Keyprint 3D Resins Brochure

®

BRACON Digital Dental Products

What Dental Professionals Think of KeyPrint® “Keystone’s are the highest quality materials we have seen, and we are eagerly integrating them into our digital workflow.”

— JAY COLLINS, OWNER OF CORNERSTONE DENTAL LABS

“We’ve been receiving great feedback from dentists that KeySplint Hard is surviving even the most severe bruxers.”

— CHRIS KABOT, VICE PRESIDENT, RESEARCH AND DEVELOPMENT AT AFFORDABLE CARE

“KeyGuide® resin is a perfect fit for our laboratory. The material prints quickly and accurately in our 3D printer and polishes to a beautiful high luster shine. Our doctors are loving it!”

— KEN KINCAID, CDT, RG, TE

“KeySplint Soft® has the unique ability to change flexural properties over the temperature range of the indicated uses. These dynamic properties add a unique characteristic that should extend the life of the splint device by preventing the degradation due to brittle fracture.”

— MARK LATTA, DMD, MS

Index What Dental Professionals Think of KeyPrint®

2

Our KeyPrint® Journey

4

Biocompatible Medical Device Resins

6

KeySplint Soft®

8

KeySplint Hard®

12

KeyDenture Try-In™

14

KeyGuide®

16

KeyTray™

18

KeyOrtho IBT™

20

KeyPrint Workflow Validation & Open Source Philosophy

22

Laboratory Resins

26

KeyModel Ultra™

28

KeyModel®

30

KeyOrthoModel®

32

KeyMask®

34

KeyCast®

36

Accessories

38

KeyVest™

40

Finishing and Polishing Materials

42

KeyPrint® Kit Accessories & Compatible Products

44

KeyPrint® Compatible

46 K EY PRI NT 3

Our KeyPrint Journey In an industry that is increasingly defined by the ability to innovate, adapt, and produce consistent results, Keystone Industries introduced KeyPrint in 2018, a line of precision 3D resins specifically formulated for the dental industry. Keystone has combined its unique blend of dental and photopolymer expertise to deliver the highest quality 3D printing resins to the dental market.

Entirely designed and produced in the USA, the full KeyPrint line is available throughout North America, Europe, and other global territories. KeyPrint resins are compatible with DLP, LED and LCD printers (wavelengths of 385-405 nm). Keystone is profiling 3D printers on an ongoing basis to ensure our KeyPrint resins work reliably in multiple open-source printers.

Prioritizing patient safety, KeyPrint resins are subjected to a battery of biocompatibility tests in accordance with global regulatory standards. Each biocompatible print complies with international standards to ensure efficacy and effectiveness for the patient. KeyPrint’s robust formulations guarantee a 3-year shelf life, along with color stability.

Keystone Industries, in collaboration with Henkel Corp., will continue to develop hi-tech 3D solutions for the dental industry.

110+

YEAR S IN DENTAL

30

YEARS AS A MANUFACTURER OF PHOT OPOLY MERS

4 KEYP R I NT

®

K EY PRI NT 5

Bio S A FE AN D E FFE CTI VE

Biocompatible Medical Device Resins 6 KEYP R I NT

K EY PRI NT 7

FDA 510K CLEARED | CE MARKED (CLASS IIa) | HEALTH CANADA LICENSED AVAILABLE IN THE USA, CANADA, EU, AUS AND OTHER GLOBAL TERRITORIES

“I honestly believe this will change printed splints forever. It has unbelievable fracture resistance and mind blowing elastic memory.” — JAY PATRICK, DENTAL DEVICES BY JASON Utilizing unique technologies, Keystone Industries has developed a one-of-a-kind 3D printing resin for the fabrication of flexible, durable dental splints and nightguards. This DLP-optimized resin is an exceptional printing material that combines the strength needed to protect teeth against disorders like bruxism, with added flexibility for better patient comfort.

VI EW O U R KEYS PLINT SO F T VI DEO !

