Dewalt Catalogue

NEWS & PROMOTIONS OCTOBER 2019

www.

.com.au

GUARANTEED TOUGH. ®

BUY MORE GET MORE FREE VIA REDEMPTION 5AH XR BATTERY DCB184-XE

WHEN YOU SPEND

$1399 OR MORE XR RADIO CHARGER DCR027-XE

WHEN YOU SPEND

$1999 OR MORE XR RADIO CHARGER + 5AH XR BATTERY DCR027-XE + DCB184-XE

+ WHEN YOU SPEND

$2499 OR MORE 216MM (8 1/2") SLIDE MITRE SAW (XPS) DCS777T2-XE

WHEN YOU SPEND

$2999 OR MORE VISIT

GUARANTEEDTOUGH.COM.AU TO REDEEM TODAY

Terms & Conditions Offer valid for products purchased from 01/10/2019 to 31/01/2020, and can be redeemed online until 14/02/2020. Redemption item only available in same transaction. Limited to 1 Spend Level redemption per Transaction. Based on purchases of either DE WALT Cordless or DE WALT Corded Power Tools, Power Tool Accessories & Storage purchases. Excludes Pressure Washer and Generator purchases. Not available in conjunction with any other offer. Visit www.GUARANTEEDTOUGH.com.au for full Terms & Conditions

FREE

VIA REDEMPTION

XR FLEXVOLT BATTERY & CHARGER STARTER KIT DCB118T1-XE

WHEN YOU

PURCHASE

ANY 2 SELECTED BARE UNITS FROM THE LANDSCAPING RANGE

(ELIGIBLE PRODUCTS BELOW) 18V XR BRUSHLESS SPLIT SHAFT LINE TRIMMER DCM561PBS-XE

18V XR HEDGE TRIMMER DCM563PB-XE

18V XR BRUSHLESS CHAINSAW DCM565N-XE

18V XR BRUSHLESS BLOWER DCM562PB-XE

54V XR FLEXVOLT BRUSHLESS SPLIT SHAFT LINE TRIMMER DCM5713N-XE

54V XR FLEXVOLT BRUSHLESS CHAINSAW DCM575N-XE

54V XR FLEXVOLT AXIAL BLOWER DCMBA572N-XE

VISIT

GUARANTEEDTOUGH.COM.AU TO REDEEM TODAY

OUTDOOR POWER EQUIPMENT

(BARE) DCM572N-XE

(BARE) DCM575N-XE

299

$

RRP

54V XR FLEXVOLT BRUSHLESS BLOWER (BARE UNIT) • • • • • • •

Power Output: 720W Runtime: 15min (DCB547) Air Speed: 207km/h Air Volume: 423CFM Control: Variable speed trigger Noise Power: 99.5dB(A) Vibration: 1.9m/s2

(KIT) DCM575X1-XE

509

$

RRP

699

$

RRP

54V XR FLEXVOLT BRUSHLESS CHAINSAW • • • • • • •

Power Output: 1500W Runtime: 130cuts at 100x100mm (DCB547) Chain Speed: 15m/s Cut Capacity: 40cm, 3/8” Maintenance: Tool-free with auto oiling Noise Power: 100.5dB(A) Vibration: 3.5m/s2

FREE VIA REDEMPTION

(BARE) DCMW564N-XE

549

$

RRP

2 X 18V XR BRUSHLESS MOWER • • • • • • •

Power Output: 1400W Runtime: 800m2 (2x DCB184) Collection Bag: 55L Cut Capacity: 48cm with 51cm Metal deck 5 Cutting Heights: 25-86mm Noise Power: 92dB(A) Vibration: 2.5m/s2

54V XR FLEXVOLT BRUSHLESS CHAINSAW KIT

OR

DCD796N-XE OR DCB547-XE

FREE VIA REDEMPTION 18V HAMMER DRILL DRIVER KIT OR 2 X 5AH BATTERIES

OR

DCM575X1-XE

WHEN YOU PURCHASE 2 X 18V XR BRUSHLESS LAWN MOWER KIT

DCD778S2T-XE OR 2 X DCB184-XE

249

$

RRP

DCMW564T2-XE

(BARE) DCM565N-XE

(BARE) DCM562PB-XE

329

$

RRP

249

$

RRP

18V XR HEDGE TRIMMER (BARE UNIT)

18V XR BRUSHLESS CHAINSAW (BARE UNIT)

18V XR BLOWER (BARE UNIT)

• Up to 70 mins runtime (DCB184) • 55cm Dual action, hooked-tooth laser cut blades • 1400spm Cutting strokes/min • 19mm Cutting gap • Safety lock • Wrap around aux handle

• • • • • • •

• • • • • •

DCM563PB-XE

2

799

$

RRP

WHEN YOU PURCHASE

18V XR HAMMER DRILL SKIN OR 9AH BATTERY

(BARE) DCM563PB-XE

(KIT) DCMW564T2-XE

DCM565N-XE

Power Output: 600W Runtime: 70cuts at 100x100mm (DCB184) Chain Speed: 8m/s Cut Capacity: 30cm, 3/8” Maintenance: Tool-free with auto oiling Noise Power: 96.5dB(A) Vibration: 3.5m/s2

DCM562PB-XE

Up to 20 mins runtime (DCB184) 400CFM air volume & and 145km/h Variable speed trigger with speed lock High efficiency brushless motor Free standing base Lightweight & compact 2.6kg

NEW

TOUGHNESS

WITHOUT

LIMITS

(BARE) (KIT) DCMBA572N-XE DCMBA572X1-XE

329

$

RRP

529

$

RRP

54V XR FLEXVOLT BRUSHLESS AXIAL BLOWER

The NEW 54V XR FLEXVOLT Axial Blower provides petrol performance with the FREEDOM OF CORDLESS. Providing both high speed and huge air volume per minute the unit is ideal for expansive jobsite debris removal. With its ergonomic design and weight balance it is also Ideal for prolonged use.

