160mm and an overall width of 1550mm, the 9027F boasts a very versatile frame that allows it to go almost anywhere landscapers need it to. The machine’s operating weight is just 2680kg, making it extremely light, and that’s even more impressive as it doesn’t come at much of a compromise. The Yanmar 4TNV98CT engine is

more than powerful enough to get the job done.

The lean design also means, for the Green Acres team, transportation around the large course is very easy and efficient.

Peter Walker, Regional Manager from Pacific Machinery Group (PMG), said the attributes of the 9027F were a real asset for the job in hand.

“For me to sell an excavator to this environment, a golf course, I needed a machine that was light to drive onto greens and which could get inside of bunkers.

The golf club needed a machine that was light enough to drive onto greens and which could get inside bunkers.

www.landscapecontractor.com.au

37

Case study

The Liugong 9027F ZTS has proven a huge asset for Green Acres Golf Club.

38

LANDSCAPE CONTRACTOR

LiuGong 9027F ZTS

The size is perfect for us and what we do,” said Nick, the assistant superintendant at Green Acres Golf Club.

The cab of the 9027F is spacious and air-conditioned, with an adjustable seat and easy-to-use controls.

It needed a quick hitch which allowed it to do all sorts of work.”

Reliable and supported

Green Acres purchased the 9027F from PMG and Peter had very high praise for the aftersales support from the LiuGong Australia team, recounting a minor issue: “They actually came out with three of their reps and their mechanics and techs, and they made some needed tweaks to the machine in front of the golf-course guys. I love that. That was terrific.

And I think it showed the general manager it was a perfect thing to do when there was a problem.”

Peter also talked about quick parts delivery for the 9027F, saying, “With this machine, I’ve got parts in Melbourne, I’ve got parts in Sydney, I’m only a phone call away and we’ve got a very extensive parts list.

“We’ve got the top 500 parts purchased and stored in Sydney with LiuGong Australia and with PMG.”

Features

When asked about his favourite features of the 9027F, Peter reeled off, “What I like about the 9027 is its simplicity. That’s what it comes down to. It’s a simple machine.

It’s small, but still got some good grunt.

The Yanmar three-cylinder diesel does everything just perfectly on this machine, and it has a quick hitch, an advanced hydraulic system, a two-speed travel system and there are multiple attachments available for it to different jobs.”

Overall

The Liugong 9027F ZTS has proven a huge asset for Green Acres Golf Course.

Operating weight

2680kg

Engine power

15.2kW (20.4 hp) @ 2500rpm net

Bucket capacity

0.05m³-0.1m³

Maximum travel speed (high)

4.5kph

Maximum swing speed

9.5rpm

Arm breakout force

12kN

Bucket breakout force

20kN

Overall length

4160mm

Overall width

1550mm

Shipping height

2450mm

Track shoe width (std)

300mm

Boom

2080mm

Arm

1300mm

Digging reach

4757mm

Digging reach on ground

4648mm

Digging depth

2857mm

Vertical wall digging depth

2312mm

Cutting height

4365mm

Dumping height

3067mm

Minimum front swing radius

1965mm

Model

Yanmar 3TNV80F-SNLY

Emission

EU Stage V/ Tier 4f

System maximum flow

86.4L/min

System pressure

21.6MPa

With its reliability, durability, and impressive performance, the LiuGong has been efficiently tackling rebuilding bunkers. The size of the machine is ideal for manoeuvring in tight spaces around the course, ensuring precise and accurate reconstruction, and the advanced hydraulic system and powerful engine allow for smooth and efficient operation.

On top of all that, the professional and reliable support from LiuGong Australia are contributing to a seamless experience for Green Acres Golf Course. www.landscapecontractor.com.au

39

Case study

Hitachi and Ryan Williams Ramping up the action.

T

he ZX65USB-5 mini excavator is the largest machine in Hitachi’s mini range.

Hitachi excavators are renowned for durability whilst delivering high levels of productivity with reduced running costs, and the ZX65USB-5’s round, compact body design combines with wide-opening covers, a spacious cab and enhanced visibility to make the operator’s workspace safe, comfortable and efficient.

And it’s not only experienced, professional operators who appreciate the benefits of Hitachi design and build quality.

R-Willy

At 28, Ryan Williams – ‘R-Willy’ to his legions of Instagram and Youtube followers -already has a fairly spectacular career to look back on. When it comes to sport, Ryan is all about the action.

“I’m a professional BMX rider,” grinned the Sunshine Coaster. “I’ve been doing it

since I was 12. I’ve been touring with Nitro Circus for 11 years and won five X Games medals.”

As we tried to digest what 11 years of BMX flips and insane jumps must be like, we were driven to wonder what need an action-sport champion would have for an excavator.

“I have 40 acres of land,” explained Ryan, “and it has a lot of tracks.

“It used to be a mango farm, and the Hitachi is great for clearing tracks, creating firebreaks, making sure the paths are clear…I didn’t have an excavator before, and the tracks would get overgrown to the point where we couldn’t mow them.”

Lift and carry

Ryan’s other big use for his ZX65USB-5 is hefting around the giant ramps he uses for his BMX and scooter jumps.

“My ramps weigh over a ton, the Hitachi turns a 15-man job into a one- or two-man

job,” he said. “There’s a lot more I can do with the Hitachi, and that’s why I bought the six-tonne machine. I’m using a 20-foot ramp now and I know I’m only going bigger, so I bought a machine which could handle the growth.

“But it’s mostly handling the ramps and working around the property.”

Word of mouth

With very little experience on earthmoving machinery of any kind, we were curious about what led Ryan to choose Hitachi.

“I’d heard they’re a really reliable machine, and my dad’s a pro excavator operator and he vouched for the Hitachi brand,” said Ryan. “I have a friend who’s also a BMX rider and who drives excavators, and he vouched for them as well.

“I went and visited the Hitachi branch in Brisbane and met Antony Moore, Sales Representative for Hitachi. He showed me

Caption left two lines

40

LANDSCAPE CONTRACTOR

From left: Steelwrist’s Tony Fitzgerald, Ryan ‘R-Willy’ Williams, and Hitachi’s Antony Moore.

Ryan Williams has been touring with Nitro Circus for 11 years and won five X Games medals

the machines – they’re beautiful-looking machines – and I went with them.”

How difficult is it for a novice to handle a ZX65USB-5?

“I have no excavator background,” outlined Ryan, “but my dad operates excavators for a living, so he taught me what I need to know to use the Hitachi. As long as you’re a in a spot where you can’t really break stuff, where there’s open space, you can pick it up pretty quick.

“I’ve got the Steelwrist tiltrotator on it as well, and I’m learning from scratch. I’ve only done about 50 hours in it so far and there’s a lot more to learn, but I’m pretty stoked on it.”

Easy to live with

Ryan uses the ZX65USB-5 to move around his giant ramps and maintain his 40-acre property.

Although Ryan’s still fairly new to the Hitachi, he understands the need for maintenance, and so far he considers it a real plus for the ZX65USB-5. Right now it gets fired up and put to work three or four times a week.

“The daily maintenance is really easy,” he said. “It’s one of the things I loved about it.

“When Antony opened everything up it was really simple for him to explain it to me.

He only had to show me once and I pretty much know how to maintain the machine now.”

When it comes to tackling the tough stuff, the Hitachi and the action-sports athlete are a great match. www.landscapecontractor.com.au

41

EQUIPMENT & PRODUCT REVIEWS

Mini excavator A Perkins 404D-22 engine drives the 55Z, a quiet, 2.2-litre unit delivering 35.7kW at 2000rpm and reduced operating costs in a small, efficient package.

JCB 55Z compact excavator One of the strongest and highest performing mini excavators JCB has ever built.

T

racked excavators have been a part of the JCB manufacturing family for over 50 years, and the latest mini excavators, including the 55Z, are the strongest and highest performing next generation of machines the company has ever built.

The toughest form.

With a finite-element, analysis-designed, heavy-duty structure, as well as simplified H-frame construction, the undercarriage of the 55Z is both durable and confidenceinspiring, while the clean, four-plate dipper design provides added structural strength and durability.

There are no plastic external body panels on the new JCB machines; instead they have 100% high-strength, pressed-steel bodywork, and the optional heavy-duty kingpost and boom/dipper features durable graphiteimpregnated bushes which offer 500-hour service intervals and provide a safe route for all excavator hoses.

42

LANDSCAPE CONTRACTOR

The heavy-duty boom cylinder guard and optional dipper and crowd-ram guards give maximum excavator-arm protection, even during the toughest jobs.

for the 55Z, including Perkins engines, Nachi and Bosch-Rexroth hydraulic components and Bridgestone tracks.

Quality componentry

The 55Z has an even more spacious cab than previous models, with storage galore, including a phone tray, stowage net and a cup holder. The whole area is accessed easily and safely via a large door.

A radio, 12V phone charger, powerful heater with window de-mister, and an optional, highperforming air-conditioning system with eight vents completes the picture.

The innovative new rotary controller and the easy-touch switches have been thoughtfully designed for operational ease of use, and with ergonomic electro-hydraulic dozer control as standard, operators can achieve smooth and precise grading control, alternating quickly between single- and double-acting auxiliary flow thanks to a convenient switch in the cab.

Fold back the cab door on the 55Z and it fits snugly within the counterweight length, out of harm’s way throughout the machine operation, and the hydraulic system boasts the latest O-Ring Face Seal (ORFS) hydraulic fittings, providing excellent sealing capabilities.

High-quality 400mm rubber tracks with interlocking links perform in even the most laborious applications, and JCB’s 400mm/550mm steel tracks are pre-drilled to make it easier to attach rubber pads.

Dedicated Road Liner Pads (Bridgestone GeoGrip™) are also available should individual segments need replacing.

JCB used only trusted premium manufacturers to supply the componentry

Comfort and control.

EQUIPMENT & PRODUCT REVIEWS

Mini excavator

Superior instrumentation

Digital screens are available in the operating station, with a simple user interface, customisable home screen and specific diagnostic information. For increased safety there’s a Thatcham approved immobiliser, eliminating the possibility of an unauthorised start, and having the software system Livelink and Datatag allows setting a geofence and machine working restrictions.

The switch panel and monitor are fitted with clearly identifiable, easy-touch buttons.

Potent performance

A Perkins 404D-22 engine drives the 55Z, a quiet, 2.2-litre unit delivering 35.7kW at 2000rpm and reduced operating costs in a small, efficient package. There’s also available a Tier 4 Final/Stage 3B engine option.

Tracking performance is smooth and precise, ensuring high dozer capabilities and fast travel times. To increase productivity, JCB’s auto kickdown motors automatically adapt to changes in terrain, increasing productivity and reducing operator fatigue.

Dipper tear-out forces of up to 29.0kN; combined with fast cycle times, enable unrivalled productivity, and by perfectly matching the boom and dipper, JCB has created optimal dig-end geometry, ideal for working and loading in confined areas with ease.

Zero Tail Swing

The Zero Tail Swing configuration offers concern-free manoeuvrability – especially in confined spaces – because the rear overhang outside the tracks is eliminated.

Reduced, Zero or Conventional Tail Swing configurations are available.

The 55Z is both durable and confidence-inspiring.

Hydraulic innovation

A premium, closed-centre hydraulic system provides improved flow sharing for smooth, precise and balanced operation during multifunctioning.

The programmable twin auxiliary lines provide high and optional low hydraulic flows to operate an array of attachments, increasing the machine’s versatility. Both auxiliary lines are electrically proportionally controlled and fully adjustable for optimum attachment control.

The optional four-way dozer can be angled

right and left which, combined with the dozer float function, makes levelling and backfilling work incredibly easy, even on inclines and uneven terrain.

Versatility attached

JCB now offers a range eco buckets, designed with fuel saving in mind, and JCB attachments provide ultimate performance, full JCB warranty compliance and optimum fit and operation.

The fully CE-marked, factory-fitted hydraulic quickhitch is an option to add for changing attachments quicker.

Safely does it.

Large track-frame width and a low centre of gravity helps to ensure stability is maximised, and the standard boom and optional worklight guards offer greater protection for vulnerable components in hazardous applications.

Optional LED lights accommodate the ‘follow-me-home’ function. When selected, the lights will remain on for three minutes, even when the machine is switched off, illuminating the area and allowing the operator to leave the site safely.

The 55Z offers greater visibility than JCB’s outgoing models, thanks in part to a 70/30 front screen split: for easy, safe trench digging and manoeuvring. www.landscapecontractor.com.au

43

EQUIPMENT & PRODUCT REVIEWS

Mini excavator

UHI excavators UHI (United Heavy Industries) is Australia’s compact-excavator specialist servicing a customers across the country from branches in Sydney, Brisbane, Melbourne, Adelaide, Perth, Townsville, Darwin and Wagga Wagga.

Here’s a selection of some the great machinery on offer.

Get the full specs and equipment inclusions at unitedheavyindustries.com.au.

