Catalogue 2015 2016 local communities green and urban spaces 3

Catalogue 2015 - 2016 

Local communities - Green and urban spaces



Local communities Green and urban spaces

Quartier Notre Dame - Route de Cavaillon - BP 47 - 84122 Pertuis Cedex - France

ENG- 03/2015 - 120095

PELLENC S.A.

Catalogue 2015 - 2016

Distributor’s stamp

Tel.: +33 (0) 4 90 09 47 00 - Fax: +33 (0) 4 90 09 64 09 - E-Mail: pellenc.sa@pellenc.com - www.pellenc.com

120093_CATALOGUE GCT 2015_COUV ENG.indd 1

25/02/2015 17:00:42

Special thanks: Jardins d’Albertas - Aix-en-Provence - www.jardinsalbertas.com

Patented Equipment. The technical specifications and photographs are provided for informational use only, and are in no way contractually binding.

PELLENC reserves the right, without prior notice, to make any modifications and improvements it deems necessary to its products.

For your safety, PELLENC recommends to the users to refer to the manual supplied with the tools.

Photo credits ©PELLENC — Design: PELLENC communications department.

120093_CATALOGUE GCT 2015_COUV ENG.indd 2

25/02/2015 17:00:42

contents

The company Foreword

4

Awards 5 An international network

6

Industrial organisation

8

The company and its departments

10

technology and design

12

Website and social networks

112

our professional tools batteries

ULTRA LITHIUM BATTERY ULiB 16

chargers

solerion 24

lighting mower blower hedge trimmers brush cutter

standard and rapid chargers

26

Power convertor 1000

27

lumenion 28 rasion

new

cultivator PRUNERS

pruning shears

20140126_catalogue GCT 2015_EN.indd 3

30

airion 38

new

46

excelion 2000

54

helion

city cut LAWNMOWER

new

62

excelion 1200

64

cultivion 72 Selion c21 HD

new

80

Selion M12

88

Selion pole

96

treelion

104

26/02/2015 16:32:14

foreword

PELLENC is awarded for its innovation by the Ministry of the Environment

Since its inception in 1973, the PELLENC Group has based its development on a policy of constant innovation in order to anticipate changes in its markets and offer customers increasingly efficient products.

A forerunner when it comes to lithium-ion technology and high efficiency "Brushless" motors, PELLENC has established itself in the "Zero Emission" professional power tools market. The combination of these two technologies makes it possible to eliminate direct emission of greenhouse gases and significantly reduce noise. It thus meets the users' requirements for comfort and sustainability while offering excellent cost efficiency. This was recognised by the "Large Enterprise Award" given to PELENC in 2014 by the Ministry of the Environment.

The mastery acquired thanks to more than 10 years of experience with these technologies has enabled PELLENC to develop the most comprehensive range on the market making it a reference in terms of performance, acquired, lightness and durability.

2015 marks a turning point for PELLENC with the arrival of several new features, including our first mower, the RASION Basic, remarkable for its speed, lightness and ease of driving, thanks to the centralisation of its electrical controls. PELLENC is also presenting its new pruner, the Selion C21HD, which will replace the C20 model, incorporates improvements to further enhance its performance and durability. Another new product, the HELION 2 Compact will replace HELION Universal, offering superior capabilities that make it possible for both pruning as well as finishing work with the same tool. Finally, the new CITY CUT with counter-rotating blades, completes the range of cutting heads for the EXCELION 2000. It was developed for carrying out weeding in urban areas and meets the requirements of the "Zero Phyto" charter.

PELLENC is aware of the changing demands of professionals. As such, it is also continuing to expand its service offering with its "Full Service" contracts. These new offerings make it possible to provide a "tailor-made" solution to every customer giving them better control over their budget and peace of mind. You can see that the vocation of the PELLENC Group, with its 1,150 employees and more than 800 distributors around the world, is to commit ourselves in our daily effort to contribute with you to your performance and the success of your business.

Thank you for your continued confidence. We now invite you to discover the range of tools that we have developed for you.

Roger Pellenc Managing Director

4

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 4

26/02/2015 16:32:17

technology and design

company AND SERVICES

2014

Large Enterprise Award

BATTERIES AND CHARGERS

awards and trophies

Ministry of the Environment: Environment & Business Awards 2014

RASION

SMCL : Innovation Award

SELION C21 HD

EIMA - FEDER UNACOMA: Commendation for technological innovations

EXCELION 2000

AGROVINA : 3nd prize for innovation

2013

EXCELION 2000

PAYSALIA : 1st Prize for Innovation

MOWER

DEMOPARK : Silver medal

SALON DES MAIRES: finalist

AGRILEVANTE : 1st Prize

2012

SALON VERT: Sustainable development Prize

AQUIFLOR: 3nd prize for innovation

2011 Portable electrical

tools range

EXPOLIVA: Jury commendation

DEMOPARK : GOLD medal

POLY 5

Hedge Trimmers

AIRION

GOLDEN DECIBEL

SALON DES MAIRES: Innovation Prize

EDGE: European Innovation Prize

DEMODAGEN: Innovation Prize

2010 SELION M12

SIVAL: Commendation

AGRILEVANTE: Technical Innovation Prize

SELION M12

VINITECH : Bronze medal

AIRION

SALON VERT: Environment and sustainable development award

EDGE: European award for environment and sustainable development

2009 SELION C15

SALON DES MAIRES : Innovation Prize

HELION

PAYSALIA: 1nd prize for innovation

2008

FOREXPO: Commendation for safety in the workplace

sELION Perche

helion

SALON VERT: Materials and equipment prize

2004 LIXION

VINITECH: BRONZE Medal

Brush cutters

AIRION

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 5

cultivator

EDGE: Sustainable development Prize

PRUNERS

blower

5

pruning shears

ZERO EMISSION DESIGN

lighting

Eco-products for Sustainable Development

26/02/2015 16:32:17

An International Distribution Network

SWITZERLAND

LEBANON

6

PELLENC S.A.

PELLENC Deutschland

PELLENC Maroc

pellenc.sa@pellenc.com

pellencdeutschland@pellenc.com

pellenc.maroc@pellenc.com

PELLENC Languedoc-Roussillon

PELLENC America

Volentieri PELLENC

info@pellenc-lr.com

pellencamerica@pellencus.com

info@volentieripellenc.com

PELLENC Bordeaux-Charentes

PELLENC Italia

PELLENC Sud America S.A.

info@pellenc-bc.com

info@pellencitalia.com

info@pellenc.cl

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 6

26/02/2015 16:32:18

company AND SERVICES technology and design

800 authorised dealers spread across all continents.

BATTERIES AND CHARGERS

PELLENC is an international French group with over

lighting

Wherever you are, there is always a PELLENC contact to

blower

MOWER

answer your needs.

Subsidiaries/Production Sites South Africa, Germany, Australia, Chile, China, Spain, USA, France, Italy, Morocco, and Slovakia.

Hedge Trimmers

Authorised dealer countries

pellenc@pellenc.es

PELLENC Australia admin@pellenc.com.au

PELLENC South Africa pellencsouthafrica@pellenc.com

PELLENC Slovensko Filpel Bobinas PELLENC China PERA PELLENC PELLENC HD

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 7

7

pruning shears

PELLENC Iberica

PRUNERS

cultivator

Brush cutters

South Africa, Austria, Belgium, Canada, Croatia, Cyprus, Denmark, Finland, Greece, Hungary, Mauritius, India, Ireland, Israel, Lebanon, Luxembourg, Norway, New Caledonia, New Zealand, Portugal, Czech Republic, Reunion Island, Romania, United Kingdom, Slovenia, Sweden, Switzerland, Tunisia, and Turkey.

26/02/2015 16:32:19

industrial organization

a modern professional tool PELLENC designs and manufactures its tools to the highest quality requirements, combining industrial performance and environmental responsibility. The Group invests approximately €3 million per year on its eight production sites, totalling more than 1,500 employees in France, Europe and China, with the aim to develop and maintain a modern industrial tool and optimise logistics. This policy allows PELLENC to naturally adhere to the requirements of sustainable development by integrating green building standards, reducing waste, and limiting the environmental impact of its activity.

The group’s head office at Pertuis, in the Vaucluse department - France

The group’s head office at Pertuis, in Vaucluse - France 8

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 8

26/02/2015 16:32:24

company AND SERVICES technology and design

By placing your trust in PELLENC, you are guaranteed the professionalism of an undisputed leader in professional handheld tools and a benchmark in the fields of viticulture, fruit growing and green spaces. Today, PELLENC lends its experience and expertise to customers specializing in park and garden maintenance, local authorities, forests, golf courses... When you buy a

BATTERIES AND CHARGERS

Integrated DESIGN & production

PELLENC product, that has been designed and produced in a cohesive manner, you also benefit

MOWER

lighting

from advanced technology and unrivalled quality.

design

Brush cutters

Hedge Trimmers

blower

PELLENC has developed an integrated Technocentre located at the company's headquarters in Pertuis, in the Vaucluse, consisting of engineering offices, an electronic laboratory, and prototype workshop that employs hundreds of engineers. This Research & Development structure develops the new technologies required to design the tools of tomorrow and works to continuously improve products, making PELLENC the world’s 1st manufacturer to offer a professional and urban electrical range entirely dedicated to green space maintenance, viticulture and fruit growing. Numerous exclusive patents have evolved from this technocentre (more than 466 for Green & City Technology at group level), a fact of which PELLENC is extremely proud, for example: the axial turbine of the AIRION blower, the electronic chain brake of the SELION C20 HD chainsaw, the multipurpose cutting head of the EXCELION brush cutter, and the blade anti-blocking system of the HELION 2 hedge trimmers.

cultivator

Production

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 9

9

pruning shears

PRUNERS

PELLENC produces tens of thousands of tools in its own factories every year. Each tool is systematically controlled in the framework of "total quality" insurance that involves all of the operators on the assembly lines.

Before leaving the factory, each product is tested in order to verify the parameters of its operation. In addition, our products are subjected to intensive testing with a rigorously selected group of customers who take part in improving the quality and performance of our tools.

26/02/2015 16:32:26

THE COMPANY AND ITS SERVICES

A local service With 40 years of experience, PELLENC now has a network of over 800 qualified professionals, available and ready to help you anywhere in the world. In this way, each PELLENC customer is guaranteed access to both a commercial department which is quick to offer advice on the tool best suited for the job and financing or leasing solutions corresponding to their situation. The PELLENC network is also there to ensure a local after-sales service for maintenance of PELLENC tools in order to maintain their performance.

After-Sales Department

Certified genuine parts

PELLENC's after-sales department supports the PELLENC authorised dealer network by providing training in technological developments and new products throughout the year. The PELLENC after-sales team is selected according to very strict criteria. They have proven expertise and have a thorough understanding of our customers' work. PELLENC's after-sales service operates in all countries where the brand is present and provides technical support and multidisciplinary expertise in a network near you.

In order to extend the service life of your equipment and to safeguard the warranty for your tool, PELLENC recommends that you only use certificate genuine PELLENC parts. Your authorized PELLENC dealer will be able to inform you about the wear parts replacement programme for your tools.

WARRANTY

TRAINING PELLENC S.A. is an approved provider of technical training to its dealers. Product training is provided by the company.

The technicians at dealers that make up our network, come to our premises for training technologies our tools and receive the authorisation to carry out repairs.

10

PELLENC grants its end customers a free one-year warranty on parts and labour. This warranty is valid for three years for electric pruning shear motors and batteries (wear parts not included, see warranty terms available at your dealer).

Moreover, original PELLENC spare parts are guaranteed for a year (excluding labour). Thanks to our distribution network, PELLENC avoids tool downtime at the time of a warranty claim. Dealers have been trained for this purpose and have a stock of spare parts in order to respond quickly to customer needs and any possible repairs.

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 10

26/02/2015 16:32:27

company AND SERVICES technology and design

the full service pack

RENTAL

MAINTENANCE PACKAGE

EXTENDED WARRANTY

The network of authorised distributors of PELLENC products is authorised to repair the range of tools for use in green spaces. Technicians in this network have been trained by the PELLENC training organisation. The annual maintenance operations performed according to the recommendations PELLENC guarantee the tool's durability over time and an optimisation of productivity.

The work carried out range for example from the complete assembly to the verification of safety devices and engines through to the inspection of the cutting heads and the lubrication of parts. All information concerning annual maintenance operations are available from your PELLENC dealer.

As of the end of the usual one-year warranty, a range of extended warranties is available to extend the warranty for another year or two for products from the green spaces range of tools. This warranty extension can also cover batteries. Choose peace of mind.

* These services are available to users of PELLENC power tool in countries whose distribution network participates in the ÂŤFull ServiceÂť programme offered by PELLENC.

If you want to be up to date on all the latesttechnological developments of PELLENC tools, enjoy the use of your tools and related services or temporarily have access to equipment for a specific request, then opt for the long or short-term rental offer. With fewer administrative formalities, no banking formalities with your bank, the possibility to deduct VAT at the source and an improved year-end assessment, the rental offer is an ideal solution for green space professionals.

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 11

11

Brush cutters

Through this commitment, PELLENC guarantees that the dealer has received technical training on the tools and is authorised to market and maintain the tools. By signing this charter, the PELLENC tool dealer undertakes, in case of breakdown, to provide a quote or make a repair within 48 hours or lend a courtesy tool if your tool will be unavailable for more than 48 hours. TAll parts used are certified original PELLENC parts.

cultivator

Landscapers or local authorities, you can take advantage of custom financing solutions and master your season by financing the equipment of your choice and related services. Credit or lease financing offers are reserved for professional clients who wish to spread out their payments and quickly own the tools thanks to a formula that is simple and free of charge. The Pellenc Financing Solutions request form is available online on the website or by flashing the attached code.

