PELLENC Notice Charging Station EN

PELLENC CHARGING STATION PELLENC BATTERY CHARGING SYSTEM USER GUIDE

ENG Original instructions

56_136922-A 02/2018

READ THE USER GUIDE CAREFULLY BEFORE USING THE MACHINE

Quartier Notre-Dame 84120 Pertuis (FRANCE)

Tél : +33 (0)4 90 09 47 00 Fax : +33 (0)4 90 09 64 09 e-mail : pellenc.sa@pellenc.com www.pellenc.com

USER GUIDE PELLENC

CHARGING STATION

TAB L E OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 GENERAL SAFETY INSTRUCTIONS FOR THE TOOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SAFETY MEASURES ASSOCIATED WITH THE USE OF THE CHARGING STATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SAFETY MEASURES RELATING TO THE USE OF PELLENC CHARGERS AND BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SAFETY CONDITIONS RELATING TO THE TECHNOLOGIES USED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 5 6 6

SAFETY SIGNALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 SAFETY SIGNALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 DESCRIPTION AND TECHNICAL CHARACTERISTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 CHARGING STATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 HMI (HUMAN-MACHINE INTERFACE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

DESCRIPTION AND TECHNICAL CHARACTERISTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 COMPATIBILITY BETWEEN CHARGERS AND PELLENC BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

INSTALLATION, STARTING UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 INSTALLED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ITEMS SUPPLIED WITH THE CHARGING STATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ELECTRICAL INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

INSTALLING CHARGERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CONNECTING CHARGERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

OVERRIDE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

INSTALLATION OF TOUCHSCREEN TABLET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FIRST STARTUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11 13 14 16 18 19 19 20

SETTINGS / CONVERSIONS MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DETAILS OF CALCULATIONS FOR SAVINGS MADE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ECONOMY / CONSUMPTION / ENVIRONMENT MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BATTERY SETTINGS MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CHARGE TIME PARAMETER SETTINGS MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

STATISTICS MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21 22 22 23 24 24

USE OF THE HMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

CHANGING TABLE - DATA BACK-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 REPLACING THE TOUCHSCREEN TABLET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 DATA BACK-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 CONNECTION BETWEEN TABLET AND CHARGING STATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

PELLENC S .A . WARRANTY AND AFTER-SALES SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 "EU" STATEMENT OF COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

3

USER GUIDE PELLENC

CHARGING STATION

■ INTRODUCTION Dear Customer, Thank you for buying the PELLENC CHARGING STATION. Correctly used and maintained, this tool will give years of satisfactory performance.

PROTECTING THE ENVIRONMENT YOUR DEVICE CONTAINS NUMEROUS RECOVERABLE OR RECYCLABLE MATERIALS. RETURN IT TO YOUR DEALER OR, FAILING THIS, TO AN APPROVED SERVICING CENTRE TO BE TREATED. Comply with the regulations in force in your country regarding environmental protection associated with your activity.

■ IMPORTANT SAFETY INSTRUCTIONS KEEP THIS USER GUIDE THIS MANUAL CONTAINS IMPORTANT INFORMATION AND OPERATING INSTRUCTIONS FOR THE PELLENC CHARGING STATION. READ ALL INSTRUCTIONS AND WARNINGS FEATURED ON THE CHARGING STATION BEFORE USE. ALWAYS COMPLY WITH THE INSTRUCTIONS AND ILLUSTRATIONS IN THE MANUAL.

• The PELLENC CHARGING STATION is a professional tool, for use only with compatible PELLENC tools (Pellenc chargers and batteries).

• The PELLENC company accepts no responsibility for any damage caused by improper or unspecified use different from its original intention.

• The PELLENC company accepts no responsibility for any damage caused by the use of non-original parts or accessories.

Throughout this user guide, you will find warnings and information with the headings: NOTE, WARNING or CAUTION. NOTES provide additional information, clarify a point, or explain a step in more detail.

WARNINGS or CAUTIONS call attention to a procedure which, if not performed or incorrectly performed, could cause physical damage and/or serious injury.

The warning G indicates that damage resulting from failure to comply with the procedures and instructions is not covered by the warranty and the owner will be liable for any repair costs.

Safety signs on the picker also indicate the safety precautions to be observed. Locate these signs and read them before using your machine. Any partially illegible or damaged sign should be replaced immediately.