UME 10T

10HP, swing boom, nine attachments

$11,990

UME 10T Engine Rated power Maximum torque Maximum grade ability Travel speed Wheelbase Track width Overall height

Koop192 10hp/7.6kW/3000rpm 25Nm/2860rpm 30° 1.3kph 910mm 180mm 2295mm

UME 12P

16HP, swing boom, expandable track, nine attachments:

$19,990

UME 12P Operating weight:1200kg Digging bucket capacity Fuel capacity Engine Rated power Displacement Flow rate

Koop192 0.03m³ 11 litres diesel Kubota D902 16hp/11.8kW/2300rpm 0.898 litre 18.4L/min

UME 15P

16HP, joystick control, swing boom, eight attachments:

$21,990

UME 15P Engine Rated power Maximum torque Maximum grade ability Travel speed Wheelbase Track width Overall height

44

LANDSCAPE CONTRACTOR

Kubota D902 16hp/11.8kW/2300rpm 51.9Nm/1800rpm 30° 2.0kph 1123mm 230mm 2320mm

EQUIPMENT & PRODUCT REVIEWS

Mini excavator UME 28

20HP, swing boom, eight attachments:

$39,990

UME 28 Operating weight Digging bucket capacity Bucket width Track width Engine Rated power Displacement Travel speed

2640kg 0.05m³ 500mm 250mm Yanmar 3TNV80-SPSY2 20hp/14.6kW 1.267 litres 1.4kph to 2.7kph

UME 80

63HP, hydraulic quick hitch, steel track, optional rubber pads:

$69,990

UME 80 Engine Maximum torque Maximum grade ability Operating weight LxWxH Digging bucket capacity Bucket digging force

Yanmar 4TNV98 2443Nm/1600rpm 35° 7.2T 5830 x 2150 x 2600 0.3m³ 52kN

XU 20

16HP, swing boom, extendable track, five attachments:

$31,000

XU 20 Operating weight Digging bucket capacity Bucket width Track width Engine Rated power Displacement Travel speed

1890kg-1970kg 0.048m³ 900mm 230mm Kubota 16hp/11.8kW/2200rpm 898cc 2.1kph to 3.9kph

XU 1320

75kw, 12.5T operation weight, seven attachments:

$145,000

• 75kw Deutz engine • Kawasaki pump and Toshiba valve • Free tilting hitch, hydraulic log grabber, ripper, 1200mm sieve bucket, 450mm, 600mm and 1500mm bucket • Free toolbox and filter set • Warranty: 3-year/3000-hour full warranty First two-year/2000-hour full labour and parts warranty Third year/1000-hour powertrain, labour and parts warranty www.landscapecontractor.com.au

45

EQUIPMENT & PRODUCT REVIEWS

Mini excavator

Kobelco and JP Gardens and Excavations Moving to Tasmania and choosing Kobelco excavators have been positive steps for this landscaping business.

J

P Gardens and Excavations is a familyowned and operated landscaping and excavation company determined to do landscaping the old way – ‘do it once and do it right’ – with a modern touch.

The company strives to create something unique that leaves customers feeling amazing in their own way and fits all their lifestyle and outdoor-living requirements.

In the 10 years JP Gardens and Excavations staff has been in landscaping, it’s tried a lot of machinery.

“We’ve been on CAT, Volvo, Hitachi, Kubota, Takahuchi…all these other brands,” said Jesse Penny, who, at 27, is at the head of a very fast-growing outfit and is totally sold on Kobelco machinery.

“I’d never been on a Kobelco before,” he said, gazing thoughtfully down the years.

“We originally started out in Canberra and moved to Tassie as one of the family members was looking for a bit of a change.

We loved it and haven’t moved back.

“We hired our first Kobelco from Page Hire down here at Spreyton, and they looked after us awesomely. Every business needs to grow, and since we bought our Kobelco machines we haven’t looked back. We’ve had nothing but reliability.”

The SK35SR features a unique blade design which prevents earth from falling behind the blade.

46

LANDSCAPE CONTRACTOR

The future’s looking good for JP Gardens and Excavations, with Jesse’s Kobelco fleet continuing to grow.

The machines

Jesse has recently taken delivery of a new Kobelco SK35SR-6 with cabin to run alongside the company’s SK17SR. The Kobelco SK17SR is a 1.7-tonne machine that’s ideal for work in tight spaces, like residential areas and industrial premises, and combines a compact design with a wide digging reach for efficient performance, excellent manoeuvrability, and tough durability to ensure an extended working life.

Jesse’s latest purchase, the SK35SR, is a 3.5-tonne machine with outstanding digging performance thanks to a multiple pump flow-sharing system providing pump flow of 38.4L/min and pressure of 23.0 MPa (relief valve setting). An Energy Conservation Mode – equipped with ‘S’

mode – lowers fuel consumption by up to 25% compared to previous models.

The SK35SR includes Kobelco’s exclusive iNDr cooling system which reduces heat and dust penetration with a short tail swing for when space is limited.

The SK35SR also has standard factoryfitted quick-hitch piping, a colour LCD monitor and a unique blade design which prevents earth from falling behind the blade. Maintenance on this machine is made easy with all the start-up checks able to be performed at ground level, with an easy-to-understand layout and cover design that simplifies access and saves time.

More to come

The future’s looking good for JP Gardens

EQUIPMENT & PRODUCT REVIEWS

Mini excavator

Outstanding digging performance thanks to a multiple pump flow-sharing system.

Jesse’s SK35SR features a short tail swing to allow him to work in tight spaces.

and Excavations, with Jesse’s Kobelco fleet continuing to grow.

What is it he likes so much about Kobelco excavators?

“One thing was obviously dealing with Dave and Matt from DLM Machinery at St Leonards, the Kobelco dealer here in Tassie,” explained Jesse. “They’ve been bloody awesome from the start.”

“In the way of Kobelco being different from other brands, overall it’s a comfy machine. Every digger’s got its own points and plusses, but the Kobelcos are smooth machines with good power, and they’re just comfortable all ’round, and you can virtually do anything from civil projects down to your small residentials.” Jesse told us.

The next purchase is already under way.

“I shook Dave’s hand and said we’d definitely be back to buy another one,” Jesse told us, “and we did. Hopefully we’ll be doing the same again in maybe a year or so’s time.”

An eight-tonner is likely to be next on the JP Gardens and Excavations shopping list, and there’s nothing surer than it’ll be a Kobelco. www.landscapecontractor.com.au

47

Join your industry association today!

Join your industry community and together we will raise the bar in landscaping, and help you build your dream landscaping business.

Find out what’s in it for you

www.landscapeassociation.com.au

l r

u

Latest equipment

New year, new grapple saw!

Why not kick off 2023 with a new way of working smarter – a grapple saw!

GRAPPLES High performance lift & load attachments

I

f you’re lopping and chopping trees, a customised grapple saw is a safer, more efficient way to work. It makes your excavator more versatile and it saves on manpower – a welcome innovation in these times when good workers are hard to find.

Swedish and Italian quality – fully customised

An Intermercato grapple saw combines the Intermercato Swedish grapple of your choice with a worm-drive rotator and an Italian hydraulic saw. All components are supplied individually, and Intermercato Australia will mount and install in-house. That means your kit is customised to create exactly the tool you need to blitz your workload this year.

Rigid mount or pendulum mount

The rigid-mount design is Intermercato’s preferred setup with a worm-drive rotator. This allows you to reach up, grab a limb and operate the saw. Once the limb is cut it will not fall and will be held in the same position. You can safely bring the limb to the ground. Intermercato Australia also has the capability to design and create a pendulum mount.

Let’s get technical

Most excavators only have two sets of auxiliaries, so a 12V or 24V solenoid may be required to share one of the hydraulic lines.

There are two options. You can share the saw and grab on the same line and leave the rotator on its own line, or you can couple the grapple and rotator on one line and have the saw on the other.

Or you may want to have another feed line installed to operate the saw. To power the solenoid, you will need o install a momentary switch in the cab.

Call now to find out how the right grapple can maximise your efficiency on the job.

1300 88 21 61

sales@grapples.com.au

0436 028 643

grapples.com.au Your kit is customised to create exactly the tool you need to blitz your workload this year.

Setup requirements

The main setup requirement for the saw is enough hydraulic flow, because your machine must have the correct amount of flow to power the saw’s requirements.

The next most important criterion is the return-to-tank line needs to be at least ¾” or 1” for the bigger saws. This drain line must go straight to the tank with no restrictions apart from a filter. A flat-face coupler has too much resistance, so a screwed connection is preferred.

There are four hydraulic saw options. The team at Intermercato grapples can advise you on the setup that best suits your needs.

To find out more, contact Robert today on 0436 028 643 or visit grapples.com.au. www.landscapecontractor.com.au

49

Innovative products

The Land Pride Powered Rake brings a variety of capabilities, including the ability to grade, level, shape, cultivate, renovate and pulverise across a wide range of surfaces.

Land Pride PR16 Series Powered Rake A multi-functional seedbed and surface preparation tool ideal for landscapers and turf-care professionals.

T

he Land Pride Powered Rake brings a variety of capabilities, including the ability to grade, level, shape, cultivate, renovate and pulverise across a wide range of surfaces.

Kubota Australia product manager, John Moloney, said the Land Pride Powered Rake is the ultimate tool for landscaping contractors looking for a versatile surface preparation and maintenance implement.

“The 60-inch or 72-inch working widths are well suited for smaller landscaping and turf renovation jobs, with a horsepower requirement of 25hp-60hp,” said Moloney.

“The 90-inch model is perfect for larger commercial jobs and requires 35hp-75hp.

“The attachment is capable of raking or windrowing soil, rocks and construction-site debris, while another common application is renovating gravel roadways and tracks. It’s an incredibly versatile implement.

“The Powered Rake is built to last with a range of features, including the wide-gauge wheels adjusting vertically to set working depth with tall and wide tyres to keep turning fluffy soil. The sealant prevents against punctures and the cast-iron chainguard housing protects the chain in harsh and hostile conditions.

“The carbide-tipped studs are the same used in the mining industry, so they are very tough with a long life and can be replaced one at a time where needed.”

50

LANDSCAPE CONTRACTOR

Additional standout features include QuickHitch compatibility, allowing quick connection and disconnection from the implement when a Land Pride Quick Hitch is added.

“The PR16 Series Powered Rake also has side plates with storage, allowing you to hold dirt with the rake for filling in low spots, and the material control deflector determines what size of material to let pass through the roller and what size to move out. These features make the PR16 Series Powered Rake one of the most versatile landscaping tools available.

Ideal for renovating gravel roadways. and tracks.

“The double roller chain takes the fluctuation loads from the roller in varying ground conditions and, due to the drive chain being enclosed in an oil bath with a drain plug, the sprockets are kept lubricated with minimum abrasion.”

Kubota Australia is providing a five-year gearbox warranty on the Land Pride Powered Rake.

Deliveries of the Land Pride PR16 Series Powered Rake range are available through your local Kubota dealer.

T e l : （03） 9775 1021 www. loadmaxxaustralia.com.au

Loadmaxx Aluminium Plant trailers Suit 1.7t -3t mini excavators Drop floor

Quick release safety pin

Models Available:

LMPT2200(2.2T) LMPT2500(2.5T) LMPT3500(3.5T) LMPT4000(4.0T)

120x60x8 High tensile aluminium

Spare wheel under bucket

LED water proof lights

Loadmaxx Aluminium Lawn Mower trailers

Models Available:

LMAT8X5 LMAT10X6 LMAT12X6

Innovative products The Ditch Witch® SK900: a stronger pound-per-pound punch than the competition.

Ditch Witch SK900 mini skid steer Muscle where you need it most.

W

ith a stronger pound-per-pound punch than the competition, the Ditch Witch® SK900 puts in the muscle on landscaping and construction-grade jobs with a lower ground drive speed and more power directed where it’s needed most – the hard-working attachments.

Optimised power

A new Yanmar® 24-HP (18.5 kW) diesel turbo engine allows for more torque where it matters so you get more done. Increased torque to the ground drive speed gives the

SK900 superior power to the attachment, outperforming the competition to dig, lift, and drive. When working at altitudes, the control system optimises performance, fuel efficiency and torque.

Efficient operation

A user-friendly round gauge shows engine issues as a code for more convenient diagnostics, while the manual throttle lever from the Ditch Witch® SK1550 has been added, enhancing the operator’s ability to manage engine speed for increased efficiency.

An improved ground drive hydraulic system bulks up the longevity of the machine while daily upkeep is made easier with an accessible fuel cover and thicker exhaust pipe, and The Ditch Witch® organisation offers a full line of compatible quick-change attachments.

Visit the ditchwitchcea.com.au product page to find out more, or ask your Ditch Witch CEA dealer about additional attachment options.

Dimensions (STD) Operating height, max std. bucket Hinge pin height, max Overall height of machine Overall length of machine, std. bucket Overall length of loader, no attachment Wheelbase/track length Ground clearance, centre, min Ground clearance, side, min Performance Ground drive speed – forward/ reverse Ground pressure

The Ditch Witch® organisation offers a full line of compatible quickchange attachments.

52

LANDSCAPE CONTRACTOR

Angle of departure Rated operating capacity (35% of tipping capacity) Machine weight (no attachment, fluids full) Ground clearance, centre, min Ground clearance, side, min

2.6 2.10m 1.45m 2.67m 2.19m 1.09m 226mm 94mm

6.4kph 180mm tracks – 0.36bar 230mm tracks - 0.20bar 30° 422kg 1447kg 226mm 94mm

More power directed where it’s needed most – the hard-working attachments.