PRUNERS

PRO COMMITMENT

pruning shears

FINANCING

Hedge Trimmers

blower

MOWER

lighting

BATTERIES AND CHARGERS

A comprehensive offering that simplifies your life.

26/02/2015 16:32:29

technology and design

ultra-high-performance electric motors

The Pellenc revolution Leading the way with the launch of the electric pruning shears in 1987, Pellenc has since developed numerous portable power tools. All of these tools use revolutionary PELLENC Brushless motors which bring power and flexibility to your tools while reducing their weight and size for precise, fatigue-free work.

The advantages

environment

efficiency

Our brushless motors emit no direct CO2 emissions and are 95% recyclable. They are very quiet and can be used in noise sensitive areas such as hospitals, nurseries, urban environments.

The PELLENC Brushless motors are both powerful and compact and can rotate up to 29,000 rpm and deliver outstanding efficiency of over 90%. These electronically commutated motors contain no carbon and require no maintenance.

lifespan The lifetime of the PELLENC brushless motors is theoretically infinite since there is no friction or wear, therefore, not spark. The motor completely stops each time the trigger is released.

12

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 12

26/02/2015 16:32:30

company AND SERVICES technology and design BATTERIES AND CHARGERS

ULTRA LITHIUM BATTERY

The lithium-ion INNOVATION

to introduce lithium-ion technology in portable power tools. PELLENC has developed its own technology for a power/weight/battery

lighting

Pellenc was the world’s first manufacturer

life compromise suitable for intensive

The advantages

secure system

life system

Battery preservation in case of overload, discharge or overheating thanks to an electronic control that allows the battery to be charged at any moment without affecting the memory and without altering the cells.

Ensures the individual protection of each element of the battery and allows automatic discharge for safe storage for several months.

Guarantees balancing the battery elements during recharging, in order to optimise consistent use and increase lifetime.

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 13

13

PRUNERS

Recognition device for each PELLENC tool, which allows the batteries to be used with any portable power tool from the range.

BALANCE SYSTEM

pruning shears

power system

cultivator

Brush cutters

Hedge Trimmers

blower

MOWER

professional work.

26/02/2015 16:32:37

technology and design

THE pellenc +

Professional

Environmentally friendly

cost-effective

Motor power

Extremely low carbon EMISSIONS

OPERATING COST

From 1200 to 2000 W (45 cm3).

Using PELLENC tools considerably reduces direct greenhouse gas emissions.

Daily operating costs are less than 20 cents!

That is equal to the average cost of charging a battery.

Performance Record-setting battery life, often longer than a full day's work

Ergonomics T ools are equipped with Soft Touch coating which produces less vibration and greater user comfort.

Safety Technological innovations have been developed to protect the user: the kickback sensor with electronic start-up, for example, which is fitted to our pruners.

Health in the workplace Using PELLENC equipment enables users to work without strain and thus reduces potential musculoskeletal problems (msp), co2 emissions and noise pollution.

Distribution network The network consists of specialist dealers, approved by pellenc, who are trained at our factories and are available to provide the advice you need and service your tools.

BATTERY RECYCLING PELLENC actively participate in the protection of the environment, from design to recycling. The last stage of the life cycle of a battery is the company's concerns. That's why PELLENC collects used batteries and works with SCRELEC, a specialised organisation for their recycling.

NOISE POLLUTION Because of their electric motors, PELLENC tools are very quiet when used. Our AIRION blower, for example, operates at an exceptionally low sound level of 80 dB!

GREEN DESIGN PELLENC tools contain no heavy metals or any toxic or hazardous substance that could harm the environment. Products coming off the PELLENC production lines are certified to the standards of the European Directive.

Motor More than 95% recyclable.

RETURN ON INVESTMENT Based on a daily petrol cost of €7.50, the battery pays for itself after 130 days of use*!

M ULTIFUNCTION PELLENC batteries are multifunction and can be used to power any tool from the range**.

LOW MAINTENANCE Maintenance-linked costs are limited due to the electrical technology.

The carbon-free Brushless motors have no wear parts and PELLENC ULiB batteries require no maintenance.

BATTERY LIFE PELLENC ultra high-capacity batteries often have a battery life that exceeds one working day.

The battery pays for itself

in the 1st year Return on investment of

5 000 €*

* Calculation based on consumption of 5 litres of fuel-oil mixture at a price of € 1.50 per litre. Data calculated with use of the 700 battery. ** See exception in the table on p.23

14

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 14

26/02/2015 16:32:37

company AND SERVICES technology and design

Zero emission design

BATTERIES AND CHARGERS

An autonomous energy concept and zero emission products

lighting

Ministry of the Environment

Since 2004, PELLENC has been heavily investing in research and development activities related to "green" technologies, to meet the requirements of sustainable development.

The PELLENC Zero Emission concept, which is the culmination of years of research, is based on the production, storage and use of renewable energy for professional use. On this basis, PELLENC offers custom packs to best meet the your energy needs.

blower

MOWER

Enterprise & Environment Award 2014

This technology was recognised in 2014 by the Ministry of Environment and ADEME (the French

By using PELLENC tools: - You create no direct emissions - You contribute to the respect of the environment.

Basic Package: a PELLENC ultra high-capacity ULiB battery, a SOLERION multifunctional solar panel, a LUMENION intelligent lighting mast, and a POWER CONVERTOR 1000 energy converter. www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 15

15

pruning shears

PRUNERS

cultivator

Using the products that make up the ecological package allows users to be independent in the production, storage and use of electrical energy. For local authorities, landscapers, farmers, campgrounds and golf courses, among others, the ecological package is individually created to best meet your energy needs.

Brush cutters

Hedge Trimmers

Environment & Business Awards 2014 - in the Category "Eco-products for Sustainable Development").

26/02/2015 16:32:42

101

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 16

26/02/2015 16:32:45

company AND SERVICES lighting

BATTERIES AND CHARGERS

technology and design

ultra lithium battery (ULiB) 10 years of technological expertise

DEMOPARK MOWER

2011

Gold medal

Brush cutters

Hedge Trimmers

blower

poly 5

Damien Bouvet

Centre des Monuments Nationaux Ministry of Culture and Communication, France

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 17

17

pruning shears

PRUNERS

cultivator

We have been using Pellenc material for its efficiency and low noise for the past two years. At the national domain of Saint-Cloud, classified as historical monuments, these machines allow us to carry out maintenance work while respecting the public who comes here seeking a place of tranquillity.

The blower is used to keep the entrances clean. The pole pruners are used to even out the crowns of the rows of chestnut trees. They are light and effective with their cutting angles.

26/02/2015 16:32:46

Battery and Charger

ultra lithium battery a battery with advantages The PELLENC ULiB range of batteries allows professional use of our tools.

ULiB batteries allow the user to work up to a full day without recharging. PELLENC is the inventor of professional battery operated tools.

18

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 18

26/02/2015 16:32:49

company AND SERVICES technology and design

PELLENC + points

“You will save money by replacing your old combustion engine tools with PELLENC tools!

BATTERIES AND CHARGERS

Once a battery is paid for, you can yield the profits of your investment for the remaining

lighting

duration of its life.”

Cost efficiency

Professional

Work it out for yourself

• Light batteries: from 2 kg to 5.9 kg.

Example of return on investment

• Battery life of up to a full day's work.

• Multifunction battery: the same battery can

MOWER

after 800 cycles using the ULiB 700.

be used to operate any tool from the Pellenc DAILY CONSUMPTION OF YOUR Combustion engine EQUIPMENT Using a 2-stroke mix*

Using ready to use fuel

5l

5l

Cost 1 l.

€ 1.50

€4

Daily cost

€ 7.50

€ 20

Ergonomic • Carrying harness which effectively and evenly distributes the weight of the battery.

• Breathable mesh fabric.

l./day

blower

portable power tool range.

• Instant start-up in cold or hot weather.

• No fuel preparation required.

Hedge Trimmers

• Velcro attachment for passing the cable through. * The regulation requires the substitution

IF YOU BUY A PELLENC 700 ULiB BATTERY

€ 0.10

€ 0.10

• No exhaust fumes.

savings per day

€ 7.40

€ 19.90

• 80 % of the battery is recyclable.

Paid off in

130 days

50 days

Return on investment

€ 5,000

€ 15,000

Cost-effective • From 800 to 1500 cycles (one cycle corresponds to one full charge and one full discharge).

• Daily cost of €0.10.

• Over its lifetime, the 1100 battery is equivalent • Battery pays for itself in the first year.* • Return on investment of €5,000.** * Cost of charging according to kW pricing in France. ** Consumption of 5 litres of mixture per day at a price of 1.50 euros per litre. Data calculated for daily use of the ULiB 700 battery.

27 Kg* of CO2

5.2 tons* of CO2

* Direct emissions of CO2/day with a Pellenc hedge trimmer ** Direct emissions of CO2/day with a combustion engine hedge trimmer

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 19

PRUNERS

vs

to using 4,700l of petrol and 60l of fuel-oil mix.

19

pruning shears

• No direct CO2 emissions.

cultivator

Daily cost

Brush cutters

ECO-FRIENDLY

26/02/2015 16:32:57

batteries

Upper fastening that appropriately distributes the battery weight

Ergonomic harness for optimum comfort

Lithium-ion battery

Dual support system allows for ventilation of the operator's back

Adjustable belt

Operating time display

Electronic board for control of charging and discharging

Battery storage box (700, 1100, Poly 5), harness and charger, protects your equipment from bumps and rain.

100% ABS plastic casing fitted with protective foam, transportable and stackable.

Dimensions: H 420 mm, W 396 mm, L 296 mm.

Empty weight: 2.7 kg - Ref. 118544

20

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 20

26/02/2015 16:32:59

company AND SERVICES technology and design BATTERIES AND CHARGERS

the batteries ultra-high capacity PELLENC ultra-high capacity batteries have the best weight/energy ratio!

lighting

The Ultra Lithium Battery 1100 develops 1,000 Wh for only 4.1 kg of lithium-ion elements.

PELLENC is the only manufacturer in the world to use the revolutionary lithium-ion ternary technology (Nickel-Cobalt-Aluminium).

blower

5.1 kg

4.1 kg

Nickel Cadmium

Nickel Metal Hydride

Life Phosphate

Li-ion manganese

PELLENC Li-ion Polymer

PELLENC Li-ion

Record battery life ULiB batteries allow you to work from a half to a full day. The power delivered is always constant regardless of the level of energy.

All PELLENC batteries have a display showing the remaining battery life percentage.

Hedge Trimmers

9.7 kg

Brush cutters

10 kg

cultivator

14.3 kg

PELLENC electronicallycontrolled lithium-ion battery Control of the lithium-ion battery cells is fully ensured by an electronic board.

The battery temperature is controlled during charging. If it is too low or too high, the battery is automatically switches to safety mode.

PELLENC patent

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 21

21

PRUNERS

20 kg

pruning shears

Weight to battery life ratio

MOWER

To generate the same amount of energy, a nickel cadmium (Ni Cd) battery would weigh 20 kg, a nickel metal hydride (NiMH) battery would weigh 14.3 kg, a lithium iron phosphate battery (technology used for electric vehicles) would weigh 10 kg and a lithium-ion manganese battery (technology used for portable power tools used by the public) would weigh 9.7 kg!

26/02/2015 16:33:00

batteries

ULiB

200

400

700

1100

POLY5

1.9

3.4

5.5

5.9

3.4

Li-ion

Li-ion

Li-ion

Li-ion

Li-Po

43.2

43.2

43.2

43.2

44.4

Capacity - Ah

4.5

9

15.8

23.2

10.6

Stored energy - Wh

200

400

700

1,000

500

Maximum power - W

1,200

2000

2000

2000

2000

Average lifetime – Cycles*

800 to 1200

800 to 1200

800 to 1200

800 to 1200

1200 to 1500

Charge time - h

5

5

8

12

8

Carrying harness

•

•

•

•

•

1.2 A charger

•

•

-

-

-

2.2 A charger

-

-

•

•

•

Compatible with Quick Charger**

-

-

yes

yes

yes

yes

yes

yes

yes

yes

Weight (without harness) - kg Type Voltage - V

Compatible with SOLERION

* A cycle is a full battery charge and full discharge. **The Quick Charger is available as an option.

22

*Comes standard

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 22

26/02/2015 16:33:03

5.5

5.9

3.4

-

-

2h 30min

3h 30min

-

1 to 2 days

-

-

-

-

TREELION adaptable pruning shears for fruit growing

-

3 days

4 to 5 days

7 days

3.5 days

HELION 2 COMPACT hedge trimmers

-

1/2 day

Up to 1 day

Up to 2 days

1/2 day

HELION POLE AND TELESCOPIC POLE hedge trimmers

-

1/2 day

Up to 1 day

Up to 2 days

1/2 day

CULTIVION wheel hoe

-

2 to 4 hours

Up to 1 day

Up to 2 days

3 to 5 hours

SELION pole chainsaw

-

1 to 3 hours

Up to 1 day

Up to 2 days

2 to 5 hours

SELION C21 pruner

-

1 to 3 hours

3 to 5 hours

Up to 1.5 day

2 to 5 hours

SELION M12 chainsaw

-

1 to 3 hours

Up to 1 day

Up to 2 days

2 to 5 hours

EXCELION 2000** brush cutter

-

-

2 to 3 hours

3 to 4.5 hours

1 to 2 hours

EXCELION 1200 mower

-

1 hour

2 to 3.5 hours

3 to 5 hours

1 to 2 hours

AIRION blower

-

1 hour

2 to 3.5 hours

3 to 5 hours

1 to 2 hours

RASION mower

TREELION fixed pruning shears for fruit growing

*The battery life depends on the tool, its use and the nature of vegetation worked on. ** Autonomy is calculated using the Eco mode

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 23

technology and design

company AND SERVICES 3.4

MOWER

1.9

Weight (without harness or belt)

blower

POLY 5

Hedge Trimmers

1,100

Brush cutters

700

cultivator

400

PRUNERS

200

lighting

MULTI-PURPOSE BATTERIES

23

pruning shears

SPECIFIC BATTERY

BATTERIES AND CHARGERS

Recommendation for using the batteries and tools according to power and battery life.

