Brand
Inverted Head
(Underneath Hydraulics)
EXTRUDER
250 / 450 (60 Ton)
300 / 700 (88 Ton)
700 / 1200 (135 Ton)
700 / 1600 (189 Ton)
Screw Diameter Inch (mm)
1.77 (45)
2.16 (55)
2.75 (70)
2.75 (70)
L/D Plastification Rate Grams / Sec. Optional Extruder Screw Grams / Sec. CLAMP
22:1 24 / sec 30 / sec 250 / 450
24:1 30 / sec 40 / sec 300 / 700
24:1 42 / sec 55 / sec 700 / 1200
24:1 42 / sec 55 / sec 700 / 1600
Blow Clamp Tonnage US Tons / KN
8.43 (75)
12.3 (110)
22.4 (200)
22.4 (200)
Injection Clamp Tonnage US Tons / KN
51.7 (460)
78.6 (700)
135 (1200)
180 (1600)
Clamp Open Stroke Inch (mm)
4.7 (120)
5.0 (127)
5.0 (127)
5.0 (127)
Maximum Die Set Width Inch (mm)
24.4 (620)
31.5 (800)
44.9 (1140)
44.9 (1140)
Mold Stack Height Inch (mm)
9.44 (240)
10.00 (254)
10.00 (254)
10.00 (254)
Maximum Swing Radius Inch (mm)
19.0 (485)
24.0 (610)
30.7 (780)
30.7 (780)
Trigger Bar Length Inch (mm)
17.9 (456)
25.9 (660)
38.9 (988)
38.9 (988)
Machine Center of Pressure Inch (mm)
14.1 (360)
16.5 (420)
21.6 (550)
21.6 (550)
2.89
2.89
3.0
3.0
38.3
50.7
102.1
102.1
23
34
43
45
105 (400)
105 (400)
150 (568)
105 (568)
30 (22)
40 (30)
75 (55)
75 (55)
Chilled Water Requirement Gal/Min/Deg F
10 / 50
20 / 50
25 / 50
25 / 50
Tower Water Gal/Min/Deg F
15 /75
25 / 75
25 / 75
30 / 75
150 / 18
150 / 25
150 / 35
150 / 35
157.5 x 59 x 78.7
159 x 63 x 72.8
178 x 81.5 x 78.3
178 x 81.5 x 78.3
5
9.5
17
17.1
Dry Cycle Sec. UTILITIES Total Electrical KW Average Running Load KW Hydraulic Reservoir Capacity Gal (L) Main Motor
HP (KW)
Air Pressure Required PSI / SCFM Machine Dimensions L x W x H Inches Machine Weight US Tons
www.petallmfg.com
- All oil below the mold and bottles - No drops or contamination - Clean room facility machine
- On pivot for quick change of screw and cleaning of machine
- Giving better control over sensitive materials
- Timer Injection feeding or position based injection control - Machine does 3. & 4., on demand
-Table is 8” thick, cast (not welded) of modular fatigue resistant steel - The bar diameters are larger than other tie bar systems
- Complete turnkey installation of in-house supplied molds, machines, leak-test, pack out, vision inspection and metal detection - Only company worldwide offering a total line
- Manufactured in arguably the world’s most advanced blow mold machine facility supplying multinational companies worldwide
- Opens up EBM Market and new business - Clamp system ensures more even pressure on full length of mold than competitive “C” frame design and avoids frame cracking
- Up to 20% less power usage than some major competitors, leading to lower running costs.
- Outstanding price-quality ratio and investment return pressure
- Training school available lower running costs
Pet All Mfg. has been supplying IBM Can Mold Brand machines worldwide for over 10 years. The machines created and integrated by Pet All Mfg., are manufactured at a state of the art facility by our manufacturing partner who has the utmost modern facility and machine building technology. This includes machines built for Tetra Pak. This plan ensures that we are able to manufacture the best IBM machines available in the market today with very competitive prices.
Pet All Manufacturing Inc. / Can Mold – Head Office 85 Royal Crest Court Unit 1-2 Markham, Ontario L3R 9X5, Canada Phone: 905-305-1797 Fax: 905-305-0013 Website: www.petallmfg.com.com Email: cmerrick@petallmfg.com
Pet All USA Inc. Business Center 407 S 107th Ave Unit A-10 Tolleson, AZ 85353 Phone: 480-236-9785 Email: barce@petallmfg.com USA Showroom / Engineering Centers - Williamstown, NJ - Adrian, MI