Hydraulic system Auxiliary circuit Flow rate Pressure

Double gear pump Pump 1: 23.8lpm.

Pump 2: 21.5lpm 207 bar

Power Engine Fuel Gross power rating (SAE J1995) Emissions compliance Number of cylinders Displacement Bore Stroke Rated speed

Yanmar 3TNV80FT Diesel 18.5kW EU Stage V Three 1.27 litres 80mm 84mm 2600rpm

Fluid capacities Hydraulic reservoir capacity Engine oil, with filter Fuel tank capacity

35 litres 4.7 litres 40 litres

Noise level Operator ear sound pressure Sound power

89dBA 99dBA

Battery SAE reserve capacity rating SAE cold crank @ 0oF (-18oC) Electrical system

110 min 800 amps 12V

The SK900 puts in the muscle on landscaping and construction-grade jobs.

Optimised performance, fuel efficiency and torque.

Daily upkeep is made easier with an accessible fuel cover.

* Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. www.landscapecontractor.com.au

53

Innovative products

Hybridization: propulsion options Hybridization’s benefits are most often linked to productivity and fuel consumption.

And both lead to greener, more sustainable business outcomes.

H

ybridization is used to drive vehicle efficiency two ways. The first is about utilising the engine’s power to generate electrical energy to more effectively power various loads. The second is more traditional and is about off-loading some of the engine’s energy demands with a second power source, a battery, and using that source to run other functions traditionally tied to the engine.

With over a million operating hours in the field, the 944K offered an engineering and component foundation for future development that was tapped into with Deere’s newest E-Drive offering.

Increased efficiency

Will Cross, supervisor for electrification architecture and systems engineering, said many Construction & Forestry use cases are transient in nature, making those product lines ideal for hybridization.

“Our larger equipment will continue to have internal combustion engines for the foreseeable future due to energy density, so the question is: ‘How will we reduce carbon emissions for those systems?’” Cross said.

“Reducing the carbon content of the fuel itself is one important path, but we can also make our power generation and vehicle systems utilise that fuel more efficiently. We can start by electrifying vehicle systems to utilise engine power more effectively. Mechanically decoupling loads from the engine, as well as the inherent efficiency of electric drives, all contribute to improved vehicle efficiency.

“This will continue to be fundamental to many of our products across the Deere portfolio.”

C&F’s shining exaample in this conversation is its 944K loader, known for its fuel efficiency and productivity. With over a million operating hours in the field, the 944K offered an engineering and component foundation for future development that was tapped into with Deere’s newest E-Drive offering, the 850 Dozer¹.

Deere 850 Dozer

The dozer, showcased at the CONEXPO/ CON-AGG 2023, offers different modes — giving customers the choice of optimising productivity or fuel economy depending on the job.

“The 850 is used in many earthmoving applications, including 54

site development and roadbuilding,” said Kat Roberts, product manager for dozers and crawler loaders. “Deere is still in the process of validation and testing, but we are seeing improvements in both fuel efficiency and productivity over traditional machines.”

Minimising idle time

Deere can further improve efficiency and productivity by adding a secondary energy source, a battery, to help minimise machine idle time.

Led by electrification advancements and hybridization opportunities, John Deere Power Systems (JDPS) is developing technologies to turn off the engine when minimal power is needed, while still providing power to loads such as cab heating and air conditioning. This helps deliver the benefits of less fuel burned, reduced greenhouse gas emissions, retained machine value,

lower operating costs due to fuel and oil consumption, and reduced hour accumulation.

This also contributes to reduced regular maintenance and repair costs overall.

The road ahead

Deere believes hybrid equipment will not only provide near-term carbon and productivity benefits, but develop Deere’s vehicle architectures to reduce alternative fuel usage and costs when they arrive. Deere will continue to aim to engineer systems that most effectively utilize engine power to provide operating cost and productivity benefits to customers. ¹ Deere, The Dirt Winter 2021, www.deere.com/assets/pdfs/common/ industries/construction/publications/the-dirtwinter2021-dmag259c us.pdf (2022).

LANDSCAPE CONTRACTOR

EGO23-

The world’s leading battery powered riding mower just got an upgrade. Introducing the new Z6 107cm E-STEER™ Stamped Deck and 132cm Lap Bar Fabricated Deck models. Now, it’s time to take your lawn care game to the next level.

EGO23-17824_Z6 E-Steer_Full Page Press Ad_210x277mm-V03-FA.indd 1

31/3/2023 4:01 pm

Innovative products

Formboss Greenlines Gardenware/FormBoss likes things simple, easy-to-use and effective.

From straight lines to sweeping curves that conform to any shape, FormBoss will enhance a garden’s aesthetic and improve any property’s value.

G

reenlines Gardenware kicked off in 2005, and founder Gerry Boerlage was on a mission to find an alternative to the heavy, time-consuming, labour-intensive and costly traditional garden-edging systems in use at the time. His research and development resulted in him founding and launching Formboss®, an industry-first garden-edging system with a new level of safety, durability and ease of installation, which has become the preferred garden-edging system for most landscaping projects across Australia.

Almost 20 years later Greenlines Gardenware has become the supplier of the country’s most recognised and often-used brand, Formboss, in metal garden edging, with distributors and resellers nationwide.

Founder and CEO Gerry Boelarge said, “Greenlines Gardenware is a 100 per cent Australian-owned company headquartered in Melbourne, focused on innovation for both its products and how it can continuously work well with landscapers.”

Specialising in simple, easy-to-use 100 per cent Australian-made steel, FormBoss garden edging products allow for a beautifully built and finished garden that will set the standard for any neighbourhood or region. A team of experts is available to assist with any queries, whether it’s advice on a project or a solution to any landscape-edging challenges.

FormBoss – the metal gardenedging hero

From straight lines to sweeping curves that conform to any shape, FormBoss will 56

LANDSCAPE CONTRACTOR

enhance a garden’s aesthetic and improve a home’s value. It’s an easy, uncomplicated solution, and Greenlines Gardenware, through its extensive stock holding at its warehouse and manufacturing base in Melbourne, has supplied many thousands of kilometres of FormBoss — some to projects boasting several kilometres of metal garden edging alone!

“Our ability to provide customers with what they want, when they want it, including any customisation, is supported by our extensive national distributor and reseller network,” said

Greenlines Gardenware carries an extensive stock holding at its warehouse and manufacturing base in Melbourne.

Industry leader, founder and CEO of Greenlines/FormBoss, Gerry Boerlage.

Peter Boerlage, Sales Manager FormBoss.

“That means landscapers, council project managers, architects and designers can confidently plan, execute and deliver on their projects.”

A company you can trust

Be confident in the professional level of expertise when choosing FormBoss metal garden accessories.

For more information log on to formboss.com.au. or call 13 11 37.

THE EU22i PACKS A PUNCH!

2200 WATT MAX OUTPUT * INVERTER TECHNOLOGY BUILT IN ECO-THROTTLE LIGHTWEIGHT AT 21KG VERY QUIET OPERATION

Now available for Click & Collect!

*1800VA rated output

Subscribe today …and enter the draw to win a

Husqvarna 580BTS blower Valued at $1199 RRP All prizes drawn June 30, 2023.

All current and new subscribers will enter the draw. Staff, friends or relatives of Prime Creative Media are not eligible to win prizes.

Prize is non-negotiable.

CHOOSE FROM

ONE YEAR $44 v 12-MONTH SUBSCRIPTION v 6 ISSUES v FREE DELIVERY

TWO YEARS $77

OptimusZ

v 24-MONTH SUBSCRIPTION v 12 ISSUES v FREE DELIVERY

Latin for ‘Th e Best’







  ­  ­

FROM

eMAG $5.99 v DIGITAL VERSION

To subscribe, either scan this code, call (03) 9690 8766; or visit landscapecontractor.com.au

Testimonial A huge thank you to Husqvarna and Landscape Contractor Magazine for this fantastic backpack blower. One of our old Husqvarna blowers was making a funny noise the morning I received the news we had won – so the timing was perfect!

– Martin Rodgers, Australian Heritage Landscaping

SUBSCRIBE FOR YOUR CHANCE TO WIN A HUSQVARNA 580BTS BLOWER VALUED AT $1199 RRP

TEST DRIVES:  Cub Cadet Pro 560 S

PLUS:  Mowing equipment  Chainsaws and pruning equipment

 Eye on the industry  Association news

Test drive

The PRO Z 560 S is a commercial machine and built to stand contractor punishment.

Cub Cadet PRO Z 560 S A quality, robust machine WORDS: ANDREW TULLOCH

C

ub Cadet has become increasingly popular in Australia in recent years.

The brand is no newcomer to the mower game with its first machines made in Kentucky in 1960. After 63 years of manufacturing, constant research and development, the results we see today in this new PRO Z 560 S is a machine with capabilities far beyond its 1960’s ancestors.

Built to last

At first glance the PRO Z 560 S looks a little different to most zero-turns as it has a steering wheel rather than lap-bar controls.

This development by Cub Cadet, known as ‘Synchro Steer’, uses the zero-turn capability of the rear wheels integrated with the front-wheel steering. The front wheels are steer wheels also, not castor type as on conventional zero-turns, and this gives much more stability on slopes, with the machine rated for use on up to 20-degree inclines. Also, with all four wheels turning, there is considerably less damage to the turf surface when making tight turns. That results in a neater finish, especially on sloping terrain.

60

LANDSCAPE CONTRACTOR

With all four wheels turning, there is considerably less damage to the turf surface when making tight turns.

A rubber-bush-dampened footrest platform makes it easy to get comfortable and stay comfortable.

The operators’ comfort is assured, with a weight-adjustable suspension seat, adjustable armrests, forward/back slide adjustments and an angle-back adjustment.

www.landscapecontractor.com.au

61

Test drive Cub Cadet PRO Z 560 S Engine

Kawasaki FX921V

Output

31hp

Cutting width

60” (152cm)

Cutting heights

1”-5”. 16 positions

Fuel capacity

56 litres

Fuel capacity

16.5kph (fwd) 8.1kph (rev)

The PRO Z 560 S is a commercial machine and built to stand contractor punishment. The 60-inch fabricated deck and top and bottom reinforcements are manufactured from 7-guage steel – hence the ‘Triple 7’ name of the deck – and adding to the deck toughness are leading-edge and side reinforcements of ¼” and 5/16”.

The front steer wheels hang on solid, cast-iron axles, increasing the toughness in the front end where the highest impact and stress occurs. Continuing the durability throughout, the machine sees a fulllength 3/8” x 5” chassis and a very solid 62

LANDSCAPE CONTRACTOR

rear cowl protecting the engine from the inevitable knocks.

Ergos and drive

Sitting in the operators’ seat is a comfortable experience even on rough terrain, with a weight-adjustable suspension seat, adjustable armrests, forward/back slide adjustments and an angle-back adjustment. Combined with a simple-tooperate adjustable steering column and rubber-bush-dampened footrest platform it is easy for any operator to get comfortable and stay comfortable for a long day.

The power plant on the PRO Z 560 S is the impressive Kawasaki FX921V, a 999cc engine producing 31hp and giving ample power for the 60” cut size and 12cc Parker transmissions that drive the machine. This engine is proven for this type of application and known for its reliability, power and longevity. There is ample room around the engine for all maintenance task, and a handy oil drain hose enables fast and clean oil changes. Huge dual fuel tanks carry 56 litres, ensuring long intervals between refuelling.

A very impressive commercial warranty applies to the PRO Z 560 S: three years on the unit and the engine and five years on the deck shell.

The front steer wheels hang on solid, cast-iron axles, increasing the toughness in the front end where the highest impact and stress occurs.

Operation

I like the simple, drop-in pin-height adjustment system. It’s easy to see desired heights and make changes, even while on the move. A travel-lock position to hold the deck in the highest position is also fitted and simple to operate.

Another great feature is the quickrelease hydro lever located to the left of the operators’ seat. It allows the operator to release the hydro drives if the machine needs to be pushed for any reason. It’s much better than most other machines where the hydro release is buried in the

Huge dual fuel tanks carry 56 litres, ensuring long intervals between refuelling. depths of the mower and awkward to use.

Operating the machine was a pleasure.

It’s reasonably fast with a top speed of 16.5kph and once used to the steeringwheel operation it’s very manoeuvrable at speed, even around obstacles.

The Triple 7 deck cut and expelled grass with force, leaving a neat even finish with only one pass on very long Buffalo and Kikuyu grass. I also operated on some very bumpy and uneven terrain where the grass wasn’t long, but I was able to operate at full speed and still be comfortable in the operator’s seat.

Summing up

A very impressive commercial warranty applies to the PRO Z 560 S: three years on the unit and the engine and five years on the deck shell. This would give great peace of mind for commercial operators.

The ability to have a universal machine that is great on level and undulating ground, as well as steep slopes to 20 degrees, is also a a very attractive proposition for contractors as it enables them to have one machine for two jobs, rather than a specific slope mower and another for general use. www.landscapecontractor.com.au

63

EQUIPMENT & PRODUCT REVIEWS

Mowing equipment

T GREENWORKS’ ultra-high-performance mowers offer the best centre of gravity in the industry and can safely and confidently tackle slopes up to 15°.