# 4200005 (0.5kg bottle) # 4 2 2 0 0 0 5 (1kg bottle) *Currently available from multiple dealers. Please contact us!

Bio BIOCOMPATIBLE 8 KEYP R I NT

STRONG

FLEXIBLE

EASY TO POLISH

EASILY CLEANED

KeySplint Soft

®

Revolutionizing Night Guard and Splint Technology

2

0

2

F EA TU RES • STRONG & FLEXIBLE; NOT BRITTLE • B I O C O M PA T I B L E M E D I C A L D E V I C E • TRANSLUCENT • UNIQUE TECHNOLOGY • B PA , M M A & PH T H A L A T E F R E E

P ROPERTY

P RO C E D URE

KE Y S P L I N T SO FT

Ultimate Flexural Strength

ISO 20795-2

2.6–4.4 MPa

Flexural Modulus

ASTM D790

1356

Tensile Strength

ASTM D638

52

Young’s Modulus Tensile

ASTM D638

1790

Water Sorption

ISO 20795-2

< 18 ug/mm3

Elongation at Break

ASTM D638

110%

Biocompatibility

ISO 10993-1 and USP Class VI

Pass

K EY PRI NT 9

0

Doctors are loving KeySplint Soft® for their patients and their practice!

“KeySplint Soft offers unmatched durability and patient comfort. Combine that with the faster turnaround and easy replacement for night guard/splint fabrication, and you’ve got a solution that will have doctors wondering how they ever managed to practice without it.”

— DR. BRANDON OWEN, OWEN ORTHODONTICS LLC, LAKEWAY, TX

“KeySplint Soft’s unique thermoplastic features allow me to design guards that are snug but the patient loves the comfortable feel.”

— MICHAEL D SCHERER, DMD, MS, APC & MELISSA D SHOTELL, DMD, MS, SONORA, CA

CHECK OUT OUR INDEPDENDENT WEAR STUDY!

1 0 KEYP R I NT

STRONG YET FLEXIBLE; NOT BRITTLE

Combines strength needed to protect teeth with added flexibility for better patient comfort.

HIGHLY PRECISE DEVICES

Precise, strong and smooth finished parts.

Limited remakes and repairs can be done quickly if needed, saving time for doctors!

EASILY CLEANED AND MAINTAINED

Easily cleaned by the patient.

ELASTIC MEMORY FOR EASY PLACEMENT

KeySplint Soft can be warmed in water for easy placement and minimal chairside adjustments, saving time for doctors!

K EY PRI NT 1 1

FDA 510K CLEARED | CE MARKED (CLASS IIa) | HEALTH CANADA LICENSED AVAILABLE IN THE USA, CANADA, EU, AUS AND OTHER GLOBAL TERRITORIES

“The KeySplint Hard material exhibited excellent wear resistance- equal to the lab processed Lucitone 199.

Further the wear pattern suggests excellent wear resistance without tearing or cracking, suggesting excellent resistance to fatigue failure.” — DR. MARK A. LATTA, DMD, MS

# 42000 0 4 ( 0 .5 k g b o tt l e) # 42200 0 4 ( 1 k g bo t tl e)

Bio BIOCOMPATIBLE 1 2 KEYP R I NT

DURABLE

EASY TO POLISH

EASILY CLEANED

ABRASION RESISTANT

KeySplint Hard ™™ ®

2

The newest member of the KeySplint family, KeySplint Hard is designed

0

2

1

for rigid dental splints. KeySplint Hard provides therapy for bruxism and cases where tooth immobilization is needed.

F E A T U RE S • BIO C O M P A TIBLE M EDIC AL D E V I C E • U N ITED S TA TES F DA 51 0 (K ) C L E AR E D • H EA LTH C A N A DA LIC ENS E D • C E M A R K ED ( C LA S S IIA ) • H A R D F O R R IG ID S P LINT S • BP A , M M A & P H TH A LA T E F R E E

PROCEDURE

KEYSPLINT HARD

Flexural Strength (MPa)

ISO 20795-2

60-65 MPa

Flexural Modulus (MPa)