Refer to the "SAFETY SIGNS" section, which shows where the signs are on the tool.

No part of this manual may be reproduced without the written permission of PELLENC. The illustrations in the manual are provided for information only, and are in no way contractually binding. PELLENC reserves the right, as it sees fit, to incorporate modifications or improvements in its products without having to inform the owners of similar products of these changes. The manual is an integral part of the picker and must accompany the picker in case of transfer.

4

USER GUIDE PELLENC

CHARGING STATION

ʚ GENERAL SAFETY INSTRUCTIONS FOR THE TOOL CAUTION READ ALL THE SAFETY MEASURES AND ALL THE INSTRUCTIONS. RETAIN ALL THE SAFETY MEASURES AND INSTRUCTIONS FOR LATER READING.

This device is not intended for use by individuals (including children) with reduced physical, sensory or mental capabilities, nor by anyone lacking in experience or knowledge, except if they are supervised or have received prior instructions from a person responsible for their safety.

WORK AREA SAFETY 1– Keep the working area clean and well-lit, with enough space to ensure the machine remains cool.

2– Do not operate power tools in an explosive atmosphere, for example in the presence of flammable liquids, gases, or dust.

3– Keep children and persons present away when using the tool.

ELECTRICAL SAFETY 1– Never modify the connector or any other part of the device in any way whatsoever.

2– Do not misuse the power cords. Do not use cables for carrying, pulling or disconnecting batteries or chargers. Keep cables away from heat, oil, sharp edges, and moving parts.

3– If the input and/or output cables are cut or damaged, contact the authorised distributor where it was purchased.

4– Do not introduce any metal objects into the device such as paper clips, coins, keys, nails, screws or other small metal objects likely to short circuit its components.

5– Do not immerse the device in water. Use indoors only (no water misting).

PERSONAL SAFETY 1– Remain vigilant, watch what you are doing and use common sense when using the device. Do not use the device if you are tired or under the influence of drugs, alcohol or medication.

MAINTENANCE AND UPKEEP 1– Have the device serviced by an approved PELLENC dealer, using only identical spare parts.

ʚ SAFETY MEASURES ASSOCIATED WITH THE USE OF THE CHARGING STATION 1– During operation, the charging station temperature can reach 60° C. There must be no flammable material within 1.5 m of the charging station and the batteries.

2– Place the charging station out of the reach of children and on a non-flammable support.

3– Do not interfere with its cooling cycle.

4– The sockets inside the charging station are intended only for use with PELLENC chargers.

5– The charging location must be equipped with a class D fire extinguisher (for metal fire) in good working order.

6– If the power cable is cut or damaged, contact your authorised distributor or an electrician, so that the cable can be replaced.

7– The charging station is designed for PELLENC chargers, and for organising the charging of Pellenc tools lithium-ion batteries.

8– Do not use it for any other purposes.

9– Children must be supervised to ensure they do not play with the charging station.

10– Verify that the cables cannot be folded and do not come into contact with hot surfaces or sharp edges.

11– Ensure good ventilation during the charge.

12– Never cover the charging station.

13– The charging station must not be used outdoors (or exposed to water).

14– Make sure the power connector is not exposed to water.

15– Never charge a damaged battery.

16– Grid connection must comply with national electrical regulations (EN60204-1).

17– Check the wiring of the charging station before use. Never use the charging station if the wiring is damaged

5

USER GUIDE PELLENC

CHARGING STATION

ʚ SAFETY MEASURES RELATING TO THE USE OF PELLENC CHARGERS AND BATTERIES PLEASE REFER TO THE RELEVANT BATTERY OR CHARGER INSTRUCTION LEAFLET.

ʚ SAFETY CONDITIONS RELATING TO THE TECHNOLOGIES USED • A professional electrician must install the electrical equipment, using the wiring diagrams supplied with the charging station.

Type of power cable: H07RN-F 3G2.5 • The charging station connects directly to a device fitted with a 16 A (C16) circuit-breaker and a sectioning switch.

• The mains supply must be equipped with a 30mA differential circuit breaker compliant with electrical safety standards for people.

• If you cannot start the machine, please contact the approved dealer.

ONLY A QUALIFIED ELECTRICIAN SHOULD WORK ON THE ELECTRICAL BOX (RISK OF ELECTROCUTION)

■ SAFETY SIGNALS

Use indoors only.