GREENWORKS OptimusZ ride-on zero-turn mowers

The GREENWORKS® 82V OptimusZ 18kWh and 24kWh commercial riding mowers are the most powerful and advanced riding zero-turn mowers on the market.

G

REENWORKS’ ultra-high-performance mowers are equipped with the most advanced 19K Constant Smart Cutting System™ and patented PowrTraq Smart Drive System™. They also offer the best centre of gravity in the industry, so operators can now safely and confidently tackle slopes up to 15° and cut grass at up to 26kph – the fastest in its class.

OptimusZ is the ultimate productivity machine. Engineered for all-day commercial use, the built-in battery module, with safe LFP cell technology, allows landscapers to mow up to 16 acres and offers six hours runtime for the 18kWh models. The 24kWh models, depending on conditions, can cope with a massive 21 acres and give up to eight hours runtime.

Quiet operation and high-intensity, 360° LED lighting opens the door for earlier starts, longer working hours, more business opportunities and increased profitability.

Features

• Bolt-on replaceable deck, baffles and rollers • Unique, ergonomic handle controls • 2” receiver and rear tow point • State-of-the-art 4.3” LCD touchscreen • 17 deck height positions

• Industry-leading reinforced casters • Rubber discharge flap with hook loop • Two cup holders, USB-A and C ports and storage pocket.

Find out more at greenworksaustralia.com.

Cut size

Model numbers

Part numbers

48” OptimusZ

Model No: CZ48R18X

18kWh Part No: 7403007AU

Model No: CZ48R24X

24kWh Part No: 7403107AU

Model No: CZ52R18X

18kWh Part No: 7401707AU

52” OptimusZ 60” OptimusZ

5 W

Model No: CZ52R24X

24kWh Part No: 7403207AU

Model No: CZ60R18X

18kWh Part No: 7401807AU

Model No: CZ60R24X

24kWh Part No: 7403307AU

Unique, ergonomic handle controls.

The range

GREENWORKS has models available in a variety of power outputs and size categories so professional users can choose the most cost-effective option for their intended use.

A list of available models are shown.

64

LANDSCAPE CONTRACTOR

w

THE BEST IS HERE 5 YEAR/2000 HOUR WARRANTY

AVAILABLE IN 48”, 52” & 60” DECKS, 18kWh & 24kWh MODELS.

www.greenworksaustralia.com greenworksaustralia

greenworks_australia

VIC/SA/WA/TAS James Davies - 0432 190 155 james@jakmax.com.au QLD/NSW Gary Harvey - 0476 442 223 gary.h@jakmax.com.au

EQUIPMENT & PRODUCT REVIEWS

Mowing equipment

Going electric Don’t be afraid to make a big improvement to your business.

C

hange is always difficult.

Walking away from something you’ve known for pretty much your whole life can move from difficult into the realms of challenging and even confronting.

That’s how it feels to most experienced landscapers considering making the change from internal combustion motors to electric.

The idea of hearing protection, carrying fuel, filters, spare plugs and tools – and hoping the thing will start after the tank was run dry at full revs – are all second nature to a lot of very experienced professionals.

And while there are undoubted environmental benefits in going electric, surely a Euro-5 compliant small-bore fourstroke can’t be doing much damage, can it?

There’s a lot more to joining the fastgrowing throng of electric converts than looking after the environment. There’s very real short-term rewards for owners and operators as well.

Safety

In all the justifiable excitement at being able to work with zero emissions, the safety advantages of electric OEP, especially zeroturn mowers which are generally intended to cover large areas and run for extended periods are considerable. Probably the most obvious is low noise levels.

EcoTeq’s Mean Green zero-turn mowers are a great example, with the entire range 66

LANDSCAPE CONTRACTOR

running at less than 80dB. That means: * The risk of hearing loss for the operator is minimised, as is disturbance in noisesensitive environments – like working near schools, elderly care centres and nearby neighbours * There’s no need for hearing protection to meet WHS legislation requirements, although EcoTeq does still recommend hearing protection as a safety measure.

That’s just sensible for any prolonged exposure to low-level noise, and * There’s no noise produced by the engine.

The only sound is the soothing swish of blades cutting grass (and a job being done).

Low-voltage battery systems

Another great characteristic of a modern, purpose-built zero turn like those in EcoTeq’s Mean Green range is the use of high-tech battery technology. Risks associated with maintaining electric equipment are vastly reduced thanks to low-voltage systems, and that helps to contribute to the simplicity of the whole unit. There’s no specialist training or qualifications required for techs working a Mean Green zero turn (as is currently required to service electric cars, for example).

No oil spills

Being designed and built from the groundup as an electric zero-turn mower means

there are no hydraulics, no fossil fuel and no oil required to run and maintain Mean Green mowers. There’s no patches on the shed floor or puddles in the trailer, and the risk of pedestrians slipping on sidewalk fluid spills is eliminated. There’s also no risk of petrochemicals seeping into vulnerable waterways or customers gardens.

No fumes

Even the very newest internal combustion engine, compliant with the most rigorous environmental standards, will still have exhaust gasses. There’s no other possible way for an engine burning fossil fuels to work. But there are no fumes or exhaust gasses produced by a Mean Green zero turn, no matter how hard it works, or for how long.

That’s good for the world we live in, for sure, but it’s also good news for the operator.

No fumes means the risk of respiratory irritation from extended exposure is eliminated, comfort is maximised, and even the most environmentally conscious passerby will smile approvingly and offer a greeting.

And because there’s very little sound from a Mean Green zero turn, the operator can offer a cheery reply and continue on completing another job with a minimum of interruptions.

Going electric is a big step, for sure, but it’s a step into a cleaner, more comfortable and far more efficient future.

EQUIPMENT & PRODUCT REVIEWS

Mowing equipment Good news for the operator One of the key features driving TW Horticultural Services’ interest in EcoTeq’s electric zero-turn mowers was low vibration. An operator on the team suffers referred elbow pain.

“Knowing about the constant impact from vibrations, it was one of the

things I was interested in checking when I test drove the Rival,” said coowner, Brenton Waite. “The reduction in pain management of his elbow since using the Rival has been quite noticeable. We’re all really impressed with the machine.”

The safety advantages of electric OEP, especially zero-turn mowers, are considerable.

Zero Emission Solutions

EcoTeq’s Mean Green zero-turn mowers run at less than 80dB.

www.landscapecontractor.com.au

67

EQUIPMENT & PRODUCT REVIEWS

Mowing equipment EGO is about to take ultraperformance to the next level with the new Z6 107cm E-STEER™ Stamped Deck and 132cm Lap Bar Fabricated Deck models.

EGO’s ‘Sports Mowed’ Z6 riding mower just outclassed itself.

I

t was already the world’s leading battery powered riding mower, outperforming petrol without the noise, fuss or fumes. Now, EGO is about to take ultra-performance to the next level with the new Z6 107cm E-STEER™ Stamped Deck and 132cm Lap Bar Fabricated Deck models. If you need to step up your lawn-care game, look no further.

Time to switch gears

It’s not just a new way to mow. It’s a new way to drive. The new 107cm Z6 with E-STEER™ puts revolutionary features in the palm of your hands. Now you’ll have the added precision of a steering wheel which lets you handle any turf with ease. And most The added precision of a steering wheel with a backlit LED screen which allows control of a whole host of functions at the push of a button.

importantly, it’s a whole lot of fun.

On the front you’ll find a backlit LED screen which allows control of a whole host of functions at the push of a button, including driving and blade speeds. You’ll also find the power-status indicator up top too, so you won’t have to stop what you’re doing to check your Z6’s battery life.

On the back, there’s two rear paddles.

It’s the kind of detail that really puts the sports in ‘Sports Mowed’, allowing you to switch into reverse with ease. And if it’s a lazy Sunday, there’s a cruise-control mode too. Just turn it on and let your Z6 handle the rest.

The Z6 E-STEER™ features four independent brushless motors powered

by four 12.0Ah 56V ARC Lithium™ batteries.

That’s the equivalent of a 22-horsepower engine and enough juice to comfortably cut up to two acres of lawn. Better yet, it can hold up to six batteries for an extra boost.

EGO calls it Peak Power™ performance.

Sometimes bigger is better

Some backyards demand a bit more than others. That’s why EGO is also introducing the 132cm Lap Bar Fabricated Deck model.

With welded steel as opposed to a pressed plate, it’s perfect for tackling the kind of yard other ride-on mowers just can’t seem to get around.

Stepping up from the standard four brushless motors, the 132cm Lap Bar Fabricated Deck Z6 has five, which puts it up against a 25-horsepower engine. It really packs a punch. And with a 30% bigger cutting blade, it’ll make quick work of grass, shrubs, bark and just about anything else you throw at it.

Welcome to the family

It goes without saying that no two backyards are the same. That’s why all Z6 models feature a complete zero-turn radius with 10 cutting-height positions, ranging from 25mm to 100mm. All that grass can either be mulched or side discharged, and if you need a cleaner finish, there’s a bagging kit sold separately too. No need to stop. Just ride on.

Of course, each Z6 has been designed to cover a fair amount of ground, and you’ll have three driving modes at your discretion.

The control and standard functions let you manage your power output to suit the job 68

LANDSCAPE CONTRACTOR

EQUIPMENT & PRODUCT REVIEWS

Mowing equipment at hand. And the sports mode? We’ll let you figure that one out for yourself.

You won’t be waiting to re-charge all day either. The Z6’s 1600W charger is the industry’s fastest, topping up four 10.0Ah batteries in two hours and four 12.0Ah batteries in under three. And when you’re running low on charge, the Z6 will direct you to the nearest battery bay – which will probably be in your garage. Clever, isn’t it?

On that topic, every Z6 has world-first compatible rider technology, which means it uses the same batteries as every other EGO tool. So, when you’re done with the lawn, pop open the battery bay and power up your EGO Blower, Chainsaw or Line Trimmer, then get stuck into the rest.

There’s a few extra bells and whistles too. Like adjustable seat suspension for total comfort, front, side and rear LED lights, charging port, cupholders and IPX4 weather-resistant construction. Rain, hail or shine, there’s not much that can get in the way of a Z6 Zero Turn Riding Mower.

Spoilt for choice

Out of the box, you’ll have your Z6 model of choice, mulching plug, four 12.0Ah batteries for new models or four 10.0Ah batteries for the standard, and a wall-mounted charger.

Peak Power+™ Technology combines the power of up to six EGO 56V ARC Lithium™ batteries to deliver the power and performance of a petrol mower.

There’s a domestic five-year product and three-year battery/charger warranty, too.

We’ve got you covered.

It’s about time you leave petrol in the dust where it belongs. Order your new Z6 today

and jump on the world’s most awarded cordless battery platform. You’ll never look back.

Find out more at egopowerplus.com.au.

The z6 is perfect for tackling the kind of yard other ride-on mowers just can’t seem to get around.

www.landscapecontractor.com.au

69

EQUIPMENT & PRODUCT REVIEWS

Mowing equipment

Cub Cadet’s Synchro-Steer™ provides unmatched stability on slopes of up to 20°.

LCM0523

The Cub Cadet Zero Turn Mower Cutting everything, including downtime.

T

he new Cub Cadet PRO Z 560 S is a force to be reckoned with.

Featuring Cub Cadet’s Synchro-Steer™ Technology for safe, stable handling on steep slopes, incredible zero-turn manoeuvrability and heavy-duty construction, push your productivity even further now with a larger 60” deck for the bigger jobs.

With an incredible combination of strength, comfort, productivity-enhancing features and heavy-duty construction, the PRO Z 560 S Series gives you the ultimate power and performance you demand from a commercial grade zero-turn.

Steering-wheel control makes the The PRO Z 560 S is now available at your local Cub Cadet dealer.

70

LANDSCAPE CONTRACTOR

Pro Z 560 S tough to beat. Cub Cadet’s Synchro-Steer™ with four-wheel steering helps eliminate turf damage and delivers unmatched control and stability on slopes of up to 20°. Responsive steering gives a fast and professional cut and ultimate manoeuvrability, helping cover acres up to 10% faster than comparable lap-bar units.

Built safe and strong, the heavy-duty construction of the fully reinforced frame and fabricated decks are designed to handle tough conditions all day, every day. The three-position, easy adjust ROPS (Rollover Protection System) offers added protection for tough, hilly terrains giving additional peace of mind.

Strength and durability are enhanced

by Cub Cadet’s Triple Guard™ Corrosion Defense System that delivers automotivegrade corrosion resistance against wear and tear. This defense system ensures complete protection of your machine’s critical components for years of reliable performance and an ongoing professional appearance. Add the larger 60” fabricated cutting deck and you will be cutting efficiently for years to come.

The Commercial grade 12cc Parker™ Dual Transmissions and heavy-duty Kawasaki®

engines make cutting areas with thick grass a breeze. With forward cutting speeds of up to 16kph and reverse speeds of 8kph, the PRO Z 560 S offers the ultimate in efficient cutting, making short work of difficult areas.