ISO 20795-2

1510-1600 MPa

Water Sorption

ISO 20795-2

18 μg/mm3

Elongation at Break

ASTM D638

9%

Biocompatibility

ISO 10993-1

Pass

PROPERTY

K EY PRI NT 1 3

Class I

AVAILABLE IN THE USA COMING SOON IN THE EU, CANADA, AND OTHER GLOBAL TERRITORIES

A1

# 42004 0 1 ( 0 .5 k g b o tt l e) # 42204 0 1 ( 1 k g bo t tl e)

B1

# 42004 0 6 ( 0 .5 k g b o tt l e) # 42204 0 6 ( 1 k g bo t tl e)

B L4

# 42004 2 0 ( 0 .5 k g b o tt l e) # 42204 2 0 ( 1 k g bo t tl e)

Bio BIOCOMPATIBLE 1 4 KEYP R I NT

COST EFFECTIVE

EXCEPTIONAL SURFACE

KeyDenture Try-In™™™ KeyDenture Try-In takes the uncertainty out of the denture fitting process. Designed for precision and efficiency, KeyDenture Try-In is a photopolymer resin indicated for 3D printing of biocompatible, short-term trial dentures, intended for evaluation of fit, occlusion, esthetics, and phonetics during try-in appointments.

F E A TU RE S • C O S T E F F E C T I V E F O R T RY-IN D EN T U RES • E X C E PT I O N A L S U R F A C E QU A L IT Y • EASY TO CHARACTERIZE • PO L I S H E S T O H I G H L U ST ER • B I O C O M PA T I B L E M E D I C A L D EV ICE • W I D E V A R I E T Y O F K E Y P RIN T C O M PA T I B L E W O R K F L OW S • B PA , M M A & PH T H A L A T E F REE

PROPERTY

PROCEDURE

KEYDENTURE TRY-IN

Flexural Strength (MPa)

ASTM D790

56-68 MPa

Flexural Modulus (MPa)

ASTM D790

1500-1750 MPa

Water Sorption

ISO 20795-1

9-13 μg/mm3

Elongation at Break

ASTM D638

30-43%

Biocompatibility

ISO 10993-10

Pass

K EY PRI NT 1 5

AVAILABLE IN THE USA, CANADA, EU, AUS AND OTHER GLOBAL TERRITORIES

“When we tested this material in the beginning, I was surprised. It prints really well and the fit was very precise. It was really easy to use. We are definitely impressed with it. We will no longer be outsourcing our surgical guides.” — JESSICA BIRRELL, CDT

Class I #4200001 (0.5kg bottle) #42200 0 1 (1kg bottle)

V IEW O UR STERILIZ A T I ON PR OTOC OL !

Bio BIOCOMPATIBLE 1 6 KEYP R I NT

STRONG

EASY TO POLISH

AUTOCLAVABLE

KeyGuide ™ ®

KeyGuide is ideal for fabricating transparent and stable surgical guides, which enable the placement of implants at a precise angle and depth.

F E A T U RE S • S TR O N G • BIO C O M P A TIBLE M EDIC A L DEV I C E • EA S Y TO P O LIS H • A UTO C LA VA BLE A N D C O LO R S T AB L E • BP A , M M A & P H TH A LA TE F R EE

Photos courtesy of August De Oliveria, DDS.

Flexural Modulus (MPa)

FLEXURAL MODULUS (MPa)

1400

Competitor A

Competitor C

Competitor B

Competitor H

1500

1600

1700

KeyGuide

Competitor E

1800

Competitor F

Competitor G

Competitor D

2000

2100

2200

1900

2400

Flexural Strength (MPa)

F L E X U R A L S T R E N G T H ( MP a ) Competitor A Competitor B

50

KeyGuide

Competitor C Competitor E Competitor D Competitor F Competitor G Competitor H

55

60

65

70

75

80

85

90

95

100

105

K EY PRI NT 1 7

AVAILABLE IN THE USA, CANADA, EU, AUS AND OTHER GLOBAL TERRITORIES

Class I #4200007 (0.5kg bottle) #4220007 (1kg bottle)

Bio 1 8 KEYP R I NT

BIOCOMPATIBLE

IMPRESSION ACCURACY

STRONG

KeyTray

™™™ F E A T U RE S

KeyTray is a strong, biocompatible (Class I)

• BIOCOMPAT IBL E ME DICAL DE VICE

3D printing resin designed to create

• NO PR E L IMINAR Y CAS T R E QUIR E D

customized, individual impression trays quickly and with precision. The material is strong

• S AVE S T IME BY E L IMINAT ING S T ONE MODELS

and durable to withstand the forces of taking a

• IMPR OVE D IMPR E S S ION ACCUR ACY

patient impression and removing the tray from

• COMPOUND WAXE S AND BOR DE R MOLDING

the oral cavity. It is compatible with all types of impression material.

