21 Tungsten Carbide Landside Wedge RH AG-05833RH 3401900 2 x M10 x 30mm PA-0094110
- Tungsten Carbide Landside Wedge LH AG-05833LH 3401901 2 x M10 x 30mm PA-0094110
22 Reversible Furrow Splitter
23 Under Furrow Subsoiler Tine
24 Under Furrow Subsoiler Guard RH
3513201 1 x M20 Nut 69-20
PA-01679BRH 3513202
- Under Furrow Subsoiler Guard LH PA-01679BLH 3513203
LEMKEN CS40 Bodies
to fit CS40 Bodies
1 Mouldboard Stripe Upper RH
- Mouldboard Stripe Upper LH
2 Mouldboard Stripe Second RH
- Mouldboard Stripe Second LH
3 Mouldboard Stripe Third RH
- Mouldboard Stripe Third LH
4 Mouldboard Stripe Lower RH
- Mouldboard Stripe Lower LH
5 Shin RH
- Shin LH
6 20” Wing RH
- 20” Wing LH
7 Tungsten Carbide 20” Wing RH
- Tungsten Carbide 20” Wing LH
8 Reversible Point RH 12mm
- Reversible Point LH 12mm
9 3 Hole Share Point RH
3352134 3 x M12 x 35mm PA-0095110
3352135 3 x M12 x 35mm PA-0095110
PA-05808ARH 3365540 1 x M12 x 35mm & PA-0095110
PA-05808ALH 3365541 1 x M12 x 50mm PA-0095410
PA-05846RH 3364054 2 x M12 x 35mm PA-0095110
- 3 Hole Share Point LH PA-05846LH 3364055 2 x M12 x 35mm PA-0095110
9 Point Hardfaced RH 3 Hole PA-05863RH 3364150 2 x M12 x 35mm PA-0095110
- Point Hardfaced LH 3 Hole PA-05863LH 3364151 2 x M12 x 35mm PA-0095110
10 Tungsten Carbide Point RH
- Tungsten Carbide Point LH
11 Tungsten Reinforced Carbide Point RH
- Tungsten Reinforced Carbide Point LH
13 Tungsten Carbide Landside
AG-05846RH 3364054 2 x M12 x 40mm PA-0095210
AG-05846LH 3364055 2 x M12 x 40mm PA-0095210
AG-05846RRH 3364054 2 x M12 x 40mm PA-0095210
3411504 2 x M12 x 35mm PA-0095110 14 Wide Landside W52
15 Landside 480 x 120
3401481
(single) 18 Landside Wedge RH
3401900 2 x M10 x 30mm PA-0094110 - Landside Wedge LH PA-05833LH 3401901 2 x M10 x 30mm PA-0094110
19 Tungsten Carbide Landside Wedge RH
AG-05833RH 3401900 2 x M10 x 30mm PA-0094110
- Tungsten Carbide Landside Wedge LH AG-05833LH 3401901 2 x M10 x 30mm PA-0094110
20 Landside Protector
3401490 2 x M12 x 35mm PA-0095110
21 Under Furrow Subsoiler Tine PA-01679 3513201 1 x M20 Nut 69-20
22 Under Furrow Subsoiler Guard RH
- Under Furrow Subsoiler Guard LH
PA-01679BRH 3513202
PA-01679BLH 3513203
LEMKEN
C40 & W52 Bodies
1 Mouldboard RH (C40 ONLY)
PA-05848RH 3441140 10 x M10 x 35mm & PA-0094210
- Mouldboard LH (C40 ONLY) PA-05848LH 3441141 1 x M10 x 40mm PA-0094310
1 Mouldboard RH W52 ONLY PA-05869RH 3441240 7 x M10 x 35mm & PA-0094210
- Mouldboard LH W52 ONLY PA-05869LH 3441241 1 x M10 x 40mm PA-0094310
2 Mouldboard Tailpiece RH PA-05843RH 3476000 1 x M10 x 30mm & PA-0094110
- Mouldboard Tailpiece LH PA-05843LH 3476001 1
3 Shin RH
- Shin LH
4 Tungsten Carbide Shin RH AG-05845RH 3451004 3 x M10 x 35mm PA-0094210 - Tungsten Carbide Shin LH AG-05845LH 3451005
5 30/35cm Wing RH
- 30/35cm Wing LH
5 40cm Wing RH
- 40cm Wing LH
6 Tungsten Carbide 40cm Wing RH
