MX TX 400 ENG

LOADERS

TX400 series MX TX420 MX TX425 MX TX430

3 models for tractors

TX400 series

with engines over 170 hp

EXTRAORDINARY PERFORMANCE

MX TX420

MX TX425

MX TX430

170 to 400 hp / 6 cyl

200 to 400 hp / 6 cyl

250 to 400 hp / 6 cyl

7000 kg

8000 kg

9250 kg

MIN. WHEELBASE

2800 mm

2900mm

3000 mm

MIN. HYDRAULIC FLOW RATE

110 l/min

110 l/min

110 l/min

5.10 m

5.10 m

5.50 m

TRACTOR

POWER / NO. OF CYLINDERS MIN. WEIGHT

LIFTING HEIGHT Maximum height at implement pivot* 1

Max. height under horizontal bucket

4.80 m

4.80 m

5.20 m

2

Max. height under dumped bucket#

3.68 m

3.68 m

4.14 m

WORKING ANGLES 3

Dumping angle at full height#

50 °

50 °

45 °

4

Crowd angle at ground level#

48.5°

48.5 °

50.5 °

FORWARD REACH# UP / DOWN 6

0.97 m / 2.10 m

0.97 m / 2.10 m

0.95 m / 2.37 m

0.15 m

0.15 m

0.15 m

LIFT FORCE AT IMPLEMENT PIVOT, GROUND LEVEL*

3650 kg

4100 kg

4100 kg

LIFT CAPACITY AT IMPLEMENT PIVOT OVER THE ENTIRE LIFTING RANGE*

3250 kg

3650 kg

3650 kg

At ground level:

3250 kg

3700 kg

3700 kg

2 m from the ground:

3200 kg

3650 kg

3650 kg

At 3 m from ground level

3050 kg

3450 kg

3450 kg

Max. height:

2750 kg

3200 kg

3200 kg

LIFTING TIME

7.5 s

8.3 s

9s

DUMPING TIME

1.5 s

1.5 s

1.5 s

1180 kg

1200 kg

1280 kg

5

DIGGING DEPTH

PAYLOAD CAPACITY ON PALLET AT 600 MM OUT ON FORKS

WEIGHT WITHOUT EQUIPMENT

Specifications determined at 210 bar pressure and 80 litres/min flow rate.

Values may vary according to type of tractor used and may be subject to change without notice. * *Only usable loads apply. The figures at ground level and at the implement pivot axis are not to be used. # Figures provided for a high capacity bucket BC HD, Euro hitching. Front range given on Claas AXION 800.

TX 430 3

2 1

4 5

2 6

6

3

R A I S E Y O U R E X P E C TAT I O N S

E X C L U S I V E TO M X

TX400, THE EXCEPTION: EXTREME SPECIFICATIONS TO ACHIEVE EXCELLENCE

THE HYDRAULIC COMPENSATION PARALLELOGRAM - patented

The bucket angle is automatically retained by two hydraulic compensating rams, perfectly integrated and permanently linked with the dumping rams.

SUPERIOR POWER The pressure in the dumping rams, generated by the weight in the implement, is transferred to the compensating rams and boost lifting ram power.

The PCH System® increases the real lifting capacity: up to 35% more power without requiring additional energy (pressure, flow rate).

PANORAMIC VISIBILITY The loader is specifically designed to allow hydraulic circuit integration.

The parallelogramm rams are positioned in such a way to prevent any obstruction of the field of vision above the loader arms.

OPTIMAL LINKAGE Parallelogram by hydraulic compensation MX (PCH); allows you to obtain market leading crowd angles. Materials remain in the bucket no matter what the lift position of the loader.

4

LIFTING RAM POWER The lifting rams are powered via rigid pipes to protect them from impacts, avoiding all maintenance costs throughout the loader’s lifespan.

TX400 Series EXCLUSIVE FEATURES

PIVOT POINTS - ARCOR treated pins - Protected grease nipples - Bushes with lubrication system - Pin plate anti-rotation locking system

ARM DESIGN The arm structure links two ÂŤUÂť shaped profiles made of 6 mm thick HLE steel with and assembled width of 100 mm. This design guarantees incomparable resistance and endurance.

DUMPING RAMS The TX400 loader is equipped with dual rod dumping rams which provide an implement dumping speed equal to the crowding speed, thereby enabling faster manoeuvres.

HYDRAULIC DESIGN All hydraulic parts are protected by the arm.

This therefore makes it possible to generate visibility.

All the hydraulic power lines are rigid. The hydraulic unit comprising the suspension, the 3rd and 4th functions are protected by the front and rear housing on the loader cross-beam.

IMPLEMENT CARRIERS The TX400 loader has a modular implement carrier fitted as standard with FAST-LOCK hydraulic locking system.

According to the chosen model, it is possible to hitch material handler implements (see following page).

5

EQUIPMENT Instant coupling of tractor to loader hydraulics and electric lines - patented Simple MACH System® offers simple and safe connection of all hydraulic and electric lines. Even pressurized, the connection is simple and effortless.

Clean MACH System® includes NS flat face couplers which remove any risk of pollution in the hydraulic lines and the environment.

Instant hydraulic connection loader implement Strong, reliable and very easy-to-use, it enables all couplings to be connected simultaneously in one simple action, even under pressure.

MACH 2 System® also includes NS flat face couplers which remove any risk of pollution in the hydraulic lines and the environment.

The MACH 2 box is conveniently located on the carrier to avoid any wearing of hoses between the implement and the loader.

Engage

Pull down the lever

It’s locked !

Shock absorber The TX loader benefits from two absorbers with a different setting for optimum efficiency both when empty and loaded.

Comfort in the cab Driving is smoother. The driver in the cab does not feel any jolting.

The SHOCK Eliminator can be deactivated electrically from the cab.

Versatile Implement carrier As standard, hitch or unhitch your implement without leaving your seat (Fast Lock System): Use your telescopic handler implements easily.

JCB Q-FIT

TX425 & MANUBAL V7000

6

EURO

MANITOU

TX430 & BMSA 280MT

MERLO

ELECTRONIC CONTROL The only control system including direct and progressive 3rd function operation and combined movements (lifting + dumping + 3rd function).

INNOVATION

DIRECT CONTROL JOYSTICK > DIRECT AND PROGRESSIVE 3RD FUNCTION The Direct Control Joystick is fitted into the top of the monolever and provides 2 control axes allowing a simple thumb movement to directly and progressively activate both the 3rd AND 4th functions.

> COMBINED MOVEMENTS M X I N N O V A T I O N The e-Pilot system is the only control system designed specifically for the rapid combination of up to 3 movements. Consequently it is possible to control both dumping and the 3rd function at the same time with no loss of speed.

AUTO-UNLOAD System

AUTO-LEVEL System

> AUTOMATED FUNCTIONS The AUTO-UNLOAD System allows a load to be emptied by opening the grab and tipping the bucket at the same time. The AUTO-LEVEL System then automatically returns the bucket to the horizontal position.

> E-Pilot predisposition for direct and progressive 3rd/4th function,

AUTO-UNLOAD, AUTO-LEVEL System, automatic implement shaking, continuous 3rd function, dumping restrictor and the series’ integrated 3F/4F functions.

TX430 & BCA 280M

TX430 & BCA 280M

7

RAISE YOUR EXPECTATIONS

EN

Photo credits: © MX - 02/2019

19, rue de Rennes B.P. 83221 FR-35690 ACIGNÉ Tel.: +33 (0)2 99 62 52 60 Fax: +33 (0)2 99 62 50 22 Email: contact@m-x.eu Website: www.m-x.eu