Farms & Farm Machinery issue 398

EOFY Buyers Guide 12 PAGE SPECIAL FEATURE Issue 398 > $7.95 > On sale 20/05/21

Tractors, farm machinery & materials handling equipment for sale TESTED

Into the Groove John Deere 750A Seeder

The Right Moves

Claas Disco Mower

Greatest Answer

Joskin Trans-Cap 5500

BUMPER

132

UEE PAGE ISSU

RAIN OR

shine

,!3BD0A6-aaejdg!:K;q

The first of its Fifth Generation of tractors, the Valtra G Series has a powerful engine, a versatile transmission and a cab that sets new benchmarks for comfort and visibility >> Page 14

$154,000 2016 Case Magnum 240 CVT Tractor. MFWD Cab w/susp, 50km/h IVT trans • 08 6555 3500

$385,000 2014 Claas Lexion 760. 635mm Terra Trac on 3m centres, Cat C13 eng • QLD 07 3171 1142

$50,600 2021 Unia Ares 3-5.. Multidisc trailing tiller, drawbar unit 3.5m width • NSW 02 9119 0301

$35,995 Polaris RZR XP Turbo EPS. 925cc 168HP turbocharged, twin cylinder • 03 9116 6686

INSIDE: 80+ pages of new & used farm machinery for sale + more at TradeFarmMachinery.com.au

FFM 398 front cover.indd 1

5/05/2021 2:36:07 PM

MAXIMISING EFFICIENCY - GROWING PROFITABILITY

FRONT MOWERS

• 3.2m working width • Flexible headstock • Excellent ground adaption • Fully welded cutterbar with round discs • Non-stop BreakBack

MOWERS

• 2.4m to 9.5m working widths • Rear mount and centre suspension models • Fully welded Cutterbar with round discs • NonStop BreakBack • 540/1000 RPM Gearbox

TEDDERS • 5.2m to 14m working widths • Mounted and Carrier frame models • Low weight and Power requirements • ProLine and CompactLine gearbox models • Super-C tines with large spring coil diameter

ROTARY RAKES

• 3.5m to 15m working widths • Single, Twin and Quad Rotor options • Proline and CompactLine gearbox models • TerraLink Quattro ground contouring system • ISOBUS option available on PRO quad rotor models

FOR MORE INFO VISIT US AT WWW.KVERNELAND.COM.AU AD-591996311.als - Base Edition 2

5/5/21 8:23 am

Y

TRAILING MOWER CONDITIONERS

FULL WIDTH STEEL ROLLERS OR SEMISWING STEEL TINES

AVAILABLE IN 3.2M, 3.6M AND 4M MODELS

dels s

MOUNTED MOWER CONDITIONERS

CHEVRON ROLLERS OR SEMI SWING STEEL TINES

AVAILABLE IN 3.2M, 3.6M AND 3.6M VARIO

PLOUGHS

• 3 - 12 furrows reversible • In furrow and on land models • Isobus option available • Mechanical individual auto reset • Multiple configurations - Steel or plastic boards - Skimmers - Disc coulters

ls

OR PHONE 1800 424 241 AD-591996311.als - Base Edition 3

FFM-DPS-5211750-CS-398

5/5/21 9:00 am

CONTENTS

New business advertising Email newsales@aremedia.com.au or call the state representative below

Private advertising ADVERTISE tradefarmmachinery.com.au/sell EMAIL privateads@aremedia.com.au PHONE 1300 362 272

Advertiser services 1300 362 355

Editorial EDITOR Andrew Hobbs andrew.hobbs@aremedia.com.au JOURNALISTS Lincoln Bertelli, Anthony Wingard CONTRIBUTORS Jaiden Drought, Mark Fouhy, Harrison Hunkin, Chris McCullough, Willie McKnight, Dan Reymer, Trevor Whittington ART DIRECTOR Daz Woolley PRODUCTION CO-ORDINATOR Cat Fitzpatrick EDITORIAL AND NEWS: 73 Atherton Rd, Oakleigh, VIC, 3166 Tel: 0429 530171 Email: andrew.hobbs@aremedia.com.au

Digital PRODUCER Michael Cahill

Marketing & distribution CIRCULATION MANAGER Stuart Jones

Advertising INDUSTRY SALES MANAGER Adrian Christian 0423 761 784 adrian.christian@aremedia.com.au GROUP SALES MANAGER Carl Rakusin 0409 838 984 carl.rakusin@aremedia.com.au QLD Emily Schultz 0466 317 555 emily.schultz@aremedia.com.au SA/WA Nick Lenthall 0439 485 835 nick.lenthall@aremedia.com.au VIC/TAS Matt Carey 0438 359 109 matt.carey@aremedia.com.au NSW Ben Coleman 0466 545 664 ben.coleman@aremedia.com.au

Finance SENIOR ACCOUNTANT Andrew Hughes

Executive Group GM – INDUSTRY Graham Gardiner AUTOMOTIVE CEO Andrew Beecher COMMERCIAL CONTENT DIRECTOR Matt Rice OPERATIONS MANAGER Regina Fellner DIGITAL DIRECTOR Tim Kenington FINANCE MANAGER Cain Murphy PEOPLE & CULTURE MANAGER Nicola Ramsay

Subscriptions Tel: 136 116 Fax: 02 9267 4363 Web: magshop.com.au Farms & Farm Machinery Subscription Reply Paid 4967, Sydney, NSW, 2001

For advertising terms & conditions: www.industry.aremedia.com.au ISSN 1449-6399

14 News 06 07 08 10 12 14 16 18 19 20 22 28 30

Honda launches Pioneer 520 side-by-side Segway releases additional ATV safety features Landini reveals new Discovery 60 tractor Carbon Robots releases laser-guided weeder Kubota releases the R540 compact wheel loader Cover Story: Valtra G Series Agco and CNH Industrial flag sales boost Agriculture eyes potential of space technology New Holland gains two medals at SIMA 2021 Victorian scientists develop apple-picking robot Rabobank predicts variety of challenges for beef Event News: Seymour Expo highlights Event News: The best of Diesel Dirt & Turf

Sponsored Content 24 Built Strong

Hercules wheel loaders for all-round ag work

JCB announces upgrades to Fastrac 8330 tractor

Munro Engineers’ range of fencing products

Vanderfield lends a hand with equipment deals

A look at the Taege range of air seeders

36

48 Productivity Boost 50 Fencing Focus

52 Always With You 54 Unique Design

Features 36 Next Generation

Wide Open Agriculture brings fresh approach

1925 Benz Sendling goes up for sale

The rise and fall of Bundaberg’s Toft Bros

38 Bucketload of Benz 40 Sweet Legacy

EOFY

60

44 A New Deal

New challenges for agriculture in 2021-22

The value of Australian farmland surged in 2020

45 Green Acres

Reviews 56 Superseeding Expectations

Four-metre John Deere 750A seed drill

Claas Disco mowers

Joskin Trans-Cap dumper silage trailer

60 All the Right Moves

64 Bigger Isn’t Always Better

Regulars 26 Events calendar 32 Market analysis 34 WAFarmers column 107 Plant & Equipment

Farms & Farm Machinery is published by Are Media Pty Limited. ABN 18 053 273 546, 54-58 Park Street, Sydney, NSW, 2000. All material in Farms & Farm Machinery is protected by the Commonwealth Copyright Act, 1968. No material may be reproduced in part or in whole without written consent from the copyright holder. Distributed

by Ovato Distribution. Printed by IVE Print. Cover price is recommended maximum retail price.

4 TradeFarmMachinery.com.au

FFM2106_398 Editorial.indd 4

Cranes, compressors and more

64

128 Private advertising

List your item for sale + rates, deadlines and coupon

130 Index

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 5:20:55 PM

NO O MATTER WHICH BOBCAT COMPACT TRACTOR YOU CHOOSE, IT’S WELL EQUIPPED TO KEEP UP WITH YOUR TO-DO LIST.

| | | | |

25hp 35hp 38hp 45hp 55hp

AD-591996311.als - Base Edition 5

www.bobcatofaustralia.com.au

Bobcat Australia

clark@clarkequipment.com

bobcatofaustralia

1300 736 848

Bobcat Australia

FFMM-FP-50311 P-5031142-C 42-CS-398

CT1025 5 CT2035 0 CT2040 5 CT4045 5 CT4055

5/5/21 9:57 am

PRODUCT NEWS

Left: Honda says that its new Pioneer 520 “punches well above its size and weight”

may debut The Pioneer 520 side-byside is Honda’s new pitch to Australian farmers

H

onda’s latest addition to its side-by-side range is due to be released in Australia this month.

The Pioneer 520 was announced late last year as an improvement on the Pioneer 500, which is currently the smallest model in the Japanese manufacturer’s range.

At the time, Honda only said it would be released in the second

quarter of 2021 but has since confirmed it would be headed to Australia in May. Its release is particularly relevant as Honda has identified sideby-sides as its new target for Australian farmers, following the company’s decision to abandon quad bikes due to the federal government’s rollover protection laws.

Honda describes the Pioneer 520 as a side-by-side “that punches well above its size and weight”.

It is compact, having the same 127cm width as the Pioneer 500, however its 518cc engine is 43cc larger than its predecessor.

Honda says the engine is the same used in its TRX250 series, but tuned for a side-by-side application and with a wider bore, which it says helps offer an increased low-to-midrange power and torque.

The Pioneer 520 has a five-speed transmission with automatic and manual modes, and two and four wheel drive is selectable on-the-fly via an easy-to-reach dash-mounted knob.

Other new features of the Pioneer 520 include a strut-assist tilt tray plus improved shock damping and front and rear suspension.

It also has a 453kg towing capacity.

“Whether customers are looking for an entry-level side-by-side, moving from an ATV, or just seeking a vehicle that can work hard without taking up a lot of room, the Pioneer 520 should be at the top of their list,” Honda MPE Australia general manager of motorcycles Tony Hinton said when the model was first announced last year.

d

Left: Honda has confirmed that it will no longer be selling quad bikes in Australia, such as the TRX520 shown here

f

n

Honda has officially joined Polaris and Yamaha in quitting the Australian ATV market as other contenders seek to enter

6 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 6

H

onda has confirmed it will exit the Australian quad bike market once new safety laws come into effect in October.

The changes, which will require all new quad bikes sold in Australia to be fitted with rollover protection, were announced by the federal government in 2019 and officially come into force on October 11 this year.

Honda had already flagged it would stop selling quad bikes, but the decision has now been confirmed by the company’s Australian director of motorcycle and power equipment Peter Singleton.

“Safety standards must be evidence-based, in both criteria and testing methods, to internationally accepted standards,” Singleton says.

“Honda has provided research to show the negative outcomes of the government’s proposal but unfortunately it was rejected, and we are here in this position today.”

Singleton says the company supported other safety measures such as mandating the use of helmets and restricting riders aged under 16 from driving adult-sized quad bikes.

He also says the company was moving towards side-by-side vehicles to replace quad bikes for farmers.

“We understand that many farmers require a versatile vehicle to support their work and we believe our side-by-side range can serve this requirement,” he says.

Two other major manufacturers – Polaris and Yamaha – have also previously announced they will stop selling their quad bikes in Australia because of the new laws.

Other manufacturers have seen an opportunity to enter the Australian market.

Segway – best known for its two-wheel personal transportation devices - and Taiwanese manufacturer TGB are both introducing their quad bikes, which are fitted with the new rollover protection, to the country.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:49:56 PM

FFM-HH-5030590-CS-398

hitting the road

PRODUCT NEWS

streets ahead Segway Powersport’s foray into the Australian all-terrain vehicle (ATV) market has been strengthened through additional safety features across its 2021 range

B

oth of Segway’s AT6-S and AT6-L S models will include additional safety measures and technologies in order to meet and exceed the Australian government standards for ATVs in the country.

Among the new additions to all of Segway’s Powersports models in Australia is the Telematics Box (T-Box) – a connection terminal that delivers a number of online applications for the operator. Among its functions is increased mobile phone integration, SOS alerts, vehicle remote monitoring and Bluetooth.

The T-Box allows for operators to add an emergency contact person who will automatically receive an SMS with the precise location of the vehicle and operator in the event of a serious roll or collision.

Real-time data can also be accessed through Segway’s Smart Commanding System (SCS), which provides industry-leading interaction and safety to best operate the ATVs. The addition of the T-Box, along with other required safety measures, follows extensive efforts to improve safety on quad bikes in line with new regulations that will be enacted in midOctober this year.

The Consumer Goods (Quad Bikes) Safety Standard 2019 law will make it mandatory for all ATVs to be fitted with rollover protection, given the risks associated with rolling quad bikes and crushing riders underneath the vehicle.

The new safety standards were agreed upon by both the federal government and the Australian Competition and Consumer Commission (ACCC) following nine quad bike related deaths in the first half of the 2020 calendar year alone.

However, disapproval from a number of ATV manufacturers has meant many have, or will, pull out of the Australian market. Honda, Polaris and Yamaha have all confirmed they will withdraw from ATV sales when the regulations go into effect on October 11 this year.

Segway, however, will instead look to maximise its footprint in the Australian ATV market with all 2021 models already featuring the necessary anti-roll protection, as well as the T-Box, which can be accessed via an app on Apple and Android devices.

T-Box technology is available across all Segway Powersports vehicles including their ‘Snarler’ ATV brands throughout Australia via Urban Moto Imports, the official distributor of Segway Powersports in Australia.

Above left: With many manufacturers pulling out of the Australian ATV market, Seyway is looking to take advantage of this with new models Above right: Segway’s ATVs already feature the necessary anti-roll protection that will be required by law from October this year

discover great value from

$43,990

discovery 60 &75

no deposit finance *INCLUDES 4-IN-1 BUCKET FREE CANOPY

2 SETS HYDRAULIC REMOTES

OFFER ENDS 30TH JUNE 2021 While stock lasts

12 SPEED SHUTTLE LARGE 18.4 X 30 TYRES*

FFM-HH-5030590-CS-398

HEAVY DUTY 3,150KG

The Landini Discovery will deliver impressive performance and torque. It is a simple and easy to use mechanical tractor. This tractor is unmatched in $ per HP and great value for money. For a limited time, order a Discovery with Loader and 4-in-1 bucket, 3rd function and Euro hitch. Two year warranty.

Dealer delivery charges apply. Ask us about Inlon Finance. # Subject to eligibility. * Discovery 75 only.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM2106_398 Editorial.indd 7

For more information and your nearest dealer

1800 849 090

www.landini.ag/714 TradeFarmMachinery.com.au 7

6/05/2021 5:22:30 PM

PRODUCT NEWS

find out Landini’s Discovery 60 tractor is built for strength, despite its small size Above: The Discovery 60 from Landini is a smaller version of last year’s Discovery 75

L

andini has released a new tractor – the Discovery 60 – which is a smaller version of the Discovery 75 released by the Italian manufacturer last year but with many of the same specifications.

The Discovery 60 4WD ROPS (rollover protection system) has been designed as a strong, value-for-money tractor when the 75 horsepower (56kW) of its stablemate is not required.

With a 3.7 litre, four-cylinder diesel engine, the 60hp (45kW) model has a base weight of 3,150kg and a hydraulic three-point linkage lift capacity of 2,500kg, with a total hydraulic capacity of 67 litres/minute.

The base weight, linkage lift capacity, tractor length (4.16m)

and engine capacity (3707cc) are all the same on both the Discovery 60 and 75.

Two sets of hydraulic remote outlets are standard on the Discovery 60, as is a sun canopy on the two-post folding ROPS above the spacious driver’s area.

The Discovery 60 is fitted with a 12-speed transmission, a 78-litre fuel tank and PowerArm level-lift loader.

Soil preparation, mowing, baling, loading and transport are among the intended uses for the medium-sized and powered Discovery 60, which the manufacturer says still offers the strength of the Discovery 75 despite its reduced horsepower.

Left: The Solis N90 tractor has been designed for orchard and vineyard farming

new dawn Solis Tractors has a new Australian distributor, with about 26 models now in stock

8 TradeFarmMachinery.com.au

FFM2106_398 Editorial.indd 8

T

oowoomba-based Equipment Specialists is the new Australian distributor of Solis Tractors, with new models available now.

The tractors, produced by Indian manufacturer Sonalika Tractors, will be sold alongside Equipment Specialists’ ranges of Alfa tractors and Lovol earthmoving machinery.

The distribution handover had been in the works for the past nine months, but the process was slightly delayed because of the COVID-19 pandemic, only being finalised this year.

Equipment Specialists operations manager, Lawrence Perkins, says the Solis machines have already proved popular as it builds up its inventory.

“We have already sold a few already and we’ve got more ordered to come,” says Perkins.

“We’re ready to sell units now. It’s been a nine month process

to sort everything out because of the virus but it’s been formally sorted for three months or so and we’re ready to go.”

The first of the Solis fleet arrived in late April with more units to arrive over the coming weeks in time for FarmFest in Toowoomba on June 8-10.

In all, Equipment Specialists will have 26 different models of Solis’ 2021 tractor range available, including models from their S-Series, N-Series and H-Series, when factoring in different attachments and designs.

Among the inventory is the N90, a 90-horsepower (67kW)heavy lift capacity tractor built to ensure easy operation with enhanced functionality. A spacious machine, the N90 has been given a small facelift this year with a new, narrow façade making the machine more stylish and appealing.

The N90 includes power steering and is ideal for vineyard and orchard farming, says Equipment Specialists. It also boasts a 2,500kg hydraulic lifting capacity with the overall tractor driven by a 12F+12R transmission.

Also among the inventory at Equipment Specialists are a plethora of S-Series tractors, including the S50, S60, S75, S90 and S110 models.

Solis says the S-Series models are an ideal combination of power and efficiency, with the compact farm tractors built to be durable and equipped with a range of implements to execute agricultural and maintenance tasks with increased versatility.

The H-26, a tractor powered by a three cylinder, 26hp (19kW) Mitsubishi engine will also be available.

A multifunction tractor, the H-26 is equipped with hydro-static transmission, advanced tech features and a high lifting capacity.

It also includes Solis’ new HST tractorshift technology which enables the operator to perform efficiently across varying terrains between different speeds while still retaining maximum comfort for the operator. Currently the Solis H-26 is the only tractor in its range with tractorshift.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 5:20:49 PM

GAIN POWER GAIN INSIGHT GAIN TIME

GET THE LEADING EDGE WITH THE NEW 9 SERIES TRACTORS

FFM-FP-5189090-CS-398

To help you stay ahead in productivity and profitability, we’ve added a whole lot to the new 9 Series Tractors. Like more horsepower (ranging from 390 to 640) to efficiently tackle any job, more integrated Precision Ag technology to help you harness the value of your data and more lighting and cab configurations to enable you to operate around the clock with ease. With three machine forms to choose from, find the right match for your unique operation. Get the gains that only the new 9 Series Tractors offer.

Visit our virtual showroom at JohnDeere.com.au/9Series

PRECISION PAYS TRACTA_J63901_AU_9Series_FFM

AD-591996311.als - Base Edition 9

5/5/21 9:20 am

PRODUCT NEWS

auto weeder assembled

A US-built laser-wielding weed zapping robot will offer new efficiencies for organic farmers, its designers say. Chris McCullough reports

Above: New models for 2022 are now available for pre-order

Carbon Robotics’ machines utilise high-power lasers to eradicate weeds.

10 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 10

A

new weeding robot that uniquely uses lasers to exterminate unwanted plants has been released by Carbon Robotics in the US. The Seattle-based company has released its third generation Autonomous Weeder, which uses a combination of robotics, artificial intelligence (AI) and laser technology to safely and effectively drive through crop fields to identify, target and eliminate weeds.

However, if you are on the market for one of these robots you will have to wait until 2022 as all the 2021 models have already sold out. New models for the 2022 growing season are available for pre-order.

Unlike other weeding technologies, Carbon Robotics’ machines utilise high-power lasers to eradicate weeds through thermal energy, without disturbing the soil.

Farmers who operate automated robots have the ability to reduce their use of herbicides, reduce labour and costs, and improve crop yields.

Carbon Robotics chief executive and founder Paul Mikesell says advances in technology are opening up new opportunities for innovation.

“AI and deep learning technology are creating efficiencies across a variety of industries and we’re excited to apply it to agriculture,” he says.

“Farmers, and others in the global food supply chain, are innovating now more than ever to keep the world fed. Our goal at Carbon Robotics is to create tools that address their most challenging problems, including weed management and elimination.”

Carbon Robotics says the robots will bring farmers a significant increase in crop yield and quality – with lasers leaving the soil microbiology undisturbed, unlike tillage.

The lack of herbicides and soil disruption paves the way for a regenerative approach, which leads to healthy crops and higher yields.

It also promises a reduction in overall costs – helping to cut the costs of manual labour as well as of crop inputs – and creating a cost-effective weed control system to help create an economical path to organic farming.

Carbon Robotics’ ground-breaking technology is designed for row crops of as low as 80 hectares, with a single robot able to weed 6–8 hectares per day.

Since its founding in 2018, the company has worked closely with farmers to develop its technology, which supports effective and efficient weed elimination for both conventional and organic farming.

The robots have undergone beta testing on specialty crops farms, working on fields with a variety of crops, including broccoli and onions.

Farmer James Johnson has used Carbon Robotics’ technology on his property and has found it to be beneficial to his business.

“This is one of the most innovative and valuable technologies that I’ve seen as a farmer,” he says.

“I expect the robots to go mainstream because of how effectively they address some of farming’s most critical issues, including the overuse of chemicals, process efficiency and labour. These robots work with a variety of crops, are autonomous and organic. The sky’s the limit.”

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 1:02:34 PM

TradeFarmMachinery.com.au 11

圀圀圀⸀䄀一吀伀一䤀伀䌀䄀刀刀䄀刀伀⸀䤀吀⼀䄀唀 倀䠀㨀㄀㌀ 㠀㔀㠀 㤀㐀

⸀⸀⸀挀漀洀瀀 愀挀琀 椀渀 瀀漀眀攀爀昀 猀椀稀攀Ⰰ 甀 氀 愀渀搀 氀漀眀 琀漀 琀栀攀 最爀 漀甀渀搀 昀漀爀 攀砀琀 爀愀 猀愀昀攀 琀礀

攀 氀 戀 椀 猀 爀 攀 瘀 攀 爀 栀 琀 椀 ⸀⸀⸀眀 渀 愀 挀 甀 漀 礀 ⸀ ⸀ 攀 氀 漀 猀 挀漀渀 攀 栀 琀 渀 漀 猀 甀 挀 漀 昀 渀漀眀 ⸀ ⸀ ⸀ 猀 氀 椀 愀 琀 搀攀

吀栀攀 漀爀挀栀愀爀搀猀 愀渀搀 栀椀氀氀猀椀搀攀 猀瀀攀挀椀愀氀椀稀攀搀 吀爀愀挀琀漀爀

AD-591996311.als - Base Edition 11

5/5/21 9:20 am

PRODUCT NEWS

beauty compact An all new Kubota compact wheel loader has touched down in Australia

Above: The R540 wheel loader from Kubota is available now across Australia

T

he Kubota R540 has been designed with a range of new features intended to increase operator comfort and overall usability of the vehicle.

Included in the redesign is a new-look cabin, multi-function joystick and an increase in rated operation capacity, which combines greater comfort and smoother operation with functional stability.

Kubota Australia senior product manager Lars Pasedag says the new R540 will uphold the success and esteem of its preceding model, the R065, in both its cab and canopy models.

“We’re excited to improve our compact wheel loader range,” he says.

“The R540 has the same base platform as the R065, but added

space, an improved dash design and updated multi-function joystick in the R540 results in better visibility and more intuitive operation across both the cab and canopy models.

“By moving the control switches to the right-hand console, the new dash is a lot simpler and reduced in size.”

The pilot-controlled multi-function joystick is one of a series of improvements made by Kubota in the R540.

An auxiliary valve button has been added to remove the need for separate levers, which were previously found on the R065.

In doing so, the joystick can be operated by one hand in a move Kubota says will improve functionality.

“The new pilot control operated joystick and its smoother operation is in response to customer feedback, allowing users to open the four-in-one bucket while lifting or crowding.

It’s a seamless step-up for operators,” Pasedag says.

Reinforcements have been made to the main frame of the vehicle where the loader arm mounts, allowing for the new loader arm to taper in towards the cab to further improve the operator’s visibility when inside the cab.

The wheelbase has also been extended to improve the operating capacity by two per cent.

The R540 is powered by a 51 horsepower (38kW) V2607 engine that can meet Tier 4 Final emission standards with the addition of Common Rail technology and diesel particulate filter.

“We are really excited to bring the new R540 to market and deliver an improved compact loader,” says Pasedag.

The Kubota R540 is available throughout Australia now at Kubota dealerships.

two choices - double value from

$80,990

in stock now

powerfarm 110

synchro or power shuttle

OFFER ENDS 30TH JUNE 2021 WHILE STOCK LASTS

M A D E I N I T A LY

FFM-HH-5030590-CS-398

GREAT LOADER TRACTOR GREAT FARMING TRACTOR CLASSIC CHOICE

TOP CHOICE

4 4 4 4 4 4 4

4 4 4 4 4 4 4 4 4 4

4.4 LITRE PERKINS 400Nm SYNCHRO-SHUTTLE 24 SPEED SPACIOUS HI-VIS CAB LOADER WITH 4-IN-1 4-WHEEL BRAKING 4 HYDRAULIC REMOTES

Landini Powerfarm 110 4WD cab with FREE Loader and 4-in-1 bucket. World renowned Perkins 4.4 Litre Diesel engine for impressive performance and torque. This pure Italian is unmatched in $ per HP and great value.

Dealer delivery charges apply. Ask us about Inlon Finance. #Subject to eligibility.

12 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 12

4.4 LITRE PERKINS 416Nm POWER SHUTTLE POWER SHIFT 32 SPEED WITH CREEPER SPACIOUS HI-VIS CAB AIR SEAT LOADER WITH 4-IN-1 4-WHEEL BRAKING 4 HYDRAULIC REMOTES FRONT MUDGUARDS

For more information and your nearest dealer

1800 849 090

www.landini.ag/706 THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:56:03 PM

TradeFarmMachinery.com.au 13

GET USED TO BEST IN CLASS

When it comes to Agricultural and Forestry land clearing, FAE has been the top choice for rock crushers, stump grinders, forestry mulchers and tillers.

FAE supplies models to suit a variety of heavy duty applications with a wide range of tractor horsepower.

Contact us: 1300 981 337 / +61 3 9706 4088 or email info@fae-ap.com.au

AD-591996311.als - Base Edition 13

fae-group.com

5/5/21 9:20 am

COVER STORY

rain or shine The first of its fifth generation of tractors, the Valtra G Series has a powerful engine, a versatile transmission and a cab that sets new benchmarks for comfort and visibility

It’s a compact all-purpose tractor engineered to perform demanding frontloader tasks with excellent visibility and comfort.

14 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 14

L

aunched last year at a virtual event, the beginning of the fifth generation of Valtra tractors reveals a range designed to fulfil customer needs and provide the best possible tractor experience.

Made in Finland, the new G Series of tractors is built to be easy to operate, maintain and customise for the individual user.

It is a compact all-purpose tractor engineered to perform demanding front-loader tasks with excellent visibility and comfort, and is the first in the 100–145hp (75–108kW) range to offer SmartTouch controls and full precision farming capabilities.

The G Series comes in four models, G105, G115, G125E and G135. Each model is available with Valtra’s familiar powershift variants: Hitech has open centre hydraulics with mechanical rear remotes; Active offers load sensing hydraulics and power beyond; and Versu provides the award winning SmartTouch armrest with electronic rear remotes.

Customers will also be able to order their G Series tractors direct from the factory with a huge array of options to tailor their tractor to their individual needs.

For those requiring something extraordinary, the in-house Unlimited Studio provides everything from custom paint jobs to forestry/municipal equipment fitting.

Valtra Australia and New Zealand product manager Paul Morris says the G Series tractors are a compact but powerful farming tool.

“The G Series is primarily an all-purpose farm tractor that can be used for front-loader tasks, tillage and producing fodder, but is versatile enough to be easily adapted to specialist tasks like cultivating vegetables or shelter-belt trimming for example,” he says.

“Operating an all-purpose tractor like this should be easy, safe and comfortable for all tasks from using the front loader for feeding out to using the Valtra Guide technology for precision farming.”

Identifying the high level of front-loader usage in this sector, the new Valtra G Series has been engineered with a strong, balanced chassis and excellent forward visibility as the starting point.

Valtra has been renowned for its peerless chassis strength for decades and the G Series continues this, with no bracing brackets needed for the factory fitted loader subframes and front linkage.

MODERN AND SPACIOUS CAB The fourth generation of Valtra set a new benchmark for operator comfort and visibility, and the first offering in the fifth generation takes it a step further.

Front visibility is excellent thanks to the short, rounded bonnet and large sunroof. The high air intake and exhaust are hidden behind the A-pillars so there are no obstacles in any direction. A choice of air-suspended seats, adjustable spring cab suspension and a 3600 roof-mounted A/C system makes the G series cabin a very comfortable workplace.

The G Series has a modern and spacious cab with 5.7 square metres of glass, including 0.35 square metres in the panoramic roof. The controls are laid out thoughtfully with the operator’s natural movement in mind. The convenience level is further enhanced by electric mirrors, a phone holder and USB charging plugs and the new, easy-to-use machine dashboard in the instrument panel.

Versu models come with the multi-award winning SmartTouch Armrest, which provides easy access to all tractor settings as well as Valtra Guide and Precision Farming technologies. The SmartTouch Extend screen can be added as a second screen for improved functionality in the Versu or as a primary screen in Active to provide access to the same guidance and technology options as well as being a camera screen and ISOBUS monitor.

In addition to field and farmyard tasks, the G Series is also

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:50:17 PM

COVER STORY

suitable for forestry tasks – as Valtra tractors always have been.

For forestry tasks, the G Series can be specified with narrow mudguards, a steel fuel tank, polycarbonate glass, forest tyres, a rotating seat and cab protection.

The auxiliary light pack provides four working lights at the front and six at the rear, which also turn on automatically when reversing, facilitating work in dark conditions.

patented hydraulic assistant feature increases engine rpm based on demand from any of the electronic valves while automatically downshifting to maintain speed.

The rear linkage is rated at 50kN (minimum) across the entire lifting range with a 60kN max lifting force. The optional front linkage is rated at 30kN with a 45kN max. Front power take-off (PTO) is also available.

VERSATILE TRANSMISSION

RELIABLE AND COMPACT AGCO POWER ENGINE

The G Series has a 24+24R transmission with four ranges and six Powershift gears. The transmission is built in cooperation with GIMA in France, sharing some of the proven componentry with other Agco models but in a heavy duty casing that is unique to Valtra.

It adopts all the control systems from the N4 and T4 series tractors, including AutoTraction (brake-to-neutral) and Hill Hold functions. The shifts from B to C range and between C and D ranges are automated, allowing it to be driven like an automatic car. It even has a kick-down function for fast acceleration and a very easy to use cruise control system.

Versu models go a step further, with the SmartTouch armrest allowing the tractor to be operated by just the throttle pedal or driving lever like a CVT. Using the standard radar, Versu models also feature Valtra’s automatic slip regulator. This system works like traction control to limit the output of the transmission when wheel slip occurs.

It is fully adjustable, reduces tyre wear and fuel consumption, and increases the ability to achieve target working depth compared to draft control.

HiTech models have an open hydraulics system that produces 100 litres per minute, while Active and Versu models have loadsensing hydraulics that produce 110 litres per minute. Up to three mechanical or four electronic valves are available at the rear and up to four electronic mid-mount valves can be optioned. Valtra’s

The new G Series is powered by reliable four-cylinder 4.4-litre Agco Power engines. The compact size of the engine enables a very low nose that provides excellent visibility.

The engine complies with Stage V emissions standards without exhaust gas recirculation. An electronic wastegate and 1,600 bar Bosch common rail injection offer fast response and plenty of torque across a broad range of engine speeds.

The G105, G115 and G125E all offer an additional 5hp (3.7kW) boost, while the G135’s 10hp (7.5kW) boost allow it to achieve 145hp (108kW). One of the key features of Valtra tractors is the wide availability of engine boost.

Sigma power ensures maximum boost power is always available based on PTO demand, even when the tractor is stationary. Tractive boost is available from the B5 gear (around 6km/h) and above.

The G125E is the EcoPower model in the G series. By selecting the EcoPower mode the operator changes the characteristics of the engine so that it produces peak power at lower 1,750rpm instead of 1,900rpm. This also results in higher peak torque at lower rpm and lower fuel consumption and is ideal for heavy draft applications like ploughing or seeding. Valtra’s EcoPower mode saves nature, money and also your hearing thanks to their lower noise.

With production already commenced for European markets, customers should speak to their local Valtra dealer to secure an early build slot for their Valtra G Series.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM2106_398 editorial.indd 15

Above: The G Series comes in four models, G105, G115, G125E and G135

The G Series is primarily an all-purpose farm tractor that can be used for frontloader tasks, tillage and producing fodder.

TradeFarmMachinery.com.au 15

6/05/2021 12:50:17 PM

INDUSTRY NEWS

big bucks Acgo and CNH Industrial flag sales boost in last quarter

Above: The Case IH AFS Connect Magnum arrived in Australia last year and is one of CNH Industrial’s brands Above right: AGCO: Massey Ferguson’s 5S tractor range is one of the newest models from an Agco brand

16 TradeFarmMachinery.com.au

FFM2106_398 Editorial.indd 16

T

wo of the world’s biggest machinery manufacturers have reported big sales increases in their quarterly results, with Australian demand a contributing factor.

Both Agco and CNH Industrial have seen increased sales globally, with the Asia-Pacific regions outperforming other parts of the world.

For Agco, there was a 65.9 per cent increase in net sales across the Asia/Pacific/Africa region in the first quarter of 2021 compared to the same time last year, which was when the COVID-19 pandemic began to take effect.

Increased Australian sales were noted in Agco’s financial report as contributing to the regional growth.

Overall, Agco reported a 19.8 per cent net sales increase around the world, factoring in currency value changes, and overall sales of almost US$2.4 billion (A$3.1 billion).

“Favourable market demand and positive market response to our technology-focused products helped produce sales growth and margin expansion across all regions,” says Agco chairman, president and chief executive officer Eric Hansotia.

“Our long-term global view remains positive. Increasing demand for commodities, driven by the growing world

population, as well as rising emerging market protein consumption and biofuel use, are expected to support elevated farm income and healthy conditions in our industry.”

CNH Industrial’s data was less region-specific, with Australia being included in the ‘rest of world’ figures alongside North America, South America and Europe.

Sales in the ‘rest of world’ region were up 57 per cent for tractors, 30 per cent for combines, 33 per cent for light construction equipment and 47 per cent for heavy construction equipment, all compared to the first quarter of 2020.

All four of these figures were higher than the global increases and ‘rest of world’ had the highest increase of any region in every category except light construction equipment.

The company’s total sales reached US$7 billion (A$9 billion) for the first quarter, an increase of 36 per cent from this time last year with currency changes factored in.

“We overcame unprecedented supply chain challenges, rising commodity costs and the persistent impact of COVID-19 to deliver solid revenue growth and margin expansion, also above Q1 2019 performance,” CNH Industrial CEO Scott Wine says.

“All our businesses and brands executed well, and we were particularly encouraged by the strong results agriculture delivered.”

Both Agco and CNH Industrial are listed on the New York Stock Exchange.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 3:03:56 PM

TradeFarmMachinery.com.au 17

GERONIMO FARM EQUIPMENT ROCKPICKER FEATURES HYDRAULIC DRIVE. Match the reel bat speed to your picking needs, stop the reel to pick a single large rock or clear a jammed rock by reversing the reel.

RR250ST

1.25 CU YD / 1 CU M CAPACITY 8.7’ / 2.7 m Transport Width

WIDE RANGE OF RAKE HEIGHTS. Adjust rake height and use bats for support to pick large rocks and load them into the hopper. Or, keep rake at a minimal angle to separate rocks from dirt quickly and with minimal ground disturbance.

SHOCK PROTECTION. Both reels and forks are shock-protected to allow our to remove extra-large rocks.

The small but mighty RR250ST picks rocks up to 24” x 45” (61 x 144 cm) and the RR900ST handles rocks up to 28” x 55” (81 x 140 cm).

SIMPLE TO DUMP ROCKS. An electric solenoid lets you unload with the flick of a switch from your tractor.

READY TO MOVE. The Hydraulic angled hitch allows you to go from transport to field mode and back again quickly and easily.

RR900ST

3.2 CU YD / 3.2 CU M CAPACITY 10.8’ / 3.3 m Transport Width

RAKE YOUR

ROCKS Clean up your field in record time when you use a Rite Way Windrower in conjuntion with your ROCKPICKER.

WINDROWER FEATURES

ROCK WINDROWER

RW1200HD

RM6685625

AFFORDABLE AND EFFICIENT. An affordable way to speed up your rock picking.

Handles rocks from 1½’’ to 12’’ (4 to 30 cm) diameter.

THREE-ROW SPIRAL DESIGN. For improved speed and efficiency of delivering rocks to windrow.

REPLACEABLE HARD-SURFACE TEETH. Ensures long life of the equipment.

HYDRAULIC DRIVE. Hydraulics control both the depth of the rake and the field to transport positions.

SEEDBED PREPARATION. Efficiency breaks up clumps and prepares the soil for seeding.

WORKING WIDTH. 142” ( 3½ m) WINDROWER STANDARD EQUIPMENT: Replaceable hard surface teeth

Ashley Webster Ph: 0407 431 566

AD-591996311.als - Base Edition 17

Head Office - 77 Pridham Street, Cowra Office Number: 02 6341 3369 Email: sales@geronimo.com.au Web: www.geronimo.com.au

Chris Sweeny Ph: 0417 537 482

5/5/21 9:20 am

INDUSTRY NEWS

Improvements to satellite connectivity, geolocation and remote sensing over the next 10 years could be a rocket for Australia’s agricultural sector profits. Anthony Wingard reports

Above: A recent ANU study looked into the possible opportunities for integrating space technology into farming

The farmer of the future will have space technology fully integrated into their everyday production systems and decision making.

18 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 18

T

he same technology that first put man on the moon could soon be used to boost Australia’s agricultural industry by upwards of $15 billion, according to a study.

The study, conducted by the Australian National University (ANU) was released by AgriFutures Australia recently and outlined the benefits of using space technologies to further advance the agricultural sector.

Space-based Technologies – Opportunities for the Rural Sector aimed to give producers awareness of the possibilities of available space technologies within the industry and the potential insights it could offer over the next decade.

It found that improvements to geo-location alone could benefit the industry by $2.2 billion over a 30-year period.

Similarly, satellite connectivity has the potential to add $15.6 billion to the gross value of production in sectors such as agriculture, fisheries and forestry.

AgriFutures Australia senior manager – rural futures, Jennifer Medway, says while other industries, such as mining, have long utilised space and its relevant technologies, and the rural sector is on the cusp of unleashing this potential.

“It’s exciting. The farmer of the future will have space technology fully integrated into their everyday production systems and decision making,” says Medway.

“For instance, dashboards will enable farmers to remotely manage manual processes and interoperable data systems will radically shift the way on-farm decisions are made.

“All this is made possible through space technology, which has the potential to revolutionise the working day of tomorrow’s farmers.”

The report suggests that while some technologies are already employed throughout the industry, such as satellite imaging, low-bandwidth sensors and GPS tracking, the use of spacetech is still in its infancy, and the scope and opportunities they present are yet to be fulfilled.

Despite that, the technologies currently in use have already been beneficial, delivering safer farms, a more digitally connected rural community, increased water efficiency and an overall more forward-thinking ‘global’ mindset, the report says.

Australia’s goal of growing the agricultural sector into a $100 billion industry by 2030 will ultimately hinge on space-based technology, which will also be imperative if the country aims to remain competitive on the international scale.

For agriculture, the use of space-based technology largely falls into three distinct categories: remote sensing, geo-location and connectivity – all of which can be fully maximised to help farmers across the country.

The report found the large-scale nature of broadacre cropping and livestock farming in Australia lends itself well to spacebased remote sensing, given the speed with which satellites can scan large areas. Comparatively, more intensive farming systems such as horticulture and dairy can be better served by drones or other in-field technologies.

Remote sensing includes technologies such as light cameras, which can map crop distributions from local to national scales; infrared cameras, which give insights into plant heath and

vegetation and soil moisture; and satellites, which can estimate plant growth using normalised difference vegetation index (NDVI).

Director and Agronomist at Ag Grow Agronomy in NSW, Barry Haskins, says crop sensing technologies can help farmers maximise the use of their land.

“Sometimes you can see areas that fertiliser or sowing has missed, before we go out on the farm for crop scouting,” says Haskins.

“When we are dealing with very large-scale farms and paddocks, it is useful to see the area by satellite. It doesn’t save us time, but it allows us to be more targeted and more strategic.”

SmartSat Cooperative Research Centre, a consortium of universities and other research organisations aimed at developing advancements in telecommunications and connectivity, has already pledged its support of remote sensing development by investing in a $25 million research program in advanced telecommunications, intelligent satellite systems, Earth observation and remote sensing analytics.

Geo-location provides data on positioning, navigation and timing of machines, equipment and livestock in real time; and by using these satellite technologies, precise information can be gathered.

Currently, GPS systems deliver real-time results for farmers in Australia with an accuracy of around one metre; however in 2025, a new Satellite-based Augmentation System (SBAS) will be unveiled in Australia and New Zealand, which will improve accuracy to just 10cm.

The opportunities in geo-location are vast; however one area has been specified in the report – autonomous farming – an area which has undergone sizeable development in recent years following advances in robotics and machine vision.

Advantages of geo-location include reduced labour costs, easier transport and less soil compaction while another study in the United Kingdom has found these technologies are already economically viable for farmers.

Connectivity has long been a limitation for farmers in rural and remote Australia given the unreliability of coverage in the affected areas and the cost constraints of improving infrastructure; despite over 75 per cent of rural farmers stating that internet connection was important to their business.

Already though, recent technical advances from satellites and telecommunications companies have improved the availability of connectivity; ensuring farmers have access to mobile and data connections – something the report says is ‘crucial to enable the adoption of many new technologies’ and ‘ensure Australian agriculture remains globally competitive’.

Together, the technologies of remote sensing, geo-location and connectivity can help fulfil the potential of space technologies in agriculture, which Medway says is imperative to the future of the industry.

“Agriculture’s time is now. To stay competitive and continue to up the ante on increasing productivity and sustainability, we need to look to fixes ‘outside the square’,” she says.

“Space technology is one of those fixes.”

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:58:02 PM

FFM-HH-5031142-CS-398

space race

INDUSTRY NEWS

2021 SIMA award winners

bountiful harvest

Soils and Crops Category Gold Smart-Apply Intelligent Spray Control System – Smart Guided Systems Silver Speed Control – Sulky Bronze Farmdroid Fd20 – Stecomat

New Holland has claimed two medals at the SIMA 2021 Innovation Awards, with Kuhn and Smart Guided Systems also recognised

From Harvest to Storage

W

Livestock Farming and Renewable Energy

hile organisers of France’s International Exhibition of Solutions and Technologies for Efficient and Sustainable Agriculture (SIMA) were compelled to call off this year’s event, the prestigious innovation awards showcase went ahead online.

Award winners include Kuhn, for its Aura autonomous mixer wagon; British potato farming manufacturer Downs for its CropVision optical grader; the VitiDrive universal controller for electric winegrowing machines; and the Smart Guided Systems for its Smart-Apply Intelligent Spray Control System.

US-based New Holland stood out by taking out two medals – a silver medal in the From Harvest to Storage category for its NutriSense in-harvest nutrient analysis system; and a bronze medal in the Parts, Services and Onboard Electrics category for its cleaning system pressure sensors.

New Holland brand president Carlo Lambro says both technologies will help farmers increase efficiency and sustainability without losing profitability.

“The two innovations awarded today address two important issues they face with the harvest, helping them to make informed decisions. [NutriSense provides] agronomic data they can use to market their crops most profitably. [The cleaning sensor] enables them to take proactive actions to reduce grain losses as they are harvesting,” says Lambro.

PROUDLY MADE IN ITALY

Gold CropVision – Downs Silver NutriSense – New Holland Bronze Venti Javelot – Javelot Gold Aura – Kuhn Silver Panneaux Cogen Air Thermovoltaiques – Base Bronze Fusion Tipper – Deguillaume

Parts, Services and Onboard Electronics Gold VitiDrive – Vitibot Silver Cenius – TX Zone Finder Bronze Pressure sensor in the cleaning system – New Holland New Holland’s NutriSense uses near infrared light (NIR) to analyse, record and map crop composition during harvest time – measuring data including grain grades, protein or fat content to help famers make informed decisions that will help maximise crop prices.

New Holland says with NutriSense, “customers can improve their agronomic knowledge of their fields”.

New Holland’s cleaning system pressure sensors – which earned a bronze medal at the awards – help farmers harvest faster by anticipating cleaning shoe overloads.

The system measures the pressure in the cleaning shoe and up and below sieves and alerts the operator in real time when the system becomes overloaded using New Holland’s intelliview IV display, helping them make decisions to increase productivity and reduce losses.

Above: New Holland won a silver award for its NutriSense in-harvest nutrient analysis system

INVEST IN QUALITY HAY MAKING EQUIPMENT.

FFM-HH-5031142-CS-398

Suited to farmers and contractors, discover how Enorossi hay making equipment could benefit your land today.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM2106_398 editorial.indd 19

www.clarkfarmequipment.com.au

Clark Farm Equipment

sales@clarkfarmequipment.com.au

clarkfarmequipment

1800 648 384

Clark Farm Equipment TradeFarmMachinery.com.au 19

6/05/2021 12:56:32 PM

INDUSTRY NEWS

Left: The apple-picking robot was tested at Fankhauser Apples in Drouin, Victoria

fruit of knowledge Victorian researchers have developed an apple-picking robot that can plan the best way to pick fruit without unnecessary tree damage

A

Victorian farm has hosted tests of an apple-picking robot that university researchers hope could help solve Australia’s agriculture labour shortage.

A team from Monash University’s Department of Mechanical and Aerospace Engineering spent February and March testing the robot at Fankhauser Apples in Drouin, east of Melbourne, which they say can successfully identify, pick and deposit an apple in seven seconds.

“The robot grasps apples with a specially designed, pneumatically powered, soft gripper with four independently actuated fingers and suction system that grasps and extracts

apples efficiently, while minimising damage to the fruit and the tree itself,” says project leader Dr Chao Chen.

“In addition, the suction system draws the apple from the canopy into the gripper, reducing the need for the gripper to reach into the canopy and potentially damaging its surroundings.

“The gripper can extract more than 85 per cent of all apples from the canopy that were planned for harvesting.”

