Dustmatic 2000 User Manual

User Manual

DustMatic 2000

Dust Extraction Drawer

BRACON Dental & Medical Products

Installation: Install the chassis:



Push the holding chassis backwards



Press the right bolt downwards with your right hand and the left one upwards with your left hand



Pull-out the Dust Extraction Drawer from the telescopic rails



Use the six screws that supplied with the Dust Extraction Drawer



Screw the chassis underneath the working bench



Carefully push back the Dust Extraction Drawer into the telescopic rails

Operation:



Insert the micro-motor into the rear MICROMOTOR OUTLET , connect the Dust Extraction Drawer to the MAIN INPUT socket ,and active the main switch to ON

MANUAL and AUTOMATIC options: Attention If you stop working overnight or longer, set the switch OFF MANUAL option: 

When the switch is on MANUAL position , the Dust Extraction Drawer is on continuous service

AUTOMATIC option:  

When the switch is on AUTOMATIC position ,the Dust Extraction Drawer start automatically as soon as you activate the micromotor In order to avoid brief interruption, an approx. 20 second drift time is set at works

Remark: 

The electronic automatic starter fits most micro motors. If yours does not automatically switch your Dust Extraction Drawer ON and OFF , it can be adjust from the electronic printed circuit board Open two screws at the rear, remove the electronic power drawer and adjust the micro motor sensitivity by the potentiometer

Maintenance Maintenance

Please disconnect the drawer from the mains while performing any maintenance Please disconnect the drawer from the mains while performing any The Dust Extraction includes a large filter bag for micro-dust particles, clean maintenance the filer once a month and if necessary replace it by a new one Please disconnect the drawer from the mains while performing any The Dust Extraction includes a large filter bag for micro-dust particles, clean maintenance the filer once a month and if necessary replace it by a new one The Dust Extraction includes a large filter bag for micro-dust particles, clean Clean or replace the filter the filer once a month and if necessary replace it by a new one

Clean or replace the filter Clean or replace the filter 

Open the fasteners at the both sides of the beech wood plate



Open the fasteners at the both sides of the beech wood plate Open the fasteners at the both sides of the beech wood plate





Lift the plate



Lift the plate



Lift the plate



Press on both sides of the clips ,take the filter out and clean or replace it by a new one

BRACON Dental & Medical Products

Bracon Limited • Unit C • Swife Business Park • Burwash Road • Broad Oak • Heathfield • East Sussex TN21 8UP t: +44 (0)1580 817000 e: sales@bracon.co.uk w: bracon.co.uk