P R OP ER T Y

MAT E R IAL S WIL L ADHE R E T O T R AY • BPA, MMA & PHT HAL AT E FR E E

P R O CE D U R E

KEYTRAY

Flexural Strength (MPa)

ASTM D790

84.7

Flexural Modulus (MPa)

ASTM D790

1913

Tensile Stength (MPa)

ASTM D638

62.1

Tensile Young’s Modulus (MPa)

ASTM D638

2056

Elongation at Break (%)

ASTMD638

26.4

Shore D Hardness

86.5 D

PAIRS PERFECTLY WITH:

TAC®

Consistency VPS

Dispensing Gun

Bosworth Rimseal™

Check out our full line of impression materials at dental.keystoneindustries.com.

K EY PRI NT 1 9

AVAILABLE IN THE USA, CANADA, EU, AUS AND OTHER GLOBAL TERRITORIES “You can print these things all day long and not smell anything, the odorless feature is great. This is also the easiest to peel away of any of the different resins that we’ve ever tried for the indirect bond.” — BRANDON OWEN DDS, MS

Class I # 42000 0 8 ( 0 .5 k g b o tt l e) # 42200 0 8 ( 1 k g bot tl e) VI EW O U R KEY O RTH O IBT VIDE O!

Bio BIOCOMPATIBLE 2 0 KEYP R I NT

PRECISE

FLEXIBLE

ODORLESS

NON-STICK

KeyOrtho IBT ™™™ KeyOrtho IBT is ideal for printing orthodontic transfer trays for positioning brackets. KeyOrtho IBT’s translucency allows for precise positioning before and during bracket placement. Its high tensile strength allows for easy application of brackets in a single step, reducing chair time to minutes. It is flexible for easy removal, and works with all general bracket systems. It is also odorless and tasteless for patient comfort.

F E A T U RE S • BIO C O M P A TIBLE M EDIC A L D E V I C E • O DO R LES S & TA S TELES S • A DH ES IVES R ELEA S E EA S ILY F R O M T R AY • TR A N S LUC EN T F O R EA S Y PO S I T I O NI NG • P R EC IS E • F LEXIBLE • BP A , M M A & P H TH A LA TE F R E E

PROPERTY

PROCEDURE

KEYORTHO IBT

Tensile Strength (MPa)

ASTM D638

8.0 - 10.5

Tensile Young’s Modulus (MPa)

ASTM D638

15.5 - 31.0

Elongation at Break (%)

ASTM D638

> 130%

Biocompatibility

ISO 10993-5

Pass

Viscosity @ 25°C (cP)

ASTM D7867

<1000

Orthodontic Adhesive Release

Pass K EY PRI NT 2 1

K EY P R IN T WORK FLOW VALI DATI ON

Consumer Confidence in Safety & Efficacy 2 2 KEYP R I NT

K EY PRI NT 2 3

1

2

DESIGN

PRINT

OUR OPEN SOURCE PHILOSOPHY

PRINTER VALIDATIONS

Keystone is always profiling new printers to ensure that KeyPrint resins work reliably in as many open-source printers as possible. We can work with you to optimize your printer settings to work with KeyPrint, but Keystone does not guarantee high-quality print results from non-validated printers.

Choosing one of Keystone’s validated partner printers guarantees:

KeyPrint resins are designed to work in 385405 nm DLP, LED and LCD printers to best yield detailed parts faster and with superior accuracy. for customers looking to purchase resins designed for SLA and other printer technologies, Keystone is willing and able to discuss developing specialized resins for your system.

Printing settings tested and approved by Keystone’s Technical Team Optimal printing accuracy for all KeyPrint Resins Passing biocompatibility checks on medical device resins Technical support from both the Printer Partner and Keystone

DESIGN

We work with all open source dental design software: 3Shape

Dental Wings

Exocad

D3Tool

Blue Sky Bio VIEW KEYSTONE'S PRINTER VALIDATIONS 2 4 KEYP R I NT

3

4

POST WASH

POST CURE

POST WASH

POST CURE

Following Keystone’s validated post wash protocol is critical to a successful 3D printing digital workflow. All KeyPrint resins require post wash.