Read the user guide.

+45°C

This equipment must be used at a temperature of between -5° and +45 °C.

-5°C

This device contains numerous recoverable or recyclable materials. Return it to your dealer or, failing this, to an approved servicing centre to be treated.

Equipment compliant with EC standards.

This device is to be used only for recharging PELLENC batteries Do not connect anything other than PELLENC chargers to the sockets inside the charging station.

6

A utiliser uniquement avec les chargeurs de batterie PELLENC pour charger des batteries PELLENC

USER GUIDE PELLENC

CHARGING STATION

â– SAFETY SIGNALS Ref.: 135293

SA Quartier Notre-Dame Route de Cavaillon - CS 10047 84122 Pertuis Cedex (FRANCE) +33 (0)4 90 09 47 00 www.pellenc.com

Designation Type Year SN

Ref.: 140151

: Charge Monitor : Pellenc Charging Station : :

Mass w/o chargers Rated voltage Rated frequency Rated power Rated current

: : : : :

75kg 220-240V 50/60Hz 2000W max.

10A max.

Ref.: 135294 Maximum available power: 2,000W The 10 connectors in the electrical box are reserved only for PELLENC chargers.

No other appliance must be connected to these sockets.

READ THE INSTRUCTIONS BEFORE USE

50.2V 7.6A max

1/10

Hazardous voltage: XYZ

X/10

XYZ

10/10

< 2000W max.

7

USER GUIDE PELLENC

CHARGING STATION

■ DESCRIPTION AND TECHNICAL CHARACTERISTICS ʚ CHARGING STATION

1

1– Charging station 2– Door 3– Locks 4– Touchscreen tablet 5– Cables for battery connections (x10) 6– Cabinet power supply cable 7– Fan 8– Supporting shelves for chargers 9– Electrical box 10– Charger power sockets (x10) 11– XLR connectors (x10) to connect the chargers to the electrical box.

12– Override on/off switch

5

2

3 4 6

7

10

12

9 8 11 There is an F10AH250V fuse inside the box, compliant with standard CEI 60127.

8

USER GUIDE PELLENC

CHARGING STATION

Ê&#x161; HMI (HUMAN-MACHINE INTERFACE)

1

2

7

3

8 9

4

10 11

5

12

6 1

Image of layout of batteries, according to the chargers connected in the charging station.

2

Economy / consumption / environment menu

3

Battery settings menu

4

Statistics menu

5

Settings / conversions menu

6

Main screen / display of chosen menu

7

Time zone

8

Time

9

Date

10

Name / default PELLENC CHARGING STATION

11

Name and identification of connected stations

12

Real time power consumption of chargers / Bluetooth connection indicator

9

USER GUIDE PELLENC

CHARGING STATION

■ DESCRIPTION AND TECHNICAL CHARACTERISTICS ʚ COMPATIBILITY BETWEEN CHARGERS AND PELLENC BATTERIES CHARGERS CB5010HV CB5012 (1A) (1.2A)

BATTERIES

Type

Com. ref.

Marking Allocated according to capacity IEC/EN61960 (Ah)

ULiB 250

57107

12INR19/66-2

ULiB 400

57065

Olivion+

Type of elements

Number of elements

5.4

Lithium-ion

24

12INR19/66-4

8.4

Lithium-ion

48

57173

12INR19/66-6

16.2

Lithium-ion

72

ULiB 700

56242

12INR19/66-6

16.2

Lithium-ion

72

ULiB 1100

57028

12INR19/66-8

21.6

Lithium-ion

96

ULiB 1200

57181

12ICR19/66-8

27.2

Lithium-ion

96

ULiB 1500

57180

12ICR19/6610

34

Lithium-ion

120

132658

62398

CB5022 (2.2A) 60026

CB5030HV CB5075 (3.75A) (7.6A) 131941

57011

Compatible charger and battery Compatible but slow charge (>12h to charge from 0 to 100%)

See battery instructions to estimate charging time according to charger used.

Reminder of use of Quick Charger CB5075 (7.6A) If after charging with the CB5075 charger the battery display indicates less than 95%, the next time the battery is charged it must be done with the original charger.

The sticker shown below is affixed to the CB5075 charger as a visual reminder of this warning.

10

USER GUIDE PELLENC

CHARGING STATION

■ INSTALLATION, STARTING UP ʚ INSTALLED Weight of empty cabinet: 75 kg.