26/02/2015 16:33:11

chargers

solerion The solar recharging system Once the photovoltaic (PV) panels have been installed at the operating site, the Solerion makes use of the solar energy converted by the PV panels, thanks to the MPPT* load regulator, for optimum recharge of the connected battery.

Monocrystalline silicon photovoltaic panel

Electronic protection

Positioning aid optimum sunshine

Integrated MPPT* function

Voltage regulation and Intelligent voltage with automatic detection of the battery model connected

Automatic cut-off of the battery charger if the power generated by the solar panels is insufficient

Solerion Max. power (at 1000 W/m²) - W

280

Charging voltage - V

50.2

Max. charging current at 1000 W/m² (Excellent sunlight levels) - A

5.2

Max. charging current at 600 W/m² (Average insolation) - A

2.9

Stop charge current - mA

200

System dimensions (L x I x H) mm Weight - kg

1950 x 995 x 500 32

* MPPT (Maximum Power Point Tracking): This function allows the optimum power drawn to be permanently tracked so that the photovoltaic panels can be subsequently supplied with the maximum peak power.

Solerion solar panel

24

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 24

26/02/2015 16:33:14

company AND SERVICES technology and design BATTERIES AND CHARGERS

FOLDABLE solerion

lighting

Positioning aid optimum sunshine

Integrated MPPT* function

MOWER

Monocrystalline silicon photovoltaic panel

Electronic protection

blower

Voltage regulation and Intelligent voltage with automatic detection of the battery model connected

Brush cutters

Hedge Trimmers

Automatic shut-off of battery charging in the absence of sufficient power supplied by solar panels

Max. power (at 1000 W/m²) - W

140

Charging voltage - V

50.2

Max. charging current at 1000 W/m² - A

2.6

Max. charging current at 600 W/m² - A

1.5

Stop charge current - mA

200

cultivator

Solerion FOLDABLE

Dimensions (L x l) - mm

Transport bag Double panel configuration

PRUNERS

Weight - kg

840 x 670 1680 x 670 16.5 kg YES 280 W

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 25

25

pruning shears

- folded - opened

26/02/2015 16:33:19

chargers

standard and rapid chargers

STANDARDS 1.2 A - 2.2 A

"QUICK CHARGER"

Once the battery is completely discharged, the tool stops automatically and the battery buzzer beeps intermittently.

The standard charger, supplied with the battery (1.2 A charger for 200, 400 and Poly 5 batteries and 2.2 A charger for 700 and 1100 batteries) can then recharge your battery over a variable period. The charge time depends on the battery level, the charging environment (dry and ventilated area, protected from dust and with a temperature of between 10째C and 25째C) and the age of your battery. The standard charger comes standard with the battery and harness. Before using the battery for the first time at the start of a new season, it must be fully charged (99% steady capacity).

The quick charger will help boost battery charging. For improved durability of the batteries, PELLENC strongly recommends performing a conventional charge (with the standard charger) after,every five quick charges. With the rapid charger, the charging time of the 700 and 1100 batteries is reduced by an average of 4 hours, keeping in mind that after 1.5 hours to 2 hours, the capacity has already reached 70%.

The Quick Charger is available as an option.

charger and battery charge time

CHARGERS*

200

400

700

1100

1.2 A standard charger

5h

9h

15h

22h

9h

15h

2.2 A standard charger

3h

5h

8 h.

12h

5h

8 h.

-

-

3h

4h

2h

3h

Solerion : with low insolation

3h

4h

6h 40min

11h

5h

6h 40min

Solerion :with normal insolation

3h

3h

3h 30min

5h

2h 40min

3h 30min

SOLERION (FOLDABLE): low insolation

6h

8 h.

12h

22h

10h

12h

SOLERION (FOLDABLE): high insolation

6h

6h

7h

10h

5h

7h

Quick Charger

POLY 5

OLIVION

* Charging time calculated in optimal conditions. Refer to the battery instructions for conditions.

AN EXCEPTIONAL SERVICE LIFE Intelligent charge system that optimises the service life. Batteries enter a discharge cycle after 4 days of non-use, for optimal storage for 10 months. You just need to remember to store the batteries fully charged. PELLENC lithium-ion batteries do not suffer from memory run-down

26

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 26

26/02/2015 16:33:19

company AND SERVICES technology and design

POWER CONVERTOR 1000

BATTERIES AND CHARGERS

lE converter that transforms the battery voltage to 230 VAC.

Brush cutters

Hedge Trimmers

blower

MOWER

lighting

Combined with a PELLENC battery, the POWER CONVERTOR 1000 is the solution for storing and using electrical energy. Thanks to this product, all electrical devices below 1000 W can operate autonomously: domestic appliances, drills, jackhammers, etc..

The output voltage is pure sine wave (as on any electrical distribution network) to enable asynchronous motor control.

SINE WAVE POWER CONVERTOR 1000 Rated power - W

1000

Rated power over 1 second - W

2000

55

Pure sine wave output voltage - Vac +/- 5 %

230

Output current to 1000 W maximum - A

4.5

Switchable output frequency - Hz Protection rating Weight - kg Battery compatibility

cultivator

Maximum input voltage - A

36 - 52

50/60 IP20

PRUNERS

Input voltage (PELLENC battery) - Vdc

2.7 ULiB 700, ULiB 1100, Poly 5

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 27

27

pruning shears

Caution: do not connect the Power Convertor 1000 to an electrical distribution network.

26/02/2015 16:33:21

lighting

lumenion

autonomous and mobile projector LUMENION is a mobile, self-powered LED battery operated floodlight that is easily transportable and quickly assembled. Electronic control (PELLENC Patent) for optimisation of lighting power according to battery life remaining. The brightness is very simply adjusted using the control box or the remote control, all while displaying remaining battery life information.

The autonomous LUMENION projector is perfectly suited as emergency lighting, work lighting and on work sites: •

night sites on roads,

• construction, renovation or maintenance work in underground or poorly-lit area, •

event lighting,

•

Interior works of all types in confined spaces,

•

electrical maintenance works.

Attachment bar with 3 floodlights

50 W Projector with 4500 lumens Total of 13,500 lumens with 3 floodlights

Floodlights adjustable along 2 axes

Painted steel tube

Possibility of mains operation (3 m lead)

Telescopic pole with 3 sections: from 1.80 m to 4.20 m

Control unit PELLENC patent

Hook support for attaching the PELLENC battery Operates on 220 V mains power or with PELLENC batteries

Footprint: 1.80 m x 2 m

Remote control allowing control of LUMENION from a distance

28

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 28

26/02/2015 16:33:42

company AND SERVICES technology and design BATTERIES AND CHARGERS lighting

PELLENC + points • Electronic brightness control box PELLENC patent

MOWER

• Display on the box: information on power delivered and available lighting time remaining.

• Secure remote control (100m range - open field) allows control of the 4 LUMENION individually or grouped.

Can be used with several Lumenion.

• On the Ultra Lithium Battery:

blower

- Ability to adjust the light output to automate battery life, - Ability to adjust lighting duration up twenty three hours and forty five minutes.

• AC power: - with the supplied cable, LUMENION operates on 220 V, still with the ability to regulate luminosity.

Brush cutters

Hedge Trimmers

Protection rating

IP64

Weight of equipped mast - kg

12.5

Single floodlight weight - kg

3.6

Single floodlight electrical power - W

50

Single floodlight luminosity - Lumens

4500

Footprint - m Dimensions folded - m Transport bag

1.80 x 4.20 2 x 1.80 0.3 x 0.3 x 1.90 YES

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 29

PRUNERS

Deployment height - m

13,500

29

pruning shears

Lighting power with 3 projectors - Lumens

cultivator

LUMENION

26/02/2015 16:33:42

20140126_catalogue GCT 2015_EN.indd 30

26/02/2015 16:33:44

company AND SERVICES technology and design lighting

BATTERIES AND CHARGERS

rasion Manoeuvrability and revolutionary ergonomics!

Ministry of the Environment 2014

MOWER

Environment & Business Award "Large Enterprise" Award In the Eco-product category for Sustainable Development

blower

salon des maires et des collectivitĂŠs locales 2014

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 31

31

pruning shears

PRUNERS

cultivator

Brush cutters

Hedge Trimmers

Innovation award

26/02/2015 16:33:47

rasion lawnmower

RASION PELLENC's FIRST PROFESSIONAL LAWNMOWER Weighing less than 20 kg, the RASION Basic lawnmower revolutionises working conditions for green space professional. Ultra-manoeuvrable, easily transportable and with unmatched power, RASION offers impeccable cut quality for all types of mowing work undertaken by landscapers and local authorities.

32

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 32

26/02/2015 16:33:51

company AND SERVICES technology and design BATTERIES AND CHARGERS

ECO-FRIENDLY • It produces less noise, so you can work close to business or residential areas at any time • No fuel management or consumption

lighting

• Zero C0² emissions • Made from recyclable materials • Low maintenance • Uses ULiB 1100 and 700 batteries

Cost-effective

MOWER

PELLENC + points

• New, high efficiency motor of 93% for reduced

Professional

energy consumption

• Power of 2000 W • 3600 m² of maintenance mowing with one

blower

• Dual blade technology for finer cutting and more compacting of the grass in the collection box • Can be transported in a small vehicle

ULIB 1100 battery • Electronic speed setting of the blades from

Hedge Trimmers

3000 to 5000 rpm • Cutting width: 60 cm • Synchronised dual blades • Even mowing with no wheel traces on the ground • 70 L capacity of the collection box, namely, Brush cutters

more than 10 kg of finely cut grass • Waterproofing level of IP55 (mower only)

Ergonomic

cultivator

• Less than 20 kg • Ultra-manoeuvrable thanks to its weight and its two front swivel wheels • Loading it into a vehicle can be done by one person • The vertical position, with folded handlebar

PRUNERS

facilitates transport and optimises space when stored • The Zero Turn function made possible with the two front swivel wheels allowing the mower to turn freely and effortlessly Maintenance mowing in a remarkable garden, Aix-en-Provence, France

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 33

33

pruning shears

• Safe

cleaning position

26/02/2015 16:33:57

rasion lawnmower

PRODUCT advantages On lever

Adjustable and foldable handlebars

Electronic management of the blade speed

Notched knob for locking the handlebar

Clamping lever

70 L grass collection box

Large, wide wheels Cast aluminium casing

34

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 34

26/02/2015 16:33:58

company AND SERVICES technology and design

Cutting blades

lighting

BATTERIES AND CHARGERS

The dual blades make it possible to cut the lawn more precisely and optimise the mowing time. They offer even and flawless mowing.

MOWER

Handlebar controls

Cutting height adjustment lever.

6 positions.

Hedge Trimmers

blower

Electronic speed setting of the blades from 3000 to 5000 rpm The speed can be adjusted during mowing.

Storage

Brush cutters

Storage position with a very small footprint.

The mower can be turned over safely to clean the housing.

Swivel wheels Zero Turn 360째 rotation

cultivator

Transport

The RASION BASIC mower as well as the propelled version, SMART, will be on display from our distributors in 2015. The range will be launched in 2016.

[

[

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 35

35

pruning shears

PRUNERS

Transport position with the handlebar folded.

26/02/2015 16:34:01

rasion lawnmower

technical characteristics

RASION BASIC Overall dimensions unfolded HxWxL (cm)

114x155x62

Overall Dimensions HxWxL folded (cm)

60x88x62

Cutting width

60

Weight (with box and tray) (kg)

28.5

Weight (with box and without battery) (kg)

22.5

Weight (without box and without battery) (kg)

20

Cutting height mm (min/max), 6 positions

25/75

Max. power

2000 W

Blade speed: 3 speeds

3000 to 5000

Ejection

Rear

Mulching kit

Option

Collection box (l)

70

Box type

Flexible

Type of casing

Cast aluminium

Mower sealing

IP55

Autonomy in surface area with average autonomy of 3 km/h (m²)

3600 (Maintenance mowing)

Handling (Zero Turn)

yes

PELLENC brushless motor

yes

Safety in the event of mechanical blade shock

yes

Rollover and cleaning safety mechanism (deactivation of the blades)

yes

Folding handlebar in the bulk of the mower

yes

Vertical position (storage or cleaning)

yes

Front wheel diameter (mm)

178 (7’)

Rear wheel diameter (mm)

305 (12’)

Comparative table of CO2 emissions PELLENC Professional power tools eliminate nearly 99% of direct emissions of greenhouse gases compared to a combustion engine, namely, 86 times less. And, if you recharge your PELLENC batteries with our Solerion solar charger, CO2 emissions are totally eliminated.

Carbon equivalent per day

combustion engine operated lawnmower Direct emissions + petrol production

rasion Direct emissions + electricity production

WITH SOLERION Direct emissions

32 kg CO2

306 g CO2

0 g CO2

Specifications: 1kWh EDF corresponds on average to a carbon equivalent of 90g CO2/kWh in France, covering production and the remainder of its life (ADEME-France) — 1 L of SP95 super fuel has a carbon equivalent of 2.5 kg CO2/L in direct emissions and 5.5 kg CO2/L in production + direct emissions — This is based on: a 6h working day and 200 annual working days.

