Skip to main content

Picture Framing Magazine - November 2020

Page 1

FRAMING PUZZLES: THE LATEST TREND

Creative CMC Designs Picture Lights: Everything You Need to Know


Contents

PFM is a member of:

Volume 31, Number 11

PPFA, The Professional Picture Framers Association ACC, Art Copyright Coalition SOG, Society of Gilders

On the Cover

With people spending more time at home this year than in years prior, puzzles have seen a resurgence in popularity. Puzzles, which can take hours or even days to assemble and carry emotional value, are the perfect candidates for custom framing. For the full story, see page 18.

Picture Framing Magazine® (ISSN 10529977) is published monthly, plus one issue by PFM Publishing, LLC, 83 South Street, Unit 307, Freehold New Jersey 07728; phone 732-536-5160; fax 732-252-2270. Subscription Office: Picture Framing Magazine, PO Box 612, Northbrook, IL 60065-0612; phone 888-238-0049. Subscription: $20 per year U.S., $40 U.S. Dollars per year in Canada and Mexico, $60 U.S. Dollars per year for all international. Single copies, $5.95. If a paid subscription magazine is returned by the U.S. Postal Service as non-deliverable, Picture Framing Magazine will maintain the subscription for one year. If after one year a new address is not provided, Picture Framing Magazine will cancel the order. No refund will be available for that account. Periodicals class postage paid at Freehold, New Jersey, and at an additional mailing office. Entire contents © 2020 by PFM Publishing, LLC. Printed in U.S.A. Picture Framing Magazine registered in the U.S. Patent and Trademark Office. Postmaster: Send address changes to Picture Framing Magazine, PO Box 612, Northbrook, IL 60065-0612 Agreement Number 1691910

Photo courtesy of Mark Klostermeyer, MCPF

Features 18 Puzzles: Your Frame Shop's Missing Piece 24 Picture Lights: A Bright Idea for Boosted Holiday Sales

Columns 12 Mat Doctors 28 Successful Retailing Panel 38 Style Snapshot

24

Departments 8 10 32 34 35 36 37

Editor’s Note Industry News Product Showcase Distributor Spotlight Crossword Puzzle Index of Advertisers Crossword Solution

12

18

Disclaimer The opinions and information in this magazine are not necessarily those of the publisher and are therefore not to be viewed as such. No part of this magazine may be reproduced without the expressed written consent of the publisher. PFM does not knowingly accept false or misleading advertising or editorial, nor does the publisher assume any responsibility for the consequences that occur should any such material appear. PFM and PFM Publishing assume no responsibility for content, text, or artwork of advertisements appearing in PFM except those promoting PFM. The Publisher reserves the right to review all advertising materials submitted for publication and to not accept any such material deemed inappropriate for any reason.


PFM Publishing

330 Mounts Corner Dr. #313, Freehold, NJ 07728 • Phone 732-536-5160 • Fax 732-252-2270

PICTURE FRAMING MAGAZINE www.pictureframingmagazine.com Bruce Gherman • bgherman@pfm-group.com • 848-444-5202 Kimberly Biesiada • kbiesiada@pfm-group.com • 848-231-3510 A RT D I RE C TO R Jin Dong • jin@wcafexpo.com • 848-231-4082

E X E C U TI V E PU BLI S HE R E D I TO R

CONTRIBUTORS

Jay Goltz • PRE S E RVATI O N E D I TO R Hugh Phibbs • M O U N TI N G E D I TO R Chris A. Paschke, CPF, GCF M AT D O C TO RS Tim Franer, CPF • John E. Ranes II, CPF, GCF • Brian Wolf, CPF William B. Adair • Ken Baur • Jared Davis, MCPF, GCF Paul MacFarland, MCPF, GCF • James Miller, MCPF, GCF

B USI N E S S E D I TO R

ADVERTISING SALES

sales@pfm-group.com • 848-444-3058 Bruce Gherman • bgherman@pfm-group.com Rob Gherman • robgherman77@gmail.com CIRCULATION D I RE C TO R O F A U D I E N C E D E V E LO PM E N T

