Skip to main content

Pool Magazine - Volume 6 - Issue 3 - Fall 2026

Page 1

VOLUME 6 - ISSUE 3 FALL 2026

Sacred Geometry A Unique Pool Design Where Architecture, Mathematics, and Mosaics Collide


PRO PRO MOVE: MOVE: MAKE MAKE EVERY EVERY SERVICE SERVICE VISIT VISIT AA WIN. WIN.

*Limited-time *Limited-time *Limited-time rebates rebates are rebates available areare available available on select on on select products select products products only. Valid only. only. while Valid Valid supplies while while supplies last supplies and lastsubject last andand subject tosubject additional to additional to additional restrictions restrictions restrictions and andand exclusions. exclusions. exclusions. PentairPentair may Pentair modify maymay modify ormodify terminate or terminate or terminate promotions promotions promotions at anyattime. any at any Visit time. time. www.pentair.com/hotdeals VisitVisit www.pentair.com/hotdeals www.pentair.com/hotdeals for details. for for details. details.

All indicated All indicated All indicated PentairPentair trademarks Pentair trademarks trademarks and logos andand are logos logos theare property are thethe property property of Pentair. of Pentair. ofThird-party Pentair. Third-party Third-party registered registered registered and unregistered andand unregistered unregistered trademarks trademarks trademarks and logos andand are logos logos theare property are thethe property property of theirofrespective their of their respective respective owners. owners. owners. ©2026©2026 Pentair. ©2026 Pentair. All Pentair. rights All rights All reserved. rights reserved. reserved. www.pentair.com www.pentair.com www.pentair.com


• •CONNECTED • CONNECTED CONNECTED PRODUCTS PRODUCTS PRODUCTS YOU YOU YOU CAN CAN CAN COUNT COUNT COUNT ON.ON. ON. • •FIELD-READY • FIELD-READY FIELD-READY SUPPORT SUPPORT SUPPORT YOU YOU YOU CAN CAN CAN RELY RELY RELY ON.ON. ON. • •PROMOTIONS • PROMOTIONS PROMOTIONS ONON SELECT ONSELECT SELECT PRODUCTS PRODUCTS PRODUCTS THAT THAT THAT CAN CAN CAN PUT PUT PUT CASH CASH CASH BACK BACK BACK IN IN YOUR INYOUR YOUR POCKET.* POCKET.* POCKET.* PARTNER PARTNER PARTNER WITH WITH WITH PENTAIR. PENTAIR. PENTAIR. PENTAIR.COM/BETHEPOOLHERO PENTAIR.COM/BETHEPOOLHERO PENTAIR.COM/BETHEPOOLHERO


Editor’s

LETTER

F

all has always felt a little different in the pool industry. After months of racing the clock, juggling schedules, solving problems and squeezing as much as possible out of every working day, the pace finally begins to change.

That doesn’t necessarily mean things get quiet. For many of us, they don’t. But getting through another summer gives you a chance to come up for air and look at your business with fresh eyes. During the season, it’s easy to focus entirely on what’s directly in front of you. There’s another pool to finish, another customer to call, another problem to solve. You do what needs to be done and keep moving. Fall gives us an opportunity to ask different questions. Are we better than we were a year ago? Did we take care of our customers and employees? What did we learn the hard way? What should we stop doing? And where do we want to be when the phones start ringing again next spring? No business gets better simply by being busy. Growth comes from taking what experience teaches us and doing something with it. Pool professionals are problem solvers by nature. We adapt because we have to. Every backyard is different, every customer presents a different challenge, and every season throws something new at us. As another summer disappears in the rearview mirror, take a moment to appreciate what you accomplished before worrying about what comes next. Take the wins. Learn from the mistakes. Appreciate the people who helped you through another season. Then get ready to do it all over again. Here’s to a great fall. Warmest Regards, Joe Trusty Editor-in-Chief Pool Magazine

Founder, CEO & Editor: Joe Trusty

Contributing Editor: Marcus Packer

In-House Photographer: Jimi Smith

President, Associate-Editor: Marianne Trusty

Contributing Editor: Alise Everton

Director of Marketing/Sales: Carol Gigliotti

Production Editor: Julie Hamlin

Contributing Authors: Brooke Roberts Lauren Broom Susie Cuebas

Cover Photo: Photographer: Max Apreture Advertisers: AquaBlu Mosaics, Aquamatic Cover Systems, Basecrete, Bioguard, Diamond Spas, FSPA, H2Flow, Hammerhead Aquatics, Hayward, Latham Pool, Master Pools Guild, Natural Chemistry, Pool & Hot Tub Alliance, Pentair, POOLCORP, PSP Deck Expo, Sable Green, Skimmer, Swim Sense, Tenjam, Universal White Cement, Viking Capital, WYBOT

POOL MAGAZINE - PO BOX 278 - Pilot Hill, CA 95664 www.poolmagazine.com | info@poolmagazine.com


Table of

CONTENTS 10

A NEW ERA AT POOLCORP

John Watwood discusses putting customers first and getting back to the fundamentals at POOLCORP.

12

RENOVATION TAKES CENTER STAGE

24

A NEW DIRECTION FOR POOL AUTOMATION

AquaLink EDGE and trackr iO point toward a more connected future for automation.

28

WYBOT PUSHING TOWARD GREATER AUTONOMY

As new construction slows, builders are finding opportunities in the renovation market.

WYBOT S3 combines robotic cleaning with self-docking and self-emptying technology.

14

IGARDEN K 32 PUTTING SERIES TO THE TEST

ANATOMY OF A BOTCHED POOL REMODEL

What went wrong with the Lincoln Memorial Reflecting Pool restoration—a closer look.

16

WHAT’S HIDING BENEATH THE SURFACE

Artificial rock features can transform a backyard, but what’s hiding beneath the surface may shock you.

20

WHY WAITING UNTIL SPRING CAN COST YOU

The off-season can be the best time to tackle a remodel, offering advantages in scheduling, cost, and time.

8

POOL MAGAZINE - VOL 6, ISSUE 3

After months in a real pool, we take a closer look at how iGarden’s K series stacks up.

36

PLASTERERS WEIGH IN ON NANO-SET

Pool plasterers share what they’re seeing in the field after putting Nano-Set to work.

40

WHERE ARCHITECTURE, MATHEMATICS, & MOSAICS COLLIDE

Ray Corral turns geometry into art with an ambitious design based on optical illusion, symmetry and intricate mosaic work.


PHOTOS: MAX APRETURE | MOSAICIST, INC.

48

BEYOND THE HOT TUB, THE COMPLETE WELLNESS EXPERIENCE

58

HIDDEN HAZARDS: WILDLIFE RISKS POOL PROS FACE ON THE JOB

50

THE CHANGING ROLE OF AUTOMATIC POOL COVERS

60

EXTENDING THE POOL SEASON WITH RADIANT HEATING

How hot tub owners are personalizing the backyard wellness experience.

Evolving beyond convenience, covers play a larger role in safety and cost of ownership.

52

HAYWARD BETS BIG ON DECENTRALIZED AUTOMATION

OmniX rethinks traditional automation by distributing intelligence across equipment.

54

THE PERFECT SIDEKICK IN ALGAE PREVENTION: ROBOTIC CLEANERS

Robotic cleaners have become the first line of defense in maintaining healthier bodies of water.

56

From venomous snakes and spiders to aggressive dogs, pool techs face unseen risks in the backyard.

A radiant heated pool deck shows how hydronic heating can improve safety, comfort and usability throughout the year.

62

A SOFTER APPROACH TO LUXURY GLASS TILE

Sand Pearl collection uses monochromatic glass and subtle patterns to create a distinct look.

64

WHAT’S HOT & TRENDING IN FIRE PITS & TABLES

From oversized fire tables to wood-grain concrete and integrated LEDs, The Outdoor Plus shares what’s trending in outdoor fire.

JOBBER: HELPING POOL PROS BUILD A SMARTER BUSINESS

Jobber hits the 100K customer milestone and the pool service industry has been a central part of that success.

Subscribe to make sure you receive each issue of Pool Magazine!


A New Era at POOLCORP

BY: JOE TRUSTY PHOTO CREDIT: POOLCORP

JOHN WATWOOD FOCUSES ON CUSTOMERS AND THE FUNDAMENTALS

F

or John Watwood, taking the helm of POOLCORP represents something of a full-circle moment.

More than two decades before becoming President and CEO of the world’s largest distributor of swimming pool supplies, equipment and related outdoor living products, Watwood was learning the business from the ground up as a young participant in POOLCORP’s Manager in Training program.

top leadership position following several difficult years for the pool industry. Elevated interest rates, reduced housing turnover and a slowdown in new pool construction have placed pressure on builders and the broader supply chain, while the large installed base of existing pools has made service, repair and renovation increasingly important areas of the market. Watwood doesn’t minimize those headwinds.

Decades later, Watwood returned to a dramatically larger organization and an industry facing a very different set of circumstances.

“We’ve got some challenges here for sure in the industry, and we’ve got some things we’ve got to get better at POOLCORP for sure,” he said. “But overall it’s been great.”

He stepped into POOLCORP’s

Rather than arriving with a

10

POOL MAGAZINE - VOL 6, ISSUE 3

sweeping transformation plan, Watwood said his first months have largely been spent listening. “My focus is to listen more than I talk,” he said. “I spend a lot of time in the field with our teams, at our sales centers, on calls with customers.” Those conversations have centered on understanding what POOLCORP already does well, but perhaps more importantly, identifying where customers encounter friction. “There’s just nothing you can do to replicate being in front of a customer and just listening to what their pain points are and what they need from us,” Watwood said.


“The organization just has to be super connected to the industry, to our customers, to our employees, so we’re really listening to what they need us to be and where we need to go.” For a company whose scale has long been one of its defining competitive advantages, Watwood sees operational execution as a strength POOLCORP needs to preserve. “We’re really good at the hard stuff,” he said, “when it comes to the operations, the four walls, POOLCORP’s really good at that, and has been for many years.” But being an effective distributor is only part of what Watwood believes customers will require from POOLCORP moving forward. “Can we be a better partner to the industry and the businesses out there? Of course we can,” he said. “Not just being a supplier, but being a business partner is just critical to the success of POOLCORP now and in the future.” From the customer’s perspective, he identified several straightforward benchmarks. “We’ve got to be easier to do business with,” he said. “We need to find new ways to help them grow their business, not just supply them, and we have to continue to build trust with them.” Reliability remains central to that equation. “If our customers need something from us, they have to know it’s there. They’ve got to know we can get it to them and get it out the door quickly because time is money in this industry.”

Finding Opportunity In a Difficult Market Exactly where those opportunities lie varies considerably across POOLCORP’s customer base. New construction remains the most obvious trouble spot. “That’s been the most challenged,” Watwood said. “It’s been a really tough environment for the last few years. Higher rates, less housing turnover. We all know the reasons why. It’s really slowed down new pool starts.” The issue, from Watwood’s perspective, is larger than any single manufacturer, distributor or builder can solve independently.

Getting the middle-market consumer back into the market will require cooperation throughout the industry. “I think it’s going to take a collective effort of all of us, supplier, distributor, dealer, builder, to really talk about what we can do and what we can impact,” Watwood said. Those discussions are already happening. Watwood said conversations with large pool builders have focused on how POOLCORP can become a better partner and help move more pools, including addressing costs that may be keeping middle-market consumers on the sidelines. Service and retail present a considerably different picture. “Service and retail, that’s probably the most near-term opportunity I see,” he said. “There’s millions of pools already out there, already in the ground. The repair and remodel business has been pretty strong for us. The service business remains strong as well.” Still, Watwood makes no secret of the fact that a healthier new construction market would benefit virtually every corner of the pool and outdoor living sector. “We all wish the industry would be a little more robust, right?” he said. “It would really help us out if we could get that new pool construction 20, 30% more than what it is right now.” New pools built today eventually become tomorrow’s service, repair and renovation customers, making construction an important feeder for the industry’s longterm installed base. When that rebound arrives, however, remains difficult to predict. “I honestly don’t have a crystal ball to say when the market is going to turn yet,” said Watwood. “The industry’s changing, we’re changing, customers are changing,” he said. “We need to be open and honest about what those changes are, where we’re going, and what we need to do to get there.” That also means being willing to question practices simply because they’ve worked historically. “Whatever we’ve done in the past for 20 years, maybe that’s not what we do moving forward.”