Weight of cabinet with chargers: up to 90 kg depending on chargers installed.

FIXING CHARGING STATION TO WALL The cabinet may be fixed only to a brick-built type wall.

4 anchorage pins are needed to fix the station in place. Use anchorage pins suitable for the type of wall which will support the station: => For a solid concrete wall (not subject to cracking) or a solid brick wall: RS PRO - REF 908-6895 or RAWL FIXINGS - REF R-RBL-M06/10W => For a natural stone, breeze block or hollow block wall: RAWL FIXINGS - REF R-RBL-M06/10W Stages: 1– Drill 4 x 12mm holes, 55mm deep at the positions specified below. Comment: For fixing to a brick wall, the pins must not be inserted in the mortar joints.

2– Remove the debris, and clean the holes thoroughly with a brush or suitable pump.

3– Separate the pre-assembled bolts and washers, then insert the pins into the 4 holes using a hammer, until they are flush.

4– Screw the 2 bolts and washers into the top fixings, and tighten them to the torque recommended for the chosen model (6 Nm for the RS PRO brand / 6.5 Nm for the RAWL FIXINGS brand).

5– Unscrew the 2 bolts to leave a gap of 5mm between the washers and the wall so that the panel of the cabinet fits between the washers and the wall.

6– Using suitable handling equipment lift the cabinet and put it in place on to the pins (6 Nm for the RS PRO brand / 6.5 Nm for the RAWL FIXINGS brand).

7– Screw the 2 bolts and washers into the bottom fixings through the holes in the cabinet, and tighten them to the torque recommended for the chosen model (6 Nm for the RS PRO brand / 6.5 Nm for the RAWL FIXINGS brand).

Remove the shelf from the cabinet to make installation easier. (see p.16)

11

USER GUIDE PELLENC

CHARGING STATION

INSTALLATION ON A WORK SURFACE

The cabinet must be placed onto a work surface and rest against a wall. The two upper drill holes are used to fix the cabinet to the wall. For this, use bolts and screws (not supplied) to suit the type of supporting surface.

The work surface, made of a non-flammable material, must be stable and designed to support the weight of the cabinet.

POSITION OF POWER CABLE

Depending on the position of the cabinet, the qualified electrician responsible for connecting the cabinet may change the position of the charging station power cable (see p. 14).

12

USER GUIDE PELLENC

CHARGING STATION

Ê&#x161; ITEMS SUPPLIED WITH THE CHARGING STATION. BLANKING PLATE

1x

2x

CABLE GROMMET PLATE

1x

3x

4x

4x

4x

13

USER GUIDE PELLENC

CHARGING STATION

ʚ ELECTRICAL INSTALLATION

ONLY A QUALIFIED ELECTRICIAN SHOULD WORK ON THE ELECTRICAL BOX (RISK OF ELECTROCUTION) THE ELECTRICAL NETWORK MUST BE EQUIPPED WITH A 30MA DIFFERENTIAL CIRCUIT BREAKER COMPLIANT WITH ELECTRICAL SAFETY STANDARDS FOR PEOPLE, AND A C16 CIRCUIT-BREAKER WITH SECTIONING SWITCH DEVICE TO CONNECT THE CHARGING STATION.

ʚ CHANGING THE POSITION OF POWER CABLE

• • • • • • •

Remove the vertical plate to access the power cable.

Unscrew the counternut on the blanking plate to release the left hand outlet from the cabinet.

Unscrew the counternut of the gland, and remove the power cable from the right hand outlet of the cabinet.

Pass the power cable through the left hand outlet of the cabinet.

Hold the power cable in place with the gland and the counternut, and tighten it (8Nm).

Close off the right hand outlet with the blanking plate and counternut.

Refit the vertical plate.

14

USER GUIDE PELLENC

CHARGING STATION

TAKE CARE NOT TO DAMAGE THE CABLES OR COMPONENTS IN THE SPACE BEHIND THE VERTICAL PLATE WHILE YOU ARE WORKING. For connection* to the customer's power distribution box, comply the standard colour allocation: - Brown = phase - Blue = neutral - Green/yellow = earth

ʚ INSTALLATION OF CABLES

• Pass the 10 cables from the power distribution box one by one through the chosen opening, taking care not to damage them.

• Put the cable grommet in place: • partly screw up the first two fixing screws • put the cables in position one by one.

