Description of the worklflow

First, I drew a bridge on a paper using a ruler, the way I wanted it to look. After that, I made spaghetti rolls using hercules glue. I took some spaghetti, tied it together with rubber bands on each side of the roll and coated it with several layers of glue (it serves as the side wall of the bridge). I stacked several (61) spaghetti next to each other, I painted them with several layers of glue and let to dry. After the plates had dried, then I glued them together and one large plate was created, which I then cut to the length specified by the model ( it serves as the main part of the bridge).

I cut the dried rolls. Then I glued everything together and a bridge was created. The bridge weights 927 g and it will hold two half-kilo weights or one kilo.