Read the entire article...


Pool Builders Adapt as Opportunities Shift TOWARD RENOVATION & UPGRADES

T

BY: JOE TRUSTY he pool industry is not operating in the same market it was only a few years ago.

New-pool construction has slowed in many parts of the country. Higher interest rates have raised the threshold for homeowners considering a major backyard project, and builders who spent the pandemic-era boom managing backlogs are now competing for a more deliberate customer. That doesn’t necessarily mean the opportunities have all dried up. But in a more selective market, builders are increasingly finding opportunity in the millions of backyards where a pool already exists. With an estimated 10.4 million

12 POOL MAGAZINE - VOL 6, ISSUE 3

residential pools already in the United States, compared with roughly 60,000 to 61,000 new in-ground pools being built annually, builders have a much larger installed base to serve through renovation, modernization and equipment upgrades. The shift is also showing up in industry data. In the Pool & Hot Tub Alliance’s third-quarter 2025 Quarterly Pulse Survey, 42 percent of pool companies reported increased renovation and remodel work, compared with 21 percent that reported a decline. For Teri Wiltshire, executive director of Master Pools Guild, a global network of independent pool builders, that shift is no longer theoretical. She sees it

playing out in conversations with builders operating in markets across the country. “The shift from new construction to renovation and backyard upgrades is real, and it’s widespread,” Wiltshire said. “I’d say the majority of our members have seen a portion of their business mix move in that direction over the past year.” For builders, capturing that work requires more than adding a remodeling service page to their website. It means treating renovation as its own sales and production category, with a different conversation, different customer expectations and often a different path to a signed contract. “The thriving companies


restructured their sales process around renovation and add-on revenue, and they tightened up their operations and overhead and got much more disciplined about lead quality and close rates instead of just focusing on volume,” Wiltshire said. “The ones struggling are largely still running the same playbook they ran back in 2021 and wondering why it’s not working.” During periods of rapid demand, inefficiencies can be easier to overlook. Leads are plentiful. Backlogs stretch for months. Sales teams can afford to spend time with prospects who are not fully qualified because enough work is coming through the door to cover the wasted effort. In that environment, volume can compensate for weaknesses in sales process, follow-up, staffing or overhead. A more competitive market is less forgiving. A builder may receive fewer inquiries than during the boom, but if those inquiries are better qualified, better educated and more likely to close, the company can spend less time chasing projects that were never realistic in the first place. “When times are good, everybody’s a genius,” Wiltshire said. “When times get tighter, you find out which parts of the business are actually working and which ones were being carried by volume.” Technology can play a role, but Wiltshire sees little value in adopting another platform simply because it promises automation or artificial intelligence. “Does it save me time or make me money in a way I can actually measure?” she said. “A lot of what’s being pitched right now is a solution looking for a problem.” That standard applies well beyond software. In the current market, builders are examining which parts of their operation actually contribute to profitable work and which were easier to overlook when demand was doing much of the heavy lifting. For companies that historically built mostly new pools, that same scrutiny is changing how they approach the customer. The shift toward renovation does not mean new-pool construction is going away. It does mean builders have a much larger market available to them than the annual number of new-pool starts suggests.

With more than 10 million residential pools already in the country, the number of pools entering a natural cycle of resurfacing, equipment replacement and modernization continues to grow. That installed base is not dependent on the next homeowner deciding whether this is finally the year to build a pool. For builders accustomed to relying heavily on new construction, serving that market may require changes in estimating, sales, marketing, staffing and production. It may also require a different way of thinking about the lifetime value of a customer. The company that builds or renovates a pool today can potentially remain involved as equipment is replaced, features are added and the backyard changes over time. Wiltshire sees the larger lesson as one of adaptation rather than waiting for market conditions to recreate the environment builders experienced several years ago. “What separates builders who are thriving from those who are struggling is whether they treated the slowdown as a signal to change or decided to just grit their teeth and wait it out,” she said. The market may eventually produce another surge in new construction. In the meantime, the existing pool inventory represents an opportunity measured in millions of backyards. For builders willing to adjust how they sell and operate, there is still plenty of work already in the ground.

Read the entire article...


Anatomy of a Botched Remodel: WHAT SANK THE REFLECTING POOL RESTORATION? BY: JOE TRUSTY PHOTO CREDITS: ROB ATHERTON, GDISALVO

W

hen the federal government completed a $14.7 million restoration of the Lincoln Memorial Reflecting Pool ahead of the nation’s America 250 celebrations, the project quickly became an operational nightmare. Its new blue coating began peeling, blistering and separating from the concrete. Officials initially raised the possibility of vandalism, and several people, including a former Olympic athlete, faced destruction-of-property charges. Federal prosecutors later dropped those charges after evidence pointed instead to a rushed, flawed installation. The contractor, Atlantic Industrial Coatings, subsequently identified

14 POOL MAGAZINE - VOL 6, ISSUE 3

problems with its own work, including insufficient primer in some areas and issues with the coating materials. For commercial pool professionals, the failure illustrates the risks of treating a massive immersed concrete vessel like an ordinary industrial floor. Atlantic was not widely known in the commercial aquatics industry, and the Reflecting Pool contract marked its first federal construction job. Although the company had reportedly worked on swimming pools at a Trump golf club in Virginia, restoring a national landmark presented a substantially different challenge. The roughly century-old Reflecting Pool presented a demanding restoration job. Its concrete had endured years of weather,

chemicals, biological growth and moisture. Vito Mariano, president of Basecrete Technologies, questioned whether enough had been done to remove degraded material and prepare the surface before applying a new coating. “I’m completely convinced in my mind this failure occurred because of a lack of prep work,” Mariano said. His assessment is not a final forensic finding, but it highlights a fundamental concern: coatings cannot reliably bond to a compromised substrate. The selected system combined Rhino 406 epoxy primer with a darkblue Rhino Pipeliner 5000 hybridpolyurea membrane. It depended on proper adhesion between the concrete, primer and topcoat, as well as carefully timed connections between sprayed sections.


The Mechanics of Delamination Project records identified two critical timing problems. The primer allowed up to 24 hours for the membrane to be applied, but work at one documented failure location exceeded that window. The membrane also had a roughly four-hour wet-on-wet window for adjoining spray passes. At five documented failure areas, crews waited five hours or longer between adjacent applications. “The primer underneath it had a tight window for the next coat,” Mariano explained. “That kind of timing is everything. Once you get outside the manufacturer’s window, you have to treat it differently before you keep building the system.” Atlantic later reported insufficient primer application in some areas and material incompatibility that contributed to blistering. According to the contractor, upper membrane layers heated beyond what the underlying layer could tolerate. Once adhesion failed, sections of the coating could separate across large areas. “The adhesion rate was minute. It was coming off in sheets, and you can pull it from one end to the other because there was very little bonding in it,” Mariano said. The project also attracted congressional scrutiny. In June, Rep. Robert Garcia requested specifications, performance standards, and testing records. “The American people deserve better management of their tax dollars,” Garcia wrote. “They also deserve to know how the contractors selected to do this work were vetted and how they plan to address their shoddy work moving forward.”

The Algae Debacle The coating failure unfolded alongside another highly visible problem: algae. The government awarded an emergency $1.7 million contract for an ozone-nanobubble treatment system, but algae returned after temporary equipment was shut down. A subsequent $2.7 million contract addressed water-treatment infrastructure. Combined with the original restoration, publicly reported commitments reached approximately $19.1 million.

The Lesson Learned The Reflecting Pool reopened June 6 with its new blue appearance. Within days, portions of the lining were peeling away in large sheets. By mid-July, the pool had been drained again for repairs. Atlantic returned to address the failed lining under warranty, with Rhino Linings supporting remediation. The public record does not establish that a single defect caused the failure. Inadequate preparation, primer coverage, material compatibility and missed application windows all emerged as concerns. Together, they illustrate how problems at different stages of an installation can compound into widespread coating failure. The restoration also exposed the logistical challenges of working on an enormous outdoor concrete vessel. Weather, temperature, substrate conditions and curing times all had to be managed while maintaining proper adhesion between coating layers. “Swimming pools are extremely temperamental, and our material choices are highly restricted,” Mariano said. “You can’t just take a standard industrial coating system and assume it will perform in a swimming pool.” For Mariano, the push to finish before the celebrations was central to what went wrong. “I think the push to finish by July 4 was the number one issue,” Mariano concluded. “Everybody was working against a hard deadline, and that is when problems start. When a job gets rushed, critical steps get squeezed. That never changes—and when it happens on a project this size, it gets expensive fast. That’s the lesson, if there’s anything to learn from this.”

Read the entire article.


What’s Hiding Beneath The Surface:

ARTIFICIAL ROCK FEATURES

A

BY: MARCUS PACKER | PHOTO CREDITS: ROCKWORKS INC. rtificial rock waterfalls, grottoes and slides can be some of the most impressive features in a backyard swimming pool. But when the structure hidden beneath that concrete is built incorrectly, the consequences can be far more serious than cosmetic cracks.

seriously injured. But when Lewis opened the feature, the reinforcing steel supporting thousands of pounds of concrete had deteriorated so badly that pieces could be broken apart by hand.

That became clear when Jason Lewis of Rockworks Inc. inspected an artificial rock feature at an Arizona home. The homeowner had noticed deterioration, and Lewis warned that the structure appeared to be approaching failure. Repairs were postponed while other work continued around the property.

For Lewis, who has spent more than three decades building real and artificial rock features, the failure wasn’t unusual. He estimates approximately 70% of his work now involves repairs, demolition or rebuilding rather than new construction.

Then the homeowner called again. His son had fallen through the top of the structure. Fortunately, the child wasn’t

16 POOL MAGAZINE - VOL 6, ISSUE 3

“All of the steel was only six years old,” Lewis said.

The fundamental problem Lewis repeatedly encounters is improperly protected reinforcing steel. Artificial rock structures depend on rebar to support and distribute the weight of their

concrete shells. That steel must be properly positioned and encased in concrete. “The steel has to be encased in concrete, or there’s no longterm structural integrity,” Lewis explained. “I’m not saying anybody’s doing this on purpose, but if you don’t know, you don’t know.” When exposed rebar encounters moisture inside a hollow structure, corrosion can gradually destroy the reinforcement. “Even small cracks can allow water to enter. That accelerates deterioration and compromises a structure that has to hold up thousands of pounds of concrete,” Lewis said. “When that steel is gone, the concrete just falls in on itself.”


Warning Signs Homeowners Shouldn’t Ignore An artificial rock feature can look normal while significant deterioration occurs internally. Lewis frequently encounters structural problems with slides, particularly where the slide trough meets the surrounding rockwork. Hairline cracks aren’t necessarily signs of imminent failure. More serious warnings include widening cracks, separating surfaces, failing stairs and loose concrete. “When you see those cracks heave, like split and become on two different planes,” Lewis said, “that’s a huge indication that you have a structural problem.” During one inspection, Lewis discovered virtually none of the original reinforcing steel remained, even though the adjoining slide still appeared sound.

