2014 Swanson School of Engineering Statistical Summary

Statistical Summary 2014 Academic Year engineering.pitt.edu/statistics

Swanson School of Engineering Statistical Summary For the 2014 Academic Year

University of Pittsburgh

Contents: University Overview ...................................................................... 1 History ............................................................................................ 3 Organizational Chart .................................................................... 6 Departments and Degree-Granting Programs ......................... 13 Special Academic Programs ....................................................... 16 Research Facilities, Centers ........................................................ 27 and Laboratories Academic Record ......................................................................... 63 Student Awards and Honors ........................................... 63 Enrollment ....................................................................... 71 Co-op Companies ............................................................ 76 Student Placement/Employment ...................................... 79 Fees and Tuition.............................................................. 82 Degrees Conferred .......................................................... 83 Graduate Roster: 2013-2014 .......................................... 84 Faculty .......................................................................................... 92 Faculty Headcount .......................................................... 92 Faculty Profiles ............................................................... 93 Faculty Research Interests ............................................ 151 Research Expenditures .................................................. 167 Publications .................................................................. 168 Awards and Honors ...................................................... 233 Distinguished Lectureships ........................................... 235 Alumni Relations ...................................................................... 236 2014 Distinguished Alumni .......................................... 236 Development: ................................................................ 242 Endowment Support ........................................ 242 Swanson School of Engineering Board of Visitors ................. 243 Visiting Committee and Advisory Boards ............................... 244 School Directory ........................................................................ 249

The University of Pittsburgh The University of Pittsburgh of the Pennsylvania State System of Higher Education is a nonsectarian, coeducational, state-relate, public research university. It is internationally respected as a center for learning and research. The University was founded in a log cabin near the confluence of Pittsburgh's three rivers in 1787 as a small private school named the Pittsburgh Academy, was renamed in 1819 as the Western University of Pennsylvania, and then was renamed again in 1908 as the University of Pittsburgh. The University became state related in 1966.

Since its founding 227 years ago, the University of Pittsburgh has established itself as the most comprehensive educational complex in the region. It provides a wide range of academic programs and services for the Pittsburgh metropolitan area’s population of 2.4 million. With an enrollment of nearly 35,000 students, the University is one of the largest institutions of higher education in Pennsylvania. Supporting the needs and interests of the University are more than 13,000 faculty members, research associates, and staff members. University-related spending is $1.74 billion annually, making an important economic impact on the local economy.

The University comprises five campuses. The 132-acre Pittsburgh campus is located in Oakland, which is the city of Pittsburgh's cultural and medical center. The University’s four regional campuses are located in Western Pennsylvania, in Johnstown, Greensburg, Titusville, and Bradford. More than 100 academic, research, and administrative buildings, and residence halls are located on the Pittsburgh Campus. Pitt’s University Library System is the 22nd-largest academic library system in North America. In fiscal year 2012, the University’s 25 libraries and collections surpassed 6.6 million volumes.

The Pittsburgh campus comprises 16 undergraduate, graduate, and professional schools: the Kenneth P. Dietrich School of Arts and Sciences; the College of General Studies; the Joseph M. Katz Graduate School of Business and College of Business Administration; the Schools of Education, Law, Social Work, and Information Sciences, and the Swanson School of Engineering; the Graduate School of Public and International Affairs; and the University’s six schools of the health sciences -- Graduate School of Public Health and the Schools of Dental Medicine, Health and Rehabilitation Sciences, Medicine, Nursing, and Pharmacy. Overall, the University offers more than 450 distinct degree programs augmented by numerous dual, joint, and cooperative degree program options. In fiscal year 2012, the University conferred 8,949 degrees. (In 2014, it was 9,049.)

The University of Pittsburgh is accredited by the Middle States Association of Colleges and Schools as well as by various specialized accrediting agencies. It is a member of the Association of American Universities, which is an organization a consortium of 62 leading doctorate-granting research institutions in the United States and Canada.

The University of Pittsburgh Medical Center (UPMC), affiliated with the University of Pittsburgh’s schools of the health sciences, is the premier health care system in Western Pennsylvania. Composed of teaching hospitals and research centers, UPMC operates more than 20 academic, community, and specialty hospitals and 400 outpatient sites.

Numerous athletic events, organizations, and cultural happenings energize student life at the University throughout the year. There are 19 men’s and women’s varsity teams at the University.

1

In 2013, the University joined the Atlantic Coast Conference, a national leader in a broad range of intercollegiate sports.

The University continues to make great strides in offering high-quality education, research, and public service locally, nationally, and internationally. Admission to Pitt has become more selective in recent years with 52 percent of first-year students graduating in the top 10 percent of their high school classes, as compared to 22 percent in 1996. The University has moved into the top 10 American higher education institutions in terms of federal research and development funding, as reported by the National Science Foundation. Pitt also ranks among the top five universities nationally in annual research support awarded by the National Institutes of Health.

2

The Swanson School of Engineering Since 1846, the University of Pittsburgh’s Swanson School of Engineering has developed innovative processes and designs that have shaped our state, our country, and our world. Swanson School faculty and students are on the forefront of developing solutions to create a better future and continue its founding commitment to industrial, electrical, and mining engineering, the fields the world relies on for its energy and raw materials. The Swanson School also focuses on our health, our planet, and the ingenuity that keeps us competitive with recognized programs in bioengineering, sustainability, and energy. Nanotechnology, manufacturing, and product innovation are also critical strategic initiatives.

The Swanson School of Engineering prepares graduates through actual experience to enter exciting careers in advanced research and industry. Students find their place in the workforce through our established co-op program and working partnerships with engineering’s top companies. Our faculty and staff represent countries around the world and are internationally recognized for providing excellent educational programs, for conducting cutting edge research, and for creating the partnerships that shape the industry. International experience in engineering is a core component of the academic curriculum, with study abroad programs offered in South America, Europe, and Asia.

The mission of the Swanson School of Engineering is to produce highly-qualified engineers and useful creative research and technology through academic excellence. The faculty and staff at the Swanson School of Engineering are recognized for providing excellent educational programs, for conducting leading edge research, and for creating innovative industrial partnerships.

History The University of Pittsburgh’s Swanson School of Engineering has a long and distinguished history. The earliest engineering courses at Pitt were established in response to the growth of Western Pennsylvania during the early industrial revolution, with the first degrees of “Engineer” awarded in 1846, thereby establishing Pitt as the nation’s sixth earliest engineering program.

The involvement of Pittsburgh industry in the years surrounding the Civil War transformed a regional industrial base into one with strong international significance, and the University responded to the need. In 1868, specialized degrees in Civil and Mechanical Engineering were initiated, with Mining Engineering following in 1869, and Electrical Engineering in 1890. In 1909, the Department of Metallurgical Engineering was established, followed by the Department of Chemical Engineering and the world’s first Department of Petroleum Engineering in 1910. Also in that year, the School created one of the nation’s first undergraduate Cooperative Education Programs. Pitt Engineering’s tradition of innovative programming resulted in the establishment of one of the nation’s first Industrial Engineering Departments in 1921. The most recent department, Bioengineering, was established in 1998.

Among the many prominent individuals associated with the early history of the School were Samuel Pierpont Langley and Reginald A. Fessenden. Langley, who is credited with developing the engineering science of aerodynamics during his 24 years at Pitt, designed the first heavier-than-air craft capable of flight and greatly influenced the Wright Brothers. Fessenden, brought to Pittsburgh by George Westinghouse as the first electrical engineering department head, obtained more than 300 patents. Through his pioneering studies with voice transmission, he is now credited with being the “Father of Radio” and made the first broadcast of the human voice in 1906.

Throughout the 20th century the School of Engineering continued its growth, and moved to a new Engineering Hall in the 1950s. This was also accompanied by the institution of new programs such as international education to strengthen the academic experience of engineering students. As the student population continued to grow, the University developed plans for a larger facility and commissioned the construction of Benedum Hall of Engineering, in honor of a grant from the Benedum Foundation. Benedum Hall was completed in 1971. The 1990s saw the emergence of new centers of excellence which promoted cross-disciplinary infrastructure between departments, as

3

well as the launch of the new bioengineering program and the Center for Biotechnology and Bioengineering at the Pittsburgh Technology Center, on the former site of the Jones & Laughlin Steel Mill Complex in nearby Hazelwood.

Engineering 21st-Century Success In 2007, the School became the Swanson School of Engineering after a landmark event: John A. Swanson (PhD ’66), founder of ANSYS Inc., made the largest individual philanthropic commitment in the history of the University of Pittsburgh at that time. As a result of his remarkable generosity, the Board of Trustees presented a formal resolution on February 29, 2008 and announced the changing of the school’s name to the John A. Swanson School of Engineering. His gift, along with that of John C. “Jack” Mascaro (BSCE '66, MSCE '80), founder and president of Mascaro Construction Company, enabled a multi-year transformation of Benedum Hall into a building with more open labs and “smart” classroom space, enabling greater collaboration between faculty and students.

A new three-story annex that connects to Benedum Hall was completed in 2009 and is home to the Mascaro Center for Sustainable Innovation as well as labs, classrooms and the new Bevier Library. In 2012 the Swanson School received a $22 million grant from the Richard King Mellon Foundation - one of the largest private foundation grants in Pitt’s history. The gift will accelerate the research and education efforts of the Center for Energy, create new faculty positions and graduate fellowships, and establish a fund for spurring innovative research on a newly designated Energy Floor in Benedum Hall.

Later in 2012 the Swanson School exceeded its $180 million campaign goal and announced that over $200 million had been reached. The goal was part of the University of Pittsburgh’s comprehensive $2 billion campaign, which was also reached in 2012. The funds will enable the full transformation of the Swanson School of Engineering, both physically and academically, and establish it as one of the leading engineering programs in the world.

On April 14, 2014, to mark the tenth anniversary of the University of Pittsburgh’s Mascaro Center for Sustainable Innovation (MCSI) and to build upon the ongoing philanthropy of two of Pitt’s most generous donors and engineering alumni, Pitt announced a new $37.5 million funding initiative comprising various endowments and current funds to support sustainability-related academics and research. Through the leadership of a new Sustainability Task Force established by the Office of the Provost, the University will extend sustainability initiatives throughout Pitt’s academic programs and research initiatives. This expanded commitment to sustainability was inspired by Mr. Jack Mascaro and Dr. John A. Swanson, both of whom contributed toward the new sustainability initiative.

New International Partnership, New Campus In 2013 the Swanson School led a University effort to create a joint institute with Sichuan University, one of China’s premier engineering schools. Pitt is one of only five U.S. universities to have entered into a large-scale partnership agreement with a university in China; the others are Carnegie Mellon University, Duke University, New York University, and the University of Michigan.

Sichuan University will initially invest nearly $40 million to support the construction and equipping of a new 300,000-square-foot building to house the Sichuan University – Pittsburgh Institute on its campus. With emphases on advanced sustainable manufacturing and educational innovation, the institute will initially offer three undergraduate degree programs: industrial engineering, mechanical engineering, and materials science and engineering. Students in the institute will be recruited from the United States, China, and possibly other countries, with the first class in fall 2015 expected to comprise 100 students. Within seven years, enrollment is projected to grow to 1,600. Officials from the University of Pittsburgh and Sichuan University in China participated in a groundbreaking ceremony on July 2 at the Sichuan University campus in Chengdu to launch construction of the first building.

4

Students will spend the first two years of the program immersed in the Pitt curriculum in China with the option of transferring to Pitt’s main campus during their third year in the program. Students who transfer to Pitt directly after their sophomore year will earn a bachelor’s degree from both Sichuan University and Pitt, and all students will receive an institute certificate upon completion of their studies. Qualified students will also be able to continue their graduate studies at Pitt.

Deans of Engineering Daniel Carhart

1882 - 1908

Frederick L. Bishop

1910 – 1927

Elmer A. Holbrook

1927 – 1950

G. Raymond Fitterer

1951 – 1963

Harold E. Hoelscher

1965 – 1973

Max L. Williams

1973 – 1985

Charles A. Sorber

1986 – 1993

H.K. Chang

1994 – 1996

Gerald D. Holder

1996 –

5

6

CHERYL PAUL

Director of Engineering Student Services

KRISTINE LALLEY

Director of International Engineering Initiatives

MAUREEN BARCIC

Director of Cooperative Education

ALAINE ALLEN

Director of Investing Now and EXCEL

DANIEL BUDNY

Associate Professor Academic Director of Freshman Engineering Program

BRIAN VIDIC

Director of Information Technology

Vacant

Executive Director of Center for Energy

SCHOHN SHANNON

ERIC BECKMAN

RAMA BAZAZ

PAUL KOVACH

Director of Marketing and Communications

MATTHEW W EINSTEIN*

Senior Executive Director of Development and Alumni Relations

*Reports Directly to the Office of Institutional Advancement

Degrees Granted (School Year Ending April 2014): BS: 538 MS: 241 PhD: 69

Graduate Enrollment: 988

BRIAN GLEESON

Administrative Coordinator NANCY DONALDSO N

Mechanical Engineering and Materials Science Harry S. Tack Chair Professor and Chair

Director of Administration

Undergraduate Enrollment: 2798

GENA KOVALCIK

Co-Director of Mascaro Center for Sustainable Innovation

BOPAYA BIDANDA

WILLIAM STANCHINA

SYLVANUS WOSU

Assistant Dean

RADISAV VIDIC

Indust rial Engineering Ernest E. Roth Professor and Chair

CATHY VARGO

Assistant to the Dean

Electri cal and Computer Engineering Professor and Chai r

Co-Director of Mascaro Center for Sustainable Innovation

STEVEN LITTLE

SANJEEV SHRO FF

Civil and Env ironmental Engineering Wil liam Kepler Whit eford Professor and Chai r

DAVID VORP

Associate Professor Associate Dean for Diversity

Chemical and Petroleum Engineering CNG Faculty Fellow Associate Professor and Chair

LARRY SHUMAN

MINKING CHYU

William Kepler Whiteford Professor Associate Dean for Research

Bioengineering Distinguished Professor and Gerald McGinnis Chair

Distinguished Service Professor Senior Associate Dean for Academic Affairs

Leighton E. and Mary N. Orr Chair Professor Associate Dean of International Affairs

GER ALD HOLDER

U.S. Steel Dean of Engineering

SWANSON SCHOOL OF ENGINEERING

7

AARON BATISTA

STEVEN ABRAMOWITCH

XINYAN TRACY CUI

Associate Professor

RICHARD DEBSKI

Associate Professor

PARTHA ROY

RAKIE CHAM

Associate Professor

LANCE DAVIDSON

William Kepler Whiteford Faculty Fellow Associate Professor

TAMER IBRAHIM

Graduate Academic Administrator

NICHOLAS MANCE

DANIEL GEALEY

VACANT

Administrative Coordinator

LINDSAY RO DZWICZ

Coulter Program Administrator

GLENN PETERSO N

DOUGLAS WEBER

Financial Administrator

Department Administrator

GELSY TORRES-OVIEDO

Assistant Professor

Associate Professor

SPANDAN MAITI

Assistant Professor

Assistant Professor

Assistant Professor

Associate Professor Bicentennial Alumni Faculty Fellow

Associate Professor

PATRICK LOUGHLIN

PRASHANT KUMTA

Professor

TIN-KAN HUNG

William Kepler Whiteford Professor

HARVEY BOROVETZ

Edward R. Weidlein Chair Professor

Distinguished Professor Robert L. Hardesty Professor

Professor

ZACHARY STRICKLER

Personnel Coordinator

KURT BESCHOR NER

YADONG WANG

William Kepler Whiteford Professor

ALICIA KEMP

Undergraduate Academic Administrator

ALAN HIRSCHMAN

Research Assistant Professor JUSTIN WEINBAUM

PRATAP KHANWILKAR

SAVIO WOO

Distinguished University Professor

Professor Director of Coulter Program

Degrees Granted (School Year Ending April 2014): BS: 60 MS: 9 PhD: 19

Graduate Enrollment: 178

Undergraduate Enrollment: 288

DAVID VORP

Associate Dean for Research William Kepler Whiteford Professor

Professor Executive Director of CMI

GEO RGE STETTEN

Research Assistant Professor

JOHN PATZER, II

Associate Professor Director of Undergraduate Program

WILLIAM FEDERSPIEL

Director of Graduate Program

William Kepler Whiteford Professor

MARK REDFERN

Vice Provost for Research William Kepler Whiteford Professor

SANJEEV SHRO FF

Distinguished Professor and Gerald McGinnis Chair

BIOENGINEERING

SWANSON SCHOOL OF ENGINEERING

8 CHRISTOP HER WILMER

IPSITA BANERJEE

Assistant Professor JOHN KEITH

Assistant Professor GIANNIS MPOURMPAK IS

JULIE d’ITRI

Associate Professor William K epler Whiteford Faculty Fellow

DI GAO

Associate Professor

SACHIN VELANKAR

Unit Ops Lab Manager MATT DETZEL

Executive Assistant to the Chairman

ANGELA DILLON

LEI LI

Assistant Professor

CHERYL BODNAR

Assistant Professor

RITA LECCIA

ROBERT MANIET

Senior Research Technician

PATRICIA PARK

GÖTZ VESER

JUDITH YAN G

Nickolas A. DeCecco Professor

HEIDI PECK

Pittsburgh Coal Conference Organizer

ADRIAN STARKE

Administrator

Degrees Granted (School Year Ending April 2014): BS: 99 MS: 9 PhD: 5

Graduate Enrollment: 91

Undergraduate Enrollment: 437

ROBERT PARKER

Business Administrator

ROBERT TOPLAK

Assistant Chairman

Professor BADIE MORSI

GEO RGE KLINZING

ROBERT ENICK

Nickolas A. DeCecco Professor

JOSEPH MCCARTHY

Bayer Professor and Vice Chair for Research

Professor B.P. America Faculty Fellow

Wil liam Kepler Whiteford Professor and Vice Chair For Education

William Kepler Whiteford Professor

Academic Administrator

Assistant Professor

Assistant Professor

Associate Professor

J. KARL JO HNSON

ERIC BECKMAN

ANNA BALAZS

MOHAMMAD ATAAI

George M. Bevier Professor

Robert v. d. Luft Professor

Professor

Willam Kepler Whiteford Professor

STEVEN LITTLE

CNG Faculty Fellow Associate Professor and Chair

CHEMICAL AND PETROLEUM ENGINEERING

SWANSON SCHOOL OF ENGINEERING

9

Associate Professor DANIEL BUDNY

Associate Professor ANTHONY IANNACCHIONE

Associate Professor PIERVINCENZO RIZZO

Assoiciate Professor JULIE VANDENBOSSCHE

Associate Professor

MELISSA BILEC

Associate Professor

KENT HARRIES

Associate Professor

JEEN-SHANG LIN

Associate Professor

MORTEZA TORKAMANI

Administrator ERIN GOLEN

AMY KAPP

NA WEI

VIKAS KHANNA

QIANG YU

Assistant Professor

ANDREW BUNGER

Assistant Professor

Degrees Granted (School Year Ending April 2014): BS: 89 MS: 52 PhD: 15

Graduate Enrollment: 152

Undergraduate Enrollment: 263

Assistant Professor

JOHN BRIGHAM

Assistant Professor

Assistant Professor

KYLE BIBB Y

BRYANNA SNYDER

FRED TYLKA

CHARLES HAGER

Department Administrator

JORGE ABAD

Assistant Professor

Student Services Coordinator

Technology Lead

Senior Machinist

LEO NARD CASSON

Associate Professor Academic Coordinator

XU LIANG

Assistant Professor

Professor LUIS E. VALLEJO

Professor

RADISAV VIDIC

William Kepler Whiteford Professor and Chair

CIVIL AND ENVIRONMENTAL ENGINEERING

SWANSON SCHOOL OF ENGINEERING

10

Associate Professor

YIRAN CHEN

Associate Professor

GEO RGE KUSIC

Associate Professor

GUANGYONG LI

Associate Professor

KARTIK MOHANRAM

Associate Professor

MINHEE YUN

Associate Professor Paul E. Lego Faculty Fellow

PENG CHEN

Associate Professor

AMRO EL-JARO UDI

Associate Professor RK Mellon Facul ty Fellow

ALEXIS KW ASINSKI

Associate Professor William Kepler Whiteford Faculty Fellow

ZHI-HONG MAO

Associate Professor

JUN YANG

Professor

JESSICA DAWSON

Undergraduate Computer Engineering Administrator

HAI LI

Assistant Professor

MURAT AKCAKAYA

Assistant Professor

HONG KOO KIM

CAITLIN MATHIS

Department Administrator

ERVIN SEJDIC

Assistant Professor

THOMAS MCDERMOTT

Assistant Professor

STEVE JACOBS

Assistant Professor

STEVEN LEVITAN

John A. Jurenko Professor Director of Computer Engineeri ng Graduate Program

Professor

Professor

ANDREA VARELA

Undergraduate Electrical Engineering Administrator

SANDR A WEISBERG

Graduate Administrator

IRVIN JONES, JR.

ALEXANDER JONES

MAHMOUD EL NOKALI

Degrees Granted (School Year Ending April 2014): BS: 87 MS: 45 PhD: 10

Graduate Enrollment: 170

Undergraduate Enrollment: 415

Assistant Professor and Electrical Engineering Undergraduate Coordinator Associate Professor and Director of Computer Engineeri ng Undergraduate Program

GREGO RY REED

Associate Professor, Associate Chai r of Electrical Engineeri ng, and Graduate Coordinat or

CHING-CHUNG LI

WILLIAM STANCHINA

Professor and Chair

ELECTRICAL AND COMPUTER ENGINEERING

SWANSON SCHOOL OF ENGINEERING

11

Associate Professor BRYAN NORMAN

Associate Professor

LISA MAILLART

RAVI SHANKAR

Associate Professo r William K epler Whiteford Faculty Fellow

JOEL HAIGHT

Associate Professor

MARY BESTERFIELDSACRE

Associate Professor Fulton C. Noss Faculty Fellow

Graduate Administrator ANNEMARIE VRANESEVIC

KELLY RUNCO

MINERVA PILACHOWSKI

Department Administrator

KAREN BURSIC

Undergraduate Administrator

OLEG PR OKOPYEV

Associate Professor

JEFFREY KHAROUFEH

Associate Professor

JAYANT RAJGO PAL

LARRY SHUMAN

Assistant Professor Director of Undergraduate Program

Professor Director of Graduate Program

Distinguished Service Professor Senior Associate Dean for Academic Affairs

BOPAYA BIDANDA

Ernest E. Roth Professor and Chair

INDUSTRIAL ENGINEERING

NATASA VIDIC

MOHAMMAD MOUSAVI

Degrees Granted (School Year Ending April 2014): BS: 64 MS: 54 PhD: 4

Graduate Enrollment: 113

Undergraduate Enrollment: 257

Assistant Professor

PAUL LEU

Assistant Professor

Assistant Professor

YOUNGJAE CHUN

Assistant Professor

ANDREW SCHAEFER

Professor Wellington C. Carl Faculty Fellow

SWANSON SCHOOL OF ENGINEERING

12

Professor

GER ALD MEIER

SCOTT MAO

Degrees Granted (School Year Ending April 2014): BS: 139 MS: 72 PhD: 16

Graduate Enrollment: 284

Undergraduate Enrollment: 531

William Kepler Whiteford Professor

MINKING CHYU

William Kepler Whiteford Professor

JOHN BARNARD

Leighton E. and Mary N. Orr Chair Professor Associate Dean of International Affairs

Professor

ALBERT TO

PATRICK SMO LINSKI

SYLVANUS WOSU

Associate Professor Associate Dean of Diversity Affairs

Associate Professor

IAN NETTLESHIP

JUNG-KUN LEE

Associate Professor

Associate Professor

DANIEL COLE

Associate Professor Interim Director of Nuclear Engineering Program

LAURA SCHAEFER

Professor Board of Visitors Fellow

ANTHONY DEARDO

Associate Professor

SUNG KWO N CHO

Associate Professor

ANNE ROBERTSON

William K epler Whiteford Professor & Director of Center for Faculty Excellen ce

WILLIAM CLARK

William Kepler Whiteford Professor Director of BAMPRI

ISAAC GARCIA

Research Professor

GUOFENG WANG

Graduate Administrator CARO LYN CHUHA

COLE VAN ORMER

HEATHER MANNS

Undergraduate Administrator

SHANNON KELLY

Assistant to the Chair

NITIN SHARMA

Assistant Professor

WILLIAM SLAUGHTER

Associate Professor Director of Undergraduate Program

QING-MING W ANG

Professor Wil liam Kepler Whiteford Faculty Fellow Director of Graduate Program

MARK KIMBER

Assistant Professor

Research Specialist

PAOLO ZUNINO

Assistant Professor

TAVIS JACO BS

MARKUS CHMIELUS

Assistant Professor

Assistant Professor

JORG W IEZOREK

Professor

PEYMAN GIVI

James T. MacLeod Professor Co-Director of CMS PhD Program

Assistant Professor

JEFFREY VIPPERMAN

Professor

GIOVANNI GALDI

Leighton E. and Mary N. Orr Professor

BRIAN GLEESON

Harry S. Tack Chair Professor and Chair Director of Center for Energy

MECHANICAL ENGINEERING AND MATERIALS SCIENCE

SWANSON SCHOOL OF ENGINEERING

Administrator KELLY WODNICKI

Departments and Degree-Granting Programs Bioengineering Degrees Offered: BS, MS, and PhD in Bioengineering Areas of Specialization: Bioengineering research at the University of Pittsburgh incorporates the application of engineering and biologic principles, methods, and technology in two broad areas: scientific inquires into fundamental biological and biophysical phenomena; development of instrumentation, materials, devices, and systems relative to application in the biological sciences and medicine. Active, externally funded areas of research include: computer processing of biologically derived signals; computer analysis of radiographic, ultrasonic, and nuclear magnetic resonance images; gene therapy and adult stem cells; development of prostheses, artificial organs, and implantable sensors; ultrasound; neural tissue engineering; structure, function, and interactions of individual biological macromolecules; cell migration; development of medically related instrumentation; mathematical modeling of physiological systems; tissue engineering and regenerative medicine; biomaterials and biocompatibility; musculoskeletal biomechanics and sports medicine; cardiovascular biomechanics; bladder biomechanics; rehabilitation biomechanics; ergonomics and occupational biomechanics. Further details regarding individual research programs can be found on the websites of Laboratories and Groups directed by our faculty and of their Affiliate Institutions and Departments Chemical and Petroleum Engineering Degrees Offered: BS, MS, PhD in Chemical Engineering; MS in Petroleum Engineering Areas of Specialization: Active areas of research in the Department include Biological and Biomedical Systems; Energy and Sustainability; and Materials Modeling and Design. Additional research areas exist in programs that have exploited opportunities at the interface between disciplines. The Department’s recognized research activities impact the following boundaries between established disciplines: Biotechnology/Environment; Biology/Engineering; Energy/Environment; Polymer Chemistry/Physics; and Catalysis/Chemistry/Materials; Catalysis/Energy; Catalysis/Environment.

Civil and Environmental Engineering Degrees Offered: BS, MS, and PhD in Civil Engineering Areas of Specialization: Solid mechanics; structural mechanics; structural engineering; mechanics of fluids; geotechnical engineering; hydraulics; hydrology; water resources engineering; civil engineering design; construction management; environmental engineering

13

Electrical and Computer Engineering Degrees Offered: BS, MS, PhD in Electrical Engineering BS, MS, PhD in Computer Engineering (joint with Computer Science Department) MBA/MSECE Areas of Specialization: Biomedical devices and signal processing; electric power systems and smart grid; power electronics; nano-photonics and nanoelectronics; green computing with nanoscale technologies; radio frequency technologies and RFID; low power computing—architectures and circuit techniques; optoelectronic sensors, lasers, and ultra-fast optoelectroncs; digital signal and image processing; pattern recognition; heterogeneous system simulation.

Industrial Engineering Degrees Offered: BS, MS, and PhD in Industrial Engineering Areas of Specialization: Operations research; manufacturing systems; information systems; engineering management; computational optimization; automatic data collection technologies; medical decision making; activity based costing; mathematical programming; scheduling, production and inventory control; computeraided design; computer-aided manufacturing; manufacturing technologies for bio-medical products; simulation; stochastic models; robotics; total quality management; health systems applications; engineering education; project management, and product development; wireless systems.

Mechanical Engineering and Materials Science Degrees Offered: BS, MS, and Ph.D. Areas of Specialization: Kinematics; dynamics; thermodynamics; heat transfer; fluid mechanics; mechanical measurements; mechanical design; vibrations; acoustics; mechanical and thermal systems; stress analysis; energy utilization; fuel cells; advanced energy technology; solid mechanics; continuum mechanics; biomechanics; micro-electrical-mechanical systems; nanotechnology sciences; manufacturing and controls; ceramics; metallurgy; materials science engineering.

Interdisciplinary Programs Bioengineering Joint MD/PhD (Bioengineering) Program Dual BS Degree Program in Bioengineering & Chemical Engineering Joint MBA/MS (Bioengineering Program) Chemical and Petroleum Engineering Degrees Offered: MBA/MSChE in Chemical and Petroleum Engineering

14

Civil and Environmental Engineering Degrees Offered: MBA/MSCEE in Civil and Environmental Engineering Electrical and Computer Engineering Degrees Offered: MBA/MSECE, PhD in Electrical and Computer Engineering Industrial Engineering Degrees Offered: MBA/MSIE in Industrial Engineering Mechanical Engineering and Materials Science Degrees Offered: MBA/MSMSE

Undergraduate Programs Computer Engineering Degrees Offered: BS in Computer Engineering (with Arts and Sciences) Areas of Specialization: VLSI design; digital system design; computer architecture; embedded systems; software engineering; microprocessor systems; operating systems; optoelectronic information processing; digital design; VHDL design and tools development; parallel processing; programming languages.

Engineering Physics Degrees Offered: BS in Engineering Physics Areas of Specialization: Electronics, electromagnetic materials, modern physics, optics, applied thermodynamics.

15

Swanson School of Engineering Special Academic Programs First Year Engineering Academic Program – Integrated Curriculum The School of Engineering’s First Year Engineering Academic Program consists of a welldesigned series of integrated courses in mathematics, chemistry, physics and engineering. All engineering first year students pursue this common, integrated core, which includes an honors component for the most academically gifted students. The two specially designed engineering courses (ENGR 0011 and 0012) not only introduce students to basic engineering skills and problem formulation and solving methodologies, but also provide an overview of the various engineering disciplines. A unique aspect of the program is the integration of instructors from the English Writing Center and the School of Engineering Bevier Library staff into the first year coursework. As a result, students complete two major writing projects: a first semester paper describing in-depth an area of engineering that the student is interested in as a possible major and a second semester paper that is part of the professionally run Annual Freshman Engineering Conference, in which all first year engineering students participate. This later paper must be on a relevant engineering topic and include a discussion about sustainability. Student papers are arranged into sessions chaired by professional engineers. Session chairs meet with the students during the semester, critiquing the developing papers and offering suggestions for improvement.

First year engineering students also participate in a two-term engineering seminar (ENGR 0081 and 0082), conducted in part by upper class peer advisors. These seminars provide general information on the transition to college, the improvement of study skills, and an overview of the various engineering fields. Moreover, students are given several opportunities to visit the various programs to discuss with faculty their anticipated program of study.

In addition to these opportunities, the First Year Engineering Program office provides career and academic advising, workshops, and assistance with the Engineering Living Learning Community which is located in Forbes Hall. Special programming is also conducted in Sutherland Hall, the LLC for first year honors students.

Honors Options A selected number of outstanding students are offered the opportunity to take ENGR 0711 instead of ENGR 0011 during the Fall Term. This accelerated course covers the two-course sequence in one term, enabling students to choose from two special courses in the Spring Term: • ENGR 0712 provides an opportunity to learn mathematical modeling and research methodologies with one of the School’s most distinguished faculty • ENGR 0715 provides students with an opportunity to apply engineering methodologies in a service learning environment with local organizations.

ENGR 0715 Engineering Applications for Society is a unique, rewarding learning experience for first year engineering students who have completed the prerequisite ENGR 0711 Honors Engineering Analysis and Computing Fall semester course. The course provides a “Service Learning” experience through which students learn and develop valuable skills necessary to succeed as an engineer by solving a real problem of value to a local community organization.

The goal for this course is to create a win-win experience for both the students and the community organizations. In return for their participation in the students’ educational process, the

16

community organizations benefit by having a problem of value addressed or “solved” by the students.

Not only are the students rewarded by the satisfaction of solving a real problem of value to their community, but through this experience they learn many personal and professional skills that cannot be learned in a traditional engineering curriculum. In particular, they learn that solving problems as an engineering professional truly involves more than the equations learned in classrooms where the answers can be found at the end of a book.

International Programs The Swanson School of Engineering has been one of the first engineering programs in the country to recognize the increasingly international dimensions of engineering practice. To us, this not only means that a large proportion of our graduates must be prepared for overseas assignments, some of which may be of long duration, but it also means that a substantial portion of engineering work will continue to be sent offshore to technically competent engineering graduates who demand salaries that are considerably less than current US salaries. The implication is clear – US engineering education will have to change if our graduates are to remain competitive in the market place and bring value beyond their technical skills.

Consequently, a major long-range objective has been to create a broad, coordinated program of international opportunities for our students that enable them to learn to work as engineers in cross-cultural environments. This suggests creating a variety of courses and exchanges, including some in which Pitt engineering students join international students in design projects working both virtually and on-site.

Swanson School students have the option to choose to study abroad for a semester, a summer, or as part of a short-term program (of four weeks or less), as well as to participate in an international research experience, internship, or service learning project.

Much of our success is due to the Swanson School partnering with the International Business Center and the College of Business Administration. We have also worked closely with the University Center for International Studies (UCIS), its area studies centers, and especially the University’s Study Abroad Office. These partnerships have resulted in several successful initiatives, several of which are outlined below: The Plus3 Program - The “Plus 3” program is for rising sophomores. It builds upon material covered in Managing Complex Environments for CBA students and ENGR 0012 for engineering students. The School of Engineering has participated actively for the past several years, sending both faculty and students abroad. The three-credit course begins with four preparatory class sessions in March and April, followed by a two-week study trip in early May, then ends with each student team presenting a final report in early September. During the two-week trip, business and engineering students work in teams as they make a number of company visits and prepare a report on a particular industry. Pitt students also have an opportunity to interact with local students, hear guest lectures and make several cultural visits while in the host country. Each trip is led by a faculty member accompanied by a support staff from Engineering, the College of Business Administration, or the University Center for International Studies (UCIS). The Plus3 program aims to cultivate interest in foreign language study and future study abroad. This is particularly important for engineering students, as the discipline has traditionally been less well-represented due to time constraints imposed by strict curriculum requirements. The Plus3 model has been so successful that the University of Pittsburgh has adopted it to create “Integrated Field Trips Abroad,” now a component of courses across the university curriculum. The Plus3 Program received the 2005 Institute for International Education’s Heiskell Award for innovation in study abroad.

17

Engineering for a Better Environment Brazil – this short-term program is offered to students who have an interest in renewable energy. The program, which is offered as a three credit course at Pitt, introduces students to various forms of green energy in Brazil.

Engineering in the Americas Before Columbus: Cusco, Peru – this short-term program is offered to students with an interest in structures. The program, offered as a three credit course at Pitt, brings students to Cusco, Peru to study sites from the Incan culture and to work directly with a local community to address a technical issue relating to structures.

Engineering in the Americas Before Columbus: Belize - this short-term program, developed as an alternative to the Cusco, Peru location, is offered to students with an interest in structures. The program, offered as a three credit course at Pitt, brings students to Belize to study sites from the Maya culture and to work directly with a local community to address a technical issue relating to structures.

Engineering of the Renaissance: Pitt in Florence – this four week, six credit program focuses on exploring various sites of significance to the development of the European Renaissance. By visiting the actual places where the great minds of the Renaissance- including da Vinci, Galileo, and othersactually conducted their research and studies, students are introduced to the important principles of engineering and physics that were developed during this period.

Undergraduate Student Exchange with the Universidad De Montevideo – this three credit, two-week course on “Global Supply Networks and Manufacturing Cultures in Latin America” was developed in collaboration with colleagues at the Universidad De Montevideo. It provides participants with an understanding of international supply chain operations with a special focus on Latin American and Uruguay. The two-week study visit to Uruguay enables students to place their understanding of those concepts within an international, cross-cultural context. As part of our agreement with the Universidad de Montevideo, we accept their students as part of an exchange, where they can study at Pitt for a full academic semester.

INNOVATE (International Technology, Innovation and Leadership Conference) – this program was created by Rice University and IAESTE in 2004. The Swanson School joined (in 2012) as a sponsor and created a special course, ENGR 1600, in conjunction with the INNOVATE Symposium.

This ten-day study trip for a large group of US students and several international students in early March visited several countries in Asia. The Symposium addressed how technology has driven globalization and business decision-making. The ENGR 1600 course was taught as a collaborative effort between Pitt and Rice University using video conferencing. It was divided into three sections: the pre- and post-trip phases and the actual trip. Prior to the trip, the course focused on topics related to Asian countries and globalization, with guest speakers drawn from Asian Studies alumni with expertise in Asia. These lectures provided the basis for comparative discussion and analysis. Topics included: leadership, technology trends, history and politics, economics, contemporary culture and demographics, and specific analysis of different business sectors. After returning, students documented their experience, through an end-of-semester formal paper and presentation at the annual Alumni Dinner.

Internship and Exchange opportunities in Germany The University signed an exchange agreement the UAS-7 Consortium – seven Germany universities (Berlin School of Economics, Bremen University of Applied Sciences, Cologne University of Applied Sciences, Hamburg University of Applied Sciences, Munich University of Applied Sciences, Münster University of Applied Sciences, Osenabrück University of Applied Sciences) whose core academic strength is their engineering/technical degree programs. The agreement allows for the exchange of students from the UAS-7 universities and the University of Pittsburgh for study and internship experience.

18

As part of this exchange agreement, SSOE undergraduate students can be selected to participate in the UAS-7 Consortium’s “Study and Internship Program (SIP) in Germany” Program. Selected students spend the fall semester taking courses at one of the Universities of Applied Sciences, and spend the spring semester doing a full-time internship at a German organization that is arranged by their host university. Students in the SIP program receive substantial funding from Germany to participate in this program.

FIPSE-CAPES Program (Brazil) - In AY 2007-2008, an agreement was signed for the federally-funded FIPSE-CAPES program: “US-Brazil Partnership in Sustainability and Innovative Design (S&ID) between the SSOE and two Brazilian institutions, the University of Campinas (UNICAMP) and the Federal University of Espirito Santo (UFES). This agreement allows for the exchange of SSOE students and UNICAMP and UFES students for study, as well as a provision for key faculty to develop curricular projects that focus on issues of sustainability, product realization, and innovative design.

In AY 2010-2011, a new FIPSE CAPES agreement was signed for the project “Bilateral Development on Aeronautic Skills between U.S. and Brazil” between the SSOE and two new Brazilian institutions, the Federal University of Itajuba (UNIFEI) and the Federal University of Parana (UFPR).

This agreement has allowed the exchange of students and faculty, as well the development of innovative shared curricula. To date, 17 Swanson School of Engineering students have participated in both of our FIPSE CAPES programs.

Energy Today – Energy Tomorrow: Australia. This 12-week, 12-credit certificate program involves course work in the Swanson School of Engineering and the University of New South Wales (UNSW). Students also conduct independent research with a faculty member and write a paper on a topic related to their research and an area covered in the academic program. Course content at Swanson School of Engineering consists of power generation and energy efficiency. Courses at UNSW cover the following topics: world energy, energy and sustainable development, energy and the built environment, emerging energy technologies, and renewable energy. The Australian component of the program begins in Darwin for three days, and then students will travel to Sydney and be based at the main UNSW campus. There will be a brief stop-over in Melbourne. The last week of the course is in Cairns.

Students who complete the full program – two Pitt courses, the UNSW summer program and submit an acceptable paper will receive the Certificate in Energy Today – Energy Tomorrow.

Engineering the German Way: Munich. This 3-week, 4-credit program is offered in conjunction with the Munich University of Applied Sciences in May. This intensive term highlights the German approach to engineering from various perspectives. Academic course modules include R&D management, introduction to production and manufacturing systems, digital factory layout and factory simulation, product ergonomics, cooperation between unions and employers and the impact of technology laws in Europe on manufacturing. The program is designed to split time between the classroom and integrated field experiences at various industry locations around Munich. Each technical component of the course is combined with a factory tour to gain deeper insights.

Globex (Beijing, China) - this 4-week (spent in China), 6-credit program provides the opportunity to study two of a variety of engineering courses including Cell and Tissue Transport, Nano materials and Nanotechnology, Cross Cultural Design for Service, Mechanics of Solids, Manufacturing Engineering, Biomaterials and Biocompatibility, or Photovoltaics: Solar Energy. The courses are taught through a combination of classroom lectures, projects, and presentations in a very exciting and modern society. This is a joint study abroad program with Peking University (PKU).

19

The French Nuclear Fuel Cycle: Normandy, France. This two-week, 3-credit program is based in Rouen, France and is run in partnership with ESIGELEC, a French graduate school of electrical engineering. The French have the most complete implementation of the nuclear fuel cycle of any country in the world. AREVA, a French public multinational industrial conglomerate, is mainly known for nuclear power. Their interests in the nuclear power includes mining, milling, conversion, enrichment, fuel fabrication, the design and construction of nuclear power plants, the service of nuclear power plants, used/spent nuclear fuel storage, the reprocessing of used/spent nuclear fuel, the fabrication and utilization of mixed oxide fuel. The French agency CEA, Commissatiat Ă l'Energie Atomique, conducts research on advanced fuel cycles, advanced applications of nuclear power, applications of radioactivity, and the longterm disposal of radioactive waste. This course will acquaint the student with the nuclear fuel cycle via the implementation of the French nuclear fuel cycle. The course will provide introductory material on the nuclear fuel cycle in the classroom at the University. Then the students will travel to France to interact with nuclear engineering academics, engineers and scientist working in the area, and tour facilities in France.

Semester-Long Engineering Exchanges. The Swanson School of Engineering has agreements with over 45 engineering schools from around the world. These institutions provide at a minimum some instruction in English. Exchanges allow Swanson School of Engineering students the opportunity to pursue a full-semester of coursework in their academic major at a foreign institution.

Student Organizations Engineers Without Borders - is a non-profit, humanitarian organization dedicated to improving the quality of life in developing communities via small engineering projects. EWB addresses problems of health, sanitation, economy, technology, or education by partnering with the community to design an appropriate and sustainable solution. The University of Pittsburgh student chapter is currently completing an international project that involved assessment, design and implement of a sustainable fish farm to provide a source of protein and trade for the community of Makili, Mali, West Africa. Student members and professional mentors from the Pitt chapter traveled to Makili in order to complete assessment and implementation phases of this project.

Engineers for a Sustainable World - is a non-profit organization of technically-minded individuals working on improving solving sustainability challenges through technical design projects and educational initiatives. ESW's members and student chapters work on their campuses, in local communities, and internationally. The University of Pittsburgh chapter has a strong record of collaboration with local communities, including rainwater catchment systems for the local neighborhood of Oakland, designing green renovations for the town of Vandergrift, and a current project to revitalize a pond and community center in the town of McKeesport. The chapter also proposes and implements multiple smaller on-campus projects every year, including Pitt's inter-dorm energy reduction competition and a rain garden at the Petersen Events Center.

Engineers for Sustainable Medical Development (ESMD) - is a multi-disciplinary, multi-school student-run organization comprised of students in the fields of engineering, premedicine, and business. ESMD is directed toward providing students with the skills and resources necessary to design and implement novel, low-cost healthcare technology and processes suitable for markets on a global scale. Currently a student design team is working on design of a portable ocular microscopy mount in conjunction with a larger project at the Ear and Eye Institute that is funded by the Coulter Program. ESMD holds weekly workshops to teach skills such as SolidWorks design, soldering, and working with microprocessors. ESMD volunteers also help to refurbish wheelchairs weekly at Global Links, an NGO with operations and contacts throughout

20

Central America. EMSD is working with Global Links to create an international immersion experience that would provide EMSD members with an opportunity to work directly with health care providers in developing countries.

Cooperative Education Program (Co-Op) The co-op program had a strong year. The year ended with a total of 963 active students, including 935 undergraduates and 28 graduate level co-ops, which is almost a 10% increase over last year’s rate of participation. Numbers from the previous year included 847 active undergrads and 31 graduate level co-ops. New placements for the year rose from 365 new placements in 2012-2013, to 377 students in 2013-2014. Our company participation rose to over 265 employers. The program also demonstrated strong numbers in the diversity of the program participants.

Our post-graduate survey of BS level students entering the workforce reported that 48% of the co-ops received full-time offers from their companies, and 83% of those students accepted. The average starting salary for a co-op who graduated and entered the work force was $63,508. The average GPA of a graduate who participated in co-op was 3.277. The report shows 92% placement of the co-op engineering graduates, based on a 96% response rate. There was 100% placement among the computer science co-op graduates and computer engineering graduates who responded to the survey.

Our Co-op Employer of the Year for 2013 was Eaton Corporation, a long-time supporter of the Swanson School of Engineering and co-op program. Their co-op program has become a benchmark for other companies to follow. Students will work at least one term at a manufacturing site in addition to the corporate headquarters. Eaton is a true partner to Pitt’s co-op program as well as a partner to various departments within the Swanson School. We are looking forward to expanding our Eaton relationship and congratulate them for this honor.

Pitt’s Co-op Student of the Year was Haotian Howard Wang, who went on to become the American Society of Engineering Education’s Co-op Student of the Year for 2013. Howard made exceptional contributions to the Swanson School of Engineering as well as his co-op employer, Lubrizol, where he spent four work sessions. Haotian was instrumental in streamlining some of the processes at Lubrizol, which made significant savings for the company.

Our goals for the 2014-15 year will be to increase our number of student and employer participants while retaining the quality of our program. We particularly look to expand the program in the areas of bioengineering and chemical engineering due to the expansion of student participation from those areas.

Sustainable Engineering Undergraduate Research Program through Mascaro Center for Sustainable Innovation The Mascaro Center for Sustainable Innovation (MCSI) is a center of excellence in sustainable engineering focusing on the design of sustainable neighborhoods. MCSI encourages and nurtures new collaborative projects based on strong and innovative research, translating the fundamental science of sustainability into real products processes. Our goal is to create innovations that positively impact the environment and improve quality of life. Our research includes projects on greening the built environment, increasing sustainable use of water, and designing distributed power systems.

21

MCSI currently offers two summer undergraduate research programs- International Research Experience for Students (IRES) and Undergraduate Research Program (URP). IRES, funded by the National Science Foundation, is a program that creates an innovative research experience in sustainable design for a select group of undergraduate engineering students. The students participate in a 12-week summer internship as a part of a research team. The teams are co-led by faculty from the University of Pittsburgh and faculty from Brazil. They spend four preparatory weeks in Pittsburgh before traveling to Brazil to spend the four weeks in residence at UNICAMP in Brazil. They return to spend the final four weeks in Pittsburgh.

Undergraduate Research Program (URP) is an internally supported program aimed at providing talented students with creative opportunities that go beyond the engineering classroom curriculum and enables students to develop their own ideas and work independently on hands-on research projects in sustainable engineering with advice and guidance from a faculty mentor.

MCSI currently offers a 12-week undergraduate summer research program aimed at providing talented undergraduate students with creative opportunities that go beyond the engineering classroom curriculum and enable them to develop their own ideas and work independently on hands-on research projects in sustainable engineering with advice and guidance from a faculty mentor.

Pre-College and Undergraduate Diversity Programs The Swanson School of Engineering implements programming that promotes and supports the academic excellence of high achieving pre-college and undergraduate students from groups traditionally underrepresented in science, technology, engineering and mathematics (STEM) fields. INVESTING NOW is the pre-college diversity program and Pitt EXCEL is the undergraduate diversity program.

These two initiatives provide a continuous pipeline for students from groups traditionally underrepresented to prepare for, enter and graduate from the University of Pittsburgh as STEM majors.

INVESTING NOW Created in 1988, INVESTING NOW is a college preparatory program designed to stimulate, support and recognize the high academic performance of pre-college students from groups that are underrepresented in science, technology, engineering and mathematics (STEM) majors and careers. The purpose of the program is to ensure that participants are well prepared for matriculation at the University of Pittsburgh. The primary goals are to 1) create a pipeline for well-prepared students to enter college and pursue science, technology, engineering and mathematics majors; 2) encourage and support students’ enrollment and achievement in advanced mathematics and science courses; 3) ensure that the participants make informed college choices; 4) support and encourage parents in their roles as advocates for their children; and 5) coordinate partnerships between the University of Pittsburgh’s Swanson School of Engineering and local and regional schools.

INVESTING NOW recruitment, which focuses on eighth grade students, takes place in the spring of each academic year. However, membership involves a student commitment to attend year-round programming from ninth through twelfth grade. Some of the student activities include academic advising, tutoring, hands-on science and engineering workshops, college planning sessions, summer enrichment classes and SAT preparation. Approximately 200 students, including the 2014 graduates and the newly admitted eighth grade students, participated in the INVESTING NOW program during the 2013-2014 academic year.

22

In 2014, 33 INVESTING NOW students graduated from high school. 15% of those students currently attend the University of Pittsburgh main campus. 100% of the graduating class enrolled in college for 2014-2015. In addition, 63% of the students are majoring in science, technology, engineering or mathematics fields at various colleges and universities.

Pitt EXCEL Program Pitt EXCEL is a comprehensive program committed to the recruitment, retention and graduation of academically excellent undergraduates, particularly individuals from groups traditionally underrepresented in the field. Program activities include academic counseling, tutor and study sessions, engineering research and mentoring opportunities, graduate school preparation and career development workshops, as well as a two-week intensive chemistry, math, physics and study skills review session for pre-freshmen entitled the Summer Engineering Academy. Brief descriptions of the major programs sponsored by Pitt EXCEL are highlighted below: Summer Research Internship (SRI) Each year, selected Pitt EXCEL students participate in a nine-week Summer Research Internship (SRI) Program. Students are assigned to faculty mentors who lead research teams. Each student meets regularly with Pitt EXCEL academic counselors to review daily journals, discuss progress, and collaboratively discover innovative solutions to engineering problems. The primary objective is for students to develop a positive relationship with a role model in their discipline of engineering. Additional objectives for facilitating a mentoring partnership include: personal and career guidance; access to the professional community; and guidance that will ease the transition from school to work or undergraduate to graduate school. There were ten students and ten faculty mentors involved in the 2014 Summer Research Internship Program.

Summer Engineering Academy The Summer Engineering Academy is a two-week residential program for incoming engineering students that enable them to make a smooth transition from high school to college. During the program, students learn essential study skills for college and receive an intensive review of chemistry, math and physics concepts, with an introduction to engineering problem solving. There were 24 incoming first year engineering students who participated in the 2014 Summer Engineering Academy class; this number included ten females and fourteen males.

Undergraduate Enrollment The School continues to have measurable success in the education of students from groups traditionally underrepresented in the field of engineering. Figures from the beginning of academic year 2013-2014 indicate that there are approximately 179 ethnically underrepresented (African American, Hispanic and Native American) students enrolled, representing 6.8% (179/2625) of the undergraduate student body in the School and 3.1% (81/2625) multiracial undergraduate students. Female students represent 25.5% (669/2625) of the undergraduate student body.

23

Undergraduate Graduation 39 ethnically underrepresented students (31) African Americans, (7) Hispanic, and one Native American) graduated from the Swanson School of Engineering during the 2013-2014 school year, representing 7.2% (39/538) of the graduates for the year. Thirteen multi-racial students graduated, representing 2.4% (13/538) of the graduates. In addition, 121 women graduated during the year, representing 22.5% (121/538) of all graduates.

DIVERSITY GRADUATE ENGINEERING INITIATIVES The Engineering Office of Diversity (EOD) administers the Diversity Graduate Engineering Initiatives to identify, prepare, and recruit traditionally underrepresented students for graduate engineering education through partnerships with student organizations, graduate research experience and diversity graduate fellowships and scholarships.

GRADUATE RECRUITMENT PROGRAMS Pre-PhD Undergraduate Research Experience (PURE) program The purpose of the Pre-PhD Summer Experience is to create a pipeline for students who wish to pursue PhD degrees in engineering at the University of Pittsburgh and support their preparation and transition to SSoE. The Engineering Office of Diversity (EOD) identifies engineering students with GPA of 3.5 and from groups traditionally underrepresented in engineering from institutions across the nation.

The students are chosen by extensive information including GPA, interviews, essays, research interests and recommendations. Students are assigned faculty mentors who lead multidisciplinary teams in advanced research are expected to challenge the students and inspire them for graduate education Each student is required to work a minimum of 30 hours per week on faculty guided research, meet with faculty mentor regularly, attend bi-weekly mentoring sessions with the Associate Dean for Diversity, participate in an ethics forum, keep a personal daily research journal, prepare literature reviews, write a journal quality paper on research findings, and present research results to faculty and graduate students at the end of the program.

Discover Graduate Engineering Education The Discover Graduate Engineering Education event hosts junior and senior undergraduate students and engineering graduates from partner Universities to continue to build a pipeline of students applying to the SSoE. The students spend two nights and 1.5 days meeting faculty and graduate students, visiting labs, touring the City and PITT campus and learning about the importance of graduate school.

Graduate Diversity Fellowships The EOD has implemented an aggressive strategy to recruit underrepresented graduate students, expand college visits and widen fellowship opportunities. With the support of the Office of the Dean, the Office of the Provost, and the Office of the Chancellor, the University of Pittsburgh is a member in the National GEM (Graduate Engineering Minority) Consortium. The GEM Consortium program awards fellowships designed to offer opportunities for undergraduate students to obtain M.S. and PhD degrees in engineering through a program of paid summer internships and graduate financial assistance. One GEM Fellow is continuing her studies in Bioengineering.

Ten K. Leroy Irvis Fellows are continuing their studies in 2014-15; seven in Bioengineering two in Mechanical Engineering, and one in Electrical and Computer Engineering. One Irvis Fellow graduated with an MS degree in Industrial Engineering in spring 2014. Two K. Leroy Irvis Fellowships have been given for 2014-2015; one to a Bioengineering student and one to a Chemical and Petroleum Engineering student.

24

The Dean’s Graduate Diversity TAs continues to be a positive incentive to departments that make best efforts in the recruitment of students from diverse backgrounds. Eight terms have been given for the 2014-15 year to departments: Bioengineering received 2; Chemical and Petroleum Engineering received 2; Civil and Environmental Engineering received 1.5; Mechanical Engineering and Materials Science received 2.5.

GRADUATE RETENTION PROGRAMS Graduate Student Organizations The Engineering Diversity Graduate Student Association (EDGSA) was created in 2011 as a network of minority graduate engineers. The purpose of EDGSA is to foster an opportunity where minority graduate students can connect and network with each other as accountability partners to provide a strong support group for the challenges and emotional supports for academic retention and transition to professional careers within engineering. EDGSA students also serve as peer mentors to NSBE and SHPE as models to follow in graduate education.

The Graduate Women in Engineering Network (GWEN) is a newly recognized student organization whose mission is to retain women in STEM fields, promote women in leadership capacities, and create an official network for women in engineering. GWEN, although founded in 2005, was reactivated in 2013 as an official women graduate student organization by female faculty members and EOD as major voice for women’s issues at SSoE. As with EDGSA, GWEN also serves as peer mentors to SWE as models to follow in graduate education and retention of more women in engineering.

STATISTICAL PERFORMANCE MEASURES Graduate Enrollment and Graduation: The School of Engineering has had success in increasing the numbers of female and underrepresented students enrolled in its MS and PhD programs. There were 140 female MS students in 2013-14, an increase of 17. The number of underrepresented MS students enrolled decreased from 12 in 2012-13 to 9 in 2013-14. The number of multiracial students increased from 1 in 2012-13 to 6 in 2013-14. The number of female PhD candidates increased from 95 in 2012-2013 to 103 in 2013-14. The number of underrepresented PhD candidates increased from 13 in 2012-13 to 17 in 2013-14. Multiracial students increased from 3 in 2012-13 to 5 in 2013-14.

Of 69 PhD degrees conferred between August 2013 to April 2014, 16 were upon women (23%). Four PhD degrees were awarded to underrepresented minority students in 2013-14 (16.5%). Of the 241 Master Degrees awarded in 2013-14, 64 were awarded to women (26.5%). Five were awarded to underrepresented students (20.7%).

25

PhD Enrollment and Degree

2004-05 2005-06 2006-07 2007-08 2008-09 2009-10 2010-11 2011-12 2012-13 2013-14

SCHOOL TOTAL PHD PHD (E) (D) 258 36 274 49 276 44 288 37 321 48 349 52 389 57 387 50 413 58 419 69

WOMEN URS PHD PHD PHD PHD (E) (D) (E) (D) 75 8 17 2 92 10 14 1 92 12 14 2 92 12 12 1 96 18 14 2 99 21 18 1 102 22 17 3 90 8 14 0 95 10 13 1 103 16 17 4

MS Enrollment and Degree Multi racial PhD ( E)

3 5

SCHOOL TOTAL MS MS (E) (D) 304 135 270 116 276 92 272 117 314 93 402 132 426 165 475 189 523 176 562 241

WOMEN MS MS (E) (D) 56 27 51 27 52 16 48 29 64 20 73 35 86 28 98 50 123 39 140 64

URS MS MS (E) (D) 15 14 19 6 16 7 13 8 19 6 18 9 17 4 17 11 12 4 9 5

Multiracial MS ( E)

1 6

George M. Bevier Engineering Library The George M. Bevier Engineering Library provides access to books and journals both in print and electronically, in addition to a wide variety of databases to serve the teaching and research needs of following disciplines: engineering, physics and astronomy, mathematics, geology and planetary sciences, and statistics. The Library is named in honor of George M. Bevier (BSE, ’43) a pioneering geologist, geophysicist and engineer. Library patrons can access the collection of the University Library System's Digital Library via PITTCat+, an on-line catalog. Specifically, the University Library System also provides access to many remote resources for the University of Pittsburgh faculty, students, and staff, including Compendex, Scopus, ScienceDirect, Knovel and thousands of electronic journals from publishers, including the American Chemical Society, the Institute of Physics, Elsevier and Wiley.

PITTCat+ and other databases are available through the ULS website at http://www.library.pitt.edu/ The University of Pittsburgh is a member of the Association of Research Libraries with extended memberships in several other library consortia which include PALCI and NERL.

26

Research Facilities, Centers and Institutes The strength and diversity of the School’s research centers and institutes reflect the interrelationship and often complementary nature of faculty research activities. The concept of centers and institutes within the University and the Swanson School of Engineering takes advantage of this natural grouping process, thereby producing synergistic interactions that enhance the faculty research capabilities. Consequently, the scope of research that can be addressed by any group of faculty is expanded significantly. The students who participate in center and institute research have a unique opportunity to be involved in important projects throughout their graduate experience. Furthermore, centers and institutes represent an attractive opportunity for corporate and agency sponsorship of both basic and applied research. There are a number of centers and institutes that exist in the University and the Swanson School of Engineering and several that are in various developmental stages. The following are brief descriptions of existing centers and institutes.

The Michael L. Benedum Hall of Engineering Students enrolled in the University of Pittsburgh Swanson School of Engineering receive their education in the modern, well-equipped Michael L. Benedum Hall of Engineering. The building complex is named in honor of Michael L. Benedum, a pioneer in the oil industry and co-founder of the Benedum Trees Oil Company. A grant from the Claude Worthington Benedum Foundation enabled the University to purchase the land on which the engineering complex is built. The Michael L. Benedum Hall of Engineering consists of a completely air-conditioned 14-floor engineering tower and a separate 538-seat auditorium. Classrooms and offices occupy the perimeter of the building, with the library, student lounge and student activities offices located on the plaza level. Laboratories are confined to central bays with heavy-equipment laboratories located in the sub-basement, which extends under the entire complex. These large rooms accommodate special instructional facilities that approximate actual industrial conditions.

Interdisciplinary University of Pittsburgh Centers Involved with the Swanson School of Engineering University of Pittsburgh Applied Research Center (U-PARC) U-PARC, located 12 miles from the main campus is a multimillion-dollar, 55-building facility housing scientific equipment and services available to the University community. Over 100 corporations, including a number of emerging high-technology companies, have offices at U-PARC. In addition, several of the Swanson School of Engineering’s research groups maintain laboratories at this site. U-PARC’s pilot plant services range from petroleum, petrochemical, and chemical-based technologies to environmental, synthetic fuels, biotechnology, and other emerging technologies.

27

Bioscience Tower 3 (BST3) In the fall of 2005, the University of Pittsburgh formally opened the newly constructed, state-ofthe-art Biomedical Science Tower 3 (BST3), adjoining research facilities and UPMC clinical facilities as well as the medical school’s Scaife Hall. BST3, one of the most advanced research facilities of its kind, houses more than 50 laboratories occupied by approximately 500 scientists, graduate students, technicians, and support staff. Among the programs housed in BST3 are: • Center for the Neural Basis of Cognition (CNBC) • Center for Vaccine Research in Biodefense and Emerging Infections • Department of Computational Biology • Department of Neurobiology • Department of Structural Biology • Developmental Biology Group • Drug Discovery Institute • Pittsburgh Institute for Neurodegenerative Diseases (PIND) • Proteomics Core Laboratory • Regional Biocontainment Laboratory The Department of Bioengineering occupies approximately 5,500 of BST3’s 331,000 square feet, in close proximity to other research groups. The 10-story structure was built to stand as a national model for how modern laboratory space should promote interaction among scientists, foster more fruitful collaborations, and adapt to ever-changing research demands and priorities. Bioengineering research at BST3 includes applications of microtechnologies to explore cell polarity during vertebrate cell differentiation, cell and tissue mechanics during vertebrate development, biomaterials for neural prostheses and tissue regeneration, and unraveling how neural circuits transform sensory inputs into motor commands.

Neural Tissue Electrode Interface and Neural Tissue Engineering Laboratory (NTE)

(BST3)

This laboratory is under the direction of Tracy Cui, PhD. The primary research focus is on the interactions between neural tissue and smart biomaterials and biosensors. Research projects include neural prostheses biocompatibility, CNS biochemical sensing and drug delivery, neural stem cells and neural tissue engineering. The NTE lab provides a cross-discipline interface that brings bioengineer, neurobiologist, stem cell biologist and neurosurgeon together for rapid scientific discovery and therapeutic advancement. Multi-disciplinary research and training experiences are offered to graduate students, postdoctoral researchers and undergraduate students. The facility has all essential equipment to carry out biomaterial fabrication, electrochemistry, cell culture, animal surgery, in vitro and in vivo neurophysiology, histology and fluorescent imaging.

Morphogenesis and Developmental Mechanics Laboratory

(BST3)

This laboratory is directed by Lance Davidson and seeks to understand the rules and principles of self-assembly used by embryos during early development and to apply those principles to direct the self-assembly of engineered tissues. This research uses a number of techniques ranging from classical embryology to cell and molecular biology to cell and tissue biomechanics. The laboratory is equipped with a range of imaging tools from stereo-dissecting microscopes to laser scanning confocal microscopes. The group develops custom cell biological protocols and biophysical and biomechanical devices such as microaspirators, uniaxial unconstrained compression devises, and microstretchers to characterize the mechanical properties of small extremely soft biomaterials and to investigate the roles of mechanics during embryogenesis. Ongoing collaborations across a range of disciplines is seeking to extend systems biology approaches to investigate both chemical and mechanical processes driving

28

development and to apply this knowledge to forward-engineer the patterning and shaping of novel 3D tissue structures.

Sensory-Motor Integration Laboratory (BST3) This laboratory, located in Bioscience Tower 3, is under the direction of Aaron Batista, PhD. The lab's research goal is to design next-generation neural prostheses that can allow paralyzed individuals to control computers and robotic arms. The laboratory provides a cross-disciplinary training experience (neurophysiology, engineering, and computational analysis) for graduate students, undergrads, and postdocs. The lab features two state-of-the-art experimental rigs. During experiments, monkeys are placed into an immersive virtual reality environment. Via a multielectrode array, the animals' intentions are decoded from neural signals in motor cortex, and are used to steer a computer cursor to a specified goal. Equipment includes a 100-channel electrode amplifier, custom-built LabView-based software for rendering the visual stimuli and recording data, and trackers for the animals' arms and eyes. Students are involved in designing novel brain-computer interface algorithms, testing them experimentally, and conducting multidimensional statistical analyses. Currently, we are identifying the principles that will make neural prostheses accurate, reliable, and comfortable for the user.

Center for Assistive Technologies The Center for Assistive Technologies in the School of Health and Rehabilitation Sciences is comprised of rehabilitation engineers, physical and occupational therapists, and technicians which closely collaborate with a regional and national network of physicians, vocational counselors, educators, physical and occupational therapists, speech and language pathologists, rehabilitation technicians, consumers, and advocates in the provision of assistive technological services. Jorge Letechipia is Director of the Center for Assistive Technologies.

Center for Bioengineering The Center for Bioengineering was founded in 1987 to foster the application of the University's growing portfolio of research expertise in the areas of biotechnology and bioengineering.

Its mission includes the encouragement of the development of cross-disciplinary research teams by providing laboratory space and interdisciplinary educational programs. The Center site is located one mile from the main University of Pittsburgh campus. The Department of Bioengineering occupies about 12,600 sq. ft. of research space. The following bioengineering laboratories are currently housed at the Center: Musculoskeletal Research Center, MSRC (Dr. Savio Woo), Cardiovascular Systems Laboratory (Dr. Sanjeev Shroff), Biotransport Laboratory (Dr. Jack Patzer), Vascular Bioengineering Laboratory (Dr. David Vorp), Cell Migration Laboratory (Dr. Partha Roy), Computational Biomechanics Laboratory (Dr. Spandan Maiti) and Molecular Biological and Biophysical Core Facilities (Department).

McGowan Institute for Regenerative Medicine (MGOWN and BSP2) To realize the vast potential of tissue engineering and other techniques aimed at repairing damaged or diseased tissues and organs, the University of Pittsburgh School of Medicine and UPMC Health System have established the McGowan Institute for Regenerative Medicine. The McGowan Institute serves as a single base of operations for the University’s leading scientists and clinical faculty working to develop tissue engineering, cellular therapies, biosurgery, and artificial and biohybrid organ devices. The Institute mission includes the development of innovative clinical protocols as well as the pursuit of rapid commercial transfer of its technologies related to regenerative medicine. Regenerative

29

medicine is an emerging field that approaches the repair or replacement of tissues and organs by incorporating the use of cells, genes, or other biological building blocks along with bioengineered materials and technologies.

Medical Devices Laboratory: Biotransport, Pulmonary, and Cardiovascular

(MGOWN)

The Medical Devices Laboratory (formerly the Artificial Lung Laboratory) is part of the McGowan Institute for Regenerative Medicine (MIRM) under the director of William Federspiel. The lab is located in space allocated for the McGowan Institute approximately 47,000 square feet of labs, offices and conference rooms are dedicated to the Institute in two buildings. It houses approximately 20,000 square feet of MIRM labs and offices, including the Center for Preclinical Studies, laboratories, prototype machine shop, offices, and conference rooms.

Medical Devices Laboratory (~2300 square feet) The Medical Devices Laboratory provides space for the development and testing of hollow fiber membrane based cardiovascular devices related to mass transfer including several artificial lungs projects (acute, implantable, and extracorporeal), extracorporeal hemofiltration and hemoadsorption devices, and biohybrid artificial alveolar capillary modules. Expertise exists in handling and assembling membrane fiber components and devices, and functional testing of oxygenators, artificial lungs, polymer hollow fiber membrane or porous bead modules and other cardiovascular devices requiring perfusion loop testing in aqueous solution or blood. Additionally, the lab is equipped with necessary equipment for chemical modification of polymer samples and subsequent incorporation of biomolecules through covalent coupling. The lab includes over 200 linear feet of wet-lab bench space with nine desks and two chemical fume hoods. One area is equipped with a drainage sink and wallmounted stand for performance testing with fluid circuits, including blood circuits. Two additional sink areas are available at the end of bench space, each with de-ionized water hook ups. Central air and central vacuum are provided to each bench. The Medical Devices Laboratory is situated strategically within close proximity to the investigator's office, Flow Visualization Laboratory, and the Prototype Machine Shop.

Flow Visualization Laboratory (~342 square feet) The Flow Visualization Laboratory, part of the Medical Devices Laboratory located in an adjacent room, is well equipped with optical instruments, imaging systems, and apparatus for performing advanced flow visualization (qualitative and quantitative flow measurement, multiscale flow visualization) by using particle image velocimetry (PIV).

Medical Device Prototype Laboratory (~500 square feet) A fully equipped Prototype Machine Shop (formerly known as the Prototype Machine Shop) is located immediately adjacent to the Medical Devices laboratory. The fabricator/designer on the proposed project (Mr. Frankowski) has full prioritized access to the shop as one of its two founders.

30

Brown Laboratory

(BSP2)

The Brown Laboratory is a newly established space housed within the McGowan Institute for Regenerative Medicine. The focus of the laboratory is tissue engineering and regenerative medicine, with a focus upon the role of the host immune response to implantable biomaterials. The phenotype and function of host innate immune cells is of particular interest, and has been shown to be a predictor of the success of biomaterials based strategies for tissue reconstruction. The Brown Laboratory also participates in new biomaterials development and identification of biomaterials for clinical applications.

The Brown Laboratory is equipped for both in vitro cell culture and assessment of samples from in vivo experimentation.

Musculoskeletal Research Center (MSRC) The MSRC, which located at the Center for Bioengineering, offers diverse multidisciplinary research and educational opportunities. Graduate and undergraduate students conduct research toward their degrees in the Department of Bioengineering or any of the traditional engineering disciplines. The MSRC encourages collaboration between clinical and basic scientists in the study of the musculoskeletal system. Education is the primary goal of the MSRC. Students work with bioengineers, orthopaedic surgeons, biochemists, molecular biologists, and gene therapists, exploring innovative orthopaedic applications of basic science principles and technologies. Savio L-Y. Woo, PhD and DSc, is Director of the MSRC. Other bioengineering faculty, Dr. Steven Abramowitch, maintain their primary laboratories within MSRC.

Swanson School of Engineering Centers and Laboratories Applied Signal and System Analysis Laboratory This laboratory provides research opportunities to undergraduate and graduate students in bioengineering and related disciplines to conduct research in signal processing, systems analysis and modeling in biomedical and electrical engineering. The lab is housed in Benedum Engineering Hall and is directed by Professor Patrick Loughlin. Current research activities include the analysis and modeling of human postural control; design of vibrotactile feedback for balance; pulse propagation in dispersive media; and propagation-invariant classification of underwater sounds.

Assistive Technology Evaluation Laboratory The Assistive Technology Evaluation Laboratory is used to develop standards for assistive technology, and to test assistive devices for compliance with existing standards. This Laboratory contains a full compliment of testing equipment for wheelchair standards and limited equipment for other types of assistive devices. Laboratory personnel are actively involved in developing wheelchair standards. We currently have critical roles in the development of several national and international standards. This Laboratory also provides testing and design services to industry, consumer groups, insurance agencies and government agencies Atom Probe Field Ion Microscopy Laboratory The Atom Probe Field Ion Microscopy Laboratory is a unique, highly sophisticated research facility for investigating the structure and chemistry of solids on an atomic scale. The installation includes three units for field ion microscopy and atom probe analysis.

31

Auditory Physiology Laboratory Audiology testing related to the speech enhancement research is conducted in the Psychological and Physiological Acoustics Laboratory of the Department of Communicative Sciences and Disorders in Forbes Tower. The laboratory provides approximately 200 square feet of laboratory space and contains a sound-isolation booth, diagnostic-level audiometer, and sound generation, measurement and sound calibration equipment and a computer that is used to control the test protocol.

Automatic Data Collection Laboratory (ADC)/ Virtual Enterprise Lab Industrial Engineering’s ADC/Virtual Enterprise Laboratory is an educational and research laboratory developed under a grant from the National Science Foundation, AIMUSA, and the Swanson School of Engineering. This state-of-the-art laboratory is the most comprehensive and complete NSF funded laboratory of its kind in the United States and focuses on information systems engineering and software development. The facility is designed to aid the teaching of Automatic Data Capture concepts and tools to undergraduate and graduate engineering students. Students gain hands-on skills and perform research in such technologies as virtual enterprises, bar codes, wireless communications, speech recognition, and smart cards. They are involved in projects in areas including E-Commerce and web software development, automatic data collection for new product conformance testing, and supply chain engineering. These labs are collocated as they make use of much of the same equipment even though their research domains are distinct. Equipment includes barcode technology, magnetic stripe, RF Data Capture, machine vision and voice technology. All software operates on ten networked Pentium Computers. Some of the application software includes manufacturing execution and warehouse management, inventory management, vision and voice inspection, personnel access, barcode printing, barcode verification, magnetic strip encoding and decoding, and point of sale (POS) Control. Professor Ming-En (Alex) Wang in Industrial Engineering is the director of this laboratory.

Basic Metals Processing Research Institute (BAMPRI) The Basic Metals Processing Research Institute (BAMPRI) focuses on metallurgical research of interest to the basic metals industry, especially steels. The objectives of BAMPRI are to compensate for the reduction of in-house research & development by industry that has occurred in the past two decades. BAMPRI develops and implements the latest product and processing technology for producers, fabricators, and end-users. It also helps educate the future leaders in the metals industry by offering undergraduate and graduate level courses in the Department of Mechanical Engineering and Materials Science. Anthony J. DeArdo, Mechanical Engineering and Materials Science Professor, is director of BAMPRI. Bioengineering Design and Multimedia Laboratory The Design and Multimedia Laboratory facilitates the interaction of small interdisciplinary student teams in an effort to collaboratively solve real-world design, analysis, and prototyping problems. The lab is outfitted with a network cluster of 19 custom built PCs and peripherals all with comprehensive design capabilities, enabling students to develop paperless designs that have been analytically dissected and evaluated. In addition, students have access to an 800 square foot multimedia area where professional level presentations and technical demonstrations are developed, rehearsed, and delivered.

32

Bioengineering Instrumentation and Physiology Laboratory This laboratory was designed to accommodate small teams of students working collaboratively and is unique in that it enables students to obtain instruction in a lecture environment and directly apply that information in a hands-on laboratory setting. Students can experience experimental data collection, data processing and data analysis all in one facility. The laboratory is equipped with sixteen experimental stations. Each station can accommodate three students and is equipped cluster of 16 custom-built PCs and peripherals. All computers are running Windows 7 as the operating system. All of the computers are equipped with a National Instruments PCI-MIO-16E-4 data acquisition card that can be used with the National Instruments BNC 2090 adapter. Six of the stations utilize a Biopac Systems MP30 Adapter. The Biopac adapter provides the students with the ability to collect physiological measures and analyze the signals through several different isolated plug-in signal conditioners and amplifiers. The National Instruments Adapter allows the students to interface the PC with other instrumentation.

Bioengineering Methods and Applications Laboratory The facility enables students to participate in an undergraduate laboratory course that integrates the knowledge and skills from three core Bioengineering courses including: Biotransport Phenomena; Mechanical Principles of Biologic Systems; and Biothermodynamics. Equipment utilized in the laboratory includes an ATS 1101 Materials Testing Device, adult and pediatric blood oxygenation flow loops incorporating Biomedicus blood pumps, two ABL5 Blood Gas Analyzers, and several dialysis systems. The laboratory is designed to accommodate 24 students in a session.

Bioengineering Tissue Engineering Laboratory This facility is adjacent to the Methods and Applications Laboratory described above and provides state-of-the-art tissue engineering facilities for graduate students. Equipment in the laboratory includes a biological flow hood, incubator, centrifuge, microscopy station, and several freezers.

Bioengineering Human Movement and Balance Laboratory This research and teaching laboratory is under the direction of RakiĂŠ Cham, PhD, and Mark Redfern, PhD, and offers graduate and undergraduate students the ability to participate in a variety of whole body biomechanics research. The facility utilizes a variety of motion analysis systems, forceplate equipment and EMG units to collect kinematics, kinetics and muscle activity during various human movement experiments. An overhead support system allows for the safe collection of data during locomotion on flat and inclined surfaces. Modeling software is also available to simulate, validate and predict whole-body biomechanics.

The Motor Learning Laboratory

(Bakery Square)

This laboratory, directed by Gelsy Torres-Oviedo, PhD., offers graduate and undergraduate students the infrastructure to investigate human motor learning mechanisms during balance and locomotor behaviors. The space for this facility is 700 square footage with a state-of-the-art 14-camera motion analysis system for recording three-dimensional body kinematic data in real time. The laboratory is also equipped with an instrumented split-belt treadmill and 2 force plates flushed with the ground, allowing kinetic recordings from each foot while human subjects from all ages walk on the treadmill or over ground. The facility also has a system for electromyographic recordings and instrumentation to digitize up to 64 analogue signals. This laboratory is located in Bakery Square

33

and it is part of the Human Movement Research Laboratories, which were developed as a collaborative effort between the Department of Bioengineering and the Department of Physical Therapy. This favors the collaborations for Dr. Torres-Oviedo' research group with colleagues in the Department of Physical Therapy.

BioManufacturing and Vascular Device Laboratory This lab is directed by Dr. Youngjae Chun and its objective is to design, manufacture, and test medical devices for treating vascular diseases. Primary research focuses on improving device performance and developing more diverse biomedical applications for treating vascular diseases with a focus on novel materials and manufacturing concepts. This lab also focuses on developing novel artificial biomaterials such as fully biocompatible hybrid/composite materials made of metals, polymers, and bio-species. Facilities include in-vitro pulsatile flow circuits with vascular disease models, cell-tissue culture capabilities, and florescent microscopy with imaging system. Current research is focused on the development of (1) a novel biomaterials and biocompatible surface modification processes, (2) minimally invasive surgical solutions that include smart stent, stent graft, and guidewire, and (3) low-profile mechanical prosthetics.

Biomaterials Foundry The primary goal of this laboratory, under the direction of Yadong Wang, PhD, is to advance medicine through material innovation. We use tools from chemistry, biology, and materials science and engineering to create functional biomaterials that enable new treatments in regenerative medicine. We actively engage in 3 areas of research: 1. Coacervte-based delivery of heparin-binding proteins; 2. Cellfree in situ tissue engineering; and 3. Biomimetic nerve guide for nerve regeneration. Project 1 introduces coacervate, nm-sized oil droplet of assorted organic molecules held together by hydrophobic forces from a surrounding liquid, to controlled release of proteins. This novel approach enables highly efficacious delivery in a very small package. Project 2 uses biodegradable elastomeric scaffolds to enable in-situ regeneration of small diameter arteries without cell seeding or culturing steps. Project 3 combines micron scale contact guidance with biomimetic presentation of growth factors. The end goal of all 3 projects is clinical translation and we are actively collaborating with clinicians, basic scientists, and engineers to pursue this.

Biomedical Materials Laboratory The primary goal of this laboratory, under the direction of Yadong Wang, PhD, is to advance medicine through material innovation. We use tools from chemistry, biology, and materials science and engineering to create functional biomaterials that enable new treatments in regenerative medicine.

We actively engage in 3 areas of research: 1. Coacervte-based delivery of heparin-binding proteins; 2.

Cell-free in situ tissue engineering; and 3. Biomimetic nerve guide for nerve regeneration. Project 1 introduces coacervate, nm-sized oil droplet of assorted organic molecules held together by hydrophobic forces from a surrounding liquid, to controlled release of proteins. This novel approach enables highly efficacious delivery in a very small package. Project 2 uses biodegradable elastomeric scaffolds to enable in-situ regeneration of small diameter arteries without cell seeding or culturing steps. Project 3 combines micron scale contact guidance with biomimetic presentation of growth factors. The end goal of all 3 projects is clinical translation and we are actively collaborating with clinicians, basic scientists, and engineers to pursue this.

34

Bio Tissues and Complex Fluids Laboratory The Bio Tissues and Complex Fluids Laboratory is devoted to the characterization and experimental study of complex materials. Much of the work in this laboratory focuses on understanding and quantifying the link between material behavior and structure. These results are used for the development of constitutive equations to model these materials in a predictive fashion. A second focus of the laboratory is the study of the motion and stability of particles in viscous and viscoelastic fluids.

Bio Transport Laboratory This laboratory is under the direction of Jack Patzer, PhD, and focuses on research related to the application of Biothermodynamics and Biotransport Phenomena (principles of heat, momentum, and mass transport) to understanding the properties of physiological systems, medical devices, and bioreactor engineering. Current investigations involve the application bound solute dialysis (BSD) as a detoxification approach to support patients with liver failure, use of ischemia protective polymers (IPP) to mitigate ischemia/reperfusion injury in organ harvest and transplant, and wound perfusion/skin regeneration for patients with severe burns. Major equipment includes a Sun workstation for finite element analysis fluid dynamics, spectrophotometers for colorimetric composition analysis, plate reader for colorimetric composition analysis, blood-gas analyzer, table-top refrigerated centrifuge, cell incubators, and Prisma dialysis machines. Other equipment includes multiple roller pumps, gas mass flow controllers, oscilloscope, electrochemistry controllers and analyzers.

Cardiovascular Systems Laboratory This laboratory is under the direction of Sanjeev Shroff, PhD and focuses on research related to cardiovascular mechano-energetics and structure-function relationships. This research utilizes a variety of biophysical, cell and molecular biology, biochemistry, and imaging techniques. The facility has: 1) setups for biophysical measurements at isolated heart, isolated muscle, and single cell levels (mechanics and intracellular calcium transients), 2) a cell-culture room (incubator, laminar flow hood, centrifuge, microscope), and 3) a wet lab which has equipment necessary to do protein biochemistry and molecular biology research.

Cell and Molecular Biophysics Laboratory This research laboratory is under the direction of Hai Lin, PhD and offers graduate and undergraduate students the ability to participate in research related to Cellular and Molecular Biophysics. The research of this lab focuses on the structure, function, and interactions of individual biological macromolecules at the cellular and molecular levels with a multimodal approach, using the Atomic Force Microscope (AFM) combined with cell biology and electrophysiological techniques.

The facility has 1) an atomic force microscope and an fluorescence microscope (Olympus IX70), which can be integrated to carry out simultaneous nanometer resolution AFM imaging and optical fluorescence imaging; 2) a cell-culture room that is equipped with tissue culture incubators, laminar flow hood, centrifuge and a microscope, 3) a wet lab which has equipment necessary to for biochemistry and molecular biology research. There is also an adjacent core cellular and molecular facility that is equipped with a gel-imaging station, spectrophotometer, high speed centrifuge, ultracentrifuge, -80o C freezer, environmental shaker and incubator for microbiological research, a cold room, sterilizer and labware washer.

35

Cell Migration Laboratory This research laboratory is under the direction of Partha Roy, PhD and offers graduate and undergraduate students the ability to participate in research related to molecular mechanisms of cell migration with emphasis in tumor metastasis. This research utilizes a variety of cell biology, molecular biology, biochemistry and imaging techniques. The facility has: 1) a cell-culture room that is equipped with tissue culture incubators, laminar flow hood, centrifuge and a microscope, 2) a wet lab which has equipment necessary to do protein biochemistry and molecular biology research, and 3) a microscopy room that houses an IX-71 Olympus research grade inverted microscope and image acquisition system.

Center for Complex Engineered Multifunctional Materials (CCEMM) This Kumta research laboratory and Center for Complex Engineered Multifunctional Materials (CCEMM), directed by Prashant N. Kumta, PhD, offers graduate and undergraduate students to participate in variety of applied biomaterials research fields for tissue regeneration. Some of the current research activities include (i). Bio-functionalization and degradation of carbon nano-tubes for tissue engineering applications, (ii). Responsive biosensors for implants, (iii). Development of novel biodegradable and biocompatible metallic implants for craniofacial and orthopedic application, (iv).

Nano-structured calcium phosphate based bone cements for bone regeneration process, (v). Calcium phosphate nano-particles for targeted gene delivery, (vi). Biocompatible and degradable polymers and calcium phosphate-polymer composites for controlled delivery systems of proteins, peptides, drugs and gene. (vii). Functional inorganic-organic and metal-organic coatings for tissue regeneration. The lab has state of the art biomaterials syntheses and processing capabilities and is equipped with wide variety of materials characterization tools (e.g. X-ray Diffractometer, Fourier Transformed Infrared Spectrophotometer, Specific Surface Area Analyzer, Mercury Porosimeter, Helium Pycnometer, Inductively Coupled Plasma-Atomic Absorbance Spectrometer, Apparent-Tap Density Analyzer, electrochemical potentiostats, etc.). This lab also has cell culture rooms equipped with biosafety cabinets, incubators, centrifuges, fluorescence microscope, optical plate reader, and atomic force microscopy.

Center for Energy The Center for Energy at the University of Pittsburgh is dedicated to improving energy technology and sustainability, with particular emphasis on energy efficiency and reliability, advanced materials for demanding energy technologies, and energy diversification. These areas of research focus, coupled with associated educational initiatives and regional industrial collaborations, make the Center for Energy unique among other university energy centers in the USA. As a University-wide endeavor, the Center for Energy leverages the energy-related expertise of more than 40 faculty members from multiple disciplines, including chemical engineering, chemistry, civil engineering, electrical engineering, industrial engineering, geology, mechanical engineering, and materials science. Indeed, the Center serves to promote and facilitate multi-disciplinary research collaborations concerned with resolving the world’s current and future energy-related challenges. A major goal and defining characteristic of the Center is to work closely with the concentration of energy-related companies in this region and from around the globe. To that end, the Center acts as an easily accessible entry point for industry in identifying energy-related research expertise, form collaborations, and participate in research at the University.

Center for Industry Studies The Center for Industry Studies supports multidisciplinary research that helps link scholars to some of the most important and challenging problems faced by modern industry in the highly

36

competitive global marketplace. Our activities and programs are motivated by the firm conviction that bringing engineers and social scientists together for research collaboration can lead to important advances in scholarship and produce research of significant practical value to industry. In building this community of scholars, the Center reaches out to faculty members from all of the social science disciplines and professional schools for research collaboration opportunities with faculty members in the Swanson School of Engineering. The Center also encourages communication between scholars and industry practitioners as a means of building partnerships that can enhance the impact of academic research, yield educational opportunities, and promote economic development.

The Center for Simulation and Modeling The Center for Simulation and Modeling (SAM) was established in October, 2008 as a University-wide effort with major contributions from the Swanson School of Engineering, the Faculty of Arts and Sciences, and Health Sciences. SAM (www.sam.pitt.edu) grew out of the Center for Molecular and Materials Simulation (CMMS), augmenting the original mission of CMMS to go beyond providing computing hardware to establishing a center that provides support for high performance computing at all levels. SAM is dedicated to supporting and facilitating computationalbased research across campus. Faculty across the University are using modeling and simulation to further their research. SAM serves as a catalyst for multidisciplinary collaborations among professors, sponsors modeling-focused seminars, teaches graduate-level modeling courses, and provides individual consultation in modeling to all researchers at the University. Professors J. Karl Johnson (ChE) and Kenneth D. Jordan (Chem) are co-directors of SAM, Michael Barmada of the Departments of Human Genetics and Biomedical Informatics serves as Associate Director, and Antonio Ferreira of the Departments of Chemistry and Computational & Systems Biology serves as the Executive Director.

There are more than 50 faculty associated with SAM using simulation and modeling at the University.

They come from a wide range of disciplines, including astronomy, biology, chemistry, economics, engineering, health, and medicine. Areas of research include: energy and sustainability, nanoscience and materials engineering, medicine and biology, and economics and the social sciences.

Computational resources are available through SAM, which has a full-time technical director and several consultants who assist users with installation and parallelization of software. SAM provides in house high-performance computing (HPC) resources allocated for shared use for campus researchers.

The systems are housed in the University’s Computing Services and Systems Development (CSSD) data center and are administered and maintained jointly with CSSD. The cluster compute nodes were purchased with funds provided by the University and by faculty researchers.

Current hardware Configuration • 23 quad-socket 12-core AMD Magny Cours (6172) 2.1 GHz CPU (48 core) nodes. 2 nodes have 256 GB, 18 have 128 GB, and 3 have 64 GB of memory.

• 44 dual-socket 6-core Intel Westmere (X5650) 2.67 GHz CPU (12 core) nodes and 48 GB of memory.

• 110 dual-socket 4-core Intel Nehalem CPU (2.93 GHz X5570, 2.67 GHz X5550, and 2.27 GHz L5520) nodes (8 core). 8 have 48 GB, 56 have 12 GB and 46 have 24 GB. • 16 NVIDIA Tesla C2050 GPGPUs (1.15 GHz) each with 448 cores and 2 GB of memory.

These are distributed across 4 dual-socket 6-core Intel Westmere (X5650) nodes.

• 1 single-socket 8-core Intel Sandy Bridge (E5-2643) node. This node has 3 TB of SSD local scratch and 128 GB of RAM. •

37

•

•

• • •

82 dual-socket 8-core Intel Sandy Bridge (E5-2670) 2.6 GHz nodes. 36 have 32 GB of RAM and 1 TB of local disk connected by Infiniband. 36 have 64 GB of RAM and 1 TB of local disk connected by Infiniband. 8 have 64 GB of RAM and 2 TB of local disk connected by GigE. 2 have 128 GB of RAM and 3 TB of local disk connected by InfiniBand.

54 quad-socket 16-core AMD Interlagos (Opteron 6276) 2.3 GHz nodes. 18 nodes have 256 GB of RAM. The remaining 36 nodes have 128 GB of RAM. All nodes are connected by QDR Infiniband and have 2 TB of local scratch.

24 NVIDIA GTX Titan GPGPUs (837 MHz) each with 2688 cores and 6 GB of memory.

24 dual-socket 8-core Intel Sandy Bridge (E5-2650) 2.6 GHz nodes with 128 GB of memory, 1TB of local scratch, and FDR InfiniBand interconnect.

20 dual-socket 8-core Intel Ivy Bridge (E5-2650v2) 2.6 GHz nodes with 64 GB of memory, 1 TB of local scratch, and FDR InfiniBand interconnect.

The nodes are clustered via a fast Infiniband low latency network fabric in order to enable efficient distributed parallel runs. The infrastructure is designed for future scaling via additional resources funded by national instrumentation grants, internal University funds, or faculty contributions from grants or start-up funds. The system is housed at the enterprise level, state-of-the-art facilities provided by the University's Network Operations Center, and it is connected with the rest of the campus via a high-bandwith fiber-optical gigabit network.

Center for National Preparedness The Center for National Preparedness (CNP) was established in the wake of the September 11 terrorist attacks to develop holistic and logical approaches to education, research, and training on issues related to national preparedness. CNP has been formulated around four primary guiding principles for Homeland Security: prevention, protection, response, and recovery. Prevention requires effective diplomatic policies, border security, and surveillance systems, which must be a first priority prior to catastrophic events. Protection provides the assurance of military vigilance, the health of the American population, the security of critical infrastructure, and the continued operation of cyber networks. Response focuses on employing properly trained and equipped professionals at the local, state, and federal levels. Recovery emphasizes the importance of rapid restoration of key components within critical infrastructure. CNP is uniquely positioned to use this multi-layered approach to provide expertise to organizations that must deal with homeland preparedness. CNP is a broad, multidisciplinary, collaborative enterprise that engages the University’s scientists, engineers, policy experts, and clinical faculty. Members of CNP possess expertise in biomedical research, public health, medicine, national security policy, engineering, and information technology. The unifying theme of our efforts is the application of systems (and systems of systems) approaches from the engineering sciences to a new academic discipline of Homeland Security and National Preparedness Studies.

Center for Sustainable Transportation Infrastructure Over the past several years, the Department of Civil and Environmental Engineering (CEE) has strategically positioned itself to focus its research and educational efforts on the transportation sector. The Center for Sustainable Transportation Infrastructure (CSTI) was formed to expand on the successful research and education collaboration between the Pennsylvania Department of Transportation (PennDOT) and the CEE Department. PennDOT and the University of Pittsburgh formalized their relationship through an Intergovernmental Agreement, which provides a mechanism to support CSTI activities with up to $25 million dollars over five years. CSTI’s vision is to advance the

38

state of transportation infrastructure through collaborative, multi-disciplinary research and education efforts and dissemination of new technologies and knowledge. CSTI is interested in fostering collaborative transportation research throughout the Swanson School of Engineering, the University, industry, and other academic institutions to expand its research program.

Ceramics Processing Laboratory The Ceramics Processing laboratory includes glove box facilities for chemical synthesis of powders and thin films. Powder preparation facilities allow for mixing and milling of powders, Horiba CAPA-300 particle size analyzer, Quantachrome BET surface area analysis, mini spray drier, Brookfield viscometer, uniaxial press and colloidal filtration pressurization unit, cold isostatic press.

Firing facilities include a high-temperature sintering dilatometer and various tube and box furnaces for firing ceramics and melting glass at temperatures up to 1700°C in air.

Chemical Engineering Process Simulation Laboratory The Chemical Engineering Process Simulation Laboratory brings to the Department the full complement of commercial design software that is used throughout the world by practicing chemical engineers. Students use software systems including AspenPlus, BJAC, Emission Master, BatchFrac, and the Icarus Process Evaluator to blend their technical skills with applied designs. This marriage of theory and practice at a level used by practicing engineers has significantly enhanced the ability of the Department’s graduates to quickly contribute in a professional setting. The Process Simulation Laboratory is located in B72A Benedum Hall. It serves as a teaching lab and as a study area for the students using the simulation software.

Cluster Computing Laboratory The Cluster Computing Laboratory is dedicated to the development of new architectures that utilize commodity personal computers as the processing/storage nodes. More efficient computer communication and coordination is facilitated through a high-speed, intelligent network. Equipment includes a cluster of 16 Pentium III computers, a cluster of 8 Pentium computers, a surface-mount soldering station for custom hardware development, and a number of development workstations.

Mentor Graphics has donated over $2M worth of hardware development software for this Laboratory and for the teaching laboratories in the Computer Engineering Program.

Composite Materials Laboratory The Composite Materials Laboratory research focus is in penetration and fracture mechanics of composite materials, the characterization of associated dynamic failure modes, and understanding of the physics of dynamic failures of new generation of composite materials.

Recent new generation of material designed and under investigation includes a TaC/CNTs/SiC cermic matrix composite, a potentially high temperature performance structural composites that is light weight, and possesses good toughness, thermal shock resistance and good energy absorption capacity. Fracture toughness measurement for the TaC/CNTs/SiC CMCs is being carried out by the three point flexure test, with SEM employed to observe the deformation phenomena and detect the fracture toughening behavior. The penetration Split Hopkinson Pressure Bar (P-SHPB) is used to carry out the low velocity high strain rate dynamic impact test of this new material. In terms of the failure or fracture in the ceramic composites, the perforation is characterized by matrix crack, fiber crack and plug push out. Problems investigated include the effect of CNTs reinforcement and loading condition on the compressive strength of the composites, and understanding the energy absorption mechanism and the wave propagation phenomenon which

39

causes the composite plate damage and characterizes the damage mode. The lab is equipped with a high-performance penetrating and fracturing Split Hopkinson Pressure Bar (SHPB) integrated to a high speed optical/CCD imaging system for high strain rate testing. The system is capable of capturing dynamic fracture, crack propagation, and fragmentation processes during composite materials failure at over 2 million frames per second. Laser Raman spectroscopy is used to directly measure fiber stress at the microscopic level because Raman frequencies or unique atomic vibrational energy levels of the constituent fibers are stress-strain dependent.