Productivity-enhancing features are complemented with added comfort designed to keep you mowing at your peak for longer periods. Comfort extras like the high-back seat with padded armrests and lumbar support with dial suspension, the adjustable steering column for all types of operators and ISO-mounted foot base that helps reduce vibrations through the operator’s feet give all-day comfort for all-day mowing. The 560 S is designed to minimise operator fatigue making it the ideal zero-turn for commercial users with a roomy operator station, intuitive panel and easy deck lift.

The PRO Z 560 S Series is now available from the Cub Cadet Commercial Dealer Network and features a 31HP Kawasaki® FX921v engine and a 152cm (60”) triple blade, fabricated side discharge deck.

Book a test drive today at your local Cub Cadet dealer.

Find out more at cubcadet.com.au.

E

D E R E E IN

G N E FFICIENCY. E R FO

PRO Z 560 S With an incredible combination of strength and comfort, the PRO Z 560 S Series is a force to be reckoned with. The steering wheel, with Cub Cadet’s Synchro-Steer™ Technology, helps eliminate turf damage and delivers unmatched stability on up to 20° slopes helping you cover acres up to 10% faster than comparable lap bar units.

Visit www.cubcadet.com.au to learn more.

BUILT DIFFERENT

PRO SERIES

EQUIPMENT & PRODUCT REVIEWS

Mowing equipment

The Mower Supastore One of Brisbane’s premier outdoor power equipment centres

T

he Mower Supastore was established in December 2003 and has fast become one of Brisbane’s premier outdoor power equipment centres.

With a massive showroom and a fully equipped onsite workshop, The Mower Supastore is ideally suited to meet all of your outdoor power needs.

• Current location for 20 years – New owner Chris Doosey and Troy Horan • One of the largest stores in SE Qld – located in Brendale • Large range of brands – Toro, Rover, Polaris, Stihl, Victa, Echo, Atom, Cub Cadet, Bushranger, Gravely, Cox, Shindaiwa, Honda, Masport, Mowmaster and Solo

• Large machinery workshop and showroom • Huge range of parts and accessories • Open seven days a week • Online store • Friendly staff with years of experience • Huge range of stock all year round.

Ten good reasons to purchase your next outdoor power equipment from The Mower Supastore rather than a hardware chain: 1. All the best prices 2. All the best brands 3. Everything under one roof, including the workshop 4. Easy parking with trailer access 5. Unbeatable after-sales service 6. All equipment assembled, started and tested 7. Interest-free finance available 8. Delivery available 9.

Package deals available 10.

Warranty repairs done in store.

72

LANDSCAPE CONTRACTOR

sales@tmss.com.au 1/245 Leitchs Rd, Brendale QLD 4500

www.mowersupastore.com.au

ONE OF THE LARGEST IN SE QLD HUGE RANGE OF STOCK ry workshop  Large machine of products  Biggest range parts +  Huge range of accessories a week  Trading 7 days  Online store  Friendly staff formation

Call for more in

(07) 3205 1299

Shop Online

 POLARIS  TORO  STIHL  CUB CADET  ECHO  BUSHRANGER  GRAVELY  COX  ATOM  VICTA  SHINDAIWA  HONDA  MASPORT  MOWMASTER  ROVER  SOLO

Chainsaws & pruning equipment

Built to last, designed to perform.

Looking for a chainsaw that can handle even the toughest jobs? Husqvarna has got you covered with their line-up of professional chainsaws.

With unbeatable power, outstanding performance, and exceptional design quality, you can count on Husqvarna’s 500 Series chainsaws to deliver.

H

usqvarnarecognises the high demands of the landscaping industry and has designed their professional chainsaws with those needs in mind. The 500 Series chainsaws are ergonomic and easy to use, making them a popular choice for professionals. These chainsaws are built to last with powerful engines and long-lasting components, ensuring they can handle even the most challenging tasks.

No matter what your job entails, whether it’s felling trees, pruning branches, or cutting firewood, Husqvarna has a chainsaw that’s perfect for the job. From the smallest to the largest model, each chainsaw in the 500 Series delivers unbeatable power and performance.

Professional chainsaw range

• 565 AutoTune™ -70.6 cc - 3.7 kW - 20” Bar 3/8” Chain - 6.5 kg • 550 XP® II - 50.1 cc - 3.0 kW - 16” Bar - .325 Pixel Chain - 5.3 kg • 562 XP® AutoTune™ - 59.8 cc - 3.5 kW - 20” Bar - 3/8” Chain - 6.1 kg • 572 XP® - 70.6 cc - 4.3 kW - 20” Bar - 3/8” Chain - 6.6 kg

More power and a higher level of performance.

• 585 - 86.0 cc - 5.1 kW - 24” Bar - 3/8” Chain - 7.5 kg • 592 XP® - 92.7 cc - 5.6kW - 24” LW Bar 3/8” Chain - 7.4 kg • 3120 XP - 118.8 cc - 6.2 kW - 28” Bar - .404” Chain - 10.4 kg

Key Features

• User-centric design • Impressive chain speed and power-toweight ratio • Husqvarna X-Torq® Engines • Husqvarna Fleet Services™ compatible

• Husqvarna Connect • Air Injection™ This season, take advantage of hot prices on a select range of professional chainsaws.

Husqvarna 550XP from $1469.* Scan the QR code to explore the Husqvarna range further. * Offer valid from 01/04/23 - 31/07/23 at participating Husqvarna Dealers only, while stocks last on select chainsaw models.

Visit husqvarna.com/au for details.

Autumn campaign hot prices!

Designed for professional use.

74

LANDSCAPE CONTRACTOR

Professional 500 series Chainsaws from $1469* (Refers to 550XP®)

M E B

MAKE YOUR EVERYDAY BETTER

CATALOGUE OUT NOW Scan the QR code to check out the latest deals from Husqvarna!

A Husqvarna chainsaw for every challenge Are you in search of a chainsaw that can handle even the toughest jobs? Husqvarna’s lineup of professional chainsaws are expertly crafted to tackle the demands of all-day cutting, felling, and pruning with ease. With unbeatable power, exceptional performance, and superior design quality, every model in our range is built to help you get the job done right. Try one for yourself and experience the Husqvarna difference. Learn more at husqvarna.com

*

All offers valid 01/04/2023- 31/07/2023, or while stocks last, at participating Husqvarna Dealers only.

HUSQVARNA 550 XP® II

Chainsaws & pruning equipment

Cut your way through thick and thin With the solo by AL-KO range of chainsaws.

The 6436 Petrol Chainsaw is a lightweight, easyto-use compact saw ideal for lopping branches, pruning small trees or cutting up firewood.

E

very solo by AL-KO garden care and forestry technology product is designed with the highest precision and using the latest technology, delivering the right performance for the home, while proving powerful enough for the serious user. From compact saws for household use to high-performance professional saws, the chainsaw range from solo by AL-KO has it all. All saws have the same high, uncompromising quality, safety, and user-friendly features.

The powerful two-stroke engines combined with chain and bar combinations appropriate for the respective model always ensure effective and clean cutting results.

The perfect all-rounder for home and garden use

Chop off branches, prune small trees or cut up firewood – all of these are no problem for the 6436 Petrol Chainsaw, a lightweight, easy to use compact saw. With a displacement of 35.2cc and output of 1.45kW, it can tackle any job around the home and garden. The genuine Oregon bar and chain (35cm / 3/8” spec) guarantee great cutting performance and a long service life.

CHAINSAWS built to last

More power for the serious user

The solo by AL-KO 6656 petrol chainsaw is fast, powerful, and extremely robust; the top model among the solo by AL-KO professional saws will win you over with a 55.5cm³ displacement and 2.4kW of power. It has a weight-to-power ratio of only 2.3kg/kW, and is maintenance-friendly, featuring a three-part forged crankshaft and a 20” (50cm) Silver Streak bar with ⅜” chain sure to impress, providing a long service life.

These solo products come with a four-year warranty. For more information contact your local Masport Territory Manager by calling 1300 366 225, or to view the full range visit solobyal-ko.com.au.

76

LANDSCAPE CONTRACTOR

www.solobyal-ko.com.au

Chainsaws & pruning equipment

FELCO tools For all commercial and domestic applications

F

ELCO’s aim has always been to offer quality, innovative and durable solutions to commercial pruning and cutting markets across the globe. Those customers who enjoy the satisfaction of a job well done must have access to the best cutting and pruning tools.

FELCO has forever sought to produce very high-quality tools by making use of precision technology and manufacturing procedures, always with a single goal in mind: product excellence and functionality for customers.

This is why FELCO offers a lifetime guarantee on its hand-forged aluminium handles – a promise to you of FELCO and Swiss-made quality.

Long life

FELCO tools are designed to work in harmony with nature. Pruning professionals worldwide appreciate FELCO’s clean,

precise-cutting tools because they guarantee the quick healing of the pruning wound.

However, FELCOs respect for Mother Nature does not end there. The company’s robust tools and long-held philosophy of providing spare parts for the life of tools combine to extend tool life, thus minimising needless waste.

FELCO tools focus on: • Ergonomics: comfort, lightness, and effort reduction • Replaceable components: precision and identical reproduction to achieve interchangeability for life of FELCO tools, and • Durable components: robust and longlasting products, and the systematic use of quality materials.

Today, the professional market recognises FELCO as a true work and development

partner. With such trust comes responsibility.

FELCO is constantly innovating to further improve the quality of its products and customers’ experience.

FELCO’s robust range of tools caters for all commercial and domestic applications, and the latest product releases now include pruning shears, loppers, saws, hedge shears, powertools, grafting and pruning knives, steel cable cutters, accessories in sharpeners and lubrication product for complete servicing of all FELCO products.

In addition, FELCO also offers full product back up and support for its complete range of products, alongside its in-house service workshop for customers.

See FELCO’s full range of tools on site 117/118 at The Landscape Show this year.

Site # 117 / 118

We’ll be at

FELCO Swiss-quality commercial tools are for life, with a range of genuine replacement parts available and full back-up service available from our Australian based FELCO service department.

EXCLUSIVE SPECIALS

ON-SITE TRAINING

Discover limited-time, and exclusive show deals on tools and accessories at the Landscape Show.

Join our free training sessions and learn servicing and sharpening tips, tricks and techniques from our Swiss-trained technicians.

LATEST PRODUCTS

Be the first to experience our newest products!

PLUS, check out our full range of secateurs, loppers, power tools, snips, garden accessories and more.

Heiniger Australia is the exclusive FELCO distributor and authorised service centre.

(08) 9434 0000 | heiniger.com.au

www.landscapecontractor.com.au

77

Eye on the industry

Tuscan Path pebbles T

Add instant shape, texture, contrast and colour to outdoor spaces with Tuscan Path natural and decorative pebbles.

uscan Path pebbles are designed to be used in various landscaping projects to liven up all types of outdoor areas and are ideal for ground covering applications, offering permanent coverage for a one-time application.

Pebbles have become an increasingly popular option for beautifying outdoor spaces and offer versatility in design and aesthetic appeal with their low-maintenance requirements. Another benefit of using

Snow White Stone 20-25mm, 20kg

Black Decorative Pebble Mix 30-50mm, 20kg

78

LANDSCAPE CONTRACTOR

Natural Stone Mix 20-80mm, 15kg

pebbles in landscaping is their durability.

Unlike mulch or wood chips, which can break down over time and require regular replacement, pebbles are long-lasting and can withstand heavy foot traffic and harsh weather conditions.

Did you know, when used in a garden bed, pebbles can act as a weed suppressor?

From pathways to driveways, borders and garden beds, Tuscan Path pebbles will complete the look of your landscaping.

Enhance the visual interest in your garden by Black Polished Pebbles 30-50mm, 15kg

creating stylish and functional spaces and choose from a wide variety of colours, sizes and finishes there are on offer. Pebbles are available in a range of bag sizes including, 20kg, 15kg and 10kg.

Tuscan Path makes aspirational landscape style affordable, with designer landscape at warehouse prices. Sold exclusively at Bunnings. Head in store to Bunnings or visit bunnings com.au.

Visit the Tuscan Path website to calculate how much product you need and view product specific information.

Go to www.tuscanpath.com.au.

Instagram and Facebook: @tuscanpath www.landscapecontractor.com.au

79

Eye on the industry

A1 Rubber A major innovator in rubber surfacing.

A

1 Rubber is Australia’s largest recycled rubber manufacturer, upcycling over 9000 tonnes of rubber every year into finished products for various industries, including recreational surfacing, sports underlays, fitness flooring and equine. A1 Rubber has been manufacturing for over 30 years, with millions of square metres of products installed throughout Australia. A1 Rubber is proud to be Australian owned and operated, upcycling Australian end of life tyres into value added products.

Recognised

A1 Rubber is a major innovator in rubber surfacing, adjusting its manufacturing techniques and formulas to meet changing demands. This approach to innovation and improvement has placed A1 Rubber as the Australian market leader for manufacture and supply of premium coloured rubber surfacing materials, including CSBR and Rubber Mulch.

A1 Rubber aims to manufacture with as much Australian tyre rubber as possible. Over 50 million tyres are discarded annually in this country, and by manufacturing with this rubber A1 Rubber contributes to giving waste

Rubber wetpour surfaces offer excellent non-slip properties and a soft surface in the case of a trip or fall. tyre rubber a new sustainable life and prevent it from ending up in Australian landfill, saving up to 200,000 passenger tyres from landfill every month and turning them into a range of finished goods. In 2022 Tyre Stewardship Australia recognised A1 Rubber as a Circular Economy Collaborator for playing a role in utilising Australian-generated tyre-derived material, contributing to a sustainable society.