Similar to green-state zirconia, 3D printed parts require additional treatment after printing to ensure they have :

Keystone’s Recommended Post wash includes the following:

Optimize™ IPA 97%+ purity, following the 3 bath protocol listed in the material’s Instructions For Use (IFU) Submerged agitation is necessary to remove all residual resin. A soft brush is recommended to help with this process 3D Printed parts should be submerged for no more than 5 minutes total in the solvent

Biocompabtility for intraoral use Color stability Ideal physical properties All KeyPrint resins require UV Curing after post wash. Keystone publishes the validated post cure units and cure times to ensure the indicated devices are safe and effective.

NOTE: Nitrogen is not needed

It is recommended to use compressed air after post wash to ensure all residual resin and IPA is removed from the part Allow the KeyPrint parts to dry (covered) for at least 30 minutes before curing VIEW KEYSTONE'S VALIDATED POST CURE UNITS

K EY PRI NT 2 5

Lab A C C U R A T E, R EL I AB LE , AN D CON S I S TE N T

Laboratory Resins

2 6 KEYP R I NT

K EY PRI NT 2 7

I V ORY

#4220009 (1kg bottle) #42400 0 9 (4kg bottle)

L IGH T GREY

VI EW O U R KEYM ODE L U L TRA VI DEO!

#4220010 (1kg bottle) #42400 1 0 (4kg bottle)

2 8 KEYP R I NT

FLAWLESS SURFACE DETAIL

ULTRA-FAST TECHNOLOGY

THERMOFORMING RELEASE AGENT

KeyModel Ultra ™

™ ™™

KeyModel Ultra is a material designed for 3D printing of dental and orthodontic models.

F E A T URE S • H IG H - S P EED P R IN T F O R M UL AT I O N • IN TEG R A TED R ELEA S E A GE NT F O R EA S Y TH ER M O F O R M S EPAR AT I O N • TW O C O LO R S O P TIM IZED F O R S H A R P DETA IL • S M O O TH S UR F A C E F IN ISH • S TA BILITY IN P R O DU C TION W O R K F LO W • IN TEG R A TED W ITH A W ID E R ANG E O F 3D P R IN TER S

I DE A L FO R T HERMOFOR MING ALIG NE RS

PROPERTY

PROCEDURE

KEYMODEL ULTRA

Maximum Tensile Strength (MPa)

ASTM D638

50

Tensile Modulus (MPa)

ASTM D638

1700

Elongation at Break (%)

ASTM D638

51

Maximum Flexural Strength

ASTM D790

70

Flexural Modulus

ASTM D790

1940

Viscosity @ 25°C (cP)

ASTM D7867

500-600 K EY PRI NT 2 9

#4200006 (0.5kg bottle) #4220006 (1kg bottle)

ACCURATE 3 0 KEYP R I NT

LOW SHRINKAGE

EASY VISIBILITY

KeyModel

®

KeyModel produces highly precise and accurate dental

F E A T U RE S

models. Its low shrinkage formulation makes it an ideal

• C A R VA BLE W ITH O U T C H I PPI NG

resin for crown, bridge, and implant models, orthodontic

• C O LO R ED F O R EA S Y VI S I B I L I T Y O F

clear aligner models, and diagnostic modeling.

M A R G IN S A N D TO O TH ANAT O MY

OPTIMAL SCANNING

A C C U RA T E & PRE CI S E

P A I RS WI T H : PRO - F OR M ®

Models have smooth, hard surfaces for optimal scanning

Highly accurate detail in printing

Check out our line of Pro-form thermoforming materials at dental.keystoneindustries.com

PROCEDURE

KEYMODEL

Flexural Strength (MPa)

ASTM D790

79.6

Flexural Modulus (MPa)

ASTM D790

2293

Tensile Strength

ASTM D638

51

Young’s Modulus (MPa)

ASTM D638

1850

Elongation at Break (%)

ASTM D638

5.60%

Shore Hardness

Scale D

86

PROPERTY

K EY PRI NT 3 1

#4200003 (0.5kg bottle) #422 0 0 0 3 (1kg bottle)

ACCURATE 3 2 KEYP R I NT

LOW SHRINKAGE

HIGH-SPEED

KeyOrthoModel

®

KeyOrthoModel is designed for high-speed and accurate prints. Perfect for thermoforming aligners and orthodontic devices.