Computational Biomechanics Laboratory Spandan Maiti directs this laboratory located at the Center for Bioengineering and provides graduate and undergraduate students the opportunity to conduct computational biomechanics research.

Computational models for complex constitutive and failure behavior of native and engineered tissues are developed in this lab. Theories from applied mathematics, numerical algorithm and computational science are utilized to develop simulation software that examine the mechanical behavior of these tissues in a multiphysics environment. The lab is equipped with a number of state of the art 12 core Mac Pro workstations in a parallel environment.

Computational Nanomechanics Lab The Computational Nanomechanics Lab focuses on investigating the mechanics of materials at the nanoscale using large-scale computer simulations. Current research projects include 1) Thermomechanical behavior of carbon nanotube based and nano-bio materials, 2) Atomistic-tocontinuum themomechanical theory in solids, and 3) Multiscale method development. The computational tools the lab employs include molecular dynamics simulations, first-principles methods, Monte Carlo simulations, and finite element/meshfree methods. The computational resources the Lab has access to include a brand new 800-core cluster (shared with other research groups at Pitt) and a 24core cluster. This 800-core cluster has 100 nodes each with two quad-core Intel Nehalem CPUs. The computer nodes are connected via a high speed Infiniband network, which will deliver exceptional performance for parallel calculations using large numbers of CPUs. The 24-core cluster consists of 4 x 6-Core Intel Xeon E7450 processors with 12GB of memory. The cluster has SUSE Linux Enterprise Server 10 installed along with MPICH, MPICH2 and Intel compiler ICC and IFC version 10.1 with Math Kernel Library 10.0.1.014. The lab also has several brand-new desktop computers, each having an Intel quadcore processor. The computers are well-equipped and are fully integrated into the University of Pittsburgh high-speed network. In addition, the lab has access to the state-of-the-art computing facilities at the Pittsburgh Supercomputing Center (www.psc.edu).

Computational Optimization Laboratory The Computational Optimization Laboratory contains state-of-the-art computing facilities including several optimization software packages. The laboratory is used for applied research thrusts as well as course instruction. Techniques employed include linear and mixed-integer programming, network flows, nonlinear programming, stochastic programming, Markov decision processes, and heuristic optimization. The applications include medical decision making, facility layout, energy modeling, supply chain management and scheduling. The goals of this laboratory include applying optimization techniques to industrial problems, developing new algorithms for solving speciallystructured problems, and teaching at the undergraduate and graduate levels.

40

Computational Transport Phenomena Laboratory The primary objective of the Computational Transport Phenomena Laboratory is to conduct theoretical research in fluid mechanics, combustion, heat and mass transfer, applied mathematics, and numerical methods. The emphasis of current research in this laboratory is on “understanding physics” rather than “developing numerical algorithms.”

Several areas of current investigations are turbulent mixing, chemically reacting flows, highspeed combustion and propulsion, transition and turbulence, nano-scale heat transfer, magnetohydrodynamics, and plasma physics. The numerical methodologies in use consist of spectral methods (collocation, Galerkin), variety of finite difference, finite volume and finite element schemes, Lagrangian methods, and many hybrid methods such as spectral-finite element and spectral-finite difference schemes.

The laboratory is equipped with high-speed mini-supercomputers, graphic systems, and stateof-the-art hardware and software for "flow visualization." Most computations require the use of off-site supercomputers (mostly parallel platforms), for which high-speed links are available.

Computer Aided Design/Computer Aided Software Engineering Classroom-Laboratory This state-of-the-art laboratory is used to support the teaching and research program in Computer Engineering and Electrical Engineering. Specifically, the laboratory combines a lecture facility together with high performance UNIX workstations each having dual quad-core processors and 8GB memory. Software includes design tools from Cadence Design Systems, Synopsys, Mentor Graphics, ARM, Xilinx, and Forte Design Systems. This facility is used by the students and faculty in the courses on VLSI design, System on a Chip Design, Digital System Verification, and Hardware Design Methodologies. This laboratory contains the hardware and software necessary to provide for the analysis and simulation of both course projects and advanced research digital systems designs.

Examples include new proposed Internet security solutions, experimental wireless ad hoc networks and configurations, and schemes for the management of networked systems. The laboratory also provides for the development of CAD design tools and the integration of these tools to support industrial strength design flows. Finally, this facility supports the many System-on-a-Chip and Mixed Technology Micro-systems research projects currently in process in the school by providing the platform for high performance CAD software tools.

Computer Aided Manufacturing and Automation Laboratory The Computer Aided Manufacturing and Automation Laboratory is a comprehensive teaching and instructional laboratory with the following equipment: • • • • • • • • •

an Adept SCARA robot with six-axes movement an American AARM robot with motion controller three table top teaching six-axes robots four programmable logic controller (PLC) workstations a mini-manufacturing cell with part identification capability a computer-controlled flow line for physical simulation part-identification equipment including a laser scanner a video digitizer with a frame grabber an optical text scanner

41

Computer Architecture Laboratory The Computer Architecture Laboratory in Electrical and Computer Engineering is a research laboratory devised to investigate advanced computer microarchitectures, computer system architecture, power/thermal management in computer systems, multi-core microprocessors, memory systems, emerging memory technologies, interconnection networks, 3D integration and hardware security. The lab is equipped with networked high-end multi-processor Linux servers, over 10TB mass network storage and solid state drivers, testing motherboards, and more than a dozen Windows and Linux workstations. The laboratory software consists of state-of-the-art simulation tools from both public domains and in-house developed simulation warehouse. The laboratory is sponsored by NSF, SSOE, and Intel Corporation.

Computer Lab for Innovation and Productivity (CLIP) The Computer Laboratory for Innovation and Productivity (CLIP) is a state-of-the-art laboratory that provides IE students access to state-of-the-art industrial engineering software. It allows them to work on projects and enable them to succeed and excel when they join the global workforce.

In addition to general University and School software, the lab offers Computer Aided Design, Database, and Productivity Analysis software to students. The Lab mirrors the Holzman Learning Center and allows students to work off-hours on homework and projects.

Computer Vision and Pattern Recognition The Laboratory for Computer Vision and Pattern Recognition in the Department of Electrical and Computer Engineering supports research in computer vision, pattern recognition and machine learning, image processing, and multimedia information processing. Special research interests include applications of wavelet transforms, image/video compression, artificial neural networks and nonlinear support vector machines. The Laboratory is equipped with PC-based image processing and pattern recognition workstations with associated cameras.

Design Studios Industrial Engineering’s Design Studios, provides students with computer facilities that are available 24 hours a day with computers and printers and with full Internet and e-mail access. The lab provides high-speed PC hardware and provides general University and School software and includes specialized Industrial Engineering software. The laboratory and its equipment are available to senior students participating in research projects and graduate students participating in research projects in the areas of computational intelligence and operations research.

Electric Machinery Laboratory The Electric Machinery Laboratory provides horsepower range universal motor-generator sets for student electric machinery experiments. A series of seven experiments are used to complement the theory of electric machines taught in parallel. After an initial 3-phase transformer experiment to introduce 3-phase instrumentation and laboratory safety, students in groups of three connect and record data on their own universal machines. The first machine experiment is to measure the torque-angle curves for a synchronous generator motor driven by a shunt dc motor. Induction motor experiments

42

follow, then lastly, shunt and series dc machine tests. The final experiment is paralleling and loadsharing of synchronous generators with the Laboratory ‘infinite bus’.

Energy Systems Laboratory The purpose of the Energy Systems Lab at the University of Pittsburgh is to investigate the multi-scale thermal-fluid behavior encountered during the conversion and use of energy. The laboratory includes a National Instruments DAQPad-6020E multifunction I/O device for USB connected to an SCXI system with multiple thermocouple, voltage, and current terminal blocks, an Omega Engineering OMB-DAQ-55 data acquisition module, fine-gauge thermocouples with low noise connectors and electric ice points, Omega FP-5070 mini-flow sensors, millivolt pressure transducers with full bridge design, heat flux sensors, digital meters, high accuracy rotameters, a Sony DCR-TRV900 3 CCD digital video camera with frame-grabbing and streaming video cards, a Leitz Epivert modular inverted microscope with swappable high-precision objectives, and a number of computer workstations.

The Environmental Engineering Laboratory The Environmental Engineering Laboratory provides research and analytical capabilities in environmental science and engineering for wastewater treatment, water resource protection and development, industrial waste, toxic and hazardous waste management, and environmental impact assessment remedial action. The facility consists of about 10,000 square feet of space, divided into individual laboratories which contain equipment for standard chemical, microbiological and instrumental analyses including: An On-Line Standford Research System QMS-100 Mass Spectrometer; Hewlett Packard 5890 Series-II Gas Chromatograph interfaced with 5971A Mass Selective Detector; Hewlett Packard 5890 Series-II Gas Chromatograph interfaced with Tekmar LSC2000 Purge-and-Trap Unit, OI Electrolytic Conductivity Detector, and Photo Ionization Detector; Hewlett Packard 5890 Series-II Gas Chromatograph interfaced with Flame Photometric Detector and Flame Ionization Detectors; Hewlett Packard 5890 Series-I Gas Chromatograph with Electron Captured Detector; Perkin Elmer AutoSystem-XL Gas Chromatograph with Flame Ionization Detector; Perkin Elmer 8500 Gas Chromatograph with Thermal Conductivity Detector; Dionex 4500i Ion Chromatograph with Conductivity Detector; Perkin Elmer 4100-ZL Graphite Furnace Atomic Absorption Spectrophotometer; CEM Microwave Digester, Perkin Elmer 1100-B Direct Flame Atomic Absorption Spectrophotometer; Perkin Elmer 403 Atomic Absorption Spectrophotometer with MHS-10 Mercury Hydride Generator; Perkin Elmer Lambda-2 UV/Visible Spectrophotometer; Perkin Elmer TGA-7 Thermographic Analyzer; Ionics 1555-B Carbon Analyzer; Coulter MultisizerII Particle Counter; N-CON WB-512 COMPUT-OX Respirometer; Parr 1266 Bomb Calorimeter; Landfill Reactors; Azur Microtox-500 Bioassay Analyzer; Leco SC-132 Sulfur Analyzer; Hach 2100-A Turbidimeter; OREC 03B1-0 Ozon Generator; Pulsar Rip-Tide-500 UV Water Treatment System; Bench Scale EXEKIA Membralox 1T1-70 Cross Flow Membrane Filtration Unit; Corvall RT-6000B Refrigerated Centrifuge; International IEC-K Ultra Centrifuge; Fisher 228 Centrifuge; Buchi 323 Distillation Unit; Metrohm 702-SM Titrino Automatic Titrator; Phipps & Bird 300 Paddle Stirrer; Eberbach 6000 Table Shaker; Burrell 75 Wrist Shaker; Fisher Vortex Genie-2 Mixer; Fisher 12-561-3-FAZ Microscopes; Quebec Colony Counter; Bausch & Lomb 20 Spectrophotometers; Hach Digesters; Ion-Analyzers; pH-meters; Dissolve Oxygen Probes; Incubators; Branson 5200 Ultrasonic Bath; Water-baths; Magnetic Stirrers; Ovens; Hot-plates, Mettler AE-163 and AE-50 Analytical Balances; Allied Fisher 8240-DA Digital Balance, several portable balances, and research grade glassware and supplies.

43

Fluids Mechanics Laboratory The Fluids Laboratory is the center for experimental research in fluid mechanics and rheology at the University of Pittsburgh. Much of the research in this laboratory examines the behavior complex fluids, such as polymeric solutions, suspensions, and biological fluids in processing-like flows. Laboratory work focuses on the understanding of the link between flow behavior and the material properties so that materials can be processed more efficiently to yield the desired characteristics. In obtaining this goal, this laboratory develops and applies many cutting-edge technologies to obtain precise, in situ measurements of fluid velocity, stress, pressure, and temperature. These measurements are compared with direct numerical simulations to model, understand, and predict the flow behavior.

Gas Turbine Heat Transfer Laboratory The Gas Turbine Heat Transfer Laboratory is equipped with advanced flow and heat transfer measurement facilities directed toward obtaining fundamental understanding and design strategies of airfoil cooling in advanced gas turbine engines.

Major experimental systems available include a particle imaging velocimetry, a computerautomated liquid crystal thermographic system, a UV-induced phosphor fluorescent thermometric imaging system, and a sublimation-based heat-mass analogous system. Specific projects currently under way include optimal endwall cooling, shaped-hole film cooling, innovative turbulator heat transfer enhancement, advanced concepts in trailing edge cooling, and instrumentation developments for unsteady thermal and pressure sensing.

George A. Davidson, Jr. Unit Operations Laboratory The Department’s Unit Operations Laboratory was renamed to reflect the support of George A. Davidson, Jr. in implementing a five-year development effort to enhance the existing Unit Operations Laboratory. This development effort provided an opportunity for our students to develop laboratory and process design skills and solve a multitude of design problems using state-of-the-art apparatus and instrumentation. In 2009-2010, the Unit Operations Laboratory located in room SB33 was completely renovated as part of Swanson School’s Benedum Hall Transformation Plan.

Geotechnical Engineering Laboratory The Geotechnical Engineering laboratory, which is computer controlled, includes static triaxial and direct shear apparatuses for both soils and rocks, a ring shear apparatus, a gyratory compactor, a dynamic triaxial apparatus, consolidometers, constant and variable head permeameters, a resonant column apparatus, an ultrasonic velocity testing apparatus, and a shaking table. In addition the laboratory houses standard equipment for Atterberg Limits determination, and grain size analysis.

Human Engineering Research Laboratories (HERL) The Human Engineering Research Laboratories (HERL) is a joint effort between the University of Pittsburgh, UPMC Health System, and the VA Pittsburgh Healthcare System.

HERL occupies approximately 20,000 square feet of laboratory and office space. Under the direction of HERL Founder and Director, Rory Cooper, PhD, and Michael Boninger, MD, HERL Medical Director and Director of the newly established University of Pittsburgh Model Center on

44

Spinal Cord Injury (UPCM-CI), HERL is dedicated to wheelchair and mobility research, specifically the biomechanics of wheelchair use and upper extremity pain that can result from years of manual wheelchair propulsion. The laboratory, which was designated as a Center of Excellence for Wheelchair and Related Technology, also studies the effects of force and vibration on a wheelchair user’s “ride comfort.” HERL is the only wheelchair-testing laboratory outside the private sector. HERL is the home for the VA Rehabilitation Research and Development Center for Wheelchairs and Related Technology, and a NIDRR Model Systems Center for Spinal Cord Injury. In addition, HERL is a partner in the NIDRR Rehabilitation Engineering Research Center for Wheelchair and Seating, and Rehabilitation Engineering Research Center on Telerehabilitation.

Human Factors Engineering (HFE) The Human Factors Engineering (HFE) Laboratory is a team-based teaching and research laboratory for undergraduate and graduate students. The laboratory focuses on cognitive, ergonomic, and environmental aspects of human factors, and their influence on productivity and quality. The lab has a wide array of hardware and software to include Ergomaster for conducting ergonomic studies, Discovery Machine virtual reality software for teaching energy isolation, as well as Minitab, SPSS and NVivo7 for data analysis.

Innovative Medical Engineering Developments (iMED) – www.imedlab.org The iMED lab was founded in 2011 and its vision is to become an international leader in dynamical biomarkers indicative of age- and disease-related changes and their contributions to functional decline under normal and pathological conditions. In particular, the mission of the lab is to develop clinically relevant solutions by fostering innovation in computational approaches and instrumentation that can be translated to bedside care. Given the vision and mission behind the lab, our motto is: "Output and outcome." These two simple words fully describe the essence of the lab.

"Output" describes the first goal of the iMED lab: to conduct rigorous scientific investigations whose results will be published in respected high impact journals. In order to achieve this goal, we strive to conduct cutting-edge research projects which produce results with an immediate impact. "Outcome" describes the second goal of the iMED lab: to conduct research projects that matter to patients and the public. In other words, our research must make a difference in people's lives. The research conducted in the iMED lab must lead to important and real-life relevant advances in biomedical computational approaches and instrumentation. The iMED lab serves as a unique, clinically oriented training ground for undergraduate students, graduate students and post-doctoral fellows interested in computational tools and instrumentation. We work very closely alongside numerous health and allied health professionals and scientists, including physicians, occupational therapists, physical therapists, speech language pathologists, throughout all stages of research, from problem formulation to grant application, from data collection to journal publication.

Intelligent Control Laboratory (ICL) The general research interests of the Intelligent Control Laboratory (ICL) include (i) developing advanced control methods inspired by neural control principles and (ii) studying the human neural system using techniques from control theory and information theory. The ICL is also devoted to the application of intelligent control technology in design and optimization of electric power systems, transportation systems, and economic systems. Currently, the lab is equipped with the following major devices: (i) CyberGlove, a data glove for capturing hand movement. It has 22 sensors that can measure angles at all the finger joints of the right hand. (ii) GWS Mini Dragonfly, a remotely controlled, electronically powered helicopter. (iii) Polhemus' Fastrack, a 3 dimensional motion-tracking device

45

with 4 signal channels. Each channel computes the position and orientation of a small receiver as it moves through space. (iv) Delsys EMG machine (Bagnoli 8), an electromyogram device with 8 single differential surface electrodes. (v) Four workstations.

Joint Replacement Biomechanics Laboratory The Joint Replacement Biomechanics Laboratory focuses on the improvement of both the life span of joint replacements and the design of the components used in joint replacement. The laboratory is equipped for computational and experimental analyses.

John A. Jurenko Computer Architecture Laboratory This laboratory in the Department of Electrical and Computer Engineering provides the hardware and software necessary for students to design and build digital circuits. It is used in two undergraduate laboratory courses where students are provided with an understanding of the three-way relationship between the mathematical abstraction of logic as expressed in Boolean algebra, schematics and simulations using CAD tools, and the physical realization of these circuits in hardware. The facility contains 24 networked high-performance workstations, complete with logic analyzers, oscilloscopes, and related equipment used to design, breadboard, and test digital circuits. In addition, the laboratory contains complete support for both Altera and Xilinx Field Programmable Gate Array system development. Finally, a full complement of software, including the Mentor Graphics Design Tools and the Microsoft Visual Studio, is available which allows students to simulate their designs and develop new hardware and software systems.

This laboratory was created through a generous gift from John A. Jurenko, a Pitt alumnus and friend of the University.

W.M. Keck Rapid Prototyping and Reverse Engineering Laboratory The Departments of Bioengineering and Industrial Engineering have joined efforts in the creation of a state-of-the-art laboratory that provides students with a unique hands-on experiences in the development and production of functional prototypes through the utilization of leading-edge rapid prototyping and reverse engineering technologies including stereolithography, fused deposition modeling, 3-dimensional printing, and laser scanning. Engineering students are given the opportunity to bring new designs and redesigns to reality through the utilization of leading-edge rapid prototyping and reverse engineering hardware and software.

Keystone Mixed-Technology Microsystems Design Laboratory The Keystone Mixed-Technology Microsystems Design Laboratory is used for the investigation of computer-aided design, simulation, and testing techniques associated with the design and analysis of very large-scale integrated circuits (VLSI) and research on computer-aided design of mixed technology micro and nano scale systems such as optical mechanical electrical micro-systems (OMEMS) and optoelectronic integrated circuits (OEICs). The laboratory equipment consists of a network of a dozen Linux and Windows desktop workstations with access to a compute cluster of 16 multi-core nodes. In addition to access to the commercial tools hosted by the department servers, a number of university based tools and other utilities have been developed and maintained in-house.

46

The Kresge Rapid Manufacturing Laboratory The Department of Bioengineering has teamed with the Department of Industrial Engineering to further extend the laboratory capabilities in the School of Engineering to include Rapid Manufacturing technology. In a joint effort, the departments secured a $500,000 grant from the Kresge Foundation for the development of the Kresge Rapid Manufacturing Laboratory. This laboratory will enable students to take a prototype to the production stage by manufacturing small batches of fully functional products. The technologies included in the new facility will complement the existing laboratories and will include: Plastic Injection Molding, CNC, Vacuum Casting, and Materials Testing.

Laboratory for Advanced Materials at Pittsburgh (LAMP) The Laboratory for Advanced Materials at Pittsburgh (LAMP) under the direction of Professor Paul W. Leu, focuses on designing and understanding advanced materials by computational modeling and experimental research. Simulations and experiments are used in a synergistic manner to study the mechanical and electronic properties of nanomaterials and surfaces for various applications. Facilities include chemical vapor deposition tube furnace for nanotube synthesis and nanowire synthesis. Current research is focused on transparent conductors and solar cells.

Laser and Opto-Electronics Laboratories In the Laser and Opto-Electronics Laboratories facilities exist for research in nonlinear optics, materials, and devices. As part of the Department of Electrical Engineering, these laboratories emphasize . Facilities for maskmaking, lithography, dry-etching, evaporation and sputtering of metals or insulators, diffusion alloying, and wire-bonding are available. The structural and electrical characteristics of fabricated material and devices are evaluated using state-of-the-art test equipment.

Semiconductor devices can be characterized at low temperatures in a continuous flow cryostat, capable of reaching temperatures as low as 5 degrees Kelvin. These laboratories contain argon, Nd:YAG (frequency doubled and tripled), carbon dioxide and Ti:sapphire lasers.

Manufacturing Assistance Center (MAC) The MAC is a working factory opened in November of 1994 at the University of Pittsburgh Applied Research Center (U-PARC) as an initiative of the University of Pittsburgh, School of Engineering’s Industrial Engineering Department. It is comprised of a synergistic network of laboratories encompassing machine tooling, computer aided design and manufacturing, metrology, materials tracking, and human issues. The MAC’s mission is twofold: 1.) provide research and educational support to the University of Pittsburgh and 2.) provide Southwestern Pennsylvania small and mid-sized manufacturers with the tools necessary to compete in the global marketplace. With the resources available in the MAC labs, area manufacturers can receive demonstrations on new equipment and manufacturing processes, perform pilot manufacturing, and conduct limited production. In addition to these services, the MAC also provides training on computer numerical control (CNC) machining, computer aided design (CAD), computer aided manufacturing (CAM), and computer integrated manufacturing (CIM), plus a variety of other concepts (e.g. materials requirements planning, total quality management, team development, etc.) utilized in today’s highly successful manufacturing organizations. David I. Cleland, Professor in Industrial Engineering, is the Co-Director of the MAC, along with Dr. Bopaya Bidanda.

47

John A. Mascaro Learning Center The John A. Mascaro Learning Center in Civil and Environmental Engineering was dedicated on September 14, 2000. The Learning Center seats sixty students, with every two seats sharing a desktop computer. The room is equipped with two retractable projection screens, which can be independently controlled. The same image or different images can be projected on both screens simultaneously. Videotape and DVD projections are possible, all controlled through a console on the podium. Also available is a document reader, which can project 3-D objects and transparency films on both screens. The computers are networked so that the instructor can access and control all of the computers in the room from the podium. The speaker on the podium is able to access any of the thirty computers on the desks, capture a student's program on his monitor and project the image on the monitor on the retractable screens for the whole class to see. This capability permits an instructor to share and analyze each student's work and discuss aspects of his assignment or project with the rest of the class. All computers can access the Internet independently.

Mascaro Center for Sustainable Innovation (MCSI) In 2003, through funding from the Heinz Endowments, the George Bevier Estate and John C. Mascaro (Chairman of Mascaro Construction Company), the Swanson School of Engineering established the Mascaro Center for Sustainable Innovation (MCSI) as a center of excellence that focuses on innovative research, education and outreach to enable more sustainable communities.

MCSI’s expertise includes the built environment, infrastructure and materials. Over the past ten years, MCSI has supported over 57 research teams who are tackling diverse and challenging sustainability issues comprising faculty from all six engineering departments. MCSI has also supported over 165 undergraduate students for 12-week summer research projects in sustainable engineering and MCSI faculty have developed 6 interdisciplinary courses for undergraduate and graduate students as well as hosts the Engineering for Humanity Certificate. The Center boasts a strong community outreach component including a biannual Engineering Sustainability conference where experts in the field gather to explore the state-of-the-art in sustainability research. For more information visit us at: www.mascarocenter.pitt.edu Materials Micro-Characterization Laboratory (MMCL) The MMCL is located on the 5th floor of Benedum Engineering Hall. The MMCL is part of the Mechanical Engineering and Materials Science Department. The laboratory houses instrumentation for X-ray diffraction (XRD) and texture characterization. Scanning electron microscopy (JEOL 6610V and Philips XL-30 FEG SEM) both systems with OIM for EBSD analysis. Transmission electron microscopy TEM 200CX and FEI Tecnai G2 F20 S-Twin TMP microscope and scanning probe/stylus microscopy (STM, AFM, Nanohardness), together with a range of sample preparation equipment. This facility and its staff offer access to instrumentation and expertise for the structural, compositional, and chemical characterization of materials down to near-atomic scale.

The XRD Laboratory has two XRD Diffraction systems located in this laboratory. A stateof- the- art Empyrean XRD tube system the successor to PANalytical’s well-proven X’Pert Tube is available. The Empyrean tube has been designed and optimized for PANalytical's Empyrean diffractometers. In addition, the new diffraction tube is fully compatible with all PANalytical’s existing X'Pert PRO, X’Pert Powder, CubiX PRO, CubiX FAST, CubiX3 and X'Pert diffractometer systems.

The Empyrean PANalytical offers non-destructive, cutting-edge characterization solutions for solids, fluids, thin films or nanomaterials. The system provides detailed information on elemental and/or phase composition, crystallographic texture, crystalline quality, and/or nanoparticle size distributions and

48

shape. The second unit is fully dedicated to teaching undergraduate students to study powder diffraction and includes a platinum hot stage capable of temperatures up to 1100°C as well as a vacuum furnace capable of temperatures above 1000°C. This diffractometer has a thin film attachment and Eulerian cradle useful for the study of crystallographic textures and the determination of pole-figures. Computers for on-line and off-line processing and analysis of diffraction data are also available in this laboratory.

The TEM Laboratory has tTwo 200kV transmission electron microscopes available. The JEOL 200CX has line resolution of 0.14 nm. The JEOL 200CX is equipped with a tungsten filament, capable of conventional diffraction contrast imaging, selected area diffraction, and magnetic domain imaging by Lorentz TEM. The TEM laboratory has a newly acquired FEI Tecnai G2 F20 S-Twin TMP microscope. This system is a true multi-purpose, multi-user 200 kV instrument. This microscope is a field emission gun transmission electron microscope. It combines high performance in all TEM, energy-filtered TEM (EFTEM) & scanning TEM (STEM) modes with ease of operation in a multi-user materials research environment. The FEI Tecnai G2 F20 S-Twin analytical transmission electron microscope permits analysis and characterization of the detailed microstructural and microchemical changes in materials that control their properties and performance. The FEI Tecnai G2 F20 S-Twin microscope will facilitate the study of material interfaces, observing microstructures, precipitates, and quantifying elemental composition and distribution, investigating the limits of material structure and properties whether working at sub-micron or sub-Angstrom scales.

The Scanning Probe Microscopy Laboratory has a Digital Instruments Dimension 3100 scanning probe microscope permits atomic force microscopy (AFM), scanning tunneling microscopy (STM), and magnetic force microscopy (MFM) investigations in a single platform. Samples up to eight inches in diameter can be scanned in air or fluids and automated stepping can be used to scan multiple areas of the sample without operator intervention.

Mechanical Testing This facility includes two hydraulic MTS machines. One has a high temperature capability for hot deformation simulation and the other is an MTS 880, 20,000-pound frame with hydraulic grips and temperature capability up to 1000˚C. Two screw-driven machines are available, a 50,000-pound Instron TT and a 10,000-pound ATS tabletop tester (this machine has fixtures for loading in tension, compression and bending). The facility also includes several digital hardness testers, including one Brinell, two Rockwell, one Rockwell Superficial, and one Vickers, plus a new Leco M-400 G microhardness tester. Two impact test machines are available—one with 100 foot-per-pound and the other with 265 foot-per-pound capacity. An ultrasonic elastic modulus tester is also available.

Mechanics of Active Materials Laboratory The Mechanics of Active Materials Laboratory focuses on the experiment- and physicsbased constitutive modeling of smart materials, with a strong secondary emphasis on applications.

A smart (or active) material is any material that can transform energy from one domain to another, akin to how man-made motors transform electrical energy into mechanical work. Dr. Lisa Weiland is the director of this laboratory, in which active materials such ferroelectric ceramics, electroactive and photoactive polymers, and nastic materials are considered both experimentally and computationally. Experimental studies focus on developing characterization methods for novel materials for which there are no established procedures. Computational studies generally focus on nano length scale active response as a means to anticipate macro length scale response. The goal of research is to understand the multi-scale physics responsible for the 'smart'

49

behavior observed in these materials in order to expand viable engineering applications which range from shape morphing structures and bio-sensors to a range of adaptive structures concepts appropriate to sustainability challenges.

Metals Processing This laboratory includes a cold rolling mill and various muffle and recirculating air furnaces for heat treatment of metals and alloys. Metal melting and casting facilities include air, inert atmosphere, and vacuum facilities. A special arc melting unit also provides a facility for preparing buttons and rapidly solidified ribbons.

Micro/Bio Fluidics Laboratory Micro/Bio Fluidics Laboratory is primarily devoted to (1) engineering and developing a variety of micro/bio fluidic sensors, actuator and integrated systems that enable us to handle a wide range of micro/bio objects with more direct access and to (2) studying science and engineering associated with them. In particular, most research activities are heavily involved with micro fabrications. Available equipment includes a high-power florescent microscope, a lowpower microscope, optical benches, a parylene coater, computers, data acquisition systems, highvoltage amplifiers, a conductivity meter, arbitrary waveform generators, MEMS device design software and so on.

Micromechanics and Nano-science Laboratory This mechanical engineering laboratory is a modern facility with cutting-edge technology for the study of micromechanics and physics of micrometer and nanometer scaled structures and materials. The laboratory contains atomic force microscopes and a nano-indentation testing facility, which provide a capability of measuring load vs. displacement at scales of 10-9 Newton versus nanometer, nano-scaled adhesion, and micro-mechanical behavior for advanced materials including semiconductors and biosystems.

Micro-/Nano-electronic Device Characterization and Modeling Lab The ECE Department houses measurement and modeling capabilities for physical characterization of micro- and nano-scale electronic devices and for derivation of equivalent circuit models for novel devices. DC characterization instrumentation includes a Keithley 4200 Semiconductor Characterization System (4200 SCS) including pulsed excitation and RF instrumentation includes an Anritsu 37397D Vector Network Analyzer which can make s-parameter measurements on the device under test (DUT) between 40 MHz and 67 GHz. Measurement can be made on fabricated wafers or bare die using a Cascade Microtech M-150 manual probe station.

Additionally, Agilent IC-CAP integrated software is available to enable computer based control of instrumentation, computation of extracted parameters, and extraction of equivalent circuit models.

Tanner L-Edit Prof software is utilized for designing photolithographic mask sets for novel device fabrication and it’s also utilized for SPICE integrated circuit design and performance assessment using the derived equivalent circuit models. Synposis Saber is used for modeling and simulation of power electronic devices and circuits. Nanowire structures are grown for device application in a chemical vapor deposition system.

50

Mircosensor and Microactuator Laboratory With supports from federal funding agents, the current and future research activities conducted in the two Labs can be grouped in following closely related areas: 1) fabrication and property characterization of piezoelectric, pyroelectric and ferroelectric thin films and thick films; 2) on-chip integrated microsensors and microactuators that are based on piezoelectric AlN, ZnO and PZT thin film materials; 3) acoustic wave devices, including thin film bulk acoustic wave devices for RF and microwave frequency control application, and acoustic wave sensors; 4) piezoelectric and electrostrictive ceramics, and polymers such as PZT, PMN-PT, PVDF and copolymers, electro active elastomers, magnetostrictive materials, multiferroic materials, and other functional materials for transducers and biomedical applications; 5) Fabrication and characterization of semiconductor nanowires, nanoparticles, and multifunctional nanocomposites.

The laboratories accommodate extensive fabrication and characterization capabilities for functional materials and devices.

Molecular Biological and Biophysical Core Facility This core facility has: 1) gel-imaging station, spectrophotometer, high speed centrifuge, ultracentrifuge, -80o C freezer, environmental shaker, and incubator for microbiological research, 2) cold room, sterilizer and lab ware washer, 3) an atomic force microscope and an fluorescence microscope (Olympus IX70), which can be integrated to carry out simultaneous nanometer resolution AFM imaging and optical fluorescence imaging, 4) a cell-culture room that is equipped with tissue culture incubators, laminar flow hood, centrifuge and a microscope, and 4) a wet lab which has equipment necessary to for biochemistry and molecular biology research.

Frank Mosier Chemical Engineering Learning Center The Department’s state-of-the-art Frank Mosier Learning Center has been designed to facilitate active learning through a unique classroom design. The computer and audio-visual systems in the Learning Center permit computer-based “hands-on” activities in class under the direct oversight of the professor. This instructional format promotes improved learning and retention of recently acquired skills and knowledge. Full use of this new integrated instructional methodology is made possible by the integrated computer, audio-visual, and facility design.

The Frank Mosier Learning Center is located on the 12th floor of Benedum Hall. The development of the Learning Center was made possible through the generous support of Mr. Mosier and supplemental support from the University Classroom Renovation Project. The computer system was designed and implemented by the University’s Computer Support and Systems Design Department.

Nanorobotics and Scanning Probe Laboratory The nanorobotics and scanning probe laboratory is a research lab devised for the investigation of nanorobotic manipulation for nanodevice fabrication and for the development of advanced scanning probe technology in characterization of nanoscale materials and devcies. The major equipment in this lab includes: Agilent 5500 Reconfigurable Scanning Probe Microscope; PHANTOM Omni Joystick (SenSable Inc.); Programmable spin coater VTC-200; Precision Diamond Wire Saw With Digital Control STX-202; Mini Plasma Sputtering Coater GSL-1100X-SPC-12; and etc. The onging research activities include: deterministic assembly of nanowire-based electronc device; in situ characterization of organic solar cells; and nanorobotic patch-clamping guided by molecular recognition.

51

Nanoscale Optoelectronics Laboratory Facilities exist for research in developing new device structures and device physics that are based on optical and electronic phenomena occurring in nanoscale structured materials. A broad spectrum of instruments are available for synthesis, fabrication, and characterization, including bottomup (self-assembly) and top-down processes of nanostructured materials and their integration at all length scales (from nano to wafer scale). Plasmonic phenomena occurring in nano-optic structures are of particular interest, since many novel properties derived from the phenomena can be incorporated into an on-chip configuration for nanosystems-on-a-chip that offer multifunctionality across heterogeneous domains (optical, electrical, chemical, biological, etc). The facilities include wafer cleaning and chemical etching; deep-UV contact mask aligner (Karl Suss MJB 3); plasma etching (Unaxis ICP-RIE 790); surface profilometer (Alpha-Step 200); thermal oxidation, annealing, diffusion, pyrolysis, or alloying processes; optical microscope; wire saw and polishing/lapping machine; UV holographic lithography; anodic oxidation and electrodeposition processes; physical vapor deposition (RF magnetron sputtering and thermal evaporation); semiconductor parameter analyzer (Hewlett Packard 4145B); electrochemical doping profiler (Bio-Rad PN4300); capacitance-voltage measurement (Keithley); deep level transient spectroscopy (Bio-Rad DL4600); probe-station (Karl Suss PM 3); LN2 cryostat; a broad spectrum of optical apparatus for spectroscopy and imaging in the UV-visible-IR and (200-1750 nm); plasmonic optical trapping; scanning-probe-based near-to-far-field optical characterization setup.

National Science Foundation Center for e-Design The Center's mission is to serve as a national center of excellence in IT enabled design and realization of mechanically engineered products and systems by envisioning that information is the lifeblood of an enterprise and collaboration is the hallmark that seamlessly integrates design, development, testing, manufacturing, and servicing of products around the world. The Center for e-Design and Realization focuses on its activities through three intertwined areas to deliver value to its members. First, the Fundamental Basic Research focuses on creating new collaborative design methods and technologies to address industry relevant needs in IT enabled product development and realization including: enabling information infrastructure; conceptual design tools & design process models; life cycle, collaborative, multidisciplinary design; and virtual prototyping and simulation. The Research Test-bed (Pegasus) is being developed for benchmarking various design technologies for interoperability. This platform will ensure the integration of interdisciplinary research activities to validate developed tools, methods and technologies and establish a common framework for multiple applications. The test-bed fosters collaborative research projects between industrial and academic engineers and scientists. The Education and Technology Transfer programs disseminate research results to industry and academic communities. This NSF Industry/ University Cooperative Research Center has current members from government and industry including: Wright Patterson Air Force Research Laboratory, RDECOM, BAE Systems, GE Aircraft Engine, IBM, Pratt & Whitney, Ansys, GMC, Raytheon, Respironics, Vistagy, Siemens, and Lockheed Martin, Engineous Software, PTC, VCollab. The research at the Center for e-Design is largely conducted in virtual space therefore the Center is home to numerous high powered workstations with access to outside supercomputing facilities. Currently, the academic partners are the University of Pittsburgh (lead University), and the University of Massachusetts at Amherst. Professor and Chairman Bopaya Bidanda in the Department of Industrial Engineering University of Pittsburgh is the Director of the NSF Center for e-Design.

52

Nondestructive Evaluation and Structural Health Monitoring Laboratory The laboratory for nondestructive evaluation (NDE) and structural health monitoring (SHM) studies is a new facility established in September 2006. The facility consists of about 750 square feet of dust-free space, which contains the state-of-the-art equipment in ultrasonic testing and acoustic emission (AE) technology. The laboratory includes: - Acoustic Emission Instrumentation: one Physical Acoustics Corporation 4-cahnnel PCI/DSP system with waveform module including a notebook computer and AE-Win software; acoustic emission pico, WD, and S14 AE-transducers.

- Ultrasonic Testing Instrumentation: one Tektronix AFG3022 arbitrary function generator (2 output channels); one Lecroy Waverunner 44Xi 4-channels oscilloscope (with PC incorporated running under Windows XP); four commercial broadband OlympusNDT-Panametrics Ultrasonic Transducers; one OlympusNDT-Panametrics high power (max 400 Volts) signal generator.

- Modal Testing Instrumentation: 8-channel, line-powered, ICP® sensor signal conditioner; four 1/4 in. pre-polarized condenser microphone, free-field, 4 mV/Pa, 4 to 80k Hz (± 2 dB); Modally Tuned® Impulse Hammer w/force sensor and tips, 0 to 100 lbf, 50 mV/lbf (11.2 mV/N); one 086D80 Miniature Instrumented Impulse Hammer w/force tips, 0 to 50 lbf.

- Miscellaneous Equipment: one National Instrument-PXI 1042Q chassis with arbitrary function generator and multifunction Data Acquisition System; one acoustic microphone AT815b; three PC, 2 running under Windows XP and one running under Windows Vista operative systems.

Optical Computing Systems Laboratory The Optical Computing Systems Laboratory supports joint research with Computer Science in guided wave optical computing, communications, and storage. Equipment consists of two high speed sampling oscilloscopes: a Tek 11402 3GHz digitizing scope and a Tek CSA803 50GHz Communications Signal Analyzer, as well as a Tek 1240 Logic Analyzer, assorted bench equipment: supplies, function generators, etc. and facilities for PCB design and prototyping of opto-electronic subsystems.

Orthopaedic Robotics Laboratory This research laboratory is under the direction of Volker Musahl, MD and Richard E. Debski, PhD and offers graduate and undergraduate students the ability to participate in research related to musculoskeletal injuries with emphasis on soft tissue injuries at the knee and shoulder. This research utilizes novel robotic technology to study the structure and function of the soft tissues (ligaments, tendons, meniscus, cartilage) at these joints. The facility has: 1) a robotic testing system to apply 6DOF loads to cadaveric specimens, 2) a Shoulder Testing Apparatus r4 to simulate muscle loading at the knee and shoulder, and 3) a materials testing machine. These capabilities are enhanced by supporting equipment that can measure joint contact pressures; tissue deformations and forces during joint loading. State-of-the-art fluoroscopy, ultrasound, and arthroscopy systems are also available.

Orthopaedic Engineering Laboratory The Orthopaedic Engineering Laboratory is collaboration between the Mechanical Engineering and Materials Science Department and the Department of Orthopaedic Surgery at the University of Pittsburgh. This lab performs computational simulation and experimental evaluation of surgical procedures, injury modeling and assessment of biomechanical functions. Other activities included the medical device development, tissues engineering, characterization of tissue properties and

53

quantitative anatomical description. The goal of this lab is the advancement of orthopaedic medicine through the application of engineering analysis.

Pavement Mechanics and Materials Laboratory The Department of Civil and Environmental Engineering Pavement Mechanics and Materials Laboratory has developed into an all encompassing laboratory equipped to perform a full range of tasks including the casting, curing and testing of everything from concrete specimens to full-scale pavements.

The 2700 ft2 facility features the latest equipment in both destructive and non-destructive testing of portland cement concrete. Housed within the lab are two environmentally controlled rooms. The 1007-ft3 room can be adjusted to replicate a wide range of environmental conditions for curing portland cement concrete test specimens while the 630-ft3 room is maintained at a constant temperature and humidity for determining the drying-shrinkage properties of concrete in accordance with ASTM-157.

The laboratory is equipped with everything needed for measuring basic aggregate properties such as the gradation, absorption capacity and specific gravity, as well as, more detailed characterizations such as determining wear resistance using the Los Angeles abrasion machine or running a micro-deval test. A 5.5 ft2 concrete mixer and all other necessary tools for casting concrete specimens are available along with equipment for measuring the properties of fresh concrete. The laboratory is equipped to test the more basic properties of hardened concrete, such as, strength, elastic modulus and Poisson’s ratio along with the more elaborate testing equipment needed for measuring such things as the dynamic modulus, thermal coefficient or fracture toughness of concrete. Some of the sample preparation equipment available in the laboratory includes a concrete saw, core machine and a fume hood for sulfur capping.

The laboratory houses a Baldwin compression machine that can be used to apply loads up to 200,000 lbs. A multitude of tests can also be performed using the MTS TestStar Controller. The controller can be used for performing dynamic testing using a closed-loop servo hydraulic test machine. This system can be fed by either a 10 gpm or 60 gpm hydraulic pump.

Photonics Innovation and Research Laboratory (PIRI) This Electrical Engineering lab is equipped with state-of-art facilities to perform cutting edge research in nanophotonics, fiber optics, advanced manufacturing, energy, and medicine. Laser facilities in PIRI ranges from sub-10 fs ultra-short pulse lasers to ultra-short wavelength deep UV lasers, and extensive collection of laser systems for laser processing, metrology, mid-IR, and fiber optical applications. Our dynamic laser beam shaping tools can synthesize laser pulse with < 1fs temporal resolution and < 10 nm spatial resolution to study and to optimize laser-matter interaction; to perform coherent control of carrier dynamics in nanostructures; to carry out highly sensitive metrology measurements.

Equipped with 6-axis motion control systems with nanometer accuracy, both ultrafast and UV laser systems can perform high-precision 3D laser manufacturing (micro-pending, 3D direct laser writing, laser-assisted lift-off, micro-bonding, and other subtractive and additive manufacturing). A 12axis motorized integrated optical interrogation system is available for lightwave circuit characterization.

PIRI possesses strong fiber optical capability. A scanning laser writing setup is available for fabricating long and sophisticate fiber Bragg grating arrays (phase-shift, chirped, moire Bragg grating and long-period grating) in traditional silica fiber, air-hole microstructural fibers, and non-silica fibers.

PIRI has a rich collection of phase mask to produce fiber Bragg gratings in 1.0, 1.5, and 2.0 mm wavelength windows. A high-pressure (>200 bars) hydrogen loading chamber is available to photosensitize standard fibers or waveguides. Support equipment including multiple sets of optical

54

spectral analyzers, fusion splicers, high-resolution tunable lasers, broadband sources (to cover from 980 nm to 2000 nm).

PIRI has board capabilities and expertise in fiber grating sensors and distributed fiber sensing using both Rayleigh and Brillioun scattering schemes. Working with industrial partners, our sensing expertise includes fiber sensing at both cryogenic and high temperature environments for space, energy, and environmental monitoring. PIRI also has strong mid-IR capabilities including Tm-doped ultrafast fiber laser developments and applications, mid-IR laser waveguide and fiber lasers between 2 and 4 mm.

Together with world-leading medical experts from UPMC, PIRI research engages in endoscopic therapies and diagnostics research to determine cancer margins, to develop minimal invasive cardiovascular surgical procedures, and to improve outcome of kidney disease treatment.

PIRI has unique expertise on development and applications of radioactive micro-sources.

Pitt Circuits and Systems Laboratory (CASL) The Pitt CASL focuses on the broad conceptual understanding of the theory of computation using unreliable circuits, with applications to robust circuit and system design for scaled CMOS, lowdimensional nanomaterials such as graphene and carbon nanotubes, and computational systems biology.

Specifically, CASL researchers investigate cross-layer optimizations for adaptive architectures to address challenges of static and dynamic variability with CMOS scaling in modern embedded, superscalar, and multithreaded processors. CASL's research also addresses the technology optimization, device modeling and characterization, and novel design solutions necessary to harness the early science of novel nanomaterials such as graphene into practical solutions for digital as well as analog, mixed-signal, and radio frequency electronics. Members of CASL are also engaged in the development of discrete models and algorithms to study the dynamics inherent to regulation of cellular processes, which can lead to a better understanding of disease mechanisms, pharmaceutical drug discovery, and drug target validation. CASL researchers thus bridge: electrical and computer engineering and systems, computer science, device physics, materials science, and interdisciplinary fields such as computational systems biology.

Planar Lightwave Circuit (PLC) Laboratory This Electrical Engineering lab has complete design, growth, fabrication, test, trimming, and packaging facilities for both passive and active photonic circuits. This lab is based on a flame hydrolysis deposition system and is capable of producing single-mode and multimode silica waveguides on 6-inch wafers with thickness from 1 to 400 microns. The films can be doped with B, P, and Ge for controlling the refractive indices with a precision better than 10-4. Active dopants (e.g. Er) are also available. Fabrication facilities include a spin coater, a mask aligner, and a deep reactive ion etcher (ICP). The characterization facilities are capable of conducting fully automatic transmission, birefringence, and polarization-dependent loss measurements in sophisticated waveguide structures.

The packaging facilities include edge polishing, dicing, birefringence compensation, and fiberwaveguide bonding. The supporting equipment for the PLC laboratory includes optical spectrum analyzers, high-precision tunable lasers, optical multimeters, Er-doped ASE light sources, diode lasers (635 nm and 1550 nm), a polarization controller, high power UV light sources, a phase contrast microscope with motorized sample stages, a metricon prism coupler, a wet etching station, and simulation packages for waveguides and free-space optical elements.

55

RFID Center of Excellence The RFID Center of Excellence is likely the most well equipped RFID Research Center in the world. The Center is currently housed in six laboratories within Benedum Hall. Equipment includes numerous Real Time Spectrum Analyzers, state of the art Network Analyzers, numerous professional grade power meters, Spectrum Analyzers, LCR meters and all the necessary bench support equipment including as RF amplifiers, power supplies, various antennas, etc. The Center also houses two Anechoic Chambers and a GTEM Cell. Commercial RFID readers and tags for all classical RF bands are available for use in standards and performance testing.

Radio Frequency (RF) technology is permeating most all aspects of everyday life well beyond cellular telephones and pagers including the Internet of Things. The components to use RF in various devices are relatively simple to use and they extend the functionality of common household, personal and industrial, scientific and medical objects and equipment.

The RF Prototyping and Measurements facilities provide for testing and demonstration of novel and unique applications of this technology. The devices available include commercially available components and custom designed devices built within the Swanson School of Engineering of the University of Pittsburgh. Examples include: implantable medical devices, low power communications, and human interface systems.

This laboratory is the home of the PENI Tag. The PENI Tag technology is an enabling technology that makes possible operational devices that are currently as small as 3 cubic millimeters in size with no batteries or connecting wires. The design of the small Systems On a Chip devices (SOC) requires the most modern computer workstations and software.

Chips are designed and simulated in this laboratory by a team of researchers. They are then submitted for fabrication over the internet to a remote foundry. The completed chips are then tested here.

The PENI Tag technology makes it possible to remotely provide power to operate a wide range of devices and systems that are used for product identification, such as bar codes in the supermarket, as well as sensing things such as temperature and humidity, and also to provide security functions.

Devices designed by teams using this laboratory have been the subject of extensive media coverage and have acquired the interest of technology and management persons of numerous major US corporations.

Radio Frequency Identification (RFID) Applications Laboratory The Radio Frequency Identification (RFID) Applications Laboratory within the IE Department is part of the University of Pittsburgh Swanson School of Engineering's RFID Center of Excellence.

The lab complements the work done at the Center in the development of RFID technology by focusing its research on the development and implementation of RFID applications in areas such as asset tracking, supply chain management and logistics. Facilities include software and hardware for testing readers and tags as well as other equipment such as conveyors and portals. Examples of current research projects include the optimal design of RFID portals and the optimal location of RFID reader antennae, evaluation and testing of tags and tag locations on consumer goods, statistical evaluation of data generated by RFID tags in retail environments, and the development of optimal implementation strategies for the EPC Global Gen2 protocol.

56

Radio-Frequency Prototyping and Measurements Laboratory Radio Frequency (RF) technology is permeating most all aspects of everyday life well beyond cellular telephones and pagers. The components to use RF in various devices are relatively simple to use and they extend the functionality of common household, personal and industrial, scientific and medical objects and equipment.

The RF Prototyping and Measurements Laboratory provides facilities to test and demonstrate novel and unique applications of this technology. The devices available include commercially available components and custom designed devices build by the Swanson School of Engineering of the University of Pittsburgh. Examples include medical equipment, communications and industrial human interface systems.

Radio-Frequency Shielded Facility The Radio Frequency Shielded Laboratory supports the RF experiments and testing within the Department of Electrical Engineering. The walls of this laboratory are covered with copper plaques to prevent any radio frequency energy from entering or leaving the room. The RFS laboratory is 13 feet and 10 inches wide by 25 feet and 7 inches long, with a height of 9 feet and 2 inches.

Radio-Frequency Systems and Devices Laboratory This laboratory is the home of the PENI Tag. The PENI Tag technology is an enabling technology that makes possible operational devices that are currently as small as 3 cubic millimeters in size with no batteries or connecting wires. The design of the small Systems On a Chip (SOC) requires the most modern computer workstations and software.

Chips are designed and simulated in this laboratory by a team of researchers. They are then submitted for fabrication over the internet to a remote foundry. The completed chips are then tested here.

The PENI Tag technology makes it possible to remotely provide power to operate a wide range of devices and systems that are used for product identification such as bar codes in the supermarket as well as sensing things such as temperature and humidity, and in addition providing security functions.

In addition to computers (workstations) and software, the laboratory is equipped with a wide array of radio frequency test equipment.

Devices designed by the team using this laboratory have been the subject of extensive media coverage and have acquired the interest of technology and management persons of numerous major US corporations.

The Shankar Research Group The central themes of research at the Shankar Research Group are to characterize, control and exploit physical phenomena that are operative at the nanometer length-scale to engineer material systems with unprecedented properties. To this end, we focus on understanding the fundamental mechanics of deformation at the nano-scale, elucidation of kinetics of atomic transport in nanostructured domains and characterization of phase-transformations in

57

nanomaterials. Facilities include sample preparation capabilities for electron microscopy and micromechanical characterization, microhardness and tensile testing and capabilities for the creation of ultra-fine grained multi-phase materials. Current research is focused on the elucidation of microstructure evolution and behavior of multi-phase materials subjected to severe thermomechanical deformation and investigations of development of environmentally benign machining processes.

Sound, Systems and Structures Laboratory This mechanical engineering laboratory is dedicated to development, modeling, and experimental characterization of active systems at the micro (MEMS) and macro scales. The diverse range of projects typically blend the related fields of acoustics, noise control, hearing loss prevention, vibrations, structural-acoustic interaction, controls, and analog/digital signal processing. A 1,000 ft2 laboratory equipped with state of the art equipment. Past and current applications include biological modeling and control, development of automated classification systems, applied controls, and hearing loss prevention.

Statistical Signal Processing Laboratory This lab is dedicated to research in wireless communications, biomedical applications, and software defined radio.

Stochastic Modeling, Analysis and Control (SMAC) Laboratory The primary mission of the Stochastic Modeling, Analysis and Control (SMAC) Laboratory is to support research that addresses the modeling, analysis and control of engineering and service systems that have inherently stochastic elements. Research in the Lab emphasizes analytical and computer-based modeling of such systems (e.g., maintenance, production, telecommunications, inventory, transportation and healthcare), and their optimization by exploiting applied probability, stochastic processes and discrete stochastic optimal control techniques. This collaborative Laboratoryâ&#x20AC;&#x2122;s aim is to gain valuable insights into solutions to complex decision-making problems in uncertain environments. The SMAC Lab is primarily funded through grants from the National Science Foundation (NSF), the U.S. Department of Defense, the U.S. Nuclear Regulatory Commission, the Department of Veterans Affairs and other governmental agencies. Current research thrusts include the performance evaluation of large-scale sensor networks; degradation-based reliability modeling and evaluation; data-driven, adaptive maintenance planning models; spare parts inventory modeling and control; multi-server retrial queueing systems; medical decision making applications; healthcare operations; and satellite constellation maintenance modeling and optimization.

Structural Nanomaterials Laboratory This lab is directed by Dr. Ravi Shankar and its objective is to characterize, control and exploit physical phenomena that are operative at the nanometer length-scale to engineer material systems with unprecedented properties. To this end, we focus on understanding the fundamental mechanics of deformation at the nano-scale, elucidation of kinetics of atomic transport in nanostructured domains and characterization of phase-transformations in nanomaterials. Facilities include sample preparation capabilities for electron microscopy and micromechanical characterization, microhardness and tensile testing and capabilities for the creation of ultra-fine grained multi-phase materials. Current research is focused on the elucidation of microstructure

58

evolution and behavior of multi-phase materials subjected to severe thermo-mechanical deformation and investigations of development of environmentally benign machining processes.

Thermal and Chemical Analysis The department has thermograyimetric analysis and differential thermal analysis capabilities. DTA 7, differential thermal analyzer and a Theta high speed dilatometer are housed in the MEMS department.

Thermal Science and Imaging Laboratory The Thermal Science and Imaging Laboratory is equipped with advanced flow and heat transfer measurement facilities directed toward obtaining fundamental understanding and design strategies for advanced thermal control systems. Major equipment includes a subsonic wind tunnel, a particle imaging velocimetry, a computer-automated liquid crystal thermographic system, a UV-induced phosphor fluorescent thermometric imaging system, and a sublimationbased heat-mass analogous system. Specific projects currently underway include optimal endwall cooling, shaped-hole film cooling, innovative turbulator heat transfer enhancement, advanced concepts in trailing edge cooling, and instrumentation developments for unsteady thermal and pressure sensing.

Vascular Bioengineering Laboratory This research laboratory located in the Center for Bioengineering is under the direction of David A. Vorp, PhD, and offers post graduate, graduate and undergraduate students the ability to participate in research that seeks solutions for vascular pathologies. This research utilizes a variety of tissue engineering, cell biology, molecular biology, and experimental and computational biomechanics techniques. The facility has a cell-culture room that is equipped with tissue culture incubators, laminar flow hoods, and equipment for mechanical stimulation of cells in a 2D and 3D environment; a wet lab which has equipment necessary to do protein and molecular biology research and mechanical testing of biological materials; a microscopy room that houses a Nikon Eclipse E800 research grade microscope and NIS elements image acquisition and analysis system; and a computational analysis lab which has high end computer modules and engineering software for reconstructing and analyzing 3D models of vascular aneurysms.

Veterans Engineering Resource Center The Veterans Engineering Resource Center (VERC) is a collaboration with the Veterans Affairs Pittsburgh Health System (VAPHS). Its goal is the development and application of systems engineering methods and principles to health care systems. These include analytical and computer based modeling methods such as queuing, optimization, simulation, and decision analysis. The methods that the VERC develops will contribute to data driven analysis that provides insight into operational problems faced by health care systems management and suggest potential courses of action. â&#x20AC;&#x153;Current research is focused on surgery scheduling, critical care

management, reusable medical equipment, and prosthetics inventory management.â&#x20AC;?

59

Vibration and Control Laboratory The Vibration and Control Laboratory is devoted to the study of smart structures and microsystems. The primary focus is on the use of smart materials in a variety of applications, including structural vibration control, microelectromechanical systems (including sensors, actuators, resonators, and filters), and energy harvesting. The laboratory is well equipped for experimental and analytical research. Equipment includes computers and data acquisition hardware for simulation and real-time control of dynamic electromechanical systems; a variety of modern transducers and instrumentation for sensing, actuation, and measurement such as dynamic signal analyzers, shakers, high voltage power supplies, and amplifiers, and a variety of basic instrumentation and sensors; and a work center for constructing electronics and test rigs, with emphasis on piezoelectric systems.

The Visualization and Image Analysis (VIA) Laboratory This laboratory, directed by George Stetten, MD and PhD, is based at the University of Pittsburgh in Benedum rooms 434 and 435, and at Carnegie Mellon University in Newell Simon Hall A427. We are developing new methods of displaying and analyzing images, primarily for medical applications. We have introduced a new device called the Sonic Flashlight TM, for guiding invasive medical procedures, and are currently developing similar technology using optical coherence tomography to guide eye surgery. We have introduced FingerSight TM to allow visually impaired individuals to sense the visual world with their fingertips, and ProbeSight to give ultrasound transducers the ability to incorporate visual information from the surface of the patient. Finally, we are developing a new type of surgical tool, the Hand Held Force Magnifier, which provides a magnified sense of forces at the tip of the tool for microsurgery.

Watkins-Haggart Structural Engineering Laboratory The Watkins-Haggart Structural Engineering Laboratory is the facility at the heart of the experimental structural engineering research efforts at the University of Pittsburgh. This unique facility located in the sub-basement of Benedum Hall on the main campus of the University of Pittsburgh. The Lab is a high-bay testing facility, 100â&#x20AC;&#x2122; long by 40â&#x20AC;&#x2122; wide by 30â&#x20AC;&#x2122; high with a reaction floor capable of resisting a half million pounds of force (tension or compression) over any 3 square foot area. The highbay testing area is serviced by a 10-ton radio controlled bridge crane. In addition, a fork truck and heavy equipment mover are available for additional lifting and moving capacity. As a compliment to the reaction floor, the lab is also equipped with a re-configurable, self-contained reaction frame that was donated by US Steel Corporation. Loading for full-scale testing carried out in the lab is provided by servo-controlled hydraulic actuators whose capacities range from a few hundred pounds up to a half million pounds each. The actuators are controlled by a state-of-the-art MTS digital closed-loop servohydraulic control system. Hydraulic power is supplied to the Lab through a series of hard-line hydraulic manifolds that interface with the labs two high capacity (60 gallon per minute of flow at 3,000 psi of pressure) hydraulic power units. A series of loading frames that range in capacity from 20,000 pounds to 400,000 pounds are also housed in the Watkins-Haggart Structural Engineering Laboratory. The laboratory has multiple computer controlled data acquisition systems that allow for the automatic reading and recording of over 130 discrete channels of instrumentation. The laboratory additionally houses extensive equipment and data acquisition suitable field testing structures.

60

John A. Swanson Institute for Technical Excellence The John A. Swanson Center for Product Innovation is a Swanson School of Engineering initiative that consists of four state-of-the-art laboratories that serve as a focal point for product development research and education at the University. The SCPI has been configured to provide a one-stop shop for University researchers and manufacturing and bioengineering companies interested in developing innovative new products and processes. The center ties together four otherwise distinct laboratories that parallel the new product's development lifecycle of design, prototyping, and manufacturing. It includes the Design and Multimedia Laboratory, the W.M. Keck Rapid Prototyping and Reverse Engineering Laboratory, the Kresge Rapid Manufacturing Laboratory, and the Micro-Electro-Mechanical Systems (MEMS) Laboratory. These laboratories contain design workstations, reverse engineering equipment, rapid prototyping equipment (that allows the manufacturing of polymer-based prototypes), rapid manufacturing equipment (that will produce fully functional prototypes and soft tooling), and micro- and nano-scale design technology.

John A. Swanson Micro/Nanotechnology Laboratory The Micro-Electro-Mechanical-Systems (MEMS) Laboratory is a newly established research and educational facility directed for design, fabrication, and performance characterization of various engineering systems in micro- and nano-scales. This laboratory is built upon the existing capabilities in precision manufacturing, smart materials and transducers, rapid prototyping, and semiconductor fabrication in the School of Engineering.

For the typical silicon-based MEMS processing, the school is already equipped with various workstations and laboratories for lithography, thin-film deposition, wet-etching, bonding, and device characterization. The Department of Mechanical Engineering and Materials Science Laboratory is currently expanding its research capabilities to both nano-scale devices and non-silicon-based thickfilm micro-devices.

New fabrication equipment, such as thick-film deposition/patterning facilities, deep reactive ion etching facilities, and special equipment to develop MEMS devices for biological and medical applications, is being established.

John A. Swanson Embedded Computing and Interfacing Laboratory The John A. Swanson Embedded Computing and Interfacing Laboratory provides a variety of the latest equipment and development software that allows students to design and test real-time embedded computer systems. The laboratory is used in undergraduate and graduate ECE and COE courses that focus on the interaction and interconnection of computers with real-world physical devices and systems. The facility contains 13 sets of high speed networked workstations, oscilloscopes, and other related equipment used for demonstration and experimentation. In addition, the laboratory contains a set of nine Altera DE2 FPGA boards and a set of nine ARM Evaluator-7T boards. Each of these system prototyping boards includes a complete suite of design software that allows students to program, compile, simulate, analyze, and debug their designs. This laboratory was created through a generous gift from John A. Swanson, a Pitt alumnus and friend of the University.

61

Swanson Center for Micro and Nano Systems (SCMNS) The Swanson Center for Micro and Nano Systems supports the numerous micro and nano technology research projects taking place in the School of Engineering. In the Center, industry members have the opportunity to work side by side with the researchers on emerging micro and nano technologies. The epicenter of the SCMNS activity occurs in the John A. Swanson Micro/Nanotechnology Laboratory (JASMN). JASMN is a highly specialized research and educational facility directed for design, fabrication, and performance

characterization of various engineering systems at the micro- and nano-scales. This laboratory is built upon the existing capabilities in precision manufacturing, smart materials and transducers, rapid prototyping, and semiconductor fabrication in the Swanson School of Engineering. For the typical silicon-based MEMS processing, the school is already equipped with various workstations and laboratories for lithography, thin-film deposition, wet-etching, bonding, and device characterization.

The JASMN Laboratory has recently expanded its research capabilities to both nano-scale devices and non-silicon-based thick-film micro-devices. New fabrication equipment, such as thick-film deposition/patterning facilities, deep reactive ion etching facilities, and special equipment to develop MEMS devices for biological and medical applications has bee incorporated into JASMN. â&#x20AC;˘ Sounds, Systems, and Structures Laboratory â&#x20AC;˘ Vibration and Control Laboratory

62

Academic Record Student Awards and Honors HONORS STUDENTS Fall 2013 Top 2% Undergraduate Honors Students Seniors Zachary A. Barnes Thomas A. Bednar Eric A. Buescher Michael R. Coury Emily J. Crabb Robert J. Dumont Hunter S. Eason David J. Eckman

Jonathan D. Fako Harrison M. Harker Kevin T. Hough Amy M. Howell Joshua R. Hunt Alexander D. Josowitz Donald E. Kline Jr. Oren S. Lawit

Stephanie F. Lee David W. Palm Michael J. Randazzo Brian J. Rhindress Joshua B. Selling Ivy Shi Raymond J. Van Ham Daniel A. Whitehurst

Eamonn T. Hughes Abigail E. Loneker Trevor S. McCauley Tyler D. McCauley

Daniel L. Mercader Erin M. Sarosi Garrett J. White Issac H. Wong

Garrett M. Klein Emmett A. Manzo Joshua E. Mealy Christopher R. Murrett

Ian T. Steck Marshall L. Steele

Juniors Logan J. Case Joseph C. Del Nano Dante A. Denillo Hannah C. Fernau 2013 Graduates Alexa D. Becker Benjamin J. Bucior Oliva A. Creasey Andrew M. Head

AMERICAN HEART ASSOCIATION PREDOCTORAL FELLOWSHIPS, to Robert Allen, Jeffrey T. Krawiec, and Jason Tchao.

AMERICAN SOCIETY OF CIVIL ENGINEERS 2013 FREEMAN FELLOWSHIP, to Kristin R. Dauer.

JOHN M. ARTHUR/DUQUESNE LIGHT FELLOWSHIP, to a student in electrical and computer engineering, to Ahmed H. Dallal.

ATS-CHESTER ENGINEERS FELLOWSHIP, to graduate students in civil and environmental engineering, to Oliver C. Green and Daniel Lipus.

63

MICHAEL BAKER CORPORATION SCHOLARSHIP IN CIVIL ENGINEERING, for a meritorious civil engineering student, to Hannah C. Fernau.

ELIZABETH U. BARANGER PREDOCTORAL FELLOWSHIP, to Elyse N. Stachler.

BASF ACADEMIC EXCELLENCE AWARD, to Benjamin J. Bucior.

BASHIOUM AWARD IN CHEMICAL ENGINEERING, for participation in departmental activities in chemical and petroleum engineering, to Kayla L. Williams.

JOHN F. BAZYK ENDOWED RESOURCE FUND, to a deserving undergraduate student, to Liza A. Bruk.

RUSSELL VOHR BECKETT AND HAZEL LEY BECKETT SCHOLARSHIP IN ELECTRICAL AND COMPUTER ENGINEERING, for undergraduate students in electrical or computer engineering, to Emily J. Crabb, Emily G. Redmond, and Andrew W. Schultz.

LEONARD H. BERENFIELD GRADUATE FELLOWSHIP IN BIOENGINEERING, to a graduate student in bioengineering, to Nicholas J. Ricciardi.

PHYLLIS S. BERSON SCHOLARSHIP, to an outstanding student in engineering, to Jenna M. Hanner.

SELWYN D. BERSON SCHOLARSHIP, to an outstanding student in engineering, to Brian J. Rhindress.

GEORGE M. BEVIER FELLOWSHIPS, to Lindsey Saldin and Carly J. Sombric.

BRASKEM AMERICA, INC. FELLOWSHIP AWARD, for a student in chemical and petroleum engineering, to Karan S. Kadakia.

PAUL R. AND ANN T. BRIDGES SCHOLARSHIP, for an undergraduate student in civil and environmental engineering from Western Pennsylvania concentrating in construction management, to Grace A. Meloy.

HAROLD D. BRODY STUDENT RESOURCE FUND, for academic merit, to Julie C. Fornaciari.

DAVE BUNDY SCHOLARSHIP, to meritorious undergraduate students in engineering, to Eric J. Amoroso, Christopher M. Dumm, Margaret E. Lucas, Garrett S. Ott, and Philmore F. Scott.

FRANCIS J. BURTT SCHOLARSHIP, for an outstanding engineering student, to William C. Price.

64

SHIO-MING CHIANG UNDERGRADUATE SCHOLARSHIP IN CHEMICAL AND PETROLEUM ENGINEERING, to Ian D. Abrahamsen, Joseph L. Andros, and Payton N. Forrest.

GEORGE H. CLAPP SCHOLARSHIP, for academic merit, to Emmeline L. Blanchard, Eric A. Buescher, Kevin A. Day, Kelli N. Edwards, Katelyn J. Loughery, and Michael J. Randazzo.

LON H. COLBORN SCHOLARSHIP IN CHEMICAL ENGINEERING, for a deserving student majoring in chemical and petroleum engineering, to Maura A. Beck.

WILLIAM R. COOK SCHOLARSHIP, to a deserving student in chemical and petroleum engineering, to Mallori M. Pherson.

JAMES COULL MEMORIAL SCHOLARSHIP, for an outstanding graduate student in the chemical and petroleum engineering department, to Saurabh Bhavsar.

HARVEY L. CUPP JR. SCHOLARSHIP, to deserving students in mechanical engineering, to John R. Bates, Ryan N. Dohn, Paige E. Fernald, Kevin J. Halpin, Jaclyn C. Krogh, Thomas A. Reuss, and Matthew J. Shanahan.

JAMES AND MARGARET DEGNAN SCHOLARSHIP, to undergraduate students in chemical and petroleum engineering, to Katherine Cinibulk, Laura A. Kingsley, and Gerald T. McFarlin IV. RALPH W. DENISEVICZ MEMORIAL SCHOLARSHIP, to an outstanding electrical engineering student, to Kirsten M. Taing.

DICK QUASI SCHOLARSHIP, to Jillian K. Gorski, Meghana A. Patil, Christopher W. Stavrakos, Dhanalakshmi K. Thiyagarajan, Raymond J. Van Ham, Elissa Warmbrand, and Jennifer L. Yeager.

PJ DICK INCORPORATED/TRUMBULL CORPORATION SCHOLARSHIP, to Nicole N. Dejean and Sarah M. Watte.

GEORGE S. DIVELY SCHOLARSHIP, for academic achievement in engineering, to Jake R. Bosin.

SAMUEL J. EASTON JR. MEMORIAL SCHOLARSHIP, for an outstanding upperclassman in electrical engineering, to Peter J. Stegman.

ENGINEERING MINORITY SCHOLARSHIP, for achievements and leadership in engineering, to Casey C. Tompkins-Rhoades.

THE WILSON J. AND KAREN A. FARMERIE FOUNDATION SCHOLARSHIP, to undergraduate students in mechanical engineering, to Jennifer E. Bracken and Caren T. Dieglio.

65

FESSENDEN-TROTT SCHOLARSHIP, for outstanding scholastic merit and activities, to Randy T. Catalogna, James R. Day, Robert J. Donahoe, Mark H. Russell, and Abigail J. Slavinsky.

REGIS F. FILTZ SCHOLARSHIP, for a qualified student from the Norwin School District, Westmoreland County, or Western Pennsylvania, to Michael H. Harr.

FIRST YEAR DIVERSITY AWARD, to outstanding students in engineering, to Mahalia Bradford, Charles D. Butler, Elizabeth R. Crumley, Mohamed A. Kashkoush, Katarina C. Klett, and Vincent A. Verret.

PAUL F. FULTON MEMORIAL SCHOLARSHIP, for academic achievement in chemical and petroleum engineering, to Pranathi Kaki, Shaun M. Murray, Kristin A. Osinski, Michael A. Owens, and Sarah E. Pachesky.

JAMES JR. AND WILLIAM GARDNER SCHOLARSHIP, for an outstanding student in engineering, to Felix D. Nguyen.

ALBERT E. AND OLGA GAZALIE ENDOWED SCHOLARSHIP, for high academic achievement in engineering at the undergraduate level, to Jordan X. Poindexter.

GENERAL MOTORS FOUNDATION SCHOLARSHIP FOR MINORITIES, for academic achievement, to Oghogho M. Igbineweka.

GENERAL MOTORS FOUNDATION SCHOLARSHIP FOR WOMEN, for academic achievement, to Marlee R. Hartenstein and Erin M. Sarosi.

HEINZ GRADUATE FELLOWSHIP IN GREEN MANUFACTURING, for a deserving student, to Kevin E. Gasperich.

DONALD M. HENDERSON ENGINEERING SCHOLARSHIP, to outstanding African American students in engineering, to Kiara R. Lee and Camille N. Sturdivant.

INSTITUTE OF INDUSTRIAL ENGINEERS 2013 HAROLD AND INGE MARCUS SCHOLARSHIP, to Jonathan D. Fako.

INSTITUTE OF INDUSTRIAL ENGINEERS 2013 UPS SCHOLARSHIP, for a minority student, to Gian-Gabriel Garcia.

K. LEROY IRVIS FELLOWSHIP, to provide outstanding African American students the opportunity to become involved in research in engineering, to Brandon B. Jennings and Christopher M. Mahoney.

JOHN A. JURENKO SCHOLARSHIP, for academic achievement by undergraduate electrical or computer engineering students, to Sarah E. Higbee, Nicholas M. Moellers, Alexander R. Sieman, and Wujie Wen.

66

WILLIAM J. KERSCHGENS MEMORIAL SCHOLARSHIP, to meritorious students enrolled in engineering, to Cecilia A. Collins, Joan R. Guyer, and Jonathan M. Mahoney.

ELMER J. AND CHARLOTTE MCMURRAY KIDNEY MEMORIAL SCHOLARSHIP, for academic achievement, to Devon L. Albert, Shannon L. Gorman, and Antonia P. Maxey.

EDWARD AND ALICE KONDIS SCHOLARSHIP, for an outstanding sophomore, junior, or senior student in engineering, to Molly E. Knewtson.

FRANK W. KOZEL SCHOLARSHIP IN ENGINEERING, for a meritorious student, to Mary B. Hassan.

WALTER L. LACHMAN ENGINEERING LEGACY FUND, to a deserving undergraduate student, to Jenna L. Dziki.

KARL H. LEWIS IMPACT ALUMNI ENDOWED FUND, to Jann A. Grovogui.

LUBRIZOL FOUNDATION SCHOLARSHIP, for outstanding students in chemical and petroleum engineering, to Olubanke I. Kayode, Brian M. Tackett, and Haotian Wang.

THE ROBERT LUFFY ENDOWED FUND IN THE DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING, to Alexis P. Wesenberg.

ROBERT v.d. LUFT SCHOLARSHIP, for academic merit in engineering, to Emma L. McBride and Shruti K. Vempati.

RICHARD J. MADDEN FOUNDATION SCHOLARSHIP, for undergraduate electrical or computer engineering students, to Christian G. Bottenfield, Maxim Campolo, Amy M. Johnson, Logan M. Kausch, Samantha L. Porach, and Arvind Prasadan.

ARTHUR MARIMPIETRI ENDOWED SCHOLARSHIP, for undergraduate engineering students in the Department of Mechanical Engineering and Materials Science, to Carlos R. Arguero, Roland K. Beard, Caroline R. Repola, and Benjamin P. Stein.

JOHN MAROUS STUDENT LEADERSHIP FUND, to Patrick G. Oâ&#x20AC;&#x2122;Donnell and Victoria R. Paumier.

GERALD E. McGINNIS BIOENGINEERING GRADUATE FELLOWSHIP, to support an outstanding bioengineering graduate student, to Alexander Malkin.

WILLIAM T. McKEON SCHOLARSHIP, to a meritorious undergraduate student to Rebecca W. Siegrist.

EDWIN B. McKINNEY STUDENT RESOURCE FUND, for an undergraduate student in electrical engineering, to Zachary T. Smith.

67

RICHARD KING MELLON GRADUATE STUDENT FELLOWSHIP, to Matthew M. Barry and Brandon M. Grainger.

MERIT SCHOLARSHIP FUND, for Katherine Coronado.

engineering students, to Greta R. Brecheisen and

JOHN M. MILLIKEN MEMORIAL SCHOLARSHIP, for meritorious students from Allegheny County, Pa., enrolled in engineering, to Christine M. Baker, Michelle M. Hoch, Steven V. Iasella, Taraneh S. Manesh, Oscar T. Prom, and Erica L. Stevens.

FRANK E. MOSIER SCHOLARSHIP, for engineering honor students from Elk County or Western Pennsylvania, to Angela M. Beck and Sarah A. Trossman.

NATIONAL COLLEGIATE INVENTORS AND INNOVATORS ALLIANCE FELLOW, to Nathan S. Smialek.

NATIONAL SCIENCE FOUNDATION GRADUATE RESEARCH FELLOWSHIP, to Denver M. Faulk, Sharlene N. Flesher, and Timothy J. Keane.

FRANK V. NAUGLE SCHOLARSHIP, to a deserving student in mechanical engineering, to Ryan M. Byrne.

OUTSTANDING SENIORS, to Olivia A. Creasey, Megan E. DeGraaf, Jason E. Gerlowski, Timothy M. Hoye, Joseph R. Landry, Meng Li, Caitlin T. Mehall, John J. Migliozzi, and Andrew C. Zmolek.

MARK G. PAPA SCHOLARSHIP, for undergraduate students in chemical and petroleum engineering, to Katharine M. Eichelman, Taylor R. Finn, and Kimaya Padgaonkar.

JOHN C. PAPP ENDOWED SCHOLARSHIP, for qualified students preferably from Riverview High School, Oakmont, Pa., to, Rodney S. Andrews and Christopher L. Williams.

PEX CLASS OF 1949 ENDOWED SCHOLARSHIP, to an outstanding student in engineering, to Antonio C. Deshields.

WESLEY C. PICKARD FELLOWSHIP, for a meritorious graduate student in bioengineering, to Christopher Carruthers.

THE KRISH A. PRABHU ENGINEERING LEGACY FUND, to deserving undergraduate bioengineering students, to Khaled Abdelrahman, Eileen L. Burke, Rohit R. Rao, and Stephanie L. Sexton.

PROFESSIONAL PROMISE AWARD IN CHEMICAL ENGINEERING, to Karen A. Kaminsky.

68

ROBERT E. RUMCIK '68 SCHOLARSHIP, for academic merit in materials science and engineering, to Matthew W. Andromalos, Christopher M. Dumm, and Kevin T. Hough.

CHARLES M. RUSSELL SCHOLARSHIP, to a sophomore, junior or senior in civil and environmental engineering, to Veronica A. Boyce.

GEORGE R. SHIARELLA SCHOLARSHIP, for high scholastic achievement in chemical and petroleum engineering, to Emily M. Campbell.

JAMES W. SHIELDS ENDOWED SCHOLARSHIP, for industrial engineering students, to Giancarlo F. Binando.

SILENT HOIST AND CRANE COMPANY AWARD, for meritorious achievement in chemical engineering, to Lauren E. Field.

EDWARD J. SLACK ENDOWED SCHOLARSHIP, for academic achievement by engineering students, to Laura E. Bechard, Saundria M. Moed, and Cynthia Wong.

EDWARD F. SOBOTA ENGINEERING LEGACY FUND, to Erik M. Jensen.

CRAIG STARESINICH SCHOLARSHIP, for an undergraduate student in engineering, to Nicole M. Salamacha.

EDWARD B. AND GERALDINE J. STUART MEMORIAL SCHOLARSHIP, for chemical engineering students who show scholastic excellence and service to the community, University, and department, to Andrew W. Beck and Mallori M. Pherson.

SAMUEL A. TAYLOR SCHOLARSHIP, for meritorious achievement in engineering, to Mara C. Palmer.

TEXACO FOUNDATION MINORITY ENDOWED SCHOLARSHIP, for a high achieving minority student in engineering, to Brittany E. Givens.

MARGARET A. THOMAS MEMORIAL SCHOLARSHIP, to students who demonstrate high scholastic aptitude, to Kirsten L. Carlson and Amanda J. Ward.

JOHN W. TIERNEY SCHOLARSHIP, for outstanding academic achievement and service to the Department of Chemical and Petroleum Engineering, to Karen A. Kaminsky.

2013 UNIVERSITY COOP STUDENT OF THE YEAR, to Haotian Wang.

USX FELLOWS, to Kara S. Bocan, Myungji Kim, and Yan Fang.

GEORGE WASHINGTON PRIZE, finalists, to engineering students who demonstrate qualities of academic excellence, service and leadership, to Stanislaw P. J. Gawel XXV and Andrew C. Zmolek.

69

GEORGE WASHINGTON PRIZE, winner, to an engineering student who demonstrates qualities of academic excellence, service and leadership, to Suyesh Acharya.

WATER ENVIRONMENTAL FEDERATION STUDENT PAPER COMPETION, FIRST PLACE, GRADUATE DIVISION, to Xuan Zheng.

EPHRAIM WERNER ENDOWED SCHOLARSHIP, for a student in chemical, materials science, or metallurgical engineering, to Bon C. Ikwuagwu.

MARIE B. ZEIS SCHOLARSHIP, to a student in chemical or materials science engineering, to Melissa R. Smith.

JOSEPH E. ZUPANICK SCHOLARSHIP IN MECHANICAL ENGINEERING, for a deserving engineering student, to Stephanie F. Lee.

70

71

25 67 60 10

0 2 1 184 669

155 175 378 26

2 25 2 421 1956

0 1 0 20 118

9 13 20 5

Af. F Am. 106 11 120 20 68 8 26 11

M 148 250 206 168

0 1 2 1 48

2 26 0 606 2577

0 0 0 15 60

10 4 10 1

0 0 0 50 147

6 4 13 2

0 0 0 0 1

0 0 1 0

0 0 0 0 0

0 0 0 0

2.0 26.4 0.8 606.4 2596.2

174.8 240.2 432.6 36.0

14 309

672

981

14

Graduate PartTime Total 9 167 8 63 56 175 0 6 1 4 49 161 45 138 98 195 19 48 10 10 0 0

0

FullTime 158 55 119 6 3 112 93 97 29 0

795.6

5.6

FTE 161.6 58.2 141.4 6.0 3.4 131.6 111.0 136.2 36.6 4.0 0.0 0.0

0 2 0 28 81

5 3 6 1

6 249

732

22

1

Af. F Am. 59 8 16 2 45 2 0 1 1 0 33 3 45 2 32 2 12 0 0 1

8

M 108 47 130 6 3 128 93 163 36 10

0 0 2 26 0 606 3249

FullTime 410 418 388 189 3 284 332 526 65

7

0

40

0

0

0

0

0

M 256 297 336 174 3 283 268 541 62

0 0 2 27 16 607 3596

0 0 0 2 7 184 918

0 0 0 1 1 20 139

0 0 0 0 0 15 67

Af. F Am. Hisp.

165 19 8 136 22 4 113 10 7 26 12 4 1 0 0 58 12 12 112 15 4 92 22 11 22 5 2

0 0 0 1 16 1 347

Total PartTime Total 11 421 15 433 61 449 11 200 1 4 56 340 48 380 107 633 19 84

0 0 2 25 0 10 421 11 2678

Graduate Asian/ Am. Pacific Indian/ MultiHisp. Islander Alaskan HAW Racial 3 23 0 0 3 0 2 0 0 2 0 5 0 0 0 0 0 0 0 0 0 0 0 0 0 2 4 0 0 0 0 2 0 0 5 1 2 0 0 1 1 1 0 0 0 0 1 0 0 0

HEADCOUNT ENROLLMENT BY SEX AND RACE

2 27 2 607 2625

179 242 438 36

FTE 252.8 365.8 271.0 187.4

Graduate Engr. Tech. Mgmt. Cert. (PT) = 0 (inc. in IE) Graduate Electric Power Engr. Cert. (PT) = 2 in-state (inc. in EE) Graduate Mining Engr. Cert. (PT) = 2 in-state; 1 out-of-state (inc. in CE) Graduate Medical Product Innovation Cert. (PT) = 2 in-state (inc. in Bioeng) Graduate Nuclear Engr. Cert. (PT) = 2 in-state (inc. in ME)

Dept./ Program Bioeng ChE & PetE CEE COE CMS EE IE ME MSE Nuclear EnRes MSEP EngrPh EngrSC Special Fresh.

TOTAL

7 3 9 0

172 239 429 36

Undergraduate PartTime Total 2 254 7 370 5 274 11 194

Undergraduate Asian/ Am. Pacific Indian/ MultiHisp. Islander Alaskan HAW Racial 5 36 0 0 9 4 13 0 0 10 7 10 0 0 6 4 13 0 0 11

Dept./ Program Bioeng ChE & PetE CEE COE CMS EE IE ME MSE Nuclear EnRes MSEP EngrPh EngrSC Special Fresh.

TOTAL

FullTime 252 363 269 183

HEADCOUNT ENROLLMENT

FALL TERM 2013

0 0 0 0 0 50 186

0 0 0 0 0 0 1

0 0 0 0 0 0 0

0 0 0 2 0 28 92

Total Asian/ Am. Pacific Indian/ MultiIslander Alaskan HAW Racial 59 0 0 12 15 0 0 12 15 0 0 6 13 0 0 11 0 0 0 0 10 0 0 5 6 0 0 8 15 1 0 7 3 0 0 1

0.0 0.0 2.0 26.4 6.4 606.4 3387.8

FTE 414.4 424.0 412.4 193.4 3.4 306.4 351.2 568.8 72.6

FALL TERM HEADCOUNT ENROLLMENT Undergraduate Dept./ Program

2006

2007

2008

2009

2010

2011

2012

2013

Bioeng

147

149

149

153

178

197

230

254

ChE

152

176

190

237

263

308

322

370

CEE

271

278

273

278

294

280

282

274

COE

148

153

140

147

141

166

181

194

EE

212

179

171

176

192

183

183

180

IE

163

166

172

171

175

205

219

242

ME

313

321

315

338

363

385

414

438

MSE

30

23

24

28

17

19

29

36

EngrPh

20

15

14

8

16

11

8

2

9

24

27

EngrSc Special Fresh.

TOTAL

3

10

7

8

6

5

12

3

493

527

559

560

546

555

564

605

1,952

1,997

2,014

2,104

2,191

2,323

2,468

2,625

Graduate Dept./ Program

2006

2007

2008

2009

2010

2011

2012

2013

ChE & PetE

40

45

49

46

64

74

61

63

CEE

68

69

93

118

154

134

162

175

Pub Wks

0

0

0

0

0

0

0

0

COE

3

4

4

5

5

5

8

6

CMS

0

0

0

0

0

0

2

4

EE

86

81

109

126

128

144

148

161

IE

73

78

82

95

86

84

116

138

ME

88

90

119

140

159

199

210

195

0

0

0

0

0

0

0

0

26

30

35

44

44

56

56

48

Mining MSE Nuclear

10

Bioeng

160

142

150

146

147

145

156

167

EnRes

0

0

0

0

0

0

0

0

MSEP

0

0

0

0

0

0

0

0

Special

8

23

22

31

28

21

17

14

552

562

663

751

815

862

936

981

TOTAL

72

73

1

393

1878

Fresh.

TOTAL

699

213

5

1

0

0

2577

606

0

26

2

48

1

2

1

0

2625

607

2

27

2

134

0

Graduate Engr. Tech. Mgmt. Cert. (PT) = 0 (inc. in IE) Graduate Electric Power Engr. Cert. (PT) = 2 in-state (inc. in EE) Graduate Mining Engr. Cert. (PT) = 2 in-state; 1 out-of-state (inc. in CE) Graduate Medical Product Innovation Cert. (PT) = 2 in-state (inc. in Bioeng) Graduate Nuclear Engr. Cert. (PT) = 2 in-state (inc. in ME)

47

2

Special

1

0

254

21

0

2

4

EngrSC

0

252

36

2

0

0

21

EngrPh

107

36

438

59

2

0

9

4

145

13

429

242

Bioeng

0

1

3

0

23

91

239

Nuclear

MSE

8

0

179

0

338

59

7

194

16

ME

3

172

11

274

8

180

0

183

5

370

IE

41

0

269

7

22

7

40

0

363

131

11

38

0

EE

143

COE

5

92

Total 6

268

14

6

10

17

96

28

44

1

0

46

In-State FT PT

0

231

CEE

7

Undergraduate Total Out-of-State FT PT FT PT

CMS

271

ChE & PetE

In-State FT PT

538

0

99

0

25

41

0

3

0

2

2

17

89 76

5

0

0

10

2

90

3

6

103

47

672

0

0

0

0

158

0

29

97

93

112

3

6

119

55

8

309

0

14

0

0

9

10

19

98

45

49

1

0

56

Graduate Out-of-State Total FT PT FT PT

FALL TERM 2013 IN-STATE/OUT-OF-STATE

981

0

14

0

0

167

10

48

195

138

161

4

6

175

63

Total

2012

393

0

21

2

204

0

27

359

184

153

0

143

247

279

315

1

16

1

0

8

10

17

104

31

51

1

11

51

13

In-State FT PT

1237

213

0

5

0

206

0

38

167

148

131

3

46

141

139

42

0

0

0

0

3

0

2

3

17

5

0

0

10

2

Totals Out-of-State FT PT

3249

606

0

26

2

410

0

65

526

332

284

3

189

388

418

357

1

16

1

0

11

10

19

107

48

56

1

11

61

15

Total FT PT

3606

607

16

27

2

421

10

84

633

380

340

4

200

449

433

Total

SWANSON SCHOOL OF ENGINEERING HEADCOUNT ENROLLMENT BY SEX FALL TERM 2013

UNDERGRADUATE

25.5%

74.5%

Female

Male

Female

Male

GRADUATE

25.4%

74.6%

74

SWANSON SCHOOL OF ENGINEERING HEADCOUNT ENROLLMENT BY RACE FALL TERM 2013

UNDERGRADUATE 0.04% 2.3%

0.0%

3.1%

5.6%

4.5%

84.46% Caucasian & International African American Hispanic Asian/Pacific Islander American Indian/Alaskan Hawaiian Multi-racial

GRADUATE 0.7%4.1%

0.0%

2.2%

0.0% 1.1%

91.9% Caucasian & International African American Hispanic Asian/Pacific Islander American Indian/Alaskan Hawaiian Multi-racial

75

Engineering Cooperative Education Program Participating Companies 2013 - 2014 4 Moms/Pittsburgh, Pa ABB Inc/Cleveland, OH Accenture, Inc./Greentree, PA Acutronic USA Inc/Blawnox, PA Advanced Acoustics/Uniontown, Pa Aerotech/Blawnox, PA AIG Advanced Integration Group/McKees Rocks, PA Air Products & Chemicals/Allentown, PA AK Steel/Butler, PA AKJ Industries/Ft. Myers, FL All Facilities Energy/Pittsburgh,Pa Almatis/Pittsburgh, Pa* American Airlines American Bridge Corporation American Contracting & Environmental Services/Laurel, MD ANSYS, Inc./Canonsburg, PA Arcadis/Seven Fields, PA Areva T & D/Charleroi, PA Areva/Cranberry Twp, Pa* Ariel/Mt. Vernon, OH ATI/Allegheny Ludlum/Brackenridge, PA Atlantis Technologies BASF/Monaca, Pa & Evans City, PA Bayer Material Science/Pittsburgh PA Bayer/Medrad/Indianola, Pa Bentley Systems/Exton, PA Bettcher Industries/Vermilion, Ohio Bimbo Bakeries/Philadelphia, PA Black Box/Lawrence, Pa BMW/Spartanburg, SC BNY Mellon/Pittsburgh, Pa & NYC Bombardier/West Mifflin, PA BoozAllenHamilton/Washington, DC Boston Scientific/Boston, MA Brayman Construction/Saxonburg, PA BridgeFusion/Murrysville, Pa* Brookville Equipment Co./Brookville, PA* Bunting Graphics/Verona, PA C3 Controls/Beaver, Pa Cal-Bay Systems/Sanrafall, Ca Cameron Measurement Systems/Pgh, Pa Carbon Steel Inspection/Pgh, Pa Cervis/Cranberry Twp, Pa

ChemAdvisor ChemRisk/Pittsburgh, Pa CIA/Washington, DC City Brewing Company/Latrobe, Pa Civil & Environmental Consultants Cleaveland/Price/Irwin, Pa Cleveland Construction/Cleveland, Oh Cohera Medical/Homestead, Pa Columbia Gas/Canonsburg, Pa Compunetix/Monroeville, PA Connors Group/Greensburg, Pa Constellium Rolled Products/Ravenswood,WV Corna/Kokosing/Columbus, OH Crane Company/TX, CA,IL,OH Crayola/Easton, PA Crown Castle/Canonsburg, Pa* C.S. Davidson/York, Pa Curtiss-Wright EMD Diebold/Canton, Ohio Disney World/Orlando, FL Dow Chemical/Midland, MI Draeger/Pittsburgh, Pa DSM Medical/Valley Forge, Pa DTE Energy/Pittsburgh, Pa* DTE Energy/Detroit, Michigan* E.I. Dupont/Newark, DE E.I. Dupont/Bell, WV* Eaton Electric/PA, WI,NY,NC,IL ElectroMechanical Engineering Associates*/Pittsburgh, Pa Ellwood Group, Inc. Emerson Process Management/Pittsburgh, Pa Emerson Climate Technologies/Sidney, Ohio Energy Management Consultants/Carlisle, PA Epic Metals/Rankin, Pa* Equitable Resources/Pittsburgh, Pa Estee Lauder/Long Island, NY Ethicon Endo- Surgery/Cincinnati, OH Ethicon/Somerville, NJ EverPower Wind Holdings/Pittsburgh, Pa Excela Heath Care /Greensburg, Pa

76

ExxonMobil/Fairfax, Va FDA/Medical Device/Washington, DC Federated Investors/Pgh, Pa FedEx Ground Corporate FedEx Ground Facilities First Energy Corporation/Akron, Ohio First Energy Nuclear Corporation GAI Consultants Genco Supply Chain Solutions G.E. Aviation/Cincinnati Ohio G.E. Converteam/Pittsburgh, Pa G.E. Transportation/Erie, PA G.E. Power/SC General Cable/Altoona, Pa Genentech/San Francisco, CA* Giant Eagle, Inc. Glatfelter/Chillicothe, Ohio GlaxoSmithKline/Philadelphia, Pa Great Lakes Construction/Hinckley, Ohio Groundwater & Environmental Services/Exton, Pa Grunley Construction/Maryland Gulfstream Aerospace/Savannah, Ga Harley Davidson/York, Pa Heinz North America Hendrickson Intl/Canton, Ohio Heraeus/New Castle, Pa Hershey Chocolates USA/Hershey, Pa Highmark/Pittsburgh, Pa Honda of America/Marysville, Ohio Human Engineering Research Lab IBACOS, Inc Immunetrics/Pgh, Pa Independence Excavating/Independence, Ohio Industrial Scientific/Oakdale, PA Infineum/Linden, NJ* Intel Corp/Folsom, CA Inteligistics/Pittsburgh, Pa Invensys/Pittsburgh, Pa* IQ Inc. Jacobs/Morristown, NJ James Construction/Carnegie, PA JB Fay/Pittsburgh, Pa Johnson & Johnson/NJ K & M Wireless Kennametal Inc./Latrobe, Pa KB Systems/Philadelphia, Pa KI SheetMetal/Pittsburgh, Pa Kiewit Construction Company/NJ Koppers/Pittsburgh, Pa*

L-3 Communications/Greenville, TX Langan Engineering/Elmwood Park, NJ Lanxess Libertas Copper/Leetsdale, Pa Lidestri Foods, Rochester, NY Logistics Management Institute/McLean, VA Lord Corporation/Erie, Pa Lubrizol Corporation/Wyckliffe, Ohio Lycoming Engines/Williamsport, Pa* Marathon Oil/Findlay, Ohio Mascaro Construction Massaro Construction McConway/Torley McNeil Consumer Healthcare/Ft. Washington, PA McNeil Consumer Healthcare/Lititz, PA Media Friends/Philadelphia, Pa Metalor/Export, Pa Metso Minerals/Canonsburg, Pa Michael Baker Corporation/Coraopolis, Pa Mine Safety Appliances / Cranberry, PA Mine Safety Appliances / Murrysville PA Moen/Cleveland, Ohio* Moog/Buffalo, NY* Morris Knowles & Associates/Delmont, PA Mosebach/Pittsburgh, Pa* MS Consultants/Pittsburgh, Pa Munnin Group/Pittsburgh, Pa NASA/Glenn Research/Cleveland, Ohio NASA/Johnson Space Center/Houston, TX National Security Agency/MD Naval Surface Warfare Center/Philadelphia, PA/Bethesda, MD NetApp/Cranberry Twp, Pa* Norfolk Southern/Norfolk, VA Nova Chemicals/Monaca, PA Oâ&#x20AC;&#x2122;Donnell Consulting/Bridgeville, Pa Old Castle Materials/Annville, Pa* OmNova Solutions/Akron, Ohio Parker Hannifin/Irwin, Pa* PA Dept of Transportation / Bridgeville PA Turnpike Commission/Harrisburg PCC Airfoils/Minerva, Ohio PCL Civil Constructors/Issaquah, WA Penske Truck Leasing/Reading, Pa* Pepco Holdings/Newark, DE Philips Medical/Cleveland, Ohio

77

Philips Respironics/Murrysville, Pa Pittsburgh Water & Sewer Authority P.J. Dick Corporation/Pittsburgh, Pa Plextronics/Pgh, Pa PPL/Allentown, Pa* Polyone/Manitowoc, WI Polyone/Washington, PA Proscia/Haverford, Pa* PTC Alliance/Wexford, Pa QinetiQ-NA Quest Diagnostics/Greentree, Pa* Raudenbush Engineering Richard Goettle, Inc./Pgh, Pa Robinson Fans/Zelienople, PA Rockwell Automation/Cleveland, Ohio Rogers Corporation/Woodstock, CT Rolls-Royce/Pittsburgh, Pa RTI International Metals/Niles, Ohio Sabra Wang/New Jersey Sam’s Club/Fayetteville, AK Savvior Technology Solutions SCA Technologies/Greentree, Pa* Schroeder Industries LLC/Leetsdale, PA Siemens Power Generation/PennHall, PA Special Metals/PCC/NY* Stanley Fasteners/Detroit, MI* Sunoco/Philadelphia, Pa* Tait Towers/* Teamus Construction/Carnegie, PA Tetratech NUS ThermoAnalytics, Inc./Calumet, MI ThorntonThomasetti/Philadlephia, Pa Timesys Corporation/Pittsburgh, Pa Tindall/Spartanburg,SC* Toyota/Ann Arbor, Michigan Transtar/McKees Rocks, Pa* Trumbull Corporation/Pittsburgh, PA Turner Construction/Pittsburgh, Pa Ulliman Schutte/Miamisburg, Ohio United Airlines/Houston, TX Universal Electric Universal Stainless/Bridgeville, PA U.S. Army Corps of Engineers/Pgh, Pa United Parcel Service/New Stanton PA UPS Professional Service/NewStanton,PA Valspar /Rochester, PA Venture Engineering/Pittsburgh, Pa Veolia Water/Pittsburgh, Pa* Verizon Wireless/Bridgeville, PA Veterans Engineering Resource Center* Virtual Officeware/Pittsburgh, Pa*

VoCollect/Monroeville, PA Volvo Construction Equipment/Shippensburg, PA Volvo/Haeger, MD* Walgreen’s/Carnegie, Pa Walsh Construction/Canonsburg, Pa Westinghouse Electric Co./Cranberry Twp, PA Westinghouse Specialty Metals/Blairsville, Pa Whiting Turner/Baltimore,MD World Kitchen/Charleroi, Pa* Working Buildings/Atlanta, GA* Zoll Lifecor/Blawnox, PA

Graduate Level Employers Advanced Micro Devices/Ft. Collins, Co Alcoa Technology/Pittsburgh, Pa Ansys/Canonsburg, Pa Broadcom/San Diego, Ca Century Link/Monroe, La Code Force/Alpharetta, GA Dck Worldwide/Pgh, Pa Fusion 10 Hewlett Packard/Palo Alto, CA TTS/Dallas, TX Grant Street Group/Pgh, Pa JSW Steel/Baytown, TX Lucas Systems/Wexford, Pa Management Science Associates/Pgh, Pa Missionary Tech Team/Longview, TX PA Dept Transportation/Bridgeville, Pa Rizzo and Associates Samsung/Richardson, TX Siemens Energy/Penn Hall, Pa Simio/Sewickley, Pa SJ Consulting/Sewickley, Pa Source Fire/Cranberry, Twp, Pa Tech Team Telecom Technology/Frisco, TX Uniscite/Greenville, SC

•

78

*Denotes new employer for 20132014

Co-op Participants by Discipline Department - Undergraduate BioEngineering

2013-2014 34

2012-2013 23

Chemical Engineering

142

118

Civil Engineering

140

142

Civil Engineering Technology

0

1

Computer Engineering

93

86

Computer Engineering Technology

1

0

Computer Science

41

28

Electrical Engineering

94

86

Engineering Physics/Science

9

6

Industrial Engineering

138

128

Information Technology

1

2

Materials Science & Engineering

13

6

Mechanical Engineering

222

217

Mechanical Engineering Technology

8

3

936

847

2013-2014

2012-2013

Total Undergraduate Participants Department - Graduate MS – Civil Engineering

1

2

MS –Computer & Electrical Engineering

1

3

MS – Industrial Engineering

9

9

MS – Information Science

5

7

MS – ME/MS

6

3

PhD – Civil & Environmental Engineering

1

1

PhD – Computer & Electrical Engineering

3

6

PhD - Materials

1

0

Total Graduate Participants

27

31

Total Participants

963

878

Participant Demographics 2013-2014

2012-2013

963 Participants

878 Participants

230 Female = 22% 733 Male = 78% 71 Asian = 7.3% 53 Black =5.5% 825 White = 85.6% 14 Hispanic = 1.4%

196 Female = 22% 682 Male = 78% 43 Asian = 5.3% 49 Black =5.5% 754 White = 85.7% 19 Asian / Indian = 2.1% 13 Hispanic = 1.4%

79

80

0

50

100

150

200

250

2009-2010 156 103 106 73 93 81 12 16 1 10 4 0 2 4 1 0 662

2010-2011 184 104 133 85 105 78 5 23 4 14 2 0 0 3 0 0 740

2011-2012 201 127 134 86 110 81 4 23 4 22 0 0 1 3 1 0 797

2012-2013 217 128 142 86 118 86 6 28 6 23 0 1 1 3 2 0 847

2013-2014 222 138 140 93 142 94 13 41 9 34 0 1 0 8 1 0 936

Note: Total co-op participants comprised of 936 undergraduate students and 27 graduate students (total = 963).