- Tungsten Carbide 40cm Wing LH
5 18” Wing RH
- 18” Wing LH
6 Tungsten Carbide 18” Wing RH
3352030 2 x M12 x 40mm PA-0095210
- Tungsten Carbide 18” Wing LH AG-18016 3352031 2 x M12 x 40mm PA-0095210
7 Reversible Point RH 12mm Thick
PA-05808ARH 3365540 1 x M12 x 35mm & PA-0095110
- Reversible Point LH 12mm Thick PA-05808ALH 3365541 1 x M12 x 50mm PA-0095410
8 3 Hole Share Point RH
- 3 Hole Share Point LH
8 Point Hardfaced RH 3 Hole
- Point Hardfaced LH 3 Hole
9 Tungsten Carbide Point RH 3 Hole
- Tungsten Carbide Point LH 3 Hole
10 Tungsten Reinforced Carbide Point RH
PA-05846RH 3364054 2 x M12 x 35mm PA-0095110
PA-05846LH 3364055 2 x M12 x 35mm PA-0095110
PA-05863RH 3364150 2 x M12 x 35mm PA-0095110
PA-05863LH 3364151 2 x M12 x 35mm PA-0095110
AG-05846RH 3364054 2 x M12 x 40mm PA-0095210
AG-05846LH 3364055 2 x M12 x 40mm PA-0095210
AG-05846RRH 3364054 2 x M12 x 40mm PA-0095210
- Tungsten Reinforced Carbide Point LH AG-05846RLH 3364055
landside 480 x 120
13 Tungsten Carbide Landside
3411504 2 x M12 x 35mm PA-0095110
14 Landside W52 PA-05885 3411525 1 x M16 x 45mm &
(single) PA-0095110
15 Tungsten Landside RH AG-05885RH 3411525 1 x M12 x 35mm & PA-0095110 - Tungsten Landside LH AG-05885LH 3411525 1 x M16 x 45mm PA-0088710
16 Wide Landside W52
3411460 2 x M12 x 35mm PA-0095110
17 Knife Coulter RH PA-05840RH 3492890 2 x M10 x 30mm
3401481 1 x Bolt PA-05864 (single)
19 Landside Wedge RH
3401900 2 x M10 x 30mm PA-0094110
- Landside Wedge LH PA-05833LH 3401901 2 x M10 x 30mm PA-0094110
20 Tungsten Carbide Landside Wedge RH
- Tungsten Carbide Landside Wedge LH
3401900 2 x M10 x 30mm PA-0094110
3401901 2 x M10 x 30mm PA-0094110
21 Landside Wedge W52 PA-05886 3401903 2 x M10 x 30mm PA-0094110
22 Tungsten Landside Wedge RH
- Tungsten Landside Wedge LH
AG-05886RH 3401903 2 x M10 x 30mm PA-0094110
AG-05886LH 3401903 2 x M10 x 30mm PA-0094110
23 Landside Protector PA-05871 3401490 2 x M12 x 35mm PA-0095110
24 Reversible Furrow Splitter PA-01207
25 Under Furrow Subsoiler Tine PA-01679 3513201 1 x M20 Nut 69-20
26 Under Furrow Subsoiler Guard RH
- Under Furrow Subsoiler Guard LH
PA-01679BRH 3513202
PA-01679BLH 3513203
Bodies
to fit B25, B25H & CD Bodies
1 Mouldboard RH (CD Only)
- Mouldboard LH (CD Only)
2 Mouldboard Tailpiece
- Mouldboard Tailpiece
3 Shin RH (B25H Only)
- Shin LH (B25H Only)
4 Tungsten Carbide Shin RH
- Tungsten Carbide Shin LH
3 Shin RH (B40 Only)
- Shin LH (B40 Only)
5 12" Wing (30/35cm) RH
- 12" Wing (30/35cm) LH
5 16" Wing (40cm) RH
- 16" Wing (40cm) LH PA-05831LH 3352021
5 Tungsten Carbide 16" Wing RH
- Tungsten Carbide 16" Wing LH AG-05831LH 3352021 2 x M12 x 40mm PA-0095210
5 18” Wing R/L PA-18015 3352030 2 x M12 x 35mm PA-0095110
- 18” Wing R/L PA-18016 3352031 2 x M12 x 35mm PA-0095110
6 Tungsten Carbide 18” Wing RH AG-18015 3352030 2 x M12 x 40mm PA-0095210