Maureen Robertson • maureen@wcafexpo.com PRODUCTION

A D V E RTI S I N G C O O RD I N ATO R

Jin Dong • ads@pfm-group.com

SUBSCRIPTIONS TOLL FREE: 888-238-0049 pictureframing@omeda.com

WEST COAST ART & FRAME EXPO • NATIONAL CONFERENCE A division of Hobby Pubco • www.wcafshow.com

Deborah Salmon • dsalmon@wcafexpo.com Maureen Robertson • maureen@wcafexpo.com TRA D E S HO W C O O RD I N ATO R Gary Coughlin • gary@wcafexpo.com C O N F E RE N C E C O O RD I N ATO R Alan Pegler • alan@wcafexpo.com

TRA D E S HO W D I RE C TO R E X HI BI TO R S E RV I C E S

WCAF EXPO SALES

sales@wcafexpo.com

CONTENTS

PFM PUBCO • BOOK DIVISION BOOK SALES COORDINATOR

pfmpubco@pfm-group.com

AD INDEX

PFM PUBLISHING, LLC PRE S I D E N T

6 PFM November 2020

Bruce Gherman


FROM THE EDITOR’S DESK

A

Data shows that most consumers still plan to do their holiday shopping this year, and many want to shop small. Now is the time to gear up to meet the demand.

CONTENTS AD INDEX 8 PFM November 2020

re you and your business ready for the season? With the continued impact of Covid-19 on our everyday lives, small business owners worldwide are hoping the winter holiday months will bring a boost in sales. Fortunately, it seems most people still intend to make their lists and check them twice; a recent study conducted by Visa* found that 88% of consumers plan to do their holiday shopping this year despite challenges created by the pandemic. Of those, nearly a quarter plan to shop mostly at locally-owned businesses, and more than a third plan to split their shopping equally between locally-owned business and larger retailers. This is good news for small and micro businesses (SMBs,) the majority of whom (60%) say they are taking steps to prepare for this major sales opportunity. More than a quarter of SMBs expect to extend business hours to prepare for an influx of holiday season sales, followed by digitizing parts of the business operation and investing in physical infrastructure. If you already have your holiday hours, in-store displays, and online presence ready to go, it might be worth looking at items you can add to your framing orders to further boost profits.

One accessory item worthy of consideration is the picture light. Available in a range of sizes, styles, and finishes, they can make any framing project look truly special, and suppliers say they are often an impulse buy. See page 24 for the full story, including the experts’ advice on how to sell picture lights to your customers. Have you been framing many puzzles lately? Data shows puzzles have enjoyed a boost in popularity in the year of social distancing. Mark Klostermeyer, MCPF, makes the case for why you should be offering to show off your customers’ jigsaw masterpieces with custom frame designs (p. 18). Those stories and more await you in this issue, our second to last of the year. As you ride full steam ahead toward year’s end, I hope you enjoy a happy and healthy holiday season— including a healthy bottom line! * “Visa Back to Business Study Holiday Edition” usa.visa.com/ dam/VCOM/blogs/visa-back-tobusiness-study-holiday-sep20.pdf

Kimberly Biesiada Editor


INDUSTRY NEWS EnCore Acquired by 3A Composites USA 3A Composites USA acquired the Elmer’s and EnCore foamboard division from Newell Brands on Sep. 1, thereby broadening its product offering to the display, graphic arts, and framing markets. With this expansion, 3A Composites endeavors to integrate the knowledge and expertise of both companies. The resulting combination positions 3A Composites as an industry-leading supplier with a wide range of foamboard products, world-class manufacturing capabilities, and unparalleled customer service. 3A Composites USA looks forward to providing customers the same great service and products during this transition. For more information, visit 3acompositesusa.com and click on “News” under “About Us.”

bition, titled “Studio Berlin,” was organized by art collectors Christian and Karen Boros along with art curator Juliet Kothe. Featured artists include established figures such as Olafur Eliasson, Tacita Dean, and Wolf-

Berghain - “Tomorrow is the question”

gang Tillmans and younger names like Shirin Sabahi, Christine Sun Kim, and Sandra Mujinga. The collaboration between the club and the art world is one of many attempts to preserve Berlin’s nightlife during its forced hiatus. Berghain closed to the public on March 11, shortly before German authorities mandated the closure of all such businesses.