• tighten up the cable grommet and do up the 3 screws to keep it around the cables.

1x

3x

4x

4x

4x

15

USER GUIDE PELLENC

CHARGING STATION

• Fix the cable grommet to the cabinet with the 4 screws and nuts supplied.

1x

3x

4x

4x

4x

• Cover the 2nd outlet with the plate supplied.

1x

ʚ INSTALLING CHARGERS To install the chargers, the shelf has to be removed. If it is not already out, proceed as follows: • Unscrew the nuts holding the shelf in the top of the cabinet.

16

2x

USER GUIDE PELLENC

CHARGING STATION

• Remove the shelf, to make installing the chargers easier.

• Distribute the chargers on the two shelves provided for them.

Up to 10 chargers can be installed in the cabinet, including a maximum of two quick chargers.

Put any quick chargers in the centre of the shelves. These will be connected to the sockets marked in red (numbers 3 and 8).

This is the recommended configuration for a useful charging power, as permitted by the standards: - 2 x 7.6 A chargers - 4 x 3 A chargers - 4 x 2.2 A chargers

Identify pairs of cables when installing (colour or number), to make it easier to connect them to the distribution box.

• Keep around 40cm of cable free between charger and socket.

• Attach the rest of the cable to the back of the shelf using a cable grip passed through the holes provided.

17

USER GUIDE PELLENC

CHARGING STATION

• Once the chargers are in place, put the shelf back in the cabinet.

ʚ CONNECTING CHARGERS The distribution box contains: 10 power connectors (A) for chargers.

10 XLR connectors (B) for connecting the chargers to the distribution box.

10 output cables (C) to supply the batteries.

A B C

B A There is an XLR connector and an output cable to the battery for each power socket, to determine the identification and management of batteries for the Charging Station application.

2

1

WHEN CONNECTING CHARGERS TO THE DISTRIBUTION BOX, THE MATCHING CONNECTIONS TO SOCKETS MUST BE RESPECTED.

18

1

2

1

2 1

1 2

2

2

1 1

1 2

2

USER GUIDE PELLENC

CHARGING STATION

ʚ INSTALLATION OF TOUCHSCREEN TABLET. • Manually release the 4 pressure screws on the holding brackets.

• Unscrew the nuts holding the top bracket and remove it.

• Move the holding brackets until the buttons and charge connector are accessible.

• Lightly loosen the nuts holding one of the side brackets.

• Very carefully insert the tablet between brackets and door (make sure you do not scratch the tablet's screen with the upper pins).

• Put the side bracket back against the tablet and tighten its nuts.

• Put the top bracket back against the tablet and fix it in place with its nuts.

• Tighten the 4 pressure screws (not too tightly).

• Connect the tablet's charging cable to its connector.

ʚ OVERRIDE CONTROL A switch on the distribution box starts the charging station station up in override.

Chargers are then powered continually.

This mode allows the chargers to be used to recharge the batteries if the tablet is not operating.

I

O

19

USER GUIDE PELLENC

CHARGING STATION

ʚ FIRST STARTUP CHECK THE SWITCH IS NOT IN OVERRIDE POSITION. I

• • • •

Check that the cabinet is connected to the circuit-breaker.

Switch the cabinet on.

Turn the tablet on by pressing its start button for 5 seconds.

The tablet may take several minutes to start up.

• Once it is turned on, close the cabinet.

• Turn the key in the lock on the cabinet door.

• Slide the protective screen aside, to release and access the tablet’s home screen.

• Select and start up the Charging Station application.

If the display is too dark, the screen brightness can be adjusting from the tablet's settings menu, and the “automatic brightness” control disabled. (Refer to the manual for the tablet used).

20

O

USER GUIDE PELLENC

CHARGING STATION

■ USE OF THE HMI ʚ SETTINGS / CONVERSIONS MENU This menu is used to enter the data needed to calculated the numerical data in the “savings, consumption, environment” menu.

THE STATISTICS CALCULATED BY THE CHARGING STATION DEPEND ON THE DATA ENTERED

BY THE USER. THESE DATA HAVE TO BE KEPT UP TO DATE REGULARLY, SO THAT THE CALCULATIONS CORRESPOND AS CLOSELY AS POSSIBLE TO THE REAL SITUATION.