Mechanical Engineering Industrial Engineering Civil Engineering Electrical Engineering Chemical Engineering Computer Engineering Materials Science Computer Science Engr Physics/Science Bioengineering Chemistry CE Technology EE Technology ME Technology Information Technology Physics

Co-op Undergraduate Students 2013-2014

2013-2014

2012-2013

2011-2012

2010-2011

2009-2010

Five-year Co-op Participation

81

0

1

2

3

4

5

6

7

8

9

10

MS - Electrical Engineering MS - Industrial Engineering MS - Bioengineering MS - Chemical Engineering MS - Civil Engineering MS - Information Science MS - Mechanical Engineering PhD - Civil Engineering PhD - Computer Engineering PhD - Bioengineering PhD - Chemical Engineering PhD - Electrical Engineering PhD - Industrial Engineering PhD - Materials Science & Engineering PhD - Mechanical Engineering TOTAL

2010-2011 1 1 0 0 0 0 0 1 0 0 0 0 0 0 0 3

2011-2012 3 5 0 0 1 1 0 3 1 0 0 0 0 0 0 14

2012-2013 3 9 0 0 2 7 3 1 6 0 0 0 0 0 0 31

2013-2014 1 9 0 0 1 5 6 1 3 0 0 0 0 1 0 27

Co-op Graduate Students 2013-2014

2013-2014

2012-2013

2011-2012

2010-2011

Four-year Co-op Participation*

SWANSON SCHOOL OF ENGINEERING 2013 Student Placement Department Bioengineering

100%

Chemical and Petroleum Engineering

98%

Civil and Environmental Engineering

97%

Computer Engineering

100%

Electrical Engineering

100%

Engineering Physics

100%

Engineering Science

100%

Industrial Engineering

97%

Materials Science and Engineering Mechanical Engineering

100% 96%

2013-14 Tuition Rates Term

Credit

$8,662

$721

Out-of-State Undergraduate

$14,339

$1,194

In-State Graduate

$11,458

$1,088

Out-of-State Graduate

$18,764

$1,776

Full Time

Part Time

$85

$0

$175

$100

Security, Safety & Transportation Fee:

$90

$90

Student Activity Fee: Undergraduate Graduate

$80 $20

$24 $10

In-State Undergraduate

Fees and Expenses

Wellness Fee Computing & Network Service Fee

82

Degrees and Certificates Conferred (School year ending April) Department/Program BACCALAUREATE Bioengineering Chemical Engineering Civil Engineering Computer Engineering Electrical Engineering Engineering Physics Engineering Science Industrial Engineering Materials Science and Engineering Mechanical Engineering TOTAL CERTIFICATE Civil Engineering and Architectural Studies Energy Resource Utilization Engineering for Humanity Fessenden Honors in Engineering Health Systems Engineering International Engineering Studies Mining Engineering Nuclear Engineering Product Realization Supply Chain Management Sustainable Engineering MASTER OF SCIENCE Bioengineering Chemical Engineering Civil Engineering Computer Engineering Electrical Engineering Industrial Engineering Materials Science and Engineering Mechanical Engineering Nuclear Engineering Petroleum Engineering TOTAL CERTIFICATE Clinical Cardiovascular Electric Power Engineering Engineering and Technology Management Health Systems Engineering Medical Product Innovation Mining Engineering Nuclear Engineering DOCTORATE Bioengineering Chemical Engineering Civil Engineering Computer Engineering Electrical Engineering Industrial Engineering Materials Science and Engineering Mechanical Engineering TOTAL

2006

2007

2008

2009

2010

2011

2012

2013

2014

37 34 71 46 56 7 0 46 5 69 371

35 26 76 30 58 5 0 43 11 101 385

42 51 90 49 75 6 0 43 14 105 475

51 50 72 40 42 6 0 45 3 93 402

38 50 75 40 50 0 0 54 8 81 396

39 54 95 32 55 2 0 44 4 109 434

48 75 77 41 57 3 0 47 7 111 466

54 74 85 40 52 6 1 51 8 101 472

60 99 89 32 55 2 4 64 6 127 538

0 0 0 0 0 0 0 0 3 0 0

1 0 0 3 0 5 0 0 0 0 0

2 0 0 1 0 3 0 11 0 0 0

2 0 0 6 0 0 1 25 1 0 0

0 0 0 4 0 2 0 38 1 0 0

0 0 0 2 0 3 4 61 0 0 5

0 0 1 5 0 3 5 70 1 0 1

1 0 0 4 0 3 6 64 1 2 2

1 0 2 0 0 1 10 66 1 2 0

18 9 29 0 18 24 5 13 0 0 116

15 3 14 0 23 22 4 11 0 0 92

16 2 26 2 18 24 6 23 0 0 117

18 1 18 0 15 20 3 18 0 0 93

11 2 17 0 30 36 8 28 0 0 132

17 4 42 1 27 33 5 35 0 1 165

9 1 39 0 50 35 6 43 0 6 189

9 15 26 0 31 24 9 53 2 7 176

9 3 52 0 45 54 6 60 6 6 241

0 0 0 0 0 0 0

0 0 0 0 0 0 0

0 0 1 0 0 0 0

0 0 0 0 0 0 2

0 0 0 0 0 0 2

0 0 0 0 0 4 15

0 0 2 0 0 3 21

0 0 0 0 0 1 18

0 0 0 4 1 2 14

10 8 5 0 7 7 4 8 49

14 9 3 0 6 4 4 4 44

13 10 2 0 4 7 0 1 37

20 5 0 0 8 7 3 5 48

21 5 1 0 11 2 3 9 52

23 5 10 0 8 5 1 5 57

15 7 6 1 7 6 4 4 50

10 9 9 1 9 6 7 7 58

19 5 15 3 7 4 8 8 69

83

Graduate Roster: 2013-14 August - 2013

ENGINEERING SCIENCE

BACHELOR OF SCIENCE

None

CERTIFICATE ENGINEERING FOR HUMANITY

BIOENGINEERING

INDUSTRIAL ENGINEERING

None

Justin Craig Becker Cedric W. Brown, Jr. Stephen Paul Canton Hailey Ann Fuller Michelle Renee Montgomery Brandon Robert White

Adam Winton Chandler

CERTIFICATE FESSENDEN HONORS IN ENGINEERING PROGRAM

CHEMICAL ENGINEERING

MECHANICAL ENGINEERING

Ethan Andrew Beardsley Amber L. Cesario Joel A. Cook Daniel Robert Meier John Roy Rodman IV Michael Man Pou Sio

Ari E. Abraham Samuel John Algeo Joseph Alexander Arrow Alexa D. Becker Andrew Blandino Christopher J. Bohn Zachary Wayne Clark Matthew Criado Brandon Davies-Sekle Matthew Mark Degonish Matthew S. Dilulio Andrew J. Frank Ryan E. Hill Abigail Kelly Kender Richard John Langlois William Michael McLaughlin Karl D. Olsheski Stephen Monroe O'Neal Gary S. Rethage Ryan A. Richter Daniel Charles Rogers IV Jonathan Robert Rothrock John Michael Rovinsky Eric M. Ruth Andrew R. Smith Glenn Spalding, Jr. Jordan Alexandra Streussnig Brandon J. Tomasic Alexander Valentino

CIVIL ENGINEERING Brian David Blacka Marshall Davis Zachary M. Hein COMPUTER ENGINEERING Sean M. Cardello Joshua Haidar Jones Benjamin Paul Long Christopher John Lukas Caitlyn A. Oleykowski Christopher Edward Paskie Justin James Samstag Daniel Charles Seskey ELECTRICAL ENGINEERING Benjamin Lawrence Baum Alexander Thomson Cantarera Matthew D. Cimino Matthew Alan Fink John Michael Gerlowski Akshay Hari Eric L. Hoover Jason E. Mileham Paul Edward Monroe Jonathan Chad Robochik Huailei Wang

MATERIALS SCIENCE AND ENGINEERING

None None

CERTIFICATE CIVIL ENGINEERING AND ARCHITECTURAL STUDIES

CERTIFICATE INTERNATIONAL ENGINEERING STUDIES None CERTIFICATE MINING ENGINEERING Matthew Criado CERTIFICATE NUCLEAR ENGINEERING Samuel John Algeo Andrew J. Frank Ryan E. Hill Christopher John Lukas Karl D. Olsheski Jonathan Robert Rothrock Jordan Alexandra Streussnig Brandon J. Tomasic Alexander Valentino CERTIFICATE PRODUCT REALIZATION None CERTIFICATE SUPPLY CHAIN MANAGEMENT None CERTIFICATE SUSTAINABLE ENGINEERING

None None

ENGINEERING PHYSICS

CERTIFICATE ENERGY RESOURCES UTILIZATION

None

None

MASTER OF SCIENCE BIOENGINEERING Sarah Anne Luffy

84

Sidhartha Mohapatra Christopher D. Saylor

Lindsay Wright

MATERIALS SCIENCE AND ENGINEERING

PETROLEUM ENGINEERING CHEMICAL ENGINEERING Gun Kositchaiwat Daniel DeSantis CIVIL ENGINEERING Luyao Cai Huiqi Deng Leanna Frances Seminsky Christanto Yudha Saputra Sukamta Weijin Wang ELECTRICAL ENGINEERING Eric J. Biel Denis D. Cunningham Iva Jestrovic Xiao Li Alexander Michael Schaefer Yirong Zhao INDUSTRIAL ENGINEERING Jeffrey Francis Harding Ashlee Lynn Miller Marzyeh Moradi Chimeziri E. Onyewu Erhun Özkan Olzhas Shugayev Haoyuan Zhong

CERTIFICATE NUCLEAR ENGINEERING Mark Andrew Daniel Jonathan Charles Durfee Jeffrey Michael Levy Margaret K. Merkel Brandon James Momeyer David M. Sumego Todd Andrew Sutton Daniel John Wilson

MECHANICAL ENGINEERING Yao Fu Patrick H. Pisciuneri Ursula Therese Zangrilli December – 2013 BACHELOR OF SCIENCE

DOCTOR OF PHILOSOPHY BIOENGINEERING BIOENGINEERING Jonathan Stephen Akins Kevin Michael Bell Maria Jaramillo Jessica Lindsay Lo Surdo Nathaniel Thomas Remlinger Lynn Anne Worobey CHEMICAL ENGINEERING Umang Vijay Desai Ping Li Michelle D. Najera

MECHANICAL ENGINEERING CIVIL ENGINEERING Robert Charles Armstrong, Jr. Mark Andrew Daniel David Cole DiBasilio Jonathan Charles Durfee John B. Erinc Elizabeth Olczak Eury Jason Nicholas Green Lu Han David Michael Hecht Marc Steven Hoffman Douglas Tyler Landfried Jeffrey Michael Levy William Thomas Frank Lusk Scott Mang Brandon James Momeyer Benjamin Joseph Rakestraw Ashley Marie Rothwell Christopher Michael Shelton Jevaughn A. Spencer David M. Sumego Todd Andrew Sutton Matthew William Thomas Konstantin Tourkov IV Lin Wei

Sang Hyun Byun Zhiyao Duan Giovanni Giuseppe Facco Anthony Domenic Finoli Curtis James Larimer

Abdulaziz Banawi Ronald Roger Gutierrez Wenshi Liu Jorge Alejandro Mendoza Rizo Michael James Richard David V. P. Sanchez Cassandra Lee Thiel Jia Wu ELECTRICAL ENGINEERING Ibrahem Essa Atawi Siwapon Srisonphan INDUSTRIAL ENGINEERING John Andrew Flory Serdar Karademir Amin Khademi

85

Marc David Foster Andrew Clement George Mengxue Li Yolandi Van Der Merwe CHEMICAL ENGINEERING Rodney Shae Andrews Quinton Spencer Armitage Bernard W. Blore Benjamin James Bucior Jacob T. Bullock Brittany Angelica Chambers Alison Mae Forbrich Jacob David George Devin Andrew Glace Melissa Marie Hanigosky Christian Richard Harding Joseph Edward Hilson, Jr. Karen Alison Kaminsky James Daniel Knapp, Jr. Jared M. Kolwyck Corey Adam Koscho Grace Elizabeth Kuczma Stephanie Lynne Kuniak Ian Alexander Lynch Joanna Marie Male Steven Allen Marusic Joshua Ray Maskrey Jonathan H. Meyers Jesse Rae Minuto Brian Michael Moeller Kelly Jo Mornak Angela J. Nepa Khang Duy Nguyen Michael D. Painter Matthew J. Pincus Gerald Alexander Richardson Tyler Ray Riggle

Charles W. Spyres Evan Rogers Stahl Brian M. Tackett Piyathip Thanapisitikul Haotian Wang Kayla L. Williams Lindsey Marie Wilson Jay Elliott Stodghill Young CIVIL ENGINEERING Andrew M. Bayer James P. Begley Adam Richard Celmo Natalie Victoria Celmo Kristen Berkeley Chatot Trae L. Deri Edward Hugh Doyle III Alaina Marguerite Elias Thomas G. Forsyth V Eric F. Foster Christopher Thomas Fox Kyle Freehart Joseph W. Garofalo Vincent J. Garofalo David Andrew Gogol Matthew J. Grasinger Kevin Hendrickson Jonathan M. Hewko Brian W. Hone Matthew David Huddleston Frederick Arthur Huebner III Alexis C. Johnson Amanda M. Kelly Peter F. Kraus Jesse Michael Lazzaro Anthony Paul Lester Jason R. Loebig Gordon Samuel Louderback Meghan Ann McCutcheon Tyler J. Michak Joshua E. Munzek Rodi Murad Claire Elizabeth Murphy Griffin R. Novie Shane Joseph O'Connor Jonathan K. Ou Jacob Paul Presken Timothy Joseph Ray Ryan R. Richard Patrick F. Ryan Steven A. Saksa William Joseph Smith Benjamin Sorek Krista Marie Stippelmans Brandon Paul Strahler Alexander James Tadla Corey Woloschin Brik Ryan Zivkovich

COMPUTER ENGINEERING Cameron N. Dashti Marcus Hayes Andrew Head Kyra F. Lee Shane Lester Charles Sam Musso III Nikolas Bruce Parshook Zachary M. Shelhamer Calvin Albertus Souders IV ELECTRICAL ENGINEERING Brent K. Baade Tyrone A. Ferguson Marc David Foster James Nicholas Grabiak Brent Joseph Hummel Andrea M. Isola Ching Li Jeffrey Charles Logsdon Michael P. McKibbin Leora Penina Skaist Traci Chaz Smith Ian Thomas Steck Michael J. Varone ENGINEERING PHYSICS None ENGINEERING SCIENCE Daniel J. Sonita INDUSTRIAL ENGINEERING Bryan Daniel Abbott Eric Taylor Almes Lisa A. Buono Kate M. Cloonan Cullen M. Conner Nathan Cybak Rachael Catherine Dalecki Vanessa Marie Edwards Katrina Louise Gabryluk Erin Garrigan Jonah D. Greenberg Brian Ko Jessica Nicole Litten Dominic J. Malloy Kellen Christopher McLaughlin Christopher Ryan Murrett Allison M. Robinson Taylor Rose Robinson Christopher John Santangelo Sarah Scherm Adam Theodore Schiowitz Daniel Jason Schwartz 86

Nathan J. Stockton Alexis Nicole Vitsas Loc Ba Vu Courtney Joan Waters Evan John Weinbrenner Liza Jayne Whipkey Shane Louis Wigton Colin Alexander Williams Brandon W. Woodward Lin Wu Anthony Emanuel Xenakis MATERIALS SCIENCE AND ENGINEERING None MECHANICAL ENGINEERING Nicole Ijeoma Gloria Allen Matthew William Andromalos Justin Keith Black Charles James Bockstoce Matthew Ryan Bogolin Edward Thomas Brady, Jr. Robert Leslie Cairns Lance Edward Cariss Fangzhou Cheng Amber Nicole Cochran Geoffrey Craychee Christopher Alan Dechmerowski Sean Michael Delserro Andrew Joseph DiFonso Matthew Mark Goodwill Nicholas A. Halbert-Brooks Thomas John Heinzman III Robert Joseph Herman III Derek Robert Hobbins Aric Brandon Hudson Quinn Douglas Killough Paul Jeffrey Kristo John Thomas Maciupa Robert Timothy Maier Michael Robert Martys Eric Joseph Matthews Gregory Alan Meyer Jeremy William Murphy Steven D. Mushock Nicholas Javier Ortega Ethan Gabriel Pampena Aaron M. Polanski Aryeh Herschel Rosenberg Elisha Hamilton Sanger Michael John Schmid David Andrew Schreiber Harpreet Singh Sembhi Kyle Loren Sherry Kevin Arthur Smyth George John Vafeas Stephen E. Watkins

Robert Lee Younger CERTIFICATE CIVIL ENGINEERING AND ARCHITECTURAL STUDIES None CERTIFICATE ENERGY RESOURCES UTILIZATION None

Eric Joseph Matthews Gregory Alan Meyer Jonathan H. Meyers Michael D. Painter Ethan Gabriel Pampena Aaron M. Polanski Gerald Alexander Richardson Tyler Ray Riggle Harpreet Singh Sembhi George John Vafeas Stephen E. Watkins CERTIFICATE PRODUCT REALIZATION

CERTIFICATE ENGINEERING FOR HUMANITY

None

None

CERTIFICATE SUPPLY CHAIN MANAGEMENT

CERTIFICATE FESSENDEN HONORS IN ENGINEERING PROGRAM

Christopher John Santangelo Alexis Nicole Vitsas

Xinyi Yang Chengguo Ye John William Zacheiss Xin Xin Zhang ELECTRICAL ENGINEERING Yiwen Fan Noah S. Gerber Rui Hou Jonathan D. Kurtz Jing Lin Zheng Liu Alexandre Millecamps Michael B. Price Oreste Vincent Scioscia, Jr. Rahul Sandeep Shah Cheng Jui Tu Haitao Yang Wang Yao Yao Yao Xiangyu Zhang INDUSTRIAL ENGINEERING

None CERTIFICATE INTERNATIONAL ENGINEERING STUDIES

CERTIFICATE SUSTAINABLE ENGINEERING None MASTER OF SCIENCE

Natalie Victoria Celmo BIOENGINEERING CERTIFICATE MINING ENGINEERING Trae L. Deri Jonathan D. Fennell William Joseph Smith CERTIFICATE NUCLEAR ENGINEERING

Shubham Debnath Kevin Staton CHEMICAL ENGINEERING Ioana Svetoslavova Iolova Harrison J. Katz CIVIL ENGINEERING

Rodney Shae Andrews Quinton Spencer Armitage Bernard W. Blore Edward Thomas Brady, Jr. Geoffrey Craychee Andrew Joseph DiFonso Eric F. Foster Devin Andrew Glace Matthew Mark Goodwill Christian Richard Harding Thomas John Heinzman III Aric Brandon Hudson Paul Jeffrey Kristo Grace Elizabeth Kuczma John Thomas Maciupa Robert Timothy Maier Steven Allen Marusic Joshua Ray Maskrey

Mashaiel A. Alnifay Xue Ao Katelyn Rose Bonn Jeremy Clay Cheatwood Patrick A. Costello Yating Gao Thomas J. Gerlowski Han Hong Ran Huang Jiantao Liu Matthew Jeffrey McCabe Kaitlin Beth Mininger Lindsay Marie Myers Joseph S. Novotny Maureen Angela Olinzock Prachi Neelam Shah Cesar Augusto Simon 87

Arpit Ajmani Ramzi Alahmadi Logan S. Baker Badr K. Binrabba Minghao Cao Yu-Chung Chen Cheng Du Haosen Gao Sa Guo Haoxian He Liangyi Hu Lisha Jian Wutong Jiang Weichen Li Sunghoon Lim Xiaowei Lu Gaurang A. Makadia Sevnaz Nourollahi Sean Christopher Siegwart Ian Sullivan Wei-Ting Tai Pin-Yen Tseng Zihan Wang Sharon Ann Warner Jinming Yan Xiaoya Ye Xing Yin Lizhen Zhang Jinxin Zhao Wen Zhao Shiming Zhou MECHANICAL ENGINEERING Troy Allan Caldwell

Zhe Lun Chen Michael J. Durka Scott Edward Fortune Austen David Fradeneck Dennis Andrew Heglund Shibo Li Teng Li Marla Liptak Nicholas J. List Nicholas R. Miller Ryan Michael Soncini Fei Ye Xiaowen Zhang

Bo Zhao ELECTRICAL ENGINEERING Zhenyu Sun INDUSTRIAL ENGINEERING None MATERIALS SCIENCE AND ENGINEERING None

NUCLEAR ENGINEERING MECHANICAL ENGINEERING Craig Matthew Montgomery Cory A. Stansbury Carmen David Teolis PETROLEUM ENGINEERING Chen Guo Shuyuan Luo Trishank Nandakumar

Justin C. DeBlois Andrew Stephen Eastman Seyed Amin Mohaghegh-Motlagh Konstantin Victorovich Redkin Chenzhi Wang April – 2014 BACHELOR OF SCIENCE

CERTIFICATE NUCLEAR ENGINEERING Scott Edward Fortune Dennis Andrew Heglund Michael B. Price DOCTOR OF PHILOSOPHY BIOENGINEERING Nicolas Alexander Alba Allison Corinne Bean Christopher Arthur Carruthers Jason Michael Godlove James Arthur Hokanson Christopher J. Medberry Donald Paul Taylor CHEMICAL ENGINEERING None CIVIL ENGINEERING Christian Edson Frias Xiangyu Luo Mark J. Magalotti Elisabetta Pistone Yi Xu COMPUTER ENGINEERING Yong Li

BIOENGINEERING Devon Albert Ryan M. Begun Emmeline LeGendre Blanchard Jake Robert Bosin Greta Rosemary Brecheisen Juliana Jaclyn Bursic Connie Chen Emma C. Cinibulk Cecilia Anne Collins James Ronald Day Kevin Andrew Day Jenna Lynn Dziki Hunter S. Eason Jillian Kay Gorski Kevin Richard Gribowicz Zhannetta V. Gugel Lauren Ann Hapach Tyler Joseph Hughes Austin John Kamykowski Kareem H. Kandil Ahmed Ismail Kashkoush Joseph C. Kennedy Alicia Lynn Kolling Paul Steven Kukunas Brandon G. Lee Kori Macdonald Caitlyn Elizabeth McCann Ryan J. Mooney Maria Amelia Munsch Grace Ellen Owens Aniket Chandulal Patel 88

Deanna Catherine Pelkey Anthony S. Pulleo Michael Joseph Randazzo Rohit R. Rao Karuna N. Relwani Timo Roehrs Thomas William Rotella Nina D. Rudolph Gabrielle Francis Salazar Christopher J. Siviy Steven Glenn Sklar Hannah Marie Smith Ashley Smoots Dianna Rae Stuckey Timothy Nicholas Thompson Raymond James Van Ham Cynthia Wong Jennifer Lynn Yeager Linn Zhang CHEMICAL ENGINEERING Andrew Kolb Adam Ryan J. Badzgon William Reese Barrington Christine F. Bontempi Deren Jay Breitinger Sean A. Buckwalter Caitlyn Marie Conaway Can Cui Thomas Ryan Farrell Vincent Robert Gallo Brittany E. Givens Hannah M. Grace James David Hanna III Niklas Sten Hansson Joseph C. Hughes Joshua R. Hunt Steven Vincent Iasella Stephen Joseph Johnson Olubanke I. Kayode Benjamin Frederick Kuethe Merrill Lau Yung-Sen Lee Gerald Thomas McFarlin IV Luciana Fábregas Morone Shaun Michael Murray Christina Rose O'Donnell Michael A. Owens David William Palm David Edward Palmer II Jordan Xavier Poindexter Kyle Joshua Porter Zachary Kenneth Ramsey Jacob W. Raney Cristian Alan Riley Matthew Lee Roadarmel Martin Daniel Roberts Kerry Michael Rogy Devon M. Schenker

Morgan E. Sharick Ian Rutherford Smith Connor Michael Spielman David James Stasa Joshua Laurence Szurley Zachariah Granville Tabler Alexander Tanner Taylor John Evan Tkach Ryan Scott Tonks Kurt Ian Twyman Matthew Douglas Urich Sean Christofer Vins Haochen Frank Xu Mitchell Yudes Nicholas Joseph Zukowski

Sarah Elizabeth Bunke Steven Francis Comer Elizabeth A. Donahoe Jason Daniel Furente Daniel R. Hartman Michael P. Hearing Zachary A. Koopmans Sergei V. Kudrytski Ke Luo Zachary A. Olawski Zachary Christopher Piekut Andrew W. Schultz Derrick Kyle Ward John White, Jr. ELECTRICAL ENGINEERING

CIVIL ENGINEERING Caleb Scott Angle Michael Arvid Barnes Nicole Bonomo Stephen Edward Breski Blaise Andrew Bucha Michael R. Carretta Morgan Elaine Castle Michael R. Cinciripini John E. Citrone, Jr. Neal James Daley John William DeSantis Jeffrey T. DeWalt Kevin Spencer Edwards Jason Bart Filer Erin Colleen Gray Jordan Paul Hoellman Philip Jon Karanovich Brian T. Krell Christopher Louis Mautino Grace Anne Meloy Matthew David Morrone Jesse Hill Newman-Evans William T. Osthoff Zachary Michael Patterson Ronald Patrick Picarsic Michael Eliot Poole Noel L. Rangel Shannon W. Ritter Angus B. Robertson II Anthony Salesi Jean Luk Nganji Sebudandi Thomas S. Sevacko Julie A. Shearer Jesse Joseph Wagner Joshua Michael Wenk Matthew K. Weschler Jacob A. Yatsko Robert J. Zupan, Jr. COMPUTER ENGINEERING

Sharifa Abbott Richard McConnell Addison Maxim Campolo Brian M. Cavanaugh Gregory Mark Fowkes Robert William Gleba Alice M. Haas Joseph Edward Jensen, Jr. Benjamin James Kisley Leon Lai John Paul Latta Andrew William Lichauer Robert Eldon McCartney IV Sovay Lenore McGalliard Garrett Nicholas McIntosh Bryan H. Ocampo Mathew Pagliassotti Niall Brantley Pascal Arvind Prasadan Andrew J. Seel Hongyao Shi David A. Spano David Anthony Steiner Dahirou Tall John Teoli Scott W. Thompson Darrah Lane Treleaven Brad K. Van Fleet Stephen Michael Whaite Jason A. Wilson Katie Ann Young ENGINEERING PHYSICS Joseph Peter Kozak Jorge Torres ENGINEERING SCIENCE James Christopher Kanui Dillon Thomas B. Nilson Christopher J. Roberts

Philip Logan Baird IV 89

INDUSTRIAL ENGINEERING Marco Dante Aletto William E. Bayer III Ethan Adrian Boyle Eric W. Budny Mark David Clifford, Jr. Andrew Brian Cockeram Stephen Michael Critharis Dylan Barry Davis Jeremy M. Dolan David John Eckman Ryan M. Gibson Jason Lyle Jobe Annie Elizabeth Jones Maryem Mabrouk Alexander James Majchrzak Thomas Carl Marcinkowski Michael R. Mele Julie Elizabeth Michelini Kayla Milewski Patrick Glen O'Donnell Deniz Oker Adam Zachary Olsen Michele Marie Reizine Taylor Christian Schubert Christopher Michael Sinback Sarah Elizabeth Songer Christopher William Stavrakos, Jr. Mitchell R. Usher Mark N. Weiner Zhe Zheng MATERIALS SCIENCE AND ENGINEERING Ryan Sulaman Bhagratti Jonathan Hyunmin Kim Qi Rong Caitlin Jane Sawyer Roger Craig Walker II Fangda Yu MECHANICAL ENGINEERING Kenechi Aretha Agbim Carlos Raul Arguero Anthony J. Balistreri John R. Bates II Tyler N. Boland Ezekiel Adzena Braun Anna Rachele Cantini Derek Anthony Carr Jacob J. Cunningham Justin Colby Daniels Jamie Elaine Dillaman Derek L. Dubois Robert T. Dupree Brian Egan Matthew R. Gargani

Sabrina George Benjamin David Goclano Joseph Dusan Grmusa Joshua Thomas Gyory Eric Lynn Holzer Kevin Wesley Hull Olumuyiwa Robert Iledare Insoo Kim George V. Kontogiannis Justin Andrew Lapinsky Kevin Laux Shiyi Li Jared S. Liebowitz Dominic John Little Samantha Jean Mallon Randall Jay Marchelletta Allison Gayle McCurdy Brendan Wheeler McKinley Marissa Nicole Meshanko Rachel Elizabeth Meyer Allison Marcelle Minkel Jonathan E. Mrockosky Carly E. Murcek Michael Paine Joseph Walter Parkinson Matthew D. Peters Patrick Daniel Reven Andrew George Rusinko, Jr. Kathryn Ann Saltsman Kumaresan Sandran Stanley A. Schurdak Benjamin Patrick Stein Lauren Theresa Stranick Sanjay Menon Suresh Taylor Nicole Terek Megan Elizabeth Tomko David James Uber George Leonidas Vassilaros Austin N. Will Xuekun Xie Jonathan Russell Young

Alex T. Dalla Piazza John William DeSantis Jamie Elaine Dillaman Patrick Daniel Reven CERTIFICATE NUCLEAR ENGINEERING Kenechi Aretha Agbim Caleb Scott Angle Deren Jay Breitinger Anna Rachele Cantini Brian Egan Sabrina George Benjamin David Goclano James David Hanna III Jordan Paul Hoellman Steven Vincent Iasella George V. Kontogiannis Justin Andrew Lapinsky Dominic John Little Samantha Jean Mallon Luciana Fรกbregas Morone Jonathan E. Mrockosky Christina Rose O'Donnell Joseph Walter Parkinson Kyle Joshua Porter Zachary Kenneth Ramsey David A. Spano David James Stasa Taylor Nicole Terek Megan Elizabeth Tomko David James Uber Roger Craig Walker II Austin N. Will Jonathan Russell Young

Stephanie Marie Chechak Renwick Lynn D'Souza Zhou Fan Matthew A. Geary Amanda Jean Gladowski Nash Joseph Golon Zhanpeng Hao Patrick Gregory Himes, Jr. Richard D. Hinman Yuan Hu Michael B. Keener Le Lu Samuel George Luffy Kevin Lyons Adarsh Menon Lucas James Mignogna Dominic Michael Petrazio James Arnold Smith IV Maxwell Alexander Todd Yipei Wen Yubo Wu Pei Zhang Enze Zhao ELECTRICAL ENGINEERING

CERTIFICATE CIVIL ENGINEERING AND ARCHITECTURAL STUDIES

MASTER OF SCIENCE

Chris J. Hazel

Justin Michael Haney Martha V. Merrill William M. Rout Matthew Leo Sundermann

Hashim A. Al Hassan Jessica Marie Burger Heyuxuan Chen Yuanjun Dai David Brian Dgien Peter Andrew Dunham Enes Eken Bingyang Hu Xin Huang Rohith Kashyap John F. Kilcoyne Rakshit Kota Ping Lang Ming Lei Beiye Liu Xinchao Liu Weiqing Lu Nathan Christopher Rabenold Ankita Sharma Wesley Lowell Terek Junxiang Wu Jin Yan Zhenzhen Yang Zhao Zhang

CHEMICAL ENGINEERING

INDUSTRIAL ENGINEERING

None

Emily Marie Basara Soongeun Cha Michael P. Drudy Nazanin Esmaili Zhou Fang Melanie B. Hazeley Jacquelyn Lee Marsh

CERTIFICATE ENGINEERING FOR HUMANITY Aniket Chandulal Patel Karuna N. Relwani CERTIFICATE MINING ENGINEERING Michael Arvid Barnes Blaise Andrew Bucha

CERTIFICATE PRODUCT REALIZATION Kenechi Aretha Agbim

BIOENGINEERING

CIVIL ENGINEERING Joshua Michael Ague Yousef Jubarh J. Alharbi Thomas J. Barbera 90

MATERIALS SCIENCE AND ENGINEERING

Jennifer L. Morton Qianqian Song Christina Marie Sullivan Jiangshan Sun Ramazan Unlu Jian Yu Zhibo Zeng Xuetong Zhai Chen Zhang

Qianqian Song Xuetong Zhai Chen Zhang

MATERIALS SCIENCE AND ENGINEERING

CERTIFICATE MINING ENGINEERING

Kailin Fu Yu Huang Patrick John Moore Rita Nalin Patel Ryan Wesley Read Yu Zhou

Stephanie Marie Chechak Lucas James Mignogna

CERTIFICATE MEDICAL PRODUCT INNOVATION

Bo Ding Xu Liu Xiaodan Wu MECHANICAL ENGINEERING

William M. Rout None

MECHANICAL ENGINEERING Shuai Cai Thomas M. Calko Amanda Jean Chaves Todd Richard Githens Andrew D. Iams Christopher Williams Lyons Mark Andre Moenssens Cherie Jane Paugh Siwei Peng Jonathan Wakeman Salmans Danni Shan Steven Michael Smith Matthew R. Sprague Angela Fay Stover Yingying Sun Olga Vladimirovna Vedernikova Daniel John Wilson Gregory Witt Lan Xing Ruifeng Zhang Yi Zhang

CERTIFICATE NUCLEAR ENGINEERING Cherie Jane Paugh Nicholas Charles Piplica Angela Fay Stover DOCTOR OF PHILOSOPHY BIOENGINEERING Kwang Eun Kim Meenal J. Patel Britta Mary Rauck Cassandra L. Weaver Matthew T. Wolf Joshua Ryan Woolley CHEMICAL ENGINEERING Saurabh Kiran Bhavsar Karan Sandeep Kadakia CIVIL ENGINEERING Manik Barman Feng Mu

NUCLEAR ENGINEERING

COMPUTER ENGINEERING

Wade L. Cribbs, Jr. Nicholas Charles Piplica Ryan Wesley Read

Lin Li

PETROLEUM ENGINEERING

Azime Can-Cimino Jiyong Huang Robert John Kerestes Raghav Khanna

Kirstie Alesha Mills Taylor James O'Brien CERTIFICATE HEALTHCARE SYSTEMS ENGINEERING

ELECTRICAL ENGINEERING

INDUSTRIAL ENGINEERING Sepehr Nemati Proon

Zhou Fang 91

Swanson School of Engineering Faculty Headcount* Fall 2013 Tenured

Tenure Stream

Non-Tenured

Joint Appts.**

Total

Bio

18

4

9

31

83

ChE

16

5

6

27

5

CEE

9

8

3

20

0

EE

15

4

4

23

5

IE

10

2

3

15

0

MEMS

22

6

4

32

1

90

29

29

148

94

TOTAL

*Excludes Research, Visiting and Part-Time Faculty **Joint appointments are part-time

92

Faculty Profiles BIOENGINEERING Steve Abramowitch Assistant Professor, Department of Bioengineering (Primary), Department of Obstetrics, Gynecology, and Reproductive Sciences (Secondary). PhD (Bioengineering), University of Pittsburgh (2004). Dr. Abramowitch serves as the Co-Director of the Tissue Mechanics laboratory in the Musculoskeletal Research Center. His research aims to elucidate the mechanisms of pelvic floor failure in women with pelvic organ prolapse and enhance maternal tissue healing following obstetric injury utilizing functional tissue engineering approaches.

Howard Aizenstein Associate Professor, Psychiatry and Bioengineering; Director of the Geriatric Psychiatry Neuroimaging Laboratory. PhD (Computer Science), 1993, and MD, 1995, University of Illinois at Urbana-Champaign.

Dr. Aizensteinâ&#x20AC;&#x2122;s research interests focus on structural and functional brain MRI in elderly individuals with cognitive impairment and mood disorders. His research projects integrate the fields of neuroscience, computer science, software engineering and clinical aspects of neuroimaging and brain mapping. Recent projects in the lab include developing automated neuroimage registration and segmentation routines, surface modeling of brain structures, and time-series of functional MRI data. In more clinically-oriented projects, imaging approaches are being used to investigate therapeutic response to antidepressive drugs in late-life depression.

Alejandro Almarza Associate Professor, Department of Oral Biology and Bioengineering; Director of the TMJ laboratories.

PhD (Bioengineering), Rice University, 2005. Research interests include: (1) Novel tissue engineering techniques, such as extracellular matrix scaffolds and progenitor cells, for fibrocartilage tissue engineering applications; (2) Quantification of the normal biomechanical properties and joint mechanics/motion of the Temporomandibular Joint (TMJ) for determining diseased states .

Carolyn J. Anderson Professor, Department of Radiology (Primary), Department of Bioengineering (secondary), Department of Pharmacology and Chemical Biology (secondary). PhD (Inorganic Chemistry), Florida State University (1990). Dr. Anderson is the Director of the Molecular Imaging Laboratory. Her research aims to develop radiopharmaceuticals for PET imaging of various diseases and conditions, including cancer, inflammation and tuberculosis.

James Antaki James F. Antaki, PhD is a Professor of Biomedical Engineering at Carnegie Mellon University with a courtesy appointment in Computer Science, Mechanical Engineering, Electrical and Computer Engineering, and adjunct appointments in the departments of Surgery and Bioengineering at the University of Pittsburgh.

He received a BS in Mechanical and Electrical Engineering from Rensselaer Polytechnic Institute (1985) and a PhD in Mechanical Engineering from the University of Pittsburgh (1991). Over the past 26 years, Prof. Antaki has conducted research in the field of mechanical circulatory assistance, and has contributed to the development of several heart-assist devices used clinically, including the Heartmate-II, Novacor, Ventrassist, TandemHeart, and Levacor. In 1997, his team completed the development of the worldâ&#x20AC;&#x2122;s first magnetically levitated axial-flow blood pump, the Streamliner. Dr. Antaki holds over 22 issued patents (8 pending), related to artificial organs, feedback control, medical diagnostics, harmonica technology, and

93

other fields. His current research involves the development of circulatory support systems for children, decision-support technology for end-stage heart failure, a device for assisting women and their doctors quantify breast lesions, a blood purification system for treating malaria, a point of care diagnostic test for managing heart failure, and a system for performing aqueous immersion surgery. He currently teaches a course titled, “Inventive Problem Solving in Biomedical Engineering” that focuses on the ideation stages of medical innovation. He is also developing methods to improve the involvement of physicians, nurses, and patients in process of innovation and design of new medical devices.

Mohammad H. Ataai William Kepler Whiteford Professor, Chemical & Petroleum Engineering and Bioengineering. PhD (Chemical Engineering), Cornell University, 1986. Dr. Ataai's research interests include bioprocess engineering, large-scale cell culture and fermentation, production and purification of viral vectors for gene therapy applications, protein purification, metabolic engineering, cellular metabolism, and physiology.

Stephen F. Badylak Professor. Departments of Surgery and Bioengineering; Deputy Director of the McGowan Institute for Regenerative Medicine. DVM, Purdue University; PhD (Anatomic Pathology), Purdue University, 1981, and graduated with highest honors with an MD from Indiana University Medical School, 1985. Dr. Badylak has practiced both veterinary and human medicine. Dr. Badylak began his academic career at Purdue University in 1983, and subsequently held a variety of positions including service as the Director of the Hillenbrand Biomedical Engineering Center from 1995-1998. Dr. Badylak served as the Head Team Physician for the Athletic Department for 16 years (1985-2001). Dr. Badylak holds over 50 U.S. patents, 200 patents worldwide, has authored more than 225 scientific publications and 20 book chapters. He has served as the Chair of the Study Section for the Small Business Innovative Research (SBIR) at the National Institutes of Health (NIH), and as chair of the Bioengineering, Technology, and Surgical Sciences (BTSS) Study Section at NIH. Dr. Badylak is now a member of the College of Scientific Reviewers for NIH. Dr. Badylak has either chaired or been a member of the Scientific Advisory Board to several major medical device companies. Dr. Badylak is a Fellow of the American Institute for Medical and Biological Engineering, a charter member of the Tissue Engineering Society International, and currently president of the Tissue Engineering Regenerative Medicine International Society (TERMIS). He is also a member of the Society for Biomaterials. Dr. Badylak is the Associate Editor for Tissue Engineering for the journal Cells, Tissues, Organs, and serves on the editorial board of several other journals. Dr. Badylak’s major research interests include: Tissue Engineering and Regenerative Medicine; Biomaterials and Biomaterial/Tissue interactions; Developmental Biology and its Relationship to Regenerative Medicine; Relationship of the Innate Immune Response to Tissue Regeneration; Biomedical Engineering as it Relates to Device Development and Biomaterials; and Clinical Translation of Regenerative Medicine.

Kyong Tae Bae Professor and Chairman of Radiology, Professor of Bioengineering. MD, University of Chicago; PhD (Bioengineering), University of Pennsylvania. Dr. Bae is a radiologist and imaging scientist and has extensive experience and publications in computer-aided diagnosis, image segmentation and quantification from radiologic images. He is also the Director of the Imaging Biomarker Lab in the Department of Radiology. In addition to clinical radiology practice in CT and MRI, Dr. Bae has an interest in applying computer and image processing technology to advance clinical translational and imaging biomarker research in a wide range of diseases including polycystic kidney disease, pulmonary embolism, emphysema, osteoarthritis, lung cancer, prostate cancer, breast cancer, Parkinson’s disease, brain tumor perfusion, multiple sclerosis, spine, eye, and liver. Dr. Bae’s lab specializes in developing and analyzing morphological and functional imaging biomarkers from CT, clinical and high-field MR images. Dr. Bae joined the University of Pittsburgh in 2006 as a professor from the Mallinckrodt Institute of Radiology at Washington University in St Louis, where he was a tenured associate professor of radiology and bioengineering.

94

Mingfeng Bai Assistant Professor, Department of Radiology (Primary) and Department of Bioengineering (Secondary).

PhD (Chemistry), Vanderbilt University (2007). His research is focused on the development and in vivo evaluation of targeted molecular agents for imaging and phototherapy.

Carey Balaban Professor, Otolaryngology, Neurobiology, Communication Sciences & Disorders and Bioengineering.

Director, Center for National Preparedness. PhD (Anatomy), University of Chicago, 1979. Anatomy, neurophysiology and neurochemistry of vestibular function in normal and pathological conditions (e.g., disease and mild traumatic brain injury) are primary focus areas of Dr. Balaban’s research. He also works in the psychophysics of pain and participates in translational applications of our basic research to nascent neurotechnologies in cyber security, homeland security and national defense. Recent efforts have included development of mass spectrometric histological imaging methods with colleagues at NIDA and the corporate sector.

Ipsita Banerjee Assistant Professor, Chemical and Petroleum Engineering and Bioengineering, PhD (Chemical Engineering) Rutgers University, 2005. She completed her postdoctoral research in biomedical engineering from Harvard Medical School in 2008. Dr Banerjee's research interests include stem cell differentiation, tissue and organ engineering, systems biology, signaling pathway modeling. She is interested in determining the signaling pathway interactions controlling the directed differentiation of embryonic stem cells to pancreatic lineage. She is also working towards regenerating a whole-organ pancreas from pluripotent stem cells.

Aaron Batista Assistant Professor, Department of Bioengineering. PhD (Computation and Neural Systems), California Institute of Technology, 1999. Postdoctoral research, Stanford University 1999 - 2007, Dr. Batista studies the neural circuits that underlie sensory-motor control and learning. One application of this research is to improve neural prostheses: technologies that can restore motor function to paralyzed individuals by extracting movement command signals from the cerebral cortex.

Eric Beckman Eric Beckman received his BS in chemical engineering from MIT in 1980, and a PhD in polymer science from the University of Massachusetts in 1988. Dr. Beckman assumed his faculty position at the University of Pittsburgh in 1989, was promoted to associate professor in 1994, and full professor in 1997. He received a Young Investigator Award from the National Science Foundation in 1992, and the Presidential Green Chemistry Award in 2002. He previously served as Associate Dean for Research for the School of Engineering and Chairman of Chemical Engineering. In 2003, Dr. Beckman co-founded the Mascaro Center for Sustainable Innovation, a school of engineering institute that examines the design of more sustainable infrastructure. In 2005, he co-founded Cohera Medical Inc. to commercialize surgical adhesive technology developed at the University. Dr. Beckman took an entrepreneurial leave of absence from the University in 2007-2009 to help move the products to market. Dr. Beckman’s research group examines the use of molecular design to solve problems in green product formulation and in the design of materials for use in tissue engineering. He has published over 175 papers and has received more than 40 US patents.

Elia Beniash Associate Professor, Oral Biology and Bioengineering. PhD (Structural Biology and Chemistry), The Weizmann Institute of Science in Israel, 1998. Scientific interests of Dr. Beniash include biomineralization, the structure/function relationships in supramolecular assemblies, bioinspired materials, and tissue engineering. Specifically, Dr. Beniash’s research focuses on understanding basic mechanisms of

95

mineralization in biological systems and applying these strategies to the design of new, nanostructured composite materials.

Kurt Beschorner Research Assistant Professor, Department of Bioengineering. PhD (Bioengineering), University of Pittsburgh (2008). Dr. Beschorner is a member of the Human Movement and Balance Laboratory. His research focuses core competencies in whole-body biomechanics, ergonomics and biotribology to prevent occupational and clinical falling accidents.

Michael L. Boninger Dr. Michael Boninger is a Professor and UPMC Endowed Chair in the Department of Physical Medicine & Rehabilitation at the University of Pittsburgh, School of Medicine and Director of the UPMC Rehabilitation Institute. He is a physician researcher for the United States Department of Veterans Affairs (VA) and is the Medical Director of the Human Engineering Research Laboratories, a VA Rehabilitation Research and Development Center of Excellence. He received his Medical Doctorate degree from Ohio State University, College of Medicine in 1989. Dr. Boninger has an extensive publication record of over 200 papers in the areas of spinal cord injury and technology. The technologies Dr. Boninger has investigated vary from brain computer interfaces to wheelchairs. His central focus is on enabling increased function and participation for individuals with disabilities through development and application of assistive, rehabilitative and regenerative technologies. Dr. Boninger also has extensive experience and publications related to training researchers. His students have won over 50 national awards. Dr. Boninger holds 4 United States patents and has received numerous honors, including being inducted into the Institute of Medicine of the National Academy of Science in 2013.

Harvey S. Borovetz Distinguished Professor and Former Chairman, Bioengineering, Robert L. Hardesty Professor of Surgery and Professor Chemical and Petroleum Engineering. PhD (Bioengineering), Carnegie Mellon University, 1976. Dr. Borovetz' current research interests are focused on the design and clinical utilization of cardiovascular organ replacements for both adult and pediatric patients. Since 1985, he has served as the academic adviser to the University's clinical bioengineering program in mechanical circulatory support. In 1999 and 2000, Dr. Borovetz was on half-time sabbatical at NIH, working in the Bioengineering Research Group of the National Heart, Lung and Blood Institute.

David M. Brienza Professor, Rehabilitation Science and Technology, Bioengineering and the McGowan Institute for Regenerative Medicine; Associate Dean for Strategic Initiatives and Planning, School of Health and Rehabilitation sciences; Interim Director for Prosthetics and Orthotics Program; Director of the Rehabilitation Engineering Research Center on Telerehabilitation;. PhD (Electrical Engineering), University of Virginia, 1991. Dr. Brienza's areas of expertise are soft tissue mechanics, wheelchair seating, pressure ulcer prevention, support surface technology, and wheelchairs.

John Brigham Assistant Professor, Department of Civil & Environmental Engineering and Bioengineering. PhD (Civil and Environmental Engineering), Cornell University, 2008. Dr. Brighamâ&#x20AC;&#x2122;s research interests include the development of efficient computational methods for the representation of multiphysics and multiscale systems, solution strategies for inverse problems associated with nondestructive and noninvasive testing, and numerical modeling of biological systems. His recent work has focused on developing computational strategies for the solution of inverse problems, which address the challenges in both the numerical representation of complex systems and optimization approaches to inverse solutions.

96

Bryan Brown Dr. Bryan Brown is an Assistant Professor of Bioengineering and a core faculty member of the McGowan Institute for Regenerative Medicine. Dr. Brown graduated from the University of Pittsburgh with a B.S. in Mechanical Engineering in 2005 and a PhD in Bioengineering in 2011. Bryan then completed postdoctoral training in the Departments of Biomedical Engineering and Clinical Sciences at Cornell University prior to joining the McGowan Institute for Regenerative Medicine. Bryan is currently a Building Interdisciplinary Research Careers in Women’s Health (BIRCWH K12) Scholar at Magee Women’s Research Institute and holds a secondary appointment in the Department of Obstetrics, Gynecology, and Reproductive Sciences at the University of Pittsburgh. Additionally, Bryan is an Adjunct Assistant Professor of Clinical Sciences at the Cornell University College of Veterinary Medicine. The focus of the Brown Laboratory is upon clinical applications where few effective solutions currently exist, with increasing emphasis upon unmet clinical needs in women’s health. Recent areas of significant interest are temporomandibular joint disease and pelvic organ prolapse. These efforts are currently funded by the Eunice Kennedy Shriver National Institute of Child Health and Human Development, National Institute on Aging, National Institute of General Medical Science, Office of Research on Women’s Health, and the Wallace H. Coulter Foundation.

Dev Chakraborty Professor, Department of Radiology and Bioengineering. PhD (Physics), University of Rochester, 1977.

Dr. Chakraborty's research interests include the measurement and optimization of image quality in medical imaging, using both physical (image based) and psychophysical (human observer based) methods. His special interest is in Free-Response Receiver Operating Characteristic (FROC) methodology which seeks to extend observer performance methodology to more realistic clinical tasks. He has related interests in digital mammography, Computer Aided Detection, dual energy imaging, tomosynthesis and image processing.

Rakié Cham Associate Professor, Department of Bioengineering. PhD (Bioengineering), University of Pittsburgh, 2000. Dr. Cham’s research interests include the postural and biomechanical analysis of human movement and occupational tasks towards the prevention of musculoskeletal injuries. She is particularly interested in understanding the human factors (biomechanical, postural control and neurological) that precipitate falls during gait.

April Chambers Research Assistant Professor, Department of Bioengineering. PhD (Bioengineering), University of Pittsburgh, 2011/2005. Dr. Chambers’ research expertise is in the field of human movement biomechanics and falls prevention. Her research areas of interest include gait and postural control; prosthetics; ergonomics; and long term fatigue in young and older adults.

Kevin C. Chan, Ph.D. Assistant Professor of Ophthalmology and Bioengineering, NeuroImaging Laboratory University of Pittsburgh. PhD (Biomedical Engineering), The University of Hong Kong, 2010. Since 2011, Dr. Chan has been directing a magnetic resonance imaging (MRI) research program on structural, metabolic and functional imaging of the visual system in health and disease at the NeuroImaging Laboratory at the University of Pittsburgh. His laboratory focuses on developing and applying new methods for noninvasively imaging neurodegeneration, neurodevelopment, neuroplasticity and neuroregeneration in visionrelated diseases and injuries to provide better strategies for vision preservation and restoration. His lab's current active research areas include: (1) Structure-function relationships and longitudinal assessments of glaucomatous changes in the eye and the brain; (2) Investigating the mechanistic processes of sensory substitution using structural and functional brain imaging; (3) In vivo evaluation of microstructural reorganization and functional recovery during visual brain plasticity and regeneration; (4) Development of in vivo magnetic resonance imaging contrasts enabling visualization and quantification of the visual system; (5) Establishing animal and ex vivo models for assessing the glaucomatous effect on the eye and the brain.

97

These studies are mainly conducted at the Neuroscience Imaging Center, which is located at the McGowan Institute for Regenerative Medicine of the University of Pittsburgh. The laboratory houses a 3-Tesla MRI scanner for human and primate studies, a 9.4-Tesla MRI scanner for small animal studies, an animal visuomotor behavior laboratory and a physiology laboratory dedicated to basic brain research.

Kevin P. Chen Associate Professor and Paul E. Lego Faculty Fellow, Department of Electrical and Computer Engineering.

PhD (Electrical Engineering) University of Toronto, 2002. Chen and his students engage in wide spectra of interdisciplinary research. They explore both technology frontiers and develop engineering solutions for sustainability, energy, bio-medical, homeland security, and etc. The group's expertise includes fiber optics, UV and ultrafast laser processing, microfabrication, finite element analysis, nuclear micro-engineering especially in tritium, and miniaturized photonic system integration. Our group is well-equipped, resourceful, friendly, and open for collaboration. Members of Chen’s group come from different backgrounds and are self-motivated. We do not self-impose boundary. As principal investigators, our research efforts have been supported by a number of funding agencies including DARPA, TTC, NSF, DoE, NASA, and private industries. Chen is a recipient of National Science Foundation CAREER Award.

Youngjae Chun Assistant Professor in Industrial Engineering (secondary appointment in Bioengineering). PhD (Mechanical Engineering), University of California, Los Angeles, 2009. Dr. Chun’s primary research focus is on designing, manufacturing, and testing of medical devices to treat vascular diseases using smart materials through minimally invasive surgery. He also has an interest in the development of bio-hybrid composite biomaterials, implantable microsystems, and in-vitro experimental apparatus for developing more diverse biomedical applications with a focus on novel materials and manufacturing concepts.

Jennifer L. Collinger Assistant Professor in Physical Medicine and Rehabilitation and Bioengineering, Research Biomedical Engineer at the VA R&D Center of Excellence on Wheelchairs and Related Technology. PhD (Bioengineering), University of Pittsburgh, 2009. Dr. Collinger’s doctoral work focused on the prevention of upper limb injuries in manual wheelchair users. Her current research interests are related to neurorehabilitation and brain-computer interface technology for individuals with motor impairments. One research project is investigating the possibility of using real-time feedback of motor cortex activity measured by magnetoencephalography (MEG) to increase motor cortex activity and motor function for people with tetraplegia. Her brain-computer interface research projects involve using neural signals recorded with implanted microelectrodes to control assistive devices for people with paralysis.

Ian Conner Ian P. Conner is an Assistant Professor at the University of Pittsburgh, specializing in glaucoma, cataract, and anterior segment surgery. Dr. Conner was educated at West Virginia University, where he also obtained his medical degree and graduate degree in neurobiology. He completed his residency in ophthalmology at the University of Cincinnati, and obtained fellowship training in glaucoma and anterior segment surgery at the University of Pittsburgh. He is certified by the American Board of Ophthalmology and is a member of the American Glaucoma Society He also sees patients for comprehensive eye exams. His research interests are in the study of how glaucoma affects the visual brain and behavior, regenerative technology for treatment of glaucoma and optic nerve diseases, and improvement of glaucoma surgical techniques.

Gregory Cooper Research Assistant Professor, Surgery, Oral Biology, and Bioengineering. PhD (Bioengineering), University of Pittsburgh, 2006. Dr. Cooper has been involved in translational-related research based on

98

tissue engineering for the Department of Surgery, Division of Plastic Surgery. Currently he serves as Director of the Pediatric Craniofacial Biology Laboratory at Childrenâ&#x20AC;&#x2122;s Hospital.

Rory A. Cooper Distinguished Professor and Chairman (RST), Rehabilitation Engineering, Mechanical Engineering, and Bioengineering. PhD (Electrical and Computer Engineering), UC Santa Barbara, 1989. Dr. Cooper's areas of interest are the design and testing of assistive devices for mobility impairment, and the influence of disability of neuromotor control and biomechanics. He is also interested in the development of the smart sensor and instrumentation for those applications.

Timothy E. Corcoran Associate Professor, Medicine and Bioengineering. PhD (Bioengineering) Carnegie Mellon University, 2000. Dr. Corcoran's research interests include aerosol drug delivery and functional imaging of the lungs.

This includes the development of nuclear imaging methods for measuring mucociliary clearance and liquid transport in the lungs. These techniques are used in the development of novel therapies for cystic fibrosis.

Dr. Corcoran has also been involved in the development of therapies for lung transplant recipients and in the design and testing of inhaled drug delivery devices.

Xinyan (Tracy) Cui Associate Professor, Bioengineering. PhD (Macromolecular Science and Engineering), University of Michigan (2002); Research Scientist at Unilever Research US (2002-2003). Dr. Cui directs the Laboratory of Neural Tissue Electrode Interface and Neural Tissue Engineering (NTE Lab). In the field of Neural Interface, her interest lies in the characterization and improvement of the chronic neural electrode-tissue interface from the biomaterials and biocompatibility perspective. In Neural Tissue Engineering, her lab is interested in manipulating stem cell growth and differentiation with electrically conductive and active materials. In addition, Dr. Cui is also interested in developing various biosensors and drug delivery systems. Dr. Cui is the member of McGowan Institute for Regenerative Medicine and Center for Neural Basis of Cognition.

Moni Kanchan Datta Research Assistant Professor, Department of Bioengineering PhD (Metallurgical and Materials Engineering), Indian Institute of Technology, Kharagpur, India (2003). Dr. Datta's current research interests focus on bone tissue engineering, biodegradable biomaterials, electrochemical science, and basic and applied energy science. He has a solid background in Mettallurgy, Materials Science, and Nanotechnology along with a thorough understanding of the Physical chemistry and electrochemistry aspects of materials.

The main focus of his research in both of these areas is to develop novel low temperature synthesis approaches, and study the relationship between structure-properties and structure-process parameters. In the field of bone tissue engineering, his research is focused on alloy design of biodegradable metallic biomaterials as well as synthesis of the desired alloy using different equilibrium and non-equilibrium processing techniques with novel microstructure for orthopedic and craniofacial applications. On the other hand, Dr. Datta's research on electrochemical science is devoted on electrochemical biosensor, and energy generation and storage for application in portable electronic devices as well as electric and hybrid electric vehicles. Research regarding the energy generation and storage is currently directed towards understanding the theory of solid materials using theoretical approaches while developing new low temperature, mechanochemical and thin film approaches to synthesize nanostructured particulate, nanotubes, nanostructured composites and nano-layered thin film architectures for Li-ion, Na-ion and Mg-ion battery applications.

Lance Davidson Associate Professor. Department of Bioengineering. Secondary appointments at the University of Pittsburgh in the Departments of Developmental Biology and Computational and Systems Biology. Also secondary

99

appointment in the Department of Biomedical Engineering at Carnegie Mellon University. PhD (Biophysics) University of California at Berkeley; Postdoctoral fellowship in Biology and Cell Biology at the University of Virginia in Charlottesville (1996-2004); American Cancer Society Postdoctoral Fellow (1999-2002); Research Assistant Professor in Biology at University of Virginia in Charlottesville (2005).

American Heart Association Beginning Grant-in-Aid (2008). National Science Foundation CAREER Award (2009). Appointed Wellington C. Carl Faculty Fellow (2012). Awarded University of Pittsburgh Provost's Innovation in Education Award (2013). Dr. Davidson’s research seeks to understand the role of mechanics in development. His group integrates cell biology of adhesion and cell motility with tissue architecture and mechanics in order to understand how forces are patterned, generated, and transmitted to bring about formation of tissues and organs in the early developing embryo. Dr. Davidson has pioneered techniques using microsurgery, high resolution time-lapse confocal microscopy, and a variety of biomechanical test apparatus to observe and measure mechanical processes operating in cells and tissues during morphogenesis in the frog embryo. Ongoing projects in the lab involve: 1) understanding how defects in mechanical processes produce birth defects, 2) resolving the molecular mechanisms responsible for mechano-chemical feedback during development and tissue self-assembly, 3) investigating the role of cell- and tissue-mechanics in heart formation, wound healing, and cancer, and 4) applying principles of developmental biology to control the production of engineered tissues.

Richard E. Debski Associate Professor, Bioengineering. PhD (Mechanical Engineering), University of Pittsburgh, 1997. Dr. Debski's research interests include the experimental and computational examination of shoulder and knee biomechanics. His current research projects include improving treatment for rotator cuff tears, developing technology for assessment of rotatory knee instability; assessing function of knee capsule; and determining patellofemoral contact pressures to prevent patellofemoral joint pain and development of osteoarthritis.

Robotic technology and finite element models are used to address these issues. The goal of this research is to improve injury prevention equipment/criteria, surgical procedures and rehabilitation protocols for injuries to the soft tissues at the shoulder and knee.

Dan Ding Associate Professor, Rehabilitation Science & Technology and Bioengineering. PhD (Mechanical and Automation Engineering), the Chinese University of Hong Kong, 2001. Dr. Ding performs her research in the Human Engineering Research Laboratories (HERL) and is interested in rehabilitation engineering and assistive technology in general and specifically in wearable and mHealth applications in rehabilitation and assistive robotics.

Andrew Duncan Dr. Andrew Duncan joined the University of Pittsburgh in 2012 as Assistant Professor in the Department of Pathology, Division of Experimental Pathology, and as a Core Faculty member at the McGowan Institute for Regenerative Medicine. Research in the Duncan lab focuses on liver development, homeostasis and regeneration. One of the defining features of the liver is polyploidy. Hepatocytes are either mononucleated or binucleated, and ploidy is determined by the number of nuclei per cell as well as the ploidy of each nucleus. The functional role of hepatic polyploidization is unclear. Dr. Duncan recently showed that regenerating polyploid hepatocytes undergo specialized cell divisions to form aneuploid daughter cells, generating a high degree of genetic diversity within the liver. Active studies in the lab involve elucidating mechanisms that control hepatic polyploidy and aneuploidy, as well as how these processes affect human disease. Dr. Duncan graduated from the University of North Carolina at Chapel with a B.S. in Biology in 1996. He attended graduate school at Duke University where he earned a Ph.D. in 2005. Dr. Duncan’s graduate work focused on hematopoietic stem cell biology in Dr. Tannishtha Reya’s laboratory in the Department of Pharmacology and Cancer Biology. From 2005 to 2011, Dr. Duncan was a postdoctoral fellow in Dr. Markus Grompe’s lab in the Oregon Stem Cell Center, Oregon Health and Science University.

As a NIH National Research Service Award Fellow, he investigated liver regeneration.

100

Louis D. Falo, Jr., MD, PhD Dr. Louis Falo is Professor and Chairman of the Department of Dermatology at the University of Pittsburgh. Dr. Falo is a graduate of Harvard Medical School, where he earned both his MD and PhD degrees and performed research in immunology. He completed an internship in internal medicine at Massachusetts General Hospital, a dermatology residency through the Harvard Dermatology Program and a fellowship in cancer research at the Dana Farber Cancer Institute. Before coming to the University of Pittsburgh and University of Pittsburgh Medical Center, he was a member of the Harvard faculty in the Department of Dermatology and at the Dana Farber Cancer Institute. Clinically, Dr. Falo is interested primarily in melanoma and nonmelanoma skin cancers. He is currently participating in clinical trials of novel immune therapies for psoriasis and cutaneous T cell lymphomas. However, he is also a member of the University of Pittsburgh Cancer Institute and actively involved in a variety of research projects.

Shawn Farrokhi Assistant Professor, Department of Physical Therapy (Primary), Department of Bioengineering (Secondary). PhD (Biokinesiology), University of Southern California, 2009. The primary focus of Dr. Farrokhiâ&#x20AC;&#x2122;s research is to better understand the causes of lower extremity dysfunction and joint pathology.

More specifically, he is interested in identifying the factors responsible for altered patellofemoral joint mechanics in persons with patellofemoral pain and osteoarthritis. The ultimate goal of this line of research would be to provide the opportunity for early diagnosis of osteoarthritis in those at risk for developing the disease, so early intervention can be implemented more effectively.

William J. Federspiel Professor, Bioengineering, Chemical Engineering, and Critical Care Medicine. PhD (Chemical Engineering), University of Rochester, 1983. Dr. Federspiel directs research in the Medical Devices Laboratory: Biotransport, Pulmonary and Cardiovascular, which is a component of the McGowan Institute for Regenerative Medicine. The goal of work within the laboratory is the design, development and modeling of novel biotransport, pulmonary and cardiovascular medical devices including respiratory support catheters and paracorporeal assist lungs, and membrane and particle based blood purification devices. The major research interests in the laboratory include respiratory and cardiovascular fluid mechanics, mass transport, and microfabrication and fiber technology. Ultimately, the devices and therapies developed in the laboratory will be translated for near term clinical use in critical care settings.

Thomas R. Friberg Professor, Ophthalmology and Bioengineering; Director of Retina Service. MD, University of Minnesota, 1978. Research interests are in the areas of diabetic retinopathy, macular degeneration, retinal detachment, and retinal vein occlusion.

Joseph M. Furman Professor, Otolaryngology, Neurology, Bioengineering, and Physical Therapy. PhD (Bioengineering), University of Pennsylvania, 1979; MD, University of Pennsylvania, 1977. Director, Division of Balance Disorders, The Eye & Ear Institute. As a member of the Graduate Faculty and former Assistant Dean for the MD/PhD Program at the University of Pittsburgh School of Medicine/Carnegie Mellon University, Dr. Furman has a long history of mentoring developing physician scientists. Dr. Furmanâ&#x20AC;&#x2122;s primary research areas are vestibular processing and vestibulo-ocular function in the elderly.

H. Michael Gach, Ph.D. Associate Professor of Radiology (Primary) and Bioengineering (Secondary). PhD (Physics), University of Pittsburgh (1998). Dr. Gach is an imaging physicist and engineer. He performs preclinical and clinical research using magnetic resonance imaging (MRI). He also performs research with theranostic nanoparticles. He is the Director of the preclinical MRI Shared Facility at the University of Pittsburgh

101

Cancer Institute (UPCI). His research interests include quantitative hemodynamics using MRI, PET/MRI, and respiratory motion compensation.

John Galeotti Systems Scientist and Adjunct Assistant Professor at Carnegie Mellon University (CMU), directing the Biomedical Image Guidance Laboratory and teaching an internationally recognized graduate course on medical image analysis algorithms. I have a Ph.D. and M.S. in Robotics from CMU’s Robotics Institute (RI, part of the School of Computer Science), and I also have an M.S. and B.S. in Computer Engineering from North Carolina State University. My primary appointment is in the RI, and I also have adjunct appointments with advising privileges is both Biomedical Engineering (BME) at CMU and Bioengineering at the University of Pittsburgh (U. Pitt.). I am working to improve patient outcomes by improving the tools of science and medicine, with a research emphasis on applying novel, real-time computer-controlled optics, image analysis, and visualization approaches to develop systems for image-guided interventions, diagnosis, and biomedical research.

Neeraj J. Gandhi Associate Professor, Bioengineering. Affiliations with Departments of Otolaryngology and Neuroscience, and Center for Neural Basis of Cognition. PhD (Bioengineering), joint between University of California, San Francisco and the University of California, Berkeley, 1997. He completed his postdoctoral research in neuroscience at Baylor College of Medicine and in 2002 joined the balance disorders research group in the Department of Otolaryngology. In 2014, Dr. Gandhi switched his primary affiliation to the Department of Bioengineering. Dr. Gandhi’s research uses systems-level neurophysiological and modeling techniques to investigate the neural control of movement with emphases on eye, eye-head, and eye-hand movements.

Jin Gao Visiting Research Assistant Professor, Department of Bioengineering; PhD Chinese Academy of Sciences, 2000; Postdoctoral fellows at University of California at Berkeley and Georgia Institute of Technology/Emory University. Before joining the Department of Bioengineering, Dr. Gao was a research scientist in Department of Biomedical Engineering, GT/Emory. His research focuses on cardiac tissue engineering, biologically-derived Nano cells for drug delivery.

Robert Gaunt Assistant Professor, Department of Physical Medicine and Rehabilitation (Primary), Department of Bioengineering (Secondary). PhD (Biomedical Engineering), University of Alberta (2008). Dr. Gaunt is the Co-Director of the Rehabilitation Neural Engineering Lab and his research focuses on 1) the development of neuroprostheses that restore somatosensation to people with limb loss or paralysis, 2) neural interfaces with the peripheral nervous system, and 3) restoration of bladder function through electrical stimulation of the peripheral nervous system.

Jörg C. Gerlach Professor, Departments of Surgery and Bioengineering, University of Pittsburgh. Dr. Gerlach’s biomedical research projects focused on artificial organs (e.g. trachea replacement), hybrid organs (e.g. endothelial cell seeded vascular prostheses), and on bio-artificial systems (liver support systems for extracorporeal organ regeneration. Dr. Gerlach developed an extracorporeal liver support system, and the Modular Liver Support (MLS) concept that integrates dialysis and detoxification into hybrid liver devices. An project that enabled clinical work in Pittsburgh ist the skin cell spray-deposition system and autologous skin cell grafting. His primary research interests include maintenance and differentiation of cells in vitro for extracorporeal, temporary clinical use as a hybrid organ; production of cells for transplantation in cell-based therapy; production of regenerative mediators by cells in bioreactors for drug therapy and regenerative medicine applications. His primary focus has been the use of liver cells, but he and members of his research group are also working with bone marrow-, embryonic, mesenchymal and fetal stem cells.

102

Thomas W. Gilbert Assistant Professor, Department of Surgery and Bioengineering, McGowan Institute for Regenerative Medicine. PhD (Bioengineering), University of Pittsburgh, 2006. Dr. Gilbert’s primary research interest is the development of regenerative medicine approaches for treatment of injuries and diseases of the respiratory system, particularly the trachea and lungs. Dr. Gilbert is also involved in the development tissue engineered strategies for treatment of congenital heart defects. His research generally covers the areas of biologic scaffolds and extracellular matrix biology, cell mechanobiology, and soft tissue biomechanics.

Thomas G. Gleason Dr. Gleason earned his BA in Chemistry at Middlebury College in Vermont. He then earned his MD from Rush Medical College in Chicago and his MS in Surgery/Immunology from the University of Virginia. He is certified with the American Board of Surgery and the American Board of Thoracic Surgery. Dr. Thomas Gleason is an Associate Professor of Surgery, Division of Cardiothoracic Surgery, University of Pittsburgh School of Medicine, with a secondary appointment in the Department of Bioengineering, Swanson School of Engineering. In addition, he is a member of the Center for Vascular Remodeling and Regeneration at Pitt. He is also the Director of the Center for Thoracic Aortic Disease and the Co-Director of the Center for Heart Valve Disease at the Heart, Lung and Esophageal Surgery Institute, both at the University of Pittsburgh Medical Center. Dr. Gleason serves as the Chief, Division of Cardiovascular Surgery, UPMC Shadyside Hospital. Dr. Gleason’s current clinical and research interests include thoracic aortic disease management, aortic dissection, ascending aortic (vascular) biology, bicuspid valve associated aortopathy, valve-sparing aortic root reconstruction, aortic and mitral valve repair, endovascular aortic stent grafting, transcatheter aortic valve replacement/implantation, aortic root and aortic arch surgery, surgery for atrial fibrillation, off-pump coronary revascularization, heritable disorders of the thoracic aorta (bicuspid aortic valve, Marfan syndrome, Loeys-Dietz syndrome, Ehlers-Danlos syndrome), and cardiac and aortic infections.

Robert J. Goitz Associate Professor, Orthopaedic Surgery and Bioengineering. MD, Johns Hopkins University School of Medicine, 1992. Dr. Goitz’ research focuses on orthopaedic surgery, upper extremity, biomechanics, and compressive neuropathies.

Angela M. Gronenborn UPMC Rosalind Franklin Professor and Chair, Department of Structural Biology, Distinguished Professor of Structural Biology and Professor of Bioengineering; PhD (Organic Chemistry), University of Cologne, Cologne, Germany, 1978. Areas of interest: Structural biology of proteins and nucleic acids: structure, dynamics, recognition, binding, and function. Her laboratory combines NMR spectroscopy and other structural methods with Biophysics, Biochemistry, and Chemistry to investigate cellular processes at the molecular and atomic levels in relation to human disease.

Kilichan Gurleyik Visiting Assistant Professor, Department of Bioengineering (Primary). D.Sc. (Electrical Engineering, Biomedical Engineering, and Imaging Science & Engineering), Washington University (2003). Dr. Gurleyik (Dr. G) serves as the Education Director of the Center for Medical Innovation (CMI). He specializes in Medical Device/Product Design and Development, Systems Design and Engineering incorporating Mixed-Technology, Signal and Image Processing, Electronic Systems & Devices, Imaging Science & Technology, and Biomedical Engineering.

Alan Hirschman Professor of Bioengineering; Executive Director, Center for Medical Innovation, Swanson School of Engineering. PhD (Electrical Engineering/Biomedical Engineering) 1978, Carnegie Mellon University.

103

Fellow of the AIMBE. Before coming to the University of Pittsburgh, Dr. Hirschman retired from a career of 31 years in engineering, management, and business development at MEDRAD, Inc, a developer of medical devices within the Bayer family of companies. He is an inventor of many of MEDRAD’s core technologies, with 50+ US patents issued. Dr. Hirschman’s current interest is in medical product development and educating new product entrepreneurs.

David Hostler Associate Professor, Emergency Medicine and Bioengineering at the University of Pittsburgh. PhD (physiology) from Ohio University. His research interests are in human performance and the physiological responses of public safety personnel working in protective clothing. He is a founding faculty member and the director of the Emergency Responder Human Performance Lab. In that role, he directs studies to understand the stresses associated with emergency response and develops interventions to improve the health and safety of the nation’s first responders. Dr Hostler is an expert in the area of emergency incident rehabilitation with 24 years of experience in public safety. He has completed the Fireground Rehab Evaluation (FIRE) Trial and the Enhanced Firefighter Rehab Trial (EFFoRT). He is the principle investigator for the SHIELD Trial examining the role of statin drugs and cardiovascular stress in firefighters.

Johnny Huard Dr. Johnny Huard is currently the Henry J. Mankin tenured Professor and Vice Chair for Musculoskeletal Cellular Therapeutics and the Director of the Stem Cell Research Center in the Department of Orthopaedic Surgery at the University of Pittsburgh. He also holds joint appointments in Microbiology and Molecular Genetics, Bioengineering, Pathology and Physical Medicine and Rehabilitation, Pediatrics, and the University of Pittsburgh Cancer Institute (UPCI) at the University of Pittsburgh. Dr. Huard is also the Deputy Director of Cellular Therapeutic Research at the McGowan Institute for Regenerative Medicine at the University of Pittsburgh. As the Director of the Stem Cell Research Center (SCRC) he oversees over twenty individuals including graduate and undergraduate students, post-doctoral researchers, clinical research fellows, and technical and administrative staff. The SCRC focuses on the identification, characterization, and clinical application of muscle derived stem cells for the treatment of a myriad of conditions including: 1) Duchene muscular dystrophy (DMD), 2) Critical sized long bone and cranial bone injuries, 3) Acutely injured articular cartilage and articular cartilage damaged by osteoarthritis, 4) Compartment syndrome injured limbs which involve injury to the muscles, nerves, circulatory, lymphatic system vasculature, etc., 5) Infarct injured hearts and cardiomyopathy due to DMD. Some of Dr. Huard’s stem cell research has been used clinically (over 170 patients) for the treatment of Urinary incontinence and myocardial infarction. He has authored over 320 manuscripts including peer reviewed articles, review articles, invited papers, and book chapters for various high profile scientific journals including Nature Cell Biology, Science, Nature Biotechnology, Nature Communication, Cell Stem Cells, Journal of Cell Biology, Journal of Clinical Investigation, and etc. Dr. Huard and his research team have received over 80 awards including the Orthopaedic Society’s prestigious Kappa Delta Award and was also the recipient of the University of Pittsburgh’s Chancellor’s Distinguished Research Award. Dr. Huard currently serves on multiple editorial boards of scientific journals and reviews numerous scientific papers for a wide variety of scientific journals in his area of expertise and also serves on numerous study review group at the National Institute of Health.

Tin-Kan Hung Professor of Bioengineering and Civil & Environmental Engineering. PhD (Mechanics and Hydraulics), University of Iowa, 1966; M.S. (Civil Engineering), University of Illinois, 1962; B.S. (Hydraulic Engineering), National Cheng Kung University, 1959. Dr. Hung’s research activities have been focused on computational fluid mechanics, flow separation and vortices, peristaltic flows, fluid mechanics of heart valves and ventricular pumping, pulsating blood flows in stenotic arteries and curved arteries, fluid mechanics of intra-aortic/intra-vena-cava balloon pumping, three-dimensional spiral flows,

104

microcirculation, biomechanics of spinal cord injury, membrane oxygenation, unsteady flow with moving boundaries, earthquake hydrodynamics in reservoir, and sloshing waves in oscillating tank.

Theodore Huppert Assistant Professor, Radiology and Bioengineering. PhD (Biophysics), Harvard University, 2007. Dr. Huppert develops his research in the Magnetic Resonance Research Center in the Physiology of the BOLD Effect. His research focuses on improving the understanding of the underlying physiology and biomechanical principles that govern the cerebral hemodynamic response to neuronal signals.

Tamer S. Ibrahim Associate Professor, Bioengineering and Radiology; Scientific Director of the 7T Research Program, and Director of the RF Research Facility. PhD (Electrical Engineering), the Ohio State University, 2003. Dr. Ibrahimâ&#x20AC;&#x2122;s research activities have mainly focused on ultrahigh field human magnetic resonance imaging (MRI) and wireless biological sensor applications. Using computational electromagnetics and electromagnetic field theory, Dr. Ibrahimâ&#x20AC;&#x2122;s research group designs/constructs/implements radiofrequency (RF) coils/antenna arrays and techniques for 7 tesla human/animal MRI applications, brain-machine interfaces, stimulation of magnetic Nano particles and several other applications. His imaging developments are currently used for studying several diseases such as Alzheimer's, Dementia, Sickle Cell Disease and schizophrenia.

Jeffrey S Isenberg, MD, MPH Department of Medicine (Primary), Department of Pharmacology Chemical Biology (Secondary), Department of Bioengineering (Secondary). Tulane University School of Medicine, MD (1986). Dr. Isenberg is a Principal Investigator in the Vascular Medicine Institute within the Department of Medicine.

His research focuses on ligand receptor mechanisms that control blood flow and pressure and cellular stress responses.

Hiroshi Ishikawa Assistant Professor, Ophthalmology and Bioengineering; Director, Ocular Imaging Center, UPMC Eye Center. MD, Mie University (Japan), 1989. Ophthalmology Residency, Mie University, 1993. Glaucoma Fellowship, Mie University, 1994; Glaucoma Research Fellowship, New York Eye & Ear Infirmary, New York Medical College, 1996. Dr. Ishikawa's research interests include ocular imaging, image processing/analysis, and glaucoma progression analysis.

Lawrence Kagemann Associate Professor, Ophthalmology (Primary) and Bioengineering (Secondary): MS (Biomedical Engineering) University of Miami, 1986. Larry joined the Medical School faculty in 2005, and the engineering faculty in 2006. His current research interests are centered on functional and structural imaging of the eye, including hemodynamic and metabolic measurements. He is currently working with spectral domain optical coherence tomography, expanding the applications of Doppler and spectral imaging for the assessment of blood flow and oximetry in the retina, and has pioneered the first non-invasive direct measurement of aqueous outflow in the anterior segment of the eye.

Pawel Kalinski Professor of Surgery, Immunology, Infectious Diseases and Microbiology, and Bioengineering. Director of Research of the Division of Surgical Oncology and the Director of Immunotransplantation Center of the University of Pittsburgh Cancer Institute. MD: Medical University of Warsaw, Poland, 1990. PhD (Immunology): University of Amsterdam, the Netherlands, 1998. Dr. Kalinski aims to develop effective immune therapies of cancer and chronic infections. The research his group focuses on: 1) Development of therapeutic vaccines with selectively-enhanced Th1-, CTL-, and NK cell-activating properties; 2) Modulation of chemokine receptor expression on immune cells; 3) Tumor-selective modulation of local

105

chemokine environments to enhance local homing of immune effector cells and reduce the accumulation of regulatory/suppressive cells in tumor tissues; and 4) counteracting tumor-associated (or chronic infectionassociated) immune dysfunction. Dr. Kalinski’s work led to several current clinical trials of new cancer immunotherapies developed in collaboration with other members of the UPCI (colorectal-, prostate- and ovarian capittncers, melanoma, glioma and lymphoma). Dr. Kalinski currently serves as an IND sponsor of six clinical trials.

Marina V. Kameneva Research Professor, Surgery and Bioengineering, McGowan Institute for Regenerative Medicine, University of Pittsburgh. PhD (Mechanical Engineering), School of Mathematics and Mechanics, Moscow State University, Moscow (former Soviet Union). After emigration to the United States, Dr. Kameneva joined the faculty of the University of Pittsburgh as a visiting scientist of the Artificial Heart and Lung Program and was appointed as a Research Assistant Professor of Surgery in 1996, as a Research Associate Professor of Surgery in 2000 and as Research Professor of Surgery and Bioengineering in 2006. Dr. Kameneva's areas of expertise are biorheology, hemorheology, macro and microhemodynamics, dragreducing polymers and their potential biomedical applications, and mechanical blood trauma in artificial organs. She is the author of near 150 peer reviewed publications as well as several book chapters in the areas of Fluid Mechanics and Biomechanics. Currently, as Director of the Hemorheology, Hemodynamics and Artificial Blood Research Laboratory, Dr. Kameneva is working with her research team on a variety of projects ranging from the testing of new medical devices to performing theoretical and experimental research related to novel treatments of acute and chronic ischemic conditions caused by disease or trauma, and development of next generation artificial organs including artificial blood. She is a PI, Co-PI and CoInvestigator of Federal grants.

Karl Kandler Professor, Department of Otolaryngology (Primary), Neurobiology (secondary), Bioengineering (secondary). PhD University of Tübingen, Germany (1993). Dr. Kandler is the Director of the Auditory Research Group in the Department of Otolaryngology. His research uses live cell imaging and laser scanning photo stimulation to elucidate the cellular and synaptic mechanisms by which auditory neuronal circuits become reorganized during development and under pathological conditions (hearing loss, tinnitus).

John A. Kellum, MD, FACP, MCCM Dr. John A. Kellum, MD, is Professor of Critical Care Medicine, Medicine, Bioengineering and Clinical and Translational Science, and Vice Chair for Research within the Department of Critical Care Medicine and Director of the Center for Critical Care Nephrology at the University of Pittsburgh. Dr. Kellum received his medical degree from the Medical College of Ohio in 1984. His postgraduate training includes an internship and residency in Internal Medicine at the University of Rochester, NY, and a Fellowship in Critical Care Medicine at the University of Pittsburgh Medical Center. Dr. Kellum is actively involved in education, research and administration. Dr. Kellum’s research interests span various aspects of Critical Care Medicine, but center in critical care nephrology, sepsis and multi-organ failure, and clinical epidemiology, including consensus development and research methodology. He has authored more than 250 publications and has won several awards for teaching. He lectures widely and has given more than 300 seminars and invited lectures worldwide related to his research.

Pratap Khanwilkar Professor and Coulter Program Director in the Department of Bioengineering, Executive-In-Residence, Pitt Innovation Institute and Professor in the McGowan Institute for Regenerative Medicine and in the Clinical and Translational Science Institute. PhD Bioengineering (Utah), MBA (Utah). Dr. Khanwilkar is a Fellow of the American Institute of Medical and Biological Engineering. As a serial medical device entrepreneur, he has started 6 medtech product/service companies, of which 3 are revenue-generating, one of which is a public company. He has taken a next-generation implantable LVAD from concept to First-In-Human

106

feasibility trials to a FDA IDE-approved trial in the US, with 7 issued US patents and related international patents. Dr. Khanwilkar’s translational research interests are to help identify and develop potential medical therapies within Pitt/UPMC to provide clinical and commercial benefit achieved through licenses and licensing revenues, start-ups including business financing obtained and jobs created, and ultimately revenue generated and patients served with improved outcomes. Dr. Khanwilkar has numerous publications, serves on boards of several non-profit scientific, clinical, and economic development organizations, and has received numerous university, state, national and international awards and recognition for his accomplishments in medtech innovation and entrepreneurship.

Kang Kim Associate Professor, Medicine and Bioengineering. PhD (Acoustics), Pennsylvania State University, 2002.

Dr. Kim’s research involves the development of multi-modality functional imaging technologies in Multimodality Biomedical Ultrasound Imaging Lab at the Center for Ultrasound Molecular Imaging and Therapeutics; linear/nonlinear ultrasound elasticity imaging; ultrasound-induced thermal strain imaging; photoacoustic molecular imaging.

Seong-Gi Kim Professor, Departments of Radiology and Bioengineering. PhD (Physical Chemistry), Washington University, St. Louis, MO. Dr. Kim’s research focuses on the development of in vivo NMR techniques which provide information on function, physiology, and anatomy. The three critical issues in fMRI are being investigated: The physiological basis of fMRI, the spatial specificity of fMRI, and the temporal resolution of fMRI. Judith Klein-Seetharaman Associate Professor, Bioengineering. PhD (Biological Chemistry), Massachusetts Institute of Technology, 2000. Dr. Klein-Seetharaman’s research group identifies biomarkers using a computational systems biology approach, develops biosensor assays using structural biology input to detect diagnostic molecules and conducts clinical studies to use molecular information to guide life-style interventions.

Patrick M. Kochanek Patrick M. Kochanek, MD, MCCM is Director of the Safar Center for Resuscitation Research and Professor and Vice Chairman of Critical Care Medicine at the University of Pittsburgh School of Medicine and Professor of Anesthesiology, Pediatrics, Bioengineering and Clinical and Translational Science. He has a long track-record of investigation in traumatic and ischemic brain injury and neurointensive care and is funded by the US Army, NINDS/NIH, NICHD/NIH, and Laerdal Foundation. His research has focused on targeting the secondary brain injury response in traumatic brain injury and cardiac arrest and the development of novel therapies. He is PI of a T-32 titled “Pediatric Neurointensive Care and Resuscitation Research” and has mentored numerous trainees. He is Editor-in-Chief of Pediatric Critical Care Medicine.

Many of Dr. Kochanek’s trainees have gone on to receive independent funding from NIH and careers of national prominence.

Takashi D.Y. Kozai Visiting Research Assistant Professor, Department of Bioengineering. PhD (Biomedical Engineering), University of Pittsburgh (2011), BA (Molecular, Cellular, and Developmental Biology & Biochemistry), University of Colorado at Boulder (2005). Dr. Kozai's research interests are to understand brain injury and disease in new ways using tools that push the limits of scientific research by developing research tools and medical devices with more intimate biological interfaces. In particular, his focus is understanding the microscale neural implant-tissue interface within the blood-brain barrier.

107

Prashant Kumta Edward R. Weidlein Chair Professor of Engineering. PhD (Materials Science and Engineering), University of Arizona, 1990. Dr. Kumta’s research interests cover the two broad areas of energy: storage, generation, and conversion; and biomaterials. The main focus of research in both these areas is to develop novel innovative approaches to generation of indigenous materials and study the relationships of the process parameters, the ensuing microstructure and crystallographic structure to the electrochemical activity in the former and biological response including cell-materials interface in the latter. An important aspect of understanding the interface is engineering substrate platforms for inducing embryonic stem cell differentiation. He has also recently embarked into the arena of additive manufacturing of degradable materials and engineered structures for biomedical applications such as implants and tissue engineering.

Mitra Lavasani Dr. Lavasani received her Ph.D. in 2008 from the Department of Bioengineering at the University of Pittsburgh. She is currently a Research Assistant Professor in the Department of Orthopaedic Surgery at the University of Pittsburgh. Dr. Lavasani also holds secondary appointments in the Department of Bioengineering at the Swanson School of Engineering and in the McGowan Institute for Regenerative Medicine (MIRM). Venous wrapping has been successfully used to bridge nerve defects, both experimentally and clinically, although the biological mechanisms had remained unknown. Dr. Lavasani’s findings revealed that the key biological process for this successful therapy is the contribution of cells migrating from the implanted donor venous graft into the injury site. At the Stem Cell Research Center (SCRC), her multidisciplinary research explores the use of muscle-derived stem/progenitor cell (MDSPC) transplantation to enhance axonal/glial regeneration and provide functional recovery to peripheral nervous system (PNS) injuries in murine experimental models. Dr. Lavasani is also involved in characterizing the role of stem cells during the aging process using genetically engineered mice with dramatically shortened lifespans and age-related pathologies. She has used wild type MDSPC-transplantation to delay and ameliorate the pathologies associated with aging using the mouse models of progeroid ERCC1-XPFdeficient mice. She has won multiple awards, including the New Investigator Recognition Award (NIRA) at 53rd Annual Orthopaedic Research Society (ORS) Meeting (2007); first place in the Scientific Retreat Poster Contest for Cellular Therapies at the MIRM (2007); Chancellor's Outstanding Student, University of Pittsburgh (2006); New Investigator Recognition Award (NIRA) Candidate at the 51st Annual ORS Meeting (2005); and Outstanding Teaching Assistant Awards, University of Pittsburgh, Bioengineering Department (2005).

Charles Laymon Research Assistant Professor, Radiology and Bioengineering. PhD (Physics) University of Pennsylvania, 1989. Dr. Laymon's research interests include imaging instrumentation for clinical and research applications, algorithm and methods development, and basic science research. . A current project is to develop image reconstruction methods and image manipulation and visualization tools for the emerging field of dual modality PET/MR. Dr. Laymon is a member of the Quantitative Imaging Network of the National Cancer Institute and serves on its image analysis, data acquistion, and bioinformatics working groups.