Framerica Welcomes Kyle Clancy

Famed Berlin Nightclub Reopens as Art Gallery

Kyle Clancy has joined Framerica’s customer ser-

After shuttering for several months due to the coronavirus pan-

vice team, bringing a wealth of knowledge and

demic, Berlin’s storied Berghain nightclub reopened its doors as a temporary art gallery on Sep. 9. The 3,500-square-meter venue, which includes a dance floor and the Panorama bar, is set to house works from 117 Berlin-based artists through December, according to the company. The exhi-

CONTENTS AD INDEX 10 PFM November 2020

experience to the position. “Kyle has been an outstanding addition,” notes Lisa Olsen, Framerica’s head of customer service. “He made an instant positive impact for our team and our customers.” PFM

Kyle Clancy


THE MAT DOCTORS

By Brian Wolf, CPF, GCF

Overlapping Openings A technically easy and visually effective device that adds to a design.

A

recurring question in the world of custom framing is, what are other ways framers can add decorative

elements to matting without settling for the typical cutout in the top mat? My answer is simple: overlap the items. One philosophy of composition holds that an arrangement should appear to be one whole, not scattered pieces. The tactics to accomplish this in a mat design might be for all the items to be in closely spaced orderly rows, or their collective outside borders might form a tidy rectangle—or the items could overlap. Simply overlapping on the design screen is not enough. Overlapping becomes a viable design device because CMC software can also merge the overlapping items into a single new shape. Every CMC program will have a different term for this merging, and it will function in different ways. In the Wizard software, there is a button to click called Group Selection.

Openings Overlapping a Letter

CONTENTS

Monograms are common in all the decorative

ter be larger. Pieces of it will be missing where

arts. Letters can be such pretty shapes, and too

the openings overlap, and the letter still needs

often in mat design, letters have been relegat-

to be identifiable and attractive.

ed to diminutive afterthoughts at the side of an opening. When openings overlap letters,

Technical Considerations

though, it is almost a requirement that the let-

When items overlap, cutting problems may

AD INDEX

Brian Wolf began framing pictures while attending Iowa State University. In 1973, he won the Janice Petersen Andersen award for outstanding design student. He began demonstrating his hand-carving technique for mats at conventions and teaching for the PPFA. Brian started his own framing business in Cedar Rapids, IA, in 1983. Since 1989, he has focused on leading workshops around the world on his matting techniques. He has authored books, appeared in videos, and contributed to trade magazines. He joined Wizard International, where he contributed his artistic touch to product development. He continues his work with Wizard through education, events, and design content.

12 PFM November 2020

Think of these constructed ornaments as vehicles for adding color accents. The trapezoids create angled wide spots at the sides of the reveal that are 0.13'' wide and 2.75'' high. The bottom layer of the triangles open 0.35'' wide spots in the bottom layer for the blue accents. Every template library has a dozen straight and curved shapes that can be added as accents like these. This art deco illustration is ripe for this kind of ornament, but it is surprising how universal geometric accents are if the colors and sizes are right.


ware merges the overlapping shapes. This possible overlapping is normally checked by the desire for the letter to remain readily identifiable. Still, be watchful. The large circle at the left shows a spot that is unrelated to overlapping, but it is a persistent concern as openings and decorative items are arranged. There is a small separation between the tail of the letter and the opening. These small separations need to be at least 0.2 inch. The overcuts on the back of the mat will continue past the bevel. If another opening is too close, these overcuts might be visible as nicks in the adjacent bevel. Or the overcuts might slice up the narrow strip of matboard between the items, making handling the mat during assembly risky.

Diamonds Linking Openings A row of openings is a daily project. Variations are always welcome. Here are two suggestions: Fanning is a tool that lines up the openings and rotates each item differently to distribute the items along an arc. If there is not a fanning utility in every CMC’s software, there is certainly a rotation tool. The second variation is the overlapping diamonds between the openings. Many different shapes could be used between the openings for various decorative effects. Top: When openings overlap letters, the letter can be larger. Parts of it will be hidden under openings, and it needs to be identifiable. This S is 3.75” high—significantly larger than its minimum recommended height of 1.5”. Think of what might be included in the blank areas: more openings, keepsake paper items, handwritten inscriptions. Bottom: As the items are moved to visualize different arrangements, watch the circled areas. The small circles show spots where angles may become too sharp, the middle size circles show spots where the openings should not overlap the curves of the letter, and the large circle shows a spot where the separation cannot be smaller than 0.2” without causing structural problems.