When Repairs Aren’t Enough Rockworks routinely repairs artificial rock features when the underlying structure remains viable. But Lewis draws a firm distinction between cosmetic damage and

structural failure. “When the slide is heaving, when you have chunks of concrete falling off, and you can look inside and there’s not a stitch of steel left, it needs to be torn down,” Lewis said. He learned the consequences of ignoring that distinction after a homeowner requested cosmetic repairs to a compromised slide. Despite signing a waiver acknowledging the repairs weren’t structural, the homeowner later experienced another failure. According to Lewis, the Arizona Registrar of Contractors ultimately required the pool company to correct the problem.

Building It Right Preventing these failures begins with engineering. Rockworks positions reinforcing steel so concrete can completely surround it during application, protecting the reinforcement while providing the strength required to support the structure. On a recent San Tan Valley project, Rockworks used approximately 34 yards of shotcrete and incorporated No. 4 rebar in a double

mat. The structure was formed, poured and vibrated to ensure the reinforcement was properly encased. That additional work isn’t necessarily visible in the finished product. Two artificial rock features can look nearly identical while having substantially different structural integrity. For builders selecting a rockwork contractor, Lewis recommends examining construction methods, engineering requirements and how the reinforcement will be protected. He also photographs projects during construction to document what lies beneath the finished surface. Waterfalls, grottoes and slides aren’t merely decorative features. They’re engineered structures supporting substantial loads in environments where people climb, jump and play. When deterioration becomes visible, determining what’s happening beneath the surface is far more important than simply restoring the appearance of the rockwork.

Read the entire article.


The Hidden Savings of

BY: ALISE EVERTON PHOTO: PRECISION POOL RESTORATION

OFF-SEASON POOL REMODELING

F

or many homeowners, pool remodeling is easy to postpone during summer. Worn plaster, damaged coping and aging equipment can wait when the family is using the pool every weekend. But once swim season ends, those problems become harder to ignore. According to Jeff Moore of Precision Pool Restoration, a Texas-based remodeling company, that’s when homeowners begin taking action. “It’s like a light switch that turns on,” Moore said. “After Labor Day, the phones start lighting up.”

Reinvesting in Existing Pools With new pool construction substantially more expensive than it once was, homeowners are increasingly choosing to renovate rather than replace their existing pools. “A new pool can easily run north of 65 grand,” Moore said. “Now, a

renovation gets you most of what people want — fresh surface, new tile, updated equipment, maybe even a sun shelf — for a fraction of that.” Projects increasingly extend beyond cosmetic improvements. Homeowners are adding spas, tanning ledges, automation, LED lighting and variable-speed pumps to make their pools more functional and economical to operate. “It used to be about looks. Now it’s convenience and ease of ownership,” Moore said. “Automation, variable-speed pumps that cut the power bill, LED lighting. People want the pool to be easy.”

When Cleaning Stops Fixing It After a full summer of use, homeowners should inspect their pools for stained or rough plaster, cracked tile, damaged coping and recurring leaks. Problems that persist despite proper cleaning and

20 POOL MAGAZINE - VOL 6, ISSUE 3

water chemistry may indicate more serious deterioration. “A lot of what looks cosmetic isn’t,” Moore explained. “Plaster isn’t paint. It’s a waterproofing layer. So cracked tile and coping let water get behind the shell and under your deck. If it involves a surface, a structure, or water going somewhere it shouldn’t, it’s not cosmetic.” Delaying necessary repairs can substantially increase the eventual cost. Moore says addressing a $15,000 problem early can sometimes prevent it from becoming a $30,000 repair. “A small leak today doesn’t really wait for your cash timing,” Moore said. “If you have a crack or something, it only gets worse and more expensive.” When budgets are limited, he recommends addressing structural problems, leaks and failing equipment before spending money on cosmetic upgrades.


Getting Ahead of the Rush

Weather and Timing Matter

Fall gives homeowners an opportunity to schedule renovations before contractors face the seasonal rush. Waiting until spring can mean longer lead times, fewer scheduling options and potentially higher prices as material and labor costs change.

Fall remodeling still requires planning, particularly when plaster is involved. Moore cautions against plaster installation when temperatures fall below approximately 50 degrees.

“The last thing you really want to do is wait until spring because that’s when everybody else gets in line,” Moore said. “Then all of a sudden you have a big rush of people waiting before they’re ready to get in their pool.” Starting earlier also gives homeowners more time to compare finishes, select equipment and make design decisions without sacrificing valuable summer swimming time.

While the construction portion of many renovations may take only one or two weeks, newly plastered pools require another 28 to 30 days of brushing and careful water chemistry management. “Start in the fall or winter, and all that’s behind you before it gets warm,” Moore said. Before hiring a contractor, homeowners should evaluate the pool’s condition, identify necessary repairs and establish priorities. Moore recommends homeowners inspect plaster, tile, coping and

equipment, while watching for unexplained increases in water consumption that could indicate a leak. Selecting the right contractor is equally important. “Who you pick matters because the process is what you’ll remember,” Moore said. Ultimately, starting in the off-season gives homeowners time to make decisions they’ll live with for years, rather than rushing to finish before summer. “You start in fall; you’ve got room for lead times, weather, and changing your mind,” Moore said. “Rushed decisions are how people end up with pools that they don’t love.”

Read the entire article.


®

®

February 26-27 2027

Orange County Convention Center, Orlando

FLORIDA IN FEBRUARY Warm sun, hot leads, cool networking!

WHY ATTEND?

The numbers tell the story:

5,700+ REGISTRANTS 270 EXHIBITING COMPANIES 65+ EDUCATIONAL COURSES 53,000+ SQ. FT. OF PRODUCTS, INNOVATION AND NETWORKING

RESERVE YOUR BOOTH SPACE OR REGISTER TO ATTEND TODAY!

UNDERTHESUNEXPO.COM

Presented by


www.poolloan.net | marketing@poolloan.net | (904)-686-1702

All new builder-friendly If we can’t fund it, draws and loan programs your customers will love! no one can.

What you want to know :

-The Viking Capital guarantee.

Apply today, access funds today

Why we can’t be beat:

Terms up to 20 years

Highest approval rates Underwriting as fast as 24 hours Fixed rates as low asDecisions 6.99%* in as fast as 2 days Loans for scores as low as 620 Stated income loansNo-Income-Verification for self-employed borrowers options of transparency and trust No impact on credit25 atyears application

Loans up to $200,000

for veterans and first responders TheDiscounts best “first look” in pool financing.

Join our network:

Take advantage of our Marketing materials builder-partner Webinars on selling financing services: Real time customer updates in our portal A personal account manager

Real-time updates on all active All completely free! portal loans in our online Complimentary marketing Talk to a real person any time: Complimentary informational Join our network (904) 686-1702 webinars poolloan.net/partner*Rates as of 4/1/26 and subjectYour to change without notice personal account manager network/


AquaLink Edge & trackr iO SIGNAL A NEW DIRECTION FOR AUTOMATION

F

BY: SUSIE CUEBAS

or years, pool automation has focused primarily on convenience, giving homeowners an easier way to control pumps, heaters, lighting and other equipment. Fluidra’s next-generation AquaLink EDGE platform is being developed around a broader concept: connecting equipment, sensors and software to provide a clearer picture of how a pool is actually performing. Alongside EDGE, Fluidra is developing trackr iO, a software platform intended to turn that information into actionable intelligence for pool service companies. “The biggest difference here is that current automation in the market just focuses on mainly the convenience of getting things turned on and off,” said Jeremy Young, Director of Product

Marketing for Automation at Fluidra. “With this automation system, we were able to start from the ground up, and we’re building an ecosystem of automation and equipment working together, focusing on the data that the equipment produces and other sensors produce.”

Making Swimming Pool Automation Easier to Work With One of Fluidra’s priorities was simplifying installation and programming. EDGE consolidates setup functions, supports existing Jandy equipment and provides a foundation for future connected products. Reusable configuration templates are also in development. The system includes a five-inch display inside the equipment enclosure, giving technicians access without relying on their phones. Processing occurs locally, allowing

24 POOL MAGAZINE - VOL 6, ISSUE 3

primary automation functions to continue when internet service is unavailable. Fluidra also found that homeowners wanted more than smartphone control. According to Young, more than 70% of consumers surveyed preferred a dedicated interface inside the home. Every EDGE system consequently includes a 10-inch indoor display, providing convenient access for homeowners, guests and vacation-rental occupants. EDGE supports 5 GHz Wi-Fi, is optimized for mesh networks and allows app pairing through a QR code. Together, these improvements address everyday frustrations at the equipment pad while simplifying installation and daily operation, improving connectivity and laying the groundwork for a more connected, efficient and responsive approach to pool maintenance.


Connecting the Equipment Pad to the Business “With EDGE we can give you the status, how things are going,” explained Orlando Gadea, Vice President of Global Digital Marketing and Customer Experience for Fluidra. “With trackr iO, we let you actually take actions.” An equipment fault or waterchemistry issue could eventually trigger a workflow to schedule service and assign a technician. Rather than waiting for a homeowner to report a problem or discovering it during the next weekly visit, a company could receive an alert when something goes wrong. “With EDGE and trackr iO, when the pump stops working, you’ll be the first one to know it,” Gadea said. “You’ll see in your dashboard, ‘The pump in this home is down. Do you want me to schedule a repair job?’”

Connected equipment could also change how technicians troubleshoot problems. Existing Jandy products already provide certain diagnostic information, while newer equipment is being designed to report considerably more operating data. Young pointed to SpeedSet Plus, which will contribute 28 data points to Fluidra’s system. That information could eventually help identify developing problems before equipment fails. “I think that we’re going to be increasingly empowering pool pros to understand what’s happening with less tribal knowledge,” Young said. For newer technicians, access to equipment readings and service history could shorten the learning curve. Experienced professionals would still need to interpret the information and perform repairs, but more detailed diagnostics could narrow the possibilities

26 POOL MAGAZINE - VOL 6, ISSUE 3

before they arrive.

The Shift Toward Predictive Maintenance Fluidra envisions service schedules driven by actual pool conditions, allowing companies to prioritize urgent problems and deploy technicians where they’re needed most. “If the pool doesn’t need service this week, that can free a resource up to go do something else and generate business elsewhere because the pool’s being taken care of right now,” Young said. For service companies, the potential extends beyond convenient automation. Earlier fault detection, better diagnostics and more informed scheduling could fundamentally change how they manage hundreds of pools— and how quickly their technicians can respond when something goes wrong.

Read the entire article.


A Refined Expression of Pattern & Light

TRADE PROFESSIONALS

www.aquablumosaics.com | 800 - 971 - 1442

Register for Complimentar y Samples Scan to Join AquaPRO


WYBOT Pushes Robotic Pool Cleaning

TOWARD MORE AUTONOMY

R

BY: MARCUS PACKER | PHOTOS: WYBOT

obotic pool cleaners have evolved rapidly, with cordless operation, smarter navigation and app connectivity changing what homeowners expect. WYBOT is taking that evolution further, developing cleaners designed to handle more of the maintenance process without human intervention. Although relatively new as a consumer-facing brand, the company behind WYBOT has manufactured robotic pool cleaners for more than two decades. “We’ve actually been around for 20-plus years manufacturing robotic pool cleaners,” said Nathaniel Michaelis, General Manager and Vice President of the Americas for WYBOT. “About three years ago, we were innovating on behalf of

28 POOL MAGAZINE - VOL 6, ISSUE 3

other brands and we said, ‘Hey, why aren’t we doing this for ourselves?’

From Cordless to SelfCharging WYBOT divides its lineup into two product families. The C Series brings cordless cleaning and features such as AI-assisted debris detection to more accessible price points. The premium S Series offers longer run times, greater cleaning capacity and increasingly autonomous operation. The S2 Solar and S2 Solar Vision address a persistent inconvenience of cordless cleaners: retrieving them after each cycle to recharge. Instead, the robots return to an in-water docking station powered by a solar panel positioned at the pool’s edge. “The sun charges the base. The base then charges

the robot,” Michaelis explained. “The robot then can be set on a schedule to run Monday, Wednesday, Friday or however many days the pool owner would like it to run during the week.”