F E A T URE S • O P TIM IZED TO P R IN T @ 100 A N D 200μ m LA Y ER TH IC K N ES S F O R H IG H THR O UG H PUT • P R IN TS IN 1/2 TH E TIM E O F K EY M O DEL A T S A M E LA Y ER TH IC K N ES S • P A IR S W ITH P R O - F O R M ® • P ER F EC T F O R M A K IN G A L I G NE R S • W ITH S TA N DS TH ER M O F O R M IN G TEM PE R AT U R E S

PROPERTY

PROCEDURE

KEYORTHOMODEL

Flexural Strength (MPa)

ASTM D790

79.6

Flexural Modulus (MPa)

ASTM D790

2293

Tensile Strength

ASTM D638

51

Young’s Modulus (MPa)

ASTM D638

1850

Elongation at Break (%)

ASTM D638

5.60%

Shore Hardness

Scale D

86 K EY PRI NT 3 3

#4220002 (0.5kg bottle)

ACCURATE 3 4 KEYP R I NT

LOW SHRINKAGE

FLEXIBLE

SIMULATES GUM TISSUE

KeyMask

®

Flexible yet firm gingival mask that simulates the look and feel of gum tissue.

Incorporate KeyMask into your digital restoration planning.

FLEXIBLE YET FIRM

E A S I L Y T RI MME D

This gingival mask simulates the look and feel of gum tissue

Creates a proper emergence profile for pontic shape

PROPERTY

PROCEDURE

KEYMASK

Tensile Strength (MPa)

ASTM D638

2

Young’s Modulus (MPa)

ASTM D638

4.6

Elongation at Break (%)

ASTM D638

41% K EY PRI NT 3 5

“KeyCast prints well, with excellent detail needed for RPDs. It burnouts thoroughly and leaves no discernible residual ash. Once properly post-cured, it should slide into your existing equipment workflow for burnout and casting.” — BY KEN KINCAID CDT,TE

#4200000 (0.5kg bottle) #422 0 0 0 0 (1kg bottle)

ACCURATE 3 6 KEYP R I NT

LOW SHRINKAGE

ASH-FREE BURNOUT

KeyCast

®

KeyCast’s low shrinkage formula controls thermal expansion to yield porous-free and accurate castings. KeyCast is compatible with rapid burnout and gradual temperature ramp workflows, with no residual ash. It is used with chrome, cobalt, gold, and silver.

PROPERTY

PROCEDURE

KEYCAST

Flexural Strength (MPa)

ASTM D790

15

Flexural Modulus (MPa)

ASTM D790

340

Tensile Strength (MPa)

ASTM D638

9.1

Young’s Modulus (MPa)

ASTM D638

220

Elongation at Break (%)

ASTM D638

16%

CTE 0-150˚C (32-302˚F)

ASTM E831

168 x 10-6m/(m.˚C)

CTE 150-250˚C (302-482˚F)

ASTM E831

64 x 10-6m/(m.˚C)

CTE >250˚C (>482˚F)

ASTM E831

<0m/(m.˚C)

Shrinkage

ASTM D792

<2%

Burnout

<0.05%

PAIRS PERFECTLY WITH:

KeyVest™

Casting Rings

Sprue Wax

Microtorch

Green Flexiboles

Check out our full line of dental casting rings, waxes, mixing bowls and other accessories at dental.keystoneindustries.com.

K EY PRI NT 3 7

Accessories

3 8 KEYP R I NT

K EY PRI NT 3 9

DESCRI PTI O N

C O M P O NENT S

IT EM NU M B ER

KeyVest Universal Expansion Liquid

1 Liter Bottle

#1910901

KeyVest Universal Expansion CASE

5 x 1 Liter Bottle

#1910902

KeyVest Precision All in One Investment Powder

50 x 100g Bag

#1910903

KeyVest Precision All in One KIT

42 x 100g Bag & 1 Liter Bottle

#1910904

KeyVest Digital Precision All in One Kit

42 x 100g Bag & 1 Liter Bottle with 1Kg KeyCast®

#1910905

4 0 KEYP R I NT

KeyVest™ KeyVest is a universal dental investment that is

F E A T URE S

compatible with all dental alloys and pressable

• C O M P A TIBLE W ITH A LL P R ES S AB L E

ceramic systems. Its fine, phosphate-bonded formula gives you the accuracy and consistency you need for your lab to keep up with modern standards.