• • • • •

Air Speed: 200km/h Air Volume: 650CFM Control: Variable speed trigger Ease of Use: Lock-On Trigger at desired speed Axial Design provides optimized balance

NEW

NEW

(BARE) DCM5713N-XE

429

$

RRP

54V XR FLEXVOLT BRUSHLESS SPLIT SHAFT LINE TRIMMER (BARE UNIT) • • • • • • •

Power Output: 530W Runtime: 46min (DCB547) Cut Speed: 0-5600/6600RPM Cut Capacity: 38cm Swathe, 2.0mm line Control: Variable speed trigger Noise Power: 94dB(A) Vibration: 10.1m/s2

(BARE) DCM561PBS-XE

269

$

RRP

18V XR BRUSHLESS SPLIT SHAFT LINE TRIMMER (BARE UNIT) • Up to 54 mins runtime (DCB184) • 33cm swathe with 2.0mm line • Variable 2 speed control 0-4600/0-6000rpm • High efficiency brushless motor • Automatic bump feed • Wrap around aux handle

NEW

(BARE) DCMPS567N-XE

349

$

RRP

18V XR BRUSHLESS POLE SAW (BARE UNIT) • • • •

Powerful 18V Brushless Motor 20cm Low Kick Back Bar and Chain Metal Bucking Strops and Tree Hook 1.5m reach extendable to 4.5m

3

NEW

WORLD'S FIRST 54V CORDLESS WALL CHASER DCG200NT-XJ

799

$

RRP

54V XR FLEXVOLT BRUSHLESS WALL CHASER (BARE UNIT) DCG200NT-XJ • • • •

9000RPM, 32mm Max Depth of Cut 35mm Max Width of Cut Wireless Tool Control Module allows for Wireless activation of compatible extractors • AirLock Compatible • Electronic Brake Supplied with 2 x 125mm Diamond Discs and TSTAK Kitbox

18V XR HEAT GUN (BARE UNIT) DCE530-XJ

The DCE530 is our first dedicated cordless heat gun designed for many users and applications on site such as shrinking electrical tubing, bending PVC pipes, drying materials, loosening nuts and bolts and many more. Compatible with all 18V XR batteries the DCE530 features a compact size, 2 temperature settings with a maximum of 530°C to allow for maximum versatility in applications and a lock on switch to improve comfort in longer jobs.

• • • •

4

Dual Action Trigger Lock On Button LED light Supplied with 2 Application Nozzles; surface and reflector

DCE530-XJ

199

$

RRP

DCE530-XJ Temparature Settings

Automatic

Operating Temperature

290/530°C

Airflow

109/190 L/Min

Weight

0.5 kg

NEW

4 PORT FAST

CHARGER 100

TIME

90 80

50 40 30

60

60

50

45

40

30

22

10

75

20

100

MINUTES MINUTES

CHARGETIME TIME CHARGE

70 60

DCB548

DCB547

DCB546

DCB189

DCB184

DCB187

DCB182

DCB183

DCB181

0

12 AH 9 AH 6 AH 4 AH 5AH

3AH

4 AH 2 AH

1.5 AH

BATTERY

BATTERY

XR 4 PORT FAST CHARGER DCB104-XE

Get charged quickly with the new 10.8 - 18V 4 port fast charger. With the ability to simultaneously charge four batteries at the same time with 8amp output you will be able to charge 4 x 6.0AH XR FLEXVOLT batteries in one hour.

ToughSystem™ Compatible - Featuring side mounts, the charger can be mounted to the top of a ToughSystem™ Storage box for easy jobsite pack up.

LONG

RUNTIME

DCB546-XE

DCB547-XE

RRP

RRP

169

$

229

$

DCB548-XJ

289

$

RRP

DCB104-XE

399

$

RRP

SHORT CHARGE TIME

WHY DEWALT XR FLEXVOLT? XR FLEXVOLT™ is a range of 54V power tools that offer runtime and performance that has never been seen before. For the first time, trade professionals can reliably undertake heavy-duty construction applications using 54V power without the inconvenience of a cable.

WHAT ARE XR FLEXVOLT BATTERIES? DEWALT XR FLEXVOLT™ is the only battery on the market that can switch from 54V to 18V, making it backward-compatible with your existing XR powertools. Offered currently in either 6Ah, 9Ah or 12Ah capacity.