Taking Automation Another Step Further WYBOT’s newest S3 adds selfemptying capability. After cleaning, the robot returns to its dock and transfers collected debris into a separate poolside bin. Owners or service technicians simply remove and empty the collection tray. The progression reflects WYBOT’s approach to product development. Cordless operation eliminated tangled cables, solar docking removed routine charging, and selfemptying reduces another recurring maintenance task.


The Push Toward Greater Autonomy For Michaelis, who previously worked in consumer robotics at iRobot, the direction of the industry is clear. “In any robotics industry, your goal is to make the user experience as autonomous as possible,” he said. “You want as little human interaction with your robots.” WYBOT’s S Series reflects that philosophy. Scheduled cleaning, intelligent navigation, solar charging and automatic debris collection are gradually transforming robotic cleaners from accessories that homeowners must manage into equipment capable of handling routine cleaning independently. “Where I see the robotic pool cleaning industry heading is trying to make it as autonomous as possible,” Michaelis said, “trying to reduce the amount of human interaction that you have with your robots, and ensuring that they’re doing the jobs that they’re set out to do.”

A Selling Point for Pool Pros For pool professionals, increasingly autonomous cleaners offer another way to enhance the ownership experience. Demonstrating a robot that parks, recharges and empties itself can help prospective customers understand how much routine maintenance can happen automatically. Michaelis sees premium robotic cleaning as a finishing touch for new pool packages. “On the pool pro side, it’s really going back to that innovation piece,” he said. “It’s a surprise and delight moment at the time of purchase.” Rather than simply offering another equipment upgrade, builders and service technicians can introduce technology that makes pool ownership more convenient.

Helping Service Companies Work More Efficiently For service professionals, the benefits extend beyond homeowner convenience. A robotic cleaner operating between weekly

30 POOL MAGAZINE - VOL 6, ISSUE 3

visits can handle a portion of the physical cleaning workload before a technician arrives. Michaelis said WYBOT regularly hears from service companies using robotic cleaners to improve route efficiency. “We constantly hear feedback from service companies on how many more doors they’re able to service, how many more pools they’re able to service, how quickly they can get pools done so that they can get to the next customer, and how many more they can fit within their route,” he said. Some companies have even made robotic cleaning equipment a requirement for accepting new service customers. Autonomous cleaners won’t replace professional service, but they can reduce time spent removing debris, allowing technicians to focus on other tasks. With scheduled cleaning, solar charging and selfemptying, WYBOT’s S3 brings the company closer to a cleaner requiring attention only when its collection tray is full.

Read the entire article:


A note about Adaptive Flow™ from the company that coined it.

We defined the term, set the standard, and built the technology.

Adaptive Flow™, as H2flow Controls™ pioneered it, involves actual metered flow measurement that responds to environmental stressors like filter loading, valve changes, and system drift. Some products are using the term without the technology. That distinction is worth defending, so we’re saying it plainly: Adaptive Flow™ is a standard. Only Nautis VSF meets it.

™ Nothing else is Adaptive Flow™ Shop: www.nautisvsf.com


Unboxing: iGarden’s K Series Robotic Cleaner WHAT WE LEARNED AFTER MONTHS OF TESTING BY: MARIANNE TRUSTY PHOTOS: KELLI CLANCY

R

obotic pool cleaners can perform impressively in demonstrations, but everyday conditions tell a different story. To evaluate the iGarden K Series, Pool Magazine enlisted Kelli Clancy, owner of Legacy Pool and Spa in Sacramento, who placed the cordless cleaner in a customer’s pool for an extended test. The older freeform pool presented plenty of challenges, including irregular curves, narrow steps and surrounding landscaping that deposited everything from small leaves to pine needles.

Putting the K Series to Work Clancy wanted honest feedback from a homeowner who would

32 POOL MAGAZINE - VOL 6, ISSUE 3

put the cleaner through its paces. An unrelated circulation problem had also left the pool dirtier than usual when testing began. The K Series made a favorable first impression with its compact design, fine-mesh filtration and straightforward charging. Unlike the homeowner’s previous cleaner, it didn’t require a dedicated charging base. “She liked on this one you could just plug it anywhere,” Clancy said. “You didn’t have to put it on a base, and it charged within three hours. She really liked that aspect of it.” The cleaner handled floor and wall cleaning, climbed to the waterline and even reached the tanning ledge.

Handling Real Backyard Debris Clancy was particularly impressed by its ability to collect leaves and other material. “I think they got right with the tracks on the front where it’s collecting the debris,” Clancy said. “Those were very grippy, and when I watched it go over a pile of leaves, it was able to pull them in easily.” Behind that performance is a 4-liter debris basket paired with 180-micron filtration. For heavier cleanups, the K Series also features a Turbo mode that increases cleaning power. Switching between floor-only cleaning and combined floorand-wall cycles, was easy as well.


SUPERIOR BOND COAT & WATERPROOFING FOR YOUR NEXT CONCRETE PROJECT:

BASE CR E TE USA.COM


Where Pool Geometry Matters The K Series performed well on walls and the waterline, but the test pool’s irregular shape exposed some limitations. Its wide wheelbase made certain narrow steps difficult to navigate, while the older freeform pool’s curves occasionally presented challenges. “This particular issue may not be an issue in other pools, depending on the width of the steps,” Clancy explained. The pool’s steps were approximately 10 inches wide. Clancy believes the cleaner would likely perform better in pools with more conventional geometry.

Ease of Use and Everyday Convenience Despite those challenges, Clancy found the K Series straightforward to operate. Programming took only a few minutes, and the homeowner particularly appreciated the included retrieval hook, which made removing the cleaner from the pool easier than with her previous robot. “Easy to program,” Clancy said. “It

was pretty easy to program. I think that thing took maybe five minutes tops to program completely.” The primary area Clancy identified for improvement was app connectivity. Communication with the cleaner became less reliable once it was submerged, although that didn’t prevent it from performing its regular cleaning functions. The combination of simple charging, effective debris collection and uncomplicated operation made a favorable impression over the extended testing period.

Who Is the K Series For? Clancy sees the K Series as an option for homeowners purchasing their first robotic cleaner, particularly those who want cordless convenience without investing in the most expensive equipment available. “I would say it’s gonna be that middle ground customer, someone who’s looking for something that’s not the cheapest but not the most expensive,” she said. “Maybe more of your entry level robotic owner.”

The cleaner’s performance also demonstrated why matching equipment to a particular pool matters. Its ability to climb walls, clean the waterline and collect different types of debris was evident, but narrow steps and complex curves could affect its navigation. After months of testing, Clancy was impressed by its cleaning performance and suitability for firsttime robotic cleaner owners. The homeowner appreciated its quick charging, simple programming and easy retrieval, while Clancy valued its ability to handle everyday debris. Having watched the cleaner operate in a customer’s backyard and gathered feedback throughout the test, Clancy offered her assessment. “I could see this being a cleaner that I would recommend to people,” she said. “And I don’t recommend just any cleaner. I want something that actually works because it’s not a small price tag to get a robotic pool cleaner.”

Read the entire article.


EXPERIENCE THE DIFFERENCE OUR DIFFERENCE

People. Partnerships. Products. Everything we do is built for the trade.

NEW INTEGRATION

With JobTread construction management software you can browse live POOLCORP catalog items, add materials to budgets, and streamline purchasing in one workflow.

Trusted by over 120,000 wholesale customers around the world.

CONTACT YOUR LOCAL REPRESENTATIVE OR SHOP POOL360 ® TODAY THE LOCAL PARTNERS YOU TRUST COMMERCIAL AQUATICS

The Commercial Pool Supply Specialists!


Putting Nano-Set to the Test: WHAT PLASTERERS ARE SEEING IN THE FIELD

G

BY: ALISE EVERTON | PHOTO CREDIT: POOL BOY PLASTERING

etting experienced plasterers to change their preferred mixes isn’t easy. Any new additive must prove itself during application and after the pool is filled. For Jason Evans of Pool Boy Plastering, Nano-Set by Sabal Green Group has done both. The liquid colloidal silicate admixture is designed to reduce common plaster problems, including pigment loss, plaster dust, permeability and pH fluctuations during startup. Evans initially tested Nano-Set on a handful of projects before introducing it across his company’s work. “We were kind of cautious, but once we used it, the crew liked it, and that’s very important,” Evans said.

Fewer Problems After Startup What ultimately convinced Evans wasn’t simply improved workability. It was the reduction in problems after his crews finished their jobs. “When I first heard about it, you hear these claims, it helps with the pH on the startup, it strengthens the plaster. It prevents some issues that have always been there with cement products that are underwater,” Evans said. “And you hear these claims and, finally I tested it, and sure enough, we find there’s a lot less warranty calls.” Evans reported fewer complaints about mottling, an occasional problem his South Florida company had encountered around main drains and other areas. Nano-Set reacts with calcium hydroxide produced during

36 POOL MAGAZINE - VOL 6, ISSUE 3

cement curing, forming calcium silicate within the cement matrix. The process is intended to reduce plaster dust and help moderate the elevated pH commonly encountered during startup. Evans said those changes have made balancing newly filled pools considerably easier. “It’s just an easier startup. Much fewer chemicals. It’s just easier to balance out your water, and that tends to result in less staining,” Evans said. For plaster contractors, fewer startup problems mean less time responding to callbacks, investigating finish complaints and addressing water chemistry issues, allowing crews to focus on completing new projects, maintaining production schedules, reducing unnecessary expenses and keeping customers satisfied.


PRE-CONFERENCE: Nov. 14-16, 2026 EXPO & CONFERENCE: Nov. 17-19, 2026 New Orleans, LA

America’s Pool & Spa Marketplace YOUR NEXT SEASON STARTS HERE PSP Expo is your ultimate resource to: Expand your knowledge through expert-led education & business development. Discover new releases that improve your business. Build connections with suppliers, industry experts, and professionals from across the country. Grab a seat at PSP Expo’s $8 billion marketplace, and start your next season at PSP Expo in New Orleans!

For a free expo pass courtesy of Pool Magazine, use promo code POOLMAG26

Register poolspapatio.com

Sponsored by:

Registration discounts are not applicable to Manufacturing Agents/Dealers, nonexhibiting Manufacturers/Distributors, or Wholesaler registrations. Discounts apply to new registrations only; no refunds are issued for pre-exisiting registrations.


What Changes for the Plaster Crew on the Job? Nano-Set also changes how plaster behaves during application. Evans said his crews adjust the water content to maintain their preferred consistency, while the admixture slightly slows setting time. In South Florida’s summer heat, that additional working time can be beneficial, particularly on sunexposed walls where plaster can tighten up quickly. “My finishers describe it as a little more juicier,” he said. “It seems to bring more cement cream available for the finishing, so it tends to work out to be a smoother, flatter surface using Nano-Set.” Evans sees another advantage when exposing aggregate finishes. The admixture helps hold the cement matrix together during water washing, reducing the risk of overexposed areas that create visible inconsistencies. “The real gold for us is the exposure,” he said.

When Fewer Callbacks Pay for the Product

Pool Boy Plastering initially absorbed the additional material cost while evaluating Nano-Set. As more projects were completed, Evans found that fewer callbacks and easier startups helped offset the expense. “We figured that we would just eat it, right? We said, let’s try out this product and it seemed to be working good,” he said. “And now we kind of found that with the reduced callbacks and with the easier fire-ups, it basically pays for itself.” Those savings extend beyond materials. Investigating finish complaints, explaining curing issues and returning to completed projects can consume considerable time. Fewer callbacks also free up experienced crews for more profitable work.