36

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 36

26/02/2015 16:34:02

company AND SERVICES technology and design BATTERIES AND CHARGERS

ACCESSORIES & CONSUMABLES Collecting bin

Mulching kit For a perfect cut, without collection.

Ref.: 120271

MOWER

lighting

The 70 L collection box can hold more than 10 kg of finely cut grass.

Ref.: 120270

blower

Blades and fasteners Kit

Brush cutters

Hedge Trimmers

Set of high strength steel blades and anti-shock safety attachments.

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 37

37

pruning shears

PRUNERS

cultivator

Ref.: 120269

26/02/2015 16:34:05

101

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 38

26/02/2015 16:34:10

company AND SERVICES BATTERIES AND CHARGERS

technology and design

Airion clean quietly

AQUIFLOR 2012

lighting

3rd prize for innovation

décibel d’or 2011

demodagen MOWER

2011

Innovation award

edge 2011

blower

European Award for the Environment and Sustainable Development

salon des maires 2011

Innovation award

edge Hedge Trimmers

2010

European Award for the Environment and Sustainable Development

Salon vert 2010

Brush cutters

Award for the Environment and Sustainable Development

PRUNERS

cultivator

“The Airion was purchased for its low noise and environmental pollution levels after receiving daily complaints from the general public because of that.

The department of ‘Green Spaces’ for Lyon will continue to invest in Pellenc equipment because the carbon footprint is minimal and the ergonomic quality of the tools is undeniable. In addition, Airion allows gardeners to work with more precisely thanks to the different blowing speeds.“ Jacques Demont,

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 39

39

pruning shears

Head of the equipment purchasing department for green spaces in the city of Lyon ISO 14001 - 400 ha d’espaces verts

26/02/2015 16:34:12

Airion handheld blower

Airion THE REFERENCE WHEN IT COMES TO BLOWERS The Airion blower can be used near noise-sensitive areas such as hospitals, schools, camp sites, towns, etc.

It is also perfectly suitable as a cleaning tool for roads alongside sweepers at any time of the day.

It works effectively in urban settings as a replacement for the traditional sweeper, as well as it does in parks and gardens.

Cleaning up a square after the weekly market.

40

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 40

26/02/2015 16:34:15

company AND SERVICES technology and design BATTERIES AND CHARGERS lighting MOWER blower

PELLENC + points Professional • Ultra-light: only 2.6 kg

Cleaning of the Champs-Elysées - Paris

Hedge Trimmers

• High performance • Air speed: 61 m/s • Airflow: 730 m³/h • Autonomy from 1/2 day to a whole

Brush cutters

day of work

Ergonomic • Exceptional handgrip • No gyroscopic effect

cultivator

ECO-FRIENDLY • Only 80 dB • Zero emissions and zero waste

PRUNERS

Cost-effective • At least €6 in petrol saved per day • Little maintenance • No use of blended fuel Cleaning of a school yard

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 41

41

pruning shears

• Multi-purpose battery

26/02/2015 16:34:21

Airion handheld blower

PRODUCT advantages

Speed and boost selector

LED indicators Progressive trigger

Hook for attaching the carrying strap

Soft Touch Handgrip

Axial turbine Intake grill Inlet elbow

42

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 42

26/02/2015 16:34:26

company AND SERVICES technology and design BATTERIES AND CHARGERS

see the video!

Speed selector

lighting

Scan this code with your smartphone

The AIRION is fitted with a 4-level speed selector that optimises and adjusts the speed of the air propelled according to the working environment (roads, markets, gardens, etc.) and the site to be cleaned (wet or dry leaves, gravel, etc.). Each of the 4 speeds is visually displayed by a led indicator.

MOWER

Metal protection Profiled nozzle

Boost

Specially designed to reduce the sound level whilst maintaining exceptional blowing performance. Air intake is optimised to improve air flow.

It enables the airflow to be controlled accurately. On roads, this trigger makes it possible to prevent scattering of small stones.

Axial turbine

Reinforced intake grill

PELLENC was inspired by advanced aeronautics to design a resistant, silent and efficient turbine. In addition, this axial turbine eliminates gyroscopic effects which can cause MSP (musculoskeletal problems).

It was designed to improve the efficiency of the blower. It is removable and interchangeable for easy maintenance.

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 43

cultivator

Progressive trigger

PRUNERS

PELLENC patent

Inlet elbow

43

pruning shears

PELLENC patent

Brush cutters

Hedge Trimmers

blower

By holding down the speed selector button, the boost mode is immediately activated to deliver a maximum power of 750 W. This feature is very useful for removing wet vegetation or heavy litter. This mode is available for all speeds.

26/02/2015 16:34:27

Airion handheld blower

technical characteristics

AIRION Max. power - W

750

Combustion engine equivalence – cm³

20

Weight - kg

2.6

Air flow rate - m³/h

730

Max. airflow (without nozzle) - m³/h

880

Air speed - m/s

61

Guaranteed noise level (LPA)* - dB(A)

80 (78 actual)

Guaranteed sound level (LWA)* - dB(A)

92 (89 actual)

Guaranteed level at 15 metres (ANSI) - dB(A)

<65 (59 actual)

Guaranteed vibration level (ah)** - m/s²

<2.5 (0.7 actual)

4-speed selector switch

•

Round nozzle

•

Battery life*** with ULiB 1100,

• Standard

Up to 5 hours

*Values determined according to acoustic measurement standards NF EN ISO 11201 and NF EN ISO 3744 American standard. ** Vibration emission value following DIN EN 60745-1:2009 - Kd uncertainty = 1.5 m/s² *** For information: the times were observed in actual working time, without taking breaks into consideration.

Battery life is influenced by the nature of the work.

Comparative table of CO2 emissions PELLENC Professional power tools eliminate nearly 99% of direct emissions of greenhouse gases compared to a combustion engine, namely, 86 times less. And, if you recharge your PELLENC batteries with our Solerion solar charger, CO2 emissions are totally eliminated.

Carbon equivalent per day

Combustion engine operated BLOWER Direct emissions + petrol production

AIRION Direct emissions + electricity production

WITH SOLERION Direct emissions

20 kg CO2

234 g CO2

0 g CO2

Specifications: 1kWh EDF corresponds on average to a carbon equivalent of 90g CO2/kWh in France, covering production and the remainder of its life (ADEME-France) — 1 L of SP95 super fuel has a carbon equivalent of 2.5 kg CO2/L in direct emissions and 5.5 kg CO2/L in production + direct emissions — This is based on: a 6h working day and 200 annual working days.

44

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 44

26/02/2015 16:34:28

company AND SERVICES technology and design BATTERIES AND CHARGERS

ACCESSORIES & CONSUMABLES

Nozzle with integrated scraper

Round blowing nozzle

For lifting and removing all sticky or wet waste

 Interior diameter of the nozzle: Ø 65 mm

Sold as standard

 Interior diameter of the nozzle: Ø 65 mm

Length of the nozzle: 57 cm 

Ref.: 83326

 Length of the nozzle: 57 cm

Ref.: 102930

Cable carrying hook Accessory for keeping the power supply cable wound up.

Ref.: 83334

Ref.: 101056

Carrying strap cultivator

Harness which allows you to have your hands free without putting the blower down.

PRUNERS

A hook which clips to the battery belt so that the operator can have free hands.

Kit incorporating the strap and hook for attaching the blower Sold as standard

Ref.: 86708

Sold as standard

Ref.: 110001

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 45

45

pruning shears

Tool carrying hook

Sold as standard

Brush cutters

Hedge Trimmers

The only wear part of the blower.

blower

Reinforced inlet grill

MOWER

lighting

Designed to achieve the best possible efficiency between air flow and air speed.

26/02/2015 16:34:33

101

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 46

26/02/2015 16:34:35

company AND SERVICES lighting

BATTERIES AND CHARGERS

technology and design

HELION robust and light

paysalia 2009

1st prize for innovation

Salon vert MOWER

2008

cultivator

Brush cutters

Hedge Trimmers

blower

Price of the material and equipment

Leonardo Albergati Landscaper, Orvieto - Italy

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 47

47

pruning shears

PRUNERS

We have a hedge Helion Telescopic hedge trimmer, a Selion pruner, a Treelion shears and the 600 and 700 batteries. These tools provide highly accurate and quality work and saves us a considerable amount of time

26/02/2015 16:34:35

HELION HEDGE TRIMMER

HELION range POWER AND PRECISION HELION hedge trimmers are efficient tools which meet the needs of professionals in terms of power and trimming quality. Their odourless operation and light weight allow the user to work comfortably when trimming hedges, ornamental trees and also for pruning with the new HELION 2 COMPACT.

Pruning work on a pyracantha hedge

48

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 48

26/02/2015 16:34:40

company AND SERVICES technology and design BATTERIES AND CHARGERS

PELLENC + points

lighting

Professional • Cutting power designed for pruning and finishing

MOWER

• Anti-locking blades system • Fast Connector System: for rapid tool connection and disconnection •B est compromise between vibrations/cutting capacity • Enough battery life for a full day’s work blower

• Sealing level of IP 54

Adaptable deflector for the 63 cm cutter bar

• Soft Touch rotating handgrip • Its light weight improves working conditions • Quick Switch system with four types of

Hedge Trimmers

Ergonomic

interchangeable cutter bars on the same engine Brush cutters

• Retractable trigger

ECO-FRIENDLY • Quiet working environment

cultivator

• Odour-free and pollution-free operation • Zero emissions and zero waste

Cost-effective

PRUNERS

• At least €8 in petrol saved per day • 1 motor with different blade sizes • Low maintenance • No use of blended fuel

Lightweight and ergonomic for pruning hedges and shrubs

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 49

49

pruning shears

• Multi-purpose battery

26/02/2015 16:34:49

HELION HEDGE TRIMMERS

PRODUCT advantages Safety trigger

Protective cover IP54 sealing

Front handle

LED indicators Speed selector

Fast Connector Quick Switch

Retractable trigger

Hanging ring

Ergonomic Soft Touch handle, with +/-90째 rotation 5 adjustable positions

Revolutionary PELLENC motor with electronic switching

HELION 2 COMPACT

HELION Pole

see the video!

HELION Telescopic

Helion is delivered without a cutterbar. Choose the cutter bar that best suits your needs.

50

Scan this code with your smartphone

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 50

26/02/2015 16:34:52

company AND SERVICES technology and design

Kickback stop

BATTERIES AND CHARGERS

Double rake cutterbar

Protector

High performance sharpening

blower

The protector on the HELION 2 COMPACT, easily disassembles for rapid sharpening of the blades

Blade

PELLENC patent

On pole models the head can be rotated +90°/-45° for working in all cutting positions.

Rotating handle

Speed selector

The handle can be rotated to +/- 90° for working vertically without bending the wrist.

The 4 speeds make it possible to adapt the speed to the type of vegetation. Good management of the selector also saves on battery use.

Anti-locking system

Quick Switch

A unique device reverses the motor’s direction of rotation if the blade gets caught in the vegetation. This enables it to be easily removed and prevents the blades from twisting or breaking.

All cutter bars are universal and easily interchangeable.

The mounting and removal of the cutter bar takes less than a minute.

Brush cutters

Stiffener in aluminium or blade in high carbon steel; Anti-kickback stop in stainless steel.

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 51

Hedge Trimmers

Flexible head

51

cultivator

On the HELION 2 COMPACT, the Fast Connector allows for rapid connection and disconnection of the tool to and from the battery when working, a key safety element that allows you to quickly get out of any risky or uncomfortable situation

NEW

PRUNERS

Fast Connector System

pruning shears

NEW

MOWER

lighting

Cutterbar mounting in aluminium.

(Except 27 cm cutter bar)

26/02/2015 16:34:55

HELION HEDGE TRIMMERS

technical characteristics HELION

COMPACT 2

Pole

Telescopic

1,200

1,200

1,200

Combustion engine equivalence – cm³

30

30

30

Weight (with 63 cm blade) – kg

3.5

3.7

4.3

Length of the pole - cm

-

180

150/200

Cutting Rate – cuts/min

3200 to 3800

3200 to 3800

3200 to 3800

Available cutting length - cm

27-51-63-75

Max. power - W

27 – 51 – 63- 63D – 75

adaptable deflector for the 63 cm cutter bar

Tooth pitch - mm

33

33

33

Tooth spacing – mm

40

40

40

Gullet depth – mm

24

24

24

5-notch rotating handle

+/-90°

-

-

-

+85°/-45°

+85°/-45°

Noise level (LPA)* - dB(A)

84

87

83

Guaranteed noise level (LWA)* - dB(A)

92

96

96

Front handle vibration level (ah)** - m/s²

2.6

5.5

3.9

Front handle vibration level (ah)** - m/s²

3

3.9

3.4

Quick Switch

•

•

•

Fast Connector

•

-

-

4-speed selector switch

•

•

•

Belt carrying kit

-

-

•

Harness carrying kit

-

-

•

• Multi-position pivoting cutting head

Battery life*** with ULiB 1100,

Up to 2 days

IP 54

•

-

-

• standard *Values determined in accordance with 2000/14/EC directive and EN ISO 11201 and EN ISO 3744 acoustic measurement standards - With H 75 and 3800 bps/mn ** Vibration emission value following EN 60745-2-15 - Kd uncertainty = 1.5m/s² - With H 75 and 3800 bps/mn *** For information: the times were observed in actual working time, without taking breaks into consideration. Battery life is influenced by the nature of the work required

Comparative table of CO2 emissions PELLENC Professional power tools eliminate nearly 99% of direct emissions of greenhouse gases compared to a combustion engine, namely, 86 times less. And, if you recharge your PELLENC batteries with our Solerion solar charger, CO2 emissions are totally eliminated.