5

18V / 54V XR BRUSHLESS KITS 1599

$

RRP

18V / 54V 5 PIECE KIT 6AH

DCZ596T2T-XE

• DCD996 XRP 3 Speed Hammer Drill Driver • DCF887 3 Speed Impact Driver • XR FAST Charger • 2 x DEEP TSTAK VI 54V XR FLEXVOLT • DCS575 54V XR 184mm Circ Saw • DCG414 54V XR 125mm Angle Grinder • DCS388 54V XR Reciprocating Saw • 2 x 6.0Ah 18V/54V XR FLEXVOLT Batteries

FREE VIA REDEMPTION

WHEN YOU PURCHASE

18V XR BRUSHLESS ROTARY HAMMER

18V / 54V 5 PIECE KIT 6AH

DCH133N-XJ

DCZ596T2T-XE

1499

$

RRP

18V / 54V 3 PIECE KIT 9AH DCZ333X2T-XE

• DCD996 XRP 3 Speed Hammer Drill Driver • DCF887 3 Speed Impact Driver • DEEP TSTAK VI & TSTAK II • XR FAST Charger 54V XR FLEXVOLT • DCH333 54V XR 3kg SDS-PLUS Rotary Hammer • 2 x 9.0Ah 18V/54V XR FLEXVOLT Batteries

699

$

RRP

FREE VIA REDEMPTION

18V XR BRUSHLESS 125MM PADDLE SWITCH GRINDER DCG406N-XJ

6

18V XRP 2 PIECE KIT 6AH DCK296T2T-XE

• DCD996 XRP 3 Speed Hammer Drill Driver • DCF887 3 Speed Impact Driver • XR FAST Charger • DEEP TSTAK VI 54V XR FLEXVOLT • 2 x 6.0Ah 18V/54V XR FLEXVOLT Batteries

WHEN YOU PURCHASE

A SELECTED 54V XR BRUSHLESS KIT DCK296T2T-XE, DCZ333X2T-XE

18V XR BRUSHLESS KITS 749

$

RRP

FREE VIA REDEMPTION

649

$

18V XR BRUSHLESS 125MM PADDLE SWITCH GRINDER

RRP

DCG406N-XJ

18V XR BL 2PC KIT 5AH

18V XRP BL 2PC KIT 5AH

• DCD996 3 Speed Hammer Drill/Driver • DCF894 1/2” Compact Mid Torque Wrench Kit Includes: • 2 x 5Ah 18V XR Batteries • Multi Voltage Charger • 1/2” Square to 1/4” Hex Adaptor

• DCD996 XRP 3 Speed Hammer Drill Driver • DCF887 3 Speed Impact Driver Kit Includes: • 2 x 5Ah 18V XR Batteries • XR FAST Charger • DEEP TSTAK II

DCK2094P2-XE

569

$

RRP

DCK296P2T-XE

WHEN YOU PURCHASE

A SELECTED 54V XR BRUSHLESS KIT DCK296P2T-XE, DCK2094P2-XE

FREE VIA REDEMPTION

459

$

18V XR JOBSITE BLOWER

RRP

DCV100-XE

18V XRP BL KIT 5AH

18V XR BL KIT 5AH

• DCD996 XRP 3 Speed Hammer Drill Driver • No Load Speed: 0-450/1,500/2,000RPM • 820 UWO Kit Includes: • 2 x 5Ah 18V XR Batteries • DCB115-XE Multi-Voltage Charger • TSTAK Kit Box

• DCD796 XR 2 Speed Hammer Drill Driver • No Load Speed: 0-600/2,000RPM • 15 Position Adjustable Torque Kit Includes: • 2 x 5Ah 18V XR Batteries • DCB115-XE Multi-Voltage Charger • TSTAK Kit Box

DCD996P2-XE

BUY MORE

GET MORE VISIT

GUARANTEEDTOUGH.COM.AU TO REDEEM TODAY

DCD796P2-XE

WHEN YOU PURCHASE

A SELECTED 18V XR BRUSHLESS KIT DCD796P2-XE, DCD996P2-XE

FREE

VIA REDEMPTION

5AH XR BATTERY

XR RADIO CHARGER

DCB184-XE

DCR027-XE

WHEN YOU SPEND

WHEN YOU SPEND

$1399 OR MORE XR RADIO CHARGER + 5AH XR BATTERY DCR027-XE + DCB184-XE

$1999 OR MORE 216MM (8 1/2") CROSS CUT MITRE SAW (XPS) DCS777T2-XE

+ WHEN YOU SPEND

$2499 OR MORE

WHEN YOU SPEND

$2999 OR MORE 7

54 XR FLEXVOLT COMPRESSOR

(BARE) DCC1054N-XJ

399

$

RRP

The DCC1054 XR FLEXVOLT Compressor makes pneumatic nailing completely cordless. Part of the 54V XR FLEXVOLT range, the 10 litre compressor is battery powered and lightweight allowing you to cut the cord and take pneumatic nailing anywhere on the jobsite.

Featuring our new OneTurn regulator, the DCC1054 allows you to adjust the compressor’s regulated pressure quickly and easily.

The DCC1054 Compressor is ideally suited to 2nd fix brad nailing applications, air powered paint gun tasks or even vehicle tyre inflation.

(KIT) DCC1054T2-XE

749

$

RRP

349

$

RRP

54V XR FLEXVOLT 184MM CIRCULAR SAW DCS575N-XE

54V XR FLEXVOLT SDS+ 3KG ROTARY HAMMER DCH333NT-XJ

349

$

RRP

54V XR FLEXVOLT 125MM ANGLE GRINDER DCG414N-XJ

DCH481N-XJ

399

54V XR FLEXVOLT REAR HANDLED CIRCULAR SAW DCS577N-XJ

DCS388N-XJ

849

$

RRP

54V XR FLEXVOLT 165MM PLUNGE SAW DCS520NT-XJ

749

$

RRP

479

$

RRP

54V XR FLEXVOLT 230MM CONCRETE CUT OFF SAW

54V XR FLEXVOLT STUD & JOIST DRILL

*Blade sold seperately - DT40260-QZ (Diamond Wheel) *Blade sold seperately – DWAFV8918 (Abrasive Wheel)

*Drill bits sold seperately - see page 10 for DEWALT Self Feed Bit Range

DCS690N-XJ

All products featured on this page are bare units, batteries and chargers sold separately.