During the research, the robot was only operating at half its possible speed and had a median harvest rate of 12.6 seconds per apple.

This reduced to nine seconds per apple in what was described as “streamlined pick-and-drop scenarios” during the trial period.

One challenge the researchers had to overcome was how the robot would firstly detect the apples and then identify any obstacles within its path.

Chen says an advanced algorithm that quickly worked out the safest and best path to each apple was crucial to the robot’s efficiency.

“Our developed vision system can not only positively identify apples in a tree within its range in an outdoors orchard environment by means of deep learning, but also identify and categorise obstacles, such as leaves and branches, to calculate the optimum trajectory for apple extraction,” he says.

“We also implemented a ‘path-planning’ algorithm that was able to generate collision-free trajectories for more than 95 per cent of all reachable apples in the canopy.

“It takes just eight seconds to plan the entire trajectory for the robot to grasp and deposit an apple.”

Left: European garment manufacturers are already doing their calculations on volume requirements for the Northern Hemisphere winter

golden fleece Wool prices have rebounded in early 2021 and the forecast is positive as a global COVID-19 recovery gets underway, reports ANZ

20 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 20

F

orecasts of Australia’s wool industry appear optimistic according to ANZ’s Agri Commodity Report, with the sector already projected for a strong year ahead.

Across the first quarter of 2021, the price of wool has increased, returning to a price last seen one year ago before they fell by 50 per cent from January to September 2020.

Currently, the price of wool sits steady at A$13/kg in April 2021; a stark contrast from the $8.50 it fetched last September – the lowest point the Eastern Market Indicator has fallen over the past year.

The report suggests that the demand for wool will be largely dictated by the northern hemisphere winter at the end of the 2021 calendar year, which will have a major bearing on several aspects of Australia’s wool sector across the year.

ANZ associate director of Agribusiness Research, Madeline

Swan, says European markets and the global recovery from COVID-19 will be large factors in the strength of the wool industry across 2021.

“The next Northern Hemisphere winter won’t be rolling around until the end of this year, however the world’s woollen mills and clothing manufacturers will already be doing their sums on the volumes of wool required to provide for that time when it comes,” Swan says.

“As large European markets for woollen garments such as France and Italy continue to feel the impact of COVID lockdowns, suppliers are needing to look longer-term.

“On current outlook, this could be to a time when national vaccination programs have reinvigorated economies and consumer behaviour, so garment manufacturers should start planning their supply chain processes accordingly.”

Overall, the forecast for the industry is positive. While the short- and medium-term wool demand is dependent on the economic conditions across the globe, ANZ expects the supply of Australian wool in the market to grow for at least the next five years.

The wool clip is also expected to increase, climbing by 1.7 per cent in 2020-21 to 288,000 tonnes despite a five per cent fall in the number of sheep shorn. This result is largely due to the positive impact of sheep condition and wool yields of the good season.

A rise has been predicted in the overall levels of wool production, which is set to increase by over 20 per cent by 2025-26. However, concerns have been raised given this could then lead to a surplus of domestic wool stockpiles to a level that could cause structural correction in the market.

Falling prices as a result of increased wool production could also see many wool producers move away from wool sheep.

Wool exports are likely to grow at the same rate as production, though, which will limit the levels of end stocks.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:57:22 PM

AL EOFY D DEAL EOFY E A L DEAL EOFY E OFY DEAL DEAL EOFY EOFY DEAL DEAL EOFY EOFY DEAL DEAL EOFY DEAL EOFY EOFY DEAL

RAKES

ROCKPICKE

RS

WWW.ELHO AUSTRALIA .C

DEAL EOFY OM.au ww D E A L E O $ F Y DEAL EO 5 DK INSTA DEAL EO1 FY DEAL EO FY 0 T EAL EOFY N A S S FY DEAL EO E S T DEAL EOF DEAL EOFY W R I FY Y DEAL EOTE OFF DEAE EFNYDD LXETO EEDAU F Y DEAL EO LYJU LN ETOIF N FY E DEAL30 . FY DE E O AL EOFY WWW.sama sz.com.au

TEDDERS

MOWERS

EAL EOFY D EAL EOFY D EAL EOFY D EAL EO CFOYNDTEAACLTEYOO EAL EOFY D U F R Y EAL EOF DELA O EAL EOFY D LCEAOLFY D E A D L EA E R GEETAILNEQ L EOTFO O YDD F A Y U EYA!L EOF D I CK EAANLDED EAL EOFY D O F Y O N’D T EMAIL EAL EOFY D EO SS OFUYT!DEAL EOF EAL EOFY D EAL EOFY D EAL EOF Ph: 03 5231 6999 www.colacag.com.au FFM-FP-5012885-CS-398

AD-591996311.als - Base Edition 21

5/5/21 9:20 am

INDUSTRY NEWS

high stakes Beef growers will face a variety of challenges in the year ahead, industry specialist Rabobank predicts

Above: Although breeding, slaughter and export numbers have dropped, Rabobank says there is an opportunity to shape future development of the beef industry Inset: Angus Gidley-Baird

Australia’s position in the global protein world needs to be considered in rebuilding the herd.

22 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 22

E

xperts from Australia’s beef industry have proclaimed a ‘once in a generation opportunity’ for the sector amidst a plethora of challenges, including the lowest breeding cattle inventory in three decades.

Agribusiness banking specialist, Rabobank, released its seasonal outlook recently, outlining both the challenges faced by the beef industry as well as the opportunities to shape its future as it aims to respond from a historically difficult 2020.

Paramount to the sector’s challenges is the limited cattle supplies underpinned by Australia’s scarce existing stock and low breeding numbers, which have led to a drop in slaughter numbers, beef exports and live exports.

Rabobank predicts that the 2021 Australian cattle slaughter is set to be 6.7 million head; a decrease of six per cent from 2020.

Beef exports are also expected to be down by five per cent, despite improved economic conditions in a recovering food service sector that was disrupted following the outbreak of COVID-19 one year ago.

Live exports are also set to be constrained due to higher prices and a reduced cattle population.

But, given the challenging landscape the country’s beef industry currently finds itself in, many are highlighting the opportunity to reassess and reevaluate the direction the industry should be heading in in the future.

“Australia’s position in the global protein world needs to be considered in rebuilding the herd,” the report says.

“Are we going to be a supplier into high-quality niche markets, a commodity supplier of lean beef to global trade, an exporter of live cattle or exporter of value-added beef?”

Rabobank’s report suggests results for the 2021 year will be dictated by limited cattle supplies, which while causing an inflated price for cattle, has also challenged capital efficiency, meaning the many feedlots running below capacity will struggle to recover throughout the coming year.

With cattle stock around the country at its lowest levels in around 30 years, re-stocking the national herd would come at a premium given the heightened price of cattle – a dilemma Rabobank senior animal proteins analyst, Angus Gidley-Baird, says is a significant problem and one of many decisions facing beef farmers.

“Decisions taken this year are not just about whether

to restock at high prices, but also about which genetics, productions system attributes, feeding regimes, supply chains and end customers are needed to build a sustainable basis for the businesses in the future,” says Gidley-Baird.

“Such a chain of events has led to, we believe, some of our lowest breeder numbers in decades and, as a result, low slaughter numbers this year and a big rebuild process over the coming years.”

Favourable seasonal conditions are expected to serve as some reprieve for the industry, with cattle prices easing throughout the year as some of the urgency of producer restocking demand recedes.

Beef consumption is forecast to remain steady throughout Australia this year, following a 12 per cent decrease per capita over the past two years as the popularity of low protein trends continues to rise.

However, the plateauing of domestic beef consumption “will not be enough to offset lower production volumes”, the report says – which according to Gidley-Baird, will see export volumes drop five per cent.

Globally, the high price and low beef inventory have meant beef and live exports have also been challenging, not least given the ongoing trade tensions with China.

The China market is set for a large decline in export volume Rabobank, however, the Australia beef sector is set to be supported by the established markets of Japan, South Korea and the United States, which have all remained steady.

“Japanese and South Korean markets have remained relatively steady through 2020 and these long-standing markets are expected to maintain import volumes of Australian beef in 2021, although we will face strong competition from the US, which is anticipated to increase exports through the course of 2021,” says Gidley-Baird.

Live exports to Indonesia, which fell 31 per cent in 2020, are set to recover slightly throughout the year, while demand from Vietnam, which imported 11 per cent more beef last year, is set to regress as the nation’s protein shortage dissolves.

“As global economic conditions improve and food service trade opens up, we hold a positive view on demand for grain-fed beef,” says Gidley-Baird, who suggests the market for feedlots looks optimistic despite the US’ growing global footprint for grain-fed beef.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:58:59 PM

TradeFarmMachinery.com.au 23

23 McCormick Road Kyabram Victoria 3620 / Ph: 03 585 22 444 / info@jnrengineering.com.au

LP Series

DG Series

Bale Bull Round

Introducing the LP8000, 8 meter or 6 meter width Land Plane, twin mast independent for lift precision, dragging capabilities of approximately 5 cubic meters.

The DG Series is currently being manufactured in 3.6m or 4.2m width Drag Grader has independent lift for laser precision. Dragging capabilities of approximately 3.5-4.5 cubic meters

The BBR maintains a strong robust design capable of handling the heaviest bales. This machine is capable of carrying two bales and feeds on both sides. It is one of the only machines in the market that is able to feed the toughest of silage bales

HDE Ejector Cut Sizes 3.6 & 4.2m -Rips -Carries -Cross levels -Laser levels.

www.jnrengineering.com.au

Leopard Ejector

HDB Bucket

Cut sizes 3.6m & 4.2m -Rips -Carries -Cross levels -Laser levels.

LB Bucket

Cut sizes 2.7m & 3.0m-Rips -Carries -Cross Levels -Laser Levels.

Bale Bull Square

Features an adjustable moving arm for feed out control and on road transport, capable of carring two bales.

XSE Ejector

Cut sizes 1.8m, 2.4m -Rips -Carries -Cross levels -Laser levels

FFM-FP-5145966-TS-365

Cut Sizes 3.0m, 3.6m & 4.2m-Rips -Carries -Cross Levels -Laser Levels.

For more info, check out our YouTube Channel and Facebook Page under JN&R Engineering

AD-591996311.als - Base Edition 23

5/5/21 9:20 am

SPONSORED CONTENT

built strong Distributed in Australia by Brisbane Mini Excavators (BME), Hercules wheel loaders are built strong for all-round agricultural work

Above: The Hercules H668D loader Above right: The Hercules H700 loader

T

he Hercules H series and HD series loaders stand out in a league of their own. The H series is designed more towards general agricultural work – ‘the farm all-rounder/work horse’; and the HD series is ideal for heavier agricultural usage, such as dam building, logging, stick raking and ripper work.

All loaders have heavy duty axles, a constant 4x4 drive and are powered by Cummins engines or Cat nominated engines.

All models come with an extra-large deluxe cabin with 360 degree optimum visibility, ergonomic electronic pilot joystick controls and fitted with a high volume integrated air conditioning designed to meet Australian standards.

All models come equipped with hydraulic quick hitching, heavy duty tow points and an advanced European-quality transmission.

Your daily service checks can be made from ground level with the engine and radiator cover opening from ground level to provide ease of access, so accessing your greasing points, oil levels and fuel filters will make your life easier on the job site.

The H series models run a dry brake system combining air over hydraulic disc brakes. The disc brakes are self-cleaning and are easily maintained with debris covers for protection.

Manual handbrakes are standard in all models. The HD series braking system has Cat technology-certified parking brakes and improved material heat treatment, increasing durability in the harshest conditions.

The HD Series also has two brake air tanks and a single circuit brake system with an air out-take port for convenient daily servicing.

Hercules has a fully dedicated parts division to support loader maintenance and many of the parts can be dispatched within 24 hours. Its highly trained service division and onsite mechanical workshop are available for aftersales support.

BME Sales is the Australian distributor for Hercules loaders. located half way between the Gold Coast and Brisbane in Yatala. It’s a family-run business for over 30 years, specialising in loaders, excavators, graders and attachments, and has a rental division supplying variety earthmoving machinery to local councils and contractors.

Call the team at BME Sales today to discuss your loader requirements; you can see the difference in the quality of a Hercules loader: 07 3807 4333

Wheeled Loader Range

H700

7,300kg 2,000kg

Operating Weight Rated Load

Cummins Engine Power

in stock 75kw/100hp Ready for immediate delivery!

H850

Operating Weight Rated Load

8,500kg 2,500kg

Cummins Engine Power

97kw/130hp

H1050

Operating Weight Rated Load

in stock Ready for immediate delivery!

10,600kg in stock 3,000kg Ready for

Cummins Engine Power

110kw/150hp

immediate delivery!

H1250

Operating Weight Rated Load

12,000kg 4,000kg

Cummins Engine Power

134kw/180hp

in stock Ready for immediate delivery!

28 Old Pacific Highway Yatala Q 4207

QLD – NSW Steven - 0408 627 397 24 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 24

QLD – NSW Ross - 0488 062 696

Ph: 07 3807 4333

www.bmesales.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:50:59 PM

TradeFarmMachinery.com.au 25

WHEEL LOADERS & EQUIPMENT

HD 6 SERIES

BUILT BY CATERPILLAR (QUINGZHOU) LTD

668D

Rated Power

“BUILT BY THE BEST”

The Hercules wheeled loader and equipment range built for the Australian agricultural and construction environments. Feedlots, general farm use, material handling, quarries, construction and waste recycling.

178kw/240hp Operating Weight

21,000kg Rated Load

6,000kg Bucket Capacity

3 - 5.5m3 Cabin

ROPS/FOPS

Enquire about the Hercules range today.

636D H737

Rated Load

3,000kg Rated Load

3,500kg

Operating Weight

11,000kg 125hp

HERCULES 636D HERCULES 656D 130HP 220HP

HERCULES 658D 220HP

HERCULES 668D 245HP

HERCULES 676D 270HP

All ‘6’ Series Built by Caterpillar (Qingzhou) Ltd

7,250kg 125hp

HERCULES 680D 310HP

QLD – NSW Steven - 0408 627 397 QLD – NSW Ross - 0488 062 696

AD-591996311.als - Base Edition 25

Operating Weight

28 Old Pacific Highway Yatala Q 4207

Ph: 07 3807 4333 www.bmesales.com.au

5/5/21 9:20 am

EVENT NEWS

events calendar Here are upcoming Field Day and agricultural events for 2021. Information was current as of going to press

Hort Connections – Brisbane AUSVEG and PMA Australia-New Zealand Limited (PMA A-NZ) have again united to deliver the joint industry conference and trade show Hort Connections.

Following on from the successful Hort Connections 2019 in Melbourne, Hort Connections is an opportunity for networking, education and business for the entire fresh produce industry.

WHEN: June 7-9, 2021 MORE INFO: https://hortconnections.com.au

CRT Farmfest – Toowoomba CRT Farmfest is Queensland’s largest primary field day. More than 2,500 individual companies and organisations will come to together to exhibit everything from ATVs and boomsprays to grain driers, harvesters and rock pickers.

WHEN: June 8-10, 2021 MORE INFO: https://acmruralevents.com.au/farmfest/ home

Ag-Grow Field Days – Emerald Ag-Grow dates back to 1989, servicing central Queensland with some of the best the agriculture and mining sectors. Attracting over 1,500 companies and crowds in excess of 28,000 visitors Ag-Grow is more than a field day – it is a complete marketing package.

WHEN: June 24-26, 2021 MORE INFO: www.aggrow.com.au

Mudgee Small Farm Field Days – Mudgee The Mudgee Small Farm Field Days has been running for over 40 years and attracts approximately 20,000 people per year. With the mission to inform, educate and connect rural people with information and solution providers there are free demonstrations and talks along with commercial stalls, live music and activities to suit the whole family.

WHEN: July 9-10, 2021 MORE INFO: https://mudgeefielddays.com.au

Katherine Show and Rodeo – Katherine The biggest community event in the region, the Katherine Show is a must for all. Two days packed full of events

such as showrides, amusements, Campdraft, rodeo and equestrian events. The best work from the community is displayed in the pavilions. For the animal lovers there is plenty to see with poultry entries, chook auction, cattle show and pets.

WHEN: July 16-17, 2021 MORE INFO: www.katherineshow.org.au

Australian Sheep & Wool Show – Bendigo The Australian Sheep and Wool Show is your one stop shop for all things sheep. More than 2,700 sheep and 30,000 people assemble in Bendigo for three days in July for largest show of its type in the world.

WHEN: July 16-18, 2021 MORE INFO: www.sheepshow.com/default.asp?_=Home

Royal Darwin Show – Darwin With the aim of promoting, encouraging and assisting the development of primary industry, commercial, cultural activities, mining and industrial resources of the Northern Territory, the Royal Darwin Show has livestock, a horticultural pavilion, food, entertainment and a carnival.

WHEN: July 22-24, 2021 MORE INFO: https://darwinshow.com.au

Sheep Connect - Hamilton Sheepvention Rural Expo has been replaced this year with Sheep Connect 2021 due to COVID-19 restrictions. Along with trade exhibitors, Sheep Connect will include a one day conference on the Monday and a ram sale on the Tuesday.

WHEN: August 2-3, 2021 MORE INFO: www.hamiltonshowgrounds.com.au/?page_ id=300

Mingenew Lions Midwest Expo – Mingenew The largest agricultural field day in Western Australia’s Mid West, this expo aims to providing a venue for businesses to exhibit to the area’s regional and remote communities.

It showcases the future of farming and agricultural technologies and plays host to some of the biggest names in the industry, providing an exciting insight into what the agricultural sector has to offer and highlighting the technologies of tomorrow.

WHEN: August 11-12, 2021 MORE INFO: www.mmwe.com.au

For the full year’s calendar of events: tradefarmmachinery.com.au/events

2.5T - 21T AVAILABLE NOW, NATION WIDE. FROM YOUR LOCAL DIECI DEALER. 1300 888 479 26 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 26

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:58:25 PM

TradeFarmMachinery.com.au 27

BIG VALUE COMPACT MACHINES

2.5 tonne 5.78 m

AGRI FARMER 30.7

AGRI FARMER 30.9

Available in high or low cab

Available in high or low cab

3.0 tonne 6.35 m

3.0 tonne 8.70 m

With excellent features, high versatility and great handling, the Dieci range of compact agricultural telehandlers are designed to meet the needs of any work site.

Compact and agile, these vehicles are tailored to suit the harsh Australian conditions and handle loads in even the tightest spaces.

With a wide range of attachments available, there is a Dieci telehandler to perfectly suit your application, no matter what the requirement.

FFM-FP-5204974-CS-398

MINI AGRI 25.6

Contact Dieci Australia on 1300 888 479 or visit www.dieciaustralia.com.au to find your local Dieci dealer

AD-591996311.als - Base Edition 27

5/5/21 9:20 am

EVENT NEWS

1

2

3

4

more to see Thousands flocked to the Seymour Alternative Farming Expo last month to check out the latest trends in small farms.

Lincoln Bertelli was there 1. J ohn Deere slope loader

B

ig crowds went through the gates at the Seymour Alternative Farming Expo in another step towards Victoria’s COVID-19 recovery.

Held over three days between Friday April 16 and Sunday April 18, an estimated 20,000 people visited the 29th expo and had the choice of about 300 exhibitors to browse.

The expo also provided some dealers with the chance to showcase new pieces of equipment for more specialised farming jobs.

Some of the equipment on display included:

2. Jaylor mixer 3. McCormick S75 tractor 4. McCormick S90 tractor

The Jalor 5100 is ideal for supplemental feeding of beef cows during calving.

28 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 28

McCORMICK S-MAX TRACTORS Two new tractors from McCormick’s S-Max series have a lot in common – despite one obvious difference.

The S-Max 75 Cab and S-Max 90 ROPS both have four-cylinder turbo engines, two-speed power take-off, two sets of hydraulic outlets and 12x12 shuttle transmission.

Their horsepower is, as the names suggest, 75hp and 90hp (56kW and 67kW) respectively, but the most noticeable difference is the enclosed cab of the S-Max 75 Cab, as opposed to the open design, with rollover protection, on the S-Max 90 ROPS. Simplicity and strength have been McCormick’s goals with the S-Max range of tractors.

JAYLOR 5100 FEED MIXER Canadian manufacturer Jaylor has introduced its 5100 Mini TMR mixer into the Australian market. One big advantage of the 5100 is that it runs self-propelled with a 22hp (16kW) petrol engine, meaning it can be operated without a tractor. Designed for dairy farmers, it is ideal for supplemental feeding of beef cows during calving and the fact it is smaller than a traditional feed mixer means it is ideal for tight spaces in yards or sheds.

The 5100 mixer has a 2.58 cubic metre capacity, hydrostatic pumps, heavy-duty tyres, remote control and an electronic scale indicator for accurate weighing.

JOHN DEERE 603R SLOPE LOADER Only arriving in Australia late last year, the 603R loader has a 1,938kg lift capacity at full height, a 236kg capacity, 1.85m bucket, maximum height lift of 3.9m and 850lux lighting.

Designed for use with Deere’s 6090M, 6100M and 6120M tractors, this slope loader has features including an automatic implement latch and underslung leveling link.

The latter allows for easier servicing access, more power and increased visibility for the operator. Automatic implement latch means the loader and implements can be installed and detached with a simple and fast ‘click and go’ system.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:59:00 PM

BERENDS

TradeFarmMachinery.com.au 29

The Largest Range of Australian Made Farm Machinery

Australian made aerators using the Shattertine technology.

Great for cracking open hard ground and rejuvenating pastures.

Australia’s No1 locally built mulcher for the last 25 years. Available in Low Body or High Body models in various sizes. Great for clearing up paddocks and bush blocks.

The best value for money Front End Loader mounted post hole digger on the market. Standard with Eurohitch connection with other styles available.

Various augers sizes and types available

Large range of linkage and trailing disc ploughs to suit all tractors and applications.

10 ‘ & 12’ Trailing Grader Blades.

2000kg in weight Best value for money blade of its type

Australian Made slashers with 5 year gearbox warranty. Various sizes and models in single and twin rotor set-up.

Great value and strength.

Also available in galvanised.

Huge range of linkage models available also.

Contact your local Berends dealer for more information or call direct on (03) 9791 2494

www.johnberendsimplements.com.au | sales@johnberends.com.au FFM-FP-5030609-TS-380

AD-591996311.als - Base Edition 29

5/5/21 9:20 am

EVENT NEWS

1

2

3

4

big day out Turfgrowers and forestry workers didn’t miss out at the Diesel Dirt & Turf Expo, with plenty on display at the April event.

Andrew Hobbs was there

M

ore than 90,000 people descended on the Sydney Dragway in mid-April to see some of the latest machinery on offer, with venue management saying it was the largest crowd ever seen at the venue for this type of event.

Known as Australia’s largest construction equipment expo, with more than 200 exhibitors, Diesel Dirt & Turf was also an opportunity for manufacturers of mowers and forestry equipment to display what was new in the market.

Here are some of the highlights.

CLUB CADET PRO Z 972 SDL ZERO TURN MOWER

The Club Cadet Pro Z 972 SDL is engineered to dominate steep hills with a slope of up to 25 degrees.

The Club Cadet Pro Z 972 SDL is engineered to dominate steep hills with a slope of up to 25 degrees – with a new self-levelling air-ride seat that lets the operator adjust its own slope by up to 15 degrees.

Powered by a 35 horsepower (26kW) Kawasaki engine and with a cutting width of 183cm, the mower also comes with fourwheel steering and oversized dual rear wheels to give greater stability and precision. Its single switch electric deck lift also requires less effort to lift or to adjust the deck than the standard foot-operated deck lifts, saving time and money for the operator.

TORO E-SERIES ES3000 BATTERY-POWERED RIDE-ON MOWER Featuring a 72 volt rechargeable battery with up to two hours or

30 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 30

eight square kilometres of run time, the ES3000 mower is built to be hassle-free, with no belts, pulleys, spark plugs or oil.

The E-Seies is designed to be compact, with a 76cm deck and a 46cm turning circle to enable it to fit into tight spaces, and with a tow-hitch to allow optional accessories to be fitted.

Modern comforts include a high back seat, cup holder, cruise control and USB connector, while the mower also offers 10 positions of cutting height, from 2.5–10.5cm.

DIAMOND MOWERS 2134MM SKID STEER ROTARY MOWER Designed to fit on the front of a skid steer, the 2,134mm mower distributed by Colbrook Industries features three hardened steel blades that are built to swing and break away when they come into contact with rocks.

Weighing 921kg and equipped with a flow rating of between 122–155 litres per minute, the mower also comes with a tri-hex mulching disc to provide greater inertia in tough conditions.

Colbrook says the mowers are ideal for large-scale brush and scrub clearing, able to cut trees up to 254mm in diameter and to mulch through saplings, box thorn, gorse and blackberry, among others.

RC MOWERS TK-52XP Powered by a 27hp (20kW) Kawasaki FX850 engine, the remotecontrolled TK-52XP mower can mow on slopes up to a 50

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:59:45 PM

EVENT NEWS

degree angle – managing grass, brush and saplings up to 38mm in diameter.

Able to reach a top speed of 8.5km/h and able to mow roughly one hectare per hour on difficult terrain, the RC mower also features a hydrostatic drivetrain, and low ground pressure – making it perfect for delicate or wet and swampy land.

The microprocessor-based remote control has a 100m range and a fall/drop detector to automatically shut down the mower when signal is lost.

FERRIS SRS Z1 MOWER The 19hp (14kW) Ferris SRS Z1 soft-ride stand-on mower can hit a top speed of 12km/h and has an easy-locking three-position speed control setting, making operations smoother in a range of conditions.

Height of cut can be adjusted from the operator compartment, with the suspension technology on the operator platform and the ergonomically designed thigh pad making for improved operator comfort.

It also has a 22.5-litre fuel tank and commercial Hydro-Gear ZT-3400 Transaxles that are fully serviceable, making it ideal for high performance.

ANTONIO CARRARO MACH 4R The articulated quad-track Mach 4R tractor is fitted with four rubber tracks that guarantee grip and traction, even in muddy or

6

7

8

delicate conditions. The geometry of the steering and the chassis allow tight, fluid turning circles, thus avoiding the pivoting typical of classically tracked vehicles, which damages the soil.

With agility and comfort in line with tyre tractors, the Mach 4R range has been designed for road speeds of up to 40km/h and can come with a variety of optional extras.

FAE SCM/EX/VT DISC STUMP CUTTER The new stump cutter has a flow control system to enable it to attach to excavators of between 14–20 tonnes, with discs and an easy-to-use special wheel to remove tree stumps quickly and easily.

The front hood with hydraulic adjustment and the special front fixed thumb, designed to move the cut material, guarantees very high performance and maximum safety.

FAE also distributes the SCH/GT power take-off-driven stump cutter range for tractors from 130–350hp (97–261kW).

1. A ntonio Carraro Mach 4R 2. Taylor-Dunn Bigfoot burden carrier 3. Club Cadet Pro Z 972 SDL zero turn mower 4. Diamond Mowers 2134mm skid steer rotary mower 5. FAE SCM/EX/VT disc stump cutter 6. Ferris SRS Z1 mower 7. RC Mowers TK-52XP 8. Toro E-Series ES3000 battery-powered ride-on mower

TAYLOR-DUNN BIGFOOT BURDEN CARRIER Now distributed through Toyota Material Handing Australia, the Bigfoot is built to carry heavy loads of up to 1,360kg, both indoors and outside.

With a 348cm turning radius and a maximium speed of 19km/h, the unit has a large operator’s compartment with tilted steering and sliding adjustable seats, which TMHA says increases legroom and reduces operator fatigue.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM2106_398 editorial.indd 31

5

TradeFarmMachinery.com.au 31

6/05/2021 12:59:45 PM

MARKET NEWS

Left: Tractor sales have been strong, but the June 30 end of the Instant Asset Write-Off Scheme could put a dampener on demand

march madness Tractor sales have experienced yet another good month, show figures from the Tractor & Machinery Association

M

Gary Northover is executive director of the Tractor & Machinery Association of Australia (TMA).

He can be contacted on (03) 9813 8011 or at gary@tma.asn.au

arch delivered another stellar month for sales of agricultural tractors, with a 64 per cent rise on the same month last year.

The last 12 months have now seen in excess of 15,000 tractors sold in this country, which is 40 per cent ahead of the previous 12-month period.

A feature of March’s sales was the fact that all reporting categories enjoyed huge rises.

The under 40hp (30kW) range was up 61 per cent for the month to be 68 per cent ahead year to date (YTD). The 40 to 100hp (30–75kw) range was again up a strong 70 per cent in the month (68 per cent YTD) and the 100 to 200hp (75–150kW) category was up 58 per cent (53 per cent YTD).

The large 200hp (150kW) plus range enjoyed another strong rise, up 72 per cent, and is now 92 per cent ahead for the year.

Activity in the month was strong in all states, with New South Wales again the standout; up 98 per cent on the same time last

year and now 105 per cent ahead for the YTD. Victoria reported another solid month, up 47 per cent and now sitting 45 per cent ahead for the year, while Queensland was again up 64 per cent to be 63 per cent up YTD. Western Australian sales picked up 70 per cent to be 72 per cent ahead for the year, sales in South Australia reported a 14 per cent increase for the month and, finally, Tasmania finished the month 65 per cent ahead.

As we have been reporting for some months now, the combination of the federal government’s Instant Asset Write-Off Scheme, along with the outstanding weather conditions, have been driving demand.

Offsetting these positives is the matter of supply. The effects of COVID-19 restrictions in source countries and the lift in demand for machinery worldwide has put strain on local deliveries.

The big question being asked is: “How long can the good times last?”

With the Instant Asset Write-Off Scheme due to expire on June 30, we expect a continuation of the strong demand for machines to remain at least until then.

Beyond this we are anticipating a ‘tapering off’, the depth and duration of which is still largely unknown. That said, the industry remains very healthy.

The order intake season for combine harvesters is now well underway and dealers are reporting increased demand. The past 12-month period has seen sales go past the 650 unit mark, which is up from 530 for the previous 12 months.

Baler sales dipped for the first time in some time but are still up 39 per cent on an annualised basis and sales of out-front mowers also slowed but remain 35 per cent ahead of the same time last year.

PRO SERIES

PRO Z 972 SDL

UNMATCHED HILLSIDE CONFIDENCE

The PRO Z 972 SDL is a dual-wheeled commercial zero-turn engineered to dominate steep hills with slopes of up to 25 degrees.

With its maintenace-free deck, superior cutting performance and self-levelling Air-Ride comfort seat, this best-in-class mower is the ultimate mowing solution for municipalities, commercial operators and large properties with varying terrain.

SEE THE PRO Z 972 SDL AT PRIMEX FIELD DAYS & FARMFEST TOOWOOMBA

BOOK A TEST DRIVE

Today at your local Cub Cadet Dealer. www.cubcadet.com.au

& DAY

*

WARRANTY*

Visit cubcadet.com.au for warranty T’s & C’s.

FFM-HH-5211761-CS-398

32 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 32

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 1:00:01 PM

TradeFarmMachinery.com.au 33

SDLG WHEEL LOADERS

loaded with

features Reliability, versatility & high performance all combine to make the L958F Wheel Loader an excellent choice for Australian operations. Popular in quarries, feedlots, material handling, farm use, waste recycling & general construction, this is an all-round loader that just gets the job done.

L958F

RELIABILITY IN ACTION

162kW Rated Power 17,560kg Operating Weight

Bucket Capacity 3.0m3 Certified ROPS/FOPS Cab Max Dump Height 2,945mm

Rated Load 5,000kg

MEET THE TEAM:

LG936L

LG938L

11,350 kg / 23 HP

10,900 kg / 130 HP

LG946L 13,130 kg / 173 HP

LG978

23,500 kg / 295 HP

WANT TO PUT ONE TO THE TEST? CALL 1300 887 530 FOR A FREE DEMONSTRATION & QUOTE

BIG ENOUGH TO TRUST SMALL ENOUGH TO CARE www.cjd.com.au | 1300 887 530 | enquiries@cjd.com.au Facebook.com/cjdequipment

AD-591996311.als - Base Edition 33

Linkedin.com/company/cjd-equipment

Instagram.com/cjd_equipment

5/5/21 9:20 am

OPINION

horses for courses Rathern than removing fuel rebates, government should charge road users on an individual basis to make it a fairer system

Above: Tailoring charges to drivers’ actual road use will benefit the rural population

Trevor Whittington – CEO WAFarmers

Unfortunately, only around half the revenue raised in fuel excise finds its way back into gravel and bitumen.

34 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 34

I

t must be federal budget time as, yet again, one of the leftleaning economic think tanks has come out with a call to end the diesel fuel ‘subsidy’ to farmers, miners and fishers as a means of repairing the budget and saving the environment.

This year the think tank in question is the Australia Institute, which put out a pre-budget press release titled ‘Australian fossil fuel subsidies hit $10.3bn’, which was quickly followed by another one on the all-important topic ‘How to make the budget less sexist’.

No doubt many farmers will have better things to do than read either paper but the repeated calls to remove the 42.7c rebate and now attempt to link the argument to climate change should concern all farmers.

For those not familiar with the fuel excise debate, here is a brief history of fuel taxes in Australia and a proposal as to how we can once and for all put an end to calls to tax off-road users.

In 1929, a fuel excise was introduced by the federal government with all revenue raised hypothecated (directed) into road programs.

Then, in 1959, under pressure from economists like those at the Australia Institute, the hypothecation of petrol and diesel excises was discontinued on the grounds that the practice of designating the proceeds of a tax to a particular purpose was deemed to be economically unsound from a public finance policy perspective.

In a perfect world all taxes should be paid into one big pool and then competing priorities fight for their share of the pie.

But we don’t live in a perfect world and, in some cases, there is logic in user pays, user benefits.

For example, those who use aeroplanes pay for the cost of the airport, those who use roads pay for the roads and everyone pays for defence because one day we will all benefit from remaining a free country.

Most farmers will be surprised to know that that all the excise dollars raised from on-road fuel usage is not funnelled into the national road network – something that was acknowledged by the respected former National Party leader and minister for transport, John Anderson, many years ago.

“While on the question of changes to petrol and diesel taxes, it is important to point out that the federal government does not consider diesel fuel excise to be a road user charge. Fuel taxes and the revenue they generate have no correlation to the amount of funds provided, whether to the states or nationally,

for roads. Fuel excise today is a source of general revenue just like income and other taxes,” he said.

Arguments for reinstituting hypothecation have been strongly resisted for the past 84 years by economists and a treasury that is always reluctant to tie a tax to a specific expenditure commitment, preferring the confusion of the budget papers to hide where the money comes from or goes to.

The claim is it would be rare if the amount of revenue raised by a particular tax were to equal the desired level of expenditure for which the revenue was earmarked. But that’s not the point, tax payers like to know where their tax money is going and a higher fuel tax would make sense to road users so long as it all goes on roads.

Unfortunately, only around half the revenue raised in fuel excise finds its way back into gravel and bitumen. In 2019-20 excise raised of $11.6 billion saw only $5.6 billion spent on roads.

There is, however, one obvious way to fix this problem, which is to bring back the old hypothecated system of linking road usage to road funding. But, instead of using a fuel tax that fails to cover the incredible cost of traffic congestion and building expensive city freeways, we should be moving to an entirely new system using technology.

What we need to do is follow the advice of Infrastructure Australia and scrap both the excise system and the expensive state-based licence fees (particularly on trucks); and replace them over time (starting with new vehicles) with a direct charging system that reflects each user’s own road use of the network, including the time and distance of travel, congestion levels and the individual characteristics of their vehicle, such as weight and environmental impact.

This would capture the electric vehicles that pay no excise, while leaving the tractors in the paddock free of any road user chargers.

Those that want to use an expensive freeway during peak time will be charged accordingly while those travelling on an empty country gravel road will be at the bottom of the payment scale.

With such a system the government will be literally charging ‘horses for the courses they use’, with the added incentive for governments to build more mobile phone towers to cover regional connectivity gaps to capture addition road usage revenue.

Now this is something the green left economists should be talking about, not attempting to extract funds from exporters to address their progressive priorities.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:51:35 PM

TradeFarmMachinery.com.au 35

AD-591996311.als - Base Edition 35

5/5/21 9:20 am

INDUSTRY NEWS

next generation A Western Australian food producer has been going from strength to strength with a new marketing focus on ‘regenerative agriculture’. Lincoln Bertelli finds out more

Above: Lupin protein is a market that Wide Open Agriculture is looking to expand into Above right: The Dirty Clean Food brand is one that Wide Open Agriculture’s Ben Cole hopes to see in every supermarket

Agriculture is kind of the third leg next to transport and energy in tackling accelerating climate change.

36 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 36

F

rom its home in Williams, part of Western Australia’s Wheatbelt region, Wide Open Agriculture has a vision.

Marketing itself as the state’s “leading regenerative food and farming company”, managing director and co-founder Ben Cole hopes to see the company’s Dirty Clean Food-branded products in the aisles of every supermarket, not only across Australia but in South-East Asia too.

The emerging company has a strong belief in the importance of ethical and sustainable farming and Cole believes this is becoming an industry trend.

“We’re a food and agriculture company that focuses on farming practices that work alongside nature, rather than against them,” he says.

“We focus that food on consumers who are really interested in understanding where their food comes from and the impact it has on the farmland.

“It’s the prevailing largest growing market in the food category across all age groups and all social and economic demographics – people are interested in healthy food and what it does to the farmland and the environment.”

Dirty Clean Food has gained a foothold in the WA market with its products – which include meat, seafood, dairy, fruit and vegetables – being sold in IGA supermarkets and other retailers, served at restaurants and also being available for home delivery.

Its most recent product to hit shelves is oat milk, which launched at the end of 2020.

“It’s going really positively, we’re really happy with the uptake,” Cole says.

“The baristas are responding well to it too. It froths very well and it does all the things a barista needs an oat milk to do and we’re really happy because we think it reflects the unique qualities of Western Australian oats.”

The product on a supermarket shelf might be what is seen by consumers, but the purpose of Wide Open Agriculture is also about a means to an end.

The company’s ambition is to do “positive things for farmers and farmland” and has been the case since Cole founded Wide Open Agriculture alongside Anthony Maslin about seven years ago.

“We knew the Wheatbelt and the south west of WA really well and we felt it would be really exciting to try and build a for-profit, for-purpose business that helped in the regeneration of both the landscape and the communities across the Wheatbelt and the south west,” Cole says.

While not an entirely new concept, the idea of regenerative farming may be a foreign one to some whose farms have been passed down across generations, along with the tried-and-tested practices that accompany it.

In Cole’s words, what is regenerative farming all about and how do farmers benefit from adopting it?

“The term regenerative means very little, but what matters to a farmer are the farming practices, so how are you using that disc seeder and how are you using precision liquids and biologicals to ensure that you’re getting a good soil nutrient balance? How is your rotational grazing system working?” he says.

“Those sorts of questions are now becoming much more relevant than just the term ‘what is regenerative’ versus another form of farming.

“I think a lot of farmers are looking to reclaim their ability to make informed decisions on-farm without necessarily always relying on external expertise.

“I guess I can see the joy coming back into their lives in regards to feeling more in control of their farming system.

“I also believe it is, over the long-term, a much more resilient system.

“Our suppliers and farmers are also really early adopters of new farming machinery and are always pushing the envelope.

“These farmers are regenerative but they’re also absolute early adopters of all things technology, so they’re not afraid of using big gear that’s high-tech that uses the best technology and guidance systems available. They’re actually really proactive on that front.”

It has been a big year for the publicly-listed Wide Open Agriculture. The company’s share price sat at 14c in mid-May last year before rocketing to $1.51 – an increase of more than 1,000 per cent – in just over three months.

Cole believes the COVID-19 pandemic was a major factor in this, with consumer attention turning to the food industry and its sustainability.

“There is no doubt the pandemic has brought a new sort of vigour to consumers’ interest and awareness of both food security – we never thought we’d be lining up to get into supermarkets and have empty shelves – and also just the issues around health and wellness with a global pandemic,” he says.

“I also think something shifted in awareness around climate change and how agriculture is kind of the third leg next to transport and energy in tackling accelerating climate change.”

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 1:00:24 PM

INDUSTRY NEWS

With a big year now behind it and the recently-launched oat milk gradually becoming established, what is Cole’s eventual vision?

“We want to see a Dirty Clean Food product across every aisle in the supermarket so that food and drink consumers can see Dirty Clean Food and feel like it’s a product that they trust and it aligns to their values,” he says.

“We also want to bring new products into offering, so with our lupin protein we would really like to be offering consumers with a whole new form of plantbased protein and with our oat product we’d really like to be offering a new range of oat milk and oat-derived products.”

IN STOCK

Above Left/Above: Wide Open Agriculture managing director and cofounder Ben Cole in the field with Steve Ford, one of Wide Open Agriculture’s farmers

PRESS WHEELS

TYNES

GAUGE WHEELS AND CLOSING WHEELS

DOUBLE DISC

PAYMENT ON DISPATCH For all sales enquiries please contact Bruce on 0427 273 439

P 02 6927 4000 E bruce@rfm.com.au A 81 Wade Street, Coolamon NSW

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM2106_398 editorial.indd 37

TradeFarmMachinery.com.au 37

6/05/2021 1:00:24 PM

FEATURE

Images Jan Glovac

Bucketload of Benz A piece of Australian agricultural history went to auction recently.

Harrison Hunkin reports on a rare chance for buyers to get their hands on a 1925 Benz Sendling

W

hen an extremely rare 1925 Benz-Sendling tractor went up for auction one week before Farms & Farm Machinery hit newsstands, it wasn’t just another antique for sale – it was a slice of Aussie farming history.

It won’t find itself on display at a European museum or end up under covers in an American barn. Instead, it will be staying put in the country it has called home for nearly 100 years in the collection of a lucky Australian.

That’s because the Australian government has determined that this extremely rare piece of machinery is of tremendous significance to Australian agriculture, and therefore must remain here, Down Under.

OLD-TIMER There is certainly interest that is well and truly in excess of the previous auction’s results.

38 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 38

It’s a tractor with one hell of a story, arriving in Western Australia from Germany just in time for the Perth Royal Show back in 1925. It’s believed to have then passed between a few local farmers’ hands before ending up in the possession of the late vintage tractor collector Norm Bates.

It’s safe to say that, when Bates found the machine, it had seen better days. The cam shaft had seized, the fenders, radiator

and the clutch had been removed and the head had been off the tractor for five years. With little to no trade experience it took Bates two years to fully restore the tractor – a decision that proved to be worth the time and effort, with the machine winning the 1986 Best Restored award by the Royal Agricultural Society of Western Australia.

Bates passed away in 2011, aged 86, and his 750-lot strong collection of farm machinery was subsequently put up for auction in 2013. Among the collection was the 1925 BenzSendling tractor, which sold for over $100,000; a price Manheim Auctions was hoping to beat as FFM went to press.

“Based on feedback from some of the potential buyers, there is certainly interest that is well and truly in excess of the previous auction’s results,” says Manheim Auctions business development manager Richard McNicol.

The decision to auction off the Benz-Sendling tractor again comes after the current owners’ near eight-year battle to try and get it back to Germany. However, their attempts were unsuccessful due to the Australia’s Protection of Movable Cultural Heritage Act 1986, which prevents objects of cultural significance to Australia being exported without permission.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:56:58 PM

FEATURE

IMPRESSIVE PEDIGREE Such is the uniqueness of the machine and the historical ties it has to the Mercedes-Benz brand, the auction is also likely to draw more than just tractor enthusiasts.

Why? Because it’s a Benz-Sendling tractor, the joint venture between former German engine-maker Sendling (Motor factory Munich-Sendling) – one of Germany’s first motor factories – and Benz & Cie, the manufacturing company that eventually merged with Daimler to create the iconic Mercedes-Benz we know today. It is also one of the only known tractors of its kind in the world.

If that’s not impressive enough, the Benz-Sendling may have been a changing force in farm machinery as Benz claims that the three-wheeled variant of this machine is the world’s first diesel-powered tractor. Shortly after, Benz-Sendling developed the four-wheeled variant we see here – a machine that inspired the more conventional-looking tractor that we’ve come to know.

Spec-wise the Benz-Sendling pushes out an approximate 30– 34 horsepower (22–25kW) at 800rpm from its aluminium engine block. It has cast iron dry liners, cast iron pistons, a three-speed gearbox and a sprung front axle and a diff lock; impressive

considering its age. McNicol, who is also acting as the item’s auctioneer, says he hasn’t come across anything quite like it.

“I’ve come across some old dozers before, and again that really opened my eyes, but I wasn’t even aware that people collected these sorts of things and love all of their little secret treasure troves.”

So, the potential buyer is looking at a piece of automotive history? McNicol thinks so.

“We have appealed to various market segments.

Those that are engine collectors, those that are curious about Mercedes-Benz, as well as your traditional tractor enthusiast. It has certainly appealed to a broader market that’s for sure,” he says.

“It’s a piece of history, the fact it has survived so long and has been so well looked after is incredible.”

“It’s an honour to sell something so old. It’s not every day that you get to see these types of machines come up for auction and, so far, the interest in the tractor has been energetic.”

The online auction ran May 14–20, 2021.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM2106_398 editorial.indd 39

Above: This Benz-Sendling tractor is a rare example of a joint venture between two German manufacturers – Sendling and Benz & Cle – before being shipped to Australia in 1925

TradeFarmMachinery.com.au 39

6/05/2021 12:57:12 PM

FEATURE

1

sweet legacy The sugar cane harvester factory officially closed 17 years ago, but for those that remember Toft Bros, it’s a memory worth preserving. Anthony Wingard reports

1. T he Toft Robot 364 Mk2 chopper harvester 2. Toft Bros was a world leader in sugar cane equipment 3. In its heyday, Toft Bros’ Bundaberg factory employed hundreds of locals and sent machinery around the world

They started a revolution.

Instead of having a chain driver, you had a hydraulic tube with oil in it running a motor.

40 TradeFarmMachinery.com.au

FFM2106_398.indd 40

F

2

3

or the many who loved the Toft name, 2004 was the end of the affair.

For decades, Toft Bros was the undisputed king of the sugar cane world and its hometown of Bundaberg was the global epicentre of the cane harvester manufacturing trade.

Nowadays, if one hadn’t lived through the zenith of the Toft years, it’s hard to fathom just how big Toft Bros was, especially considering its rise from the banks of the Burnett River to become one of the world’s leading manufacturers.

Many hailed the Toft brothers – Colin and Harold – as revolutionaries. Others hailed them as geniuses.

“No single family made a bigger contribution to cane harvesting than the Tofts of Bundaberg,” says Bill Kerr, author of They’re all Half Crazy: 100 Years of Mechanical Cane Harvesting.

The sentiments for the Toft family and its brand of cane harvesters and loaders were generous, but those within the industry knew they carried significant truth.