Carbon equivalent per day

Combustion engine hedge trimmer Direct emissions + petrol production

HELION 2 Direct emissions + electricity production

WITH SOLERION Direct emissions

25 kg CO2

138 g CO2

0 g CO2

Specifications: 1kWh EDF corresponds on average to a carbon equivalent of 90g CO2/kWh in France, covering production and the remainder of its life (ADEME-France) — 1 L of SP95 super fuel has a carbon equivalent of 2.5 kg CO2/L in direct emissions and 5.5 kg CO2/L in production + direct emissions — This is based on: a 6h working day and 200 annual working days.

52

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 52

26/02/2015 16:34:55

company AND SERVICES technology and design

Pole, Telescopic and Universal cutter bars

• 27 cm - ref. 57096

27 cm - ref. 57029

• 51 cm - ref. 56205

51 cm - ref. 56202

• 63 cm

- ref. 56206

63 cm

• 75 cm

- ref. 56207

75 cm - ref. 56204

lighting

HELION 2 Compact cutter bars

- ref. 56203

63D - ref. 57009 (deflector integrated with the cutter bar)

Helion Pole harnesses carrying Kit

Helion Pole belt carrying Kit

MOWER

• Deflector - ref. 57097 (adaptable on the 63 cm cutter bar)

Improves comfort while working - attaches to the belt. blower

Improves working comfort – attaches to the battery harness.

BATTERIES AND CHARGERS

ACCESSORIES & CONSUMABLES

10.30 m extension cord For better balance of the hedge trimmer pole.

Ref.: 86669

Ref.: 100994

Biodegradable cleaner for resin

400 g cartridge for lubricating the cutter bar gear.

For cleaning and lubricating the cutting elements, contains 400 ml.

cultivator

Grease cartridge

10.30 m male/female lead allowing you to work with the battery on the ground. Only works with the Helion

For cutter bars with a carbon stiffener: ref.: 73974 Ref.: 115174

For cutter bars with an aluminium stiffener: ref.: 121633

Ref.: 68518

www.pellenc.com

53

pruning shears

PRUNERS

Grease gun.

20140126_catalogue GCT 2015_EN.indd 53

Hedge Trimmers

Counterweight

Ref.: 74668

Brush cutters

Ref.: 79297

26/02/2015 16:35:00

101

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 54

26/02/2015 16:35:02

company AND SERVICES lighting

BATTERIES AND CHARGERS

technology and design

EXCELION 2000 Robust, powerful and lightweight

AGROVINA 2014

3nd prize for innovation

MOWER

salon des maires et des collectivitĂŠs locales Finalist 2013

Paysalia 2013

blower

1st Prize

Demopark 2013

Silver medal

Hedge Trimmers

Aquiflor 2013

cultivator

Brush cutters

2nd Prize

PRUNERS

The Excelion 2000 brush cutter is extremly user friendly, quiet, lightweight, and robust. With its removable handle, which is practical for transport, making adjustments and finding the ideal work position is easy. In addition, for a professional user the different cutting heads offer exceptional work quality.

Lionel Reynaud

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 55

55

pruning shears

Landscaper at La Tour d'Aigues

26/02/2015 16:35:04

Excelion 2000 BRUSH CUTTER

EXCELION 2000 A BRUSH CUTTER that Is made â&#x20AC;&#x2039;â&#x20AC;&#x2039;to last Designed for routine maintenance or intensive mowing, the EXCELION 2000 Professional will meet the expectations of even the most demanding users. This robust, powerful and lightweight brush cutter perfectly eliminates tall, dense grasses, woody weeds, brambles and shrubs.

Powered by a PELLENC ULiB 1100 battery, it's quiet, non-polluting operation, and low vibration increases comfort for the user. Several cutting heads can be used on the EXCELION 2000, offering different options for getting the job done.

Finishing clearing at the Jardins d'Albertas, Aix-en-Provence - France

56

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 56

26/02/2015 16:35:09

company AND SERVICES technology and design BATTERIES AND CHARGERS lighting MOWER

PELLENC + points Professional • Power equivalent to a 45cc brush cutter

blower

• For mowing large areas and all types of landscaping work • Autonomy of a half day's work in Eco mode

Roll Cut head with twisted polyamide wire

Hedge Trimmers

Ergonomic • Handlebar grip with Soft Touch coating • Perfect balancing of the tool for improved

Brush cutters

working comfort •E rgonomic carrying harness that ensures greater freedom of movement

ECO-FRIENDLY

cultivator

• Work quietly • Zero emissions and zero pollution

PRUNERS

Cost-effective • At least €8 in petrol saved per day.

• No motor maintenance • No use of blended fuel Site clearing in a thicket

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 57

57

pruning shears

• Multi-purpose battery

26/02/2015 16:35:14

Excelion 2000 BRUSH CUTTER

PRODUCT advantages

LED indicators Progressivetrigger

Safety trigger

Revolutionary PELLENC brushless motor with electronic switching

Casing designed for cooling the engine

Carrying eyelet

Angle transmission

PELLENC twisted wire

This PELLENC designed angle transmission in magnesium is very light and durable, and enables perfect balancing of the machine. Specific work aimed at minimising the noise produced by the mechanism was carried out. In addition, the hardware is integrated preventing any possible loss of the fixing screws.

PELLENC twisted wire significantly improves the performance of the brush cutter, both in terms of energy consumption, as well as noise. It was specially designed to provide high resistance to abrasion, thus avoiding excessive wire.

Economy Mode

Cutting head

An Eco mode is available on the brush cutter. It offers the double advantage of prolonged use of the machine as well as working at low speed to limit projections, especially in urban areas.

5 interchangeable cutting heads have been designed to make them easier to use: Blade Cut, City Cut, Roll Cut, Multi Cut, and Tap Cut. The wire loading systems and the blade attachments have been patented for the Roll Cut, Cut Tap, and Multi Cut cutting heads.

PELLENC patent

58

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 58

26/02/2015 16:35:17

company AND SERVICES technology and design

NEW Double harness

No outer sheath on the handlebar.

Avoids catching and breakage

BATTERIES AND CHARGERS

Ergonomic and balanced with a carrying side plate equipped with protective padding and a quick release system. The manoeuvres for adjusting the position of the carrying plate have been improved and allow the operator to perfectly adjust the harness for maximum comfort.

lighting

Soft Touch coating

blower

MOWER

Handlebars adjuster knob for adapting it to the user's morphology. Can be folded for transport

Hedge Trimmers

Aluminium transmission tube

Brush cutters

Angle transmission

Safety casing

cultivator

Interchangeable cutting head

Excelion 2000 comes without cutting head, that allows you to choose the most suitable cutting head for your needs.

Scan this code with your smartphone

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 59

59

pruning shears

PRUNERS

see the video!

26/02/2015 16:35:19

Excelion 2000 BRUSH CUTTER

technical characteristics Excelion 2000

Combustion engine equivalence – cm³

45

Weight (excluding cutting tool and casing) - kg

5.4

Max. rotational speed - rpm - Standard mode

2,000 to 6,200

- Eco mode

2,000 to 4,200

Wire diameter - Ø

2.4 mm mini/3 mm maxi

ROLL CUT loading

Ø 2.4 -> 9 m / Ø 3 -> 6 m

TAP CUT loading

Ø 2.4 -> 5 m / Ø 3 -> 3.5 m

Noise level (LpA)* - dB(A))

84

Noise level (LWA)* - dB(A)

93

Right handle vibration level (ah)** - m/s²

1

Left handle vibration level (ah)** - m/s²

1.3

Interchangeable cutting heads

BLADE CUT / CITY CUT / ROLL CUT / MULTI CUT / TAP CUT

Battery life in Eco mode*** with Ulib 1100

Up to 5 hours

* Values determined according to acoustic measurement standards NF EN ISO 11201 and NF EN ISO 3744 ** Following vibration emission value DIN EN 60745-1: 2009 measured with the head Roll Cut. - Uncertainty Kd = 1.5 m/s² *** For information: the times were observed in actual working time, without taking breaks into consideration.

Battery life is influenced by the nature of the work required

Comparative table of CO2 emissions PELLENC Professional power tools eliminate nearly 99% of direct emissions of greenhouse gases compared to a combustion engine, namely, 86 times less. And, if you recharge your PELLENC batteries with our Solerion solar charger, CO2 emissions are totally eliminated.

Carbon equivalent per day

combustion engine powered brush-cutter Direct emissions + petrol production

EXCELION 2000 Direct emissions + electricity production

WITH SOLERION Direct emissions

21 kg CO2

438 g CO2

0 g CO2

Specifications: 1kWh EDF corresponds on average to a carbon equivalent of 90g CO2/kWh in France, covering production and the remainder of its life (ADEME-France) — 1 L of SP95 super fuel has a carbon equivalent of 2.5 kg CO2/L in direct emissions and 5.5 kg CO2/L in production + direct emissions — This is based on: a 6h working day and 200 annual working days.

60

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 60

26/02/2015 16:35:20

company AND SERVICES technology and design

ACCESSORIES & CONSUMABLES

Ref.: 57076

TAP CUT For mowing and clearing edges Semi-automatic wire head.

Twisted polyamide wire

head screw for Roll Cut

Tap Cut plastic reel

Ref.: 106803

107373

Shell 56 m - Ø 3 mm: Ref. 108911 Shell 70 m - Ø 2.4 mm: Ref. 79601 Reel 347 m/Ø 2.4 mm: Ref. 79599 Reel 280 m/Ø 3 mm: Ref. 117453

Multi Cut casing

Twisted polyamide wire

Ref. 81116

Tube of 50, 20 cm strands/Ø 2.4 mm - ref. 79602

ref.:

Ref.: 57078

MOWER

MULTI CUT Patent

MULTI CUT For all types of mowing. Wire and blade cutting head.

Two-prong blades For intensive clearing

8 tooth blade for clearing tall, dry grass.

of tall grass.

Ø 200 mm - Ref.: 85176

Ref.: 57075

Ø 255 mm - Ref. 79600

Reel 347 m/Ø 2.4 mm - Ref: 79599

blower

ROLL CUT For mowing large areas.

Manual wire trimmer head.

Patent

lighting

Patent

BATTERIES AND CHARGERS

ROLL AND CUT TAP CUT

Shell 70 m/Ø 2.4 mm - Ref: 79601

Two-prong blades For intensive clearing of tall grass.

Trident Blades For clearing thick, high grass.

Mulching cutter For mulching woody vegetation, dense or thorny brush vegetation.

Ref.: 57080

Ø 320 mm - Ref. 110279

Ø 320 mm - Ref. 114700

Ø 240 mm - Ref.: 110281

Clearing saw For gently trimming shrubs.

Protective shield Use is mandatory with the mulching blade.

Aluminium casing Mandatory for use with the

Ref. 106645

Ø 230 mm - Ref. 111700

clearing saw.

cultivator

BLADE CUT For mowing tall grass, brush or shrubs Blade head.

Brush cutters

Hedge Trimmers

BLADE CUT

Blade Cut bell casing

Ref. 111500

Ref. 111600

Grease tube for the bell-crank

Protective storage bag for the cutting heads

Ref. 35749

Ref. 111800

Double harness

Standard casing

Ref. 110283 - Supplied as standard

Ref. 107533 - Supplied as standard

Carry hook for the Excelion 2000 trimmer harness. Ref. 119569

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 61

61

pruning shears

PRUNERS

Other accessories

26/02/2015 16:35:37

EXCELION 2000 city cut BRUSHCUTTER

NEW city cut The CITY CUT cutting head provides weed control with no projections

FOR MORE INFORMATION!

Scan this code with your smartphone

PELLENC + points Professional • No dangerous projections when doing weeding working in urban settings • High productivity • Does not damage the urban infrastructure • Perfect finishing on curbs, around trees and along fences • Unique counter-rotation technology • High cutting capacity, equivalent to cutting with a 3 mm wire • Fewer consumables, easy blade maintenance Weeding of curbs with no projections

Ergonomic • Quick change head • Steel bell casing resists abrasions on asphalt

ECO-FRIENDLY • Meets the "Zero Phyto" charter for alternative weed removal in urban areas • Does not hurt the plants • No plastic wire waste The City Cut does not hurt plants

62

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 62

26/02/2015 16:35:45

company AND SERVICES technology and design BATTERIES AND CHARGERS

The alternative weeding solution that meets the zéro phyto charter

lighting

Interchangeable heads for the EXCELION 2000 range

blower

MOWER

adaptS to EXCELION 2000

Hedge Trimmers

The counter-rotational movement and the shape of the blades preserve the urban infrastructure, cars and plants.

Weight - kg

Brush cutters

CITY CUT 1.6

Maximum rotational speed of the blades. - rpm - Eco mode

400 rpm 800 rpm

- Standard mode

230 mm cultivator

Cutting diameter - Ø

Dual blade kit

Steel bell

Ref. 118270

Ref. 118271

Grease tube for the bell-crank

Protective storage bag for the cutting heads

Ref. 35749

Ref. 111800

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 63

63

pruning shears

PRUNERS

ACCESSORIES & CONSUMABLES

26/02/2015 16:35:49

101

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 64

26/02/2015 16:35:53

company AND SERVICES Hedge Trimmers

blower

MOWER

lighting

BATTERIES AND CHARGERS

technology and design

EXCELION 1200 combining, versatility and precision

cultivator

Brush cutters

I invested in a brush cutter, two chainsaws, pruning shears and a high capacity battery. With one battery for a series of tools, the practical aspect is obvious.

The significant advantage in relation to combustion engine operated equipment is the quiet operation.

That means total comfort both for the user and the people at the campsite. Another advantage is the perfect ergonomics. With the battery strapped on the back, the weight is perfectly distributed. Work can be done for hours on end without excessive fatigue."