8

54V XR FLEXVOLT RECIPROCATING SAW

799

54V XR FLEXVOLT SDSMAX 5KG ROTARY HAMMER

349

$

RRP

$

RRP

$

RRP

649

$

RRP

DCD460N-XJ

140+ PRODUCTS OUR FASTEST GROWING SYSTEM 319

18V XR BRUSHLESS XRP 3 SPEED HAMMER DRILL DCD996N-XE

199

$

$

RRP

RRP

18V XR AC/DC INFLATOR DCC018N-XJ

18V XR BRUSHLESS HEAVY DUTY 3 MODE SDS+ ROTARY HAMMER DCH274N-XE

349

$

RRP

DCF894N-XJ

DCF899N-XE

18V XR BRUSHLESS HIGH TORQUE IMPACT WRENCH

DCF899N-XE (DETENT PIN) DCF899HN-XE (HOG RING)

309

$

RRP

18V XR BRUSHLESS 125MM GRINDER DCG405N-XJ (SLIDE SWITCH) DCG406N-XJ (PADDLE SWITCH) DCG405FN-XJ (FLAT HEAD - SLIDE)

DCS356N-XJ

309

18V XR BRUSHLESS 184MM CIRCULAR SAW

DCV584L-XE

299

18V XR BRUSHLESS OSCILLATING MULTI-TOOL

$

RRP

XR AC/DC WET & DRY VAC 7.5L (L-CLASS)

$

RRP

18V XR BRUSHLESS RECIPROCATING SAW DCS367N-XJ

599

$

RRP

18V XR LI-ION BRUSHLESS 15GA DA BRADDER DCN650N-XJ

309

349

$

$

RRP

379

$

RRP

DETENT PIN

HOG RING

18V XR BRUSHLESS 1/2” MID TORQUE WRENCH

429

$

RRP

DCF899HN-XE

DCS570N-XE

539

$

RRP

RRP

18V XR BRUSHLESS PLANER DCP580N-XE

All products featured on this page are bare units, batteries and chargers sold separately.

9

ULTIMATE SAFETY. ADVANCED DUST

MANAGEMENT

SOLUTIONS When the Perform & Protect shield is awarded for control, it is guaranteed that additional innovative torque control safety features have been incorporated into the design of the tool.

50%

UP TO

LESS VIBRATION

When the Perform & Protect shield is awarded for vibration, it is guaranteed that Tri-Axial vibration levels have been reduced, increasing usage time without reducing performance.

COMPLETE

TORQUE

CONTROL When the Perform & Protect shield is awarded for dust, it is guaranteed the potential of inhaling dust is dramatically reduced to give a cleaner, safer working environment while also increasing the durability of the tool.

10

MAXIMUM

PRODUCTIVITY.

M CLASS

CORDLESS DUST EXTRACTION IS HERE!

54V XR FLEXVOLT M-CLASS DUST EXTRACTOR DCV586M

Powered by 54V XR FLEXVOLT technology the DCV586M is the ultimate dust extraction solution for a new generation of cordless tools and the key to unlocking the cordless jobsite.

The DEWALT BRUSHLESS motor and high capacity XR FLEXVOLT battery coupled with dual M-Class certified filters with automatic cleaning delivers powerful, constant performance and runtime for the

(KIT) DCV586MT2-XE

899

$

RRP

(BARE) DCV586MN-XJ*

549

$

RRP

most demanding applications.

Other features include a remote for wireless operation, a recessed battery housing to protect from jobsite conditions and TSTAK compatibility.

DCV586M Filter clean

Automatic

Wet / dry Tool actuation

Yes Wireless keyfob

Capacity

11 L

Hose length

2.5 m *Bare unit DCV586MN-XJ

DWV902M-XE

1400W 38L M-CLASS DUST EXTRACTOR DWV902M-XE

859

$

RRP

DUST MANAGEMENT

Advanced Dust Extraction Solutions.

DCV902M

The Perform & Protect dust certification logo guarantees that the risks of dust inhalation are considerably reduced, to work in a cleaner and more secure environment.

Power Input

1400W

Max Airflow

31.1l/sec

Capacity Power Take Off Rating Wet/Dry

BONUS*

FREE VIA REDEMPTION

DWV9350-XJ

DCV584L-XE

FLOOR CLEANING KIT

38L 1000W Yes

18V XR L-CLASS WET/DRY VAC

11

PURCHASE

A SELECTED ROTARY HAMMER BARE UNIT

DCH333NT-XJ

649

$

RRP

DCH274N-XE

DCH254N-XE

RRP

RRP

539

$

429

$

FREE VIA REDEMPTION

900W 125MM ANGLE GRINDER DWE4151-XE

919

$

RRP

18V XR HIGH POWERED SDS+ ROTARY HAMMER 5.0AH DCH283P2-XE

FREE VIA REDEMPTION 18V XR BRUSHLESS 125MM PADDLE SWITCH GRINDER DCG406N-XJ

• No Load Speed 0 - 980rpm • Max. Drilling Capacity Concrete 26mm • Hand/Arm Vibration - drilling into Concrete 8.5m/s2 • Blows Per Minute 0 - 4480bpm • Impact Energy 2.8J Kit Includes: • 2 x 5AH 18V XR Batteries • DCB115-XE MULTI-VOLTAGE CHARGER

