Panel and Joinery Magazine May / June 2019

May / june 2019

Small, Powerful Multi-Directional the Combi - WR4

www.combilift.com

Work simple Work digital

Maestro smartech | Maestro suite | Maestro datalink | Maestro xplore | eye-M Maestro Digital Systems is the result of a steady commitment and big investments in R&D. A set of digital products and services that further expands SCM’s woodworking knowledge-rich DNA. A dynamic system in continuous development which promises a simple and efficient management of the Digital Factory of the future.

SCM Group UK Tel. +44 (0)115 9770044 - scmgroupuk@scmgroup.com - www.scmgroup.com

Contents Editor’s Pick

Cover Story

36-37

16

6-7

22

Must Read

12-15

8-10 2 6-7 8-10 12-15 16 18 22-23 26 28 30 34-35 36-37 38-39 40 41 42-43

Combi-PPT wins FLTA Safety Award

26 Published by:

EC Media Services 76 Victoria Avenue Westgate on Sea Kent CT8 8BH

Telephone / Fax:

+44 (0)20 8366 3331

Email:

ernie@p-j-production.com

Website:

www.p-j-production.com

Publisher:

Ernie Hollister

Designer:

Russel Goldsmith TRACE Creative Agency www.tracecreative.co.uk

Printer:

The Magazine Printing Company www.magprint.co.uk

Combilift Shows Off At Ligna SCM At Ligna With IFS “Smart & Human Factory” Homag Reveals The Future For Woodworking Production AES At Ligna

Ligna 2019 – Sanding The Swiss Way

Traditional Kitchens

Surface Appeal

Think Differently About Blum

New Armor-Coat® Hardware Range

Cookstown Panel Centre Gains Cutting Advantage

Felder Recommends Cabinet Vision to CNC Novice

Homag Opens Doors For Hazlin of Ludlow

Win With Ronseal At The Heart Of The Rugby Action

The Screw-Tite® Revolution Continues Energy-Saving DCS Retrofit For Rosebirch

Reproduction of articles: All material appearing in Panel & Joinery Production is strictly copyright, and all rights are reserved.

No part of the publication may be copied or transmitted in any form whatsoever, including photocopying without prior permission of the publishers.

Publishers note: The editorial opinions expressed in Panel & Joinery Production are not necessarily those of the publishers, who shall be under no liablity with respect to any article published herein.

Panel & Joinery Production - May / June 2019

3

Company News Combi-PPT wins FLTA Safety Award Combilift added yet another industry award to its ever

position tiller arm. This incorporates tiller and operator

growing tally when its Combi-PPT model won the Safety

offset position with the touch of a button and enables

Category of the FLTA Awards for Excellence 2019 on

excellent visibility from the side of the truck, also reducing

March 30th.

any crush risk to the operator when working in tight spaces.

According to the FLTA “the jury was impressed by the PPT’s

The Combi-PPT is a high performance pedestrian operated

large capacity and its potential to replace counterbalance

powered pallet truck, the first model of which was designed

trucks, improving safety in pedestrian areas.”

following a very specific request from a Combilift customer wanting to enhance operational safety and material flow in

Mark Whyte, Combilift’s R&D manager, accepted the

its manufacturing facilities. This proved to be so successful

“Archie” trophy from Andrea Maneti of the category sponsor

that the Combi-PPT was put into serial production last year

Trelleborg. Combilift’s MD Martin McVicar commented:

and models with capacities from 3,000kg up to 16,000kg are

“We have won a number of awards from the FLTA over the

now available.

years for innovation, design achievement, ergonomics as well as the unique Winner of Winners Gold Award in 2012.

Its design and features such as AC powered drive, steer and

In the 25th year of the awards we are proud to have been

lifting technology enable very large and bulky products to

recognised for our ongoing commitment to safer materials

be manoeuvred with ease in confined spaces without the

handing with the introduction of the Combi-PPT into our

use of a ride-on forklift. Above all, it can also do this whilst

product range.”

ensuring maximum safety when working in areas where other personnel may be present, in busy production plants for example, thanks to Combilift’s unique, patented multi-

4

Panel & Joinery Production - May / June 2019

www.combilift.com

@

Hall 11, Stand D44 27th - 31st May 2019

See Us At LIGNA!

VEGA For Door & Furniture Production

ALPHA Beamsaw

EXTREME Nesting Line

VEGA 5 Axis CNC

NOVA Nesting Machine

www.aesgroup.com.tr AES HEADQUARTERS

Nosab Şeftali Cd. 118 Sk. No: 4 Nilüfer / Bursa / TÜRKİYE Phone +90 224 443 33 90 Email : info@aesgroup.com.tr

AES EUROPE

Begijnhofstraat 47 2870 Puurs /BELGIUM +32 3 897 97 97 +32 3 889 89 78 europe@aesgroup.com.tr

AES AMERICA

2800 Lively Blvd. Elk Groove Village IL60007 USA +1 847 879 11 46 +1 847 430 48 03 usa@aesgroup.com.tr

UK Sales & Support

Unit 4, Falcon Place, Lancashire L40 8RT +44 1704 893109 Info@ukwoodworkingmachinery.co.uk

Company News AXYZ International Announces Major Rebranding Initiative Leading supplier of high-performance CNC routing and

routing systems where these are considered to be more

cutting solutions, AXYZ International has announced a

appropriate. The name of the company and its corporate

major rebranding and restructuring initiative.

identity may have changed but its values remain the same.”

Supporting the rebranding programme is a visually stronger

It embraces a change in company name, a new corporate

and more distinctive three-dimensional logo and tagline,

identity and a realigned marketing strategy. Implemented by

rendered in a dark blue and light blue combination. This

the parent company in Canada, the rebranding programme

will give AXYZ Automation Group a new, stronger and

follows acquisition of the US-based waterjet cutting

readily identifiable corporate identity within the industries it

systems company WARDJet in 2018. This signalled AXYZ

operates and those it plans to develop in the future.

International’s entry into the waterjet cutting sector and precipitated the decision to carry out a total rebranding

In welcoming the rebrand, UK Managing Director Mark

programme.

Sweeney commented: “These changes will enhance the strong presence that the AXYZ brand has built in the UK and

In consequence, AXYZ International is now trading as AXYZ

Ireland over the years and assist the shared objectives of

Automation Group, a name that recalls the company’s

developing new market opportunities for future business

inception in the 1990’s when it was known as AXYZ

growth and prosperity.” Endorsing these sentiments, Vice

Automation. More significantly, however, the rebrand serves

President (Market Development) Robert Marshall added:

as an indication of how the company has evolved over the

“The rebrand will help both existing and potential new

years, with a much expanded product offering, greater

customers to better understand and identify with what

market diversification and a high receptivity of the AXYZ

the AXYZ Automation Group now represents and how

brand by the many industries it supports.

it will continue to support their business objectives by enabling access to a much wider product offering and new

President of AXYZ Automation Group, Luke HansenMacdonald commented: “The rebrand reflects our commitment to realigning manufacturing output in line with the demand for increased automation and the need to provide alternative solutions to traditional CNC

T: 01952 291600 www.axyz.co.uk

6

Panel & Joinery Production - May / June 2019

technologies.”

Ligna

The Felder Group At Ligna 2019 Discover the technologies of tomorrow at the world’s most important woodworking trade fair and experience the brand new innovations of Felder and Format-4 in Hall 13. You can expect pure woodworking on 2,700 m²: More than 100 machines, including all novelties, exciting live demos and, of course, competent experts, who will present innovative technologies to you and discover individual ways to perfect woodworking.

•

New beam saws and panel saws, such as the Format-4 kappa 590 for example - the sliding table saw for angle cuts in all positions with the double pivoting device of 92°.

•

Innovative CNC machines and productivity technologies - console, extraction and workpiece positioning with

•

Edge banders for all levels of investment, in every performance class, advantEdge – affordable zero-joint technology for all businesses!

•

Material handling and warehouse technologies that increase productivity

•

And a groundbreaking WORLD DEBUT with LIVE-DEMO at the LIGNA:

•

PCS – Preventive Contact System, Preventive Contact System, the revolutionary safety technology for panel saws. Creating absolutely no damage, ready for use again after a safety release at the push of a button.

The FELDER GROUP in Hall 13, your partner for perfect woodworking.

augmented reality glasses. And the new CNC machining centre profit H80 - the answer to smart furniture production - cutting, drilling, milling, polishing •

Our software solutions, revolutionary different,

http://fg.am/pcs-eng

profitable for all sizes of business!

Panel & Joinery Production - May / June 2019

7

Ligna Combilift Shows Off At Ligna Outdoor Area M61 and Hall 13, Stand G25 Combilift, the Irish specialist manufacturer of materials

Combilift continues to add to its range of electric models

handling solutions, will have plenty to show at Ligna

and this is evident at Ligna - around half of the exhibits are

on its extensive stand at the heart of the outdoor area,

electric powered and include a Combi-ST stand on truck, the

as well as on a stand in Hall 13. The company’s product

Combi-WR4 multidirectional pedestrian stacker, a Combi-

range, which encompasses small pedestrian stackers,

CBE counterbalance design 4-way truck and the Aisle-Master

multidirectional forklifts and large Straddle Carriers,

VNA articulated forklift. The majority of electric products

will be well represented at this year’s event.

from other manufacturers are designed for indoor use only but Combilift has answered the market demand for

Around 18 models will be on show, all of which have been

more versatile forklifts by incorporating rubber tyres into

designed for the safe, space saving and productive handling

its electric range to enable them to offer good traction on

of the various loads that the timber sector needs to lift,

a variety of surfaces so that they can transition easily from

transport and store. Sawmills, furniture manufacturers,

inside to outdoors.

timber suppliers and joineries for example can all benefit from Combilift’s innovative products to keep things moving

C-Series models on display include the C5000XL, a robust

on the premises.

diesel powered truck with high ground clearance, large operator cab and a host of features which cope easily with

Centrepiece on the outdoor stand will no doubt be the

harsh operating environments and tough ground surfaces.

Combi-SC Straddle Carrier. This imposing machine, which is

Combilift aims to entertain as well as inform at Ligna, so

available with lift capacities of up to 100t, handles oversized

the usual line up of dancing forklifts and Guinness will be

loads such as modular buildings and containers. It has a

available for visitors to enjoy.

very light footprint in spite of its size and is a cost effective alternative for heavy handling forklifts and cranes and works on poor terrain without the need for costly ground reinforcement.