Sanford Leuba Associate Professor, Cell Biology and Physiology, University of Pittsburgh School of Medicine, Hillman Cancer Center, University of Pittsburgh Cancer Institute. PhD (Biochemistry and Biophysics), Oregon State University, 1993. Dr. Leuba’s current research interests are the study of fundamental mechanisms of transcription, DNA repair, and replication in the context of chromatin as revealed by home-built singlemolecule approaches. Dr. Leuba was a National Cancer Institute (NCI) Scholar in residence at the NCI in Bethesda, MD, from 1998 to 2002 and joined the faculty of the University of Pittsburgh School of Medicine in 2002.

108

Steven Little Chairman, Department of Chemical and Petroleum Engineering, Associate Professor and CNG Faculty Fellow, Departments of Chemical Engineering, Bioengineering, Immunology, Opthalmology and The McGowan Institute for Regenerative Medicine, PhD (Chemical Engineering) MIT, 2005. Dr. Littleâ&#x20AC;&#x2122;s group consists of post-doctoral associations, graduate, masters, and numerous undergraduate students in a wide array of areas including Bioengineering, Chemical Engineering, Pharmaceutical Science, Chemistry, Immunology, and Physics.. Dr Little's research interests include controlled drug delivery, biomaterial design, and biomimetics. Specifically, Dr. Little has active research programs in biomimetic delivery (mimicking living systems using synthetic formulations) for regenerative medicine as well as immunotherapeutics.

Yang Liu Professor, Orthopaedic Surgery, Bioengineering, Mechanical Engineering & Materials Sciences, and Physical Medicine & Rehabilitation. PhD (Bioengineering) University of Cincinnati, 1996. Postdoctoral Fellow in Biomedical Engineering, Johns Hopkins School of Medicine, 1997, and Washington University at St. Louis, 1998. Dr. Wang is now the Director of the MechanoBiology Laboratory (MBL, http://www.pitt.edu/~mechbio/) in the Department of Orthopaedic Surgery, University of Pittsburgh School of Medicine. One of his research focuses in the MBL is the cellular and molecular mechanisms of tendinopathy, a prevalent tendon disorder that affects millions of Americans in the United States alone.

Another research focus is the mechanobiology of tendon stem cells (TSCs) and the pathogenic role of TSCs in the development of degenerative tendinopathy due to mechanical overuse/overloading. Still another is the use of autologous platelet-rich plasma (PRP), in combination with engineered tendon matrix (ETM) and stem cells, to repair injured tendons. In the MBL, interdisciplinary approaches, including cell biology, molecular biology, tissue engineering, and engineering mechanics, are applied to the investigations. New technologies such as cell traction force microscopy (CTFM) and micropost force sensor array are currently used in determining cellular function in terms of cell contractility and motility. Tab Michael T. Lotze Professor, Departments of Surgery, Immunology, and Bioengineering, University of Pittsburgh School of Medicine; Vice Chair of Research, Department of Surgery; Associate Director for Strategic Partnerships, University of Pittsburgh Cancer Institute; Assistant Vice Chancellor, UPSHS. Bachelor of Biomedical Sciences and MD, Northwestern University (Evanston, Chicago), 1973, 1974. Dr. Lotze's primary area of research is in tumor immunology, particularly the role of cellular therapy using dendritic cells and NK cells. His current research interests include the further identification of clinical biomarkers and surrogates in the setting of chronic inflammatory disease, the analysis and application of biomedical instrumentation including multicolor flow cytometry, high content imaging of intracellular signaling in response to cytokines, and the role of autophagy, the nuclear protein high molecular group B1 [HMGB1] and other Damage Associated Molecular Pattern Molecules [DAMPs] in tissue injury, repair, and cancer.

Patrick J. Loughlin William Kepler Whiteford Professor of Bioengineering. PhD (Electrical Engineering), University of Washington (Seattle), 1992. Dr. Loughlin has expertise in time-varying signals and systems and nonstationary signal processing, with applications in biomedical engineering and acoustics. His research interests include the impact of aging and disease on human postural control; haptics and vibrotactile feedback for balance and BMI; biomedical signal processing including frequency tracking and neural signal processing; and and pulse propagation in dispersive media.

Arash Mahboobin Research Assistant Professor, Bioengineering. PhD (Electrical Engineering), University of Pittsburgh, 2007. Dr. Mahboobin's research interests are in computational biomechanics (musculoskeletal modeling), human postural control, time-varying signals and systems, and hybrid-optimization. His current research

109

involves in developing muscle-actuated forward dynamic simulations of gait and posture, and analysis and modeling of human postural control.

Spandan Maiti Assistant Professor, Bioengineering. PhD (Aerospace Engineering), University of Illinois, 2002. Research interests include computational biomechanics and materials science, deformation and failure response of soft tissues and biomaterials, multiscale and multiphysics techniques applied to physical and biological systems.

Rama Mallampalli, M.D. Professor, Department of Medicine (Primary), Department of Bioengineering (Secondary). MD (Medicine), University of Wisconsin (1984). Dr. Mallampalli serves as Vice\ Chair for Research in Medicine and the Director of the Acute Lung Injury Center of Excellence in the Department of Medicine.

His research focuses on pulmonary epithelial molecular and cell biology as it relates to inflammation. His laboratory is internationally recognized in the area of lipid metabolism and proteolysis as it relates to acute lung injury.

Zhi-Hong Mao Associate Professor of Electrical/Computer Engineering and Bioengineering. PhD (Electrical and Medical Engineering), Harvard University-Massachusetts Institute of Technology, Division of Health Sciences and Technology, 2005. Dr. Maoâ&#x20AC;&#x2122;s research interests include neural control and learning, human-in-the-loop control systems, and networked control systems.

Kacey G. Marra Associate Professor, Departments of Plastic Surgery and Bioengineering. PhD (Organic Chemistry), University of Pittsburgh, 1996. Dr. Marra's current research interests include biomaterials and tissue engineering. Dr. Marra is Co-Director of the Adipose Stem Cell Center, and as such, much of her research is focused on adipose-derived stem cell behavior. Her research has a strong focus in nerve regeneration, and many in her group both design novel polymeric nerve conduits as well as differentiate adult stem cells to neural and glial progenitor cells. Of specific interest is the use of both polymer microspheres and hydrogels for controlled drug and growth factor delivery.

Patrick McMahon For over 20 years, my coworkers and I have made significant contributions to the field of orthopaedic surgery, particularly in clinical management of shoulder and knee injuries resulting in improved patient outcome. My research interests have included detailed analysis of joint anatomy, experimental and clinical analysis of ligaments and tendons involved in joint stability and techniques for improved treatments of musculoskeletal injuries such as anterior cruicate ligament rupture, shoulder osteoarthritis and rotator cuff tears. A major research focus has been on the function of the shoulder capsule in joint stability. We developed a cadaveric model of shoulder dislocation that simulates lesions found in vivo. We have analyzed the structure and function of both the normal and injured glenohumeral capsule with the aim of precisely localizing its injuries. This has resulted in better techniques for repair after shoulder dislocation. These studies are a result of a successful record of funding through grants and have resulted in over 75 refereed journal articles, 2 edited books, over 20 book chapters and numerous articles on the Internet.

James Menegazzi Research Professor of Emergency Medicine and Bioengineering. PhD (Exercise Physiology), University of Pittsburgh, 1987. Dr. Menegazzi is Department of Emergency Medicine Endowed Professor of Resuscitation Research. Editor-in-Chief of Prehospital Emergency Care. His pioneering basic science work involves the development of protocols for improving cardiopulmonary resuscitation. Other research interests include emergency medical services, heart arrest, induced hypothermia, reperfusion injury, resuscitation, and ventricular fibrillation waveform analyses. He has had extramural funding from the

110

National Heart, Lung, and Blood Institute for eleven consecutive years. Dr. Menegazzi holds three patents, with a fourth pending.

Prahlad G Menon Assistant Professor (Adjunct), Department of Bioengineering (Primary). PhD (Biomedical Engineering), Carnegie Mellon University (2013). Dr. Menon is the Director of The Medical Diagnostics & CardioVascular Engineering lab - The MeDCaVE (see: www.justcallharry.com) - a multidisciplinary research program, innovating at the confluence of radiology, surgical practice, informatics and high performance computing. The MeDCaVE is dedicated to healthcare advancement using robust algorithmic analysis of biomedical imaging data augmented with physics-based numerical modeling of biomechanics, which is invaluable for early technical feasibility assessment studies of novel medical device technologies. Dr. Menon's research has seen primary application in the development of quantitative metrics to support timecritical decisions relating to pediatric or adult cardiovascular pathologies, which has in-turn begun to see extended application in optimization of innovative image-guided device deployment strategies for improved outcomes and quality of life after complex surgical procedures.

Marlin Mickle Marlin H. Mickle is currently Professor Emeritus of Electrical and Computer Engineering. He was formerly the Bell of PA/ Bell Atlantic Professor, Nickolas A. DeCecco Professor. He was previously Professor of Computer Engineering, Telecommunications, Bioengineering and Industrial Engineering at the University of Pittsburgh. He was the Director of the RFID Center of Excellence. He received the B.S.E.E., M.S.E.E., and the Ph.D. University of Pittsburgh in 1961, 1963, and 1967. Marlin received the Carnegie Science Center Award for Excellence in Corporate Innovation - 2005; he has 35+ patents, received the Pitt Innovator Award 2005, 2006, 2007, 2008, 2009, 2010 and 2011; 1988 Recipient of the Systems Research and Cybernetics Award of the IIASSRC; the Robert O. Agbede Faculty Award for Diversity, 2005-06; Distinguished Alumnus, Department of Elec. & Compggach. Engr.– 2008, a member of the AIDC100, the Ted Williams Award from AIM, and is a Life Fellow of the IEEE. Marlin's interest are in wireless technologies and implantable medical devices.

Mark Miller Associate Research Professor, Department of Mechanical Engineering & Materials Science and Bioengineering. PhD (Applied Mathematics), University of Michigan, 1990. Director, Orthopaedic Biomechanics Laboratory, Allegheny General Hospital. The Biomechanics Laboratory broadly supports all subspecialties of orthopaedic surgery. Current topics of research include investigations of soft tissue injuries to the elbow and of the mechanical behavior of elbow replacements.

Pamela Moalli Associate Professor; Director of Fellowship in Urogynecology and Female Pelvic Medicine; Division of Urogynecology and Reconstructive Pelvic Surgery, Department of Obstetrics, Gynecology, and Reproductive Sciences, Magee-Womens Hospital and University of Pittsburgh; Investigator, MageeWomen’s Research Institute. Dr. Moalli graduated from the NIH sponsored Medical Scientist Training Program at Northwestern University in 1994. She had earned a PhD in molecular and cellular biology and a medical degree over a period of 8 years. Residency: Obstetrics and Gynecology at Magee-Women’s Hospital of the University of Pittsburgh (1994-1998). From 1998 to 2000 she completed a fellowship in Urogynecology and Reconstructive Pelvic Surgery at the same institution. Dr. Moalli’s NIH-supported research focuses on the effect of menopause on connective tissue remodeling in the vagina and supportive tissues. In addition, Dr. Moalli studies mechanisms of maternal birth injury using both rodent and nonhuman primate models. Finally, she is involved in several projects focusing on the development of improved graft materials for use in reconstructive pelvic surgeries. Her research team is highly interdisciplinary involving members of the Center for Biological Imaging, the Department of Engineering, the Department of Regenerative Medicine and the Division of Urogynecology.

111

Michael Modo Associate Professor in Radiology, Bioengeering, the Centre for Cellular Basis of Behavior and the McGowan Institute for Regenerative Medicine. Mike Modo obtained a PhD in Neuroscience from King's College London (United Kingdom) in 2001 and moved to the University of Pittsburgh in 2011. The main research interests of the Regenerative Imaging Laboratory consist of four areas. Firstly, we aim to understand the neuroanatomical basis of behavior. We are especially interested in how damage to the brain causes changes in behaviors. For analysis, we use batteries of behavioral tests, as well as non-invasive imaging, such as magnetic resonance imaging (MRI). Secondly, we intend to repair brain damage by implantation of neural stem cells and are also developing in situ tissue engineering strategies (i.e. combining multiple types of cells with biomaterials). Thirdly, we are developing non-invasive imaging strategies that allow us to visualize the location and survival of implanted cells, but will also afford the in vivo monitoring of the replacement of brain tissue. Lastly, we plan to integrate the analysis of the cytoarchitectural organization of the brain by histology with post-mortem MRI. The hope is that these research directions will eventually lead to better therapies for patients with stroke, Huntington's, and Parkinson's disease.

Volker Musahl Medical Director UPMC Center for Sports Medicine, South Side. Program Director Sports Medicine Fellowship. Associate Professor, Departments of Orthopaedic Surgery and Bioengineering. Co-Head Team Physician Pitt Football. Co-Director Orthopaedic Robotics Laboratory. MD, Albert-Ludwigs University, Freiburg, Germany, 1998. Dr. Musahl specializes in sports medicine; he provides comprehensive care of injuries to the knee, shoulder, elbow, hip, and ankle.

Robert Nishikawa Visiting Professor, Department of Radiology. PhD (Medical Biophysics), University of Toronto (1990).

Dr. Nishikawa serves as the Director of Clinical Translational Medical Physics Laboratory. His research aims to improve the detection and diagnosis of breast cancer through developing improvrakied x-ray imaging techniques and through development of methods to quantify the performance of radiologists when using these techniques.

Martin Oudega Assistant Professor, Department of Physical Medicine and Rehabilitation (Primary), Department of Bioengineering and Neurobiology (Secondary). PhD (Medical Biology), University of Leiden, The Netherlands (1990). Dr. Oudega is the Director of the Spinal Cord Repair Laboratory. His research aims to develop repair strategies for the damaged spinal cord for translation into the clinic.

Robert Parker Professor, Department of Chemical and Petroleum Engineering. B.S. Chemical Engineering, University of Rochester (1994), PhD Chemical Engineering, University of Delaware (1999). The Parker lab is primarily focused in the area of systems medicine, the translational science counterpart to systems biology, at the interface between systems analysis and clinical medicine. We employ engineering tools, including mathematical modeling, dynamical systems analysis, control theory and optimization, to address clinicallyrelevant problems in the areas of inflammation, cancer, cystic fibrosis, and diabetes/glucose control, and critical care. These advanced computational techniques help clinicians visualize, assimilate, analyze, and formulate decisions using the complex interplay of the measurements and data available to them. Close collaboration and communication with clinical scientists at the University of Pittsburgh provide the rapid feedback that facilitates the translation of engineering tools to the clinic. Prof. Parker also has appointments or affiliations with the Department of Bioengineering, the Department of Critical Care Medicine, the CRISMA Laboratories, the McGowan Institute for Regenerative Medicine, and the University of Pittsburgh Cancer Institute.

112

John F. Patzer II Associate Professor, Bioengineering and Chemical Engineering. PhD (Chemical Engineering, Fluid Mechanics), Stanford University, 1980. Dr. Patzer's research interests are in the application of transport phenomena and reaction engineering in support of biomedical bioartificial organ development and replacement. Dr. Patzer is active in development of both artificial (non-cell-based detoxification) and bioartificial (hepatocyte-based) liver support systems for patients with acute liver failure. He is collaborating with physicians at the Thomas E. Starzl Transplantation Institute in clinical evaluation of bound solute dialysis (artificial liver) to support patients with acute renal failure post-transplant. Other interests include renal failure therapies, artificial pancreas, and skin regeneration.

Jay W. Pettegrew Professor and Director of Neurophysics Laboratory, (Psychiatry Department). MD, University of Illinois, 1969. Dr. Pettegrew’s research interests are focused on using NMR and MRI technology, specializing in the molecular events underlying normal brain development and aging and how these events are altered in diseases such Alzheimer’s, autism schizophrenia and major depressive illness. He also is investigating the molecular similarities and differences of dementia chamthe molecular specificity of the findings. An imaging molecule has been designed by Dr. Pettegrew, which will image the earliest molecular alterations that occurs in Alzheimer disease. This MRI based biomarker will allow the detection of molecular changes in Alzheimer’s disease even decades before the onset of symptoms. Dr. Pettegrew has been a NIH reviewer for over 20 years and has been a member NIH study section since 1984 and has chaired a study section. He has been continuously funded by NIH since 1985. Left position July 31, 2014.

Julie A. Phillippi Assistant Professor of Cardiothoracic Surgery (primary appointment) and Bioengineering (secondary appointment). PhD (Biological Sciences), Carnegie Mellon University, 2005. Dr. Phillippi’s research scope broadly encompasses cell-extracellular matrix (ECM) dynamics in cardiovascular diseases. One focus of her work is the role of oxidative stress on ECM homeostasis in bicuspid aortic valve-associated aortopathy. Of particular interest to Dr. Phillippi is the presence of local progenitor cells within distinct microenvironments of the aorta and their contribution to the development and progression of cardiovascular pathologies. Dr. Phillippi’s projects are carried out using human aortic tissue specimens and cell populations isolated from surgical patients of the Center for Thoracic Aortic Disease at the University of Pittsburgh Medical Center. Dr. Phillippi and her colleagues within the Thoracic Aortic Disease Research Laboratory are using tissue-engineering models to characterize the influence of distinct cell populations within the ascending aorta and the role of oxidative stress pathways on aortic wall architecture, strength and propensity for aortic disease. Dr. Phillippi is affiliated faculty of the McGowan Institute for Regenerative Medicine and the Center for Vascular Remodeling and Regeneration.

Rosa Lynn Pinkus Professor of Medicine/Neurosurgery; Associate Director, Center for Bioethics and Health Law and Director, Consortium Ethics Program University of Pittsburgh, Rosa Lynn retired from the University of Pittsburgh in December, 2013. At that time, she accepted an Adjunct Professorship in the Department of Bioengineering. Dr. Pinkus earned her PhD (1975) from the State University of New York at Buffalo and joined the faculty of the University Of Pittsburgh School Of Medicine in 1980. She taught applied ethics for over thirty years in both the Schools of Medicine and Engineering. Supported by funds from the Whitaker Foundation, she develod both the required graduate and undergraduate courses in Bioethics in the Department. Rosa Lynn is lead author of the book, Engineering Ethics: Balancing Cost, Risk and Schedules: Lessons Learned from the Space Shuttle (Cambridge University Press, 1997) and co-author, with Mark Kuczewski, of An Ethics Casebook for Hospitals: Practical Approaches to Everyday Ethics (Georgetown University Press, 1999). Currently she teaches the required graduate bioengineering bioethics course and works with the department on other ethics related initiatives. Her most recent

113

publication, with Claire Gloeckner and Angela Fortunato, “The Role of Technical Knowledge in Casebased Reasoning” will be published this year in the Journal of Science,Engineering and Ethics. Both Rosa Lynn and the Department of Bioengineering look forward to a long and productive working relationship!

Michael R. Pinsky Professor of Critical Care Medicine, Bioengineering, Cardiovascular Disease, Anesthesiology and Clinical & Translational Science. Program Director, NRSA Training Program. MD (Critical Care Medicine), McGill University, Montreal, 1974. Current research interests: heart-lung interactions, hemodynamic monitoring, left and right ventricular function, blood flow distribution, molecular mechanisms in sepsis, complexity modeling of disease, management of shock, medical education, and health services research.

Bruce R. Pitt Professor and Chairman, Department of Environmental & Occupational Health, The Graduate School of Public Health; Professor of Pharmacology and Bioengineering. PhD (Environmental Physiology), The Johns Hopkins University, 1977. Dr. Pitt’s laboratory efforts are directed towards original studies on the molecular and cellular biology of lung. To date, this work has focused primarily on the role of oxidants and nitric oxide in affecting pulmonary endothelial and vascular smooth muscle cell function. Isolated primary cell cultures, genetically modified murine models and somatic gene transfer to lung have been used as model systems to identify the role of partially reduced oxygen and nitrogen species in the response of the lung to stress and injury.

Jiantao Pu Assistant Professor, Departments of Radiology and Bioengineering. PhD (Computer Science), Peking University, 2002. Dr. Pu' research interests lie at the interface between computer science and biomedicine with a special focus on biomedical image analysis, biomedical informatics, computer-aided detection/diagnosis, computer graphics and vision, machine learning, and human-computer interaction.

His research goal is to develop innovative techniques that may lead to profound discoveries in both the computing and biomedical fields and advance the understanding of underlying mechanism of various biomedical problems through imaging.

Yongxian Qian Assistant Professor in Radiology and Bioengineering, PhD (Biomedical engineering), Huazhong University of Science and Technology, 2002. Dr. Qian's research interests include two main areas.

Technological development of magnetic resonance imaging (MRI) pulse sequences and image reconstructions, with a special emphasis on fast imaging with spiral or parallel acquisitions at ultrashort echo time (UTE), is the focus of the first research area. The second research area focuses on the clinical applications of UTE MR imaging to the detection and treatment monitoring of knee osteoarthritis and brain tumors via proton (1H) or sodium (23Na) imaging, and to the study on therepeutic mechnism of Chinese acupuncture. One of the UTE pulse sequences has been patented in United States and used in multiple research projects such as the evaluation of degenerative or injured cartilages in the knee and brain tumors. Dr. Qian and colleagues have developed and continue to develop novel MR imaging techniques for clinical use.

Mark S. Redfern Professor, Bioengineering, Otolaryngology, and Rehabilitation Science. Vice Provost for Research, University of Pittsburgh. PhD (Bioengineering), University of Michigan, 1988. Dr. Redfern's research is focused in: human movement biomechanics, postural control, and ergonomics. The major goal of his postural research is the prevention of falling injuries by investigating the factors that influence balance, particularly in the elderly. He also studies vestibular disorders, their impact on postural control, and methods of vestibular rehabilitation. His research approach is to develop an understanding of the postural control system towards better identification of balance problems, and then to use this knowledge to

114

develop new interventions or rehabilitation methods. Dr. Redfern also does applied research in fall prevention through design of the home and work environment. He consults with industry on ergonomics and workplace design for the prevention of musculoskeletal injuries.

Anne Robertson Associate Professor, Departments of Mechanical Engineering and Bioengineering. PhD, University of California Berkeley. Dr. Robertson is active in research and teaching in continuum mechanics, with particular emphasis on Newtonian and non-Newtonian fluid dynamics, cerebral vascular disease, and constitutive modeling of soft biological tissues.

Partha Roy Associate Professor, Bioengineering and Pathology. PhD (Biomedical Engineering) University of Texas Southwestern Medical Center; Postdoctoral fellowships in Cell Biology at Harvard Medical School and the University of North Carolina at Chapel Hill. Dr. Royâ&#x20AC;&#x2122;s laboratory studies cell migration, tumor metastasis, angiogenesis, phosphoinositide signaling and protein-protein interactions using various cell biology, biochemistry, microscopic imaging and in vivo techniques.

J. Peter Rubin Chief of the Division of Plastic and Reconstructive Surgery and Associate Professor, Bioengineering.

MD, Tufts University School of Medicine. Dr. Rubin is a noted expert on adult stem cells derived from fat tissue and body contouring surgery. He leads a program that is devising innovative strategies for the use of adipose (fat)-derived stem cells to not only address problems of tissue regeneration but also other diseases that benefit from stem cell-based therapies. In addition, Dr. Rubin is Director of the UPMC Life after Weight Loss Program, a leading center for plastic surgery after weight loss. He is co-director of the Adipose Stem Cell Center and co-director of the UPMC Aesthetic Plastic Surgery Center. His laboratory research focuses on applications of adult adipose-derived stem cells for restoring damaged tissues after trauma and cancer therapy. He currently is the lead investigator for clinical trials using technologies designed to improve the lives of wounded military personnel.

Guy Salama Guy Salama, PhD, is a Professor in the Department of Medicine and the Heart and Vascular Institute at the University of Pittsburgh School of Medicine. He is adjunct professor in the Department of Cell Biology, Bioengineering and the McGowan Institute of Regenerative Medicine. Dr. Salama holds a B.S. in Physics (1968) from the City College of New York and a M.S. in Physics (1971) from the University of Pennsylvania. In 1997, he was awarded his Ph.D. in Biochemistry and Biophysics from the University of Pennsylvania. Currently, at the University of Pittsburgh, Dr. Salama is actively involved in both academics and research, and has focused his efforts on the elucidation of the mechanisms responsible for the initiation and termination of cardiac arrhythmias. Within his laboratory, Dr. Salama has been diligently working toward the elucidation of the mechanisms responsible for the initiation and termination of cardiac arrhythmias. An important step towards that end is to better understand the electrophysiology and function of the normal mammalian heart. To achieve these goals, Dr. Salama and his research personnel have developed the use of voltage-sensitive dyes and high temporal and spatial resolution optical techniques to map patterns of action potential (AP) propagation and repolarization, simultaneously with intracellular Calcium transients. Currently, these novel methods are being used to study the mechanisms underlying sex-differences in arrhyhtmia vulnerability and the genomic regulation of cardiac ion channels by sex hormones. More recently, Dr. Salama has been studying atrial fibrillation (AF) and the use of the hormone relaxin to suppress AF and arrhyhtmia in heart failure. The mechanisms of action of pleiotropic hormone relaxin are being investigated to elucidate how it reverses fibrosis, cellular hypertrophy and suppresses AF.

115

Joseph T. Samosky Assistant Professor, Department of Bioengineering. PhD in Medical Engineering from the Massachusetts Institute of Technology and the Harvard-MIT Division of Health Sciences and Technology (2002) with clinical education at Harvard Medical School. Dr. Samosky is the director of the Simulation and Medical Technology R&D Center, an interdisciplinary research group whose primary mission is to invent nextgeneration enabling technologies for simulation-based healthcare training and new medical devices. His research focuses on user-centric design and engineering of real-time interactive systems that enhance learning, improve patient care and enhance patient safety. He has a strong interest in simulation-based learning, human-computer interfaces, sensor systems, advanced perceptual display technologies (including augmented reality display), biomimetic materials, 3D fabrication techniques, and robotic systems, including actuators and embedded control systems. He is the co-developer of the Combat Medic Training System (COMETS), an autonomous, tetherless, humanoid robotic trauma patient that supports field training in casualty care. Dr. Samosky is an enthusiastic advocate of experiential learning and project-based, hands-on engineering education and has mentored over 80 bioengineering students in senior design projects. His teaching has included workshops and classes in prototyping, systems engineering, sensors, data acquisition and computer control. He is currently developing a new freshman honors engineering course, “The Art of Hands-On Systems Design and Engineering,” to promote exploring and learning multidisciplinary, prototype-based system design and engineering.

Michelle Gabriele Sandrian Assistant Professor, Department of Ophthalmology (Primary), Department of Bioengineering (Secondary).

Post-doc (Medical Physics and Bioengineering), Medical University of Vienna, Vienna, Austria (2013), PhD (Bioengineering), University of Pittsburgh (2010). Dr. Sandrian’s In Vivo Optical Imaging Laboratory is focused on the development and clinical translation of novel imaging approaches and contrast agents that can be used to highlight specific structures in the eye and visual system.

Shilpa Sant, PhD Assistant Professor, Department of Pharmaceutical Sciences, School of Pharmacy (Primary), Department of Bioengineering (Secondary), McGowan Institute for Regenerative Medicine (Faculty Member), PhD (Pharmaceutical Technology, University of Montreal, 2008). The main research interest in the Sant Laboratory is to develop biomimetic three-dimensional (3D) in vitro models that can be applied to study processes involved in tissue regeneration as well as disease pathophysiology. We build biomimetic microenvironment using interdisciplinary approaches in materials science, drug/gene delivery and cellular/molecular biology. Eventually, we envision using these models as biomimetic in vitro 3D tissue surrogates for testing drug safety and efficacy.

Andrew J. Schaefer Andrew Schaefer is William Kepler Whiteford Professor of Industrial Engineering at the University of Pittsburgh. He received his PhD in Industrial and Systems Engineering from Georgia Tech in 2000. His research interests include stochastic optimization methodology and its application to health care problems.

In particular, he is interested in optimizing decisions arising in the treatment of a variety of diseases, including end-stage liver disease, HIV/AIDS and influenza.

Gerald Schatten Professor, Obstetrics, Gynecology, & Reproductive Sciences; Cell Biology; and Bioengineering; Director, Pittsburgh Development Center (PDC). PhD (Cell & Developmental Biology), University of California, Berkeley, 1975. Dr. Schatten explores the biophysics and molecular biology of cell function in gametes, embryos, stem cells, as well as the mechanisms of cell division, the origins of developmental diseases, and the potential of stem cells.

116

Joel S. Schuman Distinguished Professor and Chairman of Ophthalmology, Eye and Ear Foundation Endowed Chair in Ophthalmology, Professor of Bioengineering; Director, UPMC Eye Center; Director, Louis J. Fox Center for Vision Restoration. MD, Mount Sinai School of Medicine, 1984. Ophthalmology Residency, Medical College of Virginia, 1988; Glaucoma Fellowship, Harvard Medical School, Massachusetts Eye and Ear Infirmary, 1990. Dr. Schuman is an inventor of optical coherence tomography, the most rapidly adopted technology in ophthalmology. Dr. Schuman’s research interests include technology development, imaging of the eye, regenerative medicine, laser-tissue interactions, aqueous outflow, and clinical pharmacology.

David E. Schmidt Assistant Professor of Otolaryngology and Bioengineering. PhD (Computational Mechanics), Carnegie Mellon University, 2009. Dr. Schmidt¹s research interests include middle ear pressure regulation, Otis Media, biodegradable metallic alloys and soft tissue mechanics.

Research activities focus on computational-based methods to characterize soft tissue biomechanics as an integrated component of novel medical device development and clinical interventions for biomedical applications. A current research focus is the development of a physiologically consistent mathematical model of trans middle ear mucosa gas exchange that has the potential to explain physiologic processes under normal and pathological conditions. Through such predictive modeling and simulation we seek to enhance our understanding of middle ear pressure regulation, which is central to the advancement of Otis Media clinical intervention. A second research area involves the establishment of design specifications and performance requirements for a new class of bio-absorbable metallic trachea stenting devices.

Walter Schneider Professor, University of Pittsburgh Department of Psychology, Executive Committee Member, Center for the Neural Basis of Cognition, Senior Scientist, Learning Research and Development Center. B.A., Psychology, University of Illinois, Ph.D., Psychology, Indiana University, Post-Doc., Neurophysiology, University of California, Berkeley. His research interests include cognitive neuroscience, cognitive control, semantic representation, attention and automaticity, skill acquisition, connectionist/hybrid modeling, brain imagining, and brain activity interpretation.

Andrew B. Schwartz Distinguished Professor of Neurobiology; Director of the Motorlab in the School of Medicine. PhD (Physiology), University of Minnesota, 1984. Dr. Schwartz’ research is centered on cerebral mechanisms of volitional arm movement and cortical control of neural prosthetics. He uses electrode arrays to record action potentials from populations of individual neurons in motor cortical areas while monkeys perform tasks related to reaching and drawing. A number of signal-processing and statistical analyses are performed on these data to extract movement-related information from the recorded activity. This basic research has been translated to neural prosthetics and shown to help paralyzed individuals regain arm and hand movements.

Ervin Sejdic Assistant Professor, Department of Electrical and Computer Engineering (Primary), Department of Bioengineering (Secondary), Department of Biomedical Informatics (Secondary), Intelligent Systems Program (Secondary). PhD (Electrical Engineering), University of Western Ontario (2008). Dr. Sejdic directs the iMED Laboratory (www.imedlab.org) and serves as the associate director of the RFID Center of Excellence at the University of Pittsburgh. His research aims to develop computational biomarkers indicative of age- and disease-related changes and their contributions to functional decline under normal and pathological conditions. This aim will be achieved through the development of clinically relevant solutions by fostering innovation in computational approaches and instrumentation that can be translated to bedside care.

117

Timothy C. Sell Associate Professor, Department of Sports Medicine and Nutrition (Primary), Departments of Orthopaedic Surgery and Bioengineering (Secondary). PhD (Rehabilitation Science), University of Pittsburgh (2004).

Dr. Sell serves as the Associate Director of the Neuromuscular Research Laboratory and is the Director of Graduate Studies in Sports Medicine. His research aims to examine risk factors for musculoskeletal injury and interventions to reduce the risk of injury.

Charles Sfeir Assistant Professor, Departments of Oral Medicine, Pathology, and Bioengineering. DDS (Dental Surgery) The UniversitĂŠ Louis Pasteur, Strasbourg France, 1990. PhD (Molecular Biology/Biochemistry) Northwestern University, 1996. Dr. Sfeir is actively involved in research focusing on two major topics: (1) Role of extracellular matrix in tissue engineering and biomineralization (2) The use of bioceramic nanoparticles in non-viral DNA gene delivery. Additionally, Dr. Sfeir and his research team in collaboration with Dr. Kumta, are focused on molecular biology and are concentrating on the development of ceramic nano-particles for non-viral gene therapy vectors mainly to be utilized in bone regeneration and other tissues.

Sanjeev G. Shroff Distinguished Professor of and Gerald McGinnis Chair in Bioengineering, Professor of Medicine, and Core Faculty, McGowan Institute for Regenerative Medicine. PhD (Bioengineering), University of Pennsylvania, 1981. Dr. Shroff's research interests include three main areas: (1) Relationships between left ventricular mechano-energetic function and underlying cellular processes, with a special emphasis on contractile and regulatory proteins and post-translational regulation of cardiac contraction (e.g., via phosphorylation or acetylation). Whole heart, isolated muscle, and single cell experiments are performed using various animal models, including transgenic mice. This basic information regarding structurefunction relationshis is currently being used to develop novel inotropic therapies that are based on altering cellular composition using genetic means and to optimize the fabrication protocol for engineered cardiac tissue such that it possesses the desired contractile and energetic properties. (2) The role of pulsatile arterial load (vascular stiffness in particular) in cardiovascular function and potential therapeutic applications of vascular stiffness-modifying drugs and/or hormones (e.g., relaxin). One of the hypotheses being investigated is that aberrant vascular stiffness changes are involved in the genesis of certain cardiovascular pathologies (e.g., preeclampsia, isolated systolic hypertension in elderly). Novel noninvasive measurement techniques are used to conduct longitudinal human studies, which are complimented by in vivo and in vitro vascular and cardiac studies with animal models. (3) The role of regional contraction dyssynchrony in global ventricular mechanics and energetics. In addition to basic research, Dr. Shroff and colleagues have developed and continue to develop novel, simulation-based material (i.e., mathematical models of biological systems and associated "virtual experiments") for education and engineering design.

Ian A. Sigal Assistant Professor, Ophthalmology and Bioengineering. PhD (Mechanical Engineering in Biomedical Engineering Collaborative Program), 2006, University of Toronto; MASc (Aerospace Engineering), 2001, University of Toronto; BSc (Physics), 1999, Universidad Nacional Autonoma de Mexico. Dr. Sigal joined the University of Pittsburgh on October 2010 and started the Laboratory of Ocular Biomechanics (www.ocularbiomechanics.org). The main goal of the lab is to help understand the causes and consequences of the differences in biomechanics between individuals. Current efforts are focused on understanding glaucoma and, more specifically, why some people lose vision due to glaucoma while others do not. This involves projects to predict and measure the short and long-term effects of altered intraocular pressure and the ability of an eye to adapt to changing conditions.

118

Marc Simon Assistant Professor of Medicine, Bioengineering, and Clinical Translational Science Heart Failure & Transplantation Cardiology / Comprehensive Pulmonary Hypertension Program Director, Heart Failure Research / Clinical Hemodynamics Core Facility Director, Vascular Clinical & Translational Research Center Scaife Hall S-555, 200 Lothrop St, Pittsburgh, PA 15213 412-802-3131, fax: 412-647-0595 Richard Simpson Richard Simpson received a B.S. in computer science from Virginia Tech in 1992. At the University of Michigan he earned an M.S. in Bioengineering in 1994, an M.S. in computer science and engineering in 1995, and a Ph.D. in Bioengineering in 1997. Dr. Simpson was certified as an assistive technology practitioner in 1997. As a graduate student, he played an active role in the development and testing of the NavChair Assistive Wheelchair Navigation System. The NavChair served as testbed for his Ph.D. research in adaptive shared control. Following his graduate studies, he worked at NASA Johnson Space Center developing control software and human-machine interfaces for life support systems. As a faculty member of Pitt?s School of Health and Rehabilitation Sciences (SHRS), Professor Simpson teaches graduate level courses in computer access and human-machine interaction. His primary appointment is in the Department of Rehabilitation Science and Technology (RST), and he has secondary appointments in the Department of Bioengineering and the Intelligent Systems Program. Professor Simpson also provides clinical rehabilitation engineering services in the areas of environmental control, computer access, and augmentative communication at the University of Pittsburgh (Pitt) Center for Assistive Technology (CAT).

Matthew Smith Assistant Professor, Department of Ophthalmology and Bioengineering. PhD (Neural Science), New York University, 2003. Between 2003 and 2010, Dr. Smith conducted postdoctoral research at Carnegie Mellon University and the University of Pittsburgh. Dr. Smith's research is aimed at understanding how our visual perception of the world is constructed from the activity of populations of neurons. His laboratory employs neurophysiological and computational approaches to this problem. He is also interested in applications of his research to the problems of vision restoration and neural prosthetics.

Tom Smithgall, Ph.D. William S. McEllroy Professor of Biochemistry and Chair, Microbiology and Molecular Genetics, School of Medicine. Ph.D. (Pharmacology), University of Pennsylvania School of Medicine (1986). Dr. Smithgallâ&#x20AC;&#x2122;s research is focused on the structure, function, and regulation of non-receptor protein-tyrosine kinases, as well as drug discovery campaigns targeting these key signaling molecules. Selective inhibitors of these kinases and their signaling partners have promise as therapeutic leads for cancer and infectious diseases.

Gwendolyn Sowa Associate Professor, Physical Medicine & Rehabilitation, Orthopaedics, and Bioengineering. PhD (Biochemistry), University of Wisconsin at Madison, 1997; MD University of Wisconsin at Madison, 2000. Dr. Sowa is currently conducting molecular level research on disc and spine degeneration and the mechanisms of back pain. She is Co-Director of the Ferguson Laboratory for Orthopedic Research, and has an active research program investigating the role of mechanical forces in disc degeneration, and biomarker discovery for low back pain. Dr Sowa is an award winning researcher and has presented her findings at international conferences and symposia.

Patrick J. Sparto Associate Professor, Physical Therapy, Bioengineering, and Otolaryngology. PhD (Biomedical Engineering), Ohio State University, 1998. Dr. Spartoâ&#x20AC;&#x2122;s primary research interests include the combined effects of aging and vestibular disease on postural control in an effort to reduce the risk of falling in older

119

adults. He is currently investigating how neuroimaging markers of brain decline affect mobility performance in older adults.

Alexander Star Associate Professor, Department of Bioengineering (Secondary), Department of Chemistry (Primary). PhD (Chemistry), Tel Aviv University (2000). Dr Star serves as Editor-in-Chief of the topical section on Biosensors for the journal Sensors. His research interests include chemistry of carbon nanomaterials and nanotechnology-enabled chemical and biological sensing.

George D. Stetten William Kepler Whiteford Professor of Bioengineering and Research Professor, Robotics Institute. MD, State University of New York, Health Science Center at Syracuse, 1991; PhD (Biomedical Engineering), University of North Carolina at Chapel Hill, 1999. Dr. Stetten’s current research interests include imageguided surgery using a device he invented called the Sonic Flashlight, and various adaptations of the underlying principle of in-situ image guidance. In addition he is developing image analysis techniques for automated identification and measurement of anatomical structures, based on a new framework called Shells-and-Spheres. He is developing a technology called FingerSight for the vision impaired, which involves fingertip video cameras linked to vibratory stimulators. He is also developing a new type of surgical tool that magnifies the sense of touch, enabling the surgeon to feel forces during delicate procedures. His teaching efforts include the development of a new open-standard testing format, enabling instructors to create and score their own multiple choice exams, called LaTeX Open-Format Testing (LOFT) and a student-built electronics instrumentation package called the PittKit. Walter Storkus, Ph.D. Professor, Department of Dermatology (Primary), Departments of Immunology, Bioengineering and Pathology (Secondary). PhD (Microbiology and Immunology), Duke University (1986). Dr. Storkus’ laboratory studies the immunobiology of tumors and designs immunotherapies for the treatment of cancer, leading to the development and performance of pilot phase I/II clinical trials for the treatment of patients with solid forms of cancer, including melanoma.

Mingui Sun Professor, Departments of Neurological Surgery, Bioengineering, and Electrical & Computer Engineering.

PhD (Electrical Engineering), University of Pittsburgh, 1989. Dr. Sun's research interests include biomedical sensors and instruments, implantable devices, image and video processing, neuroengineering, and electrophysiological signals such as EEG and MEG. His is currently investigating implantable devices for the brain, telemedicine, brain-computer interface, and development of electronic systems for overweight and obesity evaluation.

Prithu Sundd, PhD Assistant Professor of Medicine (Primary), Pulmonary, Allergy and Critical Care Medicine, Principal Investigator-Heart, Lung, Blood and Vascular Medicine Institute, Assistant Professor of Bioengineering (secondary), University of Pittsburgh. PhD (Chemical Engineering), Ohio University, 2008. The research in Dr. Sundd’s lab is focused on understanding the molecular and cellular mechanism of vaso-occlusive pathophysiology in Sickle Cell Disease (SCD) and how it leads to Acute Chest Syndrome. The research goals are achieved using an integrative physiologic approach, which involves use of in vivo imaging in transgenic humanized SCD mice and blood samples from SCD patients in in vitro microfluidic platforms.

Juan Taboas Assistant professor in Oral Biology at the School of Dental Medicine and the McGowan Institute for Regenerative Medicine, secondary appointment in Bioengineering. PhD (Biomedical Engineering), University of Michigan, 2004. Dr. Taboas works to create skeletal and craniofacial tissue regeneration

120

therapies through study of normal tissue development and degenerative disease progression in engineered microtissue models. His laboratory is located in the McGowan Center for Craniofacial Regeneration at the School of Dental Medicine. The lab investigates how the local cellular microenvironment (e.g. growth factors, mechanical forces, and signaling molecules) regulates mesenchymal stem cell and primary cell metabolism and differentiation into skeletal tissues. Work is underway to create microstructured growth plate-like cartilage to treat growth plate injury, skeletal dysplasia and complex bone loss. Dr. Taboas is interested in the role of growth factor gradients, G protein-coupled receptor signaling, and blood vessel derived factors on growth plate cartilage cell function. He also works on biomedical assay platforms: developing photo-patterning methods, polymeric scaffolds, and microfluidic bioreactors to screen drugs and test therapies in cartilage, kidney, and stem cell derived microtissues. Dr. Taboas has a record of multidisciplinary research, collaboration, and training, including mentoring of bioengineering graduate students and residents.

Changfeng Tai Associate Professor. Dr. Taiâ&#x20AC;&#x2122;s research interests include: (a). Develop new strategies to treat overactive bladder symptoms by combining electrical neuromodulation and pharmacological treatment. The goal of this project is to find new treatments for overactive bladder symptoms that are less invasive and highly effective with minimal side effect. (b). Design and develop novel neural prosthetic devices to restore urinary functions after spinal cord injury. Research interests are focused on the control of bladder and sphincter using electrical nerve stimulation. One of the goals for this research project is to restore the functions for urine storage and elimination after spinal cord injury. Two urological problems need to be solved for people with spinal cord injury: 1. how to inhibit the bladder overactivity during urine storage to prevent frequent incontinence; 2. how to inhibit tonic contraction of urethral sphincter during voiding to completely eliminate urine; (c). Computer simulation and modeling analysis of electrical nerve stimulation.

This project is aimed at understanding the mechanisms and biophysics of nerve response to extracellular electrical stimulation. It is focused on how to design the stimulation electrodes and stimulation waveforms to either excite or block the nerve using electrical current. The results from this project could significantly improve the design of neural prosthetic devices for restoring functions after neurological disorders.

Tatum Tarin Dr. Tatum Tarin is an assistant professor in the Department of Urology at the University of Pittsburgh Medical Center. His sub specialty is urologic oncology. Prior to this he was a clinical instructor and chief fellow at Memorial Sloan Kettering Cancer Center in New York. Dr. Tarin earned his bachelor of science at Revelle College, University of California San Diego. He then achieved his medical degree at the University of Pittsburgh School of Medicine. He did an internship and residency in surgery as well as a residency in urology at Stanford University Medical Center, where he became chief resident in urology. Dr. Tarin is a member of the Society of Urology Oncology, the Endourological Society, the American Urologic Association, and the Thai Physicians Association of America. He currently has six patents pending. He has participated grants to study "Dynamic Urethral Slings" as well as "Pathology Fundamentals for Urology Residents."

Scott Tashman Associate Professor, Orthopaedic Surgery, Bioengineering, and Mechanical Engineering; Director, Biodynamics Laboratory. PhD (Mechanical Engineering), Stanford University, 1992. Dr. Tashman has developed unique instrumentation for analyzing in vivo, dynamic function of human joints. His research focuses on the characterization, treatment and repair of joint soft tissue injuries and mechanical factors that drive the development and progression of chronic musculoskeletal conditions such as osteoarthritis and degenerative disk disease. Dr. Tashman's work crosses many bioengineering disciplines, including kinematics/dynamics of human movement, medical imaging, musculoskeletal modeling and instrumentation design. The Biodynamics Laboratory operates at the crossroads between the lab and the clinic; most

121

projects involve multidisciplinary teams of engineers, biologists and clinicians to address pressing orthopaedic problems.

Tobias Teichert Assistant Professor of Psychiatry in the Translational Neuroscience Program (TNP). After completing his PhD in Psychology at Philipps-University Marburg in Germany, Dr. Teichert held a Postdoctoral Research Scientist position in the Department of Neuroscience at Columbia University. His primary research interests include the neural mechanisms of decision-making and auditory cognition, as well as the development of an ultra-sound technique for non-invasive localized brain drug-delivery.

Kimimasa Tobita Research Asspcoate Professor, Developmental Biology, Pediatrics, and Bioengineering at the University of Pittsburgh; Director of Rangos Research Center Animal Imaging Core, Children's Hospital of Pittsburgh of UPMC. MD, Tokushima University, School of Medicine, Japan, 1989. Dr. Tobita completed general Pediatrics fellowship and worked as a clinical instructor/teaching assistant in the Department of Pediatric Cardiology, Heart Institute of Japan. He came to the United States in 1997 and worked in the Department of Pediatrics as a post-doctoral research fellow at the University of Rochester in Rochester, NY and at the University of Kentucky in Lexington, KY. Dr. Tobita's research interests include cardiomyocyte differentiation from muscle derived stem cells using 3D cardiac gel bioreactor, development of tissue engineered cardiac muscle graft, cardiovascular physiology/biomechanics of fetal circulation and congenital heart diseases, small animal imaging using high-resolution ultrasound, micro-CT/PET, and micro-MRI. Gelsy Torres-Oviedo Dr. Torres-Oviedo joined the Faculty in the Bioengineering Department at the University of Pittsburgh in January 2012. She is also Faculty at the Center for the Neural Basis of Cognition. Dr. Torres-Oviedo obtained her Ph.D. in Biomedical Engineering in 2007 at The Georgia Institute of Technology and Emory University. She trained as a postdoctoral fellow at The Johns Hopkins School of Medicine until December 2011. Dr. Torres-Oviedo's work is focused on human motor learning in the context of locomotion considering both the plasticity of the brain and the role of biomechanics in movement control. She is particularly interested in the adaptability of muscle coordination, especially in patients with cortical lesions, when learning a new walking pattern. Dr. Torres-Oviedo is also interested in understanding what determines the carry-over of movements learned on a treadmill to real-life walking situations. Her research approach consists of combining computational tools to develop theories that she tests with behavioral experiments. Results from her research are of potential interest to clinicians and researchers interested in using devices, like treadmills or robots, for movement rehabilitation.

Please visit: http://engineering.pitt.edu/MARGroup/Home/ Rocky S. Tuan Distinguished Professor, Orthopedic Surgery and Bioengineering. PhD (1977) from Rockefeller University, NY. Rocky Tuan, PhD, a world-renowned expert in stem cell biology and tissue engineering, is the founding director of the University of Pittsburghâ&#x20AC;&#x2122;s School of Medicineâ&#x20AC;&#x2122;s Center for Cellular and Molecular Engineering in the Department of Orthopedic Surgery, as well as the director of the Center for Military Medicine Research, and associate director of the McGowan Institute for Regenerative Medicine.

For more than 30 years, Dr. Tuan has studied the workings of the musculoskeletal system and its diseases, including cartilage development and repair, cell signaling and matrix biochemistry, stem cell biology, nanotechnology, biomaterials, and many other orthopedically relevant topics.

Robert Turner Associate Professor, Neurobiology and Bioengineering. PhD (Cellular and Molecular Biology), University of Washington, 1991. Dr. Turner earned his PhD at the University of Washington and worked as a Post Doc at Emory University under the direction of Dr. Mahlon R. DeLong (Neurology and Movement

122

Disorders). Dr. Turner’s research focuses on the basal ganglia and cortex in health and disease and neural interfaces (e.g., deep brain stimulation) for the treatment of movement disorders. He studies the spiking activity of multiple single neurons in monkeys trained to perform operant movement tasks in order to examine changes in the relationship between neuronal activity and behavior across the induction of disease states and their manipulation by deep brain stimulation therapy. Using this approach, Dr. Turner’s research seeks to understand the neuronal mechanisms that produce symptoms in diseases such as Parkinson’s disease and to improve the efficacy of neural interface therapies for those diseases.

Elizabeth Tyler-Kabara Assistant Professor, Neurological Surgery and Bioengineering. MD/PhD (Molecular Physiology and Biophysics) Vanderbilt University, 1997. Specialized areas of interest: Cerebral palsy; spasticity; dystonia; movement disorders; pediatric spinal disorders. Dr. Tyler-Kabara directs the Neural Enhancement Laboratory in the Department of Neurological Surgery. Current research projects in this laboratory include stem cell therapies in the treatment of both adult and pediatric traumatic brain injury. Current collaborations with the department of Bioengineering include exploring various techniques for improving neuronal electrode interfaces.

Alberto Vazquez Research Assistant Professor, Radiology and Bioengineering. PhD (Biomedical Engineering), University of Michigan, Ann Arbor, 2005. Research interests of Dr. Vazquez include investigating the role and properties of dynamic neuro-vascular and neuro-metabolic couplings in normal brain function, as well as the impact of pathologies, such as stroke and neuro-degeneration, on these processes using optical (twophoton microscopy, fluorescence microscopy), magnetic resonance and electrophysiological methods.

Gregory Vásquez Adjunct Assistant Professor, Department of Bioengineering; Senior Scientist, GeNO, LLC. Ph.D. (Chemistry), University of North Carolina at Chapel Hill (1992). His research interests include the designing and developing inhaled nitric oxide delivery systems for the treatment of cardiovascular and pulmonary diseases related to pulmonary arterial hypertension and idiopathic pulmonary hypertension. The high reactivity of nitric oxide, particularly in the presence of oxygen, makes the design and analysis of these systems challenging, and requires utilization of a variety of biochemical and analytical chemistry techniques. His research is also focused on biochemical mechanisms related to profibrotic disorders.

Oleg I. Velikokhatnyi Research Assistant Professor, Department of Bioengineering. PhD (Physics and Mathematics), Institute of Strength Physics and Materials Science, Tomsk, Russia (1994). Dr. Velikokhatnyi’s primary research interests are focused on developing and applying modern first-principles quantum mechanical and semiempirical approaches to design of biodegradable materials with controllable corrosion rate for orthopedic and craniofacial applications. His secondary research interests lie in a field of computational modeling and design of the materials for alternative energy sources (Li-ion rechargeable batteries, fuel cells, water electrolysis).

John A. Viator Professor, Department of Bioengineering (adjunct). PhD (Electrical Engineering), Oregon Health & Science University (2001). Dr. Viator is the inaugural Director of the Biomedical Engineering Program at Duquesne University. His research area is in biomedical optics, particularly in photoacoustics. His primary work concerns detection and capture of circulating tumor cells using photoacoustic flow cytometry. He also applies optical technologies to clinical problems in surgery, dermatology, radiology, and other areas of medicine.

123

Jeffrey Vipperman Professor, Mechanical Engineering and Bioengineering. PhD (Mechanical Engineering), Duke University, 1997. Dr. Vipperman's research interests include adaptive structures and materials, acoustics, vibrations, controls, signal processing, and medical device development. He is the founder and director of the Sound, Systems, and Structures Laboratory, which is well-equipped to conduct both experimental and numerical studies.

Yoram Vodovotz Professor of Surgery, Immunology, Clinical and Translational Science, and Communication Science and Disorders; Visiting Professor of Computational Biology. His research interests include the biology of acute inflammation in shock states, chronic inflammatory diseases, wound healing, malaria, and restenosis. His work utilizes mathematical modeling to unify and gain insight into the biological interactions that characterize these inflammatory conditions. As the Director of the Center for Inflammation and Regenerative Modeling (CIRM; www.mirm.pitt.edu/cirm) at the McGowan Institute for Regenerative Medicine, Dr. Vodovotz has been involved in the mathematical modeling of acute inflammatory states (e.g. septic or hemorrhagic shock, wound healing), including cellular and physiological elements, as part of a large, interdisciplinary collaborative team. He is also a co-founder of Immunetrics, Inc., a company that is commercializing this mathematical modeling work.

David A. Vorp Associate Dean for Research, Swanson School of Engineering, Professor of Bioengineering, Cardiothoracic Surgery and Surgery, and Core Faculty Member, McGowan Institute for Regenerative Medicine. PhD (Mechanical Engineering), University of Pittsburgh, 1992. maiDr. Vorp's research interests are in the area of vascular and urethral biomechanics and vascular tissue engineering. His current work focuses on the assessment of mechanical factors in the genesis and progression of cerebral and aortic aneurysms and in the development of tissue-engineered blood vessels. As part of the latter, Dr. Vorp's laboratory has focused on the role of stem cells in vascular tissue engineering, including the effect of in-vitro stimulation on stem cell differentiation. His group also has begun investigating an experimental stem cell treatment for aneurysm disease.

William R. Wagner Director, McGowan Institute for Regenerative Medicine; Professor, Surgery, Chemical Engineering, and Bioengineering. PhD (Chemical Engineering), University of Texas at Austin, 1991. The research interests of Dr. Wagnerâ&#x20AC;&#x2122;s group are in the area of cardiovascular engineering with projects that address medical device biocompatibility and design, tissue engineering, and imaging. The research group is comprised of graduate students in Bioengineering as well as post-doctoral fellows and junior faculty with backgrounds in surgery, engineering, and polymer chemistry. Projects span from in vitro to clinical studies.

James H-C. Wang Professor, Orthopaedic Surgery, Bioengineering, Mechanical Engineering & Materials Sciences, and Physical Medicine & Rehabilitation. PhD (Bioengineering) University of Cincinnati, 1996. Postdoctoral Fellow in Biomedical Engineering, Johns Hopkins School of Medicine, 1997, and Washington University at St. Louis, 1998. Dr. Wang is now the Director of the MechanoBiology Laboratory (MBL, http://www.pitt.edu/~mechbio/) in the Department of Orthopaedic Surgery, University of Pittsburgh School of Medicine. One of his research focuses in the MBL is the cellular and molecular mechanisms of tendinopathy, a prevalent tendon disorder that affects millions of Americans in the United States alone.

Another research focus is the mechanobiology of tendon stem cells (TSCs) and the pathogenic role of TSCs in the development of degenerative tendinopathy due to mechanical overuse/overloading. Still another is the use of autologous platelet-rich plasma (PRP), in combination with engineered tendon matrix (ETM) and stem cells, to repair injured tendons. In the MBL, interdisciplinary approaches, including cell biology, molecular biology, tissue engineering, and engineering mechanics, are applied to the investigations. New

124

technologies such as cell traction force microscopy (CTFM) and micropost force sensor array are currently used in determining cellular function in terms of cell contractility and motility.

Yadong Wang Yadong Wang is the William Kepler Whiteford Professor of Bioengineering with adjunct positions in Chemical Engineering and Surgery at the University of Pittsburgh. He obtained his Ph.D. degree in Chemistry at Stanford University in 1999, and performed his postdoctoral studies in biomaterials at MIT. He joined the Bioengineering Department at University of Pittsburgh in 2008 after serving as an assistant professor at the Georgia Institute of Technology for 5 years. His research focuses on creating biomaterials that present controlled chemical, physical, and mechanical signals to cells, tissues and organs. The ultimate goal is to control how the human body interacts with these materials. He is especially interested in applications of biomaterials in the cardiovascular, nervous and musculoskeletal systems. His team enjoys collaborating with other scientists and clinicians who share the same passion in translational research.

Current projects include vascular grafts, controlled release of proteins and microfabrication of biomaterials.

Wei Wang Assistant Professor, Physical Medicine & Rehabilitation and Bioengineering. PhD (Biomedical Engineering), Washington University in St. Louis, 2006; MD, Peking University Health Science Center, 1999. Clinical and Translational Science Institute (NIH KL2) Clinical Research Scholar 2010-2015. Dr. Wang’s research at the University of Pittsburgh focuses on neural engineering, including brain-computer interfaces, invasive and noninvasive neuroimaging, motor system neurophysiology, neurorehabilitation, and human brain mapping for motor and language functions.

Jonathan Waters Professor, Anesthesiology and Bioengineering; Chief of Anesthesia Services at Magee Women’s Hospital, UPMC; Medical Director, Patient Blood Management Program at UPMC; and Medical Director in the Blood Management Division of Procirca, Inc. MD, George Washington University; residency at New York University/Bellevue Hospital Center. Dr. Waters’ research interests include: improving obstetrical outcomes by minimizing transfusion; red cell rheologic changes associated with anesthetia; quality improvement research associated with patient blood management. He is a Founding Member of the Society for the Advancement of Blood Management, for which he has also served as president (2007-2009). Dr. Waters is also Chair of the Transfusion Review Committee at Magee Women’s Hospital.

Peter D. Weaden, MD, PhD Associate Professor Department of Cardiothoracic Surgery (primary) and Bioengineering (secondary). MD, West Virginia University (1993); PhD (Pharmacology and Toxicology), West Virginia University (1999).

Dr. Wearden a pediatric and congenital heart surgeon, is the Director of Mechanical Cardiopulmonary Support and Surgical Director of Heart and Lung Transplantation at Children's Hospital of Pittsburgh. His research is focused development of devices to support the pediatric heart and lung, the translation of of pediatric devices in the clinical setting, and tissue engineering for pediatric applications.

Douglas Weber Associate Professor, Bioengineering and Physical Medicine & Rehabilitation. PhD (Bioengineering), Arizona State University, 2001. Dr. Weber completed two years of postdoctoral training in the laboratory of Dr. Richard Stein at the University of Alberta in Edmonton Alberta, Canada. In 2005, he joined the University of Pittsburgh, where he and his staff conduct fundamental research into the role and nature of sensory feedback in motor control. Their mission is to advance rehabilitation science and practice through scientific discovery and the development of neuroprosthetics for assisting and restoring motor function after nervous system injury and limb loss. Current research projects include: 1) the use of functional electrical stimulation (FES) to improve upper extremity function during stroke rehab, and 2) the development of motor and sensory nerve interfaces to restore natural movement and sensation for prosthetic limbs. Dr.

125

Weber is currently on leave from the University working as a Program Manager in the Biological Technology Office at the Defense Advanced Research Projects Agency where he is leading three programs aimed at developing advanced neurotechnologies for fundamental research and clinical applications.

Justin Weinbaum Research Assistant Professor, Department of Bioengineering (Primary) and Member, McGowan Institute for Regenerative Medicine (Secondary). PhD (Molecular Cell Biology) Washington University in St. Louis (2007). Dr. Weinbaum’s Vascular ECM Dynamics Laboratory focuses on extracellular matrix remodeling in the context of vascular tissue engineering and regenerative medicine. He is also the Associate Director of the Vascular Bioengineering Laboratory, which is developing a stem-cell based tissue-engineered vascular graft and a new therapy to prevent pathologic ECM remodeling during aortic aneurysm progression.

Alan Wells Thomas J Gill III Professor of Pathology, Professor of Bioengineering. MD, Brown University (1988); DMSc, Karolinska Institute, Stockholm, Sweden (1982). The Wells' Laboratory research program, in close collaboration with its research partners, aims to understand cell migration in terms of how motility processes are regulated, and understand how this regulation of migration plays a role in physiologic and pathologic situations. Dr. Wells is integrating the knowledge gained from our biochemical and biophysical mechanistic studies into our investigations concerning conditions of dysregulated (tumor invasion) and orchestrated (wound healing and organogenesis) cell motility and cell behavior plasticity. The latter aspects drive our interest in bioengineering principles to develop organ regeneration. As part of understanding the motility response, we are investigating both how the particular integrated cell responses of motility and phenotype is selected from among others and the metabolic consequences of these changes. This integrative approach provides reinforcing insights and novel avenues for exploration into the basic signaling pathways as well as functioning of whole organism. We are now pushing these investigations into all human models of ex vivo organotypic microphysiologic systems.

Erik C. Wiener Associate Professor, Radiology and Bioengineering. PhD (Biophysics), University of Pennsylvania, 1988.

Dr. Wiener’s major area of research is in the molecular and cellular imaging of cancer. In particular, he uses Magnetic Resonance Imaging (MRI) for use in understanding tumor biology and physiology.

Peter Wipf Distinguished University Professor, Department of Chemistry (Primary), Department of Bioengineering (Secondary), Department of Pharmaceutical Sciences (Secondary). PhD (Chemistry), University of Zürich (1987). Dr. Wipf serves as the Co-Leader of the Cancer Therapeutics Program in the University of Pittsburgh Cancer Institute. His research applies the design of new synthetic methods for the total synthesis of natural products and the discovery of novel pharmaceuticals and biological probe molecules.

Savio L-Y. Woo Distinguished University Professor and Founder and Director of the Musculoskeletal Research Center (MSRC) in the Department of Bioengineering. PhD, University of Washington at Seattle, 1971; DSc (Honorary), California State University at Chico, 1998; DEng (Honorary), Hong Kong Polytechnic University, 2008. Dr. Woo has established interdisciplinary programs to provide educational and research opportunities on the mechanical properties of soft tissues (tendons, ligaments and cartilage) and the effects of growth, aging and healing on these properties. Dr. Woo’s research interests include the effects of stress and motion on healing and repair of soft tissues; theoretical and experimental studies of the nonlinear viscoelastic and mechanical properties of biological tissues; kinematics of synovial joints, including the knee and shoulder, by developing a novel robotic universal force-moment sensor testing system to assess the roles of various soft tissues; functional tissue engineering approaches involving the use of gene therapy

126

and bioscaffolds, i.e., porcine extracellular matrix (ECM), to improve the healing of injured ligaments and tendons. In more recent years, Dr. Woo’s research has focused on the development of biodegradable metallic materials to assist the healing of ligaments and tendons as well as for implantable devices for orthopaedic applications.men.

Joanne Yeh Associate Professor, Structural Biology and Bioengineering. PhD, University of California @ Berkeley, 1994. Professor Yeh’s research focuses on atomic resolution, X-ray structure determination of membrane proteins, redox enzymes, and large multi protein complexes related to cellular regulation and metabolism.

Professor Yeh is the Director of the University of Pittsburgh SOM X-ray Crystallography Facility and is the Director of the X-ray Crystallography Core for the Pittsburgh Center for HIV Protein Interactions, an NIH funded P50 Structural Biology Center for the study of HIV-related proteins and early-entry events. In addition to her structure-function studies, Professor Yeh has developed various methods related to macromolecular crystallography and biochemical characterization of membrane proteins. In the area of bioengineering, the Yeh laboratory developed the coordinated biosensing approach for producing highly specific and sensitive nanobiosensors, based on the three-dimensional structures of enzymes and other proteins as detectors of target ligands and biomarkers of diseases.

Minhee Yun Associate Professor, Electrical & Computer Engineering, and BioEngineeirng. PhD Arizona State University, 1998.

Dr. Yun's major research interests include biomedical sensors and devices, nanoelectronics, and biodevice materials. Dr. Yun is currently working on development of biomarker detections based on nanomaterials such as nanowires and carbon-based materials; in particular, his is focused on cardiovascular disease (CVD) cancer biomarker detections.

Henry Zeringue Adjunct Professor, Department of Bioengineering (Primary) and Manager of Predictive and Analytic Modeling, Division of Enterprise Informatics, Highmark Inc. Henry's degrees are in Biomedical Engineering and Electrical Engineering with a Ph.D. in Biomedical Engineering from University of Wisconsin (2003) where he developed algorithms for genetic sequence design for mutation detection as well as microfluidic devices for assisted reproduction in livestock. He was a postdoctoral fellow in neurobiology at MIT where he studied development of the visual system. His current position at Highmark Inc. focuses on the development of analytic techniques and computational models to understand, evaluate and predict members, providers and operations.

Xudong Zhang Associate Professor, Mechanical Engineering and Materials Science, Orthopaedic Surgery, and Bioengineering. PhD, University of Michigan, 1997. Dr. Zhang is the Director of Musculoskeletal Modeling Lab and Co-director of Sports Orthopaedic Research Lab. His primary research field is musculoskeletal biomechanics, wherein his work spans theory, experiment, and computational modeling.

His focus has been on developing and validating biomechanical models and simulations for clinical and industrial applications. Such applications include, but are not limited to, treatment efficacy and prevention strategy evaluation, computer-assisted orthopaedics and rehabilitation, digital modeling for ergonomics and human-centric system design, prosthetics and robotics.

Bin Zheng Research Professor, Radiology and Bioengineering. PhD (Electrical Engineering), University of Delaware, Newark, DE, 1993. Dr. Zheng’s major area of the research is the development and evaluation of computeraided diagnosis (CAD) schemes of biomedical images. His current research interests and projects include (1) developing interactive CAD schemes for mammograms using content-based image retrieval (CBIR) approaches, (2) developing CAD schemes for the early detection of interstitial lung diseases and pulmonary

127

embolisms using CT images, (3) developing a new breast cancer risk prediction model based on resonancefrequency electrical impedance spectroscopy (REIS) technology, and (4) developing digital pathology system including the microscopic image scanner and CAD schemes to improve accuracy and efficiency in diagnosis of chromosome and FISH (fluorescent in situ hybridization) images.

Leming Zhou Assistant Professor, Health Information Management in the School of Health and Rehabilitation Sciences and Bioengineering in the Swanson School of Engineering. PhD (Physics and Computer Science), George Washington University. Dr. Zhou’s research interests include computational modeling and simulation, algorithm and software development, genomic data analysis, high performance computing, and data mining.

Chemical and Petroleum Engineering Mohammad M. Ataai Professor, Chemical and Petroleum Engineering and Bioengineering, Ph.D. (Chemical Engineering), Cornell University, 1986 - Dr. Ataai’s research interests include bioprocess engineering, large-scale cell culture and fermentation, immobilized enzyme, protein purification, metabolic engineering, cellular metabolism and physiology.

Anna C. Balazs Distinguished Professor of Chemical Engineering and Robert von der Luft Professor of Chemical and Petroleum Engineering, Ph.D., Massachusetts Institute of Technology, 1981 - Dr. Balazs’ research involves using statistical mechanics and computer simulations to model polymeric systems. Her current research is focused on modeling the properties of polymer blends, the aggregation of associating polymers, and polymer-surface interactions. She is also interested in the role of polymers in biophysics and has investigated micelle formation, the controlled release of drugs through porous polymers, and the binding of ligands to biopolymers.

Ipsita Banerjee Assistant Professor, Chemical and Petroleum Engineering, Ph.D., Rutgers University, 2005 - Dr. Banerjee’s research interests focus on the area of process systems engineering and optimization and their applications in different chemical and bio-engineering problems. She is currently developing novel methods for differentiating embryonic stem cells to the pancreatic lineage and applying systems engineering principles in analyzing the regulatory network of the differentiating cell population. She is also interested in reaction network modeling energy efficient combustion processes.

Eric J. Beckman George M. Bevier Professor of Engineering and Co-Director, Mascaro Sustainability Initiative, Ph.D. (Polymer Science and Engineering), University of Massachusetts, 1988 - Dr. Beckman’s research focuses on molecular design to support (a) creation of greener chemical products and (b) synthesis of materials to support biomedical research.

Cheryl A. Bodnar Assistant Professor (Teaching Track), Chemical and Petroleum Engineering; Ph.D. (Chemical Engineering), University of Calgary, 2006 - Dr. Bodnar’s Research Interests relate to the incorporation of active learning techniques in undergraduate classes (problem based learning, games and simulations, etc.) as well as integration of innovation and entrepreneurship into the Chemical and Petroleum Engineering curriculum. She is actively engaged in the development of a variety of informal science education

128

approaches with the goal of exciting and teaching K-12 students about regenerative medicine and its potential.

Harvey S. Borovetz Professor, Chemical and Petroleum Engineering; Professor and Chairman, Department of Bioengineering; Robert L. Hardesty Professor of Surgery; Ph.D. (Bioengineering), Carnegie Mellon University, 1976 - Dr. Borovetz's current research interests are focused on the design and clinical utilization of cardiovascular organ replacements for both adult and pediatric patients. Since 1986 Dr. Borovetz has provided academic leadership to the University's clinical bioengineering program in mechanical circulatory support.

Ioannis Bourmpakis (Giannis Mpourmpakis) Assistant Professor, Chemical and Petroleum Engineering, Ph.D. (Theoretical and Computational Chemistry), University of Crete. 2006 - Dr. Mpourmakis’s research expertise is interdisciplinary, blending concepts and techniques from Chemistry, Physics, Materials Science and Chemical Engineering.

Andrew Bunger Assistant Professor, Civil & Environmental Engineering, Ph.D. (Geological Engineering), University of Minnesota, 2005 - Dr. Bunger’s research interests are hydraulic fracturing; Interaction between shale formations and drilling fluids; Emplacement mechanics of magma intrusions; Fracture mechanics; Poroelasticity; core discing.

Shiao-Hung Chiang Professor Emeritus, Chemical and Petroleum Engineering, Ph.D. (Chemical Engineering), Carnegie Mellon University, 1958 - Dr. Chiang’s research covers a wide spectrum of topics ranging from the study of basic mass transfer mechanisms to the development of a novel coal beneficiation process.

Julie L. d’Itri Associate Professor, Chemical and Petroleum Engineering, Ph.D. (Chemical Engineering), Northwestern University, 1993 - Dr. d’Itri’s research program is that of using heterogeneous catalysis as a means of solving critical environmental problems. At one end of the spectrum this involves understanding and developing catalytic processes for reducing emission of hazardous pollutants. At the other end of the spectrum are projects aimed at development of entirely new catalytic processes which avoid use and generation of environmentally hazardous materials.

Robert M. Enick Bayer Professor and Vice Chair for Research, Chemical and Petroleum Engineering, Ph.D. (Chemical Engineering), University of Pittsburgh, 1985 – Dr. Enick's research focuses on experimental investigations of carbon dioxide-based supercritical fluid technology. Examples include: direct carbonation of metalcontaining hazardous waste; generation of microcellular foams using CO 2 ; application of fluorinated thiols to metal surfaces using liquid carbon dioxide; and increasing the viscosity of liquid carbon dioxide.

William J. Federspiel W.K. Whiteford Professor, Chemical and Petroleum Engineering, Bioengineering, and Surgery, Ph.D. (Chemical Engineering), University of Rochester, 1983 - Dr. Federspiel’s research areas and interests include biomedical fluid mechanics and mass transfer, cardiopulmonary bioengineering, artificial organs, and tissue engineering. Dr. Federspiel directs research in the Artificial Lung Laboratory in the McGowan Institute of Regenerative Medicine and has a secondary appointment in the Department of Surgery at the School of Medicine. The ultimate goal of work within the laboratory is the development of improved cardiovascular-related medical devices and therapies for patients.

129

Di Gao Associate Professor and W.K. Whiteford Faculty Fellow, Chemical and Petroleum Engineering, Ph.D. (Chemical Engineering) 2004, University of California at Berkeley – Dr. Gao’s research interests include synthesis, assembly and characterization of novel nanostructures, and the integration of these nanostructures into functional devices and systems for technological applications such as biomedical and environmental sensors.

Gerald D. Holder Professor, Chemical and Petroleum Engineering, and U.S. Steel Dean, Swanson School of Engineering, Ph.D. (Chemical Engineering), University of Michigan, 1976 - Dr. Holder’s research interests include high pressure phase behavior, and thermodynamic properties of gas hydrates and supercritical fluids.

J. Karl Johnson W.K. Whiteford Professor, Chemical and Petroleum Engineering, Ph.D. (Chemical Engineering), Cornell University, 1992 - Dr. Johnson’s current research interests are focused on molecular thermodynamics, atomistic computer simulations, and theories of complex systems. The ultimate goal of this work is to develop engineering models for industrially important materials and processes.

John A. Keith Assistant Professor, Chemical and Petroleum Engineering, Ph.D. (Chemistry), California Institute of Technology, 2007 - Dr. Keith’s research interests are Computational chemistry applied to catalysis, energy, and Materials.

George E. Klinzing W.K. Whiteford Professor, Chemical and Petroleum Engineering, Ph.D. (Chemical Engineering), Carnegie Mellon University, 1963 - Dr. Klinzing’s current research covers the fields of pneumatic conveying, particulate systems and solids processing. Research has been concentrating on dense phase pneumatic conveying probing the fundamental phenomena both experimentally with novel instrumentation and theoretically with new models based on experimental findings.

Prashant Kumta Edward R. Weidlein Chair Professor, Swanson School of Engineering and School of Dental Medicine, Department of Bioengineering, Chemical and Petroleum Engineering, Mechanical Engineering and Materials Science, Department of Oral Biology, Ph.D. (Materials Science and Engineering), University of Arizona, 1990 – Dr. Kumta’s research interests cover the two broad areas of Energy storage and Biomaterials. The main focus of research in both these areas is to develop novel low temperature approaches and study the relationships of the process parameters, the ensuing microstructure and crystallographic structure to the electrochemical activity in the former and biological response in the latter.

Lei Li Assistant Professor, Chemical and Petroleum Engineering, PhD Macromolecular Science and Engineering Center, University of Michigan, 2001. Professor Li’s current research interest focuses on polymer thin and ultrathin films at surfaces and interfaces. The key is to understand the polymer/polymer and polymer/substrate interactions governing the various properties, e.g. mechanical, optical, electrical and tribological properties, of polymer thin films. Based on this understanding, novel materials are developed for applications in nanotechnology and bio-systems. Examples are: Relaxation and dynamics of polymer thin films on various substrates; Mechanical properties of polymer thin films; Ultrathin perfluorinated polymer films for anti-friction and anti-corrosion application in micro and nano devices; Novel composite polymer thin films with low friction and wear for biomedical implants; Fabrication of polymer thin films with low surface energy and enhanced anti-adhesion properties via photochemistry approach.

130

J. Thomas Lindt Professor Emeritus, Chemical and Petroleum Engineering, Ph.D., University of Delft, 1971 - Dr. Lindt is internationally recognized as a leader in mathematical modeling of polymer processing operations and supervises research programs associated with polymer processing. His research interests include reactive processing of polymers, isolation of polymers from dilute solutions and emulsions, formation of polymeric composites containing oriented graphitic particles/fibers, morphology development in polymer blends, and rheology of polymer solutions in supercritical fluids associated with structure development in microcellular foams.

Steven R. Little Chairman, Associate Professor and CNG Faculty Fellow, Chemical and Petroleum Engineering, Bioengineering, Immunology and Medicine, Ph.D. 2005, Massachusetts Institute of Technology, 2005 – Dr. Little’s research interests are focused on biomaterial design and controlled drug delivery in the areas of smart immunotherapeutics and regenerative medicine.

Joseph J. McCarthy W.K. Whiteford Professor and Vice Chair for Education, Chemical and Petroleum Engineering, Ph.D., 1998, Northwestern University. Dr. McCarthy’s research interests lie in the area of solids flow and transport phenomena in particulate systems. Immediate concerns include flow and mixing of cohesive particles, breakup and fracture of particle aggregates, and heat transfer in discrete and particulate media.

One of the long range goals of his work is the development of a more unified fundamental understanding of transport phenomena in particle systems.

Badie I. Morsi Professor and Director of Petroleum Engineering Program, Chemical and Petroleum Engineering, Sc.D., Institut National Polytecnique de Lorraine, 1982 - Dr. Morsi’s current research involves different aspects of Chemical, Environmental, and Petroleum Engineering. In Chemical Engineering, he is leading an extensive research effort in order to design and scale-up various multiphase reactors, such as bubble columns, slurry bubble-columns, high-pressure/temperature stirred vessels, and trickle-bed reactors. His research group is currently measuring the hydrodynamics and mass transfer characteristics in a number of important chemical processes, including methanol synthesis, cyclohexane oxidation, propylene polymerization, benzoic acid oxidation, and Fischer-Tropsch synthesis. In Environmental Engineering, he is primarily concerned with kinetic studies, modeling, and optimization of the regeneration step in a twostep advanced dry-sorbent process for simultaneous removal of NO x and SO x from flue gas. In Petroleum Engineering, he supervised a research on enhanced oil recovery using carbon dioxide.

Robert S. Parker Associate Professor and B.P. America Faculty Fellow, Chemical and Petroleum Engineering, Ph.D., University of Delaware, 1999. The research focus of Professor Parker's group is process modeling and control, with an interest in biomedical systems. Advanced controllers typically use, either explicitly or implicitly, in response to setpoint changes and/or disturbances. Hence, the development of accurate, potentially nonlinear, models of process behavior plays an important role in controller design. Specific research interests include: cancer modeling and therapy; blood glucose control in diabetic patients; analytical solutions to model-based optimal control problems; and empirical model identification and validation.

John F. Patzer II Associate Professor, Surgery, Chemical and Petroleum Engineering and Bioengineering, Ph.D. (Chemical Engineering). Stanford University, 1980. Dr. Patzer’s research interests lie in the application of reaction engineering and transport phenomena to biomedical engineering problems, particularly in the artificial organ and organ assist arena. With a primary appointment in the Department of Surgery, Dr. Patzer

131

coordinates an active research program in preclinical and clinical development of liver assist devices and biohybrid artificial liver systems in the Thomas E. Starzl Transplantation Institute. His other research interests include artificial pancreas and kidney.

John W. Tierney Professor Emeritus, Chemical and Petroleum Engineering, Ph.D. (Chemical Engineering), Northwestern University, 1951 - Dr. Tierney’s research interests are reactor engineering, process modeling and simulation, and equilibrium staged separations. Much of Dr. Tierney’s research is related to developing sources other than petroleum for liquid transportation fuels.

Sachin Velankar Associate Professor, Chemical and Petroleum Engineering, Ph.D. (Chemical Engineering), University of Delaware, 1999 Dr. Velankar’s research deals with polymer science and engineering, and is especially focused on studying the rheological properties of complex polymeric fluids. The overall goal is to gain insight into the interplay between processing, structure, and properties of polymeric materials, and to exploit this insight to design better materials.

Götz Veser Nickolas A. DeCecco Professor, Chemical and Petroleum Engineering, Dr. rer. nat. (Physical Chemistry) Fritz-Haber-Institute of the Max-Planck-Society, 1993 - Dr. Veser's research is in the field of catalytic reaction engineering, where his interests range from the detailed modeling of catalytic reactions and reactors, to the synthesis of novel catalysts, the development of catalytic microreactors, and the design of integrated reactor concepts. His research thus attempts to integrate engineering aspects on all length scales through well-designed experiments and numerical simulations. A current focus of his research is on the catalytic partial oxidation of hydrocarbons at high-temperature millisecond contact-time conditions.

William R. Wagner Professor, Surgery, Chemical and Petroleum Engineering and Bioengineering, Director of the McGowan Institute for Regenerative Medicine, Ph.D. (Chemical Engineering), University of Texas at Austin, 1991 Dr. Wagner's research addresses a variety of issues in artificial organ development ranging from clinical studies to theoretical design work. Cardiovascular devices are of primary interest, particularly the complications that result from blood interactions with artificial surfaces (e.g. thrombosis). Current projects also fall into the area of cardiovascular tissue engineering, with a focus on material design to orchestrate cellular growth or function.

Irving Wender Distinguished University Research Professor, Chemical and Petroleum Engineering, Ph.D. University of Pittsburgh, 1950 - Dr. Wender’s research interests include homogeneous and heterogeneous catalysis with these molecules. He is interested in catalytic reactions involved in the conversion of synthesis gas to fuels and chemicals. An important area of research is in the conversion of coal and natural gas to liquids and chemicals by indirect liquefaction (via gasification to synthesis gas) and by novel methods of indirect liquefaction. Research has involved the use of solid superacids of zirconium and related anion-modified oxides as finely dispersed disposable and environmentally acceptable catalysts for cracking of FischerTropsch waxes.

Judy Yang Nickolas A. DeCecco Professor, Chemical and Petroleum Engineering, Ph.D., Physics (minor: materials science and engineering), Cornell, 1993. Professor Yang's research interests include gas-metal reactions, oxidation, high temperature corrosion, surface chemistry and physics, interfaces, catalysis, nanoparticles and nanostructured materials, as well as the use and development of advanced electron microscopy techniques, such as in situ, Z-contrast, and EELS. Her current focused research topic is the fundamental

132

kinetics of surface oxidation reactions of metallic systems by in situ high vacuum controlled environment electron microscopy. Another area of interest is the determination of the supported structure of nanoparticles that are used in heterogeneous catalysis, by Z-contrast, EDS and HREM.

Civil and Environmental Engineering Jorge Abad Assistant Professor, Civil and Environmental Engineering, Ph.D., University of Illionis, 2007 – Dr. Abad’s research interests are a combination of fundamental and applied topics. Fundamental topics include the mechanics of sediment transport, the high-resolution description of hydrodynamics and morphodynamics in subaerial and submarine meandering channels, the long-term prediction of river morphodynamics, the development of computational fluid dynamics (CFD) models for environmental flows, environmental hydrodynamics, and transport and mixing processes. Applied topics include river restoration, bank protection using in-stream structures, development of geographic information systems (GIS) tools for river management, and the development of CFD models for hydraulic structures (e.g., drop shafts and fish passage/canoe chutes).

Kyle Bibby Assistant Professor, Civil and Environmental Engineering, Ph.D., Yale University, 2012 - Dr. Bibby’s interests center around understanding the presence, ecology, and diversity of microorganisms, such as viruses and bacteria, in an environmental engineering context. Microorganisms are by far the most abundant and genetically diverse biological entities on our planet and are at the core of many of society’s environmental challenges, including sustainable energy production, waste treatment, and environmentally transmitted disease. In the Bibby Lab, emerging molecular biology techniques such as proteomics, genomics, metagenomics and transcriptomics are integrated with fundamental, quantitative environmental engineering practice to develop new insights and solutions to these problems.

Melissa Bilec Associate Professor, Civil and Environmental Engineering, Ph.D., University of Pittsburgh, 2007 - Dr. Bilec's research and teaching interests encompass engineering issues related to sustainability, green design, and construction. Her recent research efforts include not only creating a practical framework for hybrid life cycle assessment modeling, including uncertainty and visualizations, but also modeling on-site construction processes and support services. She is conducting research related to green building metrics to understand and evaluate high-performance buildings. Dr. Bilec has experience in funding and managing sustainable transportation projects, including the Hot Metal Pedestrian Bridge project.

John Brigham Assistant Professor, Civil and Environmental Engineering, Ph.D., Cornell University, 2008 – Dr. Brigham is interested in fundamental concepts in mechanics and computation which span a broad range of applications, from assessing service life of civil, marine, or aircraft structures to diagnosing physiological changes in biological structures. In particular, he is interested in the development of efficient computational methods for the representation of multiphysics and multiscale systems, solution strategies for inverse problems associated with nondestructive and noninvasive testing, and numerical modeling of biological systems Daniel Budny Associate Professor, Civil and Environmental Engineering, and Academic Director, Freshman Programs, Ph.D., Michigan State University, 1988 - Dr. Budny’s research has focused on the development of programs that assist entering freshman and academically disadvantaged engineering students, to succeed during their first year. Dr. Budny has also been awarded the 1996 ASEE Dow Young Educator Award, 1998 ASEE Ronald Schmitz Outstanding Service Award and the 1992 FIE Ben Dasher Award. He serves

133

on the ASEE board of directors. He also served as the 1999 Frontiers in Education Conference General Chair and proceedings editor for the 1995 and 1997-99 FIE Conferences.

Andrew Bunger Assistant Professor, Civil and Environmental Engineering, Ph.D., University of Minnesota, 2005 - Dr. Bunger’s research has focused primarily on the basic mechanisms which determine how hydraulic fractures grow through rocks by using experimental, analytical, and numerical methods. His study of hydraulic fracturing application areas has included stimulation of unconventional gas and geothermal reservoirs, preconditioning ore bodies to improve the effectiveness of caving‐type mining methods, and modeling intrusion of magma in the Earth’s crust. His secondary research interest is the interaction between shale formations and drilling fluids with the main application in wellbore stability during the development of oil and gas wells.

Leonard W. Casson Associate Professor, Civil and Environmental Engineering, Ph.D., University of Texas, 1987 - Dr. Casson's research emphasizes Adsorption, fate, transport and transformation of chemicals, particles and environmental pathogens in unit operations and the natural environment. Recently focusing on security and sustainability infrastructure of critical infrastructure systems. These issues include disinfection issues, vulnerability assessment methodologies, analytical techniques and emergency response, remediation and recovery plans applied to water treatment, storage and distribution systems and wastewater collection and treatment systems.

Kent A. Harries Associate Professor, Civil and Environmental Engineering, Ph.D., McGill University, Montreal Canada, 1995. - Dr. Harries’ research interests include the seismic design and retrofit of building structures, the design and behavior of high-rise structures, the use of non-traditional materials (FRP, HPC, RPC) in civil infrastructure, applications of full-scale structural testing and the history and philosophy of science and technology.

Anthony Iannacchione Associate Professor, Civil and Environmental Engineering, Ph.D., University of Pittsburgh, 1997 – Dr. Iannacchione joined the University of Pittsburgh after a 33 year career with the U.S. Bureau of Mines and National Institute for Occupational Safety and Health where he conducted research on health, safety, and environmental issues related to the U.S. Minerals Industry. His recent interests include strata control and mine ventilation engineering, mining-induced seismic analysis, and major hazard risk assessment.

Vikas Khanna Assistant Professor, Civil and Environmental Engineering, Ph.D., University of Ohio, 2009 - Dr. Khanna's research and teaching interests are in the general areas of sustainability science and engineering, industrial ecology, and role of environmental policy in engineering decision-making. The primary goal of his research is to develop and apply tools and techniques for understanding the sustainability of engineered products and processes. Current focus is on studying the life cycle environmental impacts of advanced biofuels that can act as drop in replacements for fossil fuels, environmental evaluation of nanotechnology, including life cycle energy impacts of carbon nanofibers and polymer nanocomposite materials. He is also developing integrated multiscale economic-environmental models for evaluating the role of environmental policies such as carbon tax and assessing risks to complex industrial systems.

Xu Liang Professor, Civil and Environmental Engineering, Ph.D., University of Washington, 1994 - Dr. Liang's fundamental research interests include: (1) to discover and reveal fundamental laws that govern water and energy cycles, and (2) to investigate how the water and energy cycles affect the health of our environment

134

and ecological systems, and how they influence the transport and cycling of nutrients and pollutants at different scales, such as at local, regional, continental, and global scales. She is also very interested in research topics leading to improving accuracies on weather forecasts, droughts and floods, and on climate studies; scaling and data assimilation using in situ and remotely sensed measurements; impacts of climate change on diseases re-occurrences and re-distributions, and on sustainable water resources and environment; and applications of emerging information technology for sustainable ecological system and water resources management.

Jeen-Shang Lin Associate Professor, Civil and Environmental Engineering, Sc.D., Massachusetts Institute of Technology, 1982 - Dr. Lin works in the areas of soil mechanics and soil dynamics. He has conducted research in back analysis using existing field measurements, such as deriving in-situ soil properties based upon strong motion records. He is currently interested in the coupling of continuous and discontinuous analysis for both soils and rocks. He has also worked on computer simulation of various soil experiments using particles.

John F. Oyler Adjunct Associate Professor, Civil and Environmental Engineering, Ph.D., Carnegie Mellon University, 1972 - Dr. Oyler's professional interests are specialized in Civil Engineering Materials, Solid Mechanics, and Structural Engineering. He worked for Dravo Corporation from 1953 to 1987, Daxus Corporation from 1988 to 1991, and formed Oyler Consulting Services in 1991 as a sole proprietorship.

Piervincenzo Rizzo Associate Professor, Civil and Environmental Engineering, Ph.D., University of California San Diego, 2004 - Dr. Rizzo's academic and professional interests are in the fields of nondestructive testing/evaluation, structural health monitoring, signal processing and automatic pattern recognition for real-time prognosis of structures, and implementation of embedded sensor network for health monitoring of civil, mechanical and aerospace structures. His recent works focused on the development of a rail flaw detection system based on non-contact hybrid laser/air-coupled ultrasonic sensors to improve the reliability and the speed inspection of current systems, and on the development of an on-board structural health monitoring system for unmanned aerial vehicles wings based on integrated ultrasonic.

Janet E. Stout Research Associate Professor, Civil and Environmental Engineering, Ph.D., University of Pittsburgh, 1992 - Dr. Stout's major interest is in the environmental microbiology of Legionnaires' disease and Legionella pneumophila. Research in these areas includes the study of this and other waterborne bacterial pathogens in building water distribution systems. Specific study involves molecular typing techniques, biofilm formation, intracellular antimicrobial susceptibility testing and susceptibility to new disinfection methods.

Morteza A.M. Torkamani Associate Professor, Civil and Environmental Engineering, Ph.D., University of California, Los Angeles, 1975 - Dr. Torkamani has been active in the following research projects: application of the finite element method and component mode synthesis in response calculation of high rise buildings to wind and earthquake loadings; measurements and interpretation of full-scale building response during and after construction period; elastoplastic analysis of the plane stress and plain strain problems using a linear yield surface and mixed hardening rule; dynamic analysis of tied arch bridges; and simulation of wind flow patterns around bridge deck sections.

Luis E. Vallejo Professor, Civil and Environmental Engineering, Ph.D., University of Wisconsin-Madison, 1977 - Dr. Vallejo's research interests are in the areas of shear strength of soft soils (muds) and stiff clays, the mechanics of crack propagation and interaction in clays, the influence of cracks on the permeability of

135

clays, the liquefaction of sands, the mobilization mechanics of mudflows and debris flows, the freezing and thawing of soils, the stability of natural slopes, the evolution mechanics of coastal slopes, and the use of fractals in geotechnical engineering.

Julie M. Vandenbossche Research Assistant Professor, Civil and Environmental Engineering, Ph.D., University of Minnesota, 2003, Research interests include the characterization of the material properties and performance of portland cement concrete and transportation infrastructure systems with particular interests in the design, analysis and rehabilitation of concrete pavements, pavement instrumentation and pavement modeling.

Radisav D. Vidic William Kepler Whiteford Professor, Civil and Environmental Engineering, Ph.D., University of Cincinnati, 1992 - Dr. Vidic's research interests include physical chemical processes for water, wastewater, hazardous waste and air treatment, activated carbon applications in water and hazardous waste treatment and for the control of mercury emissions from power plants and incinerators, improving activated carbon performance by oxygen mediated polymerization of organic compounds, development and evaluation of novel activated carbon-based adsorbents for the control of mercury emissions in flue gases, novel disinfection technologies and sustainable water use.

Na Wei Assistant Professor, Civil and Environmental Engineering, Ph.D., University of Illionis, 2011.

The main theme of Dr. Wei's research is to understand and manipulate microbial communities at the molecular level for beneficial applications in environmental engineering like production of biofuels and value-added compounds from wastes or renewable sources by biotransformation, biotransformation and bioremediation of emerging environmental contaminants in natural or engineered systems, and biological/ecological effects of emerging contaminants. Metabolic engineering, synthetic biology and systems biology approaches, and emerging molecular biology techniques are applied to develop new insights into environmentally relevant biological processes and engineer microbial processes to provide novel solutions to sustainability challenges in water, energy and natural resources.

Qiang Yu Assistant Professor, Civil and Environmental Engineering, Ph.D., Northwestern University, 2007.

Dr. Yuâ&#x20AC;&#x2122;s research is focused on developing novel analysis and design methodologies with the aim of improving structural safety, reliability and sustainability. His research interests include: mechanical properties of concrete, composite materials, smart materials and hybrid structures; safety, reliability and life-long performance of critical structures; fracture characteristics of energy-efficient and crash-worthy materials; risk analysis of advanced structural materials under extreme conditions, and structural capabilities of bio-inspired materials and sustainable materials

Computer Engineering Yiran Chen Assistant Professor, Computer Engineering, Electrical and Computer Engineering, Ph.D., Purdue University 2005. Dr. Chenâ&#x20AC;&#x2122;s research interests include: Nano-electronic devices (Silicon and non-Silicon), Nano-scale reconfigurable computing systems and sensor systems, Emerging memory and sensing technologies, and Low- power circuit design and computer architecture.

Donald Chiarulli Professor, Computer Science, Computer Engineering. Dr. Chiarulli's current research falls into three areas; optoelectronic cache memory interface design, where the objective is to design, fabricate and test a

136

prototype cache memory which allows efficient digital data transfer between a three dimensional optical memory and a general purpose computing system, computer aided design of free space optoelectronic systems, where the goal is to produce a design and analysis prototyping tool for mixed technology free space optoelectronic information processing systems, and optically integrated super scalar processor design, where the aim is to provide a demonstration of the first optically integrated super scalar processor, which uses optical buses between the functional units, to execute programs with sub-instruction parallelism.

Bruce R. Childers Assistant Professor, Computer Science, Computer Engineering, Ph.D., Computer Science, University of Virginia, 2000. Dr. Childers’ research includes a novel system for the automatic design of applicationspecific processors, and custom VLIW/systolic architectures and low power embedded processors. His general research interests include computer architecture, compilers and software development tools, and embedded systems.

Steven P. Jacobs Assistant Professor, Electrical and Computer Engineering, Computer Engineering, D.Sc. Electrical Engineering, Washington University, 1996. Dr. Jacobs is primarily interested in undergraduate and graduate education. His research interests include model-based estimation of signal parameters.

Steven P. Levitan John A. Jurenko Professor of Computer Engineering, Ph.D., Computer Science, University of Massachusetts, 1984. Dr. Levitan’s research interests include the design, modeling, simulation, and verification of highly parallel systems, including sensing, computing, and communications functions. In particular, his work is focused on parallel and optical computer architectures, VLSI systems, and mixedtechnology microsystems. His recent work is on computer aided design tools and methodologies for mixedsignal multi-domain systems spanning software, digital and analog electronics, and optical MEMS. Hai (Helen) Li Assistant Professor, Electrical and Computer Engineering, Computer Engineering, PhD Electrical and Computer Engineering, Purdue University, 2004. Her research interests include architecture/circuit/device co-optimization for green computing systems, emerging memory design, neuromorphic hardware, and 3D integration technology and design.

Rami Melhem Professor, Computer Engineering, Computer Science, Ph.D., Computer Science, University of Pittsburgh, 1983. Dr. Melham’s research interests include: parallel and distributed high-performance computing, faulttolerant computing, multiprocessor interconnection networks, real-time systems and optical computing.