All colours are highly durable and long lasting under harsh Australian UV conditions.

Durable and colourful

CSBR and Rubber Mulch products are two of A1 Rubber’s most sustainable recreational options, made entirely of colour-coated recycled-tyre rubber. CSBR is available in a range of vibrant earthy colours. All colours are highly durable and long lasting under harsh Australian UV conditions, as well as heavy foot traffic.

CSBR, when used in conjunction with our premium binder, Procure, creates an excellent rubber wetpour surface with great drainage and soft underfoot feeling, suitable for use in play areas, outdoor pathways, patios, ramps, garden edging and more. Rubber wetpour surfaces provide an extra level of safety over traditional surfacing options, with excellent non-slip properties, and offering a soft surface in the case of a trip or fall. With a range of over 30 dynamic colour options, CSBR surface design creativity is endless.

The recommended binder, Procure, pairs perfectly with CSBR and is a premium binder capable of curing in any climate Australiawide, without cracking and with minimal yellowing.

Red Rubber Mulch is the perfect lowmaintenance solution for garden beds, locking in moisture and preventing weeds, without attracting termites like traditional chip bark.

Good for Australia

A1 Rubber is grateful for the ongoing support of those who choose its products over imported products. By choosing A1 Rubber you are supporting Australian manufacturing and contributing to a more sustainable society.

80

LANDSCAPE CONTRACTOR

LONG LIFESPAN UPCYCLED TYRES

MOISTURE LOCKING WEED PREVENTION

www.a1rubber.com (07) 3807 3666 - sales@a1rubber.com

Eye on the industry

Fulton Bricks & Paving Supplies

Vehicle access to the large yard is easy.

S

Established in 2010, Fulton Bricks & Paving Supplies, also known as ‘The Brickyard’, is a family owned business.

ince opening the doors many years ago, the team at Fulton Brickyard has gained a solid reputation for the quality of the landscaping products it supplies.

The team at The Brickyard is also able to provide innovative advice and solutions to both domestic and commercial customers throughout Melbourne’s metro area The Brickyard is located in Wantirna and proudly stocks a large range of products made by renowned Australian manufacturers like Adbri, Austral, PGH, Shapescaper and Aumond. The company also manufactures its own pier caps, pillars and letterboxes.

Over time

The staff at Fulton Brickyard believe that by having such an extensive range of bricks, pavers, natural stones, sealers, and edging solutions that they are able to help Melbourne homeowners and landscapers turn their landscape visions into a reality.

Along with supplying exceptional garden and landscaping supplies, the staff at Fulton Brickyard also offer personalised advice The brickyard manufactures its own pier caps, pillars and letterboxes.

82

and guidance backed up with their years of working in the industry.

Kerry, owner of the brickyard, shared that since starting the business he has seen an enormous amount of change in the styles and types of products people favour. More recently, Kerry has seen products like slipproof porcelain pavers and Crazy Natural stone paving become most popular. Just two years ago it was a lot of artificial grass in demand for people who wanted a low-maintenance yard, or for use in areas where natural turf simply wouldn’t grow.

Kerry also emphasised how the passion of Melbourne residents for their homes and outdoor spaces has remained strong.

Fulton Brickyard is excited to continue serving local customers, working with tradespeople, and supporting the community for years to come.

Why Choose Fulton Bricks & Paving Supplies?

Fulton Brickyard offers some of the best competitive prices, making The Brickyard a top supplier for brick, paving, retaining wall and pier caps in Melbourne.

The yard is open to the public six days a week, and the knowledgeable staff have many years of experience in the landscape and brick industry. Vehicle access to the large yard is easy, and staff are happy to provide a list of skilled tradespeople and landscapers to help you get your Job done.

The Brickyard also carries secondhand pressed reds and clay pavers,

Bluestone steppers are available in 20mm and 30mm, in small, medium and large.

and offers a reasonably sized clearance area to accommodate customers with varying budgets.

To learn more about Fulton Bricks & Paving Supplies’ superior and cost-effective products and landscaping solutions, give them a call on 03 9887 0134 or visit their website at fultonbrickyard.com.au.

• • • • • • • • •

Bricks and masonry blocks Pavers Retaining-wall blocks Retaining-wall steel and concrete sleepers Natural Stone pavers Australian-made synthetic turf Steel garden edging Clay pavers Pier caps, mailboxes and pillars

LANDSCAPE CONTRACTOR

Untitled-

Untitled-1 1

19/4/2022 12:10 pm

Eye on the industry

Xxxxx

Kaycee industries Landscape supplies all in one place.

C

ombining their extensive knowledge and experience, Karen and Matt Goodman identified a need for a more targeted approach towards the retainingwall and garden-edging market and made the decision to launch KayCee Industries to service those needs.

Partner business Dandenong Steel predominately deals with structural steel, merchant bar and sheet metal, cutting to whatever size is requested, while KayCee Industries deals with all the retaining-wall and garden-edging material. The result is an extensive range of products for an ever-growing landscaping market. Reliable, customer-focussed service, competitive pricing and a can-do attitude are central to Kaycee Industries’ thinking.

Does the company deliver?

We decided to ask someone who’d know.

pool with a pina colada. “We’ll build outdoor rooms, pools, decks, pergolas, paving, retaining walls…anything exterior of the house.”

Coolabah’s relationship with Kaycee Industries began five or six years ago when it built a pool for Kaycee’s owners, Karen and Matt. It was clear to Lewis that Kaycee’s business model was a good one which would work to his benefit.

“Karen at Kaycee just makes purchasing all landscape materials easy,” related Lewis.

“Rather than going to one place for sleepers, then a steel company for H channels, then going somewhere else for concrete posts for a deck and whatever, Kaycee Industries has it all there. The Coolabah guys all have Kaycee’s number and whenever they need anything, they’ll just call and Karen will organise it.”

The landscaping one-stop shop

Service

“Just call it ‘Coolabah’”, said a smiling Lewis Moran, co-owner of Coolabah Building and Landscape Construction in Victoria, and a very happy customer of Kaycee Industries.

Having started as an apprentice 15 years ago, Lewis worked his way up the ladder and eventually bought into the business with founder, Dave Jarman. Lewis is visibly very happy with the way things are going for Coolabah.

“We’re really custom solutions for all outdoor spaces,” he explained over the phone, denying he was floating around in a 84

LANDSCAPE CONTRACTOR

Convenience and efficiency are important to any business, but Kaycee adds a personal touch that makes the service a big step above some of its bigger rivals.

“I suppose it’s because we’re dealing with the owner,” said Lewis. “It’s like anything: people work a lot harder in their own business, and most of the time it’s Karen who answers the phone. When I ask, ‘Hey, I know I’ve left my order a bit late, but can we get it for tomorrow?’ Karen will usually say, ‘I think I can move something around and I can get that to you by 7.30. Does that work?’

“That’s so much better than big companies who say, ‘No. There’s two jobs booked ahead of you and you have to wait your turn.’

“Karen knows whether the other jobs she’s servicing are urgent or not. She doesn’t just follow a booking sheet. The service at Kaycee is great.”

Efficient

There it is.

For landscaping businesses in the Dandenong and Melbourne regions, Kaycee Industries can supply the materials needed for most jobs and have ready for collection at one location.

That has to be a huge time saver and a big efficiency boost on any day.

Give Kaycee a call on (03) 8899 7357 or, to find out more about the comp any, log on to kayceeindustries.com.au.

Kaycee Industries products • • • • • • • • •

Retaining-wall steel, Sleepers, concrete, timber Bagged concrete mix, rapid set Metal screens, (made to order) Garden edging, mild steel and/ or Corten Garden-edging connectors Star pickets Ag pipe Timber stakes and pegs

Eye on the industry

Professional indemnity insurance Essential facts.

P

rofessional indemnity insurance can provide cover for businesses and individuals who deliver professional services from the legal costs and claims for damages from an act, omission or breach of duty that occurs as a result of their actions.

This insurance may provide cover should: * An architect gets sued for creating a flawed house design after the owners had to pay to fix a flawed extension. * A marketing agency print a client’s brochure with incorrect contact details, resulting in legal action against the agency.

It’s important to understand how this type of cover works because many people don’t think it applies to them. But it can provide an important line of defence in many different circumstances.

1. Cover is available in many different industries

Don’t assume you can only take out professional indemnity insurance if you are a member of one of the traditional ‘professions’. You don’t have to be a doctor or a lawyer to take out this type of cover. Anyone who is in a role in which they provide advice should consider whether professional indemnity insurance could provide protection from litigation.

A lot of people like plumbers, treeloppers and builders give advice, but don’t buy professional indemnity insurance. But they may be exposed if a customer follows their advice to their detriment.

2. Professional indemnity insurance only provides cover when the policy is current

Professional indemnity insurance only covers policyholders while a policy is live. If you take out a policy, then let it lapse, you won’t be covered for claims that concern events that happened when the policy was active. This means professionals should consider whether they need to maintain professional indemnity cover even when they retire.

In some professions, for instance accounting, there is a requirement to maintain cover even when you retire or leave the profession.

3. Understand any exclusions

Professional indemnity insurance is a complex area, and many insurers won’t cover certain risks in policies. For instance, most insurers won’t cover builders and other entities in the construction sector for any damages that relate to building cladding. It’s essential to read the fine print in policies and develop a real understanding about which professional risks are covered and which are not.

Important Note This article provides information rather than financial product or other advice. The content of this article, including any information contained in it, has been prepared without taking into account your objectives, financial situation or needs. For more information or questions on Professional Indemnity Insurance or your own policy, please contact Fitzpatrick & Co. Insurance Brokers on 03 8544 1636 or email: insure@fitzpatrick.com. au OR visit the website at www.fitzpatrick.com.au. Fitzpatrick & Co has specialised in the horticulture and arboriculture industry for over 30 years.

Horticulture & Arboriculture Insurance Specialists

Industry provider and sponsors to industry leaders and Associations for over 20 years

Public liability insurance with additional benefits FINANCIAL LOSS UP TO

$500,000 Parties. e.g You are contracted to trim branches at a busy intersection. An unforeseen mechanical issue with a chainsaw takes longer to complete, increasing costs to the third party. This policy responds where there is no physical loss or damage to Third Parties but a Financial Loss only.

STATUTORY LIABILITY UP TO

$2,000,000 Covers OHS & Environmental Fines. by authorities this policy covers you.

To assist with cash flow, monthly payment plans are available

For more information contact: Rashmi Soni Horticulture Facility Manager Fitzpatrick & Co. Insurance Brokers

Direct 03 8544 1610 Phone 03 8544 1600 Email rashmis@fitzpatrick.com.au

fitzpatrick.com.au

631 Waverley Road Glen Waverley 3150 ABN: 25 050 242 914 | AFSL NO: 2344386 Fitzpatrick & Co. Insurance Brokers Pty Ltd

www.landscapecontractor.com.au

85

Eye on the industry

Renault Trafic Renault Trafic van is packed with work-ready features and ideally suited to hard-working landscaping businesses.

Trafic sets the standard for mediumsized commercial vehicles.

R

enault’s Trafic van has been a favourite of Australian businesses for many years, and a recent makeover sees the Trafic not only tougher, more powerful and more high-tech than ever before, it’s more comfortable as well.

“Trafic is an exciting upgrade that builds on the strengths Australians know Renault commercial vehicles for,” said Glen Sealey, General Manager, Renault Australia. “With additional safety and technology, comfort and convenience, we’ve made sure Trafic delivers hassle-free ownership and works hard for Australian small businesses.”

Driving this commercial is a quiet, smooth, stress-free experience.

All rounder

When a business needs to rely on its vehicles, it can rely on Trafic.

The Renault van is built and designed for 86

LANDSCAPE CONTRACTOR

The Renault Trafic van is built and designed for work.

work. Whether it’s taking advantage of the robust construction for hauling the tools and materials of a big job, towing a loaded work trailer or making the most of travel time using the modular mobile office in the cabin, Trafic sets the standard for medium-sized commercial vehicles.

It even looks good, making a great impression on potential clients and existing customers.

Tech

Running a robust, efficient, 2.0-litre dCi diesel paired with efficiency-enhancing six-speed manual or six-speed Efficient Dual Clutch (EDC) transmission, there’s 125kW of grunt on tap, and fuel consumption can be as low 6.5L/100km. An 80-litre fuel tank means less time at bowsers and more time on the job, and up to five capped-price services at intervals of 30,000km or 12 months means running costs can be fairly accurately forecast – and 30,000km service intervals means an absolute minimum of downtime.

As far as size goes, a choice of short (3098mm) or long (3498mm) wheelbase models with class-leading load length up to

More powerful, more high-tech and more comfortable than ever before.

4.15m, up to 1280kg payload and 2.5-tonne towing should have just about every trade covered.

Trafic is also available in Pro and Premium Van spec levels, and Pro and Lifestyle Crew Van choices. In total there’s a choice of eight versions, and a big list of options to customise your Trafic as desired.