C

D1

D2

E1

E2

F

A

B

Select the Settings menu, zone A, then the Conversions tab zone B to access the above page.

Zone C Estimation of power consumption of a PELLENC portable power tool and consumption of a petrol-powered tool (mixture).

Zone D: Pricing 1- Price per kWh according to electricity supplier rates.

2- Price of a litre of fuel (mixture).

• Adjust values according to current price rates.

Zone E: CO2 emissions.

1- CO2 emissions to produce 1kWh. 2- CO2 emissions for production and consumption of 1 litre of fuel (mixture).

• Adjust values as a function of the quantity of CO2 emissions.

Zone F: Conversion rate • Select the various boxes below • Use the number keypad on screen to enter the value.

• Confirm input with the “enter” key.

21

USER GUIDE PELLENC

CHARGING STATION

ʚ DETAILS OF CALCULATIONS FOR SAVINGS MADE 1kWh battery on average corresponds to about 3.5L of fuel + oil mixture used to run a petrol-driven tool.

THE FOLLOWING CALCULATIONS GIVE EXAMPLES TAKEN FROM ESTIMATED VALUES AT THE TIME THE MANUAL WAS WRITTEN. THE STATISTICS CALCULATED BY THE CHARGING STATION DEPEND ON THE DATA ENTERED BY THE USER. THESE DATA HAVE TO BE KEPT UP TO DATE REGULARLY, SO THAT THE CALCULATIONS CORRESPOND AS CLOSELY AS POSSIBLE TO THE REAL SITUATION. CALCULATION OF AVERAGE SAVINGS MADE: The application uses a default price for fuel mixture of 1.5€ per litre.

So 1kWh consumed by a Pellenc portable power tool is the equivalent of 3.5 x 1.5 = 5.25 € fuel mix consumed to run a petroldriven tool.

In France the price of 1 kWh is 0.16 €.

For 1kWh consumed using a Pellenc power tool, the average saving compared to use of a petrol-driven tool is: 5.25 - 0.16 =5.09€.

CALCULATION OF CO2 EMISSION SAVINGS The carbon footprint of fuel mixture is 2.54kg / L of CO2.

So 1kWh consumed by a Pellenc portable power tool is the equivalent of 2.5 x 2. 54 = 8.90 kg of CO2 emitted by using a petroldriven tool.

In France production of 1kWh of electricity generates on average 0.09 kg de CO2.

For 1kWh consumed using a Pellenc power tool, the average saving in CO2 emissions compared to use of a petrol-driven tool is: 8.90 - 0.09 = 8.81 kg CO2

ʚ ECONOMY / CONSUMPTION / ENVIRONMENT MENU

Display of numerical data: - In orange: average saving using a power tool instead of a petrol-driven tool (parameters of application need to be set).

- In blue: average electrical power consumption by the charging station to recharge the batteries.

- In green: CO2 emissions avoided relative to a thermal tool Data available per day, per week, per month or per year.

22

USER GUIDE PELLENC

CHARGING STATION

Ę&#x161; BATTERY SETTINGS MENU A- Selection from battery settings menu

D

B

A

C

E

B- Selection screen, allocating actions on batteries.

C- Actions available: Stop charging Enable charging

To apply an action to one or more batteries: select the battery or batteries from zone B, then press briefly on the pictogram for the selected action (zone C).

To apply an action to all batteries: Long press on the pictogram for the chosen action (zone C)

Delay charging (see settings p21) Keep battery on charge D- Display distribution and status of batteries connected (strip visible on all screens) for the10 chargers in the cabinet.

Battery on charge

Battery 95% charged

Location empty

Battery charge completed

Battery 100% charged

Keep battery on charge

Battery charging at 25% (keep on charge when fully charged)

Charge delayed

Battery 40% charged

Battery on charge

Battery not recognised, information not available

E- Selection of charging station (when several cabinets are connected).

23

USER GUIDE PELLENC

CHARGING STATION

ʚ CHARGE TIME PARAMETER SETTINGS MENU

A

B

• From the settings menu (A) select the delayed charging time setting for batteries (B) (by default, on first use, the charging start time is set at 2am, and every day is selected).

It is possible to set hours, minutes and days of the week (if no day is selected, the delayed charge will not be enabled).

Batteries shown in orange will be automatically recharged from the time set on the selected days.