Marlin H. Mickle Nickolas A. DeCecco Professor, Computer Engineering, Electrical and Computer Engineering, Ph.D., University of Pittsburgh, 1967 - Dr. Mickle’s research areas include parallel computation, embedded computing, high-speed computation. Current emphasis is on computer networks, RF communication and sensor interfacing.

Daniel Mossé Professor and Chair of the Department of Computer Science, also Computer Engineering faculty, Ph.D. Computer Science, University of Maryland, 1993. Dr. Mosse's research interests include computer operating systems in general. The focus of the research is on green and real-time computing, including power management, wireless and sensor networks, and scheduling resource allocation in distributed realtime systems.

137

John C. Ramirez Senior Lecturer, Computer Engineering, Computer Science, Ph.D. Computer Science, University of Pittsburgh, 1995. Dr. Ramirez received his B.S. in Mathematics and Biochemistry from Duquesne University in 1986. He received his M.S. in Computer Science from the University of Pittsburgh in 1989, and completed his Ph.D., also in Computer Science from the University of Pittsburgh, in 1995. His dissertation is titled Flexible Fault-Tolerance Using Redundancy in Mesh Connected Processor Arrays. His research interests include parallel processing and fault-tolerance in parallel systems. Dr. Ramirez is also the Director of Undergraduate Studies in the Computer Science Department.

Jun Yang Associate Professor, Computer Engineering, Electrical and Computer Engineering, Ph.D., University of Arizona, 2002. Dr. Yang’s research interests include but are not limited to: microarchitecture, memory systems, emerging memory technologies, interconnection networks, low-power, thermal-aware computing; chip multiprocessors and 3D processor architectures.

Taieb Znati Professor, Computer Science, Computer Engineering, Ph.D., Computer Science, Michigan State University, 1988. Dr. Znati's current research interests focus on the design of network protocols for real-time communications to support multimedia environments, the design and analysis of medium access control protocols to support distributed real-time systems, and the investigation of fundamental design issues related to distributed applications. He teaches courses in networking, distributed operating systems and performance analysis.

Electrical and Computer Engineering Luis F. Chaparro Associate Professor, Electrical and Computer Engineering, Ph.D., University of California at Berkeley, 1980. Dr. Chaparro’s research interests include statistical signal processing, time-frequency analysis, nonlinear image processing and multidimensional system theory. Author of Signals and Systems using MATLAB, published by Elsevier in 2010.

Kevin P. Chen Associate Professor and Paul E. Lego Faculty Fellow, Electrical and Computer Engineering, Ph.D., University of Toronto, 2002. Dr. Chen’s current research interests focus on photonic components and application in communication and sensing, and 3-D nanofabrication using deep UV laser.

Yiran Chen Assistant Professor, Computer Engineering, Electrical and Computer Engineering, Ph.D., Purdue University 2005. Dr. Chen’s research interests include: Nano-electronic devices (Silicon and non-Silicon), Nano-scale reconfigurable computing systems and sensor systems, Emerging memory and sensing technologies, and Low-power circuit design and computer architecture.

Panos K. Chrysanthis Associate Professor, Computer Science and Electrical and Computer Engineering, Ph.D. (Computer and Information Sciences), University of Massachusetts at Amherst, 1991. Dr. Chrysanthis' research interests lie within the areas of database systems, distributed and mobile computing, operating systems and real-time systems.

138

Amro El-Jaroudi Associate Professor, Electrical and Computer Engineering, Ph.D., Northeastern University, 1988. Dr. EIJaroudiâ&#x20AC;&#x2122;s research areas focus on signal processing. Interests include speech processing, time-varying spectral analysis, signal processing applications.

Mahmoud El Nokali Associate Professor, Electrical and Computer Engineering, Ph.D., McGill University, 1980. Dr. El Nokali's current research interests focus on power electronics and semiconductor device modeling, with specialemphasis on short-channel MOSFET, high electron mobility transistor (HEMT), HBT and BiCMOS modeling.

Steven P. Jacobs Assistant Professor, Electrical and Computer Engineering, Computer Engineering, D.Sc. Electrical Engineering, Washington University, 1996. Dr. Jacobs is primarily interested in undergraduate and graduate education. His research interests include model-based estimation of signal parameters.

Alex K. Jones Associate Professor, Electrical and Computer Engineering, Ph.D., Northwestern University 2002. Dr. Jonesâ&#x20AC;&#x2122; interests focus on the area of electronic design automation. Specific interests include designing and compiling hardware descriptions from high-level languages, automated System-on-a-Chip design, hardware and software co-design methodologies, and hardware design automation for low-power.

Irvin R. Jones, Jr. Assistant Professor, Electrical and Computer Engineering, Ph.D. Computer Engineering, University of Colorado at Boulder, 1998. Prof. Jones is the EE Program Undergraduate Coordinator. His recent research has been in power systems and in systems engineering tools and also in intelligent systems, autonomous navigation and control.

Hong Koo Kim Professor Electrical and Computer Engineering Ph.D. (Electrical and Computer Engineering), Carnegie Mellon University 1989. Dr. Kim's research interests are in developing photonic, integrated optoelectronic, and microelectronic devices based on novel functional materials (mostly in micro or nanoscale thin-film form) such as erbium-doped oxides, wide bandgap semiconductors, ferroelectric films, and self-organized nanostructures. The scope of his research covers design, fabrication and characterization of materials and devices, and study of device physics. His current research includes development of photonic chips that show zero insertion-loss in transmission of optical signals, high-sensitivity UV detectors based on wide bandgap semiconductors,ferroelectric-based nonvolatile memories and guided-optic modulators, and ultracompact systems-on-a-chip (SoC) based on self-organized nanochannel arrays of logic devices, memories, sensors and transducers.

George L. Kusic (P.E.) Associate Professor, Electrical and Computer Engineering, Ph.D., Carnegie Mellon University, 1967. Dr. Kusic's research is in real time analog and digital control of power systems. He specializes in the application of integrated circuit designs for controlling large electromechanical machinery such as synchronous generators of earth-based utilities, as well as space power systems which share load between batteries, solar panels and solar dynamic machinery.

Steven P. Levitan John A. Jurenko Professor of Computer Engineering, Ph.D., Computer Science, University of Massachusetts, 1984. Dr. Levitanâ&#x20AC;&#x2122;s research interests include the design, modeling, simulation, and verification of highly parallel systems, including sensing, computing, and communications functions. In

139

particular, his work is focused on parallel and optical computer architectures, VLSI systems, and mixedtechnology microsystems. His recent work is on computer aided design tools and methodologies for mixedsignal multi-domain systems spanning software, digital and analog electronics, and optical MEMS. Ching-Chung Li Professor, Electrical and Computer Engineering, Ph.D., Northwestern University, 1961.

Dr. Li's current research is focused on applications of multiwavelet transforms, multiridgelets and curvelets to biomedical image processing and pattern recognition, super-resolution and multi-resolution image fusion, as well as secure transmission of confidential images.

Guangyong Li Assistant Professor, Electrical Engineering, PhD, Michigan State University (2006). Dr. Li’s current research interests include nanorobotics for deterministic fabrication of nanodevices; molecular recognition for nanorobotics-enabled patch-clamping; modeling, simulation, and characterization of nanostructured organic, inorganic, and hybrid solar cells.

Hai (Helen) Li Assistant Professor, Electrical and Computer Engineering, Computer Engineering, PhD Electrical and Computer Engineering, Purdue University, 2004. Her research interests include architecture/circuit/device co-optimization for green computing systems, emerging memory design, neuromorphic hardware, and 3D integration technology and design.

Zhi-Hong Mao Associate Professor and William Kepler Whiteford Faculty Fellow, Electrical and Computer Engineering, PhD Massachusetts Institute of Technology (2005). Dr. Mao’s areas of research include networked control systems and human-centered control systems.

Thomas E. McDermott (P.E.) Assistant Professor, Electrical and Computer Engineering, PhD Electrical Engineering, Virginia Polytechic Institute and State University, 1998. Dr. McDermott specializes in circuit simulation, electric power distribution systems, distributed wind and solar integration, lightning protection, power quality and power electronics applications.

Rami Melhem Professor, Computer Science and Electrical and Computer Engineering, Ph.D., University of Pittsburgh, 1983. Dr. Melhem's research includes parallel, fault-tolerant, real time and optical systems.

Marlin H. Mickle Professor, Electrical and Computer Engineering, Computer Engineering, Ph.D., University of Pittsburgh, 1967. Dr. Mickle’s research areas include parallel computation, embedded computing, and high-speed computation. Current emphasis is on computer networks, RF communication and sensor interfacing.

Kartik Mohanram Associate Professor of Electrical and Computer Engineering; Ph.D. in Computer Engineering, University of Texas, Austin, 2003. Dr. Mohanram received the B.Tech. degree in Electrical Engineering from IIT, Bombay in 1998, and the M.S. and Ph.D. degrees in Computer Engineering from the University of Texas, Austin in 2000 and 2003, respectively. His research interests span computer engineering and systems, nano-electronics, and computational biology. He is a recipient of the NSF CAREER Award, the ACM/SIGDA Technical Leadership Award, and the A. Richard Newton Graduate Scholarship.

140

Gregory F. Reed Associate Professor, Electrical and Computer Engineering and Director, Power and Energy Initiative, PhD, University of Pittsburgh, 1997. Dr. Reed’s research interests include power transmission and distribution and energy systems; smart grid technologies; power electronics and control technologies and applications; storage technologies; and power generation and renewable energy resources. He joined the Swanson School of Engineering faculty after 23 years of electric power industry experience.

Ervin Sejdić Assistant Professor, Electrical and Computer Engineering, PhD, The University of Western Ontario (2008).

Dr. Sejdić’s areas of research include biomedical and theoretical signal processing, assistive and medical devices, and modeling of age- and disease-related declines of swallowing, gait and cognitive functions.

William Stanchina Professor and Chairman, Electrical and Computer Engineering, PhD. University of Southern California (1978). Dr. Stanchina’s research interests include high-frequency compound semiconductor devices and integrated circuits, and optoelectronic and quantum devices, novel sensors, and fabrication technologies.

Mingui Sun Associate Professor, Neurological Surgery, Bioengineering and Electrical and Computer Engineering. Ph.D. Electrical Engineering, University of Pittsburgh, 1989. Dr. Sun’s research interests include neurophysiological signal and systems, biosensor design, brain-computer interface, bioelectronics, and bioinformatics.

Jun Yang Associate Professor, Computer Engineering, Electrical and Computer Engineering, Ph.D., University of Arizona, 2002. Dr. Yang’s research interests include but are not limited to: microarchitecture, memory systems, emerging memory technologies, interconnection networks, low-power, thermal-aware computing; chip multiprocessors and 3D processor architectures.

Minhee Yun Associate Professor, Electrical and Computer Engineering, Ph.D. Arizona State University (1998). Dr. Yun’s areas of interest include nano-structured materials such as nanowires and nanoparticles with an emphasis on biosensor applications, nanoscale low-dimensional materials including electrical phenomena and biocompatibility.

Industrial Engineering Mary Besterfield-Sacre Associate Professor in Industrial Engineering and Fulton C. Noss Faculty Fellow, Ph.D. (Industrial Engineering), University of Pittsburgh, 1996 – Dr. Besterfield-Sacre’s principal research interests are of engineering assessment to include engineering education, product realization and entrepreneurship. Dr. Sacre has worked on developing new methods to assess how students learn engineering. Dr. Sacre is the Director of the Engineering Education Research Center.

Bopaya Bidanda Professor and Ernest E. Roth Professor and Chairman in Industrial Engineering, Ph.D. (Industrial and Management Systems Engineering), Pennsylvania State University, 1987 - Dr. Bidanda's research focus includes Global Supply Networks, Computer Integrated Manufacturing Systems and the New Product

141

Development, Time Compression Technologies such as Rapid Prototyping, Reverse Engineering, and Rapid Manufacturing. He works closely with manufacturing industries in the area of re-engineering cellular manufacturing, work measurement, automatic data collection, shop floor information systems and, product development.

Karen M. Bursic Assistant Professor, Industrial Engineering, Ph.D. (Industrial Engineering), University of Pittsburgh, 1990 Dr. Bursic currently teaches courses in probability and statistics, engineering economics, engineering computing, and engineering management. Her research interests include improving engineering education, engineering economics, and project team management.

Youngjae Chun Assistant Professor in Industrial Engineering, Ph.D. (Mechanical Engineering), University of California, Los Angeles, 2009 – Dr. Chun’s primary research focus is on designing, manufacturing, and testing of medical devices to treat vascular diseases using smart materials through minimally invasive surgery. He also has an interest in the development of bio-hybrid composite biomaterials, implantable microsystems, and in-vitro experimental apparatus for developing more diverse biomedical applications with a focus on novel materials and manufacturing concepts.

David I. Cleland Professor Emeritus, Ph.D. (Management), Ohio State University, 1962 - Dr. Cleland has had extensive experience as a lecturer on Project Management and Strategic Management throughout the United States and in foreign countries. He has authored or edited over 34 books and has served as a management consultant, and as an expert witness on several major court cases. His primary research interests are in the field of project management, and strategic management.

Joel M. Haight Associate Professor of Industrial Engineering at the University of Pittsburgh, Ph.D. (Industrial and Systems Engineering), Auburn University, 1999. Dr. Haight is the director of the new safety engineering graduate certificate program and teaches human factors engineering, productivity analysis and graduate level courses in safety engineering. His principle research interests and activities are in human factors engineering and ergonomics associated with improving the design health care and industrial applications and process intervention effectiveness measures related to safety and loss prevention. He also develops optimization models to determine safety-related resource allocation in the oil and gas and mining industries. He will begin coordinating the professional master’s degree for the department.

Jeffrey P. Kharoufeh Associate Professor, Industrial Engineering, Ph.D. (Industrial Engineering and Operations Research), Pennsylvania State University, 2001 – Dr. Kharoufeh specializes in applied probability, stochastic processes and queueing theory. His application areas include reliability theory and maintenance optimization with a particular emphasis on energy and telecommunications systems.

Paul W. Leu Assistant Professor, Industrial Engineering, Ph.D. (Mechanical Engineering), Stanford University, 2008 – Dr. Leu’s research focuses on the computational and experimental characterization of advanced materials.

His primary areas of application include photovoltaics and superstrong materials. His methodological

142

interests are in electrodynamic simulations, combining optimization methods with physical simulations, and nanomaterial synthesis and characterization.

K. Louis Luangkesorn Research Assistant Professor, Industrial Engineering, Ph.D. (Industrial Engineering and Management Science), Northwestern University, 2004. Dr. Luangkesorn's research focuses on the use of simulation for making a choice between policy options. His primary areas of application are in emergency response and health care. He also works in supply chain and logistics. His methodological interests include ranking and selection, optimization via simulation, and experimental design.

Lisa M. Maillart Associate Professor, Industrial Engineering, Ph.D. (Industrial and Operations Engineering), University of Michigan, 2001 – Dr. Maillart’s research focuses on sequential decision making under uncertainty. Her primary areas of application include medical decision making and maintenance optimization. Her methodological interests include Markov decision processes (MDPs), in particular partially observed MDPs.

Mainak Mazumdar Professor Emeritus, Industrial Engineering, Ph.D. (Applied Statistics and Probability), Cornell University, 1966 – Dr. Mazumdar’s principal area of research is in the development of stochastic models for the evaluation of reliability and production costs of electric power systems. These models have much potential for application in the deregulated electric power industry. In collaboration with Professor J. Rajgopal he has also been developing the system-based component rest plans for evaluating the reliability of complex systems. This work requires amalgamation of ideas from statistics and probability theory as well as linear and nonlinear programming

Bryan A. Norman Associate Professor, Industrial Engineering, Ph.D. (Industrial and Operations Engineering), University of Michigan, 1995 - Dr. Norman's primary research interests include logistics and the application of operations research models to production and logistics systems in manufacturing, healthcare and public health settings. His research focuses primarily on three aspects of logistics. The first concerns the development of mathematical models for scheduling resources (e.g., machines and equipment) and personnel (e.g., equipment operators and medical staff) in both manufacturing and service organizations. Second, he investigates process design and redesign and methods for achieving efficient facility design and effective people, material, and information flows in a myriad of environments including manufacturing facilities and hospitals. Third, he models manufacturing, retail, healthcare, and vaccine supply chains to optimize their design and to enhance their operational effectiveness.

Oleg A. Prokopyev Associate Professor, Industrial Engineering, Ph.D. (Industrial and Systems Engineering), University of Florida, 2006 – Dr. Prokopyev’s primary research interests are currently focused in the areas of combinatorial optimization, integer programming, stochastic optimization, computational complexity, applications of operations research in healthcare, bioinformatics and defense. Dr. Prokopyev is a member of editorial boards of “Journal of Global Optimization” and journal “Optimization Letters.”

143

Jayant Rajgopal Professor, Industrial Engineering, Ph.D. (Industrial & Management Engineering), University of Iowa, 1985 - Dr. Rajgopal's primary focus area is operations research. His theoretical and methodological interests are mostly in deterministic and continuous optimization (especially geometric programming). His primary application areas of interest are (1) production and operations analysis (including such topics as supply chain design & analysis, logistics, inventory control, scheduling, and lean manufacturing), and (2) hospital, medical and healthcare delivery systems. He also has an interest in data mining and applied statistics.

Andrew J. Schaefer Professor, Industrial Engineering, Ph.D. (Industrial and Systems Engineering), Georgia Institute of Technology, 2000 - Dr. Schaefer's research interests include optimization under uncertainty and its applications to medical decision making, logistics, and network design. In particular, he has investigated the optimal timing of liver transplantation, the optimal treatment of AIDS and sepsis patients, supply chain management, and airline crew scheduling. His theoretical interests include integer programming, network flows, stochastic programming, Markov decision processes and simulation, with a particular focus on stochastic integer programming. Dr. Schaefer also has a secondary appointment in the School of Medicine.

M. Ravi Shankar Associate Professor in Industrial Engineering, Ph.D. (Industrial Engineering), Purdue University, 2006 – Dr. Shankar’s principal research interests are in the development of high-performance nanomaterials, elucidation of deformation behavior at the nanometer-scale and characterization of the mechanics of manufacturing processes. Dr. Shankar has secondary interests in the design and manufacture of multifunctional biomaterials.

Larry J. Shuman Professor, Industrial Engineering and Senior Associate Dean, School of Engineering, Ph.D. (Operations Research), The Johns Hopkins University, 1969 - Dr. Shuman's research interests include operations research with applications to improving engineering education and the planning of disaster response systems. Recent studies funded by the NSF have focused on the development of methodologies and models to assess engineering education outcomes, including the ability to predict student retention, first-term probation, and measure the level of moral problem solving. During the Spring 2002 term Dr. Shuman served as Academic Dean for the spring voyage of the Semester at Sea Program.

Natasa S. Vidic Assistant Professor, Industrial Engineering, PhD. (Industrial Engineering), University of Pittsburgh, 2008.

Dr. Vidic’s research focuses on applying operations research models to production, especially scheduling personnel in manufacturing as well as simulation modeling. Her research interests are also in the area of engineering education. She teaches undergraduate courses in probability and statistics, simulation modeling and engineering computing. She also teaches graduate statistics and data analysis.

Harvey Wolfe Professor Emeritus, Industrial Engineering, Ph.D. (Operations Research), The Johns Hopkins University, 1964 - Dr. Wolfe’s primary area of interest is operations research, with particular specialization in the services industries including health applications and the engineering education system. His primary interest is in measurement and assessment. He has been working on flow and evaluation models for the Undergraduate Engineering Education Process and is currently developing a work sampling approach to behavioral assessment; in particular, teamwork. He has previously been active in the development of simulation and control models for the evaluation and on-line control of hospital emergency rooms. As a secondary interest, he teaches and conducts research in engineering ethics and entrepreneurship for engineers.

144

Mechanical Engineering and Materials Science John A. Barnard Professor, Ph.D., Carnegie Mellon University, 1987 â&#x20AC;&#x201C; Dr. Barnardâ&#x20AC;&#x2122;s research interests include processing/structure/property (magnetic, electronic, mechanical) relations in thin films, materials for ultrahigh density data storage, nano-tribology, adhesion, phase transformations, surface/interface characterization, nanostructured and self-assembled materials, and hybrid (organic/inorganic) materials.

Sung Kwon Cho Associate Professor, Ph.D. in Mechanical Engineering, Seoul National University, Korea, 1998. Dr. Cho has been working on designing and fabricating micro-sensors/actuators using MEMS technologies for biomedical applications, such as droplet-based lab-on-a-chip using an electrical control of surface tension (electrowetting) and micro shear stress sensors to link real-time shear stress with cellular and molecular responses of endothelial cells. Currently, his research direction is to develop micro/nano devices that enable us to efficiently manipulate biomolecules (DNA and proteins), cells, functional particles and micro/nano fluids, and to investigate underlying scientific/engineering phenomena in these systems.

Minking K. Chyu Leighton and Mary Orr Chair Professor and Chairman, Ph.D. in Mechanical Engineering, University of Minnesota, 1986. Dr. Chyu's primary research area lies in thermal issues relating to power generation, propulsion and manufacturing systems. Major projects conducted to date include convective cooling of gas turbine airfoils, fuel cells, thermoelectric energy conversion, additive manufacturing and developments of thermal and fluid measurement techniques.

William M. Clark Professor, Ph.D. in Mechanical Engineering, Virginia Polytechnic Institute and State University, 1991. Dr. Clark's area of interest is in "smart structures", a field devoted to enabling structures and machines to interact with and adapt to their environments. Dr. Clark's current research projects are in morphing materials and systems for structural control, smart insulation for buildings, and inertial measurement of motion in sports and other applications.

Daniel G. Cole Daniel G. Cole is the Director of Nuclear Engineering and an Associate Professor in the Department of Mechanical Engineering and Materials Science and the Department of Bioengineering in the Swanson School of Engineering at the University of Pittsburgh. He received his B.S. (1991), M.S. (1992), and Ph.D. (1998) in Mechanical Engineering from Virginia Tech. His research interests are in the area of dynamic systems, measurement and control. His current research supervisory control of small modular nuclear reactors is studying control system architectures for managing plant operations, automating decision making, and the fault tolerance of such systems.

145

Markus Chmielus Assistant Professor, Mechanical Engineering and Materials Science, Ph.D. from the Technical University of Berlin, Germany, and postdoc at Cornell University from 2010-2013. Dr. Chmielus’s areas of research are the influence of production and processing parameters on the properties and microstructure of crystalline materials. Of particular interest are the production-microstructure-property relationships of metals produced via additive manufacturing (also known as 3D printing) especially Ti64 and Inconel718, as well as deposited ultra-high purity metal thin films. Another research area is the basic research and applications of smart materials like Ni-Mn-Ga magnetic shape-memory alloys. The focus is in general on the characterization of microstructure, defects, mechanical, electrical, magnetic and thermal properties on different length scales using local, national and international facilities.

Anthony J. DeArdo William Kepler Whiteford Professor, Materials Science and Engineering, Ph.D., Carnegie Mellon University, 1970 – Dr. DeArdo's research involves composition-processing-microstructure-property relations in structural materials, especially engineering alloys such as microalloyed steels, interstitial-free steels, dual-phase steels, and stainless steels. Of particular interest in his work are thermomechanical processing for microstructural control, texture development for improved formability, mechanical property optimization, the machineability of bar steels and ameliorating embrittlement in a variety of materials.

These programs involve the use of hot deformation machines, computer interfacing, a broad spectrum of metallographic techniques, and extensive mechanical testing. Professor DeArdo and his colleagues in the Basic Metal Processing Research Institute (BAMPRI) have received international acclaim for the discovery of “green steel” which will influence the course of machineable steel technology for years to come. They are also pioneering new electron metallographic techniques to better define the meso-scale and nano-scale microstructure of advanced high strength steels.

Giovanni P. Galdi Leighton E. and Mary N. Orr Professor, Mechanical Engineering and Mathematics, Laurea in Fisica, University of Naples, Italy, 1971. Dr. Galdi's areas of interest are theoretical fluid dynamics, with special regards to the Navier-Stokes equations and flow stability.

C. Isaac Garcia Research Professor, Materials Science and Engineering, Ph.D., University of Pittsburgh, 1982 - Dr. Garcia’s research interests and areas of expertise include Physical Metallurgy, Steels (HSLA, Microalloyed, Interstitial Free, TRIP, Dual-Phase, Complex-Phase, TWIP, Martensitic, Ferritic and Austenitic Stainless) and Superalloys; Thin Slab Casting processing and hot ductility performance of modern steels .

Development of high strength linepipe steels (plate, strip and seamless processing-products). Grain refinement of heavy section steels through Particle Stimulated Mechanisms (PSN). Microstructural optimization through alloy design and thermomechanical processing of engineering materials. Optimization of the recrystallization behavior through alloy design, TMP and grain boundary engineering of HSLA steels during continuous and/or batch annealing processes. Use of NDT/NDE systems to evaluate overall microstructure, temper embrittlement, and predict mechanical behavior performance. Alloy design and property optimization of components using Additive Manufacturing or 3D printing techniques for the power generation, oil and gas, automotive and medical industries. Machinability studies of engineering steels for automotive applications. Development of HSS rolls for the steel industry. Rapid solidification studies and development of amorphous metallic materials. Dr. Garcia is also Director of the Ferrous Physical Metallurgy Group. Dr. Garcia also directs the Undergraduate Ferrous Physical Metallurgy Research Program fully sponsored by 10 steel companies.

Peyman Givi James T. MacLeod Professor of Engineering, Ph.D. in Mechanical Engineering, Carnegie Mellon University, 1984. Dr. Givi’s areas of research interest include turbulence, combustion, thermal-fluids,

146

computational methods and stochastic processes. He is currently the Deputy Editor of AIAA Journal and a member of the editorial boards of Computers & Fluids, Journal of Applied Fluid Mechanics, and Open Aerospace Engineering Journal. He is also the Book Review Editor of AIAA Journal, an Associate Editor of Journal of Combustion, and a past advisory board member of Progress in Energy and Combustion Science. Professor Givi is Fellow of AIAA, APS and ASME. Brian Gleeson Chairman of the Mechanical Engineering and Materials Science Department and Harry S. Tack Chaired Professor of Materials Science. Dr. Gleeson received his Ph.D. from UCLA in 1989. His primary research focus is on the thermodynamics and kinetics of gas/solid and solid/solid reactions. Particular emphasis is on the high-temperature degradation of metallic alloys and coatings. Related to this, current research interests include: (a) active and passive high-temperature oxidation of alloys and coatings; (b) deposit-induced hot corrosion; (c) deposition and characterization of metallic coatings; (d) diffusion and thermodynamic treatments of both gas/solid and solid/solid interactions; and (e) structure/property relationships of materials. Dr. Gleeson serves as Editor-in-Chief of the international journal Oxidation of Metals.

Mark Kimber Assistant Professor, Mechanical Engineering, Ph.D. Purdue University. Received the B.S.M.E and M.S.M.E. degrees from Brigham Young University, Provo, UT in 2002 and 2004, respectively, and the Ph.D. degree in Mechanical Engineering in 2008 from Purdue University, West Lafayette, IN, where he conducted thermal and fluidic studies of piezoelectric fans for use as low-power heat transfer enhancement devices. He was the recipient of the Laura Winkelman Davidson Fellowship (2006-2007) and the Graduate Student of the Year Award in the School of Mechanical Engineering (2008). His current research interests as an Assistant Professor at the University of Pittsburgh include energy accountability and sustainability in electronic equipment, energy efficient and biomimetic methods of propulsion, and innovative heat transfer methods pertaining to nuclear power generation.

Jung-Kun Lee Associated Professor, Dr. Lee is a materials scientist and his major research topics include sophisticated processing and characterization of nanostructured materials and electronic materials for energy and environmental applications. Specific emphasis is placed on 1) photovoltaic application of wide band-gap nanoparticles, 2) surface plasmons for solar cells and photoelectrochemical cells, 3) material processing of electronic materials in forms of nanoparticles and thin films, 4) optical and magnetic properties of nanoparticles, and 5) the surface modification using ion implantation and chemical methods.

Scott X. Mao William Kepler Whiteford Professor, Ph.D. in mechanical behavior of materials, Tohuku University, 1988 Professor Mao's research interests are in the areas of nanomechanical behavior and deformation mechanism of materials, materials structure evolution under stress or deformation, materials science, nanomechanics, and in-situ transmission electron microscope.

Gerald H. Meier William Kepler Whiteford Professor in Materials Science and Engineering, Ph.D., Ohio State University, 1968 - His areas of research are high-temperature oxidation of metals and alloys, hot corrosion, environmental effects on the mechanical properties of alloys, and metallic and ceramic coatings. Much of his current research is focused on materials for advanced gas turbines and solid oxide fuel cells. Dr. Meier is the author of more than 170 publications and is the author of the book, Thermodynamics of Surfaces and Interfaces and co-author of the book, Introduction to the High Temperature Oxidation of Metals and Alloys.

His teaching areas include thermodynamics, transport phenomena, materials science, and gas-metal reactions.

147

Ian Nettleship Associate Professor, Materials Science and Engineering, Ph.D., Leeds University, UK, 1987 - Dr. Nettleship's research activities involve two areas of ceramic processing science. The first is microstructureproperty relationships for highly porous ceramics. At present he is particularly interested in the quantitative description of microstructure and how it affects the performance of these materials in biomedical applications including perfusion bioreactors for human cell culturing and tissue formation. His other area of research involves functionalization of both ceramic surfaces and porous ceramics with antibacterial nanoparticles to protect against mycobacteria biofilm formation and associated infections. Teaching interests include: ceramic materials, materials processing, thermal and mechanical properties of materials.

Anne M. Robertson Professor of Mechanical Engineering and Materials Science, Professor of Bioengineering, Research Faculty in the McGowan Center for Regenerative Medicine, Associate Director for Research Program in the Center for Medical Innovation (CMI). Ph.D. in Mechanical Engineering, University of California at Berkeley, 1992, President's Postdoctoral Fellow at the University of California at Berkeley, Department of Chemical Engineering 1992-1994. Dr. Robertson's research interests are (i) cerebral vascular disease (ii) constitutive modeling of soft biological tissues and (iii) Newtonian and non-Newtonian fluid dynamics.

Laura A. Schaefer Professor, Bicentennial Board of Visitors Faculty Fellow, Associate Director of Mascaro Center for Sustainable Innovation, Ph.D. in Mechanical Engineering, Georgia Institute of Technology, 2000. Dr. Schaefer's research areas of interest are improving the efficiency of energy conversion and utilization processes, multiscale thermofluid modeling, and societal and environmental impacts of energy systems.

David Schmidt David Schmidt received his Ph.D. in 2009 from Carnegie Mellon University. His dissertation developed computational-based methods tailored to soft tissue mechanics and tissue engineered cardiovascular systems. Prior to his doctoral studies, Dr. Schmidt held several positions in aerospace, defense and manufacturing industries. His early career concentrated on simulation technologies at ANSYS. Throughout his career, Dr. Schmidtâ&#x20AC;&#x2122;s primary interest has focused on the integration of engineering design, manufacturing and computational methods. His recent research experience has been in the areas of middle ear gas exchange mechanisms, multi-scale tissue biomechanics, robotic assisted surgery and trachea stenting devices based on an emerging class of biodegradable magnesium alloys. Other research areas include predictive modeling for near-net hot isostatic processing and material characterization for biodegradable alloys.

Nitin Sharma Assistant Professor, Mechanical Engineering, Ph.D from University of Florida. Dr. Sharmaâ&#x20AC;&#x2122;s areas of expertise is in robust control design of uncertain nonlinear systems. His current research projects include intelligent and robust control of neuromuscular electrical stimulation; control of functional electrical stimulation for walking and arm/hand function restoration; and modeling, optimization, and control of a hybrid walking system. He is a recipient of 2009 O. Hugo Schuck Award and Best Student Paper Award in Robotics at the 2009 ASME Dynamic Systems and Controls Conference. He was also a finalist for the Best Student Paper Award at the 2008 IEEE Multi-Conference on Systems and Control.

William S. Slaughter Associate Professor and Undergraduate Director, Ph.D. in Engineering Science, Harvard University, 1991.

Dr. Slaughter has varied interests in the area of theoretical solid mechanics. These include the development of models to characterize sintering processes of powdered materials, the study of enhanced strain-hardening associated with plastic deformation at very high strain gradients, fatigue and failure in bioprosthetic heart valves, and lifetime prediction models for power generation applications.

148

Patrick Smolinski Associate Professor, Ph.D. in Theoretical and Applied Mechanics, Northwestern University 1985. Dr. Smolinski's research interest is in computational and experimental methods for problems in biomechanics.

This includes the study of tissue properties, surgical procedures, injury mechanics and medical devices with particular emphasis on orthopaedic medicine.

Albert To Associate Professor, Mechanical Engineering and Materials Science, Ph.D from University of California, Berkeley, 2005 and postdoc at Northwestern University from 2005-2008. Dr. To’s areas of research include mechanics of 3D printed, bio-inspired, and nanoscale materials, multiscale mechanics theory and computational methods, nonequilibrium thermomechanical processes, multifunctional materials, wave propagation, dynamic fracture, inverse problems, and acoustic emission. His current research projects include several additive manufacturing projects and development of atomistic-continuum coupling method.

Jeffrey S. Vipperman Associate Professor, Director of Sound, Systems, and Structures Laboratory, Ph.D. in Mechanical Engineering, Duke University, 1997. Dr. Vipperman's research is in the area of active systems at the micro (MEMS) and macro scales. In his research, the various related fields of acoustics, structural acoustics, dynamics, vibrations, control theory, and analog and digital signal processing are unified in order to achieve specific goals such as active control of noise, vibration, and biologic systems or signal classification.

Guofeng Wang Assistant Professor, Materials Science Engineering, Ph.D Major in Materials Science and Minor in Computer Science from California Institute of Technology in 2002. Dr. Wang’s expertise is with developing multiscale simulation methods which range from electronic structure calculation, atomistic modeling, and finite element analysis, and further applying these simulation methods to design, characterize, and optimize a broad range of materials (such as, metals, semiconductors, polymers, and nanostructures). His current research projects include (a) searching novel electro-catalysts for polymer electrolyte membrane fuel cells, (b) simulating surface segregation phenomena in various alloy systems, (c) modeling mechanical deformation process in nanomaterials, (d) developing computational tools for advanced manufacturing, and (e) studying the structure/property relation of magnetic nanomaterials.

Qing-Ming Wang Professor and Graduate Director, Materials, Ph.D., Pennsylvania State University, 1998. Dr. Wang’s primary research interests are in microelectromechanical sensors and actuators; smart materials and structures; piezoelectric/electrostrictive ceramics, thin films, polymers, and composites for electromechanical transducers; bulk acoustic wave (BAW) devices and surface acoustic wave (SAW) devices; semiconductor materials and active nanocomposites; biosensors. His recent research on biosensors, nanomaterials and devices, sensors for harsh environments, and acoustic wave devices are funded by National Science Foundation (NSF), Army Research Office (ARO), DOE, and industries.

Jörg M. K. Wiezorek Professor, Mechanical Engineering and Materials Science, Ph.D. in Materials Science and Metallurgy, University of Cambridge, UK, 1994 - Professor Wiezorek's research expertise and interest center on the study of processing-structure-property relationships in advanced materials systems. Transmission electron microscopy (TEM) based imaging, quantitative diffraction and analytical spectroscopic methods, and other modern micro-characterization techniques feature prominently in his research. Combining the principles and practice of physical metallurgy and metal physics with electron microscopy observation and measurements with appropriate computer simulations the research leads to the discovery of novel materials and materials behaviors, explanations of the mechanical, magnetic and other physical properties of modern

149

materials, with an emphasis on intermetallic and metallic systems. Current research thrusts include: (1) Determination of the electronic structure of transition metals and intermetallics by quantitative electron diffraction and DFT; (2) Surface modification and grain-boundary-engineering for enhanced performance of structural materials for harsh environments; (3) Ultrafast (nano-scale spatio-temporal resolution) in-situ TEM pulsed laser induced transformations (e.g. rapid solidification) in metals and alloys; (4) Exploiting innovative manufacturing processes for the improved preparation of sustainable high performance permanent magnet materials.

Sylvanus Wosu Associate Professor, Associate Dean for Diversity Affairs, Ph.D. in Engineering Physics, University of Oklahoma, OK, 1988 with specialty in experimental nuclear medical physics. Professor Wosu’s current research interests are in the areas of impact physics and engineering of new advanced bio-inspired nano composite materials, nano-nuclear composite materials, and dynamic failure responses of composite materials. Other current research focus is the development of a new generation TaC/CNTs/SiC cermic matrix composites (CMCs) for high temperature applications. Dr. Wosu is nationally and internationally known for his work in penetration mechanics of composite materials. He established the dynamic impact and high speed imaging system at the University of Pittsburgh Department of Mechanical Engineering and Materials Science that is capable of simulating low and high strain rate penetration loading and capturing the dynamic event at 2 million frames per second. Special sample fixtures he developed are used to study perforation impact and single and multi-mode fracture tests and general characterization of materials failure. Professor Wosu is also interested in the experimental investigation of the dynamic failures and crack propagation of cylindrical composite storage tank with particular interests in the development of hydrogen storage tank, failure behaviors of hydrogen-diffused porous composite materials, and the containment of the associated hydrogen embrittlement. His other research interests include experimental nuclear medical physics, laser-based medical physics research in Cerebral Metabolic Pathways of Oxygen, petrophysics and petroleum fluid characterization of reservoirs. His engineering education and leadership research focuses on the Framework of Effective Diversity Programs in Higher Education. His most recent published work was on a “Model for Diversity and Equity: Diversity in Graduate Engineering Education” is the culmination of his over 20-year experience as an advocate for diversity and inclusion in higher education. His recent work in research and service areas include four books centered on a new paradigm on Leader as Servant Leadership Model.

Paolo Zunino Assistant Professor, Mechanical Engineering, Ph.D in Applied Mathematics at the Ecole Polytecnique Fédérale de Lausanne, 2002. Dr. Zunino’s expertise is focused in the development of mathematical models and numerical approximation methods with application to engineering and life sciences. His current research projects include: the study of nonstandard finite element schemes for flow, transport and fluidstructure interaction; the application of such methods to forward and inverse problem formulations; computational modeling of multiphase flow and transport problems through heterogeneous media; computational modeling of microcirculation; computational modeling of fluid dynamics and drug release in biomedical devices. He has received the SIAM Outstanding Paper Prize, awarded by the Society for Industrial and Applied Mathematics, on July 2004. The prize, first awarded in 1999, is given to outstanding papers published in SIAM journals during the three years prior to the year of the award. He has co-authored the monograph “A Primer on PDEs, Models, Methods, Simulations” published by Springer on 2013.

150

FACULTY RESEARCH INTERESTS Fiscal Year 2014 Active Sponsored Research

Chemical and Petroleum Engineering Anna Balazs Harnessing Light to Control the Autonomous Functionality of Soft Active Materials - National Science Foundation CDI-Type-1: Developing Computational Models to Enable the Experimental Self-Assembly of Modified Carbon Nanotubes into Biomimetic Synthetic Cellular Vesicles - National Science Foundation CDI-Type I: Developing Computational Models to Guide the Design of Chemomechanically Responsive, Reconfigurable Surfaces - National Science Foundation INSPIRE Track 1: Sensing and Computing with Oscillating Chemical Reactions - National Science Foundation Integrating Modeling and Experiments to Design Robust Self-Healing Materials - U.S. Department of Energy Inducing Artificial Morphogenesis in Soft Synthetic Materials - U.S. Department of Energy Polymer-Based Materials for Harvesting Solar Energy - University of Massachusetts CMSE NSF IRG II Collaboration - Massachusetts Institute of Technology Using Applied Force to Control the Properties of Reconfigurable Materials - U.S. Army Using Theory and Simulation to Design Active Materials with Sensory and Adaptive Capabilities - U.S. Air Force Bio-Inspired Adaptive High-Aspect-Ratio Nano-and Micro-Structures Powered By Responsive Hydrogels: Synthesis and Modeling - Harvard Medical School Novel Materials Approaches for Prevention of Marine Biofouling - U.S. Navy Four-Dimensional Printing: Design, Assembly, and Modeling of Responsive Temporally Programmable Materials - U.S. Army Ipsita Banerjee Defining Mechanisms Controlling Stem Cell Fate During Differentiation - National Institutes of Health Cheryl Bodnar Collaborative Research: Research Initiation Grants in Engineering Education: Development of Innovation Capacity in Engineering Students through Virtual Internships - National Science Foundation Robert Enick Quantifying Complex Fluid-Phase Properties at High Pressure/High Temperature - NETL/URS Development of High Molecular Weight PDMS - NETL/URS PDMS Characterization and Testing - NETL/URS Equation of State Model Assessment and Development - NETL/URS Evaluate Heavy Oil Viscosity Standard - NETL/URS Membrane Reactor Process for Conversion of Coal-Gas Components - NETL/URS CO2 Thickeners to Improve the Performance of CO2 Enhanced Oil Recovery and CO2 Fracturing - U.S. Department of Energy Task 332 Model Development - NETL/URS Small Molecule Associative CO2 Thickners for Improved Mobility Control - U.S. Department of Energy Experimentally Viscosity Data for Hydrocarbon Mixtures at HTHP Conditions - NETL/URS CO2 Mobility Control Support Using Cost Effective Brine-Soluble Surfactants - NETL/URS Di Gao CAREER: DNA Separation and Mutation Screening Based on the Elasticity of DNA Modules - National Science Foundation High-Efficiency Dye-Sensitized Solar Cells Based on Ordered TiO2 Nanotube Arrays - National Science Foundation REU Supplement: Condensation and Icing at superhydrophonic Surfaces - National Science Foundation REU Supplement: High Efficiency Dye-Sensitized Solar Cells Based on Ordered Ti02 Nanotube Arrays - National Science Foundation Multistage Separation of Cells using Hydophobic Interactions Enabled by Temperature-Responsive Polymers - National Science Foundation Rapid Tests for Chlamydia and Neglected Tropical Diseases - National Institutes of Health Biomimetic Self-Adhesive Dry EEG Electrodes - National Institutes of Health

151

J. Karl Johnson GOALI: Collaborative Research: Phase Behavior and Reactivity of a Hydroscopic System - National Science Foundation Computational Design of Metal Organic Frameworks for Photocatalytic Reduction of CO2 - U.S. Department of Energy Reactive Force Field Development - NETL/URS Neural Network Modeling - NETL/URS Lei Li

Understanding the Mechanics of Simultaneous Oleophobic/Hydrophilic Behavior: When a Nanometer-Thick Polymer Coating Meets an Attractive Solid Surface - National Science Foundation Understanding the Structure-Property Relationships of Comb-Like Polymer (CLP) Liquids with a Hydrocarbon Backbone and Fluorocarbon Side Chains - Seagate Technology LLC Tribological Modification of CVD-Grown Graphene with Nanometer-Thick Polymers - Taiho Kogyo Tribology Research Foundation Understanding the Interaction between Talc and Perfluropolyether (PFPE) Lubricants at the Head-Media Interface (HDI) - Western Digital Technologies, Inc. A study on Nanometer-Thick Comb-Like Polymers (CLPs) - Seagate Technology LLC Nanometer-thick High Temperature Lubricants for HAMR - International Disk Drive Equipment & Materials

Steven Little CDI Type-I: Developing Computational Models to Enable the Experimental Self-Assembly of Modified Carbon Nanotubes into Biomimetic Synthetic Cellular Vesicles - National Science Foundation Regeneration of Periodontal Structures through the Recruitment of Regulatory Lymphocytes - National Institutes of Health Treatment of Periodontitis via Recruitment of Regulatory Lymphocytes - National Institutes of Health Immunization Strategies for Autologous HIV Immunotherapy - National Institutes of Health Treatment of Periodontitis via Recruitment of Regulatory Lymphocytes - National Institutes of Health Regeneration of Periodontal Structures Through the Recruitment of Regulatory Lymphocytes - National Institutes of Health A New in Silico Design for Building Custom Controlled Release Systems - Qrono, Inc. Treatments for Periodontitis that Restore Immunological Homeostasis - Wallace H. Coulter Foundation Joseph McCarthy Fluids-Inspired Granular Processing: Novel Methods of Mixing and Separation - National Science Foundation REU Site: Enhancing Knowledge Integration Through Undergraduate Research - Particle-based Functional Materials for Energy, Sustainability, and Biomedicine - National Science Foundation An Integrated Education in the Engineering of Functional Materials - U.S. Department of Education Badie Morsi Development of Slurry Bubble Column Reactors for Fischer-Tropsch Synthesis - National Institute of Clean-and-Low Carbon Energy Sittichai Natesakhawat Fundamental Research Entitled Heterogeneous Catalysis of Photoactive Materials - NETL/URS Nitrogen Rich Porous Nanocarbon Materials - NETL/URS Design, Synthesis, and Characterization of Thermally Drive CO2 Conversion and Reactors - NETL/URS Robert Parker REU Site: Engineering Tools for Decision Support in Systems Medicine - National Science Foundation Engineering Personalized Cancer Chemotherapy Schedules - National Science Foundation Engineering Education Systems Medicine: Modeling , Analysis, Research, and Teaching - U.S. Department of Education Model-Based Decision Support for Tight Glucose Control without Hypoglycemia - National Institutes of Health Model-Based Decisions in Sepsis - National Institutes of Health Sachin Velankar Particles at Polymer Interfaces: Interfacial Phenomena and Morphology Control in Immiscible Polymer Blends - National Science Foundation EAGER: Thermoplastic Foams Stabilized with Interfacially-Active Particles - National Science Foundation Particles at Polymer/Polymer Interfaces: Interfacial Phenomena and Morphology Control in Immiscible Polymer Blends - National Science Foundation

152

EAGER: Thermoplastic Foams Stabilized with Interfacially-Active Particles - National Science Foundation Structure and flow in solid/fluid systems: Model studies using immiscible polymer blends - National Science Foundation Buckling of Bilayer Laminates: A Novel Approach to Synthetic Papillae - U.S. Air Force Buckling-induced morphological transformations in block copolymers - American Chemical Society Gรถtz Veser Chemical Looping Combustion: Syngas Production From Methane in a Periodically Operated Fixed-Bed Reactor - National Science Foundation Towards Assessing and Mitigating the Toxicity of Metal Nanoparticles - National Science Foundation ICMI Support for Oxygen Carrier Interaction Studies - NETL/URS Catalytic Processes for Conversion of Coal-Gas - NETL/URS Development of Catalysts for Coal-Gas Component Conversion - NETL/URS Catalytic Processes for Conversion of Coal-Gas - NETL/URS Development of Catalysts for Coal-Gas Component Conversion - NETL/URS Judith Yang Silicon Carbide Nanocone and Heterostructure Formations Catalyzed by the Release of Carbon-Encapsulated Metal Nanoparticles National Science Foundation Oxide Evolution Dynamics and Stability in Harsh Environments - National Science Foundation Synthesis, Characterization and Chemistry of Model Gamma Alumina Heterogeneous Catalysts - National Science Foundation Collaborative Research: In Situ Characterization of Methanol Oxidation Catalyzed by Copper-Based Materials - National Science Foundation The Reactivity and Structural Dynamics of Supported Metal Nanoclusters Using Electron Microsopy, In-situ X-ray Spectroscopy, Electronic Structure Theories, and Molecular Dynamics Simulations - University of Illinois

153

FACULTY RESEARCH INTERESTS

Fiscal Year 2014 Active Sponsored Research Civil and Environmental Engineering Jorge Abad Morphodynamics of Complex Meander Bends on Large Rivers - National Science Foundation Morphodynamics of the Madeira River: An Amazonian Anabranching Mega-River Facing Imminent Disruption - National Science Foundation Kyle Bibby EAGER: Engineering Microbial Mats for the On-Site Treatment of Wastewater from Unconventional Gas Production - National Science Foundation Water Resources Research Institute Annual Base Program FY 2013/2014 - Pennsylvania State University Laboratory and Field Evaluation of Microbes Associated with Shale Gas Production - NETL/URS Shift in The Microbial Ecology of Hospital Premise Plumbing Upon the Introduction of a Monochloramine Disinfection System - Alfred P. Sloan Foundation Melissa Bilec EFRI: Barriers, Understanding, Integration - Life Cycle Development (BUILD) - National Science Foundation Collaboration Research: Integrating Sustainability Grand Challenges and Systems Thinking into Engineering Curriculum - National Science Foundation Evaluating Sustainable Disposal Options for Compostable Biopolymers - Arizona State University CCLI Type I: Integrating Sustainability into the Civil Engineering Curriculum through Three Courses at the University of Pittsburgh - Arizona State University Energy Efficient Buildings Hub (EEB Hub) - Pennsylvania State University John Brigham Computational Methods for Optimized Reliability and Efficiency in Smart Structural Systems - National Science Foundation GRDS: Computational Methods for Optimized Reliability and Efficiency in Smart Structural Systems - National Science Foundation Fundamental Advances in Inverse Mechanics Towards Self-Aware and Intrinsically Adaptable Structural Systems - U.S. Air Force Experimentally Validated Numerical Models of Non-Isothermal Turbulent Mixing in High Temperature Reactors - UT-Battelle, LLC Andrew Bunger Formation of Rope-Like Hydraulic Fractures Along Joint/Fault Intersections - NETL/URS Impact of Mineral Cementation on Hydraulic Fracture Growth in Fractured and Faulted Reservoirs - Shell International Exploration and Production Kent Harries Structural Evaluation of Slab Rehabilitation by the Method of Hydrodemolition and Latex Modified Overlay - Commonwealth of Pennsylvania Strand Debonding for Pretensioned Girders - University of Cincinnati Anthony Iannacchione The Effects of Subsidence Resulting from Underground Bituminous Coal Mining on Surface Structures and Features and on Water Resources: Fourth Act 54 Five-Year Report - Commonwealth of Pennsylvania Develop Underground Mining Systems that Improve Coal Recovery while Reducing Environmental Impacts - Virginia Tech University Vikas Khanna Collaborative Research: Integrating Sustainability Grand Challenges and Systems Thinking into Engineering Curriculum - National Science Foundation Developing an Electricity-specific Mixed-unit Input-output Model for Life Cycle Assessment and Energy Policy Evaluation - National Science Foundation

154

Developing a Life Cycle Assessment Model for Evaluating Policy Implications of Biofuels - Arizona State University Fractionation and Catalytic Upgrading of Bio-Oil - University of Oklahoma Xu Liang EAGER: Collaborative Research: From Data to Users: A Prototype Open Modeling Framework - National Science Foundation Long-Term Solutions to Acid Producing Coal Mine Spoils using Industrial Waste - National Science Foundation EAGER: Collaborative Research: Network Interface and Data Collection Based on Compressed Sensing in Large-Scale Wireless Sensor Networking - National Science Foundation The Role of Vegetation, Surface, and Subsurface Processes on Mega Drought and Its Implications to Climate Change - U.S. Department of Energy The Role of Surface/Subsurface Processes and Large Scale Variations on Drought Prediction - National Oceanic & Atmospheric Administration Improving Pennsylvania Department of Transportation Hydrologic Disaster Forecasting and Response by Assimilating and Fusing NASA and other Data Sets - National Aeronautics & Space Administration Improving Hydrologic Disaster Forecasting and Response for Transporation by Assimilating and Fusing NASA and other Data Sets - U.S. Department of Transportation Jeen-Shang Lin Geomechanical Strength, Deformability and Seismic Properties of Hydrate Bearing Sediments and Numerical Analysis - Constitutive Model Development - NETL/URS Developing Constitutive Models of Various Hydrate-Bearing Sands - NETL/URS Piervincenzo Rizzo Hazard Mitigation of Water Mains by Means of Immersed Active/Passive Inspection Systems - National Science Foundation Collaborative Research: Highly Nonlinear Transducer Arrays for Structural Health Monitoring - National Science Foundation Indirect Bridge Health Monitoring by Means of Moving Vehicles - Carnegie Mellon University Phase II - Highly Nonlinear Solitary Waves for Rail Buckling Prevention - Federal Railroad Administration Corrosion Assessment of Tubular Steel Poles - University of South Carolina Julie Vandenbossche Development of Design Guide for Thin and Ultra-Thin Concrete Overlays of Existing Asphalt Pavements - Minnesota Department of Transportation Gas Flow Shallow Gas Formations - NETL/URS Evaluation of Bridge Cleaning Methods on Steel Structures - Commonwealth of Pennsylvania Improved Performance of Jointed Plain Concrete Through a Better Awareness of Drying Shrinkage - Commonwealth of Pennsylvania Experimental Design to Better Understand Gas Migration in Cement Paste Prior to and During Hydration - NETL/URS Guidelines for the use of Waste Concrete Fines - National Academy of Sciences Developing Recalibrated Concrete Performance Models for the DARWIN-ME Mechanistic-Empirical Pavement Design - National Academy of Sciences Development of an Improved Design Procedure for Unbonded Concrete Overlays - University of Minnesota Radisav Vidic Sustainable Management of Flowback Water during Hydraulic Fracturing of Marcellus Shale for Natural Gas Production - U.S. Department of Energy The Marcellus Shale Research Network - Pennsylvania State University Fate of Naturally Occurring Radioactive Material (NORM) in Flowback and Produced Waters from Shale Gas Development Sites NETL/URS Developing a Methodology to Incorporate Transit, Pedestrian and Bicycle Design Features into Highway and Bridge - Commonwealth of Pennsylvania Naturally Occurring Radioactive Material in Flow Back and Produced Water - NETL/URS Fate of Radium During Time-soda Ash Softening of Water Produced During Unconventional Gas Extraction - Shell International Exploration and Production Qiang Yu NRC Faculty Development: Swanson School of Engineering - U.S. Nuclear Regulatory Commission

155

FACULTY RESEARCH INTERESTS

Fiscal Year 2014 Active Sponsored Research Electrical and Computer Engineering Peng Chen Laser Manufacturing of Three-Dimensional Lightwave Circuits and Nano-Optical Devices - National Science Foundation EAGER: Fiber Sensors Networks for Crude Oil Migration Monitoring in Ocean - National Science Foundation Collaborative Research: Digitally Addressable and Scalable Laser Fabrication of 3 D Gradient Index Nanostructures and Nanophotonics Circuits - National Science Foundation EAGER: Feasibility Demonstration of Laser Manufacturing of Silicon Photonic Crystals for Solar Cells - National Science Foundation Adaptive Laser Shock Micro-Forming Processes - National Science Foundation Development of Metal Oxide Nanostructure-based Optical Sensors for Fossil Fuel Derived Gases Measurement at High Temperature - U.S. Department of Energy Ultrafast Fiber Laser Sampling and Plasma-Enhanced Laser Induced Breakdown Spectroscopy to Combat WMD - Defense Threat Reduction Agency Demonstration of High Temperature Compatible Optical Fiber Based on Distributed Chemical Sensing - NETL/URS Yiran Chen Design for Robustness: A New Design Philosophy for the Next-Generation Non-Volatile Memories - National Science Foundation Process-Variation Aware Memristor Modeling and Design - National Science Foundation SHF Small: Collaborative Research: STEMS: Statistic Emerging Memory - National Science Foundation CAREER: A Bio-inspired Ultra Low-Power Hybrid Embedded Computing Engine: Beyond One TeraFlops/Watt - National Science Foundation Memristor Crossbar Based Computing Engine for High Performance and Power Efficiency - State University of New York Memristor Crossbar Based Neuromorphic Hardware Systems - Hewlett Packard ECC designs for high-performance high-reliable MRAM - Samsung Electronics Co., Ltd. Amro El-Jaroudi Speaker Independent Continuous Density HMM Research - Vocollect Inc Robert Gaunt Reliable Spinal Nerve Interfaces for Sensorimotor Neuroprosthesis - U.S. Navy Alex Jones EFRI: Barriers, Understanding, Integrating - Life Cycle Development (BUILD) - National Science Foundation SHF: Medium: Compiler and Chip Multiprocessor Co-design for Scalable Efficient Data Access and Communication - National Science Foundation Hong-Koo Kim Single-Electron-Level Ballistic Transport Devices - National Science Foundation Electrical Pumping of Graphene by 2D Electron Gas Injection - U.S. Navy SAVD Prototype Development and Demonstration of Scalable Manufacturing - SAVD Solar, Inc. Steven Levitan Collaborative Research: Visual Cortex on Silicone - National Science Foundation INSPIRE Track 1: Sensing and Computing with Oscillating Chemical Reactions - National Science Foundation Unconventional Processing of Signals for Intelligent Data Exploition (UPSIDE) - HRL Laboratories, LLC Multi-Yield RFCM Investigations and Development - Dynetics Inc

156

Guangyong Li CPS-Small: Collaborative Research: Automated and Robust Nano-Assembly with Atomic Force Microscopes - National Science Foundation Development of Highly Sensitive and High-Resolution Kelvin Probe Microscopy for in situ Characterization of Organic Photovoltaic Cells National Science Foundation RET Supplement: Automated and Robust Nano-Assembly with Atomic Force Microscopes - National Science Foundation NUE: Flipping Learning Models to Illuminate Nanomanufacturing and Nanomaterials for Photovoltaics - National Science Foundation Hai Li CAREER STT-RAM Based Memory Hierarchy and Management in Embedded Systems - National Science Foundation SMURFS: Statistical Modeling, Simulation and Robust Design Techniquies for Memristors - National Science Foundation CSR: Small: Collaborative Research: Cross-Layer Design Techniques for Robustness of the Next-Generation Nonvolatile Memories National Science Foundation XPS: DSD: Collaborative Research: NeoNexus: The Next-generation Information Processing System Across Digital and Neuromorphic Computing Domains - National Science Foundation An Adaptive Information Processing System Resilient to Device Variations and Noises - Defense Advanced Research Projects Agency Zhi-Hong Mao CAREER: Evaluating Capabilities of Neural Control in Human-Machine Interaction - National Science Foundation CSR: Medium: Collaborative Research: Static Pipelining, an Approach for Ultra-Low Power Embedded Processors - National Science Foundation Wearable eButton for Evaluation of Energy Balance with Environmental Context and Behavior - National Institutes of Health Kartik Mohanram SHF: Small: Collaborative Research: Modeling, Simulation, and Design for Performance and Reliability in Carbon-based Electronics National Science Foundation SHF: Small: Lookahead Logic Circuits for Perfomance, Power, and Reliability - National Science Foundation John Pittner UCF Support - University of Central Florida Gregory Reed Keystone Smart Grid Fellowship Program - Lehigh University Fundamental Research Entitled: The Next Generation Power Converter: System Level Modeling - URS Corporation Nanocomposite Magnet Technology for High Frequency MW Scale Power Converters - Carnegie Mellon University National Offshore Wind Energy Grid Interconnection Study - ABB Inc. Interfaces of Electric Power and Energy Research Commercialization - Commonwealth of Pennsylvania 2 Design of Medium Voltage Direct Current (MVDC) Networks - ABB Inc. High Voltage Direct Current (HVDC) Technology Development Program. - Mitsubishi Electric Corporation Electric Power Distribution Modeling for Feeder Analytics and Distributed Energy Resource Integration - FirstEnergy Corp.

Ervin Sejdic The Aspirometer: A Noninvasive Tool to Detect Swallowing Safety and Efficiency - National Institutes of Health Remote Sensing for Bridge Scour Projects - Commonwealth of Pennsylvania Ortho-Tag Development and Sensor Electronics for pH - Phase II - Ortho-tag Inc. Passive Implantable Medical Devices - Innovation Works Testing Facility for GS1/Development of Cutting-edge Research Program in 3D Bar Codes - GS1 AISBL Jun Yang CAREER-EHS: Thermal-Aware Task Scheduling for Embedded Planar and 3D Chip Multiprocessors - National Science Foundation EAGER: Architecting Nanophotonic Interconnection Network Design for Reliability Improvement - National Science Foundation Minhee Yun Large Area Graphene Synthesis and Its Applications - University of Texas at Dallas

157

FACULTY RESEARCH INTERESTS

Fiscal Year 2014 Active Sponsored Research Industrial Engineering Mary Besterfield-Sacre Assessing the Spectrum of International Undergraduate Engineering Educational Experiences - National Science Foundation Bopaya Bidanda New Methods for Analysis of Eye-tracking Data for Medical Image Perception Research - National Institutes of Health Protocolized Goal-Directed Resuscitation of Septic Shock to Prevent AKI-Murugan - National Institutes of Health Observer Studies Involving Search: Modeling and Analysis - National Institutes of Health Readmissions or Project - U.S. Department of Veterans Affairs Meat Processing Feasibility Study - Commonwealth of Pennsylvania Young Jae Chun A Novel Ultra-Low Profile Wireless Flow Monitoring Coil to Access Hemodynamic Quiescence within Intracranial Aneurysms - American Heart Association Frank Giarratani Industry Studies Transition - Alfred P. Sloan Foundation Industry Studies IIIA and IIIB--Secretariat and Services - Alfred P. Sloan Foundation Jeffrey Kharoufeh Adaptive Maintenance Planning Based on Evolving Residual Life Distributions - National Science Foundation Effective Management of Operating and Maintenance Activities for Wind Turbines - National Science Foundation Analysis and Optimization of Telephone Systems at VA Pittsburgh Health Systems - U.S. Department of Veterans Affairs Comparative Study of Lung Cancer Risk Models and Impacts on the VHA Screening Process - U.S. Department of Veterans Affairs Paul Leu Nanosphere Coatings on Silicon Thin Film Photovoltaics - National Science Foundation NUE: Flipping Learning Models to Illuminate Nanomanufacturing and Nanomates for Photovoltaics - National Science Foundation EAGER: Feasibility Demonstration of Laser Manufacturing of Silicon Photonic Crystals for Solar Cells - National Science Foundation Lisa Maillart Optimizing Implanted Cardiac Device Follow-Up Care - National Science Foundation Markov Decision Process Models for Optimizing Vaccine Administration - National Science Foundation Ravi Shankar Measuring Thermomechanical Material Response During Micromachining by In Situ Scanning Election Microscopy - National Science Foundation Deformation Mechanics and Microstructure Evolution During Microforming of Metals - National Science Foundation Markov Decision Process Models for Optimizing Vaccine Administration - National Science Foundation Bryan Norman Development of Staffing, Cost, and Inventory Models for Endoscope Reprocessing and Prosthetics - U.S. Department of Veterans Affairs Development of Staffing Methodologies and Tools for Sterile Processing Services - U.S. Department of Veterans Affairs HERMES Graphical User Interface Development and India Work - Bill and Melinda Gates Foundation HERMES Graphical User Interface Development and India Analysis - Johns Hopkins University

158

Oleg Prokopyev New Theory and Methods in Stochastic Mixed Integer Programming - U.S. Air Force CEMOR: Computing Equipment for Military Operations Research at the University of Pittsburgh - U.S. Air Force Jay Rajgopal Prosthetics Supply Optimization - U.S. Department of Veterans Affairs Dennis Saure Repetitive Combinatorial Optimization with Learning - National Science Foundation Andrew Schaefer The Optimal Timing of Kidney Exchanges: A Markov Game Approach - National Science Foundation Surgical Suite Modeling and Optimal Surgery Rescheduling - U.S. Department of Veterans Affairs Quantifying the Economic impact of suboptimal Breastfeeding - Cambridge Health Alliance Larry Shuman University of Pittsburgh Undergraduate Scholarship Proposal - National Science Foundation FIPSE CAPES Project: Sustainable Energy and Aeronautical Engineering Program - Florida State University University of Pittsburgh Undergraduate Scholarship Proposal to the Nuclear Regulatory Commission - U.S. Nuclear Regulatory Commission Juan Pablo Vielma Centeno Collaborative Research: Fundamentals of Convex Mixed Integer Nonlinear Programming - National Science Foundation

159

FACULTY RESEARCH INTERESTS

Fiscal Year 2014 Active Sponsored Research Mechanical Engineering and Materials Science Sung Kwon Cho Swimming Medbot in Human Body Propelled by Oscilliating Bubbles - National Science Foundation Collaborative Research: Development of Near-Field Thermophotovoltaic Energy Conversion Device - National Science Foundation Minking Chyu Trailing Edge Cooling (Turbine Thermal Management Field Work) - NETL/URS Internal and Transpiration Cooling (Turbine Thermal Management Field Work Proposal) - NETL/URS Thermoelectric-Driven Sustainable Sensing and Actuation Systems for Fault-Tolerant Nuclear Incidents, SMR-2 - Suny Upstate Medical University Trailing Edge Cooling - NETL/URS Internal and Transpiration Cooling - NETL/URS Daniel Cole Dynamic Maskless Holographic Lithography - National Science Foundation Course Development to Support Masters of Science Degree Program in Nuclear Engineering - U.S. Nuclear Regulatory Commission Utilization of NRC Nuclear Regulatory Research Computer Codes in Research and Course Development - U.S. Nuclear Regulatory Commission Nuclear Energy University Programs - General Scientific Infrastructure - U.S. Department of Energy Advanced I&C for Automated Decison Making in Nuclear Power Plants - UT-Battelle, LLC Advanced I&C for Fault-Tolerant Supervisory Control of Small Modular Reactors - U.S. Department of Energy Larry Foulke Fellowship and Scholarship Support - University of Pittsburgh - U.S. Department of Energy Paolo Galdi Mathematical Analysis of Some Fundamental Problems in Solid-Liquid Interaction - National Science Foundation Analytical and Numerical Study of Two Problems Arising in Solid-Liquid Interaction - National Science Foundation Peyman Givi Data Management and Visualization in Petascale Turbulent Combustion Simulation - National Science Foundation Center for Hypersonic Combined Cycle Flow Physics - University of Virginia LES of Sandia Half-Scaled Dump Combustor - NETL/URS Quantum Speedup for Turbulent Combustion Simulations - U.S. Air Force Brian Gleeson Oxide Evolution Dynamics and Stability in Harsh Environments - National Science Foundation Controlling Protective Scale Formation Development of Novel Pt-Free y-Ni+y-NIAl-Based Coatings by Optimizing Minor-Element Effects U.S. Navy University Management Support of Regional University Alliance - NETL/URS Degradation of TBC Systems in Environments Relevant to Advanced Gas Tubines for IGCC Systems - U.S. Department of Energy Oxidation Analyses and Structure-Function Predictions of A1xNiyFe1-x-y Alloys - NETL/URS Bond Coat and Extreme Temperature Coatings - NETL/URS Diffusion Barrier Coatings (Turbine Thermal Management Field Work Proposal) - NETL/URS Characterization and Performance Evaluation of AID Bond Coat Materials - NETL/URS Advanced Deposition Capability for Oxidation & Corrosion Protection Coatings - Directed Vapor Technologies International, Inc.

160

Mark Kimber Utilization of NRC Nuclear Regulatory Research Computer Codes in Research and Course Development - U.S. Nuclear Regulatory Commission Experimentally Validated Numerical Models of Non-Isothermal Turbulent Mixing in High Temperature Reactors - UT-Battelle, LLC Jung-Kun Lee Electron Injection in Nanostructured Materials: New Paradigm of Transparent Conducting Oxides - National Science Foundation Solid State Dye Sensitized Solar Cells Using Tunable Surface Plasmons of Core-Shell Particles - National Science Foundation NUE: Flipping Learning Models to Illuminate Nanomanufacturing and Nanomaterials for Photovoltaics - National Science Foundation Seedless Growth of Nanowires and Selective Positioning of Quantum Dots for Flexible and Panchromatic Photoelectrochemical Cells National Science Foundation Utilization of NRC Nuclear Regulatory Research Computer Codes in Research and Course Development - U.S. Nuclear Regulatory Commission Study on the Performance and High-Temperature Stability of Electrode Materials for Akali Meta Thermal-to-Electric Conversion Devices Korean Institute of Energy Research (KIER) Scott Mao Intergerated Nano-Mechanic Experiment and Atomistic Simulation on Moisture-Induced Interfacial Embrittlement - National Science Foundation Nanoscale Characterization of Nanostructured Thin Film with Ultrahigh Strength and Ductility - National Science Foundation Gerald Meier Investigation of the Transitions between Deposit-Induced Degradation Regimes and the Influence of Alloying Elements in Coatings and Structural Alloys - U.S. Navy Effect of Surface Reactivity of H2O and CO2 Molecules on the Durability of High Temperature Materials - U.S. Navy Oxy-Combustion Environment Characterization-Fireside Corrosion - NETL/URS Conduct and Analyze Short-Term Laboratory Fireside Corrosion Tests - NETL/URS Mark Miller The Effects of Platelet Rich Plasma on Cartilage with in Vitro Loading - Allegheny General Hospital Ian Nettleship Manufacturing the Microstructural Niche for Liver Bioreactors - National Science Foundation Innovative In Vivo-Like Model for Vascular Tissue Engineering - National Institutes of Health Anne Robertson The Link between Hemodynamics and Wall Structure in Cerebral Aneurysms - National Institutes of Health Laura Schaefer EFRI: Barriers, Understanding, Integrating - Life Cycle Development (BUILD) - National Science Foundation Gaining a Deeper Understanding of Small-Scale Phenomenon in Heat Pipes - National Science Foundation Patrick Smolinski Video Anatomy: Visualization of the ACL During Knee Function - Pittsburgh Foundation Albert To A New Atomistic to Continuum Thermomechanical Model that Enables a Novel Averaging Method for Molecular Dynamics Solution National Science Foundation Adaptive Laser Shock Micro-Forming Process and Metrology - National Science Foundation NRC Faculty Development: Swanson School of Engineering - U.S. Nuclear Regulatory Commission

161

Jeffrey Vipperman Finite Element Modeling of Blast-Induced Traumatic Brain Injury - National Science Foundation REU Supplement: Finite Element Modeling of Blast-Induced Traumatic Brain Injury - National Science Foundation Noise Classifier Support for Improved Military Noise Monitoring - U.S. Army Industrial Muffler Modeling and Testing - Miratech Holdings, LLC Qing-Ming Wang Collaborative Research: High Temperature Acoustic Wave Sensor Based on the Oxyborate Crystals - National Science Foundation High Temperature Acoustic Wave Sensors Based on Oxyborate Crystals - National Science Foundation Guofeng Wang SISGR: Theoretically Relating the Surface Composition of Pt Alloys to Their Performance as the Electrocatalysts of Low-Temperature Fuel Cells - U.S. Department of Energy Nanosegregated Cathode Catalysts with Ultra-Low Platinum Content - University of Chicago Argonne Lisa Weiland CAREER: High Performance, Mechanically Robust Ionomeric Sensors - National Science Foundation Conference Supplement - CAREER: High Performance, Mechanically Robust Ionomeric Sensors - National Science Foundation Jorg Wiezorek Electron Microscopy of Pulsed Laser Induced Rapid Solidification and Transient Solid State Phenomena in Nano-Scale Metal and Alloy Thin Films - National Science Foundation Electron Density Determination, bonding and Properties of Tetragonal Ferromagnetic Intermetallics - U.S. Department of Energy NRC Graduate Fellowship Program, Swanson School of Engineering, University of Pittsburgh - U.S. Nuclear Regulatory Commission Judith Yang The Reactivity and Structural Dynamics of Supported Metal Nanoclusters Using Electron Microsopy, In-situ X-ray Spectroscopy, Electronic Structure Theories, and Molecular Dynamics Simulations - University of Illinois Multiscale Atomistic Simulation of Metal-Oxygen Surface Interactions: Methodological Development, Theoretical Investigation, and Correlation with Experiment - U.S. Department of Energy

162

FACULTY RESEARCH INTERESTS Fiscal Year 2014 Active Sponsored Research Bioengineering Steven Abramowitch Macrophage Phenotype as a Determinant of Outcome in Pelvic Organ Prolapse Repair - National Institutes of Health Effects of Bazefoxifen/Conjugated Estrogens Complex on the Biomechanical Properties of the Pelvic-Floor and Pelvic Supportive Connective Tissue Remodeling - Pfizer, Inc. Stephen Badylak Engineering a Functional Liver Graft for Treatment of End Stage Liver Disease - National Institutes of Health Use of Autologous Inductive Biologic Scaffold Materials for the Treatment of Compartment Syndrome - Wake Forest University Regenerative Medicine Approach for Digit Reconstruction - Pittsburgh Tissue Engineering Initiative Development and Evaluation of Xenografts for Soft Tissue Reconstruction - C R Bard Inc. Development and/or Refinement of In Vitro Methods which would Characterize and/or Predict the Host Response to a Test Article - C R Bard Inc. Development/Refinement of Preclinical Models and Ex-Vivo Test Methods - C R Bard Inc. Aaron Batista Differential Contributions of Frontal Lobe Area to Eye/Hand Coordination - National Institutes of Health Differential Contributions of Frontal Lobe Areas - National Institutes of Health Collaborative Research: Dissecting Brain-Computer Interfaces: A Manifold and Feed-Back Control Approach - Carnegie Mellon University A Self-Calibrating Brain-Computer Interface - Carnegie Mellon University Michael Bonninger Revolutionizing Prosthetics Program, Phase 3 - Johns Hopkins University Harvey Borovetz, Prashant Kumta, Mark Redfern, Savio Woo, Charles Sfeir & William Wagner NSF Engineering Research Center for Revolutionizing Metallic Biomaterials - University of North Carolina Harvey Borovetz & David Brienza Rehabilitation Engineering Research Center on Telerehabilitation - U.S. Department of Education Harvey Borovetz & Andrew Schwartz Cortical Control of a Dextrous Prosthetic Hand - National Institutes of Health Harvey Borovetz & Robert Hendricks Interdisciplinary Visual Sciences (IVS) Training Program - National Institutes of Health Harvey Borovetz & Howard Aizenstein Pharmacologic MRI Predictors of Treatment Response in Late-Life Depression - National Institutes of Health Harvey Borovetz & Angus Thomson Interdisciplinary Training in Transplantation Biology - National Institutes of Health Harvey Borovetz & Amini Rouzbeh Alteration in the Mitral Valve Stress and Mitral Valve Interstitial Cell Deformation Following Repair Surgeries - National Institutes of Health Harvey Borovetz & Kang Kim Ultrasound-induced Thermal Strain Imaging for Arterial Plaque Characterization - National Institutes of Health

163

Harvey Borovetz & Joel Schuman Novel Glaucoma Diagnostics for Structure & Function - National Institutes of Health Harvey Borovetz & Kyong Bae Identifying CT Imaging Biomarkers Associated with Prognosis of Pulmonary Embolism - National Institutes of Health Harvey Borovetz & Karl Kandler Training in Auditory and Vestibular Neuroscience - National Institutes of Health Harvey Borovetz & Huicong Wang Repair of Tendinopathic Tendons - National Institutes of Health Harvey Borovetz & Joseph Samosky Game Based and Sensor Enhanced Medical Simulation and Training - Carnegie Mellon University Harvey Borovetz & Alan Wells All Human Microphysical Model of Metastasis Therapy - Massachusetts Institute of Technology Harvey Borovetz & Arthur Levine Health Research Formula Fund Award - Commonwealth of Pennsylvania Rake Cham Pittsburgh Older American Independence Center RC-2 Cham - National Institutes of Health Effects of Visual Fields on Standing Balance - National Institutes of Health Obesity and Body Segment Parameters in Working Adults - Centers for Disease Control & Prevention Reaching, Posture, Object Exploration, and Language in High and low-Risk Infants - National Institutes of Health April Chambers Impact Force Reduction - Biosport Athletechs, LLC Xinyan Tracy Cui Career: Manipulating Stem Cells via Electroactive Conducting Polymers - National Science Foundation Improving Chronic Neural Recording Performance through Biomaterial Strategies - National Institutes of Health Phase II - Design of Novel Brain-like Materials for Neural Interfacing - TDA Research, Inc. Reliable Spinal Nerve Interfaces for Sensorimotor Neuroprostheses - U.S. Navy Reliable Cortical Interfaces - U.S. Navy Soft and Elastomeric Intramuscular Electrode with Therapeutic Delivery Capability - TDA Research, Inc. Neural Probe for High Spatial and Temporal Resolution Detection of Cocaine and GABA - Diagnostic Biochips, Inc. Lance Davidson CAREER: Physical Shaping of Multicellular Mesenchymal Tissues - National Science Foundation Long Term Spatiotemporal Control to Investigate Dynamics in Xenopus Laevis Embryonic Development - National Science Foundation Biophysics of Development Buffering: Temperature as a Tool to Study How the Cytoskeleton Coordinates - National Institutes of Health The Biomechanics of Morphogenesis in the Frog - National Institutes of Health William Federspiel Paracorporeal Ambulatory Assist Lung - National Institutes of Health Testing of the HemoLung Respiratory Assist Device in the Adult and Juvenile Ovine Model 7-day study - Alung Technology

Robert Gaunt Reliable Spinal Nerve Interfaces for Sensorimotor Neuroprostheses - U.S. Navy

164

Robert Hartman Mechanobiology in CAM: Differential Effects of Amplitude - National Institutes of Health Theodore Huppert Characterization of Brain Noise Using Multimodal Mutual Information - National Institutes of Health Ibrahim Tamer Subject-Insensitvie and SNR Enhancing RF Arrays for High Field Parallel Human MRI - National Institutes of Health Hiroshi Ishikawa Mechanisms of Retinal Neurodegeneration and Visual Pathway axonal Loss in MS - New York University School of Medicine Mariann Kameneva Multi Scale Model of Thrombosis in Artificial Circulation - Carnegie Mellon University Prashant Kumta Nanoscale Heterostructures and Thermoplastic Resin Binders: Novel Li-Ion Anode Systems - University of California Mg Battery Development - NETL/URS Scott Lephart Naval Special Warfare Tactical Athlete Program Human Performance and Injury Prevention Research Initiative - U.S. Navy Patrick Loughlin Subject-Specific Vibrotactile Feedback Strategy for Augmenting Postural Control in Older Adults - National Institutes of Health Sonar Signal Processing and Feature Extraction for Automatic Target Recognition in Clutter - U.S. Navy Evaluation of Vibrotactile Balance Prosthesis in Patients with Vestibular Impairment - Pennsylvania Lions Hearing Research Foundation Pamella Moalli Comprehensive Evaluation of Prolapse Meshes by an Interdisciplinary Research Team - Magee-Womens Research Institute & Foundation Martin Oudega Development of a Laminin-Based, a Cellular, Injectable Matrix for Spinal Cord Repair - Wings for Life Spinal Cord Research Foundation Mark Redfern RI:Medium:Collaborative Research: Trajectory Libraries for Locomotion on Rough Terrain - National Science Foundation Modeling Shoe-Floor Interface Properties to Predict Slips and Falls - Centers for Disease Control & Prevention Partha Roy Profilin as a Target to Suppress Invasive Breast Cancer - National Institutes of Health Spatial Segregation of Cell Functioning during Cell Motility - National Institutes of Health Peter Rubin Autologous Adipose Derived Stem Cell Therapy for Soft Tissue Reconstruction After Facial Trauma - Rubin GSR Sub - Wake Forest University Autologous Fat Grafting for Treating Pain at Amputation Sites: A Prospective Randomized Trial - GSR SUB - U.S. Army Joseph Samosky Demonstration of a Modular Toolkit of Sensors and Augmented Reality Displays for On-Demand Medical Training with Objective Performance Assessment: The "RapidSeq" System of Rapid Sequence Induction Training - Carnegie Mellon University

165

Andrew Schwartz Cortical Control of a Dextrous Prosthetic Hand - National Institutes of Health Reliable Cortical Interfaces - U.S. Navy Revolutionizing Prosthetics Program, Phase 3 - Johns Hopkins University Sanjeev Shroff Cardiovascular Bioengineering Training Program - National Institutes of Health Interdisciplinary Training in Transplantation Biology - National Institutes of Health Carbon Nanotube Biodegradation by Neutrophil Myeloperoxidase - Centers for Disease Control & Prevention Hemostasis and Vascular Biology Research Institute - Hemophilia Center The Translational Research Partnership Program in Biomedical Engineering - Wallace H. Coulter Foundation Matthew Smith Influence of Attention and Eye Movement Signals on Population Coding in Area V4 - National Institutes of Health Dynamic Mechanisms of Active Vision in Prefrontal Cortex - National Institutes of Health George Stetten Microsurgical In-Situ Image Guidance with Optical Coherence Tomography - National Institutes of Health

Gelsy Torres-Ovieda BRIGE: Understanding the Generalization of treadmill-Assisted Motor Learning for the Rehabilitation of Gait after Stroke - National Science Foundation Rocky Tuan Enhanced Tendon Healing through Growth Factor and Cell Therapies - Washington University in St. Louis The Application of Adult Stem Cells and Native Tissue Matrices for Tissue Regeneration - Commonwealth of Pennsylvania David Vorp ROS Mechanisms in BAV Aortopathy - National Institutes of Health Autologous Stem Cell-Based Tissue Engineered Vascular Grafts - National Institutes of Health Biomedical Simulation of Evolving Aortic Aneurysms for Designing Intevention - Yale University Identification of an Ideal Cell Source Based on Type and Donor for Stem Cell Based-Tissue Engineered Vascular Grafts - American Heart Association William Wagner Biodegradeable, Thermoresponsive Hydrogels to Treat Ischemic Cardiomyopathy - National Institutes of Health Yadong Wang Design and Application of Biocompatible Polycations - National Science Foundation Biomimetic Design of Peripheral Nerve Guides - National Science Foundation Biodegradable Synthetic Vascular Graft - National Institutes of Health Biomimetic Coacervate Delivery of Muscle Stem Cell to Improve Cardiac Repair - National Institutes of Health The Use of Coacervate Technology as a New Drug Delivery System for Musculoskeletal Tissue Repair - National Institutes of Health Bone Abnormalities & Healing Defect in Muscular Dystrophy - National Institutes of Health Biomimetic Coacervates for Cardiac Repair and Regeneration - American Heart Association Direct transformation of Cell-free Synthetic vascular Grafts into arteries In situ - American Heart Association Douglas Weber Multichannel Microstimulation of Primary Afferent Neurons to Restore Proprioceptive Feedback - National Institutes of Health Douglas Weber IPA - Defense Advanced Research Projects Agency Savio Woo Training in Biomechanics in Regenerative Medicine - National Institutes of Health

166

Research Expenditures Fiscal Year 2014

Department Bioengineering

Federal Government

State & Local Government

Private/ Non-Profit Organizations

Business & Industry

$7,632,435

$13,250

$944,524

$66,578

8,656,787

175,016

160,364

6,153,292

-

Total

Chemical

5,817,912

Civil & Environmental

1,972,175

812,206

205,823

166,818

3,157,022

Electrical & Computer

3,017,539

136,152

29,755

490,765

3,674,211

Industrial

1,715,589

39,543

230,344

1,985,476

MEMS

4,596,365

81,208

4,677,573

(995,476)

Dean's Office Total

(995,476)

$23,756,539

$1,001,151

$1,666,670

$884,525

$27,308,885

Research Related

$16,425,611

Research Other

$47,303,412

Total Expenditures

$91,037,908

4%

6%

3%

87%

Federal Government State & Local Governments Private/Non-Profit Organization Business & Industry

167

Faculty Publications Department of Bioengineering Aghayev, A., Furlan, A., Patil, A., Park, B., & Bae, K. (2013). The rate of resolution of clot burden measured by pulmonary CT angiography in patients with acute pulmonary embolism.

American Journal of Roentgenology, 200(4), 791-7.

Ahlden, M., Samuelsson, K., Musahl, V., & Karlsson, J. (2013). Rotatory knee laxity. Clinical Journal of Sports Medicine, 32(1), 37-46.

Alexander, P., Song, Y., Taboas, J., Chen, F., Melvin, G., Manner, P., & Tuan, R. (2013).

Development of a spring-loaded impact device to deliver injurious mechanical impacts to the articular cartilage surface. Cartilage, 14(1): 52-62.

Alexander, P., Wang, X., Song, Y., Taboas, J., Chen, F., Levin, M., McCarron, J., Melvin, G., Manner, P., & Tuan, R. (2013). Development of a spring-loaded impact device to deliver injurious mechanical impact to articular cartilage surface. Cartilage, 4(1), 52-62.

Alsalaheen, B., Whitney, S., Mucha, A., Morris, L., Furman, J., & Sparto, P. (2013). Exercise prescription patterns in patients treated with vestibular rehabilitation after concussion.

Physiotheraphy Research International, 18(2), 100-8.

Bae, K., Park, S., Shim, H., Moon, C., Kim, J., & Nemoto, E. (2013). Application of compatible dual-echo arteriovenography (CODEA) in stroke: Preliminary observations. International Journal of Imaging Systems and Technology, 23(3), 152-6.

Bellanca, J., Lowry, K., Vanswearingen, J., Brach, J., & Redfern, M. (2013). Harmonic ratios: A quantification of step to step symmetry. Journal of Biomechanics, 46(4), 828-31.

Bellas, E., Panilaitis, B., Glettig, D., Kirker-Head, C., Yoo, J., Marra, K., Rubin, J., & Kaplan, D. (2013). Sustained volume retention in vivo with adipocyte and lipoaspirate seeded silk scaffolds. Biomaterials, 34(12), 2960-8.

Benders, K., Weeren, P., Badylak, S., Saris, D., Dhert, W., & Malda, J. (2013). Extracellular matrix scaffolds for cartilage and bone regeneration. Trends in Biotechnology, 31(3), 169-76.

Bennett, W., Laube, B., Corcoran, T., Zeman, K., Sharpless, G., Thomas, K., Wu, J., Mogayzel, P., Pilewski, J., & Donaldson, S. (2013). Multi-site comparison of mucociliary and cough clearance measures using standardized methods. Journal of Aerosol Medicine Pulmonary Drug Delivery, 26(3), 157-64.

Beschorner, K., Redfern, M., & Cham, R. (2013). Earliest gait deviations during slips: Implications for recovery. IIE Transactions on Occupational Ergonomics and Human Factors, 1(1), 31-7.

168

Best, T., Gharaibeh, B., & Huard, J. (2013). Stem cells, angiogenesis and muscle healing: A potential role in massage therapies? British Journal of Sports Medicine, 47(9), 556-60.

Boertien, W., Meijer, E., Li, J., Bost, J., Struck, J., Flessner, M., Gansevoort, R., Torres, V., Chapman, A., Grantham, J., Mrug, M., Guay-Woodford, L., Bae, K., & Bennett, W. (2013).

Relationship of copeptin, a surrogate marker for arginine vasopressin, with change in total kidney volume and GFR decline in autosomal dominant polycystic kidney disease: results from the CRISP cohort. American Journal of Kidney Disease, 61(3), 420-9.

Boland, M., Schuman, J., & Mattox, C. (2013). American Glaucoma Society Position Statement: electronic data standards for clinical practice. Journal of Glaucoma, 22(2), 174-5.

Bossert, R., Dreifuss, S., Coon, D., Wollstein, A., Clavijo-Alvarez, J., Gusenoff, J., & Rubin, J. (2013). Liposuction of the arm concurrent with brachioplasty in the massive weight loss (MWL) patient: Is it safe? Plastic and Reconstructive Surgery, 131(2), 357-65.

Bourin, P., Bunnell, B., Casteilla, L., Dominici, M., Katz, A., March, K., Redl, H., Rubin, J., Yoshimura, K., & Gimble, J. (2013). Stromal cells from the adipose tissue derived stromal vascular fraction (SVF) and culture expanded adipose-derived stromal/stem cells (ASC): A joint statement of IFATS and ISCT. Cytotherapy, 15(6), 641-8.

Brown, B. & Badylak, S. (2013). Expanded applications, shifting paradigms and an improved understanding of host-biomaterial interactions. Acta Biomater, 9(2), 4948-55.

Bruns, T., Wagenaar, J., Bauman, M., Gaunt, R., & Weber, D. (2013). Real-time control of hind limb functional electrical stimulation using feedback from dorsal root ganglia recordings. Journal of Neural Engineering, 10(2), 026020.

Buckalew, N., Haut, M., Aizenstein, H., Rosano, C., Dunfee Edelman, K., Perera, S., Marrow, L., Tadic, S., Harris, T., Venkatraman, V., Hicks, G., Kritchevsky, S., Yaffe, K., & Weiner, D. (2013).

White Matter Hyperintensity burden and disability in older adults: Is chronic pain a contributor?

Physical Medicine and Rehabilitation, 5(6), 471-80.

Burk, J., Badylak, S., Kelly, J., & Brehm, W. (2013). Equine cellular therapy-from stall to bench to bedside? Cytometry Part A, 83(1), 103-13.

Candiello, J., Singh, S., Task, K., Kumta, P., & Banerjee, I. (2013). Early differentiation patterning of mouse embryonic stem cells in response to variations in alginate substrate. Journal of Biological Engineering, 7(1), 9.

Carlson, J., Menegazzi, J., & Callaway, C. (2013). Magnitude of national emergency department visits and resource utilization by the uninsured. American Journal of Emergency Medicine, 31(4), 722-6.

Chen, C., Ishikawa, H., Wollstein, G., Ling, Y., Bilonick, R., Kagemann, L., Sigal, I., & Schuman, J. (2013). Individual A-scan signal normalization between two spectral domain optical coherence tomography devices. Investigative Ophthalmology and Visual Sciences, 54(5), 3463-71.

Chen, C., Okada, M., Proto, J., Gao, X., Sekiya, N., Beckman, S., Corselli, M., Crisan, M., Saparov, A., Tobita, K., PĂŠault, B., & Huard, J. (2013). Human pericytes for ischemic heart repair. Stem Cells, 31(2), 305-16.

169

Chivukula, S., Koutourousiou, M., Snyderman, C., Fernandez-Miranda, J., Gardner, P., & TylerKabara, E. (2013). Endoscopic endonasal skull base surgery in the pediatric population. Journal of Neurosurgery: Pediatrics, 11(3), 227-41.

Chivukula, S., Koutourousiou, M., Snyderman, C., Gardner, P., & Tyler-Kabara, E. (2013).

Endoscopic endonasal skull base surgery in the pediatric population. Journal of Neurosurgery: Pediatrics, 11(3), 277-41.

Chu, H., Chen, C., Huard, J., & Wang, Y. (2013). The effect of a heparin-based coacervate of fibroblast growth factor-2 on scarring in the infarcted myocardium. Biomaterials, 34(6), 1747-56.

Cohen, A., Mowery, W., Weissfeld, L., Aizenstein, H., McDade, E., Mountz, J., Nebes, R., Saxton, J., Snitz, B., Dekosky, S., Williamson, J., Lopez, O., Price, J., Mathis, C., & Klunk, W. (2013). Classification of amyloid-positivity in controls: Comparison of visual read and quantitative approaches. Neuroimage, 71, 207-15.

Collinger, J., Boninger, M., Bruns, T., Curley, K., Wang, W., & Weber, D. (2013). Functional priorities, assistive technology, and brain-computer interfaces after spinal cord injury. Journal of Rehabilitation Research and Development, 50(2), 145-160.

Collinger, J., Wodlinger, B., Downey, J., Wang, W., Tyler-Kabara, E., Weber, D., McMorland, A., Velliste, M., Boninger, M., & Schwartz, A. (2013). High-performance neuroprosthetic control by an individual with tetraplegia. The Lancet, 381(9866), 557-64.

Corcoran, T., Thomas, K., Brown, S., Myerburg, M., Locke, L., & Pilewski, J. (2013). Liquid hyper-absorption as a cause of increased DTPA clearance in the cystic fibrosis airway. European Journal of Nuclear Medicine and Molecular Imaging Research, 3(1), 14.

Corcoran, T., Venkataramanan, R., Hoffman, R., George, M., Petrov, A., Richards, T., Zhang, S., Choi, J., Gao, Y., Oakum, C., Cook, R., & Donahoe, M. (2013). Systemic delivery of atropine sulfate by the MicroDose dry-powder inhaler. Journal of Aerosol Medicine Pulmonary Drug Delivery, 26(1), 46-55.

Cray, J. & Cooper, G. (2013). Regression modeling to inform cell incorporation into therapies for craniosynostosis. Journal of Craniogacial Surgery, 24(1), 226-231.

Crum, W., Modo, M., Vernon, A., Wastling, S., Barker, G., & Williams, S. (2013). Registration of challenging pre-clinical brain imaging. Journal of Neuroscience Methods, 216(1), 62-77.

Dâ&#x20AC;&#x2122;Amico, R., Rubin, J., Neumesiter, M., Del Vecchio, D., Cederna, P., Seward, W., & Shoaf, L. (2013). Regenerative medicine and plastic surgery. Plastic and Reconstructive Surgery, 131(2), 393-9.

Datta, M., Epur, R., Saha, P., Kadakia, K., Park, S., & Kumta, P. (2013). Tin and graphite based nanocomposites: Potential anode for sodium ion batteries. Journal of Power Sources, 225(1), 31622.

Datta, M., Kadakia, K., Velikokhatnyi, O., Jampani, P., Chung, S., Poston, J., Manivannan, A., & Kumta, P. (2013). High performance robust F-doped tin oxide based oxygen evolution electrocatalysts for PEM based water electrolysis. Journal of Materials Chemistry A, 1(12), 4026-37.

170

Diederichs, S., Shine, K., & Tuan, R. (2013). The promise and challenges of stem cell-based therapies for skeletal diseases: Stem cell applications in skeletal medicine: Potential, cell sources and characteristics, and challenges of clinical translation. BioEssays, 35(3), 220-30.

Disbrow, E., Sigvardt, K., Franz, E., Turner, R., Russo, K., Hinkley, L., Herron, T., Ventura, M., Zhang, L., & Malhado-Chang, N. (2013). Movement activation and inhibition in Parkinsonâ&#x20AC;&#x2122;s disease: a functional imaging study. Journal of Parkinson's Disease, 3(2), 181-92.

Du, Y., Yun, H., Yang, E., & Schuman, J. (2013). Stem cells from trabecular meshwork home to TM tissue in vivo. Investigative Ophthalmology Visual Science, 54(2), 1450-9.

Erickson, K., Barr, L., Weinstein, A., Banducci, S., Akl, S., Santo, N., Leckie, R., Oakley, M., Saxton, J., Aizenstein, H., Becker, J., & Lopez, O. (2013). Measuring physical activity with accelerometry in a community sample with dementia. Journal of the American Geriatric Society, 61(1), 158-59.

Fan, R., Bayoumi, A., Chen, P., Hobson, C., Wagner, W., Mayer, J., & Sacks, M. (2013). Optimal elastomeric scaffold leaflet shape for pulmonary heart valve leaflet replacement. Journal of Biomechanics, 46(4), 662-9.

Farrokhi, S., Piva, S., Gil, A., Oddis, C., Brooks, M., & Fitzgerald, G. (2013). Severity of coexisting patellofemoral disease is associated with increased impairments and functional limitations in patients with knee osteoarthritis. Arthritis Care & Research, 65(4), 544-51.

Feola, A., Abramowitch, S., Jallah, Z., Stein, S., Barone, W., Palcsey, S., & Moalli, P. (2013).

Deterioration in biomechanical properties of the vagina following implantation of a high-stiffness prolapse mesh. British Journal of Obstetrics and Gynecology, 120(2), 224-32.

Fukuda, M., Vazquez, A., Zong, X., & Kim, S-G. (2013). Effects of the Îą2-adrenergic receptor agonist dexmedetomidine on neural, vascular and BOLD fMRI responses in the somatosensory cortex. European Journal of Neuroscience, 37(1), 80-95.