1129

$

RRP

54V XR FLEXVOLT SDS+ 3-MODE HAMMER DRILL KIT 9.0AH

FREE VIA REDEMPTION 18V XR BRUSHLESS 125MM PADDLE SWITCH GRINDER DCG406N-XJ

DCH333X2-XE

• No Load Speed 0 - 1000rpm • Max. Drilling Capacity Concrete 30mm • Hand/Arm Vibration - drilling into Concrete 7.5m/s2 • Blows Per Minute 0 - 4480bpm • Impact Energy 3.5J Kit Includes: • 2 X 9AH 18V/54V XR FLEXVOLT Batteries • XR FAST CHARGER • T-STAK KIT BOX

SDS-PLUS® 4 CUTTER

12

• 4 flute helix maximises debris removal for fast drilling and clear holes

• Optimised heat treatment for maximum strength

• Solid piece carbide with 4 cutting faces to prevent jamming in rebar

• The drill tip and body are connected using the resistance welding method

• The carbide tip and body brazed together via an innovative welding technique

• Available in ø sizes from 5mm to 14mm

METAL WORKING SOLUTIONS

279

$

RRP

969

279

$

$

RRP

RRP

230MM CORDED ANGLE GRINDER 2400W

2200W 355MM (14") MULTI-CUTTER

180MM CORDED ANGLE GRINDER 2400W

AAngle Grinder 230mm (9") 2400W Trigger Switch, 6,500 PRM, Dust Ejection System, Anti vibration Rear & Side handles, Cut off Brushes, Keyless Guard

• Large tool-free pivoting fence • 70 tooth tungsten carbide tipped blade • 25.4mm arbor fitment

Angle Grinder 180mm (7") 2400W Trigger Switch, 8,500 PRM, Dust Ejection System, Anti vibration Rear & Side handles, Cut off Brushes, Keyless Guard

DWE4559-XE

DW872-XE

DWE4557-XE

FREE VIA REDEMPTION

FREE VIA REDEMPTION

900W 125MM ANGLE GRINDER

A SELECTED LARGE ANGLE GRINDER OR MULT-CUTTER

DWE4151-XE

DWE4559-XE, DWE4557-XE, DW872-XE

449

$

RRP

180MM VARIABLE SPEED POLISHER

FREE VIA REDEMPTION 18V XR HAMMER DRILL KIT DCD778S2T-XE

DWP849X-XE

• Variable speed trigger • Rubber overmould back handle • Large spindle lock button allows easy changing of the backing pad Power Input No Load Speed Max. Disc Diameter Spindle Thread

1250W 0-600/3500rpm 150 & 180 & 230mm M14 13

NEW

18V XR BRUSHLESS UNIVERSAL DUST EXTRACTOR

(BARE) DWH161N-XJ

299

$

RRP

(KIT) DWH161D1-XE

399

$

RRP

The DWH161 Brushless Universal Dust Extractor is a lightweight, wearable, high mobility dust extraction solution.

It's optimized for a wide range of tools and applications including SDS Plus Rotary Hammers for drilling and chipping, percussion hammer drills, drywall cutout tools, sanders, routers, and jig saws.

• Independent unit powered by DEWALT Battery • Wireless Tool Control • HEPA Certified Filter • 1m Flexible Hose, Belt Hook, Carry/ Shoulder Strap, Universal Fitment Rotary hammer not included

(BARE) DCH263N-XJ

349

$

RRP

18V XR BRUSHLESS IN-LINE 3 MODE SDS+ ROTARY HAMMER 3.0J of impact energy allowing concrete drilling up to 28mm PERFORM & PROTECT - Anti-Vibration Control rear handle reduces hand/arm vibration to 9.1m/s2 3 Modes – Rotary only drilling, Hammer Drilling and Chiseling High-performance 3.0J inline cordless SDS-Plus Rotary Hammer Drill enabling fast drilling up to 28mm Ø into solid concrete – now the most powerful 18V SDS-Plus hammer in the DEWALT® range

14

(KIT) DCH263P1-XE

499

$

RRP

ADHESIVE RANGE PV45 POLYESTER • Cost effective solution • For Low-Medium loads • Use with standard caulking gun

BONUS

BOX OF 12X160MM ZINC STUDS WITH ANY ADHESIVE PURCHASE

AC100PRO VINYLESTER • Quick curing mortar for heavy loads • Ideal for horizontal or vertical applications • Approved for water filled holes

PURE150PRO EPOXY • High-strength twocomponent solution • Can be used in damp, wet or water filled holes • Approved for Seismic loading

BOTTOM PLATES TO PLASTERBOARD WE’VE GOT YOU COVERED 30.50

$

RRP

WALLDOG™ 100 PACK DFMWDP

50.50

$

RRP

42

$

RRP

CHIPBOARD SCREWS 8X32 ZINC, 1000 PACK

BLUETIP SCREW-BOLT™ 10X100 ZINC, 25 PACK

DFS008-PT

DFMBT10100

NEW

18V XR ELECTRICIAN’S STAPLER The DCN701 18V XR Stapler allows electrical contractors to secure cables on the jobsite faster and more consistently. The tool automatically adjusts depth of drive based on cable thickness and fits without pinching.

A compact size of 200mm allows the user to work between joists and a built in LED light illuminates the working area when power isnt available.