8

Panel & Joinery Production - May / June 2019

www.combilift.com

Ligna

It Can Be Safer On Foot Known for its innovative approach to materials handling, Combilift first introduced pedestrian operated models to its range a few years ago, in line with a growing preference of many companies to use these whenever possible for safety reasons. These now include the Combi-WR reach truck and its multidirectional counterpart the CombiWR4, the Combi-CS counterbalance stacker, and most recently the Combi-PPT powered pallet truck. Working at slower speeds than ride-on models enables a heightened awareness of operators compared to when they are in a cab of a motorised truck. This enhances health and safety procedures in areas where pedestrians may be present – in busy production plants for example. A key feature of all these models is the internationally patented multi-position tiller arm, which can be turned to the left or right of the unit, allowing the operator to remain at the side of the machine rather than at the rear as is the case with other pedestrian brands. This eliminates the risk of operators being trapped between the back of the machine and racking. It also allows for full visibility of the load, the forks and the surroundings. www.combilift.com

Panel & Joinery Production - May / June 2019

9

Ligna

SCM At Ligna 2019 With Its “Smart&Human Factory” At the Hannover event, a cutting-edge production model with highly flexible and modular automation and man-robot interaction systems SCM, the world leader in the field of secondary woodworking technologies, is gearing up for the next edition of Ligna (Hannover, 27-31 May 2019), having achieved a double-digit growth rate in the last two years which propelled the group over the 700 million turnover target at the end of 2018, with a technological range of products increasingly in line with Industry 4.0 requirements.

After launching its “Lean Cell 4.0” for highly automated industrial production two years ago, from this same Hannover event, SCM now goes further with its breakthrough concept of Smart Manufacturing.

From its over 4,000 square metres’ booth in Hall 13, the Italian woodworking giant will present its “Smart&Human Factory”: a cutting-edge production model based on digital and automation systems and allowing for advanced man-machine interaction and 360-degree control over the entire production flow. A model based on highly innovative, flexible, modular and easily reconfigurable systems, designed

10

Panel & Joinery Production - May / June 2019

to respond in an increasingly effective and fast way to the challenges of mass customisation. A new “smart and human” factory - also making progress in terms of work flow: thanks to the integration of robotics, low-added value and repetitive human tasks are now minimised.

“Ligna 2019 will be one of the key international events for SCM - traditionally a historic and reliable partner for the entire woodworking industry”, explains the SCM Division Director, Luigi De Vito. We will showcase top-level technological innovation, designed to support more and more companies in their business and help them meet new Industry 4.0 requirements. The current, new production trends, which will be the focus of the next edition of Ligna, are expected to widen the gap between more and less intensively automated companies. By offering a new model of interaction between machines and industrial and collaborative robotics, ground-level logistic handling and software, SCM will have as its mission to help partner companies work toward achievable, successful and smart goals.”

“You Will Never Work Alone” The claim “You will never work alone” effectively

Ligna summarises the goal of the new SCM product range: to supply a “user-friendly” wood panel processing automation system, with the option to reconfigure the production process whenever this is necessary, to quickly process increasingly smaller “order to production” batches.

After previewing a working application of its “Smart&Human Factory” at the Open House 2019 event on 31 January 31 through to 2 February, which drew crowds to the company’s Technology Center of Rimini (Italy), SCM will showcase an even richer version at the next Ligna. An automated system for all the phases of furniture production will be presented: from furniture designing to the generation of machine programs and from panel processing to cabinet assembling.

The process aims at optimising as much as possible panel cutting, edgebanding and drilling operations, so as to reduce waste, rejects and retooling requirements during product changeovers, to then reassemble orders back together at the end of the process and delaying customisation until this stage.

With this system, low-added value and repetitive human tasks are minimised, thanks to the use of KUKA industrial anthropomorphic robots, assisted by collaborative Universal Robots in the final process stages (assembly, hardware insertion, glue dispensing and surface finishing) and ensuring totally safe conditions without the use of enclosures. Finally, process logistics are made flexible thanks to the use of MiR intelligent autonomous self-driving shuttles.

The entire process will be managed and supervised by the Maestro Watch supervision software - monitoring the state of each of the products being machined throughout the process, and by the IoT Maestro Connect system - which collects and analyses SCM technology data, ensuring on the one hand full control over the production flow and, on the other, the implementation of smart predictive maintenance models.

new technologies applied to the wide range of SCM machining options (cutting, edgebanding, boring, milling, nesting-milling and edge machining) for both panels and solid wood. In addition, the system features are enhanced thanks to the introduction of a new sensor kit able to detect the changes in crucial machine components. This evolved data collection and analysis system originating from SCM machinery, combined with Maestro Smartech augmented reality visual technology, aims to offer the client excellent product flow control, achieve rapid, intelligent maintenance and effective planning of a spare parts strategy.

The new “upgrades” for Maestro Suite software will be featured. Maestro Active (special mention at the last German Design Award) is the new HMI application which, combined with the touch eye-M control panel, has revolutionised the human-machine interface. The project will be launched at Ligna on machining centres, panel boring devices, panel saws and edge banders offering all these technologies a single environment for use and a common graphic interface, making the operator’s work notably easier, and providing a single structure of areas and functions.

The new “upgrades” for Maestro Suite software will also be showcased. In addition to the latest version of the supervision software for our Maestro Watch integrated cell systems, the Maestro CNC 2019 version will be released with major updates for CNC machining centres and drilling machines. User-friendly, intuitive software, which, most importantly, can be integrated and interfaced with other systems used by customers.

Solid wood sees the arrival of hypsos, the anticipated 5 axes machining centre with integrated cabin, designed for interior decorators and the three-dimensional processing of elements with a complex shape or large dimensions.

News From The “Digital” Frontier At Ligna 2019, SCM will add to its digital range, by combining digital technologies with high added value, specifically targeted services. The Digital Hub, the innovation control centre at the core of the exhibition booth, will display all the latest products.

To meet the needs of 4.0 industrial production, the “Maestro Connect “ IoT platform will be extended to Panel & Joinery Production - May / June 2019

11

Ligna The best of gabbiani technology will take centre stage for sizing, with new devices aimed at processing delicate panels, in line with SCM’s keen focus on surface treatment. The gabbiani sizing machines on display at the trade fair will include the exclusive Flexstore HP warehouse management system, characterised by the Saw-Set device to make tool settings even faster and more exact.

The accord 42 fx machining centre with dual operator unit combined with 3 and 5 axes, ideal for the production of windows, doors and stairs, is also being demonstrated.

As far as edgebanding is concerned, there is great anticipation surrounding stefanicell, the new generation of cells for “batch-1” processing, with high-tech solutions, even with minimal investment, and the new pickback bridge system for the automatic return of panels, that guarantees simple, “just in time” production management.

Timber construction will see the world preview of Oikos X, the new machining centre, specifically designed to machine structural elements, X-lam/CLT wall panels, fitted with the new 6-axis machining head unit that allows any machining work to be carried out on every side of the element from a single position and in reduced spaces.

The Stefani range will present a new generation rounding unit with servo-assisted technology, designed to work even the most delicate panels with surprising continuity and quality. For the olimpic range, the new glue tank is worth pointing out, with technological solutions for a perfect line of glue and a new glue scraper to process panels coming from the nesting cycle.

New entries also for double ended squaring and shaping machines: at the trade fair you will get a chance to see the celaschi p40 in operation, fitted with “electronic spindle, an innovative solution which will soon be standard fitted on the whole range. Its aim is to continuously improve operating reliability and efficiency especially in more challenging tasks like the processing of particularly abrasive materials and the production of large sized pieces.

The solution put forward for assembly is the semiautomatic action clamp, aimed at assembled furniture manufacturers and a valid aid in assembling each part of the furniture with precision and quality. For the first time ever, the clamp will be presented with semiautomatic loading and unloading ergonomic systems, served by an input translation shuttle and 90° output flipper to make the subsequent stages of the work easier.

Other important “new entries” in panel technologies, starting with the new range of CNC Morbidelli x200 and x400 machining centres, that applies the best 5 axes “All-in-one” technology performance to nesting processing, in line with market demands increasingly focused on “batch-1” production and which, therefore, need to combine high speed and maximum flexibility in panel cutting outlines.

There are numerous “new entries” for carpentry machines too, the key ones being dictated by automation. To mention but a few, px 350i is the new circular saw with mobile cart and tilting blade up to 46°, that can house blades up to 350 mm (up to 300 mm using the engraver function). This ensures maximum safety while working, with reduced bulk and guarantees a perfect hold on the panel thanks to the exclusive presser. The “Ready” control positioned on the wall unit, guarantees motorised and programmed movement of the blade tilt and powered and programmable rear stop, guaranteeing a rapid, exact positioning and reducing operator movement.

On show for the first time at Ligna 2019 is also the new morbidelli cx 220 drilling centre a focal point in the compact categories. Providing even better performance in terms of finishing quality, precision and productivity, and morbidelli ux 200d, fitted with the exclusive dual variable-axis broaches and the new Clamex operating units for joints.

12

Panel & Joinery Production - May / June 2019

www.scmgroup.com

@

Hall 16, Stand D19/1 27th - 31st May 2019

See Us At LIGNA!

Brilliant-2 1350-REd-L

Technic-Brush 1350-RRBkCd-L2

Premium-2 1100 RP

Brilliant-2 1350-CdH-L

Technic-Brush 3-650

www.kundig.com KUNDIG HEADQUARTERS Hansruedi Kündig +41 43 477 30 00

KUNDIG UK

Carl O'Meara +44 84 58 33 05 65 +44 796 71 10 541 carl.o.meara@kundig.com

KUNDIG GERMANY Thomas Tenberg +49 362 18 78 61 11 +49 171 77 02 197 t.tenberg@kundig.de

KUNDIG AUSTRIA Stefan A. Schöttli +43 660 56 22 086 +41 79 649 98 50 st.schoettli@kundig.com

KUNDIG FRANCE

Anne Laurence Quadranti +41 32 93 61 162 +33 6 74 79 15 79 al.quadranti@kundig.com

Ligna HOMAG reveals the future for woodworking production at LIGNA 2019 This May (27 -31st), at the LIGNA 2019 trade fair, HOMAG will once again lead the field with ground breaking machinery, software and technical innovations for wood processing.

Throughout the 5000 m2 floor space in Halls 14 and 13 (Weinmann timber frame house construction), there will be a vast range of products on demonstration for small woodworking shops and large industrial companies alike.

At the heart of the HOMAG stand is the Innovation Centre, where this year, visitors can take a journey through time in the furniture manufacturing industry. The exhibit includes outstanding milestones and technical innovations from the history of the wood processing industry.

Towards the end of the exhibit, the focus turns to the future: What will the furniture of the future (‘Smart Furniture’) look like? What challenges will we face? How can HOMAG help its customers meet these challenges?

A glimpse into the future In addition to unusual ideas, HOMAG will present real-world examples – futuristic ideas bought into reality. A significant influence on this exhibit has been the collaborative research project between the renowned Rosenheim University of Applied Sciences and HOMAG. The research was based on Digitalisation: How will the production processes of woodworking shops look in the future? The study examined how woodworking shops can find the optimal solution to take their production to the next level.

Known as the proto_lab project (production tomorrow laboratory), it has helped to develop ideas including concepts for individual machine modules, hardware and apps that can communicate with each other.

One of the key focus points was the ‘production cell of the future.’

HOMAG has taken the best ideas to date, developed them further, and is now turning those ideas into reality as marketable products.

As a form of field testing, many of the prototypes are already being used in live production situations by customers, with feedback flowing directly back into HOMAG’s product development.