After all, as one newspaper headline from 1970 put it: “Toft Brothers Industries in Bundaberg can rightly claim to be the world leaders in the field of full track high flotation cane harvesters and transporters.”

The esteem in which Toft Bros was held, both across the industry and within its local community, meant the closure of the plant was a bitter pill to swallow for those who had witnessed the rise of a local brand that catapulted the rum city into public discourse around the world.

But, as sugar prices plummeted at the turn of the millennium – they almost halved between 1997 and 2002 – Toft’s parent company CNH Industrial uprooted the manufacturing plant, relocating its operations to Brazil and causing mass layoffs for staff at the Bundaberg factory.

It has now been just over 17 years since the Bundaberg factory closed its doors; yet the influence of the Tofts remains, not only in the region but in the sugar cane industry in Australia and across the world.

Tony McGarry, treasurer of the Rum City Vintage Machinery Club, who also worked for the Tofts on the factory floor at Avoca Road, says the influence of the Tofts in the Bundaberg region is paramount.

“They created so much equipment that supported the cane industry in Bundaberg,” says McGarry.

“That’s why the Tofts were so important.”

“It meant a lot to the family too because, besides the part of the family which were involved in the harvesting part of it, there were other [Toft] brothers who were involved in farming and other parts of Bundaberg.

“It was quite a large family all they all had something to contribute to the sugar cane industry.”

As the final harvester rolled off the floor of the last Australian manufacturer of cane harvesters, one Toft representative put it very simply: “It’s really gut-wrenching stuff.”

TRAILBLAZERS To illustrate the story of the Tofts is to describe a pair of trailblazers who lived out the Australian dream. Colin and Harold were the youngest of a large and poor family, raised in Bundaberg during the great depression where they worked cutting sugar cane by hand six days a week.

Their first machine, which they built in 1940, was a cable loader fashioned from scrap metal and an old Model T Ford, which was put together to help pick up harvested cane bundles in their own paddock.

Their early success led to the Queensland Cane Growers Council commissioning the brothers to develop cane harvesting further, with its general secretary, Ronald Muir, saying: “These people have definitely solved the mechanical harvesting of straight cane.”

What followed over the ensuring years was a series of consecutive and calculated machines that propelled the Tofts to the mainstream after Harold and Colin formally established the Toft Bros partnership in 1947.

The Tofts set themselves apart in the scramble to mechanise cane harvesting through their use of hydraulics – the first of which was their hydraulic loader in 1956; developed through Harold’s willingness to push the conventional thinking of that period.

With just one person operating the loader (opposed to three in their initial cable loader), the Tofts were efficient in the field and the only manufacturer who had successfully used hydraulics.

As they continued to develop their hydraulics, Harold – the brains behind the machines, and Colin – the marketing guru, soon realised the future of cane harvesting was with chopper harvesters.

McGarry says the Toft name really took off following the release of its first hydraulic chopper harvester.

“When Toft started to get into the chopper harvester business, they said ‘no, not this chain business, we’ll use hydraulics’,” says McGarry.

“They started a revolution. Instead of having a chain driver, you had a hydraulic tube with oil in it running a motor and that really made the cane harvester business go on.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 2:03:02 PM

TradeFarmMachinery.com.au 41

‘MIX IT UP’ WITH PRECISION. Accurate mixing is imperative to achieve quality results from your feed. Quality built and packed with features, there’s plenty of reasons why you’ll see an Abbey on a feed pad near you.

BUILT WITH SUPERIOR CONSTRUCTION AND DESIGN. A 20mm base plate, 15mm auger and SOM planetary transmissions provide strength and product longevity.

Each model produces an excellent quality of mix for all varieties of materials.

•

Digi Star electronic weighing system

•

8mm hardox rolled wall

•

4 weigh bars for consistent and

•

Large adjustable counter knives

accurate weighing

•

2 speed gearbox (twin auger model

•

Side or front door discharge options

only)

•

Single or tandem axle options, both

•

Independent chassis

•

Heavy 3 stage jack

•

Wide angle driveshaft

•

PVC elevator

•

Hydraulic brakes

•

Hydraulic/electric controls of all functions

with 435/50R19.5 wheels •

3-year gearbox warranty

CALL FARMGARD 24 HOURS

FIND OUT MORE AT

Nationwide Dealer

35 years, Generations of

1800 FARMGARD

farmgard.com.au

Service Network

Experience

AD-591996311.als - Base Edition 41

5/5/21 9:46 am

FEATURE

4

5

6 4. B uilt in 1970, this chopper harvester will be restored to its full glory

“I think they could see there was a need for modernisation in the equipment that was currently available.”

5. An important piece of Australian farming history, the chopper will be once again put back in the field to demonstrate its operation

BOOM TIMES

6. Plans are to restore this Robot 364 Mk2 once a permanent home is found for it

We want to demonstrate how it cuts some sugar

At Toft Bros’ peak in the 1960s and 1970s, there was genuinely no one bigger in the sugar cane realm.

Following the development of its chopper harvester, the first of which – the CH200 – debuted in1968, Toft Brothers Ltd exploded and soon occupied as much as 90 per cent of the world’s market for chopper harvesters.

Its sales boomed from $1.66 million in 1970 to $18.5 million in 1975 and such was the demand for Toft product that employee numbers grew from 112 to 759 at the Bundaberg factory.

Bundaberg’s own had gone global.

Toft exported harvesters to every continent on the globe (except Antarctica) and held a client base hailing from over 30 different countries; ranging from Senegal and Angola on Africa’s western coast to Iran and Iraq in the Middle East, and a who’s who of sugar-growing nations across the Americas.

Much of the success of the Toft machines was underpinned by their performance across the planet’s varying ecosystems and weather patterns – something that had long been an issue for harvester manufacturers.

Such was the success across different conditions that two of Toft Bros’ biggest clients were an Iranian government organisation, which ordered US$17 million of harvesters in 1973, and Talisman Sugar Corporation, which used 23 Toft CH464 harvesters to cut over one million tonnes of cane across 1972–1973 in central Florida.

The legacy of Toft had been cemented, especially following the launch of the 1000 series, which helped propel the brand even further into the consciousness of cane farmers.

In all, more than 3,550 of the 6000 and 7000 series machines were exported from the Bundaberg assembly line in the late 1970s to other sugar producing countries around the world – all built by the Toft Bros’ more than 760 employees – many of whom worked overtime to meet the full order book.

However, the declining sugar market around the world in the 1980s meant that Toft Bros bounced around a handful of foreign owners before the company was floated on the stock exchange in 1993, when it was purchased by Case IH (CNH Industrial).

cane in the field. That’s

RESTORATION

the objective.

Today, the Toft legacy remains; perhaps nowhere more so than in Bundaberg where many still harbour a spirited nostalgia for the brothers and their global empire.

42 TradeFarmMachinery.com.au

FFM2106_398.indd 42

A few Toft machines of the 1960s and 1970s may still be operating around Australia, and the world, on smaller farming operations, however many have now found their place as restoration projects or in museums.

Such is the case with McGarry and the team at the Rum City Vintage Machinery Club, who were donated a Toft Robot 364 Mk2 chopper harvester – a machine first released in 1970 when Colin and Harold’s company was truly at its peak.

The harvester was donated by Rocky Lerch in 2018, having been used by just two previous owners, Lerch and Bundesen Bros, since it first entered the fields over half a century ago.

“The plan is to restore it,” says McGarry.

“We’ll repaint it all, cut away some rust, replace a few hoses on it and reseal a few leaks here and there. But we want to restore it back to a good condition.

“We want to demonstrate how it cuts some sugar cane in the field. That’s the objective.”

Currently, restoration of the 364 Mk2 remains dormant as the club seeks out a permanent building for the machine where it can house it and get more serious about the restoration.

Ideally, McGarry hopes to restore it to a near-original condition where it can be displayed as a museum piece, but not before it takes a few more trips to the field.

As for the brand, it lives on under CNH Industrial – with the company’s AusToft harvesters marque celebrating its 75th anniversary in 2019.

But for many, Toft Bros came to an end when the Bundaberg factory closed in 2004. For them, the Brazilian-made machines simply are not the same “Especially initially, the Brazilian AusTofts weren’t quite as good as the [Bundaberg made] Toft machines,” says McGarry.

“Customer reviews of the machines meant CNH Industrial listened to the farmers and they made changes and upgraded the machines.”

Once a world leader and integral part of Australia’s agriculture DNA, the Toft name instead lives on through people like McGarry who remember its importance in the cane industry, who experienced the loaders and harvesters in the field throughout the 20th century and who continue to preserve its legacy through the admiration and restoration of the old yellow Toft machines.

Australia, after all, was the first country in the world to convert entirely to mechanical cane harvesting – a feat that seems impossible without the genius of Harold and Colin Toft.

As Colin said when awarded the Order of the British Empire (OBE) in 1989: “Not bad for a farmer boy.”

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 2:03:02 PM

TradeFarmMachinery.com.au 43

02 4423 3499

After Hours 0429 233 577 sales@elgra.com.au www.elgra.com.au 21 Central Ave, South Nowra, NSW, 2541

HYDRAULIC PERCUSSION POST DRIVERS FOR TRACTOR, SKIDSTEER & FEL PDX Series

(Paddle)

2 Sizes available, Suit Skid Steer, Excavator, 3PL, FE

From

$7,920 + GST 89 Series Driver

From 2 FREE AUGERS

$8,310 + GST

WITH ANY POST DRIVER SOLD IN MAY 2021

90 Series Driver Designed specifically for Skid Steer, Excavator, FEL or any wheeled loader. 4 Cell Options.

Available in 2.5 (Standard) & 3.6 (Hi Lift) under the Anvil, 4 Cell Options From

From

$16,230 + GST

From

FFM-FP-5034644-TS-392

Cement Mixer

4 Cell Options, Suit Skid Steer, Excavator, FEL or any wheeled loader.

$13,990 + GST

Australia’s most POWERFUL & VERSATILE Percussion Driver ***All El-Gra Post Drivers comply with Work Cover and other State laws.***

AD-591996311.als - Base Edition 43

5/5/21 9:46 am

EOFY

a new deal Commodity prices are high and equipment is in hot demand – but 2021–22 will hold a series of new challenges for farms and agribusinesses, Andrew Hobbs writes

Top: The government’s Instant Asset Write-off Scheme was a significant factor in the machinery sales boom seen this year Inset: Commonwealth Bank’s executive general manager of regional and agribusiness, Grant Cairns

Grain producers will need to think carefully about their strategies in everything from grain storage to planting to equipment purchasing.

I

t goes without saying that inconvenient timing was a hallmark of the 2020–21 financial year, and the print deadline of Farms & Farm Machinery is sadly no exception.

Between the time this article is sent to the printers and when it reaches our audience, treasurer Josh Frydenberg will have released the Commonwealth Budget for 2021-22 – widely expected to be his last before the Morrison government faces an election predicted to take place next year.

There’s something of an irony in the fact that it was an announcement in last year’s budget that had such a big impact on this financial year’s accounting.

That was, of course, the announcement of the Instant Asset Write-Off Scheme – a generous tax write-off that enables businesses with a turnover of less than $500 million to count the costs of buying and repairing depreciable assets as a tax expense up until June 30, 2021 – as long as they were purchased before December 31, 2020.

The write-off was originally only for assets valued at under $30,000; but this was extended to $150,000 in March 2020, just as the first impacts of COVID-19 were being felt nation-wide.

The government also allowed a deduction for the business portion of the costs of some depreciating assets from early October 2020 through to June 30, 2022 – with no upper limit in place.

As the Tractor and Machinery Association reflects on page 32, this change in policy, combined with a strong production year in 2020 for many Australian farmers, has led to a boom in equipment and machinery sales.

But, as the effects of COVID-19 continue, this boom in demand has been exacerbated by constraints of supply of new stock and spare parts, as supply chains struggle with new quarantining requirements brought on during the pandemic.

And the effects of this are now being felt by the banks, with new data from the Commonwealth Bank showing that asset financing for equipment and machinery in agriculture is currently sitting at a seven year high.

Commonwealth Bank’s executive general manager of regional and agribusiness, Grant Cairns, says the funding increase is being driven by farmers investing in transport equipment, sowing and cropping equipment, tractors and harvesters.

“As farmers prepare for what is expected to be a significant winter crop production, upgrading old machinery has become a priority, with customers seeking to maximise productivity and take advantage of current government investment incentives,” he says.

According to the Bank’s data, March 2021 was the third largest month for purchases of agriculture machinery since 2014.

Tractor purchases are up 78 per cent and harvesters up 88 per cent, compared to the same time last year.

Farmers in Western Australia have led the demand with new machinery purchases up 83 per cent, followed by Queensland

up 47 per cent, and NSW up 30 per cent compared to the same time last year.

Cairns says that purchases of cattle stock crates are also significantly higher than last year, following recent rainfall in pastoral regions.

“While it has taken some time, Australia’s herd rebuild is firmly underway, and that’s helping prices due to high demand and ongoing competition between farmers and processors,” he says.

WHAT COMES NEXT Early indications for the first half of 2021–22 look promising for the agricultural sector, with the Bureau of Meteorology predicting a 60 per cent chance of above average rainfall for much of southern Australia.

On top of this, ANZ forecasts that a record Australian wheat crop, combined with good soil moisture, has put crop producers in a strong position – with demand likely to be high going into the future.

Mark Bennett, ANZ’s head of agribusiness and specialised commercial, says that the new challenge for Australia’s agricultural sector will be evaluating its medium- to long-term business strategies.

“When you invest for a generation and beyond, it’s critical to have a view of where you are in a cycle at any point in time,” he wrote in ANZ’s Commodity Insights – April 2021.

“If, for example, you believe the industry is near the peak of a cycle, not just in terms of prices and production, but in terms of favourable interest rates, it might indicate whether growth or consolidation is the imperative.”

With agricultural commodities at a significant high right now as the world recovers from the COVID-19 pandemic, it is only likely they will start returning to more “normal” levels in the future.

“In particular, assuming a return to average seasonal conditions, the decline in wheat yields and acreage from the coming year is forecast to see Australian wheat production levels fall by around one-third over the next five years,” he writes.

“Based on this outlook, and with their experience of volatile seasons, grain producers will need to think carefully about their strategies in everything from grain storage to planting to equipment purchasing.

“And all farmers will continue to balance their own strategies of building wealth through capital gains and profits driven by operating margins; an issue especially top of mind given the recent and current strength of the rural property market.

“Times are definitely good and will continue to be good for many. The best agri businesses will be those that take opportunities appropriate for them and their business model while carrying a healthy degree of caution, realism – and an escape plan – for when something goes wrong.”

J D D

P

J

A

$

Th w

Pu Th

To to

*T fact

44 TradeFarmMachinery.com.au

FFM2106_398 Editorial.indd 44

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 5:20:50 PM

EOFY

green acres The value of Australian farmland surged last year due in part to high commodity prices and low interest rates

F

armland prices increased in every Australian state and territory last year, despite the COVID-19 pandemic.

Rural Bank’s Australian Farmland Values annual report, which is based on sales data collected by government agencies in each state and territory, found there was a national median price increase of 12.9 per cent per hectare during 2020.

Australia’s median price of farmland is now $5,907 per hectare and this has increased for seven years in a row.

Northern Territory had the biggest price increase of 65.2 per cent last year, albeit from Australia’s smallest base of sales, which actually declined in number compared to 2019.

Tasmania had the next biggest farmland price increase with 25.3 per cent, ahead of Western Australia (19.3 per cent), New South Wales (15.6 per cent), Queensland (11.8 per cent), South Australia (10.9 per cent) and Victoria (6.9 per cent).

Only three states recorded growth in transaction numbers, however as they were the three most populated states – New South Wales, Victoria and Queensland – they contributed to an overall national transaction increase of 14.5 per cent.

Dean Lalor from Rural Bank Launceston believes strong commodity prices and low interest rates have increased confidence in the rural property market in Tasmania.

“The value of high surety irrigation land was recognised by buyers in the Northern and North West regions of the state,” he says.

“This led to a scenario whereby demand outstripped supply causing the value of farmland in these regions to increase sharply.

“Across the state, most properties were sold via a tender process or auction, resulting in a higher level of commitment from buyers to secure properties compared to previous years.”

The report also analysed data within regions of each state and it found Western Queensland was one of the best performed areas for price growth.

“In the west of the state, exclusion fencing continued to provide grazing options, drastically altering the productive capacity of the land and the value prospective buyers were willing to place on it,” says Andrew Smith from Rural Bank Eastern Australia.

“Grazing regions benefitted from strong cattle prices and eventual rainfall offering vendors a chance to sell well presented properties to confident buyers.”

The report found there were 8,187 farmland transactions in Australia last year with 8.2 million hectares of land changing hands at a total combined value of about $10 billion.

Above: Farmland prices increased across Australia last year

JCB SERIES 5 FASTRAC DISCOVER THE DIFFERENCE

PURCHASE A

JCB 8330 FASTRAC

AND RECEIVE A

$5K

FACTORY * BONUS!

+

A FREE SERVICE KIT FOR FIRST 1500 HOURS SERVICE*

HURRY! VALID UNTIL 30/06/2021

The latest enhancements to the Fastrac ensure it is the largest and most powerful JCB tractor yet. Faster, more comfortable, extremely versatile and fitted with more safety features than any other tractor in its class, the Fastrac 8330 guarantees operators can get more done in a day than ever before.

FFM-HH-5011106-CS-398

Purchase your new JCB Fastrac 8330 before 30th June 2021 and receive a $5,000 factory bonus* PLUS a free service kit for the first 1500 hours service*.

There has never been a better time to secure your new JCB Fastrac, contact your local JCB CEA dealer today!

To take advantage of this great offer contact your local dealer today 1300 522 232 www.jcbcea.com.au * Terms and Conditions: Offer available on JCB Fastrac 8330’s through participating JCB Dealerships until 30th June 2021 or while stocks last. $5,000 factory bonus cannot be exchanged for cash.1500-hour service kit includes all parts and lubricants. Labour and travel are not included.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM2106_398 Editorial.indd 45

TradeFarmMachinery.com.au 45

6/05/2021 3:11:15 PM

Powered by

RESEARCH • COMPARE • BUY • SELL

AUSTRALIA’S #1 FARM MACHINERY MARKETPLACE*

BUY

More than 40,000 tractors, spreaders, harvesters, hay tools, feeders, sprayers, trailers, and attachments, and other parts and accessories currently listed for sale

SELL

Unlimited stock listings on TradeFarmMachinery.com.au for just $360 per month

4/3/20, 2:48 pm Page 1 of 1

BAUER TRADER MEDIA

SEARCH 4/3/20, 2:48 pm Page 1 of 1

NEW AND USED TRACTORS FOR SALE IN AUSTRALIA BAUER TRADER MEDIA Find new and used Tractors for sale with Farms & Farm Machinery magazine

SEARCH

NEXT

Page 1 of 188 (1,875 results) Premium Ads NEW AND USED TRACTORS FOR SALE INlist AUSTRALIA Sort by

map

GET Find new and used Tractors for sale ALERTS with Farms & Farm Machinery magazine

CASE IH MAXXFARM 25 TRACTORNEXT $19,750 Page 1 of 188 (1,875 results) Sort by

list

Premium Ads

map

GET ALERTS

CASE IH MAXXFARM 25 TRACTOR $19,750

Tractors / Tractors / 0-40hp RefCode: TA978637 Class: 0-40hp Drive Type: 4WD FEL: YES Rated Engine Power - hp: 28 4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380 hours indicated, with books, approximately 28 horsepower, AS NEW *price includes gst

www.TradeFarmMachinery.com.au

Mclaren Vale, SA

!

Tractors / Tractors / 0-40hp

CALL 08 7007 6847

RefCode: TA978637 Class: 0-40hp Drive Type: 4WD FEL: YES Rated EngineSAVE Power -ITEM hp: 28 4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380 hours indicated, with books, approximately 28 horsepower, AS NEW *price EMAIL SELLER includes gst

Mclaren Vale, SA

KUBOTA 8540 ! CALL 08 7007 6847 $22,000

* Based on stock items for sale as at March 2020 SAVE ITEM

EMAIL SELLER

KUBOTA 8540 $22,000

Tractors / Tractors / 40-100hp RefCode: TA994405 Class: 40-100hp Drive Type: FWA Number Cylinders/cc: 4 Rated Engine Power - hp: 85 Usage Hours: 5,800 Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives very well. Xgoverment . Inspection most welcome

Stonyford, VIC

Tractors / Tractors / 40-100hp

! CALL 03 8547 8644

RefCode: TA994405 Class: 40-100hp Drive Type: FWA Number Cylinders/cc: 4 Rated Engine Power - hp: 85 SAVE ITEM Usage Hours: 5,800 Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives very well. Xgoverment . Inspection most welcome

EMAIL SELLER

Stonyford, VIC

KUBOTA L1-24DT TRACTOR WITH 4 IN 1 ! CALL 03 8547 8644 FEL 28HP $21,450 SAVE ITEM

EMAIL SELLER

KUBOTA L1-24DT TRACTOR WITH 4 IN 1 FEL 28HP $21,450

Untitled-2 1

Tractors / Tractors / 0-40hp RefCode: TA757218 Class: 0-40hp Drive Type: 4WD FEL: YES Number Cylinders/cc: 3/1462cc Rated Engine Power - hp: 28 KUBOTA L1-24DT - 28hp 4WD DIESEL. The Kubota L1-24DT offers quality Japanese small tractor engineering. Its smooth, direct injection diesel engine is coupled with a higher specification shuttle shift transmission. With forward and reverse at your fingertips, this machine is the front end loader specialist.

Emu Plains, NSW

6/05/2021 3:44:45 PM

TradeFarmMachinery.com.au 47

11

WE CAN HELP YOU MAKE THE MOST OF EVERY ONE. Whatever you are doing on your small slice of Australia, you’ll never regret investing in a John Deere Lifestyle Tractor to help you do it.

With a range of models to choose from and loads of attachments, there’s one with your name on it.

0.95

% P.A. *

COMPARISON RATE ON ALL

LIFESTYLE TRACTORS 25% DEPOSIT, 36 MONTH TERM

And we’re here to help choose the perfect one for you. Find yours at JohnDeere.com.au/lifestyle

*Conditions apply. Finance available through John Deere Financial Limited (Australian Credit Licence 391484) to approved consumer applicants only. Annual percentage rate based on a 25% deposit and 36 month term. Fees and charges apply. If not amended or withdrawn earlier, the promotion expires on 09/07/2021. The comparison rate in this advertisement is for the Secured Consumer Loan product and is on the basis that $30,000 is borrowed over a term of 60 months.WARNING: The comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.

TRACTA_J63865_AU_LifestyleTractors_FFM

FFM 398 41-67.indd 47

5/5/21 10:01 am

SPONSORED CONTENT

productivity boost JCB says the latest improvements to its Fastrac 8330 tractor ensure the new model is its largest and most powerful

Above: Upgrades to the Fastrac 8330 include Advanced Suspension, a boost to weight carrying capacity, increased hydraulic options and an upgraded drawbar

There is also the option to include a road performance package that provides further traction control.

48 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 48

F

aster, more comfortable, extremely versatile and fitted with more safety features than any other tractor in its class, the Fastrac 8330 guarantees operators can get more done in a day than ever before, says JCB. With faster road and in-field speeds, a top speed of 70km/h plus unique all-round suspension, the Fastrac 8330 provides greater speed, comfort, productivity, versatility and safety features than any other tractor, it adds.

The Fastrac 8330’s engine combines powertrain and suspension systems to deliver the ultimate in power, torque and traction – making the difference in any situation.

The performance-proven 8.4-litre, six-cylinder engine delivers up to 348 horsepower (260kW) with twin turbocharger installation giving sharp responses and high torque ratings across a wide range of engine speeds. The CVT transmission with improved cruise control functions also ensures optimum use of power and torque.

When on the road, the Fastrac 8330’s steering is precise and well weighted, providing the ultimate control when travelling at 70km/h.

The addition of the Rapid Steer option reduces the lock-to-lock turn of the steering wheel by 50 per cent and makes headland and other field manoeuvres quick and easy.

There is also the option to include a road performance package that provides further traction control and a hill hold feature, which is unique to JCB. Another exceptional feature of the Fastrac 8330 is its external brakes; fitted to both axles it allows the tractor to consistently stop up to 15 per cent quicker than other conventional tractors.

The hydrostatic dual steering system significantly reduces operator effort while meeting the exceptional safety standards for high-speed tractors (greater than 60km/h).

The advanced anti-lock system (ABS) retains stability and steering while optimising braking performance on the road, along dirt tracks and in the field.

As an added safety feature, the Fastrac’s failsafe set-up ensures the brakes are applied in the event of a loss of pressure.

A transmission disc park brake holds the tractor securely and applies air brakes on a trailer, tanker or spreader.

The Fastrac 8330’s advanced suspension quickly responds to changing loads applied by front and rear mounted implements helping to distribute the load evenly across the machine.

With near 50:50 weight distribution, the traction benefits from

suspension on both axles and is ideal for heavy draft work.

Rough terrain is also no deterrent to Fastrac operators with the all-round suspension and a high-spec air seat ensuring a smooth ride for baling, spreading and spraying operations, increasing operator comfort for maximum productivity. The heavy-duty axles can also be used at 3m track width for controlled traffic and row crop applications.

The purpose-designed chassis makes the difference when it comes to greater implement mounting versatility, while the powerful hydraulics meet the demands of implements through five rear double acting electric spool valves and a Power Beyond hydraulic connection.

The Fastrac’s powerful Category III rear hitch lifts a genuine 10,000kg to handle large capacity 3PL spreaders, ploughs, cultivators and mounted drills, while sensitive electronic draft control helps it maintain traction under a heavy load.

For added productivity operators can also use the optional Category 3N front hitch with 3,500kg capacity, external lift/lower control and optional power and lighting sockets.

The optional rear deck mounted 900kg or 1,600kg ballast weights provide additional traction. This load is suspended, providing additional comfort over wheel weight systems.

The rear deck weights are also quick and easy to fit/remove, encouraging correct and efficient use of ballast.

The in-cab technology featured in the Fastrac 8330 delivers high levels of tractor and implement control through a simple, easy-to-use interface.

Showcasing large icons, it features an easy-to-use touchscreen terminal with intuitive navigation that allows operators to easily adjust functions and settings to suit the desired requirements.

Operators can also create and save up to five sequences, with up to 15 steps each, in the headland turn assist section to minimise control workload at the end of each run across a field, and four configurable joystick buttons can also be assigned a wide range of functionality.

Factory-fit GPS solutions are available as well as compatibility with a wide range of third party systems. For spraying and spreading applications, the Fastrac can minimise overlap at speeds of up to 40km/h.

To find out more about the new JCB Fastrac 8330, with advanced suspension speak to your JCB CEA dealer today.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:50:34 PM

SAVE! BIG OPENINGS

ONLY

$37,810 INC GST

WITH OUR END OF FINANCIAL YEAR SALE

STRICTLY LIMITED NUMBERS | ABN HOLDERS ONLY

SOLID DOUBLE

ONLY

15M x 27M x 5.1M (50’ x 90’ x 17’) Strong and functional. Extend to 18M (60’) wide for $7,880.

TradeFarmMachinery.com.au 49

$19,360 INC GST

ULTIMATE VALUE

ONLY

$13,650 INC GST

10M x 13.5M x 5.1M (33’ x 45’ x 17’) Open both 10M ends, perfect for hay, machinery or workshop. Add an extra bay for $3,560.

$62,970 INC GST

INC GST

9M x 30M x 5M (30’ x 100’ x 16’8”) Three sided protection with four 6M open bays plus a fully enclosed and lockable 6M bay. 13M (43’) wide version $39,900 or 15M (50’) wide version $45,650.

15M x 18M x 5.1M (50’ x 60’ x 17’) Strong, robust and extendable. Open both ends. Add an extra bay for $4,940.

GET TO KNOW US...

Now Buildings was established to provide farmers and small businesses with higher quality sheds at low wholesale prices.

20M x 40.5M x 5.4M (66’ x 135’ x 17’7”) Outstanding access at both ends. The drive-thru convenience of this shed makes it excellent for large machinery or storage.

EASY ACCESS

HIGH & MIGHTY

ONLY

$30,350 INC GST

We had seen what was on the market and we knew we could do better, in both quality and price. We are 100% Australian, use 100% BlueScope steel and specialise in large rural & industrial sheds.

Now Buildings has been in action for 13 years and has 40 years combined industry experience. Our company is now turning over more than $20 million per year. This kind of turnover means we have massive buying power on a smart range of buildings. To maintain this type of buying power and achieve huge savings for our customers, we deal only with ABN holders. We also don’t produce small or complex sheds as this would take away from our buying power.

As an Australian family business, we are committed to using only Australian steel. Our sheds are manufactured in every state, which creates jobs locally and contributes to both the local & national economy.

ONLY

$22,590

9M x 24M x 5M (30’ x 80’ x 16’8”) Four large 6M bays to suit all storage needs.

Extend to 13M (43’) wide for an extra $6,660.

5.7M (19’) high version $24,300.

INC GST

SAVE TAX!

ULTIMATE FARM HAY SHED

18M x 18M x 7M (60’ x 60’ x 23’) Excellent shed for tall machinery or stacking hay. Open both ends.

27M (90’) long version $43,430.

We are very honoured to have thousands of loyal and happy customers across the states, without their referrals or return business, we wouldn’t be the company we are today.

WITH THE INSTANT ASSET WRITE OFF*

TOUGH TRIPLE

ONLY

$14,430 INC GST

TOUGH DOUBLE PLUS

ONLY

$27,190 INC GST

ONLY SECURE INDUSTRIAL $38,330 INC GST

Full Colorbond included

ONLY

$52,960

15M x 40M x 5.1M (50’ x 131’ x 17’) Organise your storage with five 8M bays, perfect for hay and machinery! Building in Zincalume. Colorbond available for an extra cost.

INC GST

AUSSIE LEGEND

ONLY

$31,090

BEAT THE LATEST BLUESCOPE PRICE RISE OF UP TO 6.5%

ENORMOUS ACCESS

ONLY

INC GST

OPEN & SECURE

Includes a roller door and PA door

9M x 18M x 5M (30’ x 60’ x 16’8”) Two 9M bays gives you easy storage and great three-sided protection. Perfect for vehicles, machinery or hay. Building in Zincalume. Colorbond extra.

SAVE AGAIN!

HAY MATE

ONLY

$21,840

ONLY

$24,440 INC GST

13M x 22.5M x 5M (43’ x 75’ x 16’8”) Open in the gable ends for taller machinery or more hay. Add an extra bay for $4,380.

9M x 15M x 4.5M (30’ x 50’ x 15’) Open front shed in large 5M bays for better storage. Skylights extra.

VERSATILE EXTENDABLE

ONLY

$26,770 INC GST

15M x 18M x 4.5M (50’ x 60’ x 15’) Two 9M open bays. Great space for storage, protection and access.

Increase height to 5.1M (17’) for $460.

EASY STORAGE

15M x 22.5M x 5.1M (50’ x 75’ x 17’) You can extend with length or lean-tos or even join another shed. Add an extra bay for $4,640 or a lean-to (6M x 22.5M) for $7,970. 5.6M (18’3”) high version $28,500.

ONLY

$25,470 INC GST

10M x 18M x 5.1M (33’ x 60’ x 17’) Fully enclosed industrial shed to keep your items safe and secure. Includes a 4.2M H x 4.3M roller door and PA door.

Zinc building. Colorbond extra.

13M x 24M x 5.1M (43’ x 80’ x 17’) Perfect shed for securing large machinery or vehicles. Includes a 5M H x 4.3M roller door, a second 4.2M H x 3.4M roller door and PA door.

AWESOME VALUE ULTRA

ONLY

$39,850 INC GST

18M x 27M x 5.7M (60’ x 90’ x 19’) A great shed for tall machinery or storage with easy access from both ends.

MANUFACTURING HIGH GRADE SHEDS IN QLD, NSW, VIC, SA, WA & TAS 100% Australian steel, 100% Australian made, 100% Australian family owned High tensile bolts & class 4 fasteners, gutters & downpipes included Site specific engineering, heavy duty connection & footing design High grade industrial strength materials and design

CALL MON–SAT 1300 559 668

JAMES 0413 104 820

WWW.NOWBUILDINGS.COM.AU

JOHN 0437 699 111

TREVOR 0431 597 160

FFM-FP-5195894-CS-398

THE NOW BUILDINGS ADVANTAGE

Images are from the Now Buildings range, for illustration purposes only. Imperial measurements are approximate. Shed price only. WA & NT slightly extra. Prices are based on collection, delivery extra.

Extras pricing in bold is applicable at the shed purchase stage only. Extensions for existing sheds POA. Now Buildings will not be responsible to honour these prices once the total allocation has been sold. E&OE. Prices are Region A, Terrain cat. 2. Reg B slightly extra. *Now Buildings is not providing any financial or taxation advice, you should consult your own advisors before entering any transaction.

AD-591996311.als - Base Edition 49

5/5/21 9:46 am

SPONSORED CONTENT

1

2

3

fencing focus Building on generations of manufacturing tradition, Munro Engineers continues to innovate with its range of fencing products

1. Post hole digger 2. Wire winder 3. FenceBoss temporary electric fence system

Munro Engineers has designed its products with the user in mind – safety is of paramount importance.

50 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 50

L

eading Australian fencing machinery manufacturer Munro Engineers produced its first posthole driver over half a century ago, and has since sold thousands across Victoria and the world.

When it debuted at the Australian National Field Days in 1964, Munro’s post driver combined a post driver with a fast drilling auger – an innovation that won the company the prestigious invention award.

Company owner Warren McLean said the original Munro posthole driver was manufactured after a bet between two farmers about who could make the best posthole driver.

“The farmer who won the bet, Alastair Mackenzie, and his friend Max Brooke, an hydraulics engineer, approached my father Max McLean,” says McLean.

“We finished the design and manufactured the first model in 1964.

“It was the first machine in the world that combined an auger and a driver for installing posts.”

Having started in the 1800s building tobacco presses, chaff cutters and conveyors, the popularity of the new machine prompted Munro Engineers to move to specialise in fencing products.

Today, the Ballarat factory employs about 30 people, with McLean family patriarch, Max, 86, still very much a part of the business.

Munro Engineers has used its innovation to become a world leader in the design and manufacture of fencing machines.

Its suite of fencing products includes the Munro AutoDriver, which combines in one machine a fast action rock breaker-style hammer and an hydraulic auger for drilling pilot holes.

Warren says that feedback from customers over the years showed Munro posthole drivers increased productivity, saved time and were cost effective.

“Single man fencing contractors who have swapped to the

AutoDriver say it’s increased their productivity, with some doubling the number of posts they are able to install in an hour,” he says.

“The feedback from customers is about how long the machine lasts, how well it’s made and how well it does the job that it’s designed to do. Our service and spare parts are second to none.

“We really look after our customers, many of whom are repeat buyers.”

Another innovation is the Munro Multi-Sett, an all-weather system that combines a fast action earth auger for drilling a pilot hole with a powerful post driver for setting a tight post every time.

Also new is the recently introduced WireWinder, which allows users to coil 500 metres of fencing in under a minute – which is proving popular with both contractors and farmers.

A 300 acre dairy farm with a lane system was wound up in just over two days. This would take almost three weeks by hand.

For those involved in strip grazing Munro has now manufactured the FenceBoss temporary electric fence system, designed to make setting up and pulling down temporary electric fencing quicker, easier and safer.

It prevents loss and damage to reels and pegs whilst making transporting them a breeze.

Munro Engineers has designed its products with the user in mind – safety is of paramount importance.

The hydraulics provide inherent fail-safe features – if a control lever is released the action it controls stops immediately.

A series of guards prevents the operator from touching moving or dangerous parts of the machine during operation without compromising effective operation.

To find out more about these products, contact the team at Munro Engineers at info@munroeng.com or 03 5334 2770

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 1:00:48 PM

TradeFarmMachinery.com.au 51

FFM 398 41-67.indd 51

5/5/21 10:07 am

SPONSORED CONTENT

always with you At the end of a difficult financial year, it’s vital to have trusted support on hand to help out, and the team at Vanderfield does just that Above: As we approach the end of the financial year, it’s time to get all of your information in order Below: Raymond Arcidiacono

Good support makes your business operations run smoothly and successfully.

N

o matter what point you are at in the season, you always need good support from your business partners. Whether they are your agronomists, financial advisers or local machinery reps, good support makes your business operations run smoothly and successfully.

As we approach another key point in the season – the end of financial year – there are many things to consider in order to ensure your business is ready for the new year, and there are no bumps in the road.

Your records need to be up to date, including documentation for any asset purchases, equipment finance and contracts/ settlement statements for property purchases. You also need to make sure you are prepared with a reconciliation of your livestock numbers, fodder on hand and other assets that your accountant will be wanting.

On top of this, you might want to take advantage of any instant asset tax write-off incentives and offers. Maybe you’re looking at adding a new piece of equipment to your fleet?

Turn to your business partners to see how they may be able to support you at this time.

The Vanderfield team, across its sales, support and service representatives, is always on hand for any questions or advice around machinery purchases or updates at this time of year.

A CUSTOMER’S EXPERIENCE Raymond Arcidiacono is a capsicum grower from Ballandean, Queensland. He and his family have been working with Vanderfield for almost 20 years and he credits the team with always going the extra mile.

His farm is two and a half hours away from his local branch, but he says it feels like it is just down the road, and thanks his local Vanderfield team for always having his back.

Arcidiacono runs a John Deere 6830 Premium Tractor, 6105R, 6090RC, 6090MC and 5075M Utility Tractors, a 1026R Compact Utility Tractor and an 855D Gator across his two properties and packing shed, among other equipment.

“If one of our machines stops or breaks down, pretty much the whole show stops. From ground prep to planting, we need them to be there and ready to go,” he says.

“Downtime for even a week in a critical time for us means planting will be delayed and we won’t hit the market at our required time. When we’ve got contracts to fill, we need to be starting on time, with no downtime, so it’s a domino effect if something goes wrong. We value the backup and support that comes with our machines. If you can’t support the product, there’s no point having it, but Vanderfield’s support is exceptional.

“Our closest Vanderfield branch is 2.5 hours from our farm, but it’s like having them down the road. They care about us and our operations, and are more than just a dealership to us, but a true partner.”

GET IN TOUCH Across its now expanded branch network of 22 branches in Queensland, Northern NSW and Northern Territory, Vanderfield has a large range of John Deere equipment to support your farming operations.

Whether it’s a mower, Gator utility vehicle or tractor, Vanderfield has always got you covered. Plus, its committed sales, service and support teams are always there for you and your business.

Contact your local Vanderfield branch today to find out more about current deals and rates on John Deere ag utility equipment.

To get in touch, call 1300 VANDER (1300 826 337) or visit www.vanderfield.com.au/always

52 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 52

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:49:58 PM

TradeFarmMachinery.com.au 53

Raymond Ballandean, Qld

Always with you FFM 398 41-67.indd 53

FFM-FP-5011726-CS-398

Vanderfield has always been there for Australian agriculture since 1963.

A lot has changed since then, but not our commitment to our customers.

Learn more about Raymond’s experience at vanderfield.com.au/always

5/5/21 10:07 am

SPONSORED CONTENT

unique design Designed in New Zealand, the Taege range of air seeders boasts the right tines for success

Above: Taege seeders have a unique design that allows the tines to move independently of the frame

It is an exceptionally good product with smart engineering.

54 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 54

N

ot all air seeders are created equal; the Taege range from New Zealand is tried and tested in some of the most rugged conditions, making it the perfect fit for Australian farms.

Derek Genoni, from Australian distributor Gendore Group, says it is the clever, germination-focused design that sets these seeders apart, delivering optimum performance with a great operator experience.

“Taege’s seeder design is unique, with narrow tungsten points mounted to vibrating ‘S’ tines that are set on a specific angle, so that the tine buries itself in the ground,” explains Genoni.

“The tine goes up and down over contours independently of the frame, jumping rocks and following banks and hollows in a way that other machines simply can’t achieve.

“It cuts through trash and hard compacted ground to plant the seed at a consistent depth, creating the perfect seed bed for superior germination and moisture retention.”

On all machines, the ‘S’ tines are spaced 121mm apart, in four well-separated rows for exceptional trash clearance.

The AS480 4.8m-wide and AS600 6m-wide models fold to 3.1m for transport. Trailed models are also available in 3m, 3.4m and 3.6m widths.

“Our wide range of models allows operators to balance

horsepower requirements with efficient passing across the paddock,” says Genoni.

Designed primarily for pasture renovation, the seeders can also be used for cereal crops at rates from 600g/ha for fine seed to 200kg/ha with fertiliser.

Depending on the model, the Taege calibration system can handle up to three different boxes with no need for new controllers when upgrading from a one box unit.

“The electronic calibration is very advanced but just so simple to use,” explains Genoni.

“And the gentle double sponge roller metering system gives precise application of very low and very high seeding and fertiliser rates.

“The major advantage is you can change rates on the run without leaving the tractor seat; a huge advantage when seeding over differing soil types.”

Genoni says working speed over the paddock could be up to 25 per cent faster with a Taege.

“You can only do that with a machine that follows the contours,” he adds.

“It is an exceptionally good product with smart engineering, designed to deliver superior performance in all conditions.”

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:52:08 PM

TradeFarmMachinery.com.au 55

Better penetration.

Better tilth.

Taege Direct Drills give you outstanding tilth, even in extremely hard soil conditions.

With ultra flexible tynes and hard wearing narrow tungsten faced points, Taege’s superior ground breaking technology provides higher strike rates.

• Live tynes for less rock and existing grass pull out, better trash clearance • Phasing ram system ensures even seed depth • Great contour following and ability to drill around corners • Electronic metering for quick, easy and accurate in-cab calibration • Simple construction means minimal maintenance

Dealer enquiries welcome

Find you nearest dealer at

gendoregroup.com.au AD-591996311.als - Base Edition 55

5/5/21 9:46 am

REVIEW

modified drag tractor called Turf Cutter, while son Jordan remains loyal to his preferred race tractor, with a couple in the shed that he drags out for sled pulls when it’s race time.

However, on a day-to-day basis, the bulk of the Sinton’s John Deere fleet is hard at work in front of the fleet of power harrows, balers and drills.

Pride of the fleet these days is the new four-metre John Deere 750A direct drill. Having run a three-metre version of the same drill for seven seasons with great results, Wally and Jordan had a clear picture of what they wanted when it came time to order a replacement drill.

With their new drill supplied by AGrowQuip Cambridge, the decision to upsize to a four-metre drill was largely driven by working out the sums on being able to deliver customers a better efficiency of area covered per hour, as well as still being able to run the drill with a relatively low horsepower tractor, such as their John Deere 130R (which can boost to 150hp [112kW] when working at over 12km/hour and using around 10 litres of diesel per hour).

Being able to keep running costs as low as possible can have a significant impact on the success of an agricultural contracting business, which often operates on tight margins.

The ability to run a four-metre drill behind such a low horsepower tractor is an attractive drawcard and Wally’s team of experienced operators is well up to the challenge despite the ribbing they sometimes get when they turn up with such a large drill behind a four-cylinder tractor.

1 THE TEST

superseeding expectations When it came time to decide on a replacement drill for its well-used three-metre John Deere 750A drill, New Zealand contractor Regrass Contracting chose to upgrade to the same brand and model – this time opting for a new four-metre John Deere 750A. Willie McKnight reports

F

Images Justin Bennett 56 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 56

ather and son team Wally and Jordan Sinton operate Regrass Contracting on the outskirts of Cambridge, in New Zealand’s North Island, specialising in cultivation and baling.

The duo are long-time fans of the John Deere brand, with an impressive collection of green tractors in their sheds, including a couple of revamped models used for their passion for tractor pull events.

Both Wally and Jordan hold a number of records in tractor pulling, and Wally has even run more than a couple of his own events. These days, he drives a 650 horsepower (485kW)

On the day we caught up with Jordan to see the new John Deere drill in action, he was working in a paddock of sprayedout chicory, direct drilling annual ryegrass (with no cultivation).

Previously, the paddock had been in permanent pasture and the earlier three-metre John Deere drill had sown this into chicory – again, with no cultivation.

The John Deere 750A is widely regarded for its versatility, with the ability to plant small seed, chicory, or turnips all at the change of a cog setting. This can be done without tools and is part of the metering system.

The drill is also equipped to deal with perennial ryegrass and annuals, right through to large seed oats at 100kg per hectare.

The brand says the machine is capable of a sowing rate of up to 400kg per hectare, but the Sintons have yet to require this higher rate.

With a single disc opener, the drill can operate easily in a high trash environment, making it extremely versatile for a range of conditions, such as working into maize stubble to reduce soil compaction or sowing into fully cultivated ground as well.

The robust built is a definite asset with this kind of demanding workload. The heavy-duty frame features large structural cross members to anchor the front and rear coulter gangs. The opener rocker shaft, rotating bearings, and hydraulic system anchors are over-engineered to provide a long working life.

The drill is attached via two-point linkage to the plough arms of the tractor, not the drawbar. This makes easy on/off attachment and also means the height can be easily adjusted to keep the drill level in all conditions.

With this model drill designed for straight line operation, operators square off the headlands to avoid subjecting the openers to side loading and undue wear.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:52:57 PM

REVIEW

2

3

4

5

6

7

GETTING AROUND

METERING SYSTEM

The three-metre version of the John Deere drill features a single rigid frame. The new four-metre features folding hydraulic wings to enable the three-metre transport width. Folding is easily done from within the cab with the select control valves.

A mechanical locking link can be applied for additional safety when in transport mode.

The well-proven Accord metering system is ground-driven on Sinton’s drill as opposed to being electronically-driven through the Isobus system. This allows the 750A to be operated behind older tractors that aren’t equipped with Isobus.

The Accord system is easily and accurately calibrated by the turn of a lever. A steel ground wheel provides drive for this metering system. If operating through Isobus with electronically-driven seed delivery, the ground wheel is still used to provide a signal that the machine is planting.

The fan delivering the seed from the metering system is hydraulically-driven and runs at around 4,000rpm on the four-metre drill and 3,000rpm on the three-metre drill.

SEED HOPPER The John Deere 750A is a seed-only drill, with no separate fertiliser hopper. The 1,800-litre seed hopper is mounted lengthwise on the centre frame. A ladder and platform provide access for opening the hopper lid, but there’s no provision for seed carrying. However, this can be spec’d in as an additional option (at the rear of the drill). Options cater for a variety of placement designs, depending on personal preference.

Wally and Jordan opted for an additional high platform for carrying and loading seed (with safety rails), as well as mudguards that double as steps.