DCN701D2-XE

529

$

RRP

DCN701N-XJ

379

$

RRP

DRS18100-XJ

49.95

$

RRP

DCN701N / D2 Magazine Capacity

35

Height

200mm

Weight

2.1kg

DRS18100 Staple Diameter Staple Size

19mm Crown 25mm

15 15

1299

$

RRP

PRODUCTIVITY

ACCURACY

CAPACITY

EASE OF USE

1675W 305MM (12”) DOUBLE BEVEL SLIDE COMPOUND MITRE SAW (XPS) XPS work light – excellent cutline visibility, no adjustment required

AIR LOCK - Fully compatible allowing direct connection with DEWALT dust management system

Outstanding cutting capacity of 303mm x 110mm – to meet all your application requirements

High quality slide rail assembly – for long life performance

DWS780-XE (MAINS POWERED 230V AC) Power Input

1675W

Blade Speed

3800RPM

Blade Diameter

305mm

Blade Bore

25.4mm

Mitre Capacity

60/50°

Bevel Capacity

49/49°

Max. Depth of Cut

170mm

Width x Height x Depth

770 x 396 x 470mm

Weight

25kg

Kit Includes • 60 Tooth Blade • Dust Bag

• Blade Spanner • Material clamp

X Y

X 90˚ 90˚ 303 mm

Precision machined base and rotary table for jobsite durability

Stainless mitre detent lock – delivers outstanding repeatable accuracy

X

Y

X

Y

410 mm

33 mm

44 mm

170 mm

330 mm

58 mm

345 mm

44 mm

25 mm

170 mm

90˚ 45˚ 211 mm

112 mm

244 mm

76 mm

45˚ 45˚ 315 mm

50 mm

45˚ 90˚

BONUS*

FREE VIA REDEMPTION

DWX723-XE

DCD778S2T-XE

LONG BEAM MITRE SAW STAND

*Bonus in store at participating retailers

16

Tall dual sliding fences – maximising work piece stability and accuracy

Y 110 mm

18V XR HAMMER DRILL KIT

GUARANTEED TOUGH

MACHINERY

254MM (10”) HEAVY DUTY TABLE SAW 2000W DWE7491-XE

1249

$

RRP

DWE7491-XE Rip Capacity

825mm

Max. D.O.C.

79mm @ 90°

Weight

26.6kg

Includes: • 24 tooth saw blade • Mitre attachment • 2 blade spanners & push stick

• Rack & Pinion Fence for Increased Accuracy & ease of use

Rolling table saw stand sold separately.

FREE VIA REDEMPTION 1350W 184MM CIRCULAR SAW

BONUS*

TABLE SAW SCISSOR STAND DWE74912-XJ

DWE560-XE

849

$

RRP

999

$

RRP

1850W LIGHTWEIGHT TABLE SAW 210MM

54V XR FLEXVOLT TABLE SAW 210MM

• 1850W 610M Right Rip • Rack & Pinion Fence for Increased Accuracy

• Cuts up to 83m 19mm plywood.** • Up to 110m hardwood veneer laminate flooring.** • Cuts up to 75m 16mm melamine.**

DWE7485-XE

DCS7485N-XJ

** Using Blade - DT99565-QZ

BONUS*

HEAVY DUTY STAND DE7450-XE

FREE VIA REDEMPTION 54V XR FLEXVOLT 6.0AH STARTER KIT DCB118T1-XE

*Bonus in store at participating retailers

17

54V XR FLEXVOLT PLUNGE SAW 165MM (6 1/2”) 6.0Ah KIT

DCS520T2-XE

DCS520T2-XE - KIT Voltage Blade Speed

1149

$

RRP

54V

FREE VIA REDEMPTION

2500-4200 rpm

Blade Size

18V XR HAMMER DRILL DRIVER

165mm

Bore

20mm

Max Depth of Cut (at 90° on track)

55mm

Bevel Capacity

0-47°

DCD778S2T-XE

Includes DWS5022 1.5m Plunge Saw Guide Rail

999

$

RRP

FREE VIA REDEMPTION

PORTABLE THICKNESSER DW734-XE

DCD776C2-XE

Power Input No Load Speed Max. Capacity

1800 W 10000 rpm 317 mm

Max. Depth of Cut

429

$

RRP

1050W 4.0MM HEAVY DUTY PLANER D26500K-XE Power Input Power Output No Load Speed Maximum Depth of Cut

1050W 620 W 13500 rpm 4 mm

749

$

RRP

900W ¼” PREMIUM KIT ROUTER/LAMINATE TRIMMER

1300W 165MM HEAVY DUTY PLUNGE SAW

Power Input

900 W

Power Input

Power Output

620 W

No Load Speed

1750-4200 RPM

16000-27000 rpm

Blade Diameter

165 MM

D26204K-XE

No Load Speed Plunge Stroke/Movement Collet Size

Planer Width

82 mm

Max. Cutter Diameter

DWE6411-XE

499

$

25 mm

230W ¼ SHEET SANDER

3 mm

RRP

Rebating Depth

FREE VIA REDEMPTION

18V XR HAMMER DRILL DRIVER

55 mm 6.35 mm

DWS520KT-XE

Blade Bore Bevel Capacity

1300 W

20 MM 47°

36 mm

FREE VIA REDEMPTION A SELECTED PLANER, ROUTER OR PLUNGE SAW D26500K-XE, D26204K-XE, DWS520KT-XE

18

18V XR TOOL CONNECT AREA LIGHT

GET CONNECTED. TAKE CONTROL.