ʚ STATISTICS MENU

B

A

C A- Selection of Statistics menu B- Display statistics C- Equivalent fuel consumption D- Display period, by month or year E- Scroll through data

24

D

E

USER GUIDE PELLENC

CHARGING STATION

■ CHANGING TABLE - DATA BACK-UP If the tablet fails, contact the after-sales service

ʚ REPLACING THE TOUCHSCREEN TABLET • Disconnect the tablet.

• Unscrew the 4 pressure screws and remove at least 2 brackets to release the tablet.

• Put the new tablet in place on the door, using the fixed brackets.

Depending on the model of tablet, adjust the position of the brackets to centre the tablet and leave the on button and power socket free.

• Put all the brackets back in place, and screw up the pressure screws to hold the tablet in place.

• Connect the tablet.

ʚ DATA BACK-UP The data in the app are backed up automatically on the tablet every day.

Back-up file: Historique.db The user can save this file again elsewhere, to recover the data and transfer them to a new tablet if necessary.

The Historique.db file can be transferred by WIFI or Bluetooth, or straight onto a memory card inserted into the tablet (micro SD card not supplied).

The Historique.db can only be used by the Charging Station application.

25

USER GUIDE PELLENC

CHARGING STATION

ʚ CONNECTION BETWEEN TABLET AND CHARGING STATION

A

D

E

F

G

B C

• Select parameter settings menu (A) then customise menu (B) The connection indicator (C) on the right of the Bluetooth logo shows the connection status of the charging station: Flashing grey light: not connected, looking for peripherals Green light: connected The menu (D) shows the charging station(s) when already synchronised to the tablet. Here, no charging station is connected.

• Press + (E) to start a Bluetooth scan.

• From connections options offered, select "Pellenc BLE".

The indicator goes green when the charging station is connected.

The icon appears in the first box (H), associated with a letter (I) found at bottom right of all menus.

H I

• Repeat the search for peripherals to connect another cabinet.

Up to 5 charging stations can be connected, identified by letters A, B, C, D and E.

26

USER GUIDE PELLENC

CHARGING STATION

■ PELLENC S .A . WARRANTY AND AFTER-SALES SERVICE I.

Statutory warranty A.

Warranty against latent defects

Apart from the commercial warranty foreseen under Article II, Article 1641 of the Civil Code provides that "the seller is bound to a warranty on account of latent defects of the object sold which render it unfit for the use for which it was intended, or which would impair said use to the extent that the buyer would not have acquired it, or would only have given a lesser price for it, had he known of them".

Article 1648 of the Civil Code "The action resulting from latent defects must be brought by the purchaser within two years after the discovery of the defect. " B.

Legal warranty of conformity

Article L.217-4 of the French Consumer Code: “The seller shall deliver goods compliant with the contract and is liable for defects of compliance existing at the time of delivery.

It shall further be liable for defects of compliance resulting from packaging, assembly instructions or installation where this is its responsibility under the contract or where carried out under its responsibility Article L.217-5 of the French Consumer Code: “Goods are compliant with the contract: 1° Where they are fit for the purpose normally expected of similar goods and, where applicable: - if they correspond to the description given by the seller and are of the quality that the seller has represented to the purchaser in the form of a sample or model; - if they are of the quality that the purchaser may legitimately expect with regard to the public statements made by the seller, by the producer or by its representative, in particular in advertising or labelling; 2° Or if they have the features defined by mutual agreement between the parties or are suitable for any special requirement of the purchaser which was made known to the seller and which the latter agreed to".

Article L.217-12 of the Consumer Code "legal action resulting from lack of conformity lapses two years after delivery of the goods".

II.

Pellenc Sales warranty A.

Contents

1.

General points

In addition to legal warranties, client users benefit from the commercial warranty on PELLENC products covering the exchange and replacement of parts recognised out of use, caused by machining defects, assembly defects or material defects, whatever the cause.

The warranty forms an inseparable whole with the product sold by PELLENC. 2.

Spare Parts

The commercial warranty also covers original PELLENC spare parts, excluding labour and to the exclusion of certain parts for each product provided at delivery.

B.

Duration of the warranty

1.

General Information

PELLENC products are guaranteed under the commercial warranty as from delivery to the customer for a period of two (2) years for products connected to a PELLENC battery, and for a period of one (1) year for other PELLENC products.

2.