With John Deere 750A drill hoppers mounted so high, getting 25kg bags of seed up the hopper takes a bit of physical effort, but using a tractor bucket or trailer makes this more easily done.

PLANTING TIME The Pro Series Opener has a single disc, which is 18 inches (46cm) in diameter with a seven-degree offset, creating a small slot for seed to drop into.

The coulter assembly is spring-loaded to this disc and air delivers seed from the hose via a simple flap into the slot

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM2106_398 editorial.indd 57

1. T he John Deere 750A four-metre direct drill 2. D istinctive John Deere branding poked depth wheels and the new serrated 3. S closing wheel 4. Minimal soil disruption is created when direct drilling grass into chicory crop 5. A simple control monitor inside the cab is easy to use 6. I ndependently sprung coulter assembly 7. J ordan Sinton is impressed with the performance of the new drill

Pluses Low horsepower tractor requirement Minimal ground disturbance Easy seed depth adjustment Consistent seed depth delivery Reliable seed to soil contact for consistent germination Ability to sow all types of seed

Minuses Long drill to manoeuvre High seed hopper Not set up to deliver fertiliser

TradeFarmMachinery.com.au 57

6/05/2021 12:53:01 PM

REVIEW

Top: Ease of use is a major bonus Above: There is complete closure of the seed slot by press wheels and serrated closing wheels

John Deere 750A Direct Drill Length

6m

Height

2.55m

Brake system Hydraulic or pneumatic Four wheels – 31x13.5x15 Transport wheels/tyres 8PR or 31x15.5x15 8PR Hopper vol.

1800L

Filling height 2.55m Row spacing 166mm Opener disc

460mm-diameter single disc with 7-degree bevelled edge

Gauge wheels

115 x 410mm (4.5 x 16.1in) with semi-pneumatic tyre

Depth adjustment

13 to 89mm (0.5 to 3.5in) in 6.35mm (0.25in) increments

Press wheels 25 x 254mm (1 x 10in) with rubber tyre Closing wheels

25 x 305mm (1 x 12in) castiron wheel at 15-degree angle to the furrow

Ground clearance (transport)

203mm

Marker arms Hydraulically actuated Trans. width

3m

58 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 58

opened by the disc. The seed is then pushed down by a simple press wheel, fitting perfectly into the slot and creating even contact of seed into the soil. This is then closed by a serrated wheel, which is a new improved feature on this drill.

Drilling depth is controlled by a large rubber wheel. Located on the opposite side of the disc to the coulter, this can be set at a depth ranging from 13 to 90mm.

As standard, the 750A comes with a solid rubber wheel.

Regrass Contracting has spec’d its drill with a spoked wheel option – its preference for running the drill in wetter spring conditions when chicory or turnips are sown. This eliminates soil build-up behind the depth wheel.

Each planting assembly is independently sprung and independently adjustable, separate to tractor-delivered ground pressure, which is set at around 40kg. This can easily be increased to a maximum of 250kg of down pressure – ideal when working in tougher or uncultivated ground.

Equipped with 24 coulter assemblies, this gives 165mm spacing between planting rows, particularly ideal for fodder crops.

MARKER DISCS As standard, the four-metre John Deere 750A does not include marker discs. However, these are an option often chosen for those drilling in full tillage ground or hard-to-see trash environments. Most of the Regrass Contracting fleet run Green Star GPS, so marker discs aren’t required anyway.

THE MONITOR The drill monitor is straightforward, offering information on hectares sown, fan speed and a no-seeding alarm. It also records total hectares sown for each job as well as a season and drill total.

If spec’d to run with an Isobus system, additional information is recorded, and adjustments can be made from in-cab. Seed rate can be adjusted without having to get out – a time-saver for those with Isobus.

SUMMARY Versatility is the main drawcard of this John Deere 750A drill, plus, it’s also user-friendly. With the ability to change between direct drilling into pasture and arable drilling in all soil types, it also achieves minimal ground disturbance and compaction.

A big plus is the fact a lower horsepower tractor can pull this machine through the ground. Regrass Contracting runs at the lower end of the 150 to 200hp recommended, but what it lacks in horsepower, it makes up for in less ground compaction and the ability to get into tight corners.

Another definite plus is the low ground disturbance when renovating pasture. Along with a skilled operator, this all combines to make for a productive and consistent planting machine.

To find your nearest John Deere agricultural machinery dealer, visit: www.deere.com.au

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:52:57 PM

TradeFarmMachinery.com.au 59

Full Power.

ProfiLine FZ.

The measure of all front loaders.

Distributed in Australia by: Wilhelm STOLL

Burder AgAttachments P: (03) 5722 2343 Tel.: +49 5344 20-222 Maschinenfabrik GmbH

Kerr Street, Wangaratta, F: (03) 57213401 VIC 3677 21 I 38268 Lengede E: cam@burder.com.au sales@stoll-germany.com Bahnhofstr. www.burder.com.au STO_ANZ_210x297_1Seite_hoch_ProfiLine_2010.indd 1

AD-591996311.als - Base Edition 59

www.stoll-germany.com

02.03.21 12:11

Available from all Good Dealers or Call our Sales Team on:

5/5/21 9:46 am

REVIEW

Images Dan Reymer

all the right moves H

aving gone through a few sets of mowers over the years, Mowers are often the most New Zealand agricultural contractor Reymer Ag recently unexpected multi-purpose invested in a new set of Claas Disco mowers, with a 3200 Move tool on the farm and when it FC (with a tine conditioner) on the front, for mastering the comes to choosing a mower, challenges of undulating Waikato terrain. durability and dependability Mowers don’t generally get the easiest of times. Not only expected to do the job it’s designed to do, they are also often are often at the top of the inadvertently used as levelling bars, rock pickers, fence removers, list. With this in mind, and even the odd irrigation pipe aligner – it’s a pretty demanding Dan Reymer gave the job sheet.

Claas Disco 8500 C contour FIT FOR TASK mower fitted with a Claas When it came time to choose a new mower, Reymer Ag needed Disco Move 3200 FC tine a machine that contoured well and was agile enough for some conditioner a spin on the of the smaller dairy farms but also big enough to keep in front of green multiple machines at once for various daily set-ups.

Pluses Moving front mower bed changing angle to follow undulating contour Clear gauges and height arrows Easily folding hazard panels and front skirts Front mirrors Simple rear unhitching with easy folding stands for solo operation Driveshafts are easy to grease and access Mower can pivot up to 30 degrees laterally Universal joints are low maintenance, only requiring grease every 250 hours

Minuses Individual lift and drop is different to what most would be used to Controller is getting dated with no colour or touchscreen

60 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 60

After sussing out a few different options available, the Reymer team decided on a set of Claas Disco 8500 C paired with the new Claas Disco Move 3200 FC. Having done a few hectares with other mowers myself over the years, I was keen to see how the new Claas Disco performed.

Spending a few days on the machine allows you to learn quickly how it feels and how it reacts to different ground types. Scalping becomes a thing of the past, thanks to the Move front mower.

Following the machine around for a full season on a loader wagon and a baler, I haven’t seen a single piece of scalped ground on any job – and that’s over a variety of different conditions.

Going from flat peat paddocks where stumps fire through them, to Kawhia on the West Coast where a smooth flat square paddock is an extreme rarity, to sliding across hillsides finding the odd bull hole – the Waikato terrain certainly keeps you on your toes as an operator and proves challenging for most gear, no matter how well designed, but not once did the Claas Disco try to dig in, and all three mowers cut at an even length all the time.

Talking with the main operator for the season, Keith Brownrigg doesn’t have any faults to complain about either, aside from them not being spec’d with the irrigation line warning system.

With only a month on the clock of the machine, he was less than impressed when the situation arose where a few metres of irrigation line wrapped around the conditioner. A warning sign is required to comply with health and safety regulations on random flying objects generally accompanied by some indecipherable unhappy swear words.

SET UP The new Disco Contour 8500 C and Move 3200 were coupled to a Fendt 722 when we had a go on them – this handled well, and the machine was manoeuvrable. Starting up the mowers strains most tractors, but as most who drive a bit know, starting one and then waiting a few seconds before starting the other prevents the tractor from stalling.

The mowers are Isobus-compatible, but during usage, they were run off the Claas controller, which is the same for most of the range, so operators are familiar with the controls (although personally, I feel this is starting to get a little outdated with a lack of colour and difficult navigation).

With some hours behind the wheel, it is obvious that 200 horsepower (149kW) handles the 8.3-metre mower set well. As you’d expect, heavy crops going up hills slows things down a touch, but that’s par for the course no matter what you have on behind or in front.

FEATURES Claas definitely decided to showcase its experience in mowers when it designed these. From the first leading edge right to the tip of the rear cover, it’s clear this isn’t their first rodeo.

The Disco front mower has changed a lot from the old models, incorporating an all-new float system, which tilts the mower bed depending on the contour in relation to the tractor.

Hills, drains and cow pugging are inevitable and clear arrows on the front and rear ensure the operator has them set to the right height, while a large pressure gauge ensures the correct amount of float pressure.

The traditional Russian roulette when pulling out of an intersection is greatly reduced, thanks to well-placed mirrors on

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:52:28 PM

REVIEW

the front mower. The rear of the hazard panels is painted so there isn’t any glare off them at night, which helps reduce operator fatigue, because after a long day mowing, the last thing you want is lights reflecting back at you, especially with the new LED lights most tractors are equipped with these days.

Hazard panels can be a pain to work around, and it seems that, no matter where you put them, they are in the way somehow or look absolutely absurd. These ones mounted on the front fold out the way with gas struts so there are no pins to move or lose in the middle of the night when you are rushing to get home for dinner.

On the rear, they are mounted on the light frame with rubber mounts to prevent the vibration of being at the utmost edges from cracking the steel. This also provides some added protection in the unfortunate event of clipping a strainer post trying to manoeuvre into a tight gateway.

OPERATION Hitching up is made straightforward and easy, thanks to double cones on the rear linkage balls. This means the arms guide themselves in, saving multiple trips in and out of the cab, adjusting stabilisers if you are having a bad day. As machinery

2

3

4

5

6

and tractors keep including superior technology and requiring less operator input, there is a drop in the daily exercise hopping in and out of tractors, which just means the trip down the steps back home for lunch is completely justified to keep the daily step count up.

Once in the paddock, to unfold the butterflies, a lift is required to unlatch along with going into the unfold screen on the controller.

These fold down nice and quickly and stop in their lifted position ready for the power take-off (PTO) to be turned on. Once done, it automatically jumps onto the run screen where you are required to lift the hydraulics before you can float them onto the ground.

The Fendt Vario terminal using the ‘go’ and ‘end’ buttons was a dream to use, with the correct distances for the drop and lift, so all mowers start and end at the same physical place essentially saving fuel, as you’re not putting an unnecessary load on anything.

It took a bit to get used to the way it lifts and lowers the individual rear mowers on the Claas terminal as it is not like some other implements. If the left mower is selected when the mowers are down and you pressurise the hydraulics to lift, the right-hand one will lift. Then when both are in the air and the left-

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM2106_398 editorial.indd 61

1

1. Hazard panels fold out of the way for extra visability and are painted so lights don’t glare off them at night 2. Mirrors on the front are well placed and ideal for good vision before pulling out at intersections 3. The compact design keeps the road width skinny and keeps the weight closer to the tractor 4. Compact. sleek modern design covering up the Move float mechanism 5. The standard Claas monitor 6. Well-designed rear board with rubber mounts to prevent cracking and bending

The Disco move is pretty incredible with its contouring abilities; whether on hills or rough ground.

TradeFarmMachinery.com.au 61

6/05/2021 12:52:35 PM

REVIEW

6 7

6. G reat rear visibility from the cab and a streamlined design loating through a small hidden spit 7. F drain at pace with ease

leave a bit of striking, but I believe the rear mowers can be spec’d with side shift to counteract the tractor sliding.

The rear mowers are folded up vertically and would generally be the same width as the tractor. The rear light frame is kept close and angles up to cope with undulating terrain. In extreme cases, as with any mower, it would still be able to foul the ground, but a simple linkage lift would solve that.

It does look like a nice tidy set-up coming down the road for sure.

CONTOUR

Claas Disco 3200 Move FC Working width

3m

Transport width

3m

Attachment

DP

Weight

1.22T

PTO speed

1,000U/min

Conditioner

Rotor

Claas Disco 8500 C Working width

8.3m (larger models available)

Transport width

2.95m

Transport height

4m

Weight

2.1T

Knives

Quick-change knives as standard

PTO speed

1,000U/min

I found these Claas Disco mowers super easy to manoeuvre and there are a number of design features that finish it off well.

62 TradeFarmMachinery.com.au

FFM2106_398 editorial.indd 62

hand one is selected, the left-hand one will drop, which did catch me out a couple of times. It could be different when run through the Isobus, but the adapter cable was on another machine at the time. And, like anything once you become familiar with the process, it all becomes second nature.

Once the paddock is done, the controller will not let you fold up until the PTOs and the mower bed are stopped. This is a great safety feature and helps extend the life of PTO shafts as well as preventing any accidental folding of the machine.

It is amazing how much technology can be put into things these days. Ten years ago, a mower was a mower (and let’s be honest, it probably helped out with a bit of land reclaiming once or twice), but moving with the times and technology, it is amazing how mowers today incorporate with modern tractors and how userfriendly things are made.

From saving the operator a few minutes every paddock to protecting itself from destruction, plus helping the operator to make daily servicing and maintenance easier, it is all cost saved in the long run for both the farmer and contractor.

TRANSPORT When it comes to road transport in agricultural vehicles, the rules and regulations are hard to keep up with and seem to change just as soon as you get used to something. The Disco Move 3200 FC front mower has a cut of three metres; a touch narrower than the 3600 with its 3.4-metre cut. The front wings are folded up for road transport, which keeps it snug when manoeuvring tight gateways.

The front mower does sit fairly well forwards on the tractor, but I have not found it to be an issue yet. Sideways across hills it can

Put simply, the float mechanism on the front mower is bloody impressive. Boasting a 1,000mm vertical movement range, once you go about putting this into practice, it’s easy to see what the rave is about.

During our test conditions, an old spit drain was well hidden under the grass and it glided on through without a worry in the world. The operator felt it once the tractor got to it, but it showed how the front mower moves as its name suggests.

The rears get an easier life following the tractor, and of all three of the mowers, none of them scalped the grass and all maintained a pretty even cut length throughout the drain. The rears didn’t dive into the drain as much as the front did, as you’d expect, as the tractor carries them through.

SUMMARY I found these Claas Disco mowers super easy to manoeuvre and there are a number of design features that finish them off well.

There’s nothing worse than a great machine that hasn’t been finished well or has missed some of the small things – but Claas seems to have ticked all the boxes here.

The mowers are basic enough that nearly anyone can use them, but, if needed, they have all the tech in them to set them up to be fully integrated into the tractor. The Disco Move is pretty incredible with its contouring abilities; whether on hills or rough ground, it never fails to deliver. You’d be pretty confident that the bed will stay under it and not get caught in an unseen bull hole.

With the right level of size and brain, Reymer Ag can use it to its full potential for the ground it runs on, whether big, open dairy farm paddocks or squeezing into lifestyle blocks. With the mowers operating ahead of all the other gear and the first step in the silage making process, it has to be done right and with quality results, which this delivers.

Visit your local Claas Harvest Centre to view the Disco range of mowers.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 12:52:30 PM

TradeFarmMachinery.com.au 63

ADVANTAGES OF A PIPE AND RISER SYSTEM OVER AN ON FARM CHANNEL SYSTEM No loss of water when filling Farm Channels No more fixing leaking bayoutlets & channels Removal of farm channels will increase crop acreage Easier access around your farm

APPLICATIONS FOR PUMPSETS Aquaculture water circulating Pumpsets

Uneven ground conditions make gravity farm channels impossible to accomplish without major earthworks This system will save you both time and money

Mining Dewatering Pumpsets

WE OFFER:

Agricultural Irrigation Pumpsets for Pipe & Riser systems

Pumped Pipelines

Lift Pumpsets for farm channels Recycle dam Pumpsets River Pumpsets Pumpsets for Irrigation Pivots & Lateral irrigators

Reuse Irrigation Systems Road Crossings Submersible Pumped Systems Sewer Pipelines Water mains

Precise application, both these systems can be set to deliver a prescribe volume to match the requirements of the crop in the ground.

Efficient water use, which prevents water runoff.

High degree of automation which can reduce the amount of labor required.

System can operate at lower pressure that other types of spray irrigation saving on energy costs.

A center pivot or lateral system is applicable to almost all crops including arable crops, vegetables, and fruit trees.

Cuts down on water usages compared to flood irrigation.

Less land forming, these systems can work on rolling topography.

FFM-FP-5204815-CS-397

Transfer Pumpsets

Gravity Pipelines

ADVANTAGES OF A CENTER PIVOT & LATERAL MOVE IRRIGATOR

AD-591996311.als - Base Edition 63

5/5/21 9:46 am

REVIEW

Images Mark Fouhy

bigger isn’t always better In farming and contracting, as a generalisation, bigger is better. However, after testing a Joskin TransCap dumper silage trailer, Mark Fouhy is reminded of Goldilocks and getting things ‘just right’

Pluses Good capacity, without being too big Good to tow full or empty Multi use: silage, grain, or dump trailer jobs Easily removable side extensions in 250mm and 750mm sections Bathtub design for clean dumping Well-designed and built: should equate to years of trouble-free use

Minuses Hydraulic jack can get caught on the ground.

Australian distributor Colac Ag fits a skid to prevent this issue from occurring

The Joskin Trans-Cap is a truly multi-purpose machine aimed at the farmer/contractor

64 TradeFarmMachinery.com.au

FFM2106_398.indd 64

A

rriving north of Paeroa on New Zealand’s North Island to catch up with the team from RK Flint Contracting, we found one of its larger loader wagons wedged between two gateways, with the other trailers arriving and slowing down the flow of maize to the stack. Our Joskin test machine, however, quickly found an alternative way to the pit: backed up, dumped and was away again for the next load.

As a standard bathtub design, the Trans-Cap has a capacity of 15.5 cubic metres and is rated to a total of 14 tonnes. With side extensions, an extra 13.2 cubic metres can fit per load to give a total capacity of 28.7 cubic metres (or around 29.1 cubic metres heaped).

The big question is: how do these trailers tow? Both the main contracting driver and I were in complete agreement – it tows bloody fantastic! Anyone who has done any tractor and trailer silage hauling will no doubt have had their share of horrible trailers, ones that bounce when unloaded or loaded and rattle and shake so you can hear them coming across the county.

There was absolutely none of this carry-on from the Joskin Trans-Cap trailer. Some of this is down to the simple leaf spring on the drawbar. This runs across the trailer – a proven design I’ve seen used on the Joskin slurry tankers in the past. The tandem axle is running a basic (heavy-duty 18 tonnes) ADR rocker beam bogie. The Joskin bogie is a bolt-on unit, which allows adjustment to balance the weight between the trailer, hitch point and tractor for added traction. Joskin assembles its own bogies so each is personalised to suit that specific machine.

Standard on quality BKT 560/45R22.5 rubber, this was one area Flint Contracting would spend some extra dollars – investing in wider tyres to compensate for the fact that they frequently operate on peat country. However, in many cases, changing to wider tyres also means they are slightly taller, too.

At its present set-up, the Joskin Trans-Cap is narrower than the John Deere 6215 pulling it, making it straightforward going through gates with the 2.5-metre-wide trailer fitting easily. No

stuck trailers with this model. With a bin length of 5.5 metres and an overall length of 7.2 metres, it’s fairly compact with minimal tail swing when turning off narrow roads or laneways into small gateways (which are still relatively common).

Tipping at the pit was a quick affair. With a single-stage ram, the trailer is tipped to a maximum 50.1 degrees and back down in no time. A parachute safety valve is fitted that requires counter pressure and prevents it just slamming back down, should the hydraulic hose ever blow off.

An oscillating cradle allows movement of the ram forward and rear as well as left to right. This reduces stress to the chassis.

There are pluses and minuses of single or twin lift rams. The single ram gives quick operation with low hydraulic oil flow requirement and a smooth, even drop. It also keeps the chassis of the trailer narrower, allowing options for wider tyres, while staying within road requirements for width.

Standard equipment for these trailers is four-wheel hydraulic brakes, with air brakes an optional extra. Road lights are also standard. Mounted on rubber, they are designed to flex and move out of the way rather than breaking. Also, the rear flashing light is wired into the main lights of the tractor, so it automatically turns on with the tractor lights.

For loading, there’s a perspex front window, protected by metal bars to help with improved vision for seeing what’s going on around you. If you should need to climb into the tub, there’s a ladder to get in and steps to get out. The hydraulic locking rear tail door has a rubber seal so grain won’t escape, and it should also hold water so might make a good pool on hot summer days. The side extensions are two pieces: 250mm and 750mm. Being alloy, it isn’t a big job to remove these when you want to change jobs.

CONSTRUCTION Joskin has been producing agricultural equipment since 1968 and the range of slurry tankers has long proven its popularity with farmers and contractors, and the trailers look set to continue this

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 2:03:16 PM

REVIEW

6

tradition. It’s great to see the addition of the Joskin Trans-Cap to the range – a truly multi-purpose machine aimed at the farmer/ contractor. The fact this trailer is still in bathtub form means you get the added strength of the bathtub design.

The Joskin factory is advanced, with robotic welding of the tubs to ensure the quality of the job is 100 per cent right every time, it states.

The steel used is 4mm, whereas some other brands are using 3.5mm for a similar capacity trailer. With a rolled bottom, there are no corners for partial load to get stuck. Although hard to tell just by looking, the bin has a small taper. Again, this is to help release the load for quick, efficient and safe dumping.

The finish of the Joskin trailer is A1. The two-pack paint system used is done to the same standard as a tractor or lorry to keep

2

3

4

7

8

machines looking good for years. Painting is completed before final assembly of the different components.

OPTIONS The ability to offer such a variety of options means each trailer can be customised for specific requirements. Our test machine for the day was the basic standard issue, and there’s no denying it gets the job done.

Options such as larger tyres, remote greasing or full auto greasing and load covers can easily be added (albeit with extra cost as with all brands).

The Joskin Trans-Cap 5500 works well and suits the 180–220hp (134–164kW) tractors operated by most contractors. If you were after something larger or smaller, it would need to be ordered,

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM2106_398.indd 65

1

5

1. R ubber-mounted lights with steel protection 2. T he leaf spring drawbar suspension works well 3. A flashing rear light is wired to the tractor headlights 4. T he hydraulic jack set-up 5. R emovable side extensions for extra versatility 6. T he parachute safety valve 7. S ingle ram with four-way movement 8. F our wheel hydraulic braking

TradeFarmMachinery.com.au 65

6/05/2021 2:03:22 PM

REVIEW

9

10

11

12

9. Perspex front grill to help monitor loading progress 10. Hydraulic tail door with rubber seal locks snugly shut 11. Large BKT tyres come as standard 12. High-lift tail door for easy dumping 13. An impressive tipping angle of 51 degrees

Joskin Trans-Cap 5500 15 BC125 Body length

5,500mm (avg)

Body height

1,250mm

Capacity

15.5 cubic metres to water level + 3.3 cubic metres with 250mm extension +9.9 cubic metres with 750mm extension

Axle

18T ADR rocker-beam

Tonnage

14T

Length

+/- 7,204mm

Width

2,548mm

Height

2,628mm 2,878mm (with 250mm extension)

13

3,628mm (with 250mm+750mm extensions) Tyres

BKT 560/45R22.5 (options available)

Brakes

Four-wheel hydraulic

and then you can add whatever extras you liked direct from the factory.

SUMMARY It’s worth paying more for top quality, which is built to both perform and last.

66 TradeFarmMachinery.com.au

FFM2106_398.indd 66

It’s great to see this multi-purpose addition to the Joskin line-up.

The fact that it’s not limited to being a one-trick pony and can be used for a range of tasks makes it a worthy contender when considering purchasing a new trailer. Although grass and maize silage are almost done for the season, the ability to keep the trailer busy during the off-season hauling metal and soil would help justify the expense, or at least that’s what you could tell the

accountant. Efficiency in having the right machine for the job helps drive productivity.

The Joskin Trans-Cap is not the cheapest option on the market, but as anyone who has bought gear and relies on it for productivity knows, it’s worth paying more for top quality, which is built to both perform and last.

Joskin also manufactures tankers and muck spreaders, all available through local distributor Colac Ag – with a wide range of sizes and options available to tailor to your needs.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

6/05/2021 2:03:19 PM

TradeFarmMachinery.com.au 67

Hay Handling, think Muller..

SEASON SALE OFFERS M FRO

!

K 5 . $4

ACCUMULATORS

6 TO 15 FOOT SLASHERS MANUFACTURED IN AUSTRALIA TO AUSTRALIAN STANDARDS

CHASER BIN

GRABS

07 3085 2987 sales@mullerfab.com.au www.mullerfab.com.au

AD-591996311.als - Base Edition 67

5/5/21 9:46 am

68 TradeFarmMachinery.com.au

AD-591996311.als - Base Edition 68

6/5/21 8:09 am

TradeFarmMachinery.com.au 69

ONE PERSON, ONE TRACTOR JADAN COLLECTING & STACKING SOLUTIONS

Jadan offers high-performance hay handling systems that are specifically designed for the farming market in Australia. These simple and robust machines create efficient and faster hay handling systems that take the sweat out of handling bales.

BIG BALE STACKER

1300 523 263 | www.jadan.net.au

FFM-HP-5168397-TS-375

ACCUMULATOR & GRAB

Scan here to watch videos, or visit www.jadan.net.au/videos

Green One

GrainRite

Self Propelled Augers are designed and built strong and tough in Australia for Australia’s demanding conditions. Finger tip hydraulic controls allow the operator to raise & lower each end, ground drive, and steer.

Heavy duty barrel and frames reduces operation vibration considerably - less vibration means less grain damage. Reverse gear box with positive lock allows quick and easy cleanout.

FFM-HH-5014229-TS-314-XCC

All our augers come standard with highway lighting, oversize sign, new 10 ply tyres, aluminium mud guards, fire extinguisher, drop spouts, cast iron pulleys, and many more features and options.

GrainRite Augers have a 10.75” width barrel that is 2.5mm thick. GrainRite Augers are available in 35’, 50’ & 60’ lengths.

Call 03 5397 5200

or email us at info@grainrite.com.au

www.grainrite.com.au AD-591996311.als - Base Edition 69

5/5/21 1:02 pm

70 TradeFarmMachinery.com.au

BYPY TRANSMISSIONS PTO Shafts and Gearboxes

For all your power transmission requirements HORSEPOWER: 12 Hp TO 360 Hp - We have the best range in Australia

FULLY STOCKED WITH EVERYTHING YOU WILL NEED FOR THE SEASON

Call Toll Free 1800 932 113 bypy@bypy.com.au | www.bypy.com.au BYPY Transmissions-Australian Distributor of Bondioli & Pavesi and BIMA

AD-591996311.als - Base Edition 70

FFM-HH-5190089-TS-369

We also stock an extensive range of spare parts for PTO shafts and gearboxes

5/5/21 1:02 pm

Terraland TO 6000

Swifterdisc XE 12400

• Super deep ripper! Rips down to 60cm (24 inches) • One pass operation to super deep rip, mix clay and incorporate lime that also packs the surface for an excellent seed bed.

• The most economical way to transform poor to average sandplain into highly productive country in one pass!

• Medium to heavy country is also responding with great results!

• Special aggressive A-discs, produce the best stubble cutting and mixing action.

• Excellent for incorporating lime and stubble at depth and levelling the paddock.

• Kills weeds and leaves an impressive seedbed with the moisture locked in by the V-ring packer!

• Fixes your seeding trash flow problems in one pass!

Call Grant Borgward

TO AVOID DISAPPOINTMENT ORDER NOW TO SECURE DELIVERY

0428 816 701

FFM-HH-5210450-TS-349

TradeFarmMachinery.com.au 71

Designed for hay, engineered to last.

Get in before June 2021 price-rise

15 Bale Accumulators Option to add weighing scales, density controller and/or fold up table.

10 Bale Accumulator - Built to suit VIC customers making longer bales. Option to add weighing scales and density controller

10, 15 or 20 Bale Hay Grabs - We build regular, heavy duty, tautliner and grabs for VIC customers with longer bales. Option to add a side-shift. All loader attachments available.

Stick rakes - All loader attachments available.

Shop on our website for spare parts.

Shuttle Chief 3m x 2m Includes gate

Stock Master 4m x 2.4m Tipper with removable side boards, fold-down gates, center gate and under-tray tool box.

Farm Boss 4m x 2m Includes removable sideboards and gates.

Hay King 5m x 2x4m Includes removable hay racks.

FFM-HH-5168768-TS-394

Custom Trailers

Option to add on side boards, removable racks, tool box, tipper, aluminum ramps, stock crates or lashing rings.

Moving hay, the easy way FFM 398 69-76.indd 71

P | 02 6852 2049 www.rebelequipment.com.au 24 Blayney Street Forbes, NSW, 2871 Australia 5/5/21 1:08 pm

72 TradeFarmMachinery.com.au

VELDONAS

Specialising in industrial motors and pumps WE BUILD DIESEL HYDRAULIC PUMP SETS TO ORDER ASK ABOUT OUR OIL AND TEMPERATURE AND TIMER WATCHDOGS

ROVATTI CHOPPER

TRUCK MOUNTED 12" TRANSFER PUMP SET TRANSFER PUMP

$6,599

POA

Open pump impeller, chopper device, stainless steel plates, heavy duty jockey jacks, hand primer on effluent pumps, pto shaft, heavy duty frame.

STVEL54441. TA10770.

Truck mounted 12" Transfer pump set.

Ask about other specialised applications.

S13. TA11062.

TACHOMETERS FOR DIESEL ENGINES

AIR CLEANERS HEAVY DUTY From 10hp to to 200 hp.

VEL 14307. TA10926.

Prices starting from $130

INDUSTRIAL RADIATORS 20 hp $275 40 hp $360 60 hp $585 120 hp $820 S11. DPLIn27501.

From $275

PERKINS GENERATORS 6,8,10,13,15,20 and 30 KVA generators, single and 3-phase, powered by water-cooled Perkins heavy duty diesel engines, key or remote start, fuel tank base, full engine protection, 500 hours service intervals Ideal backup or prime power Call for your special price!!!. AW54939-ST190912.

DPLIn27583.

POA

D ON

$264

JAPANESE DIESELS Parts available for small Japanese diesels.

AW54939-FM077-060-07.

DPLIn27496.

BLADES To fit small Japanese tractors.

From $8.80 each inc GST. AW54939-FM077-060-08.

DPLIn27497.

POA

ENGINE WATCHDOG TM6 ENGINE SHUTDOWN SYSTEM & TIMER TM6 Oil/Temp Watchdog with wiring diagram $240 + GST TMT Oil/Temp Watchdog with shutdown timer & wiring diagram $460 + GST Solenoids and rack pullers are extra. S37. TA750757. $240 + GST / $460 + GST

$9

PLUTTO PUMP PRIMER Turn your centrifugal pump into a self-priming pump With the new easy to install Plutto exhaust primer throw away your bucket and hand priming pump The Plutto exhaust primer automatically primes up your pump when you sart the engine Priming kit. S18. DPLIn27578. $490

ND

HA

YANMAR DIESEL 6 X SELF PRIMING PUMP

C

SE

Tiny tach for diesel engines gives a digital RPM reading regardless of the number of cylinders. A transducer takes a pulse reading from the injector line Simply bolt the transducer to the injector line, supply a 12-24V DC supply and away you go! It even has a built-in hour meter, service function and max rpm range. S22. DPLIn27532.

With 25 hp Yanmar diesel.

S12. DPLIn27519.

IRRIGATION HOSE HOSE Suction and delivery hose Call for your special price!.

AW54939-FM077-043-01.

$6,310 + GST

DPLIn27516.

POA

ISUZU • MITSUBISHI • KUBOTA • YANMAR Agent for TUTTS • TATHONG • KUBOTA • ENGINES • GODWIN PUMPS

www.veldonas.com

AD-591996311.als - Base Edition 72

5/5/21 1:02 pm

TradeFarmMachinery.com.au 73

www.veldonas.com

Specialising in industrial motors and pumps BUILT TO YOUR REQUIREMENTS

PUMP SETS

BUILT TO YOUR REQUIREMENTS

ALS0 IN STOCK LOW PRESSURE PUMPS *New 4” self-priming pump with S/H Kubota 12 hp diesel, 100,000 lt/hr to 15mt head ................................. $4,890 inc GST *65 bpz bare shaft, 55 mt head ...............................................$380 *80 bpz bare shaft, 65 mt head ...............................................$560 BUDGET DIESEL ENGINES All engines are low hours, fan-flywheel, 3 months limited warranty

*Kubota Z600, 12hp, 2 cylinder ............................................$1,710 *Kubota D600, 15hp, 3 cylinder ...........................................$1,683 *Kubota D850, 18hp, 3 cylinder ...........................................$2,040 *Kubota D950, 20hp, 3 cylinder ...........................................$2,233 *Kubota V1200, 28hp, 4 cylinder..........................................$2,562 *Kubota V1405, 30hp, 4 cylinder..........................................$2,750 *Isuzu 3AF1, 22hp, 3 cylinder ..............................................$2,057 *Isuzu 3AE1, 30hp, 3 cylinder ..............................................$2,376 *Isuzu 3AD1, 34hp, 3 cylinder ..............................................$2,557 *Yanmar 2HS66, 11hp, 2 cylinder ........................................$1,155 *Yanmar 2HS80, 19hp, 2 cylinder ........................................$1,765

DIESEL POWER PACKS ND

CO

SE

NEW OR USED

*Yanmar 3TNA86, 15hp, 3 cylinder......................................$1,770 *Yanmar 3TNA68, 16hp, 3 cylinder......................................$1,870 *Yanmar 3TNA72, 20hp, 3 cylinder......................................$2,035 *Yanmar 3TNA75, 23hp, 3 cylinder......................................$2,075 *Yanmar 3TNA82, 25hp, 3 cylinder......................................$2,629 *Mitsubishi CA700, 15hp ......................................................$2,075 *Mitsubishi K3D, 21hp, 3 cylinder ........................................$1,980

GENSETS

ASK ABOUT OUR NEW FG WILSON GENSETS FROM 10 KVA to 400KVA ENGINES

SOUTHERN CROSS PUMPS

HA

SELF PRIMING 4 PUMP 4 self priming, belt drive.

AW54939-FM077-043-02.

DPLIn27541. $654

D

AN

DH

SE

D

AN

DH

N CO

SE

ISUZU POWER PACKS 3 cylinder diesel, 22-40 hp.

From $3,080.

ST159827.

SOUTHERN CROSS 80X50-315 Isuzu 3AE1, 30 hp diesel, 15 litres per second at 80 metre head.

AW54939-FM077-112-02.

DPLIn27518. $7,850 + GST

ISUZU DIESEL 6 X SELF PRIMING PUMP with secondhand 25 hp.

AW54939-FM077-051-09.

DPLIn27515. $6,310 + GST

DPLIn27579.

GENERATORS

SOUTHERN CROSS 4X3 With S/H Kubota Z620, 13 hp 2 cylinder diesel, 20 litre/second at 20 metre head Economical transfer pump $4,970 inc GST. Kubota. DPLIn27528. $4,970

$1,925

N CO

TO SUIT YOUR PUMPING REQUIREMENTS

*Large range of new and secondhanddiesel engines, 8hp to 100hp, 3 months warranty.......From $1,500 inc GST TRANSPORT ARRANGED AUSTRALIA WIDE

SELF-PRIMING PUMPS

DPLIn27529.

• BENDS • TAPERS • TEES • FOOT VALVES • CHECK VALVES Ask for a quote

WE ALSO BUILD POWER PACKS INCLUDING RADIATOR, MUFFLER, STUB SHAFT, IGNITION, FILTERS, BASE FRAMES.

ND

KUBOTA Z600 2 cylinder diesel power pack Electric start.

PM045-072-02.

IRRIGATION FITTINGS AND HOSES

$3,080

PTO GENERATOR 50KVA - Three Phase - 3 point linkage with heavy duty jack stands.

VEL4156. TA10931. $8,710

MITSUBISHI DIESEL GENERATOR SET 8 KVA 15 hp, S/H 3 cylinder Mitsubishi electric start Engine watchdog, fuel tank. S16.

DPLIn27548.

$5,850 + GST

ND

O EC

S

ND

HA

S

NISSAN QD32 Diesel, 64 hp, 4 cylinder, all new fittings, includes outrigger bearing A real workhorse.

S21. DPLIn27523. $5,780 + GST

KUBOTA V1200 With 28 hp, 4 cylinder diesel power pack New radiator, muffler, hoses, filters, 35mm keyed shaft.

PM045-072-03.

ND

O EC

UP TO 36" MINING PUMPS PUMP VXTE48791.

TA206423.

$14,510

ND

HA

SOUTHERN CROSS 80X50X250 Nissan TD27, 48hp diesel, 20 litres per second at 80 metre head Engine shutdown included. S23.

12" 300 IS TRAILER MOUNTED PUMP SET new pump direct drive coupled to second hand 6cyl Nissan diesel with new tandem trailer with Vin. S33.

$8,270

$18,810 + GST

VARIOUS ELECTRIC PUMPS SINGLE + 3 PHASE elecpu9582.

CUMMINS 66 KVA 6 cylinder diesel generator. S19.

DPLIn27505.

SE

D

AN

DH

N CO

TA750753.

ISEKI 10" PUMP New. 3 cylinder, 40 hp Isuzu diesel.

27480. DPLIn27480. $7,990 + GST

DPLIn27547.

TA206433.

$4,260 4260

DPLIn27568.

$13,387

$3,985

S

ND

HA

KUBOTA SOUTHERN CROSS HELICAL PUMP Kubota - Southern Cross Helical Rotor pump.

From $4,950.

Vel SSS420.

TA226460.

$5,850 + GST

PONTOON PUMP ELECTRIC Pontoon with electric pump. xzdef19652.

TA206427.

$14,910

SOUTHERN CROSS 100X65-315 PUMP SET with Nissan QD32 (65hp), skid fuel tank, oil-temp, hi/lo timer watchdog and fork lift roof.

Vel67912. TA11060. $13,750

9 Wright Street, Sunshine Victoria 3020 | sales@veldonas.com.au Phone 03 9312 0888 • Fax 03 9312 0999 • Mob 0417 709 200

AD-591996311.als - Base Edition 73

PISTON PUMP XF404 With DEK 4.7 hp diesel, 4,000 litres per hour 60 metre head. S24.

DPLIn27531.

$3,300

FFM-DPS-5011411-E

ND

O EC

5/5/21 1:02 pm

74 TradeFarmMachinery.com.au

DOZER SPECIALISTS Late model. Low hours. Customised to your needs.

4 0+ DOZERS

IN STOCK

CATERPILLAR D6T XW 2012, 5,400hrs, VPAT, New U/C, ARO CATERPILLAR D3K2 XL 2018, 1,900hrs, ARO wired, sweeps, CATERPILLAR D3K2 XL 2016, only 780hrs, new sweeps, wired. Sold serviced with workshop report. S765. TA1056499. screens and MS ripper to be fitted. S703. TA1035499. screens and MS ripper to be fitted. S711. TA1035520. $289,900 + GST $169,900 + GST $174,900 + GST

D6K2 XL 2017, only 1,500hrs, ARO wired, CATERPILLAR D6T XL 2015, 4,100hrs, SU tilt, ARO, sweeps, KOMATSU D65EX-17 2015, SU Sigma blade, MS ripper, Top CATERPILLAR sweeps, screens and MS ripper. Serviced with workshop report. rear screen. Sold with MS ripper or 4 Barrel. S681. TA1031013.

Con ready, very good U/C. S712. TA1035521. $269,900 + GST S767. TA1056500. $269,900 + GST $295,000 + GST

CATERPILLAR D6T XL 2015, ONLY 4,100hrs, ARO wired, SU tilt CATERPILLAR D6T XL 2012, 5,000hrs, SU tilt blade, New CATERPILLAR D6T XL 2011, 5,400hrs, SU blade, sweeps, rear blade, Sweeps, Rear screen. Sold with MS ripper. S713. TA1035523. complete CAT U/C, MS ripper. Sold serviced with workshop screen and tank guarding. S644. TA1011193. $265,900 + GST $295,000 + GST or $310,000 + GST with 4 Barrel Ripper report. S751. TA1052200. $294,900 + GST

CATERPILLAR D6DK2 XL 2016, only 1,700hrs, VPAT, 130HP, CATERPILLAR D6T XL 2015, 5,900hrs, ARO wired, VPAT blade, KOMATSU D65EX-17 2012, 5,600hrs, Sigma blade, sweeps, sweeps, screens and 4 Barrel pitch adjust ripper. Excellent MS ripper, Track guards, serviced with workshop report. S749. screens, Top Con ready, reversing camera, MS ripper. S753. condition throughout. S755. TA1052202. $259,900 + GST TA1052198. $307,900 + GST TA1052201. $239,900 + GST

*Conditions apply.

FFM-FP-5192176-E

CATERPILLAR D6K2 XL 2014, 5,200hrs, ARO wired, sweeps, CATERPILLAR D6T XW 2016, 5,000hrs, ARO, Tank guarding CATERPILLAR D6T XL 2012, 5,500hrs, SU tilt blade, ARO, screens to be fitted. MS ripper. Excellent U/C. S724. TA1040118. sweeps, rear screen and 4 Barrel MS ripper. S686. TA1031015. and MS ripper. S769. TA1056501. $329,900 + GST $207,900 + GST $285,900 + GST

ABN: 32932794414

Daz Scale mkntraks@gmail.com

AD-591996311.als - Base Edition 74

5/5/21 1:02 pm

We

everywhere

Are Media publishes across six key platforms to maximise audience reach, engagement and response.

For more information, visit industry.aremedia.com.au

4373_Industry B2B Campaign_FP_FFM_CoreAU.indd 1 Untitled-1 75

5/05/2021 10:52:17 AM 6/05/2021 2:17:32 PM

76 TradeFarmMachinery.com.au

Australia's trusted partner for new and used diesel engines, quality spare parts & rebuilds

CUMMINS NTC 300 Big Cam N TC 400 Rebuild NTC 350 Ex Fire Truck NTC 400 Ex Fire Truck NTC 444 NTC400 Small Cam N14 Various from N14 Mechanical N14 525HP Celect Plus Rebuilt N14 Celect Ex Fire Truck N14 Celect Plus Low Miles NH250 Ex Us Army as New L10 330HP rebuild M11 Low miles from M11 Mechanical Industrial ISM 11 Low km from ISM 420hp low kms 6CT 210hp 800hrs 6CTA 250hp 6CTAA 275hp - Low Kms 6CTAA 300hp 6CTAA 300 Rebuilt 6BT 160hp various specs 6BT New 160hp construction 6BTA 180 hp 6BTAA 210hp -Low kms ISB 5.9 Industrial ISB 5.9 24 Valve VP44 ISC Low Klms from ISC Rebuilt ISL Good Tested From ISL 400hp Rebuilt ISX 500hp Rebuilt QSM11 Rebuilt

CATERPILLAR $12,100 $24,000 $13,750 $15,950 $14,500 $9,350 $11,000 $13,750 $27,500 $13,750 $16,500 $9,350 $CALL $11,000 $CALL $12,100 $14,850 $14,300 $11,000 $11,000 $13,750 $CALL $8,800 $15,950 $9,350 $10,450 $9,350 $8,250 $14,850 $CALL $15,950 $CALL $CALL $CALL

C7 New C9 Various C12 Good Runners from C12 Low Km C12 Industrial C12 Rebuilt C13 Industrial C15 Rebuilt 3116 Industrial & Auto 3126 330hp 3176 with jakes 3196 Industrial 3208 From 3208 Rebuilt 3208T Ex Government 3208 Turbo Rebuilt 3306PC Industrial Running 3306DI Various 3406B Strong motors 3406B Powerpack 3406B After cooled 3406C Industrial spec 3406C Truck spec 3406E Dyno from 3066 New - Last one 3054 Low Hours

$6,600 $5,500 $CALL $1,100 $8,25

DAF $8,250 $8,500 $18,150 $13,750 $16,500 $17,600 $17,600 $17,600 $19,800

AUTOMATICS World MD 3060/3560 $4,400 World MD 3060PR/3560 From $3,850 PR PTO with retarder New $8,250 World HD 4560P PTO Spec $11,000 2000 Series $4,400 B400 Bus Spec $6,000 B400R Retarder Spec $7,150 B500R Retarder Spec $11,000 AT545 Low Kms $2,200 MT643 Low kms $3,300 MT653 Low kms $3,300 MTB653 with Retarders $6,050 MT654 As New $6,050 HT740 Ex US Army $8,250 HT754 low Hours $9,350 HT754 With Retarder $11,000 HT750 DRD low Km $9,750 Various adaptors available

ALLIS CHALMERS Allis Chalmers New T3500 2800

$7,500 $4000

Case/Cummins Equivilent

$CALL

CASE

ALLDIESELS WARRANTY

DSC/DS9 Various DC9 5cyl Low Kms DS11 360 & 380hp DSC12 420hp Electronic Low Ks DT12 470hp & 480 EGR DS14 4 Series DS16.0 580hp Low Kms

$CALL $19,800 $13,750 $CALL $CALL $CALL $22,000

IVECO 9 Speed Transmission As new $3,850 Tector 6 Suit Eurocargo Euro 4 & 5 from $14,850 Tector 6 Rebuild $18,150 Cursor 8 310-360hp Euro 4 & 5 from $13,750 Cursor 10 380-450hp Euro 4 & 5 from $15,400 Curso 13 400-560hp Euro 4 & 5 from $18,150

MERCEDES OM364A OM407 Bus Specs OM422 V8 250hp OM447 Bus OM447 Turbo M904LA Bus OM902LA adblue OM906LA From OM926LA From OM457 Bus OM460 Freightliner from ATEGO 6 V. Low Km from

$6,050 $3,850 $9,350 $11,000 $13,750 $CALL $14,000 $11,000 $13,750 $17,050 $13,750 $11,000

We have a huge range of industrial powerpacks in stock for immediate dispatch, ranging from 80hp all the way up to 1,500 hp.