DCL074-XJ - BARE UNIT Beam Pattern

Area - 360°

Max. Output

5000lm

Colour Temperature

4000K

IP Rating

54

Weight Runtime

3.8kg

DCL074-XJ

Up to 10Hrs*

399

$

FREE VIA REDEMPTION

RRP

18V XR 4AH BATTERY PACK DCB182-XE

FREE VIA REDEMPTION 18V XR 4AH BATTERY PACK DCB182-XE

DCL079-XJ

18V XR LED TRIPOD WORKLIGHT

379

$

RRP

DCL079-XJ

Compatible with all 18V XR batteries this height adjustable durable worklight is IP rated to work in the toughest conditions. Features 3 brightness settings with a neutral colour perfect for checking surface finishes.

Bulb Type Max Output

LED 3000 lm

Colour Temperature

WHEN YOU PURCHASE 18V XR LED TRIPOD WORKLIGHT

4000 K

IP Rating

55

DCL079-XJ

FREE VIA REDEMPTION

RRP

DCB183-XE

LED PIVOT TASK LIGHT

• • • •

• • • •

A SELECTED CORDLESS LIGHT DCL043-XE, DCL050-XE

100-1000 Lumen output 400m distance Articulating lamp head Up to 10 hours runtime*

99

$

RRP

LED PIVOT SPOT LIGHT DCL043-XE

WHEN YOU PURCHASE

169

$

18V XR 2AH BATTERY PACK

DCL050-XE

250-500 Lumen output 9 position articulating lamp head Broad and even beam pattern Up to 10 hours runtime*

*Runtime based on a 18V XR 5Ah Battery Pack.

19

CIRCULAR SAW BLADES C3 NEXT GENERATION CARBIDE

Up to 3 regrinds & 2x life (vs Construction range)

EXPANSION SLOTS

Dampen noise and vibration

THIN KERF

Ideal for cordless and less push force required

STRAIGHT CUTS

Minimise blade deflection

ULTRA-SHARP CARBIDE TEETH Reduces tear out

OPTIMISED GRIND ANGLES Reduces tear out

SINGLE PACKS CAT. NO.

BLADE Ø MM

BORE Ø MM

BLADE THICKNESS MM

KERF THICKNESS MM

KERF TYPE

NO. OF TEETH

RRP

DT10624-QZ

165

16/20

1

1.65

THIN

24

$28.99

DT10640-QZ

165

16/20

1

1.65

THIN

40

$31.99

DT90257-QZ

184

16/20

1

1.65

THIN

24

$31.99

DT90259-QZ

184

16/20

1

1.65

THIN

40

$38.99

DT90280-QZ

210

16/25/30

1.2

1.8

THIN

24

$39.99

DT90281-QZ

210

16/25/30

1.2

1.8

THIN

40

$44.99

DT90282-QZ

216

16/25/30

1.6

2.4

THIN

24

$39.99

DT90262-QZ

216

16/25/30

1.6

2.4

STANDARD

60

$59.99

DT90284-QZ

235

16/25

1.2

1.8

THIN

20

$39.99

DT90285-QZ

235

16/25

1.2

1.8

THIN

40

$49.99

DT90286-QZ

235

16/25

1.2

1.8

THIN

60

$64.99

ALUMINIUM OXIDE BONDED ABRASIVES

MAXIMISED LIFE. EXTREME PERFORMANCE. FEATURES Industrial aluminium oxide grain designed to maximise life and performance. oSa® accredited / Australian Standard AS 1788.11987 compliant.

High density grain concentration for longer life.

Up to 2x life (vs. High Performance bonded abrasives).

APPLICATIONS For general metal grinding work and cutting on stainless steel, ferrous and non-ferrous metals including weld and surface preparation.

FOR USE WITH

Corded and cordless angle grinders.

20

EXTREME® BONDED ABRASIVES – SINGLE PACKS CAT. NO.

DESCRIPTION

DIA. MM

THICK MM

BORE MM

RRP

DT43967-QZ

THIN FAST CUT

100

1

16.00

$1.99

DT43931-QZ

THIN FAST CUT

115

1

22.23

$2.19

DT43932-QZ

THIN FAST CUT

125

1

22.23

$2.29

DT43969-QZ

THIN CUT

100

1.2

16.00

$1.95

DT43933-QZ

THIN CUT

115

1.2

22.23

$1.99

DT43934-QZ

THIN CUT

125

1.2

22.23

$2.39

DT43938-QZ

THIN CUT

180

1.6

22.23

$4.49

DT43939-QZ

THIN CUT

230

1.9

22.23

$5.09

PRESSURE WASHERS AND GENERATORS 1360

$

RRP

2.2KVA INVERTER GENERATOR

3,300PSI PRESSURE WASHER

• • • • • •

• • • • •

DXIG2200

1045

$

RRP

DXPW3394

2200 starting watts, 1800 running watts LED fuel gauge, usage and runtime meter 22kg for easy transportation Runs at a quiet 55dB(A) for minimum operating noise 4.5L fuel tank 12V dual port USB adaptor

Honda GC190 196cc engine OEM Technologies axial cam pump 32mm heavy-gauge welded tubular steel frame 9m Steel-braided hose with kink & abrasion resistance Oversized 4-Ply pnuematic tyres