Spare Parts

PELLENC spare parts replaced under the product warranty are guaranteed under the commercial warranty as from delivery of he PELLENC product to the customer for a period of two (2) years for products connected to a PELLENC battery, and for a period of one (1) year for other PELLENC products.

In the case of products connected to a Pellenc battery, parts that are replaced in the under the product warranty after the 12th month of use, are covered for a period of one (1) year.

C.

Warranty exclusions

Excluded from the commercial warranty are products that have been subject to abnormal use, or were used under conditions and for purposes other than those for which they were manufactured, especially in the case of non-compliance with conditions stipulated in this user manual.

It does not apply in case of shock, fall, neglect, lack of supervision or maintenance or in case of transformation of the product. Also excluded from the warranty are products that have been subject to tampering, alteration or modification by the client user.

Wear parts and/or consumables cannot be covered by the warranty.

III.

Implementation of the commercial warranty 1.

Product commissioning and commissioning declaration

The DISTRIBUTOR undertakes to complete the computer commissioning declaration form, no later than eight days after the delivery of the property to the user customer, in order to activate the latter on the www.pellenc.com website under "warranties and training" in the "extranet" menu, using the identifier previously provided to them by PELLENC. Failing that, commissioning declaration will not be effective and implementation of the PELLENC commercial warranty will not occur. As a consequence thereof, the DISTRIBUTOR must ensure the financial burden of its intervention under the warranty without being able to pass on the cost to the client user.

The DISTRIBUTOR shall also undertake to complete the warranty card or the certificate of warranty and commissioning for self-propelled equipment provided with the product after having the client user sign and date it.

IV.

Paid after-sales service A.

General points

Malfunctions, breakdowns, breakages resulting from misuse, neglect or improper maintenance by the client user as well as malfunctions resulting from normal wear of the product are subject to the payment of after-sales service, even during the period of the legal and commercial warranty. After-sales service repairs that fall outside of the legal and commercial warranty also include maintenance, adjustments, diagnostics of all types, and cleaning without the present list being exhaustive.

B.

Wear parts and consumables

Wear parts and consumables also fall within the after-sales service.

C.

Spare Parts

Paid after-sales service also covers original PELLENC spare parts, excluding labour and outside the legal and commercial warranty period.

In case of replacement of original PELLENC spare parts in the context of after-sales service, said latter are covered by a warranty of one year as from the installation date.

27

USER GUIDE PELLENC

CHARGING STATION

■ "EU" STATEMENT OF COMPLIANCE MANUFACTURER

PELLENC SA

ADDRESS

QUARTIER NOTRE-DAME ROUTE DE CAVAILLON - CS 10047 84122 PERTUIS CEDEX (FRANCE)

PERSON/ENTITY AUTHORISED TO COMPILE THE TECHNICAL DOSSIER

PELLENC SA

ADDRESS

QUARTIER NOTRE-DAME ROUTE DE CAVAILLON - CS 10047 84122 PERTUIS CEDEX (FRANCE)

WE HEREBY DECLARE THAT THE MACHINE HEREINAFTER REFERRED TO AS: - GENERIC NAME

CHARGE MONITOR

- FUNCTION

FOR ORGANISING CHARGING OF PELLENC TOOL BATTERIES

- TRADE NAME

PELLENC CHARGING STATION

- TYPE

PELLENC CHARGING STATION

- MODEL

PELLENC CHARGING STATION

- SERIAL N°

56R00001 - 56R99999 56S00001 - 56S99999 56T00001 - 56T99999

IS IN CONFORMITY WITH THE FOLLOWING OTHER DIRECTIVES AND/OR RELEVANT PROVISIONS: - 2014/53/EU RED Directive - 2011/65/EU ROHS Directive - 1907/2006 REACH Regulation - 2012/19/EC WEEE Directive THE FOLLOWING HARMONISED EUROPEAN STANDARDS WERE USED: - EN 300 328 V2.1.1: 2016 THE FOLLOWING OTHER STANDARDS AND TECHNICAL SPECIFICATIONS HAVE BEEN USED - EN 301 489-1 V2.2.0 :2017 - EN 301 489-17 V3.2.0 :2017 - EN 60335-1 :2012 + A1C :2014+A11 :2014 - EN 60335-2-29 :2004 + A1 :2004 + A2 :2010 ISSUED IN PERTUIS, 01/12/2017 Jean-Marc GIALIS Deputy Managing Director

28

www.pellenc.com