CATERPILLAR CUMMINS 3516 1,500hp 400 hours 3054 85hp low hours 3056 aftercooled 180hp 3126 200hp C6.6 200hp 600 hours C7 300hp C9 335hp C11 400hp C13 440hp 800 hours C15 550hp C15 540hp 1500hours 3306 DI 300hp 3406C 460hp 3406E 660hp

$275,000 $7,700 $17,600 $19,250 $19,800 $27,500 $20,000 $25,000 $45,000 $30,800 $45,000 $19,800 $27,500 $27,500

JOHN DEERE 6081HF070 250hp 4329D Turbo

$19,800 $8,500

4BTA on trailor v. low hrs 6BTA 160hp 6CTA 250 hp ISB 260hp low hrs QSC 300hp QSL rebuilt N14 Mechanical 475hp QSX15 rebuilt

$11,000 $14,500 $15,400 $18,375 $24,200 $CALL $27,500 $CALL

DETROIT Detroit 8V71 Turbo Detroit 12V71TT

$16,500 $CALL

PERKINS 1104 Turbo 1106 180hp

$7,700 $14,500

VOLVO

DETROIT 6V53 Dyno Run As New 4.71 Low Hrs 4.71 Turbo Low Hrs 6.71 Inline 6V71 Truck and industrial 8V71 Low Miles 8V71 Turbo 12V71 Twin Turbo 6V92TA from 6V92TA In-chassis Rebuild 8V92 DDEC 2 Ex F/Truck 8V92TA Industrial as New 8V92TA Silver near New 8V92TA Electronic Low Miles Series 60 DDEC 2 Series 60 12.7 500hp Series 60 14.0 DD15

$9,350 $7,700 $7,150 $7,050 $CALL $9,350 $CALL $CALL $10,450 $15,950 $13,750 $18,500 $13,750 $13,750 $CALL $13,750 $CALL $19,250

DO824 Low Km DO826 Low Km DO836 Electronic from DO836 Common Rail D2866 D287 D2676 Common Rail

$7,150 $9,350 $9,900 $16,500 $13,750 $13,750 $22,00

MAN

DEUTZ F3L912 F4L912 Suit Rebuild F5L912 Suit Rebuild F6L413F

$6,600 $3,300 $3,300 $CALL

ONAN Onan 9hp Rebuilt

$2,750

TD61F $8,500 TD63 $9,350 D6A Low Km $9,350 D6B $10,450 TD71 Low Km $9,350 TD73 Low Km $9,350 D7A Mechanical $9,350 D7B Mechanical $10,450 D7C Electric Gov. Low Km $13,750 D7C Rebuild suit FM7 $17,600 D7E suit FE Euro 4 & 5 $14,850 D12A suit FH12 $14,400 D12D 420hp Low km $18,700 D12D 460hp $19,800 D12D 500hp $CALL D9A Suit FM Euro 4 $19,800 D9B Suit FM Euro 5 $19,800 D11C Suit FM Euro 5 $19,250 D13A Suit FH/FM $22,000 D13C Suit FH/FM Euro 5 $23,100 D13K Suit FH/FM Euro 6 very low miles $44,000

CUMMINS N14 MECHANICAL 475HP

AIR COMPRESSORS $49,500

Sullivan Palatek 900CFM only 3,800hrs.

Sullair 900XHH/1150XH 1,150CFM 1,700hrs

MACK E6-350 Two Valve E7-350 Mechanical E7-427 V-Mac E7-454 V-Mac E7 4 Valve V-Mac

$11,0000 $14,950 $16,000 $16,225 $16,225

STEER DRIVE AXLES

Assorted Axles

$CALL

BLADDER TANKS New 3,000 Gal. Trailable, complete with tiedowns. Suit potable water $5,500 New 5000 Gal Trailerable $5,500

LISTER

SR3 19.5 hp LPW4 Power Pack 40hp

$3,300 $4,235

$88,000

INTERNATIONAL DT466 from DT466 Ex Firetruck 530E Electronic Low Kms

SPECIALISING IN AMERICAN AND EUROPEAN DIESELS Cant find what you are looking for? Give us a call NEW STOCK ARRIVING DAILY. www.alldiesels.com | info@alldiesels.com Head office: 18 Jade drive Molendinar, Gold Coast QLD 4221

$8,250 $9,350 $10,500

TRANSFER CASES Kaiser Rockwell From

NEW, REBUILT AND USED MOTORS. HUNDREDS OF ENGINES WRECKED FOR SPARES

call 07 5597 0077 or text 0419 515 551

AD-591996311.als - Base Edition 76

POWERPACKS

SCANIA $26,950 $CALL $14,850 $17,050 $15,950 $CALL $CALL $CALL $CALL $11,000 $CALL $CALL $9,350 $CALL $11,000 $CALL $5,000 $CALL $14,850 $CALL $14,850 $15,950 $15,950 $14,500 $18,700 $8,250

PERKINS 6.354 Naturally Aspirated 4.108 Rebuilt 4 Cyl Various 4.236 Suit Rebuild 3054 Low hours

PACCAR 4 CYL PACCAR 6 CYL from PACCAR 6.7 CYL NEW 430hp Mechanical 280hp Electronic 430hp Electronic Ex 85CF 430hp Electronic Ex 95 XF 480hp Electronic 530hp Electronic

NEW STOCK ARRIVING

$3,850 $2,500

PRICES INCLUDE GST

FFM-FP-5013171-CS-398

ALL MAJOR BRANDS

5/5/21 1:02 pm

Wrights Tractor Sales & Service & Wrecking Chalkhill Road, McLaren Vale S.A. 5171 Sales (08) 8323 8795 Wrecking (08) 8323 8745 Office (08) 8323 8705 IN BUSINESS FOR MORE Fax: (08) 8323 9165, Mobile: 0419 820 318 THAN 35 YEARS SELLING

SHIBAURA SE7300 TURBO TRACTOR 2 wheel drive, front end loader & forks, approximately 3,200 hours indicated, power steering, 73 horsepower approximately, as traded * PRICE INCLUDES GST. Phone John 08 83238795, Richard - 0419 820318. 6837. TA1049634. $11,850 INCL GST

BOBCAT 328G EXCAVATOR (rubber tracked), 3 cylinder diesel, serial no: 284211534, engine no: 04N0777, approximately 2,730 hours indicated, quick release bucket, 4 post canopy, swivel boom, levelling blade, hammer piping, 950mm Mud Bucket, excellent condition, approximately 3.5 tonne. 6751. $34,500 INCL GST TA1034628.

FIAT CRAWLER TRACTOR 605C 4 cylinder diesel, 3 point linkage, 65 horsepower approximately, tracks good bushes turned, roll frame & roof, remote hydraulics, nudge bar, gears 6 forward & 2 reverse, approximately 2,400 hours indicated. * PRICE INCLUDES GST. John - 08 8323 8795, Richard - 0419 820318, wrightstractors@bigpond.com. 6910. TA1076658. $27,000 INCL GST

MASSEY FERGUSON 135 TRACTOR 2 wheel drive, approximately 6,400 hours indicated, roll frame & roof, 45 horsepower approximately * price includes gst.

6724. TA1015626. $10,450 INCL GST

IMANTS ROTOK.R6.MD.R17 ROTOKNIFE Lawn aerator *price includes gst. 6630. $9,850 INCL GST TA964931.

KUBOTA B7200 TRACTOR 4 wheel drive, 21 horsepower approximately, 1,024 approx. hours indicated. * PRICE INCLUDES GST. John - 08 8323 8795, Richard 0419 820318, wrightstractors@bigpond.com. 6892. TA1070341. $10,450 INCL GST

HORWOOD BAGSHAW BLADE PLOUGH trailing, with culter, hydraulic ram & stand, good order * PRICE INCLUDES GST. John 08 8323 8795, Richard 0419 820 318, wrightstractors@bigpond.com. 6878. TA1059436. $5,800 INCL GST

PLUS 1 WITH FRONT MOUNTED FORK

PLUS ANOTHER means we have another one for $12,850

ALSO IN STOCK 3PL 3 TYNE

JOHN DEERE 3320 TRACTOR (FITTING FRONT END LOADER) year approx 2013. 4 wheel drive, 4 cylinder diesel, serial no: 1LV3320HCBH7406, 3 point linkage, airconditioning, enclosed cab, ROPS, approximately 3,427 hours indicated/33 horsepower * PRICE INCLUDES GST. Phone John 08 8323 8795, Richard - 0419 820318, wrightstractors@bigpond.com. 6755. TA1037953. $37,850 INCL GST

FARMI CH260 MULCHER/CHIPPER 3 point linkage, serial no: 3293800, feed choke 320mm, circa 2007, made in Finland. 6862. TA1067757. $16,750 INCL GST

NEW HOLLAND T4050 TRACTOR 4 wheel drive, year approximately 2013, air con cab, 1 owner, tyres 75% all round, 97 horsepower approximately, excellent condition throughout. 6838. TA1050651. $33,450 INCL GST

YARD MACHINES 742 SRL RIDE ON MOWER 20 horsepower approximately, new battery, heavy duty machine, excellent condition. * PRICE INCLUDES GST. John - 08 8323 8795, Richard - 0419 820318, wrightstractors@bigpond.com. 6897. $2,350 INCL GST TA1071413.

FORD NEW HOLLAND 5640 TRACTOR 2 wheel drive, challenge self levelling front end loader, front forks & bucket, air conditioned cab, 3 point linkage, approximately 75 horsepower, exceptional condition no rust, ex airport. 6832. $35,000 INCL GST TA1049428.

SICMA COSMAG ROTARY HOE Plus many other rotary hoes in stock. S1820. $4,650 INCL GST TA949345.

DITCH WITCH 8020 CHAIN TRENCHER 4 cylinder diesel, serial no: 5J0190, approximately 1,500 hours showing, fitted with back fill blade, auxillary hydraulics, counter weights, open cabin, pneumatic tyres, ROPS, 80 horsepower approximately, John Deere motor, 4 wheel steer, front cable reel holder, ready to work. 6727. TA1017219. $34,500 INCL GST

CONNOR SHEA SEEDERS 14 Row disc super seeder trailing PRICES INCLUDE GST Phone John 08 8323 8795, Richard 0419 820 318. S2025. TA1029395. $10,500

NEW HOLLAND MC28 FRONT MOUNT MOWER 4 WHEEL DRIVE 3 cylinder diesel, serial no: TE20329, engine no: J843-87335, approximately 932 hours indicated, hydrostatic transmission, 1900mm slashing deck, PTO, pneumatic tyres, ROPS, ex council. 6828. TA1048646. $16,950 INCL GST

HOWARD EHD 7' SLASHER extra heavy duty, twin depth wheels, galvanised, 3 point linkage, excellent condition, ready to go. (2 OF) $7,950 EACH. Price includes gst. 6645. TA982110. $7,950 INC GST

VERMEER V3550A TRENCHER twin cylinder Deutz, Vin No: 1VRS072P8V1000390, diesel, front blade & rear chain, approximately 614 hours indicated, tyres excellent, unit in excellent condition. 6818. TA1044539. $28,950 INCL GST

CASE IH JX70U TRACTOR WRIGHTS TRACTORS PHONE 08 8323 8795 4 wheel drive, powered by Iveco 4 cylinder diesel engine, air conditioning, enclosed cab, tow bar, 3 point linkage, power take off, AUX hydraulics, 4 speed high/low, approx.

74hp, immaculate condition, approximately 6,159 hours indicated, width 1900 at tyres, 2040 at guards, Front End Loader fitted * price includes gst.

Phone John - 08 8323 8795. Richard - 0419 820318. 6337. TA847556. $39,500 INCL GST

JOHN DEERE 5065M TRACTOR year approx. 2011, 4 wheel drive, diesel, serial no: 1LV5065MPBJ3472255, engine no: 347255, approximately 4,493 hours indicated, 3 point linkage, air conditioning, enclosed cab, radio/cd, radio UHF/VHF, ROPS (FRONT WEIGHTS NOT INCLUDED), approximately 91 horsepower. 6754. $44,000 INCL GST TA1037949.

BONNE SWEEPER/ROAD BROOM HYDRAULIC DRIVE WITH CONTROLS 3 point linkage, hydraulic drive, with controls, to be serviced. 6877. TA1059344. $7,950 INCL GST

JOHN DEERE 5300 TRACTOR WRIGHTS TRACTORS PHONE 08 8323 8795 4 wheel drive, fitted front end loader, ROPS frame, roof, tyres as new, 3 point linkage, approximately 50 horsepower. 6579. TA932038. $34,000 INCL GST

SEVERAL OF, VARIOUS SIZES

MASSEY FERGUSON 240 TRACTOR WITH FEL 2 wheel drive, front end loader, roll frame, 3 point linkage, full width bucket double acting all round, approximately 3,100 hours indicated, vin no: 1004, engine no: 261165, 8 speed manual, 45 horsepower approximately. 6761. TA1039017. $21,950 INCL GST

JOHN DEERE 2140 TRACTOR WITH FRONT END LOADER 4 wheel drive, approximately 4,600 hours indicated, 4 new tyres, 3 point linkage, approximately 85 horsepower, original & clean * PRICE INCLUDES GST. Phone John 08 8323 8795, Richard 0419 820318. 6820. TA1046983. $29,850 INCL GST

TYRES LARGE RANGE OF TYRES, MANY DIFFERENT SIZES HUGELY DISCOUNTED! Richard - 0419 820318. S2186. TA1066749.

POA

FORD 2000 TRACTOR 2 wheel drive, 3 cylinder diesel, Front End Loader, 34 horsepower approximately, tyres excellent, original & tidy, ready to go. * PRICE INCLUDES GST. Phone John 08 8323 8795, Richard 0419 820318. wrightstractors@bigpond.com. 6902. TA1073035. $13,850 INCL GST

JOHN DEERE 5525 TRACTOR year approx. 2010, 4 wheel drive, serial no: LV5525R453794, engine no: PE4045T716512, approximately 5,400 hours indicated, ex Council, enclosed cab, 12 x 11 power/reverser transmission, 2 rear remotes, 4 cylinder diesel, 540 & 540E PTO, Ag tyres all round, rotating beacon, approximately 65 horsepower. Phone John 08 8323 8795, Richard - 0419 820 318.

6758. TA1038825. $39,500 INCL GST

WRIGHTS TRACTORS McLAREN VALE SA

WRIGHTS TRACTOR WRECKERS McLAREN VALE SA AD-591996311.als - Base Edition 77

WRIGHTS TRACTORS McLAREN VALE SA

CONNOR SHEA 10 ROW SUPER SEEDER 3 POINT LINKAGE super & seed, 3 point linkage, steel wheels, serviced & ready to go. * PRICE INCLUDES GST. John - 08 8323 8795, Richard - 0419 820318, wrightstractors@bigpond.com. 6929. $11,850 INCL GST TA1078632.

FFM-FP-5011376-B

KEYLESS ELECTRIC CODE

FOR FULL LISTING OF TRACTORS & MACHINERY, NEW PARTS & ACCESSORIES

WRIGHTS TRACTOR WRECKERS McLAREN VALE SA

WRIGHTS TRACTOR WRECKERS McLAREN VALE SA

www.wrightstractors.com.au

WRIGHTS TRACTOR WRECKERS McLAREN VALE SA

WRIGHTS TRACTORS McLAREN VALE SA

AUSTRALIA WIDE

WRIGHTS TRACTORS McLAREN VALE SA

WRIGHTS TRACTOR WRECKERS McLAREN VALE SA

Email: wrightstractors@bigpond.com

WRIGHTS TRACTOR WRECKERS McLAREN VALE SA

WRIGHTS TRACTORS McLAREN VALE SA

STOCKIST & DISTRIBUTOR FOR SA.

6/5/21 8:03 am

78 TradeFarmMachinery.com.au

37 Cornelia Creek Road Echuca 3564

92 Karook St Cobram 3644

Tel: (03) 5482 2788

Tel: (03) 5871 3333

A/H Damien Trencher 0428 822 788

A/H Mario Mete 0438 389 916

DUNCAN MK3 RENOVATOR pasture renovator, 11ft 6 inch sowing width, 23 tine new tyres, at our Cobram dealership 0358713333. S480. TA1081873. $30,800

AMAZONE CATROS 4001 4 meter wide multi disc, three point linkage, packer roller, new discs to be fitted, at our Echuca dealership 0354822788. S479. TA1081717. $13,200

NEW HOLLAND TSA100 4 cylinder, 6542 hrs, 2 sets of remotes, 460/85R34 rear tyres, 380/85R24 front tyres, 100 hp, Quicke Q950 loader, fitted with soft ride, 2.1 meter bucket, at our ECHUCA dealership 03 5482 2788.

S468. TA1071806. $52,800

NEW HOLLAND CR8090 CR 2012, Smarttrax, 1940e & 1264r hrs, optispread chopper, PSD, class 8, Macdon D60 40ft draper front, located at Shepparton. FINANCE RATE OFFER from 1.99% *conditions apply. S352.

TA930781. $396,000

NEW HOLLAND CR9080 2009, 83C 40ft draper front (Macdon) on trailer, 2724e & 1971r hrs, twin 22" rotors, MAV chopper, singles. FINANCE RATE OFFER from 1.99% *conditions apply. S353. TA930864. $308,000

ENFORCER M SERIES 35 3.5T, 4WD diesel forklift, 50.1 engine hrs. Rough terrain forklift, 2018 model. 3500kg lift capacity, 3 stage mast, side shift. Comfort-class suspension seat, scales. At Shepparton dealership. S413.

TA1002745. $49,500

CASE PTX600 AIRSEEDER BAR tillage bar, 9 inch spacings, 39 tines, 8.8 meters sowing, single shoot, Ag Master harrows, gang v press wheels, Case ADX 2180 air tank, 6343 lt tank, 60/40 split, single shoot, variable drive, 4 sets of rollers, ECHUCA 03 5482 2788. S471.

TA1071809. $88,000

NEW HOLLAND H7230 Trailing Mower Conditioner, two point swivel linkage hitch, 540 pto, rubber rollers, new skids, going through workshop. At our ECHUCA YARD. Contact 03 5482 2788. S472. TA1076780. $28,600

FFM-HH-5011691-A

For our full list of available equipment please visit: http://echuca-rural.tradefarmmachinery.com.au/ WEBSITE UPDATED DAILY http://www.echucarural.com.au

(03) 5191 9369 RAY MASSARO 0417 887 718 LUKE MASSARO 0448 024 461

www.massaromotors.com.au KUBOTA RTV-XG850 Sidekick 48HP Petrol 64km/h Top Speed CVT Plus transmission.

S487. TA1079656. $23,990

KUBOTA RTV-X1100C Fully enclosed cab with heater & air cond, 2 range Hydrostatic trans with dynamic braking, Roll down windows and Hydraulic tipping tray.

S480. TA1075512. $19,990

KUBOTA PH2301 New 3 metre power harrow, 575mm Packer Roller.

S454. TA1051093. $26,990

ISEKI SX55 Tractor 4cyl Diesel Loader.

S489. TA1080906. $17,990

MASSEY FERGUSON 65 Tractor Price Includes Slasher.

S490. TA1080909. $9,990

CASE 1190 Tractor Fully enclosed cab 2.7L 3-cyl diesel Hydrostatic power steering.

S368. TA1027176. $12,000

JOHN DEERE F1145 Deck Mower 3 cyl Diesel Hydrostatic Transmission 4WD. S491. TA1080914. $9,990

UNKNOWN KOMATSU fork lift.

S477. TA1070014. $5,500

Large range of New & Used Machinery in Stock Located at 2-6 BRIDLE ROAD, MORWELL VIC 3840

AD-591996311.als - Base Edition 78

FFM-HH-5006851-C

JOHN DEERE 6130 High Clear, full cab with air conditioning, 66" centres.

S466. TA1062779. $38,990

5/5/21 9:52 am

TradeFarmMachinery.com.au 79

02 6725 4617

ruralwrecking.com.au

parts@ruralwrecking.com.au 337 Oakwood Road, Inverell NSW 2360 ABN: 48 053 335 667

WANTED TO BUY TRACTORS FOR WRECKING

Parts available for most makes and models of tractors CASE

585, 595, 685, 695, 800, 830, 832, 870 2WD, 885, 895, 900, 930, 932, 956, 970, 1030, 1032, 1070, 1194, 1270, 1370, 1390, 1394, 1594, 1690, 2090, 2094, 2096, 2290, 2290, 2294, 2390, 2394, 2470, 2590, 2594, 2670, 2870, 3394, 3594, 4230, 4496, 4694, 4994, 7110, CVX 170, MAGNUM 275, MAGNUM 275, MAGNUM 290, MAGNUM 305, MX80C, MX255, MX285, PUMA, STX 375 QUADTRACK, STX425, STX440 QUADTRACK, STX450, STX485, STX500

CASE IH

1896, 4690, 4890, 4894, 5120, 5130, 5140, 5150, 7120, 7130, 7140, 7150, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 9130, 9150, 9170, 9180, 9250, 9260, 9280, 9350, 9370 QUADTRACK, 9380 QUADTRACK, 9390, MX90, MX130, MX135, MX230, MX240, MX270, MXM190, STX375, STX440

CATERPILLAR

CHALLENGER SERIES – 35, 45, 55, 65, 65C, 75, 75C, 75E, 85C, 85D, 95E, 65E TRACK MACHINE, MT765D

FORD

3000, 3610, 4000, 4600, 4610, 5000, 5610, 5640, 6000, 6600, 6610, 6700, 6810, 7000, 7600, 7700, 7710, 7840, 8000, 8210, 8230, 8340, 8401, 8600, 8700, 9000, 9600, 9700,, TW5, TW10, TW15, TW20, TW25,

INTERNATIONAL

STEIGER

385, 414, 434, 444, 484, 514, 554, 564, 574, 585, 624, 660, 674, 686, 696, 706, 756,766, 786, 856, 866, 885, 886, 956, 976, 986, 1056, 1066, 1086, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788, 844S, AW6, AW7, AWD6, AWD7, B250, B275, W6, W7,

KP525, KP 1350, KP1325, KP1400, BEARCAT 3 & 4, COUGAR 2 & 4 CM250, PANTHER 2, PANTHER 3 ST310 & ST325, PANTHER 4 CM325, TIGER ST470,

JOHN DEERE

ALSO WRECKING VARIOUS MODELS OF

6170R, 950, 1050, 1130, 1140, 1640, 1750, 2010, 2020, 2030,2040, 2120, 2130, 2140, 2250, 2450, 2650, 2850, 3010, 3020, 3120, 3130, 3140, 3350, 3640, 3650, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 5310, 5515, 5300, 6030, 6200, 6300, 6310, 6320, 6330, 6400, 6410, 6620, 6630 Premium, 7210, 7510, 7520, 7600, 7610, 7700, 7800, 7810, 7920, 8100, 8200, 8285R, 8300, 8310, 8330, 8345RT, 8400, 8400 TRACK, 8410, 8430, 8360RT, 8440, 8450, 8520, 8520T, 8530, 8630, 8640, 8650, 8760, 8770, 8850, 8960, 8970, 9400, 9410R, 9420T, 9430T

VERSATILE

500, 700, 800, 835, 855, 875, 895, 900, 935, 945, 946, 950, 956, 975, 976, 1150, 1156

CHAMBERLAIN, DEUTZ FAHR, FIAT, JCB, LAMBORGHINI, MASSEY FERGUSON, MCCORMICK, SAME – CALL US TO ENQUIRE

NEW HOLLAND

7840, 8430, 8560, 8870, 8970, 9482, 9682, 9860, 9880, 9882, 9482, 9484, G210, G240, L85, L95, T6020, T7030, TG230, TG235, TG255, TG285, TJ425, TJ450, TM125, TM135, TM195, TN55D, TN95F, TS100, TS100A, TS110A, TS125A, T9060



Follow us on Facebook to keep up to date with new stock that’s regularly coming in.

@ruralwrecking

FFM-FP-5211221-TS-396

Wrecking largest range of tractors in Northern NSW

AD-591996311.als - Base Edition 79

5/5/21 9:52 am

MISSED OUT ON SEASON 2?

CATCH UP NOW ONLINE!

4389_MM S2 digital TFM DPS CHANNEL 10.indd 1

5/05/2021 10:49:11 AM

Seasons 1 & 2 now available online 10play.com.au/ mighty-machines

4389_MM S2 digital TFM DPS CHANNEL 10.indd 2

5/05/2021 10:49:14 AM

CASE IH CVX 160 2012, 160 CVX Puma, FWA/4WD Cab - Tractor only HP 160, has boost, CVT transmission 4500 hours. Located Tasmania, call Tas Mundy 0400 077953. ZCBP53176. TA1079111. $99,000

CASE IH PUMA 165 2014, FWA/4WD Cab - Tractor only, Hours: 8875, Eng Power: 165 Hp Boosted Max 210 Hp, VIN/Serial #: ZCBH52967. New Front tyres, Tractor has been throught the workshop and is ready. ZCBH52967. TA1034669. $67,000

KUBOTA M135GX 2017, 3175 Hrs, Front axle suspension, Front fenders, Intelli shift 24x24 F/R Transmission. Row Crop tyres. Currently going through the workshop to be ready for immediate delivery. SN54040. TA1076116. $66,000

FIAT FD9 Allis - bulldozer, Tracked, 13000 hours.

Located Tasmania, Call Ryan Bean 0437 164183.

D9B1FM040282. TA1077047. $35,000

ALPEGO FZ-300 E BASE 2017, 3 metre cage/Roller.

Located Tasmania Call Simon Maloney 0419 348023.

000041702. TA1077190. $25,000

LELY MULTIDISC 400 2006, Folding 4 metre SPEED DISCS with Air seeder and crumbler rollers. Located Tasmania, Call Simon Maloney 0419 348023.

06538112. TA1077058. $26,500

LELY OVERUM 6 BURROW D623 Blade Plough.

Located Longford, call Tas 0400 077953.

D698HL525230111. TA1077057. $12,000

VOLVO L40 2001, L40B, FWA- Tractor/loader, Hours: 6152, HP 100. Located Longford Tasmania, Call Ryan Bean 0437 164183. L40BD1911074. TA1065912. $47,000

CASE IH DCX131 2003, Mower conditioner 4m steel rollers with travel buggy. Located Tasmania, Call Tas Mundy 0400 077953. NCA0096353. TA1077189. $25,000

FELLA SM310 FZ SM 310 Front and Rear 2011, SM310FZ & SM310TL, 6.2m overall cut. To be fitted with full set of new blades. VIN/Serial #:. CDA00317.

TA1065699. $14,000

KUHN GMD 310F 2018, 3 metre flail Mower Conditioner, "DEMO MODEL". Lpcated Tasmania, Call Simon Maloney 01419 348023. A0955. TA1005568. $25,000

SAMASZ KDTC341 2020, Mower 3.4m Cut, Shaft drive, Spring flotation, Hydraulic breakaway. As new condition, RRP $26,000.00 Save $$$ on the best mower on the market today. 0055204. TA1077050. $19,800

KUHN EL 201-400 2008, Rotary Hoe, Brand new packer roller. Located in Tasmania Longford, Call Simon Maloney 0419 348 023. 200189. TA1039344. $13,200

MASCHIO PANTERA 470 2010, Folding Rotary Hoe. Located Trafalgar, Call Andrew 0408 368 326.

059720011. TA1064588. $28,000

SIPMA ZK650 WIR 2018, Rakes 6.5 metre rake, one season old. Located Trafalgar, Call Ron Hampton 0412 544077. 00036. TA1051162. $24,500

VICON RV1601 MK2, Round Baler/Wrapper Combination paddock ready. Located Trafalagar, Call Andrew Noonan 0412 610903. RW0000033. TA1062292. $55,000

WELGER RP435 2008, Master, Round Baler, Bales: 24000, NET AND KNIVES. VIN/Serial #:. 175515528.

TA961700. $27,000

LELY V160 Round Baler, Netwrap. Located Tasmania call Simon Maloney 0419 348023. 175800272.

TA1077054. $22,000

GALLIGNANI GAV9 V9 Round Baler, net wrap, V9 TM3. TBAV9TM3. TA1077048. $16,500

NEW HOLLAND 650 baler, Round Baler, netwrap.

Located Tasmania, Call Simon Maloney 0419 348023. 910943. TA1077051. $8,500

TRAFALGAR 8-14 Saleyards Road, Trafalgar, VIC 3824 Tel: 03 5633 1588

MAFFRA 2 Empire Place, Maffra, VIC 3860 Tel: 03 5141 1700

LEONGATHA 120 Horn Street, Leongatha, VIC 3953 Tel: 0475 004 436

LONGFORD 6-8 Wellington Street, Longford, TAS 7301 Tel: 03 6391 2411

Email: admin@ttmi.com.au

ttmi.com.au

 ttmi.gippsland

 ttmi.asmania

AD-591996311.als - Base Edition 82

FFM-FP-5099410-A

82 TradeFarmMachinery.com.au

6/5/21 8:33 am

TradeFarmMachinery.com.au 83

Hado Pty Ltd ATF Intersales Unit Trust ABN 64 160 069 925 / ACN 001373 726 80 Hoskins St, PO Box 178, Temora NSW 2666 Ph: 02 6977 1933 270-272 Hammond Ave, Wagga Wagga NSW 2650 Ph: 02 6951 5515 8-14 Oakes Road, Griffith NSW 2680 Ph: 02 6962 6831

www.intersales.com.au - admin.temora@intersales.com.au

CASE IH 8120

2011, 2387 eng hrs, 1828 rot hrs, Chopper, dual 620/70r42 drive tyres, 40%, 600/65r28 steer 60%, pro 600 yield and moisture, drive lights, UHF, radio, Trimble 500/ Ez steer, no front, To be serviced. YBG212754. TA1078948.

$242,000

CASE IH 4430

2016, Case IH 4430 Aim Command pro , 6000l 36.5 MT, approx. 1750 eng hrs. 760 spray hrs, 480/80r42 tyres and guards 50%, auto fold and height control, RTX 372 receiver, Nav, Pro 700 auto steer, 5 height sensors, auto grease, Chemical inductor, recirculation and flush system fitted, banjo 2 hydraulic fill pump, to be serviced, due in end December 2020. YGT042638. TA1066661.

$418,000

CASE IH 8240 with 40ft D65 and trailer 2016, 1495 eng, 1094 rot, 40ft D65 Macdon draper front, cross auger 800/70r38 drive 80%, 600/65r28 steer 60%, 1 x camera, Nav, 372 RTX, pro 700 auto steer, folding grain tank extensions, radio, UHF, HID lights, folding unloader auger, Intersales 4 axle trailer. YGG231354,. TA1078950. $506,000

CASE IH 8120 with 45ft 2152 and trailer 2011, 3114 eng hrs, 2584 rot hrs, dual 620/70r42 drive tyres, 60%, 600/65r28 steer 90%, pro 600 yield and moisture, 45ft 2152 draper front, cross auger 4 axle Intersales trailer, guards, lights. Steer ready only. YBG212313,.

TA1078949. $247,500

CASE IH 7230 40ft 2152 and trailer 2013, 1796 Eng, 1534 Rot, 800/70R38 drive, 620/70r26 steer tyres, rock trap, fold unload auger, self-level sieves, CVT direct drive rotor, power grain tank covers, UHF, radio, pro 700, nav, 372 RTX, 40ft 2152 draper front, P/U reel, 4 axle Intersales trailer. YDG219585. TA1078947. $385,000

MACDON M205 2017, 2016 build, 2017 model Macdon M205 windrower tractor, 3290 eng hrs, 2590 cutting hrs 600/65r28 drive tyres, 16.5l 16.1 casters, light bar side lights, UHF, radio, reversible console, Cummins eng, 40kmh transport speed. smit83. TA1076432. $121,000

MACDON R85 2016, 16ft mower conditioner, hydraulic drive, steel intermeshing conditioner rollers, forming shields, skids, tidy order shedded. mcrae832. TA1078448. $57,200

CASE IH 8240 D145 front and trailer 2017, 724 eng, 580rot 45ft D145 Macdon draper front, windrower ready, hrs, 800/70r38 drive 90%, 600/65r28 steer 90%, 3x camera, Nav, 372 RTX, pro 700 auto steer, HD transition cone, hard faced augers, rotor cover plates, radio, UHF, HID lights, folding unloader auger, cross auger.

YJG235706.. TA1078945. $660,000

CASE IH 7240 2017, 1232 eng, 1010 rot hrs, IF 800/70r38 drive 90%.

600/65r28 steer 90%, 3x camera, Nav, 372 RTX, pro 700 auto steer, hard faced augers, rotor cover plates,radio, UHF, HID lights, folding unloader auger, serviced. john83---. TA1078946. $396,000

NEW HOLLAND T8.435 T3435 2015, T8-435 Smartraxx. 1400 hours, Front Linkage High Spec Cabin. Steer Ready, Intelliview 4 screen, 5 rear remotes with joystick, rear Linkage with quick Hitch.420/85 238 Front and 18 inch rear tracks on 2.0m centres. Located in Griffith.

83304. TA1079055. $250,000

FLEXI COIL ST830 BAR & SC180BIN 34ft, 58 tynes, 350lb trips, 4 row finger harrows, single shoot, small seeds heads and hoses, wedge points and adaptors, New Holland Flexi-Coil SC180 THB trike air cart, PJ greens small seeds, hydraulic auger, A-1 condition. weck83.

TA1077378. $104,500

DIECI AGRI PLUS 40.7 2017, Just Traded, 2017 Dieci Agriplus 40.7 PS evo Telehandler. Complete with GP bucket and pallet forks. 1000 engine hours, 4 speed powershift, FPT Diesel Engine. A/c Cabin.

Extra Lighting UHF. Located In Griffith. xzc1561558. TA1058832. $110,000

FLEXI COIL PD5700/3850 PD5700/3850 2012, Parallellogram Precision Hoe Drill 60' (18.3mt) Width in 5 sections 12" spacings on 3 ranks, 5.6mt transport width 60 row units - Double shoot opener, Smooth profile packing wheel, individual depth control and fully adjustable breakout (275-55lb) from the cab seat Seeder is matched up with a Flexicoil 3850 tow behind Air Cart 3 bin 380bu Capacity (13,400lt) Split in litres 4,150/3,300/5950 Flexcontrol IV 254mm (10") Load/unload auger. 5700GOW. TA1029421. $198,000

HARDI UNKNOWN 7030 COMMANDER 7000 litre with 30m force boom. Hydraulic lift, fold and Wing Tilt. Single Nozzles, adjustable suspension axle, Hydraulic turn assist, Hardi 5500 controller. 3 inch Fill Hydraulic drive 464 pump. Mudguards and rear oversize sign kit.

20..8 r42 wheel gear. Sold as is Located in Griffith. $38,500 (INC).

0406004269. TA1080538. $38,500

JCB FASTRAC 3185 1998, 5,240 hrs, 1998 Model, Approx 185 HP, FWA /4WD, Front Tyres -520/70 R30 @ 10%, Rear Tyres Near New, 3 point Linkage, PTO, 3 Rear remotes, Passenger Seat, A/C, UHF, New Power Steering and Suspension Hydraulic Pump, Serviced-Engine Oil/Fuel/Air Filters Replaced, Light Bar. coe83. TA1076434. $50,600

CASE IH MAGNUM 305 2007, 8408 hrs, 480/80 R50 duals inner tyres 90% outer tyres 30%, 480/70 R34 front tyres 85%, front weights, linkage, uhf, radio, 4 hyd remotes, front axle suspension, no steer. gayn83. TA1077376. $82,500

CASE IH CVX1170 with loader 2009, 9000hrs, LSX challenge loader, 4 in 1 bucket, bale spike, electro 3 junction control, 50 KMH CVT trans, front axle and cab suspension, rear 3pt linkage, 540/540E 1000 pto, drawbar, 3 rear electro remotes, cruise control. To be serviced. 83298waer. TA1077377. $66,000 FFM-FP--5011483-D

CASE IH 7088 7088 2009, Combine. Base Unit only. 2915 Rotor Hours and 3884 Engine Hours. Front 900/60 R30 and rear 540/65 R30 50%. Full Preseason and service done. Pro 600 Screen, Ezi-steer 500 steering system, Camera kit with Monitor. Tidy unit.

Located In Griffith. Y9G001425. TA1066305. $125,000

AD-591996311.als - Base Edition 83

6/5/21 8:34 am

84 TradeFarmMachinery.com.au

COLAC | WARRNAMBOOL | BALLARAT 357 Princes Highway, Colac West, Vic, 3250

SEED HAWK SH40-10\45 45 series air seeder, 40ft work width. 12.2 mtr 10 inch spacing, seedhawk parallel tine seeding system, air kit. HC2096.

TA1081753. $148,500

VADERSTAD 400S RAPID 7400 Hectares, 5" spacings, 4m working width. Seed & Fertiliser. Good condition. HW398. TA1072932. $99,000

CLAAS ARION 650 C-MATIC 50km. Suspension all round. 4 remotes, auto grease to front suspension, 4 speed PTO. 08406-P. TA1059155. $149,000

AMAZONE ZAM 3000 ULTRA 3000 LTR twin disc spreader with cover, controller, 24 - 48 mt discs.

ZAM0080758. TA1026701. $15,000

VADERSTAD SH8010-30 Seed Hawk Air seeder SH8010-30 series. 9mtr working width 30ft, 10" spacing, 4000lt tank. Suit new buyer. Phone Justin 0419 009 328. CONMCI. TA1073254. $242,000

HARDI COMMANDER 5000 30m eagle boom. PTO speed 540. Good condition, AC 5500 controller. HW 433. TA1081720. $40,000

KUHN 5168 Twin auger with new blades 20 cu/ms capacity, front discharge conveyor. HW329.

TA1001950. $39,000

LELY RDC 445 Tornado round baler wrapper combo.

2015 model, only 22,000 bales, excellent condition. 6 x 4 bale size. Complete with knives. 4895.50.638.

TA1031390. $77,000

SULKY DPX28 2013 linkage spreader, 3000lt. Good condition. 13/DT01256. TA1025937. $10,000

HARDI NAVIGATOR 4000 4000lt x 24mt boom, 3 section control, granni pot, fast filler, 2015 model.

HC1714. TA961496. $37,000

AMAZONE 1501 spreader. 3pl, pto drive, speed 540, 2500 ltr capacity, 26 - 36 mt discs. Folding cover.

HC1984. TA1082085. $7,900

GILTRAP RF16 feed wagon, C/W scales, tandem axle, front conveyor. Side feed. Good order. HW464.

TA1081363. $31,000

BEAR CAT SC5540B Cat 1, 3pl hitch, 5" chipper capacity. PTO driven, 540 rpm, HP req 25 -45, 4 reversible blades and 36 shredding knives.

CONMOW. TA1081141. $3,700

AMAZONE CIRRUS 6003-2C 10,500 ha. 5" spacing, loading auger, small seed box. Excellent condition.

HW458. TA1079397. $82,500

VALTRA N113 Air cab, 4wd, loader, power shuttle 40KPH. Front guards, bucket & froks. Serviced & ready to go. HC2071. TA1082086.

POA

SCOTT O’HANLON 0429 316 322 GREG HARRINGTON 0438 786 035

JAMIE DUNN 0427 469 400 TREVOR BANT 0459 469 456

FFM-HH-5166595-B

Colac 03 5231 6322 Warrnambool 03 5561 1733 Ballarat 03 5331 0177

www.claasharvestcentrecolac.com.au

Tim Harper 0429 578 881

Rocky River Ag Services Sales, Service & Parts ABN: 961 614 184 01

Ph 08 8636 2772

CASE IH 7140

FLEXI COIL 5500

lsmart@rockyriverag.com.au www.rockyriverag.com.au

CASE IH 7230

Axial flow combine, c/w 3152 40ft front, straw chopper & upper cross auger, CROP READY. 51026. TA971303.

Air drill, 60ft, 12" spacing, c/w double sowing kit, 350lb b/out, presswheels. 51097. TA1055134.

Axial Flow Combine, c/w 40ft 3152 Draper Front, Rocktrap, Straw chopper, good condition. 51054. TA988977.

$374,000

$91,300

$335,500

HARDI COMMANDER 7036

CASE IH 8120

CASE IH MAGNUM 290

7000Lt, 36m boom, c/w 363 pump, Trimble 750 monitor, Field IQ, 2006 model, good condition. 51127. TA1069781.

Axial Flow Combine, (Base unit only) c/w dual wheels, PRO600, straw chopper, CROP READY. 51029. TA942881.

c/w front & rear duals, powershift trans, 2011 model, good condition. 51138. TA1082064.

$66,000

$214,500

$148,500

FFM-HH-5012302-A

CRYSTAL BROOK SA

Brad Page 0428 833 193 • David Cliff 0427 859 960 • Lynton Smart 0427 859 967 • Tim Harper 0429 578 881

FFM 398 82-86.indd 84

6/5/21 8:40 am

TradeFarmMachinery.com.au 85

A ELS H C I M DONALD Ph. 5497 1203

MOAMA Ph. 5480 0731

BALLARAT Ph. 5336 4145

Terry 0427 971 203 Clinton 0407 108 407

Brad 0428 300 883 Terry 0427 971 203

Andrew 0429 364 745

MORRIS CONCEPT 2000 2002, 35' @ 9", 7130 trailed 2 bin, ssb, auger, p/wheels. AS1248. TA509568. $86,900

SIMPLICITY 9000TB3 2000, 9000 Litre, 3 Bin, Auger.

