Recommended
Note:
1.MounttheMixerBodyinPlace Usingthescrews
2.EnsuretheMixerBodyislevel
3.Connectwatersupplyandwater outlet,testandcheckforleaks
1. If the pressure exceeds or l ke y to exceeds 550kpa, an approved pressure limit ng device must be installed
2. F ush Out al pipe work prior to installation
3. If the water temperature exceeds 75℃, an approved tempering valve must be fitted.
4. Instal ation should comply withAustralian StandardAS3500
Failure to comply with the above may void a l warranties
INSTALLATION INSTRUCTIONS
MAINTENANCEAND CARE:
1. Products Should be cleaned with mild liquid detergent or soap and water
2. Do not use cream cleaners or citrus based cleaning products, as they are abrasive
3. Use of unsuitable cleaning agents may damage the surface. any damage caused in th s way will not be covered by warranty
DIVERTER MIXER WITH DIVERTER USING FOR: Disclaimer While we aim to ensure the spec fications shown are correct at the time of printing,AtticaAustralia reserves the right to make modificat ons without prior not ce
1.Creattwosuitableholesincement sheetandtiles
2.Removetheprotectivecover,pushthe DressPlateontothebody
3.PushonthehandleandDiverterCup thenFastentheGrubScrew
4.FitCapinto position