Robert Birebent

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 65

65

pruning shears

PRUNERS

Domaine de la Serre Camp grounds - France

26/02/2015 16:35:54

EXCELION 1200 mower

Confort total 1200 A versatile grass cutter EXCELION 1200 is a grass strimmer that is used for finishing work in parks, gardens and urban spaces. Its ergonomics and ease of use make it possible to work comfortably on slopes and in places that are not easily accessible thanks to its multiple angle settings. Your specific needs will determine the choice of the cutting head from the range of interchangeable heads.

Clearing work in noise sensitive areas

66

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 66

26/02/2015 16:35:57

company AND SERVICES technology and design BATTERIES AND CHARGERS lighting MOWER

PELLENC + points Professional

blower

• Power equivalent to a 30 cc brush cutter • Designed for both brush cutting and finishing work • 3 interchangeable cutting heads for different uses

Interchangeable cutting head Hedge Trimmers

• Autonomy from 1/2 day to a whole day's work

Brush cutters

Ergonomic • Angled handle for a better grip • Adjusts to the user's physique: telescopic pole, swivel head, and adjustable handle

cultivator

ECO-FRIENDLY • Work quietly • Zero emissions and zero waste

PRUNERS

Cost-effective • At least €8 in petrol saved per day.

• Low maintenance • No use of blended fuel Finishing work - Jardins d'Albertas, Aix-en-Provence - France

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 67

67

pruning shears

• Multi-purpose battery

26/02/2015 16:36:04

EXCELION 1200 mower

PRODUCT advantages

4-speed selector switch LED indicators Safety trigger

Carrying harness attachment

Angled handle Soft Touch, ergonomic handle Main tube made from carbon fibre

Anti-vibration handle

Cutting heads

Speed selector

3 adaptable and interchangeable cutting heads for finishing or intensive mowing. Easy loading of wires, with several wire diameters acceptable on the same head for the Roll Cut and Tap Cut. Possibility of equipping the Multi Cut with wires or blades.

The four positions are used to adapt the cutting speed according to the vegetation. A low speed prevents the projection of gravel or pebbles in urban areas. Good management of the selector saves on battery use.

PELLENC patent

68

Anti-vibration system

Progressive trigger

The Soft Touch coated handle reduces vibrations for more comfortable and less strenuous work.

The trigger allows you to precisely control the power output.

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 68

26/02/2015 16:36:06

company AND SERVICES technology and design

see the video!

BATTERIES AND CHARGERS

Excelion 1200 is delivered without a cutting head.

You can choose the cutting head that is most suitable to your needs.

MOWER

lighting

Scan this code with your smartphone

blower

New adapter sleeve

Aluminium telescopic base tube

Hedge Trimmers

Revolutionary Pellenc motor with electronic switches

cultivator

Brush cutters

Swivel cutting system

Protective casing

PRUNERS

Interchangeable cutting head

PELLENC twisted wire significantly improves the performance of the brush cutter, both in terms of energy consumption, as well as noise. It was specially designed to provide high resistance to abrasion, thus avoiding excessive wire.

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 69

69

pruning shears

PELLENC twisted wire

26/02/2015 16:36:07

EXCELION 1200 mower

technical characteristics

Excelion 1200 Maximum power - W

1,200

Combustion engine equivalence – cm³

30

Weight (excluding cutting tool and casing) - kg

3.8

Max. rotational speed - rpm

2000 to 6,200

ROLL CUT wire loading - Ø

Ø 2.4 -> 9 m / Ø 3 -> 6 m

TAP CUT wire loading - Ø

Ø 2.4 -> 5 m / Ø 3 -> 3.5 m

MULTI CUT wire loading* - Ø

strands of 20 cm in Ø 2.4 mm and Ø 3 mm

Noise level (LpA)* - dB(A))

83

Noise level (LWA)* - dB(A)

91

Right handle vibration level (ah)** - m/s²

< 2.5

4-speed selector switch

•

Progressive trigger

•

Interchangeable cutting heads

ROLL CUT - TAP CUT - MULTI CUT

Battery life*** with ULiB 1100

Up to 5 hours

• standard

*Values determined according to the 2000/14/EC directive and acoustic measurement standards EN ISO 11201 and EN ISO 3744 ** Vibration emission value following EN 60745-1 - Kd uncertainty = 1.5m/s² and EN ISO 22867 *** For information: the times were observed in actual working time, without taking breaks into consideration.

Battery life is influenced by the nature of the work required

Comparative table of CO2 emissions PELLENC Professional power tools eliminate nearly 99% of direct emissions of greenhouse gases compared to a combustion engine, namely, 86 times less. And, if you recharge your PELLENC batteries with our Solerion solar charger, CO2 emissions are totally eliminated.

Carbon equivalent per day

combustion engine powered brush-cutter Direct emissions + petrol production

EXCELION 1200 Direct emissions + electricity production

WITH SOLERION Direct emissions

21 kg CO2

336 g CO2

0 g CO2

Specifications: 1kWh EDF corresponds on average to a carbon equivalent of 90g CO2/kWh in France, covering production and the remainder of its life (ADEME-France) — 1 L of SP95 super fuel has a carbon equivalent of 2.5 kg CO2/L in direct emissions and 5.5 kg CO2/L in production + direct emissions — This is based on: a 6h working day and 200 annual working days.

70

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 70

26/02/2015 16:36:07

company AND SERVICES technology and design

ROLL AND CUT TAP CUT Patent

Patent

ROLL CUT For mowing large areas.

Manual wire trimmer head.

Ref.: 57076

TAP CUT For mowing and clearing edges Semi-automatic wire head.

Plastic reel for Tap Cut

Twisted polyamide wire

Ref.: 106803

Ref.: 107373

Shell 56 m - Ø 3 mm: Ref. 108911 Shell 70 m - Ø 2.4 mm: Ref. 79601 Reel 347 m/Ø 2.4 mm: Ref. 79599 Reel 280 m/Ø 3 mm: Ref. 117453

8 tooth blade for clearing tall, dry grass.

Clearing saw for the gentle cutting of shrubs.

head screw for Roll Cut

lighting

BATTERIES AND CHARGERS

ACCESSORIES & CONSUMABLES

MOWER

Ref.: 57078

MULTI CUT

MULTI CUT For all types of mowing.

Wire and blade cutting head.

Two-prong blades For intensive clearing of tall grass.

Ref.: 57075

Ø 255 mm - Ref. 79600

Aluminium casing Mandatory for use with the saw.

Multi Cut casing

Twisted polyamide wire

Ref. 81116

Tube of 50, 20 cm strands/Ø 2.4 mm ref. 79602

Ø 200 mm - Ref. 84943

Ref. 87137

Brush cutters

Hedge Trimmers

Ø 200 mm - Ref.: 85176

blower

Patent

Reel 347 m/Ø 2.4 mm - Ref: 79599 Shell 70 m/Ø 2.4 mm - Ref: 79601

cultivator

Other accessories

Protective storage bag for the cutting heads

Standard casing

Ref. 112982 - Supplied as standard

Ref. 80367 - Supplied as standard

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 71

71

pruning shears

PRUNERS

Ref. 111800

Double harness

26/02/2015 16:36:13

101

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 72

26/02/2015 16:36:17

company AND SERVICES Hedge Trimmers

blower

MOWER

lighting

BATTERIES AND CHARGERS

technology and design

CULTIVION Cultivating soil has never been so easy!

cultivator

Brush cutters

Our company produces salads on 100 hectares of land. We use Cultivion every day in the open field (endive, chicory) and in the greenhouse for weeding.

This task used to be tedious and was carried out by hand, which meant high labour costs. With the Cultivion soil cultivator we do the work of six people in just 8 hours. This tool allows our company to obtain substantial economic gains.

Raffaele Maddalo,

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 73

73

pruning shears

PRUNERS

Pontecagnano - Italy

26/02/2015 16:36:19

CULTIVION SOIL CULTIVATOR

CULTIVION A tool that simplifies an arduous task The CULTIVION soil cultivator is the only one of its kind in the world and can be used across a large range of applications from working the soil to weeding. Due to its lightweight and stable characteristics, CULTIVION is very easy to use. CULTIVION allows you to work on the surface of the soil as well as at depth.

Hoeing of hard or clay soils

74

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 74

26/02/2015 16:36:27

company AND SERVICES technology and design BATTERIES AND CHARGERS lighting MOWER

PELLENC + points Professional • Exceptional quality and speed of work.

• Designed with agricultural workers, vegetable

blower

growers, and green spaces gardeners in mind • Runs for a full day’s work

In-depth and surface work: Hedge Trimmers

Ergonomic • Work at depth or on the surface with 9 easily adjustable positions • Small footprint and very good handling

Brush cutters

ECO-FRIENDLY • Using the cultivator once is the equivalent to watering twice • An alternative to chemical weed killers

cultivator

• Zero emissions and zero waste

MULTIPLE-FUNCTION • Hoeing, weeding, soil aeration, etc.

PRUNERS

• 5 toothed blades for different uses

Cost-effective • Time saving • Low maintenance Precision work between ornamental plants

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 75

75

pruning shears

• Multi-purpose battery

26/02/2015 16:36:38

CULTIVION SOIL CULTIVATOR

PRODUCT advantages 4-speed selector switch LED indicators

Soft Touch, comfort handle

Front handle with quick adjustment

Performance CULTIVION Blades work with an oscillating motion. This very rapid movement (up to 885 strokes / minute) provides the tool with the power and efficiency that facilitates penetration into the soil.

Stability PELLENC patent

Unlike soil tillers, CULTIVION is stable when working without the need to force the machine.

CULTIVION was designed to perform work backwards, which avoids trampling of the area already worked.

Multipurpose With the different blades you can easily adapt to all working environments. The quick change blade makes it easy to switch from one use to another.

PELLENC patent

76

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 76

26/02/2015 16:36:41

company AND SERVICES technology and design BATTERIES AND CHARGERS

see the video!

MOWER

lighting

Scan this code with your smartphone

blower

Aluminium pole

Hedge Trimmers

Revolutionary PELLENC motor with electronic switches

cultivator

Brush cutters

9 tool tilting positions

Serrated blade: better soil penetration

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 77

77

pruning shears

PRUNERS

Cultivating head is quickly interchanged

26/02/2015 16:36:42

CULTIVION SOIL CULTIVATOR

technical characteristics

CULTIVION Max. power - W

380

Combustion engine equivalence – cm³

10

Weight - kg

3.1

Oscillation speed – HZ

13 to 15

Tool speed - spm

800 to 885

Number of blades

5

Blade pivot positions

9

Noise level (LPA)* - dB(A)

82

Guaranteed noise level (LWA)* - dB(A)

91

Front handle vibration level (ah)** - m/s²

14.4

Rear handle vibration level (ah)** - m/s²

10.2

4-speed selector switch

•

Adjustable handle

•

Interchangeable blades

•

Battery life*** with ULiB 1100,

• standard

Up to 2 days

*Values determined according to acoustic measurement standards NF EN ISO 11201 and NF EN ISO 3744 ** Vibration emission value following DIN EN 60745-1:2009 - Kd uncertainty = 1.5 m/s² *** For information: the times were observed in actual working time, without taking breaks into consideration.

Battery life is influenced by the nature of the work.

Comparative table of CO2 emissions PELLENC Professional power tools eliminate nearly 99% of direct emissions of greenhouse gases compared to a combustion engine, namely, 86 times less. And, if you recharge your PELLENC batteries with our Solerion solar charger, CO2 emissions are totally eliminated.

Carbon equivalent per day

Combustion engine powered rotary hoe Direct emissions + petrol production

CULTIVION Direct emissions + electricity production

WITH SOLERION Direct emissions

15 kg CO2

258 g CO2

0 g CO2

Specifications: 1kWh EDF corresponds on average to a carbon equivalent of 90g CO2/kWh in France, covering production and the remainder of its life (ADEME-France) — 1 L of SP95 super fuel has a carbon equivalent of 2.5 kg CO2/L in direct emissions and 5.5 kg CO2/L in production + direct emissions — This is based on: a 6h working day and 200 annual working days.

78

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 78

26/02/2015 16:36:43

technology and design

company AND SERVICES

16 cm V-shaped blade

BATTERIES AND CHARGERS

ACCESSORIES & CONSUMABLES

8 cm blade For finishing work, all whilst reducing vibrations.

MOWER

lighting

For working on hard soil, for ploughed trenches.

Ref.: 100422

blower

Ref.: 83849

22 cm blade - weeding

16 cm blade

For work on the surface, for removing weeds.

Ref.: 84125

Ref.: 81251

Blades mounting kit

22 cm blade

For optimising blade changing.

PRUNERS

For a job that is extensive and at depth.

cultivator

Sold as standard

Brush cutters

Hedge Trimmers

For a job that is medium duty and at depth.

Ref.: 101003

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 79

79

pruning shears

Ref.: 79779

26/02/2015 16:36:46

101

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 80

26/02/2015 16:36:48

company AND SERVICES MOWER

lighting

BATTERIES AND CHARGERS

technology and design

SELION C21 HD New pruner, 2 kg of power and precision at your hands!

salon des maires 2009

blower

Innovation Award

salon eima 2014

Brush cutters

Hedge Trimmers

Commendation for technological innovations

Mr. Moustapha Bounzel

Arborist - Au Bonheur des Arbres Montpellier - France

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 81

81

pruning shears

PRUNERS

cultivator

"If it didn't exist, that would be a real problem.

I've been using this material since 5 years, and it is still revolutionary. After 25 years in the business, I couldn't work with the thermal models any more, it was costing me too much and at all levels. Now, I get reliability, lightness, silence, handling, aesthetics, and all without gas pollutionâ&#x20AC;&#x201D;this is exactly what I needed after so many years. Thank you and keep it up!