Putting It to Work on a Showcase Pool A large project for Pool Crafters’ Rocky Miller provided another opportunity to evaluate the admixture. The pool featured an extensive lazy river, natural and artificial rockwork, and a PebbleTec

Tropical Breeze finish with additional Shimmering Sea abalone shell. Miller wanted to preserve the finish’s color without scaling eventually leaving it looking lighter. Evans had already used NanoSet on approximately 20 pools completed for Miller, providing a track record for the larger project and greater confidence in the finished appearance. “He did notice that the startups were easier, and he hadn’t got any calls on pool scaling,” Evans said. For Evans, the decision to incorporate Nano-Set into every job came down to what happened in the field. His finishers appreciated the workability, startups became easier, and fewer appearancerelated complaints meant less time returning to completed pools. What began as a cautious trial has become a standard part of Pool Boy Plastering’s production process.

Read the entire article.


Sacred Geometry: WHERE ARCHITECTURE, MATHEMATICS, AND MOSAICS COLLIDE

BY: JOE TRUSTY PHOTOS: MAX APRETURE | MOSAICIST

A single architectural detail inspired a captivating pool interior where mosaics and centuries-old design traditions converge.

S

ome of the most memorable pool designs begin with a grand architectural concept. For Ray Corral, founder and creative director of Mosaicist, the inspiration for this South Florida project came from something much smaller: a single window. The ultra-modern residence offered few decorative cues, but one architectural detail immediately caught Corral’s attention. “The first thing that popped out at me was this recessed trapezoid window on the corner of the house,” Corral recalled. “It was one architectural element that kept getting my attention.” That window became the design language for an elaborate mosaic interior featuring a repeating geometric pattern that appears to rise from the pool floor. “We always try to bring in a design that ties into the architecture of the home,” he explained. “It gives the project a story, and it’s something the client can relate to.” The challenge was transforming that simple architectural element into something spectacular without overwhelming the clean contemporary design surrounding it. For Corral, the answer came through mathematics, proportion, tonal contrast and an optical illusion rooted in centuries-old mosaic traditions.

40 POOL MAGAZINE - VOL 6, ISSUE 3


Contrasting faces create dimensional form, while repeating patterns connect the contemporary mosaic to traditions of sacred geometry. POOL MAGAZINE - VOL 6, ISSUE 3 41


Depending on your frame of reference, the finished mosaic might evoke the geometry of ancient Greece or the unmistakable cubes of the 1980s arcade game *Q*bert. Either comparison works. The illusion is created by contrasting faces arranged to make a completely flat surface appear threedimensional. “The client wanted something spectacular that no one had ever seen,” Corral said. “This threedimensional repetitive pattern hasn’t been done like this on the bottom of a pool. But these types of patterns go back to old-world mosaics.” The visual trick is centuries old. Artists have long used repeating geometric patterns, changes in orientation and contrasting tones to suggest depth where none actually exists. The cube itself goes back even further as a mathematical symbol. Plato associated the cube, or hexahedron, with earth, connecting

its stable form with one of the classical elements. For Corral, the challenge was taking that familiar geometric language and making it work at the scale of a swimming pool. What looks convincing on a drawing still has to maintain the illusion when stretched across the floor of a large vessel, viewed from different angles and distorted by moving water. Color became a critical part of making that happen. Each apparent cube depends on tonal differences between its faces to create depth, but too much contrast could overpower the reflective qualities of the pool itself. That was particularly important because the mosaic had to coexist with two defining architectural features: a Lautner edge and negative edge. Corral wanted the pattern to remain visible without diminishing the reflections those

42 POOL MAGAZINE - VOL 6, ISSUE 3

features were intended to create. Mosaicist developed custom tonal variations within its Celestial Series and tested them submerged before settling on the final palette. “We had to make custom color tones, install them and submerge them in the pool at my home to see which ones worked best,” Corral said. “There was a lot of trial and error.” Water was only one variable. The team also studied sunlight and important sightlines from the residence, including the second-floor primary bedroom. Corral wanted the simulated shadows within the mosaic to correspond convincingly with the natural shadows surrounding the pool. “When you look at it, you’re thinking, ‘This thing is really 3D,’” Corral said. “We had to put all those formulas together and get the color tones right to make it come alive.”


The Art of Engineering

Since 1980, Aquamatic pool covers have focused on safety, energy savings and ease of use. With our technology, we are setting a higher standard through innovation and design. Supported by a 20 year mechanical warranty, and the most standard features of any automatic cover in the industry. Hydramatic • all-fluid hydraulic drive • one-fourth the moving parts • zero lubrication & self-adjusting HydraLux • unique trackless design can cover virtually any pool • the only energy saving insulated automatic cover • manufactured exclusively in the USA

800.262.4044

aquamatic.com


Making the Math Fit the Pool Designing the illusion was one challenge. Making it fit an existing swimming pool was another. By the time Mosaicist became involved, the shell had already been constructed, leaving the team to adapt an exacting geometric pattern to dimensions and contours that could no longer be changed. “The shell was already shot, so now we had to make a design that fit perfectly,” Corral explained. The homeowner also wanted a dedicated swim lane, adding another linear element that had to work within the composition. The cube pattern fit three rows across the width of the main pool floor, but getting it to resolve across the entire length required some visual sleight of hand. “We had to make those squares a little smaller and then smaller again,” Corral said. “Your eye surprisingly doesn’t catch it. You can’t even really catch it in an aerial photograph, but we had to arrange the mosaic cubes

that way to make everything fall correctly.” The contours of the existing vessel presented another problem. Because the pool floor had too much of a concave shape, it had to be floated before the mosaic could be installed. With a repeating geometric pattern, even minor variations could bend straight lines, alter proportions and undermine the three-dimensional effect. “There were a lot of numbers involved in this one,” Corral said. “We had to float the floor because it had too much of a concave shape. Otherwise, the pattern wasn’t going to fit right.” Bringing the concept to life required close coordination between Mosaicist, Environmental Design Group and Southern Pools. Environmental Design Group helped establish the architectural direction and brought Corral into the project. Mosaicist developed, manufactured and installed the mosaic, while Southern Pools constructed the vessel.

44 POOL MAGAZINE - VOL 6, ISSUE 3

“It was absolutely a complete team,” Corral said. “It’s not only how we’re going to design and manufacture it. It’s how we’re going to install it and make the whole thing work.” For Corral, the finished pool became more than another custom installation. He described the project as a “glass ceiling breaker” for Mosaicist, demonstrating how geometric and three-dimensional mosaics could complement contemporary architecture without feeling ornamental or out of place. In the end, that may be what makes the project work so well. The design never feels like artwork dropped into the middle of an unrelated swimming pool. What began with a recessed trapezoidal window became part of the visual language of the entire backyard. The calculations, color studies, installation adjustments and trial and error were ultimately in service of one deceptively simple idea: making the pool feel as though it had always belonged to the house.

Read the whole article.


Find out more at:

masterpoolsguild.com /mpg-membership/

The Mark of Pool Perfection We unite the best pool-building talent across the globe, creating a network of shared ideas, expertise, and creativity. Each member is hand-selected for their elite skills and craftsmanship, plus their dedication to providing the best possible service to their customers. Together, we share, inspire, and support one another to push the boundaries of pool design and innovation.

For more information, email: mpg@masterpoolsguild.com or call: (800)392-3044


T H I S I N D U S T RY B U I L D S MORE THAN POOLS. WE BUILD MOMENTS. Hayward, Hayward & Design, and the H logo, are a registered trademark of Hayward Industries, Inc. © 2026 Hayward Industries, Inc.


WE HAVE YOUR BACK WITH OVER A CENTURY OF PROUD AMERICAN INNOVATION.

TriStar VS 900/950 Pumps with OmniX built in Clemmons, NC.

Universal H-Series Gas Heater with OmniX built in Nashville, TN.

SwimClear C275S Single Element Cartridge Filter built in Clemmons, NC.

LEARN MORE AT US.HAYWARD.COM


Beyond The Hot Tub:

BY: SUSIE CUEBAS PHOTO CREDIT: BULLFROG SPAS

DESIGNING THE BACKYARD WELLNESS EXPERIENCE

N

ot long ago, a hot tub was considered the ultimate backyard luxury. Today, homeowners are BY GENESIS (PHTAoutdoor wellness creating complete environments centered around hot tubs, swim spas, saunas, cold plunges, fitness, recovery and connection.

“High-end home projects now include dedicated wellness features, and residential installations are among the fastestgrowing in the category,” he said. “Interestingly, the hot tub tends to anchor these designs, becoming the foundation on which everything else is built.”

“Wellness has replaced luxury in the sense that people increasingly view these as investments in daily health rather than status symbols,” said Jake Ricks, Vice President of Marketing and Customer Experience with Bullfrog Spas.

But creating a successful wellness space isn’t simply about adding more products. Vic Walker, Toro product marketing manager and former product design manager for Dimension One Spas, says great spa design begins with understanding how people will actually use it.

That shift is changing the sales conversation for pool and spa professionals. Rather than evaluating a hot tub or swim spa strictly as a standalone purchase, homeowners are considering how water, heat, exercise, landscaping and gathering spaces can work together. Ricks says the hot tub frequently becomes the centerpiece.

48 POOL MAGAZINE - VOL 6, ISSUE 3

That philosophy extends from hydronomics — the relationship between water movement, pressure, jet placement and the human body — to the way people sit, move and interact inside a spa. It’s why Walker cautions against assuming a higher jet count automatically translates into better hydrotherapy. A smaller number of strategically positioned jets may

accomplish more than a larger number added primarily to increase a product specification. The same thinking applies to seating. People have different body types and therapeutic needs, move between seats and often want to interact with others around them. A thoughtful layout accounts for those behaviors. Personalization is becoming part of that equation as well. Bullfrog Spas, for example, uses its interchangeable JetPak Therapy System to let owners select and position different hydromassage experiences. Walker applied similar thinking while working on the Amore Bay, positioning captain’s chairs opposite a family bench so adults could enjoy dedicated hydrotherapy while remaining oriented toward children, family or friends. The principle behind both approaches is straightforward: features should serve the people using them, not the other way around.


Hot tubs may be wellness products, but they are also inherently social spaces. Increasingly, that sense of connection extends beyond the spa itself. “The spa becomes a place where families put their phones down and reconnect,” Ricks said. “Couples and families report that it becomes a distraction-free space to communicate.” Homeowners are building around that experience, incorporating hot tubs alongside saunas, cold plunges, fitness equipment and swim spas, then surrounding them with shade, seating, fire pits and other features designed for gathering. Walker has watched that transformation happen in his own backyard. “There was grass there before. We never hung out as a family in the backyard to sit in the grass,” he said.

As backyard wellness products become more sophisticated, some of the most important innovations are focused on making them simpler to own. Smart monitoring, automated water care and connected technology increasingly target one of the biggest barriers to long-term enjoyment: maintenance.

Five years after adding a swimming pool, along with umbrellas, furniture, multiple fire pits and an outdoor projector, the space has become a regular gathering place for family and friends. “A well-designed product should cater to multiple needs, including solitary relaxation, social hosting, and recovery,” Walker said.

Automated monitoring and dosing, supplemental oxidation technologies, mineral systems and improved filtration can reduce portions of that workload. They don’t eliminate the fundamentals — proper sanitizer levels, balanced water, filtration and periodic testing remain necessary — but they can make routine care more manageable.

That same emphasis on versatility is helping swim spas find their place within the backyard wellness category which occupy a middle ground between traditional swimming pools and hot tubs. Their compact footprint and year-round usability appeal to homeowners looking to combine low-impact exercise and recreation.

Walker believes owners also shouldn’t need to become water chemistry experts simply to enjoy their spas. Future systems, he says, should translate complicated water-care information into straightforward guidance: when everything is good, when something needs attention and when it’s time to call a professional.