AS1517. TA1036085. $86,900

HORWOOD BAGSHAW AIRSEEDER COMBINATION 1997, Scaribar 36' @ 8.75", Streamline 4000 Li, 2 bin, spur gear drive. AS1489. TA1036083. $65,450

HORWOOD BAGSHAW UNKNOWN 4000 Streamline 1984, 2 bin, 4000 litre, spur gear drive. AS1250. TA534881. $27,500

NEW HOLLAND SC180 1998, 180 Bushel / 6343 Litre, 2 bin, castor quad, auger. AS1355. TA739946. $53,900

SIMPLICITY 4000DTR 1991, 5700 Litre, 2 bin, tow behind. AS1382. TA984613. $20,900

JANKE F500 UDD PLANTER 2004, 45'@12", banding, press wheels. AS1390. TA820146. $87,450

DIECI DEDALUS 28.7 2005, Poultry Pro, hydro, aircond, 6.3 metre x 2.8 tonne, 3676 hours. AS1477. TA970216. $65,450

EZEE-ON 3550 2003, 40' @ 10". AS822. TADPLIn107338. $53,900

4WD TRACTORS

BURDER 9000 FEL Kit – JCB 8250

FLEXICOIL 2640, 3 bin, trailed quad, auger

JCB 530-70FS, a/c, srs, 10000hrs, 7m x 3t

JCB 535-95, a/c, 4500hrs, 9.5m x 3.5t

CASE 480E Loader, a/c, 10000hrs

HORWOOD 4000 ELEC DRIVE, 2 bin trike, SSB

JCB 530-70FS SUPER, a/c, srs, 5470hrs, 7m x 3t

JCB 535-95C, a/c, 3850hrs, 9.5m x 3.5t

CASE 580E Backhoe Loader

SHEARER (EEZE ON) 2175, 5T Trike, SSB, auger

JCB 530-70FS SUPER, a/c, srs, 5500hrs, 7m x 3t

JCB 540-70FS SUPER, a/c, srs, 2000hrs, 7m x 4t

CIH MX 460/85R42 dual kit (80% tyres)

SIMPLICITY 2500DTR

JCB 530-70FS SUPER, a/c, srs, 6000hrs, 7m x 3t

JCB 540-70FS SUPER, a/c, srs, 6300hrs, 7m x 4t

JCB 155-65 FASTRAC, 150hp, 3PL, 8000hrs

JCB 155 ECO Skidsteer Loader, a/c, 290hrs

SIMPLICITY 4000TB

JCB 531-70CE, a/c, 5900hrs, 7m x 3.1t

JCB 185-65 FASTRAC, 185hp, 3PL, 4900hrs

JCB 3CX-2WD Backhoe Loader 7900hrs

SIMPLICITY 12000TQS2, SSB, auger

JCB 531-70CE, a/c, 7200hrs, 7m x 3.1t

JCB 185-65 FASTRAC, 185hp, 8000hrs

JCB 3CX-2WD Backhoe Loader, 12745hrs

TELEHANDLERS

JCB 531-70CS, a/c, 6850hrs, 7m x 3.1t

JCB 3185-65 FASTRAC, 185hp, 3PL, 8700hrs

JCB 4CX Backhoe Loader, a/c, 11000hrs

CAT TH336 AGRI, a/c, 2570hrs, 6m x 3.3t

JCB 531-70 AGRI, a/c, 3350hrs, 7m x 3.1t

JCB 3220-65 FASTRAC, 220hp, 3M Track, 3PL, 6990hrs

JCB 411HT Wheeled Loader, a/c, 2500hrs

CLAAS 7045 PLUS SCORPION, a/c, 3000hrs, 7.1m x 4.4t

JCB 531-70 AGRI, a/c, 3400hrs, 7m x 3.1t

JCB 3220-80 FASTRAC/SPREADER, 220hp, 11200hrs

JCB 8018CTS Excavator, 1.6T, 1100hrs

DIECI DEDALUS 28.7, a/c, 315hrs, 6.3m x 2.8t

JCB 531-70 AGRI, a/c, 4900hrs, 7m x 3.1t

JCB 3230-65 FASTRAC/SPREADER, 230hp, 5825hrs

JD H480 FEL Kit – 7000 Series

DIECI 30.9 AGRI, a/c, 3200hrs, 9m x 3t

JCB 531-70 AGRI, a/c, 6300hrs, 7m x 3.1t

JCB 541-70 AGRI SUPER, a/c, srs, 7250hrs, 7m x 4.1t

JCB 525-58FS, 6000hrs, 5.8m x 2.5t

JCB 531-70 AGRI, a/c, 8300hrs, 7m x 3.1t

JCB 541-70 AGRI SUPER, a/c, srs, 8900hrs, 7m x 4.1t

KOMATSU WA300-3E Wheeled Loader, 16000hrs

JCB 525-67FS, a/c, 7000hrs, 6.7m x 2.5t

JCB 531-70 AGRI, a/c, 11600hrs, 7m x 3.1t

JCB 541-70 T4i AGRI SUPER, a/c, srs, 3900hrs, 7m x 4.1t

SIMPLICITY Small Seeds Box suit 8200TB3

JCB 526-55, a/c, 10675hrs, 5.5m x 2.6t

JCB 531-70 AGRI, a/c, srs, 6300hrs, 7m x 3.1t

JCB 550-80 AGRI PLUS, a/c, srs, 2250hrs, 8m x 5t

VICTORY VL200 Wheeled Loader, 1385hrs

JCB 527-55, a/c, 2630hrs, 5.5m x 2.7t

JCB 531-70 AGRI SUPER, a/c, srs, 3000hrs, 7m x 3.1t

JLG 4013, a/c, 7700hrs, 13m x 4t

WCM 30 Wheeled Loader, 2800hrs

JCB 527-58 AGRI, a/c, 1000hrs, 5.8m x 2.7t

JCB 531-70 AGRI SUPER, a/c, srs, 3500hrs, 7m x 3.1t

MANITOU MVT628T, 4400hrs, 6.8m x 2.8t

COMBINES

JCB 527-58 AGRI, a/c, 1800hrs, 5.8m x 2.7t

JCB 531-70 AGRI SUPER, a/c, srs, 4770hrs, 7m x 3.1t

MANITOU MLT633TLS, a/c, 5500hrs, 6m x 3.3t

JCB 527-58 AGRI, a/c, 2950hrs, 5.8m x 2.7t

JCB 531-70 AGRI SUPER, a/c, srs, 5850hrs, 7m x 3.1t

JCB 527-58 AGRI, a/c, 5650hrs, 5.8m x 2.7t

JCB 531-70 AGRI SUPER, a/c, srs, 6000hrs, 7m x 3.1t

JCB 527-58 AGRI, a/c, 6775hrs, 5.8m x 2.7t

JCB 531-70 AGRI SUPER, a/c, srs, 6940hrs, 7m x 3.1t

JCB 527-58 T4i AGRI PLUS, a/c, 1000hrs, 5.8m x 2.7t

JCB 531-70 AGRI SUPER, a/c, srs, 7000hrs, 7m x 3.1t

JCB 155-65 FASTRAC, 150hp, 3PL, 5500hrs JCB 155-65 FASTRAC, 150hp, 3PL, 7300hrs

JCB 3230-80 FASTRAC/SPREADER, 230hp, 11000hrs

2WD TRACTORS IHC 5088, 150hp, 4750hrs

FWA TRACTORS CASE IH MAXXUM 130 / FEL, 130hp, 3PL, 2700hrs CASE IH MX170, 161hp, Fr & Rr 3PL – pto, 9500hrs CASE IH MX200, 200hp, 3PL, 8750hrs

KOMATSU PC78MR-6 Excavator, 7T, 3600hrs

CONNOR SHEA 14 Row Pasture Drill, coulters, roller

JCB 541-70 AGRI SUPER, a/c, srs, 3050hrs, 7m x 4.1t JCB 541-70 AGRI SUPER, a/c, srs, 4725hrs, 7m x 4.1t JCB 541-70 AGRI SUPER, a/c, srs, 5200hrs, 7m x 4.1t JCB 541-70 AGRI SUPER, a/c, srs, 5700hrs, 7m x 4.1t JCB 541-70 AGRI SUPER, a/c, srs, 6500hrs, 7m x 4.1t

MANITOU MT728-4, 7800hrs, 7m x 2.8t

DEUTZ AGROTRON TTV610 / FEL, 165hp, 2600hrs

BARS

FORD 6640SLE, 85hp, 3PL, 5100hrs

GASON 50’@10” Scaritill, Kelly rotary harrows

FORD 7710, 100hp, 3PL, 8650hrs

HORWOOD 20’ Scaribar, 10.5”

JCB 530-70, a/c, 6000hrs, 7m x 3t

JCB 531-70 AGRI SUPER, a/c, srs, 7100hrs, 7m x 3.1t

JCB 8250 FASTRAC, 260hp, 3PL, 3850hrs

JANKE F400 UDD Planter, 40’@12”

JCB 530-70, a/c, 6200hrs, 7m x 3t

JCB 531-70 AGRI SUPER, a/c, srs, 7160hrs, 7m x 3.1t

JOHN DEERE 6210 / FEL, 90hp, 3PL, 6700hrs

JANKE F500 UDD Planter, 40’@12”, coulters, p/wheels

JCB 530-70FS, a/c, srs, 3000hrs, 7m x 3t

JCB 531-70 AGRI SUPER, a/c, srs, 7200hrs, 7m x 3.1t

MERLO P40.7, a/c, 2800hrs, 7m x 4t

MISCELLANEOUS

JANKE F400 UDD Planter, 50’@12”, bdg, p/wheels

JCB 530-70FS, a/c, 6250hrs, 7m x 3t

JCB 531-70 AGRI SUPER, a/c, srs, 9800hrs, 7m x 3.1t

NEW HOLLAND LM630, a/c, 9600hrs, 6m x 3t

BLIGHTY ENG’ 30’ Rubber tyre Roller

JOHN DEERE 735 40’@10”, p/wheels

JCB 530-70FS, a/c, 7500hrs, 7m x 3t

JCB 531-70 T4i AGRI SUPER, a/c, srs, 4750hrs, 7m x 3.1t

NEW HOLLAND LM435A, a/c, 3000hrs, 6.8m x 3.1t

BROONS Combination Roller

AIR SEEDERS

JCB 530-70FS, a/c, srs 7000hrs, 7m x 3t

JCB 531-70 T4i AGRI SUPER, a/c, srs, 7200hrs, 7m x 3.1t

WEIDEMANN 4070CXT, a/c

MANITOU MLT731, a/c, 4200hrs, 7m x 3.1t MANITOU MLT731, a/c, 6000hrs, 7m x 3.1t MANITOU MT732, a/c, 4300hrs, 7m x 3.2t MANITOU MLT741-120LSU, a/c, 7100hrs, 7m x 4.1t

www.michaelsofdonald.com.au

AD-591996311.als - Base Edition 85

FFM-FP-5011792-B

IHC 3588 Snoopy, 167hp, 4800hrs

6/5/21 8:34 am

POOLE &

COBRAM FARM EQUIPMENT PTY LTD

Lyndoch Motors

Ph (03) 5872 1722 (03) 5872 1265 A/H (03) 5865 8262

Phone: (08) 8524 4140 Jeffrey Both: 0428 844 271 AH: (08) 8563 2387 SA Graham Ahrens: 0429 846 011 AH: (08) 8524 4309 SA Duncan McInereney AH: 0427 245 140

JACKSON

Lot 3, Murray Valley Highway PO Box 26, Cobram, Vic 3644

PTY LTD

86 TradeFarmMachinery.com.au

SPEED & WALPEUP

ACN 086 668 108

ABN 28 100 780 069

Visit our site: www.lyndochmotors.com.au email: sales@lyndochmotors.com.au

Ph: 03 9998 4998

MASSEY FERGUSON

CASE IH 8230 2012, r/trap, chopper, 40' 2152 draper c/w hyd. top link, float optimiser, levelling wheels & cross auger, pre season serviced 1608 s/hrs. S255. TA1082082. $352,000 MASSEY FERGUSON 5200-36 5200-36 pick up draper windrower On Behalf Of Client. S44. TA907089. $33,000

MASSEY FERGUSON 5200-30 30ft 5200 triple delivery Draper front in excellent condition.

S40. TA1059364.

POA

CASE IH 340 2012, Magnum 340 Ultimate powershift tractor, 520/85R46 dual rear, 480/70R34 dual front, 3 point linkage, 50 km/hr trans, 3900 hours. S254. TA1082081. $198,000

HARDI COMMANDER 5030 2003 Commander V 5000 Litre tank 30mtr boom 463 spray pump pilot controller triplet nozzles chemical hopper.

OBC. S47. TA1016214. $22,000

NEW HOLLAND H8080 Windrower with 15.5ft disc mower conditioner, Mow Max front, also 25ft draper end knives and trailer. S31. TA759375.

POA

CASE IH 4430 2012, Patriot sprayer with Aim Command, 6000 litre tank, 36.5 metre 7 section boom, auto steer with a Nav controller & 372 receiver, 13.6R42 tyres, boom prime & flush, hyd. banjo fill pump, has been workshop checked & serviced. S253. TA1082080. $242,000

TRACTORS

MASSEY FERGUSON 8680 350HP MF F.E.L. DUALS ..................................................................... COMING IN MASSEY FERGUSON 7715 DYNA 6 150HP MF F.E.L. LOW HOURS ................................................ COMING IN JOHN DEERE 6430 115HP FITTED WITH JD FRONT END LOADER ................................................. COMING IN MASSEY FERGUSON 100HP A/C CAB FRONT END LOADER LOW HOURS ...................................... COMING IN CASE MXM 190 190HP FWA A/C CAB FRONT END LOADER ..................................................................... POA MASSEY FERGUSON 6265 105hp FWA A/C Cab Quicke Loader ............................................................... POA NEW HOLLAND 8560 160HP Front linkage and pto a/c cab fwa ............................................................. POA MASSEY FERGUSON 5465 110 H.P. FWA A/C CAB one owner tractor ...................................................... POA MASSEY FERGUSON 6445 90 HP A/C Cab One owner tractor in excellent condition .............................. POA CASE MXM 175 177 HP FWA POWERSHIFT one owner ........................................................................... POA CASE MX 120 A/C CAB 120 HP FWA ........................................................................................................ POA MASSEY FERGUSON 6265 105hp FWA A/C Cab Burder Loader ............................................................. POA MF390 85HP Loader 4WD Shuttle Shift .................................................................................................. POA DEUTZ AGROTRON 90 MK3 90HP FWA A/C cab and F.E.Loader ............................................................... POA MF590 80HP, A/C cab, engine rebuilt ...................................................................................................... POA ISEKI SX 75 A/C cab, FWA, linkage one owner ........................................................................................ POA MF 394-4 Orchard Tractor, 80HP, Konig A/C cab ..................................................................................... POA INTER 484 ROPS frame, 2WD, remotes .................................................................................................. POA DAVID BROWN 880 with F/E loader ........................................................................................................ POA MASSEY FERGUSON 6150 95 HP A/C Cab Front end loader ................................. Going through workshop MASSEY FERGUSON 3070 95 HP A/C Cab Front end loader ................................... Going through workshop

COMBINES Case IH 8240, 2017 build, 1192 sep hrs, rock trap, chopper, singles, 2018 MacDon FD140 flex draper, x auger, coming in .................................................. $506,000 Case IH 7230, 2015 build, 1430 sep hrs, chopper, singles, MacDon FD75 40’ flex draper, x auger, coming in ....................................................... $396,000 Case IH 8230, 2014 build, 1812 sep hrs, rock trap, chopper, singles, 2013 40’ 2162 flex draper, x auger, coming in .................................. $385,000 Gleaner R75, 1500 s/hrs with 1 season old 35’ Agco 9250 Dyna Flex draper front, very tidy machine ................................................. $165,000

HAY

WINDROWERS

NEW HOLLAND SP H8080 15FT ROTARY MOWER CONDITIONER FRONT AND 25FT RAPER FRONT ON A TRAILER .................................................................................................................. POA MASSEY FERGUSON 30 FOOT 5200 TRIPLE DELIVERY DRAPER FRONT ................................................... POA

Case IH LBX 432, 2008 build, 4’x3’, single axle, approx.

14,000 bales, auto-lube, one owner .............................................................................. $71,500

MOWER CONDITIONER

MASSEY FERGUSON 1345 12 FT STEEL ROLLERS CENTRE SWING ......................................................... POA LELY PC 370 RS 3.7 MT STEEL ROLLERS CENTRE SWING late model ..................................................... POA TAARUP 4236CT 3.5 MTR tyne conditioner late model one owner .......................................................... POA KUHN 350G 3.5 MTR steel flail conditioner, swivel hitch ........................................................................ POA TAARUP 4036 3.5 MTR flail mower conditioner one owner..................................................................... POA VICON EXTRA 632T 3 mtr fiail mower conditioner linkage mount ........................................................... POA TAARUP 307 3.2 MTR flail mower conditioner......................................................................................... POA

Krone EasyCut 3210CRI Mower Conditioner, 2011 build, centre pull, 3.2m cut, poly chevron rollers, 1000 PTO, avail. Sept. ................................. $22,000 Krone 2015 1290 HPD XC 4 x 3 baler, tandem wheels, chopper, auto lube, scales, Gazeeka moisture meter, 36,500 bales coming in .......................... $121,000

MOWERS

Kuhn FC4060 TCS, 2015, 4 metre cut, steel on steel rollers, available Sept 20 .............. $44,000

ROUND BALER

MCHALE V640 5X4 ROTOR FEED one owner baler going through workshop ........................................... POA WELGER 445 5X4 ROTOR FEED AND KNIVES LATE MODEL BALER........................................................... POA WELGER 520 6X4 ROTOR FEED AND KNIVES GOOD BALER...................................................................... POA CASE 528 5X4 rotor feed net wrap and knives........................................................................................ POA CASE 628 6X4 rotor feed net wrap .......................................................................................................... POA JOHN DEERE 535 6X5 baler has net ....................................................................................................... POA CLAAS 280 6x4 roto feed string and net ................................................................................................ POA JOHN DEERE 467 6x4 Round Baler roto feed and net ............................................................................ POA CLAAS 280, 6x4 roto cut, string and net ................................................................................................. POA GRASSLANDS, 6x4 Silage Baler, wide pick up ........................................................................................ POA JD 590, 6x4 Round Baler, going through workshop ............................................................................... POA

Kuhn VB2190, 2014 build, approx. 28,500 bales, 6’ variable chamber, rotor feed, net, available Aug/Sept 21 ............................................................................ $20,900 Massey Fergeuson 2010 2170 4’x3’ big square baler, chopper, single axle, approx. 53,000 bales .................................................................................. $55,000

TILLAGE & SEEDING Morris 7240 Air Cart, 8000L, 2 bin, Tow between, ground drive, monitor, auger OBC ..... $44,000

Mercedes Benz 2222 prime mover with 30 Ft flat top trailer converted to tipper $20,000

HAY RAKES

Horwood Bagshaw 2006 27’ Scaribar, Agmaster flex boots, RFM coil press harrows,

SQUARE BALERS

1996 build 3000 litre trike air seeder hopper, zero max boxes OBHC ............................. $77,000

FFM-TV-5012485-A

side separating disc, 540 PTO ....................................................................................... $12,100

SPREADERS

AMAZONE 1500 LINKAGE MOUNT twin spinner ....................................................................................... POA

SEEDERS

DUNCAN RENOVATOR 19 RUN DUAL BOX WITH COULTERS ..................................... Going through workshop

FFM-TV-NMAI-5012666-A

MASSEY FERGUSON 2170 3x4 rotor cutter tandem axle.............................................................. COMING IN MASSEY FERGUSON 190 4X4 going through workshop has 2190 crank and reduced height chamber. ........ POA NEW HOLLAND 1210 3x4 Square Bale ................................................................................................... POA MF 185 3x3 Square Baler ....................................................................................................................... POA CASE 8580, 4x4 Square Baler ................................................................................................................ POA CASE 8570 3x3 Square Baler ................................................................................................................. POA

Kuhn EL92-230 Rotary Hoe, 2014 build, 2.3 m work width, crumble roller,

AD-591996311.als - Base Edition 86

TRUCKS

MASSEY FERGUSON 3877 7MT TWIN ROTOR RAKE…………………………………………….COMING IN MASSEY FERGUSON 10MT twin rotor rotary rake ........................................................................ COMING IN GENDORE 6500 6.5 twin rotor rotary rake .............................................................................................. POA KUHN GA 7301 7.5 mt twin rotor rotary rake .......................................................................................... POA

Horwood Bagshaw 2008 6000 litre trike air seeder with Topcon Eagle controller .......... $44,000

John Deere 7800, 1998 build, 520/85R38 rear & 420/85R28 front, 9900 hrs ................ $33,000

HARVESTING

Gleaner R60 30 Front $20,000

Mercedes Benz 1418 single drive with page and page pusher axle $10,000

A RANGE OF NEW 8" AND 10" GRAIN LINE AUGERS AVAILABLE

FFM-TV-M-5114257-A

5’ variable chamber, rotor feed, net, tidy, available Aug/Sept 21 .................................... $46,200

TRACTORS

GASON 1830RT 2 BIN GASON 1830 Rear Tow 2 Bin 4 Outlet Dual Front Castor Wheels. S27. TA598908. $33,000 Incl.Gst

TAARUP 2832F 3.2MT FRONT MOUNT DISC MOWER late model ......................................................... ...POA CLAAS 260 DISCO disc mower going through workshop ....................................................................... POA LELY 320 3.2MT disc mower one owner ................................................................................................. POA

Kuhn VB2265 Round Baler, 2017 build, approx. 14,000 bales,

Case IH 7120 Magnum, approx. 9250 hrs, drawbar, dual PTO, 20.8x38 & 14.9x28 tyres $33,000

HORWOOD BAGSHAW SCARIBAR 350 Suit Rear Tow Seeder AGMASTER Press Wheels. 42' Wide. 15 Inch, Extra Original Tines Available. Originally 36' with 7.5" Tine Spacing. S45. TA937451. $29,000

6/5/21 8:34 am

TradeFarmMachinery.com.au 87

HAYMOWERS SLASHERS MULCHERS

Sold & Serviced By

HARDI

A/H: (03) 5382 4234 Fax: (03) 5381 0380 Mobile: 0418 810 370

87-89 Dimboola Road, HORSHAM, Vic 3402

TOP MARK MACHINERY

Tel: (03) 5381 0370

8 Deviation Road, Naracoorte SA 5271 Ph (08) 8762 0955 Fax (08) 8762 0966

ABN 47 1934 965 94

A.C.N. 079 212 025 A.B.N. 84 079 212 025

Email: topmarksales@rbm.com.au

ALL PRICES INCLUDE GST

Reduce your cutting time!

Call us on 08 8584 7609 or visit www.loxtonengineering.com.au 16 Starcevich Road, Box 18 LOXTON SA 5333. Fax 08 8584 6380

KUBOTA M7151 PREMIUM 2019, M7151 860Hrs. 3FY0306. TA1081921. $132,000

MASSEY FERGUSON MF 20MD MASSEY FERGUSON MF20MD 4X4 UTILITY VEHICLE (Side by Side). 3 Cylinder Yanmar Diesel engine. 155 hours. Comes with roof and windscreen, VIC. DIY1082115.

0414 489 589. $16,800

CASE IH LB334 PACKER 2011, Baler.

3648970006. TA1081913. $49,500

GASON 1850 RT2 Gason 1850 RT2 air seeder c/w small seeds pasture planter in excellent conditions.

HM808. TA1061639. $33,000

FENDT 820 VARIO 800 2009, with loader.

10743501. TA1081909. $99,000 DUNCAN AG ENVIRO 740 triple disc drill, well maintained and always shedded, 05-346. NSW. DIY1080507. 0428 025 658. $40,000

K-LINE ST SERIES V RAKE ST 2009, 18 wheel V rake with splitter it.

9ST18193. TA1074330. $19,800

CATERPILLAR D4 RIPPERS Genuine Caterpillar rippers complete Suit D4, 941,951,955 traxcavators, 955 B loaders etc, ..

NSW. DIY1079254. 0467 001 588. $6,600

GASON 1820 1820 RT2 rear tow air seeder and Case level lift cultivator. HM798. TA1055593. $19,800

CLAAS ARION 640 2008, CEB 50 front suspension. 039547.

TA1074389.

$38,500

TRACTOR TYRES NEW BRAND NEW tractor tyres. Various brands, BKT, Harvest, Logger tyres, Apollo, Goodyear, Firestone, TIANLI Nokian, Simex, Westlake etc. Most sizes, bias & radial / forestry, truck & earthmover as well. Call Mick anytime, .. QLD. DIY561636. 0413 389 356. $99 From

ALLIS CHALMERS DD GRADER Superb grader for sale, 402273.

0420-822-945.

AD-591996311.als - Base Edition 87

QLD.

DIY1078174.

$33,000

For our full range of equipment please visit: hicks-machinery.tradefarmmachinery.com.au

AGCO ALLIS 9675 1996, Tractor.

972315. TA1034400. $38,500

topmarkmachinery.ihub.com.au

FFM-TV-5013246-A

FLEXI COIL 1610 PLUS BIN 1610 'Plus' rear tow air seeder.

HM784. TA997992. $11,000

FFM-TV-5013318-A

KUHN FC4000RG 2015, black diamond rollers. C0578. TA1074325. $36,300

5/5/21 12:17 pm

88 TradeFarmMachinery.com.au

Alex East Phillip Rowntree Gary Kotz Colin Adams

FARM MACHINERY FOR ALL SEASONS

CLAAS LEXION 760

2017, Engine Hours- 1315 Separator Hours - 940 Perkins Engine T3, Dynamic Cooling 11,500L Grain Tank, 4 XL Auger, Quantimeter Auto Crop Flow, Special Cut Spreader Macdon FD 75 W/Trailer S374. TA1076530.

GLEANER S98

CASE IH 9230 W/- CASE 2162 DRAPER FRONT

2017 Build 579 Engine Hours 377 Sep Hours 9.8L Engine 471HP Titan Terminal, tidy maintained machine. C71364.

2014, Seed Terminator 2020 Model Engine Hours -2050 Separator Hours- 1750 AFX Rotor 571hp Steer Ready Grain Tank 12,300l w/-Case 2012 Flex Draper 2162 45'.

S375. TA1076532.

TA970992.

$385,000 Inc GST

$448,800

$398,200 MILLER NITRO 4315 SP SPRAYER

CHALLENGER MT738

MASSEY FERGUSON HESSTON 9635

2009, 315HP Mercedes Benz Engine 4128 Engine Hours 30m Mono Boom with Triple Nozzles on 250mm spacings.

6100 Tank.

Steer ready, 3 Sensor Raven Auto High Grani Pot, Banjo Direct Fresh water fill pump.

Raven SCS 4600 Spray Control.

540/80R Industrial Tyres. 102713.

2008, 2504 Engine Hours 6.6L Agco SISU 190Hp Engine 2 Range Hydrostatic Transmission 9190 Razor Bar Front 16m cutting width Single Herringbone steel on steel conditioner With Front Trailer with brakes. 102650.

TA1082357.

$110,000

2018, Variable Transmission 7 cylinder 380HP -865 Engine hours 25 Inch Extreme Application Deluxe Cab Suspension 6 Rear Remotes with Power Beyond 3 Point Linkage Rear PTO. 102716. TA1082354.

TA1054173.

$115,500

CONTACT 0439 881 355 0428 859 027 0427 868 191 0429 941 331

$363,000

USED HEADERS:

2016 Claas Lexion 770TT w/- Seed Terminator .......... $462,000

USED SPREADERS:

New Holland CR9090 2013 Combine ........................... $302,500

2015 Claas Lexion 770TT w/-Macdon 45’ FD75 Front ..... $487,850

Bredal K105 Fertilizer/Manure Spreader ......................Coming in

John Deere S680 w- 40” front ..................................... $401,500

USED BOOMSPRAYS:

John Deere S680 w- 40” FD front ................................ $462,000

Miller Nitro 4315 ........................................................... $115,500

John Deere S690 w- 45” front ..................................... $327,800

USED FRONTS:

Claas Lexion 780TT w/- MacDon D65 40’ Draper front .... $495,000 Gleaner A86 .................................................................... $77,000

MAKE US AN OFFER WE CANT REFUSE!

Claas Vario 1350 Front & trailer ...................................... $66,000 MacDon FD 70 45’ Front & trailer ................................... $83,600

PRICES ARE INC GST CONDITIONS APPLY

Website: www.gjeast.com.au | Email: sales@gjeast.com.au | 4-8 Goldsworthy Street - Kadina

FFM-HH-5012311-C

SECONDHAND MACHINES IN STOCK 08 8821 1188

Powered by

RESEARCH • COMPARE • BUY • SELL

AUSTRALIA’S #1 FARM MACHINERY MARKETPLACE*

BUY

More than 40,000 tractors, spreaders, harvesters, hay tools, feeders, sprayers, trailers, and attachments, and other parts and accessories currently listed for sale

SELL

Unlimited stock listings on TradeFarmMachinery.com.au for just $360 per month SPRAYERS 8 PAGE SPECIAL FEATURE Issue 382 > $7.95 > On sale 27/02/20

Tractors, farm machinery & materials handling equipment for sale

>> TESTED Four High, Two Tonne Tobroco Giant 6004 Loader

Off the Chain

Hustler’s Chainless LX104 Bale Feeder

Fully Charged

Ram 1500 Laramie V6 Ecodiesel

4/3/20, 2:48 pm Page 1 of 1

BAUER TRADER MEDIA

SEARCH 4/3/20, 2:48 pm Page 1 of 1

NEW AND USED TRACTORS FOR SALE IN AUSTRALIA BAUER TRADER MEDIA Find new and used Tractors for sale with Farms & Farm Machinery magazine

SEARCH

NEXT

Page 1 of 188 (1,875 results) Premium Ads NEW AND USED TRACTORS FOR SALE INlist AUSTRALIA Sort by

Czech

CASE IH MAXXFARM 25 TRACTORNEXT $19,750 Page 1 of 188 (1,875 results) Sort by

list

Premium Ads

map

GET ALERTS

Serafin Machinery brings Czech manufacturer Farmet’s range of deep and disc cultivators to the local market >> Page 14

CASE IH MAXXFARM 25 TRACTOR $19,750

Tractors / Tractors / 0-40hp RefCode: TA978637 Class: 0-40hp Drive Type: 4WD FEL: YES Rated Engine Power - hp: 28 4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380 hours indicated, with books, approximately 28 horsepower, AS NEW *price includes gst

Mclaren Vale, SA

!

Tractors / Tractors / 0-40hp

CALL 08 7007 6847

,!3BD0A6-aaejdg!:K;N

www.TradeFarmMachinery.com.au

map

GET Find new and used Tractors for sale ALERTS with Farms & Farm Machinery magazine

$24,750 CASE IH 695XL. 70hp, Cabin, Challenge 349E front end loader + more • NSW 0429 467 147

$160,000 2016 GVM Mako. Spra coupe, 2vm boom, 1500L tank. • NSW 0488 442 372

MATE

$199,980

$50,000

2018 New Holland T7-260. 220hp, L4500 loader + much more • VIC 0402 851 544

44,480+

items for sale in print & online

2017 Kioti RX8030SP. ROPS, Loader & 4in1, had only light work • QLD 0437 113 771

8,340+

Trucks, utes and 4x4s now for sale!

RefCode: TA978637 Class: 0-40hp Drive Type: 4WD FEL: YES Rated EngineSAVE Power -ITEM hp: 28 4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380 hours indicated, with books, approximately 28 horsepower, AS NEW *price EMAIL SELLER includes gst

Mclaren Vale, SA

* Based on stock items for sale as at March 2020 KUBOTA 8540 ! CALL 08 7007 6847 $22,000 SAVE ITEM

EMAIL SELLER

KUBOTA 8540 $22,000

Tractors / Tractors / 40-100hp RefCode: TA994405 Class: 40-100hp Drive Type: FWA Number Cylinders/cc: 4 Rated Engine Power - hp: 85 Usage Hours: 5,800 Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives very well. Xgoverment . Inspection most welcome

Stonyford, VIC

Tractors / Tractors / 40-100hp

! CALL 03 8547 8644

RefCode: TA994405 Class: 40-100hp Drive Type: FWA Number Cylinders/cc: 4 Rated Engine Power - hp: 85 SAVE ITEM Usage Hours: 5,800 Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives very well. Xgoverment . Inspection most welcome

EMAIL SELLER

Stonyford, VIC

AD-591996311.als - Base Edition 88

KUBOTA L1-24DT TRACTOR WITH 4 IN 1 ! CALL 03 8547 8644 FEL 28HP $21,450 SAVE ITEM

EMAIL SELLER

KUBOTA L1-24DT TRACTOR WITH 4 IN 1 FEL 28HP

5/5/21 12:17 pm

TradeFarmMachinery.com.au 89

WANTED CONNOR SHEA SEEDERS, ANY CONDITION.

INTERNATIONAL 16 RUN COMBINE with Sam Direct Seeding Baker Boot Tynes, 3 boxes. S1990. TA1082319. POA

SAME FRUTTETO 85hp Burder Forklift & Hyd Bucket. S1999. TA1082325.

POA

SUPERWORM 20’ TRAILING AERATOR .. S1945. TA1059634.

POA

INTERNATIONAL 21 TYNE SCARIFIER .. S2004. TA1082331. POA

FORD NEW HOLLAND 4635 A/C, 3PL, 90% tyres. S1618. TA907655. POA

LISTER ELECTRIC SHEARING PLANTS Near New. S1993. TA1082320. POA

AGROW PLOUGH 14 TYNE 3PL Subsoiling Plough. S1987. TA1077614.

POA

DUNCAN 24 RUN DOUBLE DISC SEEDER with 3 boxes. S1948.

TA1059644. POA

5’ CONNOR SHEA DISC SEEDER 3PL New Bearings being fitted. S2000.

TA1082326. POA

PAGE 9’ SLASHER LINKAGE Heavy Duty. S2008. TA1082332. POA

THORNTON FEEDOUT CART 1 1/2 ton. S1967. TA1070161. POA

HARDI 400LTR BOOMSPRAY 3PL .. S1870.

TA1025089. POA

FORD NAPIER BLUELINE 32 DISC Heavy duty plough. S1980. TA1077606.

POA

JETSTREAM 5 IN 1 GROUPER Honda motor. S1984. TA1077611. POA

LISTER HYD SELF PINNING WOOLPRESS with Scales. S2009.

TA1082334. POA

NEW HOLLAND 352 HAMMERMILL MIXER .. S1919. TA1046903. POA

AITCHISON SEEDERMATIC 9’ trailing or linkage. S1968. TA1070162. POA

WALLACE 5 TYNE SUBSOIL PLOUGH 3PL Coulters. S1996. TA1082322. POA

ARROW LAMB MARKING CRADLE 4 Rotary. S2002. TA1082328. POA

BERENDS 3PL GROUND BREAKER RIPPER SUBSOILER 4 TYNE .. S1983.

TA1077609. POA

AGRIMASTER 10’ MULCHER 3PL with Depth Wheels. S2012. TA1082335. POA

GRIZZLY WHEELED OFFSET PLOUGH 36 DISC New discs and bearings. S1978.

TA1077604. POA

ROTATING WEED WIPERS 9’6” COVER SUIT QUAD, UTE OR TRACTOR. TA449307. POA

PORTABLE SHEEP YARDS .. S1979.

TA1077605. POA

NOBILI 9’ 3PL MULCHER High Body.

S1982. TA1077608. POA

ROCK-HOPPA DIRECT SEEDER 12 RUN ROCK HOPPER, EXTRA HEAVY DUTY. S1966. TA1063077. POA

PORTABLE LOADING RAMP Aluminium. S1995. TA1082321. POA

CONNOR SHEA 9’ DISC SEEDER ..

S2001. TA1082327. POA

DUNMORE ROCK PICKER .. S1959.

TA1063072. POA

NEW HOLLAND 8’ MOWER SLASHER TRAILING .. S1930. TA1055440. POA

3PL ROCK RAKES 6 TO 10 FT WINDROWS, RAKES & LEVELS, 6’, 8’ & 10’.

TA307516.

POA

CHRISGROW 10’ 3PL SLASHER ..

S1998. TA1082323. POA

KINGPACKER ROLLERS 8’ TO 15’.

S1753. TA958959. POA

DAKEN CATTLE CRUSH .. S2003.

TA1082329. POA

ACRES OF NEW & USED MACHINERY & SPARES NH 339 double chop forage harvester Hay Feed out buggy (Pearce) Baler, rakes, mower, handlers, elevators and spare parts.

Rakes, finger wheeeled 3PL, 3PL roller bar, tedder & rotary.

HAY EQUIPMENT Small square balers: NH 317, NH 275, NH 69, MF 12.

Claas Mower con - in stock MF 3PL roller bar

MISCELLANEOUS Buttsworth scoops 1 yd 3 tyne Moorehouse ripper, 3PL. Harrows cover, diamond, pasture & stump jump.

Bait layes 2, 3 & 5 tine rippers.

Harland irrigation pump, PTO. Daken 3PL forklift Piston pump 5" x 4" (DGM) 3PL stick rakes 6' to 10' new & sh

Forage harvesters & carts, NH Gehl & Tiki Rollers (Cambridge), culti packers, stones & tyre) 7' to 28'.

PTO hammermills, roller mills, grain gristers. From $595 3PL, 5-9 tine trail, 8-14 tine chisel ploughs From $795 Irrigation pipes, pumps & motors, travelling irrigators.

Scoops, 3PL, silt blades, carryalls and rippers.

2nd hand tractor tyres, belt pulleys, PTO From $195 2nd hand new tines Augers, 50' x 6" & 8", pencil 14' x 4" new and 2nd hand.

Harrows all types From $45 Boom sprays, 3PL, Hardi and Silvan, 400 & 600ltr.

Power Harrows 3PL Lely 15' Crump (Kurrajong 1000) 1 tonne trailing Manure-lime & super spreaders Super spreaders ground

drive, ½ - 4.5 tonne.

9' Roto wiper, new & secondhand Vicon spreaders 10 to 30 bag, Hardi 1200 ltr boomspray trail, foam & PTO. OFFSET/DISC PLOUGHS Grizzly 20 424 disc Gibbons Rawlings 28 plate SCARIFIERS & TILLERS Ferguson scarifiers 3PL 19 tyne Bagshaw scarifier towable SHEEP AND CATTLE Feeders (hay & grain) Cattle Scales Feedout bins and trailers.

Shearing plants, grinders, lamb cradles, handlers, wool pressers, bail heads, crushes, wool tables, hyd woolpress.

SLASHERS 8’ slasher 3PL (superior) 2.3 high body Nobili mulcher TRAILERS HYD Tipping 10' x 6' Freighter 4 wheel trailer Tipping trailer 8' x 6' From $975 TRACTORS Ford 3000, 45hp, 3PL, P-Steer. FE Loader.

Fergie TEA20 petrol

FFM-FP-5013027-TS-397

COMBINE AND SEEDERS Shea 5' & 7', 3PL disc seeder Seedling planter (Ellis) rotary 6' & 8' roller seeders 9' Connor Shea disc seeder trail C seeders Ellis and Sons 4 row seeders Inter 24 run combine MF 55 12 run combine 7' Ezy-Sow seeders 3PL $2,900

: FOR MOST EQUIPMENT **DELIVERY ARRANGED AUSTRALIA WIDE** SPARE PARTS: NEW AND S.H. AVAILABLE WANTED: Tractors and Machinery, any condition, anywhere Call Selwyn on (02) 6227 7227 or (02) 6227 7261 Hume Highway, Bookham (YASS) 2582 • OPEN 8 TO 5 MON-FRI • 0427 105 180

AD-591996311.als - Base Edition 89

5/5/21 12:17 pm

PRIVATE Advertising

www.tradefarmmachinery.com.au/sell

JOHN DEERE STS 9670 2010, 36ft Honeybee front with cross auger & Coolaman steel trailer, IH09670.

NSW. DIY1082280. 0428 686 348. $218,625

DETROIT 6 CYLINDER DIESEL 150 KVA Ex- Telstra 80 hrs only large fuel tanks air braked 4.8 GVM, ..

QLD. DIY1082036. 0432 078 672. $9,500

JOHN DEERE 6300 LOADER TRACTOR One owner. 640 loader bucket and hay forks 3rd function good tyres no oil leaks. Power quad transmission with shuttle remotes 3pl 3 speed pto. Very neat tidy tractor.

Inspections welcome. 38 k plus gst.

Can deliver, 6300. NSW. DIY1081750.

0405 320 845. $38,000

DUNLITE 3 PHASE 2000, this genset is in perfect working order go in any installation tomorrow, 938982348773. VIC. DIY1080765.

0418 108 320. $13,200

SAME SUPER TITAN 2003, Phone for more info, 3656. NSW. DIY1082557. 0400 878 490. $10,000

CASE IH STEIGER 400 2013, HD steiger 4wd tractor. Iveco 12.91 engine, power shift transmission, 4 sets remotes, quick hitch easy, EZ-steer guidance, 1700hr, excellent condition, 4 new tyres fitted on duels, 710/70R42 tyres,located Emerald QLD 4720, ZDF134347.

QLD. DIY1081310.

0418 112 682. $256,500 Incl. GST

WHOPPA CHOPPA ILW 2006, in good condition. Only lightly use due to change in farming, ILW06531.

VIC. DIY1080419. 0428 330 682. $16,500

LIQUID ISOTAINER 21000L ISO Tank 21000 Litre 316 L barrel and carbon steel container frame, SCFU8205421. WA. DIY1079608.

02 9252 6066. $11,000

DAWCO ENGINEERING 2021 COMBO FORKS 100% Australian made, DAWCO Engineering Combination Forks, designed for longevity and ease of use, 1. NSW. DIY1079540. 0435 740 558. $2,450

FAST 9613N 2016, 5000 litre 27 meter trailing boom, 9613N 6297.

NSW. DIY1082281. 0428 686 348. $82,445

CASE IH PUMA 165 2017, model Ultimate. Low hrs 1400HRS only showing Turbo charged FWA air conditioned cab. 3 Point linkage.

PTO 4 in 1 bucket and front loader. Nav Type III Receiver FM 750 guidance system. Tyres front 16.9.R30 Rear 20.8.R42 19 forward gear 6 back gear Power shift auto Special save on new, UNREG. NSW. DIY1078266.

0246 471 588. $213,000 = $194,000 + $19,400 GST

1300 362 272

GIANNI FERRARI 31050 2019, lawn mower, 1Z56056. VIC. DIY1081345.

0409 013 439. $65,000

KUBOTA B2710 2005, Front End Loader LA402, 4N1854. TAS. DIY1081262. 0419 376 310. $13,500

VERSATILE 320 2021, row crop FWA. Satellite ready, hard to find in Australia. Be quick, ready to go!.

Located Wagga Wagga, 73161987.

NSW. DIY1079654. 0427 923 113. $33,000

JOHN DEERE 5055D 2011, low hours. Always shedded. Just serviced. Excellent condition. Save thousands on new, 1PY5055DTBB003247.

VIC. DIY1078436. 0447 029 760. $18,000

SAME TITAN 160 4WD with front mounted boom slew. Good used condition, DGM-1304/5300-OM. QLD. DIY1078155. 0428 849 125. $32,000

DAWCO ENGINEERING 2021 100% Australian made, DAWCO Engineering Round Bale Grabs, designed for longevity and ease of use, 1.

NSW. DIY1079529.

0435 740 558. $3,600

ANTONIO CARRARO TRX 10900 2017, Ergit 100/TRX 10900. 72.9 kw/2600 rpm, 2355kg, 51hrs, reversible console, 4WD, 04976505999. QLD. DIY1079194.

0418 793 019. $88,300

DORMAN 3PHASE 165 KVA 2000, very good working stand by generator, 2239049u43.

VIC. DIY1080756. 0418 108 320. $9,500

CATERPILLAR D4 RIPPERS Genuine Caterpillar rippers complete Suit D4, 941,951,955 traxcavators, 955 B loaders etc, ..

NSW. DIY1079254. 0467 001 588. $6,600

MASSEY FERGUSON MF 20MD MASSEY FERGUSON MF20MD 4X4 UTILITY VEHICLE (Side by Side). 3 Cylinder Yanmar Diesel engine. 155 hours. Comes with roof and windscreen, VIC. DIY1082115.

0414 489 589. $16,800

 Grain drying systems  Grain Aeration Systems  High Pressure Blowers  Stirring/Wall & Roof Fans  Airseeder components  Commercial/Domestic AC systems

smallaire.com.au Manufacturers of Air Movement Products since 1974

AD-591996311.als - Base Edition 90

Ph: (03) 5382 5688 170 Golf Course Rd, Horsham VIC Ph: 0418 997 646 4/70 Strickland Street, South Perth WA



FFM-SH-5032334-TS-361

MAKING YOUR LIFE A BREEZE

5/5/21 12:17 pm

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS

Just $154,000!

Just $396,000!

Scan to view:

Scan to view:

or call 08 6555 3500

or call 08 6555 3500

2016 Case Magnum 240 CVT Tractor

2016 John Deere S690 + 640D

MFWD Cab with suspension, 50km/h IVT trans, 540/1000 rear PTO, singles, 3PL, 240hp, T4 engine Adblue, cab & front susp, 600/28 fronts, 2753 engine hrs, very tidy tractor.

2016 John Deere S690 Harvester + 2016 John Deere 640D Platform. Comes with John Deere 640D draper platform - folding grain tanks - 7” GS3 touchscreen - LED lights.

Just $68,750!

Just $330,000!

Scan to view:

Scan to view:

or call 08 6555 3500

or call 08 6555 3500

2007 Bourget 8810

2014 John Deere S680 + 640D

Seed Bar, double spring, 60’ @ 10” spacings, 450lb spring trips, set up as TBH, single shoot hose kit, Bourgault Gang Style press wheels, no points or boots fitted, Good Cond.

2014 John Deere S680 Combine Harvester 640D platform (no trailer ). 2440 engine hrs, 1968 sep hrs, front duals, premium cab.

Just $110,000!

Just $99,000!

Scan to view:

Scan to view:

or call 08 6555 3500

or call 08 6555 3500

2019 Coolamon SC4026

2006 John Deere 9860 STS

Spreader Chaser, 40,000L capacity, 3m centre, 30” tracks, 20” auger.

Combine harvester + 40’ MW platform. 3219 engine hrs, 2426 sep hrs. 800/70R38 front singles, 600/65R28 rear tyres. HUR 6.9M unload Auger - HID lights, service lights, chopper.

Just $99,000!

Just $49,500!

Scan to view:

Scan to view:

or call 08 6555 3500

or call 08 6555 3500

2012 John Deere S670

2008 Morris Maxim III Air Seeder

Combine harvester. 3680 eng hrs, 3130 sep hrs, push button 3 speed transmission. 520 duals, separator only, tier 2 engine, prem cab. 6.9m unloading Auger. Rust protection.

60’ @ 10” spacings, TBH, 4” steel press wheels, single shoot with liquid, Hyd tyne, presents well.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM 398 finished pages 91-106.indd 91

TradeFarmMachinery.com.au 91

5/05/2021 9:33:47 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS Just $170,500!

Just $99,000!

Scan to view:

Scan to view:

or call 08 6555 3500

or call 08 6555 3500

2012 John Deere S670

2010 John Deere 9670 STS

S670 with 640D draper front 2650 sep hours, Tier 2 engine, Premium Cab with Premium Radio (Export), HID Lighting Package and Header Extremity Lights.

with 640D platform. Well main machine, 4250 engine hrs, 3435 separator hrs, Greenstar ready chopper big top, 3 speed manual shift trans, 900 singles 18-4 R26 steer tyres.

Just $462,000!

Just $143,000!

Scan to view:

Scan to view:

or call 08 6555 3500

or call 08 6555 3500

2015 John Deere S690 Combine Harvester

2017 Bourgault 3320-40

With 640D Platform, singles, 2WD, Yield Monitor, Contour Master (Lateral Tilt Feederhouse), PowerCast Tailboard, Power Folding Bin Extension.

Paralink bar - 40’ @ 10” spacing, single shoot, Hyd coulters, Excellent Cond. Rebushed end of 2020 seeding season.

Just $132,000!

Just $198,000!

Scan to view:

Scan to view:

or call 08 6555 3500

or call 08 6555 3500

2014 Bourgault 3320-76

2013 Case 4430

2014 Bourgault Paralink 3320-PHD Air Seeder Bar - Factory 76’ been converted to 80’

4300 engine hrs, 120’ boom, 6000L tank, 380 tyres, excellent condition, trimble autosteer, Pro 700 Display available July 2021.

Just $88,000!

Just $22,000!

Scan to view:

Scan to view:

or call 08 6555 3500

or call 08 6555 3500

2015 Bourgault 3320

2009 John Deere 615P Pickup Platform

40’ @ 12” Spacings, 40 Tynes, Root Boot, Liquid Ready, Double shoot, 12.2 Metre Working Width. Fitted with High Floatation Kit. Location - Geraldton, WA

15ft, comes with trailer.

92 TradeFarmMachinery.com.au

FFM 398 finished pages 91-106.indd 92

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

5/05/2021 9:33:50 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS

Just $330,000!

Just $162,800!

Scan to view:

Scan to view:

or call 07 3171 1142

or call 07 3171 1142

2016 Claas Lexion 760TT

2012 Case IH 3330 Patriot Sprayer

1012 chopper hrs, tier 4 Perkins, dynamic cooling, APS threshing system, auto contour, 3XL unload auger, auto crop flow, C-MOTION control lever, central lubrication, autopilot.

3785L stainless tank, 30m boom with 500mm nozzle spacing, triple nozzle bodies, chemical induction hopper, air con, Groenveld autogreaser, approx 3700hrs.

Just $385,000!

Just $143,000!

Scan to view:

Scan to view:

or call 07 3171 1142

or call 07 3171 1142

2014 Claas Lexion 760

2014 Deutz-Fahr Agrotron 6210

41ft Midwest front & trailers. 1,330 engine hrs & 902 effective working hrs, 635mm Terra Trac on 3m centres, Cat C13 engine, auto contour for Vario front, 11,500L grain tank.

lightly used tractor, 1,344hrs, 210hp cab tractor, 4WD, 540/1000 PTO, 4 remotes, hook end linkage, front weight pack, aircon, good rubber, paint & panels in excellent Cond.

Just $52,800!

Just $11,500!

Scan to view:

Scan to view:

or call 02 9119 0300

or call 03 9116 6686

2016 16’ Canola P/U Front

Kawasaki Teryx 800 EPS

Small 16ft pick up front with CLAAS window with Leith trailer. Paddock ready, has done under 1000acres. Suit new buyer.

V TWIN 800, Tow Bar, 1627 Hrs, serviced, 2WD/4WD

Just $462,000!

POA Scan to view:

Scan to view:

or call 02 9119 0300

or call 02 9119 0300

2016 Amazone Pantera 4502

2020 Claas Liner 2700

Priced to SELL! SP Sprayer, 636 engine hrs, 4500L tank capacity, 36m boom, Amaselect, indiv nozzle cont, hyd breakaway, distance control/4 sensors, 500L clean water rinse tank.

6.8-7.4 meter working width, Hydally adjustable.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM 398 finished pages 91-106.indd 93

TradeFarmMachinery.com.au 93

5/05/2021 9:33:54 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS Just $9,900!

Just $3,999!

Scan to view:

Scan to view:

or call 03 9116 6686

or call 03 9116 6686

Vermeer 504L

Kubota KD5500

Round baler. Net wrap. Good condition. Did 80 bales last week with no issues.

Diesel generator. 5.5 KVA generator, OC95 diesel engine. 5.5lt fuel tank.

Just $3,500!

Just $35,995!

Scan to view:

Scan to view:

or call 03 9116 6686

or call 03 9116 6686

Cub Cadet 2042

Polaris RZR XP Turbo EPS

Mower in good working order, has been serviced and checked in our workshop. Twin cam 19hp Kohler motor with 42inch deck.

925cc 168HP turbocharged, twin cylinder, Fox podium shocks, 32” tyres is just a few features this off road weapon has. Comes with $2000 free accessories of your choice.

Just $55,000!

Just $92,400!

Scan to view:

Scan to view:

or call 03 8547 8799

or call 03 8547 8799

2018 Amazone Xtender Seed Hopper

2018 Amazone ED 6000

4200L hopper with 50/50 split, transport wheels, Comfort Pack with Twin Terminal 3.0 for easy calibration, Cat III tractor and implement mount, radar speed sensor.