Gorovoy, I., Gallagher, D., Eller, A., Mayercik, V., Friberg, T., & Schuman, J. (2013). Cystoid Hagandora, C., Gao, J., Wang, Y., & Almarza, A. (2013). Poly (glycerol sebacate): A novel scaffold material for temporomandibular joint disc engineering. Tissue Engineering Part A, 19(56), 729-37.

Hashizume, R., Fujimoto, K., Hong, Y., Guan, J., Toma, C., Tobita, K., & Wagner, W. (2016).

Biodegradable elastic patch plasty ameliorates left ventricular adverse remodeling after ischemiareperfusion injury: A preclinical study of a porous polyurethane material in a porcine model.

Journal of Thoracic and Cardiovascular Surgery, 146(2), 391-9.

Hoshino, Y., Araujo, P., Ahlden, M., Samuelsson, K., Hofbauer, M., Muller, B., Wolf, M., Irrgang, J., Fu, F., & Musahl, V. (2013). Quantitative evaluation of the pivot shift test by image analysis using the iPad. Knee Surgery, Sports Traumatology, Arthroscopy, 21(4), 975-80.

Hwang, C., Ay, B., Kaplan, D., Rubin, J., Marra, K., Atala, A., Yoo, J., & Lee, S. (2013).

Assessments of injectable alginate particle-embedded fibrin hydrogels for soft tissue reconstruction. Biomedical Materials, 8(1), 014105.

171

Ishikawa, H., Chen, C., Wollstein, G., Grimm, J., Ling, Y., Bilonick, R., Sigal, I., Kagemann, L., & Schuman, J. (2013). High dynamic range imaging concept-based signal enhancement method reduced the optical coherence tomography measurement variability. Investigative Ophthalmology & Visual Science, 54(1), 836-41.

Ishikawa, H., Chen, C., Wollstein, G., Ling, Y., Bilonick, R., Kagemann, L., Sigal, I., & Schuman, J. (2013). Individual a-scan signal normalization between two spectral domain optical coherence tomography devices. Investigative Ophthalmology & Visual Science, 54(5), 3463-71.

Jin, T., Wang, P., Zong, X., & Kim, S-G. (2013). MR imaging of the amide-proton transfer effect and the pH-insensitive nuclear overhauser effect at 9.4 T. Magnetic Resonance in Medicine, 69(3), 760-70.

Johnen, C., Chinnici, C., Triolo, F., Plettig, J., Br채utigam, K., Amico, G., Young, M., Over, P., Esteban-Vives, R., Schmelzer, E., Conaldi, P., Turner, M., Thompson, R., Zeilinger, K., Rubin, P., Vizzini, G., Gridelli, B., & Gerlach, J. (2013). Phenotypical characterization of 6-12-week gestational age human dermis and epidermal cell isolation methods for in vitro studies on epidermal progenitors. Burns, 39(2), 300-10.

Johnson, G., Curry, B., Cahalan, L., Prater, R., Beeler, M., Gartner, M., Biggerstaff, J., & Cahalan, P. (2013). In vitro assessment of blood compatibility: residual and dynamic markers of cellular activation. Journal of Biomaterials Applications, 27(8), 925-36.

Johnson, G., Gartner, M., Curry, B., Biggerstaff, J., & Cahalan, P. (2013). Effects of surfacebound and intravenously administered heparin on cell-surface interactions: inflammation and coagulation. Perfusion, 28(3), 263-71.

Johnson, N. & Wang, Y. (2013). Controlled delivery of heparin-binding EGF-like growth factor yields fast and comprehensive wound healing. Journal of Controlled Release, 166(2), 124-9.

Kadakia, K., Datta, M., Jampani, P., Park, S., & Kumta P. (2013). Novel F-doped IrO2 Oxygen Evolution Electrocatalyst for PEM based Water Electrolysis. Journal of Power Sources, 222, 3137.

Kumar, A., Schmeler, M., Karmarkar, A., Collins, D., Cooper, R., Cooper, R., Shin, H., & Holm, M. (2013). Test-retest reliability of the functional mobility assessment (FMA): A pilot study.

Disability and Rehabilitation: Assistive Technology, 8(3), 213-219.

Kurinna, S., Stratton, S., Coban, Z., Schumacher, J., Grompe, M., Duncan, A., & Barton, M. (2013). p53 regulates a mitotic transcription program and determines ploidy in normal mouse liver. Hepatology, 57(5), 2004-13.

Kwon, B., Soril, L., Bacon, M., Beattie, M., Blesch, A., Bresnahan, J., Bunge, M., Dunlop, S., Ferguson, A., Hill, C., Karimi-Abdolrezaee, S., Lu, P., McDonald, J., Oudega, M., Silver, J., Guest, J., & Tetzlaff, W. (2013). Demonstrating efficacy in preclinical studies of cellular therapies for spinal cord injury-How much is enough? Journal of Neurotrauma, 248, 30-44.

Leckie, S., Sowa, G., Bechara, B., Hartman, R., Coelho, J., Witt, W., Dong, Q., Bowman, B., Bell, K., Vo, N., Kramer, B., & Kang, J. (2013). Injection of human umbilical tissue-derived cells into the nucleus pulposus alters the course of intervertebral disc degeneration in vivo. Spine,13(3), 26372.

172

Lee, S., McLaughlin, J., Frederick, D., Zhu, L., Thambiayya, K., Wasserloos, K., Kaminski, I., Pearce, L., Peterson, J., Li, J., Latoche, J., Peck-Palmer, O., Beer-Stolz, D., Fattman, C., Alcorn, J., Oury, T., Angus, D., Pitt, B., & Kaynar, A. (2013). Metallothionein-induced zinc partitioning exacerbates hyperoxic acute lung injury. American Journal Physiology - Lung Cellular and Molelcular Physiology, 304(5), L350-60.

Li, Y., Smith, L., Hargrove, L., Weber, D., & Loeb, G. (2013). Sparse optimal motor estimation (SOME) for extracting commands for prosthetic limbs. Neural Systems and Rehabilitation Engineering IEEE Transactions, 21(1), 104-11.

Liang, R., Abramowitch, S., Knight, K., Palcsey, S., Nolfi, A., Stein, S., & Moalli, P. (2013).

Vaginal degeneration following implantation of synthetic mesh with increased stiffness. British Journal of Obstetrics and Gynecology, 120(2), 233-43.

Lin, H., Zhang, D., Alexander, P., Yang, G., Tan, J., Cheng, A., & Tuan, R. (2013). Application of visible light-based projection stereolithography for live cell-scaffold fabrication with designed architecture. Biomaterials, 34(2), 331-9.

Lin, Y., Grahovac, T., Oh, S., Ieraci, M., Rubin, J., & Marra, K. (2013). Evaluation of a multilayer adipose-derived stem cell sheet in a full-thickness wound healing model. Acta Biomaterialia, 9(2), 5243-50.

Lv, D., Xu, T., Saha, P., Datta, M., Gordin, M., Manivanna, A., Kumta, P., & Wang, D. (2013).

A scientific study of current collectors for Mg batteries in Mg(AlCl2EtBu)(2)/THF electrolyte.

Journal of the Electrochemical Society, 160(2), 351-5.

MacIsaac, Z., Levine, B., Smith, D., Cray, J., Shaw, M., Naran, S., Kinsella, C., Mooney, M., Cooper, G., & Losee, J. (2013). Novel animal model of calvarial defect: Part IV. Reconstruction of calvarial wound complicated by durectomy. Plastic and Reconstronstructive Surgery, 131(4), 512-9.

Medberry, C., Crapo, P., Siu, B., Carruthers, C., Wolf, M., Nagarkar, S., Agrawal, V., Jones, K., Kelly, J., Johnson, S., Velankar, S., Watkins, S., Modo, M., & Badylak, S. (2013). Hydrogels derived from central nervous system extracellular matrix. Biomaterials, 34(4), 1033-40.

Mifune, Y., Matsumoto, T., Takayama, K., Ota, S., Li, H., Meszaros, L., Usas, A., Nagamune, K., Gharaibeh, B., Fu, F., & Huard, J. (2013). The effect of platelet-rich plasma on the regenerative therapy of muscle derived stem cells for articular cartilage repair. Osteoarthritis Cartilage, 21(1), 175-85.

Mifune, Y., Ota, S., Takayama, K., Hoshino, Y., Matsumoto, T., Kuroda, R., Kurosaka, M., Fu, F., & Huard, J. (2013). Therapeutic advantage in selective ligament augmentation for partial tears of the anterior cruciate ligament: results in an animal model. American Journal of Sports Medicine, 41(2), 365-73.

Mikhova, K., Don, C., Laflamme, M., Kellum, J., Mulligan, M., Verrier, E., & Rabkin, D. (2013).

Effect of cytokine hemoadsorption on brain death-induced ventricular dysfunction in a porcine model. Journal of Thoracic and Cardiovascular Surgery, 145(1), 215-24.

Minteer, D., Marra, K., & Rubin, J. (2013). Adipose-derived mesenchymal stem cells: Biology and potential applications. Advances in Biochemical Engineering/Biotechology, 129, 59-71.

173

Mondelli, V., Anacker, C., Vernon, A., Cattaneo, A., Natesan, S., Modo, M., Dazzan, P., Kapur, S., & Pariente, C. (2013). Haloperidol and olanzapine mediate metabolic abnormalities through different molecular pathways. Translational Psychiatry, 3, e208.

Mountney, A., Zahner, M., Sturgill, E., Riley, C., Aston, J., Oudega, M., Schramm, L., Hurtado, A., & Schnaar, R. Sialidase, chondroitinase ABC and combination therapy after spinal cord contusion injury. Journal of Neurotrauma, 30(3), 181-90.

Mueller, M., Fischer, M., Zellner, J., Berner, A., Dienstknecht, T., Kujat, R., Prantl, L., Nerlich, M., Tuan, R., & Angele, P. (2013). Effect of parathyroid hormone-related protein in an in vitro hypertrophy model for mesenchymal stem cell chondrogenesis. International Orthopaedics, 37(5), 945-51.

Nadkarni, N., Perera, S., Rosano, C., Aizenstein, H., Brach, J., VanSwearingen, J., & StudenskI, S. (2013). White matter hyperintensities, exercise and improvement in gait speed: Does the type of gait rehabilitation matter? Journal of the American Geriatrics Society, 61(5), 686-93.

Nasto, L., Robinson, A., Ngo, K., Clauson, C., Dong, Q., St. Croix, C., Sowa, G., Pola, E., Robbins, P., Kang, J., Niedernhofer, L., Wipf, P., & Vo, N. (2013). Mitochondrial-derived reactive oxygen species (ROS) Play a causal role in aging-related intervertebral disc degeneration. Journal of Orthopaedic Research, 31(7), 1150-7.

Nasto, L., Wang, D., Robinson, A., Clauson, C., Ngo, K., Dong, Q., Roughley, P., Epperly, M., Huq, S., Pola, E., Sowa, G., Robbins, P., Kang, J., Niedernhofer, L., & Vo, N. (2013). Genotoxic stress accelerates age-associated degenerative changes in intervertebral discs. Mechanisms of Ageing and Development, 134(1-2), 35-42.

Osawa, A., Harner, C., Gharaibeh, B., Matsumoto, T., Mifune, Y., Kopf, S., Ingham, S., Schreiber, V., Usas, A., & Huard, J. (2013). The use of blood vessel-derived stem cells for meniscal regeneration and repair. Medicine and Science in Sports and Exercise, 45(5), 813-23.

Ostrowksi, N., Lee, B., Roy, A., Ramanathan, M., & Kumta, P. (2013). Biodegradable poly(lactide-co-glycolide) coatings on Magnesium alloys for orthopedic applications. Journal of Materials Science: Materials in Medicine, 24(1), 85-86.

Park, D., Larson, A., Klibanov, A., & Wang, Y. (2013). Antiviral and antibacterial polyurethanes of various modalities. Applied Biochemistry and Biotechnology, 169(4), 1134-46.

Park, D., Shah, V., Rauck, B., Friberg, T., & Wang, Y. (2013). An anti-angiogenic reverse thermal gel as a drug delivery system for age-related wet macular degeneration. Macromolecular Bioscience, 13(4), 464-9.

Pasquale, L., Loomis, S., Kang, J., Yaspan, B., Abdrabou, W., Budenz, D., Chen, T., Delbono, E., Friedman, D., Gaasterland, D., Gaasterland, T., Grosskreutz, C., Lee, R., Lichter, P., Liu, Y., McCarty, C., Moroi, S., Olson, L., Realini, T., Rhee, D., Schuman, J., Singh, K., Vollrath, D., Wollstein, G., Zack, D., Allingham, R., Pericak-Vance, M., Weinreb, R., Zhang, K., Hauser, M., Richards, J., Haines, J., & Wiggs, J. (2013). CDKN2B-AS1 genotype-glaucoma feature correlations in primary open-angle glaucoma patients from the United States. American Journal of Ophthalmology, 155(2), 342-53.

174

Rabuck, S., Musahl, V., Fu, F., & West, R. (2013). Anatomic ACL reconstruction with quadriceps tendon autograft. Clinical Journal of Sports Medicine, 32(1), 155-64.

Reder, L., Victoria, L., Manelis, A., Oates, J., Dutcher, J., Bates, J., Cook, S., Aizenstein, H., Quinlan, J., & Gyulai, F. (2013). Why itâ&#x20AC;&#x2122;s easier to remember seeing a face we already know than one we donâ&#x20AC;&#x2122;t: Preexisting memory representations facilitate memory formation. Psychological Science, 24(3), 363-372.

Rice, I., Pohlig, R., Gallagher, J., & Boninger, M. (2013). Hand rim wheelchair propulsion training effect on overground propulsion using biomechanical real time visual feedback. Archives of Physical Medicine and Rehabilitation, 94(2), 256-63.

Rine, R., Schubert, M., Whitney, S., Roberts, D., Redfern, M., Musolino, M., Roche, J., Steed, D., Corbin, B., Lin, C-C., Marchetti, G., Beaumont, J., Carey, J., Shepard, N., Jacobson, G., Wrisley, D., Hoffman, H., Furman, G., & Slotkin, J. (2013). Vestibular function assessment using the NIH toolbox. Neurology, 80(11 Suppl 3), S25-31.

Rogers, N., Isenberg, J., & Thomson, A. (2013). Plasmacytoid dendritic cells: No longer an enigma and now key to transplant tolerance? American Journal of Transplantation, 13(5), 112533.

Rosano, C., Watson, N., Chang, Y., Newman, A., Aizenstein, H., Du, Y., Venkatraman, V., Harris, T., Barinas-Mitchell, E., & Sutton-Tyrrell, K. (2013). Aortic pulse wave velocity predicts focal white matter hyperintensities in a biracial cohort of older adults. Hypertension, 61(1), 160-5.

Samosky, J., Thornburg, A., Karkhanis, T., Petraglia, F., Strickler, E., Nelson, D., Weaver, R., & Robinson, E. (2013). Enhancing medical device training with hybrid physical-virtual simulators: Smart peripherals for virtual devices. Studies in Health Technology and Informatics, 184, 377-9.

Samuelsson, K., Ahlden, M., Musahl, V., & Karlsson, J. (2013). Trends in surgeons preferences on anterior cruciate ligament reconstructive techniques. Clinical Journal of Sports Medicine, 32(1), 111-126.

Sehi, M., Zhang, X., Greenfield, D., Chung, Y., Wollstein, G., Francis, B., Schuman, J., Varma, R., & Huang, D. (2013). Retinal nerve fiber layer atrophy is associated with visual field loss over time in glaucoma suspect and glaucomatous eyes. American Journal of Ophthalmology, 155(1), 73-82.

Sehi, M., Zhang, X., Greenfield, D., Chung, Y., Wollstein, G., Francis, B., Schuman, J., Varma, R., & Huang, D. (2013).Retinal nerve fiber layer atrophy is associated with visual field loss over time in glaucoma suspect and glaucomatous eyes. American Journal of Ophthalmology, 155(1), 73-82.

Sekiya, N., Tobita, K., Beckman, S., Okada, M., Gharaibeh, B., Sawa, Y., Kormos, R., & Huard, J. (2013). Muscle-derived stem cell sheets support pump function and prevent cardiac arrhythmias in a model of chronic myocardial infarction. Molecular Therapy, 21(3), 662-9.

Sindall, P., Lenton, J., Tolfrey, K., Cooper, R., & Goosey-Tolfrey, V. (2013). Wheelchair tennis match-play demands: effect of player rank and result. International Journal of Sports Physiology and Performance, 8(1), 28-37.

175

Skoczylas, L., Jallah, Z., Sugino, Y., Stein, S., Feola, A., Yoshimura, N., & Moalli, P. (2013).

Regional differences in rat vaginal smooth muscle contractility and morphology. Reproductive Sciences, 20(4), 382-90.

Smith, M. & Sommer, M. (2013). Spatial and temporal scales of neuronal correlation in visual area V4. Journal of Neuroscience, 33(12), 5422–32.

Smith, M., Jia, X., Zandvakili, A., & Kohn, A. (2013). Laminar dependence of neuronal correlations in visual cortex. Journal of Neurophysiology, 109(4), 940–7.

Song, M., Lavasani, M., Thompson, S., Lu, A., Ahani, B., & Huard, J. (2013). Muscle-derived stem/progenitor cell dysfunction in Zmpste24-deficient progeroid mice limits muscle regeneration.

Stem Cell Research & Therapy, 4(2), 33.

Soto-Pantoga, D., Stein, E., Rogers, N., Sharifi-Sanjani, M., Isenberg, J., & Roberts, D. (2013).

Therapeutic opportunities for targeting the ubiquitous cell surface receptor CD47. Expert Opinions on Therapeutic Targets, 17(1), 89-103.

Sparto, P., Fuhrman, S., Redfern, M., Jennings, R., Perera, S., Nebes, R., & Furman, J. (2013).

Postural adjustment errors reveal deficits in inhibition during lateral step initiation in older adults.

Journal of Neurophysiology, 109(2), 415-28.

Stille, M., Smith, E., Crum, W., & Modo, M. (2013). 3D reconstruction of 2D fluorescence histology images and registration with in vivo MR images: Application in a rodent model of stroke. Journal of Neuroscience Methods, 219(1), 27-40.

Stippler, M., Ortiz, V., Adelson, P., Chang, Y., Tyler-Kabara, E., Wisniewski, S., Fink, E., Kochanek, P., Brown, S., & Bell, M. (2013). Brain tissue oxygen (PbO2) monitoring after severe traumatic brain injury (TBI) in children - Relationship to outcome and association with other clinical parameters. Journal of Neurosurgery: Pediatrics, 10(5), 383-91.

Thampatty, B., Klamerus, M., Oberly, P., Feldma, K., Bell, M., Tyler-Kabara, E., Adelson, P., Clark, R., Kochanek, P., & Poloyac, S. (2013). Hypothermia decreases cerebrospinal fluid asymmetric dimethyl arginine levels in traumatic brain injury children. Pediatric Critical Care Medicine, 14(4), 403-12.

Tuan, R., Chen, A., & Klatt, B. (2013). Cartilage regeneration. Journal of the American Academy of Orthopaedic Surgeons, 21(5), 303-11.

Turner, N. & Badylak, S. (2013). Biologic scaffolds for musculotendinous tissue repair. European Cells and Materials, 25, 130-43.

Unadkat, J., Bourbeau, D., Afrooz, P., Solari, M., Washington, K., Pulikkottil, B., Weber, D., & Lee, W. (2013). Functional outcomes following multiple acute rejections in experimental vascularized composite allotransplantation. Plastic and Reconstructive Surgery, 131(5), 720e–30e.

Uttam, S., Alexandrov, S., Bista, R., & Liu, Y. (2013). Tomographic imaging via spectral encoding of spatial frequency. Optics Express, 21(6), 7488-504.

176

Uttam, S., Bista, R., Staton, K., Alexandrov, S., Choi, S., Bakkenist, C., Hartman, D., Brand, R., & Liu, Y. (2013). Investigation of depth-resolved nanoscale structural changes in regulated cell proliferation and chromatin decondensation. Biomedical Optics Express, 4(4), 596-613.

Vo, N., Hartman, R., Yurube, T., Jacobs, L., Sowa, G., & Kang, J. (2013). Expression and regulation of metalloproteinases and their inhibitors in intervertebral disc aging and degeneration.

Spine Journal, 13(3), 331-41.

Wang, J., Liou, A., Ren, Z., Zhang, L., Brown, B., Cui, X., Badylak, S., Cai, Y., Guan, Y., Leak, R., Chen, J., Ji, X., & Chen, L. (2013). Neurorestorative effect of urinary bladder matrix-mediated neural stem cell transplantation following traumatic brain injury in rats. CNS & Neurological Disorders Drug Targets, 12(3), 413-25.

Whitney, S., Sparto, P., & Furman, J. (2013). Symptoms elicited in persons with vestibular dysfunction while performing gaze movements in optic flow environments. Journal of Vestibular Research, 23(1), 51-60.

Wong, T., Piehler, K., Puntil, K., Moguillansky, D., Meier, C., Lacomis, J., Kellman, P., Cook, S., Schwartzman, D., Simon, M., Mulukutla, S., & Schelbert, E. (2013). Effectiveness of late gadolinium enhancement to improve outcomes prediction in patients referred for cardiovascular magnetic resonance after echocardiography. Journal of Cardiovascular Magnetic Resonance, 15(6).

Woods, A., Colsch, B., Jackson, S., Post, J., Baldwin, K., Roux, A., Hoffer, B., Cox, B., Hoffer, M., Rubovitch, V., Pick, C., Schultz, J., & Balaban, C. (2013). Gangliosides and ceramides change in a mouse model of blast induced traumatic brain injury. ACS Chemical Neuroscience, 4(4), 594-600.

Wu, C-H., Chen, B-F., & Hung, T-K. (2013). Hydrodynamic forces induced by transient sloshing in a 3D rectangular tank due to oblique horizontal excitation. Computers & Mathematics with Applications, 65(8), 1163-86.

Wu, J., Wang, Y., Simon, M., Sacks, M., & Brigham, J. (2013).A new computational framework for anatomically consistent 3D statistical shape analysis with clinical imaging applications.

Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization, 1(1), 13-27.

Xu, Q., Gao, Z., Wang, H., He, J., Mao, Z-H., & Sun, M. (2013). Batteries not included: a matbased wireless power transfer system for implantable medical devices as a moving target. IEEE Microwave Magazine, 14(2), 63-72.

Yagi, H., Tan, J., & Tuan, R. (2013). Polyphenols suppress hydrogen peroxide-induced oxidative stress in human bone-marrow derived mesenchymal stem cells. Journal of Cellular Biochemistry, 114(5), 1163-73.

Yu, J., Takanari, K., Hong, Y., Lee, K., Amoroso, N., Wang, Y., Wagner, W., & Kim, K. (2013).

Non-invasive characterization of polyurethane-based tissue constructs in a rat abdominal repair model using high frequency ultrasound elasticity imaging. Biomaterials, 34(11), 2701-09.

177

Zheng, H., Zhao, T., Qian, Y., Ibrahim, T., Boada, F. (2013). Multi-slice parallel transmission three-dismensional tailored RF (PTX 3DTRF) pulse design for signal recovery in ultra-high field functional MRI. Journal of Magnetic Resonance, 228, 37-44.

Zimmerlin, L., Donnenberg, V., Rubin, J., & Donnenberg, A. (2013).Mesenchymal markers on human adipose stem/progenitor cells. Cytometry A, 83(1), 134-40.

Zimmerlin, L., Rubin, J., Pfeifer, M., Moore, L., Donnenberg, V., & Donnenberg, A. (2013).

Human adipose stromal vascular cell delivery in a fibrin spray. Cytotherapy, 15(1), 102-8.

Department of Chemical and Petroleum Engineering Aguiló-Aguayo, N., Liu, Z., Bertran, E., Yang, J.C., “Thermal-Induced Structural Evolution of Carbon-Encapsulated Iron Nanoparticles Generated by Two Different Methods.” J. Phys. Chem.

C.117 (37). 19167–19174. (2013).

Alenzi, A., Marinack, M., Higgs, C.F., McCarthy, J.J., “DEM validation using an annular shear cell.” Powder Technology. 248. 131142. (2013).

Andriotis A.N., Mpourmpakis G., Lisenkov S., Sheetz R.M., Menon M., “U-calculation of the LSDA plus U functional using the hybrid B3LYP and HSE functionals.” Phys. Status Solidi.. 250.

356-363. (2013).

Babatunde, B.A.,Wu, Y., Baled, H.O., Enick, R.M., Burgess, W., Tapriyal, D., McHugh, M., “Experimental density measurements of bis(2-ethylhexyl) phthalate at elevated temperatures and pressures.” Journal of Chemical Thermodynamics. 63. 102-107. (2013).

Balazs, A.C., “Designing Materials that Appear to ‘Think’.” Mines Medal. Rushmore Plaza Civic Center. Rapid City, SD. (2013).

Balazs, A.C., “Designing Self-regenerating Polymer Gels.” Symposium on “Modeling and Theory-Driven Design of Soft Materials.” MRS Fall Meeting. Boston, MA. (2013).

Balazs, A.C., “Modeling Active Polymer Gels.” 34th Australian Polymer Society Meeting.

Darwin, Australia. (2013).

Balazs, A.C., “Modeling self-healing in dual cross-linked nanoparticle networks.” Fourth International Conference on Self-healing Materials. Ghent, Belgium. (2013) Balazs, A.C., “Polymer Chemistry: Wasted Loops Quantified.” Nature, 493. 172-173. (2013).

Balazs, A.C., “Reconfigurable Assemblies of Active, Auto-chemotactic Gels.” Isaac Newton Institute for Mathematical Sciences, Workshop on Dynamics of Suspensions, Gels, Cells and Tissues. Cambridge, UK. (2013).

Balazs, A.C., “Self-healing in Dual Cross-linked Nanoparticle Composites.” Composites at Lake Louise Conference. Lake Louise, Alberta, Canada. (2013).

178

Baled, H., Tapriyal, D., Morreale, B., Soong, Y., Krukonis, V., Babatunde, B., Wu, Y., McHugh, M., Burgess, W., Enick, R.M., “Exploratory Characterization of a Perfluoropolyether Oil as a Possible Viscosity Standard at Deepwater Production Conditions of 533 K and 241 MPa, submitted to International.” Journal of Thermophysics. 34. 1845-1864. (2013).

Baled, H.O., Xing, D., Wu, Y., Bamgbade, B.A., McHugh, M.A., Downey, P., Tapriyal, D., Morreale, B.D., Enick, R.M., “Viscosity of long-chain n-alkanes at pressures up to 243 MPa and temperatures up to 520 K.” Journal of Chemical & Engineering. 34. 10. 1845-1864. (2013).

Balmert, S. C., Little, S.R. “Biomimetic, Anisotropic Drug Delivery Systems.” Handbook of Biomimetics and Bioinspiration: Volume I, World Scientific Publishing, Singapore. (2013).

Basha, O., Keller, M., Luebke, D., Resnik, K., Morsi, B.I., "Development of a Conceptual Process for Selective CO2 Capture from Fuel Gas Streams Using [hmim][Tf2N] Ionic Liquid as a Physical Solvent." Energy & Fuels. 27 (7). 3905-3917. (2013).

Basha, O.M., Sehabiague, L., Keller, M.J., Luebke, D.R., Resnik, K.P., Morsi, B.I., “Assessing the Feasibility of Using Ionic Liquids as Physical Solvents for Selective Capture of CO2 from Fuel Gas Streams.” Thirtieth Annual International Pittsburgh Coal Conference. Beijing, China. (2013).

Basha, O.M., Sehabiague, L., Keller, M.J., Luebke, D.R., Resnik, K.P., Morsi, B.I., “Assessing the Feasibility of Using Ionic Liquids as Physical Solvents for Selective Capture of CO2 from Fuel Gas Streams.” Proceedings of the Thirtieth Annual International Pittsburgh Coal Conference.

Beijing, China. (2013).

Benson, E.E., Sampson, M.D., Grice, K.A., Smieja, J.M., Froehlich, J.D., Friebel, D., Keith, J.A., Carter, E.A., Nilsson, A., Kubiak, C.P., “The Electronic States of Rhenium Bipyridyl Electrocatalysts for CO2 Reduction as Revealed by X-ray Absorption Spectroscopy and Computational Quantum Chemistry.” Angew. Chem. Int. Ed. .52. 4841–4844. (2013).

Bhattacharya, A., Balazs, A.C., “Stiffness-Modulated Motion of Soft Microscopic Particles over Active Adhesive Cilia.” Soft Matter. 9. 3945 – 3955. (2013).

Bhavsar, S., More, A., Veser, G., “Fe and Mn-Based Oxygen Carriers for Chemical Looping Combustion.” AIChE Annual Meeting. San Francisco, CA. (2013).

Bhavsar, S., Tackett, B., More, A., Veser, G., “Syngas Production via Chemical Looping Partial Oxidation.” 23rd Meeting of the North American Catalysis Society (NAM23). Louisville, KY. (2013).

Bhavsar, S., Veser, G., “Bimetallic Fe-Ni Oxygen Carriers for Chemical Looping Combustion.”

Ind. Eng. Chem. Res.. 52. 15342–15352. (2013).

Bhavsar, S., Veser, G., “Chemical Looping – A Novel Process for Syngas Generation.” PCCS Spring Meeting. Pittsburgh, PA. (2013).

Bhavsar, S., Veser, G., “Chemical Looping – A Novel Process for Syngas Generation.” Prepr.

Pap.-Am. Chem. Soc., Div. Energy Fuels. (2013).

179

Bhavsar, S., Veser, G., “Ni-, Fe-, and bimetallic FeNi-CeO2 oxygen carriers for application in Chemical Looping Combustion.” Prepr. Pap.-Am. Chem. Soc., Div. Energy Fuels. (2013).

Bhavsar, S., Veser, G., “Reducible Supports for Ni-based Oxygen Carriers in Chemical Looping Combustion.” Energy Fuels. 27. 2073–2084. (2013).

Bodnar, C.A., Schanck, J.F., Raghavan, K., Smith, N.G., Hess, K., Buirge, B. M., Melvin, R., Hackett, B..”Work in Progress: Starfish Schoolhouse: Development of a Story Based E-Learning Module to Teach Regenerative Medicine Concepts to Middle and High School Students and Teachers.” ASEE 2013 Annual Conference and Exposition. Atlanta, Georgia. (2013).

Burgess, W.A., Tapriyal, D., Morreale, B.D., Enick, R.M., “Volume-translated cubic EoS and PC-SAFT density models and a free volume-based viscosity model for hydrocarbons at extreme temperature and pressure conditions.” Fluid Phase Equilibria. 359. 38-44. (2013).

Candiello, J., Singh, S.S., Task, K., Kumta, P.N., Banerjee, I., “Early differentiation patterning of mouse embryonic stem cells in response to variations in alginate substrate.” Journal of Biological Engineering. 7.9. (2013).

Chan, W.F., Chen, H.Y., Surapathi, A., Taylor, M.G., Marand, E., Shao, X., Johnson, J.K., “Zwitterion Functionalized Carbon Nanotube/Polyamide Nanocomposite Membranes for Water Desalination.”ACS Nano. 7. 5308-5319. (2013).

Chen, D.L., Mandeltort, L., Saidi, W.A., Yates, J.T., Milton, W.C., Johnson, J.K., “Is there a difference in van der Waals interactions between rare gas atoms adsorbed on metallic and semiconducting single walled carbon nanotubes?” Physical Review Letters. 110. 135503. (2013).

Chen, D.L., Mandeltort, L., Wissam, S.A., Cole, M.W., Yates, J.T., Johnson, J.K., “Experimental and Theoretical Comparison of Gas Desorption Energies On Metallic and Semiconducting Single Walled Carbon Nanotubes.” AIChE Annual Meeting. San Francisco, CA. (2013).

Chen, H.Y., Chan, W.F., Marand, E., Johnson, J.K., “Simulations and Experiments of Carbon Nanotube-Polyamide Nanocomposite Membranes for Water Desalination.” AIChE Annual Meeting. San Francisco, CA. (2013).

Christiansen M., Mpourmpakis G., Vlachos D.G., “DFT-Computed Mechanisms of Ethylene and Diethyl Ether Formation from Ethanol on γ-Al2O3(100) .” ACS Catal.. 3. 1965–1975. (2013).

Culp, J.T., Chen, D.L., Liu, J., Chirdon, D., Goodman, A., Johnson, J.K., “Effect of Spin Crossover Induced Pore Contraction on CO2–Host Interactions in the Porous Coordination Polymers Fe(Pyrazine)M(CN)4 (M = Ni, Pt).” European Journal of Inorganic Chemistry. 4. 511519. (2013).

Dayal, P., Kuksenok, O., Balazs, A.C., “Reconfigurable Assemblies of Active, Autochemotactic Gels.” PNAS. 110. 431-436. (2013).

Desai, U.V., Xu, C., Wu, J., Gao, D., “Hybrid TiO2–SnO2 Nanotube Arrays for Dye-Sensitized Solar Cells,” J. Phys. Chem. C. 117. 7. 3232–3239. (2013).

180

Dutt, M., Kuksenok, O., Balazs, A.C., “Nano-pipette Directed Transport of Nanotube Transmembrane Channels and Hybrid Vesicles.” Nanoscale, 5. 9773-9784. (2013).

Enick, R.M., Koronaios, P., Stevenson, C., “Hydrophobic Polymeric Solvents for the Selective Absorption of CO2 from Warm Gas Streams that also Contain H2 and H2O .” Energy and Fuels.

27. 11. 6913-6920. (2013).

Enick, R.M., Koronaios, P., Stevenson, C., Warman, S., Morsi, B., Nulwala, H., Luebke, D., “Hydrophobic Polymeric Solvents for the Selective Absorption of CO2 from Warm Gas Streams that also Contain H2 and H2O.” Energy & Fuels. 27 (11). 6913–6920. (2013).

Ewing, C.S., Johnson, J.K., McCarthy, J.J., Veser, G., “First Principles Thermodynamics of Amorphous Silica.” AIChE Annual Meeting, San Francisco. CA. (2013).

Feng S., Bagia C., Mpourmpakis G., “Determination of Proton Affinities and Acidity Constants of Sugars.” J. Phys. Chem. A. 117. 5211-5219. (2013).

Gao, D., “Ice Release Coatings; Phase Transitions at Interfaces.” 87th ACS Colloid & Surface Science Symposium. Riverside, CA. (2013).

Gawel, S.P., Clermont, G., Ho, T., Newman, B.M., Maalouf, J., Yegneswaran, B., Parker, R.S., “Model-Based Estimation and Control for Personalized Real-Time Glucose Control in Intensive Care." SIAM Conference on Control and its Applications. San Diego, CA. (2013).

Gilbert, T.W., Badylak, S.F., Beckman, E.J., Clower, D.M., Rubin, J.P., “Prevention of seroma formation with TissuGlu surgical adhesive in a canine abdominoplasty model: long term clinical and histological studies,.” J Plast, Recon, and Aesth Surg. 66. 414-422. (2013).

Glowacki, A.J., Yoshizawa, S.A., Jhunjhunwala, S., Vieira, A.E., Garlet, G.P., Sfeir, C.S., Little S.R., “Prevention of Inflammation-Mediated Bone Loss in Murine and Canine Periodontal Disease via Recruitment of Regulatory Lymphocytes.” Proceedings of the National Academy of Science.

110(46). 18525-30. (2013).

Goh S-K., Bertera S., Banerjee I., “Perfusion-decellularization of Pancreas as a Scaffold for the Differentiation of Human Embryonic Stem Cells into Insulin-Producing Cells.” American Institute of Chemical Engineers (AIChE). San Francisco, CA. (2013).

Goh S-K., Bertera S., Banerjee I., “Perfusion-decellularization of Pancreas as a Scaffold for the Differentiation of Human Embryonic Stem Cells into Insulin-Producing Cells.” Biomedical Engineering Society Annual Fall Meeting. Seattle,WA. (2013).

Goh, S.K., Bertera, S., Olsen, P., Candiello, J.E., Halfter, W., Uechi, G., Balasubramani, M., Johnson, S.A., Sicari, B.M., Kollar, E., Badylak, S., Banerjee, I., “Perfusion-decellularized pancreas as a natural 3D scaffold for pancreatic tissue and whole organ engineering.”

Biomaterials. 34. 6760-72. (2013).

Goh, S.K., Olsen, P., Banerjee, I., “Extracellular matrix aggregates from differentiating embryoid bodies as a scaffold to support ESC proliferation and differentiation.” PLOS One. 8. e61856.

(2013).

181

Gong, X., Frankert, S., Wang, Y., Li, L., “Thickness-dependent molecular arrangement and topography of ultrathin ionic liquid films on a silica surface.” Chem. Commun.. 2013. 49(71).

7804. (2013).

Gottardi, R., Hwang, M.P., Simson, M., Manner, P.A., Tan, J., Alexander, P.G., Little, S.R., Tuan, R.S., “Autologous Stem Cell Recruitment for Articular Cartilage Regeneration.” TERMIS-AM: Annual Conference. Las Vegas, NV, (2013).

Götz, M., Ortloff, F., Reimert, R., Basha,O., Morsi, B.I., T. Kolb, "Evaluation of Organic and Ionic Liquids for Three-Phase Methanation and Biogas Purification Processes." Energy & Fuels.

11 (1). 1-22. (2013).

Ho, T. Parker, R.S., “An Algorithm for Patient-Specific Cancer Chemotherapy Scheduling."

AIChE Annual Meeting. San Francisco, CA. (2013).

Ho, T., Clermont, G., Parker, R.S., “A Model of Neutrophil Dynamics in Response to Inammatory and Cancer Chemotherapy Challenges." Computers and Chemical Engineering. 51 (1). 187-196. (2013).

Iyer, B.V.S., Salib, I.G., Yashin, V.V., Kowalewski, T., Matyjaszewski, K., Balazs, A.C., “Modeling the response of dual cross-linked nanoparticle networks to mechanical deformation.”

Soft Matter. 9. 109-121. (2013).

Iyer, B.V.S., Yashin, V.V., Kowalewski, T., Matyjaszewski, K., Balazs, A.C., “Strain Recovery and Self-healing in Dual Cross-linked Nanoparticle Networks.” Polymer Chemistry, 4. 4927 – 4939. (2013).

Jhunjhunwala, S., Raimondi, G., Nichols, E., Thomson, A.W., Little, S.R., “All-trans Retinoic Acid and Rapamycin Synergize with Transforming Growth Factor-beta 1 to Induce Regulatory T Cells with Different Migratory Capacities.” Journal of Leukocyte Biology. 94(5). 981-9. (2013).

Kaladhar Kamalasanan, Riccardo Gottardi, Susheng Tan, Yanan Chen, Bhaskar Godugu, Sam Rothstein, Balazs, A.C., Alexander Star, Little, S.R., “‘Zero-Dimensional’ Single-Walled Carbon Nanotubes.” Angewandte Chemie, 52. 11308 –11312. (2013).

Kamalasanan, K., Gottardi, R., Tan, S., Chen, Y., Gonduru, B., Rothstein, S.N., Star, A., Little, S.R., “Zero Dimensional Single Walled Carbon Nanotubes.” Angewandte Chemie International Edition. 52(43).11308-12. (2013).

Kanan, D.K., Keith, J.A., Carter, E.A., “Water Adsorption on MnO:ZnO(001) - From Single Molecules To Bilayer Coverage.” Surf. Sci. 617, 218–224. (2013).

Kang, Y., Lu, P., Zhang, X., Liu, Z., Sturgeon, J.L., Mastovich, J., Shan, Z., Yang, J.C, "In situ Studies of Catalytic Growth of SiC Nanowire.” Microscopy and Microanalysis. (2013).

Kang, Y., Luo, L., Tong, X., Starr, D., Zhou, G., Yang, J.C., “Transient Oxidation of Cu5at.%Ni(001): Temperature Dependent Sequential Oxide Formation.” Oxidation of Metals. 79.

303-311. (2013).

182

Keith, J.A., 246th ACS National Meeting, PHYS division session on “Solar Energy Conversion.”

Indianapolis, IN. (2013).

Keith, J.A., 247th ACS National Meeting, ENFL division session on “Innovations in Carbon Dioxide Capture, Storage, Conversion, and Utilization,” Dallas, TX. (2013).

Keith, J.A., AIChE National Meeting, “Applications of DFT+X to Catalysis II” Session. San Francisco, CA. (2013).

Keith, J.A., Carter, E.A., “Theoretical Insights into Electrochemical CO2 Reduction Mechanisms Catalyzed by Surface Bound Nitrogen Heterocycles.” J. Phys. Chem. Lett..4. 4058-4063. (2013).

Keith, J.A., International Conference on Carbon Dioxide Utilization. Alexandria, VA. (2013).

Keith, J.A., Carter, E.A., “Electrochemical Reactivities of Pyridinium in Solution: Consequences for CO2 Reduction Mechanisms.” Chem. Sci. 4. 1490–1496. (2013).

Keith, J.A., Grice, K.A., Kubiak, C.P., Carter, E.A., “Elucidation of the Selectivity of ProtonDependent Electrocatalytic CO2 Reduction by fac-Re(bpy)(CO)3Cl.” J. Am. Chem. Soc.135.

15823–15829. (2013).

Klinzing, G.E. “Experiencing solids processing education and research in Israel, Australia and Germany.” Powder and Bulk Engineering. (2013).

Kolmakov, G.V., Salib, I.G., Balazs, A.C., “Modeling Self-healing Processes in Polymers: From Nanogels to Nanoparticle-filled Microcapsules.” Self Healing Polymers, W. Binder, Ed., Wiley, Chapter 3, 91-111. (2013).

Kozbial, A., Li, Z., Iasella, S., Taylor, A., Morganstein, B., Wang, Y., Sun, J., Zhou, B., Randall, N., Liu, H., Li, L. “Lubricating graphene with a nanometer-thick perfluoropolyether.” Thin Solid Films. 549. 299. (2013).

Kuksenok, O., Balazs, A.C., “Modeling the Photo-induced Reconfiguration and Directed Motion of Polymer Gels.” Adv. Func. Mater., 23. 4601-4610. (2013).

Kuksenok, O., Dayal, P., Bhattacharya, A., Yashin, V.V., Deb, D., Chen, I.C., Van Vliet, K.J., Balazs, A.C., “Chemo-responsive, Self-Oscillating Gels that Undergo Biomimetic Communication.” Chem. Soc. Rev., 42. 7257 – 7277. (2013).

Lai, Y., Veser, G., “A Nanostructured ZnO@ZSM-5 Catalyst for Dehydroaromatization of Methane to Benzene.” PCCS Spring Meeting. Pittsburgh, PA. (2013).

Lai, Y., Veser, G., “ZnO@ZSM-5 Nanostructured Core-Shell Catalysts for Methane Dehydroaromatization to Benzene.” AIChE Annual Meeting. San Francisco, CA. (2013).

Lash, M.H., Fedorchak, M.V., McCarthy, J.J., Little, S.R., “Artificial Thermalization of NonBrownian Microparticles for the Fabrication of Close-Packed Colloidal Crystals.” AIChE Annual Meeting. San Francisco, CA. (2013).

183

Lash, M.H., Little, S. R., McCarthy J. J., “Artificial Thermalization of Non-Brownian Microparticles for the Fabrication of Close-Packed Colloidal Crystals.” AIChE Annual Meeting.

San Francisco, CA. (2013).

Li L., Li, Z., Wang, Y., Liu, H., “On the intrinsic wettability of grapheme.” AICHE Annual Meeting. San Francisco, CA. (2013).

Li, L., Gong, X., Frankert, S., Wang, Y., “Thickness-dependent molecular arrangement and topography of ultrathin ionic liquid films on a silica substrate.” AICHE Annual Meeting. San Francisco, CA. (2013).

Li, L., Wang, L.L., Sanchez, S.I., Kang, J.H., Wang, Q., Ahange, Z., Frenkel, A.I., Johnson, D.D., Nuzzo, R.G., Yang, J.C., “Noncrystalline to Crystalline Transformations in Pt Nanoparticles.” J. Am. Chem. Soc. 135 (35). 13062-13072. (2013).

Li, L., Wang, Y., “Effect of the chemical structure of the nanometer-thick polymer coatings on the simultaneously oleophobic/hydrophilic behavior.” AICHE Annual Meeting. San Francisco, CA. (2013).

Li, P., Henkelman, G., Johnson, K.J., “A Computational Study of the NaBH4 Hydrolysis Reaction for Hydrogen Production.” AIChE Annual Meeting. San Francisco, CA. (2013).

Li, P., Lin Y., Michael A.M., Wissam A.S., Johnson, J.K., “Deliquescence of NaBH4 from Density Functional Theory and Experiments.” Industrial & Engineering Chemistry Research. 52.

13849-13861. (2013).

Li, T., Chen, D.L., Sullivan, J.E., Kozlowski, M.T., Johnson, J.K., Rosi, N.L., “Systematic Modulation and Enhancement of CO2:N2 Selectivity and Water Stability in an Isoreticular Series of Bio-MOF-11 Analogues.” Chemical Science. 4. 1746-1755. (2013).

Li, Z., Wang, Y., Kozbial, A., Shenoy, G., Zhou, F., McGinley, R., Ireland, P., Morganstein, B., Kunkel, A., Surwade, S. P., Li, L., Liu, H., “Effect of airborne contaminants on the wettability of supported graphene and graphite.” Nature Mater. 12. 925. (2013).

Lievano, D.M., McCarthy, J.J., “Energy-Efficient Rate-Based Particle Separation.” AIChE Annual Meeting. San Francisco. CA. (2013).

Lievano, D.M., McCarthy, J.J., “Passive Separation of Granular Materials.” American Physical Society - Division of Fluid Dynamics Annual Meeting. Pittsburgh, PA. (2013).

Little, S.R., “Next Generation Controlled Release Systems for Immunoregulation. Biomaterials for Immunological Applications.” American Institute of Chemical Engineering Annual Meeting.

San Francisco, CA. (2013).

Liu, Y. Kuksenok, O., Balazs, A.C., “Using Light to Guide the Motion of Nanorods in Photoresponsive Binary Blends: Designing”, Langmuir, 29. 12785–12795. (2013).

184

Liu, Y., Kuksenok, O., Balazs, A.C., “Co-assembly of Nanorods and Photosensitive Binary Blends: ‘Combing” with Light to Create Periodically Ordered Nanocomposites.” Langmuir. 29.

750-760. (2013).

Mahoney, S., Najera, M., Bai, Q., Burton, E., Veser, G., “Development of in-Vivo Screening Benchmark for Complex Engineered Silica Nanoparticles.” AIChE Annual Meeting. San Francisco, CA. (2013).

Mahoney, S., Najera, M., Bai, Q., Burton, E., Veser, G., “Development of in-Vivo Screening Benchmark for Complex Engineered Silica Nanoparticles.” Allegheny-Erie Society of Toxicology Meeting. Morgantown, WV. (2013).

Mandeltort, L., Chen, D.L., Wissam, S.A., Johnson, J.K., Milton, W.C., Yates, J.T., “Experimental and Theoretical Comparison of Gas Desorption Energies on Metallic- and Semiconducting Single Walled Carbon Nanotubes.” Journal of the American Chemical Society.

135. 7768-7776. (2013).

Markovetz, M.R., Locke, L.W., Myerburg, M.M., Pilewski, J.M., Corcoran, T.E., Parker, R.S., “Improving the Resolution of Functional Imaging Data using in silico Modeling." North American Cystic Fibrosis Conference. Salt Lake City, UT. October (2013).

Mathew S., Task K., Banerjee, I., “Systems analysis of human embryonic stem cells.” Tissue Engineering and Regenerative Medicine International Society (TERMIS). Atlanta, GA. (2013).

Matthew S., Banerjee I., “A global sensitivity approach for the analysis of intracellular PI3K/ AKT signaling pathway during definitive endoderm induction of human embryonic stem cells.”

American Institute of Chemical Engineers (AIChE), San Francisco, CA. (2013).

McCarthy, J.J., “Rate-Based Particle Separation: A Granular ‘Chromatograph’,” American Physical Society - Division of Fluid Dynamics Annual Meeting. Pittsburgh, PA. (2013).

McCarthy, J.J., “REU Site: Particle-Based Functional Materials for Energy, Biomedicine, and Sustainability.” ASEE Annual Conference. Atlanta, GA. (2013).

McCarthy, J.J., “REU Site: Particle-Based Functional Materials for Energy, Biomedicine, and Sustainability.” Proceedings of the American Society for Eng. Ed. (2013).

Medberry, C.J., Velankar, S.S., “Hydrogels derived from central nervous system extracellular matrix.” Biomaterials. 34(4).1033-1040. (2013).

Morsi, B.I., "Modeling and Simulating F-T Process in Slurry Bubble Column Reactors Using Different Kinetic Rate Expressions for Iron and Cobalt Catalysts." Plenary Talk at the 15th Balkan Mineral Processing Congress. Sozopol, Bulgaria. (2013).

Mpourmpakis, G., “Understanding the Alcohol Dehydration on Metal Oxides.” AICHE 2013 National Meeting. San Francisco, CA. (2013).

Nagarkar, S., Velankar, S.S., “Rheology and morphology of model immiscible polymer blends with monodisperse spherical particles at the interface.” Journal of Rheology. 57(3). 901-926. (2013).

185

Najera, M., Grace, H., Bhavsar, S. Veser, G., “Iron/Ceria-Based Carrier Materials for Chemical Looping Dry Reforming.” Prepr. Pap.-Am. Chem. Soc., Div. Energy Fuels. (2013).

Najera, M., Grace, H., Bhavsar, S., Veser, G., “CO2 Activation via Chemical Looping Dry Reforming.” 23rd Meeting of the North American Catalysis Society (NAM23). Louisville, KY. (2013).

Patil, M., Gottardi, R., Velankar, S.S., Little, S.R., “Carbon Nanotube Thin Film via Interfacial Film Climbing: A Potential Platform for Cell Growth.” BMES Annual Meeting. Seattle, WA. (2013).

Peng, S., Velankar, S.S., “Circuit model for microfluidic bubble generation under controlled pressure.” Microfluidics and Nanofluidics. 15(6). 797-805. (2013).

Pratyush Dayal, Olga Kuksenok, Amitabh Bhattacharya, Gavin A. Buxton, O. Berk Usta, Balazs A.C., “Modeling the Interaction of Active Cilia with Species in Solution: From Chemical Reagents to Microscopic Particles.” Artificial Cilia Jaap den Toonder and Patrick Onck, Eds., RSC, Chapter 4, 63-88. (2013).

Pritchard-Bell, A., Clermont, G., Gawel, S.P., Ho, T., Parker, R.S., “Zone-MPC for Normoglycemia in Critical Care." Diabetes Technology Meeting. San Francisco, CA. (2013).

Richardson T., Kumta P.N., Banerjee I., “Alginate encapsulation and differentiation of hESCs to pancreatic islet-like cells.” American Institute of Chemical Engineers (AIChE). San Francisco, CA. (2013).

Richardson T., Kumta P.N., Banerjee I., “Alginate encapsulation and differentiation of hESCs to pancreatic islet-like cells.” Biomedical Engineering Society Annual Fall Meeting. Seattle, WA. (2013).

Ritzmann, A.M., Muñoz-García, A.B., Pavone, M., Keith, J.A., Carter, E.A., “Ab Initio Evaluation of Oxygen Diffusivity in LaFeO3: The Role of Lanthanum Vacancies” MRS Comm. 3.

161–166. (2013).

Ritzmann, A.M., Pavone, M., Muñoz-García, A.B., Keith, J.A., Carter, E.A., “Ab Initio DFT+U Analysis of Oxygen Vacancy Formation and Migration in La1-xSrxFeO3-δ (x=0, 0.25 and 0.50).”

Chem. Mater. 25, 3011–3019. (2013).

Salib, I., Yong, X., Crabb, E.J., Moellers, N. M., McFarlin, G., Kuksenok, O., Balazs, A.C, “Harnessing Fluid-Driven Vesicles to Pick Up and Drop Off Janus Particles.” ACS Nano. 7. 1224– 1238. (2013).

Sehabiague, L., Basha, O. Morsi, B.I., “Recycling of Tail Gas in Fischer-Tropsch Bubble Column Slurry Reactor and its impact on the Coal-to-Liquid Process.” Proceedings of the Thirtieth Annual International Pittsburgh Coal Conference. Beijing, China. (2013).

186

Sehabiague, L., Basha, O.M., Morsi, B.I., “Recycling of Tail Gas in Fischer-Tropsch Bubble Column Slurry Reactor and its impact on the Coal-to-Liquid Process.” Thirtieth Annual International Pittsburgh Coal Conference. Beijing, China. (2013).

Sehabiague, L., Morsi, B.I., "Modeling and Simulating F-T Process in Slurry Bubble Column Reactors Using Different Kinetic Rate Expressions for Iron and Cobalt Catalysts." Proceedings of the 15th Balkan Mineral Processing Congress, Sozopol, Bulgaria. (2013).

Sehabiague, L., Morsi, B.I., “Hydrodynamic and Mass Transfer Characteristics in a Large-Scale Slurry Bubble Column Reactor for Gas Mixtures in Actual Fischer-Tropsch Cuts.” International Journal of Chemical Reactor Engineering, 11(1). 1–20. (2013).

Sehabiague, L., Morsi, B.I., “Modeling and Simulation of a Fischer-Tropsch Slurry Bubble Column Reactor Using Different Kinetic Rate Expressions for Iron and Cobalt Catalysts.”

International Journal of Chemical Reactor Engineering. 11(1). 1-22. (2013).

Shum, H., Tripathi, A, Yeomans, J.M., Balazs, A.C., “Active Ciliated Surfaces Excel Model Swimmers”, Langmuir, 29. 12770–12776. (2013).

Soh, L., Curry, J., Beckman, E.J., Zimmerman, J.B., “Effect of system conditions for biodiesel production via transesterifcation using carbon dioxide-nethanol mixtures in the presence of a hetero generous catalyst.” ACS Sust Chem Eng. 2(3). 387-395 (2013).

Surapathi, A., Chen, H., Marand, E., Johnson, J.K., “Gas Sorption Properties of ZwitterionFunctionalized Carbon Nanotubes.” Journal of Membrane Science. 429. 88–94. (2013).

Task, K. Banerjee, I., “Dynamics of cell cycle transition in human embryonic stem cells during endoderm specific differentiation.” American Institute of Chemical Engineers (AIChE). San Francisco, CA. (2013).

Task, K. Banerjee, I., “Dynamics of cell cycle transition in human embryonic stem cells during endoderm specific differentiation.” Biomedical Engineering Society Annual Fall Meeting. Seattle, WA. (2013).

Task, K., Kumta, P., Banerjee, I., “Correlating effects of gel microstructural features with specific differentiation patterning of embryonic stem cells.” American Institute of Chemical Engineers (AIChE). San Francisco, CA. (2013).

Task, K., Kumta, P., Banerjee, I., “Correlating effects of gel microstructural features with specific differentiation patterning of embryonic stem cells.” Biomedical Engineering Society Annual Fall Meeting. Seattle, WA. (2013).

Tripathi, A., Bhattacharya, A., Balazs, A.C., “Size selectivity in cilia-particle interactions: Mimicking the behavior of suspension feeders.” Langmuir, 29. 4616–4621. (2013).

Velankar, S., “Carbon Nanotube Thin Film via Interfacial Film-Climbing: A Potential Platform for Cell Growth.” BMES 2013 Annual Meeting. Seattle, WA. (2013).

Velankar, S., “Contact Force Measurement for Liquid-Solid Systems at Different Liquid Saturation States.” AIChE meeting. San Francisco, CA. (2013).

187

Velankar, S., “Improving thermoplastic foam stability in the molten state by interfaciallyadsorbed particles.” Society of Plastics Engineers - Annual Technical Meeting. Las Vegas, NV. (2013).

Veser, G. “Back to the Future: Chemical Looping Beyond Combustion.” AIChE Annual Meeting.

San Francisco, CA. (2013).

Veser, G., “Chemical Looping Beyond Combustion” World Congress on Chemical Engineering (WCCE9). Seoul, South Korea. (2013).

Vilkhovoy, M., Pritchard-Bell, A., Clermont, G., Parker, R.S., “Subcutaneous Insulin Absorption for Critically Ill Patients." CUR Conference of Research Experiences for Undergraduates Student Scholarship. Arlington, VA. (2013).

Vilkhovoy, M., Pritchard-Bell, A., Clermont, G., Parker, R.S., “Subcutaneous Insulin Absorption for Critically Ill Patients." AIChE Annual Meeting, San Francisco, CA. (2013).

Wang T., Mpourmpakis G., Lonergan W.W., Porosoff M.D., Vlachos D.G., Chen J.G., “Effect of Oxide Supports in Stabilizing Desirable Pt–Ni Bimetallic Structures for Hydrogenation and Reforming Reactions .” Phys. Chem.15. 12156-12164. (2013).

Wu, J., Zhao, S., J., Wu, J., Gao, D., “Sorting Short Fragments of Single-Stranded DNA with an Evolving Electric Double Layer,” J. Phys. Chem. B. 117. 8. 2267–2272. (2013).

Wu, Y., Bamgbade, B.A., Burgess, W.A., Enick, R.M., “Effect of Isomeric Structures of Branched Cyclic Hydrocarbons on Densities and Equation of State Predictions at Elevated Temperatures and Pressures.” Journal of Physical Chemistry B.. 117. 29. 8821-8830. (2013).

Yang, J., “Advanced Electron Microscopy of Heterogeneous Catalysis.” ACS, Indianapolis, IN. (2013).

Yong, X., Crabb, E.J., Moellers, N. M., Balazs, A.C., “Self-healing Vesicles Deposit Lipid-coated Janus Particles into Nanoscopic Trenches”, Langmuir, 29. 16066–16074. (2013).

Yong, X., Kuksenok, O, Matyjaszewski, K., Balazs, A.C., “Harnessing Interfacially-Active Nanorods to Regenerate Severed Polymer Gels” Nano Letts.,13. 6269–6274. (2013).

Yuan, P., Kuksenok, O., Gross, D.E., Balazs, A.C., Moore, J.S., Nuzzo, R.G., “A New UV Patternable Thin Film Chemistry for Shape and Functionally Versatile Self-Oscillating Gels.” Soft Matter. 9. 1231-1243. (2013).

Yue, W., Bamgbade, B.A., Baled, H., Enick, R.M., “Liquid Densities of Xylene Isomers and 2Methylnaphthalene at Temperatures to 523 K and Pressures to 265 MPa: Experimental Determination and Equation of State Modeling.” Industrial & Engineering Chemistry Research.

52. 33. 11732-11740. (2013).

Zhang, B., Adri, C., Duin, Johnson, J.K., “Modeling Chemical and Physical Interactions in CO2/Ionic Liquids With the Reaxff Force Field.” AIChE Annual Meeting. San Francisco. CA. (2013).

188

Zhang, B., Johnson, J.K., “Properties of Weakly Bound Molecular Oxygen on the Rutile TiO2(110) Surface from Density Functional Theory.” Journal of Physical Chemistry C. 117.

17151-17158. (2013).

Zhang, J.T., Velankar, S.S., “Vertical spreading of two-dimensional crystalline colloidal arrays.”

Journal of Materials Chemistry C. 1(38). 6099-6102. (2013).

Zhang, Z., Li, L., Yang, J.C., “Adhesion of Pt Nanoparticles Supported on gamma Al2O3 Single Crystal.” J. Phys. Chem. C. 117. 21407-21412. (2013).

Zhou B., Li L., Randall N.. “The surface tribological and mechanical behaviors of silicone-based hydrogel materials.” Conference Proceedings of the Society for Experimental Mechanics Series. 5.

149-153. (2013).

Zhou, F., Li, Z., Shenoy, G., Li, L., Liu, H., “Enhanced Room-Temperature Corrosion of Copper in the Presence of Graphene.” ACS Nano. 7(8). 6939-6947. (2013).

Zhou, G., Luo, L., Li, L., Ciston, J., Stach, E.A., Saidi, W.A., Yang, J.C., “In situ atomic scale visualization of oxide islanding during oxidation of Cu surfaces.” Chem Comm,. 49. 10862-10864.

(2013).

Zhu, Q., Fleck, C., Wissam A.S., McGaughey, J.H., Yang, J.C., “TFOx: A Versatile Kinetic Monte Carlo Program for Simulations of Island Growth in Three Dimensions.” Computational Material Science. 91. 293–302. (2013).

Department of Civil and Environmental Engineering Frias, C., Abad, J. D. (2013). “Mean and turbulent flow structure during the amalgamation process in fluvial bed forms” Water Resources Research, 49: 6548–6560.

Abad, J. D., Frias, C., Buscaglia, G., Garcia, M. (2013). “Modulation of the flow structure by progressive bedforms in the Kinoshita Meandering channel” Earth Surface Processes and Landforms, 38: 1612–1622.

Gutierrez, R., Abad, J. D., Parsons, D. R., Best, J. L. (2013) “Discrimination of bedforms scales using robust spline and wavelet transforms: methods and application to Synthetic Signals and the Parana River, Argentina” Journal of Geophysical Research-Earth-Surface, 118: 1400–1419.

Vidic, R., Brantley, S. L., Vandenbossche, J. M., Yoxtheimer, D., Abad, J. D. (2013). “Impact of Shale Gas Development on Regional Water Quality” Science, 340, 1235009, doi: 10.1126/science.1235009.

Catano, Y., Abad, J. D., Garcia, M. H. (2013). “Experimental and numerical study of the flow structure around two partially buried objects on a deformed bed” Journal of Hydraulic Engineering, 139 (3): 269-283.

189

Frias C., Abad J.D., Montoro H., Paredes J., Holguin C., Vizcarra J. (2013) "On the interaction of flow-morphodynamics of the Upper Amazon anabranching structures" 35th IAHR world congress, Chengdu, China, September, 2013.

Bonthius, C. M., Latrubesse, E. M., Abad, J. D., Stevaux, J. C., Filizola, N., Aquino, S. (2013) “Channel morphology and morphodynamics of the Madeira River in Brazil” 8th IAG International Conference on Geomorphology, Paris, France, August 2013.

Abad, J. D., Vizcarra, J., Paredes, J., Montoro, H., Frias, C., Holguin, C. (2013) “Morphodynamics of the Upper Peruvian Amazonian Rivers, Implications into Fluvial Transportation” First International Conference IDS2013 – Amazonia, July 17-19, Iquitos, Peru.

Frias C., Abad J.D., Montoro H., Paredes J., Holguin C., Vizcarra J. (2013) "Modelling the effect of sinuosity in modern anabranching structures of the Upper Amazon Basin" 10th International Conference on Fluvial Sedimentology, Leeds, UK. July 2013.

Gutierrez, R. R., Choi, M., and Abad, J. D. (2013). “Dynamics of meander train confluences” 8th Symposium on River, Coastal and Estuarine Morphodynamics, RCEM 2013. Santander, Spain, June 09-13.

Gutierrez, R. R. and Abad, J. D. (2013). “Conservation of meander dynamics, from cutoff to migration processes” 8th Symposium on River, Coastal and Estuarine Morphodynamics, RCEM 2013. Santander, Spain, June 09-13.

Gutierrez, R. R., Abad, J. D., Parsons and J. Best (2013). “Characterization of bedforms, application to the Parana River” 8th Symposium on River, Coastal and Estuarine Morphodynamics, RCEM 2013. Santander, Spain, June 09-13.

Frias C., Abad J.D., Montoro H., Paredes J., Holguin C., Vizcarra J. (2013) "Influence of the main channel sinuosity on the morphodynamics of the Upper Amazon anabranching structures" in 8th Symposium on River, Coastal and Estuarine Morphodynamics (RCEM), Santander, Spain, June, 09-13.

Frias C., Abad J.D., "On the turbulent flow structure of fluvial bedforms amalgamation processes" in 8th Symposium on River, Coastal and Estuarine Morphodynamics (RCEM), Santander, Spain, June 09-13.

Bonthius, C. M., Latrubesse, E. M., Abad, J. D., Stevaux, J. C., Filizola, N., Aquino, S. (2013).

“Morphodynamics of the Madeira River in Brazil: Analyses of channel morphology and flow structure in a threatened fluvial system” River Coastal and Estuarine Morphodynamics (RCEM), 2013, Santander, Spain, June 09-13.

Neal, A., Mendoza, A., Simon, C., Abad, J. D., Vidic, R., Yoxtheimer, D., Vastine, J., Wilderman, C., Brantley, S. (2013) “Using the NSF-funded Shale Network Database and Critical Zone Observatories to Assess Water Quality Concerns in Areas of Shale-Gas Development” AGU Science Policy Conference, Washington, DC, June 24-26.

Konsoer, K., Rhoads, B. L., Best, J., Langendoen, E., Ursic, M., Abad, J. D., Garcia, M. H. (2013). “Scales of form roughness on riverbanks with different riparian vegetation” AGU Fall

190

Meeting, San Francisco, USA, December 2013.

Rhoads, B. L., Konsoer, K. M., Best, J., Garcia, M. H., Abad, J. D. (2013). “Planform dynamics of a mixed bedrock-alluvial meandering river” AGU Fall Meeting, San Francisco, USA, December 2013.

Latrubesse, E., Bonthius, C., Abad, J. D., Stevaux, J., Filizola, N., Frias, C. E. (2013).

“Morphodynamics and anabranching patterns generated in the Madeira River, Brazil” AGU Fall Meeting, San Francisco, USA, December 2013.

Brantley, S., Yoxtheimer, D., Arjmand, S., Grieve, P., Vidic, R., Abad, J. D., Simon, C., Pollar, J. (2013). “Water resouce impacts during unconventional Shale Gas development: The Pennsylvania Experience” AGU Fall Meeting, San Francisco, USA, December 2013.

Abad, J. D., Frias, C., Langendoen, E., Best, J., Rhoads, B., Konsoer, K., Garcia, M. H. (2013).

“Bed forms modulating temporal peaks on near-bank shear stresses, the Wabash River case” AGU Fall Meeting, San Francisco, USA, December 2013.

Mendoza, A., Frias, C., Langendoen, E. J., Abad, J. D. (2013). “Bank erosion modulated by exposed roots from riparian vegetation in small gravel-bed streams” AGU Fall Meeting, San Francisco, USA, December 2013.

Frias, C., Mendoza, A., Dauer, K., Abad, J. D., Montoro, H., Paredes, J., Vizcarra, J. (2013).

“Study of the anabranch dynamics for different sinuosity stages in the Upper Amazon River basin” AGU Fall Meeting, San Francisco, USA, December 2013.

Dauer, K., Frias, C., Abad, J. D., Paredes, J., Vizcarra, J., Holguin, C., (2013). “How do morphodynamic signatures vary along the Ucayali, a large transitional river?” AGU Fall Meeting, San Francisco, USA, December 2013.

Arjmand, S., Abad, J. D., Brantley, S. (2013). “Assessment and design of water quality monitoring networks with respect to Shale gas activities in Pennsylvania” AGU Fall Meeting, San Francisco, USA, December 2013.

Langendoen, E. J., Abad, J. D., Motta, D., Frias, C., Wong, M., Barnes, B. J., Anderson, C. D., Garcia, M. H., MacDonald, T. E. (2013). “Designing and assessing restored meandering river planform using RVR Meander” AGU Fall Meeting, San Francisco, USA, December 2013.

Simon, C. A., Arjmand, S., Abad, J. D., Vidic, R. D., Brantley, S. L., Yoxtheimer, D. (2013) “Shale Gas Contamination – Water Quality Monitoring Network in the Tenmile Creek Watershed” 2013 Shale Network Workshop, State College, PA, USA. May 19-20.

Arjmand, S., Abad, J. D. (2013) “Groundwater Contamination Problems Associated with the Shale Gas in Pennsylvania” 2013 Shale Network Workshop, State College, PA, USA. May 19-20.

Arjmand, S.,Abad J. D. (2013) “Shallow Groundwater Contamination–Major Environmental Concerns associated with Unconventional Gas Drilling Activities” Pennsylvania Groundwater Symposium, Penn State University, State College, PA, USA, May 8.

Kyle J. Bibby, Susan L. Brantley, Danny D. Reible, Karl G. Linden, Paula J. Mouser, Kelvin B. Gregory, Brian R. Ellis, Radisav D. Vidic. “Suggested Reporting Parameters for Investigations of

191

Wastewater from Unconventional Shale Gas Extraction” Environmental Science and Technology.

47 (23) 13220-13221.

Arvind Murali Mohan, Angela Hartsock, Kyle Bibby, Richard Hammack, Radisav Vidic, Kelvin Gregory. “Microbial Community Changes in Hydraulic Fracturing Fluids and Produced Water from Shale Gas Extraction” Environmental Science and Technology. 47 (22) 13141-13150.

Kyle Bibby. “Metagenomic Identification of Viral Pathogens” Trends in Biotechnology, 2013, 31, (5) 275-279.

Kyle Bibby, Jordan Peccia. “Identification of Viral Pathogen Diversity in Sewage Sludge by Metagenome Analysis” Environmental Science and Technology. 2013, 47, (4), 1945-1951.

Kyle Bibby, Jordan Peccia. “Respiratory Species B and C Dominate the Adenovirus Population in Sewage Sludge” Environmental Science: Processes and Impacts. 2013, 215, (15), 336.

Hamid Rismani-Yazdi, Sarah M. Carver, Zhongtang Yu, Ann D. Christy, Kyle Bibby, Jordan Peccia, Olli H. Tuovinen. “Suppression of Methanogenesis in Cellulose-Fed Microbial Fuel Cells in Relation to Performance, Metabolite Formation, and Microbial Population” Bioresource Technology. 2013. 129:281-288 A. M. Kaynar, K. Bibby, E. Tutuncuoglu, S. Scott, A. Leme, S. D. Shapiro. “The Gut Microbiota as a Secondary Source of Inflammation in Smoking” Pittsburgh International Lung Conference.

Pittsburgh, PA. October 2013.

Dale, A.T., Lucena, A.F., Marriott, J., Borba, B.S., Schaeffer, R., Bilec, M.M. (2013). “Modeling Future Life-Cycle Environmental Impacts of Electricity Supplies in Brazil” Energies, 6 (7), 31823208.

Hottle, T., Bilec, M.M., Landis, A.E. (2013). “Cradle-to-Cradle Sustainability Assessments of Bio-based Polymers” Polymer Degradation and Stability, 98(9), 1898-1907.

Dale, A.T., Khanna, V., Vidic, R.D., Bilec, M.M. (2013). “Process Based Life-Life Cycle Assessment of Natural Gas from the Marcellus Shale” Environmental Science & Technology, 47(10), 5459–5466.

Deblois, J., Bilec, M.M., Schaefer, L.A. (2013). “Simulating Home Cooling Load Reductions for a Novel Opaque Roof Solar Chimney Configuration” Applied Energy, 112, 142-151. http://dx.doi.org/10.1016/j.apenergy.2013.05.084 Saunders, C.L., Landis, A.E., Mecca, L., Jones, A.K., Schaefer, L.A., Bilec, M.M. (2013).

“Analyzing the Practice of Life Cycle Assessment: Focus on the Building Sector” Journal of Industrial Ecology, 17(5), 777-788.

Ketchman, K. and Bilec, M.M. (2013). “Quantification of Particulate Matter from Construction Activities using a Life Cycle Approach” Journal of Construction and Engineering Management, 139(12) A4013007-1 to 10.

Thiel, C.L., Campion, N., Landis, A.E., Jones, A.K., Schaefer, L.S., Bilec, M.M. (2013). “A Materials Life Cycle Assessment of a Net-Zero Energy Building” Energies, 6(2), 1125-1141.

192

Collinge, W.O., Landis, A.E., Jones, A.K., Schaefer, L.A., Bilec, M.M. (2013). Indoor Environmental Quality Metrics in a Dynamic Life Cycle Assessment Framework for Whole Buildings” Buildings and the Environment, 62, 182-190.

Shrake, S.O., Bilec, M.M., Landis, A.E. (2013). “The application of a multi-faceted approach to evaluating and improving the life cycle environmental performance of service industries” Journal of Cleaner Production, 42, 263-276.

Collinge, W.C., Landis, A.E., Jones, A., Schaefer, L., Bilec, M.M. (2013). “A Dynamic Life Cycle Assessment: Framework and Application to an Institutional Building” International Journal of Life Cycle Assessment, 18(3), 538-552.

Deblois, J., Bilec, M.M., Schaefer, L.A. (2013) “Design and Zonal Building Information Modeling of a Roof Integrated Solar Chimney” Renewable Energy, 52(0), 241-250.

Saunders, C., Landis, A.E., Schaefer, L.A., Jones, A.K., Bilec, M.M. (2013). “Understanding Energy Models Results in the Context of a Building’s Lifetime: Focus on a High Performance Building” Conference Proceedings, International Symposium on Sustainable Systems and Technology, May 15-17, 2013, Cincinnati, Ohio.

Olinzock, M.O., Saunders, C.L., Landis, A.E., Schaefer, L.A., Jones, A.K., Bilec, M.M. (2013).

“Understanding the Perception and Use of Whole Building Life Cycle Assessments” Presentation, LCA XIII, September 30-October 3, 2013, Orlando, Florida.

Shen, T., Khanna, V., Landis, A.E., Bilec, M.M. (2013). “Comparison of Life Cycle Impact Assessment Methods: MDI as an Example” Poster, LCA XIII, September 30-October 3, 2013, Orlando, Florida.

Thiel, C., Shrake, S., Woods, N., Landis, A., Bilec, M.M. (2013). “Analyzing surgical techniques using LCA to inform environmentally sustainable changes in hospital operating rooms” International Congress on Sustainability Science and Engineering (ICOSSE), August 11-15, 2013, Cincinnati, Ohio.

Dale, A.T., Bilec, M.M. (2013). “A Model for Assessing Regional Life-Cycle Environmental Impacts of Future Energy and Water Supply Scenarios” Presentation, International Symposium on Sustainable Systems and Technology, May 15-17, 2013, Cincinnati, Ohio.

Saunders, C., Landis, A.E., Schaefer, L.A., Jones, A.K., Bilec, M.M. (2013). “Understanding Energy Models Results in the Context of a Building’s Lifetime: Focus on a High Performance Building” Presentation, International Symposium on Sustainable Systems and Technology, May 15-17, 2013, Cincinnati, Ohio.

Olinzock, M., Saunders, C.L., Landis, A.E., Schaefer, L.A., Jones, A.K., Bilec, M.M. (2013).

“Results of a National Survey Regarding Whole-Building Life Cycle Assessments Among the Architecture, Engineering, and Construction Community” Presentation, International Symposium on Sustainable Systems and Technology, May 15-17, 2013, Cincinnati, Ohio.

Collinge, W.O., Landis, A.E., Jones, A.K., Schaefer, L.A., Bilec, M.M. (2013). “Synergistic Scenarios for Indoor Health and Productivity in Whole-Building Life Cycle Assessment” Presentation, International Symposium on Sustainable Systems and Technology, May 15-17, 2013, Cincinnati, Ohio.

193

Ketchman, K., Bilec, M.M. (2013). “Quantification of PM10 from Construction Activities Using a Life Cycle Approach” Poster, International Symposium on Sustainable Systems and Technology, May 15-17, 2013, Cincinnati, Ohio.

Thiel,C.L., Shrake, S.O., Huddleston, M., Landis, A.E., Woods, N., Bilec, M.M. (2013).

“Environmental Impacts of Minimally Invasive Surgery” Poster, International Symposium on Sustainable Systems and Technology, May 15-17, 2013, Cincinnati, Ohio.

Woods, N., Bilec, M.M., Landis, A.E., Campion, N., Thiel, C. (2013). Presentation, “Improving Environmental Performance of the Operating Room” CleanMed, April 24-26, 2013, Boston, Massachusetts.

Thiel, C.L., Bilec, M.M., Needy, K.L., Ries, R.J. (2013). “Green Building Design and Construction: Greening the Indoor Environment” Presentation, Engineering Sustainability 2013, April 7-9, 2013, Pittsburgh, Pennsylvania.

Banawi, A.A., Bilec, M.M. (2013). “Applying Lean, Green, and Six- Sigma Framework to Improve Exterior Construction Processes in Saudi-Arabia” Poster, Engineering Sustainability 2013, April 7-9, 2013, Pittsburgh, Pennsylvania.

Collinge, W., A. Landis, A. Jones, L. Schaefer and M. Bilec (2013). “Indoor Environmental Quality in a Dynamic Life Cycle Assessment Framework for Buildings: Case Study of the Mascaro Center for Sustainable Innovation” Engineering Sustainability 2013, Pittsburgh, PA, April 2013.

Thiel, C.L., Campion, N., Landis, A.E., Bilec, M.M. (2013).“Net-Zero Energy Building Material Perspective: A Life Cycle Assessment” Poster, Engineering Sustainability 2013, April 7-9, 2013, Pittsburgh, Pennsylvania.

Dale, A.T., Bilec, M.M. (2013). “Rapid Assessment of Environmental Impacts of Regional Energy & Water Supply Scenarios” Poster, Engineering Sustainability 2013, April 7-9, 2013, Pittsburgh, Pennsylvania.

B. Notghi and J.C. Brigham, “Optimal Nondestructive Test Design for Maximum Sensitivity and Minimal Redundancy for Applications in Material Characterization” Smart Materials and Structures, 22, 12, December, 125036-125048.

D. Dutta, K.-W. Lee, R.A. Allen, Y. Wang, J.C. Brigham, and K. Kim (2013) “Non-Invasive Assessment of Elastic Modulus of Arterial Constructs During Cell Culture Using Ultrasound Elasticity Imaging” Ultrasound in Medicine and Biology, 39, 11, November, 2103-2115.

J. Wu, Y. Wang, M.A. Simon, M.S. Sacks, and J.C. Brigham, Editor’s Choice Article and Most Read Article in 2013, “A New Computational Framework for Anatomically Consistent 3D Statistical Shape Analysis with Clinical Imaging Applications” Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization, 1, 1, February, 13-27.

S. Wang and J.C. Brigham, “An Adjoint Based Approach for Optimal Design of Morphing SMP” ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, September.

194

O. Balogun, C. Mo, A.K. Mazher, and J.C. Brigham, “Three-Dimensional Numerical Simulation of Thermomechanical Constitutive Model for Shape Memory Polymers with Application to Morphing Wing Skin” ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, September.

Invited Paper, J.C. Brigham, B. Notghi, and S. Wang, “Methods in Computational Inverse Mechanics for the Advancement of Smart Structure Technologies” ASCE 2013 Structures Congress, Pittsburgh, PA, May. J.M. Vandenbossche, A.T. Iannacchione, and J.C. Brigham, “The Marcellus Shale Gas Play and the Gas Migration/Stray Gas Problem” SME 2013 Symposium on Environmental Considerations in Energy Production, Charleston, WV, April.

M. Ahmadpoor, G.A. Banyay, S. Mazumdar, A. Jana, M.L Kimber, and J.C. Brigham, “PODBased Model Reduction toward Efficient Simulation of Flow in Nuclear Reactor Components” 66th Annual Meeting of the APS Division of Fluid Dynamics, Pittsburgh, PA, November.

M. Ahmadpoor and J.C. Brigham, “An Approach for Adaptive Generation of Reduced-Order Models for Applications in Nondestructive Evalution” Conference of the Engineering Mechanics Institute, Evanston, IL, August.

M. Wang and J.C. Brigham, “An Adaptive Damage Characterization Strategy Utilizing MultiObjective Optimization” Conference of the Engineering Mechanics Institute, Evanston, IL, August.

B. Notghi and J.C. Brigham, “A Generalized Approach for Optimal Nondestructive Test Design Incorporating Uncertainty” Conference of the Engineering Mechanics Institute, Evanston, IL, August.

J. Wu and J.C. Brigham, “An Investigation of Shape Analysis Methods for Assessment of OrganLevel Functional Changes in the Human Right Ventricle” 12th US National Congress on Computational Mechanics, Raleigh, NC, July.

S. Wang and J.C. Brigham, “Computationally Efficient Optimal Design of Localized Activation and Actuation for Morphing SMP Structures Using the Adjoint Method” 12th US National Congress on Computational Mechanics, Raleigh, NC, July.

J. Wu and J.C. Brigham, “A New Approach with Independent Component Analysis for 3D Shape Analysis Applied to the Human Right Ventricle” 12th US National Congress on Computational Mechanics, Raleigh, NC, July.

M. Ahmadpoor and J.C. Brigham, “An Adaptive Approach for Generation of Reduced-Order Models for Computational Inverse Mechanics Strategies” 12th US National Congress on Computational Mechanics, Raleigh, NC, July.

O.C. Green, J.C. Brigham, and W.J. Anderst, “Patient-Specific Computational Analysis of the Cervical Spine Towards Inverse Soft Tissue Characterization” 12th US National Congress on Computational Mechanics, Raleigh, NC, July.

M. Ahmadpoor, G.A. Banyay, S. Mazumdar, A. Jana, M.L Kimber, and J.C. Brigham, “ReducedOrder Modeling for Numerical Representation of Fluid Flow Toward Efficient Simulation of High

195

Temperature Reactor Components” 12th US National Congress on Computational Mechanics, Raleigh, NC, July.

J. Wu, Y. Wang, M.A. Simon, and J.C. Brigham, “A Comparison of Statistical Shape Analysis Methods to Assess Right Ventricular Behavior” 11th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Salt Lake City, Utah, April.

J. Wu and J.C. Brigham, “Computational Techniques for Analysis of Organ-Level Shape and Kinematics,” Chapter 13 in Image-based Geometric Modeling and Mesh Generation, Editor: Yongjie (Jessica) Zhang, Springer.

Budny, D.D., Lund, L., Khanna, R., “Designing Service Learning Projects for Freshman Engineering Students” International Journal of Engineering Pedagogy, iJEP, Vol 3: Special Issue: TaT'2012, February 2013.

Budny, D.D., Paul, C., Newborg, B., “Designing a Positive Involvement for Parents in the Freshman Engineering Experience” 16th International Conference on Interactive Collaborative Learning and 42st International Conference on Engineering Pedagogy, Kazan, Russia• 25-27 September 2013.

Budny, D.D., Paul, C., Newborg, B., “Involving Parents in the First Year Experience” 5th First Year Engineering Experience Conference, Pittsburgh, PA• August 8 – 9, 2013.

Budny, D.D., Paul, C., Newborg, B., “Educating Freshman Engineering Parents, Improving Freshman Engineering Retention” Proceedings 2013 North Central Sectional Meeting of the American Society for Engineering Education, Ohio State University, Columbus, Ohio, April 5-6, 2013.

Dan Budny, “Designing and Creating a Set of New Lab Experiments for a Traditional Fluid Mechanics Course in Civil Engineering” 66th Annual American Physical Society - Division of Fluid Dynamics Meeting, Pittsburgh, PA, Nov 24-26, 2013.

Dan Budny, International Senior Design Service Learning Project: “Creating a Water System for Kuna Nega in Panama City, Panama” 66th Annual American Physical Society - Division of Fluid Dynamics Meeting, Pittsburgh, PA, Nov 24-26, 2013.

Budny, D.D., Introduction to Engineering, Stipes Publishing Co., Champaign, Ill, Fourteenth edition, 2013, pp.778.

Budny, D.D., Introduction to EXCEL, Stipes Publishing Co., Champaign, Ill, Second Edition, 2013, pp.200.Budny, D.D., Introduction to EXCELL, Stipes Publishing Co., Champaign, Ill, First Edition, 2012, pp.200.

Lecampion B, Bunger AP, Kear J, Quesada D. 2013. “Interface debonding driven by fluid injection in a cased and cemented wellbore: Modeling and experiments” International Journal of Greenhouse Gas Control, 18:208-223.

Bunger AP, Menand T, Cruden AR, Zhang X, Halls H. 2013. “Analytical predictions for a natural spacing within dyke swarms” Earth and Planetary Science Letters, 375:270-279.

196

Bunger AP, Gordeliy E, Detournay E. 2013. “Comparison between laboratory experiments and coupled simulations of saucer-shaped hydraulic fractures in homogeneous brittle-elastic solids”.Journal of the Mechanics and Physics of Solids, 61(7):1636–1654.

Bunger AP. 2013. “Analysis of the Power Input Needed to Propagate Multiple Hydraulic Fractures” International Journal of Solids and Structures, 50:1538-1549 Dewhurst DN, Bunger AP, Josh M, Sarout J, Delle Piane C, Esteban L, Clennell MB. 2013.

“Mechanics, Physics, Chemistry and Shale Properties” Proceedings 47th US Rock Mechanics/Geomechanics Symposium, San Francisco, CA, USA, June 23-26, 2013. Paper ARMA 13-151.

Detournay C, Bunger AP, Wu B. 2013. “Modeling the Impact of Drilling Fluid Salinity on Wellbore Stability using FLAC” Proceedings 3rd International FLAC/DEM Symposium, Hangzhou, China, 22-24 October 2013.

Bunger AP, Jeffrey RG, Zhang X. 2013. “Constraints on Simultaneous Growth of Hydraulic Fractures from Multiple Perforation Clusters in Horizontal Wells” SPE Hydraulic Fracturing Technology Conference, The Woodlands, Texas, USA, February 4-6, 2013, SPE 163860.

Kear J, White J, Bunger AP, Jeffrey RG, Hessami M-A. 2013. “Three Dimensional Forms of Closely-Spaced Hydraulic Fractures” In: Effective and Sustainable Hydraulic Fracturing. AP Bunger, J McLennan and R Jeffrey (eds.), ISBN 978-953-51-1137-5, (Intech), Chapter 34.

Dyskin AV, Pasternak E, Bunger AP, Kear J. 2013. “Blue Shift in the Spectrum of Arrival Times of Acoustic Signals Emitted during Laboratory Hydraulic Fracturing” In: Effective and Sustainable Hydraulic Fracturing. AP Bunger, J McLennan and R Jeffrey (eds.), ISBN 978-95351-1137-5, (Intech), Chapter 22.

Lecampion B, Peirce AP, Detournay E, Zhang X, Chen Z, Bunger AP, Detournay C, Napier J, Abbas S, Garagash D, Cundall P. 2013. “The Impact of the Near-Tip Logic on the Accuracy and Convergence Rate of Hydraulic Fracture Simulators Compared to Reference Solutions” In: Effective and Sustainable Hydraulic Fracturing. AP Bunger, J McLennan and R Jeffrey (eds.), ISBN 978-953-51-1137-5, (Intech), Chapter 43.

Wu B, Zhang X, Bunger AP, Jeffrey RG. 2013. “An Efficient and Accurate Approach for Studying the Heat Extraction from Multiple Recharge and Discharge Wells” In: Effective and Sustainable Hydraulic Fracturing. AP Bunger, J McLennan and R Jeffrey (eds.), ISBN 978-95351-1137-5, (Intech), Chapter 47.

States, S.,J., Cyprych, G., Stoner, M., Wydra, F., Kuchta, J., Monnell, J., and Casson, L.W., “Marcellus Shale Drilling: Effects on Brominated THMs in Drinking Water”, Journal AWWA, Vol. 105, No. 8, pp. E432-E448, August 2013.

States, S., Cyprych, G., and Casson, L., “Impacts from Flowback and Produced Water on Water Quality and Disinfection Byproducts” Proceedings of the AWWA Annual Conference and Exposition, Denver, Colorado, June 9-13, 2013.

Soltani A., Harries, K.A. and Shahrooz B.M. 2013 “Crack Opening Behavior of Concrete Reinforced with High Strength Reinforcing Steel” International Journal of Concrete Structures and Materials Vol.7, No.4, pp.253–264.

197

Wang W., Dai J-G. and Harries, K.A. 2013 “Intermediate Crack-Induced De-bonding in RC Beams Externally Strengthened with Pre-stressed FRP Laminates” Journal of Reinforced Plastics and Composites, Vol. 32, No. 23, pp 1842-1857.

Harries, K.A., Holford, A. and Kasan, J. 2013 “Demonstration of Fiber Optic Instrumentation System for Pre-stressed Concrete Bridge Elements” ASCE Journal of Performance of Constructed Facilities Vol. 27, No. 6, pp 785–795.

Kim, Y.J., Hossain, M., and Harries, K.A. 2013 “CFRP-strengthening of timber beams recovered from a 32-year old quonset: element to system level tests” Engineering Structures Vol. 57, pp 213-221.

Kim, Y. and Harries, K.A. 2013 “Statistical Characteristics of Reinforced Concrete Beams Strengthened with FRP Sheets” ASCE Journal of Composites for Construction, Vol. 17, No. 3, pp 357-370.

Kasan J., and Harries, K.A., 2013 “Analysis of Eccentrically Loaded Adjacent Box Girders” ASCE Journal of Bridge Engineering, Vol. 18, No.1, pp 15-25.

Briere V., Harries, K.A., Kasan, J. and Hager, C. 2013 “Dilation Behavior of Seven-Wire Prestressing Strand – The Hoyer Effect” Journal of Construction and Building Materials, Vol 40, pp 650-658.

Wang, W., Dai, J-G. and Harries, K.A., 2013 “Performance evaluation of RC beams strengthened with an externally bonded FRP system under simulated vehicles loads” ASCE Journal of Bridge Engineering Vol. 18, No.1, pp 76-82.

Zhang Y., Harries, K.A. and Yuan, W. 2013 “Experimental and numerical investigation of the seismic performance of hollow rectangular bridge piers constructed with and without steel fiber reinforced concrete” Engineering Structures Vol. 48, pp 255-265.

Mohammadi, T., Wan, B. and Harries, K.A. 2013. “Finite Element Analysis of FRP Debonding Failure at the Tip of Flexural Crack in Concrete Beam” Proceedings of the 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), Melbourne, December 2013 Cardoso, D.T.g, Harries, K.A. and Batista, E. 2013. “Behaviour of Pultruded GFRP Tubes Subject to Concentric Compression” Proceedings of Advanced Composites in Construction (ACIC2013), Belfast, September 2013. KEYNOTE PAPER Keenan, P.g and Harries, K.A. 2013. “Splices between external CFRP and internal reinforcing steel” Proceedings of the 11th International Symposium on Fiber Reinforced Polymer for Reinforced Concrete Structures (FRPRCS-11), Guimarães, Portugal, June 2013.

Mohammadi, T., Wan, B. and Harries, K.A. 2013 “Intermediate Crack Debonding Model of FRP Strengthened Concrete Beams Using XFEM” 2013 SIMULIA Community Conference, Vienna, May 2013 Eells, P.u, Pagliassotti, M. u, Brown, K. u, Nites, M. u, Stein, A. u, Zimmerman, C. u, Richard, M. g, Sharma, B. p and Harries, K.A. 2013. “Design of a Rapidly Deployable Bamboo Gridshell

198

Structure” 14th International Conference Non-conventional Materials and Technologies (ICNOCMAT 2013), João Pessoa, Brazil. March 2013.

Harries, K.A., Holford, A. and Stevens, D. 2013. “Demonstration of Fiber Optic Instrumentation System for Prestressed Concrete Bridge Elements” Proceedings of the 30th International Bridge Conference, Pittsburgh, June 2013.

Richard, M.J., Sharma, B. and Harries, K.A. 2013. “Bamboo Structures as Teaching Tool for Sustainable and Global Thinking” Proceedings of the Engineering Sustainability 2013 Conference, Pittsburgh, April 2011 Iannacchione, A., Keener, M., Mignogna, L., Bucha, B., Matyus, J., and Means, B., “The Interaction of Unique Geology and Retreat Room-and-Pillar Mining on Overburden Barrier Performance at the Grove No. 1 Mine” 32nd International Conference on Ground Control in Mining, Morgantown, WV, July 30-Aug. 1, 2013, pp. 196-201.

Iannacchione, A., Mignogna, L., Keener, M., Bucha, B., Winter, J., and Means, B., “Influence of Mine Layout, Mining Method, and Geology on Down-Dip Coal Barrier Performance at the Solar No. 7 and Solar No. 10 Mines” 32nd International Conference on Ground Control in Mining, Morgantown, WV, July 30-Aug. 1, 2013, pp. 189-195.

A. Iannacchione, J. Vandenbossche, and D. Janssen, “Experiments to Better Understand Pennsylvania’s Gas Migration Problem” Am. Assoc. of Petroleum Geologist Annual Meeting, Pittsburgh, PA, May 20-22, 2013, 2 p.

A. Iannacchione, D. Bain, M, Keener, and C. Nealen, “Preliminary Assessment of Factors Affecting Springs Undermined by Longwall Mines in Pennsylvania” in Environmental Considerations in Energy Production, SME Special Publication, ed. J. Craynon, Charleston, WV, April 15-19, 2013, pp. 336-346.

A.T. Iannacchione, N.E. Iannacchione, and M. Keener, “Selected Factors Affecting Longwall Mine Layouts in the Pittsburgh Coalbed of Southwestern Pennsylvania” SME Annual Meeting, Preprint 13-151, Denver, CO, Feb. 24-27, 2013, 7 p.

J. Vandenbossche, A. Iannacchione, and J. Brigham, “The Marcellus Shale Gas Play and the Gas Migration/Stray Gas Problem” in Environmental Considerations in Energy Production, SME Special Publication, ed. J. Craynon, Charleston, WV, April 15-19, 2013, pp. 137-139.

Van Zyl, D., Iannacchione, A., Craynon, J. and Sarver, E., “Mining and SD: Implementation of Undergraduate and Graduate Courses at Four Universities” 6th International Conference on Sustainable Development in the Minerals Industry, Milos, Greece, June 30 to July 3, 2013.

Zaimes, G.G. and Khanna, V. (2103) “Environmental sustainability of emerging algal biofuels: A comparative life cycle evaluation of algal biodiesel and renewable diesel” Environmental Progress & Sustainable Energy, 32(4): 926-936.

Soratana, K., Khanna, V., and Landis, A. (2013) “Re-envisioning the Renewable Fuel Standard to minimize unintended consequences: a comparison of microalgal diesel with other biodiesels” Applied Energy, 112, 194-204.

199

Zaimes, G.G. and Khanna, V. (2013) “Environmental life cycle evaluation of microalgal biomass production pathways” Biotechnology for Biofuels, 6:88.

Dale, A., Khanna, V., Vidic, R. and Bilec, M. “Process Based Life-Cycle Assessment of Natural Gas from the Marcellus Shale” Environmental Science & Technology, 47(10): 5459-5466, 2013.

Landis, A.E., Harden, C.L., Rasutis, D., Soratana, K., Zaimes, G.G., and Khanna, V. “Sustainability assessment of biofuels and related policies” Association for the Advancement of Industrial Crops (AAIC) Conference, Washington DC, October 12-16, 2013.

Zaimes, G.G., Kaminsky, K. and Khanna, V. “Environmental life cycle evaluation of fast pyrolysis derived drop-in-replacement biofuels” International Conference on Life Cycle Assessment, Orlando, FL, September 30-October 3, 2013.

Vendries, J.A., Hawkins, T.R., Khanna, V. and Marriott, J. “Improving Input-Output models for life cycle assessment by increasing sector resolution and tracking physical flows” International Conference on Life Cycle Assessment, Orlando, FL, September 30-October 3, 2013.

Vendries, J.A., Marriott, J., Hawkins, T.R., Khanna, V. and Matthews, H.S. “Disaggregating the power generation sector for Input-Output life-cycle assessment” International Congress on Sustainability Science and Engineering, Cincinnati, OH, August 11-15, 2013.

