POLISHING - PROCESS

Step by step process

1. Checking of the quality of slab (if not layed)

2. Preparing the slab by cleaning the dust and by removing the epoxy

3. Bringing the polish machine to the slab

4. Note: any dust or sand should not come into the contact to the slab so avoid using the slippers nearby otherwise the slab will get wasted

5. Start polishing with the polish machine SURIE POLEX 3000

6. Totally 8 coats of repitive polishing should be done

7. 1st and 2nd coat should be ½ hour and the rest will be 15 mins each