Safety

Trafic is loaded with new safety tech. Things like adaptive cruise control, lane-departure warning and active emergency braking, sit reassuringly

alongside traffic-sign recognition and blindspot warning on the higher-grade models.

All examples of Trafic are part of Renault’s commercial van 5-year Easy Life Ownership, featuring a five-year/200,000km warranty, and up to five years roadside assistance when the owner completes each of the five 30,000km/12month capped-price services at a Renault dealer.

Renault Trafic starts from $49,000 before on-road costs.

For more information, visit renault.com.au.

www.landscapecontractor.com.au

87

Eye on the industry

A genuine women’s fit B

lundstone continues to lead the way in safety footwear with its RotoFlex® range.

This world-leading biomechanical design is a result of years of research into the needs of workers in trades, building and construction industries. The range includes two styles designed specifically to provide a genuine women’s fit – the wheat #8860 and stone #8863.

Challenge accepted

Empowered Women in Trades (EWIT) reports females represent 3% of the trade workforce. EWIT is one of many organisations working to support women to thrive in these industries and to encourage growth in representation. Furthermore, the New South Wales Department of Education reports in its Women in Trades Strategy for 2021 to 2024 women face several challenges when entering a trade. These barriers 88

LANDSCAPE CONTRACTOR

include cultural attitudes and perceptions about what roles are ‘suitable’ for women.

The team at Blundstone is constantly researching, developing and designing to ensure finding appropriate women’s specific safety footwear is not one of those challenges.

RotoFlex

The #8860 and #8863 from the RotoFlex range increases Blundstone’s women’s specific offering to seven styles — including boots suitable for a range of heavy and light industries.

“Blundstone is proud to be offering two more styles to increase our women’s offering in the safety market,” said Kylie White, Australian Sales Manager. “The #8860 and #8863 are specially designed to conform to a woman’s foot, providing all the latest protection and comfort features found

across our extensive unisex work and safety range.”

The RotoFlex #8860 and #8863 styles are an Australian first in providing composite safety in heavy-industrial women’s safety footwear. Along with the Fortalite® compression-resistant composite toe cap, there are three key technical features that work together to deliver RotoFlex’s premium comfort and safety: the GripTek® Heavy Duty TPU outsole, AirCell footbed, and SoftCell® overarching comfort system. Supporting the comfort technology, is Infinergy® E-TPU, a super-elastic energy foam from BASF that works to reduce impact and fatigue.

Componentry aside, the key technical features that differentiate the women’s specific RotoFlex styles are the last the boots are moulded on and the AirCell footbed that has been shaped and constructed with a softer PU to provide optimal support for a woman’s build.

The RotoFlex #8860 and #8863 styles are an Australian first in providing composite safety in heavy-industrial women’s safety footwear.

The AirCell footbed has been shaped and constructed with a softer PU to provide optimal support for a woman’s build.

Women’s specific design

Research indicates women’s feet aren’t in fact smaller versions of men’s, but rather, a different shape entirely with distinct functional contrasts, and thus, the need to offer women’s specific support. Blundstone’s design team has considered several variables for its women’s specific styles—arch heights, range of motion and everything in between to ensure a better performing safety boot fit for hardworking women.

Blundstone believes women should be entitled to all the same benefits afforded to men in the construction and trade industries.

In releasing the two RotoFlex women’s specific styles the brand demonstrates its commitment to the ever-growing female workforce.

The women’s specific RotoFlex are available at participating retailers now.

Put Blundstone’s innovation to work.

In releasing the two RotoFlex women’s specific styles, Blundstone demonstrates its commitment to the ever-growing female workforce.

www.landscapecontractor.com.au

89

Eye on the industry

Honda’s EU22 packs a punch!

The Honda EU22i Generator is packed with features so you’ll never be left in the dark. Stock is available to take home today.

T

here’s nothing quite like a Honda Generator.

Thanks to Honda’s unique Inverter technology, you are guaranteed smooth, uninterrupted electricity wherever you may be. Ideal for caravanning and camping, or out on the job site, Honda Generators provide clean, reliable electricity in the most extreme locations. Being built using light materials means they are easy and convenient to transport. You can use them anywhere, and the EU22i is no exception!

The standard in portable power

Honda’s EU22i is the world’s best-selling leisure generator and has set a new standard in portable power. Honda’s Inverter technology ensures stable, clean power in a Perfect for powering work, home or play.

90

LANDSCAPE CONTRACTOR

smaller, lightweight package. It is powerful and starts first time every time thanks to its one-pull easy-start system. The EU22i has been designed for the ultimate in quality, portability, and convenience.

in use. Coupled with a Honda four-stroke engine that eliminates the need to mix fuel and oil, you save both time and money with the benefit of reduced noise levels and much quieter operation.

Light and reliable

Available now

Raising the bar when it comes to quiet, dependable, durable and easy-to-use generators, the advanced four-stroke GXR120 engine guarantees reliable electricity, delivering 2200W maximum output.

Weighing in at just 21kg, you can take your lightweight EU22i with you anywhere.

Whether you’re going camping, you lose power at home, or need it on the work site.

Honda’s EU22i is environmentally friendly, offering low emissions and low fuel consumption for greater cost efficiency.

Delivering better than commercial quality electricity, this generator can run consistently on a full tank of fuel for eight* hours a day, so you can power your tools on the worksite, turn your camping into ‘glamping’ and not be left in the dark when the power goes out, wherever you are.

The built-in Eco Throttle results in high fuel efficiency, allowing the generator’s engine to automatically adjust the speed to produce only the power needed for the application

Honda’s EU22i is in stock and readily available for you to purchase from your local Honda dealer and take home today.

Honda is also excited to offer Click & Collect to customers via honda.com.au and participating stores in the Honda Dealer Network, offering an easy and secure checkout. Shopping this way allows customers to take advantage of PayPal Pay in 4 so you can buy now and pay later with no interest charged and no late fees.

Need more power output?

Honda’s EU30is is also readily available from your local Honda dealer or online via Click & Collect. With standard electric start, it is powered by Honda’s GX200 advanced fourstroke engine, offering a maximum power output of 3000 watts AC, and is perfect for a range of domestic and commercial applications. * With eco-throttle switched on ¼ output.

Eye on the industry

TPW Back-Ease hoist 600 An easy way to avoid 50% of workplace lifting injuries.

T

here are two facts of work life that are not in dispute: 1. 50% of work injuries are back related; and 2. The vast majority of these back injuries could be avoided with a materials handling device that takes the pain out of lifting.

An asset

The innovative, labour-saving TPW BackEase hoist 600 from Heiniger Australia is designed to lift up to 600kg and is an essential, injury preventing lifting option for all workplace material-handling solutions.

The unit is rapidly becoming an essential item for utilities, light trucks and service vehicles used in landscaping, green environ service and management, as well as the farming, mining and transport industries.

The unit has an extendable boom with

four extension and load settings from 200kg-600kg.

At full extension it is ideal for lifting those heavy and awkward plate compactors/ generators/concrete mixers and so forth on and off vehicle/truck trays on site.

In addition, at short extension, it can lift smaller pallets of cement/pavers to a max lift weight of 600kg.

position, the Back-Ease has many safety features, including a hose-break check valve which prevents the load falling should a hose burst, maximum lift pressure and a safety-standard approved hook. Complying with crane safety code standard AS 1418.1, it comes with a 12-month warranty and full SOP documents.

Worksafe grant

Safe and compact

Given the heightened awareness of workplace OH&S and workplace injury prevention related to lifting, the Back-Ease 600 is clearly a product any landscape and associated industry should consider. The Back-Ease 600 hoist is eligible for the NSW Worksafe grant of $1000 for small business injury prevention – nsw.gov.au/grants-andfunding/1000-safework-small-businessrebate.

The unit has an electric-operated hydraulic pump that can be powered by 12 volt or 24 volt, and a remote-control toggle switch gives the operator full control from outside the vehicle. With a manual slew of more than 200 degrees and a positive slew lock, the TWP Back-Ease has a total weight of just 78kg.

Designed to fold efficiently into transport

TPW Backease Hoist Industry professionals trust the reliable TPW Backease Hoist to safely lift loads of up to 600kg with extendable 1.2 - 1.8m boom. At only 78kg, it’s easy to install with no loss of load space and features hydraulic lift and pressure regulated downwards movement.

With a wide range of attachments available, the Backease Hoist is ready to lift pallets, posts, fencing, drums, sheep, gas cylinders & more!

ELI FOR $G1IBLE SAFEW 000 NSW GR ORK ANT *

Extension Boom SWL:

Length (m)

1.8

1.6

1.4

1.2

Lifting capacity (kg)

300

400

500

600

Lift above tray (mm)

2160

2010

1865

1720

See the Backease Hoist in action!

A VERSATILE, COMPACT & EASY-TO-USE INDUSTRY ESSENTIAL TO SAVE YOUR BACK. *The rebate gives up to $1,000 back to NSW small business owners who buy and install eligible safety items to address a safety problem in their workplace. You must have attended an eligible SafeWork NSW safety workshop, webinar, program, event, or had an advisory visit from a SafeWork NSW officer to qualify. Check elibility with your taxation advisor.

Scan the QR code to learn more.

Heiniger Australia | (08) 9434 0000 | heiniger.com.au

www.landscapecontractor.com.au

91

Eye on the industry

25 Junior Landcare ideas Check out these Junior Landcare ideas to try at home, at your school or with your Junior Landcare group.

E

very day, across Australia, Junior Landcarers are taking action to protect the world around them. Together with their teachers, classmates, parents, carers and community groups, there are lots of different ways children can get their hands dirty when it comes to caring for and connecting with their local environment.

Here’s a few great ideas you and your Junior Landcarer can enjoy.

1.

P lant an indigenous plant-use garden.

Grow native plants and bush tucker to discover new tastes and the many ways First Nations people have been using plants for thousands of years.

2. T urn trash into treasure.

Repurpose items from the recycling bin into an assortment of animal sculptures for your backyard, schoolyard or local community garden 3. C reate your own tyre beds.

Add visual impact to your garden and prevent waste going to the landfill by upcycling old tyres into sturdy garden beds.

4. M ake a water for wildlife station.

Providing water is a simple way to help local fauna – and you can do so using materials you already have at home.

5. B uild a vertical garden.

A great project to do at home or school – recycle plastic bottles and use them as

a space-saving way to grow herbs and other plants.

6. Create an ecosystems quilt.

Make your own quilt or use cardboard or a magnetic board to create a habitat backdrop for a fun and interactive way to explore ecosystems.

7.

ake paper seed shapes.

M Turn wastepaper or egg cartons into seed paper shapes – and help plants to attract pollinators at the same time.

8. Create an interactive bush-tucker trail.

Set up plaques with QR codes to provide students and community members as easy way to learn more about native plants and their uses.

12. Propagate plants from scraps.

Don’t toss out your leftover fruit and vegetable food scraps; use them to sprout or propagate plants for a fun and easy waste-management activity.

13. Make your own natural pesticide.

Cultivate happy, healthy plants using natural ingredients to get rid of unwanted pests such as aphids and scale.

14. Build a wiggling worm farm.

Set up your own worm farm to create your own rich fertiliser to help plants grow stronger and healthier.

9. B uild your own air bee’n’bee.

From placing hollow stems into recycled cans to constructing nests from hardwood boxes, there are lots of ways to build your very own bee hotel. ake artworks for tree guards.

10. M Create artworks to protect garden plants or for tree guards in your local setting, using coloured pencils, charcoal or paints made from clay or ochre.

11. Create a lizard lounge.

Build a safe space for lizards using materials such as rocks, soil and natural vegetation, and firsthand see the benefits of creating something from scratch.

There are lots of different ways children can connect with their local environment.

Plan a Junior Landcare friendly party.

92

LANDSCAPE CONTRACTOR

Go on a bug hunt.

15. C reate your own compost.

Reduce the amount of landfill that is produced and provide your soil with lots of good nutrients.

16. Make your own potato chips.

Turn a crop of potatoes into a plate of hot chips. It’s a rewarding activity to help kids grow, cook and market their own chips.

17. M osaic old library tubs.

Reuse old library tubs or bookshelves and turn them into garden beds that can be mosaicked with leftover tiles for even more upcycling fun.

18. Create a colour-wheel garden.

Assign children or classes with their own primary- or secondary-coloured flowers to plant, grow and attract a range of precious pollinators.

19. Keep a local-seasons journal.

Learn more about how First Nations people observe the seasons change and record your own seasonal observations.

20. Go on a bug hunt.

Slow down and put on your insect goggles to discover the different types of bugs – the engine room of life – living in your local environment.

21. Plant a harmony garden.

Introduce young learners to foods that may reflect our multicultural environment by creating a cultural or ‘harmony’ garden.

22. Make a newspaper seed starter pot.

Plant a seed and watch it grow into a seedling, and then into a tasty treat ready for harvesting.

23. Make your own wicking bed.

Wicking beds are not only a great way to repurpose materials, they help plants grow in a sustainable and water-wise way, as well.

24. Build you own nest box.

Nest boxes are an ideal way to help recreate habitat for our native birds, marsupials and microbats looking for a safe space to call home.

25. Plan a Junior Landcare friendly party.

There are so many different ways to have fun and enjoy an event while also caring for the land, water, flora and fauna.