HOMAG MOULDTEQ M-300 for planing and moulding HOMAG – edging ahead This year’s show will see major advancements in edge banding from HOMAG. There will be several machine premieres from the new entry-level EDGETEQ S-240 up to the EDGETEQ S-500 and S-800 profiLine models. All the machines are equipped with the new powerTouch control system and are ‘tapio-ready’.

The EDGETEQ S-240 model 1240 is a completely new machine.

It offers a high level of automation resulting in significant simplification and time saving during setup. The model uses the QA65N overhead glue application system with easy cleaning and emptying. The special coating of the system means that all types of glue can be processed, including PUR. There’ll be two EDGETEQ S-500 machines on show with different units and feed speeds. The 20 m/min model features a new AG12 Basic gluing unit to process PUR glue. Whilst in the post-processing area, special units (available for the first time in this series) are used: the MS40 multi-level routing unit, the MF60 Servotrim multi-function profile routing unit and the MZ40 multi-level scraper unit.

HOMAG to display an impressive array of CNC technology

HOMAG LAMTEQ F-200 with new handling concept

14

Panel & Joinery Production - May / June 2019

The second EDGETEQ S-500 will feature a feed speed of 25 m/min and offer three edge banding procedures – EVA, PUR and airTec. This means that inexpensive EVA can be used on numerous body components, while PUR can be used where there is a requirement for temperature or moisture resistant properties. Finally, when the look is particularly important – for example, on cabinet fronts – the airTec zero joint technology is available.

The new, one-sided EDGETEQ S-800 profiLine series is a powerful machine, ideal for special order based production. It works

Ligna

SAWTEQ B-300 fed by STORETEQ system

independently of the width and is therefore very flexible. For the highest quality edging, a laserTec unit has been installed to deliver zero joints.

With a feed speed of up to 35 m/min, the new workpiece supply system enables high capacities to be achieved. Parallel precise cutting is not necessary as this is done by the dimensioning unit.

High productivity is also ensured by the ‘gap setup’ control function.

This calculates the gap required for the changeover and blocks the machine infeed for the required length of time, eliminating extended periods of downtime.

To offer greater investment security, the machine has been ‘future proofed’ with a new drilling grid which makes it easier and more flexible to retrofit the machines with units. Less installation space is also required because the outfeed switch cabinet is now integrated in the machine.

In addition to these models, LIGNA will see premieres for the EDGETEQ S-200 model 1130 FC and the S-300 model 1440 E. Alongside these will be an improved EDGETEQ S-380 profiLine model with a LOOPTEQ return system.

The new robot saws provide highly efficient batch size 1 production achieving up to 800 parts per shift with extremely low error rates and low costs per part. Operated in either the unmanned mode or manually for cutting books or thin panels, for example, these new saws can also utilise HOMAG’s intelliDivide system which provides cutting pattern optimisation on demand via software-as-a-service (SaaS).

With zero investment cost, intelliDivide can be used anywhere, anytime via the tapio cloud – on a desktop or any mobile device with internet access including iOS, Android, Windows or Mac OS. Optimisation starts automatically after data has been uploaded. The software always calculates a choice of multiple alternatives and, with the results requiring no adjustments, they are immediately ready for the machine.

Panel sizing – a new generation of robot saws The HOMAG SAWTEQ B-300 flexTec and B-400 flexTec beam saws represent an entirely new generation of robot saws. This is because, in addition to automated robot operation, manual use of the saws is still possible, making them extremely versatile.

These new models, based on proven technology, can be used in combination with other machines to create automated production cells. In the manual operation mode, the saws can also cut books of panels, further increasing their flexibility.

Automated batch size 1 cutting processes Thanks to the robot, the new cutting cell can operate unmanned over longer periods, freeing up skilled operators for other tasks. The saws can be fed by a variety of tables including a specially designed side table, a number of lifting tables, an HBX 150 single axis portal or a high-performance connection to a horizontal storage system.

Explore HOMAG’S digital products Precision and efficiency in cutting processes do not have to cost a fortune. The SAWTEQ B-130, HOMAG’s smallest panel dividing saw, clearly demonstrates this. Along with the SAWTEQ B-200 featuring a lifting table, it will be on show at LIGNA.

Panel & Joinery Production - May / June 2019

15

The HOMAG SAWTEQ B-300 and B-400 flex-Tec beam saws – new generation of robot saws

The new HOMAG saws are ‘tapio-ready’ so users no longer need to enter any machine parameters. They can apply the optimisation results with one simple mouse click.

The latest in CNC technology There’s a wave of innovative CNC solutions being shown at LIGNA for the first time including the new CENTATEQ P-210 series. These gantry-style models feature a double-sided drive, a separate drilling gear arrangement and milling spindle with two independent Z-axes, a dynamic field division for the parallel mode and a 2-circle vacuum system with double-lip technology for step-less adjustment of the clamping devices.

There’s a choice between 3, 4 and 5-axis heads, and the P-210 can be equipped with up to 24 tool changing stations and a maximum of 21 vertical and 10 horizontal drilling spindles with patented spindle clamping.

HOMAG product manager, Friedhelm Rempp concludes: “We were looking for a good balance between space, performance, handling and flexibility for the new CENTATEQ P-210. And we are of the opinion that we have absolutely found them. “ PowerEdge Pro Duo – perfect edge quality for CNC edge gluing HOMAG engineers have been working on a completely new unit for edge banding on CNC machines. The result is the powerEdge Pro Duo which offers defined and controllable parameters at each point along the contour. Quality-defining parameters such as pressure, temperature and speed can be easily traded via an intelligent controller. The result: perfect edge quality every time.

CENTATEQ T-300 Series – Double table CNC Essentially, the new CENTATEQ T-300 (with 3, 4 or 5-axis technology) consists of two CNC machines featuring a grid table with one control. It has a footprint of just 64 m2 and features two moveable tables, two milling spindles, two fully equipped drilling gears and is combined with the latest safety and operating technology.

16

Panel & Joinery Production - May / June 2019

Overall, the user has a working area of 1550 x 6400 mm available.

Both tables can be used individually with a dimension of 1550 x 3150 mm each. In parallel operation, for example, fronts can be processed on the left table and carcass parts on the right.

More CNC developments HOMAG will also be demonstrating the CENTATEQ N-600 nesting machine with the Cabineo drilling unit and a new Cabineo feeding system; the DRILLTEQ V Series linked to a robot for an automated entry level CNC, alongside the DRILLTEQ D-500 which can now also be used for milling as well as horizontal drilling and dowelling.

Surface finishing solutions from HOMAG Continuing its drive for high performance finishing solutions, HOMAG will be demonstrating a broad range of machines. The collection includes models for surface and profile spray coating, sanding machines in different performance classes, solid wood profiling and the latest developments in the field of lamination.

HOMAG has offered wet-coating technologies for the surface coating of furniture for some time. The current product range, however, stemmed from HOMAG’s partnership with the world-famous painting system specialist, Makor. At LIGNA, HOMAG will present a broader range including spray coating solutions from trade to industrial applications.

There will be solutions for spray coating flat workpieces, strips, and window and profile parts. Models with an oscillating spray arm for simple workpiece contours or spraying robots for complex 3D part geometries will also be demonstrated. In short, everything you need will be on display, whether it’s an individual machine or a complete system with all the handling components and a drying system.

Planing and moulding of solid wood parts In 2017, HOMAG entered the moulder market with its first range of planing machines. Customers can choose from machines designed

Ligna

The EDGETEQ S-800 powerline will premier at LIGNA for the four-sided planing of window scantlings, floorboards or the profiling of non-standard furniture components and the like.

The MOULDTEQ M-300 planing machine offers a solution that combines the latest technology with a solid cast iron machine construction, delivering a high level of precision. Its variable feed and adjustable spindle speeds make it very flexible.

It also has smooth power transmission, as each spindle is driven by its own motor. In terms of operation, that couldn’t be easier as it utilises the intuitive HOMAG powerTouch user interface.

Sanding and laminating for quality finishes For decades, HOMAG has been revered for its powerful wide-belt sanding machines. At LIGNA, visitors will be able to see a complete range of SANDTEQ sanding machines in action, along with the new graphical user guidance arrangement, the powerTouch control system.

Completing the surface finishing story is the LAMTEQ F-200 with a new handling concept. This innovative handling concept requires fewer personnel for operation and it also removes the need for physically demanding lifting, carrying and flipping of unwieldy panels.

This partly-automated handling solution consists of a vacuumsuction traverse at the infeed, an automatic panel turner behind the system and a stack return feed system.

All this makes it possible for one person to handle all the workpiece transport. If another colleague applies the coating materials, the laminating plant can be safely and easily operated by just two people.

The optimised parts flow increases the plant’s productivity delivering a quick return on investment.

Invest time for the future Simon Brooks, managing director at HOMAG UK concludes: “The hallmark of the HOMAG stand at LIGNA has always been innovation, and at this year’s show it will be taken to a completely new level.

“The research project with the Rosenheim University of Applied Sciences has provided a springboard for new ideas and concepts which are taking shape in real-life scenarios. There will be many more exciting developments emerging in the near future, advancements that will benefit small workshops, midsized and industrial manufacturers alike.

“If you want to remain competitive in your business, I would highly recommend that you invest time to visit LIGNA 2019. The show will provide an ideal opportunity to evaluate the digital transformation that is sure to drive our industry for the foreseeable future. “ T: 01332 856424 E: info-uk@homag.com www.homag.com

The latest advances in CNC technology will be demonstrated at LIGNA

Panel & Joinery Production - May / June 2019

17

Ligna AES At Ligna 2019 For anyone serious about CNC, a visit to the AES stand in Hall 11, stand D44 will certainly be an eye opener.

head for those looking for an ‘all rounder’ for both furniture and joinery production.

Perhaps lesser known in the UK, AES are a global manufacturer of one of the largest ranges of CNC machinery available and stick to the golden rules of heavy engineering and the use of only quality branded components during the construction process. All machines are also equipped with industry leading Alphacam CAD/CAM software.

Completing the AES display is the all new AES Alpha beamsaw of which there are several models available giving different cutting heights and available with optional lift table and automatic labelling.

Making it’s debut at Ligna will be the new AES Nova Super nesting machine, which is available with various bed sizes and has a rapid positioning speed of 70m/min. These machines are equipped with a powerful 9Kw HSD router head and have a linear tool changer as standard. The Nova series of CNC machines are the starting point of the AES industrial nesting machines. This will be accompanied by an example of one of their heavy duty fully automatic nesting lines with lift table, automatic bed cleaning, automatic workpiece removal and side mounted 12 position rotary tool changer. All the AES nesting machines are available with a host of options including various vacuum options, face drilling, vacuum pods to allow end drilling to name a few.

For manufacturers of staircases, fire doors and bespoke furniture there will be the AES Vega 5X on demonstration.

This 5 axis machine has a liquid cooled HSD ‘infinity’ router head, which allows seamless machining of complex curved components. This versatile machine comes complete with the powerful Alphacam Ultimate software.