- Tungsten Carbide 18” Wing LH AG-18016 3352031 2 x M12 x 40mm PA-0095210
7 3 Hole Share Point RH
PA-05846RH 3364054 2 x M12 x 35mm PA-0095110
- 3 Hole Share Point LH PA-05846LH 3364055 2 x M12 x 35mm PA-0095110
7 Point Hardfaced RH 3 Hole PA-05863RH 3364150 2 x M12 x 35mm PA-0095110
- Point Hardfaced LH 3 Hole PA-05863LH 3364151 2 x M12 x 35mm PA-0095110
8 Tungsten Carbide Point RH
AG-05846RRH 3364054 2 x M12 x 40mm PA-0095210
- Tungsten Carbide Point LH AG-05846LRH 3364055 2 x M12 x 40mm PA-0095210
9 Tungsten Reinforced Carbide Point RH
- Tungsten Reinforced Carbide Point LH
10 Reversible Point RH 12mm Thick
AG-05846RRH 3364054 2 x M12 x 40mm PA-0095210
AG-05846RLH 3364055 2 x M12 x 40mm PA-0095210
PA-05808ARH 3365540
x M12 x 35mm & PA-0095110 - Reversible Point LH 12mm Thick
3365541 1 x M12 x 40mm PA-0095410 11 Frog Protector RH
PA-05862RH 3401480 1 x M16 x 110mm PA-05864 (single) - Frog Protector LH PA-05862LH 3401481 1 x M16 x 110mm PA-05864 (single) 12 Landside PA-05834 3411504 2 x M12 x 35mm PA-0095110
3
4
5 20" Tungsten Wing RH
- 20" Tungsten Wing LH
6 Hardfaced Point RH (Conversion adaptor required) PA-05863RH 3364150 2 x M12 x 35mm PA-0095110
- Hardfaced Point LH (Conversion adaptor required) PA-05863LH 3364151 2 x M12 x 35mm PA-0095110
7 Tungsten Carbide Point RH (Conversion adaptor required)
- Tungsten Carbide Point LH (Conversion adaptor required)
8 Tungsten Reinforced Carbide Point RH (Conversion adaptor required)
AG-05846RRH 3364054 2 x M12 x 40mm PA-0095210
AG-05846LRH 3364055 2 x M12 x 40mm PA-0095210
AG-05846RRH 3364054 2 x M12 x 40mm PA-0095210
- Tungsten Reinforced Carbide Point LH (Conversion adaptor required) AG-05846RLH 3364055 2 x M12 x 40mm PA-0095210
9 Q/F Reinforced Point RH PA-05847RH 3364156
- Q/F Reinforced Point LH PA-05847LH 3364157
14 Q/F Conversion Washer PA-05847W
10 Reversible Landside RH / LH
11 Tungsten Landside RH
- Tungsten Landside LH
3411525 1 x M12 x 35mm & 1 x M16 x 45mm
3411525 1 x M16 x 45mm PA-0088710
12 Landside Wedge PA-05886 3401903 2 x M10 x 30mm PA-0094110
13 Tungsten Landside Wedge RH AG-05886RH 3401903 2 x M10 x 30mm PA-0094110
- Tungsten Landside Wedge LH AG-05886LH 3401903 2 x M10 x 30mm PA-0094110
1
Disc & Skimmers
BP233 & OS Slatted Bodies
1
8 Tungsten Carbide Reinforced Point
Share SSP332 LH
BP350 & BP330 Bodies
Tungsten Carbide Reinforced Point LH
Parts
1
3 Skim
Vogel & Noot WS350 & WY350 Bodies
3
4
Vogel & Noot
VOGEL
Vogel & Noot / AMAZONE
terms and conditions
1. Definitions
In these conditions the following expressions have meanings respectively shown against them: the seller is Pan Anglia (Country Merchants)
Limited: the buyer is the person, firm or corporation whose name and address appear on the order invoice of sale or other document: the goods are the goods described on the order invoice bill of sale or other document.
