Installation Instructions
Plasson Sensor Adaptor - Clamping by Bolt
1
2
Clamping Tool
110-125mm 140-200mm 225-280mm 315-450mm 500-630mm 710-1200mm
Attach the relevant adaptor plate to the clamping tool according to main pipe diameter used. Place the clamping tool over the saddle.
Peel and clean the pipe, then drill a 13.5mm hole at the center with the drill provided.
3
Adaptor Plate
4
Insert the bolt through the saddle outlet into the hole drilled in the pipe and tighten firmly by using an 18mm wrench.
Weld the fitting. After the cooling time, remove the bolt and the clamping tool.
w w w. p l a s s o n . co m . a u