T: 01704 893109 www.ukwoodworkingmachinery.co.uk

The AES Vega 5x – 5 axis CNC router

For furniture production there will be the Sirius through feed drilling machine having 10 x vertical drills, can drill to all 4 sides, has a grooving saw and option of a router head. Also on display will be an example of the AES Vega pod and rail style machine which has the option of a horizontal router

The new AES Nova Super CNC nesting machine

The AES Extreme 1325 CNC machining centre

18

Panel & Joinery Production - May / June 2019

Ligna AL-KO: New Innovations To Launch At Ligna Dust extraction and air quality specialist, AL-KO THERM GMBH, will be displaying its comprehensive range of dust extraction systems and filter equipment at Europe’s largest woodworking machinery and tools exhibition, Ligna, in Hall 12, Stand D15.

new and existing customers on our product range, how our designs meet the new regulations – including the need for spark detection systems in ducting systems which our 250 unit will show - and the steps we’re taking to create systems that can future-proof your business. We’re also really excited to be launching our brand new solution for extracting welding fumes and will be presenting our innovative contactless filling level sensor, suitable for ATEX-zone 21. It’s an ultrasonic sensor and as I understand, we are the only ones in the world to have this item certified. It’s a ‘must see’ at the show.”

The German manufacturer, whose products are exclusively available from TM Machinery in the UK, will present new and existing product ranges on its 105m² stand. AL-KO will show an open PROFI-JET stationary unit, offering visitors a unique opportunity to see the workings of the system for themselves, and a wide range of POWER UNIT mobile extraction systems differing in size, filter type and extraction capacities. AL-KO’s stand will also showcase several new products that will be making their world debut at the fiveday show. New innovations include the first contactless filling level sensor suitable for ATEX-zone 21 and a brand new extraction unit, based on the POWER UNIT program, designed to remove welding fumes and other industrial dusts.

Matthias Schalast, Area Sales Manager at AL-KO THERM Keen to find out more?

GMBH adds, “The new European Regulation EN 16770 Visit AL-KO THERM GMBH at has finally been published. All our mobile devices are Ligna from the 27th-31st May manufactured according to this rule and have been for 2019 in Hall 12, Stand D15. several years. For us, Ligna 2019 will be about educating

T: 0116 271 7155 www.tmmachinery.co.uk TM Machinery on LinkedIn @TM_Machinery on Twitter

COMPLEX FORMS NEED STRAIGHTFORWARD SOLUTIONS: VOLLMER

To shape the future you will need forward-looking PCD tools – and intelligent solutions for their production, processing and maintenance. VOLLMER supports you: with innovative PCD sharpening and eroding machines, economical automation options and strong services. For the highest flexibility, efficiency and quality. The future takes shape: with VOLLMER. VGrind 360

VPulse 500

www.vollmer-group.com VOLLMER UK LTD. // Nottingham NG10 5BP // +44 115 9491040 // info-uk@vollmer-group.com

Panel & Joinery Production - May / June 2019

19

Ligna Ligna 2019 – Sanding The Swiss Way At Ligna 2019, Kundig will have on display an exciting and diverse range of wide belt and edge sanding machines to cater for the many aspects of both solid wood and panel based production.

Of particular interest to many users who produce 5 piece doors or suffer from cross grain scratch marks will be the an example of the Kundig Brilliant fitted with calibration rollers, electronic segmental pad and also the Kundig oscillating cup brush system which can be used to ‘soften’ the edges of frames or kitchen doors as well as sanding into profiled surfaces both before and after sealer is applied.

Also, on display will be several machines fitted with structure brush options, which is a must have item for those looking to generate a rustic style finish. One of the machines on display is a top and bottom sander with structure brushes to the top and calibration rollers to the bottom. The structure brush can be fitted to any of the wide belt sanders once again expanding the number of possible finishes that can be achieved on a Kundig sander.

Examples of the ever popular and standard style machines from the Premium range for solid wood and veneer sanding will also be shown. Also, on display will be further examples of the Brilliant machines showing just how easy it is to go from sanding solid wood to veneer to lacquer. All this whilst giving a perfect surface free from oscillation marks.

Complementing the wide belt sanders will be examples of the Uniq double sided edge sanding machines suitable for solid wood and veneered edges. The Uniq is also available in ‘L’ version which has additional equipment including double belt feed system, variable speed control to the abrasive and automatic cleaners for the abrasive. The action-controlled pad is designed to protect the corners when sanding /de nibbing sealed edges typically required for MDF painted kitchen doors.

For further information about the products available from Kundig, contact Carl on 0845 833 0565 or why not arrange to meet us at Ligna Hall 16 on stand no D19.

www.kundig.com

Kundig Technic-Brush 1350

The Kundig Technic Brush-3 Kundig RK Technic Vmax 08

20

Panel & Joinery Production - May / June 2019

Ligna ‘Vertical 4.0’ – Striebig Scores With Cutting Optimisation Ligna: Hall 12, Stand B40 Swiss vertical panel saw specialist, Striebig will be showcasing its innovative ‘Vertical 4.0 Solutions’ at Europe’s biggest woodworking machinery and tools trade fair, Ligna, this May in Hall 12, stand B40.

Whether you’re looking to optimise your work processes, lessen waste or maintain a consistent and accurate flow of data from preparation through to sawing, Striebig has a solution. The company will be demonstrating its new and innovative vertical cutto-size technology solutions – including its first ever retro-fittable software package - at the five-day event in Hannover.

Visitors will be able to experience Striebig’s retro-fittable panel optimisation programme, OptiDivide on its 20m x 11m stand. OptiDivide allows existing Striebig vertical panel saw users to benefit from the intelligent software solution.

Including an integrated 12” touchscreen computer, fully installed with the latest optimisation software, a WLAN network connection and a label printer, OptiDivide can quickly and efficiently calculate the most effective cutting strategy for each panel, maximising your time and substantially reducing material waste. The system can also be connected to the Wi-Fi, allowing panel sizes to be sent to the machine quickly, reducing errors on even the most challenging of panels or during strip cutting work.

WLAN). Both products guarantee visualisation and operator guidance using the saw’s 12” touchscreen computer and label printing from a printer that is mounted on the saw.

Matt Pearce, Managing Director of Striebig’s exclusive UK distributor, TM Machinery adds, “These flexible software solutions are leading the way in vertical panel saw cutting optimisation in Europe. The technology has already been successfully integrated into Striebig’s top-of-the-range ‘4D’ model for five years but its retro-fittable OptiDivide software can now benefit every Striebig user, regardless of the make or model. With the introduction of the new BaseCut and ExpertCut for the current ‘Control’ model, Striebig now covers all available machine types with a cutting optimisation solution.”

Keen to find out more?

Visit Striebig at Ligna from the 27th-31st May 2019 in Hall 12, Stand B40.

T: 0116 271 7155 www.tmmachinery.co.uk TM Machinery on LinkedIn @TM_Machinery on Twitter

The introduction of BaseCut CON and ExpertCut CON, which are specially tailored to the new ‘Control’ model, provide even more options for Striebig users. For base cuts and expert cuts, the ‘Control’ is equipped with an EPS.x electronic positioning system and ASP automatic saw beam positioning as standard, but the systems are differentiated by the scope of the respective software package.

ExpertCut is the ideal system for ‘Vertical 4.0’. The software is installed on the user’s workstation and records for cutting optimisation are imported from standard market ERP, CAD systems or CSV-format Excel files. The user can also process and manage orders, materials and part lists using the same software and transfer fully optimised cutting plans directly to the saw through the network connection (LAN and

Panel & Joinery Production - May / June 2019

21

Edgings

Edgings Matching The New Pfleiderer Decors Pfleiderer, one of Europe’s leading wood-based material manufacturers, has extended its range and presented the latest additions at the German trade exhibition “Bau”.

In 2019, there are around 34 new decors, which extend the company’s portfolio offered worldwide. As a longestablished partner of Pfleiderer, Ostermann supplies the matching edgings.

Among the new decors, you will find cutting-edge reproductions of trend materials, such as concrete, metal, stone and marble. With understatement and nonchalance, they reflect the still fashionable industrial look: ground concrete and smoothed surfaces paired with metals, such as black steel or even glass and rotary cut veneer. Decor innovations such as the silhouetted glass decor “Window”, steel decors or the expressive “Terrazzo Nero” as well as diverse concrete variants represent casual industrial charm.

When it comes to wood decors, the trend is for light, natural wood species with balanced, more muted grain and figure.

Edging expertise from Ostermann As a long-time partner of Pfleiderer, edgings specialist Ostermann was informed beforehand of the new colour and decor developments. The experts from the product management “edging” got to work with the goal of quickly finding the matching edgings to the 34 new surfaces in order to be able to provide them as soon as possible. And the work has paid off. The new edgings are available in the standard widths 23, 33, 43 and 100 mm, and upon request in any width up to 100 mm.

International colour standard The Pfleiderer Design Collection is available across the world in the same colours and decors. Just like the new extension of the range, the matching edgings are globally available, and can be ordered in the multilingual Ostermann online shop that is translated in 10 languages: with perfect colour matching between edgings and boards.

22

Panel & Joinery Production - May / June 2019

Delivery from 1 metre With its familiar fast delivery service for stock articles, Ostermann supplies edgings made from ABS, melamine, acrylate, aluminium and solid wood, in every length starting from 1 metre, and in every width up to 100 mm. Europe’s largest range of edgings comprises more than 12,000 edgings to match the board surfaces of more than 70 board suppliers. Always included: the matching edgings to the surfaces of the current Pfleiderer collection!

For more info, type in the search item “highlights042019” into the search field on the starting page of the Ostermann online shop www.ostermann.eu Ostermann Services at one glance • Edgings from 1 metre • Edgings in every width up to 100 mm • Edgings in various thicknesses • Edgings in ABS, Melamine, 3D-acrylic, Aluminium, Real wood veneer • Airtec edgings despatched after 4 working days • Laser edgings despatched after 4 working days • Infratec edgings despatched after 4 working days • Edgings pre-glued with hotmelt adhesive upon request • The largest Cross-Reference-List in Europe with over 120,000 matches • Europe‘s largest edging range • All orders placed before 4.00pm are delivered within 24 hours • 2 % discount on every online order (Shop and App) Ostermann supplies the matching edgings to the latest Pfleiderer surfaces in the standard widths 23, 33, 43 and 100 mm, and in any width up to 100 mm upon request.

Service, diversity and speed

Colour

Material

Finish

Matching!

Ostermann delivers the matching edgings for more than 70 board suppliers, from 1 meter and within 24 hours.

www.ostermann.eu

Ostermann UK Ltd π Droitwich UK: Phone 01905 793 550 – sales.uk@ostermann.eu IE: Phone: 0044 1905 793 552 –sales.ie@ostermann.eu

Decorative Surfaces Traditional Kitchens Charming and Elegant A traditional kitchen is one of the most popular and versatile style concepts that includes several design elements, including warm colours and symmetrical lines and which allows homeowners to feel comfortable and elegant at the same time.

A modern contemporary interpretation of traditional combines new fresh woodgrain designs with plain colours in matt or supermatt textured surfaces. Keep an installation current by connecting up to date decors with the latest trend toned solid colour doors or within the surrounding room by the use of accessories and soft furnishings.