More Technical Considerations Much like the previous project, there are points to watch as these diamonds overlap (p. 16). The small circles across the top show reminders that overlapped intersections should not generate sharp angles. They also illustrate the reverse of the final point in the previous example; just as the strip of matboard between items needs to be at least 0.2'', the gap in a cut formed by overlapping items—these dia-

arise. In the S project, as with most overlapping projects

monds, for instance—also needs to be at least 0.2''. Once

involving curved elements, there are three things to watch;

again, the overcuts on the back of the mat continue past

the illustration above has circles that point these out.

the bevel. If the gap is too narrow, these overcuts may nick

The three small circles show intersections where an-

the bevel on the other side of the gap.

CONTENTS AD INDEX

gles might be formed that are too sharp to cut nicely. This

The large circles at the bottom show yet another situ-

particular arrangement shows angles that will cut fine,

ation where items need to be far enough apart that struc-

but imagine the letter and the openings moved farther

ture of the finished mat is not impaired. Visually, the bot-

apart. As the openings intersect different points on the

tom corners in a fanned arrangement look best if there is

curves, the angle of the intersection becomes more and

more than the required 0.2'' separation on the top layer.

more pointed. The bevel would become delicate, and it will

In this example, the separation is 0.375'' on the top layer.

self-destruct as it is being cut. The two mid-sized circles show spots where the sides

Building an Ornament

of the openings should not touch—and certainly not over-

Even with all the letters and silhouette cutouts in the CMC

lap—the curves of the letter. If they do, unsightly flat spots

programs’ libraries, the perfect addition for a particular

would be joined into the curves of the letter as the soft14 PFM November 2020


Extreme Savings™

/ $0.89/ft. 10681 Gloss

OFFER EXPIRES 12/31/20

$0.75/ft.

10682 Gloss

10676

10678

10680

10679

10677

10686

10684

PARK SLOPE

TM

$1.39/ft. 10688 Gloss

$1.29/ft.

10689 Gloss

10683

10687

10685

$2.19/ft. 10701 Gloss

$1.89/ft.

10702 Gloss

10696

10698

10947

10700

10697

10699

$1.59/ft.

10104

15/8” deep

10105

10759

15/8” deep

17/8” deep

8683

10465

17/8” deep

15/8” deep, gold side

10466

15/8” deep, silver side

eep

15 /16” d

17 /16”

$1.25/ft. 10496

10497

deep

$1.35/ft. 10692

Prices shown are for 50 foot length min/style

10942

10498

10499

Phone: 631-231-5959 • 1-800-937-1055 • Fax : 631-231-5034 • 1-800-937-0006


Extreme Savings™ 6661

8444

9471

$1.69/ft. 8057

$1.99/ft. 9472

8800

10187 10188 $0.71/ft

6607

$1.45/ft. 6662

10782

$1.25/ft 10783

6353

8981

6301

$1.99/ft.

$0.91/ft 6352

CONTENTS AD INDEX

$1.29/ft. 11009 8080

$2.99/ft. 8081

11006

11010

Prices shown are for 50 foot length min/style Phone: 631-231-5959 • 1-800-937-1055 • Fax : 631-231-5034 • 1-800-937-0006 order@decormoulding.com OFFER EXPIRES 12/31/20


Extreme Savings

/

™

11191

11192

11157

$0.65/ft. 11158 11159

11023

$0.95/ft. 11194 11195

11193

order@decormoulding.com OFFER EXPIRES 12/31/20

11196

11197

11198

11238

$1.09/ft. 11024 11025

5019

$1.39/ft. 5018

11106

$0.69/ft. 11098

11026 bbet

1” Ra

11107

ALBA

11027

1

11113

$1.09/ft 11112

11030 11096

1

10780 $1.05/ft.

10779 Gloss $1.35/ft.

10772 Gloss $1.35/ft.

$0.99/ft. 11105

bet

ab /”R

5 8

10778 $1.05/ft.