Harden, C.L., Zaimes, G.G., Soratana, K., Antaya, C.L., Rasutis, D., Khanna, V. & Landis, A.E. “Environmental impacts of US biofuel policies evaluated via Life Cycle approaches” International Congress on Sustainability Science and Engineering, Cincinnati, OH, August 11-15, 2013.

Chopra, S.S. and Khanna, V. “Understanding resilience in economic networks: Implications for critical infrastructure” International Symposium on Sustainable Systems and Technology, Cincinnati, OH, May 15-17, 2013.

Zaimes, G.G. and Khanna, V. “The role of ecological goods and services in microalgal biofuel production: A life cycle thermodynamic view” International Symposium on Sustainable Systems and Technology, Cincinnati, OH, May 15-17, 2013.

Vendries, J.A., Marriott, J., Hawkins, T.R., Khanna, V. and Matthews, H.S. “Disaggregation of the power generation sector for Input-Output life cycle assessment” International Symposium on Sustainable Systems and Technology, Cincinnati, OH, May 15-17, 2013.

Zaimes, G.G., Borkowski, M.G., and Khanna, V. “Life-cycle Environmental Impacts of Biofuels and Coproducts”. Biofuels and Biorefineries- Recent Developments, Springer Verlang GmbH, 2013.

Luo, X., X. Liang, and H.R. McCarthy, “VIC+ for Water-limited Conditions: A Study of Biological and Hydrological Processes and Their Interactions in Soil-Plant-Atmosphere Continuum” Water Resour. Res., 49, doi:10.1002/2012WR012851 (22 pages), 2013.

Davis, T.W. and X. Liang, “The Potential Use of Soil Moisture Sensors for Observing Hydraulic Redistribution Characteristics” J. of Water Resour. & Hydraulic Eng., 2(3), 84-91, 2013.

Navarro, M., T.W. Davis, Y. Liang, and X. Liang, “A study of long-term WSN deployment for environmental monitoring” 2013 IEEE 24th Annual Internal Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC), 2098-2102, 2013.

200

Salas, D., and X. Liang “ An introduction to multi-scale Kalman smoother-based framework and its application to data assimilation” in Land Surface Observation, Modeling and Data Assimilation, Edited by S. Liang, X. Li, and X. Xie, p.275-334, 2013.

Jeen-Shang Lin, Yaneng Zhou “Can scratch tests give fracture toughness?” Engineering Fracture Mechanics, 109, 161-168, 2013.

Yaneng Zhou, Jeen-Shang Lin, “On the critical failure mode transition depth for rock cutting” International Journal of Rock Mechanics and Mining Sciences, 62, 131-137, 2013 Yaneng Zhou, Jeen-Shang Lin, “Modeling Fracture of Quasibrittle Materials: A Comparative Study” 47th US Rock Mechanics/Geomechanics Symposium, 2013.

Jeen-Shang Lin, “A personal perspective on the Discontinuous Deformation Analysis, Frontiers of Discontinuous Numerical Methods and Practical Simulations in Engineering and Disaster Prevention” CRC press, 2013 Magalotti M. “Using Traffic Impact Fees to Fund Alternative Transportation Projects and Impact Modal Choice in Urban Areas” Presented at the December 12, 2013 Transportation Engineering and Safety Conference Pennsylvania State University.

Pistone, E., Li, K., and Rizzo, P. “Noncontact Monitoring of Immersed Plates by means of Laserinduced Ultrasounds” Int. Journal of Structural Health Monitoring, September-November, 12, 549-565, 2013.

Cai, L., Rizzo, P., and Al-Nazer, L. “On the Coupling Mechanism between Nonlinear Solitary Waves and Slender Beams” International Journal of Solids and Structures, 50, 4173-4183, 2013.

Cai, L., Yang, J., Rizzo, P., Ni, X., and Daraio, C. “Propagation of Highly Nonlinear Solitary Waves in a Curved Granular Chain” Granular Matters, 15(3), 357-366, 2013.

Lanza di Scalea, F., Rizzo, P., Salamone, S., Bartoli, I., and Al-Nazer, L. (2013). “Ultrasonic Tomography for Three-Dimensional Imaging of Internal Rail Flaws” Transportation Research Record, Journal of the Transportation Research Board, Vol. 2374, 162-168, DOI 10.3141/237419, 2013.

Ni, X., Cai, L., and Rizzo, P. “A Comparative Study on Three Different Transducers for the Measurements of Nonlinear Solitary Waves” Sensors, special issue: Piezoelectric Sensors and Actuators, 13, 1231-1246, 2013.

Zhu, X., and Rizzo, P. “Guided Waves for the Health Monitoring of Sign Support Structures Under Varying Environmental Conditions” Structural Control and Health Monitoring, 20(2), 3652, 2013.

Bagheri, A, Li, K., and Rizzo, P. “Reference-free damage detection by means of wavelet transform and empirical mode decomposition applied to Lamb waves” Journal of Intelligent material Systems and Structures, 24(2), 194-208, 2013.

Berhanu, B., Rizzo, P., and Ochs, M. “Highly Nonlinear Solitary Waves for the Assessment of Dental Implant Mobility” ASME J. Applied Mechanics, 80, 011028, 2013.

201

Pistone, E., Bagheri, A., Li, K., and Rizzo, P. “Advancements on the Inspection of Underwater Plates by Means Of Guided Waves” Proc. of the 9th Int. Workshop on Structural Health Monitoring 2013, Stanford University, California, 2013.

Z. Wang, S. Chen, G. Lederman, F. Cerda, J. Bielak, J. H.Garrett, P. Rizzo and J. Kovačević “Comparison of Sparse Representation and Fourier Discriminant Methods: Damage Location Classification in Indirect Lab-scale Bridge Structural Health Monitoring” Structures 2013 Congress, May 2-4, Pittsburgh, PA, USA, 2013.

Pistone, E., Bagheri, A., and Rizzo, P. “Signal processing for the smart inspection of underwater plates” 6th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART2013), June 24 - 26, Torino, Italy, 2013.

C. L. Antaya, P. Rizzo, M. Bilec and A. E. Landis “Incorporating Sustainability into the Civil Engineering curriculum via cross course collaborations” 120th ASEE Annual Conference & Exposition, June 23 - 26, Atlanta, Georgia, 2013.

Siheng Chen, Fernando Cerda, Jia Guo, Joel B. Harley, Qing Shi, P. Rizzo, Jacobo Bielak, James H. Garrett and Jelena Kovacevic (2013). “Multiresolution Classification with Semi-Supervised Learning for Indirect Bridge Structure Health Monitoring” ICASSP 2013, May 26-31, Vancouver, Canada, pp. 3412–3416, 2013.

Cai, L., Ni, X., and Rizzo, P. “Design of alternative sensors for NDE/SHM applications based on highly nonlinear solitary waves” Proc. SPIE 8692, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2013, 869226 2013.

Pistone, E., Bagheri, A., Li, K., Rizzo, P “Signal processing for the inspection of immersed structures” Proc. SPIE 8695, Health Monitoring of Structural and Biological Systems 2013, 86951A, 2013.

Rizzo, P. “NDE/SHM of Underwater Structures: a Review” 4th CIMTEC Intl. Conf. on Smart Materials and Structures Systems, Montecatini Terme, Italy, June 2012, Advances in Science and Technology Vol. 83,(2013)pp208-216, Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AST.83.208, 2013.

Lanza di Scalea, F., Rizzo, P., Salamone, S., Bartoli, I., and Al-Nazer, L. “Ultrasonic Tomography for Three-Dimensional Imaging of Internal Rail Flaws: Proof-of principle Numerical Simulations” 2013 TRB Conference, Washington, 13-16 January 2013.

Advances in Science and Technology, Embodying Intelligence in Structures and Integrated Systems, Vol. 83, Edited by Pietro Vincenzini, Fabio Casciati and Piervincenzo Rizzo.

Rizzo, P. “Acoustic Emission of Composites: A Compilation of Different Techniques and Analyses” Ch. 9, pp. 273-298, in Smart Composites: Mechanics and Design, Editors: Rani ElHajjar, Valeria La Saponara, and Anastasia Muliana. CRC Press, 23/Dec/2013, 430 pages, 2013.

Vallejo, L.E., Shettima, M., and Alaasmi, A. (2013). “Unconfined compressive strength of brittle material containing multiple cracks” International Journal of Geotechnical Engineering, Vol. 7, No. 3, pp. 318-322.

202

Gutierrez, J. J., and Vallejo, L.E. (2013). “Laboratory experiments on the hydraulic conductivity of sands with dispersed rock particles” Geotechnical and Geological Engineering, Vol. 31, No. 4, pp. 1405-1410.

Vallejo, L.E., and Kutschke, W. G. (2013) “Fragmentation due to dessiccation and shallow failures in clay slopes” Geo-Congress 2013, ASCE, Geotechnical Special Publication No. 231 pp.

772-781.

Kutschke, W. G., and Vallejo, L.E. (2013) “A new stability number for vertical cuts in stiff clays” Geo-Congress 2013, ASCE, Geotechnical Special Publication No. 231, pp. 1270-1279.

Vallejo, L.E., Lobo-Guerrero, S., Seminsky, L.F., and Caicedo, B. (2013) “The reinforcement of soils by dispersed oversized particles” Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris, France, Vol. 3, pp. 2617-2620.

Caicedo, B., Ocampo, M., and Vallejo, L.E. (2013) “Modelling crushing of granular materials as a poly-dispersed mixture” Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris, France, Vol. 2, pp. 1003-1006.

Vallejo, L.E. (2013). “Capillary rise in pores with rough walls” Proceedings of the 1st Panamerican Conference on Unsaturated Soils, Cartagena, Colombia, pp. 271-276.

Vallejo, L.E. (2013). “Using fracture mechanics theory to evaluate the unconfined compressive strength of unsaturated fissured clays” Proceedings of the 1st Panamerican Conference on Unsaturated Soils, Cartagena, Colombia, pp. 377-382.

Vallejo, L.E. (2013). “Fractal evaluation of the fragmentation of clays due to desiccation” Proceedings of the 1st Panamerican Conference on Unsaturated Soils, Cartagena, Colombia, pp. 383-387.

Vesga, L.F., and Vallejo, L.E. (2013). “Critical combination of tensile and shear stresses causing the crack propagation path in brittle clays subjected to uniaxial compression” Proceedings of the 1st Panamerican Conference on Unsaturated Soils, Cartagena, Colombia, pp. 389-395.

Vesga, L.F., and Vallejo, L.E. (2013). “Crack propagation and treshold strength of fissured clays subjected to cyclic loading” Proceedings of the 1st Panamerican Conference on Unsaturated Soils, Cartagena, Colombia, pp. 397-402.

Li, Z., and J.M. Vandenbossche. (2013) "Redefining the Failure Mode for Thin and Ultra-thin Whitetopping with a 1.8- x 1.8-m (6- x 6-ft) Joint Spacing" Transportation Research Record: Journal of Transportation Research Board, Transportation Research Board of the National Academics, Washington, DC, No.2368, Vol.3, 2013: 133-144.

Vandenbossche, J.M., N. Dufalla, and Z. Li. (2013) "Revised Thin and Ultra-Thin Bonded Whitetopping Design Procedure" Transportation Research Record: Journal of Transportation Research Board, Transportation Research Board of the National Academics, Washington, DC, Vol.3, 2013: 145-153.

Vidic, R., S.L. Brantley, J.M. Vandenbossche, D. Yoxtheimer, J.D. Abad, “Impact of Shale Gas Development on Regional Water Quality” Science, 340, 1235009, doi:10.1126/science.1235009, 2013.

203

He, C., Li, M., Liu, W., Barbot, E. and Vidic, R.D. “Kinetics and Equilibrium of Barium and Strontium Sulfate Formation in Marcellus Shale Flowback Water” Journal of Environmental Engineering, 86, 567-580, 2013.

Murali Mohan, A., Hartsock, A., Bibby, K.J, Hammack, R.C., Vidic, R.D. and Gregory, K.B. “Microbial Community Changes in Hydraulic Fracturing Fluids and Produced Water from Shale Gas Extraction” Environmental Science & Technology, 47:22, 13141-1350, 2013.

Bibby, K.J., Brantley, S.L., Reible, D.D., Linden, K.G., Mouser, P.J., Gregory. K.B., Ellis, B.R. and Vidic, R.D. “Suggested Reporting Parameters for Investigations of Wastewater from Unconventional Shale Gas Extraction” Environmental Science & Technology, 47:23, 1322013221, 2013.

He, C., Zhang, T. and Vidic, R.D. “Use of abandoned mine drainage for the development of natural gas resources” Disruptive Science and Technology, DOI: 10.1089/dst.2013.0014, 2013.

Murali Mohan, A., Hartsock, A., Hammack, R.C., Vidic, R.D. and Gregory, K.B. “Microbial Communities in Flowback Water Impoundments from Hydraulic Fracturing for Recovery of Shale Gas” FEMS Microbial Ecology, 86, 567-580, 2013.

Theregowda, R., Hsieh, M-K., Walker, M.E., Landis, A. E., Abbasian, J., Vidic, R.D. and Dzombak, D.A. “Life Cycle Costs to Treat Secondary Municipal Wastewater for Reuse in Cooling Systems” Journal of Water Reuse and Desalination, 3:3, 224-238, 2013.

Safari, I., Hsieh, M-K., Chien, S-H., Walker, M., Dzombak, D., Vidic, R.D., Abbasian, J. “Effect of CO2 Stripping on pH in Open-Recirculating Cooling Water Systems” Environmental Progress and Sustainable Energy, 2013. DOI 10.1002/ep11769.

Chien, S.H., Dzombak, D.A. and Vidic, R.D “Comprehensive evaluation of biological growth control by chlorine-based biocides in power plant cooling systems using tertiary effluent” Environmental Engineering Science, 30:6, 324-332, 2013.

Dale, A., Vidic, R.D., Khanna, V., Bilec, M. “Process Based Life-Cycle Assessment of Natural Gas from the Marcellus Shale” Environmental Science & Technology, 47:10, 5459-5466, 2013.

Safari, I., Walker, M.E., Hsieh, M.K., Dzombak, D.A., Liu, W., Vidic, R.D., Miller, D.C. and Abbasian, J. ”Utilization of municipal wastewater for cooling in thermoelectric power plants” Fuel, 111, 103-113, 2013.

Vidic, R.D., Brantley, S.L., Vandenbossche, J.M., Yoxtheimer, D. and Abad, J.D. “Impact of Shale Gas Development on Regional Water Quality” Science, 340:6134, 1235009, 2013.

Barbot, E., Vidic, N., Gregory, K. and Vidic, R.D. “Spatial and Temporal Correlation of Water Quality Parameters of Produced Waters from Devonian-age Shale following Hydraulic Fracturing” Environmental Science & Technology, 47, 2562-2569, 2013.

Hsieh, M.K., Walker, M.E., Safari, I., Chien, S.H. Abbasian, J., Vidic, R.D. and Dzombak, D.A. “Ammonia stripping in open-recirculating cooling water systems” Environmental Progress & Sustainable Energy, 32:3, 489-495, 2013.

204

Zhang, T., Bain, D. and Vidic, R.D. “Fate of radium from flowback/produced water in centralized impoundments, treatment facilities, and solid waste disposal options” 246th ACS National Meeting and Exposition, Indianapolis, IN, September 8-12, 2013.

Vidic, R.D., Brantley, S.L., Abad, J.D., Vastine, J., Yoxtheimer, D., Wildermann, C. and Hooper, R.P. “Sharing water quality and quantity data in areas of the Marcellus Shale energy resource to encourage sustainable choices for communities” 246th ACS National Meeting and Exposition, Indianapolis, IN, September 8-12, 2013.

Gregory, K.B., Murali Mohan, A. and Vidic, R.D. “Microbial communities and the fate of uranium in simulated produced water impoundments from hydraulic fracturing” 246th ACS National Meeting and Exposition, Indianapolis, IN, September 8-12, 2013.

He, C. and Vidic, R.D. “Use of acid mine drainage in recycling of Marcellus Shale flowback water: Solids removal and fouling mechanism identification” 246th ACS National Meeting and Exposition, Indianapolis, IN, September 8-12, 2013.

Zhang, T., Bain, D. and Vidic, R.D. “Fate of radium from flowback/produced water in centralized impoundments, treatment facilities, and solid waste disposal options” 246th ACS National Meeting and Exposition, Indianapolis, IN, September 8-12, 2013.

Gregory, K.B., Murali Mohan, A., and Vidic, R.D. “Produced water management: Importance of microbial ecology for the fate of naturally occurring radioactivity” Overcoming the Environmental and Community Challenges of Hydraulic Fracturing for Shale Gas, Boulder, CO, August 4-8, 2013.

He, C. and Vidic, R.D. “Formation and Transport of Barite in Unconventional Gas Wells” Overcoming the Environmental and Community Challenges of Hydraulic Fracturing for Shale Gas, Boulder, CO, August 4-8, 2013.

Zhang, T., Bain, D. and Vidic, R.D. “An Expedited Method for Ra-226 Measurement and Fate of Ra-226 from Flowback/Produced Water in Centralized Impoundments and Treatment Facilities” Overcoming the Environmental and Community Challenges of Hydraulic Fracturing for Shale Gas, Boulder, CO, August 4-8, 2013.

Na Wei, J. Quarterman, S.R. Kim, J. H. D. Cate and Y.S. Jin, “Enhanced biofuel production through coupled acetic acid and xylose consumption by engineered yeast” Nature Communications, 2013(4).

Na Wei, H.Q. Xu and Y.S. Jin, “Deletion of FPS1 coding for aquaglyceroporin Fps1p improves xylose fermentation by engineered Saccharomyces cerevisiae” Applied and Environmental Microbiology. 2013, 79(10), 3193-3201.

Na Wei, J. Quarterman, and Y.S. Jin, “Marine plant biomass: an untapped resource for producing fuels and chemicals” Trends in Biotechnology. 2013, 31(2) 70-77. (Selected as the featured cover story).

Soo Rin Kim, J.M. Skerker, W. Kang, A. Lesmana, N. Wei, A.P. Arkin, & Y.S.Jin, “Rational and evolutionary engineering approaches uncover a small set of genetic changes efficient for rapid xylose fermentation in Saccharomyces cerevisiae” PLOS One.

205

Yu, Q., Bažant, Z.P., and Le, J.-L. (2013). “Scaling of strength of metal-composite joints: Numerical simulation.” Journal of Applied Mechanics, ASME, July, 80(5), 054503(4 pages).

Bažant, Z.P., and Yu, Q. (2013). “Relaxation of prestressing steel at varying strain and temperature: viscoplastic constitutive relation” Journal of Engineering Mechanics, ASCE, 139(7), pp. 814-823.

Bažant, Z.P., Kim, K.-T., and Yu, Q. (2013). “Non-uniqueness of cohesive-crack stress-separation law of human and bovine bones and remedy by size effect tests” International Journal of Fracture, 181, pp. 67-81.

Yu, Q., Pan, C., and Tong, T. (2013). “A multi-scale material model for predicting the multidecade behavior of concrete structures” Structures Congress 2013, ASCE, eds. (Leshko & McHugh), Pittsburgh, PA, United States, pp. 1891-1902.

Yu, Q., and Bažant, Z.P. (2013). “Viscoplastic constitutive relation for relaxation of prestressing steel at varying strain and temperature” Mekchanics and Physics of Creep, Shrinkage, and Durability of Concrete, IA-CONCREEP, ASCE, edited by Ulm, Jennings, and Pellenq, September 22-25, 2013, Cambridge, MA, USA, pp. 459 - 466.

Bažant, Z.P., Hubler, M.H., Wendner, R. and Yu, Q. (2013). “Progress in creep and shrinkage prediction engendered by alarming bridge observations and expansion of laboratory database” Mekchanics and Physics of Creep, Shrinkage, and Durability of Concrete, IA-CONCREEP, ASCE, edited by Ulm, Jennings, and Pellenq, September 22-25, 2013, Cambridge, MA, USA, pp.

1-17.

Department of Electrical and Computer Engineering A.Abousamra, A.K. Jones and R. Melhem, “Proactive Circuit Allocation in Multiplane NoCs,” Proceedings of the Design Automation Conference (DAC), June 2013 (best paper nominee). Doi: 10.1145/2463209.2488778 Bahar, A.K. Jones, S. Katkoori, P.H. Madden, D. Marculescu and I.L. Markov, “Scaling the Impact of EDA Education: Preliminary Findings from the CCC Workshop Series on Extreme Scale Design Automation,” IEEE MSE Conference, June 2013 (invited paper).

Doi: 10.1109/MSE.2013.6566706 X. Bi, M. Mao, D. Wang and H. Li, “Unleashing the Potential of MLC STT-RAM Caches,” IEEE/ACM International Conference on Computer-Aided Design (ICCAD), 429-436, Nov. 2013,.

(Best Paper Nomination) Doi: 10.1109/ICCAD.2013.6691153 X. Bi, M. Weldon and H. Li, “STT-RAM Cell Design Supporting Dual-port Accesses,” Design, Automation & Test in Europe, Mar. 2013. Doi: 10.7873/DATE.2013.180 S-H .Chae, W. Yu, D.L. Duong, H.Y. Jeong, D. Perello, Q.H. Ta, T.H. Ly, X. Duan, M. Yun and Y.H. Lee, “Transferred Wrinkled Al2O3 for Highly Stretchable and Transparent Graphene/carbon Nanotube Transistor,” Nature Materials, 12, 403-409, 2013. Doi: 10.1038/mat3572.

206

L.F. Chaparro, E. Sejdić, A. Can, O. Alkishriwo, S. Senay and A. Akan, “Asynchronous Representation and Processing of Non-stationary Signal in a Time-frequency Context,” IEEE Signal Processing Magazine, 30(6), 42-52, Nov. 2013. Doi: 10.1109/MSP.2013.2267811 M. Choudhary and K. Mohanram, “Low Cost Concurrent Error Masking Using Approximate Logic Circuits,” (to appear) IEEE Transactions on Computer-aided Design, Jan. 2013. Doi: 10.1109/TCAD.2013.2250581 L. Chen, C. Li, T. Huang, Y. Chen, S. Wen, and J. Qi, “A Synapse Memristor Model with Forgetting Effect,” Physics Letters A, 377(45–48), 3260-3265, Dec. 2013. Doi: 10.1016/j.physleta.2013.10.024 L. Chen, C. Li, T. Huang, Y. Chen and X. Wang, “Memristor Crossbar-based Unsupervised Image Learning,” Neural Computing and Applications (NCA), Nov. 2013. Doi: 10.1007/s00521013-1501-0 X. Chen, Y. Chen, Z. Ma, F. Fernandes, and J. Xue, “Dynamic Tone Mapping on OLED Display Based on Video Classification,” Design Automation Conference (DAC), June 2013. (Work-inprogress Session) X. Chen and H. Li, “P-Spectrum: A Personalized Smartphone Power Management Technique Based on Real-time Battery and User Behavior Monitoring,” Design Automation Conference (DAC), June 2013. (Work-in-progress Session) X. Chen, Z. Ma, F.C.A. Fernandes and Y. Chen, “How is Energy Consumed in Smartphone Display Applications,” The International Workshop on Mobile Computing Systems and Applications (HotMobile), Feb. 2013.

X. Chen, Y. Chen, Z. Ma, F. Fernandes, and J. Xue, “Dynamic Tone Mapping on OLED Display Based on Video Classification,” Design Automation Conference (DAC), June 2013. (Work-inprogress Session) Y. Chen, W. Zhang and H. Li, “A Hardware Security Scheme for RRAM-based FPGA,” International Conference on Field Programmable Logic and Applications (FPL), Sept. 2013. Doi: 10.1109/FPL.2013.6645556 Y. Chen, J. Guo, and Z. Sun, CPU-GPU System Designs for High Performance Computing, (in High Performance Semantic Cloud Auditing, Editor: Keesook Han and Baek-Young Choi), Springer, Aug. 31, 2013, ISBN: 978-14-614-3295-1.

Y. Chen, W. Wong, H. Li, C.-K. Koh, *Y. Zhang, and *W. Wen, “On-chip Caches built on MultiLevel Spin-Transfer Torque RAM Cells and Its Optimizations,” ACM Journal on Emerging Technologies in Computing Systems (JETC), 9(2), 16, May 2013.

Doi: 10.1145/2463585.2463592.

I.Djurović, V. Rubežić and E. Sejdić, “A Scaling Exponent-based Detector of Chaos in Oscillatory Circuits,” Physica D: Nonlinear Phenomena, 242(1), 67-73, Jan. 2013. Doi: 10.1016/j.physd.2012.09.003

207

J. Guo, W. Wen, Y. Zhang, H. Li and Y. Chen, “DA-RAID-5: A Disturb Aware Data Protection Technique for NAND Flash Storage Systems,” Design, Automation & Test in Europe, Mar. 2013.

Doi: 10.7873/DATE.2013.087 J. Guo, J. Yang, Y. Zhang and Y. Chen, “Low Cost Power Failure Protection for MLC NAND Flash Storage Systems with PRAM/DRAM Hybrid Buffer,” Design, Automation & Test in Europe, Mar. 2013. Doi: 10.7873/DATE.2013.181 J. Guo, G. Sun, J. Xue, and H. Li, “The Detection of Malicious Data Attack on NAND Flash Storage System Based on Power Signature,” Design Automation Conference (DAC), June 2013.

(Work-in-progress Session) M. Hu, H. Li, G. Rose, Q. Wu and Y. Chen, “Training Scheme Analysis for Memristor-based Neuromorphic Design,” International Workshop on Neuromorphic and Brain-based Computing Systems (NeuComp), Mar. 2013.

M. Hu, H. Li, Q. Wu, G. S. Rose and Y. Chen, “BSB Training Scheme Implementation on Memristor-Based Circuit,” IEEE Symposium Series on Computational Intelligence (SSCI), Apr. 2013. Doi: 10.1109/CISDA.2013.6595431 Y. Hu, H. Lee, S. Lee, and M. Yun, “A Highly Selective Electronic Nose Based on a Singlenanowire Array for Gas Identification,” Sensors and Actuators B, 181, 424-431, 2013.

Y. Hu, D. Perello, D. Kwon, M. Kim, and, M. Yun “Variation of Switching Mechanism in TiO2 Thin Film Resistive Random Access Memory (ReRAM) with Ag and Graphene Electrodes,” Microelectronic Engineering, 104, 42-47, 2013. Doi: 10.1016/j.mee.2012.11.009 H. Huang and E. Sejdić, “Assessment of Resting-state Blood Flow through Anterior Cerebral Arteries by Using Transcranial Doppler Recordings,” Ultrasound in Biology and Medicine, 39(12), 2285-2294, Dec. 2013. Doi: 10.1016/j.ultrasmedbio.2013.06.016 J. Huang, I. Lee, X. Luo, X. T. Cui and M. Yun “Shadow Asking for Nanomaterial-based Biosensors Incorporated with A Microfluidic Device,” Biomedical Microdevices, 15, 531-537, 2013.

Jestrović, J.M. Dudik, B. Luan, J.L. Coyle and E. Sejdić, “The Effects of Increased Fluid Viscosity on Swallowing Sounds in Healthy Adults,” Biomedical Engineering Online, 12, 90-117, Sept. 2013. Doi: 10.1186/1475-925X-12-90 Jestrović, J.M. Dudik, B. Luan, J.L. Coyle and E. Sejdić, “Baseline Characteristics of Cervical Auscultation Signals During Various Head Maneuvers,” Computers in Biology and Medicine, 43(12), 2014-2020, Dec. 2013. Doi: 10.1016/j.compbiomed.2013.10.005 F. Ji, H. Li, B. Wysocki, C. Thiem and N. McDonald, “Memristor-based Synapse Design and a Case Study in Reconfigurable Systems,” International Joint Conference on Neural Networks (IJCNN), Aug. 2013. Doi: 10.1109/IJCNN.2013.6706776 A. Jones, Y. Chen, W. Collinge, H. Xu, L. Schaefer, A. Landis and M. Bilec, “Considering Fabrication in Sustainable Computing,” International Conference on Computer Aided Design (ICCAD), Nov. 2013. Doi: 10.1109/ICCAD.2013.6691120

208

R. Khanna, A. Amrhein, W. Stanchina, G. Reed and Z. Mao, “An Analytical Model for Evaluating the Influence of Device Parasitics on Cdv/dt Induced False Turn-on in SiC MOSFETs,” Paper 11.3 of 28th IEEE Applied Power Electronics Conference, Long Beach, CA, Mar. 17-21, 2013. Doi: 10.1109/APEC.2013.6520259 H.K. Kim, G.W. Hanson and D.A. Geller, “Are Gold Clusters in RF Fields Hot or Not?” Science 340, 441-442, 2013. http://www.sciencemag.org/content/340/6131/441.full.pdf. Doi: 10.1126/science.1237303\ M. Kim, Y. H. Lee, and M. Yun, “Analysis of Extremely Low Noise Carbon Nanotube Devices for Various Device Applications,” The U.S.- Korea Nano Bio Information Technology Program, Seoul, Korea, July, 12, 2013.

M.J. Korytowski, J. Fodiak, J. Daniel, G.F. Reed and N. Scott, “Integration of Offshore Wind Power to the US Grid,” Wind Integration Workshop – International Workshop on Large-Scale Integration of Wind into Power Systems and Transmission Networks for Offshore Wind Power Plants, London, UK, Oct. 2013.

S. Levitan, Y. Fang and D.M. Chiarulli, “Using Analog Memory with Coupled Oscillators for Pattern Recognition Applications,” 5th Non-volatile Memory Workshop (NVMW), San Diego, CA, Mar. 9-11.

B. Li, M. Hu, Y. Wang, Y. Chen and H. Yang, “Memristor-based Approximated Computation,” International Symposium on Low Power Electronics and Design (ISLPED), 242-247, Sept. 2013.

Doi: 10.1109/ISLPED.2013.6629302 B. Li, M. Hu, Y. Wang, Y. Chen and H. Yang, “Memristor-based Neuromorphic Computing Engine,” International Symposium on Low Power Electronics and Design (ISLPED), Sept. 2013.

J. Li, L. Shi, Q. Li, C. J. Xue, Y. Chen and Y. Xu, “Cache Coherence Enabled Adaptive Refresh for Volatile STT-RAM,” Design, Automation & Test in Europe, 1247-1250, Mar. 2013. Doi: 10.7873/DATE.2013.258 Jiayin Li, Yirong Zhao, David B. Dgien, Nathan A. Hunter and Kartik Mohanram, "Dual-port PCM Architecture for Network Processing,'' Proceedings of the Non-Volatile Memories Workshop, Mar. 3-5, 2013.

J. Li, L. Shi, Q. Li, C. Xue, Y. Chen, Y. Xu and W. Wang, “Low-energy Volatile STT-RAM Cache Design Using Cache Coherence Enabled Adaptive Refresh,” ACM Transactions on Design Automation of Electronic Systems (TODAES), 19(1), Article 5, Dec. 2013. Doi: 10.1145/2534393 Q. Li, J. Li, L. Shi, C. J. Xue, Y. Chen and Y. He, “Compiler-assisted Refresh Minimization for Volatile STT-RAM Cache,” 17th Asia and South Pacific Design Automation Conference (ASPDAC), 273-278, Jan. 2013. Doi: 10.1109/ASPDAC.2013.6509608 Y. Li, Y. Zhang, H. Li, Y. Chen, and A. Jones, “C1C: A Configurable, Compiler-guided STTRAM L1 Cache,” ACM Transactions on Architecture and Code Optimization (TACO), 10(4), 52, Dec. 2013. Doi: 10.1145/2541228.2555308.

209

B. Liu, Y. Chen, B. Wysocki, and T. Huang, “Reconfigurable Neuromorphic Computing System with Memristor-Based Synapse Design,” Neural Processing Letters (NPL), 1-9, Aug. 2013. Doi: 10.1007/s11063-013-9315-8 B. Liu, M. Hu, H. Li, Y. Chen and J. Xue, “Bio-inspired Ultra Lower-power Neuromorphic Computing Engine for Embedded Systems,” International Conference on Hardware/Software Codesign and System Synthesis (CODES+ISSS), Oct. 2013. (invited abstract) Doi: 10.1109/CODES-ISSS.2013.6659010 B. Liu, M. Hu, T. Huang, H. Li, Z.-H. Mao, W. Zhang and Y. Chen, “Digital-assisted Noise Eliminating Training for Memristor Crossbar-based Analog Neuromorphic Computing Engine,” Design Automation Conference (DAC), Article 7, June 2013. Doi: 10.1145/2463209.2488741 X. Liu, J.R. Stachel, E. Sejdić, M.H. Mickle and J.L. Berger, “The UHF Gen 2 RFID System for Transcutaneous Operation for Orthopedic Implants,” Proceedings of 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2013), Minneapolis, MN, May 6-9. Doi: 10.1109/I2MTC.2013.6555688 K.A. Lowry, E. Sejdić and J.S. Brach, “Acceleration-based Gait Analysis: Accelerating Mobility Assessment in Older Adults,” Aging Health, 9(5), 465-467, Oct. 2013. Doi: 10.2217/ahe.13.53 B. Luan, P. Soros and E. Sejdić, “A Study of Brain Networks Associated with Swallowing Using Graph-theoretical Approaches,” PLoS ONE, e73577-1-11, Aug. 2013.

Doi: 10.1371/journal.pone.0073577 M.F. Lupu, M. Sun, R. Xia and Z.-H. Mao, “Rate of Information Transmission in Human Manual Control of an Unstable System,” IEEE Transactions on Human-Machine Systems 43(2), 259-263, 2013. Doi: 10.1109/TSMC.2012.2235429 M. Mao, H. Li, Y. Chen and A. Jones, “Coordinating Prefetching and STT-RAM-based Lastlevel Cache Management for Multicore Systems,” Great Lakes Symposium on VLSI (GLVLSI), 55-60, May 2013. Doi: 10.1145/2483028.2483060 M. Mao, H. Li, A. Jones, J. Xue and Y. Chen, “Dynamic Prefetch Aggressiveness Tuning for STT-RAM-based Last-level Cache,” 4th Workshop on SoCs, Heterogeneous Architectures and Workloads (SHAW4), Feb. 2013.

M. Mao, G. Sun, Y. Li, A. Jones and Y. Chen, “Prefetching Techniques for STT-RAM Based Last-level Cache in CMP Systems,” Memory Architecture and Organization Workshop (MeoAW), Oct. 2013.

T.E. McDermott, T.A. Short, F.G. Velez and J.S. McDaniel, “Open Source Lightning Protection and Electromagnetic Transients Software,” 2013 IEEE PES General Meeting, Vancouver, BC, July 21-25, 2013.

Kartik Mohanram and Sundar Iyer, "Enabling Orders of Magnitude Reduction in Embedded Memory Certification and Trust Effort,'' Government Microcircuit Applications and Critical Technology Conference, Mar. 2013.

210

Kartik Mohanram, Matthew Wartell and Sundar Iyer, "Mempack: An Order of Magnitude Reduction in the Cost, Risk, and Time for Memory Compiler Certification,'' Design, Automation and Test in Europe Conference, Mar. 2013. Doi: 10.7873/DATE.2013.303 L. Niu, L. Medina and Y. Chen, “Reliability-aware Energy Minimization for Real-time Embedded Systems with Window-constraints,” ACM SIGBED Review, 10(2), 26, 2013. Doi: 10.1145/2518148.2518164 K. Nixon, X. Chen, Z.-H. Mao, K. Li and Y. Chen, “The Invisible Shield: User Classification and Authentication for Mobile Device Based on Gesture Recognition,” Design Automation Conference (DAC), June 2013. (Work-in-progress Session) K. Nixon, Y. Chen, Z.-H. Mao, and K. Li, User Classification and Authentication for MOBILE Device Based on Gesture Recognition, (in “Network Science and Cybersecurity”, Editor: Robinson Pino), Springer, Jun. 27, 2013, ISBN: 978-14-6147-596-5.

K. Nixon, X. Chen, Z.-H. Mao, K. Li and Y. Chen, “The Invisible Shield: User Classification and Authentication for Mobile Device Based on Gesture Recognition,” Design Automation Conference (DAC), June 2013. (Work-in-progress Session) K. Nixon, Z.-H. Mao, K. Li, and Y. Chen, “Mobile User Classification and Authorization Based on Gesture Usage Recognition,” 18th Asia and South Pacific Design Automation Conference (ASPDAC), 384-389, Jan. 2013. Doi: 10.1109/ASPDAC.2013.6509626 Ajay Ogirala, Joshua R. Stachel and Marlin H. Mickle, "In-vitro Test Modeling for Electromagnetic Compatibility Evaluation between CRMDs and RFID Systems, International Journal of Modeling and Simulation, Issue 2, Jan. 2013. Doi: 10.2316/Journal.205.2013.2.2055702 Ajay Ogirala, Peter J. Hawrylak and Marlin H. Mickle, Interoperability Verification in ISO18000-7 Active RFID Systems: Experimental Setup and Results, Wireless Personal Communications, 68(3), 619-635, 2013.

J. Pittner and M.A. Simaan, "Improvement in the Control of the Tandem Hot Strip Nill," IEEE Transactions on Industry Applications, 49(5), 1962-1970, Sept/Oct 2013, Doi: 10.1109/TIA.2013.2261794 J. Pittner and M.A. Simaan, "Control of the Tandem Hot Strip Mill under Expanded Uncertainties and Disturbances," Proceedings of the 2013 IEEE Industry Application Society Annual Meeting, Orlando, FL, Oct. 2013.

J. Pittner and M. A. Simaan, "Improvement in the Tandem Rolling of Hot Metal Sheet using a New Advanced Control Technique," Association for Iron and Steel Technology Magazine, Dec. 2013.

J. Pittner and M.A. Simaan, "An Advanced Control Method for Saving Energy in the Tandem Rolling of Hot Metal Strip," Proceedings of Energytech Conference 2013, Case Western Reserve University, Cleveland, OH. Doi: 10.1109/TIA.2013.2261794

211

J. Pittner and M. A. Simaan, "Novel Advanced Control for Tandem Hot Metal Sheet Rolling," AISTech-Iron and Steel Technology Conference Proceedings, 2, 2451-2463, May 2013, Pittsburgh, PA, ISSN: 15516997. Doi: 10.1109/IAS.2013.6682557 Reed, G., "Pittsburgh's Energy Partnerships," EnergyBiz, 10(2), 46-48, Mar. /Apr. 2013. http://energycentral.fileburst.com/EnergyBizMagazine/2013/MarApr13.pdf E. Sejdić, D. Kalika and N. Czarnek, “An Analysis of Resting-state Functional Transcranial Doppler Recordings from Middle Cerebral Arteries,” PLOS ONE, 8(2), e55405-1-9, Feb. 2013.

Doi: 10.1371/journal.pone.0055405 E. Sejdić, M. Rothfuss, J. Stachel, N. Franconi, K. Bocan, M.R. Lovell and M.H. Mickle “Innovation and Translation Efforts in Wireless Medical Connectivity, Telemedicine and eMedicine: A Story from the RFID Center of Excellence at the University of Pittsburgh,” Annals of Biomedical Engineering, 41(9), 1913-1925, Sept. 2013. Doi: 10.1007/s10439-013-0873-8 E. Sejdić, B. Findlay, C. Merey and T. Chau, “The Effects of Listening to Music or Viewing Television on Human Gait,” Computers in Biology and Medicine, 43(10), 1497-1501, Oct. 2013.

Doi: 10.1016/j.compbiomed.2013.07.019 E. Sejdić and L.A. Lipsitz, “Necessity of Noise in Physiology and Medicine,” Computer Methods and Programs in Biomedicine, 111(2), 459-470, Aug. 2013. Doi: 10.1016/j.cmpb.2013.03.014 E. Sejdić, C.M. Steele and T. Chau, “Classification of Penetration-aspiration Versus Healthy Swallows using Dual-axis Swallowing Accelerometry Signals in Dysphagic Subjects,” IEEE Transactions on Biomedical Engineering, 60(7), 1859-1866, July 2013. Doi: 10.1109/TBME.2013.2243730 E. Sejdić and L.F. Chaparro, “A Compressive Sampling Approach for Brain-machine Interfaces Based on Transcranial Doppler Sonography: A Case Study of Resting-state Maximal Cerebral Blood Velocity Signals,” Proceedings of 1st IEEE Global Conference on Signal and Information Processing (GlobalSIP 2013), 13-16, Austin, TX, Dec. 3-5, 2013.

Doi: 10.1109/GlobalSIP.2013.6736799 E. Sejdić and L.F. Chaparro, “Time-frequency Representations Based on Compressive Samples,” Proceedings of the 21st European Signal Processing Conference (EUSIPCO’13), Marrakech, Morocco, 1569742057-1-4, Sept. 9-13, 2013.

D.J. Shoup and G.F. Reed, " STATCOM Application to Address Grid Stability and Reliability: Part I," CIGRE National Committee 2013 Grid of the Future Symposium, Boston, MA, Oct. 2013.

J. Sledge, W.A. Graham, S. Westmoreland, E. Sejdić, A. Miller, A. Hoggatt and S. Nesathurai, “Spinal Cord Injury Models in Non Human Primates: Are Lesions Created by Sharp Instruments Relevant to Human Injuries?,” Medical Hypotheses, 81(4), 747-748, Oct. 2013. Doi: 10.1016/j.mehy.2013.07.040 J.R. Stachel, E. Sejdić, A. Ogirala and M.H. Mickle, “The Impact of the Internet of Things on Implanted Medical Devices Including Pacemakers, and ICDs,” Proceedings of 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2013), Minneapolis, MN, May 6-9. Doi: 10.1109/I2MTC.2013.6555533

212

C.M. Steele, E. Sejdić and T. Chau, “Noninvasive Detection of Thin-liquid Aspiration using Dualaxis Swallowing Accelerometry,” Dysphagia, 28(1), 105-112, Mar. 2013. Doi: 10.1007/s00455012-9418-9 Z. Sun, W. Wu, and H. Li, “Cross-layer Racetrack Memory Design For Ultra High Density And Low Power Consumption,” Design Automation Conference (DAC), Article 53, June 2013. Doi: 10.1145/2463209.2488799 J. Wang, Z. Sun, H. Li and W.F. Wong, “Practical Low-power Memristor-based Analog Neural Branch Predictor,” International Symposium on Low Power Electronics and Design (ISLPED), Sept. 2013. Doi: 10.1109/ISLPED.2013.6629290 S. Wen, Z. Zeng, T. Huang and Y. Chen, “Fuzzy Modeling and Synchronization of Different Memristor-based Chaotic Circuits,” Physics Letters A, 377(34–36), 2016–2021, Nov. 2013. Doi: 10.1016/j.physleta.2013.05.046 S. Wen, Z. Zeng, T. Huang, Y. Chen, “Passivity Analysis of Memristor-based Recurrent Neural Networks with Time-varying Delays,” Journal of the Franklin Institute, 350(8), 2354-2370, Oct 2013. Doi: 0.1016/j.jfranklin.2013.05.026 W. Wen, M. Mao, S. Kang, X. Zhu, D. Wang and Y. Chen, “CD-ECC: Content-Dependent Error Correction Codes for Combating Asymmetric Nonvolatile Memory Operation Errors,” International Conference on Computer Aided Design (ICCAD), Nov. 2013.

10.1109/ICCAD.2013.6691090 W. Wen, Y. Zhang, L. Zhang and Y. Chen, “Loadsa: A Yield-driven Top-Down Design Method for STT-RAM Array,” 17th Asia and South Pacific Design Automation Conference (ASPDAC), 291-296, Jan. 2013. Doi: 10.1109/ASPDAC.2013.6509611 Q. Xu, H. Wang, Z. Gao, Z.-H. Mao, J. He and M. Sun, “A Novel Mat-based System for Position-varying Wireless Power Transfer to Biomedical Implants,” IEEE Transactions on Magnetics, 49(8), 4774-4779, 2013. Doi: 10.1109/TMAG.2013.2245335 Q. Xu, Z. Gao, H. Wang, J. He, Z.H. Mao and M. Sun, “Batteries Not Included: A Mat-based Wireless Power Transfer System for Implantable Medical Devices as a Moving Target,” IEEE Microwave Magazine, 14(2), 63-72, 2013. Doi: 10.1109/MMM.2012.2234640 Y. Xu, H. Lee, Y. Hu, J. Huang, S. Kim and M. Yun, “Detection and Identification of Breast Cancer VOC Biomarkers Using Highly-Sensitive Single Nanowire Array on a Chip,” Journal of Biomedical Nanotechnology, 9, 1164-1172, 2013.

M. Yun, “Sustainable Nanowire-based Biosensor Development for Biomarker Detections of Cardiovascular Diseases”, The 6th International Symposium on the Physics of Semiconductors and Applications, Jeju, Korea, July, 2013.

Y. Zhang, I. Bayram, Y. Wang, H. Li and Y. Chen, “ADAMS: Asymmetric Differential STTRAM Cell Structure for Reliable and High-performance Applications,” International Workshop on Design Automation for Analog and Mixed-Signal Circuits, Nov. 2013.

213

L. Zhang, Z. Chen, J.J. Yang, B. Wysocki, N. McDonald and Y. Chen, “A Compact Modeling of TiO2-TiO2-x Memristor,” Applied Physics Letters (APL), 102(15), 153503, 2013. Doi: 10.1063/1.4802206 X. Zhang, L. Jiang, Y. Zhang, C. Zhang and J. Yang, “WoM-SET: Low Power Proactive-SET Based PCM Write Using WoM Code,” International Symposium On Low Power Electronics and Design, Beijing, China, Sept. 4-6, 2013. Doi: 10.1109/ISLPED.2013.6629297 Y. Zhang, I. Bayram, Y. Wang, H. Li and Y. Chen, “ADAMS: Asymmetric Differential STTRAM Cell Structure for Reliable and High-performance Applications,” International Conference on Computer Aided Design (ICCAD), Nov. 2013. Doi: 10.1109/ICCAD.2013.6691091 Y. Zhang, X. Bi, W. Wen, and Y. Chen, “MLC STT-RAM Design Considering Probabilistic and Asymmetric MTJ Switching,” IEEE International Symposium on Circuits and Systems (ISCAS), 113-116, May 2013. Doi: 10.1109/ISCAS.2013.6571795 Y. Zhang, W. Wen, and Y. Chen, Asymmetry in STT-RAM Cell Operations, (in Emerging Memory Technologies: Design, Architecture, and Applications, Editor: Yuan Xie), Springer, Aug. 31, 2013, ISBN: 978-14-419-9550-6.

B. Zhao, Y. Zhang and J. Yang, "A Speculative Arbiter Design to Enable High-frequency ManyVC Router in NOCS,” 7th International Symposium on Networks-on-Chip, Tempe, AZ. Doi: 10.1109/NoCS.2013.6558415 B. Zhao, J. Yang, Y. Zhang, Y. Chen and H. Li, “Common-Source-Line Array: An Area Efficient Memory Architecture for Bipolar Nonvolatile Devices,” ACM Transactions on Design Automation of Electronic Systems (TODAES), 18(4), 57, Oct. 2013. Doi: 10.1145/2500459 M. Zhao, H. Zhang, X. Chen, Y. Chen and J. Xue, “Online OLED Dynamic Voltage Scaling for Video Streaming Applications on Mobile Devices,” International Conference on Hardware/Software Codesign and System Synthesis (CODES+ISSS), Oct. 2013. Doi: 10.1109/CODES-ISSS.2013.6658996 M. Zhao, Y. Chen, X. Chen and C. Xue, “Online OLED Dynamic Voltage Scaling for Video Streaming Applications on Mobile Devices,” ACM SIGBED Review, 10(2), 18, 2013. Doi: 10.1109/CODES-ISSS.2013.6658996 P. Zhou, Y. Zhang and J. Yang, "The Design of Sustainable Wireless Sensor Network Node using Solar Energy and Phase Change Memory," Design, Automation and Test in Europe, Interactive presentation, 869-872, Mar. 2013. Doi: 10.7873/DATE.2013.183

Department of Industrial Engineering Abolghasem†,S., S. Basu†, M. R. Shankar, "Quantifying the Progression of Dynamic Recrystallization in Severe Shear Deformation at High Strain Rates," Journal of Materials Research, Vol. 28, pp. 2056-2069, 2013.

214

Assi, T.M., S.T. Brown, S. Kone, B.A. Norman, A. Djibo, D. L. Connor, A. R. Wateska, J. Rajgopal, R. B. Slayton, B.Y. Lee., “Removing the regional level from the Niger vaccine supply chain”, Vaccine. Vol. 31, No. 26, 10 June 2013, 2828-2834.

Barber J, Tronzo M, Harold Horvat C, Clermont G, Upperman J, Vodovotz Y, Yotov I., “A threedimensional mathematical and computational model of necrotizing enterocolitis.”, J Theor Biol.

2013 Apr 7; 322:17-32. PMID: 23228363, PMCID: 3646071. (E-publication) Barbot, E., Vidic, N., Gregory, K. and Vidic, R.D. “Spatial and Temporal Correlation of Water Quality Parameters of Produced Waters from Devonian-age Shale following Hydraulic Fracturing” Environmental Science & Technology, 47, 2562-2569, 2013 Basu†,S., S. Abolghasem†, M.R. Shankar, “Mechanics of Intermittent Plasticity Punctuated by Fracture during Shear Deformation of Mg Alloys at Near Ambient Temperatures,” Metallurgical and Materials Transactions A, Vol. 44, pp. 4558-4566, 2013.

Besterfield-Sacre, M., N.O. Ozaltin, A. Robinson, and L. Shuman, A. Shartrand and P. Weilerstein, “Factors Related to Entrepreneurial Knowledge in the Engineering Curriculum,” Journal of Engineering Entrepreneurship. 4(1), pp. 31-39, 2013.

Besterfield-Sacre, M., C. Matherly, G. Ragusa, L. Howard, and L.J. Shuman. “Assessing the Spectrum of International Undergraduate Engineering Education Experiences,” 2013 ASEE International Forum, Atlanta, GA, June 22, 2013.

Bountourelis, T., M.Y. Ulukus, J.P. Kharoufeh, and S.G. Nabors. “The modeling, analysis, and management of intensive care units”, In Handbook of Healthcare Operations Management: Methods and Applications, B.T. Denton (Editor), 2013, Springer, New York, NY. Chen, S., B.A. Norman, J. Rajgopal, B. Y. Lee, “Passive Cold Devices For Vaccine Supply Chains,” Annals of Operations Research. Dec. 2013, DOI 10.1007/s10479-013-1502-5.

Clermont, G., "Systems Medicine”, in:Werner Dubitzky, Olaf Wolkenhauer, Kwang-Hyan Cho, Hiroki Yokota (eds), Encyclopedia of Systems Biology. Springer-Verlag New York, LLC. Publication date: 3/15/2013.

Degirmenci, G., Kharoufeh, J.P. and R.O. Baldwin (2013). “On the performance evaluation of query-based wireless sensor networks.” Performance Evaluation, 70 (2), 124-147.

Gao, T. and P.W. Leu, “The role of propagating modes in silver nanowire arrays for transparent electrodes,” Optics Express, Vol. 21, no. S3, p. A419, Apr. 2013. [Online]. Available: http://www.opticsinfobase.org/oe/fulltext.cfm?uri=oe-21-S3-A419&id=252879 Gao, T. and P.W. Leu, “Copper nanowire arrays for transparent electrodes,” Journal of Applied Physics, Vol. 114, no. 6, pp. 063 107–063 107–6, August 2013. [Online]. Available: http://jap.aip.org/resource/1/japiau/v114/i6/p063107 s1 Gaussin, M., G. Hu, S. Abolghasem†, S. Basu†, M.R. Shankar, B. Bidanda, “Assessing the Environmental Footprint of Manufactured Products: A Survey of Current Literature,” International Journal of Production Economics, Vol. 146, pp. 515–523, 2013.

215

Haidari, L.A., D.L. Connor, A.R. Wateska, S.T. Brown, L.E. Mueller, B.A. Norman, M.M. Schmitz, P. Paul, J. Rajgopal, S. Welling, J. Leonard, S. Chen, and B.Y. Lee. (2013), “Augmenting transport versus increasing cold storage to improve vaccine supply chains”, PLoS ONE 8(5): e64303. doi:10.1371/journal.pone.0064303.

Haidari L.A., D.L. Connor, A.R. Wateska, S. T. Brown, L.E. Mueller, B. A. Norman, M. M. Schmitz, P. Paul, J. Rajgopal, J.S. Welling, J. Leonard, E.G. Claypool, Y. Weng, S. Chen, and B.Y. Lee. (2013), “Only adding stationary storage to vaccine supply chains may create and worsen transport bottlenecks”, Journal of Public Health Management and Practice. Vol. 19, Suppl.

2, Sep-Oct 2013, S65-7.

Haight, J.M., “Safety Issues Related to Petroleum Refineries, book chapter”, Manual 58, Handbook of Petroleum and Natural Gas Refining and Processing, ASTM International, Editor: Semeh Eser, Melville, NY, 2013 Haight, J.M., “Engineering Systems and Engineering Economics of Loss Prevention”, - book chapter, Handbook of Loss Prevention Engineering, Wiley – VCH, Weinheim, Germany, Editor: Joel M. Haight, V.1, 2013 Haight, J.M., - Editor Handbook of Loss Prevention Engineering, Wiley – VCH, Weinheim, Germany, Volumes 1 & 2, 2013 Haight, J.M., P. Yorio, and D.R. Willmer, “Health and Safety Management Systems – A Comparative Analysis of Content and Impact”, Proceedings of the American Society of Safety Engineers Professional Development Conference, 25 June, 2013, Las Vegas, NV. Hauskrecht, M., I. Batal, M. Valko, S. Visweswaran, G.F. Cooper, and G. Clermont. “Outlier detection for patient monitoring and alerting.” J Biomed Inform. 2013 Feb;46(1):47-55. Doi: 10.1016/j.jbi.2012.08.004. Epub 2012 Aug 27. PMID: 22944172; PMCID: 3567774. (Epublication) Hua, B., B. Wang, M. Yu, P. W. Leu, and Z. Fan, “Rational geometrical design of multi-diameter nanopillars for efficient light harvesting,” Nano Energy, September 2013. [Online]. Available: http://www.sciencedirect.com/science/article/pii/S2211285513000517 Icten, Z.G., S. Shechter, L.M. Maillart and M. Nagarajan (2013). “Optimal Management of a Limited Number of Replacements under Markovian Deterioration,” IIE Transactions, Vol. 45, No. 2, pp. 206-214.

Idell, Y., G. Facco, A. Kulovits, M.R. Shankar, J.M.K. Wiezorek, “Strengthening of Austenitic Stainless Steel by Formation of Nanocrystalline γ – phase through Severe Plastic Deformation during Two-Dimensional Linear Plane Strain Machining,” Scripta Materialia, Vol. 68, pp. 667– 670, 2013.

Kaufman, D. L., and A. J. Schaefer, “Robust Modified Policy Iteration,” 2013. INFORMS Journal on Computing volume 25, number 3, pp. 396-410.

Kharoufeh, J.P., Cox, S.M. and M.E. Oxley (2013). “Reliability of manufacturing equipment in complex environments.” Annals of Operations Research, 209 (1), 231-254.

216

Kong, N., A. J. Schaefer, and S. Ahmed, “Totally Unimodular Stochastic Programs,” 2013.

Mathematical Programming Series A volume 138, pp. 1-13.

Luangkesorn, K.L., F. Ghiasabadi***, and J. Chhatwal, (2013), “A Sequential Experimental Design Method to Evaluate a Combination of School Closure and Vaccination Policies to Control an H1N1-Like Pandemic”, Journal of Public Health Management and Practice, Vol, 19, S. 5, pp.

S37-41, PMID: 23903393.

Luangkesorn, K. L., G. Klein, and B. Bidanda, (2013), “Designing a production and distribution system with severe potential production disruptions”, International Conference on Production Research, Brazil, July 2013.

Luangkesorn, K.L., Python Simulation chapter to Nelson, 2013, Foundations and Methods for Stochastic Simulation (online only) Lukens, S., G. Clermont, and D. Swigon, “Sensitivity of Human Immune Response to Influenza A Virus Infection and its Dependence on Virus and Host Phenotypes”. J Crit Care 2013; 28(1):e7-e8.

Mostovyi, O., O.A. Prokopyev, and O.V. Shylo, “On Maximum Speedup Ratio of Restart Algorithms Portfolios,” INFORMS Journal on Computing, Vol. 25/2 (2013), pp. 222-229.

Norman, B.A., S.M. Bartsch, A.P. Duggan, M.B. Rodrigues, D.R. Stuckey, A.F. Chen, and B.Y. Lee, “The Economics and Timing of Pre-operative Antibiotics for Orthopedic Procedures,” Journal of Hospital Infection, Vol. 85, No. 4, Dec. 2013, 297-302.

Norman, B. A., S. Nourollahi, S. Chen, S. T. Brown, E. G. Claypool, D. L. Connor, M. M. Schmitz, J. Rajgopal, A. R. Wateska, and B. Y. Lee, “An Economic Model of Passive Cold Storage Devices for Vaccines,” Vaccine. Vol. 31, No. 45, 22 May 2013, 5232-8.

Norman, Bryan, and Bidanda, Bopaya, “Modeling and Analysis of Endoscope Reprocessing Operations,” Industrial and Systems Engineering Research Conference (ISERC), San Juan, Puerto Rico, May, 2013. (poster) Pajouh, F.M., B. Balasundaram, and O.A. Prokopyev, “On Characterization of Maximal Independent Sets via Quadratic Optimization,” Journal of Heuristics, Vol. 19/4 (2013), pp. 629– 644.

Rudnicka, E.A., M. Besterfield-Sacre, and L.J. Shuman, “Development and Evaluation of a Model to Assess Engineering Ethical Reasoning and Decision Making,” International Journal of Engineering Education. Vol. 29, no. 4 (2013), pp. 1–19.

Sandikci, B., L.M. Maillart, A.J. Schaefer, and M. Roberts (2013). “Alleviating the Patient’s Price of Privacy Through a Partially Observable Waiting List,” Management Science, Vol. 59, No. 8, pp. 1836-1854.

Sandikci, B., N. Kong, and A.J. Schaefer, “A Hierarchy of Bounds for Stochastic Mixed Integer Programs”, Mathematical Programming Series A Volume 138, pp. 253-272 Scala, N.M., J. Rajgopal and K.L. Needy, “A Base Stock Inventory Management System for Intermittent Spare Parts”, Military Operations Research, Vol. 18, No. 3, pp. 63-67, 2013.

217

Shankar, M.R., M.L. Smith, V.P. Tondiglia, K.M. Lee, M.E. McConney, D.H. Wang, L-S. Tan, and T.J. White, “Contactless, Photoinitiated Snap-through in Azobenzene-functionalized Polymers,” Proceedings of the National Academy of Sciences, Vol. 110, pp. 18792–18797, 2013.

(Press Coverage - Google: Snap to attention: Polymers that react and move to light and has been featured in NPR, Sciencedaily, The Engineer (UK), IIE Magazine etc.)

Shylo, O., O.A. Prokopyev, and A.J. Schaefer, “Stochastic Operating Room Scheduling for High Volume Specialties under Block Booking,” INFORMS Journal on Computing, Vol. 25/4 (2013), pp. 682–692.

Trapp, A.C., O.A. Prokopyev, and A.J. Schaefer, “On a Level-Set Characterization of the Integer Programming Value Function and its Application to Stochastic Programming,” Operations Research, 61/2 (2013), pp. 498–511.

Ursulenko, O., S. Butenko, and O.A. Prokopyev, “A Global Optimization Algorithm for Solving the Minimum Multiple Ratio Spanning Tree Problem,” Journal of Global Optimization, Vol. 56/3 (2013), pp. 1029–1043.

Zenker S., H.K. Kim, G. Clermont and M.R. Pinsky, “Robust model-based quantification of global ventricular torsion from spatially sparse three-dimensional time series data by orthogonal distance regression: evaluation in a canine animal model under different pacing regimes”, Pacing Clin Electrophysiol. 2013 Jan;36(1):13-23. Doi: 10.1111/j.1540 8159.2012.03496.x. Epub 2012 Aug 16. PMID: 22897587; PMCID: 3502665. (E-publication)

Department of Mechanical Engineering and Materials Science “Salt-induced pattern formation in evaporating droplets of lysozyme solutions” Heather Meloy Gorr, Joshua M. Zueger, Danial R. McAdams and John A. Barnard, Colloids Surf B Biointerfaces 2013, 103, 59 – 66.

Cassie Witherspoon, Peiqi Zheng, Markus Chmielus, Sven C. Vogel, David C. Dunand, Peter Müllner, “Texture and training of magnetic shape memory foam”, Acta Materialia 61 (2013) 2113.

Sang Hyun Byun and Sung Kwon Cho, 2013, “Wireless powering of electrowetting-on-dielectric (EWOD) microfluidics,” Journal of Heat Transfer Engineering, Vol. 34, No. 2-3, pp. 140-150.

Myung Gon Yoon, Sang Hyun Byun and Sung Kwon Cho, 2013, “Inherent amplitude modulation of AC-EWOD (Electrowetting on Dielectric) droplet,” Lab Chip., Vol. 13, No. 4, pp. 662-668.

Jian Feng and Sung Kwon Cho, “Micro propulsion in liquid by oscillating bubbles,” IEEE 26th International Conference on MEMS (MicroElectroMechanical Conference), Jan 20-24, 2013, Taipei, Taiwan, pp. 63-66.

Sang Hyun Byun, Myung Gon Yoon and Sung Kwon Cho, “Wireless EWOD (Electrowetting-onDielectric) with Amplitude Modulation/Demodulation,” Advances in Microfluidics & Nanofluidics, May 24-26, 2013, University of Notre Dame, Indiana, USA.

218

Jian Feng and Sung Kwon Cho, “Effects of bubble length and excitation frequency on micro propulsion by oscillating bubble,” 66th Annual Meeting of the Division of Fluid Dynamics, November 24-26, Pittsburgh, Pennsylvania 2013.

Jian Feng and Sung Kwon Cho, “Micro Propulsion by Oscillating Bubbles for Medibot Applications,” US-KOREA Conference 2013, East Rutherford, NJ, August 7 - 11, 2013.

B.V.K. Reddy, M. Barry, J. Li, M.K. Chyu, “Thermoelectric Performance of Novel Composite and Integrated Devices applied to Waste Heat Recovery”, ASME J. Heat Transfer, 135(3), 031706 (1-11), 2013.

B.V.K. Reddy, M. Barry, J. Li, M.K. Chyu, “Mathematical Modeling and Numerical Characterization of Composite Thermoelectric Elements”, Int. J. Thermal Sciences, 67, 2013, pp.

53-63.

M.K. Chyu and S. C. Siw, “Recent Advances of Internal Cooling Techniques for Gas Turbine Airfoils,” ASME Journal of Thermal Sciences and Engineering Application, Vol. 5, 021008, 2013.

T.I-P. Shih, S.G. Ramachandran, and M.K. Chyu, “Time-Accurate CFD Conjugate Analysis of Transient Measurement of the Heat-Transfer Coefficient in a Channel with Pin-Fins,” AIAA J. Propulsion and Power, Vol. 2, 2013, pp. 10-19.

B.V.K. Reddy, M. Barry, J. Li, M.K. Chyu, “Enhancement of Thermoelectric Device Performance Through Integrated Flow Channels,” Frontiers in Heat and Mass Transfer, 4, 023001, 2013.

S. Siw, M.A. Alvin, and M.K. Chyu, “Heat Transfer and Pressure Loss Characteristics of Zig-Zag Channel with Rib Turbulators,” ASME Turbo Expo, San Antonio, June 3-7, 2013, ASME Paper GT2013-95407 N. Miller, M.A. Alvin, and M.K. Chyu, “Effects of Jet Diameter and Surface Roughness on Internal Cooling Channels,” ASME Turbo Expo, San Antonio, June 3-7, 2013, ASME Paper GT2013-95400 N. Miller, Siw, S., M.K. Chyu, M.A. Alvin, “Optimization of Single Row Jet Impingement Array

by Varying Flow Rates,” 2013 ASME National Heat Transfer Conference, July 14-19, 2013, Minneapolis, MN, USA, HT2013-17342.

B.V.K. Reddy, M. Barry, J. Li, and M.K. Chyu, “Comprehensive Numerical Modeling of Thermoelectric Device Applied to Automotive Exhaust Gas Waste-heat Recovery.” ASME National Heat Transfer Conference, July 14-19, 2013, Minneapolis, MN, USA, Proceedings ASME HT2013.

Meyer, T., R. Harris, J. Auletta, S.A. Motlagh, L. Weiland, D. Waldeck, W.W. Clark, “Chemical and Electrochemical Manipulation of Mechanical Properties in Stimuli-Responsive CopperCrosslinked Hydrogels,” ACS Macro Letters, 2(12), pp. 1095-1099, December 2013.

Mo C, Arnold D, Kinsel WC, Clark WW, Modeling and Experimental Validation of Unimorph Piezoelectric Cymbal Design in Energy Harvesting. Journal of Intelligent Material Systems and Structures., April 2013, 24(7), pp. 828-836

219

Bond D, Kimber ML, Clark WW, Configuring Wall Layers for Improved Insulation Performance. Journal of Applied Energy, July 2013, 0, pp. 235-245 Pasi P. Suikkanen, Cyril Cayron, Anthony J. DeArdo, L. Pentti Karjalainen, “Crystallographic Analysis of Isothermally Transformed Bainite in 0.2C–2.0Mn–1.5Si–0.6Cr Steel Using EBSD,” J. Mater. Sci. Technol., 2013 Vol. 29 (4): 359-366.

A. J. DeArdo et al., The Alloy Design and Processing of High Strength Dual-Phase Steels for Production on Continuous Galvanizing Lines, International Conference on advanced High Strength Sheet Steels, AHSS2013, Vail, CO, June 23-27, 2013 A. J. DeArdo et al., The Microstructure and Properties of Vanadium-Bearing DP980 Steels Processed with Continuous Galvanizing Line Simulations, International Conference ISAS 2013, Anshan, China, May 10, 2013 A.J. DeArdo et al., Microalloyed Steels for High-Strength Forgings, ISAS 2013, Anshan , China A.J. DeArdo et al., Alloy design, processing, microstructure and properties of plate steels for use in API 5L X80-120 Large diameter, high pressure pipelines, Baosteel Academic Conference 2013, Shanghai China, June 4-5, 2013 X. Liang, A. J. DeArdo and M. Hua, The influence of thermomechanical controlled processing on the formation bainite in low carbon high strength steel, Invited Keynote Paper, Prof. Anthony DeArdo Honorary Symposium, International Conf. Thermec, Las Vegas, 2013.

X. Liang, C. I. Garcia and A. J. DeArdo, The mechanism of martensite-austenite microconstituents formation during thermomechanical controlled processing in low carbon bainitic steel, Prof. Anthony DeArdo Honorary Symposium, International Conf. Thermec, Las Vegas, 2013.

Galdi, Giovanni P.; Steady-State Navier–Stokes Problem Past a Rotating Body: GeometricFunctional Properties and Related Questions, Lecture Notes in Math., 2073, 109-197 Springer, Heidelberg, 2013 Galdi, Giovanni P.; Kyed, Mads: A simple proof of Lq-estimates for the steady-state Oseen and Stokes equations in a rotating frame. Part II: Weak solutions. Proc. Amer. Math. Soc. 141 13131322 (2013) Galdi, Giovanni P.; Kyed, Mads: A simple proof of Lq-estimates for the steady-state Oseen and Stokes equations in a rotating frame. Part I: Strong solutions. Proc. Amer. Math. Soc. 141 573583 (2013) Galdi, Giovanni P.: Existence and uniqueness of time-periodic solutions to the Navier–Stokes equations in the whole plane. Discrete Contin. Dyn. Syst. Ser. S 6 1237-1257 (2013) Galdi, Giovanni P., On Time-Periodic Flow of a Viscous Liquid past a Moving Cylinder, Arch.

Rational Mechanics Anal. 451-498 (2013)

220

Bemelmans, Josef, Galdi Giovanni P., and Kyed Mads: On the steady motion of a coupled system solid-liquid. Mem. Amer. Math. Soc. 226 vi+89 pp. (2013) Galdi, Giovanni P.; Mazzone, G., and Zunino, P., Inertial motions of a rigid body with a cavity filled with a viscous liquid, Comptes Rendus de l’Academie des Sciences, 341 760–765 (2013) Galdi, Giovanni P.; Yamazaki, M., Stability of solutions to the two-dimensional Navier-Stokes exterior problem, Gakuto Mathematical Sciences and Applications, 40, 1-27, 2013.

Constantin, P.; Debussche, A.; Galdi, G.P.; Růžička, M.; Seregin, G., Topics in mathematical fluid mechanics. Lecture Notes in Mathematics, 2073. Springer, Heidelberg; x+313 pp (2013) Redkin K.V., Vipperman J.S., Hrizo C., Schleiden R., Garcia C.I., Multi-scale Finite-Element Modeling and Microstructural Evaluation of Centrifugally Cast High-Speed Steel Finishing Rolls (feature article), Iron and Steel Technology Journal, Vol.10, No.10, pp.69-84, 2013 K. Redkin, J. Vipperman, C. Hrizo, and C.I. Garcia "Microstructural Optimization and Enhanced Performance of HSS Work Rolls by Non-Conventional Heat Treatments", Materials Science & Technology 2013 Conference & Exhibition October 27-31, 2013 | Montreal, Quebec Canada (Peer reviewed accepted for publication and presentation) "Multi-Scale Finite Element Modeling and Microstructural Evaluation of Centrifugally Cast HighSpeed Steel Finishing Rolls", K. Redkin, J. Vipperman, C. Hrizo, R. Schleiden, and C.I. Garcia, 50th Rolling Seminar Processes, Rolled and Coated Products 18th to 21st November 2013 in Ouro Preto - MG - Brazil. (Accepted for publication and presentation) Redkin K.V., Balakin B.V., Hrizo C., Vipperman J.S., Garcia C.I., 3-D CFD simulation of horizontal spin casting of high speed steel roll, abstract 1B.00085, 66th Annual Meeting of the American Physical Society, Division of Fluid Mechanics, Vol.58, No.18, November 2013, Pittsburgh Comparison of the Annealing Behavior of Three Cold Rolled (Ti-bearing, Nb-bearing and Vbearing) HSLA Steels R. Ordóñez Olivares, A. DeArdo and C.I. Garcia, XXII International Material Research Congress 2013, Symposium 4C Advanced Structural Materials Cancun, Qro. Mexico, August 11-15, 2013.

Annealing Behavior of Titanium Bearing HSLA Steels Through Electron Backscattering Diffraction, R. Ordóñez Olivares and C.I. Garcia, 2nd International Conference and Exhibition on Materials Science & Engineering 2013 Session Chairman, Las Vegas, NV, US. “A New Kinetics-Based Approach to Quantifying the Extent of Metastable → Stable Phase Transformation in Thermally-Grown Al2O3 Scales,” W. Zhao, Z. Li, and B. Gleeson, Oxidation of Metals, 79 (2013) 361-381.

“Steam Effects on the Oxidation Behavior of Al2O3-Scale Forming Ni-Based Alloys,” W. Zhao, and B. Gleeson, Oxidation of Metals, 79 (2013) 613-625.

“The Effect of Microstructure on the Type II Hot Corrosion of Ni-Base MCrAlY Alloys,” M.N. Task, B. Gleeson, F.S. Pettit, and G.H. Meier, Oxidation of Metals, 80 (2013) 125-146.

221

“Extreme Temperature Coatings for Future Gas Turbine Engines,” M. A. Alvin, B. Gleeson, K. Klotz, B. McMordie, B. Warnes and D. Zhu, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, Paper No. GT2013-94432, 10 pages. doi: 10.1115/GT2013-94432 “Compositional Factors Affecting the High-Temperature Degradation Behavior of Alloys Exposed to Relatively High PS2 – Low PO2 Atmospheres,” X. Wu and B. Gleeson, Paper 2850, Corrosion 2013. National Association of Corrosion Engineers, Houston (2013).

“On the Growth of Al2O3 Scales”, A.H. Heuer, T. Nakagawa, M.Z. Azar, D.B. Hovis, J.L. Smialek, B. Gleeson, N.D.M. Hine, H. Guhl, H.-S. Lee, P. Tangney, W.M.C. Foulkes, M.W. Finnis, Acta Materialia, 61 (2013) 6670-6683.

“Alloying-Element Loss During High-Temperature Processing of a Nickel-Base Superalloy,” S.L. Semiatin, J.M. Shank, W.M. Saurber, A.L. Pilchak, D.L. Ballard, F. Zhang, and B. Gleeson, Metallurgical and Materials Transactions (published September, 2013: DOI 10.1007/s11661-0132005-3) “The Effect of Environmental Sulfur on the Establishment and Structural Stability of Alumina Scales,” X. Liu and B. Gleeson, Oxidation of Metals, 80 (2013) 517-527 “Compositional Factors Affecting Protective Alumina Formation Under Type II Hot Corrosion Conditions,” M.N. Task, B. Gleeson, F.S. Pettit, and G.H. Meier, Oxidation of Metals, 80 (2013) 541-552.

P.H. Pisciuneri, S.L. Yilmaz, P.A. Strakey, and P. Givi, “An Irregularly Portioned FDF Simulator,” SIAM J. Sci. Comp., vol. 35, no. 4, pp. C438-C452 (2013).

Invited: S.L. Yilmaz, N. Ansari, P.H. Pisciuneri, M.B. Nik, C.C. Otis, and P. Givi, “Applied Filtered Density Function,” J. App. Fluid Mech., vol. 6, no. 3, pp. 311-320 (2013).

C.C. Otis, P. Ferrero, G.V. Candler, and P. Givi, “FDF in US3D,” Bulletin of the American Physical Society, vol. 58, no. 18, p. 350, 66th Annual Meeting of the Division of Fluid Dynamics of the American Physical Society, Pittsburgh, PA, November 24-26, 2013.

N. Ansari, G.M. Goldin, P.A. Strakey and P. Givi, “FDF Simulation of the PRECCINSTA Burner,” Bulletin of the American Physical Society, vol. 58, no. 18, p. 246, 66th Annual Meeting of the Division of Fluid Dynamics of the American Physical Society, Pittsburgh, PA, November 24-26, 2013 P.H. Pisciuneri, S.L. Yilmaz, P.A. Strakey, M.B. Nik and P. Givi, “Scalable FDF Simulation of Reacting Flows,” Bulletin of the American Physical Society, vol. 58, no. 18, p. 94, 66th Annual Meeting of the Division of Fluid Dynamics of the American Physical Society, Pittsburgh, PA, November 24-26, 2013.

Invited: P. Givi, “Computational Fluids Modeling and Simulation in the AC Industry,” 32nd International Activated Carbon Conference, Pittsburgh, PA, September 25-26, 2013.

Bond, D., Clark, W.W., and Kimber, M., 2013, “Configuring wall layers for improved insulation performance,” Applied Energy, 112, pp. 235-245.

222

Eastman, A., and Kimber, M., “Three dimensional flow around a biomimetic unbounded flapping cantilever,” FEDSM2013-16606, Proceedings of the 2013 ASME Fluids Engineering Division Summer Meeting, July 7-11, 2013, Incline Village, Nevada, USA. Clifford, C.E., Kimber, M., and Metzger, J.D., “Preliminary CFD analysis of high-thermal capacity dry storage systems,” American Nuclear Society: 2013 Annual Meeting, June 16-20, 2013, Atlanta, GA, USA. Landfried, D.T., Mazumdar, S., Jana, A., and Kimber, M., “Experimental study of jet impingement in a VHTR lower plenum,” NURETH15-607, 15th International Topical Meeting on Nuclear Reactor Thermalhydraulics, May 12-15, 2013, Pisa, Italy.

Mazumdar, S., Landfried, D.T.*, Jana, A., and Kimber, M., “Initial computational study of the thermal mixing in a VHTR lower plenum,” NURETH 15-608, 15th International Topical Meeting on Nuclear Reactor Thermalhydraulics, May 12-15, 2013, Pisa, Italy.

Mazumdar, S., Landfried, D.T.*, Jana, A., and Kimber, M., “Computational study of confined isothermal turbulent round jets,” NURETH 15-609, 15th International Topical Meeting on Nuclear Reactor Thermalhydraulics, May 12-15, 2013, Pisa, Italy.

Landfried, D.T.*, Goclano, B.*, and Kimber, M., “Design of a scaled non-isothermal experimental facility for studying the thermal hydraulics of the lower plenum of a prismatic VHTR,” NURETH 15-611, 15th International Topical Meeting on Nuclear Reactor Thermalhydraulics, May 12-15, 2013, Pisa, Italy.

S. Park*, J.K. Lee, “The effects of SiO2 addition to the BaO-ZnO-B2O3 glass for the application to the dielectric layer in the Plasma display panel,” Physics and Chemistry of Glasses - European Journal of Glass Science and Technology Part B 54, 133-136 (2013).

B. Ding, B.J. Lee, M.J. Yang, and J.K. Lee*, “Tunable Surface Plasmons of Dielectric CoreMetal Shell Particles for Dye Sensitized Solar Cells,” RSC Advances 3, 9690-9697 (2013).

Y.S. Jung, E. Stevens, S.-D. Kim, S.-K. Woo, and J.K. Lee*, “Microstructure and Electrical Property of Shape and Size Controlled MolybdenumParticle Thick Films,” J. Mater. Sci. 48, 37603768 (2013).

(Invited Perspective) H.S. Jung and J.K. Lee*, “Dye Sensitized Solar Cells for Economically Viable Photovoltaic Systems,” J. Phys. Chem. Lett. 4, 1682-1693 (2013).

MH Hong, CS Park, WS Seo, YS Lim, JK Lee, HH Park*, “Thermoelectric Properties of AlDoped Mesoporous ZnO Thin Films,” Journal of Nanomaterials, Volume 2013, p. 131537 (2013) MH Hong, CS Park, S Shin, HH Cho, WS Seo, YS Lim, JK Lee, HH Park*, “Effect of Surfactant Concentration Variation on the Thermoelectric Properties of Mesoporous ZnO,” Journal of Nanomaterials, Volume 2013, p. 172504 (2013) J.W. Wang, S. Narayanan, J.Y. Huang, Z. Zhang., T. Zhu, S.X. Mao. “Atomic-Scale Dynamic Process of Deformation-Induced Stacking Fault Tetrahedra in Gold Nanocrystals”, Nature Communication, DOI: 10.1038/ncomms3348 (2013).

223

J.W. Wang, Y. He , F.F. Fan , X.H. Liu, S. Xia , Y. Liu, C.T. Harris, H. Li, J.Y. Huang, S.X. Mao, T. Zhu. Two-Phase Electrochemical Lithiation in Amorphous Silicon. Nano Letters 13, 709-715 (2013).

Jian Yu Huang, Yu-Chieh Lo, Jun Jie Niu, Akihiro Kushima, Xiaofeng Qian, Li Zhong, Scott X. Mao and Ju Li, “Nanowire liquid pumps”, Nature Nanotechnology, 8, 277-281 ( 2013).

Jiangwei Wang, Frederic Sansoz, Jianyu Huang, Yi Liu, Shouheng Sun, Ze Zhang & Scott X. Mao, “Near-ideal theoretical strength in gold nanowires containing angstrom scale twins”, Nature Communication, 4, 1742, (2013).

Li Zhong, Robert R. Mitchell, Yang Liu, Betar M. Gallant, Carl V. Thompson, Jian Yu Huang, Scott X. Mao, and Yang Shao-Horn, In Situ Transmission Electron Microscopy Observations of Electrochemical Oxidation of Li2O2, Nano Lett.13, 2209-2214 (2013).

He Zheng, Jian Wang, Jian Yu Huang, Jianbo Wang, Ze Zhang, and Scott X. Mao, Dynamic Process of Phase Transition from Wurtzite to Zinc Blende Structure in InAs Nanowires, Nano Lett., 2013, 13 (12), pp 6023–6027 J. Wang, L. Liu, C. N. Tomé, S. X. Mao & S. K. Gong, “Twinning and De-twinning via Glide and Climb of Twinning Dislocations along Serrated Coherent Twin Boundaries in Hexagonal-closepacked Metals”, Materials Research Letters , Vol. 1, Issue 2, 81-88, 2013 Yujie Zhu, Jiang Wei Wang, Yang Liu, Xiaohua Liu, Akihiro Kushima, Yihang Liu, Yunhua Xu, Scott X Mao, Ju Li, Chunsheng Wang, Jian Yu Huang， In Situ Atomic-Scale Imaging of Phase Boundary Migration in FePO4 Microparticles during Electrochemical Lithiation. Advanced Materials， DOI10.1002/adma.201301374. (2013) Yi Lu, Ji-kang Liu, Xia-yuan Liu, Sen Huang,Ting-qiang Wang, Xiu-li Wang, Chang-dong Gu, Jiang-ping Tu and Scott X. Mao, Facile synthesis of Ni-coated Ni2P for supercapacitor applications, CrystEngComm, (2013) 15, 7071-7079.

N. Mu, K. Jung, N.M. Yanar, F.S. Pettit, G.R. Holcomb , B.H. Howard and G.H. Meier, “The Effects of Water Vapor and Hydrogen on the High-Temperature Oxidation of Alloys”, Oxid.

Metals, 79, 461 (2013).

M. N. Task, B. Gleeson, F. S. Pettit, G. H. Meier, “The Effect of Microstructure on the Type II Hot Corrosion of Ni-Base MCrAlY Alloys”, Oxid. Metals, 80, 125 (2013).

G. R. Holcomb, J. Tylczak, G. H. Meier, B. L Lutz, K. Jung, N. Mu, N. M. Yanar, F. S. Pettit, J. Zhu, A. Wise, D. E. Laughlin and S. Seetharaman, “Fireside Corrosion in Oxy-fuel Combustion in Coal” Oxidation of Metals, 80, 599 (2013).

G. H. Meier, Thermodynamics of Surfaces and Interfaces: Concepts in Inorganic Materials, Cambridge University Press, in press.

Sotereanos, NG; Wohlrab, D; Hofer, A; Kuxhaus, L, Miller, MC; “Subsidence in two uncemented femoral stems: an in vitro study”, Proc IMechE Part H: J Engineering in Medicine 227(10) 1067– 1072, 2013. doi: 10.1177/0954411913493877.

224

Schmidt, CC; Jarrett, CD, Brown, BT; DeGravelle, M; Sawardeker, P; Weir, DM; Latona, CR; Miller, MC; “Effect of lesser tuberosity osteotomy size and repair construct during total shoulder arthroplasty”, Journal of Shoulder & Elbow Surgery, July 2013. doi: 10.1016/j.jse.2013.03.018.

T. Chen, A. Finoli and I.Nettleship, “Effective Diffusion Distance for Isothermal Sintering of Hydroxyapatite,” Advances in Applied Ceramics, 112: 353-357 (2013).

I. Nettleship, “Improving Ceramic Processing Through the Application of Microstructure Mining,” Metallography, Microstructure and Analysis, 2 372-377 (2013).

M.S. Islam, C. Larimer, A. Ojha and I. Nettleship, “Antimycrobial Efficacy of Silver Nanoparticles as-Deposited on a Porous Membrane Filters,” Mat. Sci & Eng. C, 33 4575-4581 (2013).

AM Robertson, PN Watton, Chapter 8: Mechanobiology of the Arterial Wall, in Transport in Biological Media, Eds. S. Becker and A. V. Kuznetsov, p. 275-347 (73 pages), Elsevier, New York, ISBN: 978-0-12-415824-5, (published May 2013), (invited contribution).

A Valentin, X Duan, R Allen, P Zunino, Y Wang, AM Robertson, A Predictive Computational Model of Arterial Tissue Equivalent Evolution, The 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM 2013) McGill University, July 23-26, 2013 Montréal, Canada, (Extended abstract) Paper ID 718 (2 pages).

X Duan, JR Cebral, K Aziz, AM Robertson, An investigation of the variation in wall structure and collagen architecture in the domes of human cerebral aneurysms, The 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM 2013) McGill University, July 23-26, 2013 Montréal, Canada, (Extended abstract) Paper ID 718 (2 pages).

PN Watton, JR Cebral, AM Robertson, Aneurysm Modelling: From Basic Science to Clinical Translation, 3rd International Conference on Mathematical and Computational Biomedical Engineering (CMBE2013) December 16-18 2013, Hong-Kong, P. Nithiarasu and R. Löhner (eds) Chen H, Robertson A, Watton PN, A Novel Mathematical Model for the Microstructural Adaption of the Collagen Fabric during Aneurysm Evolution, 3rd International Conference on Mathematical and Computational Biomedical Engineering (CMBE2013) December 16-18 2013, Hong-Kong, P. Nithiarasu and R. Löhner (eds) M. Durka and AM Robertson, Abstract: L16.00011 : Is aspect ratio sufficient to classify intraaneurysmal hemodynamics- a parametric approach 66TH ANNUAL Meeting of the Division of Fluid Mechanics of the American Physical Society Meeting, Nov. 24-26, 2013, Pittsburgh, PA. Kim, G., Schaefer, L., Lim, T.S., and Kim, J.T., 2013, “Thermal Comfort Prediction of an Underfloor Air Distribution System in a Large Indoor Environment,” Energy and Buildings, vol.

64, pp. 323-331, doi: 10.1016/j.enbuild.2013.05.003.

DeBlois, J., Bilec, M., and Schaefer, L., 2013, “Simulating Home Cooling Load Reductions for a Novel Opaque Roof Solar Chimney Configuration,” Applied Energy, vol. 112, pp. 142-151, doi: 10.1016/j.apenergy.2013.05.084.

225

Bao, J., and Schaefer, L., 2013, “Lattice Boltzmann Equation Model for Multi-Component MultiPhase Flow with High Density Ratios,” Journal of Applied Mathematical Modelling, vol. 37, no.

4, doi:10.1016/j.apm.2012.04.048.

DeBlois, J., Bilec, M., and Schaefer, L., 2013, “Design and Zonal Building Information Modeling of a Roof Integrated Solar Chimney,” Renewable Energy, vol. 52, pp. 241-250, doi:10.1016/j.renene.2012.10.023.

Kerzmann, T., and Schaefer, L., 2013, “Flowrate Optimization of a Linear Concentrating Photovoltaic System,” Journal of Solar Energy Engineering, vol. 135, no. 2, doi: 10.1115/1.4023006.

Saunders, C.L., Landis, A.E., Mecca, L.P., Jones, A.K., Schaefer, L.A., and Bilec, M.M., 2013, “Analyzing the Practice of Life Cycle Assessment: Focus on the Building Sector,” Journal of Industrial Ecology, vol. 17, no. 5, pp. 777-788, doi: 10.1111/jiec.12028.

Thiel, C.L., Campion, N., Landis, A.E., Jones, A.K., Schaefer, L.A., Bilec, M.M., 2013, “A Materials Life Cycle Assessment of a Net-Zero Energy Building,” Energies, vol. 6, pp. 11251141, doi: 10.3390/en6021125.

Collinge, W.O., Landis, A.E., Jones, A.K., Schaefer, L.A., Bilec, M.M., 2013, “Indoor Environmental Quality in a Dynamic Life Cycle Assessment Framework for Whole Buildings: Focus on Human Health Chemical Impacts,” Building and Environment, vol. 62, pp. 182-190, doi: 10.1016/j.buildenv.2013.01.015.

Kim, G., Lim, H.S., Schaefer, L., and Kim, J.T., 2013, “Overall Environmental Modelling of Newly Designed Curtain Wall Façade Configurations,” Indoor and Built Environment, vol. 22, no.

1, pp. 168-179, doi:10.1177/1420326X12470281.

Kim, G., Schaefer, L., and Kim, J.T., 2013, “Development of a Double-Skin Façade for Sustainable Renovation of Old Residential Buildings,” Indoor and Built Environment, vol. 22, no.

1, pp. 180-190, doi:10.1177/1420326X12469533.

Collinge, W.O., Landis, A.E., Jones, A.K., Schaefer, L.A., and Bilec, M.M., 2013, “Dynamic Life Cycle Assessment: Framework and Application to an Institutional Building,” International Journal of Life Cycle Assessment, vol. 18, no. 3, pp. 538-552, doi:10.1007/s11367-012-0528-2.

Jones, A., Chen, Y., Collinge, W.O., Xu, H., Schaefer, L., Landis, A., and Bilec, M., 2013, “Considering Fabrication in Sustainable Computing,” International Conference on ComputerAided Design, San Jose, CA, 6691120, pp. 206-210.

Jones, A.K., Liao, L., Collinge, W.O., Xu, H., Schaefer, L.A., Landis, A.E., and Bilec, M.M., 2013, “Green Computing: A Life Cycle Perspective,” International Green Computing Conference, Arlington, VA. Xu, H., Bilec, M., Schaefer, L., Landis, A., and Jones, A., 2013, “Ocelot: A Wireless Sensor Network and Computing Engine with Commodity Palmtop Computers,” International Green Computing Conference, Arlington, VA.

226

Xu, L., and Schaefer, L., 2013, “A New Moving Boundary Condition in Particulate Suspensions with the Lattice Boltzmann Method,” 66th Annual Meeting of the APS Division of Fluid Dynamics, vol. 58, no. 18, R32.00008.

Chen, L., and Schaefer, L., 2013, “2D Unstructured Finite Volume Lattice Boltzmann Model for Flow with Complex Geometric Boundaries,” 66th Annual Meeting of the APS Division of Fluid Dynamics, vol. 58, no. 18, G5.00001.

Rao, P., and Schaefer, L., 2013, “A Second-Order Finite-Difference Scheme for the Lattice Boltzmann Method,” 66th Annual Meeting of the APS Division of Fluid Dynamics, vol. 58, no. 18, G5.00002.

Wang Q, Sharma N, Johnson M, Gregory CM, Dixon WE, Adaptive Inverse Optimal Neuromuscular Electrical Stimulation. IEEE Transactions on Cybernetics, 2013, 43(6), pp. 17101718.

Fischer N, Dani A, Sharma N, Dixon WE, Saturated Control of an Uncertain Nonlinear System with Input Delay. Automatica, 2013, 49(6), pp. 1741-1747.

Kirsch N, Alibeji N, Sharma N, Optimized Control of Different Actuation Strategies for FES and Orthosis aided Gait. ASME Dynamic Systems and Control Conference, 2013 N. Alibeji, N. Kirsch, and N. Sharma, "Control of Functional Electrical Stimulation in the Presence of Electromechanical and Communication Delays," 6th International IEEE EMBS Conference on Neural Engineering, San Diego, CA, 2013, pp. 299-302 A Debandi, A Maeyama, Y Hoshino, S Asai, B Goto, P Smolinski, F Fu, The Effect of Tunnel Placement on Rotational Stability after ACL Reconstruction: Evaluation With Use of Triaxial Accelerometry in a Porcine Model, Knee Surgery, Sports Traumatology, Arthroscopy, 21(3), 589595, 2013.

P Smolinski, M O’Farrell, K Bell, L Gilbertson Kim, F Fu, Effect of ACL Reconstruction Tunnels on Stress in the Distal Femur, Sports Traumatology, 21:839-845 2013.

Keklikci K,Yapici C, Kim D, Linde-Rosen M, Smolinski P, Fu F, The Effect of Notchplasy in Anterior Cruciate Ligament Reconstruction: A Biomechanical Study in Porcine Knees, Knee Surgery, Sports Traumatology, Arthroscopy, 21(8):1915-1921, 2013.

Kato Y, Maeyama A, Lertwanich P, Wang JH, Ingham S, Kramer S, Martins C, Smolinski P, Fu F, Biomechanical Comparison of Different Graft Positions for Single-Bundle Anterior Cruciate Ligament Reconstruction, Surg Sports Traumatol Arthrosc. 21:816-823 (2013) Araujo P, Linde-Rosen M, Smolinski P, Fu F, The ACL Graft Position Effects in In Situ Force, 2013 AAOS Annual Meeting, Chicago, IL, March 19-23, 2013.

Asai S, Kim D, Hoshino Y, Moon C-W, Maeyama A, Linde-Rosen M, Smolinski P, Fu F, The Effect of Coronal Location of the Tibial Anteromedial Tunnel in Double Bundle Anterior Cruciate Ligament Reconstruction, 59th Annual Meeting of the Orthopaedic Research Society, San Antonio, TX, February 26-29, 2013.

227

Kopf S, Ingham S, Martins C, Smolinski P, Fu F, The Morphology of the Medial Wall of the Lateral Femoral Condyle, 59th Annual Meeting of the Orthopaedic Research Society, San Antonio, TX, February 26-29, 2013.

Kim D, Hwang S-C, Lee S, Pronesti V, Linde-Rosen M, Smolinski P, Fu F, Biomechanical Comparison of Four Methods of Anatomic ACL Reconstruction Techniques using Quadriceps Tendon in a Human Cadaveric Model, 59th Annual Meeting of the Orthopaedic Research Society, San Antonio, TX, February 26-29, 2013.

Hwang S-C, Asai S, Goto B, Kramer S, Linde-Rosen M, Smolinski P, Fu F, Cross-Sectional Area of the Anterior Cruciate Ligament Mid-substance with Knee Flexion Angle , 59th Annual Meeting of the Orthopaedic Research Society, San Antonio, TX, February 26-29, 2013.

Kim D, Hwang SC, Lee S, Pronesti V, Linde-Rosen M, Smolinski P, Fu F, Effect Of Flexion Angle On The Cross-Sectional Area Of The Anterior Cruciate Ligament, 9th Biennial ISAKOS Congress, Toronto, Canada , May 12-16, 2013.

Hwang SC, Asai S, Goto B, Kramer S, Linde-Rosen M, Smolinski P, Fu F, Comparison Of Knee Biomechanics In Four Methods Of Quadriceps Tendon Anatomic ACL Reconstructions, 9th Biennial ISAKOS Congress , Toronto, Canada , May 12-16, 2013.

Pinto M, Protta T, Tantisricharoenkul G, Pronesti V, Linde-Rosen M, Smolinski P, Fu F, Biomechanical Function Of The Triple Bundle Anterior Cruciate Ligament In The Porcine Knee, 9th Biennial ISAKOS Congress, Toronto, Canada, May 12-16, 2013.

Asai S, Kim D, Hosino Y, Moon CW, Maeyama A, Linde-Rosen M, Smolinski P, Fu F, Effect Of Medial-Lateral Position Of The Tibial Anteromedial Bundle Tunnel On Knee Biomechanics, 9th Biennial ISAKOS Congress, Toronto, Canada, May 12-16, 2013.

Araujo P, Asai S, Pinto M, Protta T, Middleton K, Linde-Rosen M, Irrgang J, Smolinski P, Fu F, The ACL Graft Inclination Angle Effects in In Situ Force, 9th Biennial ISAKOS Congress, Toronto, Canada, May 12-16, 2013.

Chen L, Linde-Rosen M, Hwang SC, Ozyurek S, Kramer S, Smolinski P, Fu F, The Effect of Medial Meniscal Horn Injury on Rotational Stability of the Knee Using a Porcine Model, Annual Meeting of the Arthroscopic Association of North America, San Antonio, TX, April 25-27, 2013.