Oak remains a firm favourite in this genre. RENOLIT ALKOREN Kendal Oak is a smooth oak with subtle details and an even uniformity of colour. A gentle linear structure flows around attractively proportioned swirling knots. The surface has a light distribution of linear pores giving it a natural look with a velvety, pleasant touch.

An alternative contender, and a break from the norm, is the up and coming Rockford Hickory. One the latest new décor’s on offer in RENOLIT’s stock range, it is a robust and versatile. This sophisticated design is created by light pores and contrasting cathedrals.

Variation of pattern and colour emphasizes it’s inherent beauty. Complement with the subtle tone of Stone Grey Supermatt and a fresh forest green to create a traditional effect with modern appeal.

A more recent development of a traditional kitchen is the appearance of painted look woodgrain textured single colour doors that give a modern twist to conventional kitchen design.

Painted timber look, such as RENOLIT’s 3D thermoformable Modern Ash, is particularly suited to present-day new build homes where the owner desires the quality and design statement associated with a traditional kitchen but in a smaller space where a full woodgrain décor may be domineering.

Modern Ash is a deep, visual ash structured surface emboss which creates an up-to-date contemporary painted timber finish. A style which fits well with a variety of 5-piece or routered door styles. The Modern Ash emboss matches Egger’s ST27 and RENOLIT offers a wide spectrum of 7 colours. Illustrated here are two different colour ways; dark and light to illustrate how trending accessorising or a change of wall paint will have a dramatic effect on the overall feel of a kitchen.

The dramatic dark colour of Onyx Grey provides a statement to any room. Needing little to lift the effect further it can be easily combined with a variety of colours to meet the individual’s preferences. Shown here combined with Tin Plate, OakENDgrain Delight or Fern to create a pleasant interior.

RENOLIT ALKOREN Natural Kendal Oak with Wave Blue

24

Panel & Joinery Production - May / June 2019

At the other end of the spectrum, the soft light tone of White Grey Modern Ash provides an ideal backdrop which can be enriched with bolder woodgrain designs such as Inedito 1 SC, or by adding warm metallic Rose Gold to provide a bright and cheerful atmosphere.

RENOLIT ALKOREN White Grey Modern Ash

RENOLIT ALKOREN Onyx Grey Modern Ash

RENOLIT ALKOREN Dark Rockford Hickory

For further information and to request a 2018/2019 Trends brochure: T: 01670 718222 E: renolit.cramlington@renolit.com www.renolit.com Panel & Joinery Production - May / June 2019

25

Decorative Surfaces Benif Interior Film On The Menu At Carluccio’s The well-known Italian restaurant chain Carluccio’s, founded by the late, charismatic chef Antonio Carluccio in 1999 has over 70 restaurants in the UK. As part of the company’s environmental policy to refurbish equipment rather than replace it where possible, Benifi Interior Film from David Clouting was seen as the perfect solution to refurbish the surfaces of a number of under counter fittings such as chill cabinets and storage units whose surfaces had, over time, become scratched and worn but the equipment was still perfectly functional.

Benif Interior Film, manufactured by LG Hausys, is a self-adhesive, architectural film that can be quickly and easily applied to most interior surfaces.

For this project specialist contractors Distinct

Decorators used a Benif solid graphite Interior Film to cover the surfaces, the results which were achieved without any major operational disruption to the business, were both visually pleasing and practical thanks to the Benif’s low maintenance requirements and longevity of performance.

With over 400 Benif designs and finishes to choose from, walls, doors, paneling, skirting and architrave can be quickly refurbished without the need for costly replacements.

Benif Interior Film is CE and IMO Certified so can be specified with confidence for a wide range of applications. www.davidclouting.co.uk

The refurbished surfaces using a Benif solid graphite interior film

26

Panel & Joinery Production - May / June 2019

Decorative Surfaces Primeboard Is The Latest Addition To IDS’s Decorative Panel Portfolio Specialist surface materials distributor IDS offers a vast depth and breadth of decorative panel products, enabling customers to source everything they need from one supplier.

Ranging from raw boards, MFC, MF MDF, CDF, matching edging tape and more, IDS has access to a huge variety of materials from the industry’s leading manufacturers including Swiss Krono, Pfleiderer, Finsa, Kronospan and Forescolor, ensuring that any request can be fulfilled and budget met.

With a vast choice of sheet sizes and thicknesses, cutting edge textures and in line registration, IDS is continuously investing in product development and innovation to provide customers with the latest products and broadest portfolio possible.

trend greys, Light Grey and Anthracite.

IDS is the primary stockist for Pfleiderer’s PrimeBoard range in the UK. IDS customers benefit from access to hundreds of decorative panel product lines available ex-stock.

The company’s unrivalled product choice is further enhanced by providing customers with professional product specialists within the dedicated sales teams.

IDS has 17 regional branches, which offer nationwide coverage and core products can be delivered in 24-48 hours from order.

T:0845 023 0376 E: solutions@idsurfaces.co.uk www.idsurfaces.co.uk

The latest addition to IDS’s extensive decorative panel portfolio is PrimeBoard by Pfleiderer, a fine but robust MDF panel. Combining an attractive painted look, optimum workability and high durability, PrimeBoard boasts innovative multi-coating technology that makes it easy to clean and permanently withstand stresses.

With two finish options PrimeBoard XTreme Matt and PrimeBoard XTreme High Gloss, the product is available in nine colours ranging from Crystal White through to Volcanic Black including two on

Panel & Joinery Production - May / June 2019

27

Decorative Surfaces Surface Appeal James Latham has just announced the addition of three new collections to its popular high-end range of decorative panels, Xylocleaf.

Combining outstanding Italian design with classleading standards in melamine processing, for Xylocleaf, the feel of a surface is just as important as the contemporary, on-trend look.

The inspirational new collections include; Mosaico, which offers a weaved leather surface, Duna, comprising a registered, embossed stone surface and Alpaca, featuring a soft cotton texture.

In addition, three new products have also been added to the Fusion collection. Fusion is totally unique in that it has linen textile bonded to its surface, with a thin layer of protecting resin, thus combining a natural surface – the fabric, with the industrial process of creating a decorative panel. Fusion surfaces were developed in Italy by XyloCleaf and it is the only manufacturer worldwide that can create them.

Xylocleaf is already extremely popular for premium commercial, retail and leisure specifications as it is strong, durable and highly scratch and chemical resistant, so as well as looking great, it is particularly well suited for high traffic areas.

These features also make Xylocleaf a popular choice for residential applications as it can be used to manufacture all kinds of interior furniture from worktops and cupboard doors in kitchens and

28

Panel & Joinery Production - May / June 2019

bathrooms to tables, desks, shelving, wall panelling and even internal doors.

Paul Morson, James Latham’s Group Product Champion for Melamine commented, “These latest additions offer even greater choice to architects, interior designers and furniture makers who are looking to add dimension, depth and texture to their projects.

“Xylocleaf has become a real success story for us and is now one of our most popular decors, particularly with our customers in the residential and leisure sectors.”

Because Xylocleaf surfaces are made in the form of panels, laminate sheets and matching ABS edge banding, textures, finishes and colours can be blended, allowing different parts of a commercial or residential design scheme to feature matching or contrasting items, creating a fluid and contemporary finish throughout.

For more information and samples, contact your local James Latham depot or call into Latham’s Product Specification Showrooms in either London or Manchester.

T: 0116 257 3415 E: marketing@lathams.co.uk www.lathamtimber.co.uk

Make your space the place

S M O O R TO T H G U BRO

LIFE

decofoil deco foil 3D Forming Veneers for kitchen, bedroom and bathroom furniture We offer an exciting range of contemporary and traditional styles, all with excellent board matches Find out more about our exciting range of contemporary LG Hausys PVC foil materials for kitchen, bedroom and bathroom.

Call: +44 (0)1376 518037

Fittings Think Differently About Blum When manufacturers specify Blum products, they are signing up for more than hinges and drawer boxes. The Blum philosophy means that all touch points of their products need to be satisfied, with not only a superior product, but also technical expertise, training, aids in selling and end user satisfaction, enabled with their matchless Lifetime Guarantee on all products.

Storage The innovative and popular Space Tower larder unit is the most efficient way of providing maximum storage space in a given area – up to 55% more useable space compared with fixed shelves. Each internal pull-out, be it LEGRABOX Pure, LEGRABOX Free or TANDEMBOX antaro is individually fully extendable so there is no need to leave a void above each drawer for the removal of items, and the contents are wholly visible and accessible on three sides. Drawers can be up to 650mm deep and there are nine widths available, from 300mm to 1200mm.

New runner Our Blumotion S runner works with three opening/closing technologies; SERVO-DRIVE, Blum’s electric opening system for pull-outs; Tip-On BLUMOTION which is a mechanical opening system (Tip-On), combined with Blumotion softclose; and simple BLUMOTION – Blum’s tried and tested soft close mechanism. The Blumotion S runner can be used with both LEGRABOX and MOVENTO drawers and ensures that manufacturers can offer different opening/closing technologies without having to change their runner system.

Wall units Lift-up motion for wall cabinet doors means the door does not intrude into the room so is an advantage for smaller kitchens and bathrooms. Blum’s AVENTOS lift systems

30

Panel & Joinery Production - May / June 2019

provide a system to suit even heavy doors, ensuring they can be opened all the way up or with a mid-stop function.

Open with AVENTOS, close with soft-close BLUMOTION, adding SERVO-DRIVE or TIP-ON technology for ease of opening handleless doors. There are four families of AVENTOS, choose from AVENTOS HF bi-fold upwards opening; AVENTOS HS swing up and over; AVENTOS HL upward parallel front lift and AVENTOS HK with upward pivot fronts.

Hinge Benefits Blum hinges have been refined over many years of research and now provide intricate and reliable performance. The CLIP top BLUMOTION hinge combines ease of assembly (just clip the hinge into place) with near perfect motion, and integrated BLUMOTION closing – ensuring a silent smooth closing action. The CRISTALLO hinge for glass and mirrored doors has super-accurate stability and the new EXPANDO T hinge, a German Design Award winner, is designed for ultrathin (from 8mm) door fronts, a growing trend in kitchen design.

Technical assistance The Blum technical helpline is available daily, 8am to 8pm and Saturday mornings, 8am to noon, while the Blum kit store sells assembly devices online, and also includes a link to sign up for training sessions, held at Blum UK in Milton Keynes. The Live Support App links straight through to the tech team, who will be able to advise and annotate directly onto a smartphone pic.

T: 01908 285700 www.blum.com

hurry... they won’t hang around forever fundamentals A diverse range of designs available from stock under the banner of our dp-fundamentals range.

Available in varying widths and quantities, these foils can be laminated single or double sided to any of our extensive range of substrates at discounted levels.

Contact us for more information.

Century House, Premier Way, Lowfields Business Park, Elland, West Yorkshire, HX5 9HF

T: +44 (0) 1484 658341 E: info@decorativepanels.co.uk www.decorativepanels.co.uk

Fittings New Armor-Coat® Hardware Range Certified Best Forged Steel Product Increased exposure to salty air and higher wind speeds makes choosing quality window and door hardware vital - and the new range from Stonebridge has now been certified as the best forged steel product available.