$0.41/ft. 6183

2007

10897 $1.35/ft.

$0.45/ft. 6184

10785 $1.19/ft.

10896 $1.19/ft.

10898 $1.35/ft.

2008

t

abbe

R 1/” 5 8

10781 $1.19/ft.

bet

Rab

1 /2”

TM

$1.89/ft. 11028 11029

$0.79/ft. 11099

$0.49/ft. 6185

2009

/1

15

et

bb

ra 6”


/ 9450

Extreme Savings™

$0.45/ft. 10777

t

bbe

” Ra 1 / 13 16

10660 10659 $0.99/ft. 8694

t

abbe

1” R

$0.47/ft. 8989 t abbe

11306

$1.29/ft. 11307

2” r

8693

9440

$0.65/ft. 8990

$0.75/ft.

10727 $1.19/ft.

9919

11082

1” rabbet

8811

8446

10728

$1.01/ft. 10493

$0.61/ft. 8993

9999 Stretcher Bar 21/2”W x 1”H $0.79/ft.

$0.75/ft. 10822

CONTENTS

9821 Stretcher Bar 11/2”W x 2”H $0.71/ft.

AD INDEX

10336

$1.01/ft.

10988

10625 w/Notch 11/8”W x 15/16H” $0.47/ft.

9820 Stretcher Bar 11/2”W x 13/8”H $0.54/ft.

8609 Stretcher Bar 15/8”W x 9/16”H $0.31/ft.

8411

10647 $0.63/ft.

$0.49/ft.

11128 Stretcher Bar 9960 Stretcher Bar 2”W x 17/16”H 11/4”W x 13/16”H $0.71/ft. $0.31/ft.

10573 Stretcher Bar 2”W x 1/2”H $0.39/ft. DUAL-PURPOSE STRETCHER BAR 10731 11/2”W x 3/4”H $0.39/ft.

10861 Bar 8610 Stretcher Bar Stretcher 1 8”W x 2”H 1 13 1 / 2 /4”W x /16”H $0.53/ft. $0.69/ft.


Decorative elements can be assembled from tiny opening shapes. The trapezoids are 2.75” high and 1” wide. The triangles have two layers with a 0.11” reveal. They are 0.35” high and wide. Once all the parts are in place, merge them into one shape.

zoid and a triangle. The trapezoid is a single layer so that it adds a wider vertical area to the sides of the inner reveal. The triangle is a two-layer opening so that there is a cutout in the bottom layer for an accent color. Customers would find more things that need framing Top: The three openings and the four diamonds are lined up and fanned in the software. The items are spaced close enough that the diamonds overlap and connect the adjacent openings. For reference, the outer diamonds are rotated 12°, the small openings 9°, and the inner diamonds 5°; gentle fanning to keep the presentation elegant. Bottom: The center opening is 4'' x 6''; the outer openings are 2.5'' x 4''. The diamonds are 1.25'' x 0.8'' high. The small circles show spots where angles should not become too sharp. The overlapping diamonds must also create a gap of at least 0.2'' in the sides of the openings to avoid cutting problems. These fanned arrangements look better if they are separated even farther; here they are 0.375'' apart.

picture is often elusive. But surprising things can be built using the most basic resources. Think of these ornaments less as artistic expositions and more as vehicles to add and expand spots of color. The programs’ template libraries have geometric shapes galore that can be easily manipulated into the necessary size, shape, and position. Overlapping and merging are then the keys to integrating these shapes into the opening. The ornaments seen in the design on page 12 were constructed using two different template shapes; a trape-

CONTENTS AD INDEX 16 PFM November 2020

if they knew how eye-catching and unique presentations could be. Overlapping is a technically easy and visually effective device that can change the attitude and add color— particularly with multiple-opening projects, when framers are almost always called upon to be the artist. PFM


Product Showcase AccuMount Tools

AccuMount Tools

The Keyhole Companion marks keyhole slot fastener locations on the mounting surface (ex. wall), eliminating the need for measuring or generating templates. The tools mount in the keyhole slots, allowing the object itself to be used as its own template. Available on Amazon.