2. Exclusion of certain conditions
Unless otherwise agreed in writing by the seller these conditions which supersede any earlier sets of conditions appearing in seller’s catalogues or elsewhere shall override any terms or conditions stipulated, incorporated or referred to by the buyer whether in the order or in any negotiations and all guarantees or warranties or conditions (including any conditions as to quality or fitness for any particular purpose) whether express or implied by statute common law or otherwise are excluded and hereby negatived.
3. Terms
All quotations are strictly net cash against invoice unless otherwise stated and are exclusive of Value Added Tax or any similar taxes levies or duties.
4. Goods supplied to specification
All parts listed are supplied to fit the machine indicated and are not sold as genuine parts. The goods are supplied in accordance with our catalogues, the specification (if any) submitted to the buyer and any additions and alterations shall be subject to extra charge. Any parts not specified shall be accordance with the sellers printed catalogue or the catalogues of the sellers suppliers (subject to any modifications made since publication). If the seller adopts any changes in construction or design of the goods or the specification thereof, the buyer shall accept the goods so changed in fulfillment of the order.
5. Price
The quoted price for the goods may be varied by additions upwards by the seller in accordance with market conditions at the date of actual supply and the buyer shall pay such additions in addition to the quoted price. Without prejudice to the generality of the foregoing market conditions shall include any increase in the cost in labor and/or materials operation and/or transport.
6. Carriage
The seller will (except where alternative arrangements are made with the buyer) deliver the goods to the place nominated by the buyer on the order form. The price quoted to the buyer is ex-depot and a charge for delivery will be made (subject to condition 5 hereof).
7. Time for delivery
Any time or date named by the seller for delivery is given and intended as an estimate only and the seller shall not be liable to make good any damage or loss whether arising directly or indirectly out of delay in delivery.
8. Buyer to accept delivery
Delivery shall be taken by the buyer within the period (if any) named in the quotation or order and such full details as may be necessary (or required by the seller) to enable the seller to complete delivery within such period shall be supplied by the buyer. If for any reason the buyer is unable to accept delivery for the goods at the time when the goods are due and ready for delivery the seller shall if its storage facilities permit store the goods and take all reasonable steps to prevent their deterioration until their actual delivery and the buyer shall be liable to the seller for the reasonable cost (including insurance) of its doing so. This provision shall be in addition to not in substitution of any other payment or damages for which the buyer may become liable in respect of his failure to take delivery at the appropriate date.
9. Replacement of faulty goods
9a Subject as is hereinafter provided the seller will replace at its own cost all goods of its own manufacture which are or become faulty by reason only of the use of defective materials or by reason of defective workmanship within a period of 12 calendar months from the date of supply provided that the buyer has notified the seller in writing of the fault in that period but the seller will no be liable for any damage or injury (weather direct or indirect) caused to the buyer or the person’s authorized or permitted by him to operate use or come in contact with the goods or to animal’s goods produce or other property due to such faults or defects.
9b The seller shall not be liable to replace or repair free of charge any goods not manufactured by it which are or become faulty by reason of defective materials or by reason of defective workmanship and the seller will not be liable for any damage or injury (weather direct or indirect) caused to the buyer or persons authorized or permitted by him to operate use or come into contact with goods or to animals goods produce or other property due to such faults or defects but in the event that any such goods are supplied to the seller with the benefit of any such guarantees or warranties given by the manufacturers then, so far as it legally can, the seller will use it’s best endeavors to pass on the benefit of such guarantees or warranties to the buyer.
The seller’s liability under clause 9a or 9b or these conditions shall cease if: (a) The buyer shall not have paid in full all invoices for goods supplied by the seller; (b) The seller’s representatives are denied full and free right of access to the goods; (c) The buyer permits persons other than the seller or those approved or authorized by the seller to effect any replacement of parts maintenance adjustment or repairs to the goods; (d) The buyer uses any spare parts or replacements not manufactured by or on behalf of the seller and supplied by it or fails to follow the seller’s
and/or the actual manufacturer’s instructions for the use of the same 10. Goods damaged or lost in transit
The seller will repair or replace (where actual replacement is possible but not otherwise) free of charge goods damaged or lost in transit where such goods are transported by the seller or its contractor or agent provided the buyer gives the seller written notification of such damage or loss within such time as will enable the seller to comply with the carrier’s conditions of carriage within seven days from the date of dispatch as affecting loss or damage in transit.
