angličtina

Description of spaghetti bridg.

I used one and a half packets of spaghetti a hot glue and I also used rubber bands

I started by counting twenty spaghetti and tying them together on both sides with rubber bands, I repeated this process six times. Then I took three of this bunchs and glued them together I repeated it one more time, between them I gave a couple of spaghetti for the better strength of the bridge. Then I went on the sides of the bridge, i counted twenty spaghetti again and tied them up, I repeated this 16 times, then I cut four bunches in half and I created eight small ones.

From the prepared bunches i gule both sides of the bridge.

I had finished gluing with the hot glue bouth sides of the bridge to the lower structure and then putting a couple of spaghetti between them again for the better strength of the bridge

I did a bit of finishing at the end.