The T-Screw Companion marks T-screw locations on sheetrock/ wood. Self-centering tool can mount on T-screw bracket while frame is hanging. Pushing on the frame at the location of the tool marks the T-screw location with a divot (pointed depression). Available on Amazon.

Call: 408-867-3030 www.accumounttools.com

Call: 408-867-3030 www.accumounttools.com

Decor Moulding & Supply

Delta Picture Frame Co.

Introducing Nantucket, a beautiful new line of six nautical-inspired rustic wood styles available in two widths of 1 5/8'' and 2 1/2'', with a rabbet height of ½''. The eye-catching feature of the Nantucket collection is the accent rope inlay which complements the distressed wood tones of rustic white, rustic brown and rustic gray. Order corner kit #CS-NAN to get these six styles on your wall immediately.

B5925 is a 1 ¾'' black moulding with a raised silver lip. You will find this moulding matches a wide variety of art and photography. For samples and pricing, please speak with your sales representative or call the office. Call: 800-327-5482 www.deltapictureframe.com

Call: 800-937-1055 www.decormoulding.com

Framerica

Michelangelo Moulding

Ocean Blue is the newest addition to Framerica’s Solids Collection. “Blue is both trendy and timeless,” notes VP Josh Eichner. “We worked with various interior designers to perfect our ‘Ocean Blue.’” Ocean Blue is a Framerica exclusive.

Michelangelo recently launched an abbreviated series of tall, stemmed mouldings. Due to the trade’s favorable acceptance, they are adding three more finishes to the 331 Wood Series. In addition to gold leaf, silver leaf, gun-metal gray, and black, they now have brown barnwood, bronze, and white finishes. Stock available for sampling.

Call: 800-372-6422 www.framerica.com

Call: 877-422-8812 www.michelangelomoulding.com

CONTENTS AD INDEX

Omega Moulding

Penny Lane Publishing

Edge by Omega Moulding is a collection of multi-use, modular mouldings that can be used to create standard traditional frames or to serve as floater frames for graphic arts media such as face-mounted acrylic prints and other panel-mounted work. Available in both black and white finishes (wood mouldings) and in aluminum (extruded metal).

Christmas artwork from Imperfect Dust! Contact a sales representative by phone or by emailing info@ pennylanepublishing.com for more information. All artwork also available on canvas and wood products. Select images are also available as large format giclée prints. Stock code: DUST729 “Fresh Cut Christmas Trees.” Size: 12'' x 12''. Retail price: $12.

Call: 800-289-6634 (US) 877-452-3799 (Canada) www.omegamoulding.com

32 PFM November 2020

Call: 800-273-5263 www.pennylanepublishing.com


Sepp Leaf

Superior Moulding

Mixol Universal Tints. Do you need to tint grain/wood filler, putty, paint, stain, wax, shellac, lacquer, or poly? Turn to Mixol for your custom color needs. Mixols come in 33 colors, plus three metallics. They won’t dry out or harden in your shop. They tint water, solvent, and quality oilbased products. Imported from Germany by Sepp Leaf Products. Available at www. rockler.com.

Superior introduces Tempest, one bold profile in six industrial finishes, reminiscent of aged metals. The wedge profile and distressed metallic finishes work well on modern art as well as contemporary oil landscapes. Request a color catalog online or call for samples and pricing. Call: 800-922-7914 www.supermoulding.com

Call: 212-219-0770 www.seppleaf.com

Tru Vue

Universal Arquati

Optium Museum Acrylic is now available in smaller, single-sheet sizes, making it easier for you to offer the best glazing for any project. Suggested retail pricing is available, and product is stocked coast to coast. Request a sample kit, find a distributor, and get complete details at tru-vue.com/ optium.

Introducing a new size to Universal Arquati’s successful gesso-free line: ¾'' x ¾'' Italian Prime! This Italian-made moulding’s new profile features opengrain, high-gloss, and matte finishes in a variety of colors. This profile is economical, gesso-free, and great for many uses with small pictures, inner frames, and photography. This product is now in stock! Please contact your local sales representative to get a sample set.

Call: 800-282-8788 www.tru-vue.com

Call: 800-668-3627 www.universalarquati.com

PFM November 2020 33


Turn static files into dynamic content formats.

Create a flipbook