For homeowners without the space or desire for a conventional swimming pool, they also offer another way to incorporate usable water into the backyard. “People have always loved water. It’s elemental,” Ricks said. “As humans, we intuitively understand its therapeutic power, especially when it’s hot, and increasingly when it’s cold too. Owning a little bit of therapeutic water right at home is a pretty natural draw. It’s convenient, it’s private, and it’s available whenever you need it.” How the swim spa will actually be used remains important. Exercise-focused buyers may prioritize the swim current and activity area, while families may place greater value on seating, recreation and versatility. In either case, the larger appeal is much the same: creating another reason to step outside, spend time in the water and use the backyard more often.

“Water care is the other area that can detract from the hot tub experience,” Ricks said. “If it feels confusing or goes wrong, it takes a bit of the joy out of ownership.”

Ease of ownership also extends beyond water chemistry. As spas become part of more sophisticated outdoor environments, homeowners increasingly expect them to look like they belong there. Recessed installations, custom surrounds and other design solutions can soften the traditional boxy appearance of an above-ground spa while preserving the access technicians need for service and maintenance. Ultimately, the evolution of backyard wellness isn’t simply about adding more amenities or technology. It’s about eliminating the friction that prevents people from enjoying them. The products that succeed won’t necessarily be those with the most jets or the longest feature list. They’ll be the ones that are comfortable, personal, easy to maintain and designed around how people actually live.

Read the entire article.


Ready When You Are: THE CHANGING ROLE OF AUTOMATIC COVERS

T

BY: MARIANNE TRUSTY | PHOTOS: AQUAMATIC COVER SYSTEMS

here is a difference between owning a swimming pool and having one that is ready to use. For many homeowners, automatic pool covers are increasingly part of what makes that possible. Before construction begins, homeowners spend months considering shape, finish, lighting and water features. Once the pool is complete, however, keeping the water clean, maintaining its temperature and managing operating costs become everyday considerations. Tom Dankel, vice president of Aquamatic Cover Systems, has worked in the automatic-cover business for more than four decades. He has watched covers evolve from products associated primarily with safety into systems that also address energy use, water conservation and maintenance.

“If you’ve got an uncovered pool that’s full of leaves and bugs, that’s very uninviting,” Dankel said. “A cover eliminates that. Your pool is cleaner and warmer, and consequently, you use the pool more.” Rising utility costs have made that convenience increasingly valuable. In California, average residential electricity rates climbed from approximately 23 cents per kilowatt-hour in June 2021 to 35 cents in June 2026, an increase of more than 50%. For heated outdoor pools, evaporation is a major source of energy loss. As water evaporates, heat escapes with it. Replacement water must then be added, chemically balanced and potentially reheated. “With evaporative loss, you have chemical loss, and then you have to reheat and retreat that water,” Dankel said. “You’re in this cycle

50 POOL MAGAZINE - VOL 6, ISSUE 3

of loss, replenish and regenerate. With a cover, you’re interrupting that cycle.” The financial benefits depend on climate, pool size, heating equipment, utility rates and how consistently the cover is used. Reduced evaporation also means less replacement water and fewer chemicals lost through evaporation. Dankel recalls a roughly 30,000-gallon pool at his former California home. When uncovered, its circulation pump typically ran eight hours daily. With regular cover use, he reduced that schedule to approximately two hours while maintaining the pool to his satisfaction. Beyond energy savings, keeping leaves, insects and windblown debris out of the water reduces routine cleaning and helps ensure the pool is ready whenever the family wants to swim.


Rectangular pools are straightforward candidates for automatic covers, but today’s homeowners increasingly want curves, integrated spas, raised walls and other architectural features. Those designs don’t necessarily rule out an automatic cover. Encapsulated tracks can create a rectangular cover zone within a larger freeform design, allowing surrounding curves and other features to remain outside the covered area. “If you have a freeform pool, you can create that picture frame around it using encapsulation,” Dankel said. “Whatever the pool shape is outside of that, you create the receiver for the track and then build the deck on top of it.” More complicated designs sometimes demand entirely different solutions. “We did a pool that was in the shape of a letter

U,” Dankel said. “We had three different covers coming out of the floor of the pool to be able to handle that.” Early planning is essential. Track placement, coping, elevations and mechanism locations must be coordinated before construction. Homeowners should also understand that not every cover provides the same protection. Trackless systems designed for unusual shapes may offer energy and maintenance benefits without qualifying as ASTM safety covers. For homeowners whose pools were built without automatic covers, remodeling presents another opportunity. Changing family circumstances, higher energy costs and evolving expectations often prompt owners to reconsider features they initially overlooked. Depending on the existing pool, renovations may accommodate

concealed components or require a retrofit system with visible tracks. Dankel estimates retrofit covers account for roughly 35% of Aquamatic’s annual production. Many customers begin researching the option themselves after purchasing a home or starting a family. “People who already own a pool are a great candidate for a retrofit cover,” Dankel said. “I’ve heard more times than I can count, ‘Had the builder only offered this to me at the time, I would’ve taken it.’” For pool professionals, an automatic cover provides another chance to introduce a feature that can fundamentally improve everyday ownership.

Read the entire article.


Hayward Bets Big on OmniX DECENTRALIZED AUTOMATION

F

or decades, pool automation has largely revolved around a centralized control panel mounted at the equipment pad. While effective, these systems require homeowners to commit to additional equipment, wiring and installation costs upfront. Hayward is taking a different approach with OmniX, building intelligence directly into individual pieces of equipment so homeowners can add connected control without installing a traditional automation panel. Ryan Morson, Vice President of Sales and Technical Excellence at Hayward Holdings, sees distinct opportunities for builders, service companies and homeowners. “I kind of think of it as three different buckets,” Morson explained. “I think about builders, servicers and homeowners, and the value proposition is a little bit different for each.”

BY: MARCUS PACKER

For builders, OmniX offers a simpler path to selling automation. Smartphone control can be included with compatible equipment without requiring a separate panel, additional wall space or extensive electrical work. Wireless pairing and appbased configuration also simplify commissioning and homeowner training.

residential pool.

The lower upfront cost raises another question: How does OmniX affect the total cost of ownership for homeowners adopting smart pool automation for the first time?

“To update an XE pump, for example, or one of our legacy fullfeatured variable-speed pumps, we’re talking five minutes or less,” Morson said. “You remove a little back plate on the back of the pump, connect the OmniX retrofit module, and you’re up and running within minutes. It’s equally easy to upgrade our full-featured gas heaters as well.”

“It doesn’t—we’re not increasing price to include OmniX,” Morson said. “We’re including it, and you can opt to use it or not. But ultimately, who wouldn’t use it?” That approach makes automation accessible to customers who might otherwise consider a centralized system too expensive or unnecessary for a straightforward

52 POOL MAGAZINE - VOL 6, ISSUE 3

For service companies, the optional OmniX gateway introduces remote access, allowing professionals to view and adjust connected equipment without necessarily visiting the property. Compatible legacy Hayward pumps and heaters can also be upgraded with retrofit modules.

The result is a connected equipment platform serving new construction and existing pools without requiring homeowners to purchase an entirely new automation system.


Automation, One Replacement at a Time

The Future of Decentralized Control

Perhaps OmniX’s biggest opportunity lies in changing how homeowners upgrade their existing pools. Instead of replacing an entire equipment pad, automation can be introduced gradually as individual components reach the end of their service lives.

As Hayward expands OmniX across its equipment catalog, the distinction between decentralized and centralized automation could become less pronounced.

“My personal favorite thing about OmniX is it really enables a servicer to fully automate a pad one piece of equipment at a time,” Morson said. “I think of it as a natural stair step.” A homeowner might begin with an OmniXenabled variable-speed pump, add a connected heater a year or two later, and eventually incorporate lighting and salt systems as those products become available. Functioning equipment can remain in place until replacement makes financial sense. For service companies, that creates opportunities to introduce connected technology during ordinary repair and replacement conversations rather than selling an expensive, all-at-once conversion. “OmniX really makes the pool easier to operate, more convenient to manage and more energy efficient without requiring homeowners to update, upgrade and replace all their equipment at once,” Morson said.

Where OmniX Fits Today The platform is currently best suited to straightforward residential pools with relatively simple equipment configurations. According to Morson, Hayward’s variable-speed pumps and gas heaters now incorporate OmniX, with lighting and salt systems on the near-term roadmap. Complex installations involving multiple bodies of water, extensive lighting, water features and broader backyard integrations remain better suited to Hayward’s OmniLogic or OmniPL systems. That distinction is important for builders deciding which platform to specify. OmniX provides an entry point for homeowners who want connected equipment without the cost and complexity of a traditional automation installation.

Morson acknowledged that the platform may eventually compete with some of Hayward’s existing automation products as additional capabilities become available. “It most likely will over time as we have more and more equipment that’s OmniX-capable and OmniX-compatible,” Morson said. “Our goal and mission is to increase the addressable market, lower the barrier for our homeowners and our customers and our trade partners to automation.” That willingness to accept overlap reflects a larger strategy. Hayward wants to reach homeowners who previously considered automation too expensive, while giving builders and service professionals another way to introduce connected equipment. Early customer and distributor feedback has highlighted savings from eliminating centralized-panel installation and wiring. The smaller equipment footprint is another advantage, particularly on crowded pads where available wall space is limited. For builders, that could simplify equipment selection on new projects, particularly when homeowners want smartphone control but don’t need the capabilities of a full automation system. Service professionals also gain flexibility when upgrading older pools, allowing them to introduce connected equipment during routine replacements rather than proposing an expensive overhaul. With its app infrastructure already established, Hayward expects to introduce additional OmniX-enabled equipment more rapidly. As lighting, salt systems and other products join the ecosystem, homeowners will have more opportunities to expand their connected pools without replacing equipment that still works. Morson believes pool equipment will become increasingly decentralized, with more intelligence built directly into individual components. As those capabilities expand, the range of pools that can operate without a traditional automation panel may grow considerably. Centralized systems will continue serving complex projects, but OmniX opens another route to automation for a much broader range of residential pools.

Read the entire article...


The Pool Pro’s Sidekick in Algae Prevention:

ROBOTIC CLEANERS

W

BY: SUSIE CUEBAS | PHOTO CREDIT: MAYTRONICS

hen algae appears in a swimming pool, the first response is often to add chlorine. But effective algae prevention requires more than chemical treatment. Circulation, filtration and consistent physical cleaning all play important roles in keeping pool surfaces free of growth. Dr. Adva Zach-Maor, Vice President of Research and Development at Maytronics, believes pool professionals should approach recurring algae problems with a diagnostic mindset. “You almost have to approach it as a detective,” Zach-Maor said. “Sometimes we see surprises in those pools, but most of the time it makes sense if you look at what really causes algae blooms to occur.”

54 POOL MAGAZINE - VOL 6, ISSUE 3

Warm water, sunlight, accumulated debris and inadequate circulation can create favorable conditions for algae. Even after chemical treatment kills the organisms, the remaining material must be physically removed. “The biggest mistake is to think that chemistry will solve everything,” Zach-Maor said. Modern swimming pools present additional cleaning challenges. Benches, tanning ledges, steps and shallow-water features create areas where circulation may be limited and debris can accumulate. “We are seeing more features in the pool such as benches, shelves, and ledges,” Zach-Maor said. “The issue with many of these styles of elements in the pool is that they create shallow areas with no flow in them,

and are exactly the types of areas where debris tends to accumulate and allow algae to proliferate.” These conditions make regular brushing particularly important. Even after chemical treatment kills algae, the remaining material must be dislodged and removed before it contributes to another bloom. Robotic cleaners can automate much of that repetitive work, scrubbing submerged surfaces and collecting debris between service visits. Commercial facilities have long used robotics to help manage the labor involved in cleaning large pools. The same approach is increasingly relevant to residential pools, where elaborate designs can make thorough manual cleaning more demanding.