“We’ve designed this new range to give consumers a stylish choice of hardware that they can be confident will last for a very long time,” says Ian Smith, Design & Brand Manager at DJH Group, owners of the Stonebridge brand.

As an island nation, nowhere in the UK is more than 70 miles away from the sea and it’s estimated that around three million people live on the coast. Rust and atmospheric pitting is a common problem for homeowners who live in coastal areas due to the high concentration of sodium chloride in the air.

But these problems aren’t exclusive to the seaside. People living in industrial areas can also experience difficulties due to the corrosive effect of airborne pollutants as a result of certain manufacturing processes.

“To come through a 480-hour salt spray test is a massive achievement. Our nearest competitors failed at well under half that time, so that just shows how difficult it is.”

Stonebridge’s Armor-Coat® range has been successfully tested to BS EN 1670:2007 Grade 5, the highest possible standard. The test required products to be exposed to a neutral salt spray under controlled laboratory conditions for 480 hours and the results showed exceptionally high corrosion resistance.

As well as providing exceptional protection from corrosion, the Armor-Coat® system also incorporates UV protection for fade resistance.

The new range of architectural hardware from Stonebridge combines traditional designs with a contemporary twist.

Available in black and satin steel, it’s manufactured to the highest possible quality and features exquisite fine detailing.

“The new Stonebridge range is as durable as it is stylish,” Ian concludes. “The test certificate proves exactly how robust and hard-wearing it is. Just ask us to see a copy of the certificate.”

www.stonebridgeforge.com

32

Panel & Joinery Production - May / June 2019

Profile AXYZ Infinite To Set New Benchmark For Multi-Purpose CNC Routers Following successful completion of a major rebrand and restructuring initiative, the recently constituted AXYZ Automation Group has announced the first of a planned series of new product innovations. The AXYZ Infinite multipurpose CNC router builds on the legacy of previous AXYZ machines in terms of outstanding build quality, reliability and higher productivity levels. With a fresh design concept and a number of optional machine enhancements, the Infinite is aimed at setting a new benchmark for machine configurability, flexibility and price/performance productivity.

For over 30 years, AXYZ routers have been renowned for their ability to meet the sometimes complex requirements of companies in many diverse industries for which advanced CNC routing/cutting technology has been a major contributor to business growth and profitability. With around 367,000 different machine configurations currently available, AXYZ routers have been able to accommodate every conceivable routing/cutting requirement, from bespoke one-off and/or small-batch through to high-volume production runs at what are acknowledged to be the most competitive prices currently available.

Key design features of the AXYZ Infinite include a heavyduty solid steel frame construction to accommodate more vigorous machine operation and a new carriage design that provides easier access for servicing. The machine can be configured with a choice of single, dual or triple routing/ cutting heads, with a processing bed size of 3,251mm (width) by 15.24 metres (length). There is also a newly designed and more efficient dust extraction system to radically reduce

clogging of the router and eliminate consequent unwanted and expensive machine downtime and an improved misting system that enables more efficient machine cooling and lubricating functions.

The AXYZ Infinite can also be supplied, if required, with the latest optional VCarve Pro and Aspire design and production software programs, both of which provide all of the necessary tools for 2D and more complex 3D applications.

With the Aspire option, machine owners can now engage with specialised work such as solid surface panel processing, engraving and milling and 3D model-making, thereby opening up new market opportunities and increasing profitability.

AXYZ Automation Group customers also have access to a wide range of optional machine enhancements. In particular, these include the AXYZ ATC (Automatic Tool Change) system that provides up to 33 tool-change stations for work involving multiple tools, the AXYZ Zone Management facility for optimum material hold-down efficiency and the latest A2MC machine controller with the integrated AVS (AXYZ Vision System) facility. There is also the latest helical rack and pinion drive system incorporating a multiple gear teeth configuration. This helps spread the workload more evenly, resulting in faster throughput speeds, reduced machine wear and material wastage and ultimately a longer than normal machine life.

T: 01952 291600 www.axyz.co.uk

The multi-purpose CNC router from AXYZ Automation

Panel & Joinery Production - May / June 2019

33

BY THE NUMBERS

45,000+ ACTIVE USERS WORLDWIDE

According to the latest CMA Benchmark Study, more woodworkers choose our products than any other software system. In fact, it’s not even close.

35

HOW LONG WE’VE BEEN DEVELOPING SOFTWARE

97%

SATISFACTION WITH OUR SUPPORT

We’ve learned a thing or two since we started offering software for woodworkers in 1983.

Whether via phone, email, support portal, or our online forums, our technicians are here to help.

117,950,504 DATA ITEMS TESTED EVERY WEEK

We run our software through test after rigorous test to ensure that we only release the most stable products to our customers.

85 / 11 COUNTRIES/LANGUAGES

Our software can be found all over the world and it’s available in 11 languages.

HexagonMI.com

We may have only a couple of days to do an impossible job, but ALPHACAM makes it possible.

Jason Szukalski Director – Anarchy Ltd

Without CABINET VISION, we’d probably need three additional members of staff to achieve what we do.

Ruth Lovelock Hetherington Newman

ALPHACAM & CABINET VISION THE WORLD’S #1 SOFTWARE SOLUTIONS FOR THE WOODWORKING INDUSTRY ALPHACAM & CABINET VISION offer the complete engineering solution for the woodworking industry. Our strength is in providing innovative solutions that can grow with your company.

ALPHACAM provides unparalleled ease of use, process automation, and sophisticated toolpath generation, seamlessly integrating both 2D and multi-axis cutting strategies which can be applied to any type of component.

CABINET VISION is capable of custom cabinet and room design, photo realistic rendering, material optimisation, bidding and costing, cutlists and bill of materials.

Combined with the powerful Screen to Machine Center, it can automatically create machine ready G-Code for your CNC machinery.

Alphacam.com | CabinetVision.com

Case Study Cookstown Panel Centre Gains Cutting Advantage With HOMAG UK SAWTEQ B-300 with integrated lifting table for Cookstown Panel Centre – efficient, accurate and reliable processing

Based in an 85,000 sq. ft. facility in County Tyrone, Northern Ireland, is the £10m turnover business, Cookstown Panel Centre. The company, established in 1983, has always insisted on sourcing the finest materials and machinery to produce its renowned range of kitchen products.

“Our customers demand top quality products,” explains managing director, Gerry Mallon. He continues, “That’s why we buy the best materials we can and when it comes to machinery, HOMAG is always our first port of call.

“The relationship with HOMAG began over 25 years ago when I first met Derek Reid, the company’s representative here in Ireland. Straightaway, I was impressed with Derek’s approach and knowledge of the woodworking industry.

“Over time, we’ve built up a really strong rapport and his in-depth understanding of our business has gone from strength to strength. Derek doesn’t pull any punches, so when we ask his advice we know we can trust him to give us not only his honest opinion, but also a solution that is the very best for our business.”

Time to sharpen the saw “In 2018 it became apparent that we would need to upgrade one of our beam saws to enable us to satisfy the increasing demand for our products. We wanted

36

Panel & Joinery Production - May / June 2019

to improve our efficiency and the accuracy of our production whilst at the same time maintaining the reliability and continuity.

“Customers lead times are coming down all the time and it would be disastrous for our business if we couldn’t deliver what they want, when they want it. Gone are the days when you could say to the customer, “It will be delivered in three weeks.”

That just won’t wash now, people expect product to be ready in a few days at the most, even if they are bespoke items.

“Having made the decision to invest in a new beam saw we spoke first with Derek and asked him to come back with a proposal and specification for a beam saw.

We explained that we wanted a solution that would not only satisfy our current demands, but would also be able to cope with future growth.”

HOMAG SAWTEQ B-300 with integrated lifting table “Although we have a long-standing relationship with HOMAG, we are conscious not to overlook other options that might be available in the market. In this instance, however, the solution Derek came up with, a HOMAG SAWTEQ B-300 with integrated lifting table, made the most sense in every way.

“The saw has all the latest technology from HOMAG. It can handle large 4.2 m panels and delivers short production times and high throughput due

Case Study to automatic feeding via the lifting table. For our operation, the lifting table is essential; most of our products are cut from 2.8 m boards which are stacked onto the lifting table by fork lift truck, thus avoiding manual handling.”

Efficiency, accuracy & reliability “Historically, we have used the Magi-cut software in our business. It enables us to drive the production process from the offices, rather than the factory floor.

The Magi-cut software is easy-to-use and integrates seamlessly with the HOMAG saws.

“Using this software enables us to plan efficient cutting processes and we can optimise waste and systematically lower the overall costs for cutting. It gives us full control of costs and is quick and easy to use.”

Feeding the edge banders “With the increased volume of bespoke products of varying shapes and sizes, it is vital that our beam saws can maintain high throughputs. This is not only to maximise the potential of our two latest HOMAG edge banders, but also to enable us to meet the spikes in demand that are part of everyday business pressures in our service orientated world.

“Because the new saw is much more user friendly and is packed with the latest technology, it is far more efficient and accurate. It has enabled us to maintain and improve our service to customers.

“The SAWTEQ B-300 does what it says on the tin.

It’s what you would expect from the world’s largest woodworking company: a reliable, highly accurate and super-efficient saw. We believe it will pay for itself within two years and so we’re more than happy with it,” concludes Gerry Mallon.

HOMAG Magi-cut software – quick and easy production

T: 01332 856424 E: info-uk@homag.com www.homag.com Panel & Joinery Production - May / June 2019

37

Software Felder Recommends CABINET VISION To CNC Novice - Neighbour Construction Says Software Makes Them “A Real Game Player” Until just over a year ago, building and joinery company Neighbour Construction had never used a CNC machine, and didn’t know that combining it with specialist software could help transform the business.

When they invested in a Felder Profit H 200 pod and rail machining centre, Felder recommended they program it with CABINET VISION software, as almost all their work is bespoke. Now, Neighbour Construction director Dominik Dubaj says CABINET VISION has eliminated all human error and means they can cut around 16 cabinets for a kitchen, and have them sanded with a primer coat applied, within a day or two. And bedroom wardrobes which would have taken two or three days to make previously, can now be produced in around five hours, to the preassemble stage.

“We had zero knowledge and experience of working with CNC machine tools, but saw immediately that the standard proprietary software was not going to be effective in creating programs for the bespoke products we manufacture – the calculations would have simply taken too long.

“From the very beginning CABINET VISION removed any issues we had previously with manual work where panels sometimes weren’t square and had

to be redone. We’d only find those problems when something wouldn’t assemble properly on site. But CABINET VISION ensures every panel is 100 per cent accurate, and means that our installations now take just one or two days instead of a week.”

They have recently replaced a panel saw with a Felder CF 741 S combination saw, and even though CABINET VISION doesn’t program it as it’s a manual machine, the software does play a large role with it. “CABINET VISION has been specially configured for us to generate a cutlist for pre-cutting the panels on it,” says Dominik Dubaj. The company worked with the same type of bespoke User Created Standard (UCS) for their previous panel saw, too.

“We use the CABINET VISION cutlists to precut the panels on the combination saw, oversized by 6mm.