26/02/2015 16:36:49

SELION C21 HD pruner

SELION C21 HD A NEW PRUNER FOR INTENSIVE PROFESSIONAL USE Pruning requires specialised knowledge and suitable equipment. PELLENC offers arborists a model that will meet their expectations in terms of weight, balance, manoeuvrability, and power. Equipped with numerous innovations, the new SELION C21 HD pruner has more torque and is the lightest on the market.

Execution of pruning work

82

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 82

26/02/2015 16:36:52

company AND SERVICES technology and design BATTERIES AND CHARGERS lighting MOWER

PELLENC + points Professional • Specially designed for arborists, for use with

blower

the ultra-flat POLY 5 battery • PELLENC Brushless motor • New motor for even better performance (increased torque)

Oblique cuts at height Hedge Trimmers

• New magnesium casing for better chip evacuation • New guide for constant and optimal chain tension • Battery life provides a full day of pruning workr

Brush cutters

Ergonomic • Weighs only 2 kg!

• The claw enables a more solid grip on branches and trunks • Reinforced front hand guard

cultivator

ECO-FRIENDLY • Noise-free operation • Zero emissions and zero waste

PRUNERS

Cost-effective • At least €7 in petrol saved per day.

• Time saving • Low maintenance The claw serves as a support for a more effective attack

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 83

83

pruning shears

• Uses up to 30% less chain oil

26/02/2015 16:36:59

SELION C21 HD pruner

PRODUCT advantages On light

Reinforced fixed front hand protection Double-press start-up Ergonomic handle Soft Touch

Safety trigger

Electronic control of oil flow rate

Oil tank

Electronic chain brake

Steel fastening hook

Revolutionary PELLENC motor with electronic switching

Integrated folding key

PELLENC guide made of composite material

see the video!

Scan this code with your smartphone

84

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 84

26/02/2015 16:36:59

company AND SERVICES technology and design

A more efficient motor

The claw enables a more solid grip on branches and trunks

4 Innovative safety mechanisms • Kickback sensor with electronic start-up instantly triggers an electric chain brake in the event of a fall or kickback, and is 8 times more sensitive than a petroloperated chainsaw chain brake.

• Tool auto-diagnostic system. SELION checks during first use that the electronic kickback sensor is operational, if this is the case, the machine will operate.

• The double-press start-up trigger prevents accidental start-up of the chainsaw.

• Low kickback OREGON ® chains: the kickback phenomenon, if it occurs, will be much less violent.

lighting

NEW

BATTERIES AND CHARGERS

The shape of the magnesium casing offers improved evacuation of swarf, increased solidity and optimal lightness

MOWER

Case

NEW

blower

NEW

Automatic chain tension

The chain brake activates instantly in case of fall or kick-back.

The chain guide is mounted on a spring which allows the chain to tighten automatically.

PELLENC patent

Electronic management of oil flow

A folding key is integrated

The system adjusts chain lubrication according to the cutting force required.

This wrench retightens the chain and gives quick access to the pin and the chain.

PELLENC patent

PELLENC patent

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 85

PRUNERS

PELLENC patent

cultivator

Chain brake electronic switching

85

pruning shears

stop

Brush cutters

Hedge Trimmers

Automatic chain tension

26/02/2015 16:37:18

SELION C21 HD pruner

technical characteristics SELION C21 HD

Combustion engine equivalence – cm³

45

Weight - kg

2

Motor speed – rpm

6200

Chain speed - m/s

14.5

Guide length - cm / inches

30 / 12’’

Oregon chain Pitch Type / Number of links

¼’’ 25AP / 70E

Pinion

11 quarter inch (¼ ‘’) teeth

Tank capacity - cl

25

Noise level (LPA)* - dB(A)

84

Guaranteed noise level (LWA)* - dB(A)

96

Front handle vibration level (ah)** - m/s²

2.8

• • • •

Peristaltic pump Automatic chain tensioner Integrated folding key Electronic chain brake Battery life*** with POLY 5 ULiB • standard

Up to 1 day

*Values determined according to the acoustic measurement standards DIN EN ISO 3744:1995 and DIN EN ISO 11201:1996 ** Vibration emission value following DIN EN 60745-2-13:2008 - Kd uncertainty = 1.5m/s² *** For information: the times were observed in actual working time, without taking breaks into consideration.

Battery life is influenced by the nature of the work.

Comparative table of CO2 emissions

PELLENC Professional power tools eliminate nearly 99% of direct emissions of greenhouse gases compared to a combustion engine, namely, 86 times less. And, if you recharge your PELLENC batteries with our Solerion solar charger, CO2 emissions are totally eliminated.

Carbon equivalent per day

combustion engine pruner Direct emissions + petrol production

SELION c21 HD Direct emissions + electricity production

WITH SOLERION Direct emissions

24 kg CO2

204 g CO2

0 g CO2

Specifications: 1kWh EDF corresponds on average to a carbon equivalent of 90g CO2/kWh in France, covering production and the remainder of its life (ADEME-France) — 1 L of SP95 super fuel has a carbon equivalent of 2.5 kg CO2/L in direct emissions and 5.5 kg CO2/L in production + direct emissions — This is based on: a 6h working day and 200 annual working days.

86

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 86

26/02/2015 16:37:18

technology and design

company AND SERVICES

12˝ guide

BATTERIES AND CHARGERS

ACCESSORIES & CONSUMABLES ¼" – 25AP – 70E OREGON chain Anti-kickback chain

Ref.: 72884

12˝ carving guide bar

Sold as standard

Ref.: 81794

Sharpening kit

blower

Sold as standard

MOWER

lighting

30 cm guide made of composite material.

Contents: round file, flat file and splitter.

Ref.: 80344

Brush cutters

Hedge Trimmers

Carving bar.

Ref.: 68520

cultivator

Biodegradable chainsaw oil

PRUNERS

5 litre jerrycan.

Biodegradable chain oil.

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 87

87

pruning shears

Ref.: 116688

26/02/2015 16:37:23

101

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 88

26/02/2015 16:37:25

company AND SERVICES BATTERIES AND CHARGERS

an lightweight electric pruner!

technology and design

M12 Selion

lighting

agrilevante 2011

Technical Innovation Award

sival 2011

MOWER

Distinction

vinitech 2010

Brush cutters

Hedge Trimmers

blower

Bronze Medal

PRUNERS

cultivator

I have the entire Espaces Verts range (ULiB 400, 700, and Poly 5 batteries ) except Cultivion. Ever since I started using PELLENC tools, my company has changed pace. I do the work more calmly, faster and more comfortably. I often use the Selion M12 pruner and Helion hedge trimmers, two products that I really like. Besides that, I confirm the savings that the products that use PELLENC batteries bring me. I also appreciate the professional service.

Franco Pizzolorusso

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 89

89

pruning shears

Andria - Italy

26/02/2015 16:37:27

SELION m12 HAND-held pruner

SELION M12

This PROFESSIONAL AND LIGHTWEIGHT pruner...

WHICH IS THE FIRST OF ITS KIND! The SELION M12 is one of a kind, thanks to its weight and its exclusive design that lends itself to a wide range of potential uses. Whether in green spaces, vineyards or orchards, SELION M12 makes light work of pruning with its size, precision and quality cutting power.

Pruning of a dead section in an urban area

90

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 90

26/02/2015 16:37:32

company AND SERVICES technology and design BATTERIES AND CHARGERS lighting MOWER

PELLENC + points

blower

Professional • PELLENC 1200 W Brushless motor (Equivalent to 30 cc) • No gears and with direct drive to the chain

Pruning of a mulberry-plane tree

Hedge Trimmers

sprocket: better durability and reliability • Pruner designed for fruit growers and vineyards • At least a full day’s work from a single charge

Brush cutters

Ergonomic • A unique product with its exclusive design.

• Ergonomic Soft Touch handle • Only 1.7 kg in hand!

cultivator

ECO-FRIENDLY • Noise-free operation • Zero emissions and zero waste

PRUNERS

Cost-effective • At least €7 in petrol saved per day.

• Time saving • Low maintenance

Pruning of a shade tree in a school yard

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 91

91

pruning shears

• Uses up to 30% less chain oil

26/02/2015 16:37:36

SELION m12 HAND-held pruner

PRODUCT advantages Revolutionary Pellenc motor with electronic switching

Electronic chain brake

Integrated folding key

Oil tank

Electronic control of oil flow rate

Lateral sawdust ejection

Power "On" indicator

Safety trigger

Double-press start-up

Ergonomic handle Soft Touch

92

Hand guard

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 92

26/02/2015 16:37:37

BATTERIES AND CHARGERS blower

PELLENC guide made of composite material

technology and design

company AND SERVICES

Removable chain guard

lighting

Scan this code with your smartphone

Safety is paramount and PELLENC has developed 4 innovations to help protect the user: • kickback sensor with electronic start-up: this device instantly triggers an electric chain brake in the event of a fall or kickback, and is 8 times more sensitive than a Combustion engine-operated chainsaw chain brake.

• The second safety feature is part of the tool’s auto-diagnostic system: SELION checks during first use that the electronic kickback sensor is operational, if this is the case, the machine will operate!

• The third safety feature is the double-press start-up trigger: this prevents accidental start-up of the chainsaw.

• The final safety feature is the use of OREGON chains with little kickback: the kickback phenomenon, if it occurs, will be much less violent than that of a traditional chainsaw.

MOWER

Safety

see the video!

Hedge Trimmers

A folding key is integrated This wrench retightens the chain and gives quick access to the pin and the chain

Automatic chain tension

Pellenc patent

Electronic management of oil flow The system adjusts chain lubrication according the cutting force required.

Pellenc patent

stop

Chain brake electronic switching The chain brake activates instantly in case of fall or kick-back.

Pellenc patent

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 93

PRUNERS

cultivator

The chain guide is mounted on a spring which makes it possible for the chain to tighten automatically.

93

pruning shears

Automatic chain tension

Brush cutters

Pellenc patent

26/02/2015 16:37:39

SELION m12 HAND-held pruner

technical characteristics SELION M12 Max. power - W

1,200

Combustion engine equivalence – cm³

30

Weight - kg

1.7

Motor speed – rpm

5400

Chain speed - m/s

10.3

Guide length - cm / inches

15 / 6’’

Oregon chain Pitch Type / number of links

¼’’ 25AP / 42E

Pins

9 quarter inch (¼ ‘’) teeth

Tank capacity - cl

7

Noise level (LPA)* - dB(A)

86

Guaranteed noise level (LWA)* - dB(A)

96

Front handle vibration level (ah)** - m/s²

2.8

• • • • •

Peristaltic pump Automatic chain tensioner Integrated folding key Electronic chain brake Carrying case Battery life*** with ULiB 1100, • Standard

Up to 2 days

*Values determined according to the acoustic measurement standards DIN EN ISO 3744:1995 and DIN EN ISO 11201:1996 ** Vibration emission value following DIN EN 60745-2-13:2008 - Kd uncertainty = 1.5 m/s² *** For information: the times were observed in actual working time, without taking breaks into consideration.

Battery life is influenced by the nature of the work.

Comparative table of CO2 emissions PELLENC Professional power tools eliminate nearly 99% of direct emissions of greenhouse gases compared to a combustion engine, namely, 86 times less. And, if you recharge your PELLENC batteries with our Solerion solar charger, CO2 emissions are totally eliminated.

Carbon equivalent per day

combustion engine pruner Direct emissions + petrol production

SELION M12 Direct emissions + electricity production

WITH SOLERION Direct emissions

24 kg CO2

204 g CO2

0 g CO2

Specifications: 1kWh EDF corresponds on average to a carbon equivalent of 90g CO2/kWh in France, covering production and the remainder of its life (ADEME-France) — 1 L of SP95 super fuel has a carbon equivalent of 2.5 kg CO2/L in direct emissions and 5.5 kg CO2/L in production + direct emissions — This is based on: a 6h working day and 200 annual working days.

94

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 94

26/02/2015 16:37:40

technology and design

company AND SERVICES

6˝ carving guide bar

BATTERIES AND CHARGERS

ACCESSORIES & CONSUMABLES 6˝ Anti-kickback guide 15 cm guide made of composite material.

Sold as standard

Ref.: 80343

Sharpening kit

Comes standard while stocks last.

MOWER

lighting

Carving bar for pruning or woodcutting.

Ref.: 78790

Anti-kickback chain

Ref.: 68520

Sold as standard

Brush cutters

Hedge Trimmers

Contents: round file, flat file and splitter.

blower

¼" – 25AP – 42E OREGON chain

Ref.: 71550

cultivator

Biodegradable chainsaw oil

PRUNERS

5 litre jerrycan.

Biodegradable chain oil.

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 95

95

pruning shears

Ref.: 116688

26/02/2015 16:37:46

101

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 96

26/02/2015 16:37:48

company AND SERVICES lighting

BATTERIES AND CHARGERS

technology and design

SELION POLE GO HIGHER AND LIGHTER!

forexpo 2008

Brush cutters

Hedge Trimmers

blower

MOWER

Distinction for “Safety and Working Conditions”

cultivator

“I use PELLENC equipment, notably 36 Olivium, 10 Selion Pole and 20 Lixion. Since 2006, our interest in these products has continued to grow, given their technological innovation which meets the present and future needs of our viticulture and olive growing production processes.“ Mr Abdelaziz El Kouane

20140126_catalogue GCT 2015_EN.indd 97

97

pruning shears

www.pellenc.com

PRUNERS

Production Manager, the Brahim Znibe Group Vineyards

26/02/2015 16:37:50

SELION PERCHE POLESAW

SELION POLE: PRUNING AT HEIGHT WITHOUT EFFORT The SELION P130 and SELION P180 fixed polesaws and SELION T150/200 and SELION T220/300 telescopic polesaws cut with precision. With a reach of up to 3 meters, work can be carried out without a carrying harness because of their lightness. SELION polesaws are ideal for use in noise sensitive areas. They are also powerful enough for forestry work.