1496

$

RRP

3,600PSI PRESSURE WASHER

4,400PSI PRESSURE WASHER

• • • • • •

• • • • • •

DXPW3694

1930

$

RRP

DXPW4415

Honda GX200 Series engine Commerical grade AAA Industries Triplex Pump with brass head 32mm heavy-gauge welded tubular steel frame 9m steel-braided hose with kink & abrasion resistance Oversized 4-Ply pnuematic tyres Professional grade spray lance

DEWALT 420cc Commerical Series OHV engine Commerical grade AAA Industries Triplex Pump with brass head 32mm heavy-gauge welded tubular steel frame 15.2m steel-braided hose with kink & abrasion resistance Oversized 33cm pnuematic tyres 5 nozzles, variable pressure lance

FREE VIA REDEMPTION

WHEN YOU PURCHASE

MIDLAND SAFETY GUMBOOT

A SELECTED GENERATOR OR PRESSURE WASHER

DXIG2200, DXPW3394, DXPW3694, DXPW4415

349

$

RRP

53 LITRE WET DRY VACUUM

130 WATT PORTABLE AIR BLOWER

• • • • • •

• • • • •

DXV53P

53 Litre Poly Tub with a 10yr warranty Large 2.1m long, 64mm diameter hose 1350W 240V motor Large detachable accessories bag Heavy duty rubberized caster wheels Drain port for easy removal of liquids

189

$

RRP

DXAM2250

3 speed settings 130W 240V motor 236 Litre per second air flow 3 user positions - flat, 45 and 90 degrees Weighs 5kg

21

INTERLOCKING STACKABLE STORAGE

NEW

99

$

RRP

99

$

RRP

TSTAK™ POWER TOOL TOTE

TSTAK™ POWER TOOL BAG

• • • •

• • • •

DWST82990-1

1200D Fabric 30kg load capacity Hard base Size: 450mm (W) x 250mm (L) x 350mm (H)

DWST82991-1

1200D Fabric 30kg load capacity Hard base Size: 450mm (W) x 250mm (L) x 300mm (H)

59

$

RRP

TSTAK™ VIII DWST1-71228

• Large interior for bulk storage • 10kg load capacity

22

74

$

RRP

TSTAK™ WATER SEALED ORGANISER DWST82968-1 • • • •

IP54 water and dust resistant Removable cups for small parts, accessories and long tools Transparent lid allows content visibility Size: 337mm (W) x 440mm (L) x 119mm (H)

84

$

RRP

TSTAK™ VII • Size: 275mm (W) x 440mm (L) x 320mm (H)

DWST1-75774

• Large aluminium handle • 30kg load capacity

• Top organiser with fixed dividers in the lid for small parts • Size: 323mm (W) x 442mm (L) x 338mm (H)

INTERLOCKING STACKABLE STORAGE 74

$

RRP

TSTAK™ I

TSTAK™ III

• • • •

• Removable dividers for small parts organisation • 30kg load capacity • Size: 315mm (W) x 430mm (L) x 175mm (H)

DWST1-70704

DWST1-70705

Large aluminium handle 30kg load capacity Adaptable foam insert Size: 330mm (W) x 435mm (L) x 185mm (H)

80

$

RRP

TSTAK™ II

• Dividers for small parts organisation • 30kg load capacity • Size: 320mm (W) x 430mm (L) x 180mm (H)

• Foam insert for tool protection • 30kg load capacity • Size: 330mm (W) x 440mm (L) x 155mm (H)

DWST1-70706

DWST1-70703

74

$

RRP

TSTAK™ MOBILE TOOL BOX

• Includes removable tray for quick access to small tools and accessories • 30kg load capacity • Size: 330mm (W) x 440mm (L) x 300mm (H)

• • • •

DEWALT 500MM TOOL BAG DWST1-81342

133

$

RRP

TSTAK™ VI

FREE VIA REDEMPTION

59

$

RRP

TSTAK™ IV

DWST1-71195

69

$

RRP

DWST1-75799

Durable 7" wheels 30kg load capacity Roll up to 50kg with the telescopic handle Size: 512mm (W) x 435mm (L) x 1000mm (H)

WHEN YOU PURCHASE ANY 2 DEWALT TSTAK STORAGE SYSTEMS

23

THE ULTIMATE TRADIE TRUCK TO

WORK PLAY HARD HARDER.

PURCHASE ANY DEWALT

WIN

PRODUCT FOR A CHANCE TO

A

1500

*

VALUED AT $179,000

ONE ENTRY FOR EVERY $1 SPENT

ENTER VIA WWW.GUARANTEEDTOUGH.COM.AU

*Conditions apply. For full terms and conditions visit www.guaranteedtough.com.au. Promotion valid from 13/06/2019 until 31/12/2019. Retain original receipt/s. Prize is a modified RAM 1500.

NSW Permit No. LTPS/19/35313. ACT Permit No. TP19/03520. SA Permit No. T19/924

DEWALT 810 Whitehorse Road Box Hill VIC, Australia 3128 Telephone: 1800 338 002 Fax: 1800 080 898

www.

Your DeWALT Dealer:

.com.au

Accessories as a trademark. DEWALT reserves the right to change any deal, price and / or specification at any time without notice. All products quoted are inclusive of GST. Price includes GST unless otherwise stated.

Onsite Offers promotion runs from 01/10/2019 - 31/01/2020.

Deals available while stocks last and only at participating stores.

REGISTER AT Be the first to see product news and special offers from DeWALT. Register at MYDeWALT to be sent onsite offers by email.

Simply go to www.DeWALT.com.au/MYDeWALT

MY