38

Panel & Joinery Production - May / June 2019

Software Then the software generates precision dimensions for finishing on the Profit H 200 pod and rail machine.

These correspond to the design, and the program includes features, such as holes for our cam and dowel joints.”

As well as manufacturing and fitting their joinery products, the software means they can also offer their products in flat-pack format, for customers who want to carry out the assembly themselves. It guarantees that the panels have the required high precision throughout, including overall dimensions, and the positioning of the cam and dowel holes.

Neighbour Construction was formed in 2006 as a building company, working on walls, roofs, steelwork and foundations, before expanding to provide fit-outs with joinery and cabinetry for kitchens, bathrooms and bedrooms. Having successfully built a strong reputation, he felt the time was right to take the company to the next level, which involved moving to a bigger workshop and investing in CNC machinery.

At 3,000 square feet, their current premises in Edmonton, North London, are between three and four times the size of their old factory, and they now operate with five employees. “The combination of

machinery and CABINET VISION helps keep costs down, while ensuring that everything we produce is right first time, every time.”

Working mainly with moistureresistant MDF Medite , Birch Plywood, and other veneered MDFs, the first part of their process is to design the individual cabinets and the room layout in CABINET VISION. “We even use it if we’re only creating a couple of cabinets. I can’t imagine doing any joinery cabinet work without it now. The 3D design - already has the NC codes behind it, which means we only need to do the work once.

Then we produce the cutlists. The process really is that simple.

“With CABINET VISION we have an image of what we’re cutting, so we can see the panels both on-screen and on printouts, and we have a list of dimensions for the operator to follow, along with the labels for each panel which are printed in sequence. Our machine operators follow the cuts on the list, and we can easily keep order of the panels, and know which programs need to be executed to build a bespoke cabinet.

“It also shows the amount of material we need, which helps us get accurate costings.”

In conclusion, he says CABINET VISION gives the business greater capacity, as it only takes a couple of days to get product from design to installation, if necessary. “I can’t imagine producing precision products this quickly if we were using traditional methods. “CABINET VISION makes a major contribution to us being a real game player today.”

www.HexagonMI.com Panel & Joinery Production - May / June 2019

39

Case Study HOMAG Opens Doors For Hazlin Of Ludlow Since the company’s incorporation in April 1974, Hazlin has devoted itself to becoming the best manufacture of bespoke architecturally veneered doors, panels, frames and other related joinery items. Operating from its 40,000 sq. ft. premises in Ludlow the company has a turnover in excess of £7.5 million.

“Over the years, we’ve developed specialist expertise in everything from door design and fire resistance to veneer matching issues and acoustic ratings,” explains Hazlin of Ludlow’s managing director, Chris Jones. He continues, “In the 45 years we’ve been in business, the market has changed beyond recognition and so have the manufacturing processes.

“Our goal has always been to ensure that the business has the capability to keep pace with the changing needs of the market. It is for this very reason that we have recently invested close on £1 million pounds to improve our manufacturing efficiencies.

“A major part of this investment has gone into new machinery from HOMAG UK. Hazlin has been dealing with HOMAG for more than 20 years now and in that time we’ve come to appreciate the quality and technical advantages their equipment brings to the table.”

A bottleneck in storage and retrieval “Increasingly, we were experiencing downtime on the saw because of issues in retrieving stock. We have the capability to use a wide variety of cores in our door production and this brought its own challenges when it came to storage and retrieval.

40

Panel & Joinery Production - May / June 2019

“The less popular door cores had a habit of ending up at the bottom of a pile of stock, so it tended to take a long time to find the relevant core, de-stack it, deliver it to the saw and then go back and re-stack the door cores we’d moved to access it.

“HOMAG’s ‘saw & store’ system has changed all that.

Our setup uses the STORETEQ S-500 linked to the SAWTEQ B-400 beam saw. It has revolutionised the efficiency of the saw and given us ultimate traceability of our stock. That’s really important for us; it’s so much better and more accurate than the old paper system.

“Now we can prove exactly what product has been used in each job which, when you make fire doors, is extremely important for third party accreditation.

In terms of efficiency, the results are even more impressive, with our throughput having increased dramatically.

“Currently a cut list is being completed within around six days of being issued and we plan to get that down to three days as we maximise the system’s potential.

Historically, with the manual storage and retrieval system, it took two to three weeks to complete each cutting list, so the efficiency gains are massive.

“Also, we can now operate the saw with one person, not two which means we can deploy the second member of the team to carry out important tasks elsewhere in the facility.”

HOMAG EDGETEQ S-800 with LOOPTEQ return system for increased production efficiency

Case Study

HOMAG EDGETEQ S-800 with LOOPTEQ return system “The second area where we were looking to gain improvements in efficiencies was edge banding. Our existing machine was nearly 20 years old and required five people to operate it when we were running at full capacity.

“We sat down with Jon Lawman, our contact at HOMAG, and briefed him on what we wanted the edge bander to deliver. He came back with a very thorough proposal for the specification at a competitive price and so we went ahead and ordered the EDGETEQ S-800 with a bespoke return system that would handle the various door sizes we produce.

“The new S-800 runs at 18 m/min compared with the old machine which could only produce 10 m/min.

What’s more, we are able to achieve this with just two operators, giving us further labour efficiencies.

“The new machine has the potential to edge doors up to 76 mm thick with solid wood lipping. This is very important for us as many of our doors are over 60 mm thick. For our purposes, we specified the PUR glue system which gives us a good visual appearance with a very strong bond.”

The next generation CNC “Rounding off our investment with HOMAG, we have a new CENTATEQ P-300 CNC on order which is due for delivery in the second quarter 2019. We already have two HOMAG CNCs which have consistently performed reliably and delivered excellent results.

As a consequence, when it came to ordering a new machine, HOMAG was our first choice.

“The CENTATEQ P-300, with its five axis spindle, will be a great addition to our CNC portfolio. It will easily handle lock case routing, step drilling for drillin hinges and precise miter cuts. As with the other new machinery, this CNC will further improve our efficiency.”

A professional company with first class machinery “When you invest in HOMAG machinery you know what you are going to get. The kit is reliable and wellengineered, as you’d expect from a German company.

Not only that, but because HOMAG is the global market leader, you also know that the machines are at the cutting edge of technology.

“The HOMAG UK team are always willing to support us.

For example, the purchase package HOMAG finance put together through Deutsche Bank for the purchase of the new machines was simple to arrange and tailored to our needs.

“As a company, they always seem to be looking for ways to improve their products and service levels. It’s an approach which sets them apart from many of their competitors,” concludes Chris Jones.

If you’d like a demonstration or more information about the HOMAG ‘saw & store’ system, edge banding or CNC solutions: T: 01332 856424 www.homag.com

Panel & Joinery Production - May / June 2019

41

What’s New Win With Ronseal And Be At The Heart Of The Rugby Action Ronseal, proud sponsors of the Rugby Football League, are giving away hundreds of great rugby prizes in a massive competition to celebrate Great Britain Rugby League’s tour of New Zealand and Papua New Guinea.

The top prize is a once-in-a-lifetime trip to New Zealand to see the Great Britain Rugby League Lions square up to the New Zealand Kiwis with flights, accommodation and airport transfers all courtesy of Ronseal. Runners up will visit Wembley for the Coral Challenge Cup Final and there are lots of great rugby-themed Ronseal prizes up for grabs including rugby jerseys, water bottles and mini rugby balls.

The competition, which runs from 1 May to 15 July 2019 couldn’t be easier to enter with hundreds of prizes just a click away by visiting www.ronseal.com/competition.

Winners will be drawn at random from all the entries once the competition has closed on the 15th July.

The Great Britain tour of New Zealand will see the team play for the first time since 2007 and they will face Tonga and Papua New Guinea as well as the mighty Kiwis. The winner of the Ronseal competition will travel in style, business class, to Auckland, New Zealand, and receive seven nights’ accommodation, private airport transfers and a pair of all-important hospitality tickets to the Great Britain v New Zealand game on 2 November 2019 at Eden Park in Auckland.

New Logo For Xylexpo Desire for change and progress is in the air at Xylexpo: after the decision to bring the exhibition timeframe to four days (from Tuesday 26 to Friday 29 May 2020), a new logo has been launched officially, twenty years after the rebranding from Interbimall to Xylexpo and the introduction of the logo that has characterized the international exhibition until the latest edition in 2018.

So, as of 2020, a new age is opening with a visual symbol that represents the mission of the event, i.e. tools to process wood and wood-based materials, while adding a modern, contemporary, clean and linear style.

42

Panel & Joinery Production - May / June 2019

The Coral Challenge Cup is Rugby League’s showpiece occasion and runners up in this Ronseal competition can experience the atmosphere and excitement for themselves with tickets to the match at Wembley on 24 August 2019.

Ronseal products are known and trusted throughout the world for doing exactly what they say on the tin. Based on the company’s innovate technology development, Ronseal woodcare products are relied on to protect, treat, and preserve wood inside and out. Ronseal is a brand of the Sherwin-Williams Group.

E: enquiry@ronseal.co.uk

What’s New The Screw-Tite® Revolution Continues Screwfix is delighted to announce the launch of the next generation of Screw-Tite® award winning screws, designed to be the best performing woodscrew on the market.

The new Screw-Tite®2 product not only incorporates all the unique features of its predecessor but now with several new advancements, it provides the ultimate product in screw technology.

When the original Screw-Tite® screw made its debut, it revolutionised the Trade and DIY market in terms of performance, quality and price. Now, following extensive re- development, the new Screw-Tite®2 version offers even greater benefits for a wide range of applications.

The new screws benefit from a Dowel-Tite® Shank and dowel ream just below the head, a clever twist on tradition that reduces lateral movement and ensures the timber is clamped securely with a firm fix. The larger diameter of the reaming shank ensures a perfect fit for the shank and reduces timber splitting.

thread system provides 25% less insertion torque, avoiding timber damage, whilst still delivering a superior grip and a straight, smooth easy drive.

Tradespeople, serious DIYers and discerning craftsmen/ women can get hold of Tite®’ products online at www. screwfix.com, from one of over 615 Screwfix stores nationwide or via its 24/7 contact centre: T: 03330 112 112. www.kingfisher.com

The unique ‘Tri-Lock™’ thread form system, with a single thread and acutely angled twin thread on the same screw, allow it to work on a wide range of modern building materials, such as Breeze Block, plastic, masonry and sheet steel as well as hard and soft wood. In addition, the unique

WOODWORKING MACHINERY Introducing the NEW ATACAM CNC Routers

This new range of affordable CNC Routers from ATA Engineering offers the same high quality build that you come to expect from a company that has been supplying CNC’s for over 20 years, along with support and technical back up.

Standard sizes: 8 x 4, 10 x 5, 3m x 2m (Special sizes available on request) Standard Features: HSD HSK Spindles, Rotary ATC, Location Pins, Tool Digitizer.

3 and 4 Axis machines in stock.

Call for more information or a demonstration, or visit www.atacam.co.uk

Castle Pocket Routers from ATA Engineering

TSM22 Pocket Router The most popular Pocket Router in the Castle range has been re-designed with a new lift up table top to provide the following features: • Easier and quicker access when replacing the router cutter, drill and other parts during routine servicing and repair.