ED6000-2 Precision Planter. 12 rows with 50cm spacing. Contour coulter units with Profi Hyds and full ISOBUS control. 7 singling disc options to suit a wide range of seeds.

Just $93,500!

Just $15,400!

Scan to view:

Scan to view:

or call 03 8547 8799

or call 03 8547 8799

2017 Amazone Certos 5001

2006 Claas Liner 680

Heavy Disc Cult/Speed Tiller, 5m working width, Cat III Linkage, 660mm large scalloped discs, 650mm Matrix profile wedge ring roller, crushboards, side levelling discs.

twin rotor, marsh rings fitted, has been through the workshop and is farm ready.

94 TradeFarmMachinery.com.au

FFM 398 finished pages 91-106.indd 94

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

5/05/2021 9:33:57 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS

Just $258,500!

Just $63,800!

Scan to view:

Scan to view:

or call 08 7007 6556

or call 08 7007 6556

2013 John Deere 8360RT

2009 Goldacres 6536EF Prairie

twin-track tractor in fantastic Cond, many could say brand new! Tractor features a 9 litre, 360hp John Deere engine with iVT trans (42kph), 60 GPM Hyd pump.

36m, twin line, induction hopper, raven controller, hyd pump.

Just $71,500!

Just $286,000!

Scan to view:

Scan to view:

or call 08 7007 6556

or call 08 7007 6556

2010 Croplands Pegasus 8000l/36m

2017 Hardi 5500 Saritor

2010 Pegasus 8000 with 36M Boom, Hyd Drive, Suspension, 710/70R42’s, Boom Plumbed to 7 sections, Hand Wash Tank, Dual Agitators, 700L Flush Tank, 100L Induction Hopper.

42.5M Pommier air boom on 250MM nozzle spacing with 3 way nozzle bodies, 2750 hrs, 480/80R50 tyres, Hardi HC9500 monitor and 10 boom sections.

Just $60,500!

Just $48,400!

Scan to view:

Scan to view:

or call 08 7007 6556

or call 08 7007 6556

2014 Fendt 210V TMS

Morris Concept 2000

100hp engine, owner/operator tractor, IVT, front axle susp, cab susp, 3PL w/quick release hooks, 1.9m wide overall, used in vineyard application, orig operators man, spare filters.

54ft (16.46m) 400lb spring breakout, floating hitch, double fold 9 inch spacings.

Just $203,500!

Just $60,500!

Scan to view:

Scan to view:

or call 08 7007 6556

or call 08 7007 6556

2017 Bourgault L7550

Case IH PTX600

New stock clearance program. Bourgault L7550AU air seeder leading 19.

62’ working width, 9” row spacings, 350Ib breakout, double shoot tow between air kit and Kelly prickle chain gang modules.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM 398 finished pages 91-106.indd 95

TradeFarmMachinery.com.au 95

5/05/2021 9:34:02 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS Just $101,200!

Just $550,000!

Scan to view:

Scan to view:

or call 02 9119 0301

or call 02 9119 0301

2014 Case IH LB434 Baler

2017 Case IH 9240

Standard Roto Feed Baler, 1000 PTO Drive, 6 Stringer, w/ Electric Fans, Case Pro-700 Monitor, Bale Count 32,708.

1259 engine and 922 rotor hrs. Single 800/70R38 drive tyres, Pro 700 display with Nav controller and 372 receiver, folding unload auger, Hyd folding grain tank extensions.

Just $495,000!

Just $60,500!

Scan to view:

Scan to view:

or call 02 9119 0301

or call 02 9119 0301

2016 Case IH 8240 Combine

2018 Faresin PF 1.11

With 1473 Engine 978 Rotor Hours, 800/70R38 drive tyres, Pro 700 display.

Vertical Mixer, 11 cubic mtr capacity/4,400kg, 540 PTO w/ 2 speed gearbox, 12 volt digital scales working off 4 load cells, horizontal unload conveyor delivering left and right.

Just $48,345!

Just $80,000!

Scan to view:

Scan to view:

or call 02 9119 0301

or call 02 9119 0301

2020 Aitchison 4124CT Direct Drill Combine

2019 Croplands Weedit Linkage Sprayer

24 run @ 5spacing, front manually adjusted coulters, hyd rear transport wheels & tow hitch, 540L seed & 540L fert Capacity, 3m sowing width.

12mtr Operating Width, End Tow Transport Hitch w/ Hyd Drop down Wheels, Folding Wings for Narrower Gate Access, 600ltr Main Tank & Flush Tank.

Just $50,600!

Just $4,730!

Scan to view:

Scan to view:

or call 02 9119 0301

or call 02 9119 0301

2021 Unia Ares 3.5

2017 Cosmo Bully UH-60 Rotary Hoe

Multidisc trailing tiller, drawbar unit, 3.5m cutting width, machine weight of 3880kg, hyd drawbar pitch control, hyd rear cage roller control, hyd lift, 3 sets of remotes required.

540 PTO drive, 8” friction clutch. 7 rotor flanges w/6 curved blades on each rotor suit 50/75hp tractor 1680mm cutting width.

96 TradeFarmMachinery.com.au

FFM 398 finished pages 91-106.indd 96

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

5/05/2021 9:34:42 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS

Just $108,900!

Just $132,000!

Scan to view:

Scan to view:

or call 03 8547 8800

or call 03 8547 8800

2017 John Deere 640X

2016 Krone BP 1290HDP

540 PTO drive shaft, auger hopper chute.

XC High Speed 6 String Baler, 41,200 Bales, X-Cut Chopper, Bale scales, Tandem Axle, Monitor, Grevillia Inoculant applicator. Good Cond.

Just $148,500!

Just $27,500!

Scan to view:

Scan to view:

or call 03 8547 8800

or call 03 8547 8800

2004 John Deere 9760STS

John Deere 787 Air Cart

30.5x32 & 18.4x26 tyres, chopper, 6.6m std unloading auger. Includes John Deere 936D draper but have choice of fronts available.

180Bu 2 Bins, Loading Auger, 6 Runs Primary (Max 8).

Just $165,000!

Just $27,500!

Scan to view:

Scan to view:

or call 03 8547 8800

or call 03 8547 8800

2004 John Deere 9860 STS

Goldacres Sprayer

Chopper, 6.9m HUR unloading auger, 800/70R38 & 600/65R28 tyres, Greenstar ready, HID lights. Choice of fronts.

5000L, 33m sprayer, dual line, CIH, TC, 300L fresh water, FM, Raven controller, 18.4 x 38 tyres, MG, PTO pump.

Just $55,000!

Just $352,000!

Scan to view:

Scan to view:

or call 03 8547 8800

or call 03 8547 8800

2008 Goldacres 6530

2014 John Deere 4940

6500L 30m dual line, Raven controller, CIH, TC, 400L FW, 20.8x38 tyres, airbags, MG, direct inj tank, Hyd drive.

SP Sprayer, 2287 eng hrs, 887 spray hrs, A/T ready, 2630 screen, steel boom excellent Cond, just arrived.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM 398 finished pages 91-106.indd 97

TradeFarmMachinery.com.au 97

5/05/2021 9:34:04 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS Just $155,000!

Just $135,000!

Scan to view:

Scan to view:

or call 08 7007 6557

or call 08 7007 6557

2019 Case IH Puma 165 Tractor

2020 Case IH Maxxum 115

FPT turbocharged 6cyl engine, 19F and 6R gears, 40kph powershift trans, 167hp - with boost 204hp, 3x mechanical remotes, 540/1000 PTO, multi-controller armrest, rear 3PL.

115CVT, FPT turbo 4cyl engine, 50kph CVT trans, 116hp with boost 144hp, 3x electro hyd remotes, 540/1000 PTO, multi-controller armrest, rear 3PL, front fenders, bar axle.

Just $10,990!

Just $30,500!

Scan to view:

Scan to view:

or call 08 7007 6557

or call 08 7007 6557

Kubota L2050

2020 Case IH Farmall 25B

3 cylinder engine, 25 HP, 2x4 2WD, 3 point-linkage, PTO 540, 2 speed transmission.

27hp engine, 3cyl 1.32L, hydrostatic high and low trans, 3PL Cat 1 with lift capacity of 650kg, 540 PTO, turf tyres, Prime-Lift 05C Loader with 4in1 bucket.

Just $29,700!

Just $37,900!

Scan to view:

Scan to view:

or call 08 7007 6557

or call 08 7007 6557

2000 Case IH CX80 Cab Tractor

2020 Case IH Farmall 50B

80HP Perkins 4 cyl eng - 10,134 hrs, power shuttle 24x24 trans, (hi and lo with creeper gears), brand new clutch, 3PL, aircon cabin, PTO, 2 rear remotes.

2.5L 4cyl diesel engine 50hp, mechanical trans, 4WD, ROPS, 540 PTO, 3PL 1252kg capacity, one rear hyd remote, Prime-Lift 15C Loader, 4in1 bucket 1700mm width.

Just $99,900!

Just $77,900!

Scan to view:

Scan to view:

or call 08 7007 6557

or call 08 7007 6557

2019 New Holland L225 Skidsteer

2020 Case IH Farmall 105C ROPS Tractor

82hp FPT eng, high flow hyd system - 131 lpm, hyd quick hitch attachment, EH control, 2spd travel - up to 17 km/h, battery isolator, Compuload weight system, road tyres with spare wheel.

3.4L FPT eng 107hp, PTO 91hp, 24x24 power shuttle hi/lo trans, hyd main pump flow 64 lpm, 2x rear remotes, Challenge loader program upgrade from standard to a 4in1 bucket.

98 TradeFarmMachinery.com.au

FFM 398 finished pages 91-106.indd 98

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

5/05/2021 9:34:45 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS

Just $89,100!

Just $231,000!

Scan to view:

Scan to view:

or call 02 8279 7138

or call 02 8279 7138

2018 John Deere 5100M

2011 John Deere 9770 STS

Cab tractor, delivered June 2020, only 26 hrs, with extended powertrain warranty to June 2022, power reverser 32/16 with Hi/Lo, triple rear remotes

3020 approx eng &2260 approx sep hrs, single fronts 90%, rears 30%, integrated autosteer less screen & receiver, spinners, also comes with a JD 640D Draper platform less trailer.

Just $462,000!

Just $27,500!

Scan to view:

Scan to view:

or call 02 6171 3039

or call 02 6171 3039

2016 John Deere S670

2012 John Deere 13.5L Irrigation Engine

Approx 1400 eng hrs / 1050 sep hrs, 800/70R38 front tyres 80% Firestone, 600/70R28 rear tyres 80% Firestone Chopper w/ Powercast tailboard LED lights

6,605 Hrs. 600 HP, engine safeguard controller. Tier III emission engine. Cooling package.

Filtered air intake and exhaust installed.

Just $264,000!

Just $104,500!

Scan to view:

Scan to view:

or call 02 6171 3039

or call 02 6171 3191

2015 John Deere 8370RT

2004 John Deere 9660 STS

IVT 42km/h transmission 30” Tracks @60% Wide Rollers Three Point Linkage.

4WD Rice, 4105 Engine and 3276 Separator hours, Complete with a John Deere 925D on trailer.

Just $296,450!

Just $42,350!

Scan to view:

Scan to view:

or call 02 8279 7035

or call 03 9116 6686

2017 John Deere 8370RT

Vicon RV5116

3490 engine hours, E23 42km/h transmission, 18” tracks, 4 SCV remotes.

Round Baler. Done 11,196 bales. New chain and drive sprokets. Full workshop service.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM 398 finished pages 91-106.indd 99

TradeFarmMachinery.com.au 99

5/05/2021 9:34:38 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS Just $407,000!

Just $165,000!

Scan to view:

Scan to view:

or call 03 8373 7241

or call 03 8373 7241

2015 CASE IH 7240

2017 Krone BP 1290HDP

Combine harvester, comes with a straw chopper, autosteer ready but no GPS, comes with 45 ft Case IH 3162 front and Trailer

6 string square baler, comes standard with chopper, tandem axle, scales, Gazeeka fitted, controlled through Isobus

Just $231,000!

Just $49,500!

Scan to view:

Scan to view:

or call 03 8373 7241

or call 03 8373 7241

2013 Case IH STX 400

2018 Krone ECTC400CRS

Steiger Rowtrac 400. 18 inch tracks at 50%, tracks done 1000 hrs, 4300 hrs, 5 sets of remotes, pto, cab suspension, cabin, tractor is in good condition.

Steel roller conditioner, centre pivot 2 point linkage hitch. Always shedded and serviced by Krone trained techs.

Just $286,000!

Just $57,200!

Scan to view:

Scan to view:

or call 03 8373 7241

or call 03 8373 7241

2013 Case IH STX Rowtrac 400

New Holland TM140

18 inch tracks at 50 %, tracks done 1000 hrs, 4300 hrs, 5 sets of remotes, PTO, cab suspension, cabin in good Cond, overall tractor is in good Cond.

Used New Holland TM140 tractor. Burder loader bucket and forks, 580/480 tyre package 60% all round.

Just $68,200!

Just $172,150!

Scan to view:

Scan to view:

or call 03 8373 7241

or call 03 8373 7241

2004 Case IH CVX1135

2019 Case IH Puma 155 Classic

Used cab tractor. Quicke loader bucket only. Front axle and cab suspension. 50K fully variable transmission. 650/65R38 and 540/65R28 tyre package. Electronic remotes.

Semi Power Shift Tractor with Quicke Q6M Loader. Cab suspension, air suspended operator seat with comfort passenger seat, front wheel fenders, only 308 eng hrs.

100 TradeFarmMachinery.com.au

FFM 398 finished pages 91-106.indd 100

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

5/05/2021 9:34:10 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS

Just $60,500!

Just $121,000!

Scan to view:

Scan to view:

or call 03 8373 7241

or call 03 8373 7241

2009 Goldacres 5030

2010 Case IH WD2303

Prairie Advance 2009 5000lt 30mt boom, induction hopper, dual boom 2TS with Raven 4400 controller and new loom. 3D breakaways. Air bag suspension.

Self-propelled Windrower, 3200 engine hours. Autosteer not included. Will be serviced and crop ready. Comes with 2017 Case IH RD193 mower conditioner with steel rollers.

Just $291,500!

Just $71,500!

Scan to view:

Scan to view:

or call 03 8373 7241

or call 03 8373 7241

2017 Case IH Magnum 310 CVT

2015 Claas Quadrant 3300

Ultimate spec. CVT transmission, 50km speed. 1550 engine hrs, 4 rear electro-hydraulic remotes with power beyond Cat 4 linkage. Drawbar, dual PTO 540/1000.

Claas 3300 square baler. rotor feed, single axle, 6 knotters. Comes with Gazeeka fitted. Will be serviced and crop ready. Located Ballarat.

Just $35,200!

Just $15,999!

Scan to view:

Scan to view:

or call 03 8373 7241

or call 03 8373 7241

2001 Case IH CX70 Tractor

2002 Phillips Canola Pick Up

FWA cab. Fitted with Pearson front end loader. Only done 3350 hrs. Comes with forward/ reverse shuttle and 2 speed powershift. Located Ballarat.

13ft pickup front. Suits Case IH Harvesters from 2008 onwards.

Just $44,900!

Just $148,500!

Scan to view:

Scan to view:

or call 03 8373 7241

or call 03 8373 7241

2009 Hardi 5030

2010 Case IH WD2303

Commander 5,000L with 30m boom, suspension, comes with Hardie 5500 controller, hyd lift and fold.

Self-propelled Windrower, 3200 eng hrs, autosteer not included. Comes with 2017 Case IH RD193 Mower Conditioner with steel rollers, only done 3 seasons with this front.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM 398 finished pages 91-106.indd 101

TradeFarmMachinery.com.au 101

5/05/2021 9:34:14 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS Just $56,000!

Just $33,000!

Scan to view:

Scan to view:

or call 08 7007 6558

or call 08 7007 6558

2014 CASE IH 3152

John Deere 630F

40ft draper front, upper cross auger, trailer included, good Cond, located Bordertown

Hydra flex front with a Leith trailer

Just $88,000!

Just $148,500!

Scan to view:

Scan to view:

or call 08 7007 6558

or call 08 7007 6558

2017 John Deere 30

2011 John Deere 7215R

Header front, 30”, expandable platform, approx 500 hrs, finger tine reel, table auger, great for direct heading canola

Cab MFWD w/suspension guidance-ready. Rear PTO: 540/1000 tyre width. Field cruise touchscreen GS3 command center 7” color display.

Just $8,250!

Just $3,850!

Scan to view:

Scan to view:

or call 08 7007 6558

or call 08 7007 6558

2003 Vicon Rotaflow RSXL

Hardi 2000L Vineyard Sprayer

3000L, 28m spread width, 6 spline 540 pto, 3pl , Tarp Cover. Located Bordertown.

Located at Naracoorte, sprayer in average Cond, sold on “as is” basis.

Just $19,800!

Just $198,000!

Scan to view:

Scan to view:

or call 08 7007 6558

or call 08 7007 6558

2003 Kuhn FC532G

2010 John Deere 9770 Harvester

Side pull Flail Conditioner. Located Naracoorte.

TBC 4500 eng hrs, 3000 rotor hrs, pro-drive, contour master, large wire and small wire concaves, chopper with manual vaneboard, 6.9m auger. Comes with 635D and trailer.

102 TradeFarmMachinery.com.au

FFM 398 finished pages 91-106.indd 102

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

5/05/2021 9:34:30 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS

Just $27,500!

Just $62,000!

Scan to view:

Scan to view:

or call 07 3073 8229

or call 07 3073 8229

FALC Agila 2500

Kuhn FC3160TCR

Tough, vers, 120hp g/box, high clearance body and large material intake, will handle pasture topping or mulching of vegetables, potatoes, orchard and vineyard prunings

New Kuhn FC3160 TCS disc mower conditioner 3.1m cut centre pull with Gyrodine hitch for sharp turns. Rubber rollers.

Just $63,000!

Just $63,995!

Scan to view:

Scan to view:

or call 07 3073 8229

or call 07 3073 8229

Kuhn FC3560TCR

Kioti PX9520 ROPS FEL

New Kuhn FC3560TCR disc mower conditioner 3.5m cut centre pull, rubber roller conditioner .

NEW. With loader and 4 in 1 bucket, 95hp Perkins diesel engine, forward / reverse shuttle, 16 x 16 trans, 4WD with diff lock

Just $27,500!

Just $9,900!

Scan to view:

Scan to view:

or call 07 3073 8229

or call 07 3073 8229

Serafin ECO 4500 Folding Slasher

2016 Quik Spray 5SDE 600

4.5m cutting width, solid filled tyres, 90-130hp, folded transport width 2200mm.

In excellent Cond. Only limited use from new. Incredibly productive way to control regrowth and weeds. Direct drive (chain not belt).

Just $78,995!

Just $12,000!

Scan to view:

Scan to view:

or call 07 3073 8229

or call 07 3073 8229

Kioti PX1Q052 Cab

Rhino 484 400 Series

New, 32F x32R power shuttle power shift trans, Loader with 4 in 1 bucket.

Super Duty 7’ Painted Slasher, twin rear wheels. Built for tough jobs. A 4 1/2” diam cut cap, deep reinforced domed deck design handle higher volumes of cut material easily.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM 398 finished pages 91-106.indd 103

TradeFarmMachinery.com.au 103

5/05/2021 9:34:18 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS Just $38,500!

Just $302,500!

Scan to view:

Scan to view:

or call 03 8547 8801

or call 03 8547 8801

2018 CASE IH Farmall 75C

Case IH 8230 2012 Model

3.2 L, 4cyl turbo charged motor, 75 hp, 12 x12 power shuttle, air suspension seat, sun canopy, 60HP PTO, 90ltr fuel tank

With 45 Ft Front Axial Flow Combine Harvester, 2965 Rotor Hrs, 3890 Engine Hrs

Just $195,000!

Just $7,900!

Scan to view:

Scan to view:

or call 03 8547 8801

or call 03 8547 8801

2018 Krone BP1290HDPXHS

2018 Can-Am Outlander 450 PRO

Big pack baler, 29000 bales, high speed, high density, 6 string baler with cutters. In excellent Cond, well looked after baler

As traded, 427cc 4 stroke engine, approved roll over protection installed, front mount tool/ accessory box, 4X4, dynamic power steering(DPS), rear tyres like new, 8700km’s

Just $313,500!

Just $550,000!

Scan to view:

Scan to view:

or call 03 8547 8801

or call 03 8547 8801

2015 Case IH 7140

2017 Case IH 7240

Rice Combine Harvester, 1380 rotor hrs, small tube rotor for capacity in rice but also performs well in cereals, used in cereals, 900/60R32 tyres, 4WD mudhogs.

Axial Flow Combine Harv, 1028 rotor hrs, 1212 eng hrs, Mich 620/70R42 Duals, 750/65R26 rear steer tyres, chopper, folding auger, PRO700 autosteer, Nav & 372 receiver.

Just $563,200!

Just $220,000!

Scan to view:

Scan to view:

or call 03 8547 8801

or call 03 8547 8801

2017 Case IH 7240

2010 Case IH 7088

Axial Flow Combine Harvester, 1072 Rotor Hrs, 1270 Engine hrs, Michelin 620/70R42 Duals with 750/65R26 rear steer tyres, chopper, folding auger. Immaculate condition.

Axial Flow Combine Harvester, AFX rotor, PRO700, Nav, 3094 rotor hrs, 4073 engine hrs.

Comes with 2009 Case IH 2152 40ft Draper Front with Leith 4 axle trailer.

104 TradeFarmMachinery.com.au

FFM 398 finished pages 91-106.indd 104

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

5/05/2021 9:34:22 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS

Just $75,000!

Just $115,000!

Scan to view:

Scan to view:

or call 03 6111 4727

or call 03 6111 4727

2004 John Deere 7820

2014 John Deere 6150R

MFWD Cabin Row Crop Tractor 8.1L John Deere 185hp Diesel engine 20 forward/ 20 reverse 40km/he PowerQuad transmission. One owner machine

Premium Tractor. 150+hp. 6 cylinder engine. 50km/h. infinitely variable trans, triple link front axle suspension, cabin suspension, auto trak ready, front linkage

Just $45,000!

Just $245,000!

Scan to view:

Scan to view:

or call 03 6111 4727

or call 03 6111 4727

1998 John Deere 7710

2016 John Deer 4040I

155hp, 6cyl engine, 20 speed powerquad trans, front axle suspension, 3 sets of rear remotes, 520/85R42 rear tyres, 42085R30 fronts, good order

Self propelled spray unit, 240hp, 6.8L engine, 40km/hr, quad control, trans traction control, 480/80R46 tyres, two sets of rims, 280L/min sprayer pump

Just $72,500!

Just $52,500!

Scan to view:

Scan to view:

or call 03 6111 4727

or call 03 6111 4727

2000 John Deere 8110

2005 Case MXM130 Tractor

Large Frame Row Crop Tractor, 200hp 8.1L engine, rebuilt PowerShift trans, Dual 520/85R42 rear tyres & single 16.9R30 front tyres, 4 rear remotes.

MFWD 130 HP Tractor fitted with Case LSX Self levelling Loader, has been through workshop, Good order, 480/80R42 Rear Tyres, 4 remotes, 3rd function on loader.

Just $10,500!

Just $55,000!

Scan to view:

Scan to view:

or call 03 6111 4727

or call 03 6111 4727

John Deere Power Harrow

2003 John Deere 6620

Valentini 6000 Maxi Diablo 6m Hyd fold power harrow. Levelling Bar Packer roller. Heavy duty gear boxes require minor work before service.

Premium cabin tractor, Triple link suspension, cabin suspension, Re-manufactured infinitely variable trans passenger seat, 520/85R38 rear and 480/70R28 front tyres.

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

FFM 398 finished pages 91-106.indd 105

TradeFarmMachinery.com.au 105

5/05/2021 9:34:34 AM

Scan the QR Code with your phone camera to find out more about these Hot Deals!

DEALS Just $77,000!

Just $99,000!

Scan to view:

Scan to view:

or call 03 8547 8800

or call 03 8547 8800

2019 John Deere 956

2012 Hardi Commander 8000I

956 Moco 2019 model, tri lobe steel rollers, drawbar hitch, completed 3,000 acres only.

Hydraulic tilt control.

8000 litre 36 metre trailing sprayer. Terraforce 8 section boom, ISOBus controller, Norac height control. Chemical induction hopper granni pot).

Just $55,000!

Just $55,000!

Scan to view:

Scan to view:

or call 03 8547 8800

or call 03 8547 8800

John Deere 9650CTS

2008 Goldacres 6530

Harvester, 2894 Sep Hrs w/- chopper/Chaffer, fronts available, 4396 usage hrs.

6500L 30M dual line Goldacres sprayer, Raven controller, CIH, TC, 400L FW, 20.8x38 tyres. Air bags, MG, direct inj tank, Hyd drive.

Just $275,000!

Just $90,000!

Scan to view:

Scan to view:

or call 03 8547 8800

or call 03 8547 8800

2012 John Deere S680

2001 John Deere 9750 STS

2493 engine, 1743 sep hrs, Pro-drive trans, chopper with power cast tailboard, field fit active yield kit, power fold lids, 800/70R38 fronts 28LR26 rears, 2500 usage hrs.

5083 eng hrs and 3556 rotor hrs, 4WD grain machine, straw spreaders, New bullet rotor two years ago. 2004 936D Draper front with contractor’s comb trailer.

Just $55,000!

Just $49,500!

Scan to view:

Scan to view:

or call 03 8547 8800

or call 03 8547 8800

Midwest 40 FT MID

2016 John Deere 946

One used MidWest DR40 40’ draper front with batt reel and trailer to suit. Suits John Deere 60/70 Series.

Centre Pivot Rotary Mower Conditioner, 4 metre cut, Tri-Lobe conditioner rollers, Rockshaft swivel hitch, Hyd tilt control, Good condition.

106 TradeFarmMachinery.com.au

FFM 398 finished pages 91-106.indd 106

THE TRACTOR YOU WANT IS NOW EASIER TO FIND

5/05/2021 9:34:26 AM

ISSUE 338

Forklifts, Machine Tools, Pumps, Generators & Industrial Equipment

bunbury base Mitch Avins to head up the latest franchise for heavy equipment hydraulic hose retailer, fitting and service company Hydraulink in Western Australia. More at TradePlantEquipment.com.au

$18,000 2007 AIRMAN PDS185S-6B4-T screw compressor.

4 cyl Nissan diesel, ready to use • VIC 0412 217 107

$28,000 2018 HAFCO METALMASTER PB-70. Pressbrake, fasfold + safety guarding system. • QLD 0413 380 615

$27,500 2016 EP CPYD70-RW5 Forklift. 6200kg lift capacity, perfect for warehouse work • VIC 0421 110 210

18,430+ items for sale in print & online FFM 398 107-127.indd 107

5/5/21 8:40 am

108 TradeFarmMachinery.com.au

Further Price Reduction

TA1058390.

SKYJACK SJ9250RT 2011, 50 Rough terrain 4WD Scissorlifts with self-levelling outriggers and dual power extension decks. Only 2 machines remaining, both in test until Oct 2021.

Located Syd & Melb. S5008 S5010.. TA1019562.

JLG 600AJ 60 4WD diesel Knuckle Booms. 4 machines offered and all are equipped with 7kVa on-board generators. These machines are all in test from October 2021 until March 2022 and are all located in our Melbourne Branch.

KB6062, KB6063, KB6066 & KB6067. TA1033085

$8,000 + GST = $8,800

18,000 + GST = $19,800

$40,000 + GST = $44,000

JLG 800AJ 80 4WD Diesel Knuckle Booms. 7 machines offered and all are equipped with 7kVa on-board generators. These machines are all in test until June 2021. Located in Melbourne, Brisbane, Townsville and Cairns.

KB8016G7-KB8022G7. TA1045325

GENIE S45 45' telescopic Boomlifts. 5 machines offered and all but 2 have on-board generators. In test from Feb 2022 until Jan 2023. Machines located in Brisbane, Sydney & Melbourne. Some of the machines are slightly cheaper.

B45128 - B45133. TA1019573

JLG B660SJ 66' 4WD telescopic Boomlifts. 3 machines offered and all are equipped with 7kVa on-board generators. In test from Nov 2022 until Dec 2022. Located in Brisbane & Townsville. B6626, B6627 & BB6628. TA1019572

$52,000 + GST = $57,200

$50,000 + GST = $55,000

$50,000 + GST = $55,000

JLG B860SJ 86ft 4WD, Diesel Stick Booms. 3 Machines offered and all are equipped with 7kVa on-board generators. These machines are all in test from June 2021 until July 2021.

And are located in our Melbourne & Brisbane branches.

B8609G7, B8610G7 & B8612G7. TA1053426.

MERLO P38.13 3.8 ton, 13.0 metre Telehandlers. 3 machines offered. In test from Feb 2022 until Oct 2022. Machines located in Brisbane & Mackay. Some of the machines are slightly cheaper. T38135, T38137 & T381312.

JLG 4013PS 4.0 ton, 13.0 metre Telehandlers. 8 machines offered in test from August 2021 to June 2022. Machines located in Melbourne, Brisbane and Mackay. Some are slightly more expensive. T40145 - T401312.

$38,000 + GST = $41,800

$50,000 + GST = $55,000

$50,000 + GST = $55,000

TA1019584.

0457 110 110

TA1065867.

PET-FP-5126550-A

SKYJACK SJ4626 2011, 26' Electric Scissorlifts, plenty to choose from.

454kg lift capacity all in good condition. In Brisbane and Melbourne. Machines in test until October 2021.

Various between S26258 - S26263.

sales@skyreach.com.au

www.skyreach.com.au

FFM 398 107-127.indd 108

5/5/21 8:40 am

TradeFarmMachinery.com.au 109

www.flt.com.au

FreeCall: 1800 688 788

Email: sales@FLT.com.au

Contact: Michael Carlin 0418 299 555

Stock located in Sydney, Brisbane, Melbourne, Perth

KALMAR DCF370-12 2012, 2 available and a pair of DCF330-12. 2,440mm forks, sideshift, fork positioner. Option 20x40 spreader. Mine site spec.

R3548. TA828696.

For Sale or Hire POA Freecall: 1800688788

OMEGA 36D 2010, stack highcube 20' containers 3 high. Enclosed air conditioned cab, excellent condition ready for delivery. R3467.

HYSTER H32.00F 2008, Can stack 31,500kg highcube 20' laden containers 3 high.

Option 40' Drive In Spreader. Low tech easy fix model. R3388.

For Sale or Hire POA FreeCall 1800688788

For Sale or Hire POA

SMV SMV12-1200B Ideal for furniture containers - stacks 12,000kg 20' highcubes Option 40' drive in quick attach spreader. R3560. TA846678.

For Sale or Hire POA FreeCall 1800688788

KALMAR (NEW) DRU450 Reach Stacker from Global Industry Leading Port Handling Equipment Manufacturer. Immediate delivery available. S89.

For Sale or Hire POA Hire to Buy

HYSTER (NEW) H16XD-6 16,000kg at 600mm load centre with 3750mm or 4650mm lift height, fork positioning sideshift and 2440mm forks. Mast on Transport Sale or Hire FreeCall 1800688788. R 8888. TA395730.

POA For Sale or Hire Ph: 1800 688 788

HYSTER H18.00XM-12 2008, 18,000kg highcube 20' containers 3 high with 2440 forks + fork positioning sideshift. Option 14,000kg with ELME 558 Sidelift for 20' and 40' highcube. R3282. TA511086.

For Sale or Hire POA $FreeCall 1800 688788

OMEGA 7ECH twin picks and stacks 20x40 empty containers 7 high. Similar 5/6 high low hour Kalmars also in stock. R3355. TA400307.

For Sale or Hire POA Ph 1800 688 788

HYSTER H16.00XM-6 2440mmm long forks, fork positioning sideshift, 3500mm lift height easy transport lowered height Cummins diesel. R3629. TA1073594.

POA For Sale or Hire Ph: 1800 688 788

ISOLOADER 21 Load unload and travel with 27t 20' and 40' containers. New Kohler diesel - Low cost container handler. R3621. TA1061595.

Buy or Hire FreeCall 1800 688788 POA

MOBICON 33T load unload and travel 33,000kg 20' and 40' shipping containers.

For sale & wanted. R3299. TA148664.

For Sale or Hire Ph: 1800 688788 POA

PRENTICE 7,000KG SWL Forklift Truck Ramps (8) to pick from. Ideal for shipping containers.

For Sale or Hire. Ph: 1800 688 788. R 3274. TA96974. $12,000 + GST = $13,200 For Sale or Hire

TA1081384.

www.FLT.com.au

FFM 398 107-127.indd 109

TA394061.

FreeCall: 1800 688 788

PET-FP-5011476-B

TA737310.

5/5/21 8:40 am

AUSTRALIA’S LARGEST FORKLIFT WHOLESALER TOYOTA CBT6 Electric Tow tug, great for transporting materials long distances with great manoeuvrability.

$4,500.00 inc GST

1300 438 3675 formidableforklifts.com.au

6/220-230 Barry Rd, Campbellfield (03) 9357 6291 Sales@formidableforklifts.com.au

FFM 398 107-127.indd 110

5/5/21 8:40 am

TradeFarmMachinery.com.au 111

SALES

HIRE

HIRE

6 MARIEANNE PLACE, MINCHINBURY, NSW, 2770 P: (02) 9832 9777 F: (02) 9832 9977 E: aonefork@lifttrucks.com.au

2500KG Gas Forklift Hire From $100 Per Week

HIRE

SALES

SALES

HIRE

BLISS FOX F1-80 90 Tonne Diesel Tow Tug. K069. TA1046649. $77,000

TOYOTA CBTY4 4 Tonne Electric Stand-on Tow Tug. CBTY4. $7,700

TOYOTA CBTY4 4 Tonne Electric Tow Tug with 3x Trailers.

L019.S.L014.L015.L016.. TA1052267. $22,000

TAILGATOR EHD2000 2 Tonne Diesel Self Loading Forklift with 3 Metre Lift. H069. TA1060070. $29,700

TOYOTA 2TG10 Toyota 15 Tonne LPG Tow Tug. F040. TA1081388. $17,600

TA1027566.

HIRE SALES

HIRE SALES

HIRE HIRE SALES

HIRE

SALES

HIRE

SALES

TOYOTA 2TG10 15 Tonne LPG Tow Tug. L044. TA1081386. $18,700

SALES

HIRE

FFM 398 107-127.indd 111

TA1078667.

$12,100 USED FORKLIFT HOTLINE: (02) 9832 9777

TOYOTA 2TG10 15 Tonne LPG Tow Tug. L052. TA1079560. $11,000

USED FORKLIFT HOTLINE: (02) 9832 9777

SALES

USED FORKLIFT HOTLINE: (02) 9832 9777

YALE ERP040TG 2 Tonne Electric Forklift with 4.5 Metre Lift. L041.

HIRE

SALES

HIRE

SALES

KOMATSU FG25HT-16 2.5 Tonne LPG Forklift with 4.5 Metre Lift.

FG25HT-16. TA1067718. $12,100

PET-FP-5011641-A

SALES

HIRE

SALES

HIRE

HIRE

SALES

ABN 17 064 853 318

SALES

PTY LIMITED

5/5/21 8:41 am

112 TradeFarmMachinery.com.au

PHIL HUNT

19-29 Curlew Cresc Tamworth NSW 2340 www.philhuntparts.com.au brendan@philhuntparts.com.au

PARTS

A/H: (02) 6762 4466 Ph: (02) 6762 4466 Fax: (02) 6762 4555 Mobile: 0429 624 144

RING ALL HOURS NEW AND S/H PARTS ALLIS-CHALMERS/HANOMAG/MASSEY JOHN DEERE INDUSTRIAL PARTS FOR Dozers, Loaders, Drotts, Graders, Scrapers

JOHN DEERE 850 DOZER Dozer Just in for Dismantling, Angle Tilt Blade with Twin Tilt Cylinders, Milano Ripper Assy, Good Undercarriage All Round, 6.619 Engine in Pieces, All Parts Available, Phone Brendan 02 6762 4466. S153. TA1068551.

POA

WRECKING DOZERS ALLIS-CHALMERS: Model “M”, HD5, HD6B,E, HD7W, HD7G, HDIIB, EP, HD15-16, HD16DC, HD16DP, HD19-21, HD41B FIAT: 451C, 555, 605, 50CI, 70CI, AT7C, 8B, BD10B, FD10E, BD20 HANOMAG/MASSEY: 2244, 200, 300, 3366, 400, 500, L400C, L600C, D600D Super, D700C JOHN DEERE : 1010C, 850

ALLIS CHALMERS HD16DP DOZER Just in for Dismantling, 16000H Good Running Engine, Bull Tilt Blade, 14 Foot Stick Rake, Good Undercarriage, Powershift Transmission, Carco Winch, All Parts Available, Phone Brendan 02 6762 4466. S148. TA1064473.

POA

LOADERS ALLIS-CHALMERS: TL12D, TL14, TL20, 545, 605B, 645, 745B,C FIAT: FR20B LD3, LD5, LD7 & LD9 Scoopmobile HANOMAG/MASSEY 22,33C,44, 55, CL55C,66C-D, 77 GRADERS ALLIS-CHALMERS: D, DD, M65, 65B, AD30-40, 45, 145, M100A, B, FG95 DRMCO/CHAMPION 562, 600, 720, 740 JOHN DEERE 570, 570A, 670A, 770, 770A, 772A

ALSO AVAILABLE Track Chains, Rollers, Idlers, Sprockets Various 4-1 Buckets, POA

ALLIS CHALMERS M100B Just in for Dismantling, Engine Runs Well, Good Tidy Grader All Round, All Parts Available.

Phone Brendan 02 6762 4466. S157. TA1076661.

POA

Allis Chalmers • Fiat Allis • Hanomag • Massey • JD Industrial

EMM-HH-5132462-B

ALLIS CHALMERS HD11EP Just in for Dismantling, Complete Running Machine, Powershift Transmission and Torque Converter, Near New Chains and Sprockets, Rear Rippers, Angle Tilt Blade, Engine Runs Well, Machine Operates well, All Parts Available. S156.

TA1076660.

POA

ALLIS WHEEL TRACTORS AC D17, D19, D21, XT190, 7000, 7010, 7020, 7040, 7060, 7080, 8010, 8050, 8070, 7580, 8550, 440

Generators New & Used

CATERPILLAR, CUMMINS, DETROIT, VOLVO, LISTER, ENGLISH ELECTRIC DORMAN, DEUTZ, PAXSMAN, FORD, RUSTON, TURBINES A.C.N. 086 652 226

Cummins Onan 68kva, natural gas set, 1076 hours, fuel tank base, drop over sound deadened canopy with muffler. Very tidy set ready for work. S235. TA1051104.

$16,500

CATERPILLAR 3508

Generator, 1000KVA, ex-standby with 1700 hours.

Radiator cooled, electronic governor. Maintained weekly.

S244. TA1063222.

$90,000

1166 Wellington Road Narre Warren East, Victoria, Australia 3804 Darren: 0418 364 166 | aaamachinery@yahoo.com.au

FFM 398 107-127.indd 112

CATERPILLAR 3412, 750KVA

1997, Ex-standby set with 283 hours, set is like new and comes with muffler, fuel tank and sound reduced drop over canopy. S253. TA1069043.

$80,000

CUMMINS 165 KVA

5000hours, full service history from new, fuel tank base, muffler and sound reduced canopy. Load tested and ready to work.

Call Scott 0400 658 496.

S224. TA1040691.

$20,000

WE BUY GENERATORS Scott: 0400 658 496 | scott@stcontractingvic.com

PET-HH-5011243-A

CUMMINS ONAN GGHF-5692812

5/5/21 8:41 am

TradeFarmMachinery.com.au 113

DIESEL ENGINES

Pty Ltd

New and Used Diesel Engines and Generators

Brett: 0408 781 735 Sunny: 0418 781 835 E-mail: sales@diesel-engine.com.au Address: 30 Paringa Road, Murarrie QLD 4172

KUBOTA V2203 PRESSURE CLEANER

CATERPILLAR 3406 MARINE ENGINE – DISMANTLING

LARGE NUMBER OF USED RUNNING AND PARTS GENERATORS IN STOCK

BRAND NEW WATER PUMP ENG, 27HP DIESEL, 3 CYLINDER, RADIATOR, MUFFLER & STUBSHAFT INCLUDED

BRAND NEW WATER PUMP ENGINE, 36HP DIESEL, 4 CYLINDER, RADIATOR, MUFFLER AND STUBSHAFT INCLUDED

CUMMINS 6CT8.3 610HP HYRDAULIC POWER PACK W/ MURPHY PANEL – USED <1000HRS

PERKINS 4236 PRESSURE CLEANER

BRAND NEW WATER PUMP ENGINE, 56HP DIESEL, 4 CYLINDER, RADIATOR ,MUFFLER AND STUBSHAFT INCLUDED

BRAND NEW WATER PUMP ENGINE, 88HP DIESEL, 4 CYLINDER, RADIATOR, MUFFLER AND STUBSHAFT INCLUDED

CUMMINS 6CTA8.3-C260 260HP 1135NM @ 1800RPM ENGINE - NEW

CUMMINS KTA19-P600 600HP @ 1500RPM ENGINE W/ RADIATOR- NEW

F3L912 BENEI 38HP ENGINE - NEW

CUMMINS 6BT5.9 MARINE W/ZF301C 1.1:1 GEARBOX – 210HP @ 2600RPM

CUMMINS KT19-M425 NEW/ UNUSED KEEL COOLED AND HEAT EXCHANGER COOLED

Detroit 471 Naturally aspirated Ex standby generator engine Variable revs Low Hour Under 1000

BRAND NEW 4” DIESEL, POWERED WATER PUMP MODEL WP100Y, 4 CYLINDER DIESEL, 80M3 /HR 20M HEAD

SCANIA MARINE DIESEL ENGINE, MODEL DSI11 350HP@2100

CUMMINS QSM11 MARINE X2

ANCHORS 250KG – 5T

PET-FP-5012529-CS-337

CATERPILLAR 3208T MARINE 320HP

WWW.DIESEL-ENGINE.COM.AU FFM 398 107-127.indd 113

5/5/21 8:41 am

114 TradeFarmMachinery.com.au

Colin: 0411 644 477 28 Goodman Place, Murarrie, QLD, 4172

GENIE GS3268RT 4WD diesel scissor lift - good all round condition, still working in rental fleet only 2 left. S1.

SNAPPY HEAVY DUTY Scaffold. S2. TA1054072. $550 + GST

TA1054069.

$20,000 + GST

SNAPPY MOBILE Mobile scaffolds for sale, supplied to your required height. S3. TA1054075.

POA

SNORKEL ATB60-CU 4WD- diesel 18m boom lift, very robust reliable machine. Very versatile. S4.

SNORKEL PRO66 RDZ 4WD diesel 20m boom lift good safe working order.

Still working in rental fleet.

S6. TA1054082. $24,500 + GST

SNORKEL SRT2770 RT 8.5m diesel scissor lift very reliable, great value.

S8. TA1054084. $15,500 + GST

SNORKEL TB50 RTZ 4WD diesel 15m boom lift popular size, very reliable model. S9. TA1054085. $17,500 + GST

SNORKEL TB60 RTZ 4WD diesel boom lift - good reliable unit. Still working in rental fleet. S10. TA1054088. $16,500 + GST

SNORKEL TB60 RTZ RDZ-4WD diesel boom lift (2) - good reliable machine.

Still working in rental fleet.

S11. TA1054089. $18,500 + GST

SNORKEL TB60 RDZ 4WD diesel boom lift (3) in good safe working order.

Still working in rental fleet.

S12. TA1054090. $22,500 + GST

TA1054078.

www.hireach.com.au FFM 398 107-127.indd 114

DOW-FP-5211710-A

$20,500 + GST

5/5/21 8:41 am

TradeFarmMachinery.com.au 115

FW & RB CRIGHTON RURAL ENGINEERING PTY LTD trading as

Heavy Duty Outdoor Fire Bucket

If you are looking for a fire bucket... for your 9 year old daughter's birthday party, you should go to Bunnings.

RURAL ENGINEERING Pty Ltd Cnr Nailor & Moama St, Hay, NSW, 2711 Ph:02 6993 1768 Fax:02 6993 3042 MOB: 0428 931 768

“NEW” SPIRAL WELD STEEL PIPE

100– 1800NB Assorted wall thickness, POA

If you want a Fire Bucket / Pit which will make you mates weak at the knees, have a look at this.

$900

BULK

ORDER DISCOUNTS

PUMPSETS

4” Ͳ 36” Pumpsets Diesel & Electric

4.5mm (114mm OD) 2.4 & 3m lengths from $47 +GST each 3.5mm (88.9mm OD) 2.4 & 3m lengths from $40 +GST each

$29,000

ALL ENQUIRES ph 02 6993 1768 or call Jasen 0428 931768

FFM 398 107-127.indd 115

PET-FP-5176479-CS-289

“NEW” BLACK PIPE

ALL TERRAIN COLES HYDRA CRANE Good clearance 4WD, mechanically sound, good tyres & road speed.

18m boom, currently not registered.

5/5/21 8:41 am

116 TradeFarmMachinery.com.au

www.nkf.net.au

STEEL POST ROUND POST

STEEL POST ROUND POST

STAR PICKETS STEEL

HEAVY DUTY FENCE POST Drill Pipe - Galvanised 73mm x 5mm x 2900mm 1 = $60.00 : 20 = $1,140.00 Prices are inclusive of GST. FENCING004. TA1077304.

HEAVY DUTY FENCE POST Drill Pipe - Galvanised 60mm x 5mm x 2900mm 1 = $47.30 : 20 = $900.00 Prices are inclusive of GST. FENCING003. TA1077303.

Heavy Duty Star Pickets 1800mm x Galvanised x 14 Holes 1 = $12.00 : 10 = $110.00 : 200 = $2,000.00 Prices are inclusive of GST FENCING002. TA1077294.

$1,140

$900

$12

STAR PICKETS STEEL

$7

ENWARE COMBINATION

Second Hand Stainless Steel Shower and Eyewash. SAFETY001.

ENWARE MULTI SPRAY

TA1077246.

Second Hand Stainless Steel Multi Spray Emergency Shower.

SAFETY002. TA1077253.

$990

$2,200

5 TONNE HYDRAULIC WINCH

UNKNOWN SWITCHBOARD

Second Hand Switch Board VERY GOOD CONDITION. ELECTRIC006. TA1077308.

$3,850

POLY PIPE HDPE POLY PIPE

Gears and Winches WPH 5000-2150 50kn, 150m, 20mm See website for more information $3,850 inc. GST*. ow9378-4. TA666155.

Various sizes and lengths IN STOCK. POLY001. TA1053481.