C ER A M IC S Y S TEM S A N D DEN T AL AL L O YS • O P TIM A L F O R 3D P R IN TIN G MAT E R I AL S , LIK E K EY C A S T • EA S Y IN VES TIN G W ITH M IN IM AL V I B R AT I O N • DEVES TS W ITH M IN IM A L BLA S T I NG

KeyVest’s smooth consistency and long working

• LO N G W O R K IN G TIM E

time allows for multiple rings to be poured at once, without forming bubbles. You’ll never have to worry about time constraints, since rings can be placed in a furnace any time after bench-set without fear of cracking.

Physical Properties • Liquid Powder Ratio: 22-24ml/100g • Setting Expansion: 1.7% • Working Time: ca. 6 minutes • Thermal Expansion: 1.1%

K EY PRI NT 4 1

Finishing and Polishing Materials ITEM NAME

ITEM NUMBER

KeyPolish™ Kit

#1009420

Mini Scotch Brite™

#1670092

400 Grit Blue Disc

#1670099

Course Grit Pumice*

#1700010

Muslin Buffs

#1180190 for 5” X 45 #1180170 for 4” X 42

Tripoli Polishing Compound

#1660030

Beige Polishing Paste (100g)

#1670175

High-Shine Cotton Buff

#1670140 or #1670510

High-Shine Polistar Pink (150g)

#1670546

* sold separately from kit 4 2 KEYP R I NT

PHOTO

VIEW KEYSPLINT FINISHING AND POLISHING RECOMMENDATIONS

BEFORE POLISHING

VIEW OUR POLISHING VIDEO

AFTER POLISHING

K EY PRI NT 4 3

KeyPrint® Kit Accessories

DENTURE 3D BASKETS

MICROFIBER CLOTH

PROFESSIONAL SPRUE CUTTER

1 1/2” STIFF PUTTY KNIFE

1 1/2” PRO CHISEL

#1220207

#1220201

#1220200

#1220210

#1220209

WASH BOTTLE 250 ML.

SMALL BOWL SCRAPER

TEKTON MALLET 8 OZ.

1 1/2" BRISTLE BRUSH

2 1/2" BRISTLE BRUSH

#1655413

#1220202

#1220208

#1220205

#1220206

4 4 KEYP R I NT

SCRATCH .016 NYLON BRUSH

6" POINT CURVED TWEEZERS

ALL PURPOSE UTILITY SCISSORS

#1220203

#1220204

#9139720

#4220010K Accessories Kit

K EY PRI NT 4 5

C O M PAT I B L E

KEYPRINT COMPATIBLE

• 11 UNIQUE R ESINS

Keystone is committed to expanding our

• 40 VALIDATED PR INT ER S

KeyPrint Compatible portfolio, providing an

• 18 VALIDATED CUR ING UNITS

unmatched selection of printers and curing

• 2, 000+ PRINT WOR K FLOWS VERIFIED

units to select from. Here’s what it means

• 240+ PASSING BIOCOMPATIBILITY TESTS,

to be KeyPrint Compatible:

4 6 KEYP R I NT

INCLUDING 50 FOR TH E KEYSPLINT FAMILY

Keystone has validated the following workflows as KeyPrint Compatible with select resins. All of our resins are compatible across DLP / LCD / LED from 385-405nm.

VI EW O U R L A TEST P RI NTER VA L I DA TI O NS K EY PRI NT 4 7

PRECISION 3D RESINS

To view a full list of our validated printers and post-cure units, please visit: keyprint.keystoneindustries.com/printer-validation

BRACON Digital Dental Products

Bracon Limited • Unit C • Swife Business Park • Burwash Road • Broad Oak • Heathfield • East Sussex TN21 8UP t: +44 (0)1580 817000 e: sales@bracon.co.uk

www.bracon.co.uk