Zhou J, Tantisricharoenkul G, Shi DL, Chen L, Linde-Rosen M, Smolinski P, Fu F, Biomechanics of Single-Bundle and Double-Bundle ACL Reconstruction in the Medial MeniscusDeficient Procine Knees, Annual Meeting of the Arthroscopic Association of North America, San Antonio, TX, April 25-27, 2013 Fu Y, To A, On the evaluation of Hardy's thermomechanical quantities using ensemble and time averaging. Modeling and Simulation in Materials Science and Engineering, 2013, 21(055015) Biyikli E, Liu J, Yang X, To A, A fast method for generating atomistic models of arbitrary-shaped carbon graphitic nanostructures. RSC Advances, 2013, 3, pp. 1359-1362 Yang X, Qiao F, Zhu X, Zhang P, Chen D, To A, Coalescence of parallel finite length singlewalled carbon nanotubes by heat treatment, 2013, 74, pp. 436-440

228

Yang Q, Biyikli E, To A, Multiresolution molecular mechanics: statics. Computer Methods in Applied Mechanics and Engineering, 2013, 258, pp. 26-38 Kirca M, Yang X, To A, A stochastic algorithm for modeling heat welded random carbon nanotube network. Computer Methods in Applied Mechanics and Engineering., 2013, 259, pp. 1-9 Zhang P, To A, Broadband wave filtering of bioinspired hierarchical phononic crystal. Applied Physics Letters, 2013, 102, pp. 121910 Fu Y, To A, A modification to Hardy's thermomechanical theory that conserves fundamental properties more accurately. Journal of Applied Physics, 2013, 113(233505) Giri A, Tao J, Kirca M, To A, Mechanics of nanoporous metals. Handbook of Micromechanics and Nanomechanics, edited by S. Li and X. L. Gao (Pan Stanford, Singapore), pp. 827-862, 2013.

Fu Y, To A, Application of many-realization molecular dynamics method to understand the physics of nonequilibrium processes in solids. Mulitscale Simulations and Mechanics of Biological Materials., edited by S. Li and D. Qian, (Wiley, New York), pp. 59-76, 2013.

Bucci B, Vipperman JS, Cole D, Ludwick S, Evaluating a servo settling algorithm. Precision Engineering, January 2013, 37(1), pp. 10-22, PMID: DOE: 10.1016/j.precisioneng.2012.04.006 Ryan TS, Vipperman JS, Incorporation of Scheduling and Adaptive Historical Data in the Sensor Utility Network Method for Occupancy Estimation. Energy and Buildings, June 2013, 61, pp. 8892 Redkin KV, Vipperman JS, Hrizo C, Schleiden R, Garcia CI, Multi-scale Finite-Element Modeling and Microstructural Evaluation of Centrifugally Cast High-Speed Steel Finishing Rolls.

Iron and Steel Technology (AISTech) Journal, 2013, 10(10), pp. 69-84 Vipperman: Ginzburg VB, Flat Products Volume of the 11th edition; section 11.1.3. Multi-scale Finite-Element Modeling and Microstructural Evaluation of Centrifugally Cast High-Speed Steel Finishing Rolls. Making, Shaping, and Treating of Steel, December 2013 Redkin KV, Vipperman JS, Hrizo C, Schleiden R, Garcia CI, Multi-scale Finite Element Modeling and Microstructural Optimization of Cast High Speed Steel Finishing Rolls. 50th Rolling Seminar - Processes, Rolled and Coated Products, Brazilian Metallurgist, Materials and Mining Association (ABM), November 2013 Redkin KV, Vipperman JS, Hrizo C, Schleiden R, Garcia CI, Multi-Scale Finite Element Modeling and Microstructural Optimization of Cast High Speed Steel Finishing Rolls. PR-364194, 2013 AISTech Conference, 2013 Mang S, Vipperman JS, Comparison of Muffler Performance Criteria Using Finite Element Analysis and Field Measurement. IMECE-2013-64690; ASME IMECE 2012, 2013 Redkin KV, Vipperman JS, Hrizo C, Schleiden R, Garcia CI, Microstructural Optimization and Enhanced Performance of HSS Work Rolls by Non-Conventional Heat Treatment. Materials Science and Technology 2013 Conference and Exhibition, October 2013

229

Redkin KV, Balakin B, Hrizo C, Vipperman JS, Garcia CI, 3D CFD Simulation of Horizontal Spin Casting of High Speed Steel Roll. BAPS.2013.DFD.1B.85, 66th Annual Meeting of the APS Division of Fluid Dynamics, 2013 K. Liu, Y. Lei, and G. Wang, “Correlation between oxygen adsorption energy and electronic structure of transition metal macrocyclic complexes”, Journal of Chemical Physics, 139 (2013) 204306.

H. Lv, Y. Lei, A. Datta, and G. Wang, “Influence of surface segregation on magnetic properties of FePt nanoparticles”, Applied Physics Letters, 103, (2013) 132405.

S. Kattel and G. Wang, “A density functional theory study of oxygen reduction reaction on Me-N4 (Me=Fe, Co, or Ni) clusters between graphitic pores”, Journal of Materials Chemistry A, 1 (2013) 10790-10797.

Y. Lei, Y. Gong, Z. Duan, and G. Wang, “Density functional calculation of activation energies for lattice and grain boundary diffusion in alumina”, Physical Review B, 87 (2013) 214105.

S. Kattel, Z. Duan, and G. Wang, “Density functional theory study of an oxygen reduction reaction on a Pt3Ti alloy electrocatalyst”, Journal of Physical Chemistry C, 117 (2013) 7107-7113.

Z. Duan and G. Wang, “Comparison of reaction energetic for oxygen reduction reactions on Pt(100), Pt(111), Pt/Ni(100), and Pt/Ni(111) surfaces: A first-principles study”, Journal of Physical Chemistry C, 117 (2013) 6284-6292.

X. Sang, A. Kulovits, G. Wang, and J. Wiezorek, “Validation of density functionals for transition metals and intermetallics using data from quantitative electron diffraction”, Journal of Chemical Physics, 138 (2013) 084504.

Z. Duan, S. Kattel, and G. Wang, “Ab-initio modeling of oxygen reduction on Pt alloy electrocatalysts”, Abstracts of Papers of the American Chemical Society, 246th ACS National Meeting & Exposition, Indianapolis, Indiana, September 8-12, 2013.

G. Wang, S. Kattel, and K. Liu, “Density functional theory study of oxygen reduction on carbon supported nonprecious transition metal-nitrogen (TM-N/C) electrocatalysts”, Abstracts of Papers of the American Chemical Society, 246th ACS National Meeting & Exposition, Indianapolis, Indiana, September 8-12, 2013.

G. Wang, Z. Duan, and S. Kattel, “First-principles study of oxygen reduction mechanism on Ptalloy bimetallic electrocatalysts”, Abstracts of Papers of the American Chemical Society, 245th ACS National Meeting & Exposition, New Orleans, Louisiana, April 7-11, 2013.

Qian Chen, Yingying Sun, Lifeng Qin, and Qing-Ming Wang, “Piezoelectric Fiber Composite Based Cantilever Sensor for Electric Field Induced Strain Measurement in Soft Electroactive Polymer”, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2013, No. 10, Page(s): 2142 – 2153 Yizhong Wang, Allen X. Wang, Ying Wang, Minking Chyu, and Qing-Ming Wang,"Fabrication and Characterization of Carbon Nanotube-Polyimide Composite Based High Temperature Flexible Thin Film Piezoresistive Strain Sensor" Sensors and Actuators, A: Physics, Volume 199, 1 September 2013, Pages 265–271

230

Qian Chen, Yingying Sun, Ying Wang, Hongbin Cheng, and Qing-Ming Wang, “ZnO nanowires–polyimide nanocomposite piezoresistive strain sensor”, Sensors and Actuators A 190 (2013) 161– 167 Zhou, J.-J., Wang, K., Li, F., Li, J.-F., Zhang, X.-W., Wang, Q.-M., “High and frequencyinsensitive converse piezoelectric coefficient obtained in AgSbO-modified (Li, K, Na)(Nb, Ta)O lead-free piezoceramics,” Journal of the American Ceramic Society, volume 96, issue 2, year 2013, pp. 519 – 523 Qi Yu, Jing-Feng Li, Wei Sun, Zhen Zhou, Ying Xu, Zhen-Kun Xie, Feng-Ping Lai,and QingMing Wang, “Electrical properties of K0.5Na0.5NbO3 thin films grown on Nb:SrTiO3 singlecrystalline substrates with different crystallographic orientations”, J. Appl. Phys. 113, 024101 (2013).

Huiyan Wu, Fang Li, Qing-Ming Wang, “Characterization of Parylene-C Using Quartz Thickness Shear Mode (TSM) Resonators” 2013 Joint European Frequency and Time Forum & International Frequency Control Symposium (EFTF/IFCS), Page(s):787 – 790 Qian Chen, Qing-Ming Wang, “Piezoelectric PZT Fiber Composite as a Low Frequency Vibration Sensor” ISAF-PFM, 2013 IEEE—UFFC joint symposia on 21—25 July 2013, Prague, Czech Republic.

Yingying Sun, Lifeng Qin, Qing-Ming Wang, “Fabrication and Characterization of Thick Film Piezoelectric Lead Zirconate Titanate (PZT) By Tape Casting Processing” Ultrasonics Symposium (IUS), 2013 IEEE International, Page(s):1097 – 1100 Yizhong Wang, Minking Chyu, Qing-Ming Wang, “Passive wireless surface acoustic wave CO2 sensor for geological sequestration sites monitoring” 2013 Joint European Frequency and Time Forum & International Frequency Control Symposium (EFTF/IFCS). Page(s):470 - 473 Hao Xue, Qing-Ming Wang, “A Flexible Piezoelectric Power Generator Based on Selfassembled, Highly <001> Oriented BaTiO3 Micro Platelet Thin Layer by an Interfacial Strategy”, ISAF-PFM, 2013 IEEE—UFFC joint symposia on 21—25 July 2013, Prague, Czech Republic.

Hongfei Zu, Qing-Ming Wang, “Properties of Piezoelectric Single Crystals Ca3TaGa3Si2O14 at High-Temperature and High-Vacuum Conditions” IFCS-EFTF, 2013 IEEE—UFFC joint symposia on 21—25 July 2013, Prague, Czech Republic.

Sang X, Kulovits A, Wiezorek JM, Comparison of convergent beam electron diffraction methods for simultaneous structure and Debye Waller factor determination. Ultramicroscopy, 2013, 126, pp. 48-59 Sang X, Kulovits A, Wang G, Wiezorek JM, Validation of density functionals for transition metals and intermetallics using data from quantitative electron diffraction. Journal of Chemical Physics. 2013, 138(084504) Etoh J, Sagisaka M, Matsunaga T, Isobe Y, Garner F, Freyer P, Huang Y, Wiezorek JM, Okita T, Development of a non-destructive inspection method for irradiation-induced microstructural evolution in thick 304 stainless steel blocks. Journal of Nuclear Materials. 2013, 440, pp. 500-507

231

Idell Y, Facco G, Kulovits A, Shankar MR, Wiezorek JM, Strengthening of 316L stainless steel by formation of nanocrystalline gamma-phase through severe plastic deformation during twodimensional linear plane strain machining. Scripta Materialia. 2013, 68, pp. 667-670.

F.A. Garner, P.D. Freyer, D.L. Porter, J. Wiest, C. Knight, T. Okita, M. Sagisaka, Y. Isobe, J. Etoh, T. Matsunaga, Y. Huang, J. Wiezorek, “Void swelling and resultant strain in thick 304 stainless steel components in response to spatial gradients in neutron flux-spectra and irradiation temperature”, Proceedings of the 16th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors (Ashville, NC, August 2013), pp.

FA Garner, P. Freyer, DL Porter, C. Knight, T. Okita, M. Sagisaka, Y. Isobe, J. Etoh, T. Matsunaga, Y. Huang, J. Wiezorek, “Interactions between void swelling and irradiation creep in thick 304 stainless steel reflector blocks in response to gradients in neutron flux-spectra and irradiation temperature”, Radiation Damage Physics of Metals and Alloys (February 2013, Ufa, RU), 31-32.

Caputo, M., Chiastra, C., Cianciolo, C., Cutrì, E., Dubini, G., Gunn, J., Keller, B., Migliavacca, F., Zunino, P. Simulation of oxygen transfer in stented arteries and correlation with in-stent restenosis (2013) International Journal for Numerical Methods in Biomedical Engineering, 29 (12), pp. 1373-1387.

Galdi, G.P., Mazzone, G., Zunino, P. Inertial motions of a rigid body with a cavity filled with a viscous liquid (2013) Comptes Rendus - Mecanique, 341 (11-12), pp. 760-765.

Cutrì, E., Zunino, P., Morlacchi, S., Chiastra, C., Migliavacca, F. Drug delivery patterns for different stenting techniques in coronary bifurcations: A comparative computational study (2013) Biomechanics and Modeling in Mechanobiology, 12 (4), pp. 657-669.

Zunino, P. Analysis of backward Euler/extended finite element discretization of parabolic problems with moving interfaces (2013) Computer Methods in Applied Mechanics and Engineering, 258, pp. 152-165.

Cattaneo, L. and Chiastra, C. and Cutrì, E. and Migliavacca, F. and Morlacchi, S. and Zunino, P., An Immersed Boundary Method for Drug Release Applied to Drug Eluting Stents Dedicated to Arterial Bifurcations, Numerical Mathematics and Advanced Applications 2011, pp. 401-409, Springer Berlin Heidelberg, 2013

232

Faculty Awards and Honors AMERICAN ACADEMY OF ENVIRONMENTAL ENGINEERS AND SCIENTISTS EXCELLENCE IN ENVIRONMENTAL ENGINEERING AND SCIENCE COMPETITION, UNIVERSITY RESEARCH CATEGORY, 2013 GRAND PRIZE CORECIPIENT, to Radisav D. Vidic.

AMERICAN SOCIETY OF CIVIL ENGINEERS, elected fellow, to Jeen-Shang Lin. AMERICAN SOCIETY OF CIVIL ENGINEERS PITTSBURGH PROFESSOR OF THE YEAR, to Anthony T. Iannacchione.

SECTION

2013

AMERICAN SOCIETY OF MECHANICAL ENGINEERS, elected fellow, to Richard E. Debski.

AMERICAN SOCIETY FOR NONDESTRUCTIVE TESTING 2013 OUTSTANDING PAPER AWARD CORECIPIENT, to Piervincenzo Rizzo.

ASSOCIATION FOR COMPUTING MACHINERY GLSVLSI 2013 BEST PAPER AWARD, to Yiran Chen, Alexander K. Jones, and Hai Li. B. P. AMERICA FACULTY FELLOWSHIP, for outstanding productivity as a junior member of the faculty, to Robert S. Parker.

2013 CARNEGIE SCIENCE AWARD FOR AN EMERGING FEMALE SCIENTIST, to Xinyan Cui. 2013 CARNEGIE SCIENCE AWARD FOR LIFE SCIENCES, to David A. Vorp.

2013 CARNEGIE SCIENCE AWARD FOR THE ENVIRONMENT, to Robert M. Enick.

2013 CARNEGIE SCIENCE EDUCATOR, to Steven R. Little.

AWARD

FOR

UNIVERSITY/POST-SECONDARY

DEFENSE ADVANCED RESEARCH PROJECTS AGENCY 2013 YOUNG FACULTY AWARD, to Hai Li. DESIGN AUTOMATION CONFERENCE LEADERSHIP AWARD, to Steven P. Levitan.

DREXEL UNIVERSITY 2013-14 ELATE FELLOW, to Anne M. Robertson.

GANNON UNIVERSITY 2013 DISTINGUISHED ALUMNUS AWARD, to Gregory F. Reed.

INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS 2014 FELLOW, to Thomas E. McDermott.

233

INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS FCCM CONFERENCE, named co-author of one of the top 25 most influential papers, to Alexander K. Jones.

INSTITUTE OF INDUSTRIAL ENGINEERS 2013 ALBERT HOLZMAN DISTINGUISHED EDUCATOR AWARD, to Bopaya Bidanda.

INTERNATIONAL SYMPOSIUM ON LOW POWER ELECTRONICS AND DESIGN BEST PAPER AWARD, to Jun Yang.

NATIONAL SCIENCE FOUNDATION FACULTY EARLY CAREER DEVELOPMENT (CAREER) PROGRAM AWARD, to Yiran Chen.

OHIO UNIVERSITY 2013 TEXNIKOI OUTSTANDING ALUMNUS AWARD, to Tamer Ibrahim.

PURDUE UNIVERSITY BOOK OF GREAT TEACHERS AWARD, to Daniel D. Budny.

2013 RESEARCH TO PREVENT BLINDNESS INNOVATIVE OPHTHALMIC RESEARCH AWARD, to George D. Stetten.

RICE UNIVERSITY OUTSTANDING YOUNG ENGINEERING ALUMNI AWARD, to Andrew Schaefer.

SOCIETY OF MINING, METALLURGY AND EXPLORATION PITTSBURGH SECTION 2013 DISTINGUISHED MEMBER AWARD, to Anthony T. Iannacchione.

SOUTH DAKOTA SCHOOL OF MINES AND TECHNOLOGY 2013 MINES MEDAL, to Anna C. Balazs.

UNIVERSITY OF PITTSBURGH INNOVATION IN EDUCATIONAL EXCELLENCE AWARD, to Lance Davidson.

UNIVERSITY OF PITTSBURGH SWANSON SCHOOL OUTSTANDING EDUCATOR AWARD, to Steven P. Levitan.

OF

ENGINEERING

UNIVERSITY OF TEXAS AT AUSTIN J.TINSLEY ODEN FACULTY FELLOW, to John C. Brigham.

WILLIAM KEPLER WHITEFORD PROFESSORSHIP, for outstanding productivity as a senior member of the faculty, to Yadong Wang.

234

Distinguished Lectureships The Bayer Distinguished Lectureship 2014 “Catalysis for Sustainable Energy,” October 9, 2014, Dr. Jens K. Nørskov, Professor of chemical engineering and photon science and director of the SUNCAT Center for Interface Science and Catalysis at Stanford University and SLAC National Accelerator Laboratory “In Search of the Catalyst Genome,” October 10, 2014, Dr. Jens K. Nørskov, Professor of chemical engineering and photon science and director of the SUNCAT Center for Interface Science and Catalysis at Stanford University and SLAC National Accelerator Laboratory

235

2014 Distinguished Alumni In 1964, the Swanson School of Engineering initiated a program to honor the outstanding professional achievements of its graduates. The annual Distinguished Alumni Awards Program continues to be the highlight of the year in the Swanson School of Engineering, and offers the opportunity for alumni, faculty, and students to come together in recognition of the meritorious activities in professional engineering and the allied fields of science, industry, business, public service, and education. The accomplishments of outstanding Pitt Engineering graduates have brought recognition to the University and its academic departments, to the profession, and to the entire Pitt Engineering community.

Swanson School of Engineering Awardees Bruce M. Coull, MD BSCHE ’67, MSCHE ’68, MD ’72 Vice Dean, College of Medicine, Deputy Dean, Clinical Affairs University of Arizona Dr. Bruce Coull is Vice Dean of the College of Medicine, Deputy Dean for Clinical Affairs at the University of Arizona College of Medicine, and Chief Medical Officer of the University of Arizona Physicians. He received his bachelor’s and master’s degrees in chemical engineering, and MD from the University of Pittsburgh, and completed training in Neurology at Stanford University.

Dr. Coull serves on the editorial boards of the Journal of Stroke and Cerebrovascular Diseases (Demos Publications), Stroke (American Heart Association), and the Journal of Rehabilitation and Health (Plenum Publishing). He has contributed more than 90 scientific journal articles to publications including Archives of Neurology, Frontiers of Neurology & Neuroscience, Journal of Comparative Neurology, and Journal of Molecular Neuroscience. His primary research interest lies in the area of acute stroke therapy and secondary prevention. He is also an ad hoc editorial consultant for Annals of Neurology, Biorheology, Circulation, Clinical Hemorheology, Journal of Cerebral Blood Flow and Metabolism, Journal of the Neurological Sciences, and Neurology.

Dr. Coull has been a principal investigator in a number of stroke research projects and clinical trials including “Mechanism of Injury and Repair in Ischemic Stroke,” “Clopidogrel vs Aspirin in Recurrent Stroke (OHSU site),” and the “North American Symptomatic Carotid Endarterectomy Trial (OHSU site).” In addition, he has served as a grant reviewer for the National Institute of Neurological Disorders and Stroke (NINDS), and other granting institutions.

Dr. Coull is a Diplomate of the National Board of Medical Examiners and has received numerous honors and awards including Neurology Residency Faculty Teaching Award at the University of Arizona (20102011 and 2009-2010); Best Doctors in America (2007-2008); Chair of NIH- National Institute of Neurological Disorders and Stroke (NINDS) Neurological Sciences and Disorders K (NSD-K) Committee (2003-2007); Fellow, American Heart Association (2007); William M. Feinberg, MD Endowed Chair in Stroke Research (2005), among others. In 2005 he received the Distinguished Alumni Award for Swanson School’s Department of Chemical and Petroleum Engineering.

236

James M. Coull BSCE ’57 Consultant, J. M. Coull, Inc. Mr. Coull has over forty years of management experience in construction and development throughout New England. He is presently a consultant to J. M. Coull, Inc., a company he founded in 1984. The business specializes in the design and construction of facilities for technology industries located in Northeast region. Annual billings vary from fifty to sixty million dollars with many repeat clients. A partial list of projects may be found on the company website at www.jmcoull.com.

Prior to founding his present company, Mr. Coull spent eight years as CEO of another large local industrial construction firm. In addition to his work for J. M. Coull, Inc. Mr. Coull was a partner in the development of a 75 acre industrial park in Ayer, Massachusetts, and is currently a partner in a 127 acre industrial development in Sutton, MA. Mr. Coull received a bachelor’s degree in civil engineering from the University of Pittsburgh and has served on a number of public and private boards including those of the Massachusetts High Technology Council, was president of the Associated Builders and Contractors of Massachusetts, served on the Governor’s Environmental Fees and Advisory Committee, and was the vice chairman of the Massachusetts Port Authority board of directors for eleven years. In 2004 he received the Distinguished Alumni Award for Swanson School’s Department of Civil and Environmental Engineering.

Departmental Awardees Bioengineering: Madhavan Lakshmi Raghavan PhD ‘98 Professor and Director of Graduate Studies in Biomedical Engineering University of Iowa Madhavan Lakshmi Raghavan is a Professor and Director of Graduate Studies in Biomedical Engineering at University of Iowa. He is a 1998 PhD graduate in bioengineering from Pitt. He grew up in India where he obtained his Bachelor’s degree in Mechanical Engineering from Coimbatore Institute of Technology.

Upon moving to USA, he joined the Pitt Bioengineering Program as a doctoral candidate in 1993. At Pitt, he pursued research on aneurysms - abnormal dilations of arteries in the abdomen - under the guidance of Professor David Vorp in his Vascular Biomechanics Laboratory within the division of Vascular Surgery.

Upon graduation from Pitt Bioengineering in 1998, he worked as a research scientist in the Division of Vascular Surgery at Dartmouth Hitchcock Medical Center, Lebanon, NH. Since 2000, he has been a faculty in the Department of Biomedical Engineering at University of Iowa. In 2012, he was appointed Professor and Director of Graduate Studies for his Department.

As a professor, Dr. Raghavan teaches courses ranging from basic engineering to advanced bioengineering. In his Biomechanics of Soft Tissues Laboratory, graduate students and medical fellows train and conduct research on understanding and treating diseases of the heart and the lungs. Ongoing projects in his lab include the development of computational modeling approaches to diagnosing severity of brain aneurysms and the design of a minimally invasive heart valve prosthesis assembled using a novel biomaterial. He serves on review panels for the National Institutes of Health and currently chairs the University of Iowa Information Technology Advisory Committee. The most recent graduating class from his department honored him for his “Excellence in Teaching and Dedication to Student Success.” He is the Robert and Virginia Wheeler Faculty Fellow of Engineering and was recently named a Fulbright Scientific Mobility Distinguished Chair by the Fulbright Foundation.

237

Sanjana and Madhavan Raghavan live in Iowa with their son, Kaushik and daughter, Deeksha.

Chemical and Petroleum Engineering: Mary T. Zeis BSCHE ‘78 Retired Associate Director of Research & Development Proctor & Gamble Co. Mary T. Zeis is retired from Procter & Gamble Co. after a 31- year career in which she advanced to Associate Director of Research & Development. Mary is a summa cum laude graduate from the University of Pittsburgh in 1978 with a Bachelor of Science in Chemical Engineering. She started at P&G as an engineer in Laundry & Cleaning Product Development. She helped launch Tide with Bleach laundry detergent and the Ultra Dawn, Joy, and Ivory dishwashing liquids products in the United States. In the early 1990s, Ms. Zeis oversaw dishwashing liquids product development in North and South America. In the late 1990s through the late 2000s, Ms. Zeis worked on global programs in Oral Care, Baby Care, and Corporate R&D. Ms. Zeis is currently a Technical Consultant with YourEncore, a network of retired scientists and engineers providing clients with proven experience to help accelerate their pace of innovation.

Ms. Zeis has strong family ties to the University of Pittsburgh engineering program. Her husband, Chuck Bleil, holds a degree in chemical engineering while her brother, Gregory Zeis, has a degree in materials science engineering, and her niece, Kylie Zeis, is a first year student in the Swanson School of Engineering.

Ms. Zeis has been a member of the Visiting Committee in the Department of Chemical & Petroleum Engineering since the early 1990s, and is currently serving as the Vice President of Outreach for the Pittsburgh Section of the Society of Women Engineers. She also represented the Swanson School of Engineering on the Executive Women’s Panel during Homecoming Weekend in 2011.

Civil and Environmental Engineering: Joseph J. Szczur BSCE ‘84 District Executive PennDot Joseph J. Szczur has been the District Executive in PennDOT Engineering District 12 since March 2004.

Mr. Szczur is a graduate of the University of Pittsburgh-Johnstown in 1984 with a degree in Civil Engineering Technology. He is responsible for nearly 800 employees covering Southwestern Pennsylvania including the four counties of Westmoreland, Washington, Greene and Fayette, at an operational budget of $300 million annually.

Under Mr. Szczur’s leadership the District was certified in ISO 9001 Project Delivery which gained national recognition and ISO 14001 Environmental. Mr. Szczur is also a graduate of American Association of State Highway and Transportation Officials (AASHTO), Leadership and Advanced Leadership Academies in Indianapolis, where he served as an instructor for strategic planning for the Academies for four years. Mr. Szczur serves on the University of Pittsburgh Advisory Visiting Committee and is the Chairman of PennDOT’s District Executive Council.

He and his wife, Lisa, have three children: Josh (attended West Point Military Academy for 2 1/2 years, and graduated from Shippensburg University and is a certified sporting clay instructor at Seven Springs); Bryan (graduated from Pitt in spring 2013 with a BSBA and now is a 2nd Lieutenant in the U.S. Army,

238

currently on active duty at Fort Leonard Wood, Missouri), and Katie Jo (junior at Juniata College majoring in Health Sciences and Business Management, and captain of the soccer team).

Mr. Szczur’s extended family holds strong ties to the University of Pittsburgh. His wife Lisa is a 1986 graduate of the University of Pittsburgh-Johnstown with a BS in Secondary Education and a Master’s Degree in Education from St. Francis University. Additionally: • • • • • • •

Father, John is a 1949 graduate with a BS in Mechanical Engineering Brother, John is a 1980 graduate of Pitt-Johnstown with BA in Business Economics Sister, Constance is a 1974 graduate with BS in Nursing and is a retired (2012) US Lieutenant Colonel Sister, Kathleen is a 1975 graduate with a BS in Math and received her MBA from Katz Business School in 1981 Sister, Maria is a 1978 graduate with BS in Child Development and a 1980 graduate with a Masters of Education in Special Education Brother, Tim attended Pitt-Johnstown for two years before graduating from Point Park College in 1987 Daughter, Katie Jo, plans to pursue her Master’s Degree at the University of Pittsburgh in Health and Rehabilitation Science with a concentration in Wellness and Human Performance as part of the School of Health and Rehabilitation and the Department of Sports Medicine and nutrition

Electrical and Computer Engineering: Dr. Donald H. Gillott BSEE ’56, MSEE ’59, PhD ‘64 Retired Dean, College of Engineering and Computer Science Sacramento State University of California Dr. Donald H. Gillott has devoted his career to higher education and community leadership roles. His career in higher education focused on University Administration with special emphasis on Engineering and Computer Science education and on improving the status of young men and women through education. He placed special emphasis on increasing the enrollments of women and ethnic minorities in science and engineering where they are usually sadly underrepresented.

A graduate of the Connellsville High School class of 1949, Dr. Gillott attended St. Vincent College in Latrobe, Pa. prior to transferring to the University of Pittsburgh where he received BS, MS, and PhD degrees in electrical engineering. After attaining his PhD, he served as an associate professor at Pitt for five years; then in 1968 he accepted the position of Chairperson of Electrical and Electronic Engineering at Sacramento State University in California. In 1976, after a national search, he was appointed to the position of Dean of the College of Engineering and Computer Science, the position he held until his retirement in 1993.

Dr. Gillott was one of the main architects in developing the State of California Mathematics, Engineering, Science Achievement (MESA) program, which gained national recognition and is credited with playing a major role in significantly increasing the enrollment of young men and women from these underrepresented groups. He has received a MESA California Statewide award in recognition of outstanding service as Faculty Sponsor of the Sacramento State University’s MESA Center, and the Centennial medal for extraordinary achievement by the International Institute of Electrical and Electronic Engineering.

In 1993, the California State Legislature passed a special resolution upon Dr. Gillott’s retirement as Dean, acknowledging his years of dedicated service to the citizens of the State of California. The resolution

239

honors Dr. Gillott for his “leadership in developing plans for a new Engineering and Computer Science building complex, including his leadership in a successful $5,000,000 fundraising campaign to support the new facility.” Faculty, students, and alumni of the College of Engineering and Computer Science also presented Dr. Gillott with an award honoring outstanding service as Dean and “the many contributions of Dr. Gillott to the success of that Academic Unit.”

Dr. Gillott was born in Connellsville, Pa. in 1931. He and his wife Betty were married in Greensburg, Pennsylvania in 1957 and are the proud parents of three children, Donna Louise Gillott Monsoor, Dr. Douglas Louis Gillott, and Dennis Louis Gillott; and five grandchildren, Amanda and Dylan Gillott, Elizabeth and Ian Monsoor, and Zachary Gillott.

Industrial Engineering: Jamy P. Hall BSIE ‘85 Chief Executive Officer Ford Component Sales, LLC, Ford Motor Company Jamy P. Hall is president and chief executive officer, Ford Component Sales, LLC, a wholly owned subsidiary of Ford Motor Company. In this capacity she has profit and loss responsibility for component sales to other OEM’s and the aftermarket. Prior to her current position, Ms. Hall was director of the Global Service Business Office, Ford Customer Service Division where she developed business plans and strategies to drive global growth. Before moving back to the Customer Service Division, Ms. Hall was director, Dealer Development where she was responsible for assisting qualified dealer candidates in finding and financing dealership investment opportunities. She later was director of North American Business Development for Ford Customer Service Division then moved to Lincoln Mercury as Regional Manager – Detroit Region, responsible for the sale of Lincoln and Mercury cars and trucks in Michigan, Northern Ohio and Northern Indiana.

Ms. Hall joined Ford Motor Company in 2001 from Case-New Holland Corporation where she was senior director of Global Commercial Services and OEM Sales. She also worked in various marketing and engineering positions at Navistar International and General Motors Corporation.

Born in New York, she has a bachelor’s degree in industrial engineering from the University of Pittsburgh and a master’s degree in Marketing from the University of Chicago. In 2002, she received the National Women of Color Technology Award, and was recognized in Black MBA magazine’s top forty under forty executives. Ms. Hall is a member of the Howard University School of Business Board of Visitors, and a board member of Arizona State University’s School of Business Certificate in Entrepreneurs and Leaders program. She is also a member of the Executive Advisory Council for the Automotive Women’s Alliance Foundation, and participates in a host of other organizations and philanthropic initiatives.

Mechanical Engineering and Materials Science: Lloyd Yates BSME ‘82 Executive Vice President Regulated Utilities, Duke Energy Lloyd Yates is executive vice president of Regulated Utilities for Duke Energy, the largest electric power company in the United States which supplies and delivers electricity to approximately seven million customers in the Southeast and Midwest. He is responsible for the profit/loss, strategic direction and performance of the company’s regulated utilities in six states. This includes rates and regulatory initiatives, state and local government relations, economic development, community affairs, integrated

240

resource planning and wholesale power. Mr. Yates is also responsible for federal government affairs, as well as environmental and energy policy at the state and federal levels.

Previously, Mr. Yates served as executive vice president of Customer Operations for Duke Energy, where he led the transmission, distribution, customer services, gas operations and grid modernization functions to approximately 7.2 million electric customers and 500,000 gas customers.

Mr. Yates has more than 30 years of experience in the energy industry, including the areas of nuclear and fossil generation, and energy delivery. He served as president and chief executive officer for Progress Energy Carolinas from July 2007 until the Duke Energy/Progress Energy merger in July 2012. After serving for more than two years as senior vice president of Energy Delivery for Progress Energy Carolinas, Mr. Yates served as vice president of transmission services for Progress Energy Carolinas. He joined Carolina Power & Light in 1998 and served for five years as vice president of fossil generation.

Prior to joining Progress Energy, he worked for PECO Energy for 16 years in several line operations and management positions.

Mr. Yates earned a Bachelor of Science degree in mechanical engineering from the University of Pittsburgh and a Master of Business Administration degree from St. Josephâ&#x20AC;&#x2122;s University in Philadelphia, Pa. He completed the Advanced Management Program at Wharton University of Pennsylvania and the Executive Management Program at Harvard Business School.

Mr. Yates currently serves as a director for Marsh & McLennan Companies Inc., a global professional services firm, and holds various positions on community, state and industry boards. He has also served as a board member for WakeMed Health and Hospitals.

Mr. Yates and his wife, Monica, have two daughters.

241

SWANSON SCHOOL OF ENGINEERING ENDOWMENTS (Principal Only) End of Fiscal Year (June 30)

120,000,000

Department School

100,000,000

80,000,000

60,000,000

40,000,000

20,000,000

2014

2013

2012

2011

2010

2009

2008

2007

0

Book Value

2007

2008

2009

2010

41,092,319

36,235,873

41,602,595

49,103,429

56,409,165

68,244,024

88,575,046

90,557,305

DEPARTMENT

3,968,031

11,354,712

11,524,754

12,634,827

12,364,211

16,316,237

11,596,480

11,890,259

BOOK VALUE

45,060,350

47,590,585

53,127,349

61,738,256

68,773,376

84,560,261

100,171,526

102,447,564

MARKET VALUE

97,514,542

96,299,289

78,028,549

92,001,960

115,212,739

129,191,347

152,345,097

173,506,585

SCHOOL

242

2011

2012

2013

2014

Advisory Groups School of Engineering Board of Visitors TRUSTEE MEMBERS *Roberta (Robbi) A. Luxbacher Vice President, Industrial and Wholesale ExxonMobil Fuels Marketing Co. John A. Swanson President Swanson Analysis Services, Inc. *Stephen R. Tritch Retired Chairman Westinghouse Electric Company *Thomas J. Usher Chairman Marathon Petroleum Corporation REGULAR MEMBERS *Robert O. Agbede President and CEO Chester Engineers

*Francis J. Kramer President and CEO II-VI Incorporated Frank L. Lederman Retired Vice President and CTO Alcoa Inc. *Nick J. Liparulo Senior Vice President Westinghouse Nuclear Services *Robert H. Luffy Former President and CEO American Bridge Company *Robert v.d. Luft Retired Chairman Entergy and Dupont Intâ&#x20AC;&#x2122;l *Richard J. Madden Founder, Future Fund

*James J. McCaffrey Senior Vice President â&#x20AC;&#x201C; Sales CONSOL Energy Sales Company

David L. Brown Chief Market Strategist Sabrient Systems

*Gerald E. McGinnis Retired Chairman and Founder Respironics Inc.

Stephen W. Director Provost Northeastern University

*David L. Motley Consultant

*John A. Jurenko Retired Vice President Adtran, Inc. *Edward F. Kondis Retired Vice President Mobil Corporation

*Barry J. Wetzel Retired President and CEO Clark Screw Machine Products Co.

TRUSTEE EMERITUS MEMBERS #*George A. Davidson, Jr. Retired Chairman, Dominion #*Paul E. Lego Executive Associates #*Frank E. Mosier Mosier Enterprises, Inc.

*John C. Mascaro Chairman Mascaro Construction Company, LP

*David K. Bucklew Vice President, Sales Americas Region Eaton Corporation

*Wilson J. Farmerie Retired Chairman RedZone Robotics, Inc.

*Kenneth S. Smialek Private Investor *Humberto Vainieri President Vainieri Consulting

*John W. Pavia Robert F. Savinell George S. Dively Professor of Engineering CASE Western Reserve University *Jack W. Shilling Retired Executive Vice President, Strategic Initiatives and Technology and Chief Technology Officer Allegheny Technologies

243

*Alumnus +Former Trustee #Trustee Emeritus

Departmental Visiting Committees Bioengineering

Chemical and Petroleum Engineering

Joe Argyros Senior Vice-President, Operations ALung Technologies, Inc.

Nick Liparulo, Chair Vice President of Engineering Services Westinghouse Electric Company

Scott Berceli, MD, PhD Assistant Professor of Surgery University of Florida College of Medicine

Mark Dubnansky Operations Manager Manufacturing & Distribution Springdale Plant PPG Industries, Inc.

Eugene Eckstein, PhD Professor and Chairman Department of Biomedical Engineering University of Memphis

Dr. Karl W. Haider Innovation Manager New Technologies Group Bayer MaterialScience LLC

Alan D. Hirschman, PhD Professor Bioengineering Department Swanson School of Engineering University of Pittsburgh

Dr. Bryan Morreale Focus Area Lead Materials Science & Engineering U.S. D.O.E. National Energy Technology Laboratory

Dr. Mir Imran Chairman, InCube Labs LLC Chairman, Modulus, Inc. Managing Director, InCub Ventures LP

Dr. Dale Keairns Executive Advisor Booz Allen Hamilton

Larry V. McIntire, PhD Wallace H. Coulter Chair The Wallace H. Coulter Department of Biomedical Engineering Georgia Tech and Emory University

Robert K. Reinhart Director of Engineering Controls Link, Inc. Christopher Roberts Dean Samuel Ginn College of Engineering Auburn University

Wolf W. von Maltzahn Professor of Biomedical Engineering Rensselaer Polytechnic Institute

Dr. Jennifer Sinclair Curtis Professor Chemical Engineering University of Florida

John Watson, PhD Director/Professor Department of Bioengineering University of California/San Diego

Larry C. Smith Manager, Drafting & Design Operations Manager, Ice Condenser Engineering Westinghouse Electric Company

Dr. Hal Wrigley President Knightsbridge Biofuels Ecogy Biofuels

244

Mary T. Zeis Associate Director - Retired Sharon Woods Technical Center The Procter & Gamble Company

Charles M. Russell Senior Vice President (Retired) Michael Baker Jr. Inc. Dan Slagle President Nichols & Slagle Engineering, Inc.

Civil and Environmental Engineering

Lester Snyder, III President and CEO i+icon USA, LLC

John M. Barsom President Barsom Consulting, Ltd.

Joseph Szczur District Executive PennDOT District 12-0

Victor Bertolina President, Engineering SAI Consulting Engineers, Inc. Nick Burdette HDR Engineering, Inc.

Electrical and Computer Engineering

Jeff Campbell Vice President Michael Baker Corp.

Mr. Graham Cable Director, Information & Control Systems Westinghouse Electric Company

Mike Dufalla JMT Engineering

Dr. Kenneth F. Cooper Retired; formerly Manager of Process and Control Technology; Westinghouse Electric Company

Arthur G. Hoffmann Vice President Gannett Fleming, Inc.

Dr. Jeffrey Donne Senior Manager Robert Bosch, LLC – North American R&D Center

Werner C. Loehlein, Chief, Water Management Branch U.S. Army Corps of Engineers

Stephen Heilman, MD Founder and CEO Lifecor

John T. Lucey, Jr. Executive Vice President Nuverra Environmental Solutions

Mr. Tom Mino CEO Reflex Photonics Inc.

Robert H. Luffy (Retired) President and CEO American Bridge

Mr. John W. Pavia SSOE Board of Visitors Engineering Consultant Retired: former General Manager – Engineering United States Steel Corp.

Michael O’Connor Parsons Brinckerhoff Margaret A. Pelcher Senior QHSE Engineer Paul C. Rizzo Associates

245

Mr. Michael Pietropola Vice President of Network Core Engineering and Planning AT&T

Ms. Patricia Kelly Lee President Toolkit

Mr. Rich Stinson President Power Distribution Americas Eaton Corporation

Mr. William Mallin General Counsel Eckert Seamans

Industrial Engineering

Mr. Douglas R. Rabeneck Retail Consulting Practice Accenture

Ms. Tandy A. Bailey District Industrial Engineering Manager UPS

Mr. Stan C. Sliwoski - Emeritus Senior Consultant UPS Professional Services

Mr. Glenn M. Foglio President Graciano Corporation

Mr. Nishan Vartabedian Executive Vice President (Retired) Fidelity Investments

Mr. Richard C. Frank General Manager - Business Development Strategic Planning & Business Development United States Steel Corporation â&#x20AC;&#x201C; Retired

Mr. J. (Buster) Weinzierl- Emeritus R&D Coatings, Inc.

Mechanical Engineering and Materials Science

Mr. Matthew A. Gardner General Manager, North America Propulsion & Controls Locomotives and Equipment Bombardier

Mr. James Kimbrell Chief Technologist L-3 Communications, Brashear Division

Mr. Roman Hlutkowsky - CHAIR Principal The Hlutkowsky Group ` Mr. George Huber â&#x20AC;&#x201C; Emeritus Professor of Public Health Practice Associate Dean for Public Policy Graduate School of Public Health

Mr. Wilson J. Farmerie (Retired) Chairman RedZone Robotics Mr. Bernard Fedak Vice President Kvaerner

Mr. John Innocenti Senior Vice President and Chief Operating Officer UPMC Shadyside Hospital

Mr. David M. Kitch, PE Consultant David T. Marinaro, BSME (Retired)

Ms. Caroline M. Kolman, P. E. Managing Director Healthcare Navigant

Mr. Fred Harnack General Manager Environmental Affairs United States Steel Corporation

Mr. Francis Kramer President and COO II-VI Inc.

246

Raymond J. Labuda (Retired) Vice President of Tire Technology Hankook Tire Company John E. Goossen (Retired) Director Science & Technology Department Westinghouse Electric Company Dr. David P. Hoydick USX/US Steel Technical Center Mr. Theodore (Ted) F. Lyon Managing Director Hatch Dr. C. Edward Eckert President Apogee Technology, Inc. Dr. Jack Shilling (Retired) Executive Vice President Strategic Initiatives and Technology and Chief Technology Officer Allegheny Technologies Mr. R. Rumcik, President Elwood Quality Steels Co.

247

Diversity Advisory Committee Dr. Leonard Casson, Chair Civil and Environmental Engineering

Berook Alemayehu President, Engineering Diversity Graduate Students' Association (EDGSA)

Dr. Sylvanus Wosu (ex-officio) Associate Dean for Diversity

Amy Howell President, Scientists, Engineers and Mathematicians for Service (SEMS)

Dr. Larry Shuman (ex-officio) Senior Associate Dean for Academic Affairs

Jingming Chen President, Graduate Women Engineering Network

Ms. Alaine Allen (ex-officio) Director, PECAP EXCEL Ms. Cheryl Paul (ex-officio) Director, Freshman Program

Kerianne Chen President of Asian Scientists and Engineers

Dr. Steve Jacobs Electrical and Computer Engineering

University Members

Dr. Badie Morsi Chemical and Petroleum Engineering

Breanne Caution OAFA

Dr. Steven Abramowitch Bioengineering

Carol W. Mohamed, Director The Office of Affirmative Action, Diversity and Inclusion

Dr. Gerald Meier Mechanical Engineering and Material Science

External Members

Dr. Paul Leu Industrial Engineering

Ms. Laura Trybend Manager of Corporate Recruiting PPG Industries

Student Organization Members

Mr. Charles Toran Sci-Tek Environmental Services Co

Robert Timmons President, NSBE

Mr. Robert J. Wilson Smith Barney

Dhanalakshmi (Dhanu) Thiyagarajan President, SWE Heather Meloy Gorr President, EGSO Daniel Mercader Adrian Garcia Co- President SHPE

248

2014 Bioengineering Directory Name Abramowitch, Steven Aggarwal, Sowmya Aizenstein, Howard Alba, Nicholas Alemayehu, Berook Allen, Robert Almarza, Alex Arazawa, David Ataai, Mohammad Awada, Hassan Ayers, Christopher Badylak, Stephen Bae, Kyong Tae Balaban, Carey Balmert, Stephen Banerjee, Ipsita Bansbach, Heather Barker, Jeffrey Barone, William Batista, Aaron Bauman, Matthew Bayer, Emily Beniash, Elia Beschorner, Kurt Bickta, Janelle Blose, Kory Bly, Margie Boninger, Michael Borovetz, Harvey Brienza, David Brigham, Johnny Browe, Daniel Brown, Andrew Brown, Bryan Candiello, Joseph Carey, Lisa Catt, Kasey Cavanaugh, Brian Cesnalis, Daniel Chakraborty, Dev Cham, Rakie Chambers, April Chaya, Amy Chen, Chieh-­‐Li Chen, Chienwen Chen, Jingming Chin, Adam Chou, Da-­‐Tren Cinibulk, Emma Cirinelli, Lacey Cleary, Deborah Cooper, Gregory Cooper, Rory Corcoran, Timothy Cui, Xinyan Damle, Sameer Datta, Moni Davidson, Lance de Kam, Digna Deasy, Bridget Debski, Richard DeCenzo, Diann Degenhart, Alan DeWillie, Brian Ding, Dan Ding, Zhijie Doko, Arta Downey, John Du, Zhanhong (Jeffrey) Dziki, Jenna Easley, Deanna Eason, Hunter Edington, Colin Eles, James Evans, Caroline Farraro, Kathryn Farrokhi, Shawn Fatykhov, Ilnar Faulk, Denver Federspiel, William Fisher, James Flesher, Sharlene

Office Address CNBIO 409 BENDM 302 STERL 253 BST3 5065 BST3 4039 BENDM 421/422/425 SALK 566 MGOWN 210 BENDM 1249 BENDM 414 CNBIO 306 BSP II 319 PRESB S3950 EEINS 107 CNBIO 405 BENDM 1249 FRTOW 4044 CNBIO 306 CNBIO 330 BST3 4074 KEY 220 BENDM 440 SALK 589 BENDM 302 BSTWR E1228 CNBIO 407B BENDM 848 KAU 901 CNBIO 312 BAKSQ 401 BENDM 936 CNBIO 331 SALK 598 BRDG2 300 BENDM G-­‐11 BRDG2 300 BST3 5065 BST3 5066 CNBIO 306 PRESB S4771 BENDM 404 office, BENDM 405/437/439 lab BENDM 441 SALK 598 EEI 835 BRDG2 236 SALK 589 SALK 566 BENDM 848 CNBIO 331

Phone (412) 624-­‐7924 (412) 251-­‐8166 (412) 383-­‐5452 (412) 383-­‐5394 (717) 880-­‐2550 (412) 648-­‐2060 (412) 383-­‐9998 (412) 624-­‐9648 (412) 624-­‐6445 (412) 624-­‐4055 (412) 624-­‐5252 (412) 647-­‐3510 (412) 624-­‐5749 (412) 383-­‐7460 (412) 624-­‐2071 (412) 624-­‐6445 (412) 648-­‐2000 (412) 383-­‐5394 (412) 624-­‐6445 (412) 648-­‐0108 (412) 624-­‐7577 (412) 624-­‐0462 (412) 624-­‐5321 (412) 383-­‐7157 (412) 648-­‐6975 (412) 624-­‐4725 (412) 624-­‐6383 (412) 624-­‐9047 (412) 624-­‐4830 (412) 648-­‐2000 (412) 624-­‐5273 (412) 624-­‐9661 (412) 624-­‐5272 (412) 383-­‐9460 (412) 383-­‐9713 (412) 605-­‐1553 (412) 624-­‐7227 (412) 624-­‐9898 (412) 624-­‐9825 (412) 624-­‐6445

(412) 624-­‐6445 (412) 648-­‐1943

CNBIO 413 RANGO 7109 FRTOW 5042 MONF NW628 BST3 5063 BENDM 1249 BENDM 1234 BST3 5059

(412) 624-­‐5317 (412) 692-­‐5384 (412) 383-­‐6590 (412) 647-­‐3730 (412) 383-­‐6672 (412) 624-­‐9630 (412) 624-­‐9630 (412) 383-­‐5820 (412) 624-­‐5446 (412) 624-­‐5500 (412) 648-­‐1638 (412) 648-­‐2000

BSP2 300 CNBIO 405 CNBIO 405 KEY 220 CNBIO 331 FRTOW 5044 CNBIO 237 BSTWR E1654 KAU 202 BST3 5057 BENDM 437/439 CNBIO 306 CNBIO 332

(412) 648-­‐1943 (412) 822-­‐3691 (412) 624-­‐7799 (412) 383-­‐8939 (412) 624-­‐6445 (412) 624-­‐6445 (412) 624-­‐9261 (412) 624-­‐9842 (412) 648-­‐2156

BST3 5065 CNBIO 439/440 CNBIO 332 FRTOW 6076 BENDM 1234 BRDG2 300 BENDM 302 MGOWN 219 MGOWN 245

(412) 383-­‐9786 (412) 648-­‐2000 (412) 383-­‐6645 (412) 799-­‐4995 (412) 383-­‐9499 (412) 648-­‐9633

249

E-­‐mail sabram@engr.pitt.edu soa19@pitt.edu aizen@pitt.edu nia16@pitt.edu bea22@pitt.edu raa32@pitt.edu aja19@pitt.edu dta9@pitt.edu ataai@engr.pitt.edu hka7@pitt.edu caa28@pitt.edu badylaks@upmc.edu baek@upmc.edu cbalaban@pitt.edu scb22@pitt.edu ipb1@pitt.edu hmb47@pitt.edu jwb52@pitt.edu wbb8@pitt.edu abatista@engr.pitt.edu mbauman@gmail.com eab85@pitt.edu ebeniash@pitt.edu beschorn@pitt.edu jab234@pitt.edu blosekj@upmc.edu mkb49@pitt.edu boninger@pitt.edu borovetzhs@upmc.edu dbrienza@pitt.edu brigham@pitt.edu dpb20@pitt.edu brownaj3@upmc.edu bnb9@pitt.edu jec40@pitt.edu careyle@upmc.edu kac200@pitt.edu bmc66@pitt.edu dpc30@pitt.edu dpc10@pitt.edu rcham@pitt.edu ajcst49@pitt.edu aec28@pitt.edu chc166@pitt.edu chc88@pitt.edu jic74@pitt.edu arc112@pitt.edu dac105@pitt.edu ecc14@pitt.edu lac91@pitt.edu clearyda@upmc.edu greg.cooper@chp.edu rcooper@pitt.edu corcorante@upmc.edu xic11@pitt.edu ssd13@pitt.edu mkd12@pitt.edu ldavidson@engr.pitt.edu did25@pitt.edu bmdst10@pitt.edu genesis1@pitt.edu ddecenzo@pitt.edu add19@pitt.edu bcd14@pitt.edu dad5@pitt.edu zhd3@pitt.edu akd25@pitt.edu jed92@pitt.edu zhd7@pitt.edu jld141@pitt.edu dce14@pitt.edu hse1@pitt.edu cde15@pitt.edu jre35@pitt.edu csc18@pitt.edu kff7@pitt.edu farrokhi@pitt.edu ilf3@pitt.edu faulkdm@upmc.edu federspielwj@upmc.edu fisherj4@upmc.edu snf12@pitt.edu

Name Flowers, Jonquil Frankowski, Brian Friberg, Thomas Furman, Joseph Galeotti, John Gandhi, Neeraj Gao, Jin Gartner, Mark Gau, David Gau, David Gealey, Dan Gerlach, Jorg Gerth, Rebecca Ghuman, Harman Gilbert, Thomas Godlove, Jason Goh, Saik Kia Goitz, Robert Gronenborn, Angela Guaragno, Michelle Gurleyik, Kilichan Gustafson, Jonathan Hachim, Daniel Hagandora (Kunkle), Catherine Haggerty, Agnes Hamschin, Brandon Haney, Jamie Hartman, Robert Hermann, John Hirschman, Alan Hobson, Christopher Hofer, Heidi Hoff, Richard Hokanson, James Hong, Daeho Hong, Dandan Horvath, Samantha Hosmer, Andrew Hostler, David Huard, Johnny Hung, Chuh-­‐Chih (George) Hung, Tin-­‐Kan Huppert, Theodore Ibrahim, Tamer Ichikawa, Takehiko Iraqi, Arian Ishikawa, Hiroshi Iturralde, Pablo Jackson, Timothy Jagadisam, Udaya Jallah, Zegbeh Jamiolkowski, Megan Jan, Ning-­‐Jiun Jeffries, Eric Jeffries, Richard Jian, Xiao Jiang, Chang Jimenez, Maritza Johnson, Noah Joy, Marion Kageman, Lawrence Kameneva, Marina Karim, Helmet Keane, Timothy Kellum, John Kemp, Alicia Kennedy, Scott Khanna, Sanjeev Khanwilkar, Pratap Kim, Hye Young Kim, Jung Hwan Kim, Kang Kim, Kwang Kim, Seong-­‐Gi Kim, Sung-­‐Min (Terry) Klein-­‐Seetharaman, Judith Knight, Katrina Kolarcik, Christi Kolling, Alicia Kozai, TK Krawiec, Jeffrey Krishnamurth, Narayan Kumta, Prashant Kunjukunju, Sangeetha Kuruba, Ramalinga

Office Address CNBIO 405 MGOWN 210 EEINS 818 EEINS 500 BENDM 761/CMU A427 Newell Simon Hall EEINS 108 BENDM 421 Ension, Inc. 240 William Pitt Way, Pittsburgh, PA 15238 CNBIO 237 CNBIO 306 CNBIO 306 MGOWN 200 CNBIO 306 BRDG2 300 RANGO 3512 BST3 4039 BENDM 1249 KAU 911 BST3 1051 BENDM 1250 BENDM 409 CNBIO 306 BRDG2 323

Phone (412) 383-­‐9624 (412) 647-­‐2214 (412) 647-­‐2115 (412) 624-­‐9931 (412) 647-­‐3076 (412) 624-­‐7196 (412) 383-­‐9598 (610) 883-­‐0348 (412) 624-­‐1079 (412) 383-­‐7150 (412) 692-­‐6400 (412) 648-­‐3379 (412) 624-­‐6445 (412) 605-­‐3324 (412) 648-­‐9959 (412) 648-­‐9633 (412) 648-­‐8071 (412) 328-­‐0750

BSTWR E1417 BENDM 1140 CNBIO 439/440 BSTWR E1641 BST3 5065 BENDM 325

(412) 648-­‐3270 (412) 624-­‐7993 412) 333-­‐9789 (412) 648-­‐6666 (412) 383-­‐6672 (412) 624-­‐1177

BRDG2 239 BRDG2 323

(412) 624-­‐5503 (724) 448-­‐2865

BENDM 414 598 Salk Hall BENDM 761/CMU A427 Newell Simon Hall CNBIO 306 IROQU 400A RANGO 4151 BENDM 302 CNBIO 411 PRESB B800 BST3 1038 BST3 5059 BENDM 402 EEINS 835 BAKSQ 402 BST3 5065 108 Eye and Ear Institute CNBIO 330 BRIDG 226 EEI 930 BENDM 421/422/425 MGOWN 226

(412) 924-­‐9372

CNBIO 237 BENDM 302 BENDM 421/422/425 CNBIO 237 EEINS 673 BRDG2 309 CNBIO 306 BRDG2 300 SCAIFE 6B BENDM 302C MGOWN 245 BST3 5065 BENDM 730 BST3 5065 BST3 b014 SCAIF S568 CNBIO 332 MGOWN 159

(412) 624-­‐6445

BST3 2051 CNBIO 330 BST3 5065 BENDM 439 BST3 5065 CNBIO 407B BST3 b014 BENDM 849/416/418/428A BENDM 815 BENDM 402

(412) 383-­‐7325 (412) 624-­‐6445 (412) 383-­‐6672 (412) 624-­‐8503

(412) 624-­‐9931 (412) 647-­‐4113 (412) 692-­‐7822 (412) 624-­‐9896 (412) 726-­‐8459 (412) 383-­‐6946 (412) 647-­‐5645 (412) 801-­‐1692 (412) 624-­‐7488 (412) 624-­‐6445 (412) 648-­‐1943 (412) 624-­‐6445 (412) 325-­‐5177

(412) 624-­‐6445 (412) 624-­‐6455 (412) 648-­‐6409 (412) 624-­‐5281 (814) 598-­‐3998 (412) 647-­‐6966 (412) 624-­‐7279 (412) 624-­‐6445 412) 624-­‐9815 (412) 624-­‐0403 (412) 648-­‐9722 (412) 641-­‐2573 (412) 624-­‐5092 (412) 648-­‐2000 (412) 383-­‐8011

(412) 624-­‐6445 412) 648-­‐3379 (412) 648-­‐0223 (412) 624-­‐9661 (412) 624-­‐9661

250

E-­‐mail jrf71@pitt.edu frankowski8@upmc.edu fribergtr@upmc.edu furman@pitt.edu jmg113@pitt.edu neg8@pitt.edu jig22@pitt.edu mgartner@ension.com dmg40@pitt.edu dmg40@pitt.edu dgealey@pitt.edu jgerlach@pitt.edu rjg35@pitt.edu hsg7@pitt.edu gilberttw@upmc.edu jason.godlove@gmail.com sag93@pitt.edu goitzrj@upmc amg100@pitt.edu mlg111@pitt.edu gurleyik@pitt.edu jag201@pitt.edu djh88@pitt.edu cak80@pitt.edu aeh44@pitt.edu bmh52@pitt.edu jlh76@pitt.edu rah30@pitt.edu jkh30@pitt.edu alh138@pitt.edu cmh127@pitt.edu hrh7@pitt.edu rih12@pitt.edu jim.hokanson@gmail.com dah90@pitt.edu dah57@pitt.edu sjh26@pitt.edu alh142@pitt.edu hostlerdp@upmc.edu jhuard@pitt.edu chh122@pitt.edu tkhung@engr.pitt.edu huppertt@upmc.edu tsi2@pitt.edu tai17@pitt.edu ari16@pitt.edu ishikawah@upmc.edu pai7@pitt.edu trj4@pitt.edu udk3@pitt.edu zcj1@pitt.edu jamiolkowskim@upmc.edu nij14@pitt.edu emj12@pitt.edu rgj4@pitt.edu xiaobing@pitt.edu chj26@pitt.edu rgj4@pitt.edu noj2@pitt.edu mej29@pitt.edu kagemannl@upmc.edu Kamenevamv@upmc.edu hek26@pitt.edu keanetj@upmc.edu kellumjja@ccm.upmc.edu akw20@pitt.edu sdk29@pitt.edu sbk13@pitt.edu prk38@pitt.edu hyk39@pitt.edu juk32@pitt.edu kangkim@pitt.edu kek68@pitt.edu kimsg@pitt.edu suk91@pitt.edu jks33@pitt.edu kmk144@pitt.edu clekolarcik05@gmail.com alk93@pitt.edu tk.kozai@gmail.com krawiecjt@upmc.edu nak54@pitt.edu pkumta@pitt.edu sak132@pitt.edu rak111@pitt.edu

Name Lal, Shubhangi Langhans, Mark Laymon, Charles Ledgerwood, Aaron Lee, Boeun Lee, Kee Won Lee, Randy Leuba, Sanford Li, Xia Little, Steven Liu, Yang LoPresti, Samuel Lotze, Michael Loughlin, Patrick Lowe, Jesse Ludwig, Daniel Luther, Allison Madhani, Shalv Mahboobin, Arash Mahoney, Christopher Maiti, Spandan Malkin, Alexander Mamiya, Hikaru Mance, Nick Mao, Zhi-­‐Hong Marra, Kacey Marsh, Chelsea McClain, Nicole McCullough, Matthew McMahon, Patrick Menegazzi, James Merrill, Zachary Miller, Callie Miller, Mark Miller, Matthew Minteer, Danielle Mirhassani Moghaddam, Deyed Mischel, Jessi Moalli, Pamela Mohammadyani, Dariush Musahl, Volker Nelson, Douglas Oborski, Matthew Ostrowski, Nicole Oudega, Martin Owens, Grace Pal, Siladitya Parise, Erica Park, Sungkyoo Pastrone, Antonio Patel, Meenal Patil, Avinash Patil, Mitali Patzer, Jack Pavlovsky, Nick Peterson, Glenn Pettegrew, Jay Pichamuthu, Jospeh Pickering, Aimee Pinkus, Rose Pinsky, Michael Pitt, Bruce Prest, Travis Prinkey, Jarad Pu, Jiantao Quick (Wilson), Kristen Radocay, Jamie Ramanathan, Madhumati Rao, Jayashree Rasmussen, Rob Rauck, Britta Raval, Shailesh Redfern, Mark (Vice Provost) Relwani, Karuna Revanna Shivaprabhu, Vikas Revanna, Vikas Rinaudo, Antonino Robertson, Anne Rodzwicz, Lindsay Roy, Abhijit Roy, Partha Rubin, J. Peter Sadtler, Patrick Saha, Partha Saldin, Lindsey

Office Address THACK 370 BRDG2 239 PRESB B920 BENDM 437/439 BENDM 1245 BENDM 421 BENDM 400 HCCLB 2.26G BST3 5065 BENDM 440 FOBLD 0000 BRDG2 326 HLMNC G27A BENDM 410/438 SALK 574 CNBIO 439/440 BENDM 437/439 MGOWN 226 BENDM 402 CNBIO 306 CNBIO 207 MGOWN 215 BENDM 1249 CNBIO 306B BENDM 1131 BSTWR W1555

Phone (412) 624-­‐8150 (412) 624-­‐3962 (412) 647-­‐0736 (412) 624-­‐9261 (412) 383-­‐7994 (412) 624-­‐7196 (412) 624-­‐8150 (412) 623-­‐7788 (412) 383-­‐9459 (412) 624-­‐9614 (412) 623-­‐3751

BENDM 302 CNBIO 420/BENDM 1175A CNBIO 331 IROQU 400A CNBIO 331 BST3 5065 BENDM 536 CNBIO 331 BSTWR E1654 BRDG2 326 BST3 4073 MAGEE 0000 BST3 2054 CSMR 200 SALK 1009 PRESB S-­‐B944 CNBIO 306 BST W1452 BENDM 437/439 CNBIO 207 BENDM 437/439 BENDM 1245

(412) 648-­‐1103 (412) 624-­‐0357 (412) 383-­‐1054 (412) 647-­‐7992 (412) 648-­‐1943 (412) 624-­‐8375 (412) 624-­‐9720 (412) 648-­‐1943 (412) 624-­‐6445

(412) 623-­‐5977 (412) 624-­‐9685

E-­‐mail shl88@pitt.edu langhansmt@upmc.edu laymoncm@upmc.edu atl12@pitt.edu bol11@pitt.edu kel55@pitt.edu ral63@pitt.edu leuba@pitt.edu xial@pitt.edu srlittle@pitt.edu liuy@pitt.edu stl40@pitt.edu lotzemt@upmc.edu loughlin@pitt.edu jrl93@pitt.edu drl20@pitt.edu

(412) 624-­‐9261 (412) 648-­‐7634 (412) 624-­‐4240 (951) 642-­‐7282 (412) 624-­‐6445 (412) 624-­‐9674 (412) 383-­‐8924

(412) 621-­‐1440 (412) 605-­‐3265 (412) 383-­‐7472 (412) 624-­‐6828 (412) 624-­‐9784 (412) 383-­‐6575 (412) 624-­‐7279 (412) 383-­‐9713 (412) 624-­‐9898 (412) 624-­‐9661

SALK 598 BENDM 302 CNBIO 309/BNDM 746 BST3 4074 CNBIO 311 PPG 108A CNBIO 405 CNBIO 332 MDART 300 SCAIF 606 FORBS 201 BRDG2 300 BENDM 405 FARP 132 BST3 407 BENDM 151 BENDM 414 CNBIO 333 MGOWN 245

(412) 648-­‐0108 (907) 378-­‐5791 (412) 624-­‐9819

BST3 b016 BENDM 323/763/764/EEINS 110 CNBIO 439/440 BENDM 761/CMU A427 Newell Simon Hall BENDM 302

(412) 624-­‐3141 (412) 624-­‐0784

(412) 624-­‐4705 (412) 967-­‐6509 (412) 624-­‐5317 (412) 648-­‐1943 (412) 315-­‐7193 412) 647-­‐7125 (412) 624-­‐8400 (412) 648-­‐7875 (412) 648-­‐7364 (412) 624-­‐2571 (412) 383-­‐5394 (412) 624-­‐9801 (412) 624-­‐3375 (412) 624-­‐5321 (412) 648-­‐2324

(412) 841-­‐1072 (412) 841-­‐1072 (412) 624-­‐5446 (412) 624-­‐9775 (412) 624-­‐3495 (412) 648-­‐8499 (412) 624-­‐7867 (412) 641-­‐3723 (412) 383-­‐5394 (412) 624-­‐9661 (412) 624-­‐5272

BENDM 408 BENDM 302A SALK 693A CNBIO 308 SCIAF 0000 BST3 4039 BENDM 402 BRDG2 300

251

madhanisp@upmc.edu arm19@pitt.edu cmm237@pitt.edu spm54@pitt.edu alm270@pitt.edu him25@pitt.edu ngm8@pitt.edu maozh@engr.pitt.edu marrak@upmc.edu cam229@pitt.edu mcclanic91@gmail.com mjm188@pitt.edu pmm24@pitt.edu menegazz@pitt.edu zfm1@pitt.edu caj30@pitt.edu mcmiller@wpahs.org mbm35@pitt.edu dmm69@pitt.edu sem162@pitt.edu jlm334@pitt.edu pmoalli@mail.magee.edu dariushm@pitt.edu vom2@pitt.edu dnelson@pitt.edu mjo29@pitt.edu njo2@pitt.edu moudega@pitt.edu geo2@pitt.edu sip16@pitt.edu edp20@pitt.edu sup28@pitt.edu anp133@pitt.edu mjp101@pitt.edu ajp79@pitt.edu msp47@pitt.edu patzer@pitt.edu npp10@pitt.edu glennp@pitt.edu pettergre@pitt.edu jep58@pitt.edu anp79@pitt.edu pinkus@pitt.edu pinskyymr@upmc.edu brucep@pitt.edu tap56@pitt.edu jwpst18@pitt.edu jip13@pitt.edu wilsonk@pitt.edu jradocay@pitt.edu mar168@pitt.edu raoj@upmc.edu rgr10@pitt.edu bmr39@pitt.edu sbr15@pitt.edu redfernms@upmc.edu knr13@pitt.edu vir19@pitt.edu vir19@pitt.edu rinaudo@pitt.edu rbertson@pitt.edu rodzwicz@pitt.edu abr20@pitt.edu proy@engr.pitt.edu jpr5@pitt.edu psadtler@pitt.edu sahap@pitt.edu lsaldin@pitt.edu

Name Samosky, Joseph Schaefer, Andrew Schatten, Gerald Schmidt, Benjamin Schuman, Joel Schwartz, Andrew Sfeir, Charles Shannon, Schohn Shawky, Joseph Shawky, Jospeh Shekhar, Sudhanshu Shroff, Sanjeev Shuman, Larry (Dean) Sigal, Ian Simpson, Richard Sinha, Mantosh Sivek (Daly), Amanda Siviy, Christopher Smalianchuck, Ivan Smith, Matthew Smith, Stephen Snead, Wilton Snyder, Noah Sombric, Carly Sowa, Gwendolyn Sparto, Patrick Stetten, George Stowell, Chelsea Strickler, Zachary Stuckenholz, Carsten Sun, Mingui Tashman, Scott Tchao, Jason Thunes, James Tien, Rex Tobita, Kimimasa Torres-­‐Oviedo, Gelsy Tran, Huong Trout, Jenna Tuan, Rocky Turner, Robert Tyler-­‐Kabaram, Elizabeth Udofa, Imaobong Van Roosmalen, Linda Vargo, Cathy Vasandani, Paresh Vazquez, Alberto Velikokhatnyi, Oleg Veon, William Vijayraghavan, Deepthi Vodovotz, Yoran Vorp, David (Dean Research) Vukotich, Charles Wagner, William Wang, Bo Wang, James Wang, Jihang Wang, Wei Wang, Yadong Waters, Jonathan Weaver, Cassandra Weber, Douglas Weinbaum, Justin Wells, Alan Whitford, Andrew Williamson, Joan Wolf, Matthew Woo, Savio L-­‐Y Wood, Sossena Wu, Jingyao Yang, Guang Yeh, Joanne Yu, Jaesok Yun, Minhee Zhang, Cuiling Zhang, Lin Zhang, Ling Zhang, Xudong Zhao, Guangyi Zhao, Yujuan Zheng, Bin Zhou, Leming Zhu, Yang

Office Address PROF 230 BENDM 1031 MAGEE 0000

Phone (412) 647-­‐5330 (412) 624-­‐5045 (412) 641-­‐1427

EEINS 816 MGOWN 245.09 SALK 623 BENDM G16 BST3 5065 BST3 5065 BENDM 949 CNBIO 307 BENDM 147 EEEI 930 FRTOW 5044 CNBIO 306

(412) 647-­‐2205 (412) 383-­‐7021 (412) 648-­‐1949 (412) 624-­‐9866 (518) 368-­‐2858 (412) 648-­‐9722 (412) 979-­‐1712 (412) 624-­‐2095 (412) 624-­‐9815 (412) 864-­‐2220 (412) 383-­‐6593 (412) 383-­‐5300

BENDM 437/439 108 Eye and Ear Institute EEI 914 CNBIO 439/440 BST3 5065 BST3 5065 BENDM 302 KAU 202 FRTOW 6035 BENDM 407/434 VIA Lab/435 Dark Lab BENDM 412 CNBIO 306 BST3 5065 PRESB B400 RVTECH 0000

(412) 624-­‐9261 (412) 648-­‐3379 (412) 647-­‐2313 (412) 383-­‐9786 (412) 648-­‐9722 (412) 383-­‐5820

CNBIO 207 MGOWN 245.13 RANCH 8121 BENDM 406 CNBIO 333 BENDM 439 BRDG2 221 BST3 4074 PRESB 3705 BAKSQ 400 RST 1300 BENDM 109 BENDM 302 MGOWN 159 BENDM 848 CNBIO 306 BST3 5065 BSTWR W944 CNBIO 412/333 lab/334 lab BAKSQ 401 BRDG2 300 EEI 835 BSTWR E1641 BENDM 761/CMU A427 Newell Simon Hall KAU 202 BENDM 411/412/422/425 MAGEE 3510 BST3 5065 SCAIF S713 CNBIO 410 SCAIF S713 245 McGowan Institute CNBIO 306

(412) 624-­‐6445 (412) 624-­‐6445 (412) 692-­‐9902 (412) 624-­‐2660 (412) 980-­‐5479 (412) 624-­‐9261 (412) 624-­‐3962 (412) 383-­‐5395 (412) 647-­‐6777

CNBIO 405 BST3 1038 BENDM 302 BRDG2 221 BST3 1041 SCAIF 958 BENDM 542 CNBIO 405 BST3 5063 BST3 5059 CSMR 0000 CNBIO 306 BST3 b014 FARP 128 FRTOW 6021 BRDG2 338

(412) 648-­‐2000 (412) 648-­‐7710 (412) 230-­‐7236

(412) 648-­‐1091 (412) 383-­‐6729 (412) 624-­‐7762 (412) 624-­‐4414 (412) 624-­‐5446 (412) 648-­‐9722 (412) 648-­‐9095 (412) 586-­‐3950

(412) 624-­‐6933 (412) 624-­‐9809 (412) 383-­‐6696 (412) 719-­‐5928 (412) 624-­‐7798 (412) 648-­‐9722 (412) 648-­‐3758 (412) 624-­‐5319 (412) 624-­‐6214 (412) 624-­‐5327 (412) 648-­‐9102 (412) 624-­‐9931 (412) 383-­‐1359 (412) 624-­‐7196 (412) 641-­‐4260 (412) 383-­‐6672 (412) 624-­‐4055 (412) 624-­‐9242 (412) 647-­‐8409 (412) 383-­‐9060 (412) 624-­‐2328

(412) 648-­‐9027 (412) 648-­‐8989 (412) 624-­‐4861 (412) 648-­‐9722 (412) 383-­‐5820 (412) 586-­‐3940 (412) 624-­‐9815 (412) 624-­‐6445 (412) 641-­‐2568 (412) 383-­‐6653

252

E-­‐mail jts35@pitt.edu shaefer@ie.pitt.edu pdc@pdc.magee.edu bts9@pitt.edu schumanjs@upmc.edu abs21@pitt.edu csfeir@pitt.edu schohn@pitt.edu jhs35@pitt.edu joe.shawky@gmail.com sus72@pitt.edu sshroff@pitt.edu shuman@pitt.edu ias6@pitt.edu ris20@pitt.edu mks54@pitt.edu ard49@pitt.edu cjs142@pitt.edu ivs4@pitt.edu smithma@pitt.edu shs46@pitt.edu wts4@pitt.edu nrs43@pitt.edu cjs180@pitt.edu gas26@pitt.edu spartopj@upmc.edu stetten@engr.pitt.edu ces98@pitt.edu zas15@pitt.edu cstucken@pitt.edu mrsun@neuronet.pitt.edu tashman@pitt.edu jat122@pitt.edu jrt57@pitt.edu rnt9@pitt.edu kimimasa.tobita@chp.edu gelsyto@pitt.edu htt3@pitt.edu jdm139@pitt.edu tuanr@upmc.edu / rst13@pitt.edu rturner@pitt.edu elizabeth.tyler-­‐kabara@chp.edu iau3@pitt.edu lvanroos@pitt.edu cavargo@pitt.edu pmv4@pitt.edu alv15@pitt.edu olv3@pitt.edu wjv3@pitt.edu dsv1@pitt.edu vodovotzy@upmc.edu vorp@pitt.edu cjv17@pitt.edu wagnerwr@upmc.edu bow8@pitt.edu wanghc@pitt.edu jiw86@pitt.edu wangw4@upmc.edu yaw20@pitt.edu watejhj@upmc.edu clw38@pitt.edu djw50@pitt.edu juw51@pitt.edu wellsa@upmc.edu asw35@pitt.edu jwi100@engr.pitt.edu mhw10@pitt.edu slyw@pitt.edu scw24@pitt.edu jywu90@gmail.com guy9@pitt.edu jiyeh@pitt.edu jay49@pitt.edu yunmh@engr.pitt.edu cuz1@pitt.edu liz37@pitt.edu liz44@pitt.edu zhangx2@upmc.edu guz14@pitt.edu yuz36@pitt.edu zhengb@upmc.edu lzhou1@pitt.edu yaz48@pitt.edu

NAME

ADDRESS

PHONE

FAX

E-MAIL ADDRESS

CHEMICAL AND PETROLEUM ENGINEERING (412)

(412)

Main Office/ Steven R. Little Chair

940 Benedum Hall

624-9614

624- 9639

srlittle@pitt.edu

Mohammad M. Ataai Anna C. Balazs Ipsita P. Banerjee Eric J. Beckman Cheryl Bodnar Ioannis Bourmpakis Andrew Bunger Shiao-Hung Chiang Julie dâ&#x20AC;&#x2122;Itri Robert M. Enick William Federspiel Di Gao J. Karl Johnson John Keith George E. Klinzing Prashant Kumta J. Thomas Lindt Lei Li Joseph McCarthy Badie Morsi John Murphy Robert S. Parker John F. Patzer John W. Tierney Sachin Velankar GĂśtz Veser William R. Wagner Irving Wender Judy Yang

908 Benedum Hall 209 Benedum Hall 930 Benedum Hall 153E Benedum Hall 932 Benedum Hall 905 Benedum Hall 710 Benedum Hall 940 Benedum Hall 909 Benedum Hall 807 Benedum Hall 302E Benedum Hall 926 Benedum Hall 904 Benedum Hall 804 Benedum Hall 929 Benedum Hall 849 Benedum Hall 940 Benedum Hall 906 Benedum Hall 928 Benedum Hall 809 Benedum Hall 300 BRDG2 931 Benedum Hall 306 CNBIO 940 Benedum Hall 927 Benedum Hall 806 Benedum Hall 300 BRDG2 940 Benedum Hall 208 Benedum Hall

624-9648 648-9250 624-2071 624-4828 624-3318 624-7034 624-9875 624-9636 624-9634 624-9649 624-9474 624-8488 624-5644 624-7016 624-0784 624-5014 624-9729 624-3691 624-7362 624-9650 624-5250 624-7364 624-9819 624-9645 624-9930 624-1042 624-5327 624-9644 624-8613

624-9639 624-9639 624-9639 624-9639 624-9639 624-9639 624-9639 624-9639 624-9639 624-9639 624-9639 624-9639 624-9639 624-9639 624-9639 624-8069 624-9639 624-9639 624-9639 624-9639 624-9639 624-9639 383-8788 624-9639 624-9639 624-9639 235-5110 624-9639 624-9639

ataai@pitt.edu balazs@pitt.edu ipb1@pitt.edu beckman@pitt.edu bodnarca@pitt.edu gmpourmp@pitt.edu bunger@pitt.edu shchiang@pitt.edu jditri@pitt.edu rme@pitt.edu federspielwj@upmc.edu gaod@pitt.edu karlj@pitt.edu jakeith@pitt.edu klinzing@pitt.edu pkumta@pitt.edu jtlindt@pitt.edu lel55@pitt.edu jjmcc@pitt.edu morsi@pitt.edu jmurphy@pitt.edu rparker@pitt.edu patzer@pitt.edu jwta@pitt.edu velankar@pitt.edu gveser@pitt.edu wagnerwr@upmc.edu wender@pitt.edu judyyang@pitt.edu

253

NAME

ADDRESS

PHONE

FAX

E-MAIL ADDRESS

CIVIL AND ENVIRONMENTAL ENGINEERING Main Office/ Radisav Vidic, Chair

742F Benedum Hall

(412) 624-1307

(412) 624-0135

vidic@pitt.edu

Jorge Abad Kyle Bibby Melissa Bilec John Brigham Daniel D. Budny Andrew Bunger Leonard W. Casson Kent A. Harries Anthony Iannacchione Vikas Khanna Xu Liang Jeen-Shang Lin M. Magalotti John F. Oyler Piervincenzo Rizzo Morteza Torkamani Luis E. Vallejo Julie M. Vandenbossche Wei, Na Yu, Q.

731 Benedum Hall 709 Benedum Hall 153G Benedum Hall 703 Benedum Hall 126 Benedum Hall 710 Benedum Hall 742C Benedum Hall 218 B Benedum Hall 218 F Benedum Hall 218G Benedum Hall 728 Benedum Hall 725 Benedum Hall 706 Benedum Hall 704 Benedum Hall 729 Benedum Hall 707 Benedum Hall 726 Benedum Hall 705 Benedum Hall 708 Benedum Hall 730 Benedum Hall

624-4399 624-9207 648-8075 624-9047 624-6474 624-9875 624-9868 624-9873 624-8289 624-9603 6249872 624-8158 624-9870 624-9871 624-9575 624-9881 624-9894 624-9879 624-7312 624-9899

624-0135 624-0135 624-0135 624-0135 624-0135 624-0135 624-0135 624-0135 624-0135 624-0135 624-0135 624-0135 624-0135 624-0135 624-0135 624-0135 624-0135 624-0135 624-0135 624-0135

jabad@pitt.edu bibbykj@pitt.edu mbilec@pitt.edu brigham@pitt.edu budny@pitt.edu bunger@pitt.edu casson@pitt.edu kharries@pitt.edu ati2@pitt.edu khannav@pitt.edu xulian@pitt.edu jslin@pitt.edu mjm25@pitt.edu oyler1@pitt.edu pir3@pitt.edu torkmani@pitt.edu vallejo@pitt.edu jmv7@pitt.edu nawei@pitt.edu qiy15@pitt.edu

254

ELECTRICAL AND COMPUTER ENGINEERING NAME

ADDRESS

PHONE

Akcakaya, Murat

364 Thackeray

412-624-8622

412-624-8003

Akcakaya@pitt.edu

Chen, Kevin

1243 Benedum

412-624-9675

412-624-8003

pec9@pitt.edu

Chen, Yiran

4173 Posvar

412-624-5836

412-624-8003

yic52@pitt.edu

El-Jaroudi, Amro

367 Thackeray

412-624-9621

412-624-8003

amro@pitt.edu

El Nokali, Mahmoud

371 Thackeray

412-624-9681

412-624-8003

men@pitt.edu

Jacobs, Steve

365 Thackeray

412-624-9667

412-624-8003

spj1@pitt.edu

Jones, Alex

205 Benedum

412-624-9666

412-624-8003

akjones@pitt.edu

Jones, Irvin

356 Thackeray

412-624-9690

412-624-8003

irj4@pitt.edu

Kim, Hong-Koo

512 Benedum

412-624-9673

412-624-8003

hkk@pitt.edu

Kusic, George

1241 Benedum

412-624-9678

412-624-8003

gkusic@pitt.edu

Levitan, Steven

218C Benedum

412-648-9663

412-624-8003

levitan@pitt.edu

Li, C. C.

372 Thackeray

412-624-9679

412-624-8003

ccl@pitt.edu

Li, Guangyong

506 Benedum

412-624-9663

412-624-8003

gul6@pitt.edu

Li, Helen

4171 Posvar

412-648-9597

412-624-8003

hal66@pitt.edu

Mao, Zhi-Hong

1238 Benedum

412-624-9674

412-624-8003

zhm4@pitt.edu

McDermott, Thomas

808 Benedum

412-648-9585

412-624-8003

tem42@pitt.edu

Mohanram, Kartik

218 A Benedum 412-624-0509

412-624-8003

kmram@pitt.edu

Reed, Gregory

815 B Benedum 412-383-9862

412-624-8003

gfr3@pitt.edu

Sejdic, Ervin

732 Benedum

412-624-0508

412-624-8003

esejdic@pitt.edu

Stanchina, William

372 Thackeray

412-624-8002

412-624-8003

wes25@pitt.edu

Yang, Jun

4178 Posvar

412-624-9088

412-624-8003

juy9@pitt.edu

Yun, Minhee

218E Benedum

412-648-8989

412-624-8003

miy16@pitt.edu

255

FAX

E-MAIL ADDRESS

NAME

ADDRESS

PHONE

FAX

(412) 624-9830 (412) 624-9830 (412) 624-9836 (412) 624-9837 (412) 648-8775 (412) 624-1193 (412) 624-9839 (412 624-9832 (412) 624-9834 (412) 624-9838 (412) 624-9845 (412) 624-9839 (412) 624-9841 (412) 624-9833 (412) 624-9840 (412) 624-5045 (412) 624-9835 (412) 624-9815 (412) 624-9846 (412) 648-8775

(412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-9831 (412) 624-1108 (412) 624-9831 (412) 624-9831

E-MAIL

INDUSTRIAL ENGINEERING

Main Office 1048 Benedum Hall Bopaya Bidanda, Chair 1049 Benedum Hall Mary Besterfield-Sacre 1040 Benedum Hall Karen M. Bursic 1044 Benedum Hall David I. Cleland* 1178D Benedum Hall Youngjae Chun 1041 Benedum Hall Joel M. Haight 1043 Benedum Hall Jeffrey P. Kharoufeh 1036 Benedum Hall Paul Leu 1035 Benedum Hall Louis Luangkesorn 1239 Benedum Hall Lisa Maillart 1030 Benedum Hall Mainak Mazumdar* 1039 Benedum Hall Bryan A. Norman 1033 Benedum Hall Oleg Prokopyev 1037 Benedum Hall Jayant Rajgopal 1039 Benedum Hall Andrew J. Schaefer 1031 Benedum Hall Ravi Shankar 1034 Benedum Hall Larry J. Shuman 152A Benedum Hall Natasa Vidic 1032 Benedum Hall Harvey Wolfe* 1239 Benedum Hall

*Emeritus

256

minervap@.pitt.edu bidanda@.pitt.edu mbsacre@.pitt.edu kbursic@.pitt.edu dic@.pitt.edu yjchun@pitt.edu jhaight@pitt.edu jkharouf@pitt.edu pleu@pitt.edu lol11@pitt.edu lisa.maillart@.pitt.edu mmazumd@.pitt.edu banorman@.pitt.edu oap@pitt.edu rajgopal@.pitt.edu schaefer@.pitt.edu ravishm@pitt.edu shuman@.pitt.edu nav9@pitt.edu hwolfe@.pitt.edu

NAME

ADDRESS

PHONE

FAX

E-MAIL ADDRESS

MECHANICAL ENGINEERING AND MATERIALS SCIENCE

Brian Gleeson, Chair John Barnard Markus Chmielus Sung -Kwon Cho Minking K. Chyu William Clark Daniel Cole Anthony DeArdo Paolo Galdi C. Isaac Garcia Peyman Givi Mark Kimber Jung-Kun Lee Scott Mao Gerald Meier Mark C. Miller Ian Nettleship Anne Robertson Laura Schaefer David Schmidt Nitin Sharma William Slaughter Patrick Smolinski Albert To Jeffrey Vipperman Guofeng Wang Qing-Ming Wang Lisa Weiland Jorg Wiezorek Sylvanus Wosu Doni Wulandana Paolo Zunino

636 F Benedum Hall 538A Benedum Hall 505 BendumHall 538G Benedum Hall 624 Benedum Hall 218G Benedum Hall 538F Benedum Hall 603 Benedum Hall 607 Benedum Hall 606 Benedum Hall 1273 Benedum Hall 206 Benedum Hall 538H Benedum Hall 538D Benedum Hall 805 Benedum Hall Benedum Hall 502 Benedum Hall 408 Benedum Hall 153F Benedum Hall 509 Benedum Hall 538C Benedum Hall 602 Benedum Hall 608 Benedum Hall 508 Benedum Hall 504 Benedum Hall 538B Benedum Hall 511 Benedum Hall 204 Benedum Hall 538I Benedum Hall 152 Benedum Hall 937 Benedum Hall 604 Benedum Hall

(412) 648-1185 624-4963 624-8176 624-9798 624-9783 624-9794 624-3069 624-9737 624-9789 624-9731 624-9605 624-8111 648-3395 624-9602 624-9741 624-9755 624-9735 624-9775 624-9793 624-9755 624-9746 624-8479 624-9788 624-2052 624-1643 624-3325 624-4885 624-9031 624-0122 624-9842 624-3221 624-9774

257

(412) 624-4846 624-8069 624-4846 624-4846 624-4846 624-4846 624-4846 624-8069 624-4846 624-8069 624-4846 624-8069 624-8069 624-4846 624-8069 624-4846 624-8069 624-4846 624-4846 624-4846 624-4846 624-4846 624-4846 624-4846 624-4846 624-4846 624-4846 624-4846 624-8069 624-4846 624-4846 624-8069

bmg36@pitt.edu jbarnard@pitt.edu chmielus@pitt.edu skcho@pitt.edu mkchyu@pitt.edu

wclark@pitt.edu dgcole@pitt.edu deardo@pitt.edu galdi@pitt.edu cigarcia@pitt.edu givi@pitt.edu mlk53@pitt.edu jul37@pitt.edu sxm2@pitt.edu ghmeier@pitt.edu mcmllr@pitt.edu nettles@pitt.edu rbertson@pitt.edu las149@pitt.edu des53@pitt.edu nis62@pitt.edu wss@pitt.edu patsmol@pitt.edu albertto@pitt.edu jsv@pitt.edu guw8@pitt.edu qiw4@pitt.edu lmw36@pitt.edu wiezorek@pitt.edu snn2@pitt.edu raw39@pitt.edu paz13@pitt.edu

NAME

ADDRESS

PHONE

FAX

(412)

(412)

E-MAIL ADDRESS

ADMINISTRATIVE OFFICES Deanâ&#x20AC;&#x2122;s Office Gerald D. Holder, U.S. Steel Dean

109 Benedum Hall

624-9809

624-0412

dnldson@pitt.edu

Sr. Associate Dean for Academic Affairs Larry J. Shuman, Associate Dean

147 Benedum Hall

624-9815

624-1108

pjr10@pitt.edu

Associate Dean for Research David A. Vorp, Associate Dean

123 Benedum Hall

624-8503

624-0412

mam266@pitt.edu

Schohn L. Shannon, Assistant Dean

106 Benedum Hall

624-9866

624-1108

schohn@pitt.edu

Associate Dean for Diversity Sylvanus N. Wosu, Associate Dean

127 Benedum Hall

624-9842

624-2827

snn2@pitt.edu

Engineering Administration Rama Bazaz, Director

151 Benedum Hall

624-9800

624-9808

jradocay@pitt.edu

Development & Alumni Relations Matthew Weinstein, Sr. Executive Director

104 Benedum Hall

624-6814

624-0412

maw28@pitt.edu

Information Technology Brian A. Vidic, Director

148 Benedum Hall

624-8101

624-2027

vidicba@pitt.edu

Bioengineering Sanjeev G. Shroff, Gerald McGinnis Chair

306 CNBIO

624-2095

383-8788

sshroff@pitt.edu

Chemical and Petroleum Engineering Steven R. Little, Chair

940F Benedum Hall

624-9614

624-9639

srlittle@pitt.edu

Civil and Environmental Engineering Radisav D. Vidic, Chair

742F Benedum Hall

624-9870

624-0135

vidic@pitt.edu

Electrical and Computer Engineering William E. Stanchina, Chair

372 Thackeray Hall

624-8002

624-8003

wes25@pitt.edu

Industrial Engineering Bopaya Bidanda, Chair

1049 Benedum Hall

624-9830

624-9831

bidanda@pitt.edu

Mechanical Engineering and Materials Science Brian M. Gleeson, Chair

649 Benedum Hall

624-9780

624-4846

bgleeson@pitt.edu

Computer Engineering Alex Jones, Director

205 Benedum Hall

624-8708

624-8003

akjones@pitt.edu

Co-Operative Education Maureen Barcic, Director

137 Benedum Hall

624-9826

624-2827

paub2m@pitt.edu

Engineering Science Brian M. Gleeson, Director

649 Benedum Hall

624-9780

624-4846

bgleeson@pitt.edu

DEPARTMENTS

SPECIAL ACADEMIC PROGRAMS

258

NAME

ADDRESS

PHONE

FAX

E-MAIL ADDRESS

Freshman Engineering Program Daniel D. Budny, Academic Director

126 Benedum Hall

624-9825

624-2827

fpoadmin@engr.pitt.edu

International Engineering Initiatives Kristine Lalley, Director

133 Benedum Hall

624-3489

624-2827

krl33@pitt.edu

Pitt Engineering Career Access Program (PECAP) Alaine Allen, Director

121 Benedum Hall

624-0224

624-8869

allen@pitt.edu

Student Services Cheryl Paul, Director

130 Benedum Hall

624-9825

624-2827

cheryl35@pitt.edu

Basic Metals Processing Research Institute (BAMPRI) Anthony J. DeArdo, Director

603 Benedum Hall

624-9737

624-8069

deardo@pitt.edu

Center for Bioengineering Sanjeev G. Shroff, Director

306 CNBIO

624-2095

383-8788

sshroff@pitt.edu

Center for Complex Engineered Multifunctional Materials (CCEMM) Prashant N. Kumta, Director

302 Benedum Hall

648-0223

624-8069

pkumta@pitt.edu

Center for e-Design and Realization David A. Vorp, Director

123 Benedum Hall

624-8503

624-0412

mam266@pitt.edu

Center for Energy Gregory Reed, Interim Director

815B Benedum Hall

383-9862

624-8003

reed5@pitt.edu

Engineering Education Research Center Mary Besterfield-Sacre, Director

1040 Benedum Hall

624-9836

624-9831

mbsacre@engr.pitt.edu

Manufacturing Assistance Center (MAC) Bopaya Bidanda, Director

1049 Benedum Hall

624-9830

624-9831

bidanda@pitt.edu

Mascaro Center for Sustainable Innovation Eric J. Beckman, Co-Director Gena M. Kovalcik, Co-Director

153 Benedum Hall 153 Benedum Hall

624-9698 624-9698

624-7820 624-7820

beckman@pitt.edu gmk9@pitt.edu

Materials Micro-Characterization Center (MMCC) C. Isaac Garcia, Director

606 Benedum Hall

624-9731

624-8069

cigarcia@pitt.edu

Center for Medical Innovation David A. Vorp, Director Alan D. Hirschman, Executive Director

123 Benedum Hall 325 Benedum Hall

624-8503 624-1177

624-0412 927-2632

mam266@pitt.edu alh138@pitt.edu

Center for Metal Cutting Fluids Bopaya Bidanda, Director

1049 Benedum Hall

624-9830

624-9831

bidanda@pitt.edu

Center for Molecular and Materials Simulation J. Karl Johnson, Co-Director Kenneth Jordan, Co-Director

904 Benedum Hall 330 Eberly Hall

624-9631 624-8690

624-9639 624-8611

karlj@pitt.edu jordan@pitt.edu

SPECIAL ACADEMIC PROGRAMS (continued)

ENGINEERING CENTERS

259

NAME

ADDRESS

PHONE

FAX

E-MAIL ADDRESS

Musculoskeletal Research Center Savio L.-Y. Woo

405 CNBIO

648-2000

648-2001

slyw@pitt.edu

Center for National Preparedness Kenneth Sochats

502 UPLAC

624-9416

Petersen Institute of Nanoscience and Engineering David A. Vorp, Director

123 Benedum Hall

624-8503

624-0412

mam266@pitt.edu

Radio Frequency Identification (RFID) Center of Excellence Ervin Sejdic, Director

732 Benedum Hall

624-0508

624-8003

esejdic@pitt.edu

Center for Simulation and Modeling J. Karl Johnson, Co-Director Kenneth Jordan, Co-Director

904 Benedum Hall 330 Eberly Hall

624-9631 624-8690

624-9639 624-8611

karlj@pitt.edu jordan@pitt.edu

Center for Sustainable Transportation Infrastructure Radisav Vidic, Co-Director Mark Magalotti, Co-Director

742F Benedum Hall 706 Benedum Hall

624-9870 624-8618

624-0135 624-0135

vidic@pitt.edu mjm25@pitt.edu

Swanson Center for Micro and Nano Systems David A. Vorp, Director

123 Benedum Hall

624-8503

624-0412

mam266@pitt.edu

Swanson Center for Product Innovation David A. Vorp, Director

123 Benedum Hall

624-8503

624-0412

mam266@pitt.edu

John A. Swanson Institute for Technical Excellence David A. Vorp, Director

123 Benedum Hall

624-8503

624-0412

mam266@pitt.edu

ENGINEERING CENTERS (continued)

260

sochats@pitt.edu

94297-0314