The Perfect Sidekick

Traction Is Part of Coverage

For Sacramento pool professional Kelli Clancy, robotic cleaners became a way to expand her service business without increasing labor at the same rate.

As pool designs become more elaborate, a robotic cleaner’s ability to maintain contact with submerged surfaces becomes increasingly important. Sophisticated navigation means little if a machine slips on walls or cannot reach shallow ledges.

“Customers fell in love with my chem-only service,” Clancy said. “They’re brushing and skimming their own pools, and I’d drop a robotic pool cleaner in each one. For those customers, I’d only stop by every week or two to take readings and top off chemicals as needed.” Her approach illustrates how robotics can support residential maintenance, handling routine cleaning between visits while pool professionals concentrate on water chemistry, equipment inspections and identifying problems that automation cannot diagnose.

LAYLO

LOUNGER

“If the robot can climb it easily, that means that the pool is being taken care of,” Zach-Maor said. “If the robot is slipping on the wall, we know that the pool is not being taken care of.” Biofilm can reduce traction, although surface finishes, pool geometry and equipment condition also affect climbing performance. These challenges have influenced Maytronics’ Dolphin EON 100 and EON 120 residential platform, which emphasizes navigation, brushing

and consistent coverage across increasingly complex pool surfaces.

What Robots Cannot Replace Robotic cleaners are not substitutes for primary circulation and filtration. “You would not replace your peripheral equipment with a robot, meaning you wouldn’t replace your pump or your filter with a robot,” Zach-Maor said. Robotics can improve cleaning consistency and reduce repetitive labor, but effective algae prevention still depends on balanced chemistry, dependable filtration and thorough physical cleaning.

Read the entire article.

Water Depth Product Configurator Can be configured for up to 22” water depth and full leg rest submersion.


How Jobber is Helping Pool Pros Build Smarter,

MORE PROFITABLE POOL COMPANIES

P

BY JOE TRUSTY

ool service companies rarely grow all at once. A manageable weekly route becomes a larger customer base, followed by additional technicians, trucks, repair work and office staff. Eventually, the owner is no longer just managing pools but an entire organization. That was the progression for Scott Reynolds, owner of Purpose Pools in Las Vegas, where Jobber has become an important part of the company’s operating infrastructure.

Software Becoming Essential Jobber recently surpassed 100,000 paid customers. Moly Milosovic, the company’s Head of Community, says attitudes toward business software have changed considerably among pool professionals. “I’ve been going to trade shows

for years, including a lot of pool industry shows, and back then the rebuttal I always heard was, ‘I want to learn more, but I don’t think I need it yet,’” Milosovic said. “I don’t hear that anymore.” Reynolds began evaluating field-service platforms in 2022. Having previously worked with enterprise software, he wanted comprehensive functionality without unnecessary complexity. “I was looking for a really robust platform, and we finally landed on Jobber,” Reynolds said. “It was super straightforward and easy to use.” Purpose Pools has since expanded beyond weekly cleaning into a larger service and repair operation, with employees working across sales, administration and operations. “When we first started out, we were just doing weekly cleanings,”

Reynolds said. “Now we push about 100 customers a week through the platform between service calls, cleanings and repairs.” Centralizing scheduling, customer communication, estimates and invoicing has helped the company avoid missed follow-ups and administrative oversights. Reynolds also credits Jobber’s continued support as the business has grown. The operational improvements extend to repair sales. Customers can respond to estimates and communicate through Jobber’s Client Hub on their own schedules, helping Purpose Pools move from initial inquiry to completed work more quickly. “Our entire sales cycle is less than 40 hours,” Reynolds said. “From the time someone submits a request or makes a phone call, we can be completing the repair.”


Connecting Advertising to Revenue As Purpose Pools grew, Reynolds began looking beyond operational efficiency to understand which marketing investments were actually producing revenue. “We went from, ‘Let’s just spend. The top line looks really good,’ to asking how we could become more efficient,” Reynolds said. Advertising platforms can report clicks, calls and form submissions, but those metrics don’t necessarily reveal whether a lead becomes a paying customer. Working with digital agency PoolMarketing. com, Purpose Pools developed a custom returnon-ad-spend (ROAS) application that connects advertising performance with customer, sales and revenue information through Jobber’s API. Connecting both platforms enables the custom dashboard to track leads through the sales process, helping Reynolds identify which advertising channels generate completed jobs and revenue. “Now I’m able to tell when a lead hit the system, what stage it’s in and what the response was,” Reynolds said. “That allows us to make more efficient decisions.” The distinction matters when comparing marketing channels. A source generating inexpensive leads may produce little actual business, while a more expensive channel could consistently deliver valuable repair work or recurring service accounts. Reynolds now uses that information to reallocate advertising dollars toward channels producing measurable results rather than simply pursuing more leads. “As you grow, even being able to save a couple of percentage points on ad spend and reallocate that money somewhere else is a really big deal,” Reynolds said. Milosovic sees growing demand for precisely this type of visibility among contractors using Jobber. “That dashboard looks amazing,” she said. “I would love to see a dashboard like that in Jobber. We’re investing in helping customers understand their numbers better so they can make those kinds of high-growth decisions.”

For Reynolds, better marketing attribution is part of a larger change in how he evaluates the business. Increasing revenue means little if the cost of delivering that work rises just as quickly. “I think when most pool companies start out, we generally chase that vanity top line of, ‘Hey, I’m doing X amount of revenue,’ but we’re not really understanding the profit margins,” Reynolds said. Purpose Pools has responded by examining job costs more closely and establishing a pricing structure that accounts for the expense of performing different types of work. Combining that discipline with operational and marketing data gives the company a clearer picture of which activities contribute to profitable growth. “We need to understand our costs,” Reynolds said. “We’ve created a tiered cost ladder so we know what a job costs and what markup needs to go with it. That helps make sure we’re hitting our bottom-line numbers at the end of the week, quarter or year.”

Turning Data Into Business Intelligence Jobber’s growing customer base has generated substantial operational data. The company says its customers have completed nearly 90 million jobs representing more than $100 billion in services. For pool businesses combining recurring maintenance, repairs and equipment installations, that information can help owners identify opportunities and make more informed decisions. Milosovic said the response to Jobber’s marketing suite demonstrates contractors’ increasing appetite for reporting that goes beyond everyday scheduling and invoicing. “We have this exciting opportunity because you’re already doing your work in Jobber and all of those numbers are in there,” she said. “The question becomes: How do we surface that information so you can get advice that helps you make more money?” For Reynolds, connecting Jobber’s operational records with marketing attribution has already made that information actionable, helping Purpose Pools manage its expanding workload while keeping profitability at the center of its growth strategy.

Read the entire article. POOL MAGAZINE - VOL 6, ISSUE 3 57


Hidden Hazards: Wildlife Risks

BY LAUREN BROOM

POOL TECHS FACE ON THE JOB

P

Pool service professionals spend much of their workday outdoors, where hidden hazards can lurk in equipment pads, pump rooms, landscaping and storage sheds. Spiders, snakes, stinging insects and other wildlife can turn an ordinary service call into a medical emergency. Technicians routinely open equipment enclosures and reach into spaces where animals may remain hidden until disturbed. Recognizing those risks before beginning work is an important part of workplace safety.

Hidden in Plain Sight Black widow spiders frequently shelter in dark, undisturbed locations such as timer boxes and equipment enclosures. Brown

recluse spiders present additional risks in regions where they are established. Wasps, yellowjackets and hornets may build nests inside heaters or beneath equipment covers. Scorpions, fire ants and venomous caterpillars can also pose hazards around equipment pads and landscaping. In 2019, Florida pool technician Angelica Felix encountered a venomous puss caterpillar camouflaged among acorns on a pool deck. Its spines caused intense pain and swelling, demonstrating why technicians must pay attention to where they place their hands and knees.

Never Reach Blindly Snakes may shelter beneath

58 POOL MAGAZINE - VOL 6, ISSUE 3

equipment, inside valve boxes or under pool covers. In January 2025, an Arizona man nearly lost his hand after a rattlesnake bit him while he was adjusting a backyard water-feature valve. He had shaken the valve box beforehand, but the snake never rattled or revealed itself. Technicians should use flashlights to inspect enclosed spaces, wear appropriate protective equipment and use tools rather than their hands to move debris. Never reach into an area that cannot be clearly inspected. OSHA’s General Duty Clause requires employers to address recognized serious workplace hazards. Where wildlife presents a foreseeable danger, training and safe work practices are essential.


More Than Venomous Wildlife Mosquitoes and ticks can transmit serious diseases, while rodents may contaminate equipment areas or damage electrical wiring. In Florida and other southern states, technicians may also encounter alligators in swimming pools or nearby waterways. Even familiar domestic animals can present serious risks. In January 2025, a California pool technician was attacked by a customer’s dog during a routine service visit. She spent nine days hospitalized, underwent multiple surgeries and was left permanently disfigured. Property owners should secure pets before technicians arrive. If an aggressive animal, active insect nest or venomous snake is encountered, technicians should stop work, retreat to a safe distance and notify their supervisor and the property owner.

When an Encounter Becomes an Emergency A suspected venomous snakebite requires immediate emergency medical attention. Do not attempt to capture the snake, apply a tourniquet, cut the wound or remove venom. Call 911 for difficulty breathing, facial or throat swelling, fainting or other signs of a severe reaction following a bite or sting. Employers should provide training in hazard recognition, appropriate protective equipment, emergency response and incident reporting. Technicians should also have clear authority to suspend service when conditions are unsafe. A few seconds spent inspecting an equipment pad, checking the surrounding ground or carefully opening an enclosure can prevent a serious injury. For pool professionals entering unfamiliar backyards every day, looking before reaching should become second nature. Companies should reinforce these precautions through regular safety training and encourage technicians to report hazards when they encounter them.

Read the entire article... POOL MAGAZINE - VOL 6, ISSUE 3 59


Extending The Season WITH A RADIANT HEATED POOL DECK

R

BY BROOKE ROBERTS | PHOTO CREDIT: TRUE NORTH MECHANICAL

adiant-heated pool decks have traditionally been associated with luxury homes and commercial properties. In colder climates, however, they offer a practical advantage: keeping outdoor living spaces accessible when snow and ice would otherwise make them unusable. For one homeowner outside Ottawa, Ontario, that meant creating a backyard retreat where family and friends could gather for an outdoor New Year’s Eve pool party, despite temperatures that routinely fall well below freezing. Bringing that vision to life fell to James Armstrong and Joey Zdrilich of True North Mechanical, who have more than 30 years of combined industry experience. Ottawa’s harsh winters meant the system had to keep outdoor areas accessible through prolonged freezing temperatures while protecting the pool’s mechanical

components.

A Four-Season Backyard Retreat The project centered on a luxury clubhouse featuring a heated swimming pool and hot tub, wood stove, full kitchen, wine cellar, gymnasium, three-car garage, guest bedroom and generous entertainment spaces. The homeowner wanted the property to function as a yearround gathering place. That required more than heating the pool itself. Guests needed safe access between the clubhouse, swimming pool and surrounding amenities, even during Ottawa’s snowy winters. True North Mechanical designed a multi-zone hydronic heating and snowmelt system to keep the outdoor deck and walkways clear of snow and ice. Radiant heating beneath the hardscape helps maintain accessible walking

60 POOL MAGAZINE - VOL 6, ISSUE 3

surfaces throughout the winter, extending the usefulness of the entire outdoor living area. The project also presented an unusual engineering challenge. The automatic pool cover operates along a track that could freeze in sub-zero temperatures, potentially preventing the cover from opening or closing. To address that problem, the team incorporated radiant heating directly into the cover’s track system, using Uponor heattransfer panels and flexible PEX-a piping. With the installation nearing completion, the homeowners are preparing to enjoy their new retreat before hosting the New Year’s Eve celebration that inspired the project. Their ambitious vision demonstrates how thoughtfully engineered radiant heating can transform a seasonal backyard into a gathering place designed for all four seasons.