POA

$3,850

NKF Lot 8 Wirth Road Charlton, Toowoomba, QLD 4350 PO Box 58 Wyalla Plaza Q 4350

(07) 4630 4784

PET-FP-5190451-A

Heavy Duty Star Pickets 1800mm x Black x 14 Holes 1 = $7.00 : 10 = $66.00 : 200 = $1,300.00 Prices are inclusive of GST FENCING001. TA1077287.

Specialising in Second Hand Industrial Equipment

E nkfgroup@gmail.com www.nkf.net.au

Mob: 0419 002 950

“ * Prices subject to change, check website or ring for current pricing.”

FFM 398 107-127.indd 116

5/5/21 8:41 am

TradeFarmMachinery.com.au 117

(07) 4630 4784 www.nkf.net.au

Second Hand 3 Phase Electric Motor - Pump 1475 RPM Various Sizes Available. S178. TA1081376.

$3,500

KINGSLAND 35XA HYDRAULIC METAL WORKER

Second Hand Kingsland 35XA Hydraulic Metal Worker. MACHINES008.

TA1077243.

$3,300

WATER TANKS

ROUNDO R-2

COLCHESTER TRIUMPH 2000

Second Hand ROUNDO - R2 Bending Machine. S177. TA1081372.

Second Hand Colchester Triumph 2000 Lathe. MACHINES009.

$11,000

$3,300

FENCE POST DRILL TUBE

FENCE POST DRILL TUBE

TA1077241.

IN STOCK NOW 73mm x 5.5mm x 3 metres = $46.20 inc GST 73mm x 5.5mm x 2.3 metres = $37.50 inc GST Discount given on Full Semi Loads. PIPE102B. TA983082.

IN STOCK NOW 89mm x 7mm x 3 metres = $70.00 inc of GST 89mm x 7mm x 2.3 metres = $55.00 Discount given on Full Semi Trailer Loads. PIPE102A. TA1077239.

POA

$70

LARGE STEEL PIPE

CRUSADER CARAVAN

Second Hand Water Tanks Various Sizes Available. STANK017. TA788586.

Second Hand Steel Pipe Various Sizes Available. PIPE. TA983085.

"La Famiglia Grande" 21ft long Sleeps 8 : Excellent Condition. TRAILER162A. TA1053491.

POA

POA

$40,000

NKF Lot 8 Wirth Road Charlton, Toowoomba, QLD 4350 PO Box 58 Wyalla Plaza Q 4350

(07) 4630 4784

PET-FP-5190451-A

ELECTRIC 3 PHASE INDUCTION MOTOR VARIOUS SIZES AVAILABLE

Specialising in Second Hand Industrial Equipment

E sales@nkf.net.au www.nkf.net.au

Mob: 0419 002 950

“ * Prices subject to change, check website or ring for current pricing.”

FFM 398 107-127.indd 117

5/5/21 8:41 am

118 TradeFarmMachinery.com.au

69 LOUDOUN ROAD DALBY, QLD 4405 Yard Phone (07) 4662 0900 Mobile Phone 0417 617 461 Fax (07) 4662 0911 Email: thomastrading@bigpond.com www.thomasmanufacturing.com.au

THOMAS STANDARD BATCHING PLANT WITH DIESEL ENGINE & PLATFORM Various models available.

THSBPWDP. MADE TO ORDER. PRICES START FROM $102,487.00 + GST = $112,736

FFM 398 107-127.indd 118

THOMAS PRE COATING PLANT 1 x 6 cubic metre Hopper with 750 wide Feed Conveyor. 12 metre x 600 wide Radial Stacker.

Electrical Cabinet on stand, fitted with all necessary starting equipment.

THPCP2014. TADPLIn77608.

Quoted to Customer Spec POA

THOMAS 8 X 4 2 DECK SCREEN This is a sample of small screen boxes that we can manufacture on order.

TH8X42DS. TA250778.

Quoted to Customer Spec POA

THOMAS RADIAL STACKER 12m x 600mm wide with 600mm Walkway & Pre-coat box. Fitted with electric radial drive, 3 phase electric drive from head drum.

THRS1108. TA104047.

Quoted to Customer Spec POA

THOMAS FEED HOPPER 20 CUBIC METER with 900mm wide feed conveyor. TH20900. TA122049.

Quoted to Customer Spec POA

PET-F-GMAI-5059125-A

TA319287.

5/5/21 8:41 am

PO# 740354 | Sent 19-04-21 TradeFarmMachinery.com.au 119

“Setting the standard for Quality & Value”

Established 1930

’ CHOICE! THE INDUSTRY S CNC Machinery

Metal Working

Sheet Metal Fabrication

EB-320DS - Swivel Head-Dual Mitre Metal Cutting Band Saw • 310 x 205mm capacity • Swivel head dual mitre up to 60º • Ball bearing & carbide blade guides • Quick action clamp lever • Unique sliding vice design • 2hp, 415V - 2 speed motor • Includes adjustable length stop Order Code: B067

Workshop & Automotive

EW-30 English Wheel

• 2mm mild steel • 762mm throat • Includes 8 anvil sets

Order Code: B8085

9,950

PB-820A Manual Panbrake

15,950

$

OAV P30CE Panel Saw

• 2440 x 2mm capacity • Extended fingers for deeper boxes • Safety top beam support lever • Includes back gauge & digital angle gauge

• • • • • •

Ø305mm TCT blade Ø120mm scribe blade 548 x 896mm cast iron table 1600mm sliding table stroke Tilt arbor to 45º 5hp 415V motor

Order Code: S264

6,390

9,590

$

IW-60S - Hydraulic Punch & Shear

60 tonne capacity Dual independent operation Five work stations Punch: ø22 x 20mm Shear plate: 350 x 15mm Shear angle: 130 x 130 x 13mm 5.5kW/7.5hp, 415V motor

Made in Taiwan

BM-90HV - Industrial Turret Milling Machine

DE INCLU OF S 6 SET H & PUNC S DIE

• • • • • • • • •

Order Code: P174

BLE VARIAED, SPE PM 00R 60-36

NT40 vertical & horizontal tapers 3 Axis digital readout system Hardened ballscrew X & Y-Axis (X) 1120mm (Y) 520mm (Z) 440mm SERVO 1470 x 370mm work table -AXIS X & Y DS Square slideways X & Z-Axis FEE Turcite B coated slide-ways Powered Z-Axis travel 3.75kW / 5hp, 415V motors Order Code: M633D

40,750

$

$ Made in Taiwan

H-300HA-NC - NC Double Column Metal Cutting Band Saw

Made in Taiwan

CL-410 Centre Lathe

• 300 x 300mm capacity • NC Touch screen controller • Hydraulic vice clamping and hitch feed system • Hydraulic carbide blade guides • Hydraulic swarf conveyor • Automatic kerf compensation • Hydraulic blade tensioning system • Inverter controlled blade speed • Dual valve pressure & feed rate

• • • • • • • • •

Order Code: B118

27,250

M RIP 1300MACITY P CA

Order Code: W740

$

17,950

Measuring Equipment

• Ø1/2" - Ø2" NB pipe capacity • Ø6.35 - Ø63.5mm round tube capacity • Touch screen programmable controller • Stores 170 programs of 10 bends each • 240V power supply

$ Made in Taiwan

Machine Tool Accessories

RDB-250 - Motorised Pipe & Tube Rotary Draw Bender

Order Code: B8870

$

• • • • • • •

Cutting Tools

Lifting Handling

Ø410 x 1000mm capacity 2 axis digital readout system Quick change toolpost Induction hardened bed Auto lubrication pump for slides One piece cast iron base D1-6 camlock spindle nose 12 speeds, 25-2500rpm 5.5kW / 7.5hp, 415V motor

Order Code: L600D

14,750

$

58MM RE LE BO SPIND

$ Made in Taiwan

UNIQUE PROMO CODE

PE0521 ONLINE OR INSTORE!

VIEW AND PURCHASE THESE ITEMS ONLINE AT

www.machineryhouse.com.au/PE0521

SYDNEY

PERTH

(02) 9890 9111

BRISBANE

(07) 3715 2200

MELBOURNE (03) 9212 4422

(08) 9373 9999

1/2 Windsor Rd, Northmead

625 Boundary Rd, Coopers Plains

4 Abbotts Rd, Dandenong

11 Valentine St, Kewdale

05_P&E_100521

5,250

Wood Working

Specifications & Prices are subject to change without notification. All prices exclude GST and valid until 07-06-21

FFM 398 107-127.indd 119

5/5/21 8:41 am

120 TradeFarmMachinery.com.au

KUBOTA BE READY During the bushfire season you can rely on Kubota diesel generators for back-up power

Prepare for Bushfires | Lowboy 3 | GL9000 + 2-Pole/Single Phase PET-FP-5188110-CS-310

+ Capacity of 8kVA at 3000RPM + Super quiet operation

+ Large capacity fuel tank (28L) enables longer continuous operation on a single tank

Speak to LK Diesel today.

LKDiesel

52 Woodlands Drive Braeside VIC 3195 Ph: 03 9588 6900 Web: lkdiesel.com.au

FFM 398 107-127.indd 120

5/5/21 8:41 am

TradeFarmMachinery.com.au 121

0447 64 33 23 Griffith, NSW E: sales@liftek.com.au

www.liftek.com.au

SNORKEL AND TRAILER PACKAGES Various S1930, 1930ES Genie 1932 available, new and used trailers available, call for more info. S34. TA819706. $13,950

TOYOTA 32-8FG25 2012, Model container mast 4.5M 3 stage mast, side shift, only 5000 hours, solid tyres, serviced ready for work. S78. TA1081374. $18,800 +GST

FORWARD BIN TIPPER New and Used available, call for more info. S6. TA653780. $4,000 + GST

TOYOTA 7FBE18 ELECTRICS 1.8 ton lift capacity with 3 stage mast, also available 7FBE20 with container mast, call for more info. S21. TA731606. $12,100

MITSUBISHI 4.5 TON DIESEL 2 stage mast, side shift Dual wheels, serviced, new paint. S74. TA1065862. $17,500 + GST

TOYOTA 32-8FG30 3 TON 3 Stage Container Mast, Side Shift Solid Tyres. Fully Serviced. S68. TA1001248. $16,000 + GST

TRUCK WASH TWR 35 Brand new, 500ltr tank, 2100mm brush width, chemical regulation. Only requires one hydraulic forklift function. Will clean a B-Double in 10 minutes. S63. TA988194. $9,500 + GST

MERLO P40.17 2013, 4.0 TON, 17M, 2013 commission, only 2900 hours, very clean and tight machine, serviced and ready for any work S77. TA1080173. $74,800

JLG E400 ELECTRIC KNUCKLE LIFTS with recertification ready for work. Call for more info. S3.

TA653777. $28,900 + GST

PET-FP-5208733-A

Over 80 Forklifts, scissorlifts, telehandlers to choose from

FFM 398 107-127.indd 121

5/5/21 8:41 am

122 TradeFarmMachinery.com.au

HYSTER H225H

TYRE HANDLER, PERKINS PHAZER, HYSTER 3SP AUTO,4,640KG@2,540MM

HYSTER H52.00XM-16CH 40,000KG@1,749MM, CUMMINS QSM11, AUTO 4 SPEED

SMV SL32-1200-A

32,000KG@1,200MM, 6CYL SCANIA,

DANA TRANSMISSION, 2,400MM TYNES

HYSTER H50CT

SMV 4531

HYSTER H6.00XL

OMEGA 36C

HYSTER H16XM-12EC

HYSTER H48.00C-16CH

2,180KG@610MM, LPG, MAZDA 4CYL, POWERSHIFT TRANSMISSION

32,000KG@1,200MM, CUMMINS 6CT, CLARK 3SP AUTO, INDEPENDANT TYNES

FFM 398 107-127.indd 122

REACH STACKER, 45,000KG LIFT, SCANIA DIESEL, AUTOMATIC TRANSMISSION

9,000KG@1,200MM, CUMMINS QSB 5.9, ZF 3WG-201, 3 SPEED POWERSHIFT TRANS

5,200KG@600MM, DIESEL, 2SP POWERSHIFT, 1,220MM TYNES

40,000KG@1,400MM, DEDICATED CONTAINER ATTACHMENT 20’-40’

5/5/21 8:41 am

TradeFarmMachinery.com.au 123

FFM 398 107-127.indd 123

5/5/21 8:46 am

124 TradeFarmMachinery.com.au

WE BUY WEOLD BUYCRANES OLD CRANES

| ALL CONDITIONS 10 TONNE AND GREATER 10 TONNE CAPACITY AND GREATER CAPACITY | CONSIDERED ALL CONDITIONS CONSIDERED We are an Australian Wecompany are an Australian who workcompany on who work on your behalf to get theyour bestbehalf pricestofrom get the overseas best prices from overseas buyers. buyers.

You deal with one You company deal with throughout one company the throughout the transaction so you dont transaction have to worry so youabout dont have the to worry about the daunting export process. daunting export process.

Please email details Pleaseof email your crane details to: of your crane info@usedcrane.com.au info@usedcrane.com.au or call Dhruv onor call Dhruv 0411 034 788.

0411 034 788.

to: on

• Australian Company • Australian Exporting Company cranes since Exporting cranes since 2006 2006 • Access to most markets • Accessglobally to most hence markets we globally hence we can offer good pricescan foroffer your good cranes. prices for your cranes.

• Simple transaction• and timely payment and timely payment Simple transaction • No paperwork requirement • No paperwork from your requirement end so the from your end so the process is hassle free process is hassle free

d Outsource Australia Trade andPty Outsource Ltd trading Australia as Used PtyCranes Ltd trading Australia as Used Cranes Australia

0, 11-13 Solent Suite Circuit, 310,Norwest 11-13 Solent NSW Circuit, 2153 Norwest NSW 2153

8861 1660

+ 61 2 9659 8861 1466 1660

www.usedcrane.com.au www.usedcrane.com.au +info@usedcrane.com.au 61 2 9659 1466 info@usedcrane.com.au

WELDING EQUIPMENT AIRMAN PDS70 70cfm compressor, reconditioned. 2400 hrs. Diesel engine driven. $8,900 MILLER AIRPAK Diesel Driven Welder, Generator, Compressor. $25,750 + GST

LINCOLN VANTAGE 580 ENGINE WELDER Multiple units fully tested, With warranty. $14,500

LINCOLN VANTAGE 575 Diesel Welder. $8,500 inc GST

LINCOLN 305D 2009, Diesel Driven Welder, Generator.

300amp DC multi-process $12,100

AIRMAN PDS125 Diesel Driven Compressor 125CFM. $12,595

OUR USED EQUIPMENT IS SOLD WITH A WARRANTY

 07 3375 4146 1310 Boundary rd WACOL QLD 4076 36 Carmel st Garbutt QLD 4814

FFM 398 107-127.indd 124

5/5/21 8:41 am

TradeFarmMachinery.com.au 125

FOR SALE 10 YEAR INSPECTION & USED MACHINE SALES FOR SALE

SJIII3219 SCISSOR - $9,900+GST

FOR SALE

MANY REBUILDS UNDERWAY

GR20 MAN LIFTS - $10,000+GST

AVAILABLE NOW!

CONTACT: MARIO | MOBILE: 0438 022 022 | EMAIL: MARIOC@SSAEWP.COM. AU

PET-FP-5211536-CS-338

NEW MACHINE SALES

GET IN TOUCH:

CONTACT: MARIO | MOBILE: 0438 022 022 | EMAIL: MARIOC@SSAEWP.COM.AU FOLLOW US ON FACEBOOK: /SALESSERVICEAUSTRALIAEWP/ | WEBSITE: HTTP://WWW.SSAEWP.COM.AU/

FFM 398 107-127.indd 125

5/5/21 8:41 am

PRIVATE Advertising

tradeplantequipment.com.au/sell 1300 362 272

NEW COMPULOAD SCALES & PRINTER FOR ON BOARD WEIGHING!  Large LED backlight display  Made in Australia  Fully automatic  Static weighing  Simple to use  Dynamic weighing  Improves profitability  Full data management  Fast accurate weighing  Subtract function  Optional printer available  Split load function  Can be fitted to all types of machines  Optional USB Downloading (6000 only)

1800 285 277 www.compuload.com.au

GRACO XM PFP

Pump and container. Located in Western Sydney, ..

NSW. DIY960730.

AVAILABLE NATION-WIDE.

0412 249 163.

$60,500

SELL SYMONS 7FT MANTLES X2, .. QLD. DIY540212. 07 4950 5307.

0427 775 466. $13,200

YOUR

BALL MILL 30ft x 6ft, .. QLD. DIY540209. 07 4950 5307.

0427 775 466. $45,000 PLUS GST

TRUCK

VISIT TRADETRUCKS.CO OR CALL 1300 36 SYMONS 7FT CONCAVE ., .. QLD. DIY540214. 07 4950 5307.

0427 775 466. $7,000 PLUS GST

FFM 398 107-127.indd 126

CATERPILLAR D6 TRACK ROLLERS believed to fit a D6 Cat dozer, set of 6. Please call 0427 775 466, .. QLD. DIY857141.

07 4950 5307. $1,200 + GST

5/5/21 8:41 am

PRIVATE Advertising

MINYU MS3624 JAW CRUSHER 36 x 24, 16 new plates & 4 cheek plates. Phone 0427 775 466, .. QLD. DIY1046184.

07 4950 5307. $40,000 + GST

TYRE HANDLER KOMATSU WA600-1 Plus all Controls.

Phone 0427 775 466, .. QLD. DIY1046192. 07 4950 5307. $10,000 + GST

tradeplantequipment.com.au/sell 1300 362 272

KUE KEN 48 X 36 JAW CRUSHER on stand with feeder & scalper, refurbished. 0427 775 466, .. QLD. DIY957170.

07 4950 5307. $500,000 + GST

ELGI DH06019 Cummins 6bta 5.9-c180, engine is new, compressor has about 300 hours, trailer is new. Capacity 475 cfm at 150-175 psi. All papers available. Trailer is new with electric all wheel brakes etc, NEVER REGISTERED. QLD. DIY1081236. 0141 385 5292. $42,000 NO GST APPLIES

FEEDER BELT 30X4 FT HYDRAULIC DRIVE Phone 0427 775 466, .. QLD. DIY1046189. 07 4950 5307. $10,000 + GST

MINYU MS4230 JAW CRUSHER 42 x 30 S T Jaw Crusher.

Good order, 4 spare jaw plates & 2 cheek plates. Phone 0427 775 466, .. QLD. DIY1046187. 07 4950 5307. $55,000 = $50,000 + GST

SELL YOUR TRUCK

VISIT TRADETRUCKS.COM.AU/SELL OR CALL 1300 362 272

CATERPILLAR 992C 1985. Wrecking for parts, .. QLD. DIY645033. 07 4950 5307.

POA

UNKNOWN YSD CNC 160 AMPS 2020, CNC plasma cutting machine 0.5 - 25 mm cutting capacity with free air compressor, 100. NT. DIY1078010. 0430 990 545. $25,000

EL-JAY ROLLERCONE 54 CRUSHER with stand & electric motor & starter. Phone 0427 775 466, .. QLD. DIY1046181.

07 4950 5307. $71,500 = $65,000 + GST

SAND DRYER Gas powered, on stand. Good order. 40T/HR, 7.5m x 1,600mm, working when pulled down, .. QLD. DIY496592. 07 4950 5307. 0427 775 466. $35,000 plus GST

WABCO 50B Dump truck x 2. Parts only. Good 1710 Cummins motors x 2. Mob: 0427 775 466, .. QLD. DIY496585.

07 4950 5307. $20,000 plus GST

REDUCTION BOXES BREAKER DRIVERS fully rebuilt. 2 x available - Phone 0427 775 466, .. QLD. DIY1046194.

07 4950 5307. $5,000 + GST Each

FFM 398 107-127.indd 127

5/5/21 8:41 am

PRIVATE Advertising

tradefarmmachinery.com.au/sell 1300 362 272

Powered by

To select your advertising package, go to tradefarmmachinery.com.au/sell

ADVERTISEMENT DEADLINE

Issue: 399 Deadline: Fri 28/05/2021 5pm On Sale: Thu 17/06/2021 Issue: 400 Deadline: Fri 25/06/2021 5pm On Sale: Thu 15/07/2021

Each package includes 1 print issue in Farms & Farm Machinery and until sold on tradefarmmachinery.com.au

Value Pack

35

Premium Pack

55

$

Grand Pack

85

$

$

Jumbo Pack

Monster Pack

Mega Pack

130 $280 $750

$

Online Value

Online Value

Online Value

Online Value

Online Value

Online Value

✔Standard ad ✔Ad listed until sold

✔Premium online ad ✔Ad listed until sold

✔Premium online ad ✔Ad listed until sold

✔Premium online ad ✔Ad listed until sold

✔Premium online ad ✔Ad listed until sold

✔Premium online ad ✔Ad listed until sold

Print Value

Print Value

Print Value

Print Value

Print Value

Print Value

✔1/36 of a page ✔1 issue ✔Newsprint Colour

✔1/36 of a page ✔1 issue ✔Gloss Colour

✔1/18 of a page ✔1 issue ✔Newsprint Colour

✔1/8 of a page ✔1 issue ✔Gloss Colour

✔1/6 of a page ✔1 issue ✔Gloss Colour

✔1/2 of a page ✔1 issue ✔Gloss Colour

PRIVATE Advertising

tradefarmmachinery.com.au/sell 1300 362 272

PRIVATE Advertising

tradefarmmachinery.com.au/sell 1300 362 272

MEGA

PREMIUM

GLOSS

NEWSPRINT MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

GRAND GLOSS MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

MAKE AND MODEL

9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. Phone MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

$PRICE

MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

MONSTER

SELL YOUR

GLOSS

FARM MACHINERY

JUMBO GLOSS

VISIT THE WEBSITE OR CALL 1300 362 272 MAKE AND MODEL

VALUE NEWSPRINT MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

MAKE AND MODEL 9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. PH $PRICE

MAKE AND MODEL

MAKE AND MODEL

9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. Phone

9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. Phone

9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. Phone

$PRICE

$PRICE

$PRICE

1 item per ad space regardless of ad size The publisher accepts no responsibility or liability for any losses incurred by a buyer responding to an advertisement in this magazine. Buyers are solely responsible for their own negotiations and transactions with advertisers. Are Media Pty Limited advises buyers beware of negotiating by email only; of paying deposits to private advertisers for goods unseen; of transferring money (for example via Western Union) interstate or overseas. Buyers should contact Are Media Pty Limited customer services on 1300 362 272 if they suspect an advertisement may be fraudulent. In the event that a buyer suffers financial loss as a result of responding to a private advertisement in this publication Are Media Pty Limited (The Publisher) shall not be held liable or responsible.

1300 362 272

AD-591996311.als - Base Edition 128

privateads@bauertrader.com.au

tradefarmmachinery.com.au/sell

6/5/21 8:05 am

Get Get 13 13 issues issues of of

FOR JUST

79

$

.99!

You’ll receive 13 issues of Farms & Farm Machinery magazine Weekly e-newsletter FREE delivery to your mailbox

How? Visit magshop.com.au/ffm or call 136 116

Already a subscriber?

Simply call 136 116 to extend your subscription with this offer and save

FFM 2021 FFM FP Subs Ad.indd 1

Subscribe today, it’s easy!

5/05/2021 12:22:55 PM

Issue 398 index Agco Australia Limited (VIC) .................................................. Cover, 132

Daken ASV (NSW)............................................................................ 5, 19

MTD Products (VIC)............................................................................. 32

All Diesels (QLD).................................................................................. 76

Dieci Australia (NSW) .......................................................................... 27

Muller Fabrications (QLD) ................................................................... 67

Antonio Carraro Oceania Pty Ltd (NSW) ............................................ 11

Echuca Rural (VIC) .............................................................................. 78

Munro Engineers (VIC)........................................................................ 50

Brisbane Mini Excavators (QLD) ......................................................... 22

EL-Gra Engineering (NSW) ................................................................. 43

Now Buildings (VIC) ............................................................................ 49

Burder Ag Attachments (VIC) ............................................................. 59

FAE Australia Pacific Pty Ltd (VIC) ...................................................... 13

PFG Australia Pty Ltd (VIC).................................................................... 2

BYPY Transmissions (VIC) ................................................................... 70

Farmgard Pty Ltd (VIC) ........................................................................ 41

Poole & Jackson Pty Ltd (VIC) ............................................................. 86

G & J East Kadina (SA)......................................................................... 88

Powerace Pty Ltd (WA) ....................................................................... 71

Gendore Tractor & Machinery (VIC) ................................................... 54

Private Advertising Coupon ............................................... 128

Geronimo Farm Equipment Pty Ltd (NSW) ........................................ 17

Rebel Equipment (NSW) ..................................................................... 71

Grainrite (VIC) ...................................................................................... 69

Robinsons of Bookham (NSW) ........................................................... 89

Greg Allan Farm Machinery (VIC) ....................................................... 21

Rocca Industries (QLD) ....................................................................... 68

Hicks Machinery (VIC)......................................................................... 87

Rural Wrecking Co. (NSW) ................................................................... 79

Inlon Pty Ltd (NSW) ......................................................................... 7, 12

Sammut Agricultural Machinery Pty Ltd (NSW) ............................... 131

Jadan Enterprises (NSW) .................................................................... 69

Smallaire (VIC) ..................................................................................... 88

JCB Construction Equipment Australia (VIC) ..................................... 45

Top Mark Machinery (SA) ................................................................... 87

JNR Engineering (VIC) ......................................................................... 23

Vanderfield (QLD) ................................................................................ 52

John Berends Implements Pty Ltd (VIC)............................................. 29

Veldonas (VIC) ..................................................................................... 72

Castrol Australia (NSW) ..................................................................... 16

John Deere Tractors (NZ) ................................................................ 9, 46

W & P Pumps (VIC).............................................................................. 63

CJD Equipment (WA) ........................................................................... 33

Loxton Engineering Pty Ltd (SA) ......................................................... 87

WA Farmers (WA) ............................................................................... 35

Claas Harvest Centre Colac (VIC) ....................................................... 84

Makin Traks Construction Equipment Solutions (QLD)...................... 74

Wrights Tractor Sales & Service (SA) .................................................. 77

Cobram Farm Equipment (VIC) .......................................................... 86

Massaro Motors (VIC) ......................................................................... 78

Coolamon (NSW)................................................................................. 37

Michaels of Donald Pty Ltd (VIC) ........................................................ 85

Intersales Temora (NSW) ............................................................83 Lyndoch Motors (SA) ..................................................................86 Rocky River Ag Services (SA)......................................................84 TTMI (VIC) ....................................................................................82

5

Issue 338 index Allis Chalmers Australia (NSW)......................................................... 112

PR Power Pty Ltd (WA) ..................................................................... 123

Atlas Weighing (NSW) ....................................................................... 126

Price & Speed P/L (NSW) .................................................................. 122

Diesel Engines Pty Ltd (QLD) ............................................................ 113

Sales & Service Aust. (EWP) Pty Ltd (QLD) ....................................... 125

Forklift Traders (NSW) ....................................................................... 109

Skyreach Pty Ltd (QLD) ..................................................................... 108

A One Lift Truck Services (NSW) ................................................. 111

Formidable Forklifts Pty ltd (VIC) ...................................................... 110

AAA Machinery (VIC) ........................................................................ 112

Hare & Forbes (SYDNEY) (NSW) ....................................................... 119

FW & RB Crighton Pty Ltd (NSW) ...................................................... 115 Hi-Reach Rentals Australia Pty Ltd (QLD)......................................... 114 Thomas Manufacturing (QLD) .................................................... 118

Liftek Australia (NSW) ....................................................................... 121 LK Diesel Service Pty Ltd (VIC).......................................................... 120 Brisbane Welder Repairs & Rentals (QLD) ................................. 124

Used Cranes Australia (NSW) ........................................................... 124

NKF Group (QLD) ............................................................................... 116 Phil Hunt Parts (NSW) ....................................................................... 112

Powered by

RESEARCH COMPARE BUY SELL •

•

•

AUSTRALIA’S #1

FARM MACHINERY MARKETPLACE*

BUY

SELL

More than 40,000 tractors, spreaders, harvesters, hay tools, feeders, sprayers, trailers, and attachments, and other parts and accessories currently listed for sale

Unlimited stock listings on TradeFarmMachinery.com.au for just $360 per month

100-200hp Tractors 18 PAGE SPECIAL FEATURE Issue 393 > $7.95 > On sale 31/12/20

4/3/20, 2:48 pm Page 1 of 1

BAUER TRADER MEDIA

Tractors, farm machinery & materials handling equipment for sale

>> INSIDE SEARCH

A Load to Like Strautmann Giga-Vitesse CFS 3602

Great and Small EuroTier prize winnners

4/3/20, 2:48 pm Page 1 of 1

NEW AND USED TRACTORS FOR SALE IN AUSTRALIA BAUER TRADER MEDIA Find new and used Tractors for sale with Farms & Farm Machinery magazine

NEXT

SEARCH Page 1 of 188 (1,875 results)

Premium Ads NEW AND USED TRACTORS FOR SALE INlist AUSTRALIA Sort by

map

GET Find new and used Tractors for sale ALERTS with Farms & Farm Machinery magazine

CASE IH MAXXFARM 25 TRACTORNEXT $19,750 Page 1 of 188 (1,875 results) Sort by

list

Premium Ads

map

GET ALERTS

CASE IH MAXXFARM 25 TRACTOR $19,750

OPTIONS ,!3BD0A6-aaejdg!:k;L

* Based on stock items for sale as at March 2020

Now offered as a ROPS model, the Kubota M5-1 tractor series offers higher horsepower at lower engine speeds >> Page 14

galore

Tractors / Tractors / 0-40hp RefCode: TA978637 Class: 0-40hp Drive Type: 4WD FEL: YES Rated Engine Power - hp: 28 4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380 hours indicated, with books, approximately 28 horsepower, AS NEW *price includes gst

Mclaren Vale, SA

!

Tractors / Tractors / 0-40hp

CALL 08 7007 6847

RefCode: TA978637 Class: 0-40hp Drive Type: 4WD FEL: YES Rated EngineSAVE Power -ITEM hp: 28 4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380 hours indicated, with books, approximately 28 horsepower, AS NEW *price EMAIL SELLER includes gst

Mclaren Vale, SA

$63,800

$180,000

$43,450 NEG

2017 Hustler SF1750. 17.5 cube, side feed si’08 CLAAS 580R Combine. Honeybee flex lage wagon, many options • VIC 0437 136 209 draper front, comb trailer • NSW 0429 938 300

$297,000

1993 Delvano STM. Self-prop sprayer, 4WD, Perkins turbo 105hp • TAS 0439 304 542

33,625+

items for sale in print & online

’11 CASE IH 7120. 45ft 2152 Macdon, 4 axle Leith trailer, Exc cond • QLD 0409 250 888

5,850+

KUBOTA 8540 ! CALL 08 7007 6847 $22,000

Trucks, utes and 4x4s now for sale!

SAVE ITEM EMAIL SELLER

FFM 393 front cover.indd 1

11/12/2020 1:25:11 PM

KUBOTA 8540 $22,000

www.TradeFarmMachinery.com.au Tractors / Tractors / 40-100hp

RefCode: TA994405 Class: 40-100hp Drive Type: FWA Number Cylinders/cc: 4 Rated Engine Power - hp: 85 Usage Hours: 5,800

Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives very well. Xgoverment . Inspection most welcome

Stonyford, VIC

Tractors / Tractors / 40-100hp

! CALL 03 8547 8644

RefCode: TA994405 Class: 40-100hp Drive Type: FWA Number Cylinders/cc: 4 Rated Engine Power - hp: 85 SAVE ITEM Usage Hours: 5,800

Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives very well. Xgoverment . Inspection most welcome

EMAIL SELLER

Stonyford, VIC

KUBOTA L1-24DT TRACTOR WITH 4 IN 1 ! CALL 03 8547 8644 FEL 28HP $21,450 SAVE ITEM

EMAIL SELLER

KUBOTA L1-24DT TRACTOR WITH 4 IN 1 FEL 28HP $21,450

TERMS AND CONDITIONS

PRIVACY NOTICE Tractors / Tractors / 0-40hp

RefCode: TA757218 Class: 0-40hp Drive Type: 4WD FEL: YES Number Cylinders/cc: 3/1462cc Rated Engine Power - hp: 28

KUBOTA L1-24DT - 28hp 4WD DIESEL. The Kubota L1-24DT offers quality Japanese small tractor engineering. Its smooth, direct injection diesel engine is coupled with a higher specification shuttle shift transmission. With forward and reverse at your fingertips, this machine is the front end loader specialist.

Emu Plains, NSW

Tractors / Tractors / 0-40hp

! CALL 02 8315 0078

RefCode: TA757218 Class: 0-40hp Drive Type: 4WD FEL: YES Number Cylinders/cc: 3/1462cc SAVE ITEM Rated Engine Power - hp: 28

KUBOTA L1-24DT - 28hp 4WD DIESEL. The Kubota L1-24DT offers quality Japanese small tractor engineering. Its smooth, direct injection diesel engine is EMAIL coupled with a higher specification shuttle SELLER shift transmission. With forward and reverse at your fingertips, this machine is the front end loader specialist.

Emu Plains, NSW

KIOTI RX8030 FEL ! CALL 02 8315 0078 $42,995 SAVE ITEM

Acceptance of all advertising is subject to review and approval by management, the publisher reserves the right to edit, revise or reject any advertisements for any reason. The Publisher’s liability for damages resulting from errors in any advertising that it publishes or from its failure to publish any advertisement that it has agreed to publish shall be limited to the amount it actually received in consideration for its agreement to publish the advertisements in question. The Publisher shall not be responsible for any special, incidental or consequential damages suffered by any party resulting from its errors and/or omissions. The advertiser accepts all liability for the content of all advertising supplied by it and agrees to defend, indemnify and hold harmless the Publisher from any and all claims. All photographs become the property of Are Media Pty Ltd. For dealer and commercial advertising these terms and conditions should be read in conjunction with the terms, conditions, warranties and indemnities published in our dealer and commercial rate cards.

The publisher accepts no responsibility or liability for any losses incurred by a buyer responding to an advertisement in this magazine. Buyers are solely responsible for their own negotiations and transactions with advertisers. Are Media Pty Ltd advises buyers beware of negotiating by email only; of paying deposits to private advertisers for goods unseen; of transferring money (for example via Western Union) interstate or overseas.

Buyers should contact Are Media customer services on 1300 362 272 if they suspect an advertisement may be fraudulent. In the event that a buyer suffers financial loss as a result of responding to a private advertisement in this publication Are Media Ltd (The Publisher) shall not be held liable or responsible.

This issue of Farms and Farm Machinery is published by Are Media Pty Ltd (Are Media).

Are may use and disclose your information in accordance with our Privacy Policy, including to provide you with your requested products or services and to keep you informed of other Are publications, products, services and events. Our Privacy Policy is located at www.Are-media.com.au/privacy/ It also sets out on how you can access or correct your personal information and lodge a complaint. We disclose your personal information offshore to our joint venture partners, service providers and agents. It is not practicable to specify all countries to which we may disclose your personal information. The countries your personal information will be disclosed to include New Zealand, the USA and the Philippines. In addition, this issue may contain Reader Offers, being offers, competitions or surveys. Reader Offers may require you to provide personal information to enter or to take part.

Personal information collected for Reader Offers may be disclosed by us to service providers assisting Are in the conduct of the Reader Offer and to other organisations providing special prizes or offers that are part of the Reader Offer. An opt-out choice is provided with a Reader Offer. Unless you exercise that opt-out choice, personal information collected for Reader Offers may also be disclosed by us to other organisations for use by them to inform you about other products, services or events or to give to other organisations that may use this information for this purpose.

If you require further information, please contact Are Media’s Privacy Officer either by email at privacyofficer@aremedia.com.au or mail at Privacy Officer Are Media Pty Ltd, 54 Park Street, Sydney NSW 2000.

EMAIL SELLER

KIOTI RX8030 FEL $42,995

Tractors / Tractors / 40-100hp

RefCode: TA816304 Class: 40-100hp Rated Engine Power - hp: 80

Drive Type: FWA

New Kioti RX8030 front wheel assist tractor 12F x12R shuttle transmission linkage and remotes, Loader with 4in1 bucket Cheap power handy tractor $42995 Special 1 unit only

Wooroolin, QLD

! CALL Tractors / Tractors / 40-100hp

07 3073 8164

RefCode: TA816304 Class: 40-100hp SAVE ITEM Rated Engine Power - hp: 80

Drive Type: FWA

New Kioti RX8030 front wheel assist tractor 12F x12R shuttle transmission linkage and remotes, Loader with 4in1 bucket Cheap power handy tractor EMAIL SELLER $42995 Special 1 unit only

Wooroolin, QLD

2016 CASE IH MAXXUM 125 ! CALL 07 3073 8164 $138,000 SAVE ITEM

EMAIL SELLER

2016 CASE IH MAXXUM 125 $138,000

Tractors / Tractors / 100-150hp

RefCode: TA964942 Class: 100-150hp FEL: YES Rated Engine Power - hp: 127 Usage Hours: 515

Drive Type: 4WD

CASE MAXXUM 125 4WD 127 HP 6 CYLINDER AIR CONDITIONED WITH SUSPENSION CABN 16 X 16 SEMI POWERSHIFT TRANS PLUS MANY EXTRAS ,FRONT END LOADER 4IN1 WITH 8FT HYD ANGLE TILT BLADE HYD POST HOLE DIGGER 2...

North St Marys, NSW

Tractors / Tractors / 100-150hp

! CALL 02 6171 3260

RefCode: TA964942 Class: 100-150hp FEL: YES Rated Engine Power - hp: 127 SAVE ITEM Usage Hours: 515

Drive Type: 4WD

CASE MAXXUM 125 4WD 127 HP 6 CYLINDER AIR CONDITIONED WITH SUSPENSION CABN 16 X 16 SEMI POWERSHIFT TRANS PLUS MANY EMAIL SELLER EXTRAS ,FRONT END LOADER 4IN1 WITH 8FT HYD ANGLE TILT BLADE HYD POST HOLE DIGGER 2...

North St Marys, NSW

AGMAX SL210HD HEAVY DUTY SLASHER ! CALL 02 6171 3260 7' - 75HP GEARBOX $5,690 SAVE ITEM

EMAIL SELLER

AGMAX SL210HD HEAVY DUTY SLASHER 7' - 75HP GEARBOX $5,690

Tractors / Tractor Attachments RefCode: TA930462

AGMAX 7' heavy duty slasher. Suits tractors 85-120hp, 2 year warranty. Clear dense bush blocks and slash through heavy grass or woody vegetation. Built tough for Australian conditions.

Thomastown, VIC

! CALL 03 9998 4680

Tractors / Tractor Attachments

SAVE ITEM

RefCode: TA930462

AGMAX 7' heavy duty slasher. Suits tractors 85-120hp, 2 year warranty. Clear dense bush blocks and slash through heavy grass or woody vegetation. Built tough for Australian conditions.EMAIL SELLER

Thomastown, VIC

MERLO P 27.6 ! CALL 03 9998 4680 $89,900 SAVE ITEM

EMAIL SELLER

MERLO P 27.6 $89,900

Tractors / Tractors / 0-40hp RefCode: DIY939915 Class: 0-40hp Drive Type: 4WD Number Cylinders/cc: 3,300/4 Rated Engine Power - hp: 74 Usage Hours: 0 Compact Italian Made Telehandler - BOOM REACH OF 6M - Hydrostatic Transmission. Fuel Efficient & Fast - 40 km/h - Largest Cab on a Compact Telehandler. - 3 Cly. Turbo Engine.

Mildura, VIC

!

Tractors / Tractors / 0-40hp

CALL ** **** 1004

RefCode: DIY939915 Class: 0-40hp Drive Type: 4WD SAVERated ITEM Number Cylinders/cc: 3,300/4 Engine Power - hp: 74 Usage Hours: 0 Compact Italian Made Telehandler - BOOM REACH OF 6M - Hydrostatic EMAIL SELLER Transmission. Fuel Efficient & Fast - 40 km/h - Largest Cab on a Compact Telehandler. - 3 Cly. Turbo Engine.

Mildura, VIC

CASE IH 340 MAGNUM CVT ! CALL ** **** 1004 $175,000 SAVE ITEM EMAIL SELLER

CASE IH 340 MAGNUM CVT $175,000

www.aremedia.com.au n DEALER ADVERTISING 1300 362 355 n PRIVATE ADVERTISING 1300 362 272 Tractors / Tractors / 300-plus hp RefCode: TA991597 Drive Type: MFWD

Class: 300-plus hp Usage Hours: 4,709

340 MAGNUM CVT

St George, QLD

! CALL Tractors / Tractors / 300-plus hp RefCode: TA991597 Drive Type: MFWD

07 3171 1750

Class: 300-plus hp SAVE Usage Hours:ITEM 4,709

340 MAGNUM CVT

EMAIL SELLER St George, QLD

2018 DEUTZ-FAHR AGROTRON 6.00 ! CALL 07 3171 1750 AGROTRON 6135G $129,800 SAVE ITEM

EMAIL SELLER

2018 DEUTZ-FAHR AGROTRON 6.00 AGROTRON 6135G $129,800

Tractors / Tractors / 100-150hp RefCode: TA912404 Class: 100-150hp FEL: YES Rated Engine Power - hp: 141

Drive Type: 4WD

Type: Tractor Cab Tractor/Loader Make & Model: Deutz-Fahr Agrotron 6135G PowerVision Description: 141hp 6 Cyl/6057cc Turbocharged/Intercooled Deutz Engine No AdBlue or DPF, Wet clutch Powershuttle, ZF 30/15 Transmission 6 Powershifts with 5 Ranges, 4 Speed 540/540E/1000/1000E PTO, 540/65R24 Front & 600/65R38 Rear 84 L/min Open Center Hydraulics with 2 sets of remotes, 6200kg Linkage Lifting Capacity with Hook Ends.

Parkhurst, QLD

! CALL Tractors / Tractors / 100-150hp

07 3073 3756

RefCode: TA912404 Class: 100-150hp FEL: YES Rated EngineSAVE Power -ITEM hp: 141

Drive Type: 4WD

Type: Tractor Cab Tractor/Loader Make & Model: Deutz-Fahr Agrotron 6135G PowerVision Description: 141hp 6 Cyl/6057cc Turbocharged/Intercooled Deutz SELLER Engine No AdBlue or DPF, WetEMAIL clutch Powershuttle, ZF 30/15 Transmission 6 Powershifts with 5 Ranges, 4 Speed 540/540E/1000/1000E PTO, 540/65R24 Front & 600/65R38 Rear 84 L/min Open Center Hydraulics with 2 sets of remotes, 6200kg Linkage Lifting Capacity with Hook Ends.

Parkhurst, QLD

KUBOTA L4150 ! CALL 07 3073 3756 $12,000 SAVE ITEM

AD-591996311.als - Base Edition 130

EMAIL SELLER

KUBOTA L4150 $12,000

Tractors / Tractors / 40-100hp

6/5/21 10:51 am

AGRICULTURAL MACHINERY

TOSCANO MULCHER

SAMMUT TRUCK TRAYS

H/D construction Double or single side linkage Optional hydraulic side shift Sizes from 1.5 to 4mtr S359. TA1025453.

Price from $5,000 + GST

UNITED IMPLEMENTS BOX GRADER Made in USA Heavy duty build Hydraulic lift wheels Hydraulic angle adjustment 1800mm to 3600mm. S363. TA1025493.

Price from $4,800 + GST

SAMMUT ORCHARD / VINEYARD SPREADER

H/D Australian build Front or rear delivery. Sizes from 2m3 to 18m3 Optional telescopic conveyor, Optional end rotor or end spinner Custom built to suit your requirements. S366. TA1025523.

Price from $28,000 + GST

TOSCANO STONE BURIER

Phone: (02) 4579 6511 Mobile: 0414 423 680 Fax: (02) 4579 6522 Email: sales@sammut.com.au 67 Joshua Road, Freemans Reach NSW 2756

SAMMUT HARDOX TIPPER BODIES

H/D Australian made 3mm or 5mm floor Custom build Chassis modifications New and used trucks available. S360. TA1025472.

H/D build. One piece sides, 2 way gate Optional well hoist or twin under body. Optional drop sides Custom build. Colour of choice Sand blasted and finished in 2-pac New and Used trucks available. S362. TA1025485.

PRICE FROM $8,000 + GST

From $25,000 + GST

SAMMUT GEARMASTER TURF MOWER

SAMMUT MILL MUD SPREADERS

H/D Australian made Full gear drive, Stainless deck 75 HP gearboxes, 3pl or trailing Sizes from 1.5 mtr to 12mtr. S364. TA1025498.

Price from $15,000 + GST

SAMMUT SPREADERS

H/D Australian made Full hydraulic drive We can custom build. Optional front feed Optional side delivery. Chain or belt floor Sizes from 2m3 to 30 m3. S367. TA1025524.

H/D Australian made Full hydraulic drive, Single or 3 row Front feed, Single or double axle Optional rear spinners Sizes from 8m3 to 30m3. S365. TA1025500.

Price from $28,000 + GST

FIMAKS VERTICAL FEED MIXERS

Hardened bin and floor. H/D Comer Italian gearboxes Sizes from 3m3 to 30m3. Scales, In cab controls Optional folding conveyor with optional length Reduction box. S371. TA1025537.

From $25,000 + GST

Price from $18,000 + GST

TOSCANO SPEED DISC

FIMAKS MUCK SPREADERS

Extra heavy duty Hydraulic lift roller Gear drive Anti-pan blades 2200mm to 3200mm. S369. TA1025532.

Heavy duty Hydraulic lift crumble roller 560mm discs 3pl and trailing 2.5 mtr to 6mtr (trailing ). S368. TA1025525.

From 5 tonne to 30 tonne Heavy Duty conveyor chain, Slurry door, In cab controls Twin vertical beaters with bottom spinner Suitable for all your hard to spread products etc Wet cow manure, mulch, green waste etc. S373. TA1025543.

Price from $16,900 + GST

Price from $11,000 + GST

From $25,000 + GST

For more info please visit us at www.sammut.com.au

AD-594859966.als - Base Edition 131 AD-591996311.als

FFM-FP-5190448-A

SAMMUT

All the latest gear and greatest innovations

7/4/21 12:26 8:36 am 5/5/21 pm

THE BRAND NEW FINNISH ALL-ROUNDER The all new Valtra G Series is a compact and agile machine that delivers serious strength and performance.

Whether in the paddock, around the yard or doing a specialised task, this is your reliable working machine.

Contact your local Valtra dealer today for more information on the exciting new Valtra G Series.

www.valtra.com.au

VALTRA ® is a worldwide brand of AGCO

AD-591996311.als - Base Edition 132

G SERIES

105 - 135HP

5/5/21 8:27 am