pewag AGWW/AGWP Load distributors for maximum load capacity

November 2016

AGWW/AGWP

Load distributors for maximum load capacity Application: • For 4-leg chain slings to optimize the weight distribution • For two 2-leg chain slings – minimum one is using the load distributor

Advantages: • Increasing the load capacity of 4-leg chain slings • Patent-pending load distributor • In case of wear turning by 180° enables double life time • Load capacity up to 75,000 kg (up to 26 mm) • Cost effectiveness • Chain slings in G10 using the load distributor always replace chain slings in G8 of the next bigger size without load distributor • In some cases downsizing in chain diameter by one dimension within G10 is possible

application video

Example for pewag winner: Chain

Load distributor

IV- leg chains 0° – 45°

IV- leg chains 45° – 60°

Master link

WIN 10

No

8,000 kg

6,000 kg

VW 10

AGWW Load distributor

WIN 10

Yes

11,200 kg

8,000 kg

VW 13

WIN 26

No

56,000 kg

40,000 kg

VW 26

WIN 26

Yes

75,000 kg

53,000 kg

VW 32

Chain

Load distributor

IV- leg chains 0° – 45°

IV- leg chains 45° – 60°

Master link

WINPRO 10

No

10,600 kg

7,500 kg

VMWP 13/10

WINPRO 10

Yes

14,000 kg

10,000 kg

VMWP -/13

Example for pewag winner pro:

AGWP Load distributor

Customer information pewag winner AGWW and pewag winner pro AGWP Load Distributors

1

November 2016

Code

Connex*

h e

h1

AGWW 5/6

CW 8

AGWW 7/8

AGWW 10

Weight

[kg] 1,400

148

35

16

22

11

9

6 for 5 mm chain 5 for 6 mm chain

0.54

3,550

2,500

210

51

22

25

15.50

14

6 for 7 mm chain 5 for 8 mm chain

1.75

5,600

4,000

180

32

25

32

23

15.50

4

1.56

WLL a 45° – 60°

[kg] 2,000

CW 10

CW 13

AGWW and AGWP Load distributor s

Difference L1/L2 [chain [mm] [mm] [mm] [mm] [mm] [mm] links]

WLL 0° – 45°

e

d1

d2

h

h1

d2 d1 a

h e

s

h1

AGWW 13

CW 16

9,500

6,700

240

53

32

40

27

20

4

3.60

AGWW 16

CW 19/20

14,000

10,000

300

77

40

50

32

25

4

7.18

AGWW 19/20

CW 26

20,000

14,000

390

79

50

70

45

30

5

13.20

AGWW 22

CW 32

26,500

19,000

350

124

60

70

50

35

5

15

AGWW 26

CW 32

37,500

26,500

400

130

70

75

60

40

4

25.60

AGWP 7/8

CWP 10

4,250

3,000

210

51

22

25

15.50

14

6 for 7 mm chain 5 for 8 mm chain

1.75

AGWP 10

CWP 13

7,100

5,000

180

32

25

32

23

15.50

4

1.56

d2 d1 a

* Please use this Connex to assemble the load distributor in the four-leg sling.

Static test coefficient = 2,5 x load capacity of the respective chain section; safety factor = 4

Safety factor 4

IV- leg chains with load distributor

Angle of inclination β

0° – 45°

45° – 60°

Load factor

2.8

2

Code

[kg/pc.]

d

Load capacity [kg]

WIN 5

5

2,800

2,000

WIN 6

6

4,000

2,800

WIN 7

7

5,300

3,750

WIN 8

8

7,100

5,000

WIN 10

10

11,200

8,000

WIN 13

13

19,000

13,200

WIN 16

16

28,000

20,000

WIN 19

19

20,000

14,000

WIN 22

22

26,500

19,000

WIN 26

26

37,500

26,500

WINPRO 7

7

6,700

4,750

WINPRO 8

8

8,500

6,000

WINPRO 10

10

14,000

10,000

If the chain slings are used in severe conditions (e.g. high temperature, asymmetric load distribution, edge load, impact/shock loads), the maximum load capacity values in the table must be reduced by the load factors.

pewag austria GmbH A-8041 Graz, Gaslaternenweg 4, Phone: +43 316 6070-0, Fax: +43 316 6070-100 office@pewag.com, www.pewag.com

Technical changes and misprints are subject to alteration.

Customer information pewag winner AGWW and pewag winner pro AGWP Load Distributors

2

DS/16/00051

Please also note the user information on different conditions of use and their effects on the load capacity values!