Keeping the Cover Operational One of True North Mechanical’s most important challenges was protecting the automatic pool cover from freezing. A frozen track could leave the cover inoperable during the coldest months of the year.

surrounding walkways accessible during Ottawa’s long winters. Together, these systems address both the mechanical challenges of operating a pool in freezing temperatures and the safety concerns associated with snowcovered outdoor surfaces.

“We lined the trough of the pool with Uponor Joist Trak™ heattransfer panels to radiate heat,” explains Armstrong. “Because, if this thing freezes and the pool cover can’t open or close, then we’re getting a phone call.”

Inside the Hydronic System The clubhouse itself also relies on radiant heating. True North Mechanical installed Uponor PEX-a piping beneath a four-inch concrete slab to provide consistent warmth throughout the building.

The six manifolds distribute heat throughout the clubhouse and outdoor areas, while garage air handlers provide additional warmth when the doors open.

“We’ve installed about 12,000 feet of Uponor PEX-a pipe for the snowmelt and the indoor radiant layout,” says Armstrong. “The manifolds are also Uponor. Inside, there are four of them, and outside, for the snowmelt, there are two. We also have hydronic air handlers in the garages for heat recovery when

The heated track works alongside the larger snowmelt system, which keeps the pool deck and

the doors open for a little bit. All the lines from the mechanical room to the hydraulic air handlers are Uponor, too.” The extensive installation integrates indoor heating, outdoor snowmelt and protection for the automatic pool cover into a comprehensive hydronic system. For pool builders working in colder regions, the project illustrates how radiant heating can extend beyond interior comfort to protect equipment and maintain access to outdoor amenities. Rather than closing the backyard when temperatures drop, homeowners can continue enjoying their investment throughout the winter.

Read the entire article.


Sand Pearl Brings a Softer Approach TO LUXURY GLASS POOL TILE

L

uxury pool design increasingly favors materials that create visual interest without overwhelming the surrounding architecture. With its new Sand Pearl Series, AquaBlu Mosaics is exploring that approach through monochromatic glass tile that uses changing light, rather than contrasting colors, to reveal its patterns. For Frank Vitori, AquaBlu’s cofounder and the collection’s designer, the idea was to reinterpret familiar checkerboards, stripes and offset stripes through the relationship between matte and iridescent glass. “The concept behind Sand Pearl was to take patterns we’re seeing throughout contemporary design—checkerboards, stripes

and offset stripes—and reinterpret them through finish and light,” Vitori explained. “Instead of using contrasting colors to define the pattern, we’re using the same color in matte and iridescent glass. As the light changes, the pattern reveals itself.”

Sand Pearl: Reinventing Pattern Through Light

BY: ALISE EVERTON PHOTOS: AQUABLU MOSAICS conditions and considerably more expressive under another. “Luxury doesn’t always need to announce itself,” Vitori said. “Sometimes the details you notice as you move through a space— the way a surface changes in the light or the way water completely transforms the material.”

The effect can be subtle at first. As sunlight moves across an installation or water flows over the surface, iridescent sections reflect light differently from their matte counterparts, bringing the pattern into sharper focus.

Sand Pearl offers six coastalinspired colorways: Marelle, Caspia, Brisa, Calista, Marea and Aurelia. The palette ranges from pearlescent whites and warm sand tones to tropical aqua, sea-glass greens and deeper coastal blues and grays.

In a swimming pool, changing water depth, ripples and viewing angles add further dimension. The result is a surface that can appear restrained under one set of

Rather than relying on dramatic color combinations, each colorway uses finish and reflection to create visual movement while maintaining a cohesive appearance.

62 POOL MAGAZINE - VOL 6, ISSUE 3


Sand Pearl extends beyond individual decorative mosaics. Its checkerboard, stripe and offset stripe patterns are complemented by stacked and staggered field tiles, allowing designers to carry the same color and material across an entire project. A raised spa might feature a checkerboard mosaic, while the surrounding pool uses coordinating field tile. Stripes can introduce direction along a waterline or architectural wall, and offset stripes provide a more dynamic treatment for water features. AquaBlu has also paired the collection with curated Starlike PRO grout selections. With small-format glass mosaics, grout becomes a visible part of the finished composition. Coordinating it with the tile helps preserve the monochromatic appearance rather than introducing an unintended contrasting grid. Although glass mosaics are frequently associated with swimming pool waterlines, Sand Pearl was developed for broader architectural applications. The collection can extend across spas, vanishing edges, spillways, feature walls, kitchens and backsplashes. Its coordinating formats allow designers to continue a consistent material palette between indoor and outdoor living spaces while varying the prominence of the pattern. That flexibility is particularly relevant to contemporary homes where expansive glass doors, outdoor kitchens and integrated entertaining areas increasingly connect interior architecture with the backyard. In aquatic environments, the collection’s interaction with moving water creates additional possibilities. On an infinity edge, the reflective glass can visually connect the pool with a distant horizon. On raised spas and spillways, flowing water continuously changes which portions of the pattern catch the light. Sand Pearl is manufactured in the United States and TCNA-tested for performance. As with any glass mosaic installation, proper substrate preparation, compatible setting materials, appropriate grout and adherence to manufacturer installation requirements remain essential. For builders and designers, the collection provides a coordinated approach to specifying glass across multiple surfaces without introducing competing colors or materials.

Sand Pearl reflects a broader movement toward quieter, more deliberate material choices in residential design. Rather than relying on elaborate ornamentation, the collection creates visual interest through subtle differences in finish and the changing conditions of its environment. Its patterns can behave differently throughout the day. A checkerboard may appear nearly uniform in subdued light before sunlight reveals its alternating surfaces. An iridescent stripe can become more pronounced as the viewing angle changes, while moving water continually alters the appearance of an offset pattern. That versatility allows designers to adjust the visual intensity of an installation without changing its color palette. Decorative mosaics can establish focal points, while coordinating field tiles provide a quieter treatment across larger surfaces. The approach is particularly well suited to pools where architecture, landscaping and surrounding views already provide a strong visual statement. By bringing color, finish, pattern, field tile and grout together in a coordinated collection, AquaBlu gives designers greater control over how glass interacts with the broader environment. For Vitori, Sand Pearl represents an opportunity to let light and water become active elements of the design, creating a finish that reveals more of its character as people move through the space.

Read the entire article. POOL MAGAZINE - VOL 6, ISSUE 3

63


What’s Hot & Trending: FIRE PITS & FIRE TABLES

F

ire features are now an integral part of outdoor living design, specified alongside pools, hardscapes and furniture. Today’s options range from compact fire pits to oversized tables designed for entertaining.

Chuck Nitschke, National Director of Sales for The Outdoor Plus, says builders are selecting fire features that complement a project’s architecture. “When a builder comes to us with a sleek, highend contemporary project with more of those sharp geometric landscaping designs, we’re looking for fire features that are going to reinforce those clean lines rather than disrupt them,” Nitschke said. The Del Mar, one of the company’s top-selling linear models, illustrates that approach. Measuring approximately 28 inches wide and 16 inches tall, its GFRC concrete construction complements contemporary pool designs. Its height positions the flame to provide comfortable warmth for people seated around it rather than concentrating heat at their shins or upper bodies.

64 POOL MAGAZINE - VOL 6, ISSUE 3

For designers who prefer metal, the Coronado offers similar linear proportions with numerous finishes, including powder-coated steel, 304 or marine-grade 316 stainless steel, smooth or hammered copper and Corten steel. Its clean profile complements contemporary pool decks. At just 16 inches wide and 72 inches long, the Carmen delivers an extended line of fire without occupying excessive deck space. A lower version connects to natural gas, while a 24-inch-tall model conceals a propane tank, making it practical for finished patios where installing a gas line would be difficult. Round fire pits remain popular for gathering spaces, and the Unity is among The Outdoor Plus’ strongest sellers. Offered in 48-, 60- and 72-inch diameters, it can accommodate intimate seating arrangements or larger conversation areas. Different heights and materials allow designers to specify permanent gas connections or concealed propane, depending on the installation.

BY ALISE EVERTON PHOTOS: THE OUTDOOR PLUS


The Sedona Wide Ledge combines the appeal of a traditional round fire pit with usable surface space. Its 48-inch model has an approximately 28-inch burner opening, leaving a generous perimeter for drinks and other items. It offers homeowners a central gathering place without sacrificing the convenience of a table, making it particularly useful in outdoor conversation areas where furniture space is limited.

“The Newport is a giant,” Nitschke said. “It is a beast.” Ranging from 72 to 144 inches long, approximately four feet wide and 30 inches tall, it accommodates larger gatherings around a substantial central flame.

Combining a dining table with a central fire feature, the Alameda offers tabletop options in powdercoated metal, composite decking and GFRC, allowing designers to coordinate it with surrounding outdoor finishes. With its wood-grain concrete finish, the Catalina brings the look of timber to outdoor spaces. Available in ebony, ivory and traditional oak, it also conceals a propane tank. “If you’re wanting a standout feature, something that when somebody comes into your backyard they haven’t seen before, that wood grain is a beautiful little piece to add back there,” Nitschke said.

Customization increasingly extends beyond a fire feature’s dimensions and finish. The Outdoor Plus offers several burner configurations to shape the flame, while integrated LED lighting adds another visual element. Rounding out what’s hot and trending, Nitschke points to integrated lighting. “Right now there’s big movement into fire pits that also incorporate not just fire, but also LED lights,” he said. Nitschke describes the Mesa as “a blend of sophistication with a touch of simplicity.” Standing approximately 24 inches tall, its tapered linear design pairs well with sectionals and outdoor couches. A concealed propane compartment makes it particularly practical for finished patios where installing a new gas line would require disturbing existing hardscape.

Read the entire article.


Your next competitive edge isn’t a tool.

It’s a Community. When you join PHTA, you’re not just joining an organization—you’re joining a vibrant network of professionals dedicated to elevating each other and the industry. Together, we connect, learn, lead, and thrive.

Get the Edge. Join PHTA today. Pool & Hot Tub Alliance 1650 King St., Suite 602 Alexandria, VA 22314

Strategic Partners:

703-838-0083 membership@phta.org PHTA.org


RADIANCE IN MOTION B E AU T Y

WELLNESS

CONNECTION

MORE THAN A POOL A B R I G H T E R YOU w w w. r i v e r f l o w p u m p s . c o m

|

design@riverflowpools.com


RESIDENTIAL

COMMERCIAL

HOSPITALITY

Spas Swimming Pools Acrylic-Walled Pools & Spas Energy-Efficient Portable Spas Swim Spas Cold Therapy Plunge Pools Tile-ready Pools & Spas Water Features Luxury Custom Indoor & Outdoor Bath Fixtures SPECIALIZING IN ELEVATED / ROOFTOP POOL & SPA INSTALLATIONS LIGHTWEIGHT & DURABLE

TAKING AQUATIC ENJOYMENT TO A HIGHER LEVEL SINCE 1996 1.800.951.spas (7727) 720.864.9115 fax 866.605.2358 diamondspas.com info@diamondspas.com

ROOFTOP / ELEVATED STAINLESS STEEL POOL WITH INTERIOR STAIRWAY, LED LIGHTING & ACRYLIC WALL PANEL AT FAR END

Photo courtesy of: Apiary Residences, managed by Greystar Builder: The Beck Group Photographer: Mark Woolcott Photography

Diamond Spas Pools

Custom Stainless Steel & Copper Aquatic Products


Turn static files into dynamic content formats.

Create a flipbook
Pool Magazine - Volume 6 - Issue 3 - Fall 2026 by Pool Magazine - Issuu