• Additional safety feature which automatically disconnects the electrical supply to the Bosch motors.

This long established and widely used model continues to provide the quickest and strongest method for kitchen and bedroom carcass manufacture, retail display stands and other interior fitting applications.

Router Cutters A comprehensive range of routing cutters in HSS, Carbide tipped and solid carbide to suit a wide variety of applications in aerospace, woodworking, plastics and composites. Enquiries welcomed for special cutters.

Extensive Stock ATA Engineering carry an extensive stock of cutters, tool holders and collets, all for next day delivery.

ATA Engineering Processes Ltd ATA House, Unit B, Boundary Way, Hemel Hempstead, Herts, HP2 7SS t: 01442 264411 e: sales@ataeng.com www.ataeng.com

Panel & Joinery Production - May / June 2019

43

Dust Extraction Energy-Saving DCS Retrofit For Rosebirch The joinery workshop at Rosebirch Ltd is now cleaner and quieter thanks to a new dust extraction filter unit and energy-saving Ecogate® system supplied and installed by Dust Control Systems Ltd. Rosebirch is a second generation family-run business, operating from a modern 12,000 sq. ft. manufacturing facility at High Spen – a former mining village in Tyne & Wear. Utilising materials as diverse as hardwood and glass, metals, veneers and solid surfaces, Rosebirch specialises in bespoke fabrication for the fit-out of retail and commercial spaces, and has established a reputation for its work on projects throughout the UK and Europe.

The joinery workshop at Rosebirch is well-equipped with a wide range of wood and panel processing machinery, including an array of saws, sanders, planers and a high-speed CNC router. However, the ageing filter unit was no longer capable of dealing effectively with the extraction volumes being demanded by the company’s high speed production machinery and, inevitably, a replacement was necessary.

Ecogate® greenBOX12, PowerMASTER variable speed drive unit, and DCS control cabinet.

Dust Control Systems (DCS), on personal recommendation, had been invited to review the company’s extraction requirements and Ray Townley, Area Sales Manager for DCS, visited Rosebirch to discuss the project with Managing Director, Stephen Flynn. “Due to the varied and bespoke items being manufactured at Rosebirch”, says Ray Townley, “the factory is kitted out with a wide range of dustproducing machines but, for most of the time, only a handful of those machines are actually in use. On occasions, however, around half the machines could be in operation at the same time. Building in a wide margin of safety, and future-proofing the system to accommodate additional or more powerful machinery, DCS proposed the installation of a filter unit that was sized to handle around 75% of the total combined extraction requirement of all the machines in the factory.”

To achieve this 25% reduction in extraction requirement, and the obvious cost savings this could realise, the system design proposed by DCS would employ Ecogate® energy-saving technology, with Ecogate® automatic dampers retrofitted into the existing ductwork system. Accompanied by Ian Rayner, Ecogate’s Sales Manager, Ray Townley and Stephen Flynn visited another DCS customer in the North East to observe an Ecogate® system in action, and to get first hand feedback from an end user on the potential benefits. “With Ecogate® technology, the extraction system is optimised to provide the exact extraction volume required, at any given point in time, depending on the number of machines in use,” explains Ian Rayner. “Extraction fan speed is adjusted automatically, in real-time, to match the changing requirements as different machines come on or offline.”

15,000m3/hr capacity ATEX-approved NFSZ3000 2HJLR filter unit delivers waste pressure-free via rotary valve

44

Panel & Joinery Production - May / June 2019

“The savings calculations, based on the predicted reductions in electricity costs derived from optimising the fan speed, compared with the cost of electricity needed to run the fan continuously, at full power, throughout Rosebirch’s working day, convinced

Dust Extraction Stephen that the initial outlay on Ecogate would be a sound investment.”

At Rosebirch, DCS installed a greenBOX12 controller and PowerMASTER variable speed drive unit, along with a total of 12 Ecogate automatic dampers, which were all installed into the existing ductwork system.

Externally, DCS supplied and installed an NFSZ3000 2HJLR Rotary Valve Filter, powered by a 22kW direct drive main fan, providing an air volume capacity of 15,000m3/hr. Filtered dust is delivered pressure-free from the filter unit, via a rotary valve, to a waste collection skip. The filter unit employs patented antistatic Superbag filter media, and a reverse air regeneration fan provides effective cleaning of the filter bags. Inspection and maintenance of the filter media is facilitated by side doors, which are accessed via an elevated steel walkway, and cleaned, warm air is recycled to keep the factory warm in winter, or dispersed to atmosphere in the summer.

“As soon as the new filter came on-line the increased strength of the suction was immediately apparent,” says Stephen Flynn, “but, because the extraction fan was only running when needed, and only extracting from machines that were being used, the overall sound levels on the factory floor have been significantly reduced.”

Rosebirch’s upgraded extraction system complies fully with ATEX regulations, and also includes a CARZ back-pressure isolation valve which, in the event of an explosion in the filter unit, prevents the effects of a pressure wave and flames travelling back along ductwork, and into the factory. The return air ductwork

22kW main fan and CARZ explosion isolation valve

has been retained from the previous installation and Gallito’s FastClip ducting has been used to complete external connections.

T: 0800 040 7116 www.DCSlimited.co.uk

A section of the joinery production area at Rosebirch.

Panel & Joinery Production - May / June 2019

45

Woodwaste Timber Frame Specialist Benefits From Investment In Wood Waste Heater A business that designs and builds timber frame buildings has purchased a new wood waste heater from Wood Waste Technology to save money on waste disposal bills and heating costs.

White Haus is one of the UK’s leading providers of timber frame homes and modular buildings. Established in 2004, the company operates from its 650 sq metre workshop based on the Cambridgeshire and Bedfordshire border.

Managing Director of White Haus, Adam White started to look at ways to reduce the amount of money spent on waste disposal whilst also finding a solution to the problem of the freezing cold workshop in the winter months.

Someone suggested he looked into the benefits of investing in a wood waste heater and referred him to Wood Waste Technology. Following more information and a site survey, Adam ordered a WT15 which was installed earlier this year

by Wood Waste Technology’s experienced engineers.

Adam says: “Our workshop was freezing cold in winter and we were spending around £1800 a month on skip hire to dispose of waste wood, so a wood waste heater seemed an obvious investment to efficiently dispose of our waste wood whilst generating free heating for our 30 employees.”

The company also purchased an add-on heat-dumpsystem to provide the flexibility to send the heat to the atmosphere rather than into the factory in the warmer months.

Adam says: “This was definitely the right route for our business.

It’s a good investment that will save us money whilst providing a more comfortable working environment for our staff.”

The WT5 Wood Waste heater installed at Tees Tech Joinery

Kurt Cockroft says: “A wood waste heater is most definitely a cost effective and productive solution for companies that generate a large amount of waste wood, and the investment can pay back within less than 12 months.”

Wood Waste Technology’s years of expertise in wood waste solutions have helped many companies reduce their waste disposal and heating costs. As well as offering site survey, design, manufacture, installation and on-going maintenance for new units, the company also services all types of wood waste heaters and supplies genuine spares up to 60% cheaper than other suppliers.

In addition, Wood Waste Technology is the UK official distributor for Gross Apparatebau GmbH, a German manufacturer of dependable, precision engineered shredders and briquetters, available in various size and specifications to suit all business applications.

T: 01785 250400 www.woodwastetechnology.com www.grossuk.co.uk www.putzmaus.co.uk

46

Panel & Joinery Production - May / June 2019

Suppliers Directory Reconditioned machinery specialist, Ferwood Group UK, offers a unique 10-step process that sees machines being stripped and rebuilt to the highest standard. With established machinery partnerships and a global sales network, you can experience its global machinery inventory on its website.

Combilift’s customised handling solutions ensure the safe, space saving and productive handling of long loads, pallets and oversized products.

The wide range includes multidirectional forklifts and sideloaders, pedestrian pallet stackers and narrow aisle forklifts, with electric, diesel or LPG power options.

T: 0113 286 6689 E: sales.uk@ferwoodgroup.com www.ferwoodgroup.com Twitter: @FerwoodGroupUK

T: 00353 47 80500 M: 07870 976 758 www.combilift.com

Masterwood have been developing and building CNC machinery for over 50 years for all areas of manufacturing. Supplying machines for the bespoke workshop through to fully automated systems for the larger production companies.

Our software range covers doors, windows, stairs, cabinets, and furniture, and 3D.

BA manufacture high quality decorative board panels and laminated sheet material for application in the kitchen, bedroom, furniture fit-out and interiors market worldwide. From industrial, architectural and domestic uses coupled with the widest choice, BA can design and manufacture solutions tailored specifically for your needs.

Masterwood GB Ltd T: +44 (0)1293 402700 www.masterwood.com

Blum specialises in the manufacture and distribution of furniture fittings. Their main product groups are lift, hinge and drawer systems for furniture, predominantly in kitchens.

Manufacturers can combine Blum fittings with mechanical and electrical motion technologies to deliver enhanced user convenience.

Blum UK T: 01908 285700 www.blum.com

T: 01302 890 555 www.byba.co.uk

A leading producer of machinery and systems since 1952, as well as service provider of the woodworking industry, SCM supply and install equipment that supports customers’ premise application and offer comprehensive demonstrations on the machinery.

T: 0115 9770044 www.scmgroup.com

Manufacturers of all sizes and industries can benefit from our knowledge and innovation. We are able to help you achieve a high level of performance and quality with the HOMAG machines and lines.

Decorative Panels is privately owned and managed by the third generation of the founding family and are proud to be Europe’s leading supplier of decorative faced sheet materials, panel components and flat pack furniture.

T: 01332 856500 www.homag-uk.co.uk

Tel: 01484 658341 www.decorativepanels.co.uk

2020 provides software, services and content to help professional designers, retailers and manufacturers in the interior design and furniture industries bring their ideas to life, inspire innovation and streamline processes.

Palamatic provide vacuum lifting systems for top lifting and rotating wood products including doors, large panels, boards and staircases weighing up to 350kg. Systems provide a safe handling solution for operators to load and unload CNC’s, edge banders, saws, laminators and paint lines.

T: +49 541 3550 140 www.2020spaces.com

T: +44 (0) 1246 452054 E: sales@palamatic.com www.palamatic.com

CONNECT TO THE BEST MANUFACTURERES IN THE INDUSTRY ONLINE & IN PRINT

£270 ANNUALLY

SEND US YOUR LOGO, CONTACT DETAILS & WEB ADDRESS PLUS A SHORT COMPANY PROFILE OR SEND YOUR ADVERTISEMENT AS COMPLETE ARTWORK - 90MM X 38MM

If only the perfect drawer existed …it would blend beautifully with my kitchen, it would have a sleek and elegant design that allows it to coordinate with all my colours and finishes, it would work effortlessly – moving and closing as if by itself.

Thinking like homeowners gives a new perspective now we invite you and them to take advantage of all the LEGRABOX benefits • impressive slim construction • wide range of colours • freedom to design and customise • multiple branding options.

www.blum.com/why-legrabox