Catálogo_Opaque_INGLÊS

CATALOGUE

POLO OPAQUE Get to know the BOPP OPAQUE family

@polofilms

O PAQ U E

FA M I LY

TBP.HGS Opaque White BOPP Film Heat-sealable Surface treatment for printing and/or lamination

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 105° C on the untreated surface; Internal or external surface treatment; High gloss on both surfaces; Cavitated film with high opacity; Optimal performance in horizontal and vertical packing machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: sweets, chocolates, ice creams; Flexible packaging for non-foods: packaging for gifts and decorative applications in general; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.

If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability.

It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.

TBP.GFT Opaque White BOPP Film Heat-sealable Surface treatment for printing

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 105° C on the untreated surface; Internal or external surface treatment; High gloss and brightness on both surfaces; Cavitated film with high opacity; Optimal performance in flexographic printers and rotogravure printing.

MOST COMMON APPLICATIONS Flexible packaging for non-foods: bags for gifts and decorative applications in general.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.

If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability.

It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.

O PAQ U E

FA M I LY

TBP.PSL Opaque White BOPP Film.

Surface treatment for printing and stickering.

Pressure-Sensitive Labeling Application.

MAIN CHARACTERISTICS Corona surface treatment on the glossy surface and blaze treatment on the matte surface; A glossy surface, and a matte surface; High stiffness and low stretch; Cavitated film with high opacity; Optimal performance in flexographic printers, and in rotogravure, digital, UV and thermal transfer printing;

MOST COMMON APPLICATIONS Labels and self-adhesive tags (Pressure-Sensitive Labeling) Decorative applications in general.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.

If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability.

It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.

TBP.IML Transparent BOPP Film.

Heat-sealable.

Surface treatment for printing and/or lamination.

In Mold Label - IML Application.

MAIN CHARACTERISTICS Heat-sealable starting from 105° C on the untreated surface; Internal or external surface treatment; Excellent optical properties (gloss and transparency).

MOST COMMON APPLICATIONS In Mold Label - IML Labels.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.

If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability.

It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.

O PAQ U E

FA M I LY

TBP.RLB Opaque White BOPP Film.

Heat-sealable.

Surface treatment for printing and/or lamination.

MAIN CHARACTERISTICS Corona surface treatment on one side; High gloss on both surfaces; High stiffness and low stretch; Cavitated film with high opacity; Excellent performance in very-high-speed labeling machines.

MOST COMMON APPLICATIONS Roll-label type labels; Decorative applications in general.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.

If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability.

It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.

TWO.PSL Opaque White BOPP Film.

Surface treatment.

Pressure-Sensitive Labeling Application.

MAIN CHARACTERISTICS Heat-sealable starting from 112° C on the glossy surface; Internal or external surface treatment; A high-gloss white surface, and a matte surface; High stiffness and low stretch; Cavitated film with high opacity; Optimal performance in flexographic printers, and in rotogravure, digital, ultraviolet and thermal transfer printing.

MOST COMMON APPLICATIONS Self-adhesive labels and tags (Pressure-Sensitive Labeling) ; Magazine Labels (WAL Cut & Stack); Decorative applications in general.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.

If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability.

It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.

O PAQ U E

FA M I LY

TBB Opaque White Base BOPP Film for metallization Heat-sealable Surface treatment for printing and/or lamination

MAIN CHARACTERISTICS Heat-sealable starting from 105° C on the untreated surface; Internal or external surface treatment; Excellent optical properties (gloss and opacity).

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, chocolates, cereal bars, labels, and decorative applications in general; Flexible packaging for non-foods: monolayer or laminated options.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.

If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability.

It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.

TBP.CSL Opaque White BOPP Film Surface treatment for printing and/or lamination Cold Seal Application

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 105° C on the untreated surface; Internal or external surface treatment; Both surfaces are glossy; Cavitated film with high opacity; Optimal performance in flexographic printers and rotogravure printing, opposite surface suitable for stickering and Cold Seal applications.

MOST COMMON APPLICATIONS Flexible packaging for foods: chocolates, candies and biscuits; Flow Pack packaging for individual portions.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.

If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability.

It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.

W W W. P O LO F I L M S .CO M . B R

@polofilms