Pruning on a golf course

98

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 98

26/02/2015 16:37:52

company AND SERVICES Technology and Design BATTERIES AND CHARGERS lighting MOWER

PELLENC + points

blower

Professional • PELLENC 1200 W Brushless motor (Equivalent to 30 cc) • 4 models with fixed or telescopic pole Hedge Trimmers

• |At heights of up to 3 m • Used for pruning olive trees, or for forestry work • At least a full day’s work from a single charge

Brush cutters

Ergonomic • Multi-position tilting head • Stability during cutting due to its lightness

cultivator

ECO-FRIENDLY • Uses biodegradable chain oil • Zero emissions and zero waste

PRUNERS

Cost-effective • At least €7 in petrol saved per day.

• Time saving • Low maintenance

Olive growing pruning season

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 99

99

pruning shears

• Uses up to 30% less chain oil

26/02/2015 16:37:54

SELION PERCHE POLESAW

PRODUCT advantages

Tightening sleeve

On light

Safety trigger

Carbon fibre fixed or telescopic pole

Oil tank

Selion P130

Selion P180 see the video!

Selion T150-200

Selion T220-300

100

Scan this code with your smartphone

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 100

26/02/2015 16:38:00

company AND SERVICES technology and design

PELLENC guide made of composite material Automatic tensioning of the chain

lighting

Revolutionary Pellenc motor with electronic switching

BATTERIES AND CHARGERS

Integrated folding key

blower

MOWER

Electronic management of oil flow

Hedge Trimmers

Automatic chain tension The chain guide is mounted on a spring which tightens the chain automatically.

Tilting head multiposition The tool easily adapts to the working environment thanks to its head, which tilts to +90째/-45째.

PELLENC patent

The system adjusts chain lubrication according the cutting force required.

PELLENC patent

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 101

PRUNERS

This wrench retightens the chain and gives quick access to the pin and the chain.

Electronic control of oil flow rate

101

pruning shears

A folding key is integrated

cultivator

Brush cutters

PELLENC patent

26/02/2015 16:38:02

SELION PERCHE POLESAW

technical characteristics SELION POLE: Max. power - W Combustion engine equivalence – cm³ Weight - kg Motor speed – rpm

P130

P180

T150/200

T220/300

1,200

1,200

1,200

1,200

30

30

30

30

2.7

2.8

2.9

3.4

5400

5400

5400

5400

Length of the pole - cm

130

180

150 to 200

220 to 300

Chain speed - m/s

10.3

10.3

10.3

10.3

25 / 10“

25 / 10“

25 / 10“

25 / 10“

¼’’ 25AP / 58E

¼’’ 25AP / 58E

¼’’ 25AP / 58E

¼’’ 25AP / 58E

9 quarter inch (¼ ‘’) teeth

9 quarter inch (¼ ‘’) teeth

9 quarter inch (¼ ‘’) teeth

9 ¼‘’ teeth

Guide length - cm / inches Oregon chain Pitch Type / Number of links Pins Tank capacity - cl

25

25

25

25

Noise level (LPA)* - dB(A)

86

84

82

80

93

91

91

93

Vibration level (ah)** - m/s²

Guaranteed noise level (LWA)* - dB(A)

≤ 2.5

≤ 2.5

≤ 2.5

≤ 2.5

Multi-position tilting head.

+90°/-45°

+90°/-45°

+90°/-45°

+90°/-45°

• • •

• • •

• • • •

• • • •

Telescopic pole Peristaltic pump Automatic chain tensioner Integrated folding key Battery life*** with ULiB 1100, • standard

Up to 2 days

*Values determined according to the acoustic measurement standards DIN EN ISO 11680-1:2002/2009 – Value increased by K=2.5 according to ISO 4871 ** Vibration emission value following DDIN EN ISO 11680-1:2002/2009 - Kd uncertainty = 1.5m/s² *** For information: the times were observed in actual working time, without taking breaks into consideration.

Battery life is influenced by the nature of the work.

Comparative table of CO2 emissions PELLENC Professional power tools eliminate nearly 99% of direct emissions of greenhouse gases compared to a combustion engine, namely, 86 times less. And, if you recharge your PELLENC batteries with our Solerion solar charger, CO2 emissions are totally eliminated.

Carbon equivalent per day

combustion engine pruner Direct emissions + petrol production

Selion POLE Direct emissions + electricity production

WITH SOLERION Direct emissions

24 kg CO2

204 g CO2

0 g CO2

Specifications: 1kWh EDF corresponds on average to a carbon equivalent of 90g CO2/kWh in France, covering production and the remainder of its life (ADEME-France) — 1 L of SP95 super fuel has a carbon equivalent of 2.5 kg CO2/L in direct emissions and 5.5 kg CO2/L in production + direct emissions — This is based on: a 6h working day and 200 annual working days.

102

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 102

26/02/2015 16:38:02

technology and design

company AND SERVICES

6˝ carving guide bar

BATTERIES AND CHARGERS

ACCESSORIES & CONSUMABLES 10˝ guide 25 cm guide made of composite material.

Ref.: 80343

¼" – 25AP – 58E OREGON chain

Ref.: 66756

Sold as standard

¼" – 25AP – 42E OREGON chain Anti-kickback chain

Ref.: 64486

Biodegradable chainsaw oil

Sold as standard

Ref.: 71550

Sharpening kit

Ref.: 85920

PRUNERS

cultivator

5 litre jerrycan.

Biodegradable chain oil.

1 round file 1 flat file 1 shunter Ref.: 68520

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 103

103

pruning shears

Sold as standard

Brush cutters

Hedge Trimmers

Anti-kickback chain

blower

Sold as standard

MOWER

lighting

Carving bar for pruning or woodcutting.

26/02/2015 16:38:08

101

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 104

26/02/2015 16:38:11

company AND SERVICES Hedge Trimmers

blower

MOWER

lighting

BATTERIES AND CHARGERS

technology and design

TREELION POWERFUL AND PRECISE PRUNING SHEARS

cultivator

Brush cutters

I have a Helion hedge trimmer, a Selion pruner, a Treelion M45 and the 200, Poly 5 and 1100 batteries. The pruning quality of the Treelion M45 is very good, the tool is light and after 8 hours of use, I don't feel tired. With these tools, I lose less time managing consumable, and making adjustments. With a tank full of oil, I can work a full day with the Selion m45. In addition to the fuel economy, I do not breathe any exhaust and noise is minimised. I'm also make a very good impression on my clients with my futuristic equipment!

Augusto Garutti

20140126_catalogue GCT 2015_EN.indd 105

105

pruning shears

www.pellenc.com

PRUNERS

Gardener for green spaces and Vice President of the gardeners group LAPAM in Modena and Reggio Emilia - Italy

26/02/2015 16:38:13

TREELION pruner for green spaces and fruit growing

TREELION Versatility that is ironclad The TREELION pruning shear range offers users unrivalled cutting power and quality of work.

Whether it is the TREELION M45 handheld model or the TREELION D45 two-handed pole model, they function in the same way and offer the same advantages. TREELION pruning shears are able to cut up to 45 mm in diameter, and are suitable for fruit growing as well as green spaces.

Large cutting diameter on a mulberry-plane tree

106

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 106

26/02/2015 16:38:18

company AND SERVICES technology and design BATTERIES AND CHARGERS lighting

PELLENC + points

MOWER

Professional • Exceptional speed and cutting power.

• Cutting diameter up to 45 mm • A range of 4 models • Continuous or pulsed mode blower

• Designed for large sections of intensive pruning in orchards or parks • Enough battery life for a full day’s work A handy shear for all maintenance and training work

Hedge Trimmers

Ergonomic • Adjustable intermediate opening • Unrivalled power and cutting quality • Automatic safety standby • Slim handle with Soft Touch coating Brush cutters

• Handle and head can be adjusted for left-handed users (for pole models) • 3 two-handed pole models, for working at height or in dense vegetation.

cultivator

ECO-FRIENDLY • Zero emissions generated by a compressor or hydraulic unit

PRUNERS

Cost-effective • No compressor or hydraulic unit • Autonomous (as Kit with battery) or adaptable version 3 poles models to facilitate working at height

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 107

107

pruning shears

• Multi-purpose battery

26/02/2015 16:38:25

TREELION pruner for green spaces and fruit growing

PRODUCT advantages

see the video!

Scan this code with your smartphone

Automatic standby mode

Soft Touch, comfort handle

Revolutionary PELLENC motor with electronic switching

Weight: 945â&#x20AC;Żg

Double trigger

TREELION RANGE

TREELION M45

108

TREELION D45-700

TREELION D45-900

TREELION D45-1500

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 108

26/02/2015 16:38:27

company AND SERVICES technology and design BATTERIES AND CHARGERS

PELLENC system blade clearance adjustment axis Pradines cutting head

Flexibility of use Cutting diameter: 45 mm

Pruning shears adjustment: - Blade opening angle: 5 intermediate opening positions

Adjustable half-opening

PELLENC patent

TREELION Adaptable Double Handle

cultivator

- 3 two-handed models - Great precision - Left-/right-handed adjustment - For working at height or in dense vegetation.

Do you already own a PELLENC UliB battery?

PELLENC patent

400

700

1100

MOWER Hedge Trimmers

- Blade overlap angle 6 blade overlap and hook positions.

blower

PELLENC patent

Brush cutters

Blade opening: 65 mm

- Progressive Mode: for precision work - Pulsed mode: for rapid and repeated cutting - Wide opening mode: allows you to switch from an intermediate opening to a wide opening with a single press of the trigger.

lighting

3 modes of operation

Poly 5

The adapter is included.

The double trigger system allows you to switch from an semi-opening to a wide one with a single press.

The user benefits from a gain in speed and ease of use.

PRUNERS

Double trigger The Treelion adaptable pruning shears is available without the Ulib 200 battery.

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 109

109

pruning shears

PELLENC patent

26/02/2015 16:38:29

TREELION pruner for green spaces and fruit growing

technical characteristics

TREELION

D45-1500

D45-900

D45-700

M45

1,000

1,000

1,000

1,000

1.9

1.7

1.6

0.945

18,000

18,000

18,000

18,000

1500

900

700

215

Blade opening - mm

65

65

65

65

Cutting diameter - mm

45

45

45

45

Noise level (LPA)* - dB(A)

≤ 70

≤ 70

≤ 70

≤ 70

Guaranteed noise level (LWA)* - dB(A)

≤ 81

≤ 81

≤ 81

≤ 81

Vibration level (ah)** - m/s²

≤ 2.5

≤ 2.5

≤ 2.5

≤ 2.5

Automatic standby mode

•

•

•

•

Double trigger

•

•

•

•

3 operating modes

•

•

•

•

Electronic blade adjustment

•

•

•

•

Rotating cutting head and handle

•

•

•

-

Holster

-

-

-

•

Carrying case

-

-

-

•

Operates on all PELLENC ULiB

•

•

•

•

Max. power - W Weight - kg Motor speed – rpm Length - mm

Battery life*** with ULiB 400,

• standard

110

Up to 3 days

* Values ​​of acoustic measures according to the Directive EN 50260-1: 2005 - Uncertainty according to ISO 4871 ** Vibration emission value following EN 50260-1: 2005 - Kd uncertainty = 1.5 m/s² *** For information: the times were observed in actual working time, without taking breaks into consideration.

Battery life is influenced by the nature of the work.

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 110

26/02/2015 16:38:29

technology and design

company AND SERVICES

TREELION cutting head pin kit

blower

MOWER

lighting

BATTERIES AND CHARGERS

ACCESSORIES & CONSUMABLES

Tube of grease

Brush cutters

Ref.: 35749

Ref.: 73100

Sharpening stone

Hedge Trimmers

For greasing the cutting head

Pruning shears blade pin, nut and washers

cultivator

TREELION blade kit

PRUNERS

For cleaning and sharpening the blade.

Ref.: 73101

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 111

111

pruning shears

Ref.: 02322

26/02/2015 16:38:31

STAY CONNECTED to get all of the latest pellenc news www.pellenc.com

and JOIN us on THE DIFFERENT social-media platforms

We hope you enjoy browsing

112

www.pellenc.com

20140126_catalogue GCT 2015_EN.indd 112

26/02/2015 16:38:38

20140126_catalogue GCT 2015_EN.indd 113

26/02/2015 16:38:38

Notes :

20140126_catalogue GCT 2015_EN.indd 114

26/02/2015 16:38:38

Special thanks: Jardins d’Albertas - Aix-en-Provence - www.jardinsalbertas.com

Patented Equipment. The technical specifications and photographs are provided for informational use only, and are in no way contractually binding.

PELLENC reserves the right, without prior notice, to make any modifications and improvements it deems necessary to its products.

For your safety, PELLENC recommends to the users to refer to the manual supplied with the tools.

Photo credits ©PELLENC — Design: PELLENC communications department.

120093_CATALOGUE GCT 2015_COUV ENG.indd 2

25/02/2015 17:00:42

Catalogue 2015 - 2016 

Local communities - Green and urban spaces



Local communities Green and urban spaces

Quartier Notre Dame - Route de Cavaillon - BP 47 - 84122 Pertuis Cedex - France

ENG- 03/2015 - 120095

PELLENC S.A.

Catalogue 2015 - 2016

Distributor’s stamp

Tel.: +33 (0) 4 90 09 47 00 - Fax: +33 (0) 4 90 09 64 09 - E-Mail: pellenc.sa@pellenc.com - www.pellenc.com

120093_CATALOGUE GCT 2015_COUV ENG.indd 1

25/02/2015 17:00:42