Do you have a Junior Landcarer activity you’d like to share? Submit your idea to enquiries@landcareaustralia.com.au for your chance to win a Woolworths gift card, and you can see more about these ideas at juniorlandcare.org.au www.landscapecontractor.com.au

93

Association news

Arborgreen partners with LVML to present The Landscape Show 2023 Wednesday May 24, 2023, Sandown Racecourse, 8.00am-3.00pm.

A

rborgreen, Australia’s most resourceful provider of landscaping and horticultural products and expertise, is proud to announce its sponsorship of The Landscape Show hosted by Landscaping Victoria Master Landscapers.

Taking place on May 24th, 2023, at Ladbrokes Park (Sandown Racecourse), The Landscape Show is the premier trade event for the landscape industry.

For over 35 years, Arborgreen have been the foremost experts in landscaping, tree-planting, horticulture, revegetation and erosion-control products and solutions.

Known for its commitment to getting the best project outcomes, Arborgreen credits its success to adaptability, innovation, and partnership.

“We believe we’re better when we work together,” said Marc Jarvis, Arborgreen’s Head of Marketing. “Whether we’re sharing knowledge, figuring out new ways to solve challenges, or inventing new products, this belief is the core of our business. We couldn’t think of a better place for the industry coming together and exchanging ideas than The Landscape Show. A partnership just makes sense.”

With its recent merger with SureGro TreeMax, Arborgreen is now placed to deliver its unique combination of smarts, service, and speed on a national scale. The Landscape Show is the public debut of the new Arborgreen brand since the merger in January 2023, alongside the wide range of exhibitors showcasing the latest and greatest trends, technology, and knowledge in the landscaping industry.

“We are excited to have Arborgreen on board as the Naming Rights Partner for The Landscape Show,” said Megan Flower, CEO of Landscaping Victoria Master Landscapers.

“The company has a long legacy of providing high-quality products and expertise to the landscaping industry. It truly embodies the spirit of innovation and partnership that we strive for at The Landscape Show, and we are thrilled to be working with Aborgreen to make the show as good as it can be.”

94

LANDSCAPE CONTRACTOR

The leading landscaping suppliers are in one place, allowing visitors a chance to see all that is available and what would suit their needs the most.

Supporters of The Landscape Show

Big brands are lining up again to support the show. According to James Coyne, Brand Manager at Milwaukee® Tools, The Landscape Show is a great networking opportunity for professionals and business owners alike. “As a returning Major Sponsor, Milwaukee® Tools is thrilled to engage with outdoor professionals, hear about their jobsite experiences, and have genuine conversations about their trade,” Mr Coyne said.

“The event showcases the latest industry trends and gives you access to expert knowledge and the newest product innovation for landscaping — all in one location. We are happy to be supporting an event that unites so many commercial and residential professionals in Victoria,” Mr Coyne concluded.

A new Major Sponsor for 2023 is Coolabah Turf. Stacey Fraser, Communications & Marketing Coordinator said, “Our team is excited to engage with the wide variety of professionals who are always keen to know more about instant turf, one of the most affordable instant landscaping solutions. Changing lives by encouraging people to connect with nature, family and friends and the great outdoors is a message we just love to share.”

Exhibiting, as well as taking on a Supporting Partner role, is Repurpose It, a producer of premium quality repurposed materials offering a wide range of construction and landscaping products, including soil, mulches, and barks.

Repurpose It wants to show the industry it can make sustainable landscaping choices that will benefit their clients and the environment.

According to George Hatzimanolis, Repurpose It founder and CEO, it is critical for the Australian landscaping industry to amplify its sustainable presence in the products it uses.

“We are passionate in developing a closed-loop economy. As a community, we can work together to reduce our reliance on taking virgin resources from the earth, especially where recycled options are

available. Our products enable the industry to create beautiful gardens that are sustainable,” George said.

Limited opportunities remain

The Landscape Show is an ideal environment for industry professionals to connect with the landscaping community and the perfect opportunity for the industry to come together and share knowledge and ideas. All of the leading landscaping suppliers are in one place, allowing visitors a chance to see all that is available and what would suit their needs the most.

Limited opportunities remain to exhibit or partner with The Landscape Show in 2023. This chance to connect directly with your target market and promote your brand to attendees from all areas of design, construction and maintenance in the landscape industry is unparalleled.

Don’t miss out on the opportunity for your brand to be SEEN, with maximum targeted exposure allowing you to create and build new business relationships, as well as to catch up with your current customer base.

The prospectus is available online at thelandscapeshow.com.au, or contact admin@thelandscapeshow.com.au to find out more.

Register to attend today

It is FREE to attend The Landscape Show and, as well as being able to visit Arborgreen, Milwaukee and Repurpose It along with over 70 other exhibitors, every attendee also receives a showbag full of goodies, including a complimentary copy of Landscape Contractor Magazine!.

From those starting their career to seasoned professionals, there’s something for everyone. www.landscapecontractor.com.au

95

Association news

2023 Landscape Excellence Awards Entries for the prestigious awards are now open.

H

ighly prized by landscapers throughout NSW and the ACT, the TLA Landscape Excellence Awards recognise individuals and businesses across different categories that reflect the modern landscaping industry.

The awards represent the very highest of achievement in workmanship, innovation, and creativity in the industry. They’re open to all members of the association, with entrants and winners encouraged to leverage their involvement and gain brand recognition and exposure for their businesses.

Chair of Judges, TLA Director and former educator, Judy Bates, said she is inspired by the quality of the work submitted each year for the awards. Bates has been involved as a judge since 2010 and says she is always amazed by the entries, which encompass all areas of the landscape business, including

maintenance, design and construction of residential and commercial projects.

“It reaffirms my faith in the industry – we have an amazing group of people who do some incredible work,” she added. “The entries are of a really high quality and showcase the sort of work that our industry does, and I am proud of being part of it.”

She also paid tribute to the professionalism of her fellow judges.

“They are giving their time freely and are so enthusiastic and professional about the process,” she said.

Supporters

Long-term sponsor Glazed Co, has stepped up its involvement to take on Platinum Sponsorship, supported by Gold Sponsors, Andreasens Green, Ideal Edging and Alpine

Nurseries. The association is keen to speak with any additional suppliers who are interested in sponsorship opportunities for the prestigious night.

Glazed Co. has been a TLA member since 2021. Director Daniel Chamoun says he believes being a member associates the company with like-minded business owners who value quality in product and customer service.

“We are proud to be the Platinum sponsor of the Landscape Excellence Awards this year as it gives us the opportunity to meet many of the members in a relaxed setting,” said Chamoun.

“We value this opportunity to learn about the issues facing landscaping businesses and how they are addressing them. As a supplier, it also allows us to listen to landscapers and see if there’s anything we can implement in our own business that will help streamline processes for our clients.”

Categories

The award categories are formulated and adjusted each year to reflect the feedback the TLA Team receives from members, judges, members of The Board and past entries.

This year’s categories include: • Apprentice of the Year • Residential Construction • Residential Design • Commercial and Civil Construction • Residential Maintenance • Commercial Maintenance • Supplier of the Year across multiple categories.

2022’s Supplier of the Year, Artisan Interiors.

96

LANDSCAPE CONTRACTOR

For further information, corporate sponsorship enquiries, or to submit online entries, visit landscapeassociation.com.au

Photography by orlandosydney.com

The awards night makes a glamorous close to the year.

About the Landscape Association The Landscape Association (TLA) is the peak industry body for landscaping in NSW and the ACT. TLA members enjoy a wide range of events, resources, information, services, and advice to assist landscapers to run their business and stay ahead of industry trends.

Multiple award winner in 2022, Green Options picked up Gold and Best in Category in the Commercial Maintenance Resorts/ Retirement Communities/Educational Campuses category with this work at Pymble.

“The excellence awards have helped us become highly recognisable to both potential clients and our peers in the industry.

It was a huge boost in morale within our team to be recognised for all their hard work and dedication.”

– Nathan Lindgreen, Dreamscapes Landscaping Services, TLA Member

GJ’s Landscapes Pty Ltd scored Landscaper of The Year in the Commercial and Civil Construction category for the central courtyard precinct at Macquarie University.

“This industry recognition from the Landscape Excellence Awards has created a great opportunity not only to showcase our work to our peers, but to be offered a number of media opportunities to connect to a much wider audience.”

Apprentice of the Year Landscape Construction, Campbell Wood.

– Jack Hayes, Fifth Season Landscapes, TLA Member www.landscapecontractor.com.au

97

Association news

Design Of The Year + Landscaper Of The Year winner: Tim Davies Landscaping. Project: Peppermint Grove Residence.

LIAWA awards

C

M

Y

CM

Tim Davies Landscaping has claimed the top prize in the 2023 Landscape Industries Association of Western Australia (LIAWA) Awards of Excellence.

G

avin Baxter from Tim Davies Landscaping collected the 18-carat gold-plated full-size shovel as the trophy for winning four individual categories and overall Landscaper Of The Year at a gala presentation at the Skyview Lounge, Optus Stadium.

Pierre Yang, representing Simone McGurk, Minister for Youth, Training and Water, presented the Waterwise Garden Award to Tim Davies Landscaping (TDL) and Awards major sponsor Robbie Gough, Area Manager of Hunter Industries, presented the winners’ Golden Trophy.

More than 60 nominations were received in the 2023 LIAWA Awards’ 17 categories covering residential, commercial, its people, students, cultural significance, design, As a not-for-profit organisation, LIAWA would not be able to hold such prestigious awards without the support of generous industry sponsors. We are proud to announce Hunter Industries as the major sponsor of the event, supported by Water Corporation, Benara & Domus Nurseries and Cambridge Insurance.

98

LANDSCAPE CONTRACTOR

outdoor living and parks and gardens, support industries, plus design and construction in entertainment precincts, offices and shopping centres.

In a showcase of WA’s most amazing landscaping and gardening projects, the LIAWA Awards recognise outstanding achievements and the high standards

shown by the professionals in our unique landscaping environment.

The biennial awards recognise local designers, builders, suppliers and maintenance professionals who display outstanding skill and expertise in the development and execution of beautiful and functional outdoor spaces.

2023 Winners include: Waterwise Garden of the Year: Tim Davies Landscapes: Cottesloe Garden Renovation of the Year: The Greenscape Collective – Regents Garden Design of the Year: Tim Davies Landscapes: Peppermint Grove Outdoor Living Space: Tim Davies Landscapes: Peppermint Grove Residential 2022 – The future of Landscapes: Tim Davies Landscapes: Peppermint Grove Project Display Garden of the Year: Instant Gardens: VM Building Display Home Recreational Feature: Landscape Elements: Collier Park Mini Golf Student of the Year: Aidan Williams –

Deep Green nominated Employee of the Year: Josh Demczuk – LD Total nominated Innovative Green Infrastructure: Deep Green Landscaping: Verdant Apartments Cultural Significance: Deep Green Landscaping – Curtin University Indigenous Learning Circle Design and Construct of the Year: Kardan Australia – Senses and Therapy Garden Parks and Open Space: Deep Green Landscaping: Curtin Exchange Business Ingenuity: Perth Materials Blowing Supportive Supplier: Perth Materials Blowing – Slinger Truck

MY

CY

CMY

K

“T p

g

Landscape Contractor Full Page Ad Mar23.pdf 14 28/03/2023 8:31:36 AM

WEDNESDAY 24 MAY 2023 LADBROKES PARK (SANDOWN RACECOURSE)

C

1800+ visitors

Over 100 exhibitors

Live seminars & presentations

M

Y

CM

Giveaways & offers

Networking opportunities

MY

CY

CMY

Meeting with peers, suppliers and customers is a vital part of developing any business, and The Landscape Show 2023 will again offer a day of unrivalled networking and inspiration to all landscape professionals. Being able to access the latest products, innovations and advice in the one place is a huge advantage for industry professionals.

K

Can you afford to miss it?

“The one-day format concentrates the best parts of any trade show meaning it is good value for money, good use of time and good return with meeting a high amount of the right people during that event”.

Simon Higgins, Exhibitor, Urban +

Proudly brought to you by

Whether we’re sharing knowledge, figuring out new ways to solve challenges, or inventing new products, this belief is the core of our business. We couldn’t think of a better place for the industry coming together and exchanging ideas than The Landscape Show.

Marc Jarvis, Head of Marketing, Arborgreen Naming Rights Partner

Naming Rights Sponsor

Major Sponsors

“This was a fantastic opportunity to discover new services and products on the market for our industry. The format was great, and it was great putting faces to names”.

Natasha Dixon, Attendee, Candix Landscapes

Supporting Sponsor

It is FREE to attend The Landscape Show, and every attendee receives a showbag full of goodies including a complimentary copy of Landscape Contractor Magazine!

A GENUINE WOMEN’S FIT The RotoFlex range by Blundstone includes two women’s specific styles, the #8860 and #8863.

These safety boots offer lightweight protection designed for hardworking women.

PUT OUR INNOVATION TO WORK

AVAILABLE AT PARTICIPATING RETAILERS NOW

BLUNDSTONE.COM.AU/ROTOFLEX @blundstoneworkau

BLDAU_Lscape_Contract_May/June_23_FP_FA.indd 1

15/3/2023 2:15 pm