11. Collection of goods for return
Where the company had agreed to uplift goods under Clause 9 or Clause 10 of these conditions or for any other reason the buyer will make such goods ready and available for collection. Where goods have been correctly supplied, a handling charge will be made. Where goods are not made ready or the goods are not available for collection when called for a charge will be raised for each and every abortive journey made
12. Goods specially ordered
Any item obtained and/or supplied against the specific order of the buyer which does not appear in the Pan Anglia catalogue cannot be returned for credit
13. Determination
If the buyer shall make default in or commit any breach of any of his obligations to the seller or if any distress or execution shall be levied upon the buyer his property or assets or if he (the buyer) shall make or offer to make any arrangements or composition with creditors or commit any act of bankruptcy, or it any petition or receiving order in bankruptcy shall be presented or made against him, or if the buyer shall be a limited company and any resolution or resolution to wind up such company’s business shall be passed or presented otherwise then for reconstruction or amalgamation, or if a receiver of such company’s undertaking property or assets or any part thereof shall be appointed the seller shall have the right forthwith to determine any order subsisting and upon written notice of such determination being posted by if to the buyer’s last known address any subsisting order shall be deemed to have been determined without prejudice to any claim or right the seller might otherwise make or exercise.
14. Suspension of deliveries
Should default be made by the buyer in paying any sum due under any order as and when if becomes due the seller shall have the right either to suspend all further deliveries until the default be made good or to cancel the order so fur us any goods remain to be delivered thereunder.
15. Partial completion
In the case of partial completion of an order, the seller shall be entitled to a quantum merit in respect of all work done by it without prejudice to its rights should non completion be occasioned by the buyer.
16. Force majeur
In the event of war invasion act of foreign enemy hostilities (whether war has been declared or not) civil war rebellion revolution insurrection or military or usurped power the seller shall be relieved of liabilities incurred under this contract wherever and to the extent to which the fulfillment of such obligations is prevented frustrated or impeded as a consequence of any such event or by any statute rules regulations orders or requisitions issued by any government department council or other duly constituted authority or from strikes lockouts break- down of plant or any other causes (whether or not of a like nature) beyond the sellers control.
17. Sub-contracting
The seller reserves the right to sub-contract the fulfillment of the order (including any installation (or any part thereof).
18. Law applicable
The conditions and the contracts shall be subject to and construed in accordance with English law.
19. Retention of title
19a Notwithstanding delivery of the goods or any of them and the passing of risk in respect of them to the buyer upon delivery title to the goods (in their unmixed state weather or not the goods have been transformed into a different shape) shall not pass from the seller to the buyer unless and until the buyer has paid to the seller the price & any other sums due in respect of the goods.
19b Pending such payment and passing of title it is hereby agreed and acknowledged as follows (a) The buyer shall hold the goods on behalf of and to the order of the seller and shall accept delivery and be is possession of them only in such capacity and on and subject to the terms and conditions herein contained. (b) The buyer shall take all reasonable care of the goods and shall be solely accountable to the seller for any loss or damage suffered in respect of them whilst the same are in his possession or under his control. (c)
The buyer shall at all times store the goods in such a manner as shall facilitate identification of them. (d) The buyer shall hold the proceeds of any resale of the goods on behalf of the seller and retain such proceeds separately and account to the seller thereof.
19c The buyer hereby grants the seller a right of entry to his premises for the purpose of taking possession of and removing goods in which property remains in the seller.
19d In the event of a trustee in bankruptcy a receiver or a liquidator being appointed in respect of the buyer then in any such case the buyer shall ensure that such trustee in bankruptcy receiver or liquidator is made fully aware of and shall respect and hold the goods or the proceeds of resale (as the case may be) subject to the sellers rights of retention of title and otherwise as expressly reserved hereunder.
20. Drawings etc.
Drawings illustrations descriptive matter specifications weights dimensions or other particulars appearing in any document issued by the seller are approximate and subject to modification.
